Archie Pusaka [Fri, 4 Jun 2021 08:26:27 +0000 (16:26 +0800)]
Bluetooth: use inclusive language when filtering devices
This patch replaces some non-inclusive terms based on the appropriate
language mapping table compiled by the Bluetooth SIG:
https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf
Specifically, these terms are replaced:
blacklist -> reject list
whitelist -> accept list
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Archie Pusaka [Fri, 4 Jun 2021 08:26:26 +0000 (16:26 +0800)]
Bluetooth: use inclusive language when tracking connections
This patch replaces some non-inclusive terms based on the appropriate
language mapping table compiled by the Bluetooth SIG:
https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf
Specifically, these terms are replaced:
master -> central
slave -> peripheral
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Archie Pusaka [Fri, 4 Jun 2021 08:26:25 +0000 (16:26 +0800)]
Bluetooth: use inclusive language in HCI role comments
This patch replaces some non-inclusive terms based on the appropriate
language mapping table compiled by the Bluetooth SIG:
https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf
Specifically, these terms are replaced:
master -> initiator (for smp) or central (everything else)
slave -> responder (for smp) or peripheral (everything else)
The #define preprocessor terms are unchanged for now to not disturb
dependent APIs.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Kai Ye [Thu, 3 Jun 2021 07:41:05 +0000 (15:41 +0800)]
Bluetooth: smp: Use the correct print format
According to Documentation/core-api/printk-formats.rst,
Use the correct print format. Printing an unsigned int value should use %u
instead of %d. Otherwise printk() might end up displaying negative numbers.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Kai Ye [Thu, 3 Jun 2021 07:41:04 +0000 (15:41 +0800)]
Bluetooth: sco: Use the correct print format
According to Documentation/core-api/printk-formats.rst,
Use the correct print format. Printing an unsigned int value should use %u
instead of %d. Otherwise printk() might end up displaying negative numbers.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Kai Ye [Thu, 3 Jun 2021 07:41:03 +0000 (15:41 +0800)]
Bluetooth: msft: Use the correct print format
According to Documentation/core-api/printk-formats.rst,
Use the correct print format. Printing an unsigned int value should use %u
instead of %d. Otherwise printk() might end up displaying negative numbers.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Kai Ye [Thu, 3 Jun 2021 07:41:02 +0000 (15:41 +0800)]
Bluetooth: mgmt: Use the correct print format
According to Documentation/core-api/printk-formats.rst,
Use the correct print format. Printing an unsigned int value should use %u
instead of %d. Otherwise printk() might end up displaying negative numbers.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Kai Ye [Thu, 3 Jun 2021 07:41:00 +0000 (15:41 +0800)]
Bluetooth: amp: Use the correct print format
According to Documentation/core-api/printk-formats.rst,
Use the correct print format. Printing an unsigned int value should use %u
instead of %d. Otherwise printk() might end up displaying negative numbers.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Kai Ye [Thu, 3 Jun 2021 07:40:59 +0000 (15:40 +0800)]
Bluetooth: a2mp: Use the correct print format
According to Documentation/core-api/printk-formats.rst,
Use the correct print format. Printing an unsigned int value should use %u
instead of %d. Otherwise printk() might end up displaying negative numbers.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Kai Ye [Thu, 3 Jun 2021 07:40:58 +0000 (15:40 +0800)]
Bluetooth: 6lowpan: Use the correct print format
According to Documentation/core-api/printk-formats.rst,
Use the correct print format. Printing an unsigned int value should use %u
instead of %d. Otherwise printk() might end up displaying negative numbers.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Kai Ye [Thu, 3 Jun 2021 07:40:56 +0000 (15:40 +0800)]
Bluetooth: hidp: Use the correct print format
According to Documentation/core-api/printk-formats.rst,
Use the correct print format. Printing an unsigned int value should use %u
instead of %d. Otherwise printk() might end up displaying negative numbers.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Kai Ye [Thu, 3 Jun 2021 07:40:55 +0000 (15:40 +0800)]
Bluetooth: cmtp: Use the correct print format
According to Documentation/core-api/printk-formats.rst,
Use the correct print format. Printing an unsigned int value should use %u
instead of %d. Otherwise printk() might end up displaying negative numbers.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Kai Ye [Thu, 3 Jun 2021 07:40:54 +0000 (15:40 +0800)]
Bluetooth: bnep: Use the correct print format
According to Documentation/core-api/printk-formats.rst,
Use the correct print format. Printing an unsigned int value should use %u
instead of %d. Otherwise printk() might end up displaying negative numbers.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Tim Jiang [Tue, 1 Jun 2021 09:57:10 +0000 (17:57 +0800)]
Bluetooth: btusb: fix bt fiwmare downloading failure issue for qca btsoc.
This is btsoc timing issue, after host start to downloading bt firmware,
ep2 need time to switch from function acl to function dfu, so host add
20ms delay as workaround.
Signed-off-by: Tim Jiang <tjiang@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Tim Jiang [Tue, 1 Jun 2021 09:57:25 +0000 (17:57 +0800)]
Bluetooth: btusb: use default nvm if boardID is 0 for wcn6855.
if boardID is 0, will use the default nvm file without surfix.
Signed-off-by: Tim Jiang <tjiang@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Zhang Qilong [Mon, 31 May 2021 14:24:49 +0000 (22:24 +0800)]
Bluetooth: btmtkuart: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
Using pm_runtime_resume_and_get is more appropriate
for simplifing code
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Archie Pusaka [Mon, 31 May 2021 08:37:28 +0000 (16:37 +0800)]
Bluetooth: use inclusive language in comments
This patch replaces some non-inclusive terms based on the appropriate
language mapping table compiled by the Bluetooth SIG:
https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf
Specifically, these terms are replaced:
slave -> peripheral
blacklisted -> blocked
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Archie Pusaka [Mon, 31 May 2021 08:37:25 +0000 (16:37 +0800)]
Bluetooth: use inclusive language in SMP
This patch replaces some non-inclusive terms based on the appropriate
language mapping table compiled by the Bluetooth SIG:
https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf
Specifically, these terms are replaced:
master -> initiator
slave -> responder
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Archie Pusaka [Mon, 31 May 2021 08:37:23 +0000 (16:37 +0800)]
Bluetooth: use inclusive language in HCI LE features
This patch replaces some non-inclusive terms based on the appropriate
language mapping table compiled by the Bluetooth SIG:
https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf
Specifically, these terms are replaced:
master -> central
slave -> peripheral
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Archie Pusaka [Mon, 31 May 2021 08:37:22 +0000 (16:37 +0800)]
Bluetooth: use inclusive language to describe CPB
This patch replaces some non-inclusive terms based on the appropriate
language mapping table compiled by the Bluetooth SIG:
https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf
Specifically, these terms are replaced when describing the
connectionless peripheral broadcast feature:
master -> central
slave -> peripheral
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Archie Pusaka [Mon, 31 May 2021 08:37:21 +0000 (16:37 +0800)]
Bluetooth: use inclusive language in hci_core.h
This patch replaces some non-inclusive terms based on the appropriate
language mapping table compiled by the Bluetooth SIG:
https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf
Specifically, these terms are replaced:
master -> central
slave -> peripheral
These attributes are not used elsewhere in the code.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Luiz Augusto von Dentz [Fri, 28 May 2021 18:45:02 +0000 (11:45 -0700)]
Bluetooth: mgmt: Fix slab-out-of-bounds in tlv_data_is_valid
This fixes parsing of LTV entries when the length is 0.
Found with:
tools/mgmt-tester -s "Add Advertising - Success (ScRsp only)"
Add Advertising - Success (ScRsp only) - run
Sending Add Advertising (0x003e)
Test condition added, total 1
[ 11.004577] ==================================================================
[ 11.005292] BUG: KASAN: slab-out-of-bounds in tlv_data_is_valid+0x87/0xe0
[ 11.005984] Read of size 1 at addr
ffff888002c695b0 by task mgmt-tester/87
[ 11.006711]
[ 11.007176]
[ 11.007429] Allocated by task 87:
[ 11.008151]
[ 11.008438] The buggy address belongs to the object at
ffff888002c69580
[ 11.008438] which belongs to the cache kmalloc-64 of size 64
[ 11.010526] The buggy address is located 48 bytes inside of
[ 11.010526] 64-byte region [
ffff888002c69580,
ffff888002c695c0)
[ 11.012423] The buggy address belongs to the page:
[ 11.013291]
[ 11.013544] Memory state around the buggy address:
[ 11.014359]
ffff888002c69480: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 11.015453]
ffff888002c69500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 11.016232] >
ffff888002c69580: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
[ 11.017010] ^
[ 11.017547]
ffff888002c69600: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
[ 11.018296]
ffff888002c69680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 11.019116] ==================================================================
Fixes:
2bb36870e8cb2 ("Bluetooth: Unify advertising instance flags check")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Joakim Tjernlund [Fri, 28 May 2021 15:26:44 +0000 (17:26 +0200)]
Bluetooth: btrtl: rename USB fw for RTL8761
According Realteks own BT drivers firmware RTL8761B is for UART
and RTL8761BU is for USB.
