Marcel Ziswiler [Fri, 11 Sep 2009 11:50:33 +0000 (07:50 -0400)]
mpc8260: remove Ethernet node fixup to use generic FDT code.
Remove Ethernet node fixup from mgcoge and muas3001 boards and modify its
configs for the common mpc8260 code to use generic Ethernet fixup.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>
Tested-by: Heiko Schocher <hs@denx.de>
Mike Frysinger [Wed, 9 Sep 2009 16:20:21 +0000 (12:20 -0400)]
tools/netconsole: use ncb automatically if available
The standard netcat, while ubiquitous, doesn't handle broadcast udp packets
properly. The local ncb util does however. So if ncb can be located in
the standard locations, automatically use that instead.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 9 Sep 2009 16:20:20 +0000 (12:20 -0400)]
tools/netconsole: make a bit more robust
The netcat utility likes to exit when it receives an empty packet (as it
thinks this means EOF). This can easily occur when working with command
line editing as this behavior will be triggered when using backspace. Or
with tabs and command line completion. So create two netcat processes -
one to only listen (and put it into a loop), and one to do the sending.
Once the user quits the transmitting netcat, the listening one will be
killed automatically.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Simon Kagstrom [Mon, 24 Aug 2009 07:10:16 +0000 (09:10 +0200)]
arm: Define test_and_set_bit and test_and_clear bit for ARM
Needed for (e.g.) ubifs support to work.
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Simon Kagstrom [Mon, 24 Aug 2009 07:10:12 +0000 (09:10 +0200)]
Define ffs/fls for all architectures
UBIFS requires fls(), which is not defined for arm (and some other
architectures) and this patch adds it. The implementation is taken from
Linux and is generic. ffs() is also defined for those that miss it.
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Simon Kagstrom [Mon, 24 Aug 2009 07:10:03 +0000 (09:10 +0200)]
arm: Make arm bitops endianness-independent
Bring over the bitop implementations from the Linux
include/asm-generic/bitops/non-atomic.h to provide
endianness-independence.
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Simon Kagstrom [Mon, 24 Aug 2009 07:09:50 +0000 (09:09 +0200)]
Move __set/clear_bit from ubifs.h to bitops.h
__set_bit and __clear_bit are defined in ubifs.h as well as in
asm/include/bitops.h for some architectures. This patch moves
the generic implementation to include/linux/bitops.h and uses
that unless it's defined by the architecture.
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Mike Frysinger [Fri, 4 Sep 2009 23:54:45 +0000 (19:54 -0400)]
standalone: convert to kbuild style
Clean up the arch/cpu/board/config checks as well as redundant setting of
srec/bin variables by using the kbuild VAR-$(...) style.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Wolfgang Denk [Tue, 15 Sep 2009 20:12:31 +0000 (22:12 +0200)]
mkconfig: split the board make target to multiple config targets
To simplify the top level makefile it useful to be able to parse
the top level makefile target to multiple individual target, then
put them to the config.h, leave the board config file to handle
the different targets.
Note that this method uses the '_'(underline) as the delimiter when
splits the board make target.
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
This also reverts commit
511c02f611cb5afa1b8ca5980caaaabaa0de377f.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Tue, 15 Sep 2009 19:45:50 +0000 (21:45 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-microblaze
Wolfgang Denk [Tue, 15 Sep 2009 19:43:25 +0000 (21:43 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx
Wolfgang Denk [Fri, 11 Sep 2009 09:30:34 +0000 (11:30 +0200)]
board/amcc/common/flash.c: Fix compile warning
Fix warning: ../common/flash.c:917: warning: dereferencing type-punned
pointer will break strict-aliasing rules
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Fri, 11 Sep 2009 09:47:07 +0000 (11:47 +0200)]
board/amcc/yucca/flash.c: Fix compile warning
Fix warning: flash.c:919: warning: dereferencing type-punned pointer
will break strict-aliasing rules
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Fri, 11 Sep 2009 09:44:39 +0000 (11:44 +0200)]
board/amcc/taihu/flash.c: Fix compile warning
Fix warnings:
flash.c: In function 'write_word_1':
flash.c:696: warning: dereferencing type-punned pointer will break strict-aliasing rules
flash.c: In function 'write_word_2':
flash.c:1044: warning: dereferencing type-punned pointer will break strict-aliasing rules
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Fri, 11 Sep 2009 09:37:20 +0000 (11:37 +0200)]
board/etin/debris/phantom.c: Fix compile error
Fix build problem caused by commit
e84aba13: "Replace BCD2BIN and
