Corentin Labbe [Sun, 17 Nov 2019 16:09:53 +0000 (16:09 +0000)]
crypto: amlogic - enable working on big endian kernel
On big endian kernel, the GXL crypto driver does not works.
This patch do the necessary modification to permit it to work on BE
kernel (removing bitfield and adds some cpu_to_le32).
Fixes:
48fe583fe541 ("crypto: amlogic - Add crypto accelerator for amlogic GXL")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Corentin Labbe [Sun, 17 Nov 2019 16:07:45 +0000 (17:07 +0100)]
crypto: sun8i-ce - enable working on big endian
On big endian kernel, the sun8i-ce crypto driver does not works.
This patch do the necessary modification to permit it to work on BE
kernel (setting descriptor entries as __le32 and adding some cpu_to_le32)
Fixes:
06f751b61329 ("crypto: allwinner - Add sun8i-ce Crypto Engine")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Sun, 17 Nov 2019 02:53:24 +0000 (18:53 -0800)]
crypto: mips/chacha - select CRYPTO_SKCIPHER, not CRYPTO_BLKCIPHER
Another instance of CRYPTO_BLKCIPHER made it in just after it was
renamed to CRYPTO_SKCIPHER. Fix it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Sun, 17 Nov 2019 00:43:44 +0000 (08:43 +0800)]
hwrng: ks-sa - Enable COMPILE_TEST
This patch enables COMPILE_TEST on the ks-sa-rng driver.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Chen Wandun [Sat, 16 Nov 2019 06:51:00 +0000 (14:51 +0800)]
crypto: essiv - remove redundant null pointer check before kfree
kfree has taken null pointer check into account. so it is safe to
remove the unnecessary check.
Signed-off-by: Chen Wandun <chenwandun@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tudor Ambarus [Fri, 15 Nov 2019 13:49:09 +0000 (13:49 +0000)]
crypto: atmel-aes - Change data type for "lastc" buffer
In case of in-place decryption, the "lastc" buffer is used to copy
the last ciphertext block before the decryption of the message. It
is later used to update the req->iv of the skcipher_request.
"lastc" variable is not used to interact with the hardware, there
is no restriction to be of type "u32". Change the type of "lastc"
to "u8".
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tudor Ambarus [Fri, 15 Nov 2019 13:49:06 +0000 (13:49 +0000)]
crypto: atmel-tdes - Set the IV after {en,de}crypt
The req->iv of the skcipher_request is expected to contain the
last ciphertext block when the {en,de}crypt operation is done.
In case of in-place decryption, copy the ciphertext in an
intermediate buffer before decryption.
This fixes the following tcrypt tests:
alg: skcipher: atmel-cbc-des encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
00000000: fe dc ba 98 76 54 32 10
alg: skcipher: atmel-cbc-tdes encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
00000000: 7d 33 88 93 0f 93 b2 42
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Corentin Labbe [Thu, 14 Nov 2019 12:58:49 +0000 (13:58 +0100)]
crypto: sun4i-ss - fix big endian issues
When testing BigEndian kernel, the sun4i-ss was failling all crypto
tests.
This patch fix endian issues with it.
Fixes:
6298e948215f ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Corentin Labbe [Thu, 14 Nov 2019 10:58:52 +0000 (11:58 +0100)]
crypto: sun4i-ss - hide the Invalid keylen message
Drop the "Invalid keylen" message to debug level, it adds no value, and
when CRYPTO_EXTRA_TEST is enabled, it floods the console.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Corentin Labbe [Thu, 14 Nov 2019 10:58:13 +0000 (11:58 +0100)]
crypto: sun4i-ss - use crypto_ahash_digestsize
The size of the digest is different between MD5 and SHA1 so instead of
using the higher value (5 words), let's use crypto_ahash_digestsize().
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Corentin Labbe [Thu, 14 Nov 2019 10:49:07 +0000 (11:49 +0100)]
crypto: sun4i-ss - remove dependency on not 64BIT
The driver now compile without warnings on 64bits, we can remove the
!64BIT condition.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Corentin Labbe [Thu, 14 Nov 2019 10:49:06 +0000 (11:49 +0100)]
crypto: sun4i-ss - Fix 64-bit size_t warnings on sun4i-ss-hash.c
If you try to compile this driver on a 64-bit platform then you
will get warnings because it mixes size_t with unsigned int which
only works on 32-bit.
This patch fixes all of the warnings on sun4i-ss-hash.c.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Zaibo Xu [Wed, 13 Nov 2019 11:11:08 +0000 (19:11 +0800)]
MAINTAINERS: Add maintainer for HiSilicon SEC V2 driver
Here adds maintainer information for security engine driver.
