Thomas Gleixner [Wed, 9 Dec 2009 14:19:31 +0000 (14:19 +0000)]
audit: Call tty_audit_push_task() outside preempt disabled
While auditing all tasklist_lock read_lock sites I stumbled over the
following call chain:
audit_prepare_user_tty()
read_lock(&tasklist_lock);
tty_audit_push_task();
mutex_lock(&buf->mutex);
--> buf->mutex is locked with preemption disabled.
Solve this by acquiring a reference to the task struct under
rcu_read_lock and call tty_audit_push_task outside of the preempt
disabled region.
Move all code which needs to be protected by sighand lock into
tty_audit_push_task() and use lock/unlock_sighand as we do not hold
tasklist_lock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sat, 30 Oct 2010 06:18:32 +0000 (02:18 -0400)]
in untag_chunk() we need to do alloc_chunk() a bit earlier
... while we are not holding spinlocks.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Stephen Hemminger [Thu, 21 Oct 2010 00:23:50 +0000 (17:23 -0700)]
audit: make functions static
I was doing some namespace checks and found some simple stuff in
audit that could be cleaned up. Make some functions static, and
put const on make_reply payload arg.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Miloslav Trmac [Thu, 16 Sep 2010 22:14:11 +0000 (18:14 -0400)]
Audit: add support to match lsm labels on user audit messages
Add support for matching by security label (e.g. SELinux context) of
the sender of an user-space audit record.
The audit filter code already allows user space to configure such
filters, but they were ignored during evaluation. This patch implements
evaluation of these filters.
For example, after application of this patch, PAM authentication logs
caused by cron can be disabled using
auditctl -a user,never -F subj_type=crond_t
Signed-off-by: Miloslav Trmac <mitr@redhat.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Sat, 30 Oct 2010 01:58:00 +0000 (18:58 -0700)]
Merge branches 'x86-fixes-for-linus' and 'x86-uv-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, alternative: Call stop_machine_text_poke() on all cpus
x86-32: Restore irq stacks NUMA-aware allocations
x86, memblock: Fix early_node_mem with big reserved region.
* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, uv: More Westmere support on SGI UV
x86, uv: Enable Westmere support on SGI UV
Linus Torvalds [Sat, 30 Oct 2010 01:57:04 +0000 (18:57 -0700)]
Merge branches 'msm-fixes' and 'msm-video' of git://codeaurora.org/quic/kernel/dwalker/linux-msm
* 'msm-fixes' of git://codeaurora.org/quic/kernel/dwalker/linux-msm:
msm: Kconfig: drop unused config options
msm: fix compile failure when no debug uart is selected
msm: fix debug-macro.S build failure
msm: timer: Decrease shift on timer clocksource
arm: mach-msm: fix error handling in msm_iommu_probe()
msm: fix Kconfig target board selection
msm: fix compile failure on struct membank node member
* 'msm-video' of git://codeaurora.org/quic/kernel/dwalker/linux-msm:
drivers/video/msm/mddi.c: Remove multiple KERN_<level> uses
drivers: msm: video: add dev_set_name call
drivers: video: msm: fix hang on disable_irq
Linus Torvalds [Fri, 29 Oct 2010 23:49:34 +0000 (16:49 -0700)]
Merge branch 'for-2637/s3c24xx-all' of git://git.fluff.org/bjdooks/linux
* 'for-2637/s3c24xx-all' of git://git.fluff.org/bjdooks/linux:
ARM: h1940: add UDA1380 to i2c devices list
ARM: h1940: Fix backlight and LCD power functions
ARM: S3C2440: fix boot failure introduced by recent changes in gpiolib
ARM: S3C2440: various fixes in Kconfig file
ARM: rx1950: Add UDA1380 to i2c devices list
ARM: rx1950: Add LEDs support
ARM: rx1950: Add battery device
ARM: h1940: Implement mmc_power function
ARM: h1940: Use gpiolib for latch access
Ben Dooks [Fri, 29 Oct 2010 23:46:55 +0000 (00:46 +0100)]
ARM: Merge for-2637/s3c24xx/misc
Ben Dooks [Fri, 29 Oct 2010 23:46:49 +0000 (00:46 +0100)]
ARM: Merge for-2637/s3c24xx/h1940
Ben Dooks [Fri, 29 Oct 2010 23:46:34 +0000 (00:46 +0100)]
ARM: Merge for-2637/s3c24xx/rx1950
Vasily Khoruzhick [Mon, 27 Sep 2010 06:32:49 +0000 (09:32 +0300)]
ARM: h1940: add UDA1380 to i2c devices list
Register UDA1380 codec during H1940 machine init
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Vasily Khoruzhick [Mon, 27 Sep 2010 06:28:00 +0000 (09:28 +0300)]
ARM: h1940: Fix backlight and LCD power functions
Current implementation of LCD and backlight power control functions
is not complete, as result PDA consumes power in suspend.
Fix this issue by managing state of some latch bits, just like
WinMobile does.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jason Baron [Thu, 28 Oct 2010 15:20:27 +0000 (11:20 -0400)]
x86, alternative: Call stop_machine_text_poke() on all cpus
Currently, text_poke_smp() passes a NULL as the third argument to
__stop_machine(), which will only run stop_machine_text_poke()
on 1 cpu. Change NULL -> cpu_online_mask, as stop_machine_text_poke()
is intended to be run on all cpus.
I actually didn't notice any problems with stop_machine_text_poke()
only being called on 1 cpu, but found this via code inspection.
Signed-off-by: Jason Baron <jbaron@redhat.com>
LKML-Reference: <
20101028152026.GB2875@redhat.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Abdoulaye Walsimou Gaye [Sat, 16 Oct 2010 11:55:52 +0000 (13:55 +0200)]
ARM: S3C2440: fix boot failure introduced by recent changes in gpiolib
Recent changes in s3c gpio break mini2440 board and may be others.
The problem is that mach-mini2440.c: mini2440_init()
(where we call s3c_gpio_setpull()) is called before s3c2440.c: s3c2440_init()
(where we initialize s3c24xx_gpiocfg_default.set_pull function pointer).
This causes dereferencing of NULL pointer at boot time and a kernel panic.
Signed-off-by: Abdoulaye Walsimou Gaye <awg@embtoolkit.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Abdoulaye Walsimou Gaye [Sat, 16 Oct 2010 11:55:51 +0000 (13:55 +0200)]
ARM: S3C2440: various fixes in Kconfig file
* kconfig symbols defined in arch/arm/mach-s3c2440/Kconfig are only available
when ARCH_S3C2410 is selected, so no need to make some of them depend
on ARCH_S3C2410.
* fix CPU_S3C24405B typo in "config S3C2440_DMA".
* mini2440: remove unconditionally select of SND_S3C24XX_SOC_S3C24XX_UDA134X.
Those fixes avoid the following warnings at make time:
scripts/kconfig/qconf arch/arm/Kconfig
warning: (MACH_MINI2440 && ARCH_S3C2410) selects SND_S3C24XX_SOC_S3C24XX_UDA134X
which has unmet direct dependencies (SND_S3C24XX_SOC && ARCH_S3C2410)
warning: (CPU_S3C2440 && ARCH_S3C2410 && S3C2410_DMA) selects S3C2440_DMA which
has unmet direct dependencies (ARCH_S3C2410 && CPU_S3C24405B)
warning: (CPU_S3C2440 && ARCH_S3C2410 || CPU_S3C2442 && ARCH_S3C2410)
selects CPU_S3C244X which has unmet direct dependencies (!ARCH_S3C2410)
Signed-off-by: Abdoulaye Walsimou Gaye <awg@embtoolkit.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Linus Torvalds [Fri, 29 Oct 2010 23:15:57 +0000 (16:15 -0700)]
Merge branch 'for-2637/i2c-all' of git://git.fluff.org/bjdooks/linux
* 'for-2637/i2c-all' of git://git.fluff.org/bjdooks/linux:
i2c-intel-mid: Driver depends on PCI
i2c-intel-mid: support for Moorestown and Medfield platform
i2c-nomadik: fixup bus delays
i2c-nomadik: support smbus emulation
i2c-nomadik: dynamic clocking
i2c-nomadik: documentation fixes
i2c-s3c2410: Enable i2c clock only when doing some transfert
Daniel Walker [Wed, 27 Oct 2010 20:10:34 +0000 (13:10 -0700)]
msm: Kconfig: drop unused config options
These two config options don't exist, and aren't ever going to.
