Yishai Hadas [Tue, 23 Jul 2019 06:57:26 +0000 (09:57 +0300)]
IB/mlx5: Use direct mkey destroy command upon UMR unreg failure
commit
afd1417404fba6dbfa6c0a8e5763bd348da682e4 upstream.
Use a direct firmware command to destroy the mkey in case the unreg UMR
operation has failed.
This prevents a case that a mkey will leak out from the cache post a
failure to be destroyed by a UMR WR.
In case the MR cache limit didn't reach a call to add another entry to the
cache instead of the destroyed one is issued.
In addition, replaced a warn message to WARN_ON() as this flow is fatal
and can't happen unless some bug around.
Link: https://lore.kernel.org/r/20190723065733.4899-4-leon@kernel.org
Cc: <stable@vger.kernel.org> # 4.10
Fixes:
49780d42dfc9 ("IB/mlx5: Expose MR cache for mlx5_ib")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yishai Hadas [Tue, 23 Jul 2019 06:57:25 +0000 (09:57 +0300)]
IB/mlx5: Fix unreg_umr to ignore the mkey state
commit
6a053953739d23694474a5f9c81d1a30093da81a upstream.
Fix unreg_umr to ignore the mkey state and do not fail if was freed. This
prevents a case that a user space application already changed the mkey
state to free and then the UMR operation will fail leaving the mkey in an
inappropriate state.
Link: https://lore.kernel.org/r/20190723065733.4899-3-leon@kernel.org
Cc: <stable@vger.kernel.org> # 3.19
Fixes:
968e78dd9644 ("IB/mlx5: Enhance UMR support to allow partial page table update")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Juergen Gross [Fri, 14 Jun 2019 05:46:02 +0000 (07:46 +0200)]
xen/swiotlb: fix condition for calling xen_destroy_contiguous_region()
commit
50f6393f9654c561df4cdcf8e6cfba7260143601 upstream.
The condition in xen_swiotlb_free_coherent() for deciding whether to
call xen_destroy_contiguous_region() is wrong: in case the region to
be freed is not contiguous calling xen_destroy_contiguous_region() is
the wrong thing to do: it would result in inconsistent mappings of
multiple PFNs to the same MFN. This will lead to various strange
crashes or data corruption.
Instead of calling xen_destroy_contiguous_region() in that case a
warning should be issued as that situation should never occur.
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Munehisa Kamata [Wed, 31 Jul 2019 12:13:10 +0000 (20:13 +0800)]
nbd: replace kill_bdev() with __invalidate_device() again
commit
2b5c8f0063e4b263cf2de82029798183cf85c320 upstream.
Commit
abbbdf12497d ("replace kill_bdev() with __invalidate_device()")
once did this, but
29eaadc03649 ("nbd: stop using the bdev everywhere")
resurrected kill_bdev() and it has been there since then. So buffer_head
mappings still get killed on a server disconnection, and we can still
hit the BUG_ON on a filesystem on the top of the nbd device.
EXT4-fs (nbd0): mounted filesystem with ordered data mode. Opts: (null)
block nbd0: Receive control failed (result -32)
block nbd0: shutting down sockets
print_req_error: I/O error, dev nbd0, sector 66264 flags 3000
EXT4-fs warning (device nbd0): htree_dirblock_to_tree:979: inode #2: lblock 0: comm ls: error -5 reading directory block
print_req_error: I/O error, dev nbd0, sector 2264 flags 3000
EXT4-fs error (device nbd0): __ext4_get_inode_loc:4690: inode #2: block 283: comm ls: unable to read itable block
EXT4-fs error (device nbd0) in ext4_reserve_inode_write:5894: IO failure
------------[ cut here ]------------
kernel BUG at fs/buffer.c:3057!
invalid opcode: 0000 [#1] SMP PTI
CPU: 7 PID: 40045 Comm: jbd2/nbd0-8 Not tainted 5.1.0-rc3+ #4
Hardware name: Amazon EC2 m5.12xlarge/, BIOS 1.0 10/16/2017
RIP: 0010:submit_bh_wbc+0x18b/0x190
...
Call Trace:
jbd2_write_superblock+0xf1/0x230 [jbd2]
? account_entity_enqueue+0xc5/0xf0
jbd2_journal_update_sb_log_tail+0x94/0xe0 [jbd2]
jbd2_journal_commit_transaction+0x12f/0x1d20 [jbd2]
? __switch_to_asm+0x40/0x70
...
? lock_timer_base+0x67/0x80
kjournald2+0x121/0x360 [jbd2]
? remove_wait_queue+0x60/0x60
kthread+0xf8/0x130
? commit_timeout+0x10/0x10 [jbd2]
? kthread_bind+0x10/0x10
ret_from_fork+0x35/0x40
With __invalidate_device(), I no longer hit the BUG_ON with sync or
unmount on the disconnected device.
Fixes:
29eaadc03649 ("nbd: stop using the bdev everywhere")
Cc: linux-block@vger.kernel.org
Cc: Ratna Manoj Bolla <manoj.br@gmail.com>
Cc: nbd@other.debian.org
Cc: stable@vger.kernel.org
Cc: David Woodhouse <dwmw@amazon.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Munehisa Kamata <kamatam@amazon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Tue, 30 Jul 2019 14:40:20 +0000 (15:40 +0100)]
arm64: cpufeature: Fix feature comparison for CTR_EL0.{CWG,ERG}
commit
147b9635e6347104b91f48ca9dca61eb0fbf2a54 upstream.
If CTR_EL0.{CWG,ERG} are 0b0000 then they must be interpreted to have
their architecturally maximum values, which defeats the use of
FTR_HIGHER_SAFE when sanitising CPU ID registers on heterogeneous
machines.
Introduce FTR_HIGHER_OR_ZERO_SAFE so that these fields effectively
saturate at zero.
Fixes:
3c739b571084 ("arm64: Keep track of CPU feature registers")
Cc: <stable@vger.kernel.org> # 4.4.x-
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Mon, 29 Jul 2019 10:06:17 +0000 (11:06 +0100)]
arm64: compat: Allow single-byte watchpoints on all addresses
commit
849adec41203ac5837c40c2d7e08490ffdef3c2c upstream.
Commit
d968d2b801d8 ("ARM: 7497/1: hw_breakpoint: allow single-byte
watchpoints on all addresses") changed the validation requirements for
hardware watchpoints on arch/arm/. Update our compat layer to implement
the same relaxation.
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Mon, 29 Jul 2019 10:43:48 +0000 (11:43 +0100)]
drivers/perf: arm_pmu: Fix failure path in PM notifier
commit
0d7fd70f26039bd4b33444ca47f0e69ce3ae0354 upstream.
Handling of the CPU_PM_ENTER_FAILED transition in the Arm PMU PM
notifier code incorrectly skips restoration of the counters. Fix the
logic so that CPU_PM_ENTER_FAILED follows the same path as CPU_PM_EXIT.
Cc: <stable@vger.kernel.org>
Fixes:
da4e4f18afe0f372 ("drivers/perf: arm_pmu: implement CPU_PM notifier")
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helge Deller [Thu, 1 Aug 2019 11:33:39 +0000 (13:33 +0200)]
parisc: Fix build of compressed kernel even with debug enabled
commit
3fe6c873af2f2247544debdbe51ec29f690a2ccf upstream.
With debug info enabled (CONFIG_DEBUG_INFO=y) the resulting vmlinux may get
that huge that we need to increase the start addresss for the decompression
text section otherwise one will face a linker error.
Reported-by: Sven Schnelle <svens@stackframe.org>
Tested-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Down [Sat, 3 Aug 2019 04:49:15 +0000 (21:49 -0700)]
cgroup: kselftest: relax fs_spec checks
commit
b59b1baab789eacdde809135542e3d4f256f6878 upstream.
On my laptop most memcg kselftests were being skipped because it claimed
cgroup v2 hierarchy wasn't mounted, but this isn't correct. Instead, it
seems current systemd HEAD mounts it with the name "cgroup2" instead of
"cgroup":
% grep cgroup /proc/mounts
cgroup2 /sys/fs/cgroup cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate 0 0
I can't think of a reason to need to check fs_spec explicitly
since it's arbitrary, so we can just rely on fs_vfstype.
After these changes, `make TARGETS=cgroup kselftest` actually runs the
cgroup v2 tests in more cases.
Link: http://lkml.kernel.org/r/20190723210737.GA487@chrisdown.name
Signed-off-by: Chris Down <chris@chrisdown.name>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Haberland [Thu, 1 Aug 2019 11:06:30 +0000 (13:06 +0200)]
s390/dasd: fix endless loop after read unit address configuration
commit
41995342b40c418a47603e1321256d2c4a2ed0fb upstream.
After getting a storage server event that causes the DASD device driver
to update its unit address configuration during a device shutdown there is
the possibility of an endless loop in the device driver.
In the system log there will be ongoing DASD error messages with RC: -19.
The reason is that the loop starting the ruac request only terminates when
the retry counter is decreased to 0. But in the sleep_on function there are
early exit paths that do not decrease the retry counter.
Prevent an endless loop by handling those cases separately.
Remove the unnecessary do..while loop since the sleep_on function takes
care of retries by itself.
Fixes:
8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")
Cc: stable@vger.kernel.org # 2.6.25+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yang Shi [Sat, 3 Aug 2019 04:48:44 +0000 (21:48 -0700)]
mm: vmscan: check if mem cgroup is disabled or not before calling memcg slab shrinker
commit
fa1e512fac717f34e7c12d7a384c46e90a647392 upstream.
Shakeel Butt reported premature oom on kernel with
"cgroup_disable=memory" since mem_cgroup_is_root() returns false even
though memcg is actually NULL. The drop_caches is also broken.
It is because commit
aeed1d325d42 ("mm/vmscan.c: generalize
shrink_slab() calls in shrink_node()") removed the !memcg check before
!mem_cgroup_is_root(). And, surprisingly root memcg is allocated even
though memory cgroup is disabled by kernel boot parameter.
Add mem_cgroup_disabled() check to make reclaimer work as expected.
Link: http://lkml.kernel.org/r/1563385526-20805-1-git-send-email-yang.shi@linux.alibaba.com
Fixes:
aeed1d325d42 ("mm/vmscan.c: generalize shrink_slab() calls in shrink_node()")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jan Hadrava <had@kam.mff.cuni.cz>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org> [4.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Samuel Thibault [Fri, 26 Jul 2019 21:47:02 +0000 (23:47 +0200)]
ALSA: hda: Fix 1-minute detection delay when i915 module is not available
commit
74bf71ed792ab0f64631cc65ccdb54c356c36d45 upstream.
Distribution installation images such as Debian include different sets
of modules which can be downloaded dynamically. Such images may notably
include the hda sound modules but not the i915 DRM module, even if the
latter was enabled at build time, as reported on
https://bugs.debian.org/931507
In such a case hdac_i915 would be linked in and try to load the i915
module, fail since it is not there, but still wait for a whole minute
before giving up binding with it.
This fixes such as case by only waiting for the binding if the module
was properly loaded (or module support is disabled, in which case i915
is already compiled-in anyway).
Fixes:
f9b54e1961c7 ("ALSA: hda/i915: Allow delayed i915 audio component binding")
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ondrej Mosnacek [Thu, 25 Jul 2019 10:52:43 +0000 (12:52 +0200)]
selinux: fix memory leak in policydb_init()
commit
45385237f65aeee73641f1ef737d7273905a233f upstream.
Since roles_init() adds some entries to the role hash table, we need to
destroy also its keys/values on error, otherwise we get a memory leak in
the error path.
Cc: <stable@vger.kernel.org>
Reported-by: syzbot+fee3a14d4cdf92646287@syzkaller.appspotmail.com
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marco Felsch [Tue, 30 Jul 2019 13:44:07 +0000 (15:44 +0200)]
mtd: rawnand: micron: handle on-die "ECC-off" devices correctly
commit
8493b2a06fc5b77ef5c579dc32b12761f7b7a84c upstream.
Some devices are not supposed to support on-die ECC but experience
shows that internal ECC machinery can actually be enabled through the
"SET FEATURE (EFh)" command, even if a read of the "READ ID Parameter
Tables" returns that it is not.
Currently, the driver checks the "READ ID Parameter" field directly
after having enabled the feature. If the check fails it returns
immediately but leaves the ECC on. When using buggy chips like
MT29F2G08ABAGA and MT29F2G08ABBGA, all future read/program cycles will
go through the on-die ECC, confusing the host controller which is
supposed to be the one handling correction.
To address this in a common way we need to turn off the on-die ECC
directly after reading the "READ ID Parameter" and before checking the
"ECC status".
Cc: stable@vger.kernel.org
Fixes:
dbc44edbf833 ("mtd: rawnand: micron: Fix on-die ECC detection logic")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gustavo A. R. Silva [Wed, 31 Jul 2019 17:54:28 +0000 (12:54 -0500)]
IB/hfi1: Fix Spectre v1 vulnerability
commit
6497d0a9c53df6e98b25e2b79f2295d7caa47b6e upstream.
sl is controlled by user-space, hence leading to a potential
exploitation of the Spectre variant 1 vulnerability.
Fix this by sanitizing sl before using it to index ibp->sl_to_sc.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://lore.kernel.org/lkml/
20180423164740.GY17484@dhcp22.suse.cz/
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20190731175428.GA16736@embeddedor
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Wu [Mon, 8 Jul 2019 05:23:08 +0000 (13:23 +0800)]
gpiolib: fix incorrect IRQ requesting of an active-low lineevent
commit
223ecaf140b1dd1c1d2a1a1d96281efc5c906984 upstream.