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Zaibo Xu [Wed, 13 Nov 2019 11:11:07 +0000 (19:11 +0800)]
crypto: hisilicon - add DebugFS for HiSilicon SEC
The HiSilicon SEC engine driver uses DebugFS
to provide main debug information for user space.
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Longfang Liu [Wed, 13 Nov 2019 11:11:06 +0000 (19:11 +0800)]
Documentation: add DebugFS doc for HiSilicon SEC
This Documentation is for HiSilicon SEC DebugFS.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Kai Ye <yekai13@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Zaibo Xu [Wed, 13 Nov 2019 11:11:05 +0000 (19:11 +0800)]
crypto: hisilicon - add SRIOV for HiSilicon SEC
HiSilicon SEC engine supports PCI SRIOV. This patch enable this feature.
User can enable VFs and pass through them to VM, same SEC driver can work
in VM to provide skcipher algorithms.
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Zaibo Xu [Wed, 13 Nov 2019 11:11:04 +0000 (19:11 +0800)]
crypto: hisilicon - add HiSilicon SEC V2 driver
SEC driver provides PCIe hardware device initiation with
AES, SM4, and 3DES skcipher algorithms registered to Crypto.
It uses Hisilicon QM as interface to CPU.
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
YueHaibing [Wed, 13 Nov 2019 09:55:50 +0000 (17:55 +0800)]
crypto: atmel - Fix build error of CRYPTO_AUTHENC
If CRYPTO_DEV_ATMEL_AUTHENC is m, CRYPTO_DEV_ATMEL_SHA is m,
but CRYPTO_DEV_ATMEL_AES is y, building will fail:
drivers/crypto/atmel-aes.o: In function `atmel_aes_authenc_init_tfm':
atmel-aes.c:(.text+0x670): undefined reference to `atmel_sha_authenc_get_reqsize'
atmel-aes.c:(.text+0x67a): undefined reference to `atmel_sha_authenc_spawn'
drivers/crypto/atmel-aes.o: In function `atmel_aes_authenc_setkey':
atmel-aes.c:(.text+0x7e5): undefined reference to `atmel_sha_authenc_setkey'
Make CRYPTO_DEV_ATMEL_AUTHENC depend on CRYPTO_DEV_ATMEL_AES,
and select CRYPTO_DEV_ATMEL_SHA and CRYPTO_AUTHENC for it under there.
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes:
89a82ef87e01 ("crypto: atmel-authenc - add support to...")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Peter Ujfalusi [Wed, 13 Nov 2019 09:09:47 +0000 (11:09 +0200)]
crypto: qce/dma - Use dma_request_chan() directly for channel request
dma_request_slave_channel_reason() is:
#define dma_request_slave_channel_reason(dev, name) \
dma_request_chan(dev, name)
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Brijesh Singh [Tue, 12 Nov 2019 19:58:34 +0000 (13:58 -0600)]
crypto: ccp - add SEV command privilege separation
Currently, there is no privilege separation of the SEV command; you can
run them all or none of them. This is less than ideal because it means
that a compromise of the code which launches VMs could make permanent
change to the SEV certifcate chain which will affect others.
These commands are required to attest the VM environment:
- SEV_PDH_CERT_EXPORT
- SEV_PLATFORM_STATUS
- SEV_GET_{ID,ID2}
These commands manage the SEV certificate chain:
- SEV_PEK_CERR_IMPORT
- SEV_FACTORY_RESET
- SEV_PEK_GEN
- SEV_PEK_CSR
- SEV_PDH_GEN
Lets add the CAP_SYS_ADMIN check for the group of the commands which alters
the SEV certificate chain to provide some level of privilege separation.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Gary Hook <gary.hook@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Tested-by: David Rientjes <rientjes@google.com>
Co-developed-by: David Rientjes <rientjes@google.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
David Sterba [Tue, 12 Nov 2019 10:20:30 +0000 (11:20 +0100)]
crypto: blake2b - rename tfm context and _setkey callback
The TFM context can be renamed to a more appropriate name and the local
varaibles as well, using 'tctx' which seems to be more common than
'mctx'.
The _setkey callback was the last one without the blake2b_ prefix,
rename that too.
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
David Sterba [Tue, 12 Nov 2019 10:20:29 +0000 (11:20 +0100)]
crypto: blake2b - merge _update to api callback
Now that there's only one call to blake2b_update, we can merge it to the
callback and simplify. The empty input check is split and the rest of
code un-indented.
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
David Sterba [Tue, 12 Nov 2019 10:20:28 +0000 (11:20 +0100)]
crypto: blake2b - open code set last block helper
The helper is trival and called once, inlining makes things simpler.
There's a comment to tie it back to the idea behind the code.
