review.tizen.org Git - platform/kernel/linux-rpi.git/log

Revert "dpaa_eth: fix error in dpaa_remove()"

This reverts commit 5bbb99d2fde047df596379be6c58e265e2ddbe1f which is
commit 88075256ee817041d68c2387f29065b5cb2b342a upstream.

Jiri writes that this was an incorrect fix, and Madalin-cristian says it
was fixed differently in a later patch. So just revert this from
4.14.y.

Reported-by: Jiri Slaby <jslaby@suse.cz>
Cc: Madalin Bucur <madalin.bucur@nxp.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: truncate preallocated blocks in error case

commit dc7a10ddee0c56c6d891dd18de5c4ee9869545e0 upstream.

If write is failed, we must deallocate the blocks that we couldn't write.

Cc: stable@vger.kernel.org
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: vb2: core: Finish buffers at the end of the stream

commit 03703ed1debf777ea845aa9b50ba2e80a5e7dd3c upstream.

If buffers were prepared or queued and the buffers were released without
starting the queue, the finish mem op (corresponding to the prepare mem
op) was never called to the buffers.

Before commit a136f59c0a1f there was no need to do this as in such a case
the prepare mem op had not been called yet. Address the problem by
explicitly calling finish mem op when the queue is stopped if the buffer
is in either prepared or queued state.

Fixes: a136f59c0a1f ("[media] vb2: Move buffer cache synchronisation to prepare from queue")
Cc: stable@vger.kernel.org # for v4.13 and up
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: hwpoison: disable memory error handling on 1GB hugepage

commit 31286a8484a85e8b4e91ddb0f5415aee8a416827 upstream.

Recently the following BUG was reported:

    Injecting memory failure for pfn 0x3c0000 at process virtual address 0x7fe300000000
    Memory failure: 0x3c0000: recovery action for huge page: Recovered
    BUG: unable to handle kernel paging request at ffff8dfcc0003000
    IP: gup_pgd_range+0x1f0/0xc20
    PGD 17ae72067 P4D 17ae72067 PUD 0
    Oops: 0000 [#1] SMP PTI
    ...
    CPU: 3 PID: 5467 Comm: hugetlb_1gb Not tainted 4.15.0-rc8-mm1-abc+ #3
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-1.fc25 04/01/2014

You can easily reproduce this by calling madvise(MADV_HWPOISON) twice on
a 1GB hugepage.  This happens because get_user_pages_fast() is not aware
of a migration entry on pud that was created in the 1st madvise() event.

I think that conversion to pud-aligned migration entry is working, but
other MM code walking over page table isn't prepared for it.  We need
some time and effort to make all this work properly, so this patch
avoids the reported bug by just disabling error handling for 1GB
hugepage.

[n-horiguchi@ah.jp.nec.com: v2]
Link: http://lkml.kernel.org/r/1517284444-18149-1-git-send-email-n-horiguchi@ah.jp.nec.com
Link: http://lkml.kernel.org/r/1517207283-15769-1-git-send-email-n-horiguchi@ah.jp.nec.com
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Punit Agrawal <punit.agrawal@arm.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irq/core: Fix boot crash when the irqaffinity= boot parameter is passed on CPUMASK_OFFSTACK=y kernels(v1)

commit 10d94ff4d558b96bfc4f55bb0051ae4d938246fe upstream.

When the irqaffinity= kernel parameter is passed in a CPUMASK_OFFSTACK=y
kernel, it fails to boot, because zalloc_cpumask_var() cannot be used before
initializing the slab allocator to allocate a cpumask.

So, use alloc_bootmem_cpumask_var() instead.

Also do some cleanups while at it: in init_irq_default_affinity() remove
an #ifdef via using cpumask_available().

Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171026045800.27087-1-rakib.mullick@gmail.com
Link: http://lkml.kernel.org/r/20171101041451.12581-1-rakib.mullick@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Janne Huttunen <janne.huttunen@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: debug: check length before copy_to_user()

commit 717adfdaf14704fd3ec7fa2c04520c0723247eac upstream.

If our length is greater than the size of the buffer, we
overflow the buffer

Cc: stable@vger.kernel.org
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: hiddev: fix potential Spectre v1

commit 4f65245f2d178b9cba48350620d76faa4a098841 upstream.

uref->field_index, uref->usage_index, finfo.field_index and cinfo.index can be
indirectly controlled by user-space, hence leading to a potential exploitation
of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/hid/usbhid/hiddev.c:473 hiddev_ioctl_usage() warn: potential spectre issue 'report->field' (local cap)
drivers/hid/usbhid/hiddev.c:477 hiddev_ioctl_usage() warn: potential spectre issue 'field->usage' (local cap)
drivers/hid/usbhid/hiddev.c:757 hiddev_ioctl() warn: potential spectre issue 'report->field' (local cap)
drivers/hid/usbhid/hiddev.c:801 hiddev_ioctl() warn: potential spectre issue 'hid->collection' (local cap)

Fix this by sanitizing such structure fields before using them to index
report->field, field->usage and hid->collection

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: i2c-hid: Fix "incomplete report" noise

commit ef6eaf27274c0351f7059163918f3795da13199c upstream.

Commit ac75a041048b ("HID: i2c-hid: fix size check and type usage") started
writing messages when the ret_size is <= 2 from i2c_master_recv.  However, my
device i2c-DLL07D1 returns 2 for a short period of time (~0.5s) after I stop
moving the pointing stick or touchpad.  It varies, but you get ~50 messages
each time which spams the log hard.

[  95.925055] i2c_hid i2c-DLL07D1:01: i2c_hid_get_input: incomplete report (83/2)

This has also been observed with a i2c-ALP0017.

[ 1781.266353] i2c_hid i2c-ALP0017:00: i2c_hid_get_input: incomplete report (30/2)

Only print the message when ret_size is totally invalid and less than 2 to cut
down on the log spam.

Fixes: ac75a041048b ("HID: i2c-hid: fix size check and type usage")
Reported-by: John Smith <john-s-84@gmx.net>
Cc: stable@vger.kernel.org
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: cope with WRITE ZEROES failing in blkdev_issue_zeroout()

commit d5ce4c31d6df518dd8f63bbae20d7423c5018a6c upstream.

sd_config_write_same() ignores ->max_ws_blocks == 0 and resets it to
permit trying WRITE SAME on older SCSI devices, unless ->no_write_same
is set.  Because REQ_OP_WRITE_ZEROES is implemented in terms of WRITE
SAME, blkdev_issue_zeroout() may fail with -EREMOTEIO:

  $ fallocate -zn -l 1k /dev/sdg
  fallocate: fallocate failed: Remote I/O error
  $ fallocate -zn -l 1k /dev/sdg  # OK
  $ fallocate -zn -l 1k /dev/sdg  # OK

The following calls succeed because sd_done() sets ->no_write_same in
response to a sense that would become BLK_STS_TARGET/-EREMOTEIO, causing
__blkdev_issue_zeroout() to fall back to generating ZERO_PAGE bios.

This means blkdev_issue_zeroout() must cope with WRITE ZEROES failing
and fall back to manually zeroing, unless BLKDEV_ZERO_NOFALLBACK is
specified.  For BLKDEV_ZERO_NOFALLBACK case, return -EOPNOTSUPP if
sd_done() has just set ->no_write_same thus indicating lack of offload
support.

Fixes: c20cfc27a473 ("block: stop using blkdev_issue_write_same for zeroing")
Cc: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Janne Huttunen <janne.huttunen@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: factor out __blkdev_issue_zero_pages()

commit 425a4dba7953e35ffd096771973add6d2f40d2ed upstream.

blkdev_issue_zeroout() will use this in !BLKDEV_ZERO_NOFALLBACK case.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Janne Huttunen <janne.huttunen@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: check superblock mapped prior to committing

commit a17712c8e4be4fa5404d20e9cd3b2b21eae7bc56 upstream.

This patch attempts to close a hole leading to a BUG seen with hot
removals during writes [1].

A block device (NVME namespace in this test case) is formatted to EXT4
without partitions. It's mounted and write I/O is run to a file, then
the device is hot removed from the slot. The superblock attempts to be
written to the drive which is no longer present.

The typical chain of events leading to the BUG:
ext4_commit_super()
  __sync_dirty_buffer()
    submit_bh()
      submit_bh_wbc()
        BUG_ON(!buffer_mapped(bh));

This fix checks for the superblock's buffer head being mapped prior to
syncing.

[1] https://www.spinics.net/lists/linux-ext4/msg56527.html

Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: add more mount time checks of the superblock

commit bfe0a5f47ada40d7984de67e59a7d3390b9b9ecc upstream.

The kernel's ext4 mount-time checks were more permissive than
e2fsprogs's libext2fs checks when opening a file system. The
superblock is considered too insane for debugfs or e2fsck to operate
on it, the kernel has no business trying to mount it.

This will make file system fuzzing tools work harder, but the failure
cases that they find will be more useful and be easier to evaluate.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: add more inode number paranoia checks

commit c37e9e013469521d9adb932d17a1795c139b36db upstream.

If there is a directory entry pointing to a system inode (such as a
journal inode), complain and declare the file system to be corrupted.

Also, if the superblock's first inode number field is too small,
refuse to mount the file system.

This addresses CVE-2018-10882.

https://bugzilla.kernel.org/show_bug.cgi?id=200069

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: avoid running out of journal credits when appending to an inline file

commit 8bc1379b82b8e809eef77a9fedbb75c6c297be19 upstream.

Use a separate journal transaction if it turns out that we need to
convert an inline file to use an data block. Otherwise we could end
up failing due to not having journal credits.

This addresses CVE-2018-10883.

https://bugzilla.kernel.org/show_bug.cgi?id=200071

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: never move the system.data xattr out of the inode body

commit 8cdb5240ec5928b20490a2bb34cb87e9a5f40226 upstream.

When expanding the extra isize space, we must never move the
system.data xattr out of the inode body. For performance reasons, it
doesn't make any sense, and the inline data implementation assumes
that system.data xattr is never in the external xattr block.

This addresses CVE-2018-10880

https://bugzilla.kernel.org/show_bug.cgi?id=200005

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: clear i_data in ext4_inode_info when removing inline data

commit 6e8ab72a812396996035a37e5ca4b3b99b5d214b upstream.

When converting from an inode from storing the data in-line to a data
block, ext4_destroy_inline_data_nolock() was only clearing the on-disk
copy of the i_blocks[] array. It was not clearing copy of the
i_blocks[] in ext4_inode_info, in i_data[], which is the copy actually
used by ext4_map_blocks().

This didn't matter much if we are using extents, since the extents
header would be invalid and thus the extents could would re-initialize
the extents tree. But if we are using indirect blocks, the previous
contents of the i_blocks array will be treated as block numbers, with
potentially catastrophic results to the file system integrity and/or
user data.

This gets worse if the file system is using a 1k block size and
s_first_data is zero, but even without this, the file system can get
quite badly corrupted.

This addresses CVE-2018-10881.

https://bugzilla.kernel.org/show_bug.cgi?id=200015

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: include the illegal physical block in the bad map ext4_error msg

commit bdbd6ce01a70f02e9373a584d0ae9538dcf0a121 upstream.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: verify the depth of extent tree in ext4_find_extent()

commit bc890a60247171294acc0bd67d211fa4b88d40ba upstream.

If there is a corupted file system where the claimed depth of the
extent tree is -1, this can cause a massive buffer overrun leading to
sadness.

This addresses CVE-2018-10877.

https://bugzilla.kernel.org/show_bug.cgi?id=199417

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: only look at the bg_flags field if it is valid

commit 8844618d8aa7a9973e7b527d038a2a589665002c upstream.

The bg_flags field in the block group descripts is only valid if the
uninit_bg or metadata_csum feature is enabled. We were not
consistently looking at this field; fix this.

Also block group #0 must never have uninitialized allocation bitmaps,
or need to be zeroed, since that's where the root inode, and other
special inodes are set up. Check for these conditions and mark the
file system as corrupted if they are detected.

This addresses CVE-2018-10876.

https://bugzilla.kernel.org/show_bug.cgi?id=199403

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: always check block group bounds in ext4_init_block_bitmap()

commit 819b23f1c501b17b9694325471789e6b5cc2d0d2 upstream.

Regardless of whether the flex_bg feature is set, we should always
check to make sure the bits we are setting in the block bitmap are
within the block group bounds.

https://bugzilla.kernel.org/show_bug.cgi?id=199865

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: make sure bitmaps and the inode table don't overlap with bg descriptors

commit 77260807d1170a8cf35dbb06e07461a655f67eee upstream.