BIN2BCD macros with inline functions"
phantom.c:163: error: redefinition of 'bcd2bin'
/home/wd/git/u-boot/work/include/bcd.h:16: error: previous definition of 'bcd2bin' was here
phantom.c:168: error: redefinition of 'bin2bcd'
/home/wd/git/u-boot/work/include/bcd.h:21: error: previous definition of 'bin2bcd' was here
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Sangmoon Kim <dogoil@etinsys.com>
Wolfgang Denk [Fri, 11 Sep 2009 09:28:21 +0000 (11:28 +0200)]
board/dave/common/flash.c: fix compile warning
Fix warning: ../common/flash.c:668: warning: dereferencing type-punned
pointer will break strict-aliasing rules
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Andrea Marson <andrea.marson@dave-tech.it>
Wolfgang Denk [Fri, 11 Sep 2009 09:15:31 +0000 (11:15 +0200)]
board/esd/cpci750/ide.c: fix compile warning
Fix warning: ide.c:54: warning: dereferencing type-punned pointer will
break strict-aliasing rules
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Cc: Stefan Roese <sr@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Fri, 11 Sep 2009 08:13:26 +0000 (10:13 +0200)]
board/esd/common/flash.c: Fix compile warning
Fix warning: ../common/flash.c:635: warning: dereferencing type-punned
pointer will break strict-aliasing rules
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Cc: Stefan Roese <sr@denx.de>
Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Acked-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Fri, 11 Sep 2009 07:36:31 +0000 (09:36 +0200)]
sk98lin: fix compile warnings
Fix warnings:
skge.c: In function 'BoardInitMem':
skge.c:1389: warning: dereferencing type-punned pointer will break strict-aliasing rules
skge.c:1390: warning: dereferencing type-punned pointer will break strict-aliasing rules
skge.c:1391: warning: dereferencing type-punned pointer will break strict-aliasing rules
skgesirq.c: In function 'SkGePortCheckUpXmac':
skgesirq.c:1301: warning: dereferencing type-punned pointer will break strict-aliasing rules
skgesirq.c:1301: warning: dereferencing type-punned pointer will break strict-aliasing rules
skgesirq.c:1398: warning: dereferencing type-punned pointer will break strict-aliasing rules
skgesirq.c:1398: warning: dereferencing type-punned pointer will break strict-aliasing rules
skrlmt.c: In function 'SkRlmtInit':
skrlmt.c:661: warning: dereferencing type-punned pointer will break strict-aliasing rules
skxmac2.c: In function 'SkMacPromiscMode':
skxmac2.c:753: warning: dereferencing type-punned pointer will break strict-aliasing rules
skxmac2.c:753: warning: dereferencing type-punned pointer will break strict-aliasing rules
skxmac2.c: In function 'SkMacHashing':
skxmac2.c:803: warning: dereferencing type-punned pointer will break strict-aliasing rules
skxmac2.c:803: warning: dereferencing type-punned pointer will break strict-aliasing rules
skxmac2.c: In function 'SkMacFlushTxFifo':
skxmac2.c:1115: warning: dereferencing type-punned pointer will break strict-aliasing rules
skxmac2.c:1115: warning: dereferencing type-punned pointer will break strict-aliasing rules
skxmac2.c: In function 'SkMacFlushRxFifo':
skxmac2.c:1145: warning: dereferencing type-punned pointer will break strict-aliasing rules
skxmac2.c:1145: warning: dereferencing type-punned pointer will break strict-aliasing rules
skxmac2.c: In function 'SkXmInitPauseMd':
skxmac2.c:1987: warning: dereferencing type-punned pointer will break strict-aliasing rules
skxmac2.c:1987: warning: dereferencing type-punned pointer will break strict-aliasing rules
skxmac2.c: In function 'SkXmOverflowStatus':
skxmac2.c:4236: warning: dereferencing type-punned pointer will break strict-aliasing rules
skxmac2.c:4236: warning: dereferencing type-punned pointer will break strict-aliasing rules
skxmac2.c:4242: warning: dereferencing type-punned pointer will break strict-aliasing rules
skxmac2.c:4242: warning: dereferencing type-punned pointer will break strict-aliasing rules
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Ben Warren <biggerbadderben@gmail.com>
Wolfgang Denk [Fri, 11 Sep 2009 07:13:58 +0000 (09:13 +0200)]
drivers/net/natsemi.c: fix compile warning
Fix warning: natsemi.c:757: warning: dereferencing type-punned pointer
will break strict-aliasing rules
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Ben Warren <biggerbadderben@gmail.com>
Michal Simek [Mon, 7 Sep 2009 07:08:02 +0000 (09:08 +0200)]
net: emaclite: Cleanup license to be GPL compatible
Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Fri, 14 Aug 2009 11:41:17 +0000 (13:41 +0200)]
microblaze: Enable hush parser
With Hush parser is possible to change command line in dtb
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Thu, 20 Aug 2009 20:44:02 +0000 (22:44 +0200)]
microblaze: Remove AtmarkTechno Suzaku board
Users should use microblaze-generic platform.
