Johannes Thumshirn [Wed, 31 May 2023 11:50:28 +0000 (04:50 -0700)]
md: use __bio_add_page to add single page
The md-raid superblock writing code uses bio_add_page() to add a page to a
newly created bio. bio_add_page() can fail, but the return value is never
checked.
Use __bio_add_page() as adding a single page to a newly created bio is
guaranteed to succeed.
This brings us a step closer to marking bio_add_page() as __must_check.
Signed-of_-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/ca196f5e650e318106dbb4496eb6cbac4bc800bd.1685532726.git.johannes.thumshirn@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Johannes Thumshirn [Wed, 31 May 2023 11:50:27 +0000 (04:50 -0700)]
fs: buffer: use __bio_add_page to add single page to bio
The buffer_head submission code uses bio_add_page() to add a page to a
newly created bio. bio_add_page() can fail, but the return value is never
checked.
Use __bio_add_page() as adding a single page to a newly created bio is
guaranteed to succeed.
This brings us a step closer to marking bio_add_page() as __must_check.
Reviewed-by: Gou Hao <gouhao@uniontech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/84ff2dcbe81b258a73ad900adb5266e208b61a4d.1685532726.git.johannes.thumshirn@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Johannes Thumshirn [Wed, 31 May 2023 11:50:26 +0000 (04:50 -0700)]
dm: dm-zoned: use __bio_add_page for adding single metadata page
dm-zoned uses bio_add_page() for adding a single page to a freshly created
metadata bio.
Use __bio_add_page() instead as adding a single page to a new bio is
always guaranteed to succeed.
This brings us a step closer to marking bio_add_page() __must_check
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/55a0c8dad7550379647873b579dc7cfbe0191f96.1685532726.git.johannes.thumshirn@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Johannes Thumshirn [Wed, 31 May 2023 11:50:25 +0000 (04:50 -0700)]
drbd: use __bio_add_page to add page to bio
The drbd code only adds a single page to a newly created bio. So use
__bio_add_page() to add the page which is guaranteed to succeed in this
case.
This brings us closer to marking bio_add_page() as __must_check.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/435007afac14f3766455559059d21843771fae53.1685532726.git.johannes.thumshirn@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Johannes Thumshirn [Wed, 31 May 2023 11:50:24 +0000 (04:50 -0700)]
swap: use __bio_add_page to add page to bio
The swap code only adds a single page to a newly created bio. So use
__bio_add_page() to add the page which is guaranteed to succeed in this
case.
This brings us closer to marking bio_add_page() as __must_check.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/5bdafd9de806b2dab92302b30eb7a3a5f10c37d9.1685532726.git.johannes.thumshirn@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Fri, 26 May 2023 21:41:42 +0000 (22:41 +0100)]
block: Use iov_iter_extract_pages() and page pinning in direct-io.c
Change the old block-based direct-I/O code to use iov_iter_extract_pages()
to pin user pages or leave kernel pages unpinned rather than taking refs
when submitting bios.
This makes use of the preceding patches to not take pins on the zero page
(thereby allowing insertion of zero pages in with pinned pages) and to get
additional pins on pages, allowing an extracted page to be used in multiple
bios without having to re-extract it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christoph Hellwig <hch@infradead.org>
cc: David Hildenbrand <david@redhat.com>
cc: Lorenzo Stoakes <lstoakes@gmail.com>
cc: Andrew Morton <akpm@linux-foundation.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Matthew Wilcox <willy@infradead.org>
cc: Jan Kara <jack@suse.cz>
cc: Jeff Layton <jlayton@kernel.org>
cc: Jason Gunthorpe <jgg@nvidia.com>
cc: Logan Gunthorpe <logang@deltatee.com>
cc: Hillf Danton <hdanton@sina.com>
cc: Christian Brauner <brauner@kernel.org>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-kernel@vger.kernel.org
cc: linux-mm@kvack.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230526214142.958751-4-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Fri, 26 May 2023 21:41:41 +0000 (22:41 +0100)]
mm: Provide a function to get an additional pin on a page
Provide a function to get an additional pin on a page that we already have
a pin on. This will be used in fs/direct-io.c when dispatching multiple
bios to a page we've extracted from a user-backed iter rather than redoing
the extraction.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christoph Hellwig <hch@infradead.org>
cc: David Hildenbrand <david@redhat.com>
cc: Lorenzo Stoakes <lstoakes@gmail.com>
cc: Andrew Morton <akpm@linux-foundation.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Matthew Wilcox <willy@infradead.org>
cc: Jan Kara <jack@suse.cz>
cc: Jeff Layton <jlayton@kernel.org>
cc: Jason Gunthorpe <jgg@nvidia.com>
cc: Logan Gunthorpe <logang@deltatee.com>
cc: Hillf Danton <hdanton@sina.com>
cc: Christian Brauner <brauner@kernel.org>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-kernel@vger.kernel.org
cc: linux-mm@kvack.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20230526214142.958751-3-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Fri, 26 May 2023 21:41:40 +0000 (22:41 +0100)]
mm: Don't pin ZERO_PAGE in pin_user_pages()
Make pin_user_pages*() leave a ZERO_PAGE unpinned if it extracts a pointer
to it from the page tables and make unpin_user_page*() correspondingly
ignore a ZERO_PAGE when unpinning. We don't want to risk overrunning a
zero page's refcount as we're only allowed ~2 million pins on it -
something that userspace can conceivably trigger.
