profile/ivi/kernel-x86-ivi.git
13 years agousb_wwan: fix runtime PM in error case
Oliver Neukum [Thu, 10 Feb 2011 14:33:17 +0000 (15:33 +0100)]
usb_wwan: fix runtime PM in error case

An error in the write code path would permanently disable
runtime PM in this driver

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agousb_wwan: fix error in marking device busy
Oliver Neukum [Thu, 10 Feb 2011 14:33:10 +0000 (15:33 +0100)]
usb_wwan: fix error in marking device busy

This fixes two errors:
- the device is busy if a message was recieved even if resubmission fails
- the device is not busy if resubmission fails due to -EPERM

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agousb: gadget: at91_udc: Fix error path
Rahul Ruikar [Wed, 9 Feb 2011 12:44:28 +0000 (13:44 +0100)]
usb: gadget: at91_udc: Fix error path

In function at91udc_probe()
call put_device() when device_register() fails.

Signed-off-by: Rahul Ruikar <rahul.ruikar@gmail.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: isp1760: Implement solution for erratum 2
Sebastian Andrzej Siewior [Tue, 8 Feb 2011 20:07:40 +0000 (21:07 +0100)]
USB: isp1760: Implement solution for erratum 2

The document says:
|2.1 Problem description
|    When at least two USB devices are simultaneously running, it is observed that
|    sometimes the INT corresponding to one of the USB devices stops occurring. This may
|    be observed sometimes with USB-to-serial or USB-to-network devices.
|    The problem is not noticed when only USB mass storage devices are running.
|2.2 Implication
|    This issue is because of the clearing of the respective Done Map bit on reading the ATL
|    PTD Done Map register when an INT is generated by another PTD completion, but is not
|    found set on that read access. In this situation, the respective Done Map bit will remain
|    reset and no further INT will be asserted so the data transfer corresponding to that USB
|    device will stop.
|2.3 Workaround
|    An SOF INT can be used instead of an ATL INT with polling on Done bits. A time-out can
|    be implemented and if a certain Done bit is never set, verification of the PTD completion
|    can be done by reading PTD contents (valid bit).
|    This is a proven workaround implemented in software.

Russell King run into this with an USB-to-serial converter. This patch
implements his suggestion to enable the high frequent SOF interrupt only
at the time we have ATL packages queued. It goes even one step further
and enables the SOF interrupt only if we have more than one ATL packet
queued at the same time.

Cc: <stable@kernel.org> # [2.6.35.x, 2.6.36.x, 2.6.37.x]
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: Mark EHCI LPM functions as __maybe_unused
Maksim Rayskiy [Tue, 8 Feb 2011 18:41:42 +0000 (10:41 -0800)]
USB: Mark EHCI LPM functions as __maybe_unused

ehci_lpm_set_da and ehci_lpm_check are EHCI 1.1 specific functions which
are not used on many platforms but do generate annoying gcc warnings

Signed-off-by: Maksim Rayskiy <mrayskiy@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agousb: fusb300_udc: add more "ep%d" names
Dan Carpenter [Mon, 7 Feb 2011 17:01:36 +0000 (20:01 +0300)]
usb: fusb300_udc: add more "ep%d" names

We need FUSB300_MAX_NUM_EP (16) names otherwise the last 8 names get
initialized to garbage values in fusb300_probe().

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: s3c2410_udc: Add handling for S3C244X dual-packet mode
Fabian Godehardt [Mon, 7 Feb 2011 10:53:05 +0000 (12:53 +0200)]
USB: s3c2410_udc: Add handling for S3C244X dual-packet mode

This is a patch that seems to make the USB hangs on the S3C244X go away.
At least a good amount of ping torture didn't make them come back so far.

The issue is that, if there are several back-to-back packets, sometimes no
interrupt is generated for one of them. This seems to be caused by the
mysterious dual packet mode, which the USB hardware enters automatically
if the endpoint size is half that of the FIFO. (On the 244X, this is the
normal situation for bulk data endpoints.)

There is also a timing factor in this. It seems that what happens is that
the USB hardware automatically sends an acknowledgement if there is only one
packet in the FIFO (the FIFO has space for two). If another packet arrives
before the host has retrieved and acknowledged the previous one, no interrupt
is generated for that second one.

However, there may be an indication. There is one undocumented bit (none
of the 244x manuals document it), OUT_CRS1_REG[1], that seems to be set
suspiciously often when this condition occurs. There is also
CLR_DATA_TOGGLE, OUT_CRS1_REG[7], which may have a function related to
this. (The Samsung manual is rather terse on that, as usual.)

This needs to be examined further. For now, the patch seems to do the
trick.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agousb: pch_udc: Fixed issue which does not work with g_ether
Toshiharu Okada [Mon, 7 Feb 2011 08:01:26 +0000 (17:01 +0900)]
usb: pch_udc: Fixed issue which does not work with g_ether

This PCH_UDC driver does not work normally when "Ethernet gadget" is used.

This patch fixed this issue.
The following was modified.
 - The FIFO flush process.
 - The descriptor creation process.
 - The adjustment of DMA buffer align.

Currently the PCH_UDC driver can work normally with "Ethernet gadget",
"Serial gadget" or "File-backed Storage Gadget".

Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: tools: Add a Makefile
Davidlohr Bueso [Sun, 6 Feb 2011 17:13:37 +0000 (14:13 -0300)]
USB: tools: Add a Makefile

Build USB tools easier.

Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: Gadget: Reorder driver name assignment
Jassi Brar [Sun, 6 Feb 2011 09:47:18 +0000 (18:47 +0900)]
USB: Gadget: Reorder driver name assignment

Reorder the driver->name assignment so the 'iProduct' could be initialized
as well if both 'name' and 'iProduct' come as NULL by default.

Also, remove the misplaced 'extern' keyword.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: Gadget: Composite: Debug interface comparison
Jassi Brar [Sun, 6 Feb 2011 08:39:17 +0000 (17:39 +0900)]
USB: Gadget: Composite: Debug interface comparison

While checking valid interface number we should compare MAX_CONFIG_INTERFACES
with the variable 'intf' (which holds the lower 8bits of w_index) rather than
'w_index'

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoMerge 2.6.38-rc5 into usb-next
Greg Kroah-Hartman [Thu, 17 Feb 2011 17:56:40 +0000 (09:56 -0800)]
Merge 2.6.38-rc5 into usb-next

This is needed to resolve some merge conflicts that were found
in the USB host controller patches, and reported by Stephen Rothwell.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoRevert "USB host: Move AMD PLL quirk to pci-quirks.c"
Greg Kroah-Hartman [Thu, 17 Feb 2011 17:54:16 +0000 (09:54 -0800)]
Revert "USB host: Move AMD PLL quirk to pci-quirks.c"

This reverts commit b7d5b439b7a40dd0a0202fe1c118615a3fcc3b25.
It conflicts with commit baab93afc2844b68d57b0dcca5e1d34c5d7cf411 "USB:
EHCI: ASPM quirk of ISOC on AMD Hudson" and merging the two just doesn't
work properly.