Change existing 8761B to UART and add an 8761BU entry for USB
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Joakim Tjernlund [Fri, 28 May 2021 15:26:45 +0000 (17:26 +0200)]
Bluetooth: btusb: Add 0x0b05:0x190e Realtek 8761BU (ASUS BT500) device.
T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=04 Dev#= 18 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0b05 ProdID=190e Rev= 2.00
S: Manufacturer=Realtek
S: Product=ASUS USB-BT500
S: SerialNumber=xxxxxxxx
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Archie Pusaka [Thu, 27 May 2021 07:19:54 +0000 (15:19 +0800)]
Bluetooth: hci_h5: Add RTL8822CS capabilities
RTL8822 chipset supports WBS, and this information is conveyed in
btusb.c. However, the UART driver doesn't have this information just
yet.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Tedd Ho-Jeong An [Wed, 26 May 2021 17:36:22 +0000 (10:36 -0700)]
Bluetooth: mgmt: Fix the command returns garbage parameter value
When the Get Device Flags command fails, it returns the error status
with the parameters filled with the garbage values. Although the
parameters are not used, it is better to fill with zero than the random
values.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Yun-Hao Chung [Thu, 20 May 2021 05:12:09 +0000 (13:12 +0800)]
Bluetooth: disable filter dup when scan for adv monitor
Disable duplicates filter when scanning for advertisement monitor for
the following reasons. The scanning includes active scan and passive
scan.
For HW pattern filtering (ex. MSFT), Realtek and Qualcomm controllers
ignore RSSI_Sampling_Period when the duplicates filter is enabled.
For SW pattern filtering, when we're not doing interleaved scanning, it
is necessary to disable duplicates filter, otherwise hosts can only
receive one advertisement and it's impossible to know if a peer is still
in range.
Signed-off-by: Yun-Hao Chung <howardchung@chromium.org>
Reviewed-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Manish Mandlik <mmandlik@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Sathish Narasimman [Thu, 20 May 2021 11:42:01 +0000 (17:12 +0530)]
Bluetooth: Translate additional address type during le_conn_comp
When using controller based address resolution, then the destination
address type during le_conn_complete uses 0x02 & 0x03 if controller
resolves the destination address(RPA).
These address types need to be converted back into either 0x00 0r 0x01
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
YueHaibing [Thu, 20 May 2021 13:32:35 +0000 (21:32 +0800)]
Bluetooth: RFCOMM: Use DEVICE_ATTR_RO macro
Use DEVICE_ATTR_RO helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Hilda Wu [Fri, 14 May 2021 03:19:01 +0000 (11:19 +0800)]
Bluetooth: btusb: Add support USB ALT 3 for WBS
Because mSBC frames do not need to be aligned to the SCO packet
boundary. Using USB ALT 3 let HCI payload >= 60 bytes, let mSBC
data satisfy 60 Bytes avoid payload unaligned situation and fixed
some headset no voise issue.
USB Alt 3 supported also need HFP support transparent MTU in 72 Bytes.
Signed-off-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Luiz Augusto von Dentz [Wed, 19 May 2021 20:41:51 +0000 (13:41 -0700)]
Bluetooth: L2CAP: Fix invalid access on ECRED Connection response
The use of l2cap_chan_del is not safe under a loop using
list_for_each_entry.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Luiz Augusto von Dentz [Wed, 19 May 2021 20:41:50 +0000 (13:41 -0700)]
Bluetooth: L2CAP: Fix invalid access if ECRED Reconfigure fails
The use of l2cap_chan_del is not safe under a loop using
list_for_each_entry.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Szymon Janc [Tue, 18 May 2021 14:54:36 +0000 (16:54 +0200)]
Bluetooth: Remove spurious error message
Even with rate limited reporting this is very spammy and since
it is remote device that is providing bogus data there is no
need to report this as error.
Since real_len variable was used only to allow conditional error
message it is now also removed.
[72454.143336] bt_err_ratelimited: 10 callbacks suppressed
[72454.143337] Bluetooth: hci0: advertising data len corrected
[72454.296314] Bluetooth: hci0: advertising data len corrected
[72454.892329] Bluetooth: hci0: advertising data len corrected
[72455.051319] Bluetooth: hci0: advertising data len corrected
[72455.357326] Bluetooth: hci0: advertising data len corrected
[72455.663295] Bluetooth: hci0: advertising data len corrected
[72455.787278] Bluetooth: hci0: advertising data len corrected
[72455.942278] Bluetooth: hci0: advertising data len corrected
[72456.094276] Bluetooth: hci0: advertising data len corrected
[72456.249137] Bluetooth: hci0: advertising data len corrected
[72459.416333] bt_err_ratelimited: 13 callbacks suppressed
[72459.416334] Bluetooth: hci0: advertising data len corrected
[72459.721334] Bluetooth: hci0: advertising data len corrected
[72460.011317] Bluetooth: hci0: advertising data len corrected
[72460.327171] Bluetooth: hci0: advertising data len corrected
[72460.638294] Bluetooth: hci0: advertising data len corrected
[72460.946350] Bluetooth: hci0: advertising data len corrected
[72461.225320] Bluetooth: hci0: advertising data len corrected
[72461.690322] Bluetooth: hci0: advertising data len corrected
[72462.118318] Bluetooth: hci0: advertising data len corrected
[72462.427319] Bluetooth: hci0: advertising data len corrected
[72464.546319] bt_err_ratelimited: 7 callbacks suppressed
[72464.546319] Bluetooth: hci0: advertising data len corrected
[72464.857318] Bluetooth: hci0: advertising data len corrected
[72465.163332] Bluetooth: hci0: advertising data len corrected
[72465.278331] Bluetooth: hci0: advertising data len corrected
[72465.432323] Bluetooth: hci0: advertising data len corrected
[72465.891334] Bluetooth: hci0: advertising data len corrected
[72466.045334] Bluetooth: hci0: advertising data len corrected
[72466.197321] Bluetooth: hci0: advertising data len corrected
[72466.340318] Bluetooth: hci0: advertising data len corrected
[72466.498335] Bluetooth: hci0: advertising data len corrected
[72469.803299] bt_err_ratelimited: 10 callbacks suppressed
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=203753
Cc: stable@vger.kernel.org
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Daniel Lenski [Tue, 18 May 2021 17:25:46 +0000 (10:25 -0700)]
Bluetooth: btusb: Add a new QCA_ROME device (0cf3:e500)
This patch adds the 0cf3:e500 Bluetooth device (from a QCA9377 board) as a
QCA_ROME device. It appears to be functionally identical to another device
ID, also from a QCA9377 board, which was previously marked as QCA_ROME in
0a03f98b98c201191e3ba15a0e33f46d8660e1fd
("Bluetooth: Add a new 04ca:3015 QCA_ROME device").
Without this patch, the WiFi side of the QCA9377 board is slow or unusable
when the Bluetooth side is in use.
See https://askubuntu.com/a/1137852 for another report of QCA_ROME fixing
this issue for this device ID.
/sys/kernel/debug/usb/devices:
T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0cf3 ProdID=e500 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Daniel Lenski <dlenski@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Venkata Lakshmi Narayana Gubba [Tue, 18 May 2021 16:34:46 +0000 (22:04 +0530)]
dt-bindings: net: bluetooth: Add device tree bindings for QTI chip wcn6750
This patch enables regulators and gpios for the Qualcomm Bluetooth wcn6750
controller.
Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Venkata Lakshmi Narayana Gubba [Tue, 18 May 2021 16:34:45 +0000 (22:04 +0530)]
dt-bindings: net: bluetooth: Convert Qualcomm BT binding to DT schema
Converted Qualcomm Bluetooth binidings to DT schema.
Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Venkata Lakshmi Narayana Gubba [Tue, 18 May 2021 16:34:44 +0000 (22:04 +0530)]
Bluetooth: btqca: Moved extracting rom version info to common place
Moved extracting rom version info to common place as this code is
common in all if else ladder in qca_uart_setup.
Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Venkata Lakshmi Narayana Gubba [Tue, 18 May 2021 16:34:43 +0000 (22:04 +0530)]
Bluetooth: btqca: Add support for firmware image with mbn type for WCN6750
1. Added support to download firmware image with mbn type for wcn6750
as it supports mbn type image.
2. If mbn type image is not present then check for tlv type image.
3. Added debug logs for mbn type image.
Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Venkata Lakshmi Narayana Gubba [Tue, 18 May 2021 16:34:42 +0000 (22:04 +0530)]
Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6750
Added regulators,GPIOs and changes required to power on/off wcn6750.
Added support for firmware download for wcn6750.
Changes done in detail:
1. Added regulators and corresponding current values.
2. Added sw_ctrl GPIO pin which is output from BT SoC and indicates
status of clock supply to BT SoC.
