x86: Add text_poke_smp for SMP cross modifying code

Add generic text_poke_smp for SMP which uses stop_machine()
to synchronize modifying code.
This stop_machine() method is officially described at "7.1.3
Handling Self- and Cross-Modifying Code" on the intel's
software developer's manual 3A.

Since stop_machine() can't protect code against NMI/MCE, this
function can not modify those handlers. And also, this function
is basically for modifying multibyte-single-instruction. For
modifying multibyte-multi-instructions, we need another special
trap & detour code.

This code originaly comes from immediate values with
stop_machine() version. Thanks Jason and Mathieu!

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Anders Kaseorg <andersk@ksplice.com>
Cc: Tim Abbott <tabbott@ksplice.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
LKML-Reference: <20100225133438.6725.80273.stgit@localhost6.localdomain6>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

kprobes/x86: Cleanup save/restore registers

Introduce SAVE/RESOTRE_REGS_STRING for cleanup
kretprobe-trampoline asm code. These macros will be used for
emulating interruption.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Anders Kaseorg <andersk@ksplice.com>
Cc: Tim Abbott <tabbott@ksplice.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
LKML-Reference: <20100225133430.6725.83342.stgit@localhost6.localdomain6>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

kprobes/x86: Boost probes when reentering

Integrate prepare_singlestep() into setup_singlestep() to boost
up reenter probes, if possible.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Anders Kaseorg <andersk@ksplice.com>
Cc: Tim Abbott <tabbott@ksplice.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
LKML-Reference: <20100225133423.6725.12071.stgit@localhost6.localdomain6>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

kprobes: Jump optimization sysctl interface

Add /proc/sys/debug/kprobes-optimization sysctl which enables
and disables kprobes jump optimization on the fly for debugging.

Changes in v7:
 - Remove ctl_name = CTL_UNNUMBERED for upstream compatibility.

Changes in v6:
- Update comments and coding style.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Anders Kaseorg <andersk@ksplice.com>
Cc: Tim Abbott <tabbott@ksplice.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
LKML-Reference: <20100225133415.6725.8274.stgit@localhost6.localdomain6>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

kprobes: Introduce kprobes jump optimization

Introduce kprobes jump optimization arch-independent parts.
Kprobes uses breakpoint instruction for interrupting execution
flow, on some architectures, it can be replaced by a jump
instruction and interruption emulation code. This gains kprobs'
performance drastically.

To enable this feature, set CONFIG_OPTPROBES=y (default y if the
arch supports OPTPROBE).

Changes in v9:
 - Fix a bug to optimize probe when enabling.
 - Check nearby probes can be optimize/unoptimize when disarming/arming
   kprobes, instead of registering/unregistering. This will help
   kprobe-tracer because most of probes on it are usually disabled.

Changes in v6:
 - Cleanup coding style for readability.
 - Add comments around get/put_online_cpus().

Changes in v5:
 - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex
   deadlock.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Anders Kaseorg <andersk@ksplice.com>
Cc: Tim Abbott <tabbott@ksplice.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

kprobes: Introduce generic insn_slot framework

Make insn_slot framework support various size slots.
Current insn_slot just supports one-size instruction buffer
slot. However, kprobes jump optimization needs larger size
buffers.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Anders Kaseorg <andersk@ksplice.com>
Cc: Tim Abbott <tabbott@ksplice.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
LKML-Reference: <20100225133358.6725.82430.stgit@localhost6.localdomain6>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Anders Kaseorg <andersk@ksplice.com>
Cc: Tim Abbott <tabbott@ksplice.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>

kprobes/x86: Cleanup RELATIVEJUMP_INSTRUCTION to RELATIVEJUMP_OPCODE

Change RELATIVEJUMP_INSTRUCTION macro to RELATIVEJUMP_OPCODE
since it represents just the opcode byte.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Anders Kaseorg <andersk@ksplice.com>
Cc: Tim Abbott <tabbott@ksplice.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
LKML-Reference: <20100225133349.6725.99302.stgit@localhost6.localdomain6>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf annotate: Defer allocating sym_priv->hist array

Because symbol->end is not fixed up at symbol_filter time, only
after all symbols for a DSO are loaded, and that, for asm
symbols, may be bogus, causing segfaults when hits happen in
these symbols.