Cc: Andiry Xu <andiry.xu@amd.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alex He <alex.he@amd.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoLinux 2.6.38-rc5 v2.6.38-rc5
Linus Torvalds [Wed, 16 Feb 2011 03:23:45 +0000 (19:23 -0800)]
Linux 2.6.38-rc5

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Linus Torvalds [Wed, 16 Feb 2011 01:51:18 +0000 (17:51 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/gerg/m68knommu

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: set flow handler for secondary interrupt controller of 5249
  m68knommu: remove use of IRQ_FLG_LOCK from 68360 platform support
  m68knommu: fix dereference of port.tty
  m68knommu: add missing linker __modver section
  m68knommu: fix mis-named variable int set_irq_chip loop
  m68knommu: add optimize memmove() function
  m68k: remove arch specific non-optimized memcmp()
  m68knommu: fix use of un-defined _TIF_WORK_MASK
  m68knommu: Rename m548x_wdt.c to m54xx_wdt.c
  m68knommu: fix m548x_wdt.c compilation after headers renaming
  m68knommu: Remove dependencies on nonexistent M68KNOMMU

13 years agom68knommu: set flow handler for secondary interrupt controller of 5249
Greg Ungerer [Wed, 9 Feb 2011 03:43:58 +0000 (13:43 +1000)]
m68knommu: set flow handler for secondary interrupt controller of 5249

The secondary interrupt controller of the ColdFire 5249 code is not
setting the edge triggered flow handler. Set it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
13 years agom68knommu: remove use of IRQ_FLG_LOCK from 68360 platform support
Greg Ungerer [Tue, 8 Feb 2011 11:40:11 +0000 (21:40 +1000)]
m68knommu: remove use of IRQ_FLG_LOCK from 68360 platform support

The m68knommu arch does not define or use IRQ_FLG_LOCK in its irq
subsystem. Remove obsolete use of it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
13 years agom68knommu: fix dereference of port.tty
Greg Ungerer [Tue, 8 Feb 2011 11:32:36 +0000 (21:32 +1000)]
m68knommu: fix dereference of port.tty

The struct_tty associated with a port is now a direct pointer
from within the local private driver info struct. So fix all uses
of it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
13 years agom68knommu: add missing linker __modver section
Greg Ungerer [Tue, 8 Feb 2011 04:45:59 +0000 (14:45 +1000)]
m68knommu: add missing linker __modver section

Add missing linker section __modver to fix:

  LD      vmlinux
/usr/local/bin/../m68k-uclinux/bin/ld.real: error: no memory region specified for loadable section `__modver'

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
13 years agom68knommu: fix mis-named variable int set_irq_chip loop
Greg Ungerer [Tue, 8 Feb 2011 04:40:44 +0000 (14:40 +1000)]
m68knommu: fix mis-named variable int set_irq_chip loop

Compiling for 68360 targets gives:

  CC      arch/m68knommu/platform/68360/ints.o
arch/m68knommu/platform/68360/ints.c: In function ‘init_IRQ’:
arch/m68knommu/platform/68360/ints.c:135:16: error: ‘irq’ undeclared (first use in this function)
arch/m68knommu/platform/68360/ints.c:135:16: note: each undeclared identifier is reported only once for each function it appears in

Fix variable name used.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
13 years agom68knommu: add optimize memmove() function
Greg Ungerer [Thu, 3 Feb 2011 11:58:39 +0000 (21:58 +1000)]
m68knommu: add optimize memmove() function

Add an m68k/coldfire optimized memmove() function for the m68knommu arch.
This is the same function as used by m68k. Simple speed tests show this
is faster once buffers are larger than 4 bytes, and significantly faster
on much larger buffers (4 times faster above about 100 bytes).

This also goes part of the way to fixing a regression caused by commit
ea61bc461d09e8d331a307916530aaae808c72a2 ("m68k/m68knommu: merge MMU and
non-MMU string.h"), which breaks non-coldfire non-mmu builds (which is
the 68x328 and 68360 families). They currently have no memmove() fucntion
defined, since there was none in the m68knommu/lib functions.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
13 years agom68k: remove arch specific non-optimized memcmp()
Greg Ungerer [Thu, 3 Feb 2011 11:31:20 +0000 (21:31 +1000)]
m68k: remove arch specific non-optimized memcmp()

The m68k arch implements its own memcmp() function. It is not optimized
in any way (it is the most strait forward coding of memcmp you can get).
Remove it and use the kernels standard memcmp() implementation.

This also goes part of the way to fixing a regression caused by commit
ea61bc461d09e8d331a307916530aaae808c72a2 ("m68k/m68knommu: merge MMU and
non-MMU string.h"), which breaks non-coldfire non-mmu builds (which is
the 68x328 and 68360 families). They currently have no memcmp() function
defined, since there is none in the m68knommu/lib functions.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
13 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Tue, 15 Feb 2011 23:25:33 +0000 (15:25 -0800)]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (27 commits)
  drm/radeon/kms: hopefully fix pll issues for real (v3)
  drm/radeon/kms: add bounds checking to avivo pll algo
  drm: fix wrong usages of drm_device in DRM Developer's Guide
  drm/radeon/kms: fix a few more atombios endian issues
  drm/radeon/kms: improve 6xx/7xx CS error output
  drm/radeon/kms: check AA resolve registers on r300
  drm/radeon/kms: fix tracking of BLENDCNTL, COLOR_CHANNEL_MASK, and GB_Z on r300
  drm/radeon/kms: use linear aligned for evergreen/ni bo blits
  drm/radeon/kms: use linear aligned for 6xx/7xx bo blits
  drm/radeon: fix race between GPU reset and TTM delayed delete thread.
  drm/radeon/kms: evergreen/ni big endian fixes (v2)
  drm/radeon/kms: 6xx/7xx big endian fixes
  drm/radeon/kms: atombios big endian fixes
  drm/radeon: 6xx/7xx non-kms endian fixes
  drm/radeon/kms: optimize CS state checking for r100->r500
  drm: do not leak kernel addresses via /proc/dri/*/vma
  drm/radeon/kms: add connector table for mac g5 9600
  radeon mkregtable: Add missing fclose() calls
  drm/radeon/kms: fix interlaced modes on dce4+
  drm/radeon: fix memory debugging since d961db75ce86a84f1f04e91ad1014653ed7d9f46
  ...

