RISC-V: ACPI : Fix for usage of pointers in different address space

The arch specific __acpi_map_table can be wrapper around either
early_memremap or early_ioremap. But early_memremap
routine works with normal pointers whereas __acpi_map_table expects
pointers in iomem address space. This causes kernel test bot to fail
while using the sparse tool. Fix the issue by using early_ioremap and
similar fix done for __acpi_unmap_table.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202305201427.I7QhPjNW-lkp@intel.com/
Fixes: a91a9ffbd3a5 ("RISC-V: Add support to build the ACPI core")
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230607112417.782085-2-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: hibernation: Remove duplicate call of suspend_restore_csrs

The suspend_restore_csrs is called in both __hibernate_cpu_resume
and the `else` of subsequent swsusp_arch_suspend.

Removing the first call makes both suspend_{save,restore}_csrs
left in swsusp_arch_suspend for clean code.

Fixes: c0317210012e ("RISC-V: Add arch functions to support hibernation/suspend-to-disk")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: JeeHeng Sia <jeeheng.sia@starfivetech.com>
Signed-off-by: Song Shuai <songshuaishuai@tinylab.org>
Link: https://lore.kernel.org/r/20230522025020.285042-1-songshuaishuai@tinylab.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: hibernation: Replace jalr with jr before suspend_restore_regs

No need to link the x1/ra reg via jalr before suspend_restore_regs
So it's better to replace jalr with jr.

Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Reviewed-by: JeeHeng Sia <jeeheng.sia@starfivetech.com >
Link: https://lore.kernel.org/r/20230519060854.214138-1-suagrfillet@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: mm: stub extable related functions/macros for !MMU

extable relies on the MMU to work properly, so it's useless to
include __ex_table sections and build extable related functions for
!MMU case.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20230509152641.805-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: say disabling zicbom if no or bad riscv,cbom-block-size found

If Zicbom is present but there was no riscv,cbom-blocks-size property found
during the cpu feeatures probe, or the cbom-block-size is not valid, then
the extension will be disabled. Make the print explicitly say this is
disabled to ensure that there is no confusion about what is being done.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230317134512.254627-1-ben.dooks@codethink.co.uk
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge patch series "riscv: Add vector ISA support"

Andy Chiu <andy.chiu@sifive.com> says:

This is the v21 patch series for adding Vector extension support in
Linux. Please refer to [1] for the introduction of the patchset. The
v21 patch series was aimed to solve build issues from v19, provide usage
guideline for the prctl interface, and address review comments on v20.

Thank every one who has been reviewing, suggesting on the topic. Hope
this get a step closer to the final merge.

* b4-shazam-merge: (27 commits)
  selftests: add .gitignore file for RISC-V hwprobe
  selftests: Test RISC-V Vector prctl interface
  riscv: Add documentation for Vector
  riscv: Enable Vector code to be built
  riscv: detect assembler support for .option arch
  riscv: Add sysctl to set the default vector rule for new processes
  riscv: Add prctl controls for userspace vector management
  riscv: hwcap: change ELF_HWCAP to a function
  riscv: KVM: Add vector lazy save/restore support
  riscv: kvm: Add V extension to KVM ISA
  riscv: prevent stack corruption by reserving task_pt_regs(p) early
  riscv: signal: validate altstack to reflect Vector
  riscv: signal: Report signal frame size to userspace via auxv
  riscv: signal: Add sigcontext save/restore for vector
  riscv: signal: check fp-reserved words unconditionally
  riscv: Add ptrace vector support
  riscv: Allocate user's vector context in the first-use trap
  riscv: Add task switch support for vector
  riscv: Introduce struct/helpers to save/restore per-task Vector state
  riscv: Introduce riscv_v_vsize to record size of Vector context
  ...

Link: https://lore.kernel.org/r/20230605110724.21391-1-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

selftests: add .gitignore file for RISC-V hwprobe

The executable file "hwprobe" should be ignored by git, adding it to fix
that.

Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Link: https://lore.kernel.org/r/20230605110724.21391-28-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

selftests: Test RISC-V Vector prctl interface

This add a test for prctl interface that controls the use of userspace
Vector.

Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Link: https://lore.kernel.org/r/20230605110724.21391-27-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Add documentation for Vector

This patch add a brief documentation of the userspace interface in
regard to the RISC-V Vector extension.

Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Co-developed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20230605110724.21391-26-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Enable Vector code to be built

This patch adds configs for building Vector code. First it detects the
reqired toolchain support for building the code. Then it provides an
option setting whether Vector is implicitly enabled to userspace.

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Co-developed-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230605110724.21391-25-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: detect assembler support for .option arch

Some extensions use .option arch directive to selectively enable certain
extensions in parts of its assembly code. For example, Zbb uses it to
inform assmebler to emit bit manipulation instructions. However,
supporting of this directive only exist on GNU assembler and has not
landed on clang at the moment, making TOOLCHAIN_HAS_ZBB depend on
AS_IS_GNU.

While it is still under review at https://reviews.llvm.org/D123515, the
upcoming Vector patch also requires this feature in assembler. Thus,
provide Kconfig AS_HAS_OPTION_ARCH to detect such feature. Then
TOOLCHAIN_HAS_XXX will be turned on automatically when the feature land.

Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230605110724.21391-24-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Add sysctl to set the default vector rule for new processes

To support Vector extension, the series exports variable-length vector
registers on the signal frame. However, this potentially breaks abi if
processing vector registers is required in the signal handler for old
binaries. For example, there is such need if user-level context switch
is triggerred via signals[1].

For this reason, it is best to leave a decision to distro maintainers,
where the enablement of userspace Vector for new launching programs can
be controlled. Developers may also need the switch to experiment with.
The parameter is configurable through sysctl interface so a distro may
turn off Vector early at init script if the break really happens in the
wild.

The switch will only take effects on new execve() calls once set. This
will not effect existing processes that do not call execve(), nor
processes which has been set with a non-default vstate_ctrl by making
explicit PR_RISCV_V_SET_CONTROL prctl() calls.

Link: https://lore.kernel.org/all/87cz4048rp.fsf@all.your.base.are.belong.to.us/
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230605110724.21391-23-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Add prctl controls for userspace vector management

This patch add two riscv-specific prctls, to allow usespace control the
use of vector unit:

 * PR_RISCV_V_SET_CONTROL: control the permission to use Vector at next,
   or all following execve for a thread. Turning off a thread's Vector
   live is not possible since libraries may have registered ifunc that
   may execute Vector instructions.
 * PR_RISCV_V_GET_CONTROL: get the same permission setting for the
   current thread, and the setting for following execve(s).

Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Link: https://lore.kernel.org/r/20230605110724.21391-22-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: hwcap: change ELF_HWCAP to a function

Using a function is flexible to represent ELF_HWCAP. So the kernel may
encode hwcap reflecting supported hardware features just at the moment of
the start of each program.

This will be helpful when we introduce prctl/sysctl interface to control
per-process availability of Vector extension in following patches.
Programs started with V disabled should see V masked off in theirs
ELF_HWCAP.

Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230605110724.21391-21-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: KVM: Add vector lazy save/restore support

This patch adds vector context save/restore for guest VCPUs. To reduce the
impact on KVM performance, the implementation imitates the FP context
switch mechanism to lazily store and restore the vector context only when
the kernel enters/exits the in-kernel run loop and not during the KVM
world switch.

Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20230605110724.21391-20-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: kvm: Add V extension to KVM ISA

Add V extension to KVM isa extension list to enable supporting of V
extension on VCPUs.

Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230605110724.21391-19-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: prevent stack corruption by reserving task_pt_regs(p) early

Early function calls, such as setup_vm(), relocate_enable_mmu(),
soc_early_init() etc, are free to operate on stack. However,
PT_SIZE_ON_STACK bytes at the head of the kernel stack are purposedly
reserved for the placement of per-task register context pointed by
task_pt_regs(p). Those functions may corrupt task_pt_regs if we overlap
the $sp with it. In fact, we had accidentally corrupted sstatus.VS in some
tests, treating the kernel to save V context before V was actually
allocated, resulting in a kernel panic.

Thus, we should skip PT_SIZE_ON_STACK for $sp before making C function
calls from the top-level assembly.

Co-developed-by: ShihPo Hung <shihpo.hung@sifive.com>
Signed-off-by: ShihPo Hung <shihpo.hung@sifive.com>
Co-developed-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230605110724.21391-18-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: signal: validate altstack to reflect Vector

Some extensions, such as Vector, dynamically change footprint on a
signal frame, so MINSIGSTKSZ is no longer accurate. For example, an
RV64V implementation with vlen = 512 may occupy 2K + 40 + 12 Bytes of a
signal frame with the upcoming support. And processes that do not
execute any vector instructions do not need to reserve the extra
sigframe. So we need a way to guard the allocation size of the sigframe
at process runtime according to current status of V.

Thus, provide the function sigaltstack_size_valid() to validate its size
based on current allocation status of supported extensions.

Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230605110724.21391-17-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: signal: Report signal frame size to userspace via auxv

The vector register belongs to the signal context. They need to be stored
and restored as entering and leaving the signal handler. According to the
V-extension specification, the maximum length of the vector registers can
be 2^16. Hence, if userspace refers to the MINSIGSTKSZ to create a
sigframe, it may not be enough. To resolve this problem, this patch refers
to the commit 94b07c1f8c39c
("arm64: signal: Report signal frame size to userspace via auxv") to enable
userspace to know the minimum required sigframe size through the auxiliary
vector and use it to allocate enough memory for signal context.

Note that auxv always reports size of the sigframe as if V exists for
all starting processes, whenever the kernel has CONFIG_RISCV_ISA_V. The
reason is that users usually reference this value to allocate an
alternative signal stack, and the user may use V anytime. So the user
must reserve a space for V-context in sigframe in case that the signal
handler invokes after the kernel allocating V.

Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230605110724.21391-16-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: signal: Add sigcontext save/restore for vector

This patch facilitates the existing fp-reserved words for placement of
the first extension's context header on the user's sigframe. A context
header consists of a distinct magic word and the size, including the
header itself, of an extension on the stack. Then, the frame is followed
by the context of that extension, and then a header + context body for
another extension if exists. If there is no more extension to come, then
the frame must be ended with a null context header. A special case is
rv64gc, where the kernel support no extensions requiring to expose
additional regfile to the user. In such case the kernel would place the
null context header right after the first reserved word of
__riscv_q_ext_state when saving sigframe. And the kernel would check if
all reserved words are zeros when a signal handler returns.

__riscv_q_ext_state---->| |<-__riscv_extra_ext_header
~ ~
.reserved[0]--->|0 |<- .reserved
<-------|magic |<- .hdr
| |size |_______ end of sc_fpregs
| |ext-bdy|
| ~ ~
+)size ------->|magic |<- another context header
|size |
|ext-bdy|
~ ~
|magic:0|<- null context header
|size:0 |

The vector registers will be saved in datap pointer. The datap pointer
will be allocated dynamically when the task needs in kernel space. On
the other hand, datap pointer on the sigframe will be set right after
the __riscv_v_ext_state data structure.

Co-developed-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Suggested-by: Vineet Gupta <vineetg@rivosinc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230605110724.21391-15-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: signal: check fp-reserved words unconditionally

In order to let kernel/user locate and identify an extension context on
the existing sigframe, we are going to utilize reserved space of fp and
encode the information there. And since the sigcontext has already
preserved a space for fp context w or w/o CONFIG_FPU, we move those
reserved words checking/setting routine back into generic code.

This commit also undone an additional logical change carried by the
refactor commit 007f5c3589578
("Refactor FPU code in signal setup/return procedures"). Originally we
did not restore fp context if restoring of gpr have failed. And it was
fine on the other side. In such way the kernel could keep the regfiles
intact, and potentially react at the failing point of restore.

Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230605110724.21391-14-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Add ptrace vector support

This patch adds ptrace support for riscv vector. The vector registers will
be saved in datap pointer of __riscv_v_ext_state. This pointer will be set
right after the __riscv_v_ext_state data structure then it will be put in
ubuf for ptrace system call to get or set. It will check if the datap got
from ubuf is set to the correct address or not when the ptrace system call
is trying to set the vector registers.

Co-developed-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230605110724.21391-13-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Allocate user's vector context in the first-use trap

Vector unit is disabled by default for all user processes. Thus, a
process will take a trap (illegal instruction) into kernel at the first
time when it uses Vector. Only after then, the kernel allocates V
context and starts take care of the context for that user process.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/3923eeee-e4dc-0911-40bf-84c34aee962d@linaro.org
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230605110724.21391-12-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Add task switch support for vector

This patch adds task switch support for vector. It also supports all
lengths of vlen.

Suggested-by: Andrew Waterman <andrew@sifive.com>
Co-developed-by: Nick Knight <nick.knight@sifive.com>
Signed-off-by: Nick Knight <nick.knight@sifive.com>
Co-developed-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Co-developed-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Co-developed-by: Ruinland Tsai <ruinland.tsai@sifive.com>
Signed-off-by: Ruinland Tsai <ruinland.tsai@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Vineet Gupta <vineetg@rivosinc.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230605110724.21391-11-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Introduce struct/helpers to save/restore per-task Vector state

Add vector state context struct to be added later in thread_struct. And
prepare low-level helper functions to save/restore vector contexts.

This include Vector Regfile and CSRs holding dynamic configuration state
(vstart, vl, vtype, vcsr). The Vec Register width could be implementation
defined, but same for all processes, so that is saved separately.

This is not yet wired into final thread_struct - will be done when
__switch_to actually starts doing this in later patches.

Given the variable (and potentially large) size of regfile, they are
saved in dynamically allocated memory, pointed to by datap pointer in
__riscv_v_ext_state.

Co-developed-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Vineet Gupta <vineetg@rivosinc.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230605110724.21391-10-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Introduce riscv_v_vsize to record size of Vector context

This patch is used to detect the size of CPU vector registers and use
riscv_v_vsize to save the size of all the vector registers. It assumes all
harts has the same capabilities in a SMP system. If a core detects VLENB
that is different from the boot core, then it warns and turns off V
support for user space.

Co-developed-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Co-developed-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230605110724.21391-9-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Introduce Vector enable/disable helpers

These are small and likely to be frequently called so implement as
inline routines (vs. function call).

Co-developed-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Co-developed-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Vineet Gupta <vineetg@rivosinc.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230605110724.21391-8-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Disable Vector Instructions for kernel itself

Disable vector instructions execution for kernel mode at its entrances.
This helps find illegal uses of vector in the kernel space, which is
similar to the fpu.

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Co-developed-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Co-developed-by: Han-Kuan Chen <hankuan.chen@sifive.com>
Signed-off-by: Han-Kuan Chen <hankuan.chen@sifive.com>
Co-developed-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Vineet Gupta <vineetg@rivosinc.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230605110724.21391-7-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Clear vector regfile on bootup

clear vector registers on boot if kernel supports V.

Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Vineet Gupta <vineetg@rivosinc.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230605110724.21391-6-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Add new csr defines related to vector extension

Follow the riscv vector spec to add new csr numbers.

Acked-by: Guo Ren <guoren@kernel.org>
Co-developed-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Co-developed-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Suggested-by: Vineet Gupta <vineetg@rivosinc.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230605110724.21391-5-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: hwprobe: Add support for probing V in RISCV_HWPROBE_KEY_IMA_EXT_0

Probing kernel support for Vector extension is available now. This only
add detection for V only. Extenions like Zvfh, Zk are not in this scope.

Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230605110724.21391-4-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Extending cpufeature.c to detect V-extension

Add V-extension into riscv_isa_ext_keys array and detect it with isa
string parsing.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Suggested-by: Vineet Gupta <vineetg@rivosinc.com>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230605110724.21391-3-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Rename __switch_to_aux() -> fpu

The name of __switch_to_aux() is not clear and rename it with the
determine function: __switch_to_fpu(). Next we could add other regs'
switch.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230605110724.21391-2-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge patch series "riscv: allow case-insensitive ISA string parsing"

Yangyu Chen <cyy@cyyself.name> says:

This patchset allows case-insensitive ISA string parsing, which is
needed in the ACPI environment. As the RISC-V Hart Capabilities Table
(RHCT) description in UEFI Forum ECR[1] shows the format of the ISA
string is defined in the RISC-V unprivileged specification[2]. However,
the RISC-V unprivileged specification defines the ISA naming strings are
case-insensitive while the current ISA string parser in the kernel only
accepts lowercase letters. In this case, the kernel should allow
case-insensitive ISA string parsing. Moreover, this reason has been
discussed in Conor's patch[3]. And I have also checked the current ISA
string parsing in the recent ACPI support patch[4] will also call
`riscv_fill_hwcap` function as DT we use now.

The original motivation for my patch v1[5] is that some SoC generators
will provide generated DT with illegal ISA string in dt-binding such as
rocket-chip, which will even cause kernel panic in some cases as I
mentioned in v1[5]. Now, the rocket-chip has been fixed in PR #3333[6].
However, when using some specific version of rocket-chip with
illegal ISA string in DT, this patchset will also work for parsing
uppercase letters correctly in DT, thus will have better compatibility.

In summary, this patch not only works for case-insensitive ISA string
parsing to meet the requirements in ECR[1] but also can be a workaround
for some specific versions of rocket-chip.

* b4-shazam-merge:
  dt-bindings: riscv: drop invalid comment about riscv,isa lower-case reasoning
  riscv: allow case-insensitive ISA string parsing

Link: https://lore.kernel.org/r/tencent_E6911C8D71F5624E432A1AFDF86804C3B509@qq.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

dt-bindings: riscv: drop invalid comment about riscv,isa lower-case reasoning

"Ease of parsing" may have been the initial argument for keeping this
string in lower-case, but parsers may have been written that expect
lower-case only.
For example, the one in released kernels currently does not behave
correctly for multi-letter extensions that begin with a capital letter.
Allowing upper-case here brings about no benefit but would break
compatibility between new devicetrees and older kernels.

Drop the comment to avoid confusing people.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Link: https://lore.kernel.org/r/tencent_3B8290DDC66D3E624132ED39C7465CDC9807@qq.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: allow case-insensitive ISA string parsing

According to RISC-V Hart Capabilities Table (RHCT) description in UEFI
Forum ECR, the format of the ISA string is defined in the RISC-V
unprivileged specification which is case-insensitive. However, the
current ISA string parser in the kernel does not support ISA strings
with uppercase letters.

This patch modifies the ISA string parser in the kernel to support
case-insensitive ISA string parsing.

Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Link: https://lore.kernel.org/r/tencent_B30EED51C7235CA1988890E5C658BE35C107@qq.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge patch series "Add basic ACPI support for RISC-V"

Sunil V L <sunilvl@ventanamicro.com> says:

This patch series enables the basic ACPI infrastructure for RISC-V.
Supporting external interrupt controllers is in progress and hence it is
tested using poll based HVC SBI console and RAM disk.

The first patch in this series is one of the patch from Jisheng's
series [1] which is not merged yet. This patch is required to support
ACPI since efi_init() which gets called before sbi_init() can enable
static branches and hits a panic.

Below are two ECRs approved by ASWG.
RINTC - https://drive.google.com/file/d/1R6k4MshhN3WTT-hwqAquu5nX6xSEqK2l/view
RHCT - https://drive.google.com/file/d/1nP3nFiH4jkPMp6COOxP6123DCZKR-tia/view

Testing:
1) Build latest Qemu

2) Build EDK2 as per instructions in
https://github.com/vlsunil/riscv-uefi-edk2-docs/wiki/RISC-V-Qemu-Virt-support

3) Build Linux after enabling SBI HVC and SBI earlycon
CONFIG_RISCV_SBI_V01=y
CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
CONFIG_HVC_RISCV_SBI=y

4) Build buildroot.