3. Added inline function to check if the SoC type is wcn6750.
4. Modified the function qca_wcn3990_init() to support wcn6750 and
renamed it to qca_regulator_init().
Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Kai-Heng Feng [Fri, 14 May 2021 07:14:52 +0000 (15:14 +0800)]
Bluetooth: Shutdown controller after workqueues are flushed or cancelled
Rfkill block and unblock Intel USB Bluetooth [8087:0026] may make it
stops working:
[ 509.691509] Bluetooth: hci0: HCI reset during shutdown failed
[ 514.897584] Bluetooth: hci0: MSFT filter_enable is already on
[ 530.044751] usb 3-10: reset full-speed USB device number 5 using xhci_hcd
[ 545.660350] usb 3-10: device descriptor read/64, error -110
[ 561.283530] usb 3-10: device descriptor read/64, error -110
[ 561.519682] usb 3-10: reset full-speed USB device number 5 using xhci_hcd
[ 566.686650] Bluetooth: hci0: unexpected event for opcode 0x0500
[ 568.752452] Bluetooth: hci0: urb
0000000096cd309b failed to resubmit (113)
[ 578.797955] Bluetooth: hci0: Failed to read MSFT supported features (-110)
[ 586.286565] Bluetooth: hci0: urb
00000000c522f633 failed to resubmit (113)
[ 596.215302] Bluetooth: hci0: Failed to read MSFT supported features (-110)
Or kernel panics because other workqueues already freed skb:
[ 2048.663763] BUG: kernel NULL pointer dereference, address:
0000000000000000
[ 2048.663775] #PF: supervisor read access in kernel mode
[ 2048.663779] #PF: error_code(0x0000) - not-present page
[ 2048.663782] PGD 0 P4D 0
[ 2048.663787] Oops: 0000 [#1] SMP NOPTI
[ 2048.663793] CPU: 3 PID: 4491 Comm: rfkill Tainted: G W 5.13.0-rc1-next-
20210510+ #20
[ 2048.663799] Hardware name: HP HP EliteBook 850 G8 Notebook PC/8846, BIOS T76 Ver. 01.01.04 12/02/2020
[ 2048.663801] RIP: 0010:__skb_ext_put+0x6/0x50
[ 2048.663814] Code: 8b 1b 48 85 db 75 db 5b 41 5c 5d c3 be 01 00 00 00 e8 de 13 c0 ff eb e7 be 02 00 00 00 e8 d2 13 c0 ff eb db 0f 1f 44 00 00 55 <8b> 07 48 89 e5 83 f8 01 74 14 b8 ff ff ff ff f0 0f c1
07 83 f8 01
[ 2048.663819] RSP: 0018:
ffffc1d105b6fd80 EFLAGS:
00010286
[ 2048.663824] RAX:
0000000000000000 RBX:
ffff9d9ac5649000 RCX:
0000000000000000
[ 2048.663827] RDX:
ffffffffc0d1daf6 RSI:
0000000000000206 RDI:
0000000000000000
[ 2048.663830] RBP:
ffffc1d105b6fd98 R08:
0000000000000001 R09:
ffff9d9ace8ceac0
[ 2048.663834] R10:
ffff9d9ace8ceac0 R11:
0000000000000001 R12:
ffff9d9ac5649000
[ 2048.663838] R13:
0000000000000000 R14:
00007ffe0354d650 R15:
0000000000000000
[ 2048.663843] FS:
00007fe02ab19740(0000) GS:
ffff9d9e5f8c0000(0000) knlGS:
0000000000000000
[ 2048.663849] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 2048.663853] CR2:
0000000000000000 CR3:
0000000111a52004 CR4:
0000000000770ee0
[ 2048.663856] PKRU:
55555554
[ 2048.663859] Call Trace:
[ 2048.663865] ? skb_release_head_state+0x5e/0x80
[ 2048.663873] kfree_skb+0x2f/0xb0
[ 2048.663881] btusb_shutdown_intel_new+0x36/0x60 [btusb]
[ 2048.663905] hci_dev_do_close+0x48c/0x5e0 [bluetooth]
[ 2048.663954] ? __cond_resched+0x1a/0x50
[ 2048.663962] hci_rfkill_set_block+0x56/0xa0 [bluetooth]
[ 2048.664007] rfkill_set_block+0x98/0x170
[ 2048.664016] rfkill_fop_write+0x136/0x1e0
[ 2048.664022] vfs_write+0xc7/0x260
[ 2048.664030] ksys_write+0xb1/0xe0
[ 2048.664035] ? exit_to_user_mode_prepare+0x37/0x1c0
[ 2048.664042] __x64_sys_write+0x1a/0x20
[ 2048.664048] do_syscall_64+0x40/0xb0
[ 2048.664055] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 2048.664060] RIP: 0033:0x7fe02ac23c27
[ 2048.664066] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
[ 2048.664070] RSP: 002b:
00007ffe0354d638 EFLAGS:
00000246 ORIG_RAX:
0000000000000001
[ 2048.664075] RAX:
ffffffffffffffda RBX:
0000000000000001 RCX:
00007fe02ac23c27
[ 2048.664078] RDX:
0000000000000008 RSI:
00007ffe0354d650 RDI:
0000000000000003
[ 2048.664081] RBP:
0000000000000000 R08:
0000559b05998440 R09:
0000559b05998440
[ 2048.664084] R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000000003
[ 2048.664086] R13:
0000000000000000 R14:
ffffffff00000000 R15:
00000000ffffffff
So move the shutdown callback to a place where workqueues are either
flushed or cancelled to resolve the issue.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Mikhail Rudenko [Sun, 9 May 2021 23:28:37 +0000 (02:28 +0300)]
Bluetooth: btbcm: Add entry for BCM43430B0 UART Bluetooth
This patch adds the device ID for the BCM43430B0 module, found e.g. in
certain revisions of AMPAK AP6212 chip. The required firmware file is
named 'BCM43430B0.hcd'.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Connor Abbott [Fri, 7 May 2021 12:27:33 +0000 (14:27 +0200)]
Bluetooth: btqca: Don't modify firmware contents in-place
struct firmware::data is marked const, and when the firmware is
compressed with xz (default at least with Fedora) it's mapped read-only
which results in a crash:
BUG: unable to handle page fault for address:
ffffae57c0ca5047
PGD
100000067 P4D
100000067 PUD
1001ce067 PMD
10165a067 PTE
8000000112bba161
Oops: 0003 [#1] SMP NOPTI
CPU: 3 PID: 204 Comm: kworker/u17:0 Not tainted 5.12.1-test+ #1
Hardware name: Dell Inc. XPS 13 9310/0F7M4C, BIOS 1.2.5 12/10/2020
Workqueue: hci0 hci_power_on [bluetooth]
RIP: 0010:qca_download_firmware+0x27c/0x4e0 [btqca]
Code: 1b 75 04 80 48 0c 01 0f b7 c6 8d 54 02 0c 41 39 d7 0f 8e 62 fe ff ff 48 63 c2 4c 01 e8 0f b7 38 0f b7 70 02 66 83 ff 11 75 d3 <80> 48 0c 80 41 83 fc 03 7e 6e 88 58 0d eb ce 41 0f b6 45 0e 48 8b
RSP: 0018:
ffffae57c08dfc68 EFLAGS:
00010246
RAX:
ffffae57c0ca503b RBX:
000000000000000e RCX:
0000000000000000
RDX:
0000000000000037 RSI:
0000000000000006 RDI:
0000000000000011
RBP:
ffff978d9949e000 R08:
ffff978d84ed7540 R09:
ffffae57c0ca5000
R10:
000000000010cd00 R11:
0000000000000001 R12:
0000000000000005
R13:
ffffae57c0ca5004 R14:
ffff978d98ca8680 R15:
00000000000016a9
FS:
0000000000000000(0000) GS:
ffff9794ef6c0000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffffae57c0ca5047 CR3:
0000000113d5a004 CR4:
0000000000770ee0
PKRU:
55555554
Call Trace:
qca_uart_setup+0x2cb/0x1390 [btqca]
? qca_read_soc_version+0x136/0x220 [btqca]
qca_setup+0x288/0xab0 [hci_uart]
hci_dev_do_open+0x1f3/0x780 [bluetooth]
? try_to_wake_up+0x1c1/0x4f0
hci_power_on+0x3f/0x200 [bluetooth]
process_one_work+0x1ec/0x380
worker_thread+0x53/0x3e0
? process_one_work+0x380/0x380
kthread+0x11b/0x140
? kthread_associate_blkcg+0xa0/0xa0
ret_from_fork+0x1f/0x30
Modules linked in: llc ip_set nf_tables nfnetlink snd_soc_skl_hda_dsp(+) ip6table_filter snd_soc_hdac_hdmi ip6_tables qrtr_mhi iptable_filter snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic s>
dell_wmi_sysman(+) dell_smbios snd dcdbas mhi vfat videobuf2_vmalloc i2c_i801 videobuf2_memops videobuf2_v4l2 dell_wmi_descriptor fat wmi_bmof soundcore i2c_smbus videobuf2_common libarc4 mei_me mei hid_se>
i2c_hid_acpi i2c_hid video pinctrl_tigerlake fuse
CR2:
ffffae57c0ca5047
This also seems to fix a failure to suspend due to the firmware
download on bootup getting interrupted by the crash:
Bluetooth: hci0: SSR or FW download time out
PM: dpm_run_callback(): acpi_subsys_suspend+0x0/0x60 returns -110
PM: Device serial0-0 failed to suspend: error -110
PM: Some devices failed to suspend, or early wake event detected
Fixes: 83e8196 ("Bluetooth: btqca: Introduce generic QCA ROME support")
Cc: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Cc: stable@vger.kernel.org
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Kiran K [Thu, 8 Apr 2021 17:01:59 +0000 (22:31 +0530)]
Bluetooth: Fix alt settings for incoming SCO with transparent coding format
For incoming SCO connection with transparent coding format, alt setting
of CVSD is getting applied instead of Transparent.