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
David Sterba [Tue, 12 Nov 2019 10:20:27 +0000 (11:20 +0100)]
crypto: blake2b - delete unused structs or members
All the code for param block has been inlined, last_node and outlen from
the state are not used or have become redundant due to other code.
Remove it.
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
David Sterba [Tue, 12 Nov 2019 10:20:26 +0000 (11:20 +0100)]
crypto: blake2b - simplify key init
The keyed init writes the key bytes to the input buffer and does an
update. We can do that in two ways: fill the buffer and update
immediatelly. This is what current blake2b_init_key does. Any other
following _update or _final will continue from the updated state.
The other way is to write the key and set the number of bytes to process
at the next _update or _final, lazy evaluation. Which leads to the the
simplified code in this patch.
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
David Sterba [Tue, 12 Nov 2019 10:20:25 +0000 (11:20 +0100)]
crypto: blake2b - merge blake2 init to api callback
The call chain from blake2b_init can be simplified because the param
block is effectively zeros, besides the key.
- blake2b_init0 zeroes state and sets IV
- blake2b_init sets up param block with defaults (key and some 1s)
- init with key, write it to the input buffer and recalculate state
So the compact way is to zero out the state and initialize index 0 of
the state directly with the non-zero values and the key.
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
David Sterba [Tue, 12 Nov 2019 10:20:24 +0000 (11:20 +0100)]
crypto: blake2b - merge _final implementation to callback
blake2b_final is called only once, merge it to the crypto API callback
and simplify. This avoids the temporary buffer and swaps the bytes of
internal buffer.
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
YueHaibing [Tue, 12 Nov 2019 07:23:14 +0000 (07:23 +0000)]
crypto: sun8i-ce - Fix memdup.cocci warnings
Use kmemdup rather than duplicating its implementation
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Tue, 12 Nov 2019 02:38:34 +0000 (10:38 +0800)]
crypto: sun4i-ss - Fix 64-bit size_t warnings
If you try to compile this driver on a 64-bit platform then you
will get warnings because it mixes size_t with unsigned int which
only works on 32-bit.
This patch fixes all of the warnings.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:54 +0000 (18:09 +0100)]
crypto: ccree - update a stale reference to ablkcipher
The ccree driver does not use the ablkcipher interface but contains
a rudimentary reference to it in the naming of an unrelated macro.
Let's rename it to avoid confusion.
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:53 +0000 (18:09 +0100)]
crypto: ablkcipher - remove deprecated and unused ablkcipher support
Now that all users of the deprecated ablkcipher interface have been
moved to the skcipher interface, ablkcipher is no longer used and
can be removed.
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:52 +0000 (18:09 +0100)]
crypto: nx - remove stale comment referring to the blkcipher walk API
These drivers do not use either the deprecated blkcipher or the current
skcipher walk API, so this comment must refer to a previous state of the
driver that no longer exists. So drop the comments.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:51 +0000 (18:09 +0100)]
crypto: marvell/cesa - rename blkcipher to skcipher
The driver specific types contain some rudimentary references to the
blkcipher API, which is deprecated and will be removed. To avoid confusion,
rename these to skcipher. This is a cosmetic change only, as the code does
not actually use the blkcipher API.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:50 +0000 (18:09 +0100)]
crypto: qat - switch to skcipher API
Commit
7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:49 +0000 (18:09 +0100)]
crypto: talitos - switch to skcipher API
Commit
7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:48 +0000 (18:09 +0100)]
crypto: rockchip - switch to skcipher API
Commit
7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:47 +0000 (18:09 +0100)]
crypto: niagara2 - switch to skcipher API
Commit
7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:46 +0000 (18:09 +0100)]
crypto: stm32 - switch to skcipher API
Commit
7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:45 +0000 (18:09 +0100)]
crypto: qce - switch to skcipher API
Commit
7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:44 +0000 (18:09 +0100)]
crypto: picoxcell - switch to skcipher API
Commit
7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Cc: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:43 +0000 (18:09 +0100)]
crypto: sahara - switch to skcipher API
Commit
7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:42 +0000 (18:09 +0100)]
crypto: mediatek - switch to skcipher API
Commit
7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:41 +0000 (18:09 +0100)]
crypto: mxs - switch to skcipher API
Commit
7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Tested-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:40 +0000 (18:09 +0100)]
crypto: ixp4xx - switch to skcipher API
Commit
7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:39 +0000 (18:09 +0100)]
crypto: hifn - switch to skcipher API
Commit
7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:38 +0000 (18:09 +0100)]
crypto: chelsio - switch to skcipher API
Commit
7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Cc: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:37 +0000 (18:09 +0100)]
