blk-crypto: add a blk_crypto_config_supported_natively helper

commit 6715c98b6cf003f26b1b2f655393134e9d999a05 upstream.

Add a blk_crypto_config_supported_natively helper that wraps
__blk_crypto_cfg_supported to retrieve the crypto_profile from the
request queue.  With this fscrypt can stop including
blk-crypto-profile.h and rely on the public consumer interface in
blk-crypto.h.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221114042944.1009870-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-crypto: don't use struct request_queue for public interfaces

commit fce3caea0f241f5d34855c82c399d5e0e2d91f07 upstream.

Switch all public blk-crypto interfaces to use struct block_device
arguments to specify the device they operate on instead of th
request_queue, which is a block layer implementation detail.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221114042944.1009870-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-stat: fix QUEUE_FLAG_STATS clear

commit 20de765f6d9da0c47b756429c60b41063b990a10 upstream.

We need to set QUEUE_FLAG_STATS for two cases:
1. blk_stat_enable_accounting()
2. blk_stat_add_callback()

So we should clear it only when ((q->stats->accounting == 0) &&
list_empty(&q->stats->callbacks)).

blk_stat_disable_accounting() only check if q->stats->accounting
is 0 before clear the flag, this patch fix it.

Also add list_empty(&q->stats->callbacks)) check when enable, or
the flag is already set.

The bug can be reproduced on kernel without BLK_DEV_THROTTLING
(since it unconditionally enable accounting, see the next patch).

  # cat /sys/block/sr0/queue/scheduler
  none mq-deadline [bfq]

  # cat /sys/kernel/debug/block/sr0/state
  SAME_COMP|IO_STAT|INIT_DONE|STATS|REGISTERED|NOWAIT|30

  # echo none > /sys/block/sr0/queue/scheduler

  # cat /sys/kernel/debug/block/sr0/state
  SAME_COMP|IO_STAT|INIT_DONE|REGISTERED|NOWAIT

  # cat /sys/block/sr0/queue/wbt_lat_usec
  75000

We can see that after changing elevator from "bfq" to "none",
"STATS" flag is lost even though WBT callback still need it.

Fixes: 68497092bde9 ("block: make queue stat accounting a reference")
Cc: <stable@vger.kernel.org> # v5.17+
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230413062805.2081970-1-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: ov8856: Do not check for for module version

commit 5a4e1b5aed2a36a10d6a3b30fafb6b3bf41c3186 upstream.

It the device is probed in non-zero ACPI D state, the module
identification is delayed until the first streamon.

The module identification has two parts: deviceID and version. To rea
the version we have to enable OTP read. This cannot be done during
streamon, becase it modifies REG_MODE_SELECT.

Since the driver has the same behaviour for all the module versions, do
not read the module version from the sensor's OTP.

Cc: stable@vger.kernel.org
Fixes: 0e014f1a8d54 ("media: ov8856: support device probe in non-zero ACPI D state")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

posix-cpu-timers: Implement the missing timer_wait_running callback

commit f7abf14f0001a5a47539d9f60bbdca649e43536b upstream.

For some unknown reason the introduction of the timer_wait_running callback
missed to fixup posix CPU timers, which went unnoticed for almost four years.
Marco reported recently that the WARN_ON() in timer_wait_running()
triggers with a posix CPU timer test case.

Posix CPU timers have two execution models for expiring timers depending on
CONFIG_POSIX_CPU_TIMERS_TASK_WORK:

1) If not enabled, the expiry happens in hard interrupt context so
   spin waiting on the remote CPU is reasonably time bound.

   Implement an empty stub function for that case.

2) If enabled, the expiry happens in task work before returning to user
   space or guest mode. The expired timers are marked as firing and moved
   from the timer queue to a local list head with sighand lock held. Once
   the timers are moved, sighand lock is dropped and the expiry happens in
   fully preemptible context. That means the expiring task can be scheduled
   out, migrated, interrupted etc. So spin waiting on it is more than
   suboptimal.

   The timer wheel has a timer_wait_running() mechanism for RT, which uses
   a per CPU timer-base expiry lock which is held by the expiry code and the
   task waiting for the timer function to complete blocks on that lock.