This platform is longer not supported.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Thu, 20 Aug 2009 20:36:20 +0000 (22:36 +0200)]
net: Remove old Xilinx Emac driver
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Wed, 19 Aug 2009 06:10:08 +0000 (08:10 +0200)]
microblaze: Short size of global data and fix malloc size
If is full malloc area global, data are rewrite because
there was bad size of malloc area.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Fri, 14 Aug 2009 15:02:35 +0000 (17:02 +0200)]
microblaze: Add sbss, scommon and COMMON symbols for clearing
Signed-off-by: Michal Simek <monstr@monstr.eu>
Dirk Eibach [Wed, 9 Sep 2009 10:36:07 +0000 (12:36 +0200)]
ppc4xx: Rename compactcenter to intip
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Wed, 9 Sep 2009 14:25:29 +0000 (16:25 +0200)]
ppc4xx: Big cleanup of PPC4xx defines
This patch cleans up multiple issues of the 4xx register (mostly
DCR, SDR, CPR, etc) definitions:
- Change lower case defines to upper case (plb4_acr -> PLB4_ACR)
- Change the defines to better match the names from the
user's manuals (e.g. cprpllc -> CPR0_PLLC)
- Removal of some unused defines
Please test this patch intensive on your PPC4xx platform. Even though
I tried not to break anything and tested successfully on multiple
4xx AMCC platforms, testing on custom platforms is recommended.
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Fri, 11 Sep 2009 07:05:32 +0000 (09:05 +0200)]
net/bootp.c: fix compile warning
Fix warning: bootp.c:695: warning: dereferencing type-punned pointer
will break strict-aliasing rules
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Ben Warren <biggerbadderben@gmail.com>
Wolfgang Denk [Fri, 11 Sep 2009 06:58:11 +0000 (08:58 +0200)]
kwbimage.c: Fix compile warning when building on 64 bit systems
Fix this warning when building on 64 bit systems:
tools/kwbimage.c: In function 'kwbimage_checksum32':
tools/kwbimage.c:135: warning: format '%d' expects type 'int',
but argument 4 has type 'long unsigned int'
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Marcel Ziswiler [Wed, 9 Sep 2009 19:11:18 +0000 (21:11 +0200)]
muas3001: remove BRG clock node fixup to use common mpc8260 code.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>
Acked-by: Heiko Schocher <hs@denx.de>
Marcel Ziswiler [Wed, 9 Sep 2009 19:09:00 +0000 (21:09 +0200)]
r7780mp: fix typo in Ethernet chip model number comment.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>
Marcel Ziswiler [Wed, 9 Sep 2009 19:22:08 +0000 (21:22 +0200)]
ep8248: add support for device tree and secondary Ethernet interface.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>
Prafulla Wadaskar [Mon, 7 Sep 2009 09:35:02 +0000 (15:05 +0530)]
mkimage: Add Kirkwood Boot Image support (kwbimage)
This patch adds support for "kwbimage" (Kirkwood Boot Image)
image types to the mkimage code.
For details refer to docs/README.kwbimage
This patch is tested with Sheevaplug board
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Acked-by: Ron Lee <ron@debian.org>
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Prafulla Wadaskar [Mon, 7 Sep 2009 09:29:09 +0000 (14:59 +0530)]
Kirkwood: Sheevaplug: Add kwimage configuration file
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Prafulla Wadaskar [Mon, 7 Sep 2009 09:29:08 +0000 (14:59 +0530)]
mkimage: Make table_entry code global
- make get_table_entry_id() global
- make get_table_entry_name() global
- move struct table_entry to image.h
Currently this code is used by image.c only.
