Lorenzo Bianconi [Thu, 20 Sep 2018 09:12:03 +0000 (11:12 +0200)]
mt76x0: unify parse hw capabilities
Unify parse hw capabilities with mt76x2 driver using
mt76x02_eeprom_parse_hw_cap utility routine available
in mt76x02-lib module
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 20 Sep 2018 09:12:02 +0000 (11:12 +0200)]
mt76: move mt76x02_eeprom_parse_hw_cap in mt76x02-lib module
Move mt76x02_eeprom_parse_hw_cap utility routine in mt76x02-lib
module in order to be reused in mt76x0 driver
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 20 Sep 2018 09:12:01 +0000 (11:12 +0200)]
mt76x0: unify freq offset parsing
Unify frequency offset parsing with mt76x2 driver using
eeprom utility routines available in mt76x02-lib module
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 20 Sep 2018 09:12:00 +0000 (11:12 +0200)]
mt76x0: unify temperature offset parsing
Unify temperature offset parsing with mt76x2 driver using
eeprom utility routines available in mt76x02-lib module
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 20 Sep 2018 09:11:59 +0000 (11:11 +0200)]
mt76x0: unify rssi_offset parsing
Unify rssi_offset parsing with mt76x2 driver using eeprom utility
routines available in mt76x02-lib module
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 20 Sep 2018 09:11:58 +0000 (11:11 +0200)]
mt76x0: unify lna_gain parsing
Unify lna gain parsing with mt76x2 driver using eeprom utility
routines available in mt76x02-lib module
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 20 Sep 2018 09:11:57 +0000 (11:11 +0200)]
mt76: add mt76x02_get_rx_gain and mt76x02_get_lna_gain utility routines
Add mt76x02_get_rx_gain and mt76x02_get_lna_gain utility routines
for rx gain parsing. mt76x02_get_rx_gain and mt76x02_get_lna_gain
will be reused for eeprom parsing in mt76x0 driver
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 20 Sep 2018 09:11:56 +0000 (11:11 +0200)]
mt76x0: remove mt76x0_set_country_reg routine
Remove mt76x0_set_country_reg routine for the moment
since it is partial and it is not actually used
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 20 Sep 2018 09:11:55 +0000 (11:11 +0200)]
mt76: move mt76x2_ext_pa_enabled routine in mt76x02_eeprom.c
Move mt76x2_ext_pa_enabled utility routine in mt76x02_eeprom.c
and remove duplicated code. This is a preliminary patch to
unify eeprom code between mt76x2 and mt76x0 driver
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 20 Sep 2018 09:11:54 +0000 (11:11 +0200)]
mt76: move mt76x2_get_efuse_data in mt76x02-lib module
Move mt76x2_efuse_read and mt76x2_get_efuse_data in mt76x02_eeprom.c
in order to be reused in mt76x0 driver for eeprom parsing
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 20 Sep 2018 09:11:53 +0000 (11:11 +0200)]
mt76: move mt76x02_mac_setaddr in mt76x02-lib module
Move mt76x02_mac_setaddr utility routine in mt76x02-lib
module and remove duplicated code. This is a preliminary patch
to unify eeprom code between mt76x2 and mt76x0 driver
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 20 Sep 2018 09:11:52 +0000 (11:11 +0200)]
mt76: move mt76x2_eeprom_get in mt76x02_eeprom.h
Move mt76x2_eeprom_get utility routine in mt76x02_eeprom.h since
it will be used to parse mt76x0 eeprom in order to unify eeprom
support between mt76x2 and mt76x0 drivers
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 20 Sep 2018 09:11:51 +0000 (11:11 +0200)]
mt76: move eeprom utility routines in mt76x02_eeprom.h
Move shared eeprom utility routines in mt76x02_eeprom.h and
remove duplicated code
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 20 Sep 2018 09:11:50 +0000 (11:11 +0200)]
mt76: move common eeprom definitions in mt76x02-lib module
Move mt76x2 and mt76x0 common definitions in mt76x02_eeprom.h
and remove duplicated code
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 20 Sep 2018 09:11:49 +0000 (11:11 +0200)]
mt76: add stbc entries to mt76_rate_power
Add stbc tx power eeprom parsing support for mt76x2 driver.