crypto: cavium/cpt - switch to skcipher API
Commit
7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:36 +0000 (18:09 +0100)]
crypto: nitrox - remove cra_type reference to ablkcipher
Setting the cra_type field is not necessary for skciphers, and ablkcipher
will be removed, so drop the assignment from the nitrox driver.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:35 +0000 (18:09 +0100)]
crypto: bcm-spu - switch to skcipher API
Commit
7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:34 +0000 (18:09 +0100)]
crypto: atmel-tdes - switch to skcipher API
Commit
7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Tested-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:33 +0000 (18:09 +0100)]
crypto: atmel-aes - switch to skcipher API
Commit
7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Tested-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:32 +0000 (18:09 +0100)]
crypto: s5p - switch to skcipher API
Commit
7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Reviewed-by: Kamil Konieczny <k.konieczny@samsung.com>
Tested-by: Kamil Konieczny <k.konieczny@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:31 +0000 (18:09 +0100)]
crypto: ux500 - switch to skcipher API
Commit
7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:30 +0000 (18:09 +0100)]
crypto: omap - switch to skcipher API
Commit
7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Reviewed-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:29 +0000 (18:09 +0100)]
crypto: ccp - switch from ablkcipher to skcipher
Commit
7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Reviewed-by: Gary R Hook <gary.hook@amd.com>
Tested-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:28 +0000 (18:09 +0100)]
crypto: virtio - switch to skcipher API
Commit
7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:27 +0000 (18:09 +0100)]
crypto: virtio - deal with unsupported input sizes
Return -EINVAL for input sizes that are not a multiple of the AES
block size, since they are not supported by our CBC chaining mode.
While at it, remove the pr_err() that reports unsupported key sizes
being used: we shouldn't spam the kernel log with that.
Fixes:
dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sat, 9 Nov 2019 17:09:26 +0000 (18:09 +0100)]
crypto: virtio - implement missing support for output IVs
In order to allow for CBC to be chained, which is something that the
CTS template relies upon, implementations of CBC need to pass the
IV to be used for subsequent invocations via the IV buffer. This was
not implemented yet for virtio-crypto so implement it now.
Fixes:
dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Corentin Labbe [Fri, 8 Nov 2019 15:42:13 +0000 (15:42 +0000)]
crypto: tcrypt - constify check alg list
this patchs constify the alg list because this list is never modified.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:40 +0000 (13:22 +0100)]
crypto: lib/chacha20poly1305 - reimplement crypt_from_sg() routine
Reimplement the library routines to perform chacha20poly1305 en/decryption
on scatterlists, without [ab]using the [deprecated] blkcipher interface,
which is rather heavyweight and does things we don't really need.
Instead, we use the sg_miter API in a novel and clever way, to iterate
over the scatterlist in-place (i.e., source == destination, which is the
only way this library is expected to be used). That way, we don't have to
iterate over two scatterlists in parallel.
Another optimization is that, instead of relying on the blkcipher walker
to present the input in suitable chunks, we recognize that ChaCha is a
streamcipher, and so we can simply deal with partial blocks by keeping a
block of cipherstream on the stack and use crypto_xor() to mix it with
the in/output.
Finally, we omit the scatterwalk_and_copy() call if the last element of
the scatterlist covers the MAC as well (which is the common case),
avoiding the need to walk the scatterlist and kmap() the page twice.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:39 +0000 (13:22 +0100)]
crypto: chacha20poly1305 - import construction and selftest from Zinc
This incorporates the chacha20poly1305 from the Zinc library, retaining
the library interface, but replacing the implementation with calls into
the code that already existed in the kernel's crypto API.
Note that this library API does not implement RFC7539 fully, given that
it is limited to 64-bit nonces. (The 96-bit nonce version that was part
of the selftest only has been removed, along with the 96-bit nonce test
vectors that only tested the selftest but not the actual library itself)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Jason A. Donenfeld [Fri, 8 Nov 2019 12:22:38 +0000 (13:22 +0100)]
crypto: arm/curve25519 - wire up NEON implementation
This ports the SUPERCOP implementation for usage in kernel space. In
addition to the usual header, macro, and style changes required for
kernel space, it makes a few small changes to the code:
- The stack alignment is relaxed to 16 bytes.
- Superfluous mov statements have been removed.
- ldr for constants has been replaced with movw.
- ldreq has been replaced with moveq.
- The str epilogue has been made more idiomatic.
- SIMD registers are not pushed and popped at the beginning and end.
- The prologue and epilogue have been made idiomatic.
- A hole has been removed from the stack, saving 32 bytes.
- We write-back the base register whenever possible for vld1.8.
- Some multiplications have been reordered for better A7 performance.