Run with below command.
qemu-system-riscv64   -nographic \
-drive file=Build/RiscVVirtQemu/RELEASE_GCC5/FV/RISCV_VIRT.fd,if=pflash,format=raw,unit=1 \
-machine virt -smp 16 -m 2G \
-kernel arch/riscv/boot/Image \
-initrd buildroot/output/images/rootfs.cpio \
-append "root=/dev/ram ro console=hvc0 earlycon=sbi"

* b4-shazam-merge:
  RISC-V: Enable ACPI in defconfig
  RISC-V: time.c: Add ACPI support for time_init()
  clocksource/timer-riscv: Add ACPI support
  clocksource/timer-riscv: Refactor riscv_timer_init_dt()
  irqchip/riscv-intc: Add ACPI support
  RISC-V: cpu: Enable cpuinfo for ACPI systems
  RISC-V: cpufeature: Add ACPI support in riscv_fill_hwcap()
  RISC-V: only iterate over possible CPUs in ISA string parser
  RISC-V: smpboot: Add ACPI support in setup_smp()
  RISC-V: smpboot: Create wrapper setup_smp()
  drivers/acpi: RISC-V: Add RHCT related code
  RISC-V: ACPI: Cache and retrieve the RINTC structure
  RISC-V: Add ACPI initialization in setup_arch()
  ACPI: processor_core: RISC-V: Enable mapping processor to the hartid
  RISC-V: Add support to build the ACPI core
  ACPI: OSL: Make should_use_kmap() 0 for RISC-V
  ACPI: tables: Print RINTC information when MADT is parsed
  crypto: hisilicon/qm: Fix to enable build with RISC-V clang
  platform/surface: Disable for RISC-V
  riscv: move sbi_init() earlier before jump_label_init()

Link: https://lore.kernel.org/r/20230515054928.2079268-1-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

MAINTAINERS: Add entry for drivers/acpi/riscv

ACPI defines few RISC-V specific tables which need
parsing code added in drivers/acpi/riscv. Add maintainer
entries for this newly created folder.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-22-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

RISC-V: Enable ACPI in defconfig

Add support to build ACPI subsystem in defconfig.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-21-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

RISC-V: time.c: Add ACPI support for time_init()

On ACPI based platforms, timer related information is
available in RHCT. Add ACPI based probe support to the
timer initialization.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-20-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

clocksource/timer-riscv: Add ACPI support

Initialize the timer driver based on RHCT table on ACPI based
platforms.

Currently, ACPI doesn't support a flag to indicate that the
timer interrupt can wake up the cpu irrespective of its
power state. It will be added in future update.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-19-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

clocksource/timer-riscv: Refactor riscv_timer_init_dt()

Refactor the timer init function such that few things can be
shared by both DT and ACPI based platforms.

Co-developed-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-18-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

irqchip/riscv-intc: Add ACPI support

Add support for initializing the RISC-V INTC driver on ACPI
platforms.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-17-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

RISC-V: cpu: Enable cpuinfo for ACPI systems

On ACPI based platforms, few details like ISA need to be read
from the ACPI table. Enable cpuinfo on ACPI based systems.

ACPI has nothing similar to DT compatible property for each CPU.
Hence, cpuinfo will not print "uarch".

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-16-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

RISC-V: cpufeature: Add ACPI support in riscv_fill_hwcap()

On ACPI based systems, the information about the hart
like ISA is provided by the RISC-V Hart Capabilities Table (RHCT).
Enable filling up hwcap structure based on the information in RHCT.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-15-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

RISC-V: only iterate over possible CPUs in ISA string parser

During boot we call riscv_of_processor_hartid() for each hart that we
add to the possible cpus list. Repeating the call again here is not
required, if we iterate over the list of possible CPUs, rather than the
list of all CPUs.

The call to of_property_read_string() for "riscv,isa" cannot fail
either, as it has previously succeeded in riscv_of_processor_hartid(),
but leaving in the error checking makes the operation of the loop more
obvious & provides leeway for future refactoring of
riscv_of_processor_hartid().

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-14-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

RISC-V: smpboot: Add ACPI support in setup_smp()

Enable SMP boot on ACPI based platforms by using the RINTC
structures in the MADT table.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-13-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

RISC-V: smpboot: Create wrapper setup_smp()

setup_smp() currently assumes DT-based platforms. To enable ACPI,
first make this a wrapper function and move existing code to
a separate DT-specific function.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-12-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

drivers/acpi: RISC-V: Add RHCT related code

RHCT is a new table defined for RISC-V to communicate the
features of the CPU to the OS. Create a new architecture folder
in drivers/acpi and add RHCT parsing code.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-11-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

RISC-V: ACPI: Cache and retrieve the RINTC structure

RINTC structures in the MADT provide mapping between the hartid
and the CPU. This is required many times even at run time like
cpuinfo. So, instead of parsing the ACPI table every time, cache
the RINTC structures and provide a function to get the correct
RINTC structure for a given cpu.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-10-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

RISC-V: Add ACPI initialization in setup_arch()

Initialize the ACPI core for RISC-V during boot.

ACPI tables and interpreter are initialized based on
the information passed from the firmware and the value of
the kernel parameter 'acpi'.

With ACPI support added for RISC-V, the kernel parameter 'acpi'
is also supported on RISC-V. Hence, update the documentation.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-9-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

ACPI: processor_core: RISC-V: Enable mapping processor to the hartid

processor_core needs arch-specific functions to map the ACPI ID
to the physical ID. In RISC-V platforms, hartid is the physical id
and RINTC structure in MADT provides this mapping. Add arch-specific
function to get this mapping from RINTC.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-8-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

RISC-V: Add support to build the ACPI core

Enable ACPI core for RISC-V after adding architecture-specific
interfaces and header files required to build the ACPI core.

1) Couple of header files are required unconditionally by the ACPI
core. Add empty acenv.h and cpu.h header files.

2) If CONFIG_PCI is enabled, a few PCI related interfaces need to
be provided by the architecture. Define dummy interfaces for now
so that build succeeds. Actual implementation will be added when
PCI support is added for ACPI along with external interrupt
controller support.

3) A few globals and memory mapping related functions specific
to the architecture need to be provided.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-7-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

ACPI: OSL: Make should_use_kmap() 0 for RISC-V

Without this, if the tables are larger than 4K,
acpi_map() will fail.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-6-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

ACPI: tables: Print RINTC information when MADT is parsed

When MADT is parsed, print RINTC information as below:

ACPI: RISC-V INTC (acpi_uid[0x0000] hart_id[0x0] enabled)
ACPI: RISC-V INTC (acpi_uid[0x0001] hart_id[0x1] enabled)
...
ACPI: RISC-V INTC (acpi_uid[0x000f] hart_id[0xf] enabled)

This debug information will be very helpful during bring up.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-5-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

crypto: hisilicon/qm: Fix to enable build with RISC-V clang

With CONFIG_ACPI enabled for RISC-V, this driver gets enabled in
allmodconfig build. However, build fails with clang and below
error is seen.

drivers/crypto/hisilicon/qm.c:627:10: error: invalid output constraint '+Q' in asm
                       "+Q" (*((char __iomem *)fun_base))
                       ^
This is expected error with clang due to the way it is designed.

To fix this issue, move arm64 assembly code under #if.

Link: https://github.com/ClangBuiltLinux/linux/issues/999
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
[sunilvl@ventanamicro.com: Moved tmp0 and tmp1 into the #if]
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/20230515054928.2079268-4-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

platform/surface: Disable for RISC-V

With CONFIG_ACPI enabled for RISC-V, this driver gets enabled
in allmodconfig build. However, RISC-V doesn't support sub-word
atomics which is used by this driver and hence allmodconfig
build will fail.

There is currently no plan to support this driver for RISC-V. So,
disable this driver for RISC-V even when ACPI is enabled.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-3-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: move sbi_init() earlier before jump_label_init()

We call jump_label_init() in setup_arch() is to use static key
mechanism earlier, but riscv jump label relies on the sbi functions,
If we enable static key before sbi_init(), the code path looks like:
  static_branch_enable()
    ..
      arch_jump_label_transform()
        patch_text_nosync()
          flush_icache_range()
            flush_icache_all()
              sbi_remote_fence_i() for CONFIG_RISCV_SBI case
                __sbi_rfence()

Since sbi isn't initialized, so NULL deference! Here is a typical
panic log:

[    0.000000] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[    0.000000] Oops [#1]
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.18.0-rc7+ #79
[    0.000000] Hardware name: riscv-virtio,qemu (DT)
[    0.000000] epc : 0x0
[    0.000000]  ra : sbi_remote_fence_i+0x1e/0x26
[    0.000000] epc : 0000000000000000 ra : ffffffff80005826 sp : ffffffff80c03d50
[    0.000000]  gp : ffffffff80ca6178 tp : ffffffff80c0ad80 t0 : 6200000000000000
[    0.000000]  t1 : 0000000000000000 t2 : 62203a6b746e6972 s0 : ffffffff80c03d60
[    0.000000]  s1 : ffffffff80001af6 a0 : 0000000000000000 a1 : 0000000000000000
[    0.000000]  a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000
[    0.000000]  a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000080200
[    0.000000]  s2 : ffffffff808b3e48 s3 : ffffffff808bf698 s4 : ffffffff80cb2818
[    0.000000]  s5 : 0000000000000001 s6 : ffffffff80c9c345 s7 : ffffffff80895aa0
[    0.000000]  s8 : 0000000000000001 s9 : 000000000000007f s10: 0000000000000000
[    0.000000]  s11: 0000000000000000 t3 : ffffffff80824d08 t4 : 0000000000000022
[    0.000000]  t5 : 000000000000003d t6 : 0000000000000000
[    0.000000] status: 0000000000000100 badaddr: 0000000000000000 cause: 000000000000000c
[    0.000000] ---[ end trace 0000000000000000 ]---
[    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
[    0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---

Fix this issue by moving sbi_init() earlier before jump_label_init()

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-2-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Linux 6.4-rc1

Merge tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git./linux/kernel/git/acme/linux

Pull perf tool updates from Arnaldo Carvalho de Melo:
 "Third version of perf tool updates, with the build problems with with
  using a 'vmlinux.h' generated from the main build fixed, and the bpf
  skeleton build disabled by default.

  Build:

   - Require libtraceevent to build, one can disable it using
     NO_LIBTRACEEVENT=1.