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Tue, 15 Feb 2011 23:25:11 +0000 (15:25 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  pci: use security_capable() when checking capablities during config space read

13 years agothp: prevent hugepages during args/env copying into the user stack
Andrea Arcangeli [Tue, 15 Feb 2011 18:02:45 +0000 (19:02 +0100)]
thp: prevent hugepages during args/env copying into the user stack

Transparent hugepages can only be created if rmap is fully
functional. So we must prevent hugepages to be created while
is_vma_temporary_stack() is true.

This also optmizes away some harmless but unnecessary setting of
khugepaged_scan.address and it switches some BUG_ON to VM_BUG_ON.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Tue, 15 Feb 2011 23:19:45 +0000 (15:19 -0800)]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI / Video: Probe for output switch method when searching video devices.
  ACPI / Wakeup: Enable button GPEs unconditionally during initialization
  ACPI / ACPICA: Avoid crashing if _PRW is defined for the root object
  ACPI: Fix acpi_os_read_memory() and acpi_os_write_memory() (v2)

13 years agoMerge branch 'tools-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb...
Linus Torvalds [Tue, 15 Feb 2011 23:19:22 +0000 (15:19 -0800)]
Merge branch 'tools-release' of git://git./linux/kernel/git/lenb/linux-idle-2.6

* 'tools-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
  tools: turbostat: style updates
  tools: turbostat: fix bitwise and operand

13 years agoMerge branch 'iomem' into release
Len Brown [Tue, 15 Feb 2011 20:25:48 +0000 (15:25 -0500)]
Merge branch 'iomem' into release

13 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
Linus Torvalds [Tue, 15 Feb 2011 20:07:35 +0000 (12:07 -0800)]
Merge branch 'fixes' of git://git./linux/kernel/git/djbw/async_tx

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (21 commits)
  dmaengine: add slave-dma maintainer
  dma: ipu_idmac: do not lose valid received data in the irq handler
  dmaengine: imx-sdma: fix up param for the last BD in sdma_prep_slave_sg()
  dmaengine: imx-sdma: correct sdmac->status in sdma_handle_channel_loop()
  dmaengine: imx-sdma: return sdmac->status in sdma_tx_status()
  dmaengine: imx-sdma: set sdmac->status to DMA_ERROR in err_out of sdma_prep_slave_sg()
  dmaengine: imx-sdma: remove IMX_DMA_SG_LOOP handling in sdma_prep_slave_sg()
  dmaengine i.MX dma: initialize dma capabilities outside channel loop
  dmaengine i.MX DMA: do not initialize chan_id field
  dmaengine i.MX dma: check sg entries for valid addresses and lengths
  dmaengine i.MX dma: set maximum segment size for our device
  dmaengine i.MX SDMA: reserve channel 0 by not registering it
  dmaengine i.MX SDMA: initialize dma capabilities outside channel loop
  dmaengine i.MX SDMA: do not initialize chan_id field
  dmaengine i.MX sdma: check sg entries for valid addresses and lengths
  dmaengine i.MX sdma: set maximum segment size for our device
  DMA: PL08x: fix channel pausing to timeout rather than lockup
  DMA: PL08x: fix infinite wait when terminating transfers
  dmaengine: imx-sdma: fix inconsistent naming in sdma_assign_cookie()
  dmaengine: imx-sdma: propagate error in sdma_probe() instead of returning 0
  ...

13 years agoMerge branch 'for-2.6.38' of git://linux-nfs.org/~bfields/linux
Linus Torvalds [Tue, 15 Feb 2011 20:06:38 +0000 (12:06 -0800)]
Merge branch 'for-2.6.38' of git://linux-nfs.org/~bfields/linux

* 'for-2.6.38' of git://linux-nfs.org/~bfields/linux:
  nfsd: break lease on unlink due to rename
  nfsd4: acquire only one lease per file
  nfsd4: modify fi_delegations under recall_lock
  nfsd4: remove unused deleg dprintk's.
  nfsd4: split lease setting into separate function
  nfsd4: fix leak on allocation error
  nfsd4: add helper function for lease setup
  nfsd4: split up nfsd_break_deleg_cb
  NFSD: memory corruption due to writing beyond the stat array
  NFSD: use nfserr for status after decode_cb_op_status
  nfsd: don't leak dentry count on mnt_want_write failure

13 years agoMerge branches 'core-fixes-for-linus' and 'timers-fixes-for-linus' of git://git.kerne...
Linus Torvalds [Tue, 15 Feb 2011 18:19:18 +0000 (10:19 -0800)]
Merge branches 'core-fixes-for-linus' and 'timers-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  Revert "lockdep, timer: Fix del_timer_sync() annotation"

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  timer debug: Hide kernel addresses via %pK in /proc/timer_list

13 years agoMerge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 15 Feb 2011 18:18:48 +0000 (10:18 -0800)]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix text_poke_smp_batch() deadlock
  perf tools: Fix thread_map event synthesizing in top and record
  watchdog, nmi: Lower the severity of error messages
  ARM: oprofile: Fix backtraces in timer mode
  oprofile: Fix usage of CONFIG_HW_PERF_EVENTS for oprofile_perf_init and friends

13 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Tue, 15 Feb 2011 18:18:29 +0000 (10:18 -0800)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, dmi, debug: Log board name (when present) in dmesg/oops output
  x86, ioapic: Don't warn about non-existing IOAPICs if we have none
  x86: Fix mwait_usable section mismatch
  x86: Readd missing irq_to_desc() in fixup_irq()
  x86: Fix section mismatch in LAPIC initialization

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Tue, 15 Feb 2011 17:40:27 +0000 (09:40 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: matrix_keypad - increase the limit of rows and columns
  Input: wacom - fix error path in wacom_probe()
  Input: ads7846 - check proper condition when freeing gpio
  Revert "Input: do not pass injected events back to the originating handler"
  Input: sysrq - rework re-inject logic
  Input: serio - clear pending rescans after sysfs driver rebind
  Input: rotary_encoder - use proper irqflags
  Input: wacom_w8001 - report resolution to userland

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
Linus Torvalds [Tue, 15 Feb 2011 16:06:36 +0000 (08:06 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  get rid of nameidata_dentry_drop_rcu() calling nameidata_drop_rcu()
  drop out of RCU in return_reval
  split do_revalidate() into RCU and non-RCU cases
  in do_lookup() split RCU and non-RCU cases of need_revalidate
  nothing in do_follow_link() is going to see RCU