It's really bad when the allocation bitmaps and the inode table
overlap with the block group descriptors, since it causes random
corruption of the bg descriptors. So we really want to head those off
at the pass.

https://bugzilla.kernel.org/show_bug.cgi?id=199865

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: always verify the magic number in xattr blocks

commit 513f86d73855ce556ea9522b6bfd79f87356dc3a upstream.

If there an inode points to a block which is also some other type of
metadata block (such as a block allocation bitmap), the
buffer_verified flag can be set when it was validated as that other
metadata block type; however, it would make a really terrible external
attribute block. The reason why we use the verified flag is to avoid
constantly reverifying the block. However, it doesn't take much
overhead to make sure the magic number of the xattr block is correct,
and this will avoid potential crashes.

This addresses CVE-2018-10879.

https://bugzilla.kernel.org/show_bug.cgi?id=200001

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: add corruption check in ext4_xattr_set_entry()

commit 5369a762c882c0b6e9599e4ebbb3a9ba9eee7e2d upstream.

In theory this should have been caught earlier when the xattr list was
verified, but in case it got missed, it's simple enough to add check
to make sure we don't overrun the xattr buffer.

This addresses CVE-2018-10879.

https://bugzilla.kernel.org/show_bug.cgi?id=200001

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: don't mark block as modified if the handle is out of credits

commit e09463f220ca9a1a1ecfda84fcda658f99a1f12a upstream.

Do not set the b_modified flag in block's journal head should not
until after we're sure that jbd2_journal_dirty_metadat() will not
abort with an error due to there not being enough space reserved in
the jbd2 handle.

Otherwise, future attempts to modify the buffer may lead a large
number of spurious errors and warnings.

This addresses CVE-2018-10883.

https://bugzilla.kernel.org/show_bug.cgi?id=200071

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/udl: fix display corruption of the last line

commit 99ec9e77511dea55d81729fc80b6c63a61bfa8e0 upstream.

The displaylink hardware has such a peculiarity that it doesn't render a
command until next command is received. This produces occasional
corruption, such as when setting 22x11 font on the console, only the first
line of the cursor will be blinking if the cursor is located at some
specific columns.

When we end up with a repeating pixel, the driver has a bug that it leaves
one uninitialized byte after the command (and this byte is enough to flush
the command and render it - thus it fixes the screen corruption), however
whe we end up with a non-repeating pixel, there is no byte appended and
this results in temporary screen corruption.

This patch fixes the screen corruption by always appending a byte 0xAF at
the end of URB. It also removes the uninitialized byte.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: Use kvzalloc for allocating blob property memory

commit 718b5406cd76f1aa6434311241b7febf0e8571ff upstream.

The property size may be controlled by userspace, can be large (I've
seen failure with order 4, i.e. 16 pages / 64 KB) and doesn't need to be
physically contiguous.

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180629142710.2069-1-michel@daenzer.net
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix slab-out-of-bounds in send_set_info() on SMB2 ACE setting

commit f46ecbd97f508e68a7806291a139499794874f3d upstream.

A "small" CIFS buffer is not big enough in general to hold a
setacl request for SMB2, and we end up overflowing the buffer in
send_set_info(). For instance:

# mount.cifs //127.0.0.1/test /mnt/test -o username=test,password=test,nounix,cifsacl
# touch /mnt/test/acltest
# getcifsacl /mnt/test/acltest
REVISION:0x1
CONTROL:0x9004
OWNER:S-1-5-21-2926364953-924364008-418108241-1000
GROUP:S-1-22-2-1001
ACL:S-1-5-21-2926364953-924364008-418108241-1000:ALLOWED/0x0/0x1e01ff
ACL:S-1-22-2-1001:ALLOWED/0x0/R
ACL:S-1-22-2-1001:ALLOWED/0x0/R
ACL:S-1-5-21-2926364953-924364008-418108241-1000:ALLOWED/0x0/0x1e01ff
ACL:S-1-1-0:ALLOWED/0x0/R
# setcifsacl -a "ACL:S-1-22-2-1004:ALLOWED/0x0/R" /mnt/test/acltest

this setacl will cause the following KASAN splat:

[  330.777927] BUG: KASAN: slab-out-of-bounds in send_set_info+0x4dd/0xc20 [cifs]
[  330.779696] Write of size 696 at addr ffff88010d5e2860 by task setcifsacl/1012

[  330.781882] CPU: 1 PID: 1012 Comm: setcifsacl Not tainted 4.18.0-rc2+ #2
[  330.783140] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[  330.784395] Call Trace:
[  330.784789]  dump_stack+0xc2/0x16b
[  330.786777]  print_address_description+0x6a/0x270
[  330.787520]  kasan_report+0x258/0x380
[  330.788845]  memcpy+0x34/0x50
[  330.789369]  send_set_info+0x4dd/0xc20 [cifs]
[  330.799511]  SMB2_set_acl+0x76/0xa0 [cifs]
[  330.801395]  set_smb2_acl+0x7ac/0xf30 [cifs]
[  330.830888]  cifs_xattr_set+0x963/0xe40 [cifs]
[  330.840367]  __vfs_setxattr+0x84/0xb0
[  330.842060]  __vfs_setxattr_noperm+0xe6/0x370
[  330.843848]  vfs_setxattr+0xc2/0xd0
[  330.845519]  setxattr+0x258/0x320
[  330.859211]  path_setxattr+0x15b/0x1b0
[  330.864392]  __x64_sys_setxattr+0xc0/0x160
[  330.866133]  do_syscall_64+0x14e/0x4b0
[  330.876631]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  330.878503] RIP: 0033:0x7ff2e507db0a
[  330.880151] Code: 48 8b 0d 89 93 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 bc 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 56 93 2c 00 f7 d8 64 89 01 48
[  330.885358] RSP: 002b:00007ffdc4903c18 EFLAGS: 00000246 ORIG_RAX: 00000000000000bc
[  330.887733] RAX: ffffffffffffffda RBX: 000055d1170de140 RCX: 00007ff2e507db0a
[  330.890067] RDX: 000055d1170de7d0 RSI: 000055d115b39184 RDI: 00007ffdc4904818
[  330.892410] RBP: 0000000000000001 R08: 0000000000000000 R09: 000055d1170de7e4
[  330.894785] R10: 00000000000002b8 R11: 0000000000000246 R12: 0000000000000007
[  330.897148] R13: 000055d1170de0c0 R14: 0000000000000008 R15: 000055d1170de550

[  330.901057] Allocated by task 1012:
[  330.902888]  kasan_kmalloc+0xa0/0xd0
[  330.904714]  kmem_cache_alloc+0xc8/0x1d0
[  330.906615]  mempool_alloc+0x11e/0x380
[  330.908496]  cifs_small_buf_get+0x35/0x60 [cifs]
[  330.910510]  smb2_plain_req_init+0x4a/0xd60 [cifs]
[  330.912551]  send_set_info+0x198/0xc20 [cifs]
[  330.914535]  SMB2_set_acl+0x76/0xa0 [cifs]
[  330.916465]  set_smb2_acl+0x7ac/0xf30 [cifs]
[  330.918453]  cifs_xattr_set+0x963/0xe40 [cifs]
[  330.920426]  __vfs_setxattr+0x84/0xb0
[  330.922284]  __vfs_setxattr_noperm+0xe6/0x370
[  330.924213]  vfs_setxattr+0xc2/0xd0
[  330.926008]  setxattr+0x258/0x320
[  330.927762]  path_setxattr+0x15b/0x1b0
[  330.929592]  __x64_sys_setxattr+0xc0/0x160
[  330.931459]  do_syscall_64+0x14e/0x4b0
[  330.933314]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

[  330.936843] Freed by task 0:
[  330.938588] (stack is not available)

[  330.941886] The buggy address belongs to the object at ffff88010d5e2800
which belongs to the cache cifs_small_rq of size 448
[  330.946362] The buggy address is located 96 bytes inside of
448-byte region [ffff88010d5e2800, ffff88010d5e29c0)
[  330.950722] The buggy address belongs to the page:
[  330.952789] page:ffffea0004357880 count:1 mapcount:0 mapping:ffff880108fdca80 index:0x0 compound_mapcount: 0
[  330.955665] flags: 0x17ffffc0008100(slab|head)
[  330.957760] raw: 0017ffffc0008100 dead000000000100 dead000000000200 ffff880108fdca80
[  330.960356] raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
[  330.963005] page dumped because: kasan: bad access detected

[  330.967039] Memory state around the buggy address:
[  330.969255]  ffff88010d5e2880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  330.971833]  ffff88010d5e2900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  330.974397] >ffff88010d5e2980: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
[  330.976956]                                            ^
[  330.979226]  ffff88010d5e2a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  330.981755]  ffff88010d5e2a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  330.984225] ==================================================================

Fix this by allocating a regular CIFS buffer in
smb2_plain_req_init() if the request command is SMB2_SET_INFO.

Reported-by: Jianhong Yin <jiyin@redhat.com>
Fixes: 366ed846df60 ("cifs: Use smb 2 - 3 and cifsacl mount options setacl function")
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-and-tested-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix infinite loop when using hard mount option

commit 7ffbe65578b44fafdef577a360eb0583929f7c6e upstream.

For every request we send, whether it is SMB1 or SMB2+, we attempt to
reconnect tcon (cifs_reconnect_tcon or smb2_reconnect) before carrying
out the request.

So, while server->tcpStatus != CifsNeedReconnect, we wait for the
reconnection to succeed on wait_event_interruptible_timeout(). If it
returns, that means that either the condition was evaluated to true, or
timeout elapsed, or it was interrupted by a signal.

Since we're not handling the case where the process woke up due to a
received signal (-ERESTARTSYS), the next call to
wait_event_interruptible_timeout() will _always_ fail and we end up
looping forever inside either cifs_reconnect_tcon() or smb2_reconnect().

Here's an example of how to trigger that:

$ mount.cifs //foo/share /mnt/test -o
username=foo,password=foo,vers=1.0,hard

(break connection to server before executing bellow cmd)
$ stat -f /mnt/test & sleep 140
[1] 2511

$ ps -aux -q 2511
USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root      2511  0.0  0.0  12892  1008 pts/0    S    12:24   0:00 stat -f
/mnt/test

$ kill -9 2511

(wait for a while; process is stuck in the kernel)
$ ps -aux -q 2511
USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root      2511 83.2  0.0  12892  1008 pts/0    R    12:24  30:01 stat -f
/mnt/test

By using 'hard' mount point means that cifs.ko will keep retrying
indefinitely, however we must allow the process to be killed otherwise
it would hang the system.

Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Cc: stable@vger.kernel.org
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix memory leak in smb2_set_ea()

commit 6aa0c114eceec8cc61715f74a4ce91b048d7561c upstream.

This patch fixes a memory leak when doing a setxattr(2) in SMB2+.

Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix use after free of a mid_q_entry

commit 696e420bb2a6624478105651d5368d45b502b324 upstream.

With protocol version 2.0 mounts we have seen crashes with corrupt mid
entries. Either the server->pending_mid_q list becomes corrupt with a
cyclic reference in one element or a mid object fetched by the
demultiplexer thread becomes overwritten during use.

Code review identified a race between the demultiplexer thread and the
request issuing thread. The demultiplexer thread seems to be written
with the assumption that it is the sole user of the mid object until
it calls the mid callback which either wakes the issuer task or
deletes the mid.

This assumption is not true because the issuer task can be woken up
earlier by a signal. If the demultiplexer thread has proceeded as far
as setting the mid_state to MID_RESPONSE_RECEIVED then the issuer
thread will happily end up calling cifs_delete_mid while the
demultiplexer thread still is using the mid object.

Inserting a delay in the cifs demultiplexer thread widens the race
window and makes reproduction of the race very easy:

if (server->large_buf)
buf = server->bigbuf;

+ usleep_range(500, 4000);

server->lstrp = jiffies;

To resolve this I think the proper solution involves putting a
reference count on the mid object. This patch makes sure that the
demultiplexer thread holds a reference until it has finished
processing the transaction.

Cc: stable@vger.kernel.org
Signed-off-by: Lars Persson <larper@axis.com>
Acked-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vfio: Use get_user_pages_longterm correctly

commit bb94b55af3461e26b32f0e23d455abeae0cfca5d upstream.

The patch noted in the fixes below converted get_user_pages_fast() to
get_user_pages_longterm(), however the two calls differ in a few ways.

First _fast() is documented to not require the mmap_sem, while _longterm()
is documented to need it. Hold the mmap sem as required.

Second, _fast accepts an 'int write' while _longterm uses 'unsigned int
gup_flags', so the expression '!!(prot & IOMMU_WRITE)' is only working by
luck as FOLL_WRITE is currently == 0x1. Use the expected FOLL_WRITE
constant instead.

Fixes: 94db151dc892 ("vfio: disable filesystem-dax page pinning")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drbd: fix access after free

commit 64dafbc9530c10300acffc57fae3269d95fa8f93 upstream.