There are more opportunities for cleanup, since this code is from qhasm,
which doesn't always do the most opportune thing. But even prior to
extensive hand optimizations, this code delivers significant performance
improvements (given in get_cycles() per call):
----------- -------------
| generic C | this commit |
------------ ----------- -------------
| Cortex-A7 | 49136 | 22395 |
------------ ----------- -------------
| Cortex-A17 | 17326 | 4983 |
------------ ----------- -------------
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
[ardb: - move to arch/arm/crypto
- wire into lib/crypto framework
- implement crypto API KPP hooks ]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Jason A. Donenfeld [Fri, 8 Nov 2019 12:22:37 +0000 (13:22 +0100)]
crypto: arm/curve25519 - import Bernstein and Schwabe's Curve25519 ARM implementation
This comes from Dan Bernstein and Peter Schwabe's public domain NEON
code, and is included here in raw form so that subsequent commits that
fix these up for the kernel can see how it has changed. This code does
have some entirely cosmetic formatting differences, adding indentation
and so forth, so that when we actually port it for use in the kernel in
the subsequent commit, it's obvious what's changed in the process.
This code originates from SUPERCOP
20180818, available at
<https://bench.cr.yp.to/supercop.html>.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Jason A. Donenfeld [Fri, 8 Nov 2019 12:22:36 +0000 (13:22 +0100)]
crypto: curve25519 - x86_64 library and KPP implementations
This implementation is the fastest available x86_64 implementation, and
unlike Sandy2x, it doesn't requie use of the floating point registers at
all. Instead it makes use of BMI2 and ADX, available on recent
microarchitectures. The implementation was written by Armando
Faz-Hernández with contributions (upstream) from Samuel Neves and me,
in addition to further changes in the kernel implementation from us.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Samuel Neves <sneves@dei.uc.pt>
Co-developed-by: Samuel Neves <sneves@dei.uc.pt>
[ardb: - move to arch/x86/crypto
- wire into lib/crypto framework
- implement crypto API KPP hooks ]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:35 +0000 (13:22 +0100)]
crypto: lib/curve25519 - work around Clang stack spilling issue
Arnd reports that the 32-bit generic library code for Curve25119 ends
up using an excessive amount of stack space when built with Clang:
lib/crypto/curve25519-fiat32.c:756:6: error: stack frame size
of 1384 bytes in function 'curve25519_generic'
[-Werror,-Wframe-larger-than=]
Let's give some hints to the compiler regarding which routines should
not be inlined, to prevent it from running out of registers and spilling
to the stack. The resulting code performs identically under both GCC
and Clang, and makes the warning go away.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:34 +0000 (13:22 +0100)]
crypto: curve25519 - implement generic KPP driver
Expose the generic Curve25519 library via the crypto API KPP interface.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:33 +0000 (13:22 +0100)]
crypto: curve25519 - add kpp selftest
In preparation of introducing KPP implementations of Curve25519, import
the set of test cases proposed by the Zinc patch set, but converted to
the KPP format.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Jason A. Donenfeld [Fri, 8 Nov 2019 12:22:32 +0000 (13:22 +0100)]
crypto: curve25519 - generic C library implementations
This contains two formally verified C implementations of the Curve25519
scalar multiplication function, one for 32-bit systems, and one for
64-bit systems whose compiler supports efficient 128-bit integer types.
Not only are these implementations formally verified, but they are also
the fastest available C implementations. They have been modified to be
friendly to kernel space and to be generally less horrendous looking,
but still an effort has been made to retain their formally verified
characteristic, and so the C might look slightly unidiomatic.
The 64-bit version comes from HACL*: https://github.com/project-everest/hacl-star
The 32-bit version comes from Fiat: https://github.com/mit-plv/fiat-crypto
Information: https://cr.yp.to/ecdh.html
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
[ardb: - move from lib/zinc to lib/crypto
- replace .c #includes with Kconfig based object selection
- drop simd handling and simplify support for per-arch versions ]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Jason A. Donenfeld [Fri, 8 Nov 2019 12:22:31 +0000 (13:22 +0100)]
crypto: blake2s - x86_64 SIMD implementation
These implementations from Samuel Neves support AVX and AVX-512VL.