This patch makes this API global so it can be used by other parts of
code, too.
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Acked-by: Ron Lee <ron.debian.org>
Edit comments and commit message.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Prafulla Wadaskar [Mon, 7 Sep 2009 09:29:07 +0000 (14:59 +0530)]
mkimage: Make genimg_print_size() global
Currently it is used by image.c only, but the the function can be
used to support additional mkimage types like for example kwbimage,
so make this function globally visible.
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Edited commit message.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Prafulla Wadaskar [Mon, 7 Sep 2009 09:29:06 +0000 (14:59 +0530)]
mkimage: Include missing files in build dependency calculations
Include default_image.o and fit_image.o into the build dependency
calculations. This makes sure they get rebuilt if any of the headers
they include are modified
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Acked-by: Ron Lee <ron@debian.org>
Edited commit message.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Wed, 19 Aug 2009 09:42:56 +0000 (11:42 +0200)]
tools/mkimage: fix compiler warnings, use "const"
This fixes some compiler warnings:
tools/default_image.c:141: warning: initialization from incompatible pointer type
tools/fit_image.c:202: warning: initialization from incompatible pointer type
and changes to code to use "const" attributes in a few places where
it's appropriate.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Prafulla Wadaskar [Wed, 19 Aug 2009 12:06:46 +0000 (17:36 +0530)]
tools: mkimage: split code into core, default and FIT image specific
This is a first step towards reorganizing the mkimage code to make it
easier to add support for additional images types. Current mkimage
code is specific to generating uImage and FIT image files, but the
same framework can be used to generate other image types like
Kirkwood boot images (kwbimage-TBD). For this, the mkimage code gets
reworked:
Here is the brief plan for the same:-
a) Split mkimage code into core and image specific support
b) Implement callback functions for image specific code
c) Move image type specific code to respective C files
Currently there are two types of file generation/list
supported (i.e uImage, FIT), the code is abstracted from
mkimage.c/.h and put in default_image.c and fit_image.c;
all code in these file is static except init function call
d) mkimage_register API is added to add new image type support
All above is addressed in this patch
e) Add kwbimage type support to this new framework (TBD)
This will be implemented in a following commit.
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Edit commit message, fix coding style and typos.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Prafulla Wadaskar [Sat, 15 Aug 2009 23:58:19 +0000 (05:28 +0530)]
tools: mkimage: Fixed build warnings
uninitialized retval variable warning fixed
crc32 APIs moved to crc.h (newly added) and build warnings fixed
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Prafulla Wadaskar [Mon, 10 Aug 2009 15:14:06 +0000 (20:44 +0530)]
tools: mkimage: Makefile sorted
The tools/Makefile is sorted for all entries,
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Prafulla Wadaskar [Mon, 10 Aug 2009 13:19:37 +0000 (18:49 +0530)]
tools: mkimage : bugfix returns correct value for list command
List command always return "EXIT_SUCCESS" even in case of
failure by any means.
This patch return 0 if list command is sucessful,
returns negative value reported by check_header functions
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Mingkai Hu [Tue, 8 Sep 2009 07:07:12 +0000 (15:07 +0800)]
mkconfig: pass the board name to board config file
Then we can handle different config targets in the board file, which
simplifies the top level Makefile for boards that have multiple
config targets.
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Wolfgang Denk [Mon, 7 Sep 2009 21:52:31 +0000 (23:52 +0200)]
Remove "atmel_df_pow2" binary with "make clean"
Commit
65f6f07b added support for the atmel_df_pow2 standalone program
but missed to add a rule to remove it to the "clean" make target.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Stefan Roese [Mon, 7 Sep 2009 08:52:24 +0000 (10:52 +0200)]
ppc4xx: Fix compilation warning in 4xx miiphy.c
This patch fixes the following compilation warning:
miiphy.c: In function 'emac4xx_miiphy_read':
miiphy.c:353: warning: dereferencing type-punned pointer will break
strict-aliasing rules
Signed-off-by: Stefan Roese <sr@denx.de>
Matthias Fuchs [Mon, 7 Sep 2009 15:00:41 +0000 (17:00 +0200)]
ppc4xx: Add CONFIG_PCI_4xx_PTM_OVERWRITE to some esd 4xx boards
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
Matthias Fuchs [Mon, 7 Sep 2009 15:00:40 +0000 (17:00 +0200)]
ppc4xx: Allow overwriting pci target registers for all 4xx boards
This patch adds the CONFIG_PCI_4xx_PTM_OVERWRITE option and replaces
the ugly 'if defined(BOARD1) || ... || defined(BOARDn)' construct
in 4xx pci code.