Add a pair of functions to test whether a page or a folio is a ZERO_PAGE.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christoph Hellwig <hch@infradead.org>
cc: David Hildenbrand <david@redhat.com>
cc: Lorenzo Stoakes <lstoakes@gmail.com>
cc: Andrew Morton <akpm@linux-foundation.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Matthew Wilcox <willy@infradead.org>
cc: Jan Kara <jack@suse.cz>
cc: Jeff Layton <jlayton@kernel.org>
cc: Jason Gunthorpe <jgg@nvidia.com>
cc: Logan Gunthorpe <logang@deltatee.com>
cc: Hillf Danton <hdanton@sina.com>
cc: Christian Brauner <brauner@kernel.org>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-kernel@vger.kernel.org
cc: linux-mm@kvack.org
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20230526214142.958751-2-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Thomas Weißschuh [Tue, 30 May 2023 17:10:00 +0000 (19:10 +0200)]
block: constify the whole_disk device_attribute
The struct is never modified so it can be const.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230419-const-partition-v3-4-4e14e48be367@weissschuh.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Thomas Weißschuh [Tue, 30 May 2023 17:09:59 +0000 (19:09 +0200)]
block: constify struct part_attr_group
The struct is never modified so it can be const.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230419-const-partition-v3-3-4e14e48be367@weissschuh.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Thomas Weißschuh [Tue, 30 May 2023 17:09:58 +0000 (19:09 +0200)]
block: constify struct part_type part_type
The struct is never modified so it can be const.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230419-const-partition-v3-2-4e14e48be367@weissschuh.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Thomas Weißschuh [Tue, 30 May 2023 17:09:57 +0000 (19:09 +0200)]
block: constify partition prober array
The array is never modified so it can be const.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202304191640.SkNk7kVN-lkp@intel.com/
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230419-const-partition-v3-1-4e14e48be367@weissschuh.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 20:57:44 +0000 (21:57 +0100)]
block: convert bio_map_user_iov to use iov_iter_extract_pages
This will pin pages or leave them unaltered rather than getting a ref on
them as appropriate to the iterator.
The pages need to be pinned for DIO rather than having refs taken on them
to prevent VM copy-on-write from malfunctioning during a concurrent fork()
(the result of the I/O could otherwise end up being visible to/affected by
the child process).
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Jan Kara <jack@suse.cz>
cc: Matthew Wilcox <willy@infradead.org>
cc: Logan Gunthorpe <logang@deltatee.com>
cc: linux-block@vger.kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230522205744.2825689-7-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 20:57:43 +0000 (21:57 +0100)]
block: Convert bio_iov_iter_get_pages to use iov_iter_extract_pages
This will pin pages or leave them unaltered rather than getting a ref on
them as appropriate to the iterator.
The pages need to be pinned for DIO rather than having refs taken on them to
prevent VM copy-on-write from malfunctioning during a concurrent fork() (the
result of the I/O could otherwise end up being affected by/visible to the
child process).
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Jan Kara <jack@suse.cz>
cc: Matthew Wilcox <willy@infradead.org>
cc: Logan Gunthorpe <logang@deltatee.com>
cc: linux-block@vger.kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230522205744.2825689-6-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 20:57:42 +0000 (21:57 +0100)]
block: Add BIO_PAGE_PINNED and associated infrastructure
Add BIO_PAGE_PINNED to indicate that the pages in a bio are pinned
(FOLL_PIN) and that the pin will need removing.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Jan Kara <jack@suse.cz>
cc: Matthew Wilcox <willy@infradead.org>
cc: Logan Gunthorpe <logang@deltatee.com>
cc: linux-block@vger.kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230522205744.2825689-5-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Mon, 22 May 2023 20:57:41 +0000 (21:57 +0100)]
block: Replace BIO_NO_PAGE_REF with BIO_PAGE_REFFED with inverted logic
Replace BIO_NO_PAGE_REF with a BIO_PAGE_REFFED flag that has the inverted
meaning is only set when a page reference has been acquired that needs to
be released by bio_release_pages().
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Jan Kara <jack@suse.cz>
cc: Matthew Wilcox <willy@infradead.org>
cc: Logan Gunthorpe <logang@deltatee.com>
cc: linux-block@vger.kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230522205744.2825689-4-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 20:57:40 +0000 (21:57 +0100)]
block: Fix bio_flagged() so that gcc can better optimise it
Fix bio_flagged() so that multiple instances of it, such as:
if (bio_flagged(bio, BIO_PAGE_REFFED) ||
bio_flagged(bio, BIO_PAGE_PINNED))
can be combined by the gcc optimiser into a single test in assembly
(arguably, this is a compiler optimisation issue[1]).
The missed optimisation stems from bio_flagged() comparing the result of
the bitwise-AND to zero. This results in an out-of-line bio_release_page()
being compiled to something like:
<+0>: mov 0x14(%rdi),%eax
<+3>: test $0x1,%al
<+5>: jne 0xffffffff816dac53 <bio_release_pages+11>
<+7>: test $0x2,%al
<+9>: je 0xffffffff816dac5c <bio_release_pages+20>
<+11>: movzbl %sil,%esi
<+15>: jmp 0xffffffff816daba1 <__bio_release_pages>
<+20>: jmp 0xffffffff81d0b800 <__x86_return_thunk>
However, the test is superfluous as the return type is bool. Removing it
results in:
<+0>: testb $0x3,0x14(%rdi)
<+4>: je 0xffffffff816e4af4 <bio_release_pages+15>
<+6>: movzbl %sil,%esi
<+10>: jmp 0xffffffff816dab7c <__bio_release_pages>
<+15>: jmp 0xffffffff81d0b7c0 <__x86_return_thunk>
instead.
Also, the MOVZBL instruction looks unnecessary[2] - I think it's just
're-booling' the mark_dirty parameter.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: linux-block@vger.kernel.org
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108370
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108371
Link: https://lore.kernel.org/r/167391056756.2311931.356007731815807265.stgit@warthog.procyon.org.uk/
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230522205744.2825689-3-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 20:57:39 +0000 (21:57 +0100)]
iomap: Don't get an reference on ZERO_PAGE for direct I/O block zeroing
ZERO_PAGE can't go away, no need to hold an extra reference.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230522205744.2825689-2-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Wed, 24 May 2023 14:42:22 +0000 (08:42 -0600)]
Merge branch 'for-6.5/splice' into for-6.5/block
Merge splice bits as subsequent block cleanups and improvements for DIO
depend on them.
* for-6.5/splice: (31 commits)
splice: kdoc for filemap_splice_read() and copy_splice_read()
iov_iter: Kill ITER_PIPE
splice: Remove generic_file_splice_read()
splice: Use filemap_splice_read() instead of generic_file_splice_read()
cifs: Use filemap_splice_read()
trace: Convert trace/seq to use copy_splice_read()
zonefs: Provide a splice-read wrapper
xfs: Provide a splice-read wrapper
orangefs: Provide a splice-read wrapper
ocfs2: Provide a splice-read wrapper
ntfs3: Provide a splice-read wrapper
nfs: Provide a splice-read wrapper
f2fs: Provide a splice-read wrapper
ext4: Provide a splice-read wrapper
ecryptfs: Provide a splice-read wrapper
ceph: Provide a splice-read wrapper
afs: Provide a splice-read wrapper
9p: Add splice_read wrapper
net: Make sock_splice_read() use copy_splice_read() by default
tty, proc, kernfs, random: Use copy_splice_read()
...