When a pin is active-low, logical trigger edge should be inverted to match
the same interrupt opportunity.
For example, a button pushed triggers falling edge in ACTIVE_HIGH case; in
ACTIVE_LOW case, the button pushed triggers rising edge. For user space the
IRQ requesting doesn't need to do any modification except to configuring
GPIOHANDLE_REQUEST_ACTIVE_LOW.
For example, we want to catch the event when the button is pushed. The
button on the original board drives level to be low when it is pushed, and
drives level to be high when it is released.
In user space we can do:
req.handleflags = GPIOHANDLE_REQUEST_INPUT;
req.eventflags = GPIOEVENT_REQUEST_FALLING_EDGE;
while (1) {
read(fd, &dat, sizeof(dat));
if (dat.id == GPIOEVENT_EVENT_FALLING_EDGE)
printf("button pushed\n");
}
Run the same logic on another board which the polarity of the button is
inverted; it drives level to be high when pushed, and level to be low when
released. For this inversion we add flag GPIOHANDLE_REQUEST_ACTIVE_LOW:
req.handleflags = GPIOHANDLE_REQUEST_INPUT |
GPIOHANDLE_REQUEST_ACTIVE_LOW;
req.eventflags = GPIOEVENT_REQUEST_FALLING_EDGE;
At the result, there are no any events caught when the button is pushed.
By the way, button releasing will emit a "falling" event. The timing of
"falling" catching is not expected.
Cc: stable@vger.kernel.org
Signed-off-by: Michael Wu <michael.wu@vatics.com>
Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Perches [Wed, 10 Jul 2019 05:04:19 +0000 (22:04 -0700)]
mmc: meson-mx-sdio: Fix misuse of GENMASK macro
commit
665e985c2f41bebc3e6cee7e04c36a44afbc58f7 upstream.
Arguments are supposed to be ordered high then low.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Fixes:
ed80a13bb4c4 ("mmc: meson-mx-sdio: Add a driver for the Amlogic
Meson8 and Meson8b SoCs")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Douglas Anderson [Mon, 8 Jul 2019 19:56:13 +0000 (12:56 -0700)]
mmc: dw_mmc: Fix occasional hang after tuning on eMMC
commit
ba2d139b02ba684c6c101de42fed782d6cd2b997 upstream.
In commit
46d179525a1f ("mmc: dw_mmc: Wait for data transfer after
response errors.") we fixed a tuning-induced hang that I saw when
stress testing tuning on certain SD cards. I won't re-hash that whole
commit, but the summary is that as a normal part of tuning you need to
deal with transfer errors and there were cases where these transfer
errors was putting my system into a bad state causing all future
transfers to fail. That commit fixed handling of the transfer errors
for me.
In downstream Chrome OS my fix landed and had the same behavior for
all SD/MMC commands. However, it looks like when the commit landed
upstream we limited it to only SD tuning commands. Presumably this
was to try to get around problems that Alim Akhtar reported on exynos
[1].
Unfortunately while stress testing reboots (and suspend/resume) on
some rk3288-based Chromebooks I found the same problem on the eMMC on
some of my Chromebooks (the ones with Hynix eMMC). Since the eMMC
tuning command is different (MMC_SEND_TUNING_BLOCK_HS200
vs. MMC_SEND_TUNING_BLOCK) we were basically getting back into the
same situation.
I'm hoping that whatever problems exynos was having in the past are
somehow magically fixed now and we can make the behavior the same for
all commands.
[1] https://lkml.kernel.org/r/CAGOxZ53WfNbaMe0_AM0qBqU47kAfgmPBVZC8K8Y-_J3mDMqW4A@mail.gmail.com
Fixes:
46d179525a1f ("mmc: dw_mmc: Wait for data transfer after response errors.")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Alim Akhtar <alim.akhtar@gmail.com>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Thu, 25 Jul 2019 10:27:04 +0000 (11:27 +0100)]
Btrfs: fix race leading to fs corruption after transaction abort
commit
cb2d3daddbfb6318d170e79aac1f7d5e4d49f0d7 upstream.
When one transaction is finishing its commit, it is possible for another
transaction to start and enter its initial commit phase as well. If the
first ends up getting aborted, we have a small time window where the second
transaction commit does not notice that the previous transaction aborted
and ends up committing, writing a superblock that points to btrees that
reference extent buffers (nodes and leafs) that were not persisted to disk.
The consequence is that after mounting the filesystem again, we will be
unable to load some btree nodes/leafs, either because the content on disk
is either garbage (or just zeroes) or corresponds to the old content of a
previouly COWed or deleted node/leaf, resulting in the well known error
messages "parent transid verify failed on ...".
The following sequence diagram illustrates how this can happen.
CPU 1 CPU 2
<at transaction N>
btrfs_commit_transaction()
(...)
--> sets transaction state to
TRANS_STATE_UNBLOCKED
--> sets fs_info->running_transaction
to NULL
(...)
btrfs_start_transaction()
start_transaction()
wait_current_trans()
--> returns immediately
because
fs_info->running_transaction
is NULL
join_transaction()
--> creates transaction N + 1
--> sets
fs_info->running_transaction
to transaction N + 1
--> adds transaction N + 1 to
the fs_info->trans_list list
--> returns transaction handle
pointing to the new
transaction N + 1
(...)
btrfs_sync_file()
btrfs_start_transaction()
--> returns handle to
transaction N + 1
(...)
btrfs_write_and_wait_transaction()
--> writeback of some extent
buffer fails, returns an
error
btrfs_handle_fs_error()
--> sets BTRFS_FS_STATE_ERROR in
fs_info->fs_state
--> jumps to label "scrub_continue"
cleanup_transaction()
btrfs_abort_transaction(N)
--> sets BTRFS_FS_STATE_TRANS_ABORTED
flag in fs_info->fs_state
--> sets aborted field in the
transaction and transaction
handle structures, for
transaction N only
--> removes transaction from the
list fs_info->trans_list
btrfs_commit_transaction(N + 1)
--> transaction N + 1 was not
aborted, so it proceeds
(...)
--> sets the transaction's state
to TRANS_STATE_COMMIT_START
--> does not find the previous
transaction (N) in the
fs_info->trans_list, so it
doesn't know that transaction
was aborted, and the commit
of transaction N + 1 proceeds
(...)
--> sets transaction N + 1 state
to TRANS_STATE_UNBLOCKED
btrfs_write_and_wait_transaction()
--> succeeds writing all extent
buffers created in the
transaction N + 1
write_all_supers()
--> succeeds
--> we now have a superblock on
disk that points to trees
that refer to at least one
extent buffer that was
never persisted
So fix this by updating the transaction commit path to check if the flag
BTRFS_FS_STATE_TRANS_ABORTED is set on fs_info->fs_state if after setting
the transaction to the TRANS_STATE_COMMIT_START we do not find any previous
transaction in the fs_info->trans_list. If the flag is set, just fail the
transaction commit with -EROFS, as we do in other places. The exact error
code for the previous transaction abort was already logged and reported.
Fixes:
49b25e0540904b ("btrfs: enhance transaction abort infrastructure")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Wed, 17 Jul 2019 12:23:39 +0000 (13:23 +0100)]
Btrfs: fix incremental send failure after deduplication
commit
b4f9a1a87a48c255bb90d8a6c3d555a1abb88130 upstream.
When doing an incremental send operation we can fail if we previously did
deduplication operations against a file that exists in both snapshots. In
that case we will fail the send operation with -EIO and print a message
to dmesg/syslog like the following:
BTRFS error (device sdc): Send: inconsistent snapshot, found updated \
extent for inode 257 without updated inode item, send root is 258, \
parent root is 257
This requires that we deduplicate to the same file in both snapshots for
the same amount of times on each snapshot. The issue happens because a
deduplication only updates the iversion of an inode and does not update
any other field of the inode, therefore if we deduplicate the file on
each snapshot for the same amount of time, the inode will have the same
iversion value (stored as the "sequence" field on the inode item) on both
snapshots, therefore it will be seen as unchanged between in the send
snapshot while there are new/updated/deleted extent items when comparing
to the parent snapshot. This makes the send operation return -EIO and
print an error message.
Example reproducer:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
# Create our first file. The first half of the file has several 64Kb
# extents while the second half as a single 512Kb extent.
$ xfs_io -f -s -c "pwrite -S 0xb8 -b 64K 0 512K" /mnt/foo
$ xfs_io -c "pwrite -S 0xb8 512K 512K" /mnt/foo
# Create the base snapshot and the parent send stream from it.
$ btrfs subvolume snapshot -r /mnt /mnt/mysnap1
$ btrfs send -f /tmp/1.snap /mnt/mysnap1
# Create our second file, that has exactly the same data as the first
# file.
$ xfs_io -f -c "pwrite -S 0xb8 0 1M" /mnt/bar
# Create the second snapshot, used for the incremental send, before
# doing the file deduplication.
$ btrfs subvolume snapshot -r /mnt /mnt/mysnap2
# Now before creating the incremental send stream:
#
# 1) Deduplicate into a subrange of file foo in snapshot mysnap1. This
# will drop several extent items and add a new one, also updating
# the inode's iversion (sequence field in inode item) by 1, but not
# any other field of the inode;
#
# 2) Deduplicate into a different subrange of file foo in snapshot
# mysnap2. This will replace an extent item with a new one, also
# updating the inode's iversion by 1 but not any other field of the
# inode.
#
# After these two deduplication operations, the inode items, for file
# foo, are identical in both snapshots, but we have different extent
# items for this inode in both snapshots. We want to check this doesn't
# cause send to fail with an error or produce an incorrect stream.
$ xfs_io -r -c "dedupe /mnt/bar 0 0 512K" /mnt/mysnap1/foo
$ xfs_io -r -c "dedupe /mnt/bar 512K 512K 512K" /mnt/mysnap2/foo
# Create the incremental send stream.
$ btrfs send -p /mnt/mysnap1 -f /tmp/2.snap /mnt/mysnap2
ERROR: send ioctl failed with -5: Input/output error
This issue started happening back in 2015 when deduplication was updated
to not update the inode's ctime and mtime and update only the iversion.
Back then we would hit a BUG_ON() in send, but later in 2016 send was
updated to return -EIO and print the error message instead of doing the
BUG_ON().
A test case for fstests follows soon.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203933
Fixes:
1c919a5e13702c ("btrfs: don't update mtime/ctime on deduped inodes")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masahiro Yamada [Mon, 29 Jul 2019 09:15:17 +0000 (18:15 +0900)]
kbuild: initialize CLANG_FLAGS correctly in the top Makefile
commit
5241ab4cf42d3a93b933b55d3d53f43049081fa1 upstream.
CLANG_FLAGS is initialized by the following line:
CLANG_FLAGS := --target=$(notdir $(CROSS_COMPILE:%-=%))
..., which is run only when CROSS_COMPILE is set.
Some build targets (bindeb-pkg etc.) recurse to the top Makefile.
When you build the kernel with Clang but without CROSS_COMPILE,
the same compiler flags such as -no-integrated-as are accumulated
into CLANG_FLAGS.
If you run 'make CC=clang' and then 'make CC=clang bindeb-pkg',
Kbuild will recompile everything needlessly due to the build command
change.
Fix this by correctly initializing CLANG_FLAGS.
Fixes:
238bcbc4e07f ("kbuild: consolidate Clang compiler flags")
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
M. Vefa Bicakci [Sat, 3 Aug 2019 10:02:12 +0000 (06:02 -0400)]
kconfig: Clear "written" flag to avoid data loss
commit
0c5b6c28ed68becb692b43eae5e44d5aa7e160ce upstream.
Prior to this commit, starting nconfig, xconfig or gconfig, and saving
the .config file more than once caused data loss, where a .config file
that contained only comments would be written to disk starting from the
second save operation.
This bug manifests itself because the SYMBOL_WRITTEN flag is never
cleared after the first call to conf_write, and subsequent calls to
conf_write then skip all of the configuration symbols due to the
SYMBOL_WRITTEN flag being set.
This commit resolves this issue by clearing the SYMBOL_WRITTEN flag
from all symbols before conf_write returns.
Fixes:
8e2442a5f86e ("kconfig: fix missing choice values in auto.conf")
Cc: linux-stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yongxin Liu [Mon, 1 Jul 2019 01:46:22 +0000 (09:46 +0800)]
drm/nouveau: fix memory leak in nouveau_conn_reset()
[ Upstream commit
09b90e2fe35faeace2488234e2a7728f2ea8ba26 ]
In nouveau_conn_reset(), if connector->state is true,
__drm_atomic_helper_connector_destroy_state() will be called,
but the memory pointed by asyc isn't freed. Memory leak happens
in the following function __drm_atomic_helper_connector_reset(),
where newly allocated asyc->state will be assigned to connector->state.