     It is required for tools like 'perf sched', 'perf kvm', 'perf
     trace', etc.

     libtraceevent is available in most distros so installing
     'libtraceevent-devel' should be a one-time event to continue
     building perf as usual.

     Using NO_LIBTRACEEVENT=1 produces tooling that is functional and
     sufficient for lots of users not interested in those libtraceevent
     dependent features.

   - Allow Python support in 'perf script' when libtraceevent isn't
     linked, as not all features requires it, for instance Intel PT does
     not use tracepoints.

   - Error if the python interpreter needed for jevents to work isn't
     available and NO_JEVENTS=1 isn't set, preventing a build without
     support for JSON vendor events, which is a rare but possible
     condition. The two check error messages:

        $(error ERROR: No python interpreter needed for jevents generation. Install python or build with NO_JEVENTS=1.)
        $(error ERROR: Python interpreter needed for jevents generation too old (older than 3.6). Install a newer python or build with NO_JEVENTS=1.)

   - Make libbpf 1.0 the minimum required when building with out of
     tree, distro provided libbpf.

   - Use libsdtc++'s and LLVM's libcxx's __cxa_demangle, a portable C++
     demangler, add 'perf test' entry for it.

   - Make binutils libraries opt in, as distros disable building with it
     due to licensing, they were used for C++ demangling, for instance.

   - Switch libpfm4 to opt-out rather than opt-in, if libpfm-devel (or
     equivalent) isn't installed, we'll just have a build warning:

       Makefile.config:1144: libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev

   - Add a feature test for scandirat(), that is not implemented so far
     in musl and uclibc, disabling features that need it, such as
     scanning for tracepoints in /sys/kernel/tracing/events.

  perf BPF filters:

   - New feature where BPF can be used to filter samples, for instance:

      $ sudo ./perf record -e cycles --filter 'period > 1000' true
      $ sudo ./perf script
           perf-exec 2273949 546850.708501:       5029 cycles:  ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms])
           perf-exec 2273949 546850.708508:      32409 cycles:  ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms])
           perf-exec 2273949 546850.708526:     143369 cycles:  ffffffff82b4cdbf xas_start+0x5f ([kernel.kallsyms])
           perf-exec 2273949 546850.708600:     372650 cycles:  ffffffff8286b8f7 __pagevec_lru_add+0x117 ([kernel.kallsyms])
           perf-exec 2273949 546850.708791:     482953 cycles:  ffffffff829190de __mod_memcg_lruvec_state+0x4e ([kernel.kallsyms])
                true 2273949 546850.709036:     501985 cycles:  ffffffff828add7c tlb_gather_mmu+0x4c ([kernel.kallsyms])
                true 2273949 546850.709292:     503065 cycles:      7f2446d97c03 _dl_map_object_deps+0x973 (/usr/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2)

   - In addition to 'period' (PERF_SAMPLE_PERIOD), the other
     PERF_SAMPLE_ can be used for filtering, and also some other sample
     accessible values, from tools/perf/Documentation/perf-record.txt:

        Essentially the BPF filter expression is:

        <term> <operator> <value> (("," | "||") <term> <operator> <value>)*

     The <term> can be one of:
        ip, id, tid, pid, cpu, time, addr, period, txn, weight, phys_addr,
        code_pgsz, data_pgsz, weight1, weight2, weight3, ins_lat, retire_lat,
        p_stage_cyc, mem_op, mem_lvl, mem_snoop, mem_remote, mem_lock,
        mem_dtlb, mem_blk, mem_hops

     The <operator> can be one of:
        ==, !=, >, >=, <, <=, &

     The <value> can be one of:
        <number> (for any term)
        na, load, store, pfetch, exec (for mem_op)
        l1, l2, l3, l4, cxl, io, any_cache, lfb, ram, pmem (for mem_lvl)
        na, none, hit, miss, hitm, fwd, peer (for mem_snoop)
        remote (for mem_remote)
        na, locked (for mem_locked)
        na, l1_hit, l1_miss, l2_hit, l2_miss, any_hit, any_miss, walk, fault (for mem_dtlb)
        na, by_data, by_addr (for mem_blk)
        hops0, hops1, hops2, hops3 (for mem_hops)

  perf lock contention:

   - Show lock type with address.

   - Track and show mmap_lock, siglock and per-cpu rq_lock with address.
     This is done for mmap_lock by following the current->mm pointer:

      $ sudo ./perf lock con -abl -- sleep 10
       contended   total wait     max wait     avg wait            address   symbol
       ...
           16344    312.30 ms      2.22 ms     19.11 us   ffff8cc702595640
           17686    310.08 ms      1.49 ms     17.53 us   ffff8cc7025952c0
               3     84.14 ms     45.79 ms     28.05 ms   ffff8cc78114c478   mmap_lock
            3557     76.80 ms     68.75 us     21.59 us   ffff8cc77ca3af58
               1     68.27 ms     68.27 ms     68.27 ms   ffff8cda745dfd70
               9     54.53 ms      7.96 ms      6.06 ms   ffff8cc7642a48b8   mmap_lock
           14629     44.01 ms     60.00 us      3.01 us   ffff8cc7625f9ca0
            3481     42.63 ms    140.71 us     12.24 us   ffffffff937906ac   vmap_area_lock
           16194     38.73 ms     42.15 us      2.39 us   ffff8cd397cbc560
              11     38.44 ms     10.39 ms      3.49 ms   ffff8ccd6d12fbb8   mmap_lock
               1      5.43 ms      5.43 ms      5.43 ms   ffff8cd70018f0d8
            1674      5.38 ms    422.93 us      3.21 us   ffffffff92e06080   tasklist_lock
             581      4.51 ms    130.68 us      7.75 us   ffff8cc9b1259058
               5      3.52 ms      1.27 ms    703.23 us   ffff8cc754510070
             112      3.47 ms     56.47 us     31.02 us   ffff8ccee38b3120
             381      3.31 ms     73.44 us      8.69 us   ffffffff93790690   purge_vmap_area_lock
             255      3.19 ms     36.35 us     12.49 us   ffff8d053ce30c80

   - Update default map size to 16384.

   - Allocate single letter option -M for --map-nr-entries, as it is
     proving being frequently used.

   - Fix struct rq lock access for older kernels with BPF's CO-RE
     (Compile once, run everywhere).

   - Fix problems found with MSAn.

  perf report/top:

   - Add inline information when using --call-graph=fp or lbr, as was
     already done to the --call-graph=dwarf callchain mode.

   - Improve the 'srcfile' sort key performance by really using an
     optimization introduced in 6.2 for the 'srcline' sort key that
     avoids calling addr2line for comparision with each sample.

  perf sched:

   - Make 'perf sched latency/map/replay' to use "sched:sched_waking"
     instead of "sched:sched_waking", consistent with 'perf record'
     since d566a9c2d482 ("perf sched: Prefer sched_waking event when it
     exists").

  perf ftrace:

   - Make system wide the default target for latency subcommand, run the
     following command then generate some network traffic and press
     control+C:

       # perf ftrace latency -T __kfree_skb
     ^C
         DURATION     |      COUNT | GRAPH                                          |
          0 - 1    us |         27 | #############                                  |
          1 - 2    us |         22 | ###########                                    |
          2 - 4    us |          8 | ####                                           |
          4 - 8    us |          5 | ##                                             |
          8 - 16   us |         24 | ############                                   |
         16 - 32   us |          2 | #                                              |
         32 - 64   us |          1 |                                                |
         64 - 128  us |          0 |                                                |
        128 - 256  us |          0 |                                                |
        256 - 512  us |          0 |                                                |
        512 - 1024 us |          0 |                                                |
          1 - 2    ms |          0 |                                                |
          2 - 4    ms |          0 |                                                |
          4 - 8    ms |          0 |                                                |
          8 - 16   ms |          0 |                                                |
         16 - 32   ms |          0 |                                                |
         32 - 64   ms |          0 |                                                |
         64 - 128  ms |          0 |                                                |
        128 - 256  ms |          0 |                                                |
        256 - 512  ms |          0 |                                                |
        512 - 1024 ms |          0 |                                                |
          1 - ...   s |          0 |                                                |
       #

  perf top:

   - Add --branch-history (LBR: Last Branch Record) option, just like
     already available for 'perf record'.

   - Fix segfault in thread__comm_len() where thread->comm was being
     used outside thread->comm_lock.

  perf annotate:

   - Allow configuring objdump and addr2line in ~/.perfconfig., so that
     you can use alternative binaries, such as llvm's.

  perf kvm:

   - Add TUI mode for 'perf kvm stat report'.

  Reference counting:

   - Add reference count checking infrastructure to check for use after
     free, done to the 'cpumap', 'namespaces', 'maps' and 'map' structs,
     more to come.

     To build with it use -DREFCNT_CHECKING=1 in the make command line
     to build tools/perf. Documented at:

       https://perf.wiki.kernel.org/index.php/Reference_Count_Checking

   - The above caught, for instance, fix, present in this series:

        - Fix maps use after put in 'perf test "Share thread maps"':

          'maps' is copied from leader, but the leader is put on line 79
          and then 'maps' is used to read the reference count below - so
          a use after put, with the put of maps happening within
          thread__put.

     Fixed by reversing the order of puts so that the leader is put
     last.

   - Also several fixes were made to places where reference counts were
     not being held.

   - Make this one of the tests in 'make -C tools/perf build-test' to
     regularly build test it and to make sure no direct access to the
     reference counted structs are made, doing that via accessors to
     check the validity of the struct pointer.

  ARM64:

   - Fix 'perf report' segfault when filtering coresight traces by
     sparse lists of CPUs.

   - Add support for 'simd' as a sort field for 'perf report', to show
     ARM's NEON SIMD's predicate flags: "partial" and "empty".

  arm64 vendor events:

   - Add N1 metrics.

  Intel vendor events:

   - Add graniterapids, grandridge and sierraforrest events.