David Howells [Mon, 22 May 2023 13:50:18 +0000 (14:50 +0100)]
splice: kdoc for filemap_splice_read() and copy_splice_read()
Provide kerneldoc comments for filemap_splice_read() and
copy_splice_read().
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christian Brauner <brauner@kernel.org>
cc: Christoph Hellwig <hch@lst.de>
cc: Jens Axboe <axboe@kernel.dk>
cc: Steve French <smfrench@gmail.com>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230522135018.2742245-32-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:50:17 +0000 (14:50 +0100)]
iov_iter: Kill ITER_PIPE
The ITER_PIPE-type iterator was only used by generic_file_splice_read() and
that has been replaced and removed. This leaves ITER_PIPE unused - so
remove it too.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230522135018.2742245-31-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:50:16 +0000 (14:50 +0100)]
splice: Remove generic_file_splice_read()
Remove generic_file_splice_read() as it has been replaced with calls to
filemap_splice_read() and copy_splice_read().
With this, ITER_PIPE is no longer used.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Steve French <smfrench@gmail.com>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230522135018.2742245-30-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:50:15 +0000 (14:50 +0100)]
splice: Use filemap_splice_read() instead of generic_file_splice_read()
Replace pointers to generic_file_splice_read() with calls to
filemap_splice_read().
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230522135018.2742245-29-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:50:14 +0000 (14:50 +0100)]
cifs: Use filemap_splice_read()
Make cifs use filemap_splice_read() rather than doing its own version of
generic_file_splice_read().
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Steve French <smfrench@gmail.com>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230522135018.2742245-28-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:50:13 +0000 (14:50 +0100)]
trace: Convert trace/seq to use copy_splice_read()
For the splice from the trace seq buffer, just use copy_splice_read().
In the future, something better can probably be done by gifting pages from
seq->buf into the pipe, but that would require changing seq->buf into a
vmap over an array of pages.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Steven Rostedt <rostedt@goodmis.org>
cc: Masami Hiramatsu <mhiramat@kernel.org>
cc: linux-kernel@vger.kernel.org
cc: linux-trace-kernel@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-27-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:50:12 +0000 (14:50 +0100)]
zonefs: Provide a splice-read wrapper
Provide a splice_read wrapper for zonefs. This does some checks before
proceeding and locks the inode across the call to filemap_splice_read() and
a size check in case of truncation. Splicing from direct I/O is handled by
the caller.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Darrick J. Wong <djwong@kernel.org>
cc: linux-xfs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230522135018.2742245-26-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:50:11 +0000 (14:50 +0100)]
xfs: Provide a splice-read wrapper
Provide a splice_read wrapper for XFS. This does a stat count and a
shutdown check before proceeding, then emits a new trace line and locks the
inode across the call to filemap_splice_read() and adds to the stats
afterwards. Splicing from direct I/O or DAX is handled by the caller.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Darrick J. Wong <djwong@kernel.org>
cc: linux-xfs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-25-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:50:10 +0000 (14:50 +0100)]
orangefs: Provide a splice-read wrapper
Provide a splice_read wrapper for ocfs2. This increments the read stats
and then locks the inode across the call to filemap_splice_read() and a
revalidation of the mapping. Splicing from direct I/O is done by the
caller.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Mike Marshall <hubcap@omnibond.com>
cc: Martin Brandenburg <martin@omnibond.com>
cc: devel@lists.orangefs.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-24-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:50:09 +0000 (14:50 +0100)]
ocfs2: Provide a splice-read wrapper
Provide a splice_read wrapper for ocfs2. This emits trace lines and does
an atime lock/update before calling filemap_splice_read(). Splicing from
direct I/O is handled by the caller.
A couple of new tracepoints are added for this purpose.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Mark Fasheh <mark@fasheh.com>
cc: Joel Becker <jlbec@evilplan.org>
cc: ocfs2-devel@oss.oracle.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-23-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:50:08 +0000 (14:50 +0100)]
ntfs3: Provide a splice-read wrapper
Provide a splice_read wrapper for NTFS3 to perform various checks before
allowing the operation to proceed.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
cc: ntfs3@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-22-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:50:07 +0000 (14:50 +0100)]
nfs: Provide a splice-read wrapper
Provide a splice_read wrapper for NFS. This locks the inode around
filemap_splice_read() and revalidates the mapping. Splicing from direct
I/O is handled by the caller.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Trond Myklebust <trond.myklebust@hammerspace.com>
cc: Anna Schumaker <anna@kernel.org>
cc: linux-nfs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-21-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:50:06 +0000 (14:50 +0100)]
f2fs: Provide a splice-read wrapper
Provide a splice_read wrapper for f2fs. This does some checks and tracing
before calling filemap_splice_read() and will update the iostats
afterwards. Direct I/O is handled by the caller.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Jaegeuk Kim <jaegeuk@kernel.org>
cc: Chao Yu <chao@kernel.org>
cc: linux-f2fs-devel@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-20-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:50:05 +0000 (14:50 +0100)]
ext4: Provide a splice-read wrapper
Provide a splice_read wrapper for Ext4. This does the inode shutdown check
before proceeding. Splicing from DAX files and O_DIRECT fds is handled by
the caller.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Theodore Ts'o <tytso@mit.edu>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Andreas Dilger <adilger.kernel@dilger.ca>
cc: linux-ext4@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-19-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:50:04 +0000 (14:50 +0100)]
ecryptfs: Provide a splice-read wrapper
Provide a splice_read wrapper for ecryptfs to update the access time on the
lower file after the operation. Splicing from a direct I/O fd will update
the access time when ->read_iter() is called.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Tyler Hicks <code@tyhicks.com>
cc: ecryptfs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-18-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:50:03 +0000 (14:50 +0100)]
ceph: Provide a splice-read wrapper
Provide a splice_read wrapper for Ceph. This does the inode shutdown check
before proceeding and jumps to copy_splice_read() if the file has inline
data or is a synchronous file.