So using nouveau_conn_atomic_destroy_state() instead of
__drm_atomic_helper_connector_destroy_state to free the "old" asyc.
Here the is the log showing memory leak.
unreferenced object 0xffff8c5480483c80 (size 192):
comm "kworker/0:2", pid 188, jiffies
4294695279 (age 53.179s)
hex dump (first 32 bytes):
00 f0 ba 7b 54 8c ff ff 00 00 00 00 00 00 00 00 ...{T...........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
000000005005c0d0>] kmem_cache_alloc_trace+0x195/0x2c0
[<
00000000a122baed>] nouveau_conn_reset+0x25/0xc0 [nouveau]
[<
000000004fd189a2>] nouveau_connector_create+0x3a7/0x610 [nouveau]
[<
00000000c73343a8>] nv50_display_create+0x343/0x980 [nouveau]
[<
000000002e2b03c3>] nouveau_display_create+0x51f/0x660 [nouveau]
[<
00000000c924699b>] nouveau_drm_device_init+0x182/0x7f0 [nouveau]
[<
00000000cc029436>] nouveau_drm_probe+0x20c/0x2c0 [nouveau]
[<
000000007e961c3e>] local_pci_probe+0x47/0xa0
[<
00000000da14d569>] work_for_cpu_fn+0x1a/0x30
[<
0000000028da4805>] process_one_work+0x27c/0x660
[<
000000001d415b04>] worker_thread+0x22b/0x3f0
[<
0000000003b69f1f>] kthread+0x12f/0x150
[<
00000000c94c29b7>] ret_from_fork+0x3a/0x50
Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhenzhong Duan [Tue, 16 Jul 2019 13:18:12 +0000 (21:18 +0800)]
x86, boot: Remove multiple copy of static function sanitize_boot_params()
[ Upstream commit
8c5477e8046ca139bac250386c08453da37ec1ae ]
Kernel build warns:
'sanitize_boot_params' defined but not used [-Wunused-function]
at below files:
arch/x86/boot/compressed/cmdline.c
arch/x86/boot/compressed/error.c
arch/x86/boot/compressed/early_serial_console.c
arch/x86/boot/compressed/acpi.c
That's becausethey each include misc.h which includes a definition of
sanitize_boot_params() via bootparam_utils.h.
Remove the inclusion from misc.h and have the c file including
bootparam_utils.h directly.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1563283092-1189-1-git-send-email-zhenzhong.duan@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Josh Poimboeuf [Thu, 18 Jul 2019 01:36:36 +0000 (20:36 -0500)]
x86/paravirt: Fix callee-saved function ELF sizes
[ Upstream commit
083db6764821996526970e42d09c1ab2f4155dd4 ]
The __raw_callee_save_*() functions have an ELF symbol size of zero,
which confuses objtool and other tools.
Fixes a bunch of warnings like the following:
arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_pte_val() is missing an ELF size annotation
arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_pgd_val() is missing an ELF size annotation
arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_make_pte() is missing an ELF size annotation
arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_make_pgd() is missing an ELF size annotation
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/afa6d49bb07497ca62e4fc3b27a2d0cece545b4e.1563413318.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Josh Poimboeuf [Thu, 18 Jul 2019 01:36:39 +0000 (20:36 -0500)]
x86/kvm: Don't call kvm_spurious_fault() from .fixup
[ Upstream commit
3901336ed9887b075531bffaeef7742ba614058b ]
After making a change to improve objtool's sibling call detection, it
started showing the following warning:
arch/x86/kvm/vmx/nested.o: warning: objtool: .fixup+0x15: sibling call from callable instruction with modified stack frame
The problem is the ____kvm_handle_fault_on_reboot() macro. It does a
fake call by pushing a fake RIP and doing a jump. That tricks the
unwinder into printing the function which triggered the exception,
rather than the .fixup code.
Instead of the hack to make it look like the original function made the
call, just change the macro so that the original function actually does
make the call. This allows removal of the hack, and also makes objtool
happy.
I triggered a vmx instruction exception and verified that the stack
trace is still sane:
kernel BUG at arch/x86/kvm/x86.c:358!
invalid opcode: 0000 [#1] SMP PTI
CPU: 28 PID: 4096 Comm: qemu-kvm Not tainted 5.2.0+ #16
Hardware name: Lenovo THINKSYSTEM SD530 -[7X2106Z000]-/-[7X2106Z000]-, BIOS -[TEE113Z-1.00]- 07/17/2017
RIP: 0010:kvm_spurious_fault+0x5/0x10
Code: 00 00 00 00 00 8b 44 24 10 89 d2 45 89 c9 48 89 44 24 10 8b 44 24 08 48 89 44 24 08 e9 d4 40 22 00 0f 1f 40 00 0f 1f 44 00 00 <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 fd 41
RSP: 0018:
ffffbf91c683bd00 EFLAGS:
00010246
RAX:
000061f040000000 RBX:
ffff9e159c77bba0 RCX:
ffff9e15a5c87000
RDX:
0000000665c87000 RSI:
ffff9e15a5c87000 RDI:
ffff9e159c77bba0
RBP:
0000000000000000 R08:
0000000000000000 R09:
ffff9e15a5c87000
R10:
0000000000000000 R11:
fffff8f2d99721c0 R12:
ffff9e159c77bba0
R13:
ffffbf91c671d960 R14:
ffff9e159c778000 R15:
0000000000000000
FS:
00007fa341cbe700(0000) GS:
ffff9e15b7400000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007fdd38356804 CR3:
00000006759de003 CR4:
00000000007606e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
PKRU:
55555554
Call Trace:
loaded_vmcs_init+0x4f/0xe0
alloc_loaded_vmcs+0x38/0xd0
vmx_create_vcpu+0xf7/0x600
kvm_vm_ioctl+0x5e9/0x980
? __switch_to_asm+0x40/0x70
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x40/0x70
? __switch_to_asm+0x34/0x70
? free_one_page+0x13f/0x4e0
do_vfs_ioctl+0xa4/0x630
ksys_ioctl+0x60/0x90
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x55/0x1c0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fa349b1ee5b
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/64a9b64d127e87b6920a97afde8e96ea76f6524e.1563413318.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhenzhong Duan [Sun, 14 Jul 2019 09:15:32 +0000 (17:15 +0800)]
xen/pv: Fix a boot up hang revealed by int3 self test
[ Upstream commit
b23e5844dfe78a80ba672793187d3f52e4b528d7 ]
Commit
7457c0da024b ("x86/alternatives: Add int3_emulate_call()
selftest") is used to ensure there is a gap setup in int3 exception stack
which could be used for inserting call return address.
This gap is missed in XEN PV int3 exception entry path, then below panic
triggered:
[ 0.772876] general protection fault: 0000 [#1] SMP NOPTI
[ 0.772886] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.2.0+ #11
[ 0.772893] RIP: e030:int3_magic+0x0/0x7
[ 0.772905] RSP: 3507:
ffffffff82203e98 EFLAGS:
00000246
[ 0.773334] Call Trace:
[ 0.773334] alternative_instructions+0x3d/0x12e
[ 0.773334] check_bugs+0x7c9/0x887
[ 0.773334] ? __get_locked_pte+0x178/0x1f0
[ 0.773334] start_kernel+0x4ff/0x535
[ 0.773334] ? set_init_arg+0x55/0x55
[ 0.773334] xen_start_kernel+0x571/0x57a
For 64bit PV guests, Xen's ABI enters the kernel with using SYSRET, with
%rcx/%r11 on the stack. To convert back to "normal" looking exceptions,
the xen thunks do 'xen_*: pop %rcx; pop %r11; jmp *'.
E.g. Extracting 'xen_pv_trap xenint3' we have:
xen_xenint3:
pop %rcx;
pop %r11;
jmp xenint3
As xenint3 and int3 entry code are same except xenint3 doesn't generate
a gap, we can fix it by using int3 and drop useless xenint3.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Petr Machata [Wed, 17 Jul 2019 20:29:07 +0000 (23:29 +0300)]
mlxsw: spectrum_dcb: Configure DSCP map as the last rule is removed
[ Upstream commit
dedfde2fe1c4ccf27179fcb234e2112d065c39bb ]
Spectrum systems use DSCP rewrite map to update DSCP field in egressing
packets to correspond to priority that the packet has. Whether rewriting
will take place is determined at the point when the packet ingresses the
switch: if the port is in Trust L3 mode, packet priority is determined from
the DSCP map at the port, and DSCP rewrite will happen. If the port is in
Trust L2 mode, 802.1p is used for packet prioritization, and no DSCP
rewrite will happen.
The driver determines the port trust mode based on whether any DSCP
prioritization rules are in effect at given port. If there are any, trust
level is L3, otherwise it's L2. When the last DSCP rule is removed, the
port is switched to trust L2. Under that scenario, if DSCP of a packet
should be rewritten, it should be rewritten to 0.
However, when switching to Trust L2, the driver neglects to also update the
DSCP rewrite map. The last DSCP rule thus remains in effect, and packets
egressing through this port, if they have the right priority, will have
their DSCP set according to this rule.
Fix by first configuring the rewrite map, and only then switching to trust
L2 and bailing out.
Fixes:
b2b1dab6884e ("mlxsw: spectrum: Support ieee_setapp, ieee_delapp")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reported-by: Alex Veber <alexve@mellanox.com>
Tested-by: Alex Veber <alexve@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kees Cook [Tue, 16 Jul 2019 23:30:21 +0000 (16:30 -0700)]
ipc/mqueue.c: only perform resource calculation if user valid
[ Upstream commit
a318f12ed8843cfac53198390c74a565c632f417 ]
Andreas Christoforou reported:
UBSAN: Undefined behaviour in ipc/mqueue.c:414:49 signed integer overflow:
9 *
2305843009213693951 cannot be represented in type 'long int'
...
Call Trace:
mqueue_evict_inode+0x8e7/0xa10 ipc/mqueue.c:414
evict+0x472/0x8c0 fs/inode.c:558
iput_final fs/inode.c:1547 [inline]
iput+0x51d/0x8c0 fs/inode.c:1573
mqueue_get_inode+0x8eb/0x1070 ipc/mqueue.c:320
mqueue_create_attr+0x198/0x440 ipc/mqueue.c:459
vfs_mkobj+0x39e/0x580 fs/namei.c:2892
prepare_open ipc/mqueue.c:731 [inline]
do_mq_open+0x6da/0x8e0 ipc/mqueue.c:771
Which could be triggered by:
struct mq_attr attr = {
.mq_flags = 0,
.mq_maxmsg = 9,
.mq_msgsize = 0x1fffffffffffffff,
.mq_curmsgs = 0,
};
if (mq_open("/testing", 0x40, 3, &attr) == (mqd_t) -1)
perror("mq_open");
mqueue_get_inode() was correctly rejecting the giant mq_msgsize, and
preparing to return -EINVAL. During the cleanup, it calls
mqueue_evict_inode() which performed resource usage tracking math for
updating "user", before checking if there was a valid "user" at all
(which would indicate that the calculations would be sane). Instead,
delay this check to after seeing a valid "user".
The overflow was real, but the results went unused, so while the flaw is
harmless, it's noisy for kernel fuzzers, so just fix it by moving the
calculation under the non-NULL "user" where it actually gets used.
Link: http://lkml.kernel.org/r/201906072207.ECB65450@keescook
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Andreas Christoforou <andreaschristofo@gmail.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Tue, 16 Jul 2019 23:30:03 +0000 (16:30 -0700)]
drivers/rapidio/devices/rio_mport_cdev.c: NUL terminate some strings
[ Upstream commit
156e0b1a8112b76e351684ac948c59757037ac36 ]
The dev_info.name[] array has space for RIO_MAX_DEVNAME_SZ + 1
characters. But the problem here is that we don't ensure that the user
put a NUL terminator on the end of the string. It could lead to an out
of bounds read.
Link: http://lkml.kernel.org/r/20190529110601.GB19119@mwanda
Fixes:
e8de370188d0 ("rapidio: add mport char device driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mikko Rapeli [Tue, 16 Jul 2019 23:28:10 +0000 (16:28 -0700)]
uapi linux/coda_psdev.h: move upc_req definition from uapi to kernel side headers
[ Upstream commit
f90fb3c7e2c13ae829db2274b88b845a75038b8a ]
Only users of upc_req in kernel side fs/coda/psdev.c and
fs/coda/upcall.c already include linux/coda_psdev.h.
Suggested by Jan Harkes <jaharkes@cs.cmu.edu> in
https://lore.kernel.org/lkml/
20150531111913.GA23377@cs.cmu.edu/
Fixes these include/uapi/linux/coda_psdev.h compilation errors in userspace:
linux/coda_psdev.h:12:19: error: field `uc_chain' has incomplete type
struct list_head uc_chain;
^
linux/coda_psdev.h:13:2: error: unknown type name `caddr_t'
caddr_t uc_data;
^
linux/coda_psdev.h:14:2: error: unknown type name `u_short'
u_short uc_flags;
^
linux/coda_psdev.h:15:2: error: unknown type name `u_short'
u_short uc_inSize; /* Size is at most 5000 bytes */
^
linux/coda_psdev.h:16:2: error: unknown type name `u_short'
u_short uc_outSize;
^
linux/coda_psdev.h:17:2: error: unknown type name `u_short'
u_short uc_opcode; /* copied from data to save lookup */
^
linux/coda_psdev.h:19:2: error: unknown type name `wait_queue_head_t'
wait_queue_head_t uc_sleep; /* process' wait queue */
^
Link: http://lkml.kernel.org/r/9f99f5ce6a0563d5266e6cf7aa9585aac2cae971.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sam Protsenko [Tue, 16 Jul 2019 23:28:20 +0000 (16:28 -0700)]
coda: fix build using bare-metal toolchain
[ Upstream commit
b2a57e334086602be56b74958d9f29b955cd157f ]
The kernel is self-contained project and can be built with bare-metal
toolchain. But bare-metal toolchain doesn't define __linux__. Because
of this u_quad_t type is not defined when using bare-metal toolchain and
codafs build fails. This patch fixes it by defining u_quad_t type
unconditionally.
Link: http://lkml.kernel.org/r/3cbb40b0a57b6f9923a9d67b53473c0b691a3eaa.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhouyang Jia [Tue, 16 Jul 2019 23:28:13 +0000 (16:28 -0700)]
coda: add error handling for fget
[ Upstream commit
02551c23bcd85f0c68a8259c7b953d49d44f86af ]
When fget fails, the lack of error-handling code may cause unexpected
results.