So I simply delete them.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Daniel Walker [Wed, 27 Oct 2010 20:04:58 +0000 (13:04 -0700)]
msm: fix compile failure when no debug uart is selected
If the board has a debug uart the user is given a choice of which
uart to use. The user can also select NONE, which means not to use one.
In most of our header files when NONE is selected nothing is defined
for MSM_DEBUG_UART_PHYS or MSM_DEBUG_UART_BASE. This causes a compile
failure in debug-macro.S which expect something to be defined there.
Example of the failure,
arch/arm/kernel/built-in.o: In function `hexbuf':
linux-2.6/arch/arm/kernel/debug.S:186: undefined reference to `MSM_DEBUG_UART_PHYS'
linux-2.6/arch/arm/kernel/debug.S:186: undefined reference to `MSM_DEBUG_UART_BASE'
This fixes the compile failure by adding an ifdef to debug-macro.S
that removes all the debug uart code in the case of NONE.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Daniel Walker [Wed, 27 Oct 2010 22:25:59 +0000 (15:25 -0700)]
msm: fix debug-macro.S build failure
Originally there was an ifdef case to handle when no debug uart
was selected. In commit
0ea1293009826da45e1019f45dfde1e557bb30df
that case was removed which causes the following build failure,
linux-2.6/arch/arm/kernel/debug.S: Assembler messages:
linux-2.6/arch/arm/kernel/debug.S:174: Error: bad instruction `addruart r1,r2'
linux-2.6/arch/arm/kernel/debug.S:176: Error: bad instruction `waituart r2,r3'
linux-2.6/arch/arm/kernel/debug.S:177: Error: bad instruction `senduart r1,r3'
linux-2.6/arch/arm/kernel/debug.S:178: Error: bad instruction `busyuart r2,r3'
linux-2.6/arch/arm/kernel/debug.S:190: Error: bad instruction `addruart r1,r2'
This is a partial revert to add back the case which was removed with
two caveats. First the API for the addruart macro was updated, and
the new addruart case now return 0xfff00000 so that a know IO mapping
is created instead of a random one.
Cc: Jeremy Kerr <jeremy.kerr@canonical.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Jason Wang <jason77.wang@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Randy Dunlap [Fri, 29 Oct 2010 20:37:09 +0000 (13:37 -0700)]
i2c-intel-mid: Driver depends on PCI
i2c-intel-mid driver uses PCI data structs and interfaces,
so it should depend on PCI. Fixes these build errors:
drivers/i2c/busses/i2c-intel-mid.c:977: error: implicit declaration of function 'pci_request_region'
drivers/i2c/busses/i2c-intel-mid.c:1077: error: implicit declaration of function 'pci_release_region'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Ba Zheng <zheng.ba@intel.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: linux-i2c@vger.kernel.org
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Linus Torvalds [Fri, 29 Oct 2010 22:09:56 +0000 (15:09 -0700)]
Merge branch 'pm-fixes' of git://git./linux/kernel/git/rafael/suspend-2.6
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
PM / Runtime: Fix typo in status comparison causing warning
Linus Torvalds [Fri, 29 Oct 2010 21:43:30 +0000 (14:43 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/rostedt/linux-2.6-kconfig
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig:
kconfig: Have streamline_config process menuconfigs too
kconfig: Fix streamline_config to read multi line deps in Kconfig files
kconfig: Fix missing declaration of variable $dir in streamline_config.pl
kconfig: Fix variable name typo %prompts in streamline_config.pl
kconfig: Make localmodconfig handle environment variables
Linus Torvalds [Fri, 29 Oct 2010 21:17:12 +0000 (14:17 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits)
b43: Fix warning at drivers/mmc/core/core.c:237 in mmc_wait_for_cmd
mac80211: fix failure to check kmalloc return value in key_key_read
libertas: Fix sd8686 firmware reload
ath9k: Fix incorrect access of rate flags in RC
netfilter: xt_socket: Make tproto signed in socket_mt6_v1().
stmmac: enable/disable rx/tx in the core with a single write.
net: atarilance - flags should be unsigned long
netxen: fix kdump
pktgen: Limit how much data we copy onto the stack.
net: Limit socket I/O iovec total length to INT_MAX.
USB: gadget: fix ethernet gadget crash in gether_setup
fib: Fix fib zone and its hash leak on namespace stop
cxgb3: Fix panic in free_tx_desc()
cxgb3: fix crash due to manipulating queues before registration
8390: Don't oops on starting dev queue
dccp ccid-2: Stop polling
dccp: Refine the wait-for-ccid mechanism
dccp: Extend CCID packet dequeueing interface
dccp: Return-value convention of hc_tx_send_packet()
igbvf: fix panic on load
...
Linus Torvalds [Fri, 29 Oct 2010 21:16:08 +0000 (14:16 -0700)]
Merge git://git./linux/kernel/git/gregkh/staging-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
Staging: dream: remove dream driver and arch from tree
Linus Torvalds [Fri, 29 Oct 2010 21:15:12 +0000 (14:15 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ecryptfs/ecryptfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
eCryptfs: Print mount_auth_tok_only param in ecryptfs_show_options
ecryptfs: added ecryptfs_mount_auth_tok_only mount parameter
ecryptfs: checking return code of ecryptfs_find_auth_tok_for_sig()
ecryptfs: release keys loaded in ecryptfs_keyring_auth_tok_for_sig()
eCryptfs: Clear LOOKUP_OPEN flag when creating lower file
ecryptfs: call vfs_setxattr() in ecryptfs_setxattr()
Valdis.Kletnieks@vt.edu [Fri, 29 Oct 2010 21:03:46 +0000 (17:03 -0400)]
drivers/dma/Kconfig: add part number for Topcliff.
Product codenames are OK, but once an actual product name is available,
it should be referenced as well.
http://ark.intel.com/chipset.aspx?familyID=52499
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Greg Kroah-Hartman [Fri, 29 Oct 2010 19:42:18 +0000 (12:42 -0700)]
Staging: dream: remove dream driver and arch from tree
This code is stalled, with no one working on it anymore, and the main
msm code is now going through the proper channels to get merged
correctly.
So remove it as it contains a number of kernel information leaks and it
is doubtful if it even still builds anymore.