We have
  struct drbd_requests { ... struct bio *private_bio;  ... }
to hold a bio clone for local submission.

On local IO completion, we put that bio, and in case we want to use the
result later, we overload that member to hold the ERR_PTR() of the
completion result,

Which, before v4.3, used to be the passed in "int error",
so we could first bio_put(), then assign.

v4.3-rc1~100^2~21 4246a0b63bd8 block: add a bi_error field to struct bio
changed that:
   bio_put(req->private_bio);
- req->private_bio = ERR_PTR(error);
+ req->private_bio = ERR_PTR(bio->bi_error);

Which introduces an access after free,
because it was non obvious that req->private_bio == bio.

Impact of that was mostly unnoticable, because we only use that value
in a multiple-failure case, and even then map any "unexpected" error
code to EIO, so worst case we could potentially mask a more specific
error with EIO in a multiple failure case.

Unless the pointed to memory region was unmapped, as is the case with
CONFIG_DEBUG_PAGEALLOC, in which case this results in

  BUG: unable to handle kernel paging request

v4.13-rc1~70^2~75 4e4cbee93d56 block: switch bios to blk_status_t
changes it further to
   bio_put(req->private_bio);
   req->private_bio = ERR_PTR(blk_status_to_errno(bio->bi_status));

And blk_status_to_errno() now contains a WARN_ON_ONCE() for unexpected
values, which catches this "sometimes", if the memory has been reused
quickly enough for other things.

Should also go into stable since 4.3, with the trivial change around 4.13.

Cc: stable@vger.kernel.org
Fixes: 4246a0b63bd8 block: add a bi_error field to struct bio
Reported-by: Sarah Newman <srn@prgmr.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390: Correct register corruption in critical section cleanup

commit 891f6a726cacbb87e5b06076693ffab53bd378d7 upstream.

In the critical section cleanup we must not mess with r1. For march=z9
or older, larl + ex (instead of exrl) are used with r1 as a temporary
register. This can clobber r1 in several interrupt handlers. Fix this by
using r11 as a temp register. r11 is being saved by all callers of
cleanup_critical.

Fixes: 6dd85fbb87 ("s390: move expoline assembler macros to a header")
Cc: stable@vger.kernel.org #v4.16
Reported-by: Oliver Kurz <okurz@suse.com>
Reported-by: Petr Tesařík <ptesarik@suse.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: target: Fix truncated PR-in ReadKeys response

commit 63ce3c384db26494615e3c8972bcd419ed71f4c4 upstream.

SPC5r17 states that the contents of the ADDITIONAL LENGTH field are not
altered based on the allocation length, so always calculate and pack the
full key list length even if the list itself is truncated.

According to Maged:

  Yes it fixes the "Storage Spaces Persistent Reservation" test in the
  Windows 2016 Server Failover Cluster validation suites when having
  many connections that result in more than 8 registrations. I tested
  your patch on 4.17 with iblock.

This behaviour can be tested using the libiscsi PrinReadKeys.Truncate test.

Cc: stable@vger.kernel.org
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Tested-by: Maged Mokhtar <mmokhtar@petasan.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: sg: mitigate read/write abuse

commit 26b5b874aff5659a7e26e5b1997e3df2c41fa7fd upstream.

As Al Viro noted in commit 128394eff343 ("sg_write()/bsg_write() is not fit
to be called under KERNEL_DS"), sg improperly accesses userspace memory
outside the provided buffer, permitting kernel memory corruption via
splice(). But it doesn't just do it on ->write(), also on ->read().

As a band-aid, make sure that the ->read() and ->write() handlers can not
be called in weird contexts (kernel context or credentials different from
file opener), like for ib_safe_file_access().

If someone needs to use these interfaces from different security contexts,
a new interface should be written that goes through the ->ioctl() handler.

I've mostly copypasted ib_safe_file_access() over as sg_safe_file_access()
because I couldn't find a good common header - please tell me if you know a
better way.

[mkp: s/_safe_/_check_/]

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix missing return symbol in function_graph output

commit 1fe4293f4b8de75824935f8d8e9a99c7fc6873da upstream.

The function_graph tracer does not show the interrupt return marker for the
leaf entry. On leaf entries, we see an unbalanced interrupt marker (the
interrupt was entered, but nevern left).

Before:
1)               |  SyS_write() {
1)               |    __fdget_pos() {
1)   0.061 us    |      __fget_light();
1)   0.289 us    |    }
1)               |    vfs_write() {
1)   0.049 us    |      rw_verify_area();
1) + 15.424 us   |      __vfs_write();
1)   ==========> |
1)   6.003 us    |      smp_apic_timer_interrupt();
1)   0.055 us    |      __fsnotify_parent();
1)   0.073 us    |      fsnotify();
1) + 23.665 us   |    }
1) + 24.501 us   |  }

After:
0)               |  SyS_write() {
0)               |    __fdget_pos() {
0)   0.052 us    |      __fget_light();
0)   0.328 us    |    }
0)               |    vfs_write() {
0)   0.057 us    |      rw_verify_area();
0)               |      __vfs_write() {
0)   ==========> |
0)   8.548 us    |      smp_apic_timer_interrupt();
0)   <========== |
0) + 36.507 us   |      } /* __vfs_write */
0)   0.049 us    |      __fsnotify_parent();
0)   0.066 us    |      fsnotify();
0) + 50.064 us   |    }
0) + 50.952 us   |  }

Link: http://lkml.kernel.org/r/1517413729-20411-1-git-send-email-changbin.du@intel.com
Cc: stable@vger.kernel.org
Fixes: f8b755ac8e0cc ("tracing/function-graph-tracer: Output arrows signal on hardirq call/return")
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: hugetlb: yield when prepping struct pages

commit 520495fe96d74e05db585fc748351e0504d8f40d upstream.

When booting with very large numbers of gigantic (i.e. 1G) pages, the
operations in the loop of gather_bootmem_prealloc, and specifically
prep_compound_gigantic_page, takes a very long time, and can cause a
softlockup if enough pages are requested at boot.

For example booting with 3844 1G pages requires prepping
(set_compound_head, init the count) over 1 billion 4K tail pages, which
takes considerable time.

Add a cond_resched() to the outer loop in gather_bootmem_prealloc() to
prevent this lockup.

Tested: Booted with softlockup_panic=1 hugepagesz=1G hugepages=3844 and
no softlockup is reported, and the hugepages are reported as
successfully setup.

Link: http://lkml.kernel.org/r/20180627214447.260804-1-cannonmatthews@google.com
Signed-off-by: Cannon Matthews <cannonmatthews@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

userfaultfd: hugetlbfs: fix userfaultfd_huge_must_wait() pte access

commit 1e2c043628c7736dd56536d16c0ce009bc834ae7 upstream.

Use huge_ptep_get() to translate huge ptes to normal ptes so we can
check them with the huge_pte_* functions. Otherwise some architectures
will check the wrong values and will not wait for userspace to bring in
the memory.

Link: http://lkml.kernel.org/r/20180626132421.78084-1-frankja@linux.ibm.com
Fixes: 369cd2121be4 ("userfaultfd: hugetlbfs: userfaultfd_huge_must_wait for hugepmd ranges")
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.54

net: dsa: b53: Add BCM5389 support

[ Upstream commit a95691bc54af1ac4b12c354f91e9cabf1cb068df ]

This patch adds support for the BCM5389 switch connected through MDIO.

Signed-off-by: Damien Thébault <damien.thebault@vitec.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sonic: Use dma_mapping_error()

[ Upstream commit 26de0b76d9ba3200f09c6cb9d9618bda338be5f7 ]

With CONFIG_DMA_API_DEBUG=y, calling sonic_open() produces the
message, "DMA-API: device driver failed to check map error".
Add the missing dma_mapping_error() call.

Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: asus-wmi: Fix NULL pointer dereference

[ Upstream commit 32ffd6e8d1f6cef94bedca15dfcdebdeb590499d ]

Do not perform the rfkill cleanup routine when
(asus->driver->wlan_ctrl_by_user && ashs_present()) is true, since
nothing is registered with the rfkill subsystem in that case. Doing so
leads to the following kernel NULL pointer dereference:

  BUG: unable to handle kernel NULL pointer dereference at           (null)
  IP: [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120
  PGD 1a3aa8067
  PUD 1a3b3d067
  PMD 0

  Oops: 0002 [#1] PREEMPT SMP
  Modules linked in: bnep ccm binfmt_misc uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core hid_a4tech videodev x86_pkg_temp_thermal intel_powerclamp coretemp ath3k btusb btrtl btintel bluetooth kvm_intel snd_hda_codec_hdmi kvm snd_hda_codec_realtek snd_hda_codec_generic irqbypass crc32c_intel arc4 i915 snd_hda_intel snd_hda_codec ath9k ath9k_common ath9k_hw ath i2c_algo_bit snd_hwdep mac80211 ghash_clmulni_intel snd_hda_core snd_pcm snd_timer cfg80211 ehci_pci xhci_pci drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm xhci_hcd ehci_hcd asus_nb_wmi(-) asus_wmi sparse_keymap r8169 rfkill mxm_wmi serio_raw snd mii mei_me lpc_ich i2c_i801 video soundcore mei i2c_smbus wmi i2c_core mfd_core
  CPU: 3 PID: 3275 Comm: modprobe Not tainted 4.9.34-gentoo #34
  Hardware name: ASUSTeK COMPUTER INC. K56CM/K56CM, BIOS K56CM.206 08/21/2012
  task: ffff8801a639ba00 task.stack: ffffc900014cc000
  RIP: 0010:[<ffffffff816c7348>]  [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120
  RSP: 0018:ffffc900014cfce0  EFLAGS: 00010282
  RAX: 0000000000000000 RBX: ffff8801a54315b0 RCX: 00000000c0000100
  RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8801a54315b4
  RBP: ffffc900014cfd30 R08: 0000000000000000 R09: 0000000000000002
  R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801a54315b4
  R13: ffff8801a639ba00 R14: 00000000ffffffff R15: ffff8801a54315b8
  FS:  00007faa254fb700(0000) GS:ffff8801aef80000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000000 CR3: 00000001a3b1b000 CR4: 00000000001406e0
  Stack:
   ffff8801a54315b8 0000000000000000 ffffffff814733ae ffffc900014cfd28
   ffffffff8146a28c ffff8801a54315b0 0000000000000000 ffff8801a54315b0
   ffff8801a66f3820 0000000000000000 ffffc900014cfd48 ffffffff816c73e7
  Call Trace:
   [<ffffffff814733ae>] ? acpi_ut_release_mutex+0x5d/0x61
   [<ffffffff8146a28c>] ? acpi_ns_get_node+0x49/0x52
   [<ffffffff816c73e7>] mutex_lock+0x17/0x30
   [<ffffffffa00a3bb4>] asus_rfkill_hotplug+0x24/0x1a0 [asus_wmi]
   [<ffffffffa00a4421>] asus_wmi_rfkill_exit+0x61/0x150 [asus_wmi]
   [<ffffffffa00a49f1>] asus_wmi_remove+0x61/0xb0 [asus_wmi]
   [<ffffffff814a5128>] platform_drv_remove+0x28/0x40
   [<ffffffff814a2901>] __device_release_driver+0xa1/0x160
   [<ffffffff814a29e3>] device_release_driver+0x23/0x30
   [<ffffffff814a1ffd>] bus_remove_device+0xfd/0x170
   [<ffffffff8149e5a9>] device_del+0x139/0x270
   [<ffffffff814a5028>] platform_device_del+0x28/0x90
   [<ffffffff814a50a2>] platform_device_unregister+0x12/0x30
   [<ffffffffa00a4209>] asus_wmi_unregister_driver+0x19/0x30 [asus_wmi]
   [<ffffffffa00da0ea>] asus_nb_wmi_exit+0x10/0xf26 [asus_nb_wmi]
   [<ffffffff8110c692>] SyS_delete_module+0x192/0x270
   [<ffffffff810022b2>] ? exit_to_usermode_loop+0x92/0xa0
   [<ffffffff816ca560>] entry_SYSCALL_64_fastpath+0x13/0x94
  Code: e8 5e 30 00 00 8b 03 83 f8 01 0f 84 93 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 41 be ff ff ff ff 4c 89 3c 24 48 89 44 24 08 <48> 89 20 4c 89 6c 24 10 eb 1d 4c 89 e7 49 c7 45 08 02 00 00 00
  RIP  [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120
   RSP <ffffc900014cfce0>
  CR2: 0000000000000000
  ---[ end trace 8d484233fa7cb512 ]---
  note: modprobe[3275] exited with preempt_count 2

https://bugzilla.kernel.org/show_bug.cgi?id=196467

Reported-by: red.f0xyz@gmail.com
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/core: Require cpu_active() in select_task_rq(), for user tasks

[ Upstream commit 7af443ee1697607541c6346c87385adab2214743 ]

select_task_rq() is used in a few paths to select the CPU upon which a
thread should be run - for example it is used by try_to_wake_up() & by
fork or exec balancing. As-is it allows use of any online CPU that is
present in the task's cpus_allowed mask.