This patch adds error-handling code after calling fget.
Link: http://lkml.kernel.org/r/2514ec03df9c33b86e56748513267a80dd8004d9.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Rosin [Tue, 16 Jul 2019 23:27:18 +0000 (16:27 -0700)]
lib/test_string.c: avoid masking memset16/32/64 failures
[ Upstream commit
33d6e0ff68af74be0c846c8e042e84a9a1a0561e ]
If a memsetXX implementation is completely broken and fails in the first
iteration, when i, j, and k are all zero, the failure is masked as zero
is returned. Failing in the first iteration is perhaps the most likely
failure, so this makes the tests pretty much useless. Avoid the
situation by always setting a random unused bit in the result on
failure.
Link: http://lkml.kernel.org/r/20190506124634.6807-3-peda@axentia.se
Fixes:
03270c13c5ff ("lib/string.c: add testcases for memset16/32/64")
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kees Cook [Tue, 16 Jul 2019 23:27:24 +0000 (16:27 -0700)]
lib/test_overflow.c: avoid tainting the kernel and fix wrap size
[ Upstream commit
8e060c21ae2c265a2b596e9e7f9f97ec274151a4 ]
This adds __GFP_NOWARN to the kmalloc()-portions of the overflow test to
avoid tainting the kernel. Additionally fixes up the math on wrap size
to be architecture and page size agnostic.
Link: http://lkml.kernel.org/r/201905282012.0A8767E24@keescook
Fixes:
ca90800a91ba ("test_overflow: Add memory allocation overflow tests")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Doug Berger [Tue, 16 Jul 2019 23:26:24 +0000 (16:26 -0700)]
mm/cma.c: fail if fixed declaration can't be honored
[ Upstream commit
c633324e311243586675e732249339685e5d6faa ]
The description of cma_declare_contiguous() indicates that if the
'fixed' argument is true the reserved contiguous area must be exactly at
the address of the 'base' argument.
However, the function currently allows the 'base', 'size', and 'limit'
arguments to be silently adjusted to meet alignment constraints. This
commit enforces the documented behavior through explicit checks that
return an error if the region does not fit within a specified region.
Link: http://lkml.kernel.org/r/1561422051-16142-1-git-send-email-opendmb@gmail.com
Fixes:
5ea3b1b2f8ad ("cma: add placement specifier for "cma=" kernel parameter")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Yue Hu <huyue2@yulong.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Fri, 12 Jul 2019 09:08:05 +0000 (11:08 +0200)]
x86: math-emu: Hide clang warnings for 16-bit overflow
[ Upstream commit
29e7e9664aec17b94a9c8c5a75f8d216a206aa3a ]
clang warns about a few parts of the math-emu implementation
where a 16-bit integer becomes negative during assignment:
arch/x86/math-emu/poly_tan.c:88:35: error: implicit conversion from 'int' to 'short' changes value from 49216 to -16320 [-Werror,-Wconstant-conversion]
(0x41 + EXTENDED_Ebias) | SIGN_Negative);
~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
arch/x86/math-emu/fpu_emu.h:180:58: note: expanded from macro 'setexponent16'
#define setexponent16(x,y) { (*(short *)&((x)->exp)) = (y); }
~ ^
arch/x86/math-emu/reg_constant.c:37:32: error: implicit conversion from 'int' to 'short' changes value from 49085 to -16451 [-Werror,-Wconstant-conversion]
FPU_REG const CONST_PI2extra = MAKE_REG(NEG, -66,
^~~~~~~~~~~~~~~~~~
arch/x86/math-emu/reg_constant.c:21:25: note: expanded from macro 'MAKE_REG'
((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) }
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/math-emu/reg_constant.c:48:28: error: implicit conversion from 'int' to 'short' changes value from 65535 to -1 [-Werror,-Wconstant-conversion]
FPU_REG const CONST_QNaN = MAKE_REG(NEG, EXP_OVER, 0x00000000, 0xC0000000);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/math-emu/reg_constant.c:21:25: note: expanded from macro 'MAKE_REG'
((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) }
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
The code is correct as is, so add a typecast to shut up the warnings.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190712090816.350668-1-arnd@arndb.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qian Cai [Mon, 8 Jul 2019 21:36:45 +0000 (17:36 -0400)]
x86/apic: Silence -Wtype-limits compiler warnings
[ Upstream commit
ec6335586953b0df32f83ef696002063090c7aef ]
There are many compiler warnings like this,
In file included from ./arch/x86/include/asm/smp.h:13,
from ./arch/x86/include/asm/mmzone_64.h:11,
from ./arch/x86/include/asm/mmzone.h:5,
from ./include/linux/mmzone.h:969,
from ./include/linux/gfp.h:6,
from ./include/linux/mm.h:10,
from arch/x86/kernel/apic/io_apic.c:34:
arch/x86/kernel/apic/io_apic.c: In function 'check_timer':
./arch/x86/include/asm/apic.h:37:11: warning: comparison of unsigned
expression >= 0 is always true [-Wtype-limits]
if ((v) <= apic_verbosity) \
^~
arch/x86/kernel/apic/io_apic.c:2160:2: note: in expansion of macro
'apic_printk'
apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X "
^~~~~~~~~~~
./arch/x86/include/asm/apic.h:37:11: warning: comparison of unsigned
expression >= 0 is always true [-Wtype-limits]
if ((v) <= apic_verbosity) \
^~
arch/x86/kernel/apic/io_apic.c:2207:4: note: in expansion of macro
'apic_printk'
apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
^~~~~~~~~~~
APIC_QUIET is 0, so silence them by making apic_verbosity type int.
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1562621805-24789-1-git-send-email-cai@lca.pw
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benjamin Poirier [Tue, 16 Jul 2019 08:16:55 +0000 (17:16 +0900)]
be2net: Signal that the device cannot transmit during reconfiguration
[ Upstream commit
7429c6c0d9cb086d8e79f0d2a48ae14851d2115e ]
While changing the number of interrupt channels, be2net stops adapter
operation (including netif_tx_disable()) but it doesn't signal that it
cannot transmit. This may lead dev_watchdog() to falsely trigger during
that time.
Add the missing call to netif_carrier_off(), following the pattern used in
many other drivers. netif_carrier_on() is already taken care of in
be_open().
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Fri, 12 Jul 2019 09:01:21 +0000 (11:01 +0200)]
ACPI: fix false-positive -Wuninitialized warning
[ Upstream commit
dfd6f9ad36368b8dbd5f5a2b2f0a4705ae69a323 ]
clang gets confused by an uninitialized variable in what looks
to it like a never executed code path:
arch/x86/kernel/acpi/boot.c:618:13: error: variable 'polarity' is uninitialized when used here [-Werror,-Wuninitialized]
polarity = polarity ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
^~~~~~~~
arch/x86/kernel/acpi/boot.c:606:32: note: initialize the variable 'polarity' to silence this warning
int rc, irq, trigger, polarity;
^
= 0
arch/x86/kernel/acpi/boot.c:617:12: error: variable 'trigger' is uninitialized when used here [-Werror,-Wuninitialized]
trigger = trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
^~~~~~~
arch/x86/kernel/acpi/boot.c:606:22: note: initialize the variable 'trigger' to silence this warning
int rc, irq, trigger, polarity;
^
= 0
This is unfortunately a design decision in clang and won't be fixed.
Changing the acpi_get_override_irq() macro to an inline function
reliably avoids the issue.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Fri, 12 Jul 2019 09:12:30 +0000 (11:12 +0200)]
x86: kvm: avoid constant-conversion warning
[ Upstream commit
a6a6d3b1f867d34ba5bd61aa7bb056b48ca67cff ]
clang finds a contruct suspicious that converts an unsigned
character to a signed integer and back, causing an overflow:
arch/x86/kvm/mmu.c:4605:39: error: implicit conversion from 'int' to 'u8' (aka 'unsigned char') changes value from -205 to 51 [-Werror,-Wconstant-conversion]
u8 wf = (pfec & PFERR_WRITE_MASK) ? ~w : 0;
~~ ^~
arch/x86/kvm/mmu.c:4607:38: error: implicit conversion from 'int' to 'u8' (aka 'unsigned char') changes value from -241 to 15 [-Werror,-Wconstant-conversion]
u8 uf = (pfec & PFERR_USER_MASK) ? ~u : 0;
~~ ^~
arch/x86/kvm/mmu.c:4609:39: error: implicit conversion from 'int' to 'u8' (aka 'unsigned char') changes value from -171 to 85 [-Werror,-Wconstant-conversion]
u8 ff = (pfec & PFERR_FETCH_MASK) ? ~x : 0;
~~ ^~
Add an explicit cast to tell clang that everything works as
intended here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://github.com/ClangBuiltLinux/linux/issues/95
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ravi Bangoria [Tue, 11 Jun 2019 03:01:09 +0000 (08:31 +0530)]
perf version: Fix segfault due to missing OPT_END()
[ Upstream commit
916c31fff946fae0e05862f9b2435fdb29fd5090 ]
'perf version' on powerpc segfaults when used with non-supported
option:
# perf version -a
Segmentation fault (core dumped)
Fix this.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Tested-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20190611030109.20228-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benjamin Block [Tue, 2 Jul 2019 21:02:02 +0000 (23:02 +0200)]
scsi: zfcp: fix GCC compiler warning emitted with -Wmaybe-uninitialized
[ Upstream commit
484647088826f2f651acbda6bcf9536b8a466703 ]
GCC v9 emits this warning:
CC drivers/s390/scsi/zfcp_erp.o
drivers/s390/scsi/zfcp_erp.c: In function 'zfcp_erp_action_enqueue':
drivers/s390/scsi/zfcp_erp.c:217:26: warning: 'erp_action' may be used uninitialized in this function [-Wmaybe-uninitialized]
217 | struct zfcp_erp_action *erp_action;
| ^~~~~~~~~~
This is a possible false positive case, as also documented in the GCC
documentations:
https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wmaybe-uninitialized
The actual code-sequence is like this:
Various callers can invoke the function below with the argument "want"
being one of:
ZFCP_ERP_ACTION_REOPEN_ADAPTER,
ZFCP_ERP_ACTION_REOPEN_PORT_FORCED,
ZFCP_ERP_ACTION_REOPEN_PORT, or
ZFCP_ERP_ACTION_REOPEN_LUN.
zfcp_erp_action_enqueue(want, ...)
...
need = zfcp_erp_required_act(want, ...)
need = want
...
maybe: need = ZFCP_ERP_ACTION_REOPEN_PORT
maybe: need = ZFCP_ERP_ACTION_REOPEN_ADAPTER
...
return need
...
zfcp_erp_setup_act(need, ...)
struct zfcp_erp_action *erp_action; // <== line 217
...
switch(need) {
case ZFCP_ERP_ACTION_REOPEN_LUN:
...
erp_action = &zfcp_sdev->erp_action;
WARN_ON_ONCE(erp_action->port != port); // <== access
...
break;
case ZFCP_ERP_ACTION_REOPEN_PORT:
case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED:
...
erp_action = &port->erp_action;
WARN_ON_ONCE(erp_action->port != port); // <== access
...
break;
case ZFCP_ERP_ACTION_REOPEN_ADAPTER:
...
erp_action = &adapter->erp_action;
WARN_ON_ONCE(erp_action->port != NULL); // <== access
...
break;
}
...
WARN_ON_ONCE(erp_action->adapter != adapter); // <== access
When zfcp_erp_setup_act() is called, 'need' will never be anything else
than one of the 4 possible enumeration-names that are used in the
switch-case, and 'erp_action' is initialized for every one of them, before
it is used. Thus the warning is a false positive, as documented.
We introduce the extra if{} in the beginning to create an extra code-flow,
so the compiler can be convinced that the switch-case will never see any
other value.
BUG_ON()/BUG() is intentionally not used to not crash anything, should
this ever happen anyway - right now it's impossible, as argued above; and
it doesn't introduce a 'default:' switch-case to retain warnings should
'enum zfcp_erp_act_type' ever be extended and no explicit case be
introduced. See also v5.0 commit
399b6c8bc9f7 ("scsi: zfcp: drop old
default switch case which might paper over missing case").
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Wed, 10 Jul 2019 13:05:43 +0000 (15:05 +0200)]
ACPI: blacklist: fix clang warning for unused DMI table
[ Upstream commit
b80d6a42bdc97bdb6139107d6034222e9843c6e2 ]
When CONFIG_DMI is disabled, we only have a tentative declaration,
which causes a warning from clang:
drivers/acpi/blacklist.c:20:35: error: tentative array definition assumed to have one element [-Werror]
static const struct dmi_system_id acpi_rev_dmi_table[] __initconst;
As the variable is not actually used here, hide it entirely
in an #ifdef to shut up the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jeff Layton [Thu, 13 Jun 2019 19:17:00 +0000 (15:17 -0400)]
ceph: return -ERANGE if virtual xattr value didn't fit in buffer
[ Upstream commit
3b421018f48c482bdc9650f894aa1747cf90e51d ]
The getxattr manpage states that we should return ERANGE if the
destination buffer size is too small to hold the value.
ceph_vxattrcb_layout does this internally, but we should be doing
this for all vxattrs.
Fix the only caller of getxattr_cb to check the returned size
against the buffer length and return -ERANGE if it doesn't fit.