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
Linus Torvalds [Tue, 15 Feb 2011 16:00:35 +0000 (08:00 -0800)]
Merge git://git./linux/kernel/git/mason/btrfs-unstable

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: check return value of alloc_extent_map()
  Btrfs - Fix memory leak in btrfs_init_new_device()
  btrfs: prevent heap corruption in btrfs_ioctl_space_info()
  Btrfs: Fix balance panic
  Btrfs: don't release pages when we can't clear the uptodate bits
  Btrfs: fix page->private races

13 years agos390: remove task_show_regs
Martin Schwidefsky [Tue, 15 Feb 2011 08:43:32 +0000 (09:43 +0100)]
s390: remove task_show_regs

task_show_regs used to be a debugging aid in the early bringup days
of Linux on s390. /proc/<pid>/status is a world readable file, it
is not a good idea to show the registers of a process. The only
correct fix is to remove task_show_regs.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agopci: use security_capable() when checking capablities during config space read
Chris Wright [Tue, 15 Feb 2011 01:21:49 +0000 (17:21 -0800)]
pci: use security_capable() when checking capablities during config space read

This reintroduces commit 47970b1b which was subsequently reverted
as f00eaeea.  The original change was broken and caused X startup
failures and generally made privileged processes incapable of reading
device dependent config space.  The normal capable() interface returns
true on success, but the LSM interface returns 0 on success.  This thinko
is now fixed in this patch, and has been confirmed to work properly.

So, once again...Eric Paris noted that commit de139a3 ("pci: check caps
from sysfs file open to read device dependent config space") caused the
capability check to bypass security modules and potentially auditing.
Rectify this by calling security_capable() when checking the open file's
capabilities for config space reads.

Reported-by: Eric Paris <eparis@redhat.com>
Tested-by: Dave Young <hidave.darkstar@gmail.com>
Acked-by: James Morris <jmorris@namei.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Alex Riesen <raa.lkml@gmail.com>
Cc: Sedat Dilek <sedat.dilek@googlemail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: James Morris <jmorris@namei.org>
13 years agoget rid of nameidata_dentry_drop_rcu() calling nameidata_drop_rcu()
Al Viro [Tue, 15 Feb 2011 06:42:59 +0000 (01:42 -0500)]
get rid of nameidata_dentry_drop_rcu() calling nameidata_drop_rcu()

can't happen anymore and didn't work right anyway

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
13 years agodrop out of RCU in return_reval
Al Viro [Tue, 15 Feb 2011 06:35:28 +0000 (01:35 -0500)]
drop out of RCU in return_reval

... thus killing the need to handle drop-from-RCU in d_revalidate()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
13 years agosplit do_revalidate() into RCU and non-RCU cases
Al Viro [Tue, 15 Feb 2011 06:32:55 +0000 (01:32 -0500)]
split do_revalidate() into RCU and non-RCU cases

fixing oopsen in lookup_one_len()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
13 years agoin do_lookup() split RCU and non-RCU cases of need_revalidate
Al Viro [Tue, 15 Feb 2011 06:26:22 +0000 (01:26 -0500)]
in do_lookup() split RCU and non-RCU cases of need_revalidate

and use unlikely() instead of gotos, for fsck sake...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
13 years agonothing in do_follow_link() is going to see RCU
Al Viro [Tue, 15 Feb 2011 05:38:26 +0000 (00:38 -0500)]
nothing in do_follow_link() is going to see RCU

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
13 years agox86, dmi, debug: Log board name (when present) in dmesg/oops output
Naga Chumbalkar [Mon, 14 Feb 2011 22:47:17 +0000 (22:47 +0000)]
x86, dmi, debug: Log board name (when present) in dmesg/oops output

The "Type 2" SMBIOS record that contains Board Name is not
strictly required and may be absent in the SMBIOS on some
platforms.

( Please note that Type 2 is not listed in Table 3 in Sec 6.2
  ("Required Structures and Data") of the SMBIOS v2.7
  Specification. )

Use the Manufacturer Name (aka System Vendor) name.
Print Board Name only when it is present.

Before the fix:
  (i) dmesg output: DMI: /ProLiant DL380 G6, BIOS P62 01/29/2011
 (ii) oops output:  Pid: 2170, comm: bash Not tainted 2.6.38-rc4+ #3 /ProLiant DL380 G6

After the fix:
  (i) dmesg output: DMI: HP ProLiant DL380 G6, BIOS P62 01/29/2011
 (ii) oops output:  Pid: 2278, comm: bash Not tainted 2.6.38-rc4+ #4 HP ProLiant DL380 G6

Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: <stable@kernel.org> # .3x - good for debugging, please apply as far back as it applies cleanly
LKML-Reference: <20110214224423.2182.13929.sendpatchset@nchumbalkar.americas.hpqcorp.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agox86, ioapic: Don't warn about non-existing IOAPICs if we have none
Paul Bolle [Mon, 14 Feb 2011 21:52:38 +0000 (22:52 +0100)]
x86, ioapic: Don't warn about non-existing IOAPICs if we have none

mp_find_ioapic() prints errors like:

    ERROR: Unable to locate IOAPIC for GSI 13

if it can't find the IOAPIC that manages that specific GSI. I
see errors like that at every boot of a laptop that apparently
doesn't have any IOAPICs.

But if there are no IOAPICs it doesn't seem to be an error that
none can be found. A solution that gets rid of this message is
to directly return if nr_ioapics (still) is zero. (But keep
returning -1 in that case, so nothing breaks from this change.)

The call chain that generates this error is:

pnpacpi_allocated_resource()
    case ACPI_RESOURCE_TYPE_IRQ:
        pnpacpi_parse_allocated_irqresource()
            acpi_get_override_irq()
                 mp_find_ioapic()

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoMerge branch 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile...
Ingo Molnar [Tue, 15 Feb 2011 03:10:35 +0000 (04:10 +0100)]
Merge branch 'urgent' of git://git./linux/kernel/git/rric/oprofile into perf/urgent

13 years agodrm/radeon/kms: hopefully fix pll issues for real (v3)
Alex Deucher [Mon, 14 Feb 2011 16:43:11 +0000 (11:43 -0500)]
drm/radeon/kms: hopefully fix pll issues for real (v3)

The problematic boards have a recommended reference divider
to be used when spread spectrum is enabled on the laptop panel.
Enable the use of the recommended reference divider along with
the new pll algo.

v2: testing options

v3: When using the fixed reference divider with LVDS, prefer
min m to max p and use fractional feedback dividers.

Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=28852
https://bugzilla.kernel.org/show_bug.cgi?id=24462
https://bugzilla.kernel.org/show_bug.cgi?id=26552
MacbookPro issues reported by Justin Mattock <justinmattock@gmail.com>

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agodrm/radeon/kms: add bounds checking to avivo pll algo
Alex Deucher [Mon, 14 Feb 2011 16:43:10 +0000 (11:43 -0500)]
drm/radeon/kms: add bounds checking to avivo pll algo

Prevent divider overflow.
Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=28932

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agodrm: fix wrong usages of drm_device in DRM Developer's Guide
Xiao Jiang [Mon, 14 Feb 2011 09:58:23 +0000 (17:58 +0800)]
drm: fix wrong usages of drm_device in DRM Developer's Guide

A few wrong usages of drm_device, which should be drm_driver.

Signed-off-by: Xiao Jiang <jgq516@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agodrm/radeon/kms: fix a few more atombios endian issues
Alex Deucher [Mon, 14 Feb 2011 21:16:22 +0000 (16:16 -0500)]
drm/radeon/kms: fix a few more atombios endian issues

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agoMerge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Mon, 14 Feb 2011 22:49:29 +0000 (14:49 -0800)]
Merge branch 'fixes' of /home/rmk/linux-2.6-arm

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6657/1: hw_breakpoint: fix ptrace breakpoint advertising on unsupported arch
  ARM: 6656/1: hw_breakpoint: avoid UNPREDICTABLE behaviour when reading DBGDSCR
  ARM: 6658/1: collie: do actually pass locomo_info to locomo driver
  ARM: 6659/1: Thumb-2: Make CONFIG_OABI_COMPAT depend on !CONFIG_THUMB2_KERNEL
  ARM: 6654/1: perf/oprofile: fix off-by-one in stack check
  ARM: fixup SMP alternatives in modules
  ARM: make SWP emulation explicit on !CPU_USE_DOMAINS
  ARM: Avoid building unsafe kernels on OMAP2 and MX3
  ARM: pxa: Properly configure PWM period for palm27x
  ARM: pxa: only save/restore registers when pm functions are defined
  ARM: pxa/colibri: use correct SD detect pin
  ARM: pxa: fix mfpr_sync to read from valid offset

13 years agoBtrfs: check return value of alloc_extent_map()
Tsutomu Itoh [Mon, 14 Feb 2011 00:45:29 +0000 (00:45 +0000)]
Btrfs: check return value of alloc_extent_map()

I add the check on the return value of alloc_extent_map() to several places.
In addition, alloc_extent_map() returns only the address or NULL.
Therefore, check by IS_ERR() is unnecessary. So, I remove IS_ERR() checking.

Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
13 years agoBtrfs - Fix memory leak in btrfs_init_new_device()
Ilya Dryomov [Sun, 6 Feb 2011 19:58:21 +0000 (19:58 +0000)]
Btrfs - Fix memory leak in btrfs_init_new_device()

Memory allocated by calling kstrdup() should be freed.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
13 years agobtrfs: prevent heap corruption in btrfs_ioctl_space_info()
Dan Rosenberg [Mon, 14 Feb 2011 21:04:23 +0000 (16:04 -0500)]
btrfs: prevent heap corruption in btrfs_ioctl_space_info()

Commit bf5fc093c5b625e4259203f1cee7ca73488a5620 refactored
btrfs_ioctl_space_info() and introduced several security issues.

space_args.space_slots is an unsigned 64-bit type controlled by a
possibly unprivileged caller.  The comparison as a signed int type
allows providing values that are treated as negative and cause the
subsequent allocation size calculation to wrap, or be truncated to 0.
By providing a size that's truncated to 0, kmalloc() will return
ZERO_SIZE_PTR.  It's also possible to provide a value smaller than the
slot count.  The subsequent loop ignores the allocation size when
copying data in, resulting in a heap overflow or write to ZERO_SIZE_PTR.

The fix changes the slot count type and comparison typecast to u64,
which prevents truncation or signedness errors, and also ensures that we
don't copy more data than we've allocated in the subsequent loop.  Note
that zero-size allocations are no longer possible since there is already
an explicit check for space_args.space_slots being 0 and truncation of
this value is no longer an issue.

Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Josef Bacik <josef@redhat.com>
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
13 years agoBtrfs: Fix balance panic
Yan, Zheng [Mon, 14 Feb 2011 21:00:03 +0000 (16:00 -0500)]
Btrfs: Fix balance panic

Mark the cloned backref_node as checked in clone_backref_node()

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
13 years agoMerge branch 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6
Linus Torvalds [Mon, 14 Feb 2011 18:10:37 +0000 (10:10 -0800)]
Merge branch 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6

* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6:
  Revert "dt: add documentation of ARM dt boot interface"

13 years agoMerge branch 'rtc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip...
Linus Torvalds [Mon, 14 Feb 2011 18:10:07 +0000 (10:10 -0800)]
Merge branch 'rtc-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'rtc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  RTC: Fix minor compile warning
  RTC: Convert rtc drivers to use the alarm_irq_enable method
  RTC: Fix rtc driver ioctl specific shortcutting

13 years agoBtrfs: don't release pages when we can't clear the uptodate bits
Chris Mason [Mon, 14 Feb 2011 17:52:08 +0000 (12:52 -0500)]
Btrfs: don't release pages when we can't clear the uptodate bits

Btrfs tracks uptodate state in an rbtree as well as in the
page bits.  This is supposed to enable us to use block sizes other than
the page size, but there are a few parts still missing before that
completely works.

But, our readpage routine trusts this additional range based tracking
of uptodateness, much in the same way the buffer head up to date bits
are trusted for the other filesystems.

The problem is that sometimes we need to allocate memory in order to
split records in the rbtree, even when we are just clearing bits.  This
can be difficult when our clearing function is called GFP_ATOMIC, which
can happen in the releasepage path.

So, what happens today looks like this:

releasepage called with GFP_ATOMIC
btrfs_releasepage calls clear_extent_bit
clear_extent_bit fails to allocate ram, leaving the up to date bit set
btrfs_releasepage returns success

The end result is the page being gone, but btrfs thinking the range is
up to date.   Later on if someone tries to read that same page, the
btrfs readpage code will return immediately thinking the page is already
up to date.

This commit fixes things to fail the releasepage when we can't clear the
extent state bits.  It covers both data pages and metadata tree blocks.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
13 years agoBtrfs: fix page->private races
Chris Mason [Thu, 10 Feb 2011 17:35:00 +0000 (12:35 -0500)]
Btrfs: fix page->private races

There is a race where btrfs_releasepage can drop the
page->private contents just as alloc_extent_buffer is setting
up pages for metadata.  Because of how the Btrfs page flags work,
this results in us skipping the crc on the page during IO.