When writing power entries, make a distinction between rates that are
read from the same EEPROM value, but have separate register entries.
No effect on runtime behavior, but preparation for unification with mt76x0
and for placing restrictions on individual rate power limits
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 20 Sep 2018 09:11:48 +0000 (11:11 +0200)]
mt76: move seq_put_array in mt76-core module
Move seq_put_array utility routine in mt76-core module
in order to be reused in mt76x0 driver
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Wed, 19 Sep 2018 11:53:58 +0000 (13:53 +0200)]
mt76x0: pci: add fw uploading routine
Add pci load firmware routine. Move some shared mcu definitions
in mt76x02_mcu.h
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Wed, 19 Sep 2018 11:42:44 +0000 (13:42 +0200)]
mt76x0: pci: add mt7650 PCI ID
Add mt7650 PCI id found on ASUS rt-51ac to pci_device_id table
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Fri, 21 Sep 2018 13:57:50 +0000 (15:57 +0200)]
mt76x2: fix tx power configuration for VHT mcs 9
Fix tx power configuration for VHT 1SS/STBC mcs 9 since
in MT_TX_PWR_CFG_{8,9} mcs 8,9 bits are GENMASK(21,16) and
GENMASK(29,24) while GENMASK(15,6) are marked as reserved
Fixes:
7bc04215a66b ("mt76: add driver code for MT76x2e")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
YueHaibing [Tue, 11 Sep 2018 12:28:24 +0000 (12:28 +0000)]
qtnfmac: remove set but not used variable 'vif'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/wireless/quantenna/qtnfmac/cfg80211.c: In function 'qtnf_dump_survey':
drivers/net/wireless/quantenna/qtnfmac/cfg80211.c:694:19: warning:
variable 'vif' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Takashi Iwai [Thu, 13 Sep 2018 06:15:17 +0000 (08:15 +0200)]
brcmsmac: Use kvmalloc() for ucode allocations
The ucode chunk might be relatively large and the allocation with
kmalloc() may fail occasionally. Since the data isn't DMA-transferred
but by manual loops, we can use vmalloc instead of kmalloc.
For a better performance, though, kvmalloc() would be the best choice
in such a case, so let's replace with it.
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1103431
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
YueHaibing [Tue, 11 Sep 2018 03:24:04 +0000 (11:24 +0800)]
brcmfmac: remove set but not used variables 'sfdoff' and 'pad_size'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c: In function 'brcmf_sdio_rxglom':
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:1466:11: warning:
variable 'sfdoff' set but not used [-Wunused-but-set-variable]
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c: In function 'brcmf_sdio_bus_preinit':
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3408:7: warning:
variable 'pad_size' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
zhong jiang [Sat, 8 Sep 2018 13:40:43 +0000 (21:40 +0800)]
brcm80211: remove redundant condition check before debugfs_remove_recursive
debugfs_remove_recursive has taken IS_ERR_OR_NULL into account. So just
remove the condition check before debugfs_remove_recursive.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Arend van Spriel [Wed, 5 Sep 2018 07:48:59 +0000 (09:48 +0200)]
brcmfmac: increase buffer for obtaining firmware capabilities
When obtaining the firmware capability a buffer is provided of 512
bytes. However, if all features in firmware are supported the buffer
needs to be 565 bytes as otherwise truncated information is retrieved
from firmware. Increasing the buffer to 768 bytes on stack.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Arend van Spriel [Wed, 5 Sep 2018 07:48:58 +0000 (09:48 +0200)]
brcmfmac: fix for proper support of 160MHz bandwidth
Decoding of firmware channel information was not complete for 160MHz
support. This resulted in the following warning:
WARNING: CPU: 2 PID: 2222 at .../broadcom/brcm80211/brcmutil/d11.c:196
brcmu_d11ac_decchspec+0x2e/0x100 [brcmutil]
Modules linked in: brcmfmac(O) brcmutil(O) sha256_generic cfg80211 ...