Drop the same check in ceph_vxattrcb_layout and just rely on the
caller to handle it.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Acked-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrea Parri [Mon, 20 May 2019 17:23:58 +0000 (19:23 +0200)]
ceph: fix improper use of smp_mb__before_atomic()
[ Upstream commit
749607731e26dfb2558118038c40e9c0c80d23b5 ]
This barrier only applies to the read-modify-write operations; in
particular, it does not apply to the atomic64_set() primitive.
Replace the barrier with an smp_mb().
Fixes:
fdd4e15838e59 ("ceph: rework dcache readdir")
Reported-by: "Paul E. McKenney" <paulmck@linux.ibm.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ronnie Sahlberg [Fri, 5 Jul 2019 20:52:46 +0000 (06:52 +1000)]
cifs: Fix a race condition with cifs_echo_request
[ Upstream commit
f2caf901c1b7ce65f9e6aef4217e3241039db768 ]
There is a race condition with how we send (or supress and don't send)
smb echos that will cause the client to incorrectly think the
server is unresponsive and thus needs to be reconnected.
Summary of the race condition:
1) Daisy chaining scheduling creates a gap.
2) If traffic comes unfortunate shortly after
the last echo, the planned echo is suppressed.
3) Due to the gap, the next echo transmission is delayed
until after the timeout, which is set hard to twice
the echo interval.
This is fixed by changing the timeouts from 2 to three times the echo interval.
Detailed description of the bug: https://lutz.donnerhacke.de/eng/Blog/Groundhog-Day-with-SMB-remount
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qu Wenruo [Thu, 13 Jun 2019 09:31:24 +0000 (17:31 +0800)]
btrfs: qgroup: Don't hold qgroup_ioctl_lock in btrfs_qgroup_inherit()
[ Upstream commit
e88439debd0a7f969b3ddba6f147152cd0732676 ]
[BUG]
Lockdep will report the following circular locking dependency:
WARNING: possible circular locking dependency detected
5.2.0-rc2-custom #24 Tainted: G O
------------------------------------------------------
btrfs/8631 is trying to acquire lock:
000000002536438c (&fs_info->qgroup_ioctl_lock#2){+.+.}, at: btrfs_qgroup_inherit+0x40/0x620 [btrfs]
but task is already holding lock:
000000003d52cc23 (&fs_info->tree_log_mutex){+.+.}, at: create_pending_snapshot+0x8b6/0xe60 [btrfs]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&fs_info->tree_log_mutex){+.+.}:
__mutex_lock+0x76/0x940
mutex_lock_nested+0x1b/0x20
btrfs_commit_transaction+0x475/0xa00 [btrfs]
btrfs_commit_super+0x71/0x80 [btrfs]
close_ctree+0x2bd/0x320 [btrfs]
btrfs_put_super+0x15/0x20 [btrfs]
generic_shutdown_super+0x72/0x110
kill_anon_super+0x18/0x30
btrfs_kill_super+0x16/0xa0 [btrfs]
deactivate_locked_super+0x3a/0x80
deactivate_super+0x51/0x60
cleanup_mnt+0x3f/0x80
__cleanup_mnt+0x12/0x20
task_work_run+0x94/0xb0
exit_to_usermode_loop+0xd8/0xe0
do_syscall_64+0x210/0x240
entry_SYSCALL_64_after_hwframe+0x49/0xbe
-> #1 (&fs_info->reloc_mutex){+.+.}:
__mutex_lock+0x76/0x940
mutex_lock_nested+0x1b/0x20
btrfs_commit_transaction+0x40d/0xa00 [btrfs]
btrfs_quota_enable+0x2da/0x730 [btrfs]
btrfs_ioctl+0x2691/0x2b40 [btrfs]
do_vfs_ioctl+0xa9/0x6d0
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x1a/0x20
do_syscall_64+0x65/0x240
entry_SYSCALL_64_after_hwframe+0x49/0xbe
-> #0 (&fs_info->qgroup_ioctl_lock#2){+.+.}:
lock_acquire+0xa7/0x190
__mutex_lock+0x76/0x940
mutex_lock_nested+0x1b/0x20
btrfs_qgroup_inherit+0x40/0x620 [btrfs]
create_pending_snapshot+0x9d7/0xe60 [btrfs]
create_pending_snapshots+0x94/0xb0 [btrfs]
btrfs_commit_transaction+0x415/0xa00 [btrfs]
btrfs_mksubvol+0x496/0x4e0 [btrfs]
btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs]
btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs]
btrfs_ioctl+0xa90/0x2b40 [btrfs]
do_vfs_ioctl+0xa9/0x6d0
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x1a/0x20
do_syscall_64+0x65/0x240
entry_SYSCALL_64_after_hwframe+0x49/0xbe
other info that might help us debug this:
Chain exists of:
&fs_info->qgroup_ioctl_lock#2 --> &fs_info->reloc_mutex --> &fs_info->tree_log_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&fs_info->tree_log_mutex);
lock(&fs_info->reloc_mutex);
lock(&fs_info->tree_log_mutex);
lock(&fs_info->qgroup_ioctl_lock#2);
*** DEADLOCK ***
6 locks held by btrfs/8631:
#0:
00000000ed8f23f6 (sb_writers#12){.+.+}, at: mnt_want_write_file+0x28/0x60
#1:
000000009fb1597a (&type->i_mutex_dir_key#10/1){+.+.}, at: btrfs_mksubvol+0x70/0x4e0 [btrfs]
#2:
0000000088c5ad88 (&fs_info->subvol_sem){++++}, at: btrfs_mksubvol+0x128/0x4e0 [btrfs]
#3:
000000009606fc3e (sb_internal#2){.+.+}, at: start_transaction+0x37a/0x520 [btrfs]
#4:
00000000f82bbdf5 (&fs_info->reloc_mutex){+.+.}, at: btrfs_commit_transaction+0x40d/0xa00 [btrfs]
#5:
000000003d52cc23 (&fs_info->tree_log_mutex){+.+.}, at: create_pending_snapshot+0x8b6/0xe60 [btrfs]
[CAUSE]
Due to the delayed subvolume creation, we need to call
btrfs_qgroup_inherit() inside commit transaction code, with a lot of
other mutex hold.
This hell of lock chain can lead to above problem.
[FIX]
On the other hand, we don't really need to hold qgroup_ioctl_lock if
we're in the context of create_pending_snapshot().
As in that context, we're the only one being able to modify qgroup.
All other qgroup functions which needs qgroup_ioctl_lock are either
holding a transaction handle, or will start a new transaction:
Functions will start a new transaction():
* btrfs_quota_enable()
* btrfs_quota_disable()
Functions hold a transaction handler:
* btrfs_add_qgroup_relation()
* btrfs_del_qgroup_relation()
* btrfs_create_qgroup()
* btrfs_remove_qgroup()
* btrfs_limit_qgroup()
* btrfs_qgroup_inherit() call inside create_subvol()
So we have a higher level protection provided by transaction, thus we
don't need to always hold qgroup_ioctl_lock in btrfs_qgroup_inherit().
Only the btrfs_qgroup_inherit() call in create_subvol() needs to hold
qgroup_ioctl_lock, while the btrfs_qgroup_inherit() call in
create_pending_snapshot() is already protected by transaction.
So the fix is to detect the context by checking
trans->transaction->state.
If we're at TRANS_STATE_COMMIT_DOING, then we're in commit transaction
context and no need to get the mutex.
Reported-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Sterba [Fri, 17 May 2019 09:43:13 +0000 (11:43 +0200)]
btrfs: fix minimum number of chunk errors for DUP
[ Upstream commit
0ee5f8ae082e1f675a2fb6db601c31ac9958a134 ]
The list of profiles in btrfs_chunk_max_errors lists DUP as a profile
DUP able to tolerate 1 device missing. Though this profile is special
with 2 copies, it still needs the device, unlike the others.
Looking at the history of changes, thre's no clear reason why DUP is
there, functions were refactored and blocks of code merged to one
helper.
d20983b40e828 Btrfs: fix writing data into the seed filesystem
- factor code to a helper
de11cc12df173 Btrfs: don't pre-allocate btrfs bio
- unrelated change, DUP still in the list with max errors 1
a236aed14ccb0 Btrfs: Deal with failed writes in mirrored configurations
- introduced the max errors, leaves DUP and RAID1 in the same group
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chunyan Zhang [Wed, 22 May 2019 01:15:03 +0000 (09:15 +0800)]
clk: sprd: Add check for return value of sprd_clk_regmap_init()
[ Upstream commit
c974c48deeb969c5e4250e4f06af91edd84b1f10 ]
sprd_clk_regmap_init() doesn't always return success, adding check
for its return value should make the code more strong.
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
[sboyd@kernel.org: Add a missing int ret]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Russell King [Tue, 4 Jun 2019 13:50:14 +0000 (14:50 +0100)]
fs/adfs: super: fix use-after-free bug
[ Upstream commit
5808b14a1f52554de612fee85ef517199855e310 ]
Fix a use-after-free bug during filesystem initialisation, where we
access the disc record (which is stored in a buffer) after we have
released the buffer.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
JC Kuo [Wed, 12 Jun 2019 03:14:34 +0000 (11:14 +0800)]
clk: tegra210: fix PLLU and PLLU_OUT1
[ Upstream commit
0d34dfbf3023cf119b83f6470692c0b10c832495 ]
Full-speed and low-speed USB devices do not work with Tegra210
platforms because of incorrect PLLU/PLLU_OUT1 clock settings.
When full-speed device is connected:
[ 14.059886] usb 1-3: new full-speed USB device number 2 using tegra-xusb
[ 14.196295] usb 1-3: device descriptor read/64, error -71
[ 14.436311] usb 1-3: device descriptor read/64, error -71
[ 14.675749] usb 1-3: new full-speed USB device number 3 using tegra-xusb
[ 14.812335] usb 1-3: device descriptor read/64, error -71
[ 15.052316] usb 1-3: device descriptor read/64, error -71
[ 15.164799] usb usb1-port3: attempt power cycle
When low-speed device is connected:
[ 37.610949] usb usb1-port3: Cannot enable. Maybe the USB cable is bad?
[ 38.557376] usb usb1-port3: Cannot enable. Maybe the USB cable is bad?
[ 38.564977] usb usb1-port3: attempt power cycle
This commit fixes the issue by:
1. initializing PLLU_OUT1 before initializing XUSB_FS_SRC clock
because PLLU_OUT1 is parent of XUSB_FS_SRC.
2. changing PLLU post-divider to /2 (DIVP=1) according to Technical
Reference Manual.
Fixes:
e745f992cf4b ("clk: tegra: Rework pll_u")
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Mon, 24 Jun 2019 12:38:18 +0000 (14:38 +0200)]
dmaengine: rcar-dmac: Reject zero-length slave DMA requests
[ Upstream commit
78efb76ab4dfb8f74f290ae743f34162cd627f19 ]
While the .device_prep_slave_sg() callback rejects empty scatterlists,
it still accepts single-entry scatterlists with a zero-length segment.
These may happen if a driver calls dmaengine_prep_slave_single() with a
zero len parameter. The corresponding DMA request will never complete,
leading to messages like:
rcar-dmac
e7300000.dma-controller: Channel Address Error happen
and DMA timeouts.
Although requesting a zero-length DMA request is a driver bug, rejecting
it early eases debugging. Note that the .device_prep_dma_memcpy()
callback already rejects requests to copy zero bytes.
Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Analyzed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Petr Cvek [Thu, 20 Jun 2019 21:39:37 +0000 (23:39 +0200)]
MIPS: lantiq: Fix bitfield masking
[ Upstream commit
ba1bc0fcdeaf3bf583c1517bd2e3e29cf223c969 ]
The modification of EXIN register doesn't clean the bitfield before
the writing of a new value. After a few modifications the bitfield would
accumulate only '1's.
Signed-off-by: Petr Cvek <petrcvekcz@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: hauke@hauke-m.de
Cc: john@phrozen.org
Cc: linux-mips@vger.kernel.org
Cc: openwrt-devel@lists.openwrt.org
Cc: pakahmar@hotmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jean-Philippe Brucker [Mon, 10 Jun 2019 17:38:29 +0000 (18:38 +0100)]
firmware/psci: psci_checker: Park kthreads before stopping them
[ Upstream commit
92e074acf6f7694e96204265eb18ac113f546e80 ]
Since commit
85f1abe0019f ("kthread, sched/wait: Fix kthread_parkme()
completion issue"), kthreads that are bound to a CPU must be parked
before being stopped. At the moment the PSCI checker calls
kthread_stop() directly on the suspend kthread, which triggers the
following warning:
[ 6.068288] WARNING: CPU: 1 PID: 1 at kernel/kthread.c:398 __kthread_bind_mask+0x20/0x78
...
[ 6.190151] Call trace:
[ 6.192566] __kthread_bind_mask+0x20/0x78
[ 6.196615] kthread_unpark+0x74/0x80
[ 6.200235] kthread_stop+0x44/0x1d8
[ 6.203769] psci_checker+0x3bc/0x484
[ 6.207389] do_one_initcall+0x48/0x260
[ 6.211180] kernel_init_freeable+0x2c8/0x368
[ 6.215488] kernel_init+0x10/0x100
[ 6.218935] ret_from_fork+0x10/0x1c
[ 6.222467] ---[ end trace
e05e22863d043cd3 ]---
kthread_unpark() tries to bind the thread to its CPU and aborts with a
WARN() if the thread wasn't in TASK_PARKED state. Park the kthreads
before stopping them.