This presents a problem because there is a period whilst CPUs are
brought online where a CPU is marked online, but is not yet fully
initialized - ie. the period where CPUHP_AP_ONLINE_IDLE <= state <
CPUHP_ONLINE. Usually we don't run any user tasks during this window,
but there are corner cases where this can happen. An example observed
is:

  - Some user task A, running on CPU X, forks to create task B.

  - sched_fork() calls __set_task_cpu() with cpu=X, setting task B's
    task_struct::cpu field to X.

  - CPU X is offlined.

  - Task A, currently somewhere between the __set_task_cpu() in
    copy_process() and the call to wake_up_new_task(), is migrated to
    CPU Y by migrate_tasks() when CPU X is offlined.

  - CPU X is onlined, but still in the CPUHP_AP_ONLINE_IDLE state. The
    scheduler is now active on CPU X, but there are no user tasks on
    the runqueue.

  - Task A runs on CPU Y & reaches wake_up_new_task(). This calls
    select_task_rq() with cpu=X, taken from task B's task_struct,
    and select_task_rq() allows CPU X to be returned.

  - Task A enqueues task B on CPU X's runqueue, via activate_task() &
    enqueue_task().

  - CPU X now has a user task on its runqueue before it has reached the
    CPUHP_ONLINE state.

In most cases, the user tasks that schedule on the newly onlined CPU
have no idea that anything went wrong, but one case observed to be
problematic is if the task goes on to invoke the sched_setaffinity
syscall. The newly onlined CPU reaches the CPUHP_AP_ONLINE_IDLE state
before the CPU that brought it online calls stop_machine_unpark(). This
means that for a portion of the window of time between
CPUHP_AP_ONLINE_IDLE & CPUHP_ONLINE the newly onlined CPU's struct
cpu_stopper has its enabled field set to false. If a user thread is
executed on the CPU during this window and it invokes sched_setaffinity
with a CPU mask that does not include the CPU it's running on, then when
__set_cpus_allowed_ptr() calls stop_one_cpu() intending to invoke
migration_cpu_stop() and perform the actual migration away from the CPU
it will simply return -ENOENT rather than calling migration_cpu_stop().
We then return from the sched_setaffinity syscall back to the user task
that is now running on a CPU which it just asked not to run on, and
which is not present in its cpus_allowed mask.

This patch resolves the problem by having select_task_rq() enforce that
user tasks run on CPUs that are active - the same requirement that
select_fallback_rq() already enforces. This should ensure that newly
onlined CPUs reach the CPUHP_AP_ACTIVE state before being able to
schedule user tasks, and also implies that bringup_wait_for_ap() will
have called stop_machine_unpark() which resolves the sched_setaffinity
issue above.

I haven't yet investigated them, but it may be of interest to review
whether any of the actions performed by hotplug states between
CPUHP_AP_ONLINE_IDLE & CPUHP_AP_ACTIVE could have similar unintended
effects on user tasks that might schedule before they are reached, which
might widen the scope of the problem from just affecting the behaviour
of sched_setaffinity.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180526154648.11635-2-paul.burton@mips.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/core: Fix rules for running on online && !active CPUs

[ Upstream commit 175f0e25abeaa2218d431141ce19cf1de70fa82d ]

As already enforced by the WARN() in __set_cpus_allowed_ptr(), the rules
for running on an online && !active CPU are stricter than just being a
kthread, you need to be a per-cpu kthread.

If you're not strictly per-CPU, you have better CPUs to run on and
don't need the partially booted one to get your work done.

The exception is to allow smpboot threads to bootstrap the CPU itself
and get kernel 'services' initialized before we allow userspace on it.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 955dbdf4ce87 ("sched: Allow migrating kthreads into online but inactive CPUs")
Link: http://lkml.kernel.org/r/20170725165821.cejhb7v2s3kecems@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: clear writeback errors in inode_init_always

[ Upstream commit 829bc787c1a0403e4d886296dd4d90c5f9c1744a ]

In inode_init_always(), we clear the inode mapping flags, which clears
any retained error (AS_EIO, AS_ENOSPC) bits. Unfortunately, we do not
also clear wb_err, which means that old mapping errors can leak through
to new inodes.

This is crucial for the XFS inode allocation path because we recycle old
in-core inodes and we do not want error state from an old file to leak
into the new file. This bug was discovered by running generic/036 and
generic/047 in a loop and noticing that the EIOs generated by the
collision of direct and buffered writes in generic/036 would survive the
remount between 036 and 047, and get reported to the fsyncs (on
different files!) in generic/047.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf bpf: Fix NULL return handling in bpf__prepare_load()

[ Upstream commit ab4e32ff5aa797eaea551dbb67946e2fcb56cc7e ]

bpf_object__open()/bpf_object__open_buffer can return error pointer or
NULL, check the return values with IS_ERR_OR_NULL() in bpf__prepare_load
and bpf__prepare_load_buffer

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: netdev@vger.kernel.org
Link: https://lkml.kernel.org/n/tip-psf4xwc09n62al2cb9s33v9h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf test: "Session topology" dumps core on s390

[ Upstream commit d121109100bda84bbbb199dab97f9d56432ab235 ]

The "perf test Session topology" entry fails with core dump on s390. The root
cause is a NULL pointer dereference in function check_cpu_topology() line 76
(or line 82 without -v).

The session->header.env.cpu variable is NULL because on s390 function
process_cpu_topology() returns with error:

    socket_id number is too big.
    You may need to upgrade the perf tool.

and releases the env.cpu variable via zfree() and sets it to NULL.

Here is the gdb output:
(gdb) n
76                      pr_debug("CPU %d, core %d, socket %d\n", i,
(gdb) n

Program received signal SIGSEGV, Segmentation fault.
0x00000000010f4d9e in check_cpu_topology (path=0x3ffffffd6c8
"/tmp/perf-test-J6CHMa", map=0x14a1740) at tests/topology.c:76
76  pr_debug("CPU %d, core %d, socket %d\n", i,
(gdb)

Make sure the env.cpu variable is not used when its NULL.
Test for NULL pointer and return TEST_SKIP if so.

Output before:

  [root@p23lp27 perf]# ./perf test -F 39
  39: Session topology  :Segmentation fault (core dumped)
  [root@p23lp27 perf]#

Output after:

  [root@p23lp27 perf]# ./perf test -vF 39
  39: Session topology                                      :
  --- start ---
  templ file: /tmp/perf-test-Ajx59D
  socket_id number is too big.You may need to upgrade the perf tool.
  ---- end ----
  Session topology: Skip
  [root@p23lp27 perf]#

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180528073657.11743-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: qmi_wwan: Add Netgear Aircard 779S

[ Upstream commit 2415f3bd059fe050eb98aedf93664d000ceb4e92 ]

Add support for Netgear Aircard 779S

Signed-off-by: Josh Hill <josh@joshuajhill.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

atm: zatm: fix memcmp casting

[ Upstream commit f9c6442a8f0b1dde9e755eb4ff6fa22bcce4eabc ]

memcmp() returns int, but eprom_try_esi() cast it to unsigned char. One
can lose significant bits and get 0 from non-0 value returned by the
memcmp().

Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: pcie: compare with number of IRQs requested for, not number of CPUs

[ Upstream commit ab1068d6866e28bf6427ceaea681a381e5870a4a ]

When there are 16 or more logical CPUs, we request for
`IWL_MAX_RX_HW_QUEUES` (16) IRQs only as we limit to that number of
IRQs, but later on we compare the number of IRQs returned to
nr_online_cpus+2 instead of max_irqs, the latter being what we
actually asked for. This ends up setting num_rx_queues to 17 which
causes lots of out-of-bounds array accesses later on.

Compare to max_irqs instead, and also add an assertion in case
num_rx_queues > IWM_MAX_RX_HW_QUEUES.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=199551

Fixes: 2e5d4a8f61dc ("iwlwifi: pcie: Add new configuration to enable MSIX")
Signed-off-by: Hao Wei Tee <angelsl@in04.sg>
Tested-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipvs: fix buffer overflow with sync daemon and service

[ Upstream commit 52f96757905bbf0edef47f3ee6c7c784e7f8ff8a ]

syzkaller reports for buffer overflow for interface name
when starting sync daemons [1]

What we do is that we copy user structure into larger stack
buffer but later we search NUL past the stack buffer.
The same happens for sched_name when adding/editing virtual server.

We are restricted by IP_VS_SCHEDNAME_MAXLEN and IP_VS_IFNAME_MAXLEN
being used as size in include/uapi/linux/ip_vs.h, so they
include the space for NUL.

As using strlcpy is wrong for unsafe source, replace it with
strscpy and add checks to return EINVAL if source string is not
NUL-terminated. The incomplete strlcpy fix comes from 2.6.13.

For the netlink interface reduce the len parameter for
IPVS_DAEMON_ATTR_MCAST_IFN and IPVS_SVC_ATTR_SCHED_NAME,
so that we get proper EINVAL.

[1]
kernel BUG at lib/string.c:1052!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
    (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 373 Comm: syz-executor936 Not tainted 4.17.0-rc4+ #45
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:fortify_panic+0x13/0x20 lib/string.c:1051
RSP: 0018:ffff8801c976f800 EFLAGS: 00010282
RAX: 0000000000000022 RBX: 0000000000000040 RCX: 0000000000000000
RDX: 0000000000000022 RSI: ffffffff8160f6f1 RDI: ffffed00392edef6
RBP: ffff8801c976f800 R08: ffff8801cf4c62c0 R09: ffffed003b5e4fb0
R10: ffffed003b5e4fb0 R11: ffff8801daf27d87 R12: ffff8801c976fa20
R13: ffff8801c976fae4 R14: ffff8801c976fae0 R15: 000000000000048b
FS:  00007fd99f75e700(0000) GS:ffff8801daf00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200001c0 CR3: 00000001d6843000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  strlen include/linux/string.h:270 [inline]
  strlcpy include/linux/string.h:293 [inline]
  do_ip_vs_set_ctl+0x31c/0x1d00 net/netfilter/ipvs/ip_vs_ctl.c:2388
  nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
  nf_setsockopt+0x7d/0xd0 net/netfilter/nf_sockopt.c:115
  ip_setsockopt+0xd8/0xf0 net/ipv4/ip_sockglue.c:1253
  udp_setsockopt+0x62/0xa0 net/ipv4/udp.c:2487
  ipv6_setsockopt+0x149/0x170 net/ipv6/ipv6_sockglue.c:917
  tcp_setsockopt+0x93/0xe0 net/ipv4/tcp.c:3057
  sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3046
  __sys_setsockopt+0x1bd/0x390 net/socket.c:1903
  __do_sys_setsockopt net/socket.c:1914 [inline]
  __se_sys_setsockopt net/socket.c:1911 [inline]
  __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911
  do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x447369
RSP: 002b:00007fd99f75dda8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 00000000006e39e4 RCX: 0000000000447369
RDX: 000000000000048b RSI: 0000000000000000 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000018 R09: 0000000000000000
R10: 00000000200001c0 R11: 0000000000000246 R12: 00000000006e39e0
R13: 75a1ff93f0896195 R14: 6f745f3168746576 R15: 0000000000000001
Code: 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b 48 89 df e8 d2 8f 48 fa eb
de 55 48 89 fe 48 c7 c7 60 65 64 88 48 89 e5 e8 91 dd f3 f9 <0f> 0b 90 90
90 90 90 90 90 90 90 90 90 55 48 89 e5 41 57 41 56
RIP: fortify_panic+0x13/0x20 lib/string.c:1051 RSP: ffff8801c976f800

Reported-and-tested-by: syzbot+aac887f77319868646df@syzkaller.appspotmail.com
Fixes: e4ff67513096 ("ipvs: add sync_maxlen parameter for the sync daemon")
Fixes: 4da62fc70d7c ("[IPVS]: Fix for overflows")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_limit: fix packet ratelimiting

[ Upstream commit 3e0f64b7dd3149f75e8652ff1df56cffeedc8fc1 ]

Credit calculations for the packet ratelimiting are not correct, as per
the applied ratelimit of 25/second and burst 8, a total of 33 packets
should have been accepted. This is true in iptables(33) but not in
nftables (~65). For packet ratelimiting, use:

div_u64(limit->nsecs, limit->rate) * limit->burst;

to calculate credit, just like in iptables' xt_limit does.