This patch sovles the race by waiting until after the extent buffer
is inserted into the radix tree before it sets page private.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
13 years agonfsd: break lease on unlink due to rename
J. Bruce Fields [Sun, 6 Feb 2011 21:46:30 +0000 (16:46 -0500)]
nfsd: break lease on unlink due to rename

4795bb37effb7b8fe77e2d2034545d062d3788a8 "nfsd: break lease on unlink,
link, and rename", only broke the lease on the file that was being
renamed, and didn't handle the case where the target path refers to an
already-existing file that will be unlinked by a rename--in that case
the target file should have any leases broken as well.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
13 years agonfsd4: acquire only one lease per file
J. Bruce Fields [Tue, 1 Feb 2011 00:20:39 +0000 (19:20 -0500)]
nfsd4: acquire only one lease per file

Instead of acquiring one lease each time another client opens a file,
nfsd can acquire just one lease to represent all of them, and reference
count it to determine when to release it.

This fixes a regression introduced by
c45821d263a8a5109d69a9e8942b8d65bcd5f31a "locks: eliminate fl_mylease
callback": after that patch, only the struct file * is used to determine
who owns a given lease.  But since we recently converted the server to
share a single struct file per open, if we acquire multiple leases on
the same file from nfsd, it then becomes impossible on unlocking a lease
to determine which of those leases (all of whom share the same struct
file *) we meant to remove.

Thanks to Takashi Iwai <tiwai@suse.de> for catching a bug in a previous
version of this patch.

Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
13 years agonfsd4: modify fi_delegations under recall_lock
J. Bruce Fields [Mon, 7 Feb 2011 21:53:46 +0000 (16:53 -0500)]
nfsd4: modify fi_delegations under recall_lock

Modify fi_delegations only under the recall_lock, allowing us to use
that list on lease breaks.

Also some trivial cleanup to simplify later changes.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
13 years agonfsd4: remove unused deleg dprintk's.
J. Bruce Fields [Mon, 7 Feb 2011 20:44:12 +0000 (15:44 -0500)]
nfsd4: remove unused deleg dprintk's.

These aren't all that useful, and get in the way of the next steps.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
13 years agonfsd4: split lease setting into separate function
J. Bruce Fields [Mon, 31 Jan 2011 22:58:10 +0000 (17:58 -0500)]
nfsd4: split lease setting into separate function

Splitting some code into a separate function which we'll be adding some
more to.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
13 years agonfsd4: fix leak on allocation error
J. Bruce Fields [Mon, 31 Jan 2011 22:14:55 +0000 (17:14 -0500)]
nfsd4: fix leak on allocation error

Also share some common exit code.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
13 years agonfsd4: add helper function for lease setup
J. Bruce Fields [Mon, 31 Jan 2011 16:55:12 +0000 (11:55 -0500)]
nfsd4: add helper function for lease setup

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
13 years agonfsd4: split up nfsd_break_deleg_cb
J. Bruce Fields [Mon, 31 Jan 2011 16:54:04 +0000 (11:54 -0500)]
nfsd4: split up nfsd_break_deleg_cb

We'll be adding some more code here soon.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
13 years agoNFSD: memory corruption due to writing beyond the stat array
Konstantin Khorenko [Tue, 1 Feb 2011 14:16:29 +0000 (17:16 +0300)]
NFSD: memory corruption due to writing beyond the stat array

If nfsd fails to find an exported via NFS file in the readahead cache, it
should increment corresponding nfsdstats counter (ra_depth[10]), but due to a
bug it may instead write to ra_depth[11], corrupting the following field.

In a kernel with NFSDv4 compiled in the corruption takes the form of an
increment of a counter of the number of NFSv4 operation 0's received; since
there is no operation 0, this is harmless.

In a kernel with NFSDv4 disabled it corrupts whatever happens to be in the
memory beyond nfsdstats.

Signed-off-by: Konstantin Khorenko <khorenko@openvz.org>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
13 years agoNFSD: use nfserr for status after decode_cb_op_status
Benny Halevy [Thu, 13 Jan 2011 09:25:31 +0000 (11:25 +0200)]
NFSD: use nfserr for status after decode_cb_op_status

Bugs introduced in 85a56480191ca9f08fc775c129b9eb5c8c1f2c05
"NFSD: Update XDR decoders in NFSv4 callback client"

Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
13 years agonfsd: don't leak dentry count on mnt_want_write failure
J. Bruce Fields [Sat, 15 Jan 2011 01:00:02 +0000 (20:00 -0500)]
nfsd: don't leak dentry count on mnt_want_write failure

The exit cleanup isn't quite right here.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
13 years agoRevert "dt: add documentation of ARM dt boot interface"
Grant Likely [Mon, 14 Feb 2011 15:13:20 +0000 (08:13 -0700)]
Revert "dt: add documentation of ARM dt boot interface"

This reverts commit 9830fcd6f6a4781d8b46d2b35c13b39f30915c63.

The ARM dt support has not been merged yet; this documentation update
was premature.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
13 years agox86: Fix mwait_usable section mismatch
Borislav Petkov [Fri, 11 Feb 2011 17:17:54 +0000 (18:17 +0100)]
x86: Fix mwait_usable section mismatch

We use it in non __cpuinit code now too so drop marker.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <20110211171754.GA21047@aftab>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agodmaengine: add slave-dma maintainer
Dan Williams [Mon, 14 Feb 2011 08:42:08 +0000 (00:42 -0800)]
dmaengine: add slave-dma maintainer

Slave-dma has become the predominant usage model for dmaengine and needs
special attention.  Memory-to-memory dma usage cases will continue to be
maintained by Dan.

Cc: Alan Cox <alan@linux.intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
13 years agoMerge branch 'imx' into dmaengine-fixes
Dan Williams [Mon, 14 Feb 2011 10:40:46 +0000 (02:40 -0800)]
Merge branch 'imx' into dmaengine-fixes

13 years agodma: ipu_idmac: do not lose valid received data in the irq handler
Anatolij Gustschin [Mon, 31 Jan 2011 12:22:29 +0000 (13:22 +0100)]
dma: ipu_idmac: do not lose valid received data in the irq handler

Currently when two or more buffers are queued by the camera driver
and so the double buffering is enabled in the idmac, we lose one
frame comming from CSI since the reporting of arrival of the first
frame is deferred by the DMAIC_7_EOF interrupt handler and reporting
of the arrival of the last frame is not done at all. So when requesting
N frames from the image sensor we actually receive N - 1 frames in
user space.