Fixes:
85f1abe0019f ("kthread, sched/wait: Fix kthread_parkme() completion issue")
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Prarit Bhargava [Wed, 29 May 2019 11:26:25 +0000 (07:26 -0400)]
kernel/module.c: Only return -EEXIST for modules that have finished loading
[ Upstream commit
6e6de3dee51a439f76eb73c22ae2ffd2c9384712 ]
Microsoft HyperV disables the X86_FEATURE_SMCA bit on AMD systems, and
linux guests boot with repeated errors:
amd64_edac_mod: Unknown symbol amd_unregister_ecc_decoder (err -2)
amd64_edac_mod: Unknown symbol amd_register_ecc_decoder (err -2)
amd64_edac_mod: Unknown symbol amd_report_gart_errors (err -2)
amd64_edac_mod: Unknown symbol amd_unregister_ecc_decoder (err -2)
amd64_edac_mod: Unknown symbol amd_register_ecc_decoder (err -2)
amd64_edac_mod: Unknown symbol amd_report_gart_errors (err -2)
The warnings occur because the module code erroneously returns -EEXIST
for modules that have failed to load and are in the process of being
removed from the module list.
module amd64_edac_mod has a dependency on module edac_mce_amd. Using
modules.dep, systemd will load edac_mce_amd for every request of
amd64_edac_mod. When the edac_mce_amd module loads, the module has
state MODULE_STATE_UNFORMED and once the module load fails and the state
becomes MODULE_STATE_GOING. Another request for edac_mce_amd module
executes and add_unformed_module() will erroneously return -EEXIST even
though the previous instance of edac_mce_amd has MODULE_STATE_GOING.
Upon receiving -EEXIST, systemd attempts to load amd64_edac_mod, which
fails because of unknown symbols from edac_mce_amd.
add_unformed_module() must wait to return for any case other than
MODULE_STATE_LIVE to prevent a race between multiple loads of
dependent modules.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Barret Rhoden <brho@google.com>
Cc: David Arcari <darcari@redhat.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Helen Koike [Mon, 3 Jun 2019 14:22:15 +0000 (11:22 -0300)]
arm64: dts: rockchip: fix isp iommu clocks and power domain
[ Upstream commit
c432a29d3fc9ee928caeca2f5cf68b3aebfa6817 ]
isp iommu requires wrapper variants of the clocks.
noc variants are always on and using the wrapper variants will activate
{A,H}CLK_ISP{0,1} due to the hierarchy.
Tested using the pending isp patch set (which is not upstream
yet). Without this patch, streaming from the isp stalls.
Also add the respective power domain and remove the "disabled" status.
Refer:
RK3399 TRM v1.4 Fig. 2-4 RK3399 Clock Architecture Diagram
RK3399 TRM v1.4 Fig. 8-1 RK3399 Power Domain Partition
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Osipenko [Wed, 29 May 2019 21:43:55 +0000 (00:43 +0300)]
dmaengine: tegra-apb: Error out if DMA_PREP_INTERRUPT flag is unset
[ Upstream commit
dc161064beb83c668e0f85766b92b1e7ed186e58 ]
Apparently driver was never tested with DMA_PREP_INTERRUPT flag being
unset since it completely disables interrupt handling instead of skipping
the callbacks invocations, hence putting channel into unusable state.
The flag is always set by all of kernel drivers that use APB DMA, so let's
error out in otherwise case for consistency. It won't be difficult to
support that case properly if ever will be needed.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cheng Jian [Sat, 4 May 2019 11:39:39 +0000 (19:39 +0800)]
ftrace: Enable trampoline when rec count returns back to one
[ Upstream commit
a124692b698b00026a58d89831ceda2331b2e1d0 ]
Custom trampolines can only be enabled if there is only a single ops
attached to it. If there's only a single callback registered to a function,
and the ops has a trampoline registered for it, then we can call the
trampoline directly. This is very useful for improving the performance of
ftrace and livepatch.
If more than one callback is registered to a function, the general
trampoline is used, and the custom trampoline is not restored back to the
direct call even if all the other callbacks were unregistered and we are
back to one callback for the function.
To fix this, set FTRACE_FL_TRAMP flag if rec count is decremented
to one, and the ops that left has a trampoline.
Testing After this patch :
insmod livepatch_unshare_files.ko
cat /sys/kernel/debug/tracing/enabled_functions
unshare_files (1) R I tramp: 0xffffffffc0000000(klp_ftrace_handler+0x0/0xa0) ->ftrace_ops_assist_func+0x0/0xf0
echo unshare_files > /sys/kernel/debug/tracing/set_ftrace_filter
echo function > /sys/kernel/debug/tracing/current_tracer
cat /sys/kernel/debug/tracing/enabled_functions
unshare_files (2) R I ->ftrace_ops_list_func+0x0/0x150
echo nop > /sys/kernel/debug/tracing/current_tracer
cat /sys/kernel/debug/tracing/enabled_functions
unshare_files (1) R I tramp: 0xffffffffc0000000(klp_ftrace_handler+0x0/0xa0) ->ftrace_ops_assist_func+0x0/0xf0
Link: http://lkml.kernel.org/r/1556969979-111047-1-git-send-email-cj.chengjian@huawei.com
Signed-off-by: Cheng Jian <cj.chengjian@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Douglas Anderson [Tue, 21 May 2019 23:49:33 +0000 (16:49 -0700)]
ARM: dts: rockchip: Mark that the rk3288 timer might stop in suspend
[ Upstream commit
8ef1ba39a9fa53d2205e633bc9b21840a275908e ]
This is similar to commit
e6186820a745 ("arm64: dts: rockchip: Arch
counter doesn't tick in system suspend"). Specifically on the rk3288
it can be seen that the timer stops ticking in suspend if we end up
running through the "osc_disable" path in rk3288_slp_mode_set(). In
that path the 24 MHz clock will turn off and the timer stops.
To test this, I ran this on a Chrome OS filesystem:
before=$(date); \
suspend_stress_test -c1 --suspend_min=30 --suspend_max=31; \
echo ${before}; date
...and I found that unless I plug in a device that requests USB wakeup
to be active that the two calls to "date" would show that fewer than
30 seconds passed.
NOTE: deep suspend (where the 24 MHz clock gets disabled) isn't
supported yet on upstream Linux so this was tested on a downstream
kernel.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Douglas Anderson [Fri, 3 May 2019 23:45:37 +0000 (16:45 -0700)]
ARM: dts: rockchip: Make rk3288-veyron-mickey's emmc work again
[ Upstream commit
99fa066710f75f18f4d9a5bc5f6a711968a581d5 ]
When I try to boot rk3288-veyron-mickey I totally fail to make the
eMMC work. Specifically my logs (on Chrome OS 4.19):
mmc_host mmc1: card is non-removable.
mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
mmc1: switch to bus width 8 failed
mmc1: switch to bus width 4 failed
mmc1: new high speed MMC card at address 0001
mmcblk1: mmc1:0001 HAG2e 14.7 GiB
mmcblk1boot0: mmc1:0001 HAG2e partition 1 4.00 MiB
mmcblk1boot1: mmc1:0001 HAG2e partition 2 4.00 MiB
mmcblk1rpmb: mmc1:0001 HAG2e partition 3 4.00 MiB, chardev (243:0)
mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
mmc1: switch to bus width 8 failed
mmc1: switch to bus width 4 failed
mmc1: tried to HW reset card, got error -110
mmcblk1: error -110 requesting status
mmcblk1: recovery failed!
print_req_error: I/O error, dev mmcblk1, sector 0
...
When I remove the '/delete-property/mmc-hs200-1_8v' then everything is
hunky dory.
That line comes from the original submission of the mickey dts
upstream, so presumably at the time the HS200 was failing and just
enumerating things as a high speed device was fine. ...or maybe it's
just that some mickey devices work when enumerating at "high speed",
just not mine?
In any case, hs200 seems good now. Let's turn it on.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Douglas Anderson [Fri, 3 May 2019 23:41:42 +0000 (16:41 -0700)]
ARM: dts: rockchip: Make rk3288-veyron-minnie run at hs200
[ Upstream commit
1c0479023412ab7834f2e98b796eb0d8c627cd62 ]
As some point hs200 was failing on rk3288-veyron-minnie. See commit
984926781122 ("ARM: dts: rockchip: temporarily remove emmc hs200 speed
from rk3288 minnie"). Although I didn't track down exactly when it
started working, it seems to work OK now, so let's turn it back on.
To test this, I booted from SD card and then used this script to
stress the enumeration process after fixing a memory leak [1]:
cd /sys/bus/platform/drivers/dwmmc_rockchip
for i in $(seq 1 3000); do
echo "========================" $i
echo
ff0f0000.dwmmc > unbind
sleep .5
echo
ff0f0000.dwmmc > bind
while true; do
if [ -e /dev/mmcblk2 ]; then
break;
fi
sleep .1
done
done
It worked fine.
[1] https://lkml.kernel.org/r/
20190503233526.226272-1-dianders@chromium.org
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Russell King [Thu, 2 May 2019 16:19:18 +0000 (17:19 +0100)]
ARM: riscpc: fix DMA
[ Upstream commit
ffd9a1ba9fdb7f2bd1d1ad9b9243d34e96756ba2 ]
DMA got broken a while back in two different ways:
1) a change in the behaviour of disable_irq() to wait for the interrupt
to finish executing causes us to deadlock at the end of DMA.
2) a change to avoid modifying the scatterlist left the first transfer
uninitialised.
DMA is only used with expansion cards, so has gone unnoticed.
Fixes:
fa4e99899932 ("[ARM] dma: RiscPC: don't modify DMA SG entries")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Sun, 4 Aug 2019 07:30:58 +0000 (09:30 +0200)]
Linux 4.19.64
Xin Long [Mon, 17 Jun 2019 13:34:13 +0000 (21:34 +0800)]
ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULL
commit
5684abf7020dfc5f0b6ba1d68eda3663871fce52 upstream.
iptunnel_xmit() works as a common function, also used by a udp tunnel
which doesn't have to have a tunnel device, like how TIPC works with
udp media.
In these cases, we should allow not to count pkts on dev's tstats, so
that udp tunnel can work with no tunnel device safely.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Tommi Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bart Van Assche [Fri, 15 Mar 2019 23:27:58 +0000 (16:27 -0700)]
scsi: core: Avoid that a kernel warning appears during system resume
commit
17605afaae825b0291f80c62a7f6565879edaa8a upstream.
Since scsi_device_quiesce() skips SCSI devices that have another state than
RUNNING, OFFLINE or TRANSPORT_OFFLINE, scsi_device_resume() should not
complain about SCSI devices that have been skipped. Hence this patch. This
patch avoids that the following warning appears during resume:
WARNING: CPU: 3 PID: 1039 at blk_clear_pm_only+0x2a/0x30
CPU: 3 PID: 1039 Comm: kworker/u8:49 Not tainted 5.0.0+ #1
Hardware name: LENOVO 4180F42/4180F42, BIOS 83ET75WW (1.45 ) 05/10/2013
Workqueue: events_unbound async_run_entry_fn
RIP: 0010:blk_clear_pm_only+0x2a/0x30
Call Trace:
? scsi_device_resume+0x28/0x50
? scsi_dev_type_resume+0x2b/0x80
? async_run_entry_fn+0x2c/0xd0
? process_one_work+0x1f0/0x3f0
? worker_thread+0x28/0x3c0
? process_one_work+0x3f0/0x3f0
? kthread+0x10c/0x130
? __kthread_create_on_node+0x150/0x150
? ret_from_fork+0x1f/0x30
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Martin Steigerwald <martin@lichtvoll.de>
Cc: <stable@vger.kernel.org>
Reported-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Tested-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Fixes:
3a0a529971ec ("block, scsi: Make SCSI quiesce and resume work reliably") # v4.15
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bart Van Assche [Wed, 26 Sep 2018 21:01:04 +0000 (14:01 -0700)]
block, scsi: Change the preempt-only flag into a counter
commit
cd84a62e0078dce09f4ed349bec84f86c9d54b30 upstream.
The RQF_PREEMPT flag is used for three purposes:
- In the SCSI core, for making sure that power management requests
are executed even if a device is in the "quiesced" state.
- For domain validation by SCSI drivers that use the parallel port.
- In the IDE driver, for IDE preempt requests.
Rename "preempt-only" into "pm-only" because the primary purpose of
this mode is power management. Since the power management core may
but does not have to resume a runtime suspended device before
performing system-wide suspend and since a later patch will set
"pm-only" mode as long as a block device is runtime suspended, make
it possible to set "pm-only" mode from more than one context. Since
with this change scsi_device_quiesce() is no longer idempotent, make
that function return early if it is called for a quiesced queue.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yan, Zheng [Thu, 23 May 2019 03:01:37 +0000 (11:01 +0800)]
ceph: hold i_ceph_lock when removing caps for freeing inode
commit
d6e47819721ae2d9d090058ad5570a66f3c42e39 upstream.
ceph_d_revalidate(, LOOKUP_RCU) may call __ceph_caps_issued_mask()
on a freeing inode.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yoshinori Sato [Sun, 21 Apr 2019 13:53:58 +0000 (22:53 +0900)]
Fix allyesconfig output.
commit
1b496469d0c020e09124e03e66a81421c21272a7 upstream.
Conflict JCore-SoC and SolutionEngine 7619.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miroslav Lichvar [Tue, 16 Jul 2019 23:30:09 +0000 (16:30 -0700)]
drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctl
commit
5515e9a6273b8c02034466bcbd717ac9f53dab99 upstream.
The PPS assert/clear offset corrections are set by the PPS_SETPARAMS
ioctl in the pps_ktime structs, which also contain flags. The flags are
not initialized by applications (using the timepps.h header) and they
are not used by the kernel for anything except returning them back in
the PPS_GETPARAMS ioctl.