Moreover, use default burst in iptables, users are expecting similar
behaviour.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/dasd: use blk_mq_rq_from_pdu for per request data

[ Upstream commit f0f59a2fab8e52b9d582b39da39f22230ca80aee ]

Dasd uses completion_data from struct request to store per request
private data - this is problematic since this member is part of a
union which is also used by IO schedulers.
Let the block layer maintain space for per request data behind each
struct request.

Fixes crashes on block layer timeouts like this one:

Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 0000000000000000 TEID: 0000000000000483
Fault in home space mode while using kernel ASCE.
AS:0000000001308007 R3:00000000fffc8007 S:00000000fffcc000 P:000000000000013d
Oops: 0004 ilc:2 [#1] PREEMPT SMP
Modules linked in: [...]
CPU: 0 PID: 1480 Comm: kworker/0:2H Not tainted 4.17.0-rc4-00046-gaa3bcd43b5af #203
Hardware name: IBM 3906 M02 702 (LPAR)
Workqueue: kblockd blk_mq_timeout_work
Krnl PSW : 0000000067ac406b 00000000b6960308 (do_raw_spin_trylock+0x30/0x78)
           R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Krnl GPRS: 0000000000000c00 0000000000000000 0000000000000000 0000000000000001
           0000000000b9d3c8 0000000000000000 0000000000000001 00000000cf9639d8
           0000000000000000 0700000000000000 0000000000000000 000000000099f09e
           0000000000000000 000000000076e9d0 000000006247bb08 000000006247bae0
Krnl Code: 00000000001c159c: b90400c2           lgr     %r12,%r2
           00000000001c15a0: a7180000           lhi     %r1,0
          #00000000001c15a4: 583003a4           l       %r3,932
          >00000000001c15a8: ba132000           cs      %r1,%r3,0(%r2)
           00000000001c15ac: a7180001           lhi     %r1,1
           00000000001c15b0: a784000b           brc     8,1c15c6
           00000000001c15b4: c0e5004e72aa       brasl   %r14,b8fb08
           00000000001c15ba: 1812               lr      %r1,%r2
Call Trace:
([<0700000000000000>] 0x700000000000000)
[<0000000000b9d3d2>] _raw_spin_lock_irqsave+0x7a/0xb8
[<000000000099f09e>] dasd_times_out+0x46/0x278
[<000000000076ea6e>] blk_mq_terminate_expired+0x9e/0x108
[<000000000077497a>] bt_for_each+0x102/0x130
[<0000000000774e54>] blk_mq_queue_tag_busy_iter+0x74/0xd8
[<000000000076fea0>] blk_mq_timeout_work+0x260/0x320
[<0000000000169dd4>] process_one_work+0x3bc/0x708
[<000000000016a382>] worker_thread+0x262/0x408
[<00000000001723a8>] kthread+0x160/0x178
[<0000000000b9e73a>] kernel_thread_starter+0x6/0xc
[<0000000000b9e734>] kernel_thread_starter+0x0/0xc
INFO: lockdep is turned off.
Last Breaking-Event-Address:
[<0000000000b9d3cc>] _raw_spin_lock_irqsave+0x74/0xb8

Kernel panic - not syncing: Fatal exception: panic_on_oops

Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ebtables: handle string from userspace with care

[ Upstream commit 94c752f99954797da583a84c4907ff19e92550a4 ]

strlcpy() can't be safely used on a user-space provided string,
as it can try to read beyond the buffer's end, if the latter is
not NULL terminated.

Leveraging the above, syzbot has been able to trigger the following
splat:

BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300
[inline]
BUG: KASAN: stack-out-of-bounds in compat_mtw_from_user
net/bridge/netfilter/ebtables.c:1957 [inline]
BUG: KASAN: stack-out-of-bounds in ebt_size_mwt
net/bridge/netfilter/ebtables.c:2059 [inline]
BUG: KASAN: stack-out-of-bounds in size_entry_mwt
net/bridge/netfilter/ebtables.c:2155 [inline]
BUG: KASAN: stack-out-of-bounds in compat_copy_entries+0x96c/0x14a0
net/bridge/netfilter/ebtables.c:2194
Write of size 33 at addr ffff8801b0abf888 by task syz-executor0/4504

CPU: 0 PID: 4504 Comm: syz-executor0 Not tainted 4.17.0-rc2+ #40
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0x1b9/0x294 lib/dump_stack.c:113
  print_address_description+0x6c/0x20b mm/kasan/report.c:256
  kasan_report_error mm/kasan/report.c:354 [inline]
  kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
  check_memory_region_inline mm/kasan/kasan.c:260 [inline]
  check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
  memcpy+0x37/0x50 mm/kasan/kasan.c:303
  strlcpy include/linux/string.h:300 [inline]
  compat_mtw_from_user net/bridge/netfilter/ebtables.c:1957 [inline]
  ebt_size_mwt net/bridge/netfilter/ebtables.c:2059 [inline]
  size_entry_mwt net/bridge/netfilter/ebtables.c:2155 [inline]
  compat_copy_entries+0x96c/0x14a0 net/bridge/netfilter/ebtables.c:2194
  compat_do_replace+0x483/0x900 net/bridge/netfilter/ebtables.c:2285
  compat_do_ebt_set_ctl+0x2ac/0x324 net/bridge/netfilter/ebtables.c:2367
  compat_nf_sockopt net/netfilter/nf_sockopt.c:144 [inline]
  compat_nf_setsockopt+0x9b/0x140 net/netfilter/nf_sockopt.c:156
  compat_ip_setsockopt+0xff/0x140 net/ipv4/ip_sockglue.c:1279
  inet_csk_compat_setsockopt+0x97/0x120 net/ipv4/inet_connection_sock.c:1041
  compat_tcp_setsockopt+0x49/0x80 net/ipv4/tcp.c:2901
  compat_sock_common_setsockopt+0xb4/0x150 net/core/sock.c:3050
  __compat_sys_setsockopt+0x1ab/0x7c0 net/compat.c:403
  __do_compat_sys_setsockopt net/compat.c:416 [inline]
  __se_compat_sys_setsockopt net/compat.c:413 [inline]
  __ia32_compat_sys_setsockopt+0xbd/0x150 net/compat.c:413
  do_syscall_32_irqs_on arch/x86/entry/common.c:323 [inline]
  do_fast_syscall_32+0x345/0xf9b arch/x86/entry/common.c:394
  entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139
RIP: 0023:0xf7fb3cb9
RSP: 002b:00000000fff0c26c EFLAGS: 00000282 ORIG_RAX: 000000000000016e
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000000000
RDX: 0000000000000080 RSI: 0000000020000300 RDI: 00000000000005f4
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000

The buggy address belongs to the page:
page:ffffea0006c2afc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x2fffc0000000000()
raw: 02fffc0000000000 0000000000000000 0000000000000000 00000000ffffffff
raw: 0000000000000000 ffffea0006c20101 0000000000000000 0000000000000000
page dumped because: kasan: bad access detected

Fix the issue replacing the unsafe function with strscpy() and
taking care of possible errors.

Fixes: 81e675c227ec ("netfilter: ebtables: add CONFIG_COMPAT support")
Reported-and-tested-by: syzbot+4e42a04e0bc33cb6c087@syzkaller.appspotmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

afs: Fix directory permissions check

[ Upstream commit 378831e4daec75fbba6d3612bcf3b4dd00ddbf08 ]

Doing faccessat("/afs/some/directory", 0) triggers a BUG in the permissions
check code.

Fix this by just removing the BUG section.  If no permissions are asked
for, just return okay if the file exists.

Also:

(1) Split up the directory check so that it has separate if-statements
     rather than if-else-if (e.g. checking for MAY_EXEC shouldn't skip the
     check for MAY_READ and MAY_WRITE).

(2) Check for MAY_CHDIR as MAY_EXEC.

Without the main fix, the following BUG may occur:

kernel BUG at fs/afs/security.c:386!
invalid opcode: 0000 [#1] SMP PTI
...
RIP: 0010:afs_permission+0x19d/0x1a0 [kafs]
...
Call Trace:
  ? inode_permission+0xbe/0x180
  ? do_faccessat+0xdc/0x270
  ? do_syscall_64+0x60/0x1f0
  ? entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 00d3b7a4533e ("[AFS]: Add security support.")
Reported-by: Jonathan Billings <jsbillings@jsbillings.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm6: avoid potential infinite loop in _decode_session6()

[ Upstream commit d9f92772e8ec388d070752ee8f187ef8fa18621f ]

syzbot found a way to trigger an infinitie loop by overflowing
@offset variable that has been forced to use u16 for some very
obscure reason in the past.

We probably want to look at NEXTHDR_FRAGMENT handling which looks
wrong, in a separate patch.

In net-next, we shall try to use skb_header_pointer() instead of
pskb_may_pull().

watchdog: BUG: soft lockup - CPU#1 stuck for 134s! [syz-executor738:4553]
Modules linked in:
irq event stamp: 13885653
hardirqs last  enabled at (13885652): [<ffffffff878009d5>] restore_regs_and_return_to_kernel+0x0/0x2b
hardirqs last disabled at (13885653): [<ffffffff87800905>] interrupt_entry+0xb5/0xf0 arch/x86/entry/entry_64.S:625
softirqs last  enabled at (13614028): [<ffffffff84df0809>] tun_napi_alloc_frags drivers/net/tun.c:1478 [inline]
softirqs last  enabled at (13614028): [<ffffffff84df0809>] tun_get_user+0x1dd9/0x4290 drivers/net/tun.c:1825
softirqs last disabled at (13614032): [<ffffffff84df1b6f>] tun_get_user+0x313f/0x4290 drivers/net/tun.c:1942
CPU: 1 PID: 4553 Comm: syz-executor738 Not tainted 4.17.0-rc3+ #40
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:check_kcov_mode kernel/kcov.c:67 [inline]
RIP: 0010:__sanitizer_cov_trace_pc+0x20/0x50 kernel/kcov.c:101
RSP: 0018:ffff8801d8cfe250 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffff8801d88a8080 RBX: ffff8801d7389e40 RCX: 0000000000000006
RDX: 0000000000000000 RSI: ffffffff868da4ad RDI: ffff8801c8a53277
RBP: ffff8801d8cfe250 R08: ffff8801d88a8080 R09: ffff8801d8cfe3e8
R10: ffffed003b19fc87 R11: ffff8801d8cfe43f R12: ffff8801c8a5327f
R13: 0000000000000000 R14: ffff8801c8a4e5fe R15: ffff8801d8cfe3e8
FS:  0000000000d88940(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffff600400 CR3: 00000001acab3000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
_decode_session6+0xc1d/0x14f0 net/ipv6/xfrm6_policy.c:150
__xfrm_decode_session+0x71/0x140 net/xfrm/xfrm_policy.c:2368
xfrm_decode_session_reverse include/net/xfrm.h:1213 [inline]
icmpv6_route_lookup+0x395/0x6e0 net/ipv6/icmp.c:372
icmp6_send+0x1982/0x2da0 net/ipv6/icmp.c:551
icmpv6_send+0x17a/0x300 net/ipv6/ip6_icmp.c:43
ip6_input_finish+0x14e1/0x1a30 net/ipv6/ip6_input.c:305
NF_HOOK include/linux/netfilter.h:288 [inline]
ip6_input+0xe1/0x5e0 net/ipv6/ip6_input.c:327
dst_input include/net/dst.h:450 [inline]
ip6_rcv_finish+0x29c/0xa10 net/ipv6/ip6_input.c:71
NF_HOOK include/linux/netfilter.h:288 [inline]
ipv6_rcv+0xeb8/0x2040 net/ipv6/ip6_input.c:208
__netif_receive_skb_core+0x2468/0x3650 net/core/dev.c:4646
__netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4711
netif_receive_skb_internal+0x126/0x7b0 net/core/dev.c:4785
napi_frags_finish net/core/dev.c:5226 [inline]
napi_gro_frags+0x631/0xc40 net/core/dev.c:5299
tun_get_user+0x3168/0x4290 drivers/net/tun.c:1951
tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:1996
call_write_iter include/linux/fs.h:1784 [inline]
do_iter_readv_writev+0x859/0xa50 fs/read_write.c:680
do_iter_write+0x185/0x5f0 fs/read_write.c:959
vfs_writev+0x1c7/0x330 fs/read_write.c:1004
do_writev+0x112/0x2f0 fs/read_write.c:1039
__do_sys_writev fs/read_write.c:1112 [inline]
__se_sys_writev fs/read_write.c:1109 [inline]
__x64_sys_writev+0x75/0xb0 fs/read_write.c:1109
do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reported-by: syzbot+0053c8...@syzkaller.appspotmail.com
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: fix return value check for bad block status

commit e9893e6fa932f42c90c4ac5849fa9aa0f0f00a34 upstream.