We try and get FILE_RD and either FILE_CACHE and/or FILE_LAZYIO caps and
hold them across filemap_splice_read(). If we fail to get FILE_CACHE or
FILE_LAZYIO capabilities, we use copy_splice_read() instead.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: ceph-devel@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-17-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:50:02 +0000 (14:50 +0100)]
afs: Provide a splice-read wrapper
Provide a splice_read wrapper for AFS to call afs_validate() before going
into generic_file_splice_read() so that we're likely to have a callback
promise from the server.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-16-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:50:01 +0000 (14:50 +0100)]
9p: Add splice_read wrapper
Add a splice_read wrapper for 9p. We should use copy_splice_read() if
9PL_DIRECT is set and filemap_splice_read() otherwise. Note that this
doesn't seem to be particularly related to O_DIRECT.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: v9fs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-15-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:50:00 +0000 (14:50 +0100)]
net: Make sock_splice_read() use copy_splice_read() by default
Make sock_splice_read() use copy_splice_read() by default as
file_splice_read() will return immediately with 0 as a socket has no
pagecache and is a zero-size file.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: netdev@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-14-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:49:59 +0000 (14:49 +0100)]
tty, proc, kernfs, random: Use copy_splice_read()
Use copy_splice_read() for tty, procfs, kernfs and random files rather
than going through generic_file_splice_read() as they just copy the file
into the output buffer and don't splice pages. This avoids the need for
them to have a ->read_folio() to satisfy filemap_splice_read().
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: Christoph Hellwig <hch@lst.de>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: John Hubbard <jhubbard@nvidia.com>
cc: David Hildenbrand <david@redhat.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: Miklos Szeredi <miklos@szeredi.hu>
cc: Arnd Bergmann <arnd@arndb.de>
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-13-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:49:58 +0000 (14:49 +0100)]
coda: Implement splice-read
Implement splice-read for coda by passing the request down a layer rather
than going through generic_file_splice_read() which is going to be changed
to assume that ->read_folio() is present on buffered files.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jan Harkes <jaharkes@cs.cmu.edu>
cc: Christoph Hellwig <hch@lst.de>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: John Hubbard <jhubbard@nvidia.com>
cc: David Hildenbrand <david@redhat.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: coda@cs.cmu.edu
cc: codalist@coda.cs.cmu.edu
cc: linux-unionfs@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-12-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:49:57 +0000 (14:49 +0100)]
overlayfs: Implement splice-read
Implement splice-read for overlayfs by passing the request down a layer
rather than going through generic_file_splice_read() which is going to be
changed to assume that ->read_folio() is present on buffered files.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Christian Brauner <brauner@kernel.org>
cc: Christoph Hellwig <hch@lst.de>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: John Hubbard <jhubbard@nvidia.com>
cc: David Hildenbrand <david@redhat.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: Miklos Szeredi <miklos@szeredi.hu>
cc: Amir Goldstein <amir73il@gmail.com>
cc: linux-unionfs@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-11-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:49:56 +0000 (14:49 +0100)]
shmem: Implement splice-read
The new filemap_splice_read() has an implicit expectation via
filemap_get_pages() that ->read_folio() exists if ->readahead() doesn't
fully populate the pagecache of the file it is reading from[1], potentially
leading to a jump to NULL if this doesn't exist. shmem, however, (and by
extension, tmpfs, ramfs and rootfs), doesn't have ->read_folio(),
Work around this by equipping shmem with its own splice-read
implementation, based on filemap_splice_read(), but able to paste in
zero_page when there's a page missing.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Daniel Golle <daniel@makrotopia.org>
cc: Guenter Roeck <groeck7@gmail.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: John Hubbard <jhubbard@nvidia.com>
cc: David Hildenbrand <david@redhat.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: Hugh Dickins <hughd@google.com>
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/Y+pdHFFTk1TTEBsO@makrotopia.org/
Link: https://lore.kernel.org/r/20230522135018.2742245-10-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:49:55 +0000 (14:49 +0100)]
splice: Make splice from a DAX file use copy_splice_read()
Make a read splice from a DAX file go directly to copy_splice_read() to do
the reading as filemap_splice_read() is unlikely to find any pagecache to
splice.
I think this affects only erofs, Ext2, Ext4, fuse and XFS.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: linux-erofs@lists.ozlabs.org
cc: linux-ext4@vger.kernel.org
cc: linux-xfs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-9-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:49:54 +0000 (14:49 +0100)]
splice: Make splice from an O_DIRECT fd use copy_splice_read()
Make a read splice from a file descriptor that's open O_DIRECT use
copy_splice_read() to do the reading as filemap_splice_read() is unlikely
to find any pagecache to splice.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-8-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:49:53 +0000 (14:49 +0100)]
splice: Check for zero count in vfs_splice_read()
Make vfs_splice_read() return immediately if the length is 0.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-7-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:49:52 +0000 (14:49 +0100)]
splice: Make do_splice_to() generic and export it
Rename do_splice_to() to vfs_splice_read() and export it so that it can be
used as a helper when calling down to a lower layer filesystem as it
performs all the necessary checks[1].
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Miklos Szeredi <miklos@szeredi.hu>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: John Hubbard <jhubbard@nvidia.com>
cc: David Hildenbrand <david@redhat.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-unionfs@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/CAJfpeguGksS3sCigmRi9hJdUec8qtM9f+_9jC1rJhsXT+dV01w@mail.gmail.com/
Link: https://lore.kernel.org/r/20230522135018.2742245-6-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:49:51 +0000 (14:49 +0100)]
splice: Clean up copy_splice_read() a bit
Do a couple of cleanups to copy_splice_read():
(1) Cast to struct page **, not void *.
(2) Simplify the calculation of the number of pages to keep/reclaim in
copy_splice_read().
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230522135018.2742245-5-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:49:50 +0000 (14:49 +0100)]
splice: Rename direct_splice_read() to copy_splice_read()
Rename direct_splice_read() to copy_splice_read() to better reflect as to
what it does.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Steve French <sfrench@samba.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230522135018.2742245-4-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:49:49 +0000 (14:49 +0100)]
splice: Make filemap_splice_read() check s_maxbytes
Make filemap_splice_read() check s_maxbytes analogously to filemap_read().
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Steve French <stfrench@microsoft.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230522135018.2742245-3-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Howells [Mon, 22 May 2023 13:49:48 +0000 (14:49 +0100)]
splice: Fix filemap_splice_read() to use the correct inode
Fix filemap_splice_read() to use file->f_mapping->host, not file->f_inode,
as the source of the file size because in the case of a block device,
file->f_inode points to the block-special file (which is typically 0
length) and not the backing store.