Set the flags to zero to make it clear they are unused and avoid leaking
uninitialized data of the PPS_SETPARAMS caller to other applications
that have a read access to the PPS device.
Link: http://lkml.kernel.org/r/20190702092251.24303-1-mlichvar@redhat.com
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Cc: Greg KH <greg@kroah.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sat, 13 Jul 2019 21:27:14 +0000 (14:27 -0700)]
/proc/<pid>/cmdline: add back the setproctitle() special case
commit
d26d0cd97c88eb1a5704b42e41ab443406807810 upstream.
This makes the setproctitle() special case very explicit indeed, and
handles it with a separate helper function entirely. In the process, it
re-instates the original semantics of simply stopping at the first NUL
character when the original last NUL character is no longer there.
[ The original semantics can still be seen in mm/util.c: get_cmdline()
that is limited to a fixed-size buffer ]
This makes the logic about when we use the string lengths etc much more
obvious, and makes it easier to see what we do and what the two very
different cases are.
Note that even when we allow walking past the end of the argument array
(because the setproctitle() might have overwritten and overflowed the
original argv[] strings), we only allow it when it overflows into the
environment region if it is immediately adjacent.
[ Fixed for missing 'count' checks noted by Alexey Izbyshev ]
Link: https://lore.kernel.org/lkml/alpine.LNX.2.21.1904052326230.3249@kich.toxcorp.com/
Fixes:
5ab827189965 ("fs/proc: simplify and clarify get_mm_cmdline() function")
Cc: Jakub Jankowski <shasta@toxcorp.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alexey Izbyshev <izbyshev@ispras.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sat, 13 Jul 2019 20:40:13 +0000 (13:40 -0700)]
/proc/<pid>/cmdline: remove all the special cases
commit
3d712546d8ba9f25cdf080d79f90482aa4231ed4 upstream.
Start off with a clean slate that only reads exactly from arg_start to
arg_end, without any oddities. This simplifies the code and in the
process removes the case that caused us to potentially leak an
uninitialized byte from the temporary kernel buffer.
Note that in order to start from scratch with an understandable base,
this simplifies things _too_ much, and removes all the legacy logic to
handle setproctitle() having changed the argument strings.
We'll add back those special cases very differently in the next commit.
Link: https://lore.kernel.org/lkml/20190712160913.17727-1-izbyshev@ispras.ru/
Fixes:
f5b65348fd77 ("proc: fix missing final NUL in get_mm_cmdline() rewrite")
Cc: Alexey Izbyshev <izbyshev@ispras.ru>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jann Horn [Tue, 16 Jul 2019 15:20:47 +0000 (17:20 +0200)]
sched/fair: Use RCU accessors consistently for ->numa_group
commit
cb361d8cdef69990f6b4504dc1fd9a594d983c97 upstream.
The old code used RCU annotations and accessors inconsistently for
->numa_group, which can lead to use-after-frees and NULL dereferences.
Let all accesses to ->numa_group use proper RCU helpers to prevent such
issues.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Fixes:
8c8a743c5087 ("sched/numa: Use {cpu, pid} to create task groups for shared faults")
Link: https://lkml.kernel.org/r/20190716152047.14424-3-jannh@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jann Horn [Tue, 16 Jul 2019 15:20:45 +0000 (17:20 +0200)]
sched/fair: Don't free p->numa_faults with concurrent readers
commit
16d51a590a8ce3befb1308e0e7ab77f3b661af33 upstream.
When going through execve(), zero out the NUMA fault statistics instead of
freeing them.
During execve, the task is reachable through procfs and the scheduler. A
concurrent /proc/*/sched reader can read data from a freed ->numa_faults
allocation (confirmed by KASAN) and write it back to userspace.
I believe that it would also be possible for a use-after-free read to occur
through a race between a NUMA fault and execve(): task_numa_fault() can
lead to task_numa_compare(), which invokes task_weight() on the currently
running task of a different CPU.
Another way to fix this would be to make ->numa_faults RCU-managed or add
extra locking, but it seems easier to wipe the NUMA fault statistics on
execve.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Fixes:
82727018b0d3 ("sched/numa: Call task_numa_free() from do_execve()")
Link: https://lkml.kernel.org/r/20190716152047.14424-1-jannh@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Wang [Fri, 17 May 2019 04:29:52 +0000 (00:29 -0400)]
vhost: scsi: add weight support
commit
c1ea02f15ab5efb3e93fc3144d895410bf79fcf2 upstream.
This patch will check the weight and exit the loop if we exceeds the
weight. This is useful for preventing scsi kthread from hogging cpu
which is guest triggerable.
This addresses CVE-2019-3900.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Fixes:
057cbf49a1f0 ("tcm_vhost: Initial merge for vhost level target fabric driver")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[jwang: backport to 4.19]
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Wang [Fri, 17 May 2019 04:29:51 +0000 (00:29 -0400)]
vhost: vsock: add weight support
commit
e79b431fb901ba1106670bcc80b9b617b25def7d upstream.
This patch will check the weight and exit the loop if we exceeds the
weight. This is useful for preventing vsock kthread from hogging cpu
which is guest triggerable. The weight can help to avoid starving the
request from on direction while another direction is being processed.
The value of weight is picked from vhost-net.
This addresses CVE-2019-3900.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Fixes:
433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Wang [Fri, 17 May 2019 04:29:50 +0000 (00:29 -0400)]
vhost_net: fix possible infinite loop
commit
e2412c07f8f3040593dfb88207865a3cd58680c0 upstream.
When the rx buffer is too small for a packet, we will discard the vq
descriptor and retry it for the next packet:
while ((sock_len = vhost_net_rx_peek_head_len(net, sock->sk,
&busyloop_intr))) {
...
/* On overrun, truncate and discard */
if (unlikely(headcount > UIO_MAXIOV)) {
iov_iter_init(&msg.msg_iter, READ, vq->iov, 1, 1);
err = sock->ops->recvmsg(sock, &msg,
1, MSG_DONTWAIT | MSG_TRUNC);
pr_debug("Discarded rx packet: len %zd\n", sock_len);
continue;
}
...
}
This makes it possible to trigger a infinite while..continue loop
through the co-opreation of two VMs like:
1) Malicious VM1 allocate 1 byte rx buffer and try to slow down the
vhost process as much as possible e.g using indirect descriptors or
other.
2) Malicious VM2 generate packets to VM1 as fast as possible
Fixing this by checking against weight at the end of RX and TX
loop. This also eliminate other similar cases when:
- userspace is consuming the packets in the meanwhile
- theoretical TOCTOU attack if guest moving avail index back and forth
to hit the continue after vhost find guest just add new buffers
This addresses CVE-2019-3900.
Fixes:
d8316f3991d20 ("vhost: fix total length when packets are too short")
Fixes:
3a4d5c94e9593 ("vhost_net: a kernel-level virtio server")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
[jwang: backport to 4.19]
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Wang [Fri, 17 May 2019 04:29:49 +0000 (00:29 -0400)]
vhost: introduce vhost_exceeds_weight()
commit
e82b9b0727ff6d665fff2d326162b460dded554d upstream.
We used to have vhost_exceeds_weight() for vhost-net to:
- prevent vhost kthread from hogging the cpu
- balance the time spent between TX and RX
This function could be useful for vsock and scsi as well. So move it
to vhost.c. Device must specify a weight which counts the number of
requests, or it can also specific a byte_weight which counts the
number of bytes that has been processed.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
[jwang: backport to 4.19, fix conflict in net.c]
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vladis Dronov [Tue, 30 Jul 2019 09:33:45 +0000 (11:33 +0200)]
Bluetooth: hci_uart: check for missing tty operations
commit
b36a1552d7319bbfd5cf7f08726c23c5c66d4f73 upstream.
Certain ttys operations (pty_unix98_ops) lack tiocmget() and tiocmset()
functions which are called by the certain HCI UART protocols (hci_ath,
hci_bcm, hci_intel, hci_mrvl, hci_qca) via hci_uart_set_flow_control()
or directly. This leads to an execution at NULL and can be triggered by
an unprivileged user. Fix this by adding a helper function and a check
for the missing tty operations in the protocols code.
This fixes CVE-2019-10207. The Fixes: lines list commits where calls to
tiocm[gs]et() or hci_uart_set_flow_control() were added to the HCI UART
protocols.
Link: https://syzkaller.appspot.com/bug?id=1b42faa2848963564a5b1b7f8c837ea7b55ffa50
Reported-by: syzbot+79337b501d6aa974d0f6@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org # v2.6.36+
Fixes:
b3190df62861 ("Bluetooth: Support for Atheros AR300x serial chip")
Fixes:
118612fb9165 ("Bluetooth: hci_bcm: Add suspend/resume PM functions")
Fixes:
ff2895592f0f ("Bluetooth: hci_intel: Add Intel baudrate configuration support")
Fixes:
162f812f23ba ("Bluetooth: hci_uart: Add Marvell support")
Fixes:
fa9ad876b8e0 ("Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990")
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Yu-Chen, Cho <acho@suse.com>
Tested-by: Yu-Chen, Cho <acho@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joerg Roedel [Tue, 23 Jul 2019 07:51:00 +0000 (09:51 +0200)]
iommu/iova: Fix compilation error with !CONFIG_IOMMU_IOVA
commit
201c1db90cd643282185a00770f12f95da330eca upstream.
The stub function for !CONFIG_IOMMU_IOVA needs to be
'static inline'.
Fixes:
effa467870c76 ('iommu/vt-d: Don't queue_iova() if there is no flush queue')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Safonov [Tue, 16 Jul 2019 21:38:05 +0000 (22:38 +0100)]
iommu/vt-d: Don't queue_iova() if there is no flush queue
commit
effa467870c7612012885df4e246bdb8ffd8e44c upstream.
Intel VT-d driver was reworked to use common deferred flushing
implementation. Previously there was one global per-cpu flush queue,
afterwards - one per domain.
Before deferring a flush, the queue should be allocated and initialized.
Currently only domains with IOMMU_DOMAIN_DMA type initialize their flush
queue. It's probably worth to init it for static or unmanaged domains
too, but it may be arguable - I'm leaving it to iommu folks.
Prevent queuing an iova flush if the domain doesn't have a queue.
The defensive check seems to be worth to keep even if queue would be
initialized for all kinds of domains. And is easy backportable.
On 4.19.43 stable kernel it has a user-visible effect: previously for
devices in si domain there were crashes, on sata devices:
BUG: spinlock bad magic on CPU#6, swapper/0/1
lock: 0xffff88844f582008, .magic:
00000000, .owner: <none>/-1, .owner_cpu: 0
CPU: 6 PID: 1 Comm: swapper/0 Not tainted 4.19.43 #1
Call Trace:
<IRQ>
dump_stack+0x61/0x7e
spin_bug+0x9d/0xa3
do_raw_spin_lock+0x22/0x8e
_raw_spin_lock_irqsave+0x32/0x3a
queue_iova+0x45/0x115
intel_unmap+0x107/0x113
intel_unmap_sg+0x6b/0x76
__ata_qc_complete+0x7f/0x103
ata_qc_complete+0x9b/0x26a
ata_qc_complete_multiple+0xd0/0xe3
ahci_handle_port_interrupt+0x3ee/0x48a
ahci_handle_port_intr+0x73/0xa9
ahci_single_level_irq_intr+0x40/0x60
__handle_irq_event_percpu+0x7f/0x19a
handle_irq_event_percpu+0x32/0x72
handle_irq_event+0x38/0x56
handle_edge_irq+0x102/0x121
handle_irq+0x147/0x15c
do_IRQ+0x66/0xf2
common_interrupt+0xf/0xf
RIP: 0010:__do_softirq+0x8c/0x2df
The same for usb devices that use ehci-pci:
BUG: spinlock bad magic on CPU#0, swapper/0/1
lock: 0xffff88844f402008, .magic:
00000000, .owner: <none>/-1, .owner_cpu: 0
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.43 #4
Call Trace:
<IRQ>
dump_stack+0x61/0x7e
spin_bug+0x9d/0xa3
do_raw_spin_lock+0x22/0x8e
_raw_spin_lock_irqsave+0x32/0x3a
queue_iova+0x77/0x145
intel_unmap+0x107/0x113
intel_unmap_page+0xe/0x10
usb_hcd_unmap_urb_setup_for_dma+0x53/0x9d
usb_hcd_unmap_urb_for_dma+0x17/0x100
unmap_urb_for_dma+0x22/0x24
__usb_hcd_giveback_urb+0x51/0xc3
usb_giveback_urb_bh+0x97/0xde
tasklet_action_common.isra.4+0x5f/0xa1
tasklet_action+0x2d/0x30
__do_softirq+0x138/0x2df
irq_exit+0x7d/0x8b
smp_apic_timer_interrupt+0x10f/0x151
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:_raw_spin_unlock_irqrestore+0x17/0x39
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: <stable@vger.kernel.org> # 4.14+
Fixes:
13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
[v4.14-port notes:
o minor conflict with untrusted IOMMU devices check under if-condition]
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luke Nowakowski-Krijger [Sat, 22 Jun 2019 01:04:38 +0000 (21:04 -0400)]
media: radio-raremono: change devm_k*alloc to k*alloc
commit
c666355e60ddb4748ead3bdd983e3f7f2224aaf0 upstream.
Change devm_k*alloc to k*alloc to manually allocate memory
The manual allocation and freeing of memory is necessary because when
the USB radio is disconnected, the memory associated with devm_k*alloc
is freed. Meaning if we still have unresolved references to the radio
device, then we get use-after-free errors.