Positive return value from read_oob() is making false BAD
blocks. For some of the NAND controllers, OOB bytes will be
protected with ECC and read_oob() will return number of bitflips.
If there is any bitflip in ECC protected OOB bytes for BAD block
status page, then that block is getting treated as BAD.

Fixes: c120e75e0e7d ("mtd: nand: use read_oob() instead of cmdfunc() for bad block check")
Cc: <stable@vger.kernel.org>
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
[backported to 4.14.y]
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx6q: Use correct SDMA script for SPI5 core

commit df07101e1c4a29e820df02f9989a066988b160e6 upstream.

According to the reference manual the shp_2_mcu / mcu_2_shp
scripts must be used for devices connected through the SPBA.

This fixes an issue we saw with DMA transfers.
Sometimes the SPI controller RX FIFO was not empty after a DMA
transfer and the driver got stuck in the next PIO transfer when
it read one word more than expected.

commit dd4b487b32a35 ("ARM: dts: imx6: Use correct SDMA script
for SPI cores") is fixing the same issue but only for SPI1 - 4.

Fixes: 677940258dd8e ("ARM: dts: imx6q: enable dma for ecspi5")
Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: use WARN_ON_ONCE instead of BUG_ON in nft_do_chain()

commit adc972c5b88829d38ede08b1069718661c7330ae upstream.

When depth of chain is bigger than NFT_JUMP_STACK_SIZE, the nft_do_chain
crashes. But there is no need to crash hard here.

Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ip6t_rpfilter: provide input interface for route lookup

commit cede24d1b21d68d84ac5a36c44f7d37daadcc258 upstream.

In commit 47b7e7f82802, this bit was removed at the same time the
RT6_LOOKUP_F_IFACE flag was removed. However, it is needed when
link-local addresses are used, which is a very common case: when
packets are routed, neighbor solicitations are done using link-local
addresses. For example, the following neighbor solicitation is not
matched by "-m rpfilter":

IP6 fe80::5254:33ff:fe00:1 > ff02::1:ff00:3: ICMP6, neighbor
solicitation, who has 2001:db8::5254:33ff:fe00:3, length 32

Commit 47b7e7f82802 doesn't quite explain why we shouldn't use
RT6_LOOKUP_F_IFACE in the rpfilter case. I suppose the interface check
later in the function would make it redundant. However, the remaining
of the routing code is using RT6_LOOKUP_F_IFACE when there is no
source address (which matches rpfilter's case with a non-unicast
destination, like with neighbor solicitation).

Signed-off-by: Vincent Bernat <vincent@bernat.im>
Fixes: 47b7e7f82802 ("netfilter: don't set F_IFACE on ipv6 fib lookups")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: don't set F_IFACE on ipv6 fib lookups

commit 47b7e7f82802dced3ac73658bf4b77584a63063f upstream.

"fib" starts to behave strangely when an ipv6 default route is
added - the FIB lookup returns a route using 'oif' in this case.

This behaviour was inherited from ip6tables rpfilter so change
this as well.

Bugzilla: https://bugzilla.netfilter.org/show_bug.cgi?id=1221
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: remove special meaning of ->quiesce(.., 2)

commit b03e0ccb5ab9df3efbe51c87843a1ffbecbafa1f upstream.

The '2' argument means "wake up anything that is waiting".
This is an inelegant part of the design and was added
to help support management of suspend_lo/suspend_hi setting.
Now that suspend_lo/hi is managed in mddev_suspend/resume,
that need is gone.
These is still a couple of places where we call 'quiesce'
with an argument of '2', but they can safely be changed to
call ->quiesce(.., 1); ->quiesce(.., 0) which
achieve the same result at the small cost of pausing IO
briefly.

This removes a small "optimization" from suspend_{hi,lo}_store,
but it isn't clear that optimization served a useful purpose.
The code now is a lot clearer.

Suggested-by: Shaohua Li <shli@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: allow metadata update while suspending.

commit 35bfc52187f6df8779d0f1cebdb52b7f797baf4e upstream.

There are various deadlocks that can occur
when a thread holds reconfig_mutex and calls
->quiesce(mddev, 1).
As some write request block waiting for
metadata to be updated (e.g. to record device
failure), and as the md thread updates the metadata
while the reconfig mutex is held, holding the mutex
can stop write requests completing, and this prevents
->quiesce(mddev, 1) from completing.

->quiesce() is now usually called from mddev_suspend(),
and it is always called with reconfig_mutex held. So
at this time it is safe for the thread to update metadata
without explicitly taking the lock.

So add 2 new flags, one which says the unlocked updates is
allowed, and one which ways it is happening. Then allow it
while the quiesce completes, and then wait for it to finish.

Reported-and-tested-by: Xiao Ni <xni@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: use mddev_suspend/resume instead of ->quiesce()

commit 9e1cc0a54556a6c63dc0cfb7cd7d60d43337bba6 upstream.

mddev_suspend() is a more general interface than
calling ->quiesce() and is so more extensible. A
future patch will make use of this.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: move suspend_hi/lo handling into core md code

commit b3143b9a38d5039bcd1f2d1c94039651bfba8043 upstream.

responding to ->suspend_lo and ->suspend_hi is similar
to responding to ->suspended. It is best to wait in
the common core code without incrementing ->active_io.
This allows mddev_suspend()/mddev_resume() to work while
requests are waiting for suspend_lo/hi to change.
This is will be important after a subsequent patch
which uses mddev_suspend() to synchronize updating for
suspend_lo/hi.

So move the code for testing suspend_lo/hi out of raid1.c
and raid5.c, and place it in md.c

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: don't call bitmap_create() while array is quiesced.

commit 52a0d49de3d592a3118e13f35985e3d99eaf43df upstream.

bitmap_create() allocates memory with GFP_KERNEL and
so can wait for IO.
If called while the array is quiesced, it could wait indefinitely
for write out to the array - deadlock.
So call bitmap_create() before quiescing the array.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: always hold reconfig_mutex when calling mddev_suspend()

commit 4d5324f760aacaefeb721b172aa14bf66045c332 upstream.

Most often mddev_suspend() is called with
reconfig_mutex held.  Make this a requirement in
preparation a subsequent patch.  Also require
reconfig_mutex to be held for mddev_resume(),
partly for symmetry and partly to guarantee
no races with incr/decr of mddev->suspend.

Taking the mutex in r5c_disable_writeback_async() is
a little tricky as this is called from a work queue
via log->disable_writeback_work, and flush_work()
is called on that while holding ->reconfig_mutex.
If the work item hasn't run before flush_work()
is called, the work function will not be able to
get the mutex.

So we use mddev_trylock() inside the wait_event() call, and have that
abort when conf->log is set to NULL, which happens before
flush_work() is called.
We wait in mddev->sb_wait and ensure this is woken
when any of the conditions change.  This requires
waking mddev->sb_wait in mddev_unlock().  This is only
like to trigger extra wake_ups of threads that needn't
be woken when metadata is being written, and that
doesn't happen often enough that the cost would be
noticeable.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: fix NULL-ptr in nf_tables_dump_obj()

commit 360cc79d9d299ce297b205508276285ceffc5fa8 upstream.

The table field in nft_obj_filter is not an array. In order to check
tablename, we should check if the pointer is set.

Test commands:

   %nft add table ip filter
   %nft add counter ip filter ct1
   %nft reset counters

Splat looks like:

[  306.510504] kasan: CONFIG_KASAN_INLINE enabled
[  306.516184] kasan: GPF could be caused by NULL-ptr deref or user memory access
[  306.524775] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[  306.528284] Modules linked in: nft_objref nft_counter nf_tables nfnetlink ip_tables x_tables
[  306.528284] CPU: 0 PID: 1488 Comm: nft Not tainted 4.17.0-rc4+ #17
[  306.528284] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015
[  306.528284] RIP: 0010:nf_tables_dump_obj+0x52c/0xa70 [nf_tables]
[  306.528284] RSP: 0018:ffff8800b6cb7520 EFLAGS: 00010246
[  306.528284] RAX: 0000000000000000 RBX: ffff8800b6c49820 RCX: 0000000000000000
[  306.528284] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffffed0016d96e9a
[  306.528284] RBP: ffff8800b6cb75c0 R08: ffffed00236fce7c R09: ffffed00236fce7b
[  306.528284] R10: ffffffff9f6241e8 R11: ffffed00236fce7c R12: ffff880111365108
[  306.528284] R13: 0000000000000000 R14: ffff8800b6c49860 R15: ffff8800b6c49860
[  306.528284] FS:  00007f838b007700(0000) GS:ffff88011b600000(0000) knlGS:0000000000000000
[  306.528284] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  306.528284] CR2: 00007ffeafabcf78 CR3: 00000000b6cbe000 CR4: 00000000001006f0
[  306.528284] Call Trace:
[  306.528284]  netlink_dump+0x470/0xa20
[  306.528284]  __netlink_dump_start+0x5ae/0x690
[  306.528284]  ? nf_tables_getobj+0x1b3/0x740 [nf_tables]
[  306.528284]  nf_tables_getobj+0x2f5/0x740 [nf_tables]
[  306.528284]  ? nft_obj_notify+0x100/0x100 [nf_tables]
[  306.528284]  ? nf_tables_getobj+0x740/0x740 [nf_tables]
[  306.528284]  ? nf_tables_dump_flowtable_done+0x70/0x70 [nf_tables]
[  306.528284]  ? nft_obj_notify+0x100/0x100 [nf_tables]
[  306.528284]  nfnetlink_rcv_msg+0x8ff/0x932 [nfnetlink]
[  306.528284]  ? nfnetlink_rcv_msg+0x216/0x932 [nfnetlink]
[  306.528284]  netlink_rcv_skb+0x1c9/0x2f0
[  306.528284]  ? nfnetlink_bind+0x1d0/0x1d0 [nfnetlink]
[  306.528284]  ? debug_check_no_locks_freed+0x270/0x270
[  306.528284]  ? netlink_ack+0x7a0/0x7a0
[  306.528284]  ? ns_capable_common+0x6e/0x110
[ ... ]

Fixes: e46abbcc05aa8 ("netfilter: nf_tables: Allow table names of up to 255 chars")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: add missing netlink attrs to policies

commit 467697d289e7e6e1b15910d99096c0da08c56d5b upstream.

Fixes: 8aeff920dcc9 ("netfilter: nf_tables: add stateful object reference to set elements")
Fixes: f25ad2e907f1 ("netfilter: nf_tables: prepare for expressions associated to set elements")
Fixes: 1a94e38d254b ("netfilter: nf_tables: add NFTA_RULE_ID attribute")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: fix memory leak on error exit return

commit f0dfd7a2b35b02030949100247d851b793cb275f upstream.

Currently the -EBUSY error return path is not free'ing resources
allocated earlier, leaving a memory leak. Fix this by exiting via the
error exit label err5 that performs the necessary resource clean
up.

Detected by CoverityScan, CID#1432975 ("Resource leak")

Fixes: 9744a6fcefcb ("netfilter: nf_tables: check if same extensions are set when adding elements")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: increase nft_counters_enabled in nft_chain_stats_replace()

commit bbb8c61f97e3a2dd91b30d3e57b7964a67569d11 upstream.

When a chain is updated, a counter can be attached. if so,
the nft_counters_enabled should be increased.

test commands:

   %nft add table ip filter
   %nft add chain ip filter input { type filter hook input priority 4\; }
   %iptables-compat -Z input
   %nft delete chain ip filter input

we can see below messages.

[  286.443720] jump label: negative count!
[  286.448278] WARNING: CPU: 0 PID: 1459 at kernel/jump_label.c:197 __static_key_slow_dec_cpuslocked+0x6f/0xf0
[  286.449144] Modules linked in: nf_tables nfnetlink ip_tables x_tables
[  286.449144] CPU: 0 PID: 1459 Comm: nft Tainted: G        W         4.17.0-rc2+ #12
[  286.449144] RIP: 0010:__static_key_slow_dec_cpuslocked+0x6f/0xf0
[  286.449144] RSP: 0018:ffff88010e5176f0 EFLAGS: 00010286
[  286.449144] RAX: 000000000000001b RBX: ffffffffc0179500 RCX: ffffffffb8a82522
[  286.449144] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88011b7e5eac
[  286.449144] RBP: 0000000000000000 R08: ffffed00236fce5c R09: ffffed00236fce5b
[  286.449144] R10: ffffffffc0179503 R11: ffffed00236fce5c R12: 0000000000000000
[  286.449144] R13: ffff88011a28e448 R14: ffff88011a28e470 R15: dffffc0000000000
[  286.449144] FS:  00007f0384328700(0000) GS:ffff88011b600000(0000) knlGS:0000000000000000
[  286.449144] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  286.449144] CR2: 00007f038394bf10 CR3: 0000000104a86000 CR4: 00000000001006f0
[  286.449144] Call Trace:
[  286.449144]  static_key_slow_dec+0x6a/0x70
[  286.449144]  nf_tables_chain_destroy+0x19d/0x210 [nf_tables]
[  286.449144]  nf_tables_commit+0x1891/0x1c50 [nf_tables]
[  286.449144]  nfnetlink_rcv+0x1148/0x13d0 [nfnetlink]
[ ... ]

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: disable preemption in nft_update_chain_stats()

commit ad9d9e85072b668731f356be0a3750a3ba22a607 upstream.