Before fix:
< HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 13
Setting: 0x0003
Input Coding: Linear
Input Data Format: 1's complement
Input Sample Size: 8-bit
# of bits padding at MSB: 0
Air Coding Format: Transparent Data
Retransmission effort: Optimize for link quality (0x02)
Packet type: 0x003f
HV1 may be used
HV2 may be used
HV3 may be used
EV3 may be used
EV4 may be used
EV5 may be used
> HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585
Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
Status: Success (0x00)
> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666
Status: Success (0x00)
Handle: 257
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
Link type: eSCO (0x02)
Transmission interval: 0x0c
Retransmission window: 0x04
RX packet length: 60
TX packet length: 60
Air mode: Transparent (0x03)
........
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674
After fix:
< HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 #309 [hci0] 49.439693
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 13
Setting: 0x0003
Input Coding: Linear
Input Data Format: 1's complement
Input Sample Size: 8-bit
# of bits padding at MSB: 0
Air Coding Format: Transparent Data
Retransmission effort: Optimize for link quality (0x02)
Packet type: 0x003f
HV1 may be used
HV2 may be used
HV3 may be used
EV3 may be used
EV4 may be used
EV5 may be used
> HCI Event: Command Status (0x0f) plen 4 #310 [hci0] 49.440308
Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
Status: Success (0x00)
> HCI Event: Synchronous Connect Complete (0x2c) plen 17 #311 [hci0] 49.449308
Status: Success (0x00)
Handle: 257
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
Link type: eSCO (0x02)
Transmission interval: 0x0c
Retransmission window: 0x04
RX packet length: 60
TX packet length: 60
Air mode: Transparent (0x03)
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #312 [hci0] 49.450421
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #313 [hci0] 49.457927
> HCI Event: Max Slots Change (0x1b) plen 3 #314 [hci0] 49.460345
Handle: 256
Max slots: 5
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #315 [hci0] 49.465453
> SCO Data RX: Handle 257 flags 0x00 dlen 60 #316 [hci0] 49.470502
> SCO Data RX: Handle 257 flags 0x00 dlen 60 #317 [hci0] 49.470519
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #318 [hci0] 49.472996
> SCO Data RX: Handle 257 flags 0x00 dlen 60 #319 [hci0] 49.480412
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #320 [hci0] 49.480492
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #321 [hci0] 49.487989
> SCO Data RX: Handle 257 flags 0x00 dlen 60 #322 [hci0] 49.490303
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #323 [hci0] 49.495496
> SCO Data RX: Handle 257 flags 0x00 dlen 60 #324 [hci0] 49.500304
> SCO Data RX: Handle 257 flags 0x00 dlen 60 #325 [hci0] 49.500311
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Jiapeng Chong [Thu, 15 Apr 2021 08:49:28 +0000 (16:49 +0800)]
Bluetooth: 6lowpan: remove unused function
Fix the following clang warning:
net/bluetooth/6lowpan.c:913:20: warning: unused function 'bdaddr_type'
[-Wunused-function].
net/bluetooth/6lowpan.c:106:35: warning: unused function
'peer_lookup_ba' [-Wunused-function].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Manish Mandlik [Thu, 29 Apr 2021 17:24:22 +0000 (10:24 -0700)]
Bluetooth: Add ncmd=0 recovery handling
During command status or command complete event, the controller may set
ncmd=0 indicating that it is not accepting any more commands. In such a
case, host holds off sending any more commands to the controller. If the
controller doesn't recover from such condition, host will wait forever,
until the user decides that the Bluetooth is broken and may power cycles
the Bluetooth.
This patch triggers the hardware error to reset the controller and
driver when it gets into such state as there is no other wat out.
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Manish Mandlik <mmandlik@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Pavel Skripkin [Mon, 3 May 2021 10:06:05 +0000 (13:06 +0300)]
Bluetooth: hci_qca: fix potential GPF
In qca_power_shutdown() qcadev local variable is
initialized by hu->serdev.dev private data, but
hu->serdev can be NULL and there is a check for it.
Since, qcadev is not used before
if (!hu->serdev)
return;
we can move its initialization after this "if" to
prevent GPF.
Fixes:
5559904ccc08 ("Bluetooth: hci_qca: Add QCA Rome power off support to the qca_power_shutdown()")
Cc: stable@vger.kernel.org # v5.6+
Cc: Rocky Liao <rjliao@codeaurora.org>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Yu Liu [Mon, 19 Apr 2021 23:53:30 +0000 (16:53 -0700)]
Bluetooth: Fix the HCI to MGMT status conversion table
0x2B, 0x31 and 0x33 are reserved for future use but were not present in
the HCI to MGMT conversion table, this caused the conversion to be
incorrect for the HCI status code greater than 0x2A.
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Yu Liu <yudiliu@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Thadeu Lima de Souza Cascardo [Tue, 13 Apr 2021 16:21:03 +0000 (13:21 -0300)]
Bluetooth: cmtp: fix file refcount when cmtp_attach_device fails
When cmtp_attach_device fails, cmtp_add_connection returns the error value
which leads to the caller to doing fput through sockfd_put. But
cmtp_session kthread, which is stopped in this path will also call fput,
leading to a potential refcount underflow or a use-after-free.
Add a refcount before we signal the kthread to stop. The kthread will try
to grab the cmtp_session_sem mutex before doing the fput, which is held
when get_file is called, so there should be no races there.
Reported-by: Ryota Shiga
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Muhammad Usama Anjum [Tue, 13 Apr 2021 17:52:08 +0000 (22:52 +0500)]
Bluetooth: btusb: fix memory leak
If btusb_mtk_submit_wmt_recv_urb returns error, wc should be freed and
then error should be returned to prevent memory leak.
Addresses-Coverity: ("Prevent memory leak")
Fixes:
4cbb375e997d ("Bluetooth: btusb: Fixed too many in-token issue for Mediatek Chip.")
Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
mark-yw.chen [Mon, 12 Apr 2021 15:06:27 +0000 (23:06 +0800)]
Bluetooth: btusb: Add support for Lite-On Mediatek Chip
Add support for Lite-On Mediatek Chip (MT7921)
Lite On VID = 04CA.
* /sys/kernel/debug/usb/devices
T: Bus=01 Lev=03 Prnt=04 Port=01 Cnt=02 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04ca ProdID=3802 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=
000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
Signed-off-by: mark-yw.chen <mark-yw.chen@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
mark-yw.chen [Mon, 12 Apr 2021 15:06:26 +0000 (23:06 +0800)]
Bluetooth: btusb: Fixed too many in-token issue for Mediatek Chip.
This patch reduce in-token during download patch procedure.
Don't submit urb for polling event before sending hci command.
Signed-off-by: mark-yw.chen <mark-yw.chen@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Colin Ian King [Fri, 9 Apr 2021 16:53:14 +0000 (17:53 +0100)]
Bluetooth: virtio_bt: add missing null pointer check on alloc_skb call return
The call to alloc_skb with the GFP_KERNEL flag can return a null sk_buff
pointer, so add a null check to avoid any null pointer deference issues.
Addresses-Coverity: ("Dereference null return value")
Fixes:
afd2daa26c7a ("Bluetooth: Add support for virtio transport driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Yu Liu [Fri, 9 Apr 2021 22:04:06 +0000 (15:04 -0700)]
Bluetooth: Return whether a connection is outbound
When an MGMT_EV_DEVICE_CONNECTED event is reported back to the user
space we will set the flags to tell if the established connection is
outbound or not. This is useful for the user space to log better metrics
and error messages.