   This does not work in the same way for posix CPU timers as there is no
   timer base and expiry for process wide timers can run on any task
   belonging to that process, but the concept of waiting on an expiry lock
   can be used too in a slightly different way:

    - Add a mutex to struct posix_cputimers_work. This struct is per task
      and used to schedule the expiry task work from the timer interrupt.

    - Add a task_struct pointer to struct cpu_timer which is used to store
      a the task which runs the expiry. That's filled in when the task
      moves the expired timers to the local expiry list. That's not
      affecting the size of the k_itimer union as there are bigger union
      members already

    - Let the task take the expiry mutex around the expiry function

    - Let the waiter acquire a task reference with rcu_read_lock() held and
      block on the expiry mutex

   This avoids spin-waiting on a task which might not even be on a CPU and
   works nicely for RT too.

Fixes: ec8f954a40da ("posix-timers: Use a callback for cancel synchronization on PREEMPT_RT")
Reported-by: Marco Elver <elver@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marco Elver <elver@google.com>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87zg764ojw.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: Add !tpm_amd_is_rng_defective() to the hwrng_unregister() call site

commit bd8621ca1510e6e802df9855bdc35a04a3cfa932 upstream.

The following crash was reported:

[ 1950.279393] list_del corruption, ffff99560d485790->next is NULL
[ 1950.279400] ------------[ cut here ]------------
[ 1950.279401] kernel BUG at lib/list_debug.c:49!
[ 1950.279405] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 1950.279407] CPU: 11 PID: 5886 Comm: modprobe Tainted: G O 6.2.8_1 #1
[ 1950.279409] Hardware name: Gigabyte Technology Co., Ltd. B550M AORUS PRO-P/B550M AORUS PRO-P,
BIOS F15c 05/11/2022
[ 1950.279410] RIP: 0010:__list_del_entry_valid+0x59/0xc0
[ 1950.279415] Code: 48 8b 01 48 39 f8 75 5a 48 8b 72 08 48 39 c6 75 65 b8 01 00 00 00 c3 cc cc cc
cc 48 89 fe 48 c7 c7 08 a8 13 9e e8 b7 0a bc ff <0f> 0b 48 89 fe 48 c7 c7 38 a8 13 9e e8 a6 0a bc
ff 0f 0b 48 89 fe
[ 1950.279416] RSP: 0018:ffffa96d05647e08 EFLAGS: 00010246
[ 1950.279418] RAX: 0000000000000033 RBX: ffff99560d485750 RCX: 0000000000000000
[ 1950.279419] RDX: 0000000000000000 RSI: ffffffff9e107c59 RDI: 00000000ffffffff
[ 1950.279420] RBP: ffffffffc19c5168 R08: 0000000000000000 R09: ffffa96d05647cc8
[ 1950.279421] R10: 0000000000000003 R11: ffffffff9ea2a568 R12: 0000000000000000
[ 1950.279422] R13: ffff99560140a2e0 R14: ffff99560127d2e0 R15: 0000000000000000
[ 1950.279422] FS: 00007f67da795380(0000) GS:ffff995d1f0c0000(0000) knlGS:0000000000000000
[ 1950.279424] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1950.279424] CR2: 00007f67da7e65c0 CR3: 00000001feed2000 CR4: 0000000000750ee0
[ 1950.279426] PKRU: 55555554
[ 1950.279426] Call Trace:
[ 1950.279428] <TASK>
[ 1950.279430] hwrng_unregister+0x28/0xe0 [rng_core]
[ 1950.279436] tpm_chip_unregister+0xd5/0xf0 [tpm]

Add the forgotten !tpm_amd_is_rng_defective() invariant to the
hwrng_unregister() call site inside tpm_chip_unregister().

Cc: stable@vger.kernel.org
Reported-by: Martin Dimov <martin@dmarto.com>
Link: https://lore.kernel.org/linux-integrity/3d1d7e9dbfb8c96125bc93b6b58b90a7@dmarto.com/
Fixes: f1324bbc4011 ("tpm: disable hwrng for fTPM on some AMD designs")
Fixes: b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources")
Tested-by: Martin Dimov <martin@dmarto.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (adt7475) Use device_property APIs when configuring polarity

commit 2a8e41ad337508fc5d598c0f9288890214f8e318 upstream.