Fixes:
07073eb01c5f ("splice: Add a func to do a splice from a buffered file without ITER_PIPE")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Steve French <stfrench@microsoft.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230522135018.2742245-2-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hengqi Chen [Sat, 20 May 2023 08:40:57 +0000 (08:40 +0000)]
block: introduce block_io_start/block_io_done tracepoints
Currently, several BCC ([0]) tools (biosnoop/biostacks/biotop) use
kprobes to blk_account_io_start/blk_account_io_done to implement
their functionalities. This is fragile because the target kernel
functions may be renamed ([1]) or inlined ([2]). So introduce two
new tracepoints for such use cases.
[0]: https://github.com/iovisor/bcc
[1]: https://github.com/iovisor/bcc/issues/3954
[2]: https://github.com/iovisor/bcc/issues/4261
Tested-by: Francis Laniel <flaniel@linux.microsoft.com>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Tested-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230520084057.1467003-1-hengqi.chen@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Yu Kuai [Fri, 14 Apr 2023 08:40:08 +0000 (16:40 +0800)]
block/rq_qos: protect rq_qos apis with a new lock
commit
50e34d78815e ("block: disable the elevator int del_gendisk")
move rq_qos_exit() from disk_release() to del_gendisk(), this will
introduce some problems:
1) If rq_qos_add() is triggered by enabling iocost/iolatency through
cgroupfs, then it can concurrent with del_gendisk(), it's not safe to
write 'q->rq_qos' concurrently.
2) Activate cgroup policy that is relied on rq_qos will call
rq_qos_add() and blkcg_activate_policy(), and if rq_qos_exit() is
called in the middle, null-ptr-dereference will be triggered in
blkcg_activate_policy().
3) blkg_conf_open_bdev() can call blkdev_get_no_open() first to find the
disk, then if rq_qos_exit() from del_gendisk() is done before
rq_qos_add(), then memory will be leaked.
This patch add a new disk level mutex 'rq_qos_mutex':
1) The lock will protect rq_qos_exit() directly.
2) For wbt that doesn't relied on blk-cgroup, rq_qos_add() can only be
called from disk initialization for now because wbt can't be
destructed until rq_qos_exit(), so it's safe not to protect wbt for
now. Hoever, in case that rq_qos dynamically destruction is supported
in the furture, this patch also protect rq_qos_add() from wbt_init()
directly, this is enough because blk-sysfs already synchronize
writers with disk removal.
3) For iocost and iolatency, in order to synchronize disk removal and
cgroup configuration, the lock is held after blkdev_get_no_open()
from blkg_conf_open_bdev(), and is released in blkg_conf_exit().
In order to fix the above memory leak, disk_live() is checked after
holding the new lock.
Fixes:
50e34d78815e ("block: disable the elevator int del_gendisk")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230414084008.2085155-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Li Nan [Mon, 22 May 2023 08:53:55 +0000 (16:53 +0800)]
block: remove redundant req_op in blk_rq_is_passthrough
op &= REQ_OP_MASK in blk_op_is_passthrough() is exactly what req_op() do.
Therefore, it is redundant to call req_op() for blk_op_is_passthrough().
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230522085355.1740772-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Sat, 20 May 2023 15:11:34 +0000 (23:11 +0800)]
ublk: fix build warning on iov_iter_get_pages2
Return type of iov_iter_get_pages2() is ssize_t instead of size_t, so
fix it.
Fixes:
981f95a571e3 ("ublk: cleanup ublk_copy_user_pages")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230520151134.459679-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Sat, 20 May 2023 04:45:03 +0000 (06:45 +0200)]
block: don't plug in blkdev_write_iter
For direct I/O writes that issues more than a single bio, the plugging
is already done in __blkdev_direct_IO.
For synchronous buffered writes the plugging is done deep down in
writeback_inodes_wb / wb_writeback.
For the other cases there is no point in plugging as as single bio or no
bio at all is submitted.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230520044503.334444-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Fri, 19 May 2023 22:03:46 +0000 (15:03 -0700)]
block: BFQ: Move an invariant check
Check bfqq->dispatched for each BFQ queue instead of checking it for an
invalid bfqq pointer.
Fixes:
3e49c1e4a615 ("block: BFQ: Add several invariant checks")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230519220347.3643295-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Fri, 19 May 2023 06:50:30 +0000 (14:50 +0800)]
ublk: support user copy
Currently copy between io request buffer(pages) and userspace buffer is
done inside ublk_map_io() or ublk_unmap_io(). This way performs very
well in case of pre-allocated userspace io buffer.
For dynamically allocated or external userspace backend io buffer,
UBLK_F_NEED_GET_DATA is added for ublk server to provide buffer by one
extra command communication for WRITE request. For READ, userspace
simply provides buffer, but can't know when the buffer is done[1].
Add UBLK_F_USER_COPY by moving io data copy out of kernel by providing
read()/write() on /dev/ublkcN, and simply let ublk server do the io
data copy. This way makes both side cleaner, the cost is that one extra
syscall for copy io data between request and backend buffer.
With UBLK_F_USER_COPY, it actually becomes possible to run per-io zero
copy now, such as, only do zero copy for big size IO, so it can be
thought as one prep patch for supporting zero copy. Meantime zero copy
still needs to expose read()/write() buffer for some corner case, such
as passthrough IO.
[1] READ buffer in UBLK_F_NEED_GET_DATA
https://lore.kernel.org/linux-block/
116d8a56-0881-56d3-9bcc-
78ff3e1dc4e5@linux.alibaba.com/T/#m23bd4b8634c0a054e6797063167b469949a247bb
ublksrv loop usercopy code:
https://github.com/ming1/ubdsrv/commits/usercopy
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230519065030.351216-8-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Fri, 19 May 2023 06:50:29 +0000 (14:50 +0800)]
ublk: add read()/write() support for ublk char device
Support pread()/pwrite() on ublk char device for reading/writing request
io buffer, so data copy between io request buffer and userspace buffer
can be moved to ublk server from ublk driver. Then UBLK_F_NEED_GET_DATA
becomes not necessary, so ublk server can allocate buffer without one
extra round uring command communication for userspace to provide buffer.