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Reviewed-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Yu Liu <yudiliu@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Qiheng Lin [Sat, 10 Apr 2021 02:19:35 +0000 (10:19 +0800)]
Bluetooth: use flexible-array member instead of zero-length array
Fix the following coccicheck warning:
net/bluetooth/msft.c:37:6-13: WARNING use flexible-array member instead
net/bluetooth/msft.c:42:6-10: WARNING use flexible-array member instead
net/bluetooth/msft.c:52:6-10: WARNING use flexible-array member instead
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Kai Ye [Fri, 2 Apr 2021 10:46:29 +0000 (18:46 +0800)]
Bluetooth: 6lowpan: delete unneeded variable initialization
Delete unneeded variable initialization.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
David S. Miller [Fri, 25 Jun 2021 18:59:11 +0000 (11:59 -0700)]
Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2021-06-25
This series contains updates to ice driver only.
Jesse adds support for tracepoints to aide in debugging.
Maciej adds support for PTP auxiliary pin support.
Victor removes the VSI info from the old aggregator when moving the VSI
to another aggregator.
Tony removes an unnecessary VSI assignment.
Christophe Jaillet fixes a memory leak for failed allocation in
ice_pf_dcb_cfg().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Guvenc Gulce [Fri, 25 Jun 2021 15:11:02 +0000 (17:11 +0200)]
net/smc: Ensure correct state of the socket in send path
When smc_sendmsg() is called before the SMC socket initialization has
completed, smc_tx_sendmsg() will access un-initialized fields of the
SMC socket which results in a null-pointer dereference.
Fix this by checking the socket state first in smc_tx_sendmsg().
Fixes:
e0e4b8fa5338 ("net/smc: Add SMC statistics support")
Reported-by: syzbot+5dda108b672b54141857@syzkaller.appspotmail.com
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 25 Jun 2021 18:50:02 +0000 (11:50 -0700)]
Merge tag 'wireless-drivers-next-2021-06-25' of git://git./linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.14
Second, and most likely the last, set of patches for v5.14. mt76 and
iwlwifi have most patches in this round, but rtw88 also has some new
features. Nothing special really standing out.
mt76
* mt7915 MSI support
* disable ASPM on mt7915
* mt7915 tx status reporting
* mt7921 decap offload
rtw88
* beacon filter support
* path diversity support
* firmware crash information via devcoredump
* quirks for disabling pci capabilities
mt7601u
* add USB ID for a XiaoDu WiFi Dongle
ath11k
* enable support for QCN9074 PCI devices
brcmfmac
* support parse country code map from DeviceTree
iwlwifi
* support for new hardware
* support for BIOS control of 11ax enablement in Russia
* support UNII4 band enablement from BIOS
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcin Wojtas [Fri, 25 Jun 2021 10:38:53 +0000 (12:38 +0200)]
net: mdiobus: withdraw fwnode_mdbiobus_register
The newly implemented fwnode_mdbiobus_register turned out to be
problematic - in case the fwnode_/of_/acpi_mdio are built as
modules, a dependency cycle can be observed during the depmod phase of
modules_install, eg.:
depmod: ERROR: Cycle detected: fwnode_mdio -> of_mdio -> fwnode_mdio
depmod: ERROR: Found 2 modules in dependency cycles!
OR:
depmod: ERROR: Cycle detected: acpi_mdio -> fwnode_mdio -> acpi_mdio
depmod: ERROR: Found 2 modules in dependency cycles!
A possible solution could be to rework fwnode_mdiobus_register,
so that to merge the contents of acpi_mdiobus_register and
of_mdiobus_register. However feasible, such change would
be very intrusive and affect huge amount of the of_mdiobus_register
users.
Since there are currently 2 users of ACPI and MDIO
(xgmac_mdio and mvmdio), withdraw the fwnode_mdbiobus_register
and roll back to a simple 'if' condition in affected drivers.
Fixes:
62a6ef6a996f ("net: mdiobus: Introduce fwnode_mdbiobus_register()")
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christophe JAILLET [Sun, 20 Jun 2021 13:28:06 +0000 (15:28 +0200)]
ice: Fix a memory leak in an error handling path in 'ice_pf_dcb_cfg()'
If this 'kzalloc()' fails we must free some resources as in all the other
error handling paths of this function.
Fixes:
348048e724a0 ("ice: Implement iidc operations")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tony Nguyen [Mon, 14 Jun 2021 21:46:07 +0000 (14:46 -0700)]
ice: remove unnecessary VSI assignment
ice_get_vf_vsi() is being called twice for the same VSI. Remove the
unnecessary call/assignment.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Victor Raj [Mon, 14 Jun 2021 21:46:06 +0000 (14:46 -0700)]
ice: remove the VSI info from previous agg
Remove the VSI info from previous aggregator after moving the VSI to a
new aggregator.
Signed-off-by: Victor Raj <victor.raj@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Maciej Machnikowski [Wed, 16 Jun 2021 16:35:22 +0000 (09:35 -0700)]
ice: add support for auxiliary input/output pins
The E810 device supports programmable pins for enabling both input and
output events related to the PTP hardware clock. This includes both
output signals with programmable period, as well as timestamping of
events on input pins.
Add support for enabling these using the CONFIG_PTP_1588_CLOCK
interface.
This allows programming the software defined pins to take advantage of
the hardware clock features.
Signed-off-by: Maciej Machnikowski <maciej.machnikowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
David Thompson [Fri, 25 Jun 2021 01:11:46 +0000 (21:11 -0400)]
Add Mellanox BlueField Gigabit Ethernet driver
This patch adds build and driver logic for the "mlxbf_gige"
Ethernet driver from Mellanox Technologies. The second
generation BlueField SoC from Mellanox supports an
out-of-band GigaBit Ethernet management port to the Arm
subsystem. This driver supports TCP/IP network connectivity
for that port, and provides back-end routines to handle
basic ethtool requests.
The driver interfaces to the Gigabit Ethernet block of
BlueField SoC via MMIO accesses to registers, which contain
control information or pointers describing transmit and
receive resources. There is a single transmit queue, and
the port supports transmit ring sizes of 4 to 256 entries.
There is a single receive queue, and the port supports
receive ring sizes of 32 to 32K entries. The transmit and
receive rings are allocated from DMA coherent memory. There
is a 16-bit producer and consumer index per ring to denote
software ownership and hardware ownership, respectively.
The main driver logic such as probe(), remove(), and netdev
ops are in "mlxbf_gige_main.c". Logic in "mlxbf_gige_rx.c"
and "mlxbf_gige_tx.c" handles the packet processing for
receive and transmit respectively.
The logic in "mlxbf_gige_ethtool.c" supports the handling
of some basic ethtool requests: get driver info, get ring
parameters, get registers, and get statistics.
The logic in "mlxbf_gige_mdio.c" is the driver controlling
the Mellanox BlueField hardware that interacts with a PHY
device via MDIO/MDC pins. This driver does the following:
- At driver probe time, it configures several BlueField MDIO
parameters such as sample rate, full drive, voltage and MDC
- It defines functions to read and write MDIO registers and
registers the MDIO bus.
- It defines the phy interrupt handler reporting a
link up/down status change
- This driver's probe is invoked from the main driver logic
while the phy interrupt handler is registered in ndo_open.
Driver limitations
- Only supports 1Gbps speed
- Only supports GMII protocol
- Supports maximum packet size of 2KB
- Does not support scatter-gather buffering
Testing
- Successful build of kernel for ARM64, ARM32, X86_64
- Tested ARM64 build on FastModels & Palladium
- Tested ARM64 build on several Mellanox boards that are built with
the BlueField-2 SoC. The testing includes coverage in the areas
of networking (e.g. ping, iperf, ifconfig, route), file transfers
(e.g. SCP), and various ethtool options relevant to this driver.
Signed-off-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Liming Sun <limings@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesse Brandeburg [Tue, 8 Jun 2021 23:35:17 +0000 (16:35 -0700)]
ice: add tracepoints
This patch is modeled after one by Scott Peterson for i40e.
Add tracepoints to the driver, via a new file ice_trace.h and some new
trace calls added in interesting places in the driver. Add some tracing
for DIMLIB to help debug interrupt moderation problems.
Performance should not be affected, and this can be very useful
for debugging and adding new trace events to paths in the future.
Note eBPF programs can attach to these events, as well as perf
can count them since we're attaching to the events subsystem
in the kernel.
Co-developed-by: Ben Shelton <benjamin.h.shelton@intel.com>
Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jian-Hong Pan [Thu, 24 Jun 2021 03:22:41 +0000 (11:22 +0800)]
net: bcmgenet: Add mdio-bcm-unimac soft dependency
The Broadcom UniMAC MDIO bus from mdio-bcm-unimac module comes too late.
So, GENET cannot find the ethernet PHY on UniMAC MDIO bus. This leads
GENET fail to attach the PHY as following log:
bcmgenet
fd580000.ethernet: GENET 5.0 EPHY: 0x0000
...
could not attach to PHY
bcmgenet
fd580000.ethernet eth0: failed to connect to PHY
uart-pl011
fe201000.serial: no DMA platform data
libphy: bcmgenet MII bus: probed
...
unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
It is not just coming too late, there is also no way for the module
loader to figure out the dependency between GENET and its MDIO bus
driver unless we provide this MODULE_SOFTDEP hint.