Originally this used AVX-512F, but Skylake thermal throttling made
AVX-512VL more attractive and possible to do with negligable difference.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Samuel Neves <sneves@dei.uc.pt>
Co-developed-by: Samuel Neves <sneves@dei.uc.pt>
[ardb: move to arch/x86/crypto, wire into lib/crypto framework]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:30 +0000 (13:22 +0100)]
crypto: blake2s - implement generic shash driver
Wire up our newly added Blake2s implementation via the shash API.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:29 +0000 (13:22 +0100)]
crypto: testmgr - add test cases for Blake2s
As suggested by Eric for the Blake2b implementation contributed by
David, introduce a set of test vectors for Blake2s covering different
digest and key sizes.
blake2s-128 blake2s-160 blake2s-224 blake2s-256
---------------------------------------------------
len=0 | klen=0 klen=1 klen=16 klen=32
len=1 | klen=16 klen=32 klen=0 klen=1
len=7 | klen=32 klen=0 klen=1 klen=16
len=15 | klen=1 klen=16 klen=32 klen=0
len=64 | klen=0 klen=1 klen=16 klen=32
len=247 | klen=16 klen=32 klen=0 klen=1
len=256 | klen=32 klen=0 klen=1 klen=16
Cc: David Sterba <dsterba@suse.com>
Cc: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Jason A. Donenfeld [Fri, 8 Nov 2019 12:22:28 +0000 (13:22 +0100)]
crypto: blake2s - generic C library implementation and selftest
The C implementation was originally based on Samuel Neves' public
domain reference implementation but has since been heavily modified
for the kernel. We're able to do compile-time optimizations by moving
some scaffolding around the final function into the header file.
Information: https://blake2.net/
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Samuel Neves <sneves@dei.uc.pt>
Co-developed-by: Samuel Neves <sneves@dei.uc.pt>
[ardb: - move from lib/zinc to lib/crypto
- remove simd handling
- rewrote selftest for better coverage
- use fixed digest length for blake2s_hmac() and rename to
blake2s256_hmac() ]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:27 +0000 (13:22 +0100)]
int128: move __uint128_t compiler test to Kconfig
In order to use 128-bit integer arithmetic in C code, the architecture
needs to have declared support for it by setting ARCH_SUPPORTS_INT128,
and it requires a version of the toolchain that supports this at build
time. This is why all existing tests for ARCH_SUPPORTS_INT128 also test
whether __SIZEOF_INT128__ is defined, since this is only the case for
compilers that can support 128-bit integers.
Let's fold this additional test into the Kconfig declaration of
ARCH_SUPPORTS_INT128 so that we can also use the symbol in Makefiles,
e.g., to decide whether a certain object needs to be included in the
first place.
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:26 +0000 (13:22 +0100)]
crypto: mips/poly1305 - incorporate OpenSSL/CRYPTOGAMS optimized implementation
This is a straight import of the OpenSSL/CRYPTOGAMS Poly1305 implementation for
MIPS authored by Andy Polyakov, a prior 64-bit only version of which has been
contributed by him to the OpenSSL project. The file 'poly1305-mips.pl' is taken
straight from this upstream GitHub repository [0] at commit
d22ade312a7af958ec955620b0d241cf42c37feb, and already contains all the changes
required to build it as part of a Linux kernel module.
[0] https://github.com/dot-asm/cryptogams
Co-developed-by: Andy Polyakov <appro@cryptogams.org>
Signed-off-by: Andy Polyakov <appro@cryptogams.org>
Co-developed-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:25 +0000 (13:22 +0100)]
crypto: arm/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation
This is a straight import of the OpenSSL/CRYPTOGAMS Poly1305 implementation
for NEON authored by Andy Polyakov, and contributed by him to the OpenSSL
project. The file 'poly1305-armv4.pl' is taken straight from this upstream
GitHub repository [0] at commit
ec55a08dc0244ce570c4fc7cade330c60798952f,
and already contains all the changes required to build it as part of a
Linux kernel module.
[0] https://github.com/dot-asm/cryptogams
Co-developed-by: Andy Polyakov <appro@cryptogams.org>
Signed-off-by: Andy Polyakov <appro@cryptogams.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:24 +0000 (13:22 +0100)]
crypto: arm64/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation
This is a straight import of the OpenSSL/CRYPTOGAMS Poly1305 implementation
for NEON authored by Andy Polyakov, and contributed by him to the OpenSSL
project. The file 'poly1305-armv8.pl' is taken straight from this upstream
GitHub repository [0] at commit
ec55a08dc0244ce570c4fc7cade330c60798952f,
and already contains all the changes required to build it as part of a
Linux kernel module.
[0] https://github.com/dot-asm/cryptogams
Co-developed-by: Andy Polyakov <appro@cryptogams.org>
Signed-off-by: Andy Polyakov <appro@cryptogams.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:23 +0000 (13:22 +0100)]
crypto: x86/poly1305 - expose existing driver as poly1305 library
Implement the arch init/update/final Poly1305 library routines in the
accelerated SIMD driver for x86 so they are accessible to users of
the Poly1305 library interface as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:22 +0000 (13:22 +0100)]
crypto: x86/poly1305 - depend on generic library not generic shash
Remove the dependency on the generic Poly1305 driver. Instead, depend
on the generic library so that we only reuse code without pulling in
the generic skcipher implementation as well.