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Bryan Huntsman <bryanh@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David S. Miller [Fri, 29 Oct 2010 19:23:15 +0000 (12:23 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6
Linus Torvalds [Fri, 29 Oct 2010 18:49:38 +0000 (11:49 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/jwessel/linux-2.6-kgdb
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
kgdb,ppc: Individual register get/set for ppc
kgdbts: prevent re-entry to kgdbts before it unregisters
debug_core,x86,blackfin: Clean up hw debug disable API
kdb: Fix early debugging crash regression
kgdb,arm: fix register dump
kdb: fix per_cpu command to remove supress mask
kdb: Add kdb kernel module sample
Linus Torvalds [Fri, 29 Oct 2010 18:47:11 +0000 (11:47 -0700)]
Merge branch 'next' of git://git./linux/kernel/git/kyle/parisc-2.6
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
parisc-agp: fix missing slab.h include
Larry Finger [Thu, 28 Oct 2010 15:43:26 +0000 (10:43 -0500)]
b43: Fix warning at drivers/mmc/core/core.c:237 in mmc_wait_for_cmd
On module removal, the sdio version of b43 generates the following warning:
[ 851.560519] ------------[ cut here ]------------
[ 851.560531] WARNING: at drivers/mmc/core/core.c:237 mmc_wait_for_cmd+0x88/0x90()
[ 851.560534] Hardware name: 20552PG
[ 851.560536] Modules linked in: b43(-) ssb mmc_block binfmt_misc rfcomm sco bnep ppdev l2cap ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp kvm_intel kvm arc4 iwlagn snd_hda_codec_conexant snd_hda_intel snd_hda_codec iwlcore snd_hwdep snd_pcm thinkpad_acpi mac80211 snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq r852 joydev snd_timer sm_common pcmcia nand snd_seq_device cfg80211 sdhci_pci btusb psmouse tpm_tis yenta_socket nand_ids lp snd pcmcia_rsrc nand_ecc bluetooth sdhci tpm pcmcia_core parport mtd snd_page_alloc serio_raw tpm_bios soundcore nvram led_class sha256_generic aes_i586 aes_generic dm_crypt i915 drm_kms_helper drm ahci intel_agp i2c_algo_bit intel_gtt e1000e libahci video agpgart output
[ 851.560620] Pid: 2504, comm: rmmod Not tainted 2.6.36-titan0+ #1
[ 851.560622] Call Trace:
[ 851.560631] [<
c014a102>] warn_slowpath_common+0x72/0xa0
[ 851.560636] [<
c04d94c8>] ? mmc_wait_for_cmd+0x88/0x90
[ 851.560641] [<
c04d94c8>] ? mmc_wait_for_cmd+0x88/0x90
[ 851.560645] [<
c014a152>] warn_slowpath_null+0x22/0x30
[ 851.560649] [<
c04d94c8>] mmc_wait_for_cmd+0x88/0x90
[ 851.560655] [<
c0401585>] ? device_release+0x25/0x80
[ 851.560660] [<
c04df210>] mmc_io_rw_direct_host+0xa0/0x150
[ 851.560665] [<
c04df370>] mmc_io_rw_direct+0x30/0x40
[ 851.560669] [<
c04e06e7>] sdio_disable_func+0x37/0xa0
[ 851.560683] [<
f8dfcb80>] b43_sdio_remove+0x30/0x50 [b43]
[ 851.560687] [<
c04df8cc>] sdio_bus_remove+0x1c/0x60
[ 851.560692] [<
c016d39f>] ? blocking_notifier_call_chain+0x1f/0x30
[ 851.560697] [<
c0404991>] __device_release_driver+0x51/0xb0
[ 851.560701] [<
c0404a7f>] driver_detach+0x8f/0xa0
[ 851.560705] [<
c0403c83>] bus_remove_driver+0x63/0xa0
[ 851.560709] [<
c0405039>] driver_unregister+0x49/0x80
[ 851.560713] [<
c0405039>] ? driver_unregister+0x49/0x80
[ 851.560718] [<
c04dfad7>] sdio_unregister_driver+0x17/0x20
[ 851.560727] [<
f8dfcb42>] b43_sdio_exit+0x12/0x20 [b43]
[ 851.560734] [<
f8dfe76f>] b43_exit+0x17/0x3c [b43]
[ 851.560740] [<
c017fb8d>] sys_delete_module+0x13d/0x200
[ 851.560747] [<
c01fd7d2>] ? do_munmap+0x212/0x300
[ 851.560752] [<
c010311f>] sysenter_do_call+0x12/0x28
[ 851.560757] ---[ end trace
31e14488072d2f7d ]---
[ 851.560759] ------------[ cut here ]------------
The warning is caused by b43 not claiming the device before calling
sdio_disable_func().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-by: Arnd Hannemann <arnd@arndnet.de>
Tested-by: Arnd Hannemann <arnd@arndnet.de>
Cc: Stable <stable@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jesper Juhl [Fri, 29 Oct 2010 14:10:26 +0000 (16:10 +0200)]
mac80211: fix failure to check kmalloc return value in key_key_read
I noticed two small issues in mac80211/debugfs_key.c::key_key_read while
reading through the code. Patch below.
The key_key_read() function returns ssize_t and the value that's actually
returned is the return value of simple_read_from_buffer() which also
returns ssize_t, so let's hold the return value in a ssize_t local
variable rather than a int one.
Also, memory is allocated dynamically with kmalloc() which can fail, but
the return value of kmalloc() is not checked, so we may end up operating
on a null pointer further on. So check for a NULL return and bail out with
-ENOMEM in that case.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Paul Fox [Fri, 29 Oct 2010 13:57:28 +0000 (14:57 +0100)]
libertas: Fix sd8686 firmware reload
For the SD8686, we cannot rely on the scratch register to read the firmware
load status, because the same register is used for storing RX packet length.
Broaden the check to account for this.
The module can now be unloaded/reloaded successfully.
Based on the implementation from libertas_tf.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Steve deRosier <steve@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Mohammed Shafi Shajakhan [Thu, 28 Oct 2010 14:21:47 +0000 (19:51 +0530)]
ath9k: Fix incorrect access of rate flags in RC
The index variable to access the rate flags should be obtained from the
inner loop counter which corresponds to the rate table structure.This
fixes the invalid rate selection i.e when the supported basic rate is
invalid on a particular band and also the following warning message.
Thanks to Raj for finding this out.
Call Trace:
[<
ffffffff8104ee4a>] warn_slowpath_common+0x7a/0xb0
[<
ffffffff8104ee95>] warn_slowpath_null+0x15/0x20
[<
ffffffffa0583c45>] ath_get_rate+0x595/0x5b0 [ath9k]
[<
ffffffff811a0636>] ? cpumask_next_and+0x36/0x50
[<
ffffffffa0405186>] rate_control_get_rate+0x86/0x160 [mac80211]
[<
ffffffffa040dfac>] invoke_tx_handlers+0x81c/0x12d0 [mac80211]
[<
ffffffffa040eae9>] ieee80211_tx+0x89/0x2b0 [mac80211]
[<
ffffffff812891bc>] ? pskb_expand_head+0x1cc/0x1f0
[<
ffffffffa040edc5>] ieee80211_xmit+0xb5/0x1c0 [mac80211]
[<
ffffffffa041026f>] ieee80211_tx_skb+0x4f/0x60 [mac80211]
[<
ffffffffa03fe016>] ieee80211_send_nullfunc+0x46/0x60 [mac80211]
[<
ffffffffa03f91d7>] ieee80211_offchannel_stop_station+0x107/0x150
[mac80211]
[<
ffffffff812891bc>] ? pskb_expand_head+0x1cc/0x1f0
[<
ffffffffa040edc5>] ieee80211_xmit+0xb5/0x1c0 [mac80211]
[<
ffffffffa041026f>] ieee80211_tx_skb+0x4f/0x60 [mac80211]
[<
ffffffffa03fe016>] ieee80211_send_nullfunc+0x46/0x60 [mac80211]
[<
ffffffffa03f91d7>] ieee80211_offchannel_stop_station+0x107/0x150
[mac80211]
[<
ffffffffa03f8896>] ieee80211_scan_work+0x146/0x600 [mac80211]
[<
ffffffff8133a375>] ? schedule+0x2f5/0x8e0
[<
ffffffffa03f8750>] ? ieee80211_scan_work+0x0/0x600 [mac80211]
[<
ffffffff81064fcf>] process_one_work+0x10f/0x380
[<
ffffffff81066bc2>] worker_thread+0x162/0x340
[<
ffffffff81066a60>] ? worker_thread+0x0/0x340
Cc: stable@kernel.org
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dongdong Deng [Thu, 28 Oct 2010 02:47:00 +0000 (21:47 -0500)]
kgdb,ppc: Individual register get/set for ppc
commit
534af1082329392bc29f6badf815e69ae2ae0f4c(kgdb,kdb: individual
register set and and get API) introduce dbg_get_reg/dbg_set_reg API
for individual register get and set.