CPU: 2 PID: 2222 Comm: kworker/2:0 Tainted: G O
4.17.0-wt-testing-x64-00002-gf1bed50 #1
Hardware name: Dell Inc. Latitude E6410/07XJP9, BIOS A07 02/15/2011
Workqueue: events request_firmware_work_func
RIP: 0010:brcmu_d11ac_decchspec+0x2e/0x100 [brcmutil]
RSP: 0018:
ffffc90000047bd0 EFLAGS:
00010206
RAX:
000000000000e832 RBX:
ffff8801146fe910 RCX:
ffff8801146fd3c0
RDX:
0000000000002800 RSI:
0000000000000070 RDI:
ffffc90000047c30
RBP:
ffffc90000047bd0 R08:
0000000000000000 R09:
ffffffffa0798c80
R10:
ffff88012bca55e0 R11:
ffff880110a4ea00 R12:
ffff8801146f8000
R13:
ffffc90000047c30 R14:
ffff8801146fe930 R15:
ffff8801138e02e0
FS:
0000000000000000(0000) GS:
ffff88012bc80000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f18ce8b8070 CR3:
000000000200a003 CR4:
00000000000206e0
Call Trace:
brcmf_setup_wiphybands+0x212/0x780 [brcmfmac]
brcmf_cfg80211_attach+0xae2/0x11a0 [brcmfmac]
brcmf_attach+0x1fc/0x4b0 [brcmfmac]
? __kmalloc+0x13c/0x1c0
brcmf_pcie_setup+0x99b/0xe00 [brcmfmac]
brcmf_fw_request_done+0x16a/0x1f0 [brcmfmac]
request_firmware_work_func+0x36/0x60
process_one_work+0x146/0x350
worker_thread+0x4a/0x3b0
kthread+0x102/0x140
? process_one_work+0x350/0x350
? kthread_bind+0x20/0x20
ret_from_fork+0x35/0x40
Code: 66 90 0f b7 07 55 48 89 e5 89 c2 88 47 02 88 47 03 66 81 e2 00 38
66 81 fa 00 18 74 6e 66 81 fa 00 20 74 39 66 81 fa 00 10 74 14 <0f>
0b 66 25 00 c0 74 20 66 3d 00 c0 75 20 c6 47 04 01 5d c3 66
---[ end trace
550c46682415b26d ]---
brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 50
This patch adds the missing stuff to properly handle this.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Kalle Valo [Thu, 20 Sep 2018 11:15:40 +0000 (14:15 +0300)]
Merge tag 'mt76-for-kvalo-2018-09-19' of https://github.com/nbd168/wireless
mt76 patches for 4.20
* lots of mt76x0 cleanups / fixes
* mt76x2u fixes
* unify code between mt76x0, mt76x2e and mt76x2u
* rename mt76x0 to mt76x0u
* improve rx buffer allocation for all variants
* prepare for adding mt76x0e (pci-e variant) support
add CONFIG_MT76x0E kconfig symbol
Lorenzo Bianconi [Wed, 12 Sep 2018 15:19:36 +0000 (17:19 +0200)]
mt76x0: usb: remove mt76_fw definition
Remove mt76_fw dependency from mt76x0u_upload_firmware routine since
it does not define firmware layout properly. Moreover use mt76_poll_msec
utility routine to check if the fw is properly running
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Tue, 11 Sep 2018 21:09:30 +0000 (23:09 +0200)]
mt76x0: remove unused usb header file
Remove unused usb header file and move mt76x0 firmware definition
in usb.c
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Tue, 11 Sep 2018 21:09:29 +0000 (23:09 +0200)]
mt76x0: remove mcu source file
Remove mcu.c source file since it contains just 'one-line' function
that is shared between PCI and USB code
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Tue, 11 Sep 2018 21:09:28 +0000 (23:09 +0200)]
mt76x0: usb: move firmware loading to usb.c
Firmware loading is usb specific, move it to usb.c file.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 13 Jul 2018 14:26:15 +0000 (16:26 +0200)]
mt76: use a per rx queue page fragment cache
Using the NAPI or netdev frag cache along with other drivers can lead to
32 KiB pages being held for a long time, despite only being used for
very few page fragments.