This patch fixes this by manually allocating memory, and freeing it in
the v4l2.release callback that gets called when the last radio device
exits.
Reported-and-tested-by: syzbot+a4387f5b6b799f6becbf@syzkaller.appspotmail.com
Signed-off-by: Luke Nowakowski-Krijger <lnowakow@eng.ucsd.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: cleaned up two small checkpatch.pl warnings]
[hverkuil-cisco@xs4all.nl: prefix subject with driver name]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Coddington [Tue, 11 Jun 2019 16:57:52 +0000 (12:57 -0400)]
NFS: Cleanup if nfs_match_client is interrupted
commit
9f7761cf0409465075dadb875d5d4b8ef2f890c8 upstream.
Don't bail out before cleaning up a new allocation if the wait for
searching for a matching nfs client is interrupted. Memory leaks.
Reported-by: syzbot+7fe11b49c1cc30e3fce2@syzkaller.appspotmail.com
Fixes:
950a578c6128 ("NFS: make nfs_match_client killable")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrey Konovalov [Thu, 2 May 2019 16:09:26 +0000 (12:09 -0400)]
media: pvrusb2: use a different format for warnings
commit
1753c7c4367aa1201e1e5d0a601897ab33444af1 upstream.
When the pvrusb2 driver detects that there's something wrong with the
device, it prints a warning message. Right now those message are
printed in two different formats:
1. ***WARNING*** message here
2. WARNING: message here
There's an issue with the second format. Syzkaller recognizes it as a
message produced by a WARN_ON(), which is used to indicate a bug in the
kernel. However pvrusb2 prints those warnings to indicate an issue with
the device, not the bug in the kernel.
This patch changes the pvrusb2 driver to consistently use the first
warning message format. This will unblock syzkaller testing of this
driver.
Reported-by: syzbot+af8f8d2ac0d39b0ed3a0@syzkaller.appspotmail.com
Reported-by: syzbot+170a86bf206dd2c6217e@syzkaller.appspotmail.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oliver Neukum [Thu, 9 May 2019 08:57:09 +0000 (04:57 -0400)]
media: cpia2_usb: first wake up, then free in disconnect
commit
eff73de2b1600ad8230692f00bc0ab49b166512a upstream.
Kasan reported a use after free in cpia2_usb_disconnect()
It first freed everything and then woke up those waiting.
The reverse order is correct.
Fixes:
6c493f8b28c67 ("[media] cpia2: major overhaul to get it in a working state again")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: syzbot+0c90fc937c84f97d0aa6@syzkaller.appspotmail.com
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabio Estevam [Thu, 9 May 2019 12:15:00 +0000 (09:15 -0300)]
ath10k: Change the warning message string
commit
265df32eae5845212ad9f55f5ae6b6dcb68b187b upstream.
The "WARNING" string confuses syzbot, which thinks it found
a crash [1].
Change the string to avoid such problem.
[1] https://lkml.org/lkml/2019/5/9/243
Reported-by: syzbot+c1b25598aa60dcd47e78@syzkaller.appspotmail.com
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Young [Sun, 19 May 2019 19:28:22 +0000 (15:28 -0400)]
media: au0828: fix null dereference in error path
commit
6d0d1ff9ff21fbb06b867c13a1d41ce8ddcd8230 upstream.
au0828_usb_disconnect() gets the au0828_dev struct via usb_get_intfdata,
so it needs to set up for the error paths.
Reported-by: syzbot+357d86bcb4cca1a2f572@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Phong Tran [Mon, 15 Jul 2019 15:08:14 +0000 (22:08 +0700)]
ISDN: hfcsusb: checking idx of ep configuration
commit
f384e62a82ba5d85408405fdd6aeff89354deaa9 upstream.
The syzbot test with random endpoint address which made the idx is
overflow in the table of endpoint configuations.
this adds the checking for fixing the error report from
syzbot
KASAN: stack-out-of-bounds Read in hfcsusb_probe [1]
The patch tested by syzbot [2]
Reported-by: syzbot+8750abbc3a46ef47d509@syzkaller.appspotmail.com
[1]:
https://syzkaller.appspot.com/bug?id=
30a04378dac680c5d521304a00a86156bb913522
[2]:
https://groups.google.com/d/msg/syzkaller-bugs/_6HBdge8F3E/OJn7wVNpBAAJ
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Todd Kjos [Wed, 12 Jun 2019 20:29:27 +0000 (13:29 -0700)]
binder: fix possible UAF when freeing buffer
commit
a370003cc301d4361bae20c9ef615f89bf8d1e8a upstream.
There is a race between the binder driver cleaning
up a completed transaction via binder_free_transaction()
and a user calling binder_ioctl(BC_FREE_BUFFER) to
release a buffer. It doesn't matter which is first but
they need to be protected against running concurrently
which can result in a UAF.
Signed-off-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Wed, 5 Sep 2018 14:34:43 +0000 (15:34 +0100)]
arm64: compat: Provide definition for COMPAT_SIGMINSTKSZ
commit
24951465cbd279f60b1fdc2421b3694405bcff42 upstream.
arch/arm/ defines a SIGMINSTKSZ of 2k, so we should use the same value
for compat tasks.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Reported-by: Steve McIntyre <steve.mcintyre@arm.com>
Tested-by: Steve McIntyre <93sam@debian.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Minas Harutyunyan [Mon, 10 Dec 2018 14:09:32 +0000 (18:09 +0400)]
usb: dwc2: Fix disable all EP's on disconnect
commit
4fe4f9fecc36956fd53c8edf96dd0c691ef98ff9 upstream.
Disabling all EP's allow to reset EP's to initial state.
Introduced new function dwc2_hsotg_ep_disable_lock() which
before calling dwc2_hsotg_ep_disable() function acquire
hsotg->lock and release on exiting.
From dwc2_hsotg_ep_disable() function removed acquiring
hsotg->lock.
In dwc2_hsotg_core_init_disconnected() function when USB
reset interrupt asserted disabling all ep’s by
dwc2_hsotg_ep_disable() function.
This updates eliminating sparse imbalance warnings.
Reverted changes in dwc2_hostg_disconnect() function.
Introduced new function dwc2_hsotg_ep_disable_lock().
Changed dwc2_hsotg_ep_ops. Now disable point to
dwc2_hsotg_ep_disable_lock() function.
In functions dwc2_hsotg_udc_stop() and dwc2_hsotg_suspend()
dwc2_hsotg_ep_disable() function replaced by
dwc2_hsotg_ep_disable_lock() function.
In dwc2_hsotg_ep_disable() function removed acquiring
of hsotg->lock.
Fixes:
dccf1bad4be7 ("usb: dwc2: Disable all EP's on disconnect")
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Minas Harutyunyan [Wed, 19 Sep 2018 14:13:52 +0000 (18:13 +0400)]
usb: dwc2: Disable all EP's on disconnect
commit
dccf1bad4be7eaa096c1f3697bd37883f9a08ecb upstream.
Disabling all EP's allow to reset EP's to initial state.
On disconnect disable all EP's instead of just killing
all requests. Because of some platform didn't catch
disconnect event, same stuff added to
dwc2_hsotg_core_init_disconnected() function when USB
reset detected on the bus.
Changed from version 1:
Changed lock acquire flow in dwc2_hsotg_ep_disable()
function.
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trond Myklebust [Fri, 28 Sep 2018 16:42:51 +0000 (12:42 -0400)]
NFSv4: Fix lookup revalidate of regular files
commit
c7944ebb9ce9461079659e9e6ec5baaf73724b3b upstream.
If we're revalidating an existing dentry in order to open a file, we need
to ensure that we check the directory has not changed before we optimise
away the lookup.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Qian Lu <luqia@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trond Myklebust [Fri, 28 Sep 2018 13:04:05 +0000 (09:04 -0400)]
NFS: Refactor nfs_lookup_revalidate()
commit
5ceb9d7fdaaf6d8ced6cd7861cf1deb9cd93fa47 upstream.
Refactor the code in nfs_lookup_revalidate() as a stepping stone towards
optimising and fixing nfs4_lookup_revalidate().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Qian Lu <luqia@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trond Myklebust [Thu, 27 Sep 2018 21:12:33 +0000 (17:12 -0400)]
NFS: Fix dentry revalidation on NFSv4 lookup
commit
be189f7e7f03de35887e5a85ddcf39b91b5d7fc1 upstream.
We need to ensure that inode and dentry revalidation occurs correctly
on reopen of a file that is already open. Currently, we can end up
not revalidating either in the case of NFSv4.0, due to the 'cached open'
path.
Let's fix that by ensuring that we only do cached open for the special
cases of open recovery and delegation return.
Reported-by: Stan Hu <stanhu@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Qian Lu <luqia@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sunil Muthuswamy [Thu, 13 Jun 2019 03:52:27 +0000 (03:52 +0000)]
vsock: correct removal of socket from the list
commit
d5afa82c977ea06f7119058fa0eb8519ea501031 upstream.
The current vsock code for removal of socket from the list is both
subject to race and inefficient. It takes the lock, checks whether
the socket is in the list, drops the lock and if the socket was on the
list, deletes it from the list. This is subject to race because as soon
as the lock is dropped once it is checked for presence, that condition
cannot be relied upon for any decision. It is also inefficient because
if the socket is present in the list, it takes the lock twice.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sunil Muthuswamy [Wed, 15 May 2019 00:56:05 +0000 (00:56 +0000)]
hv_sock: Add support for delayed close
commit
a9eeb998c28d5506616426bd3a216bd5735a18b8 upstream.
Currently, hvsock does not implement any delayed or background close
logic. Whenever the hvsock socket is closed, a FIN is sent to the peer, and
the last reference to the socket is dropped, which leads to a call to
.destruct where the socket can hang indefinitely waiting for the peer to
close it's side. The can cause the user application to hang in the close()
call.
This change implements proper STREAM(TCP) closing handshake mechanism by
sending the FIN to the peer and the waiting for the peer's FIN to arrive
for a given timeout. On timeout, it will try to terminate the connection
(i.e. a RST). This is in-line with other socket providers such as virtio.
This change does not address the hang in the vmbus_hvsock_device_unregister
where it waits indefinitely for the host to rescind the channel. That
should be taken up as a separate fix.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 31 Jul 2019 05:27:12 +0000 (07:27 +0200)]
Linux 4.19.63
Linus Torvalds [Thu, 11 Jul 2019 16:54:40 +0000 (09:54 -0700)]
access: avoid the RCU grace period for the temporary subjective credentials
commit
d7852fbd0f0423937fa287a598bfde188bb68c22 upstream.
It turns out that 'access()' (and 'faccessat()') can cause a lot of RCU
work because it installs a temporary credential that gets allocated and
freed for each system call.
The allocation and freeing overhead is mostly benign, but because
credentials can be accessed under the RCU read lock, the freeing
involves a RCU grace period.
Which is not a huge deal normally, but if you have a lot of access()
calls, this causes a fair amount of seconday damage: instead of having a
nice alloc/free patterns that hits in hot per-CPU slab caches, you have
all those delayed free's, and on big machines with hundreds of cores,
the RCU overhead can end up being enormous.
But it turns out that all of this is entirely unnecessary. Exactly
because access() only installs the credential as the thread-local
subjective credential, the temporary cred pointer doesn't actually need
to be RCU free'd at all. Once we're done using it, we can just free it
synchronously and avoid all the RCU overhead.
So add a 'non_rcu' flag to 'struct cred', which can be set by users that
know they only use it in non-RCU context (there are other potential
users for this). We can make it a union with the rcu freeing list head
that we need for the RCU case, so this doesn't need any extra storage.
Note that this also makes 'get_current_cred()' clear the new non_rcu
flag, in case we have filesystems that take a long-term reference to the
cred and then expect the RCU delayed freeing afterwards. It's not
entirely clear that this is required, but it makes for clear semantics:
the subjective cred remains non-RCU as long as you only access it
synchronously using the thread-local accessors, but you _can_ use it as
a generic cred if you want to.
It is possible that we should just remove the whole RCU markings for
->cred entirely. Only ->real_cred is really supposed to be accessed
through RCU, and the long-term cred copies that nfs uses might want to
explicitly re-enable RCU freeing if required, rather than have
get_current_cred() do it implicitly.
But this is a "minimal semantic changes" change for the immediate
problem.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jan Glauber <jglauber@marvell.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Jayachandran Chandrasekharan Nair <jnair@marvell.com>
Cc: Greg KH <greg@kroah.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Williams [Thu, 18 Jul 2019 01:08:15 +0000 (18:08 -0700)]
libnvdimm/bus: Stop holding nvdimm_bus_list_mutex over __nd_ioctl()
commit
b70d31d054ee3a6fc1034b9d7fc0ae1e481aa018 upstream.
In preparation for fixing a deadlock between wait_for_bus_probe_idle()
and the nvdimm_bus_list_mutex arrange for __nd_ioctl() without
nvdimm_bus_list_mutex held. This also unifies the 'dimm' and 'bus' level
ioctls into a common nd_ioctl() preamble implementation.
Marked for -stable as it is a pre-requisite for a follow-on fix.
Cc: <stable@vger.kernel.org>
Fixes:
bf9bccc14c05 ("libnvdimm: pmem label sets and namespace instantiation")
Cc: Vishal Verma <vishal.l.verma@intel.com>
Tested-by: Jane Chu <jane.chu@oracle.com>
Link: https://lore.kernel.org/r/156341209518.292348.7183897251740665198.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / platform / kernel / linux-rpi.git / log