IO buffer can be located by iocb->ki_pos which encodes buffer offset, io
tag and queue id info, and type of iocb->ki_pos is u64, so it is big
enough for holding reasonable queue depth, nr_queues and max io buffer
size.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230519065030.351216-7-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Fri, 19 May 2023 06:50:28 +0000 (14:50 +0800)]
ublk: support to copy any part of request pages
Add 'offset' to 'struct ublk_map_data', so that ublk_copy_user_pages()
can be used to copy any sub-buffer(linear mapped) of the request.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230519065030.351216-6-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Fri, 19 May 2023 06:50:27 +0000 (14:50 +0800)]
ublk: grab request reference when the request is handled by userspace
Add one reference counter into request pdu data, and hold this reference
in the request's lifetime.
Prepare for supporting to move request data copy into userspace, which
needs to copy request data by read()/write() on /dev/ublkcN, so we have
to guarantee that read()/write() is done on one valid/active request,
and that will be enhanced by holding the io request reference in
read()/write().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230519065030.351216-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Fri, 19 May 2023 06:50:26 +0000 (14:50 +0800)]
ublk: cleanup ublk_copy_user_pages
Clean up ublk_copy_user_pages() by using iov_iter_get_pages2, and code
gets simplified a lot and becomes much more readable than before.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230519065030.351216-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Fri, 19 May 2023 06:50:25 +0000 (14:50 +0800)]
ublk: cleanup io cmd code path by adding ublk_fill_io_cmd()
Add one small helper to cleanup io command hanlding code path.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230519065030.351216-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Fri, 19 May 2023 06:50:24 +0000 (14:50 +0800)]
ublk: kill queuing request by task_work_add
task_work_add() is used from early ublk development stage for handling
request in batch. However, since commit
7d4a93176e01 ("ublk_drv: don't
forward io commands in reserve order"), we can get similar batch
processing with io_uring_cmd_complete_in_task(), and similar performance
data is observed between task_work_add() and
io_uring_cmd_complete_in_task().
Meantime we can kill one fast code path, which is actually seldom used
given it is common to build ublk driver as module.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230519065030.351216-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 19 May 2023 04:40:50 +0000 (06:40 +0200)]
blk-mq: don't use the requeue list to queue flush commands
Currently both requeues of commands that were already sent to the driver
and flush commands submitted from the flush state machine share the same
requeue_list struct request_queue, despite requeues doing head
insertions and flushes not. Switch to using two separate lists instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230519044050.107790-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 19 May 2023 04:40:49 +0000 (06:40 +0200)]
blk-mq: do not do head insertions post-pre-flush commands
blk_flush_complete_seq currently queues requests that write data after
a pre-flush from the flush state machine at the head of the queue.
This doesn't really make sense, as the original request bypassed all
queue lists by directly diverting to blk_insert_flush from
blk_mq_submit_bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230519044050.107790-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 19 May 2023 04:40:48 +0000 (06:40 +0200)]
blk-mq: defer to the normal submission path for post-flush requests
Requests with the FUA bit on hardware without FUA support need a post
flush before returning to the caller, but they can still be sent using
the normal I/O path after initializing the flush-related fields and
end I/O handler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230519044050.107790-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Fri, 19 May 2023 04:40:47 +0000 (06:40 +0200)]
blk-mq: use the I/O scheduler for writes from the flush state machine
Send write requests issued by the flush state machine through the normal
I/O submission path including the I/O scheduler (if present) so that I/O
scheduler policies are applied to writes with the FUA flag set.
Separate the I/O scheduler members from the flush members in struct
request since now a request may pass through both an I/O scheduler
and the flush machinery.
Note that the actual flush requests, which have no bio attached to the
request still bypass the I/O schedulers.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
[hch: rebased]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230519044050.107790-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 19 May 2023 04:40:46 +0000 (06:40 +0200)]
blk-mq: defer to the normal submission path for non-flush flush commands
If blk_insert_flush decides that a command does not need to use the
flush state machine, return false and let blk_mq_submit_bio handle
it the normal way (including using an I/O scheduler) instead of doing
a bypass insert.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230519044050.107790-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 19 May 2023 04:40:45 +0000 (06:40 +0200)]
blk-mq: reflow blk_insert_flush
Use a switch statement to decide on the disposition of a flush request
instead of multiple if statements, out of which one does checks that are
more complex than required. Also warn on a malformed request early
on instead of doing a BUG_ON later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230519044050.107790-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 19 May 2023 04:40:44 +0000 (06:40 +0200)]
blk-mq: factor out a blk_rq_init_flush helper
Factor out a helper from blk_insert_flush that initializes the flush
machine related fields in struct request, and don't bother with the
full memset as there's just a few fields to initialize, and all but
one already have explicit initializers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230519044050.107790-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Mon, 8 May 2023 14:44:05 +0000 (07:44 -0700)]
fs: remove the special !CONFIG_BLOCK def_blk_fops
def_blk_fops always returns -ENODEV, which dosn't match the return value
of a non-existing block device with CONFIG_BLOCK, which is -ENXIO.
Just remove the extra implementation and fall back to the default
no_open_fops that always returns -ENXIO.
Fixes:
9361401eb761 ("[PATCH] BLOCK: Make it possible to disable the block layer [try #6]")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230508144405.41792-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Tue, 16 May 2023 22:38:53 +0000 (15:38 -0700)]
block: BFQ: Add several invariant checks
If anything goes wrong with the counters that track the number of
requests, I/O locks up. Make such scenarios easier to debug by adding
invariant checks for the request counters. Additionally, check that
BFQ queues are empty before these are freed.
Cc: Jan Kara <jack@suse.cz>
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230516223853.1385255-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Wed, 17 May 2023 17:42:29 +0000 (10:42 -0700)]
block: mq-deadline: Fix handling of at-head zoned writes
Before dispatching a zoned write from the FIFO list, check whether there
are any zoned writes in the RB-tree with a lower LBA for the same zone.
This patch ensures that zoned writes happen in order even if at_head is
set for some writes for a zone and not for others.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230517174230.897144-12-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Wed, 17 May 2023 17:42:28 +0000 (10:42 -0700)]
block: mq-deadline: Handle requeued requests correctly
Start dispatching from the start of a zone instead of from the starting
position of the most recently dispatched request.
If a zoned write is requeued with an LBA that is lower than already
inserted zoned writes, make sure that it is submitted first.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230517174230.897144-11-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Wed, 17 May 2023 17:42:27 +0000 (10:42 -0700)]
block: mq-deadline: Track the dispatch position
Track the position (sector_t) of the most recently dispatched request
instead of tracking a pointer to the next request to dispatch. This
patch is the basis for patch "Handle requeued requests correctly".