Reported-by: David Miller <davem@davemloft.net>
Reported-by: Anton Blanchard <anton@samba.org>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: <stable@kernel.org> # for .33.x. Does not apply cleanly, needs backport.
LKML-Reference: <20100225155740.GB8553@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf symbols: Improve debugging information about symtab origins

Be more clear about DSO long names and tell from which file
kernel symbols were obtained, all in --verbose mode:

    [root@mica ~]# perf report -v > /dev/null
    Looking at the vmlinux_path (5 entries long)
    Using /lib/modules/2.6.33-rc8-tip-00777-g0918527-dirty/build/vmlinux for symbols
    [root@mica ~]# mv /lib/modules/2.6.33-rc8-tip-00777-g0918527-dirty/build/vmlinux /tmp/dd
    [root@mica ~]# perf report -v > /dev/null
    Looking at the vmlinux_path (5 entries long)
    Using /proc/kallsyms for symbols
    [root@mica ~]#

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1266866139-6361-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf top: Use a macro instead of a constant variable

To overcome a silly gcc warning:

 cc1: warnings being treated as errors
 builtin-top.c: In function ‘lookup_sym_source’:
 builtin-top.c:291: warning: not protecting local variables:
 variable length buffer make: *** [builtin-top.o] Error 1
 make: *** Waiting for unfinished jobs....

That is emitted for this:

const size_t pattern_len = BITS_PER_LONG / 4 + 2;
char pattern[pattern_len + 1];

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1266866062-6287-1-git-send-email-acme@infradead.org>
[ -v2: macroify the naming style ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf symbols: Check the right return variable

In function dso__split_kallsyms(), curr_map saves the return value
of map__new2. So check it instead of var map after the call returns.

Signed-off-by: Zhang Yanmin <yanmin_zhang@linux.intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: <stable@kernel.org> # for .33.x
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1267066851.1726.9.camel@localhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf/scripts: Tag syscall_name helper as not yet available

syscall_name() helper, which resolves a syscall arch number to
its name, is not yet available as we first need to implement
event injection for it to work.

Remove it from the documentation or tag its references as
unavailable yet. Once it's implemented, we can just revert
the current patch.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>

perf/scripts: Add perf-trace-python Documentation

Also small update to perf-trace-perl and perf-trace docs.

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1264580883-15324-13-git-send-email-tzanussi@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

perf/scripts: Remove unnecessary PyTuple resizes

If we know the size of a tuple in advance, there's no need to resize
it - start out with the known size in the first place.

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1266822779.6426.4.camel@tropicana>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

perf/scripts: Add syscall tracing scripts

Adds a set of scripts that aggregate system call totals and system
call errors.  Most are Python scripts that also test basic
functionality of the new Python engine, but there's also one Perl
script added for comparison and for reference in some new
Documentation contained in a later patch.

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1264580883-15324-8-git-send-email-tzanussi@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

perf/scripts: Add Python scripting engine

Add base support for Python scripting to perf trace.

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1264580883-15324-6-git-send-email-tzanussi@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

perf/scripts: Remove check-perf-trace from listed scripts

The check-perf-trace script only checks Perl functionality, and
doesn't really need to be listed as as user script anyway.

This only removes the '-report' shell script, so although it doesn't
appear in the listing, the '-record' shell script and the check perf
trace perl script itself is still available and can still be run
manually as such:

$ libexec/perf-core/scripts/perl/bin/check-perf-trace-record
$ perf trace -s libexec/perf-core/scripts/perl/check-perf-trace.pl

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1264580883-15324-6-git-send-email-tzanussi@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

perf/scripts: Move Perl scripting files to scripting-engines dir

Create a scripting-engines directory to contain scripting engine
implementation code, in anticipation of the addition of new scripting
support.  Also removes trace-event-perl.h.

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1264580883-15324-5-git-send-email-tzanussi@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

perf/scripts: Move common code out of Perl-specific files

This stuff is needed by all scripting engines; move it from the Perl
engine source to a more common place.

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1264580883-15324-4-git-send-email-tzanussi@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

perf/scripts: Fix bug in Util.pm

Fix bogus calculation.

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1264580883-15324-3-git-send-email-tzanussi@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

perf/scripts: Fix supported language listing option

'perf trace -s list' prints a list of the supported scripting
languages.  One problem with it is that it falls through and prints
the trace as well.  The use of 'list' for this also makes it easy to
confuse with 'perf trace -l', used for listing available scripts.  So
change 'perf trace -s list' to 'perf trace -s lang' and fixes the
fall-through problem.

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1264580883-15324-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

perf tools: Don't use parent comm if not set at fork time

As the parent comm then is worthless, confusing users about the
thread where the sample really happened, leading to think that
the sample happened in the parent, not where it really happened,
in the children of a thread for which a PERF_RECORD_COMM event
was not received.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1266627727-19715-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf symbols: Fix up map end too on modular kernels with no modules installed

In 2161db9 we stopped failing when not finding modules when
asked too, but then the kernel maps (just one, for vmlinux)
wasn't having its ->end field correctly set up, so symbols were
not being found for the vmlinux map because its range was 0-0.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1266702793-29434-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf record: Fix existing process callgraph symbol

When 'perf record -g' a existing process, even with debuginfo
packages, still cannnot get symbol from 'perf report'.

try:

 perf record -g -p `pidof xxx` -f
 perf report

    68.26%    :1181           b74870f2  [.] 0x000000b74870f2
              |
              |--32.09%-- 0xb73b5b44
              |          0xb7487102
              |          0xb748a4e2
              |          0xb748633d
              |          0xb73b41cd
              |          0xb73b4467
              |          0xb747d531

The reason is: for existing process, in __cmd_record(),
the pid is 0 rather than the existing process id.