On DT unaware platforms of_property_read_u32_array() returns -ENOSYS
which wasn't handled by the code treating adi,pwm-active-state as
optional. Update the code to use device_property_read_u32_array() which
deals gracefully with DT unaware platforms.

Fixes: 86da28eed4fb ("hwmon: (adt7475) Add support for inverting pwm output")
Reported-by: Mariusz Białończyk <manio@skyboo.net>
Link: https://lore.kernel.org/linux-hwmon/52e26a67-9131-2dc0-40cb-db5c07370027@alliedtelesis.co.nz/T/#mdd0505801e0a4e72340de009a47c0fca4f771ed3
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20230418233656.869055-2-chris.packham@alliedtelesis.co.nz
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (k10temp) Check range scale when CUR_TEMP register is read-write

commit 0c072385348e3ac5229145644055d3e2afb5b3db upstream.

Spec says, when CUR_TEMP_TJ_SEL == 3 and CUR_TEMP_RANGE_SEL == 0,
it should use RangeUnadjusted is 0, which is (CurTmp*0.125 -49) C. The
CUR_TEMP register is read-write when CUR_TEMP_TJ_SEL == 3 (bit 17-16).

Add the check to detect it.

Sensors command's output before the patch.
$sensors
 k10temp-pci-00c3
 Adapter: PCI adapter
 Tctl:         +76.6°C <- Wrong value
 Tccd1:        +26.5°C
 Tccd2:        +27.5°C
 Tccd3:        +27.2°C
 Tccd4:        +27.5°C
 Tccd5:        +26.0°C
 Tccd6:        +26.2°C
 Tccd7:        +25.0°C
 Tccd8:        +26.5°C

Sensors command's output after the patch.
$sensors
 k10temp-pci-00c3
 Adapter: PCI adapter
 Tctl:         +28.8°C <- corrected value
 Tccd1:        +27.5°C
 Tccd2:        +28.5°C
 Tccd3:        +28.5°C
 Tccd4:        +28.5°C
 Tccd5:        +27.0°C
 Tccd6:        +27.5°C
 Tccd7:        +27.0°C
 Tccd8:        +27.5°C

Signed-off-by: Babu Moger <babu.moger@amd.com>
Fixes: 1b59788979ac ("hwmon: (k10temp) Add temperature offset for Ryzen 2700X")
Link: https://lore.kernel.org/r/20230413213958.847634-1-babu.moger@amd.com
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: dwc3: fix runtime pm imbalance on unbind

commit 44d257e9012ee8040e41d224d0e5bfb5ef5427ea upstream.

Make sure to balance the runtime PM usage count on driver unbind by
adding back the pm_runtime_allow() call that had been erroneously
removed.

Fixes: 266d0493900a ("usb: dwc3: core: don't trigger runtime pm when remove driver")
Cc: stable@vger.kernel.org # 5.9
Cc: Li Jun <jun.li@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230404072524.19014-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: dwc3: fix runtime pm imbalance on probe errors

commit 9a8ad10c9f2e0925ff26308ec6756b93fc2f4977 upstream.

Make sure not to suspend the device when probe fails to avoid disabling
clocks and phys multiple times.

Fixes: 328082376aea ("usb: dwc3: fix runtime PM in error path")
Cc: stable@vger.kernel.org # 4.8
Cc: Roger Quadros <rogerq@ti.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230404072524.19014-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Stall and restart EP0 if host is unresponsive

commit 02435a739b81ae24aff5d6e930efef9458e2af3c upstream.

It was observed that there are hosts that may complete pending SETUP
transactions before the stop active transfers and controller halt occurs,
leading to lingering endxfer commands on DEPs on subsequent pullup/gadget
start iterations.

  dwc3_gadget_ep_disable   name=ep8in flags=0x3009  direction=1
  dwc3_gadget_ep_disable   name=ep4in flags=1  direction=1
  dwc3_gadget_ep_disable   name=ep3out flags=1  direction=0
  usb_gadget_disconnect   deactivated=0  connected=0  ret=0

The sequence shows that the USB gadget disconnect (dwc3_gadget_pullup(0))
routine completed successfully, allowing for the USB gadget to proceed with
a USB gadget connect.  However, if this occurs the system runs into an
issue where:

  BUG: spinlock already unlocked on CPU
  spin_bug+0x0
  dwc3_remove_requests+0x278
  dwc3_ep0_out_start+0xb0
  __dwc3_gadget_start+0x25c

This is due to the pending endxfers, leading to gadget start (w/o lock
held) to execute the remove requests, which will unlock the dwc3
spinlock as part of giveback.