Without this patch it would be significantly more complicated to make
sure that zoned writes are dispatched in LBA order per zone.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230517174230.897144-10-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Wed, 17 May 2023 17:42:26 +0000 (10:42 -0700)]
block: mq-deadline: Reduce lock contention
blk_mq_free_requests() calls dd_finish_request() indirectly. Prevent
nested locking of dd->lock and dd->zone_lock by moving the code for
freeing requests.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230517174230.897144-9-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Wed, 17 May 2023 17:42:25 +0000 (10:42 -0700)]
block: mq-deadline: Simplify deadline_skip_seq_writes()
Make the deadline_skip_seq_writes() code shorter without changing its
functionality.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230517174230.897144-8-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Wed, 17 May 2023 17:42:24 +0000 (10:42 -0700)]
block: mq-deadline: Clean up deadline_check_fifo()
Change the return type of deadline_check_fifo() from 'int' into 'bool'.
Use time_is_before_eq_jiffies() instead of time_after_eq(). No
functionality has been changed.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230517174230.897144-7-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Wed, 17 May 2023 17:42:23 +0000 (10:42 -0700)]
block: Introduce blk_rq_is_seq_zoned_write()
Introduce the function blk_rq_is_seq_zoned_write(). This function will
be used in later patches to preserve the order of zoned writes that
require write serialization.
This patch includes an optimization: instead of using
rq->q->disk->part0->bd_queue to check whether or not the queue is
associated with a zoned block device, use rq->q->disk->queue.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230517174230.897144-6-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Wed, 17 May 2023 17:42:22 +0000 (10:42 -0700)]
block: Introduce op_needs_zoned_write_locking()
Introduce a helper function for checking whether write serialization is
required if the operation will be sent to a zoned device. A second caller
for op_needs_zoned_write_locking() will be introduced in the next patch
in this series.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230517174230.897144-5-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Wed, 17 May 2023 17:42:21 +0000 (10:42 -0700)]
block: Fix the type of the second bdev_op_is_zoned_write() argument
Change the type of the second argument of bdev_op_is_zoned_write() from
blk_opf_t into enum req_op because this function expects an operation
without flags as second argument.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Fixes:
8cafdb5ab94c ("block: adapt blk_mq_plug() to not plug for writes that require a zone lock")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230517174230.897144-4-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Wed, 17 May 2023 17:42:20 +0000 (10:42 -0700)]
block: Simplify blk_req_needs_zone_write_lock()
Remove the blk_rq_is_passthrough() check because it is redundant:
blk_req_needs_zone_write_lock() also calls bdev_op_is_zoned_write()
and the latter function returns false for pass-through requests.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230517174230.897144-3-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Wed, 17 May 2023 17:42:19 +0000 (10:42 -0700)]
block: mq-deadline: Add a word in a source code comment
Add the missing word "and".
Cc: Damien Le Moal <dlemoal@kernel.org>
Suggested-by: Damien Le Moal <dlemoal@kernel.org>
Fixes:
945ffb60c11d ("mq-deadline: add blk-mq adaptation of the deadline IO scheduler")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230517174230.897144-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Thu, 18 May 2023 05:31:01 +0000 (07:31 +0200)]
blk-mq: make sure elevator callbacks aren't called for passthrough request
In case of q->elevator, passthrough request can still be marked as
RQF_ELV, so some elevator callbacks will be called for them.
Fix this by splitting RQF_SCHED_TAGS, which is set for all requests that
are issued on a queue that uses an I/O scheduler, and RQF_USE_SCHED for
non-flush, non-passthrough requests on such a queue.
Roughly based on two different patches from
Ming Lei <ming.lei@redhat.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230518053101.760632-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Thu, 18 May 2023 05:31:00 +0000 (07:31 +0200)]
blk-mq: remove RQF_ELVPRIV
RQF_ELVPRIV is set for all non-flush requests that have RQF_ELV set.
Expand this condition in the two users of the flag and remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230518053101.760632-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Thu, 18 May 2023 05:30:59 +0000 (07:30 +0200)]
blk-mq: don't queue plugged passthrough requests into scheduler
Passthrough requests should never be queued to the I/O scheduler,
as scheduling these opaque requests doesn't make sense, and I/O
schedulers might require req->bio to be always valid.
We never let passthrough requests insert into the scheduler before
commit
1c2d2fff6dc0 ("block: wire-up support for passthrough plugging"),
restore this behavior even for passthrough requests issued under a plug.
[hch: use blk_mq_insert_requests for passthrough requests,
fix up the commit message and comments]
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Closes: https://lore.kernel.org/linux-block/CAGS2=YosaYaUTEMU3uaf+y=8MqSrhL7sYsJn8EwbaM=76p_4Qg@mail.gmail.com/
Investigated-by: Yu Kuai <yukuai1@huaweicloud.com>
Fixes:
1c2d2fff6dc0 ("block: wire-up support for passthrough plugging")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230518053101.760632-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Thu, 18 May 2023 22:27:08 +0000 (15:27 -0700)]
block: Decode all flag names in the debugfs output
See also:
* Commit
4d337cebcb1c ("blk-mq: avoid to touch q->elevator without any protection").
* Commit
414dd48e882c ("blk-mq: add tagset quiesce interface").
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230518222708.1190867-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pankaj Raghav [Thu, 11 May 2023 12:15:44 +0000 (14:15 +0200)]
brd: use XArray instead of radix-tree to index backing pages
XArray was introduced to hold large array of pointers with a simple API.
XArray API also provides array semantics which simplifies the way we store
and access the backing pages, and the code becomes significantly easier
to understand.
No performance difference was noticed between the two implementation
using fio with direct=1 [1].