This patch implement those APIs for ppc.
Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Dongdong Deng [Tue, 31 Aug 2010 02:06:00 +0000 (21:06 -0500)]
kgdbts: prevent re-entry to kgdbts before it unregisters
The "kgdb_connected" variable of debug_core just indicates whether or
not kgdbts is connected to the debug_core. It does not completely
prevent a script from trying invoke kgdbts again and possibly crashing
the system (see Call Trace below).
The configured variable in kgtbts can be used instead of
kgdb_connected instead of kgdb_connected. The cleanup_kgdbts() can
also be removed because there is no possible way to build kgdbts as a
kernel module that you could unload with rmmod.
Call Trace:
-----------------------------------------------------------------
root:/$ echo kgdbts=V1S1000 > /sys/module/kgdbts/parameters/kgdbts
kgdb: Unregistered I/O driver kgdbts, debugger disabled.
------------[ cut here ]------------
WARNING: at kernel/debug/debug_core.c:1002
kgdb_unregister_io_module+0xec/0x100()
Hardware name: Moon Creek platform
Modules linked in:
Pid: 664, comm: sh Not tainted 2.6.34.1-WR4.0.0.0_standard #58
Call Trace:
[<
c103b1ed>] warn_slowpath_common+0x6d/0xa0
[<
c1079fdc>] ? kgdb_unregister_io_module+0xec/0x100
[<
c1079fdc>] ? kgdb_unregister_io_module+0xec/0x100
[<
c10544e0>] ? param_attr_store+0x0/0x20
[<
c103b235>] warn_slowpath_null+0x15/0x20
[<
c1079fdc>] kgdb_unregister_io_module+0xec/0x100
[<
c124e4ea>] cleanup_kgdbts+0x1a/0x20
[<
c124eced>] param_set_kgdbts_var+0x6d/0xb0
[<
c124ec80>] ? param_set_kgdbts_var+0x0/0xb0
[<
c10544f7>] param_attr_store+0x17/0x20
[<
c105457c>] module_attr_store+0x2c/0x40
[<
c111fe84>] sysfs_write_file+0x94/0xf0
[<
c10d42f6>] vfs_write+0x96/0x130
[<
c111fdf0>] ? sysfs_write_file+0x0/0xf0
[<
c10d44d6>] sys_write+0x46/0xd0
[<
c13bf329>] system_call_done+0x0/0x4
---[ end trace
4eb028c6ee43154c ]---
kgdb: Unregistered I/O driver kgdbts, debugger disabled.
-----------------------------------------------------------------
[jason.wessel@windriver.com: remove cleanup_kgdbts() ]
Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Dongdong Deng [Wed, 18 Aug 2010 11:02:00 +0000 (06:02 -0500)]
debug_core,x86,blackfin: Clean up hw debug disable API
The kgdb_disable_hw_debug() was an architecture specific function for
disabling all hardware breakpoints on a per cpu basis when entering
the debug core.
This patch will remove the weak function kdbg_disable_hw_debug() and
change it into a call back which lives with the rest of hw breakpoint
call backs in struct kgdb_arch.
Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Jason Wessel [Fri, 29 Oct 2010 18:14:41 +0000 (13:14 -0500)]
kdb: Fix early debugging crash regression
The kdb_current legally be equal to NULL in the early boot of the x86
arch. The problem pcan be observed by booting with the kernel arguments:
earlyprintk=vga ekgdboc=kbd kgdbwait
The kdb shell will oops on entry and recursively fault because it
cannot get past the final stage of shell initialization.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Rabin Vincent [Tue, 26 Oct 2010 17:49:00 +0000 (12:49 -0500)]
kgdb,arm: fix register dump
DBG_MAX_REG_NUM incorrectly had the number of indices in the GDB regs
array rather than the number of registers, leading to an oops when the
"rd" command is used in KDB.
Cc: stable@kernel.org
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Jason Wessel [Fri, 29 Oct 2010 13:04:16 +0000 (08:04 -0500)]
kdb: fix per_cpu command to remove supress mask
Rusty pointed out that the per_cpu command uses up lots of space on
the stack and the cpu supress mask is probably not needed.
This patch removes the need for the supress mask as well as fixing up
the following problems with the kdb per_cpu command:
* The per_cpu command should allow an address as an argument
* When you have more data than can be displayed on one screen allow
the user to break out of the print loop.
Reported-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Jason Wessel [Mon, 25 Oct 2010 15:14:05 +0000 (10:14 -0500)]
kdb: Add kdb kernel module sample
Add an example of how to add a dynamic kdb shell command via a kernel
module.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Linus Torvalds [Fri, 29 Oct 2010 18:13:10 +0000 (11:13 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/upstream-linus
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (46 commits)
ftrace/MIPS: Enable C Version of recordmcount
ftrace/MIPS: Add module support for C version of recordmcount
ftrace/MIPS: Add MIPS64 support for C version of recordmcount
MIPS: Make TASK_SIZE reflect proper size for both 32 and 64 bit processes.
MIPS: Allow UserLocal on MIPS_R1 processors
MIPS: Honor L2 bypass bit
MIPS: Add BMIPS CP0 register definitions
MIPS: Add BMIPS processor types to Kconfig
MIPS: Decouple BMIPS CPU support from bcm47xx/bcm63xx SoC code
MIPS: Add support for hardware performance events (mipsxx)
MIPS: Perf-events: Add callchain support
MIPS: add support for hardware performance events (skeleton)
MIPS: add support for software performance events
MIPS: define local_xchg from xchg_local to atomic_long_xchg
MIPS: AR7: Add support for Titan (TNETV10xx) SoC variant
MIPS: AR7: Initialize GPIO earlier
MIPS: Add platform device and Kconfig for Octeon USB EHCI / OHCI
USB: Add EHCI and OHCH glue for OCTEON II SOCs.
MIPS: Octeon: Add register definitions for EHCI / OHCI USB glue logic.
MIPS: Octeon: Apply CN63XXP1 errata workarounds.
...
Wu Zhangjin [Wed, 27 Oct 2010 10:59:09 +0000 (18:59 +0800)]
ftrace/MIPS: Enable C Version of recordmcount
Selects HAVE_C_RECORDMCOUNT to use the C version of the recordmcount
intead of the old Perl Version of recordmcount.
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
LKML-Reference: <
bb99009a9ac79d3f55a8c8bf1c8bd2bc0e1f160e.
1288176026.git.wuzhangjin@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Wu Zhangjin [Wed, 27 Oct 2010 10:59:08 +0000 (18:59 +0800)]
ftrace/MIPS: Add module support for C version of recordmcount
Since MIPS modules' address space differs from the core kernel space, to access
the _mcount in the core kernel, the kernel functions in modules must use long
call (-mlong-calls): load the _mcount address into one register and jump to the
address stored by the register:
c:
3c030000 lui v1,0x0 <--------> b label
c: R_MIPS_HI16 _mcount
c: R_MIPS_NONE *ABS*
c: R_MIPS_NONE *ABS*
10:
64630000 daddiu v1,v1,0
10: R_MIPS_LO16 _mcount
10: R_MIPS_NONE *ABS*
10: R_MIPS_NONE *ABS*
14:
03e0082d move at,ra
18:
0060f809 jalr v1
label:
In the old Perl version of recordmcount, we only need to record the position of
the 1st R_MIPS_HI16 type of _mcount, and later, in ftrace_make_nop(), replace
the instruction in this position by a "b label" and in ftrace_make_call(),
replace it back.
But, the default C version of recordmcount records all of the _mcount symbols,
so, we must filter the 2nd _mcount like the Perl version of recordmcount does.