To mitigate this, resolve the pending endxfers on the pullup disable
path by re-locating the SETUP phase check after stop active transfers, since
that is where the DWC3_EP_DELAY_STOP is potentially set.  This also allows
for handling of a host that may be unresponsive by using the completion
timeout to trigger the stall and restart for EP0.

Fixes: c96683798e27 ("usb: dwc3: ep0: Don't prepare beyond Setup stage")
Cc: stable@vger.kernel.org
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20230413195742.11821-2-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: udc: core: Prevent redundant calls to pullup

commit a3afbf5cc887fc3401f012fe629810998ed61859 upstream.

usb_gadget_connect calls gadget->ops->pullup without checking whether
gadget->connected was previously set. Make this symmetric to
usb_gadget_disconnect by returning early if gadget->connected is
already set.

Fixes: 5a1da544e572 ("usb: gadget: core: do not try to disconnect gadget if it is not connected")
Cc: stable@vger.kernel.org
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20230407030741.3163220-2-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: udc: core: Invoke usb_gadget_connect only when started

commit 0db213ea8eed5534a5169e807f28103cbc9d23df upstream.

usb_udc_connect_control does not check to see if the udc has already
been started. This causes gadget->ops->pullup to be called through
usb_gadget_connect when invoked from usb_udc_vbus_handler even before
usb_gadget_udc_start is called. Guard this by checking for udc->started
in usb_udc_connect_control before invoking usb_gadget_connect.

Guarding udc->vbus, udc->started, gadget->connect, gadget->deactivate
related functions with connect_lock. usb_gadget_connect_locked,
usb_gadget_disconnect_locked, usb_udc_connect_control_locked,
usb_gadget_udc_start_locked, usb_gadget_udc_stop_locked are called with
this lock held as they can be simulataneously invoked from different code
paths.

Adding an additional check to make sure udc is started(udc->started)
before pullup callback is invoked.

Fixes: 628ef0d273a6 ("usb: udc: add usb_udc_vbus_handler")
Cc: stable@vger.kernel.org
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20230407030741.3163220-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IMA: allow/fix UML builds

commit 644f17412f5acf01a19af9d04a921937a2bc86c6 upstream.

UML supports HAS_IOMEM since 0bbadafdc49d (um: allow disabling
NO_IOMEM).

Current IMA build on UML fails on allmodconfig (with TCG_TPM=m):

ld: security/integrity/ima/ima_queue.o: in function `ima_add_template_entry':
ima_queue.c:(.text+0x2d9): undefined reference to `tpm_pcr_extend'
ld: security/integrity/ima/ima_init.o: in function `ima_init':
ima_init.c:(.init.text+0x43f): undefined reference to `tpm_default_chip'
ld: security/integrity/ima/ima_crypto.o: in function `ima_calc_boot_aggregate_tfm':
ima_crypto.c:(.text+0x1044): undefined reference to `tpm_pcr_read'
ld: ima_crypto.c:(.text+0x10d8): undefined reference to `tpm_pcr_read'

Modify the IMA Kconfig entry so that it selects TCG_TPM if HAS_IOMEM
is set, regardless of the UML Kconfig setting.
This updates TCG_TPM from =m to =y and fixes the linker errors.

Fixes: f4a0391dfa91 ("ima: fix Kconfig dependencies")
Cc: Stable <stable@vger.kernel.org> # v5.14+
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-um@lists.infradead.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: qcom-qmp-pcie: sc8180x PCIe PHY has 2 lanes

commit 1db6b0a4246ce708b89f5136571130b9987741d1 upstream.

All PCIe PHYs on sc8180x platform have 2 lanes, so change the number of
lanes to 2.

Fixes: f839f14e24f2 ("phy: qcom-qmp: Add sc8180x PCIe support")
Cc: stable@vger.kernel.org # 5.15
Sgned-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230331151250.4049-1-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: qcom: Fix the incorrect register usage in v2.7.0 config

commit 2542e16c392508800f1d9037feee881a9c444951 upstream.