This can happen if the driver grabs one or two fragments for rx ring
refill, while other drivers use (and free up) the remaining fragments.
The 32 KiB higher-order page can only be freed once all users have freed
their fragments.
Depending on the traffic patterns, this can waste a lot of memory and
look a lot like a memory leak.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sun, 9 Sep 2018 21:58:05 +0000 (23:58 +0200)]
mt76x2: move mt76x2_phy_tssi_compensate in mt76x2-common module
Move mt76x2_phy_tssi_compensate routine in mt76x2-common module
since it is shared between mt76x2 and mt76x2u drivers
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sun, 9 Sep 2018 21:58:04 +0000 (23:58 +0200)]
mt76: move shared mcu_calibrate routine in mt76x02-lib module
Move mcu_calibrate routine in mt76x02-lib module since it is
shared between USB and PCI code. Moreover remove duplicated
code
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sun, 9 Sep 2018 21:58:03 +0000 (23:58 +0200)]
mt76x2: move mt76x2 mcu shared code in mt76x2_mcu_common.c
Move shared mt76x2 {pcie/usb} mcu shared code in a common file
and remove duplicated code
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sun, 9 Sep 2018 21:58:02 +0000 (23:58 +0200)]
mt76: move mt76{0,2} mcu shared code in mt76x02_mcu.c
Move shared mt76x2/mt76x0 mcu shared code in a common file
and remove duplicated code
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sun, 9 Sep 2018 21:58:01 +0000 (23:58 +0200)]
mt76: unify firmware header between mt76x0 and mt76x2
Move mt76x2_fw_header definition in mt76x02_mcu.h and remove
duplicated code
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sun, 9 Sep 2018 21:58:00 +0000 (23:58 +0200)]
mt76x2: use common helpers for mcu_alloc_msg()/mcu_send_msg()
Use mcu common helpers instead of mt76x2 specific routines for
mcu_alloc_msg()/mcu_send_msg(). This is a preliminary patch to
unify mt76e and mt76u mcu code
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sun, 9 Sep 2018 21:57:59 +0000 (23:57 +0200)]
mt76x2: use mt76_dev instead of mt76x2_dev in mt76x2_mcu_msg_send
Use mt76_dev data structure instead of mt76x2_dev one in mt76x2_mcu_msg_send
and mt76x2_mcu_get_response routines. Moreover add wait_resp parameter to
mt76x2_mcu_msg_send signature. This is a preliminary patch in order to unify
mcu_msg_alloc()/mcu_msg_send() between pcie and usb code
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sun, 9 Sep 2018 21:57:58 +0000 (23:57 +0200)]
mt76: move __iomem regs in mt76_mmio
Move __iomem regs pointer in mt76_mmio data structure
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sun, 9 Sep 2018 21:57:57 +0000 (23:57 +0200)]
mt76: introduce mmio data structure in mt76_dev
Introduce mt76_mmio data structure in mt76_dev and
move mt76x2_mcu in mt76_mmio. This is a preliminary
patch to unify mcu code between mt76x02{e,u} drivers
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sun, 9 Sep 2018 21:57:56 +0000 (23:57 +0200)]
mt76x2: remove leftover mt76u_buf data structure in mt76x2_mcu
Remove unused usb buffer in mt76x2_mcu data structure
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sun, 9 Sep 2018 21:57:55 +0000 (23:57 +0200)]
mt76x2: use mt76_dev instead of mt76x2_dev in mt76x2_tx_queue_mcu
Use mt76_dev data structure instead of mt76x2_dev one in