   - Refresh events for: alderlake, aldernaken, broadwell, broadwellde,
     broadwellx, cascadelakx, haswell, haswellx, icelake, icelakex,
     jaketown, meteorlake, knightslanding, sandybridge, sapphirerapids,
     silvermont, skylake, tigerlake and westmereep-dp

   - Refresh metrics for alderlake-n, broadwell, broadwellde,
     broadwellx, haswell, haswellx, icelakex, ivybridge, ivytown and
     skylakex.

  perf stat:

   - Implement --topdown using JSON metrics.

   - Add TopdownL1 JSON metric as a default if present, but disable it
     for now for some Intel hybrid architectures, a series of patches
     addressing this is being reviewed and will be submitted for v6.5.

   - Use metrics for --smi-cost.

   - Update topdown documentation.

  Vendor events (JSON) infrastructure:

   - Add support for computing and printing metric threshold values. For
     instance, here is one found in thesapphirerapids json file:

       {
           "BriefDescription": "Percentage of cycles spent in System Management Interrupts.",
           "MetricExpr": "((msr@aperf@ - cycles) / msr@aperf@ if msr@smi@ > 0 else 0)",
           "MetricGroup": "smi",
           "MetricName": "smi_cycles",
           "MetricThreshold": "smi_cycles > 0.1",
           "ScaleUnit": "100%"
       },

   - Test parsing metric thresholds with the fake PMU in 'perf test
     pmu-events'.

   - Support for printing metric thresholds in 'perf list'.

   - Add --metric-no-threshold option to 'perf stat'.

   - Add rand (reverse and) and has_pmem (optane memory) support to
     metrics.

   - Sort list of input files to avoid depending on the order from
     readdir() helping in obtaining reproducible builds.

  S/390:

   - Add common metrics: - CPI (cycles per instruction), prbstate (ratio
     of instructions executed in problem state compared to total number
     of instructions), l1mp (Level one instruction and data cache misses
     per 100 instructions).

   - Add cache metrics for z13, z14, z15 and z16.

   - Add metric for TLB and cache.

  ARM:

   - Add raw decoding for SPE (Statistical Profiling Extension) v1.3 MTE
     (Memory Tagging Extension) and MOPS (Memory Operations) load/store.

  Intel PT hardware tracing:

   - Add event type names UINTR (User interrupt delivered) and UIRET
     (Exiting from user interrupt routine), documented in table 32-50
     "CFE Packet Type and Vector Fields Details" in the Intel Processor
     Trace chapter of The Intel SDM Volume 3 version 078.

   - Add support for new branch instructions ERETS and ERETU.

   - Fix CYC timestamps after standalone CBR

  ARM CoreSight hardware tracing:

   - Allow user to override timestamp and contextid settings.

   - Fix segfault in dso lookup.

   - Fix timeless decode mode detection.

   - Add separate decode paths for timeless and per-thread modes.

  auxtrace:

   - Fix address filter entire kernel size.

  Miscellaneous:

   - Fix use-after-free and unaligned bugs in the PLT handling routines.

   - Use zfree() to reduce chances of use after free.

   - Add missing 0x prefix for addresses printed in hexadecimal in 'perf
     probe'.

   - Suppress massive unsupported target platform errors in the unwind
     code.

   - Fix return incorrect build_id size in elf_read_build_id().

   - Fix 'perf scripts intel-pt-events.py' IPC output for Python 2 .

   - Add missing new parameter in kfree_skb tracepoint to the python
     scripts using it.

   - Add 'perf bench syscall fork' benchmark.

   - Add support for printing PERF_MEM_LVLNUM_UNC (Uncached access) in
     'perf mem'.

   - Fix wrong size expectation for perf test 'Setup struct
     perf_event_attr' caused by the patch adding
     perf_event_attr::config3.

   - Fix some spelling mistakes"

* tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (365 commits)
  Revert "perf build: Make BUILD_BPF_SKEL default, rename to NO_BPF_SKEL"
  Revert "perf build: Warn for BPF skeletons if endian mismatches"
  perf metrics: Fix SEGV with --for-each-cgroup
  perf bpf skels: Stop using vmlinux.h generated from BTF, use subset of used structs + CO-RE
  perf stat: Separate bperf from bpf_profiler
  perf test record+probe_libc_inet_pton: Fix call chain match on x86_64
  perf test record+probe_libc_inet_pton: Fix call chain match on s390
  perf tracepoint: Fix memory leak in is_valid_tracepoint()
  perf cs-etm: Add fix for coresight trace for any range of CPUs
  perf build: Fix unescaped # in perf build-test
  perf unwind: Suppress massive unsupported target platform errors
  perf script: Add new parameter in kfree_skb tracepoint to the python scripts using it
  perf script: Print raw ip instead of binary offset for callchain
  perf symbols: Fix return incorrect build_id size in elf_read_build_id()
  perf list: Modify the warning message about scandirat(3)
  perf list: Fix memory leaks in print_tracepoint_events()
  perf lock contention: Rework offset calculation with BPF CO-RE
  perf lock contention: Fix struct rq lock access
  perf stat: Disable TopdownL1 on hybrid
  perf stat: Avoid SEGV on counter->name
  ...

Merge tag 'core-debugobjects-2023-05-06' of git://git./linux/kernel/git/tip/tip

Pull debugobjects fix from Thomas Gleixner:
 "A single fix for debugobjects:

  The recent fix to ensure atomicity of lookup and allocation
  inadvertently broke the pool refill mechanism, so that debugobject
  OOMs now in certain situations. The reason is that the functions which
  got updated no longer invoke debug_objecs_init(), which is now the
  only place to care about refilling the tracking object pool.

  Restore the original behaviour by adding explicit refill opportunities
  to those places"

* tag 'core-debugobjects-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  debugobject: Ensure pool refill (again)

Merge tag 'v6.4-p2' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:

 - A long-standing bug in crypto_engine

 - A buggy but harmless check in the sun8i-ss driver

 - A regression in the CRYPTO_USER interface

* tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: api - Fix CRYPTO_USER checks for report function
  crypto: engine - fix crypto_queue backlog handling
  crypto: sun8i-ss - Fix a test in sun8i_ss_setup_ivs()

Merge tag '6.4-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
 "smb3 client fixes, mostly DFS or reconnect related:

   - Two DFS connection sharing fixes

   - DFS refresh fix

   - Reconnect fix

   - Two potential use after free fixes

   - Also print prefix patch in mount debug msg

   - Two small cleanup fixes"

* tag '6.4-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Remove unneeded semicolon
  cifs: fix sharing of DFS connections
  cifs: avoid potential races when handling multiple dfs tcons
  cifs: protect access of TCP_Server_Info::{origin,leaf}_fullpath
  cifs: fix potential race when tree connecting ipc
  cifs: fix potential use-after-free bugs in TCP_Server_Info::hostname
  cifs: print smb3_fs_context::source when mounting
  cifs: protect session status check in smb2_reconnect()
  SMB3.1.1: correct definition for app_instance_id create contexts

Merge tag 'clk-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
 "A couple more patches that would be good to get into -rc1:

   - Revert an i.MX patch that's causing video failures because division
     math goes sideways

   - Fix a clang + W=1 build isue where FIELD_PREP() is taking a 32-bit
     variable instead of the usual u64 type

   - Fix a Kconfig bug in the StarFive JH7110 clk config that selects a
     reset controller when it can't be selected"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: starfive: Fix RESET_STARFIVE_JH7110 can't be selected in a specified case
  clk: sp7021: Adjust width of _m in HWM_FIELD_PREP()
  Revert "clk: imx: composite-8m: Add support to determine_rate"

Merge tag 'mailbox-v6.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration

Pull mailbox updates from Jassi Brar:

 - mailbox api: allow direct registration to a channel and convert omap
   and pcc to use mbox_bind_client

 - omap and hi6220 : use of_property_read_bool

 - test: fix double-free and use spinlock header

 - rockchip and bcm-pdc: drop of_match_ptr

 - mpfs: change config symbol

 - mediatek gce: support MT6795

 - qcom apcs: consolidate of_device_id and support IPQ9574

* tag 'mailbox-v6.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  dt-bindings: mailbox: qcom: add compatible for IPQ9574 SoC
  mailbox: qcom-apcs-ipc: do not grow the of_device_id
  dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks for few variants
  dt-bindings: mailbox: mediatek,gce-mailbox: Add support for MT6795
  mailbox: mpfs: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE
  mailbox: bcm-pdc: drop of_match_ptr for ID table
  mailbox: rockchip: drop of_match_ptr for ID table
  mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write()
  mailbox: mailbox-test: Explicitly include header for spinlock support
  mailbox: Use of_property_read_bool() for boolean properties
  mailbox: pcc: Use mbox_bind_client
  mailbox: omap: Use mbox_bind_client
  mailbox: Allow direct registration to a channel

Merge tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux

Pull more io_uring updates from Jens Axboe:
 "Nothing major in here, just two different parts:

   - A small series from Breno that enables passing the full SQE down
     for ->uring_cmd().

     This is a prerequisite for enabling full network socket operations.
     Queued up a bit late because of some stylistic concerns that got
     resolved, would be nice to have this in 6.4-rc1 so the dependent
     work will be easier to handle for 6.5.

   - Fix for the huge page coalescing, which was a regression introduced
     in the 6.3 kernel release (Tobias)"

* tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux:
  io_uring: Remove unnecessary BUILD_BUG_ON
  io_uring: Pass whole sqe to commands
  io_uring: Create a helper to return the SQE size
  io_uring/rsrc: check for nonconsecutive pages

Revert "perf build: Make BUILD_BPF_SKEL default, rename to NO_BPF_SKEL"

This reverts commit a980755beb5aca9002e1c95ba519b83a44242b5b.

We need to better polish building with BPF skels, so revert back to
making it an experimental feature that has to be explicitely enabled
using BUILD_BPF_SKEL=1.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Revert "perf build: Warn for BPF skeletons if endian mismatches"

This reverts commit 51924ae69eea5bc90b5da525fbcf4bbd5f8551b3.

We need to better polish building with BPF skels, so revert back to
making it an experimental feature that has to be explicitely enabled
using BUILD_BPF_SKEL=1.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'mm-stable-2023-05-06-10-49' of git://git./linux/kernel/git/akpm/mm

Pull dmapool updates - again - from Andrew Morton:
 "Reinstate the dmapool changes which were accidentally removed by a
  mishap on the last commit in the previous attempt at the series"

Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup").