When CONFIG_PCI_4xx_PTM_OVERWRITE is defined the default ptm register
setup can be overwritten through environment variables ptm1la, ptm1ms,
ptm2la and ptm2ms to do application specific pci target BAR configuration.
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
Matthias Fuchs [Fri, 4 Sep 2009 08:37:04 +0000 (10:37 +0200)]
ppc4xx: Fix PMC405DE support
This patch fixes PMC405DE support. Patch
85d6bf0b fixed out-of-tree
building for this board but the loadpci object did not get linked
after that.
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
Detlev Zundel [Wed, 2 Sep 2009 15:24:57 +0000 (17:24 +0200)]
amcc-common.h: Use filenames from environment variables for update procedure.
Using a separate "u-boot" environment variable allows to easily
specify different filenames for the update procedure. This is also in
line with many other board configurations defining an "update" script.
Signed-off-by: Detlev Zundel <dzu@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Kumar Gala [Wed, 9 Sep 2009 16:40:41 +0000 (11:40 -0500)]
ppc/85xx: Introduce RESET_VECTOR_ADDRESS to handle non-standard link address
Some board ports place TEXT_BASE at a location that would cause the
RESET_VECTOR_ADDRESS not to be at 0xfffffffc when we link. By default
we assume RESET_VECTOR_ADDRESS will be 0xfffffffc if the board doesn't
explicitly set it.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Wolfgang Denk <wd@denx.de>
Kumar Gala [Tue, 8 Sep 2009 18:46:46 +0000 (13:46 -0500)]
ppc/85xx: Clean up do_reset
There is no reason to do a run time check for e500 v1 based cores to
determine if we have the GUTs RSTCR facility. Only the first generation
of PQ3 parts (MPC8540/41/55/60) do not have it. So checking to see if
we are e500 v2 would miss future parts (like e500mc).
Just change this to be ifdef'd based on CONFIG_MPC85{40,41,55,60}.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Poonam Aggrwal [Thu, 3 Sep 2009 14:12:40 +0000 (19:42 +0530)]
ppc/85xx/86xx: Bug fix: call to puts in probecpu() moved to checkcpu().
While in probecpu() UART is still not initialized.
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Poonam Aggrwal [Wed, 2 Sep 2009 14:10:36 +0000 (19:40 +0530)]
ppc/85xx/86xx: Device tree fixup for number of cores
Fixing the number of cores in the device tree based on the actual number of
cores on the system. With this same device tree image can be used for dual
core and single core members of otherwise exactly same SOC.
For example:
* P2020RDB and P2010RDB
* P1020RDB and P1011RDB
* MPC8641D and MPC8641
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Poonam Aggrwal [Wed, 2 Sep 2009 08:05:21 +0000 (13:35 +0530)]
ppc/85xx,86xx: Handling Unknown SOC version
Incase the system is detected with Unknown SVR, let the system boot
with a default value and a proper message.
Now with dynamic detection of SOC properties from SVR, this is necessary
to prevent a crash.
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 2 Sep 2009 14:03:08 +0000 (09:03 -0500)]
ppc/8xxx: Refactor code to determine if PCI is enabled & agent/host
Refactor the code into a simple bitmask lookup table that determines if
a given PCI controller is enabled and if its in host/root-complex or
agent/end-point mode.
Each processor in the PQ3/MPC86xx family specified different encodings
for the cfg_host_agt[] and cfg_IO_ports[] boot strapping signals.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 2 Sep 2009 14:00:50 +0000 (09:00 -0500)]
ppc/85xx: Cleanup makefile and related optional files
Cleaned up cpu/mpc85xx/Makefile to use CONFIG_* for those obvious cases
we have like PCI, CPM2, QE. Also reworked it to use one line per file
for everything and sorted in alphabetical order.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Timur Tabi [Fri, 4 Sep 2009 22:05:24 +0000 (17:05 -0500)]
fsl: add register read-back to set_law()
After programming a new LAW, we should read-back the LAWAR register so that
we sync the writes. Otherwise, code that attempts to use the new LAW-mapped
memory might fail right away.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 3 Sep 2009 13:41:31 +0000 (08:41 -0500)]
ppc/85xx: Fix bug in setup_mp code
Its possible that we try and copy the boot page code out of flash into a
DDR location that doesn't have a TLB cover it. For example, if we have
3G of DDR we typically only map the first 2G. In the cases of 4G+ this
wasn't an issue since the reset page TLB mapping covered the last page
of memory which we wanted to copy to.