This patch adds the soft dependency to load mdio-bcm-unimac module
before genet module to fix this issue.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=213485
Fixes:
9a4e79697009 ("net: bcmgenet: utilize generic Broadcom UniMAC MDIO controller driver")
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
zhang kai [Thu, 24 Jun 2021 03:09:14 +0000 (11:09 +0800)]
ipv6: delete useless dst check in ip6_dst_lookup_tail
parameter dst always points to null.
Signed-off-by: zhang kai <zhangkaiheb@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 24 Jun 2021 19:47:24 +0000 (22:47 +0300)]
mlxsw: core_env: Avoid unnecessary memcpy()s
Simply get a pointer to the data in the register payload instead of
copying it to a temporary buffer.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bailey Forrest [Thu, 24 Jun 2021 22:08:52 +0000 (15:08 -0700)]
gve: Fix warnings reported for DQO patchset
https://patchwork.kernel.org/project/netdevbpf/list/?series=506637&state=*
- Remove unused variable
- Use correct integer type for string formatting.
- Remove `inline` in C files
Fixes:
9c1a59a2f4bc ("gve: DQO: Add ring allocation and initialization")
Fixes:
a57e5de476be ("gve: DQO: Add TX path")
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 24 Jun 2021 19:58:03 +0000 (12:58 -0700)]
Merge branch 'sctp-pmtud-convergence'
Xin Long says:
====================
sctp: make the PLPMTUD probe more effective and efficient
As David Laight noticed, it currently takes quite some time to find
the optimal pmtu in the Search state, and also lacks the black hole
detection in the Search Complete state. This patchset is to address
them to mke the PLPMTUD probe more effective and efficient.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Thu, 24 Jun 2021 15:48:09 +0000 (11:48 -0400)]
sctp: send the next probe immediately once the last one is acked
These is no need to wait for 'interval' period for the next probe
if the last probe is already acked in search state. The 'interval'
period waiting should be only for probe failure timeout and the
current pmtu check when it's in search complete state.
This change will shorten the probe time a lot in search state, and
also fix the document accordingly.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Thu, 24 Jun 2021 15:48:08 +0000 (11:48 -0400)]
sctp: do black hole detection in search complete state
Currently the PLPMUTD probe will stop for a long period (interval * 30)
after it enters search complete state. If there's a pmtu change on the
route path, it takes a long time to be aware if the ICMP TooBig packet
is lost or filtered.
As it says in rfc8899#section-4.3:
"A DPLPMTUD method MUST NOT rely solely on this method."
(ICMP PTB message).
This patch is to enable the other method for search complete state:
"A PL can use the DPLPMTUD probing mechanism to periodically
generate probe packets of the size of the current PLPMTU."
With this patch, the probe will continue with the current pmtu every
'interval' until the PMTU_RAISE_TIMER 'timeout', which we implement
by adding raise_count to raise the probe size when it counts to 30
and removing the SCTP_PL_COMPLETE check for PMTU_RAISE_TIMER.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 24 Jun 2021 19:55:57 +0000 (12:55 -0700)]
Merge branch 'sja1110-doc'
Vladimir Oltean says:
====================
Document the NXP SJA1110 switch as supported
Now that most of the basic work for SJA1110 support has been done in the
sja1105 DSA driver, let's add the missing documentation bits to make it
clear that the driver can be used.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 24 Jun 2021 14:55:24 +0000 (17:55 +0300)]
net: dsa: sja1105: document the SJA1110 in the Kconfig
Mention support for the SJA1110 in menuconfig.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 24 Jun 2021 14:55:23 +0000 (17:55 +0300)]
Documentation: net: dsa: add details about SJA1110
Denote that the new switch generation is supported, detail its pin
strapping options (with differences compared to SJA1105) and explain how
MDIO access to the internal 100base-T1 and 100base-TX PHYs is performed.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 24 Jun 2021 19:47:39 +0000 (12:47 -0700)]
Merge branch 'gve-dqo'
Bailey Forrest says:
====================
gve: Introduce DQO descriptor format
DQO is the descriptor format for our next generation virtual NIC. The existing
descriptor format will be referred to as "GQI" in the patch set.
One major change with DQO is it uses dual descriptor rings for both TX and RX
queues.
The TX path uses a TX queue to send descriptors to HW, and receives packet
completion events on a TX completion queue.
The RX path posts buffers to HW using an RX buffer queue and receives incoming
packets on an RX queue.
One important note is that DQO descriptors and doorbells are little endian. We
continue to use the existing big endian control plane infrastructure.
The general format of the patch series is:
- Refactor existing code/data structures to be shared by DQO
- Expand admin queues to support DQO device setup
- Expand data structures and device setup to support DQO
- Add logic to setup DQO queues
- Implement datapath
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Bailey Forrest [Thu, 24 Jun 2021 18:06:32 +0000 (11:06 -0700)]
gve: DQO: Add RX path
The RX queue has an array of `gve_rx_buf_state_dqo` objects. All
allocated pages have an associated buf_state object. When a buffer is
posted on the RX buffer queue, the buffer ID will be the buf_state's
index into the RX queue's array.
On packet reception, the RX queue will have one descriptor for each
buffer associated with a received packet. Each RX descriptor will have
a buffer_id that was posted on the buffer queue.
Notable mentions:
- We use a default buffer size of 2048 bytes. Based on page size, we
may post separate sections of a single page as separate buffers.
- The driver holds an extra reference on pages passed up the receive
path with an skb and keeps these pages on a list. When posting new
buffers to the NIC, we check if any of these pages has only our
reference, or another buffer sized segment of the page has no
references. If so, it is free to reuse. This page recycling approach
is a common netdev optimization that reduces page alloc/free calls.
- Pages in the free list have a page_count bias in order to avoid an
atomic increment of pagecount every time we attempt to reuse a page.
# references = page_count() - bias
- In order to track when a page is safe to reuse, we keep track of the
last offset which had a single SKB reference. When this occurs, it
implies that every single other offset is reusable. Otherwise, we
don't know if offsets can be safely reused.
- We maintain two free lists of pages. List #1 (recycled_buf_states)
contains pages we know can be reused right away. List #2
(used_buf_states) contains pages which cannot be used right away. We
only attempt to get pages from list #2 when list #1 is empty. We only
attempt to use a small fixed number pages from list #2 before giving
up and allocating a new page. Both lists are FIFOs in hope that by the
time we attempt to reuse a page, the references were dropped.
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bailey Forrest [Thu, 24 Jun 2021 18:06:31 +0000 (11:06 -0700)]
gve: DQO: Add TX path
TX SKBs will have their buffers DMA mapped with the device. Each buffer
will have at least one TX descriptor associated. Each SKB will also have
a metadata descriptor.
Each TX queue maintains an array of `gve_tx_pending_packet_dqo` objects.
Every TX SKB will have an associated pending_packet object. A TX SKB's
descriptors will use its pending_packet's index as the completion tag,
which will be returned on the TX completion queue.
The device implements a "flow-miss model". Most packets will simply
receive a packet completion. The flow-miss system may choose to process
a packet based on its contents. A TX packet which experiences a flow
miss would receive a miss completion followed by a later reinjection
completion. The miss-completion is received when the packet starts to be
processed by the flow-miss system and the reinjection completion is
received when the flow-miss system completes processing the packet and
sends it on the wire.
Notable mentions:
- Buffers may be freed after receiving the miss-completion, but in order
to avoid packet reordering, we do not complete the SKB until receiving
the reinjection completion.
- The driver must robustly handle the unlikely scenario where a miss
completion does not have an associated reinjection completion. This is
accomplished by maintaining a list of packets which have a pending
reinjection completion. After a short timeout (5 seconds), the
SKB and buffers are released and the pending_packet is moved to a
second list which has a longer timeout (60 seconds), where the
pending_packet will not be reused. When the longer timeout elapses,
the driver may assume the reinjection completion would never be
received and the pending_packet may be reused.
- Completion handling is triggered by an interrupt and is done in the
NAPI poll function. Because the TX path and completion exist in
different threading contexts they maintain their own lists for free
pending_packet objects. The TX path uses a lock-free approach to steal
the list from the completion path.
- Both the TSO context and general context descriptors have metadata
bytes. The device requires that if multiple descriptors contain the
same field, each descriptor must have the same value set for that
field.
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bailey Forrest [Thu, 24 Jun 2021 18:06:30 +0000 (11:06 -0700)]
gve: DQO: Configure interrupts on device up
When interrupts are first enabled, we also set the ratelimits, which
will be static for the entire usage of the device.
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bailey Forrest [Thu, 24 Jun 2021 18:06:29 +0000 (11:06 -0700)]
gve: DQO: Add ring allocation and initialization
Allocate the buffer and completion ring structures. Do not populate the
rings yet. That will happen in the respective rx and tx datapath
follow-on patches
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bailey Forrest [Thu, 24 Jun 2021 18:06:28 +0000 (11:06 -0700)]
gve: DQO: Add core netdev features
Add napi netdev device registration, interrupt handling and initial tx
and rx polling stubs. The stubs will be filled in follow-on patches.