mt76x2_tx_queue_mcu routine. This is a preliminary patch
to share mcu code between mt76x2e and mt76x0e
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sun, 9 Sep 2018 21:57:54 +0000 (23:57 +0200)]
mt76: usb: remove skb check in mt76x{0,2}u mcu routines
Remove mt76_mcu_msg_alloc return value check since it is already
evaluated in __mt76x02u_mcu_send_msg
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Sun, 9 Sep 2018 20:32:46 +0000 (22:32 +0200)]
mt76x0: remove mt76x0_burst_write_regs()
We don't need to use custom burst write regs via MCU, we can use
generic mt76_wr_copy() for the same purpose.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Sun, 9 Sep 2018 20:32:45 +0000 (22:32 +0200)]
mt76x0: remove unused mt76x0_burst_read_regs
mt76x0_burst_read_regs is not used, but keep it for eventual use. Since
we have this function now in the driver git history, we can remove it and
eventually revert this commit it the function will be needed.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sun, 9 Sep 2018 20:32:44 +0000 (22:32 +0200)]
mt76x02: add static qualifier to mt76x02_remove_dma_hdr
Add static qualifier to mt76x02_remove_dma_hdr routine and
do not export the symbol since it is only used in mt76x02_util.c
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sun, 9 Sep 2018 20:32:43 +0000 (22:32 +0200)]
mt76x02: move TXD/RXD/MCU definitions in mt76x02_dma.h
Introduce mt76x02_dma.h header file to contain mt76x02 dma
related definitions
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sun, 9 Sep 2018 20:32:42 +0000 (22:32 +0200)]
mt76: usb: move mt76u_skb_dma_info in mt76x02_usb_core.c
Move mt76u_skb_dma_info routine in mt76x02-usb module and rename it in
mt76x02u_skb_dma_info. Moreover move mt76x02u_set_txinfo in
mt76x02_usb_core.c. This is a preliminary patch to move MT_TXD_INFO,
MT_MCU_MSG and MT_RX_FCE_INFO defs in mt76x02-lib module since other
chipsets (e.g. mt7603) use different dma definitions
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sun, 9 Sep 2018 20:32:41 +0000 (22:32 +0200)]
mt76: usb: move mt76x02 mcu code in mt76x02-usb module
Introduce mt76x02_usb_mcu.c in order to contain mt76x02u mcu related
code. Add mt76x02-usb module as a container for mt76x02 usb code.
This is a preliminary patch to move MT_TXD_INFO, MT_MCU_MSG and
MT_RX_FCE_INFO defs in mt76x02-lib module since other chipsets (e.g.
mt7603) use different dma definitions
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sun, 9 Sep 2018 20:32:40 +0000 (22:32 +0200)]
mt76: usb: use common helpers for mcu_alloc_msg()/mcu_send_msg()
Use mcu common helpers instead of usb specific routines.
Add static qualifier to the following functions:
- mt76u_mcu_msg_alloc
- __mt76u_mcu_send_msg
- mt76u_mcu_send_msg
- mt76u_mcu_wr_rp
- mt76u_mcu_rd_rp
- mt76u_wr_rp
- mt76u_rd_rp
This is a preliminary patch to move mt76x02 usb mcu code in
mt76x02-usb module
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Sun, 9 Sep 2018 20:32:39 +0000 (22:32 +0200)]
mt76: add rd_rp and wr_rp to bus_ops/mcu_ops
Add callbacks for reading and writing reg pairs tables.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Sun, 9 Sep 2018 20:32:38 +0000 (22:32 +0200)]
mt76: add usb implementation of {wr,rd}_rp
Add USB implementation for read and write reg pair routines.