The reason for this behaviour is that the DMAIC_7_EOF interrupt
handler misleadingly assumes that the CUR_BUF flag is pointing to the
buffer used by the IDMAC. Actually it is not the case since the
CUR_BUF flag will be flipped by the FSU when the FSU is sending the
<TASK>_NEW_FRM_RDY signal when new frame data is delivered by the CSI.
When sending this singal, FSU updates the DMA_CUR_BUF and the
DMA_BUFx_RDY flags: the DMA_CUR_BUF is flipped, the DMA_BUFx_RDY
is cleared, indicating that the frame data is beeing written by
the IDMAC to the pointed buffer. DMA_BUFx_RDY is supposed to be
set to the ready state again by the MCU, when it has handled the
received data. DMAIC_7_CUR_BUF flag won't be flipped here by the
IPU, so waiting for this event in the EOF interrupt handler is wrong.
Actually there is no spurious interrupt as described in the comments,
this is the valid DMAIC_7_EOF interrupt indicating reception of the
frame from CSI.

The patch removes code that waits for flipping of the DMAIC_7_CUR_BUF
flag in the DMAIC_7_EOF interrupt handler. As the comment in the
current code denotes, this waiting doesn't help anyway. As a result
of this removal the reporting of the first arrived frame is not
deferred to the time of arrival of the next frame and the drivers
software flag 'ichan->active_buffer' is in sync with DMAIC_7_CUR_BUF
flag, so the reception of all requested frames works.

This has been verified on the hardware which is triggering the
image sensor by the programmable state machine, allowing to
obtain exact number of frames. On this hardware we do not tolerate
losing frames.

This patch also removes resetting the DMA_BUFx_RDY flags of
all channels in ipu_disable_channel() since transfers on other
DMA channels might be triggered by other running tasks and the
buffers should always be ready for data sending or reception.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
13 years agoMerge branch 'fortglx/2.6.38/tip/timers/rtc' of git://git.linaro.org/people/jstultz...
Thomas Gleixner [Mon, 14 Feb 2011 08:00:30 +0000 (09:00 +0100)]
Merge branch 'fortglx/2.6.38/tip/timers/rtc' of git://git.linaro.org/people/jstultz/linux into timers/urgent

13 years agoklist: Fix object alignment on 64-bit.
David Miller [Mon, 14 Feb 2011 00:37:07 +0000 (16:37 -0800)]
klist: Fix object alignment on 64-bit.

Commit c0e69a5bbc6f ("klist.c: bit 0 in pointer can't be used as flag")
intended to make sure that all klist objects were at least pointer size
aligned, but used the constant "4" which only works on 32-bit.

Use "sizeof(void *)" which is correct in all cases.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: stable <stable@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoMerge remote branch 'intel/drm-intel-fixes' of /ssd/git/drm-next into drm-fixes
Dave Airlie [Mon, 14 Feb 2011 00:13:34 +0000 (10:13 +1000)]
Merge remote branch 'intel/drm-intel-fixes' of /ssd/git/drm-next into drm-fixes

* 'intel/drm-intel-fixes' of /ssd/git/drm-next:
  drm/i915: Fix resume regression from 5d1d0cc
  drm/i915/tv: Use polling rather than interrupt-based hotplug
  drm/i915: Trigger modesetting if force-audio changes
  drm/i915/sdvo: If we have an EDID confirm it matches the mode of the connection
  drm/i915: Disable RC6 on Ironlake
  drm/i915/lvds: Restore dithering on native modes for gen2/3
  drm/i915: Invalidate TLB caches on SNB BLT/BSD rings

13 years agodrm/radeon/kms: improve 6xx/7xx CS error output
Alex Deucher [Sun, 13 Feb 2011 23:42:41 +0000 (18:42 -0500)]
drm/radeon/kms: improve 6xx/7xx CS error output

Makes debugging CS rejections much easier.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agodrm/radeon/kms: check AA resolve registers on r300
Marek Olšák [Mon, 14 Feb 2011 00:01:10 +0000 (01:01 +0100)]
drm/radeon/kms: check AA resolve registers on r300

This is an important security fix because we allowed arbitrary values
to be passed to AARESOLVE_OFFSET. This also puts the right buffer address
in the register.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agodrm/radeon/kms: fix tracking of BLENDCNTL, COLOR_CHANNEL_MASK, and GB_Z on r300
Marek Olšák [Mon, 14 Feb 2011 00:01:09 +0000 (01:01 +0100)]
drm/radeon/kms: fix tracking of BLENDCNTL, COLOR_CHANNEL_MASK, and GB_Z on r300

Also move ZB_DEPTHCLEARVALUE to the list of safe regs.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agodrm/radeon/kms: use linear aligned for evergreen/ni bo blits
Alex Deucher [Thu, 10 Feb 2011 19:51:34 +0000 (14:51 -0500)]
drm/radeon/kms: use linear aligned for evergreen/ni bo blits

Not only is linear aligned supposedly more performant,
linear general is only supported by the CB in single
slice mode.  The texture hardware doesn't support
linear general, but I think the hw automatically
upgrades it to linear aligned.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agodrm/radeon/kms: use linear aligned for 6xx/7xx bo blits
Alex Deucher [Thu, 10 Feb 2011 19:51:33 +0000 (14:51 -0500)]
drm/radeon/kms: use linear aligned for 6xx/7xx bo blits

Not only is linear aligned supposedly more performant,
linear general is only supported by the CB in single
slice mode.  The texture hardware doesn't support
linear general, but I think the hw automatically
upgrades it to linear aligned.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agodrm/radeon: fix race between GPU reset and TTM delayed delete thread.
Dave Airlie [Thu, 10 Feb 2011 04:46:06 +0000 (14:46 +1000)]
drm/radeon: fix race between GPU reset and TTM delayed delete thread.

My evergreen has been in a remote PC for week and reset has never once
saved me from certain doom, I finally relocated to the box with a
serial cable and noticed an oops when the GPU resets, and the TTM
delayed delete thread tries to remove something from the GTT.

This stops the delayed delete thread from executing across the GPU
reset handler, and woot I can GPU reset now.

Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agodrm/radeon/kms: evergreen/ni big endian fixes (v2)
Alex Deucher [Mon, 14 Feb 2011 00:06:33 +0000 (19:06 -0500)]
drm/radeon/kms: evergreen/ni big endian fixes (v2)

Based on 6xx/7xx endian fixes from Cédric Cano.

v2: fix typo in shader

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agodrm/radeon/kms: 6xx/7xx big endian fixes
Cédric Cano [Sat, 12 Feb 2011 00:45:38 +0000 (19:45 -0500)]
drm/radeon/kms: 6xx/7xx big endian fixes

agd5f: minor cleanups

Signed-off-by: Cédric Cano <ccano@interfaceconcept.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agodrm/radeon/kms: atombios big endian fixes
Cédric Cano [Sat, 12 Feb 2011 00:45:37 +0000 (19:45 -0500)]
drm/radeon/kms: atombios big endian fixes

agd5f: additional cleanups/fixes

Signed-off-by: Cédric Cano <ccano@interfaceconcept.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agodrm/radeon: 6xx/7xx non-kms endian fixes
Cédric Cano [Sat, 12 Feb 2011 00:45:36 +0000 (19:45 -0500)]
drm/radeon: 6xx/7xx non-kms endian fixes

agd5f: minor cleanups

Signed-off-by: Cédric Cano <ccano@interfaceconcept.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agodrm/radeon/kms: optimize CS state checking for r100->r500
Marek Olšák [Sat, 12 Feb 2011 18:21:35 +0000 (19:21 +0100)]
drm/radeon/kms: optimize CS state checking for r100->r500

The colorbuffer, zbuffer, and texture states are checked only once when
they get changed. This improves performance in the apps which emit
lots of draw packets and few state changes.

This drops performance in glxgears by a 1% or so, but glxgears is not
a benchmark we care about.
The time spent in the kernel when running Torcs dropped from 33% to 23%
and the frame rate is higher, which is a good thing.

r600 might need something like this as well.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agodrm: do not leak kernel addresses via /proc/dri/*/vma
Kees Cook [Sat, 12 Feb 2011 03:29:44 +0000 (19:29 -0800)]
drm: do not leak kernel addresses via /proc/dri/*/vma

In the continuing effort to avoid kernel addresses leaking to unprivileged
users, this patch switches to %pK for /proc/dri/*/vma.

Signed-off-by: Kees Cook <kees.cook@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agodrm/radeon/kms: add connector table for mac g5 9600
Alex Deucher [Mon, 7 Feb 2011 18:15:28 +0000 (13:15 -0500)]
drm/radeon/kms: add connector table for mac g5 9600

PPC Mac cards do not provide connector tables in
their vbios.  Their connector/encoder configurations
must be hardcoded in the driver.

verified by nyef on #radeon

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agoradeon mkregtable: Add missing fclose() calls
Jesper Juhl [Sat, 5 Feb 2011 19:51:53 +0000 (20:51 +0100)]
radeon mkregtable: Add missing fclose() calls

drivers/gpu/drm/radeon/mkregtable.c:parser_auth() almost always remembers
to fclose(file) before returning, but it misses two spots.

This is not really important since the process will exit shortly after and
thus close the file for us, but being explicit prevents static analysis
tools from complaining about leaked memory and missing fclose() calls and
it also seems to be the prefered style of the existing code to explicitly
close the file.

So, here's a patch to add the two missing fclose() calls.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agodrm/radeon/kms: fix interlaced modes on dce4+
Alex Deucher [Sun, 6 Feb 2011 19:23:26 +0000 (14:23 -0500)]
drm/radeon/kms: fix interlaced modes on dce4+

- set scaler table clears the interleave bit, need to
reset it in encoder quirks, this was already done for
pre-dce4.
- remove the interleave settings from set_base() functions
this is now handled in the encoder quirks functions, and
isn't technically part of the display base setup.
- rename evergreen_do_set_base() to dce4_do_set_base() since
it's used on both evergreen and NI asics.

Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=28182

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agodrm/radeon: fix memory debugging since d961db75ce86a84f1f04e91ad1014653ed7d9f46
Dave Airlie [Mon, 7 Feb 2011 02:00:51 +0000 (12:00 +1000)]
drm/radeon: fix memory debugging since d961db75ce86a84f1f04e91ad1014653ed7d9f46

The old code dereferenced a value, the new code just needs to pass
the ptr.

fixes an oops looking at files in debugfs.

cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agoMerge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6
Linus Torvalds [Sun, 13 Feb 2011 15:59:48 +0000 (07:59 -0800)]
Merge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6

* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6:
  devicetree-discuss is moderated for non-subscribers
  MAINTAINERS: Add entry for GPIO subsystem
  dt: add documentation of ARM dt boot interface
  dt: Remove obsolete description of powerpc boot interface
  dt: Move device tree documentation out of powerpc directory
  spi/spi_sh_msiof: fix wrong address calculation, which leads to an Oops

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Sun, 13 Feb 2011 15:58:50 +0000 (07:58 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - add quirk for Ordissimo EVE using a realtek ALC662
  ALSA: hrtimer: remove superfluous tasklet invocation
  ALSA: hrtimer: handle delayed timer interrupts
  ALSA: HDA: Add subwoofer quirk for Acer Aspire 8942G
  ALSA: hda - Don't handle empty patch files
  ALSA: hda - Fix missing CA initialization for HDMI/DP
  ALSA: usbaudio - Enable the E-MU 0204 USB
  ALSA: hda - switch lfe with side in mixer for 4930g
  ASoC: Improve WM8994 digital power sequencing
  ASoC: Create an AIF1ADCDAT signal widget to match AIF2
  asoc: davinci: da830/omap-l137: correct cpu_dai_name
  ASoC: fill in snd_soc_pcm_runtime.card before calling snd_soc_dai_link.init()

13 years agoRevert "pci: use security_capable() when checking capablities during config space...
Linus Torvalds [Sun, 13 Feb 2011 15:50:50 +0000 (07:50 -0800)]
Revert "pci: use security_capable() when checking capablities during config space read"

This reverts commit 47970b1b2aa64464bc0a9543e86361a622ae7c03.

It turns out it breaks several distributions.  Looks like the stricter
selinux checks fail due to selinux policies not being set to allow the
access - breaking X, but also lspci.

So while the change was clearly the RightThing(tm) to do in theory, in
practice we have backwards compatibility issues making it not work.

Reported-by: Dave Young <hidave.darkstar@gmail.com>
Acked-by: David Airlie <airlied@linux.ie>
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Sun, 13 Feb 2011 09:05:30 +0000 (10:05 +0100)]
Merge branch 'fix/asoc' into for-linus

13 years agoMerge branch 'devicetree/merge' into spi/merge
Grant Likely [Sun, 13 Feb 2011 06:53:34 +0000 (23:53 -0700)]
Merge branch 'devicetree/merge' into spi/merge

13 years agodevicetree-discuss is moderated for non-subscribers
Paul Bolle [Sat, 12 Feb 2011 11:33:59 +0000 (12:33 +0100)]
devicetree-discuss is moderated for non-subscribers

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>