Signed-off-by: Austin Zhang <austin_zhang@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4710.10.255.24.35.1265389362.squirrel@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86/alternatives: Fix build warning

Fixes these warnings:

 arch/x86/kernel/alternative.c: In function 'alternatives_text_reserved':
 arch/x86/kernel/alternative.c:402: warning: comparison of distinct pointer types lacks a cast
 arch/x86/kernel/alternative.c:402: warning: comparison of distinct pointer types lacks a cast
 arch/x86/kernel/alternative.c:405: warning: comparison of distinct pointer types lacks a cast
 arch/x86/kernel/alternative.c:405: warning: comparison of distinct pointer types lacks a cast

Caused by:

  2cfa197: ftrace/alternatives: Introducing *_text_reserved functions

Changes in v2:
  - Use local variables to compare, instead of type casts.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20100205171647.15750.37221.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf top: Use address pattern in lookup_sym_source

Because we may have aliases, like __GI___strcoll_l in
/lib64/libc-2.10.2.so that appears in objdump as:

$ objdump --start-address=0x0000003715a86420 \
           --stop-address=0x0000003715a872dc -dS /lib64/libc-2.10.2.so

0000003715a86420 <__strcoll_l>:
  3715a86420: 55                    push   %rbp
  3715a86421: 48 89 e5              mov    %rsp,%rbp
  3715a86424: 41 57                 push   %r15
[root@doppio linux-2.6-tip]#

So look for the address exactly at the start of the line instead
so that annotation can work for in these cases.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265550376-12665-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf top: Fix annotate for userspace

First, for programs and prelinked libraries, annotate code was
fooled by objdump output IPs (src->eip in the code) being
wrongly converted to absolute IPs. In such case there were no
conversion needed, but in

   src->eip = strtoull(src->line, NULL, 16);
   src->eip = map->unmap_ip(map, src->eip); // = eip + map->start - map->pgoff

we were reading absolute address from objdump (e.g. 8048604) and
then almost doubling it, because eip & map->start are
approximately close for small programs.

Needless to say, that later, in record_precise_ip() there was no
matching with real runtime IPs.

And second, like with `perf annotate` the problem with
non-prelinked *.so was that we were doing rip -> objdump address
conversion wrong.

Also, because unlike `perf annotate`, `perf top` code does
annotation based on absolute IPs for performance reasons(*), new
helper for mapping objdump addresse to IP is introduced.

(*) we get samples info in absolute IPs, and since we do lots of
    hit-testing on absolute IPs at runtime in record_precise_ip(), it's
    better to convert objdump addresses to IPs once and do no conversion
    at runtime.

I also had to fix how objdump output is parsed (with hardcoded
8/16 characters format, which was inappropriate for ET_DYN dsos
with small addresses like '4ac')

Also note, that not all objdump output lines has associtated
IPs, e.g. look at source lines here:

    000004ac <my_strlen>:
    extern "C"
    int my_strlen(const char *s)
     4ac:   55                      push   %ebp
     4ad:   89 e5                   mov    %esp,%ebp
     4af:   83 ec 10                sub    $0x10,%esp
    {
        int len = 0;
     4b2:   c7 45 fc 00 00 00 00    movl   $0x0,-0x4(%ebp)
     4b9:   eb 08                   jmp    4c3 <my_strlen+0x17>

        while (*s) {
            ++len;
     4bb:   83 45 fc 01             addl   $0x1,-0x4(%ebp)
            ++s;
     4bf:   83 45 08 01             addl   $0x1,0x8(%ebp)

So we mark them with eip=0, and ignore such lines in annotate
lookup code.

Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
[ Note: one hunk of this patch was applied by Mike in 57d8188 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1265550376-12665-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

kprobes: Add mcount to the kprobes blacklist

Since mcount function can be called from everywhere,
it should be blacklisted. Moreover, the "mcount" symbol
is a special symbol name. So, it is better to put it in
the generic blacklist.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100205062433.3745.36726.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf tools: Fix session init on non-modular kernels

perf top and perf record refuses to initialize on non-modular kernels:
refuse to initialize:

 $ perf top -v
  map_groups__set_modules_path_dir: cannot open /lib/modules/2.6.33-rc6-tip-00586-g398dde3-dirty/

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf tools: Clean up O_LARGEFILE et al usage

Setting _FILE_OFFSET_BITS and using O_LARGEFILE, lseek64, etc,
is redundant. Thanks H. Peter Anvin for pointing it out.

So, this patch removes O_LARGEFILE, lseek64, etc.

Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4B6A8972.3070605@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_events, x86: Fix bug in hw_perf_enable()

We cannot assume that because hwc->idx == assign[i], we can avoid
reprogramming the counter in hw_perf_enable().

The event may have been scheduled out and another event may have been
programmed into this counter. Thus, we need a more robust way of
verifying if the counter still contains config/data related to an event.

This patch adds a generation number to each counter on each cpu. Using
this mechanism we can verify reliabilty whether the content of a counter
corresponds to an event.

Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4b66dc67.0b38560a.1635.ffffae18@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

bitops: Ensure the compile time HWEIGHT is only used for such

Avoid accidental misuse by failing to compile things

Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_events, x86: Implement intel core solo/duo support

Implement Intel Core Solo/Duo, aka.
Intel Architectural Performance Monitoring Version 1.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_events: Optimize perf_event_task_tick()

Pretty much all of the calls do perf_disable/perf_enable cycles, pull
that out to cut back on hardware programming.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

ftrace: Remove record freezing

Remove record freezing. Because kprobes never puts probe on
ftrace's mcount call anymore, it doesn't need ftrace to check
whether kprobes on it.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: przemyslaw@pawelczyk.it
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100202214925.4694.73469.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

kprobes: Check probe address is reserved

Check whether the address of new probe is already reserved by
ftrace or alternatives (on x86) when registering new probe.
If reserved, it returns an error and not register the probe.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: przemyslaw@pawelczyk.it
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
Cc: Jason Baron <jbaron@redhat.com>
LKML-Reference: <20100202214918.4694.94179.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

ftrace/alternatives: Introducing *_text_reserved functions

Introducing *_text_reserved functions for checking the text
address range is partially reserved or not. This patch provides
checking routines for x86 smp alternatives and dynamic ftrace.
Since both functions modify fixed pieces of kernel text, they
should reserve and protect those from other dynamic text
modifier, like kprobes.

This will also be extended when introducing other subsystems
which modify fixed pieces of kernel text. Dynamic text modifiers
should avoid those.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: przemyslaw@pawelczyk.it
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
Cc: Jason Baron <jbaron@redhat.com>
LKML-Reference: <20100202214911.4694.16587.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

kprobes: Disable booster when CONFIG_PREEMPT=y

Disable kprobe booster when CONFIG_PREEMPT=y at this time,
because it can't ensure that all kernel threads preempted on
kprobe's boosted slot run out from the slot even using
freeze_processes().

The booster on preemptive kernel will be resumed if
synchronize_tasks() or something like that is introduced.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100202214904.4694.24330.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf annotate: Fix perf top module symbol annotation

Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1265265106.6364.5.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf top: Teach it to autolocate vmlinux

By relying on logic in dso__load_kernel_sym(), we can
automatically load vmlinux.

The only thing which needs to be adjusted, is how --sym-annotate
option is handled - now we can't rely on vmlinux been loaded
until full successful pass of dso__load_vmlinux(), but that's
not the case if we'll do sym_filter_entry setup in
symbol_filter().

So move this step right after event__process_sample() where we
know the whole dso__load_kernel_sym() pass is done.

By the way, though conceptually similar `perf top` still can't
annotate userspace - see next patches with fixes.

Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1265223128-11786-9-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf annotate: Fix it for non-prelinked *.so

The problem was we were incorrectly calculating objdump
addresses for sym->start and sym->end, look:

For simple ET_DYN type DSO (*.so) with one function, objdump -dS
output is something like this:

    000004ac <my_strlen>:
    int my_strlen(const char *s)
     4ac:   55                      push   %ebp
     4ad:   89 e5                   mov    %esp,%ebp
     4af:   83 ec 10                sub    $0x10,%esp
    {

i.e. we have relative-to-dso-mapping IPs (=RIP) there.

For ET_EXEC type and probably for prelinked libs as well (sorry
can't test - I don't use prelink) objdump outputs absolute IPs,
e.g.

    08048604 <zz_strlen>:
    extern "C"
    int zz_strlen(const char *s)
     8048604:       55                      push   %ebp
     8048605:       89 e5                   mov    %esp,%ebp
     8048607:       83 ec 10                sub    $0x10,%esp
    {

So, if sym->start is always relative to dso mapping(*), we'll
have to unmap it for ET_EXEC like cases, and leave as is for
ET_DYN cases.

(*) and it is - we've explicitely made it relative. Look for
    adjust_symbols handling in dso__load_sym()

Previously we were always unmapping sym->start and for ET_DYN
dsos resulting addresses were wrong, and so objdump output was
empty.

The end result was that perf annotate output for symbols from
non-prelinked *.so had always 0.00% percents only, which is
wrong.

To fix it, let's introduce a helper for converting rip to
objdump address, and also let's document what map_ip() and
unmap_ip() do -- I had to study sources for several hours to
understand it.

Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1265223128-11786-8-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf tools: Adjust some verbosity levels

Not to pollute too much 'perf annotate' debugging sessions.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-7-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf record: Stop intercepting events, use postprocessing to get build-ids

We want to stream events as fast as possible to perf.data, and
also in the future we want to have splice working, when no
interception will be possible.

Using build_id__mark_dso_hit_ops to create the list of DSOs that
back MMAPs we also optimize disk usage in the build-id cache by
only caching DSOs that had hits.

Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-6-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf build-id: Move the routine to find DSOs with hits to the lib

Because 'perf record' will have to find the build-ids in after
we stop recording, so as to reduce even more the impact in the
workload while we do the measurement.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-5-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf probe: Don't use a perf_session instance just to resolve symbols

With the recent modifications done to untie the session and
symbol layers, 'perf probe' now can use just the symbols layer.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf symbols: Ditch vdso global variable

We can check using strcmp, most DSOs don't start with '[' so the
test is cheap enough and we had to test it there anyway since
when reading perf.data files we weren't calling the routine that
created this global variable and thus weren't setting it as
"loaded", which was causing a bogus:

  Failed to open [vdso], continuing without symbols

Message as the first line of 'perf report'.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf symbols: Fixup vsyscall maps

While debugging a problem reported by Pekka Enberg by printing
the IP and all the maps for a thread when we don't find a map
for an IP I noticed that dso__load_sym needs to fixup these
extra maps it creates to hold symbols in different ELF sections
than the main kernel one.

Now we're back showing things like:

[root@doppio linux-2.6-tip]# perf report | grep vsyscall
     0.02%             mutt  [kernel.kallsyms].vsyscall_fn  [.] vread_hpet
     0.01%            named  [kernel.kallsyms].vsyscall_fn  [.] vread_hpet
     0.01%   NetworkManager  [kernel.kallsyms].vsyscall_fn  [.] vread_hpet
     0.01%         gconfd-2  [kernel.kallsyms].vsyscall_0   [.] vgettimeofday
     0.01%  hald-addon-rfki  [kernel.kallsyms].vsyscall_fn  [.] vread_hpet
     0.00%      dbus-daemon  [kernel.kallsyms].vsyscall_fn  [.] vread_hpet
[root@doppio linux-2.6-tip]#

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf symbols: Remove perf_session usage in symbols layer

I noticed while writing the first test in 'perf regtest' that to
just test the symbol handling routines one needs to create a
perf session, that is a layer centered on a perf.data file,
events, etc, so I untied these layers.

This reduces the complexity for the users as the number of
parameters to most of the symbols and session APIs now was
reduced while not adding more state to all the map instances by
only having data that is needed to split the kernel (kallsyms
and ELF symtab sections) maps and do vmlinux relocation on the
main kernel map.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf tools: Use O_LARGEFILE to open perf data file

Open perf data file with O_LARGEFILE flag since its size is
easily larger that 2G.

For example:

 # rm -rf perf.data
 # ./perf kmem record sleep 300

 [ perf record: Woken up 0 times to write data ]
 [ perf record: Captured and wrote 3142.147 MB perf.data
 (~137282513 samples) ]

 # ll -h perf.data
 -rw------- 1 root root 3.1G .....

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4B68F32A.9040203@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf lock: Clean up various details

Fix up a few small stylistic details:

 - use consistent vertical spacing/alignment
 - remove line80 artifacts
 - group some global variables better
 - remove dead code

Plus rename 'prof' to 'report' to make it more in line with other
tools, and remove the line/file keying as we really want to use
IPs like the other tools do.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1264851813-8413-12-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf lock: Introduce new tool "perf lock", for analyzing lock statistics

Adding new subcommand "perf lock" to perf.

I have a lot of remaining ToDos, but for now perf lock can
already provide minimal functionality for analyzing lock
statistics.

Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1264851813-8413-12-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf lock: Enhance information of lock trace events

Add wait time and lock identification details.

Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1264851813-8413-11-git-send-email-mitake@dcl.info.waseda.ac.jp>
[ removed the file/line bits as we can do that better via IPs ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf: Add util/include/linuxhash.h to include hash.h of kernel

linux/hash.h, hash header of kernel, is also useful for perf.

util/include/linuxhash.h includes linux/hash.h, so we can use
hash facilities (e.g. hash_long()) in perf now.

Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1264851813-8413-3-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf tools: Add __data_loc support

This patch is required to test the next patch for perf lock.

At 064739bc4b3d7f424b2f25547e6611bcf0132415 ,
support for the modifier "__data_loc" of format is added.

But, when I wanted to parse format of lock_acquired (or some
event else), raw_field_ptr() did not returned correct pointer.

So I modified raw_field_ptr() like this patch. Then
raw_field_ptr() works well.

Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
LKML-Reference: <1264851813-8413-2-git-send-email-mitake@dcl.info.waseda.ac.jp>
[ v3: fixed minor stylistic detail ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Revert "perf record: Intercept all events"

This reverts commit f5a2c3dce03621b55f84496f58adc2d1a87ca16f.

This patch is required for making "perf lock rec" work.
The commit f5a2c3dce0 changes write_event() of builtin-record.c
. And changed write_event() sometimes doesn't stop with perf
lock rec.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
[ that commit also causes perf record to not be Ctrl-C-able,
  and it's concetually wrong to parse the data at record time
  (unconditionally - even when not needed), as we eventually
  want to be able to do zero-copy recording, at least for
  non-archive recordings.  ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf: Ignore perf-archive temp file

Tell git to ignore perf-archive.

Signed-off-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1264633557-17597-6-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

tools/perf/perf.c: Clean up trivial style issues

Checked with:
./../scripts/checkpatch.pl --terse --file perf.c

 perf.c: 51: ERROR: open brace '{' following function declarations go on the next line
 perf.c: 73: ERROR: "foo*** bar" should be "foo ***bar"
 perf.c:112: ERROR: space prohibited before that close parenthesis ')'
 perf.c:127: ERROR: space prohibited before that close parenthesis ')'
 perf.c:171: ERROR: "foo** bar" should be "foo **bar"
 perf.c:213: ERROR: "(foo*)" should be "(foo *)"
 perf.c:216: ERROR: "(foo*)" should be "(foo *)"
 perf.c:217: ERROR: space required before that '*' (ctx:OxV)
 perf.c:452: ERROR: do not initialise statics to 0 or NULL
 perf.c:453: ERROR: do not initialise statics to 0 or NULL

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <1264633557-17597-7-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'perf/urgent' into perf/core

Merge reason: We want to queue up a dependent patch. Also update to
              later -rc's.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf session: Create kernel maps in the constructor

Removing one extra step needed in the tools that need this,
fixing a bug in 'perf probe' where this was not being done.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1264633557-17597-4-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf symbols: Split helpers used when creating kernel dso object

To make it clear and allow for direct usage by, for instance,
regression test suites.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1264633557-17597-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf symbols: Factor out dso__load_vmlinux_path()

So that we can call it directly from regression tests, and also
to reduce the size of dso__load_kernel_sym(), making it more
clear.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1264633557-17597-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf top: Exit if specified --vmlinux can't be used

As we do lazy loading of symtabs we only will know if the
specified vmlinux file is invalid when we actually have a hit in
kernel space and then try to load it. So if we get kernel hits
and there are _no_ symbols in the DSO backing the kernel map,
bail out.

Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1264633557-17597-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_events: Fix sample_period transfer on inherit

One problem with frequency driven counters is that we cannot
predict the rate at which they trigger, therefore we have to
start them at period=1, this causes a ramp up effect. However,
if we fail to propagate the stable state on fork each new child
will have to ramp up again. This can lead to significant
artifacts in sample data.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: eranian@google.com
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1264752266.4283.2121.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_events, x86: Remove spurious counter reset from x86_pmu_enable()

At enable time the counter might still have a ->idx pointing to
a previously occupied location that might now be taken by
another event. Resetting the counter at that location with data
from this event will destroy the other counter's count.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <20100127221122.261477183@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_events, x86: Implement Intel Westmere support

The new Intel documentation includes Westmere arch specific
event maps that are significantly different from the Nehalem
ones. Add support for this generation.

Found the CPUID model numbers on wikipedia.

Also ammend some Nehalem constraints, spotted those when looking
for the differences between Nehalem and Westmere.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <20100127221122.151865645@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_events, x86: Clean up hw_perf_*_all() implementation

Put the recursion avoidance code in the generic hook instead of
replicating it in each implementation.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <20100127221122.057507285@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_events, x86: Fix event constraint masks

Since constraints are specified on the event number, not number
and unit mask shorten the constraint masks so that we'll
actually match something.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <20100127221121.967610372@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_event: x86: Deduplicate the disable code

Share the meat of the x86_pmu_disable() code with hw_perf_enable().

Also remove the barrier() from that code, since I could not convince
myself we actually need it.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf, x86: Clean up event constraints code a bit

- Remove stray debug code
 - Improve ugly macros a bit
 - Remove some whitespace damage
 - (Also fix up some accumulated damage in perf_event.h)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>

perf_event: x86: Optimize x86_pmu_disable()

x86_pmu_disable() removes the event from the cpuc->event_list[], however
since an event can only be on that list once, stop looking after we found
it.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_event: x86: Optimize the fast path a little more

Remove num from the fast path and save a few ops.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <20100122155536.056430539@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_event: x86: Optimize constraint weight computation

Add a weight member to the constraint structure and avoid recomputing the
weight at runtime.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <20100122155535.963944926@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_event: x86: Optimize the constraint searching bits