The C version of recordmcount copes with the symbols before they are linked, So
It doesn't know the type of the symbols and therefore can not filter the
symbols as the Perl version of recordmcount does. But as we can see above, the
2nd _mcount symbols of the long call alawys follows the 1st _mcount symbol of
the same long call, which means the offset from the 1st to the 2nd is fixed, it
is 0x10-0xc = 4 here, 4 is the length of the 1st load instruciton, for MIPS has
fixed length of instructions, this offset is always 4.
And as we know, the _mcount is inserted into the entry of every kernel
function, the offset between the other _mcount's is expected to be always
bigger than 4. So, to filter the 2ns _mcount symbol of the long call, we can
simply check the offset between two _mcount symbols, If it is 4, then, filter
the 2nd _mcount symbol.
To avoid touching too much code, an 'empty' function fn_is_fake_mcount() is
added for all of the archs, and the specific archs can override it via chaning
the function pointer: is_fake_mcount in do_file() with the e_machine. e.g. This
patch adds MIPS_is_fake_mcount() to override the default fn_is_fake_mcount()
pointed by is_fake_mcount.
This fn_is_fake_mcount() checks if the _mcount symbol is fake, e.g. the 2nd
_mcount symbol of the long call is fake, for there are 2 _mcount symbols mapped
to one real mcount call, so, one of them is fake and must be filtered.
This fn_is_fake_mcount() is called in sift_rel_mcount() after finding the
_mcount symbols and before adding the _mcount symbol into mrelp, so, it can
prevent the fake mcount symbol going into the last __mcount_loc table.
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
LKML-Reference: <
b866f0138224340a132d31861fa3f9300dee30ac.
1288176026.git.wuzhangjin@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
John Reiser [Wed, 27 Oct 2010 10:59:07 +0000 (18:59 +0800)]
ftrace/MIPS: Add MIPS64 support for C version of recordmcount
MIPS64 has 'weird' Elf64_Rel.r_info[1,2], which must be used instead of
the generic Elf64_Rel.r_info, otherwise, the C version of recordmcount
will not work for "segmentation fault".
Usage of "union mips_r_info" and the functions MIPS64_r_sym() and
MIPS64_r_info() written by Maciej W. Rozycki <macro@linux-mips.org>
----
[1] http://techpubs.sgi.com/library/manuals/4000/007-4658-001/pdf/007-4658-001.pdf
[2] arch/mips/include/asm/module.h
Tested-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: John Reiser <jreiser@BitWagon.com>
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
LKML-Reference: <AANLkTinwXjLAYACUfhLYaocHD_vBbiErLN3NjwN8JqSy@mail.gmail.com>
LKML-Reference: <
910dc2d5ae1ed042df4f96815fe4a433078d1c2a.
1288176026.git.wuzhangjin@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Thu, 14 Oct 2010 18:32:33 +0000 (11:32 -0700)]
MIPS: Make TASK_SIZE reflect proper size for both 32 and 64 bit processes.
The TASK_SIZE macro should reflect the size of a user process virtual
address space. Previously for 64-bit kernels, this was not the case.
The immediate cause of pain was in
hugetlbfs/inode.c:hugetlb_get_unmapped_area() where 32-bit processes
trying to mmap a huge page would be served a page with an address
outside of the 32-bit address range. But there are other uses of
TASK_SIZE in the kernel as well that would like an accurate value.
The new definition is nice because it now makes TASK_SIZE and
TASK_SIZE_OF() yield the same value for any given process.
For 32-bit kernels there should be no change, although I did factor
out some code in asm/processor.h that became identical for the 32-bit and
64-bit cases.
__UA_LIMIT is now set to ~((1 << SEGBITS) - 1) for 64-bit kernels.
This should eliminate the possibility of getting a
AddressErrorException in the kernel for addresses that pass the
access_ok() test.
With the patch applied, I can still run o32, n32 and n64 processes,
and have an o32 shell fork/exec both n32 and n64 processes.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1701/
Kevin Cernekee [Sat, 16 Oct 2010 21:22:38 +0000 (14:22 -0700)]
MIPS: Allow UserLocal on MIPS_R1 processors
Some MIPS32R1 processors implement UserLocal (RDHWR $29) to accelerate
programs that make extensive use of thread-local storage. Therefore,
setting up the HWRENA register should not depend on cpu_has_mips_r2.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Kevin Cernekee [Thu, 21 Oct 2010 03:05:42 +0000 (20:05 -0700)]
MIPS: Honor L2 bypass bit
On many of the newer MIPS32 cores, CP0 CONFIG2 bit 12 (L2B) indicates
that the L2 cache is disabled and therefore Linux should not attempt
to use it.
[Ralf: Moved the code added by Kevin's original patch into a separate
function that can easily be replaced for platforms that need more a
different probe.]
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: linux-mips@linux-mips.org>
Cc: <linux-kernel@vger.kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/1723/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Kevin Cernekee [Sat, 16 Oct 2010 21:22:32 +0000 (14:22 -0700)]
MIPS: Add BMIPS CP0 register definitions
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: mbizon@freebox.fr
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Florian Fainelli <ffainelli@freebox.fr>
Patchwork: https://patchwork.linux-mips.org/patch/1708/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org
Kevin Cernekee [Sun, 17 Oct 2010 17:56:53 +0000 (10:56 -0700)]
MIPS: Add BMIPS processor types to Kconfig
[v2: add "VIPER" marketing name for BMIPS4350]
Add processor feature definitions for BMIPS3300, BMIPS4350, BMIPS4380,
and BMIPS5000.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: mbizon@freebox.fr
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Florian Fainelli <ffainelli@freebox.fr>
Patchwork: https://patchwork.linux-mips.org/patch/1716/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org
Kevin Cernekee [Sat, 16 Oct 2010 21:22:30 +0000 (14:22 -0700)]
MIPS: Decouple BMIPS CPU support from bcm47xx/bcm63xx SoC code
BMIPS processor cores are used in 50+ different chipsets spread across
5+ product lines. In many cases the chipsets do not share the same
peripheral register layouts, the same register blocks, the same
interrupt controllers, the same memory maps, or much of anything else.
But, across radically different SoCs that share nothing more than the
same BMIPS CPU, a few things are still mostly constant:
SMP operations
Access to performance counters
DMA cache coherency quirks
Cache and memory bus configuration
So, it makes sense to treat each BMIPS processor type as a generic
"building block," rather than tying it to a specific SoC. This makes it
easier to support a large number of BMIPS-based chipsets without
unnecessary duplication of code, and provides the infrastructure needed
to support BMIPS-proprietary features.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: mbizon@freebox.fr
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Florian Fainelli <ffainelli@freebox.fr>
Patchwork: https://patchwork.linux-mips.org/patch/1706/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org
Deng-Cheng Zhu [Tue, 12 Oct 2010 11:37:24 +0000 (19:37 +0800)]
MIPS: Add support for hardware performance events (mipsxx)
This patch adds the mipsxx Perf-events support based on the skeleton.
Generic hardware events and cache events are now fully implemented for
the 24K/34K/74K/1004K cores. To support other cores in mipsxx (such as
R10000/SB1), the generic hardware event tables and cache event tables
need to be filled out. To support other CPUs which have different PMU
than mipsxx, such as RM9000 and LOONGSON2, the additional files
perf_event_$cpu.c need to be created.
Raw event is an important part of Perf-events. It helps the user collect
performance data for events that are not listed as the generic hardware
events and cache events but ARE supported by the CPU's PMU.
This patch also adds this feature for mipsxx 24K/34K/74K/1004K. For how to
use it, please refer to processor core software user's manual and the
comments for mipsxx_pmu_map_raw_event() for more details.
Please note that this is a "precise" implementation, which means the
kernel will check whether the requested raw events are supported by this
CPU and which hardware counters can be assigned for them.
To test the functionality of Perf-event, you may want to compile the tool
"perf" for your MIPS platform. You can refer to the following URL:
http://www.linux-mips.org/archives/linux-mips/2010-10/msg00126.html
You also need to customize the CFLAGS and LDFLAGS in tools/perf/Makefile
for your libs, includes, etc.