Also:
- LRO feature advertisement and handling
- Also update ethtool logic
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bailey Forrest [Thu, 24 Jun 2021 18:06:27 +0000 (11:06 -0700)]
gve: Update adminq commands to support DQO queues
DQO queue creation requires additional parameters:
- TX completion/RX buffer queue size
- TX completion/RX buffer queue address
- TX/RX queue size
- RX buffer size
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bailey Forrest [Thu, 24 Jun 2021 18:06:26 +0000 (11:06 -0700)]
gve: Add DQO fields for core data structures
- Add new DQO datapath structures:
- `gve_rx_buf_queue_dqo`
- `gve_rx_compl_queue_dqo`
- `gve_rx_buf_state_dqo`
- `gve_tx_desc_dqo`
- `gve_tx_pending_packet_dqo`
- Incorporate these into the existing ring data structures:
- `gve_rx_ring`
- `gve_tx_ring`
Noteworthy mentions:
- `gve_rx_buf_state` represents an RX buffer which was posted to HW.
Each RX queue has an array of these objects and the index into the
array is used as the buffer_id when posted to HW.
- `gve_tx_pending_packet_dqo` is treated similarly for TX queues. The
completion_tag is the index into the array.
- These two structures have links for linked lists which are represented
by 16b indexes into a contiguous array of these structures.
This reduces memory footprint compared to 64b pointers.
- We use unions for the writeable datapath structures to reduce cache
footprint. GQI specific members will renamed like DQO members in a
future patch.
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bailey Forrest [Thu, 24 Jun 2021 18:06:25 +0000 (11:06 -0700)]
gve: Add dqo descriptors
General description of rings and descriptors:
TX ring is used for sending TX packet buffers to the NIC. It has the
following descriptors:
- `gve_tx_pkt_desc_dqo` - Data buffer descriptor
- `gve_tx_tso_context_desc_dqo` - TSO context descriptor
- `gve_tx_general_context_desc_dqo` - Generic metadata descriptor
Metadata is a collection of 12 bytes. We define `gve_tx_metadata_dqo`
which represents the logical interpetation of the metadata bytes. It's
helpful to define this structure because the metadata bytes exist in
multiple descriptor types (including `gve_tx_tso_context_desc_dqo`),
and the device requires same field has the same value in all
descriptors.
The TX completion ring is used to receive completions from the NIC.
Having a separate ring allows for completions to be out of order. The
completion descriptor `gve_tx_compl_desc` has several different types,
most important are packet and descriptor completions. Descriptor
completions are used to notify the driver when descriptors sent on the
TX ring are done being consumed. The descriptor completion is only used
to signal that space is cleared in the TX ring. A packet completion will
be received when a packet transmitted on the TX queue is done being
transmitted.
In addition there are "miss" and "reinjection" completions. The device
implements a "flow-miss model". Most packets will simply receive a
packet completion. The flow-miss system may choose to process a packet
based on its contents. A TX packet which experiences a flow miss would
receive a miss completion followed by a later reinjection completion.
The miss-completion is received when the packet starts to be processed
by the flow-miss system and the reinjection completion is received when
the flow-miss system completes processing the packet and sends it on the
wire.
The RX buffer ring is used to send buffers to HW via the
`gve_rx_desc_dqo` descriptor.
Received packets are put into the RX queue by the device, which
populates the `gve_rx_compl_desc_dqo` descriptor. The RX descriptors
refer to buffers posted by the buffer queue. Received buffers may be
returned out of order, such as when HW LRO is enabled.
Important concepts:
- "TX" and "RX buffer" queues, which send descriptors to the device, use
MMIO doorbells to notify the device of new descriptors.
- "RX" and "TX completion" queues, which receive descriptors from the
device, use a "generation bit" to know when a descriptor was populated
by the device. The driver initializes all bits with the "current
generation". The device will populate received descriptors with the
"next generation" which is inverted from the current generation. When
the ring wraps, the current/next generation are swapped.
- It's the driver's responsibility to ensure that the RX and TX
completion queues are not overrun. This can be accomplished by
limiting the number of descriptors posted to HW.
- TX packets have a 16 bit completion_tag and RX buffers have a 16 bit
buffer_id. These will be returned on the TX completion and RX queues
respectively to let the driver know which packet/buffer was completed.
Bitfields are used to describe descriptor fields. This notation is more
concise and readable than shift-and-mask. It is possible because the
driver is restricted to little endian platforms.
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bailey Forrest [Thu, 24 Jun 2021 18:06:24 +0000 (11:06 -0700)]
gve: Add support for DQO RX PTYPE map
Unlike GQI, DQO RX descriptors do not contain the L3 and L4 type of the
packet. L3 and L4 types are necessary in order to set the hash and csum
on RX SKBs correctly.
DQO RX descriptors instead contain a 10 bit PTYPE index. The PTYPE map
enables the device to tell the driver how to map from PTYPE index to
L3/L4 type.
The device doesn't provide any guarantees about the range of possible
PTYPEs, so we just use a 1024 entry array to implement a fast mapping
structure.
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bailey Forrest [Thu, 24 Jun 2021 18:06:23 +0000 (11:06 -0700)]
gve: adminq: DQO specific device descriptor logic
- In addition to TX and RX queues, DQO has TX completion and RX buffer
queues.
- TX completions are received when the device has completed sending a
packet on the wire.
- RX buffers are posted on a separate queue form the RX completions.
- DQO descriptor rings are allowed to be smaller than PAGE_SIZE.
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bailey Forrest [Thu, 24 Jun 2021 18:06:22 +0000 (11:06 -0700)]
gve: Introduce per netdev `enum gve_queue_format`
The currently supported queue formats are:
- GQI_RDA - GQI with raw DMA addressing
- GQI_QPL - GQI with queue page list
- DQO_RDA - DQO with raw DMA addressing
The old `gve_priv.raw_addressing` value is only used for GQI_RDA, so we
remove it in favor of just checking against GQI_RDA
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bailey Forrest [Thu, 24 Jun 2021 18:06:21 +0000 (11:06 -0700)]
gve: Introduce a new model for device options
The current model uses an integer ID and a fixed size struct for the
parameters of each device option.
The new model allows the device option structs to grow in size over
time. A driver may assume that changes to device option structs will
always be appended.
New device options will also generally have a
`supported_features_mask` so that the driver knows which fields within a
particular device option are enabled.
`gve_device_option.feat_mask` is changed to `required_features_mask`,
and it is a bitmask which must match the value expected by the driver.
This gives the device the ability to break backwards compatibility with
old drivers for certain features by blocking the old drivers from trying
to use the feature.
We maintain ABI compatibility with the old model for
GVE_DEV_OPT_ID_RAW_ADDRESSING in case a driver is using a device which
does not support the new model.
This patch introduces some new terminology:
RDA - Raw DMA Addressing - Buffers associated with SKBs are directly DMA
mapped and read/updated by the device.
QPL - Queue Page Lists - Driver uses bounce buffers which are DMA mapped
with the device for read/write and data is copied from/to SKBs.
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bailey Forrest [Thu, 24 Jun 2021 18:06:20 +0000 (11:06 -0700)]
gve: Make gve_rx_slot_page_info.page_offset an absolute offset
Using `page_offset` like a boolean means a page may only be split into
two sections. With page sizes larger than 4k, this can be very wasteful.
Future commits in this patchset use `struct gve_rx_slot_page_info` in a
way which supports a fixed buffer size and a variable page size.
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bailey Forrest [Thu, 24 Jun 2021 18:06:19 +0000 (11:06 -0700)]
gve: gve_rx_copy: Move padding to an argument
Future use cases will have a different padding value.
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bailey Forrest [Thu, 24 Jun 2021 18:06:18 +0000 (11:06 -0700)]
gve: Move some static functions to a common file
These functions will be shared by the GQI and DQO variants of the GVNIC
driver as of follow-up patches in this series.
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bailey Forrest [Thu, 24 Jun 2021 18:06:17 +0000 (11:06 -0700)]
gve: Update GVE documentation to describe DQO
DQO is a new descriptor format for our next generation virtual NIC.
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yajun Deng [Thu, 24 Jun 2021 07:35:08 +0000 (15:35 +0800)]
usbnet: add usbnet_event_names[] for kevent
Modify the netdev_dbg content from int to char * in usbnet_defer_kevent(),
this looks more readable.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 24 Jun 2021 18:28:13 +0000 (11:28 -0700)]
Merge branch 'add-sparx5i-driver'
Steen Hegelund says:
====================
Adding the Sparx5i Switch Driver
This series provides the Microchip Sparx5i Switch Driver
The SparX-5 Enterprise Ethernet switch family provides a rich set of
Enterprise switching features such as advanced TCAM-based VLAN and QoS
processing enabling delivery of differentiated services, and security
through TCAMbased frame processing using versatile content aware processor
(VCAP). IPv4/IPv6 Layer 3 (L3) unicast and multicast routing is supported
with up to 18K IPv4/9K IPv6 unicast LPM entries and up to 9K IPv4/3K IPv6
(S,G) multicast groups. L3 security features include source guard and
reverse path forwarding (uRPF) tasks. Additional L3 features include
VRF-Lite and IP tunnels (IP over GRE/IP).