This patch fixes the following splat.

[118709.054937] BUG: using smp_processor_id() in preemptible [00000000] code: test/1571
[118709.054970] caller is nft_update_chain_stats.isra.4+0x53/0x97 [nf_tables]
[118709.054980] CPU: 2 PID: 1571 Comm: test Not tainted 4.17.0-rc6+ #335
[...]
[118709.054992] Call Trace:
[118709.055011] dump_stack+0x5f/0x86
[118709.055026] check_preemption_disabled+0xd4/0xe4

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_meta: fix wrong value dereference in nft_meta_set_eval

commit 97a0549b15a0b466c47f6a0143a490a082c64b4e upstream.

In the nft_meta_set_eval, nftrace value is dereferenced as u32 from sreg.
But correct type is u8. so that sometimes incorrect value is dereferenced.

Steps to reproduce:

   %nft add table ip filter
   %nft add chain ip filter input { type filter hook input priority 4\; }
   %nft add rule ip filter input nftrace set 0
   %nft monitor

Sometimes, we can see trace messages.

   trace id 16767227 ip filter input packet: iif "enp2s0"
   ether saddr xx:xx:xx:xx:xx:xx ether daddr xx:xx:xx:xx:xx:xx
   ip saddr 192.168.0.1 ip daddr 255.255.255.255 ip dscp cs0
   ip ecn not-ect ip
   trace id 16767227 ip filter input rule nftrace set 0 (verdict continue)
   trace id 16767227 ip filter input verdict continue
   trace id 16767227 ip filter input

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: bogus EBUSY in chain deletions

commit bb7b40aecbf778c0c83a5bd62b0f03ca9f49a618 upstream.

When removing a rule that jumps to chain and such chain in the same
batch, this bogusly hits EBUSY. Add activate and deactivate operations
to expression that can be called from the preparation and the
commit/abort phases.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: don't assume chain stats are set when jumplabel is set

commit 009240940e84c1c089af88b454f7e804a4c5bd1b upstream.

nft_chain_stats_replace() and all other spots assume ->stats can be
NULL, but nft_update_chain_stats does not. It must do this check,
just because the jump label is set doesn't mean all basechains have stats
assigned.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_compat: fix handling of large matchinfo size

commit 732a8049f365f514d0607e03938491bf6cb0d620 upstream.

currently matchinfo gets stored in the expression, but some xt matches
are very large.

To handle those we either need to switch nft core to kvmalloc and increase
size limit, or allocate the info blob of large matches separately.

This does the latter, this limits the scope of the changes to
nft_compat.

I picked a threshold of 192, this allows most matches to work as before and
handle only few ones via separate alloation (cgroup, u32, sctp, rt).

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_compat: prepare for indirect info storage

commit 8bdf164744b2c7f63561846c01cff3db597f282d upstream.

Next patch will make it possible for *info to be stored in
a separate allocation instead of the expr private area.

This removes the 'expr priv area is info blob' assumption
from the match init/destroy/eval functions.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: nft_compat: fix refcount leak on xt module

commit b8e9dc1c75714ceb53615743e1036f76e00f5a17 upstream.

Taehee Yoo reported following bug:
    iptables-compat -I OUTPUT -m cpu --cpu 0
    iptables-compat -F
    lsmod |grep xt_cpu
    xt_cpu                 16384  1

Quote:
"When above command is given, a netlink message has two expressions that
are the cpu compat and the nft_counter.
The nft_expr_type_get() in the nf_tables_expr_parse() successes
first expression then, calls select_ops callback.
(allocates memory and holds module)
But, second nft_expr_type_get() in the nf_tables_expr_parse()
returns -EAGAIN because of request_module().
In that point, by the 'goto err1',
the 'module_put(info[i].ops->type->owner)' is called.
There is no release routine."

The core problem is that unlike all other expression,
nft_compat select_ops has side effects.

1. it allocates dynamic memory which holds an nft ops struct.
   In all other expressions, ops has static storage duration.
2. It grabs references to the xt module that it is supposed to
   invoke.

Depending on where things go wrong, error unwinding doesn't
always do the right thing.

In the above scenario, a new nft_compat_expr is created and
xt_cpu module gets loaded with a refcount of 1.

Due to to -EAGAIN, the netlink messages get re-parsed.
When that happens, nft_compat finds that xt_cpu is already present
and increments module refcount again.

This fixes the problem by making select_ops to have no visible
side effects and removes all extra module_get/put.

When select_ops creates a new nft_compat expression, the new
expression has a refcount of 0, and the xt module gets its refcount
incremented.

When error happens, the next call finds existing entry, but will no
longer increase the reference count -- the presence of existing
nft_xt means we already hold a module reference.

Because nft_xt_put is only called from nft_compat destroy hook,
it will never see the initial zero reference count.
->destroy can only be called after ->init(), and that will increase the
refcount.

Lastly, we now free nft_xt struct with kfree_rcu.
Else, we get use-after free in nf_tables_rule_destroy:

  while (expr != nft_expr_last(rule) && expr->ops) {
    nf_tables_expr_destroy(ctx, expr);
    expr = nft_expr_next(expr); // here

nft_expr_next() dereferences expr->ops. This is safe
for all users, as ops have static storage duration.
In nft_compat case however, its ->destroy callback can
free the memory that hold the ops structure.

Tested-by: Taehee Yoo <ap420073@gmail.com>
Reported-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Enable provoking vertex fix on Gen9 systems.

commit 7a3727f385dc64773db1c144f6b15c1e9d4735bb upstream.

The SF and clipper units mishandle the provoking vertex in some cases,
which can cause misrendering with shaders that use flat shaded inputs.

There are chicken bits in 3D_CHICKEN3 (for SF) and FF_SLICE_CHICKEN
(for the clipper) that work around the issue. These registers are
unfortunately not part of the logical context (even the power context),
and so we must reload them every time we start executing in a context.

Bugzilla: https://bugs.freedesktop.org/103047
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180615190605.16238-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
(cherry picked from commit b77422f80337d363eed60c8c48db9cb6e33085c9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Refactor amdgpu_vram_mgr_bo_invisible_size helper

commit 5e9244ff585239630f15f8ad8e676bc91a94ca9e upstream.

Preparation for the following fix, no functional change intended.

Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Use kvmalloc_array for allocating VRAM manager nodes array

commit 6fa39bc1e01dab8b4f54b23e95a181a2ed5a2d38 upstream.

It can be quite big, and there's no need for it to be physically
contiguous. This is less likely to fail under memory pressure (has
actually happened while running piglit).

Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/atmel-hlcdc: check stride values in the first plane

commit 9fcf2b3c1c0276650fea537c71b513d27d929b05 upstream.

The statement always evaluates to true since the struct fields
are arrays. This has shown up as a warning when compiling with
clang:
warning: address of array 'desc->layout.xstride' will always
evaluate to 'true' [-Wpointer-bool-conversion]

Check for values in the first plane instead.

Fixes: 1a396789f65a ("drm: add Atmel HLCDC Display Controller support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180617084826.31885-1-stefan@agner.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/qxl: Call qxl_bo_unref outside atomic context

commit 889ad63d41eea20184b0483e7e585e5b20fb6cfe upstream.

"qxl_bo_unref" may sleep, but calling "qxl_release_map" causes
"preempt_disable()" to be called and "preempt_enable()" isn't called
until "qxl_release_unmap" is used. Move the call to "qxl_bo_unref" out
from in between the two to avoid sleeping from an atomic context.

This issue can be demonstrated on a kernel with CONFIG_LOCKDEP=y by
creating a VM using QXL, using a desktop environment using Xorg, then
moving the cursor on or off a window.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1571128
Fixes: 9428088c90b6 ("drm/qxl: reapply cursor after resetting primary")
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180601200532.13619-1-jcline@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: fix the missed vcn fw version report

commit a0b2ac29415bb44d1c212184c1385a1abe68db5c upstream.

It missed vcn.fw_version setting when init vcn microcode, and it will be used to
report vcn ucode version via amdgpu_firmware_info sysfs interface.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Add APU support in vi_set_vce_clocks

commit 08ebb6e9f4fd7098c28e0ebbb42847cf0488ebb8 upstream.

1. fix set vce clocks failed on Cz/St
which lead 1s delay when boot up.
2. remove the workaround in vce_v3_0.c

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Add APU support in vi_set_uvd_clocks

commit 819a23f83e3b2513cffbef418458a47ca02c36b3 upstream.

fix the issue set uvd clock failed on CZ/ST
which lead 1s delay when boot up.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt: prevent leaking uninitialized data to userspace via /dev/vcs*

commit 21eff69aaaa0e766ca0ce445b477698dc6a9f55a upstream.

KMSAN reported an infoleak when reading from /dev/vcs*:

  BUG: KMSAN: kernel-infoleak in vcs_read+0x18ba/0x1cc0
  Call Trace:
  ...
   kmsan_copy_to_user+0x7a/0x160 mm/kmsan/kmsan.c:1253
   copy_to_user ./include/linux/uaccess.h:184
   vcs_read+0x18ba/0x1cc0 drivers/tty/vt/vc_screen.c:352
   __vfs_read+0x1b2/0x9d0 fs/read_write.c:416
   vfs_read+0x36c/0x6b0 fs/read_write.c:452
  ...
  Uninit was created at:
   kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279
   kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:189
   kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:315
   __kmalloc+0x13a/0x350 mm/slub.c:3818
   kmalloc ./include/linux/slab.h:517
   vc_allocate+0x438/0x800 drivers/tty/vt/vt.c:787
   con_install+0x8c/0x640 drivers/tty/vt/vt.c:2880
   tty_driver_install_tty drivers/tty/tty_io.c:1224
   tty_init_dev+0x1b5/0x1020 drivers/tty/tty_io.c:1324
   tty_open_by_driver drivers/tty/tty_io.c:1959
   tty_open+0x17b4/0x2ed0 drivers/tty/tty_io.c:2007
   chrdev_open+0xc25/0xd90 fs/char_dev.c:417
   do_dentry_open+0xccc/0x1440 fs/open.c:794
   vfs_open+0x1b6/0x2f0 fs/open.c:908
  ...
  Bytes 0-79 of 240 are uninitialized

Consistently allocating |vc_screenbuf| with kzalloc() fixes the problem

Reported-by: syzbot+17a8efdf800000@syzkaller.appspotmail.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serdev: fix memleak on module unload

commit bc6cf3669d22371f573ab0305b3abf13887c0786 upstream.

Make sure to free all resources associated with the ida on module
exit.

Fixes: cd6484e1830b ("serdev: Introduce new bus for serial attached devices")
Cc: stable <stable@vger.kernel.org> # 4.11
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_pci: Remove stalled entries in blacklist

commit 20dcff436e9fcd2e106b0ccc48a52206bc176d70 upstream.

After the commit

7d8905d06405 ("serial: 8250_pci: Enable device after we check black list")

pure serial multi-port cards, such as CH355, got blacklisted and thus
not being enumerated anymore. Previously, it seems, blacklisting them
was on purpose to shut up pciserial_init_one() about record duplication.

So, remove the entries from blacklist in order to get cards enumerated.

Fixes: 7d8905d06405 ("serial: 8250_pci: Enable device after we check black list")
Reported-by: Matt Turner <mattst88@gmail.com>
Cc: Sergej Pupykin <ml@sergej.pp.ru>
Cc: Alexandr Petrenko <petrenkoas83@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-and-Tested-by: Matt Turner <mattst88@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: Return an ERR_PTR in ion_map_kernel

commit 0a2bc00341dcfcc793c0dbf4f8d43adf60458b05 upstream.

The expected return value from ion_map_kernel is an ERR_PTR. The error
path for a vmalloc failure currently just returns NULL, triggering
a warning in ion_buffer_kmap_get. Encode the vmalloc failure as an ERR_PTR.