In case you encounter the boot failure in SMVP kernel on multi-threading
CPUs, you may take a look at:
http://www.linux-mips.org/git?p=linux-mti.git;a=commitdiff;h=
5460815027d802697b879644c74f0e8365254020
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: linux-mips@linux-mips.org
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: jamie.iles@picochip.com
Cc: ddaney@caviumnetworks.com
Cc: matt@console-pimps.org
Patchwork: https://patchwork.linux-mips.org/patch/1689/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
create mode 100644 arch/mips/kernel/perf_event_mipsxx.c
Deng-Cheng Zhu [Tue, 12 Oct 2010 11:37:23 +0000 (19:37 +0800)]
MIPS: Perf-events: Add callchain support
Adds callchain support for MIPS Perf-events. For more info on this feature,
please refer to tools/perf/Documentation/perf-report.txt and
tools/perf/design.txt.
Currently userspace callchain data is not recorded, because we do not have
a safe way to do this.
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Acked-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: jamie.iles@picochip.com
Cc: matt@console-pimps.org
Patchwork: https://patchwork.linux-mips.org/patch/1690/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Deng-Cheng Zhu [Tue, 12 Oct 2010 11:37:22 +0000 (19:37 +0800)]
MIPS: add support for hardware performance events (skeleton)
This patch provides the skeleton of the HW perf event support. To enable
this feature, we can not choose the SMTC kernel; Oprofile should be
disabled; kernel performance events be selected. Then we can enable it in
Kernel type menu.
Oprofile for MIPS platforms initializes irq at arch init time. Currently
we do not change this logic to allow PMU reservation.
If a platform has EIC, we can use the irq base and perf counter irq offset
defines for the interrupt controller in specific init_hw_perf_events().
Based on this skeleton patch, the 3 different kinds of MIPS PMU, namely,
mipsxx/loongson2/rm9000, can be supported by adding corresponding lower
level C files at the bottom. The suggested names of these files are
perf_event_mipsxx.c/perf_event_loongson2.c/perf_event_rm9000.c. So, for
example, we can do this by adding "#include perf_event_mipsxx.c" at the
bottom of perf_event.c.
In addition, PMUs with 64bit counters are also considered in this patch.
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: linux-mips@linux-mips.org
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: jamie.iles@picochip.com
Cc: ddaney@caviumnetworks.com
Cc: matt@console-pimps.org
Patchwork: https://patchwork.linux-mips.org/patch/1688/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Deng-Cheng Zhu [Tue, 12 Oct 2010 11:37:21 +0000 (19:37 +0800)]
MIPS: add support for software performance events
Software events are required as part of the measurable stuff by the
Linux performance counter subsystem. Here is the list of events added by
this patch:
PERF_COUNT_SW_PAGE_FAULTS
PERF_COUNT_SW_PAGE_FAULTS_MIN
PERF_COUNT_SW_PAGE_FAULTS_MAJ
PERF_COUNT_SW_ALIGNMENT_FAULTS
PERF_COUNT_SW_EMULATION_FAULTS
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: linux-mips@linux-mips.org
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: jamie.iles@picochip.com
Acked-by: David Daney <ddaney@caviumnetworks.com>
Reviewed-by: Matt Fleming <matt@console-pimps.org>
Patchwork: https://patchwork.linux-mips.org/patch/1686/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Deng-Cheng Zhu [Tue, 12 Oct 2010 11:37:20 +0000 (19:37 +0800)]
MIPS: define local_xchg from xchg_local to atomic_long_xchg
Perf-events is now using local_t helper functions internally. There is a
use of local_xchg(). On MIPS, this is defined to xchg_local() which is
missing in asm/system.h. This patch re-defines local_xchg() in asm/local.h
to atomic_long_xchg(). Then Perf-events can pass the build.
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: linux-mips@linux-mips.org
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: jamie.iles@picochip.com
Cc: ddaney@caviumnetworks.com
Cc: matt@console-pimps.org
Patchwork: https://patchwork.linux-mips.org/patch/1687/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Florian Fainelli [Sun, 29 Aug 2010 15:08:44 +0000 (17:08 +0200)]
MIPS: AR7: Add support for Titan (TNETV10xx) SoC variant
Add support for Titan TNETV1050,1055,1056,1060 variants. This SoC is almost
completely identical to AR7 except on a few points:
- a second bank of gpios is available
- vlynq0 on titan is vlynq1 on ar7
- different PHY addresses for cpmac0
This SoC can be found on commercial products like the Linksys WRTP54G
Original patch by Xin with improvments by Florian.
Signed-off-by: Xin Zhen <xlonestar2000@aim.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/1563/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
Florian Fainelli [Sun, 29 Aug 2010 15:08:41 +0000 (17:08 +0200)]
MIPS: AR7: Initialize GPIO earlier
In order to detect the Titan variant, we must initialize GPIOs earlier since
detection relies on some GPIO values to be set.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/1562/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
David Daney [Fri, 8 Oct 2010 21:47:53 +0000 (14:47 -0700)]
MIPS: Add platform device and Kconfig for Octeon USB EHCI / OHCI
Declare that OCTEON reference boards have both OHCI and EHCI.
Add platform devices for the corresponding hardware.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-usb@vger.kernel.org
To: dbrownell@users.sourceforge.net
Patchwork: http://patchwork.linux-mips.org/patch/1676/
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Fri, 8 Oct 2010 21:47:52 +0000 (14:47 -0700)]
USB: Add EHCI and OHCH glue for OCTEON II SOCs.
The OCTEON II SOC has USB EHCI and OHCI controllers connected directly
to the internal I/O bus. This patch adds the necessary 'glue' logic
to allow ehci-hcd and ohci-hcd drivers to work on OCTEON II.
The OCTEON normally runs big-endian, and the ehci/ohci internal
registers have host endianness, so we need to select
USB_EHCI_BIG_ENDIAN_MMIO.
The ehci and ohci blocks share a common clocking and PHY
infrastructure. Initialization of the host controller and PHY clocks
is common between the two and is factored out into the
octeon2-common.c file.
Setting of USB_ARCH_HAS_OHCI and USB_ARCH_HAS_EHCI is done in
arch/mips/Kconfig in a following patch.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-usb@vger.kernel.org
To: dbrownell@users.sourceforge.net
Patchwork: http://patchwork.linux-mips.org/patch/1675/
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Fri, 8 Oct 2010 21:47:51 +0000 (14:47 -0700)]
MIPS: Octeon: Add register definitions for EHCI / OHCI USB glue logic.
The EHCI and OHCI blocks connection to the I/O bus is controlled by
these registers.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-usb@vger.kernel.org
To: dbrownell@users.sourceforge.net
Patchwork: http://patchwork.linux-mips.org/patch/1674/
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
create mode 100644 arch/mips/include/asm/octeon/cvmx-uctlx-defs.h
David Daney [Thu, 7 Oct 2010 23:03:53 +0000 (16:03 -0700)]
MIPS: Octeon: Apply CN63XXP1 errata workarounds.
The CN63XXP1 needs a couple of workarounds to ensure memory is not written
in unexpected ways.
All PREF with hints in the range 0-4,6-24 are replaced with PREF 28. We
pass a flag to the assembler to cover compiler generated code, and patch
uasm for the dynamically generated code.
The write buffer threshold is reduced to 4.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1672/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Thu, 7 Oct 2010 23:03:52 +0000 (16:03 -0700)]
WATCHDOG: octeon-wdt: Use I/O clock rate for timing calculations.
The creation of the I/O clock domain requires some adjustments. Since
the watchdog counters are clocked by the I/O clock, use its rate for
timing calculations.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-watchdog@vger.kernel.org
Patchwork: http://patchwork.linux-mips.org/patch/1659/
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Thu, 7 Oct 2010 23:03:51 +0000 (16:03 -0700)]
ATA: pata_octeon_cf: Use I/O clock rate for timing calculations.