While at it, remove the logic that prefers the non-SIMD path for short
inputs - this is no longer necessary after recent FPU handling changes
on x86.
Since this removes the last remaining user of the routines exported
by the generic shash driver, unexport them and make them static.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:21 +0000 (13:22 +0100)]
crypto: poly1305 - expose init/update/final library interface
Expose the existing generic Poly1305 code via a init/update/final
library interface so that callers are not required to go through
the crypto API's shash abstraction to access it. At the same time,
make some preparations so that the library implementation can be
superseded by an accelerated arch-specific version in the future.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:20 +0000 (13:22 +0100)]
crypto: x86/poly1305 - unify Poly1305 state struct with generic code
In preparation of exposing a Poly1305 library interface directly from
the accelerated x86 driver, align the state descriptor of the x86 code
with the one used by the generic driver. This is needed to make the
library interface unified between all implementations.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:19 +0000 (13:22 +0100)]
crypto: poly1305 - move core routines into a separate library
Move the core Poly1305 routines shared between the generic Poly1305
shash driver and the Adiantum and NHPoly1305 drivers into a separate
library so that using just this pieces does not pull in the crypto
API pieces of the generic Poly1305 routine.
In a subsequent patch, we will augment this generic library with
init/update/final routines so that Poyl1305 algorithm can be used
directly without the need for using the crypto API's shash abstraction.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:18 +0000 (13:22 +0100)]
crypto: chacha - unexport chacha_generic routines
Now that all users of generic ChaCha code have moved to the core library,
there is no longer a need for the generic ChaCha skcpiher driver to
export parts of it implementation for reuse by other drivers. So drop
the exports, and make the symbols static.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:17 +0000 (13:22 +0100)]
crypto: mips/chacha - wire up accelerated 32r2 code from Zinc
This integrates the accelerated MIPS 32r2 implementation of ChaCha
into both the API and library interfaces of the kernel crypto stack.
The significance of this is that, in addition to becoming available
as an accelerated library implementation, it can also be used by
existing crypto API code such as Adiantum (for block encryption on
ultra low performance cores) or IPsec using chacha20poly1305. These
are use cases that have already opted into using the abstract crypto
API. In order to support Adiantum, the core assembler routine has
been adapted to take the round count as a function argument rather
than hardcoding it to 20.
Co-developed-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Jason A. Donenfeld [Fri, 8 Nov 2019 12:22:16 +0000 (13:22 +0100)]
crypto: mips/chacha - import 32r2 ChaCha code from Zinc
This imports the accelerated MIPS 32r2 ChaCha20 implementation from the
Zinc patch set.
Co-developed-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:15 +0000 (13:22 +0100)]
crypto: arm/chacha - expose ARM ChaCha routine as library function
Expose the accelerated NEON ChaCha routine directly as a symbol
export so that users of the ChaCha library API can use it directly.
Given that calls into the library API will always go through the
routines in this module if it is enabled, switch to static keys
to select the optimal implementation available (which may be none
at all, in which case we defer to the generic implementation for
all invocations).
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:14 +0000 (13:22 +0100)]
crypto: arm/chacha - remove dependency on generic ChaCha driver
Instead of falling back to the generic ChaCha skcipher driver for
non-SIMD cases, use a fast scalar implementation for ARM authored
by Eric Biggers. This removes the module dependency on chacha-generic
altogether, which also simplifies things when we expose the ChaCha
library interface from this module.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:13 +0000 (13:22 +0100)]
crypto: arm/chacha - import Eric Biggers's scalar accelerated ChaCha code
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:12 +0000 (13:22 +0100)]
crypto: arm64/chacha - expose arm64 ChaCha routine as library function
Expose the accelerated NEON ChaCha routine directly as a symbol
export so that users of the ChaCha library API can use it directly.
Given that calls into the library API will always go through the
routines in this module if it is enabled, switch to static keys
to select the optimal implementation available (which may be none
at all, in which case we defer to the generic implementation for
all invocations).
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:11 +0000 (13:22 +0100)]
crypto: arm64/chacha - depend on generic chacha library instead of crypto driver
Depend on the generic ChaCha library routines instead of pulling in the
generic ChaCha skcipher driver, which is more than we need, and makes
managing the dependencies between the generic library, generic driver,
accelerated library and driver more complicated.
While at it, drop the logic to prefer the scalar code on short inputs.