Instead of copying bitmasks around, pass pointers to the constraint
structure.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <20100122155535.887853503@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

bitops: Provide compile time HWEIGHT{8,16,32,64}

Provide compile time versions of hweight.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <20100122155535.797688466@chello.nl>
[ Remove some whitespace damage while we are at it ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_event: x86: Reduce some overly long lines with some MACROs

Introduce INTEL_EVENT_CONSTRAINT and FIXED_EVENT_CONSTRAINT to reduce
some line length and typing work.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <20100122155535.688730371@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_event: x86: Clean up some of the u64/long bitmask casting

We need this to be u64 for direct assigment, but the bitmask functions
all work on unsigned long, leading to cast heaven, solve this by using a
union.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <20100122155535.595961269@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_event: x86: Fixup constraints typing issue

Constraints gets defined an u64 but in long quantities and then cast to
long.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <20100122155535.504916780@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_event: x86: Allocate the fake_cpuc

GCC was complaining the stack usage was too large, so allocate the
structure.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <20100122155535.411197266@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_events: Add fast-path to the rescheduling code

Implement correct fastpath scheduling, i.e., reuse previous assignment.

Signed-off-by: Stephane Eranian <eranian@google.com>
[ split from larger patch]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4b588464.1818d00a.4456.383b@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_events, x86: Improve x86 event scheduling

This patch improves event scheduling by maximizing the use of PMU
registers regardless of the order in which events are created in a group.

The algorithm takes into account the list of counter constraints for each
event. It assigns events to counters from the most constrained, i.e.,
works on only one counter, to the least constrained, i.e., works on any
counter.

Intel Fixed counter events and the BTS special event are also handled via
this algorithm which is designed to be fairly generic.

The patch also updates the validation of an event to use the scheduling
algorithm. This will cause early failure in perf_event_open().

The 2nd version of this patch follows the model used by PPC, by running
the scheduling algorithm and the actual assignment separately. Actual
assignment takes place in hw_perf_enable() whereas scheduling is
implemented in hw_perf_group_sched_in() and x86_pmu_enable().

Signed-off-by: Stephane Eranian <eranian@google.com>
[ fixup whitespace and style nits as well as adding is_x86_event() ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4b5430c6.0f975e0a.1bf9.ffff85fe@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86/hw-breakpoints: Optimize return code from notifier chain in hw_breakpoint_handler

Processing of debug exceptions in do_debug() can stop if it
originated from a hw-breakpoint exception by returning NOTIFY_STOP
in most cases.

But for certain cases such as:

a) user-space breakpoints with pending SIGTRAP signal delivery (as
in the case of ptrace induced breakpoints).

b) exceptions due to other causes than breakpoints

We will continue to process the exception by returning NOTIFY_DONE.

Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland McGrath <roland@redhat.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
LKML-Reference: <20100128111415.GC13935@in.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

x86/debug: Clear reserved bits of DR6 in do_debug()

Clear the reserved bits from the stored copy of debug status
register (DR6).
This will help easy bitwise operations such as quick testing
of a debug event origin.

Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20100128111401.GB13935@in.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

tracing/kprobe: Cleanup unused return value of tracing functions

The return values of the kprobe's tracing functions are meaningless,
lets remove these.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4B60E9A3.2040505@cn.fujitsu.com>
[fweisbec@gmail: whitespace fixes, drop useless void returns in end
of functions]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

perf: Factorize trace events raw sample buffer operations

Introduce ftrace_perf_buf_prepare() and ftrace_perf_buf_submit() to
gather the common code that operates on raw events sampling buffer.
This cleans up redundant code between regular trace events, syscall
events and kprobe events.

Changelog v1->v2:
- Rename function name as per Masami and Frederic's suggestion
- Add __kprobes for ftrace_perf_buf_prepare() and make
  ftrace_perf_buf_submit() inline as per Masami's suggestion
- Export ftrace_perf_buf_prepare since modules will use it

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4B60E92D.9000808@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

perf: Fix inconsistency between IP and callchain sampling

When running perf across all cpus with backtracing (-a -g), sometimes we
get samples without associated backtraces:

    23.44%         init  [kernel]                     [k] restore
    11.46%         init                       eeba0c  [k] 0x00000000eeba0c
     6.77%      swapper  [kernel]                     [k] .perf_ctx_adjust_freq
     5.73%         init  [kernel]                     [k] .__trace_hcall_entry
     4.69%         perf  libc-2.9.so                  [.] 0x0000000006bb8c
                       |
                       |--11.11%-- 0xfffa941bbbc

It turns out the backtrace code has a check for the idle task and the IP
sampling does not. This creates problems when profiling an interrupt
heavy workload (in my case 10Gbit ethernet) since we get no backtraces
for interrupts received while idle (ie most of the workload).

Right now x86 and sh check that current is not NULL, which should never
happen so remove that too.