The creation of the I/O clock domain requires some adjustments. Since the
CF bus timing logic is clocked by the I/O clock, use its rate for delay
calculations.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: linux-ide@vger.kernel.org
Patchwork: http://patchwork.linux-mips.org/patch/1660/
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Thu, 7 Oct 2010 23:03:50 +0000 (16:03 -0700)]
MIPS: Octeon: Use I/O clock rate for calculations.
The I2C and UARTS are clocked by the I/O clock, use its rate for these
devices.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1670/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Thu, 7 Oct 2010 23:03:49 +0000 (16:03 -0700)]
MIPS: Octeon: Add octeon_get_io_clock_rate() for cn63xx
Starting with cn63xx Octeon I/O blocks are clocked at a different rate
than the CPU. Add a new function octeon_get_io_clock_rate() that
yields the I/O clock rate.
Also rearrange octeon_get_clock_rate() to get the value from the saved
sysinfo structure.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1671/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Thu, 7 Oct 2010 23:03:48 +0000 (16:03 -0700)]
MIPS: Octeon: Remove bogus code from octeon_get_clock_rate()
We can run with any simulator clock rate. Get rid of the code
overriding it to 6MHz.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1669/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Thu, 7 Oct 2010 23:03:47 +0000 (16:03 -0700)]
MIPS: Octeon: Scale Octeon2 clocks in octeon_init_cvmcount()
The per-CPU clocks are synchronized from IPD_CLK_COUNT, on cn63XX it must
be scaled by the clock frequency ratio.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1667/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Thu, 7 Oct 2010 23:03:46 +0000 (16:03 -0700)]
MIPS: Octeon: Enable Read Inhibit / eXecute Inhibit on Octeon II.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1666/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Thu, 7 Oct 2010 23:03:45 +0000 (16:03 -0700)]
MIPS: Octeon: Probe for Octeon II CPUs.
The OCTEON II ISA extends the original OCTEON ISA, so give it its own
__elf_platform string so optimized libraries can be selected in
userspace.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1665/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Thu, 7 Oct 2010 23:03:44 +0000 (16:03 -0700)]
MIPS: Octeon: Handle Octeon II caches.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1664/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Thu, 7 Oct 2010 23:03:43 +0000 (16:03 -0700)]
MIPS: Add identifiers for Octeon II CPUs.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1662/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Thu, 7 Oct 2010 23:03:42 +0000 (16:03 -0700)]
MIPS: Octeon: Update L2 Cache code for CN63XX
The CN63XX has a different L2 cache architecture. Update the helper
functions to reflect this.
Some joining of split lines was also done to improve readability, as
well as reformatting of comments.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1663/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Thu, 7 Oct 2010 23:03:41 +0000 (16:03 -0700)]
MIPS: Octeon: Add cn63XX to Octeon chip detection macros.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1661/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Thu, 7 Oct 2010 23:03:40 +0000 (16:03 -0700)]
MIPS: Octeon: Update register definitions for CN63XX chips
The CN63XX is a new 6-CPU SOC based on the new OCTEON II CPU cores.
Join some lines back together. This makes some of them exceed 80
columns, but they are uninteresting and this unclutters things.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1668/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Fri, 1 Oct 2010 20:27:34 +0000 (13:27 -0700)]
MIPS: Octeon: Rewrite DMA mapping functions.
All Octeon chips can support more than 4GB of RAM. Also due to how Octeon
PCI is setup, even some configurations with less than 4GB of RAM will have
portions that are not accessible from 32-bit devices.
Enable the swiotlb code to handle the cases where a device cannot directly
do DMA. This is a complete rewrite of the Octeon DMA mapping code.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1639/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Fri, 1 Oct 2010 20:27:33 +0000 (13:27 -0700)]
MIPS: Add a platform hook for swiotlb setup.
This allows platforms that are using the swiotlb to initialize it.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1638/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Fri, 1 Oct 2010 20:27:32 +0000 (13:27 -0700)]
MIPS: Convert DMA to use dma-mapping-common.h
Use asm-generic/dma-mapping-common.h to handle all DMA mapping operations
and establish a default get_dma_ops() that forwards all operations to the
existing code.
Augment dev_archdata to carry a pointer to the struct dma_map_ops, allowing
DMA operations to be overridden on a per device basis. Currently this is
never filled in, so the default dma_map_ops are used. A follow-on patch
sets this for Octeon PCI devices.
Also initialize the dma_debug system as it is now used if it is configured.
Includes fixes by Kevin Cernekee <cernekee@gmail.com>.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1637/
Patchwork: http://patchwork.linux-mips.org/patch/1678/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Fri, 1 Oct 2010 20:27:31 +0000 (13:27 -0700)]
MIPS: ip32, ip27, jazz: Make static functions in dma-coherence.h inline.
Any function defined in a header file should be inline. This helps us
avoid 'unused' compiler warnings when we include the files in more
places in subsequent patches.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1636/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Fri, 1 Oct 2010 20:27:30 +0000 (13:27 -0700)]
MIPS: Octeon: Select ZONE_DMA32
Give us a nice place to allocate coherent DMA memory for 32-bit devices.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1635/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Fri, 1 Oct 2010 20:27:29 +0000 (13:27 -0700)]
MIPS: Octeon: Adjust top of DMA32 zone.
On OCTEON, we reserve the last 256MB of 32-bit PCI address space, mapping
the RAM in this region at a high DMA address. This makes memory in this
region unavailable for 32-bit DMA.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1634/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Fri, 1 Oct 2010 20:27:28 +0000 (13:27 -0700)]
MIPS: Allow MAX_DMA32_PFN to be overridden.
DMA mapping may reduce the usable physical address range usable for
32-bit DMA.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1633/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Fri, 1 Oct 2010 20:27:27 +0000 (13:27 -0700)]
MIPS: Octeon: Set dma_masks for octeon_mgmt device.
This allows follow-on patches to dma mapping functions to work with
the octeon mgmt device..
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1632/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
From: jiang.adam@gmail.com [Fri, 27 Aug 2010 09:32:06 +0000 (18:32 +0900)]
MIPS: IRQ: Add stackoverflow detection
Add stackoverflow detection to mips arch
Signed-off-by: Adam Jiang <jiang.adam@gmail.com>
Cc: dmitri.vorobiev@movial.com
Cc: wuzhangjin@gmail.com
Cc: ddaney@caviumnetworks.com
Cc: peterz@infradead.org
Cc: fweisbec@gmail.com
Cc: tj@kernel.org
Cc: tglx@linutronix.de
Cc: mingo@elte.hu
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1559/
Patchwork: https://patchwork.linux-mips.org/patch/1651/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 8 Sep 2010 13:39:14 +0000 (15:39 +0200)]
MIPS: Kconfig cleanup
arch/mips/Kconfig already sets GENERIC_HARDIRQS_NO__DO_IRQ unconditionally.
Remove the redundant select from the Loongson Kconfig.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Fri, 29 Oct 2010 18:08:25 +0000 (19:08 +0100)]
MIPS: Remove wait argument of r4k_on_each_cpu
All callers were passing in 1 anyway.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Fri, 29 Oct 2010 18:08:25 +0000 (19:08 +0100)]
MIPS: More detailed description of r4k_on_each_cpu
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Fri, 29 Oct 2010 18:08:24 +0000 (19:08 +0100)]
MIPS: Get rid of branches to .subsections.
It was a nice optimization - on paper at least. In practice it results in
branches that may exceed the maximum legal range for a branch. We can
fight that problem with -ffunction-sections but -ffunction-sections again
is incompatible with -pg used by the function tracer.
By rewriting the loop around all simple LL/SC blocks to C we reduce the
amount of inline assembler and at the same time allow GCC to often fill
the branch delay slots with something sensible or whatever else clever
optimization it may have up in its sleeve.
With this optimization gone we also no longer need -ffunction-sections,
so drop it.