The actual implementation can use mcu related routines according to
MCU state
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sun, 9 Sep 2018 20:32:37 +0000 (22:32 +0200)]
mt76: add mt76_mcu_ops data structure for mcu related pointers
Introduce mt76_mcu_ops data structure to contain mcu related function
pointers. This is a preliminary patch to move mt76x02 usb mcu code in
mt76x02-usb module
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sun, 9 Sep 2018 20:32:36 +0000 (22:32 +0200)]
mt76: move mt76x0 and mt76x2 mcu shared defs in mt76x02_mcu.h
Move mt76x0 and mt76x2 mcu shared definition in mt76x02_mcu.h
and remove duplicated code
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Fri, 7 Sep 2018 21:13:12 +0000 (23:13 +0200)]
mt76x0: run vco calibration for each channel configuration
According to vendor sdk, vco calibration has to be executed
for each channel configuration whereas mcu calibration has to be
performed during channel scanning. This patch fixes the mt76x0
monitor mode issue since in that configuration vco calibration
was never executed
Fixes:
10de7a8b4ab9 ("mt76x0: phy files")
Tested-by: Sid Hayn <sidhayn@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Thu, 6 Sep 2018 09:18:58 +0000 (11:18 +0200)]
mt76x0: make device allocation bus neutral
Remove some USB specific code form mt76x0_alloc_device.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Thu, 6 Sep 2018 09:18:57 +0000 (11:18 +0200)]
mt76x0: remove some usb specific code from mt76x0_register_device
Initial effort to make mt76x0_register_device bus neutral.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Thu, 6 Sep 2018 09:18:56 +0000 (11:18 +0200)]
mt76x0: remove unused mt76x0_wcid
We do not use mt76x0_wcid any longer.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Thu, 6 Sep 2018 09:18:53 +0000 (11:18 +0200)]
mt76x0: inital split between pci and usb
For now pci driver can read ASIC version from the device :-)
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:52 +0000 (11:18 +0200)]
mt76x0: use mt76_register_device for device registration
Use mt76_register_device routine for device registration.
mt76_register_device allows to enable VHT support on 5GHz band.
Overwrite unsupported vht features with mt76x0_vht_cap_mask routine.
Remove macaddr field of mt76x0_dev data structure and
use the mt76_dev one. Moreover remove following unused routines:
- mt76_init_sband
- mt76_init_sband_2g
- mt76_init_sband_5g
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:51 +0000 (11:18 +0200)]
mt76x0: remove has_{2,5}ghz fields of mt76x0_eeprom_params
Remove has_2ghz/has_5ghz fields of mt76x0_eeprom_params data
structure and use mt76_dev ones. This is a preliminary patch
to use shared routines for device allocation
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:50 +0000 (11:18 +0200)]
mt76x0: do not free/alloc buffers during suspend/resume
Do not free/alloc {tx,rx} buffers during suspend/resume phases
but use the ones previously allocated during hw probe.
Move {tx,rx}/mcu buffers allocation from mt76x0_init_hardware routine
to mt76x0_register_device
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:49 +0000 (11:18 +0200)]
mt76x0: move mt76x0_init_hardware in mt76x0_register_device
Move mt76x0_init_hardware routine in mt76x0_register_device
during hw probe. This is a preliminary patch to avoid {tx/rx}
buffer allocation during resume/suspend
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:48 +0000 (11:18 +0200)]
mt76x0: move stop related routines in mt76x0_mac_stop
Move tear-down routines in mt76x0_mac_stop function.
mt76x0_mac_stop routines will be reused in mt76x0_suspend
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:47 +0000 (11:18 +0200)]
mt76x0: fix memory leak during hw probe
Fix memory leak during hw probe if mt76x0_register_device fails
since MT76_STATE_INITIALIZED has not set yet and mt76x0_cleanup
does not free tx/rx queues and mcu buffers
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:46 +0000 (11:18 +0200)]
mt76x0: alloc mcu buffers first in mt76x0_mcu_cmd_init
swap mt76u_mcu_init_rx and mt76x0_mcu_function_select in
mt76x0_mcu_cmd_init routine in order to allocate mcu buffers
first and then send mcu commands
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:45 +0000 (11:18 +0200)]
mt76: move mt76 rate definitions in mt76x02-lib module
Move mt76x2_rate definition in mt76x02-lib module and rename it in
mt76x02_rates in order to be reused in mt76x0 driver.