We now change the physical address of the reset page TLB to map to the
true physical location of the boot page code, copy and than set the
TLB back to its 1:1 mapping of the reset page.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 3 Sep 2009 13:20:24 +0000 (08:20 -0500)]
ppc/85xx: Add a simple function to search the TLB
Allow us to search the TLB array based on an address. This is useful
if we want to change an entry but dont know where it happens to be
located.
For example, the boot page mapping we use on MP or the flash TLB that
we change the WIMGE settings for after we've relocated.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Fri, 14 Aug 2009 18:37:54 +0000 (13:37 -0500)]
85xx: Add support for setting IVORs to fixed offset defaults
In future Book-E implementations IVORs will most likely go away and be
replaced with fixed offsets. The IVPR will continue to exist to allow
for relocation of the interrupt vectors.
This code adds support to setup the IVORs as their fixed offset values
per the ISA 2.06 spec when we transition from u-boot to another OS
either via 'bootm' or a cpu release.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Dipen Dudhat [Wed, 2 Sep 2009 05:55:08 +0000 (11:25 +0530)]
ppc/85xx: Fix up eSDHC controller clock frequency in the device tree
Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 2 Sep 2009 03:01:54 +0000 (22:01 -0500)]
ppc/8xxx: Remove ddr_pd_cntl register since it doesn't exist
The ddr_pd_cntl isn't defined in any reference manual and thus we wil
remove especially since we set it to 0, which would most likely be its
POR value.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 2 Sep 2009 02:07:08 +0000 (21:07 -0500)]
ppc/8xxx: relocate cpu pointer in global data
Now that we have a pointer to the cpu struct we need to relocate it once
we get into ram.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Anton Vorontsov [Tue, 1 Sep 2009 22:17:24 +0000 (02:17 +0400)]
fsl: sys_eeprom: Fix 'may be used uninitialized' warning
The warning is bogus, so silence it by initializing the 'ret' variable.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Dipen Dudhat [Tue, 1 Sep 2009 11:57:00 +0000 (17:27 +0530)]
ppc/85xx: Use CONFIG_FSL_ESDHC to enable sdhc clk
Enable eSDHC Clock based on generic CONFIG_FSL_ESDHC define instead of a
platform define. This will enable all the 85xx platforms to use sdhc_clk
based on CONFIG_FSL_ESDHC.
Signed-off-by: Gao Guanhua <B22826@freescale.com>
Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Wolfgang Denk [Mon, 7 Sep 2009 21:20:04 +0000 (23:20 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-i2c
Wolfgang Denk [Mon, 7 Sep 2009 21:12:46 +0000 (23:12 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-arm
Timur Tabi [Fri, 4 Sep 2009 21:28:35 +0000 (16:28 -0500)]
fsl_i2c: increase I2C timeout values and make them configurable
The value of I2C_TIMEOUT in fsl_i2c.c has several problems. First, it is
defined as CONFIG_HZ/4, but it is used as a count of microseconds, so it makes
no sense to derive it from a clock rate. Second, the current value (250) is
too low for some boards, so it needs to be increased. Third, the timeout
necessary for multiple-master arbitration is larger than the timeout for basic
read/write operations, so we shouldn't have a single constant for both timeouts.
Finally, it would be nice if we could override these values on a per-board
basis.
Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Wolfgang Denk <wd@denx.de>
Tested-by: Peter Tyser <ptyser@xes-inc.com>
Acked-by: Peter Tyser <ptyser@xes-inc.com>
Eric Millbrandt [Thu, 3 Sep 2009 13:09:44 +0000 (08:09 -0500)]
Reset i2c slave devices during init on mpc5xxx cpus
Reset any i2c devices that may have been interrupted during a system reset.
Normally this would be accomplished by clocking the line until SCL and SDA
are released and then sending a start condtiion (From an Atmel datasheet).
There is no direct access to the i2c pins so instead create start commands
through the i2c interface. Send a start command then delay for the SDA Hold
time, repeat this by disabling/enabling the bus a total of 9 times.
Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
Sandeep Paulraj [Sat, 15 Aug 2009 15:20:58 +0000 (11:20 -0400)]
ARM: DaVinci: Adding Support for DaVinci DM365 EVM
This patch adds support for the DM365 EVM.