[ The whole old series: def8574308ed..2d55c16c0c54 results in an empty
  diff because that last commit ended up being just a revert of all that
  came everything before it.     - Linus ]

* tag 'mm-stable-2023-05-06-10-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  dmapool: link blocks across pages
  dmapool: don't memset on free twice
  dmapool: simplify freeing
  dmapool: consolidate page initialization
  dmapool: rearrange page alloc failure handling
  dmapool: move debug code to own functions
  dmapool: speedup DMAPOOL_DEBUG with init_on_alloc
  dmapool: cleanup integer types
  dmapool: use sysfs_emit() instead of scnprintf()
  dmapool: remove checks for dev == NULL

Merge tag 'mm-hotfixes-stable-2023-05-06-10-45' of git://git./linux/kernel/git/akpm/mm

Pull hotfixes from Andrew Morton:
 "Five hotfixes.

  Three are cc:stable, two pertain to merge window changes"

* tag 'mm-hotfixes-stable-2023-05-06-10-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  afs: fix the afs_dir_get_folio return value
  nilfs2: do not write dirty data after degenerating to read-only
  mm: do not reclaim private data from pinned page
  nilfs2: fix infinite loop in nilfs_mdt_get_block()
  mm/mmap/vma_merge: always check invariants

dmapool: link blocks across pages

The allocated dmapool pages are never freed for the lifetime of the pool.
There is no need for the two level list+stack lookup for finding a free
block since nothing is ever removed from the list.  Just use a simple
stack, reducing time complexity to constant.

The implementation inserts the stack linking elements and the dma handle
of the block within itself when freed.  This means the smallest possible
dmapool block is increased to at most 16 bytes to accommodate these
fields, but there are no exisiting users requesting a dma pool smaller
than that anyway.

Removing the list has a significant change in performance. Using the
kernel's micro-benchmarking self test:

Before:

  # modprobe dmapool_test
  dmapool test: size:16   blocks:8192   time:57282
  dmapool test: size:64   blocks:8192   time:172562
  dmapool test: size:256  blocks:8192   time:789247
  dmapool test: size:1024 blocks:2048   time:371823
  dmapool test: size:4096 blocks:1024   time:362237

After:

  # modprobe dmapool_test
  dmapool test: size:16   blocks:8192   time:24997
  dmapool test: size:64   blocks:8192   time:26584
  dmapool test: size:256  blocks:8192   time:33542
  dmapool test: size:1024 blocks:2048   time:9022
  dmapool test: size:4096 blocks:1024   time:6045

The module test allocates quite a few blocks that may not accurately
represent how these pools are used in real life.  For a more marco level
benchmark, running fio high-depth + high-batched on nvme, this patch shows
submission and completion latency reduced by ~100usec each, 1% IOPs
improvement, and perf record's time spent in dma_pool_alloc/free were
reduced by half.

[kbusch@kernel.org: push new blocks in ascending order]
Link: https://lkml.kernel.org/r/20230221165400.1595247-1-kbusch@meta.com
Link: https://lkml.kernel.org/r/20230126215125.4069751-12-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

dmapool: don't memset on free twice

If debug is enabled, dmapool will poison the range, so no need to clear it
to 0 immediately before writing over it.

Link: https://lkml.kernel.org/r/20230126215125.4069751-11-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

dmapool: simplify freeing

The actions for busy and not busy are mostly the same, so combine these
and remove the unnecessary function.  Also, the pool is about to be freed
so there's no need to poison the page data since we only check for poison
on alloc, which can't be done on a freed pool.

Link: https://lkml.kernel.org/r/20230126215125.4069751-10-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

dmapool: consolidate page initialization

Various fields of the dma pool are set in different places. Move it all
to one function.

Link: https://lkml.kernel.org/r/20230126215125.4069751-9-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

dmapool: rearrange page alloc failure handling

Handle the error in a condition so the good path can be in the normal
flow.

Link: https://lkml.kernel.org/r/20230126215125.4069751-8-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

dmapool: move debug code to own functions

Clean up the normal path by moving the debug code outside it.

Link: https://lkml.kernel.org/r/20230126215125.4069751-7-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

dmapool: speedup DMAPOOL_DEBUG with init_on_alloc

Avoid double-memset of the same allocated memory in dma_pool_alloc() when
both DMAPOOL_DEBUG is enabled and init_on_alloc=1.

Link: https://lkml.kernel.org/r/20230126215125.4069751-6-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

dmapool: cleanup integer types

To represent the size of a single allocation, dmapool currently uses
'unsigned int' in some places and 'size_t' in other places.  Standardize
on 'unsigned int' to reduce overhead, but use 'size_t' when counting all
the blocks in the entire pool.

Link: https://lkml.kernel.org/r/20230126215125.4069751-5-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

dmapool: use sysfs_emit() instead of scnprintf()

Use sysfs_emit instead of scnprintf, snprintf or sprintf.

Link: https://lkml.kernel.org/r/20230126215125.4069751-4-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

dmapool: remove checks for dev == NULL

dmapool originally tried to support pools without a device because
dma_alloc_coherent() supports allocations without a device.  But nobody
ended up using dma pools without a device, and trying to do so will result
in an oops.  So remove the checks for pool->dev == NULL since they are
unneeded bloat.

[kbusch@kernel.org: add check for null dev on create]
Link: https://lkml.kernel.org/r/20230126215125.4069751-3-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

nfs: fix mis-merged __filemap_get_folio() error check

Fix another case of an incorrect check for the returned 'folio' value
from __filemap_get_folio().

The failure case used to return NULL, but was changed by commit
66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio").

But in the meantime, commit ec108d3cc766 ("NFS: Convert readdir page
array functions to use a folio") added a new user of that function.

And my merge of the two did not fix this up correctly.

The ext4 merge had the same issue, but that one had been caught in
linux-next and got properly fixed while merging.

Fixes: 0127f25b5dfc ("Merge tag 'nfs-for-6.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs")
Cc: Anna Schumaker <anna@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

afs: fix the afs_dir_get_folio return value

Keep returning NULL on failure instead of letting an ERR_PTR escape to
callers that don't expect it.

Link: https://lkml.kernel.org/r/20230503154526.1223095-2-hch@lst.de
Fixes: 66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: David Howells <dhowells@redhat.com>
Tested-by: David Howells <dhowells@redhat.com>
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

nilfs2: do not write dirty data after degenerating to read-only

According to syzbot's report, mark_buffer_dirty() called from
nilfs_segctor_do_construct() outputs a warning with some patterns after
nilfs2 detects metadata corruption and degrades to read-only mode.

After such read-only degeneration, page cache data may be cleared through
nilfs_clear_dirty_page() which may also clear the uptodate flag for their
buffer heads.  However, even after the degeneration, log writes are still
performed by unmount processing etc., which causes mark_buffer_dirty() to
be called for buffer heads without the "uptodate" flag and causes the
warning.

Since any writes should not be done to a read-only file system in the
first place, this fixes the warning in mark_buffer_dirty() by letting
nilfs_segctor_do_construct() abort early if in read-only mode.

This also changes the retry check of nilfs_segctor_write_out() to avoid
unnecessary log write retries if it detects -EROFS that
nilfs_segctor_do_construct() returned.

Link: https://lkml.kernel.org/r/20230427011526.13457-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+2af3bc9585be7f23f290@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=2af3bc9585be7f23f290
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: do not reclaim private data from pinned page

If the page is pinned, there's no point in trying to reclaim it.
Furthermore if the page is from the page cache we don't want to reclaim
fs-private data from the page because the pinning process may be writing
to the page at any time and reclaiming fs private info on a dirty page can
upset the filesystem (see link below).

Link: https://lore.kernel.org/linux-mm/20180103100430.GE4911@quack2.suse.cz
Link: https://lkml.kernel.org/r/20230428124140.30166-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

nilfs2: fix infinite loop in nilfs_mdt_get_block()

If the disk image that nilfs2 mounts is corrupted and a virtual block
address obtained by block lookup for a metadata file is invalid,
nilfs_bmap_lookup_at_level() may return the same internal return code as
-ENOENT, meaning the block does not exist in the metadata file.

This duplication of return codes confuses nilfs_mdt_get_block(), causing
it to read and create a metadata block indefinitely.

In particular, if this happens to the inode metadata file, ifile,
semaphore i_rwsem can be left held, causing task hangs in lock_mount.

Fix this issue by making nilfs_bmap_lookup_at_level() treat virtual block
address translation failures with -ENOENT as metadata corruption instead
of returning the error code.

Link: https://lkml.kernel.org/r/20230430193046.6769-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+221d75710bde87fa0e97@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=221d75710bde87fa0e97
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mmap/vma_merge: always check invariants

We may still have inconsistent input parameters even if we choose not to
merge and the vma_merge() invariant checks are useful for checking this
with no production runtime cost (these are only relevant when
CONFIG_DEBUG_VM is specified).

Therefore, perform these checks regardless of whether we merge.

This is relevant, as a recent issue (addressed in commit "mm/mempolicy:
Correctly update prev when policy is equal on mbind") in the mbind logic
was only picked up in the 6.2.y stable branch where these assertions are
performed prior to determining mergeability.

Had this remained the same in mainline this issue may have been picked up
faster, so moving forward let's always check them.

Link: https://lkml.kernel.org/r/df548a6ae3fa135eec3b446eb3dae8eb4227da97.1682885809.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

filemap: Handle error return from __filemap_get_folio()

Smatch reports that filemap_fault() was missed in the conversion of
__filemap_get_folio() error returns from NULL to ERR_PTR.

Fixes: 66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Reported-by: syzbot+48011b86c8ea329af1b9@syzkaller.appspotmail.com
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
 "Six late arriving patches for the merge window. Five are minor
  assorted fixes and updates.