Moreover remove unused mt76_rate definition
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:44 +0000 (11:18 +0200)]
mt76x0: remove mt76x0_stop_hardware routine
Since it is actually used in a single place and it just
runs mt76x0_chip_onoff routine, remove mt76x0_stop_hardware
and use mt76x0_chip_onoff directly
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:43 +0000 (11:18 +0200)]
mt76: remove unused MT76_MORE_STATS state
Remove no longer used hw state
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Thu, 6 Sep 2018 09:18:42 +0000 (11:18 +0200)]
mt76x0: trim rx skb to proper length
We need to truncate skb to proper length. This fix below message:
wlan0: associating with AP with corrupt beacon and probe response
Fixes:
9d87d9fad47e ("mt76x0: unify tx/rx datapath with mt76x2u driver")
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:41 +0000 (11:18 +0200)]
mt76x0: init hw capabilities
Enable hw capabilities supported by mt76-usb layer
- fast_xmit
- tx/rx amsdu
- MFP
- non-linear tx skbs
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:40 +0000 (11:18 +0200)]
mt76x0: enable per-sta tx queueing
Initialize wake_tx_queue function pointer in ieee80211_ops
in order to enable per-sta tx queueing. Moreover set driver
private txq size
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:39 +0000 (11:18 +0200)]
mt76x0: remove unused stat_work
Remove unused definition of stat_work delayed_work definition and
related flush/cancel routines
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:38 +0000 (11:18 +0200)]
mt76x0: remove unused endpoint definitions
remove unused usb endpoint definitions since mt76x0
uses mt76-usb ones. Moreover remove unused usb_ctrl mutex
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:37 +0000 (11:18 +0200)]
mt76x0: remove unused mt76x0_tx_status routine
Remove no longer used mt76x0_tx_status routine since
mt76x0 driver uses mt76-usb utility routines to report tx-feedbacks
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:36 +0000 (11:18 +0200)]
mt76x0: remove unused {tx/rx}_queue definitions
Remove unused tx_queue and rx_queue definitions since
now mt76x0 driver uses mt76-usb {tx/rx}_queues
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:35 +0000 (11:18 +0200)]
mt76x0: remove unused stat work_queue
Remove unused tx_status workqueue since now tx feedbacks are
processed by mt76-usb layer
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:34 +0000 (11:18 +0200)]
mt76x0: remove unused dma.c source file
Remove unused dma.c source file since dma related routines are no
longer used
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:33 +0000 (11:18 +0200)]
mt76x0: set max fragments size
Set maximum number of tx fragments according to usb controller
features
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:32 +0000 (11:18 +0200)]
mt76x0: stop stat workqueue at hw stop
Cancel tx status workqueue during vif teardown
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:31 +0000 (11:18 +0200)]
mt76x0: unify tx/rx datapath with mt76x2u driver
Use mt76/mt76-usb shared routine for tx/rx datapath.
Initialize mt76-usb tx/rx queues in mt76x0_init_hardware and
deallocate them in mt76x0_cleanup routine.
Moreover remove data padding in mt76_mac_process_rx routine.
Furthermore remove unused skb2q routine
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:26 +0000 (11:18 +0200)]
mt76x0: use mt76_alloc_device for device allocation
Use mt76_alloc_device utility routine for mt76x0_dev/mt76_dev
allocation
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:25 +0000 (11:18 +0200)]
mt76x0: init mt76_driver_ops callbacks
Init mt76_driver_ops callbacks in mt76x0_alloc_device.