Reported-by: syzbot+55b1d9f811650de944c6@syzkaller.appspotmail.com
Signed-off-by: Laura Abbott <labbott@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

n_tty: Access echo_* variables carefully.

commit ebec3f8f5271139df618ebdf8427e24ba102ba94 upstream.

syzbot is reporting stalls at __process_echoes() [1]. This is because
since ldata->echo_commit < ldata->echo_tail becomes true for some reason,
the discard loop is serving as almost infinite loop. This patch tries to
avoid falling into ldata->echo_commit < ldata->echo_tail situation by
making access to echo_* variables more carefully.

Since reset_buffer_flags() is called without output_lock held, it should
not touch echo_* variables. And omit a call to reset_buffer_flags() from
n_tty_open() by using vzalloc().

Since add_echo_byte() is called without output_lock held, it needs memory
barrier between storing into echo_buf[] and incrementing echo_head counter.
echo_buf() needs corresponding memory barrier before reading echo_buf[].
Lack of handling the possibility of not-yet-stored multi-byte operation
might be the reason of falling into ldata->echo_commit < ldata->echo_tail
situation, for if I do WARN_ON(ldata->echo_commit == tail + 1) prior to
echo_buf(ldata, tail + 1), the WARN_ON() fires.

Also, explicitly masking with buffer for the former "while" loop, and
use ldata->echo_commit > tail for the latter "while" loop.

[1] https://syzkaller.appspot.com/bug?id=17f23b094cd80df750e5b0f8982c521ee6bcbf40

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+108696293d7a21ab688f@syzkaller.appspotmail.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

n_tty: Fix stall at n_tty_receive_char_special().

commit 3d63b7e4ae0dc5e02d28ddd2fa1f945defc68d81 upstream.

syzbot is reporting stalls at n_tty_receive_char_special() [1]. This is
because comparison is not working as expected since ldata->read_head can
change at any moment. Mitigate this by explicitly masking with buffer size
when checking condition for "while" loops.

[1] https://syzkaller.appspot.com/bug?id=3d7481a346958d9469bebbeb0537d5f056bdd6e8

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+18df353d7540aa6b5467@syzkaller.appspotmail.com>
Fixes: bc5a5e3f45d04784 ("n_tty: Don't wrap input buffer indices at buffer size")
Cc: stable <stable@vger.kernel.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Fix kernel oops in trace_xhci_free_virt_device

commit d850c1658328e757635a46763783c6fd56390dcb upstream.

commit 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device")
set dev->udev pointer to NULL in xhci_free_dev(), it will cause kernel
panic in trace_xhci_free_virt_device. This patch reimplement the trace
function trace_xhci_free_virt_device, remove dev->udev dereference and
added more useful parameters to show in the trace function,it also makes
sure dev->udev is not NULL before calling trace_xhci_free_virt_device.
This issue happened when xhci-hcd trace is enabled and USB devices hot
plug test. Original use-after-free patch went to stable so this needs so
be applied there as well.

[ 1092.022457] usb 2-4: USB disconnect, device number 6
[ 1092.092772] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[ 1092.101694] PGD 0 P4D 0
[ 1092.104601] Oops: 0000 [#1] SMP
[ 1092.207734] Workqueue: usb_hub_wq hub_event
[ 1092.212507] RIP: 0010:trace_event_raw_event_xhci_log_virt_dev+0x6c/0xf0
[ 1092.220050] RSP: 0018:ffff8c252e883d28 EFLAGS: 00010086
[ 1092.226024] RAX: ffff8c24af86fa84 RBX: 0000000000000003 RCX: ffff8c25255c2a01
[ 1092.234130] RDX: 0000000000000000 RSI: 00000000aef55009 RDI: ffff8c252e883d28
[ 1092.242242] RBP: ffff8c252550e2c0 R08: ffff8c24af86fa84 R09: 0000000000000a70
[ 1092.250364] R10: 0000000000000a70 R11: 0000000000000000 R12: ffff8c251f21a000
[ 1092.258468] R13: 000000000000000c R14: ffff8c251f21a000 R15: ffff8c251f432f60
[ 1092.266572] FS:  0000000000000000(0000) GS:ffff8c252e880000(0000) knlGS:0000000000000000
[ 1092.275757] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1092.282281] CR2: 0000000000000000 CR3: 0000000154209001 CR4: 00000000003606e0
[ 1092.290384] Call Trace:
[ 1092.293156]  <IRQ>
[ 1092.295439]  xhci_free_virt_device.part.34+0x182/0x1a0
[ 1092.301288]  handle_cmd_completion+0x7ac/0xfa0
[ 1092.306336]  ? trace_event_raw_event_xhci_log_trb+0x6e/0xa0
[ 1092.312661]  xhci_irq+0x3e8/0x1f60
[ 1092.316524]  __handle_irq_event_percpu+0x75/0x180
[ 1092.321876]  handle_irq_event_percpu+0x20/0x50
[ 1092.326922]  handle_irq_event+0x36/0x60
[ 1092.331273]  handle_edge_irq+0x6d/0x180
[ 1092.335644]  handle_irq+0x16/0x20
[ 1092.339417]  do_IRQ+0x41/0xc0
[ 1092.342782]  common_interrupt+0xf/0xf
[ 1092.346955]  </IRQ>

Fixes: 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device")
Cc: <stable@vger.kernel.org>
Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: ucsi: Fix for incorrect status data issue

commit 68816e16b4789f2d05e77b6dcb77564cf5d6a8d8 upstream.

According to UCSI Specification, Connector Change Event only
means a change in the Connector Status and Operation Mode
fields of the STATUS data structure. So any other change
should create another event.

Unfortunately on some platforms the firmware acting as PPM
(platform policy manager - usually embedded controller
firmware) still does not report any other status changes if
there is a connector change event. So if the connector power
or data role was changed when a device was plugged to the
connector, the driver does not get any indication about
that. The port will show wrong roles if that happens.

To fix the issue, always checking the data and power role
together with a connector change event.

Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface")
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: ucsi: acpi: Workaround for cache mode issue

commit 1f9f9d168ce619608572b01771c47a41b15429e6 upstream.

This fixes an issue where the driver fails with an error:

ioremap error for 0x3f799000-0x3f79a000, requested 0x2, got 0x0

On some platforms the UCSI ACPI mailbox SystemMemory
Operation Region may be setup before the driver has been
loaded. That will lead into the driver failing to map the
mailbox region, as it has been already marked as write-back
memory. acpi_os_ioremap() for x86 uses ioremap_cache()
unconditionally.

When the issue happens, the embedded controller has a
pending query event for the UCSI notification right after
boot-up which causes the operation region to be setup before
UCSI driver has been loaded.

The fix is to notify acpi core that the driver is about to
access memory region which potentially overlaps with an
operation region right before mapping it.
acpi_release_memory() will check if the memory has already
been setup (mapped) by acpi core, and deactivate it (unmap)
if it has. The driver is then able to map the memory with
ioremap_nocache() and set the memtype to uncached for the
region.

Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Fixes: 8243edf44152 ("usb: typec: ucsi: Add ACPI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

acpi: Add helper for deactivating memory region

commit d2d2e3c46be5d6dd8001d0eebdf7cafb9bc7006b upstream.

Sometimes memory resource may be overlapping with
SystemMemory Operation Region by design, for example if the
memory region is used as a mailbox for communication with a
firmware in the system. One occasion of such mailboxes is
USB Type-C Connector System Software Interface (UCSI).

With regions like that, it is important that the driver is
able to map the memory with the requirements it has. For
example, the driver should be allowed to map the memory as
non-cached memory. However, if the operation region has been
accessed before the driver has mapped the memory, the memory
has been marked as write-back by the time the driver is
loaded. That means the driver will fail to map the memory
if it expects non-cached memory.

To work around the problem, introducing helper that the
drivers can use to temporarily deactivate (unmap)
SystemMemory Operation Regions that overlap with their
IO memory.

Fixes: 8243edf44152 ("usb: typec: ucsi: Add ACPI driver")
Cc: stable@vger.kernel.org
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: fix the incorrect bitmaps for the ports of multi_tt hub

commit 8760675932ddb614e83702117d36ea644050c609 upstream.

The dwc2_get_ls_map() use ttport to reference into the
bitmap if we're on a multi_tt hub. But the bitmaps index
from 0 to (hub->maxchild - 1), while the ttport index from
1 to hub->maxchild. This will cause invalid memory access
when the number of ttport is hub->maxchild.

Without this patch, I can easily meet a Kernel panic issue
if connect a low-speed USB mouse with the max port of FE2.1
multi-tt hub (1a40:0201) on rk3288 platform.

Fixes: 9f9f09b048f5 ("usb: dwc2: host: Totally redo the microframe scheduler")
Cc: <stable@vger.kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Minas Harutyunyan hminas@synopsys.com>
Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: cp210x: add Silicon Labs IDs for Windows Update

commit 2f839823382748664b643daa73f41ee0cc01ced6 upstream.

Silicon Labs defines alternative VID/PID pairs for some chips that when
used will automatically install drivers for Windows users without manual
intervention. Unfortunately, these IDs are not recognized by the Linux
module, so using these IDs improves user experience on one platform but
degrades it on Linux. This patch addresses this problem.

Signed-off-by: Karoly Pados <pados@pados.hu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: cp210x: add CESINEL device ids

commit 24160628a34af962ac99f2f58e547ac3c4cbd26f upstream.

Add device ids for CESINEL products.

Reported-by: Carlos Barcala Lara <cabl@cesinel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdc_acm: Add quirk for Uniden UBC125 scanner

commit 4a762569a2722b8a48066c7bacf0e1dc67d17fa1 upstream.

Uniden UBC125 radio scanner has USB interface which fails to work
with cdc_acm driver:
  usb 1-1.5: new full-speed USB device number 4 using xhci_hcd
  cdc_acm 1-1.5:1.0: Zero length descriptor references
  cdc_acm: probe of 1-1.5:1.0 failed with error -22

Adding the NO_UNION_NORMAL quirk for the device fixes the issue:
  usb 1-4: new full-speed USB device number 15 using xhci_hcd
  usb 1-4: New USB device found, idVendor=1965, idProduct=0018
  usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  usb 1-4: Product: UBC125XLT
  usb 1-4: Manufacturer: Uniden Corp.
  usb 1-4: SerialNumber: 0001
  cdc_acm 1-4:1.0: ttyACM0: USB ACM device

`lsusb -v` of the device:

  Bus 001 Device 015: ID 1965:0018 Uniden Corporation
  Device Descriptor:
    bLength                18
    bDescriptorType         1
    bcdUSB               2.00
    bDeviceClass            2 Communications
    bDeviceSubClass         0
    bDeviceProtocol         0
    bMaxPacketSize0        64
    idVendor           0x1965 Uniden Corporation
    idProduct          0x0018
    bcdDevice            0.01
    iManufacturer           1 Uniden Corp.
    iProduct                2 UBC125XLT
    iSerial                 3 0001
    bNumConfigurations      1
    Configuration Descriptor:
      bLength                 9
      bDescriptorType         2
      wTotalLength           48
      bNumInterfaces          2
      bConfigurationValue     1
      iConfiguration          0
      bmAttributes         0x80
        (Bus Powered)
      MaxPower              500mA
      Interface Descriptor:
        bLength                 9
        bDescriptorType         4
        bInterfaceNumber        0
        bAlternateSetting       0
        bNumEndpoints           1
        bInterfaceClass         2 Communications
        bInterfaceSubClass      2 Abstract (modem)
        bInterfaceProtocol      0 None
        iInterface              0
        Endpoint Descriptor:
          bLength                 7
          bDescriptorType         5
          bEndpointAddress     0x87  EP 7 IN
          bmAttributes            3
            Transfer Type            Interrupt
            Synch Type               None
            Usage Type               Data
          wMaxPacketSize     0x0008  1x 8 bytes
          bInterval              10
      Interface Descriptor:
        bLength                 9
        bDescriptorType         4
        bInterfaceNumber        1
        bAlternateSetting       0
        bNumEndpoints           2
        bInterfaceClass        10 CDC Data
        bInterfaceSubClass      0 Unused
        bInterfaceProtocol      0
        iInterface              0
        Endpoint Descriptor:
          bLength                 7
          bDescriptorType         5
          bEndpointAddress     0x81  EP 1 IN
          bmAttributes            2
            Transfer Type            Bulk
            Synch Type               None
            Usage Type               Data
          wMaxPacketSize     0x0040  1x 64 bytes
          bInterval               0
        Endpoint Descriptor:
          bLength                 7
          bDescriptorType         5
          bEndpointAddress     0x02  EP 2 OUT
          bmAttributes            2
            Transfer Type            Bulk
            Synch Type               None
            Usage Type               Data
          wMaxPacketSize     0x0040  1x 64 bytes
          bInterval               0
  Device Status:     0x0000
    (Bus Powered)

Signed-off-by: Houston Yaroschoff <hstn@4ever3.net>
Cc: stable <stable@vger.kernel.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>