  The IPR driver change removes SATA support, which will now allow a
  major cleanup in the ATA subsystem because it was the only driver
  still using the old attachment mechanism. The driver is only used on
  power systems and SATA was used to support a DVD device, which has
  long been moved to a different hba. IBM chose this route instead of
  porting ipr to the newer SATA interfaces"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qedi: Fix use after free bug in qedi_remove()
  scsi: ufs: core: mcq: Fix &hwq->cq_lock deadlock issue
  scsi: ipr: Remove several unused variables
  scsi: pm80xx: Log device registration
  scsi: ipr: Remove SATA support
  scsi: scsi_debug: Abort commands from scsi_debug_device_reset()

Merge tag 'for-6.4/block-2023-05-06' of git://git.kernel.dk/linux

Pull more block updates from Jens Axboe:

 - MD pull request via Song:
      - Improve raid5 sequential IO performance on spinning disks, which
        fixes a regression since v6.0 (Jan Kara)
      - Fix bitmap offset types, which fixes an issue introduced in this
        merge window (Jonathan Derrick)

 - Cleanup of hweight type used for cgroup writeback (Maxim)

 - Fix a regression with the "has_submit_bio" changes across partitions
   (Ming)

 - Cleanup of QUEUE_FLAG_ADD_RANDOM clearing.

   We used to set this flag on queues non blk-mq queues, and hence some
   drivers clear it unconditionally. Since all of these have since been
   converted to true blk-mq drivers, drop the useless clear as the bit
   is not set (Chaitanya)

 - Fix the flags being set in a bio for a flush for drbd (Christoph)

 - Cleanup and deduplication of the code handling setting block device
   capacity (Damien)

 - Fix for ublk handling IO timeouts (Ming)

 - Fix for a regression in blk-cgroup teardown (Tao)

 - NBD documentation and code fixes (Eric)

 - Convert blk-integrity to using device_attributes rather than a second
   kobject to manage lifetimes (Thomas)

* tag 'for-6.4/block-2023-05-06' of git://git.kernel.dk/linux:
  ublk: add timeout handler
  drbd: correctly submit flush bio on barrier
  mailmap: add mailmap entries for Jens Axboe
  block: Skip destroyed blkg when restart in blkg_destroy_all()
  writeback: fix call of incorrect macro
  md: Fix bitmap offset type in sb writer
  md/raid5: Improve performance for sequential IO
  docs nbd: userspace NBD now favors github over sourceforge
  block nbd: use req.cookie instead of req.handle
  uapi nbd: add cookie alias to handle
  uapi nbd: improve doc links to userspace spec
  blk-integrity: register sysfs attributes on struct device
  blk-integrity: convert to struct device_attribute
  blk-integrity: use sysfs_emit
  block/drivers: remove dead clear of random flag
  block: sync part's ->bd_has_submit_bio with disk's
  block: Cleanup set_capacity()/bdev_set_nr_sectors()

Merge tag 'pipe-nonblock-2023-05-06' of git://git.kernel.dk/linux

Pull nonblocking pipe io_uring support from Jens Axboe:
 "Here's the revised edition of the FMODE_NOWAIT support for pipes, in
  which we just flag it as such supporting FMODE_NOWAIT unconditionally,
  but clear it if we ever end up using splice/vmsplice on the pipe.

  The pipe read/write side is perfectly fine for nonblocking IO, however
  splice and vmsplice can potentially wait for IO with the pipe lock
  held"

* tag 'pipe-nonblock-2023-05-06' of git://git.kernel.dk/linux:
  pipe: set FMODE_NOWAIT on pipes
  splice: clear FMODE_NOWAIT on file if splice/vmsplice is used

Merge tag 'sound-fix-6.4-rc1' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "A collection of small fixes for rc1.

  The only (LOC-wise) dominant change was ASoC Qualcomm fix, but most of
  it was merely a code shuffling.

  Another significant change here is for ALSA PCM core; it received a
  revert and a series of fixes for PCM auto-silencing where it caused a
  regression in the previous PR for rc1.

  Others are all small: ASoC Intel fixes, various quirks for ASoC AMD,
  HD-audio and USB-audio, the continued legacy emu10k1 code cleanup, and
  some documentation updates"

* tag 'sound-fix-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
  ALSA: pcm: use exit controlled loop in snd_pcm_playback_silence()
  ALSA: pcm: simplify top-up mode init in snd_pcm_playback_silence()
  ALSA: pcm: playback silence - move silence variable updates to separate function
  ALSA: pcm: playback silence - remove extra code
  ALSA: pcm: fix playback silence - correct incremental silencing
  ALSA: pcm: fix playback silence - use the actual new_hw_ptr for the threshold mode
  ALSA: pcm: Revert "ALSA: pcm: rewrite snd_pcm_playback_silence()"
  ALSA: hda/realtek: Fix mute and micmute LEDs for an HP laptop
  ALSA: caiaq: input: Add error handling for unsupported input methods in `snd_usb_caiaq_input_init`
  ALSA: usb-audio: Add quirk for Pioneer DDJ-800
  ALSA: hda/realtek: support HP Pavilion Aero 13-be0xxx Mute LED
  ASoC: Intel: soc-acpi-cht: Add quirk for Nextbook Ares 8A tablet
  ASoC: amd: yc: Add Asus VivoBook Pro 14 OLED M6400RC to the quirks list for acp6x
  ASoC: codecs: wcd938x: fix accessing regmap on unattached devices
  ALSA: docs: Fix code block indentation in ALSA driver example
  ALSA: docs: Extend module parameters description
  ALSA: hda/realtek: Add quirk for ASUS UM3402YAR using CS35L41
  ALSA: emu10k1: use more existing defines instead of open-coded numbers
  ASoC: amd: yc: Add ASUS M3402RA into DMI table
  ALSA: hda/realtek: Add quirk for ThinkPad P1 Gen 6
  ...

Merge tag 'regulator-fix-v6.4' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "A trivial typo fix that came in during the merge window"

* tag 'regulator-fix-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: consumer.rst: fix 'regulator_enable' typo.

Merge tag '6.4-rc-ksmbd-server-fixes-part2' of git://git.samba.org/ksmbd

Pull ksmbd server fixes from Steve French:
 "Ten ksmbd server fixes, including some important security fixes:

   - Two use after free fixes

   - Fix RCU callback race

   - Deadlock fix

   - Three patches to prevent session setup attacks

   - Prevent guest users from establishing multichannel sessions

   - Fix null pointer dereference in query FS info

   - Memleak fix"

* tag '6.4-rc-ksmbd-server-fixes-part2' of git://git.samba.org/ksmbd:
  ksmbd: call rcu_barrier() in ksmbd_server_exit()
  ksmbd: fix racy issue under cocurrent smb2 tree disconnect
  ksmbd: fix racy issue from smb2 close and logoff with multichannel
  ksmbd: not allow guest user on multichannel
  ksmbd: fix deadlock in ksmbd_find_crypto_ctx()
  ksmbd: block asynchronous requests when making a delay on session setup
  ksmbd: destroy expired sessions
  ksmbd: fix racy issue from session setup and logoff
  ksmbd: fix NULL pointer dereference in smb2_get_info_filesystem()
  ksmbd: fix memleak in session setup

Merge tag 'net-6.4-rc1' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter.

  Current release - regressions:

   - sched: act_pedit: free pedit keys on bail from offset check

  Current release - new code bugs:

   - pds_core:
      - Kconfig fixes (DEBUGFS and AUXILIARY_BUS)
      - fix mutex double unlock in error path

  Previous releases - regressions:

   - sched: cls_api: remove block_cb from driver_list before freeing

   - nf_tables: fix ct untracked match breakage

   - eth: mtk_eth_soc: drop generic vlan rx offload

   - sched: flower: fix error handler on replace

  Previous releases - always broken:

   - tcp: fix skb_copy_ubufs() vs BIG TCP

   - ipv6: fix skb hash for some RST packets

   - af_packet: don't send zero-byte data in packet_sendmsg_spkt()

   - rxrpc: timeout handling fixes after moving client call connection
     to the I/O thread

   - ixgbe: fix panic during XDP_TX with > 64 CPUs

   - igc: RMW the SRRCTL register to prevent losing timestamp config

   - dsa: mt7530: fix corrupt frames using TRGMII on 40 MHz XTAL MT7621

   - r8152:
      - fix flow control issue of RTL8156A
      - fix the poor throughput for 2.5G devices
      - move setting r8153b_rx_agg_chg_indicate() to fix coalescing
      - enable autosuspend

   - ncsi: clear Tx enable mode when handling a Config required AEN

   - octeontx2-pf: macsec: fixes for CN10KB ASIC rev

  Misc:

   - 9p: remove INET dependency"

* tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
  net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()
  pds_core: fix mutex double unlock in error path
  net/sched: flower: fix error handler on replace
  Revert "net/sched: flower: Fix wrong handle assignment during filter change"
  net/sched: flower: fix filter idr initialization
  net: fec: correct the counting of XDP sent frames
  bonding: add xdp_features support
  net: enetc: check the index of the SFI rather than the handle
  sfc: Add back mailing list
  virtio_net: suppress cpu stall when free_unused_bufs
  ice: block LAN in case of VF to VF offload
  net: dsa: mt7530: fix network connectivity with multiple CPU ports
  net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621
  9p: Remove INET dependency
  netfilter: nf_tables: fix ct untracked match breakage
  af_packet: Don't send zero-byte data in packet_sendmsg_spkt().
  igc: read before write to SRRCTL register
  pds_core: add AUXILIARY_BUS and NET_DEVLINK to Kconfig
  pds_core: remove CONFIG_DEBUG_FS from makefile
  ionic: catch failure from devlink_alloc
  ...

Merge tag 'i2c-for-6.4-rc1-part2' of git://git./linux/kernel/git/wsa/linux

Pull more i2c updates from Wolfram Sang:
 "Some more driver bugfixes and a DT binding conversion"

* tag 'i2c-for-6.4-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  dt-bindings: i2c: brcm,kona-i2c: convert to YAML
  i2c: gxp: fix build failure without CONFIG_I2C_SLAVE
  i2c: imx-lpi2c: avoid taking clk_prepare mutex in PM callbacks
  i2c: omap: Fix standard mode false ACK readings
  i2c: tegra: Fix PEC support for SMBUS block read

s390: remove the unneeded select GCC12_NO_ARRAY_BOUNDS

Commit 0da6e5fd6c37 ("gcc: disable '-Warray-bounds' for gcc-13 too") makes
config GCC11_NO_ARRAY_BOUNDS to be for disabling -Warray-bounds in any gcc
version 11 and upwards, and with that, removes the GCC12_NO_ARRAY_BOUNDS
config as it is now covered by the semantics of GCC11_NO_ARRAY_BOUNDS.