This optimization was originally introduced in 2.6.21, commit
5999eca25c1fd4b9b9aca7833b04d10fe4bc877d (linux-mips.org) rsp.
f65e4fa8e0c6022ad58dc88d1b11b12589ed7f9f (kernel.org).
Original fix for the issues which caused me to pull this optimization by
Paul Gortmaker <paul.gortmaker@windriver.com>.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Linus Torvalds [Fri, 29 Oct 2010 17:37:27 +0000 (10:37 -0700)]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: Cleanup and thus reduce smb session structure and fields used during authentication
NTLM auth and sign - Use appropriate server challenge
cifs: add kfree() on error path
NTLM auth and sign - minor error corrections and cleanup
NTLM auth and sign - Use kernel crypto apis to calculate hashes and smb signatures
NTLM auth and sign - Define crypto hash functions and create and send keys needed for key exchange
cifs: cifs_convert_address() returns zero on error
NTLM auth and sign - Allocate session key/client response dynamically
cifs: update comments - [s/GlobalSMBSesLock/cifs_file_list_lock/g]
cifs: eliminate cifsInodeInfo->write_behind_rc (try #6)
[CIFS] Fix checkpatch warnings and bump cifs version number
cifs: wait for writeback to complete in cifs_flush
cifs: convert cifsFileInfo->count to non-atomic counter
Linus Torvalds [Fri, 29 Oct 2010 17:36:49 +0000 (10:36 -0700)]
readv/writev: do the same MAX_RW_COUNT truncation that read/write does
We used to protect against overflow, but rather than return an error, do
what read/write does, namely to limit the total size to MAX_RW_COUNT.
This is not only more consistent, but it also means that any broken
low-level read/write routine that still keeps counts in 'int' can't
break.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kyle McMartin [Fri, 29 Oct 2010 16:48:01 +0000 (12:48 -0400)]
parisc-agp: fix missing slab.h include
Commit
338e4fab added a missing kfree if the alloc_pci_dev failed
but forgot to include <linux/slab.h> for the definition of
kfree.
Signed-off-by: Kyle McMartin <kyle@redhat.com>
Linus Torvalds [Fri, 29 Oct 2010 15:49:18 +0000 (08:49 -0700)]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
[S390] fix kprobes single stepping
[S390] tape: fix dbf usage
[S390] dasd: provide a Sense Path Group ID ioctl
[S390] ftrace: select HAVE_C_RECORDMCOUNT
[S390] vdso: get rid of redefinition warnings
[S390] facility detection: remove unused variable
[S390] hypfs: Fix error handling in hypfs_diag initialization
[S390] topology: fix cpu masks for topology=off case
[S390] topology: add SCHED_MC config option
[S390] Kconfig: add machine type number to code generation options
[S390] Add z196 machine type to setup_hwcaps
Linus Torvalds [Fri, 29 Oct 2010 15:48:58 +0000 (08:48 -0700)]
Merge git://git./linux/kernel/git/pkl/squashfs-linus
* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus:
Squashfs: fix function prototype
Squashfs: fix use of __le64 annotated variable
Linus Torvalds [Fri, 29 Oct 2010 15:47:36 +0000 (08:47 -0700)]
Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md:
md: tidy up device searches in read_balance.
md/raid1: fix some typos in comments.
md/raid1: discard unused variable.
md: unplug writes to external bitmaps.
md: use separate bio pool for each md device.
md: change type of first arg to sync_page_io.
md/raid1: perform mem allocation before disabling writes during resync.
md: use bio_kmalloc rather than bio_alloc when failure is acceptable.
md: Fix possible deadlock with multiple mempool allocations.
md: fix and update workqueue usage
md: use sector_t in bitmap_get_counter
md: remove md_mutex locking.
md: Fix regression with raid1 arrays without persistent metadata.
Tyler Hicks [Fri, 15 Oct 2010 21:43:41 +0000 (16:43 -0500)]
eCryptfs: Print mount_auth_tok_only param in ecryptfs_show_options
When printing mount options, print the new ecryptfs_mount_auth_tok_only
mount option.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Roberto Sassu [Wed, 6 Oct 2010 16:31:32 +0000 (18:31 +0200)]
ecryptfs: added ecryptfs_mount_auth_tok_only mount parameter
This patch adds a new mount parameter 'ecryptfs_mount_auth_tok_only' to
force ecryptfs to use only authentication tokens which signature has
been specified at mount time with parameters 'ecryptfs_sig' and
'ecryptfs_fnek_sig'. In this way, after disabling the passthrough and
the encrypted view modes, it's possible to make available to users only
files encrypted with the specified authentication token.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Cc: Dustin Kirkland <kirkland@canonical.com>
Cc: James Morris <jmorris@namei.org>
[Tyler: Clean up coding style errors found by checkpatch]
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Roberto Sassu [Wed, 6 Oct 2010 16:31:15 +0000 (18:31 +0200)]
ecryptfs: checking return code of ecryptfs_find_auth_tok_for_sig()
This patch replaces the check of the 'matching_auth_tok' pointer with
the exit status of ecryptfs_find_auth_tok_for_sig().
This avoids to use authentication tokens obtained through the function
ecryptfs_keyring_auth_tok_for_sig which are not valid.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Cc: Dustin Kirkland <kirkland@canonical.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Roberto Sassu [Wed, 6 Oct 2010 16:31:06 +0000 (18:31 +0200)]
ecryptfs: release keys loaded in ecryptfs_keyring_auth_tok_for_sig()
This patch allows keys requested in the function
ecryptfs_keyring_auth_tok_for_sig()to be released when they are no
longer required. In particular keys are directly released in the same
function if the obtained authentication token is not valid.
Further, a new function parameter 'auth_tok_key' has been added to
ecryptfs_find_auth_tok_for_sig() in order to provide callers the key
pointer to be passed to key_put().
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Cc: Dustin Kirkland <kirkland@canonical.com>
Cc: James Morris <jmorris@namei.org>
[Tyler: Initialize auth_tok_key to NULL in ecryptfs_parse_packet_set]
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Tyler Hicks [Thu, 23 Sep 2010 07:35:04 +0000 (02:35 -0500)]
eCryptfs: Clear LOOKUP_OPEN flag when creating lower file
eCryptfs was passing the LOOKUP_OPEN flag through to the lower file
system, even though ecryptfs_create() doesn't support the flag. A valid
filp for the lower filesystem could be returned in the nameidata if the
lower file system's create() function supported LOOKUP_OPEN, possibly
resulting in unencrypted writes to the lower file.
However, this is only a potential problem in filesystems (FUSE, NFS,
CIFS, CEPH, 9p) that eCryptfs isn't known to support today.
https://bugs.launchpad.net/ecryptfs/+bug/641703
Reported-by: Kevin Buhr
Cc: stable <stable@kernel.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Roberto Sassu [Tue, 5 Oct 2010 16:53:45 +0000 (18:53 +0200)]
ecryptfs: call vfs_setxattr() in ecryptfs_setxattr()
Ecryptfs is a stackable filesystem which relies on lower filesystems the
ability of setting/getting extended attributes.
If there is a security module enabled on the system it updates the
'security' field of inodes according to the owned extended attribute set
with the function vfs_setxattr(). When this function is performed on a
ecryptfs filesystem the 'security' field is not updated for the lower
filesystem since the call security_inode_post_setxattr() is missing for
the lower inode.
Further, the call security_inode_setxattr() is missing for the lower inode,
leading to policy violations in the security module because specific
checks for this hook are not performed (i. e. filesystem
'associate' permission on SELinux is not checked for the lower filesystem).
This patch replaces the call of the setxattr() method of the lower inode
in the function ecryptfs_setxattr() with vfs_setxattr().
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Cc: stable <stable@kernel.org>
Cc: Dustin Kirkland <kirkland@canonical.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
projects / platform / kernel / linux-amlogic.git / log