It has been tested on a DM365 EVM.
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Sandeep Paulraj [Sat, 15 Aug 2009 15:20:44 +0000 (11:20 -0400)]
ARM: DaVinci: DaVinci DM365 SOC specific code
This patch adds support for DaVinci DM365 SOC.
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Ilko Iliev [Sat, 5 Sep 2009 00:51:34 +0000 (02:51 +0200)]
DM9000 init for pm9261
Signed-off-by: Ilko Iliev <iliev@ronetix.at>
Frederik Kriewitz [Sun, 23 Aug 2009 10:56:42 +0000 (12:56 +0200)]
Add support for the DevKit8000 board
This patch adds support for the DevKit8000 board.
Signed-off-by: Frederik Kriewitz <frederik@kriewitz.eu>
Jean-Christophe PLAGNIOL-VILLARD [Sun, 23 Aug 2009 14:32:40 +0000 (16:32 +0200)]
omap3: move the other boards to board/
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sun, 23 Aug 2009 14:32:39 +0000 (16:32 +0200)]
arm: move Logicpd's boards to board/logicpd/
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sun, 23 Aug 2009 14:32:38 +0000 (16:32 +0200)]
omap: move TI's boards to board/ti/
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Wolfgang Denk [Fri, 4 Sep 2009 21:20:29 +0000 (23:20 +0200)]
ARM: Update mach-types
Signed-off-by: Wolfgang Denk <wd@denx.de>
Mike Frysinger [Fri, 4 Sep 2009 03:12:47 +0000 (23:12 -0400)]
push LOAD_ADDR out to arch mk files
Rather than maintain/extend the current ifeq($(ARCH)) mess that exists in
the standalone Makefile, push the setting up of LOAD_ADDR out to the arch
config.mk (and rename to STANDALONE_LOAD_ADDR in the process). This keeps
the common code clean and lets the arch do whatever crazy crap it wants in
its own area.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Giuseppe CONDORELLI [Thu, 3 Sep 2009 11:37:46 +0000 (07:37 -0400)]
zlib: fix code when DEBUG is defined
Removed stdio.h inclusion and moved trace macros to use printf avoiding to
write debug informations to standard error.
Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
Scott Wood [Wed, 2 Sep 2009 21:45:31 +0000 (16:45 -0500)]
mxc_nand: Remove Freescale's "All Rights Reserved."
Signed-off-by: Scott Wood <scottwood@freescale.com>
Anton Vorontsov [Wed, 2 Sep 2009 13:58:48 +0000 (17:58 +0400)]
mpc83xx/serdes: License cleanup: remove "All Rights Reserved" notice
"All Rights Reserved" conflicts with the GPL.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Wolfgang Denk [Wed, 2 Sep 2009 12:57:27 +0000 (14:57 +0200)]
License cleanup: remove unintended "All Rights Reserved" notices.
Some files included my old standerd file header which had a "All
Rights Reserved" part. As this has never been my intention, I remove
these lines to make the files compatible with GPL v.2 and later.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Wed, 2 Sep 2009 08:21:20 +0000 (10:21 +0200)]
cmd_mtdparts.c: fix compiler warning in debug code
Fix warning messages:
cmd_mtdparts.c:1429: warning: format '%08lx' expects type 'long
unsigned int', but argument 6 has type 'u32'
cmd_mtdparts.c:1429: warning: format '%08lx' expects type 'long
unsigned int', but argument 7 has type 'u32'
Signed-off-by: Wolfgang Denk <wd@denx.de>
Anton Vorontsov [Tue, 1 Sep 2009 16:58:03 +0000 (20:58 +0400)]
Move uninitialized_var() macro from ubi_uboot.h to compiler.h
This is needed so that we could use this macro for non-UBI code.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Kumar Gala [Tue, 1 Sep 2009 16:24:45 +0000 (11:24 -0500)]
arm: Remove -fno-strict-aliasing
-fno-strict-aliasing is hidding warnings.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Tue, 1 Sep 2009 16:24:44 +0000 (11:24 -0500)]
ppc: Remove -fno-strict-aliasing
-fno-strict-aliasing is hidding warnings.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Eric Millbrandt [Fri, 28 Aug 2009 12:14:04 +0000 (07:14 -0500)]
galaxy5200: Add chip select region for an Epson S1D15313
Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
Kumar Gala [Thu, 27 Aug 2009 13:23:55 +0000 (08:23 -0500)]
Add ability for arch code to make changes before we boot
Added a arch_preboot_os() function that cpu specific code can implement to
allow for various modifications to the state of the machine right before
we boot. This can be useful to setup register state to a specific