mt76_driver_ops callbacks will be used by mt76-usb module
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:30 +0000 (11:18 +0200)]
mt76x0: add mt76x0_queue_rx_skb routine
Introduce mt76x0_queue_rx_skb routine as mt76x0 driver
frame rx handler. mt76x0_queue_rx_skb will be run by mt76-usb layer
rx datapath
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:29 +0000 (11:18 +0200)]
mt76x0: simplify mt76_mac_process_rx signature
Remove data pointer from mt76_mac_process_rx routine signature
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:28 +0000 (11:18 +0200)]
mt76x0: mark device as running in mt76x0_start
Set MT76_STATE_RUNNING flag in mt76x0_start routine and
clear it in mt76x0_stop one
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:27 +0000 (11:18 +0200)]
mt76x0: disable usb rx bulk aggregation
In order to use zero-copying, disable usb rx bulk aggregation
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:24 +0000 (11:18 +0200)]
mt76: move mt76x2u_tx_status_data in mt76x02-lib module
Move mt76x2u_tx_status_data routine in mt76x02-lib module and rename it
in mt76x02_tx_status_data in order to be reused in mt76x0 driver
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:23 +0000 (11:18 +0200)]
mt76x0: introduce mt76x0_tx_prepare_skb routine
Add mt76x0_tx_prepare_skb routine as tx txwi handler.
mt76x0_tx_prepare_skb will be used by mt76-usb layer
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:22 +0000 (11:18 +0200)]
mt76: move mt76x2u_set_txinfo in mt76x02-lib module
Move mt76x2u_set_txinfo routine in mt76x02-lib module and rename it in
mt76x02_set_txinfo in order to be reused in mt76x0 driver
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:21 +0000 (11:18 +0200)]
mt76: move mt76_qsel definition in dma.h
Move mt76_qsel definition in dma.h in order to be reused in mt76x0
driver. Moreover remove empty mt76x2_dma.h header file
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:20 +0000 (11:18 +0200)]
mt76: move mt76x2u_tx_complete_skb in mt76x02-lib moudule
Move mt76x2u_tx_complete_skb routine in mt76x02-lib module
and rename it in mt76x02_tx_complete_skb in order to be reused
in mt76x0 driver
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:19 +0000 (11:18 +0200)]
mt76: move mt76x2u_remove_dma_hdr in mt76x02-lib module
Move mt76x2u_remove_dma_hdr in mt76x02-lib module and rename it in
mt76x02_remove_dma_hdr. Moreover use mt76x02_remove_hdr_pad routine
in mt76x02_remove_dma_hdr function.
Furthermore remove mt76x0_tx_skb_remove_dma_overhead routine
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:18 +0000 (11:18 +0200)]
mt76: move mt76x2_tx_complete routine in mt76x02-lib module
Move mt76x2_tx_complete routine in mt76x02-lib module and rename it in
mt76x02_tx_complete in order to be used in mt76x0 driver
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 6 Sep 2018 09:18:17 +0000 (11:18 +0200)]
mt76x2: change mt76x2_tx_complete routine signature
Use mt76_dev instead of mt76x2_dev in mt76x2_tx_complete signature
in order to be reused in mt76x0 driver
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Tue, 4 Sep 2018 14:41:15 +0000 (16:41 +0200)]
mt76: partially unify filling txwi fields
Merge code filing txwi fields the same way on mt76x0 and mt76x2.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Tue, 4 Sep 2018 14:41:14 +0000 (16:41 +0200)]
mt76: unify {insert/remove}_hdr_pad
Merge insert/remove _hdr_pad from mt76x0 and mt76x2.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Tue, 4 Sep 2018 14:41:13 +0000 (16:41 +0200)]
mt76x0: reserve enough space in mac80211
Allocate skg with enough headroom by mac80211 , this eliminate need
to add extra skb headroom by the mt76x0 driver.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Tue, 4 Sep 2018 14:41:12 +0000 (16:41 +0200)]
mt76: unify mac_process_rate
Merge mac_process_rate from mt76x0 and mt76x2.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Tue, 4 Sep 2018 14:41:11 +0000 (16:41 +0200)]
mt76: use mt76_rx_status in mt76x0
Make rx status processing similar to mt76x2.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>