[1] Performance in KIOPS:
| radix-tree | XArray | Diff
| | |
write | 315 | 313 | -0.6%
randwrite | 286 | 290 | +1.3%
read | 330 | 335 | +1.5%
randread | 309 | 312 | +0.9%
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20230511121544.111648-1-p.raghav@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Sun, 14 May 2023 19:51:40 +0000 (12:51 -0700)]
Linux 6.4-rc2
Linus Torvalds [Sun, 14 May 2023 19:32:34 +0000 (12:32 -0700)]
Merge tag 'cxl-fixes-6.4-rc2' of git://git./linux/kernel/git/cxl/cxl
Pull compute express link fixes from Dan Williams:
- Fix a compilation issue with DEFINE_STATIC_SRCU() in the unit tests
- Fix leaking kernel memory to a root-only sysfs attribute
* tag 'cxl-fixes-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Add missing return to cdat read error path
tools/testing/cxl: Use DEFINE_STATIC_SRCU()
Linus Torvalds [Sun, 14 May 2023 16:54:38 +0000 (09:54 -0700)]
Merge tag 'parisc-for-6.4-2' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- Fix encoding of swp_entry due to added SWP_EXCLUSIVE flag
- Include reboot.h to avoid gcc-12 compiler warning
* tag 'parisc-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix encoding of swp_entry due to added SWP_EXCLUSIVE flag
parisc: kexec: include reboot.h
Linus Torvalds [Sun, 14 May 2023 16:17:32 +0000 (09:17 -0700)]
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
- fix unwinder for uleb128 case
- fix kernel-doc warnings for HP Jornada 7xx
- fix unbalanced stack on vfp success path
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9297/1: vfp: avoid unbalanced stack on 'success' return path
ARM: 9296/1: HP Jornada 7XX: fix kernel-doc warnings
ARM: 9295/1: unwind:fix unwind abort for uleb128 case
Linus Torvalds [Sun, 14 May 2023 15:00:46 +0000 (08:00 -0700)]
Merge tag 'locking_urgent_for_v6.4_rc2' of git://git./linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Make sure __down_read_common() is always inlined so that the callers'
names land in traceevents output and thus the blocked function can be
identified
* tag 'locking_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Add __always_inline annotation to __down_read_common() and inlined callers
Linus Torvalds [Sun, 14 May 2023 14:56:51 +0000 (07:56 -0700)]
Merge tag 'perf_urgent_for_v6.4_rc2' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Make sure the PEBS buffer is flushed before reprogramming the
hardware so that the correct record sizes are used
- Update the sample size for AMD BRS events
- Fix a confusion with using the same on-stack struct with different
events in the event processing path
* tag 'perf_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG
perf/x86: Fix missing sample size update on AMD BRS
perf/core: Fix perf_sample_data not properly initialized for different swevents in perf_tp_event()
Linus Torvalds [Sun, 14 May 2023 14:50:34 +0000 (07:50 -0700)]
Merge tag 'sched_urgent_for_v6.4_rc2' of git://git./linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Fix a couple of kernel-doc warnings
* tag 'sched_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: fix cid_lock kernel-doc warnings
Linus Torvalds [Sun, 14 May 2023 14:44:48 +0000 (07:44 -0700)]
Merge tag 'x86_urgent_for_v6.4_rc2' of git://git./linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
- Add the required PCI IDs so that the generic SMN accesses provided by
amd_nb.c work for drivers which switch to them. Add a PCI device ID
to k10temp's table so that latter is loaded on such systems too
* tag 'x86_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hwmon: (k10temp) Add PCI ID for family 19, model 78h
x86/amd_nb: Add PCI ID for family 19h model 78h
Linus Torvalds [Sun, 14 May 2023 14:39:15 +0000 (07:39 -0700)]
Merge tag 'timers_urgent_for_v6.4_rc2' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Prevent CPU state corruption when an active clockevent broadcast
device is replaced while the system is already in oneshot mode
* tag 'timers_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/broadcast: Make broadcast device replacement work correctly
Linus Torvalds [Sun, 14 May 2023 00:45:39 +0000 (17:45 -0700)]
Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Some ext4 bug fixes (mostly to address Syzbot reports)"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: bail out of ext4_xattr_ibody_get() fails for any reason
ext4: add bounds checking in get_max_inline_xattr_value_size()
ext4: add indication of ro vs r/w mounts in the mount message
ext4: fix deadlock when converting an inline directory in nojournal mode
ext4: improve error recovery code paths in __ext4_remount()
ext4: improve error handling from ext4_dirhash()
ext4: don't clear SB_RDONLY when remounting r/w until quota is re-enabled
ext4: check iomap type only if ext4_iomap_begin() does not fail
ext4: avoid a potential slab-out-of-bounds in ext4_group_desc_csum
ext4: fix data races when using cached status extents
ext4: avoid deadlock in fs reclaim with page writeback
ext4: fix invalid free tracking in ext4_xattr_move_to_block()
ext4: remove a BUG_ON in ext4_mb_release_group_pa()
ext4: allow ext4_get_group_info() to fail
ext4: fix lockdep warning when enabling MMP
ext4: fix WARNING in mb_find_extent
Linus Torvalds [Sun, 14 May 2023 00:41:58 +0000 (17:41 -0700)]
Merge tag 'fbdev-for-6.4-rc2' of git://git./linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
- use after free fix in imsttfb (Zheng Wang)
- fix error handling in arcfb (Zongjie Li)
- lots of whitespace cleanups (Thomas Zimmermann)
- add 1920x1080 modedb entry (me)
* tag 'fbdev-for-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: stifb: Fix info entry in sti_struct on error path
fbdev: modedb: Add 1920x1080 at 60 Hz video mode
fbdev: imsttfb: Fix use after free bug in imsttfb_probe
fbdev: vfb: Remove trailing whitespaces
fbdev: valkyriefb: Remove trailing whitespaces
fbdev: stifb: Remove trailing whitespaces
fbdev: sa1100fb: Remove trailing whitespaces
fbdev: platinumfb: Remove trailing whitespaces
fbdev: p9100: Remove trailing whitespaces
fbdev: maxinefb: Remove trailing whitespaces
fbdev: macfb: Remove trailing whitespaces
fbdev: hpfb: Remove trailing whitespaces
fbdev: hgafb: Remove trailing whitespaces
fbdev: g364fb: Remove trailing whitespaces
fbdev: controlfb: Remove trailing whitespaces
fbdev: cg14: Remove trailing whitespaces
fbdev: atmel_lcdfb: Remove trailing whitespaces
fbdev: 68328fb: Remove trailing whitespaces
fbdev: arcfb: Fix error handling in arcfb_probe()
Linus Torvalds [Sun, 14 May 2023 00:37:32 +0000 (17:37 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"A single small fix for the UFS driver to fix a power management
failure"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix I/O hang that occurs when BKOPS fails in W-LUN suspend