Idle task's exclusion must be performed from the core code, on top
of perf_event_attr:exclude_idle.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
LKML-Reference: <20100118054707.GT12666@kryten>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

hw_breakpoints: Release the bp slot if arch_validate_hwbkpt_settings() fails.

On a given architecture, when hardware breakpoint registration fails
due to un-supported access type (read/write/execute), we lose the bp
slot since register_perf_hw_breakpoint() does not release the bp slot
on failure.
Hence, any subsequent hardware breakpoint registration starts failing
with 'no space left on device' error.

This patch introduces error handling in register_perf_hw_breakpoint()
function and releases bp slot on error.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: K. Prasad <prasad@linux.vnet.ibm.com>
Cc: Maneesh Soni <maneesh@in.ibm.com>
LKML-Reference: <20100121125516.GA32521@in.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

perf trace: Add -i option for choosing input file

perf trace lacks -i option for choosing input file.
This patch adds it to perf trace.

Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1264167929-6741-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf symbols: Use the right variable to check for kallsyms in the cache

Probably this wasn't noticed when testing this on my parisc
machine because I must have copied manually to its cache the
vmlinux file used in the x86_64 machine, now that I tried
looking on a x86-32 machine with a fresh cache, kernel symbols
weren't being resolved even with the right kallsyms copy on its
cache, duh.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1264178102-4203-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf symbols: Fix inverted logic for showing kallsyms as the source of symbols

Only if we parsed /proc/kallsyms (or a copy found in the buildid
cache) we should set the dso long name to "[kernel.kallsyms]".

Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1264178102-4203-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf top: Handle PERF_RECORD_{FORK,EXIT} events

As noticed by Mike, symbols in new tasks were not being
processed as we weren't processing these events.

Reported-by: Mike Galbraith <efault@gmx.de>
Tested-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1264086284-1431-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf top: Fix sample counting

Broken since "5b2bb75 perf top: Support userspace symbols too".

Reported-by: Mike Galbraith <efault@gmx.de>
Tested-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1264086284-1431-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf: Ignore perf.data.old

Tell git to ignore this file.

Signed-off-by: WANG Cong <amwang@redhat.com>
LKML-Reference: <20100125051052.3999.28082.sendpatchset@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf report: Fix segmentation fault when running with '-g none'

Segmentation fault occurs when running perf report with '-g
none'.

Reported-by: Austin Zhang <austin.zhang@intel.com>
Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100122014750.GA4111@ywang-moblin2.bj.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf: Reimplement frequency driven sampling

There was a bug in the old period code that caused intel_pmu_enable_all()
or native_write_msr_safe() to show up quite high in the profiles.

In staring at that code it made my head hurt, so I rewrote it in a
hopefully simpler fashion. Its now fully symetric between tick and
overflow driven adjustments and uses less data to boot.

The only complication is that it basically wants to do a u128 division.
The code approximates that in a rather simple truncate until it fits
fashion, taking care to balance the terms while truncating.

This version does not generate that sampling artefact.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

fnctl: f_modown should call write_lock_irqsave/restore

Commit 703625118069f9f8960d356676662d3db5a9d116 exposed that f_modown()
should call write_lock_irqsave instead of just write_lock_irq so that
because a caller could have a spinlock held and it would not be good to
renable interrupts.

Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Tavis Ormandy <taviso@google.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for_linus' of git://git./linux/kernel/git/tytso/ext4

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: Drop EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE flag
  ext4: Fix quota accounting error with fallocate
  ext4: Handle -EDQUOT error on write

Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] sbc_fitpc2_wdt: fix I/O space access technique.
  [WATCHDOG] ixp2000: Fix build failure caused by missing include

Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ASoC: fix a memory-leak in wm8903
  ALSA: hda - add possibility to choose speakers configuration for 4930g
  ALSA: hda - Fix HP T5735 automute
  ALSA: hda - Turn on EAPD only if available for Realtek codecs
  ALSA: hda - Fix parsing pin node 0x21 on ALC259

Merge branch 'kvm-updates/2.6.33' of git://git./virt/kvm/kvm

* 'kvm-updates/2.6.33' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Fix leak of free lapic date in kvm_arch_vcpu_init()
  KVM: x86: Fix probable memory leak of vcpu->arch.mce_banks
  KVM: S390: fix potential array overrun in intercept handling
  KVM: fix spurious interrupt with irqfd
  eventfd - allow atomic read and waitqueue remove
  KVM: MMU: bail out pagewalk on kvm_read_guest error
  KVM: properly check max PIC pin in irq route setup
  KVM: only allow one gsi per fd
  KVM: x86: Fix host_mapping_level()
  KVM: powerpc: Show timing option only on embedded
  KVM: Fix race between APIC TMR and IRR

Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6

* 'linux-next' of git://git.infradead.org/ubi-2.6:
  UBI: fix memory leak in update path
  UBI: add more checks to chdev open
  UBI: initialise update marker