configuration.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Roy Zang [Fri, 21 Aug 2009 19:49:52 +0000 (03:49 +0800)]
Use different PBA value for E1000 PCI and PCIe cards
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Acked-by: André Schwarz <andre.schwarz@matrix-vision.de>
Graeme Russ [Sun, 23 Aug 2009 02:59:58 +0000 (12:59 +1000)]
Add PCI support to eNET board
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
Graeme Russ [Sun, 23 Aug 2009 02:59:57 +0000 (12:59 +1000)]
i386: Moved PCI from #ifdef to conditional compile for sc520 boards
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
Graeme Russ [Sun, 23 Aug 2009 02:59:56 +0000 (12:59 +1000)]
i386: Replace [read, write]_mmcr_[byte, word, long] with memory mapped structure
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
Graeme Russ [Sun, 23 Aug 2009 02:59:55 +0000 (12:59 +1000)]
Misc sc520 cdp fixups
Now that the PCI, SATA et al compile problems have been resolved, the
cludge that was applied to avoid them can be removed
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
Graeme Russ [Sun, 23 Aug 2009 02:59:54 +0000 (12:59 +1000)]
Fixup sc520_spunk board
Primary intent is to resolve build errors for this board which has been
neglected for a very long time. I do not have one of these boards, so I
cannot test functionality
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
Graeme Russ [Sun, 23 Aug 2009 02:59:53 +0000 (12:59 +1000)]
Misc ds1722 fixups
This patch is based on a patch submitted by Jean-Christophe PLAGNIOL-VILLARD
on 18th May 2008 as part of a general i386 / sc520 fixup which was never
applied
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
Graeme Russ [Sun, 23 Aug 2009 02:59:52 +0000 (12:59 +1000)]
Misc ti_pci1410a fixups
Removed do_pinit() - now declared in cmd_pcmcia.c
Added #define CONFIG_CMD_PCMCIA around pcmcia_off() in line with other
PCMCIA drivers
signed/unsigned type fixups
Added semi-colon after default: label as required by newer gcc
The only board that appears to use this driver is the sc520_spunk which
is very old and very likely very broken anyway. I do not have one to test
whether this patch breaks anything functionaly, I have can only check
that it compiles without warning or error
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
Graeme Russ [Sun, 23 Aug 2009 02:59:51 +0000 (12:59 +1000)]
Misc SATA fixups
Cast first parameter to sata_cpy()
In /drivers/block/ata_piix.h, ata_id_has_lba48(), ata_id_has_lba(),
ata_id_has_dma(), ata_id_u32(), ata_id_u64() are all defined in
include/libata.h which is included in ata.h which is included by all files
which include ata_piix.h (only ata_piix.c) so these definitions are
supurflous to (and conlict with) this in libata.h. Interestingly, my
compiler complains about ata_id_u64 already being defined, but not
ata_id_u32
ata_dump_id() is defined in include/libata.h and should not be static
(maybe should even use ata_dump_id() in libata.c
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
Graeme Russ [Sun, 23 Aug 2009 02:59:50 +0000 (12:59 +1000)]
i386: Misc PCI fixups
Change PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY (Originally done in
commit
ff4e66e93c1a, regressed by commit
6d7f610b09f8)
Cast PCI_ROM_ADDRESS_MASK to u32
Wrap probe_pci_video() call inside #ifdef CONFIG_VIDEO
Change call to pci_find_class() to pci_find_devices(). This is based on a
patch submitted on 1st March 2007 (Patch that fixes the compilation errors
for sc520_cdp board) by mushtaq_k
This patch requires that PCI_VIDEO_VENDOR_ID and PCI_VIDEO_DEVICE_ID be
specified in the board config file. Dummy values have been added for the
SC520 CDP board to enable compilation, but since I do not have one of these,
I do know what the values should be
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
Graeme Russ [Sun, 23 Aug 2009 02:59:49 +0000 (12:59 +1000)]
Fix sc520 timer interrupt generation
The current implementation has the timer being started before the interrupt
handler is installed. It the interrupt occurs before the handler is
installed, the timer interrupt is never reset and the timer stops
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>