The SparX-5 switch family features a highly flexible set of Ethernet ports
with support for 10G and 25G aggregation links, QSGMII, USGMII, and
USXGMII. The device integrates a powerful 1 GHz dual-core ARM® Cortex®-A53
CPU enabling full management of the switch and advanced Enterprise
applications.
The SparX-5 switch family targets managed Layer 2 and Layer 3 equipment in
SMB, SME, and Enterprise where high port count 1G/2.5G/5G/10G switching
with 10G/25G aggregation links is required.
The SparX-5 switch family consists of following SKUs:
VSC7546 SparX-5-64 supports up to 64 Gbps of bandwidth with the following
primary port configurations.
- 6 ×10G
- 16 × 2.5G + 2 × 10G
- 24 × 1G + 4 × 10G
VSC7549 SparX-5-90 supports up to 90 Gbps of bandwidth with the following
primary port configurations.
- 9 × 10G
- 16 × 2.5G + 4 × 10G
- 48 × 1G + 4 × 10G
VSC7552 SparX-5-128 supports up to 128 Gbps of bandwidth with the
following primary port configurations.
- 12 × 10G
- 6 x 10G + 2 x 25G
- 16 × 2.5G + 8 × 10G
- 48 × 1G + 8 × 10G
VSC7556 SparX-5-160 supports up to 160 Gbps of bandwidth with the
following primary port configurations.
- 16 × 10G
- 10 × 10G + 2 × 25G
- 16 × 2.5G + 10 × 10G
- 48 × 1G + 10 × 10G
VSC7558 SparX-5-200 supports up to 200 Gbps of bandwidth with the
following primary port configurations.
- 20 × 10G
- 8 × 25G
In addition, the device supports one 10/100/1000/2500/5000 Mbps
SGMII/SerDes node processor interface (NPI) Ethernet port.
Time sensitive networking (TSN) is supported through a comprehensive set of
features including frame preemption, cut-through, frame replication and
elimination for reliability, enhanced scheduling: credit-based shaping,
time-aware shaping, cyclic queuing, and forwarding, and per-stream policing
and filtering.
Together with IEEE 1588 and IEEE 802.1AS support, this guarantees
low-latency deterministic networking for Industrial Ethernet.
The Sparx5i support is developed on the PCB134 and PCB135 evaluation boards.
- PCB134 main networking features:
- 12x SFP+ front 10G module slots (connected to Sparx5i through SFI).
- 8x SFP28 front 25G module slots (connected to Sparx5i through SFI high
speed).
- Optional, one additional 10/100/1000BASE-T (RJ45) Ethernet port
(on-board VSC8211 PHY connected to Sparx5i through SGMII).
- PCB135 main networking features:
- 48x1G (10/100/1000M) RJ45 front ports using 12xVSC8514 QuadPHY’s each
connected to VSC7558 through QSGMII.
- 4x10G (1G/2.5G/5G/10G) RJ45 front ports using the AQR407 10G QuadPHY
each port connects to VSC7558 through SFI.
- 4x SFP28 25G module slots on back connected to VSC7558 through SFI high
speed.
- Optional, one additional 1G (10/100/1000M) RJ45 port using an on-board
VSC8211 PHY, which can be connected to VSC7558 NPI port through SGMII
using a loopback add-on PCB)
This series provides support for:
- SFPs and DAC cables via PHYLINK with a number of 5G, 10G and 25G
devices and media types.
- Port module configuration for 10M to 25G speeds with SGMII, QSGMII,
1000BASEX, 2500BASEX and 10GBASER as appropriate for these modes.
- SerDes configuration via the Sparx5i SerDes driver (see below).
- Host mode providing register based injection and extraction.
- Switch mode providing MAC/VLAN table learning and Layer2 switching
offloaded to the Sparx5i switch.
- STP state, VLAN support, host/bridge port mode, Forwarding DB, and
configuration and statistics via ethtool.
More support will be added at a later stage.
The Sparx5i Chip Register Model can be browsed at this location:
https://github.com/microchip-ung/sparx-5_reginfo
and the datasheet is available here:
https://ww1.microchip.com/downloads/en/DeviceDoc/SparX-5_Family_L2L3_Enterprise_10G_Ethernet_Switches_Datasheet_00003822B.pdf
The series depends on the following series currently on their way
into the kernel:
- 25G Base-R phy mode
Link: https://lore.kernel.org/r/20210611125453.313308-1-steen.hegelund@microchip.com/
- Sparx5 Reset Driver
Link: https://lore.kernel.org/r/20210416084054.2922327-1-steen.hegelund@microchip.com/
ChangeLog:
v5:
- cover letter
- updated the description to match the latest data sheets
- basic driver
- added error message in case of reset controller error
- port struct: replacing has_sfp with inband, adding pause_adv
- host mode
- port cleanup: unregisters netdevs and then removes phylink etc
- checking for pause_adv when comparing port config changes
- getting duplex and pause state in the link_up callback.
- getting inband, autoneg and pause_adv config in the pcs_config
callback.
- port
- use only the pause_adv bits when getting aneg status
- use the inband state when updating the PCS and port config
v4:
- basic driver:
Using devm_reset_control_get_optional_shared to get the reset
control, and let the reset framework check if it is valid.
- host mode (phylink):
Use the PCS operations to get state and update configuration.
Removed the setting of interface modes. Let phylink control this.
Using the new 5gbase-r and 25gbase-r modes.
Using a helper function to check if one of the 3 base-r modes has
been selected.
Currently it will not be possible to change the interface mode by
changing the speed (e.g via ethtool). This will be added later.
v3:
- basic driver:
- removed unneeded braces
- release reference to ports node after use
- use dev_err_probe to handle DEFER
- update error value when bailing out (a few cases)
- updated formatting of port struct and grouping of bool values
- simplified the spx5_rmw and spx5_inst_rmw inline functions
- host mode (netdev):
- removed lockless flag
- added port timer init
- host mode (packet - manual injection):
- updated error counters in error situations
- implemented timer handling of watermark threshold: stop and
restart netif queues.
- fixed error message handling (rate limited)
- fixed comment style error
- used DIV_ROUND_UP macro
- removed a debug message for open ports
v2:
- Updated bindings:
- drop minItems for the reg property
- Statistics implementation:
- Reorganized statistics into ethtool groups:
eth-phy, eth-mac, eth-ctrl, rmon
as defined by the IEEE 802.3 categories and RFC 2819.
- The remaining statistics are provided by the classic ethtool
statistics command.
- Hostmode support:
- Removed netdev renaming
- Validate ethernet address in sparx5_set_mac_address()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Steen Hegelund [Thu, 24 Jun 2021 07:07:58 +0000 (09:07 +0200)]
arm64: dts: sparx5: Add the Sparx5 switch node
This provides the configuration for the currently available evaluation
boards PCB134 and PCB135.
The series depends on the following series currently on its way
into the kernel:
- Sparx5 Reset Driver
Link: https://lore.kernel.org/r/20210416084054.2922327-1-steen.hegelund@microchip.com/
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steen Hegelund [Thu, 24 Jun 2021 07:07:57 +0000 (09:07 +0200)]
net: sparx5: add ethtool configuration and statistics support
This adds statistic counters for the network interfaces provided
by the driver. It also adds CPU port counters (which are not
exposed by ethtool).
This also adds support for configuring the network interface
parameters via ethtool: speed, duplex, aneg etc.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steen Hegelund [Thu, 24 Jun 2021 07:07:56 +0000 (09:07 +0200)]
net: sparx5: add calendar bandwidth allocation support
This configures the Sparx5 calendars according to the bandwidth
requested in the Device Tree nodes.
It also checks if the total requested bandwidth is within the
specs of the detected Sparx5 models limits.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steen Hegelund [Thu, 24 Jun 2021 07:07:55 +0000 (09:07 +0200)]
net: sparx5: add switching support
This adds SwitchDev support by hardware offloading the
software bridge.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steen Hegelund [Thu, 24 Jun 2021 07:07:54 +0000 (09:07 +0200)]
net: sparx5: add vlan support
This adds Sparx5 VLAN support.
Sparx5 has more VLAN features than provided here, but these will be added
in later series. For now we only add the basic L2 features.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steen Hegelund [Thu, 24 Jun 2021 07:07:53 +0000 (09:07 +0200)]
net: sparx5: add mactable support
This adds the Sparx5 MAC tables: listening for MAC table updates and
updating on request.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / platform / kernel / linux-rpi.git / log