Turning the NEON on and off is cheap these days, and one major use case
for ChaCha20 is ChaCha20-Poly1305, which is guaranteed to hit the scalar
path upon every invocation (when doing the Poly1305 nonce generation)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:10 +0000 (13:22 +0100)]
crypto: x86/chacha - expose SIMD ChaCha routine as library function
Wire the existing x86 SIMD ChaCha code into the new ChaCha library
interface, so that users of the library interface will get the
accelerated version when available.
Given that calls into the library API will always go through the
routines in this module if it is enabled, switch to static keys
to select the optimal implementation available (which may be none
at all, in which case we defer to the generic implementation for
all invocations).
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:09 +0000 (13:22 +0100)]
crypto: x86/chacha - depend on generic chacha library instead of crypto driver
In preparation of extending the x86 ChaCha driver to also expose the ChaCha
library interface, drop the dependency on the chacha_generic crypto driver
as a non-SIMD fallback, and depend on the generic ChaCha library directly.
This way, we only pull in the code we actually need, without registering
a set of ChaCha skciphers that we will never use.
Since turning the FPU on and off is cheap these days, simplify the SIMD
routine by dropping the per-page yield, which makes for a cleaner switch
to the library API as well. This also allows use to invoke the skcipher
walk routines in non-atomic mode.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:08 +0000 (13:22 +0100)]
crypto: chacha - move existing library code into lib/crypto
Currently, our generic ChaCha implementation consists of a permute
function in lib/chacha.c that operates on the 64-byte ChaCha state
directly [and which is always included into the core kernel since it
is used by the /dev/random driver], and the crypto API plumbing to
expose it as a skcipher.
In order to support in-kernel users that need the ChaCha streamcipher
but have no need [or tolerance] for going through the abstractions of
the crypto API, let's expose the streamcipher bits via a library API
as well, in a way that permits the implementation to be superseded by
an architecture specific one if provided.
So move the streamcipher code into a separate module in lib/crypto,
and expose the init() and crypt() routines to users of the library.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 8 Nov 2019 12:22:07 +0000 (13:22 +0100)]
crypto: lib - tidy up lib/crypto Kconfig and Makefile
In preparation of introducing a set of crypto library interfaces, tidy
up the Makefile and split off the Kconfig symbols into a separate file.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Fri, 8 Nov 2019 10:41:58 +0000 (18:41 +0800)]
crypto: aead - Split out geniv into its own module
If aead is built as a module along with cryptomgr, it creates a
dependency loop due to the dependency chain aead => crypto_null =>
cryptomgr => aead.
This is due to the presence of the AEAD geniv code. This code is
not really part of the AEAD API but simply support code for IV
generators such as seqiv. This patch moves the geniv code into
its own module thus breaking the dependency loop.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Fri, 8 Nov 2019 10:26:30 +0000 (18:26 +0800)]
crypto: api - Add softdep on cryptomgr
The crypto API requires cryptomgr to be present for probing to work
so we need a softdep to ensure that cryptomgr is added to the
initramfs.
This was usually not a problem because until very recently it was
not practical to build crypto API as module but with the recent
work to eliminate direct AES users this is now possible.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Corentin Labbe [Fri, 8 Nov 2019 10:13:06 +0000 (10:13 +0000)]
MAINTAINERS: add linux-amlogic list for amlogic crypto
The linux-amlogic mailing list need to be in copy of all patch for the amlogic crypto.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Corentin Labbe [Fri, 8 Nov 2019 09:45:17 +0000 (09:45 +0000)]
crypto: amlogic - fix two resources leak
This patch fixes two resources leak that occur on error path.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1487403 ("RESOURCE_LEAK")
Addresses-Coverity-ID: 1487401 ("Resource leaks")
Fixes:
48fe583fe541 ("crypto: amlogic - Add crypto accelerator for amlogic GXL")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pascal van Leeuwen [Fri, 8 Nov 2019 09:00:21 +0000 (10:00 +0100)]
crypto: inside-secure - Fixed authenc w/ (3)DES fails on Macchiatobin
Fixed 2 copy-paste mistakes in the commit mentioned below that caused
authenc w/ (3)DES to consistently fail on Macchiatobin (but strangely
work fine on x86+FPGA??).
Now fully tested on both platforms.
Fixes:
13a1bb93f7b1c9 ("crypto: inside-secure - Fixed warnings...")
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Greg Kroah-Hartman [Thu, 7 Nov 2019 08:52:00 +0000 (09:52 +0100)]
crypto: hisilicon - no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hao Fang [Thu, 7 Nov 2019 03:48:29 +0000 (11:48 +0800)]
crypto: hisilicon - add vfs_num module param for zip
Currently the VF can be enabled only through sysfs interface
after module loaded, but this also needs to be done when the
module loaded in some scenarios.
This patch adds module param vfs_num, adds hisi_zip_sriov_enable()
in probe, and also adjusts the position of probe.
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>