As GCC11_NO_ARRAY_BOUNDS is yes by default, there is no need for the s390
architecture to explicitly select GCC11_NO_ARRAY_BOUNDS. Hence, the select
GCC12_NO_ARRAY_BOUNDS in arch/s390/Kconfig can simply be dropped.

Remove the unneeded "select GCC12_NO_ARRAY_BOUNDS".

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

perf metrics: Fix SEGV with --for-each-cgroup

Ensure the metric threshold is copied correctly or else a use of
uninitialized memory happens.

Fixes: d0a3052f6faefffc ("perf metric: Compute and print threshold values")
Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230505204119.3443491-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf bpf skels: Stop using vmlinux.h generated from BTF, use subset of used structs + CO-RE

Linus reported a build break due to using a vmlinux without a BTF elf
section to generate the vmlinux.h header with bpftool for use in the BPF
tools in tools/perf/util/bpf_skel/*.bpf.c.

Instead add a vmlinux.h file with the structs needed with the fields the
tools need, marking the structs with __attribute__((preserve_access_index)),
so that libbpf's CO-RE code can fixup the struct field offsets.

In some cases the vmlinux.h file that was being generated by bpftool
from the kernel BTF information was not needed at all, just including
linux/bpf.h, sometimes linux/perf_event.h was enough as non-UAPI
types were not being used.

To keep te patch small, include those UAPI headers from the trimmed down
vmlinux.h file, that then provides the tools with just the structs and
the subset of its fields needed for them.

Testing it:

  # perf lock contention -b find / > /dev/null
  ^C contended   total wait     max wait     avg wait         type   caller

           7     53.59 us     10.86 us      7.66 us     rwlock:R   start_this_handle+0xa0
           2     30.35 us     21.99 us     15.17 us  rwsem:R   iterate_dir+0x52
           1   9.04 us      9.04 us      9.04 us     rwlock:W   start_this_handle+0x291
           1   8.73 us      8.73 us      8.73 us     spinlock   raw_spin_rq_lock_nested+0x1e
  #
  # perf lock contention -abl find / > /dev/null
  ^C contended   total wait     max wait     avg wait            address   symbol

           1    262.96 ms    262.96 ms    262.96 ms   ffff8e67502d0170    (mutex)
          12    244.24 us     39.91 us     20.35 us   ffff8e6af56f8070   mmap_lock (rwsem)
           7     30.28 us      6.85 us      4.33 us   ffff8e6c865f1d40   rq_lock (spinlock)
           3   7.42 us      4.03 us      2.47 us   ffff8e6c864b1d40   rq_lock (spinlock)
           2   3.72 us      2.19 us      1.86 us   ffff8e6c86571d40   rq_lock (spinlock)
           1   2.42 us      2.42 us      2.42 us   ffff8e6c86471d40   rq_lock (spinlock)
           4   2.11 us 559 ns       527 ns   ffffffff9a146c80   rcu_state (spinlock)
           3   1.45 us 818 ns       482 ns   ffff8e674ae8384c    (rwlock)
           1    870 ns 870 ns       870 ns   ffff8e68456ee060    (rwlock)
           1    663 ns 663 ns       663 ns   ffff8e6c864f1d40   rq_lock (spinlock)
           1    573 ns 573 ns       573 ns   ffff8e6c86531d40   rq_lock (spinlock)
           1    472 ns 472 ns       472 ns   ffff8e6c86431740    (spinlock)
           1    397 ns 397 ns       397 ns   ffff8e67413a4f04    (spinlock)
  #
  # perf test offcpu
  95: perf record offcpu profiling tests                              : Ok
  #
  # perf kwork latency --use-bpf
  Starting trace, Hit <Ctrl+C> to stop and report
  ^C
    Kwork Name                     | Cpu  | Avg delay     | Count     | Max delay     | Max delay start     | Max delay end   |
   --------------------------------------------------------------------------------------------------------------------------------
    (w)flush_memcg_stats_dwork     | 0000 |   1056.212 ms |         2 |   2112.345 ms |     550113.229573 s |     550115.341919 s |
    (w)toggle_allocation_gate    | 0000 |     10.144 ms |        62 |    416.389 ms |     550113.453518 s |     550113.869907 s |
    (w)0xffff8e6748e28080          | 0002 |  0.623 ms |         1 |      0.623 ms |     550110.989841 s |     550110.990464 s |
    (w)vmstat_shepherd             | 0000 |  0.586 ms |        10 |      2.828 ms |     550111.971536 s |     550111.974364 s |
    (w)vmstat_update               | 0007 |  0.363 ms |         5 |      1.634 ms |     550113.222520 s |     550113.224154 s |
    (w)vmstat_update               | 0000 |  0.324 ms |        10 |      2.827 ms |     550111.971526 s |     550111.974354 s |
    (w)0xffff8e674c5f4a58          | 0002 |  0.102 ms |         5 |      0.134 ms |     550110.989839 s |     550110.989972 s |
    (w)psi_avgs_work               | 0001 |  0.086 ms |         3 |      0.107 ms |     550114.957852 s |     550114.957959 s |
    (w)psi_avgs_work               | 0000 |  0.079 ms |         5 |      0.100 ms |     550118.605668 s |     550118.605768 s |
    (w)kfree_rcu_monitor           | 0006 |  0.079 ms |         1 |      0.079 ms |     550110.925821 s |     550110.925900 s |
    (w)psi_avgs_work               | 0004 |  0.079 ms |         1 |      0.079 ms |     550109.581835 s |     550109.581914 s |
    (w)psi_avgs_work               | 0001 |  0.078 ms |         1 |      0.078 ms |     550109.197809 s |     550109.197887 s |
    (w)psi_avgs_work               | 0002 |  0.077 ms |         5 |      0.086 ms |     550110.669819 s |     550110.669905 s |
  <SNIP>
  # strace -e bpf -o perf-stat-bpf-counters.output perf stat -e cycles --bpf-counters sleep 1

   Performance counter stats for 'sleep 1':

           6,197,983   cycles

         1.003922848 seconds time elapsed

         0.000000000 seconds user
         0.002032000 seconds sys

  # head -7 perf-stat-bpf-counters.output
  bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/perf_attr_map", bpf_fd=0, file_flags=0}, 16) = 3
  bpf(BPF_OBJ_GET_INFO_BY_FD, {info={bpf_fd=3, info_len=88, info=0x7ffcead64990}}, 16) = 0
  bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=3, key=0x24129e0, value=0x7ffcead65a48, flags=BPF_ANY}, 32) = 0
  bpf(BPF_LINK_GET_FD_BY_ID, {link_id=1252}, 12) = -1 ENOENT (No such file or directory)
  bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_SOCKET_FILTER, insn_cnt=2, insns=0x7ffcead65780, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(0, 0, 0), prog_flags=0, prog_name="", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=0, func_info_rec_size=0,
+func_info=NULL, func_info_cnt=0, line_info_rec_size=0, line_info=NULL, line_info_cnt=0, attach_btf_id=0, attach_prog_fd=0}, 116) = 4
  bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_SOCKET_FILTER, insn_cnt=2, insns=0x7ffcead65920, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(0, 0, 0), prog_flags=0, prog_name="", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=0, func_info_rec_size=0,
+func_info=NULL, func_info_cnt=0, line_info_rec_size=0, line_info=NULL, line_info_cnt=0, attach_btf_id=0, attach_prog_fd=0, fd_array=NULL}, 128) = 4
  bpf(BPF_BTF_LOAD, {btf="\237\353\1\0\30\0\0\0\0\0\0\0\20\0\0\0\20\0\0\0\5\0\0\0\1\0\0\0\0\0\0\1"..., btf_log_buf=NULL, btf_size=45, btf_log_size=0, btf_log_level=0}, 28) = 4
  #

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Co-developed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/lkml/ZFU1PJrn8YtHIqno@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge git://git./linux/kernel/git/netdev/net-next

There's a fix which landed in net-next, pull it in along
with the couple of minor cleanups.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

perf stat: Separate bperf from bpf_profiler

It seems that perf stat -b <prog id> doesn't produce any results:

    $ perf stat -e cycles -b 4 -I 10000 -vvv
    Control descriptor is not initialized
    cycles: 0 0 0
                time        counts unit      events
10.007641640    <not supported>      cycles

Looks like this happens because fentry/fexit progs are getting loaded, but the
corresponding perf event is not enabled and not added into the events bpf map.
I think there is some mixing up between two type of bpf support, one for bperf
and one for bpf_profiler. Both are identified via evsel__is_bpf, based on which
perf events are enabled, but for the latter (bpf_profiler) a perf event is
required. Using evsel__is_bperf to check only bperf produces expected results:

    $ perf stat -e cycles -b 4 -I 10000 -vvv
    Control descriptor is not initialized
    ------------------------------------------------------------
    perf_event_attr:
      size                             136
      sample_type                      IDENTIFIER
      read_format                      TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
      disabled                         1
      exclude_guest                    1
    ------------------------------------------------------------
    sys_perf_event_open: pid -1  cpu 0  group_fd -1  flags 0x8 = 3
    ------------------------------------------------------------
    [...perf_event_attr for other CPUs...]
    ------------------------------------------------------------
    cycles: 309426 169009 169009
time             counts unit events
10.010091271             309426      cycles

The final numbers correspond (at least in the level of magnitude) to the
same metric obtained via bpftool.

Fixes: 112cb56164bc2108 ("perf stat: Introduce config stat.bpf-counter-events")
Reviewed-by: Song Liu <song@kernel.org>
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Tested-by: Song Liu <song@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230412182316.11628-1-9erthalion6@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>