Qcom PCIe IP version v2.7.0 and its derivatives don't contain the
PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT register. Instead, they have the new
PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 register. So fix the incorrect
register usage which is modifying a different register.

Also in this IP version, this register change doesn't depend on MSI
being enabled. So remove that check also.

Link: https://lore.kernel.org/r/20230316081117.14288-2-manivannan.sadhasivam@linaro.org
Fixes: ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: <stable@vger.kernel.org> # 5.6+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: pciehp: Fix AB-BA deadlock between reset_lock and device_lock

commit f5eff5591b8f9c5effd25c92c758a127765f74c1 upstream.

In 2013, commits

  2e35afaefe64 ("PCI: pciehp: Add reset_slot() method")
  608c388122c7 ("PCI: Add slot reset option to pci_dev_reset()")

amended PCIe hotplug to mask Presence Detect Changed events during a
Secondary Bus Reset.  The reset thus no longer causes gratuitous slot
bringdown and bringup.

However the commits neglected to serialize reset with code paths reading
slot registers.  For instance, a slot bringup due to an earlier hotplug
event may see the Presence Detect State bit cleared during a concurrent
Secondary Bus Reset.

In 2018, commit

  5b3f7b7d062b ("PCI: pciehp: Avoid slot access during reset")

retrofitted the missing locking.  It introduced a reset_lock which
serializes a Secondary Bus Reset with other parts of pciehp.

Unfortunately the locking turns out to be overzealous:  reset_lock is
held for the entire enumeration and de-enumeration of hotplugged devices,
including driver binding and unbinding.

Driver binding and unbinding acquires device_lock while the reset_lock
of the ancestral hotplug port is held.  A concurrent Secondary Bus Reset
acquires the ancestral reset_lock while already holding the device_lock.
The asymmetric locking order in the two code paths can lead to AB-BA
deadlocks.

Michael Haeuptle reports such deadlocks on simultaneous hot-removal and
vfio release (the latter implies a Secondary Bus Reset):

  pciehp_ist()                                    # down_read(reset_lock)
    pciehp_handle_presence_or_link_change()
      pciehp_disable_slot()
        __pciehp_disable_slot()
          remove_board()
            pciehp_unconfigure_device()
              pci_stop_and_remove_bus_device()
                pci_stop_bus_device()
                  pci_stop_dev()
                    device_release_driver()
                      device_release_driver_internal()
                        __device_driver_lock()    # device_lock()

  SYS_munmap()
    vfio_device_fops_release()
      vfio_device_group_close()
        vfio_device_close()
          vfio_device_last_close()
            vfio_pci_core_close_device()
              vfio_pci_core_disable()             # device_lock()
                __pci_reset_function_locked()
                  pci_reset_bus_function()
                    pci_dev_reset_slot_function()
                      pci_reset_hotplug_slot()
                        pciehp_reset_slot()       # down_write(reset_lock)

Ian May reports the same deadlock on simultaneous hot-removal and an
AER-induced Secondary Bus Reset:

  aer_recover_work_func()
    pcie_do_recovery()
      aer_root_reset()
        pci_bus_error_reset()
          pci_slot_reset()
            pci_slot_lock()                       # device_lock()
            pci_reset_hotplug_slot()
              pciehp_reset_slot()                 # down_write(reset_lock)

Fix by releasing the reset_lock during driver binding and unbinding,
thereby splitting and shrinking the critical section.

Driver binding and unbinding is protected by the device_lock() and thus
serialized with a Secondary Bus Reset.  There's no need to additionally
protect it with the reset_lock.  However, pciehp does not bind and
unbind devices directly, but rather invokes PCI core functions which
also perform certain enumeration and de-enumeration steps.

The reset_lock's purpose is to protect slot registers, not enumeration
and de-enumeration of hotplugged devices.  That would arguably be the
job of the PCI core, not the PCIe hotplug driver.  After all, an
AER-induced Secondary Bus Reset may as well happen during boot-time
enumeration of the PCI hierarchy and there's no locking to prevent that
either.

Exempting *de-enumeration* from the reset_lock is relatively harmless:
A concurrent Secondary Bus Reset may foil config space accesses such as
PME interrupt disablement.  But if the device is physically gone, those
accesses are pointless anyway.  If the device is physically present and
only logically removed through an Attention Button press or the sysfs
"power" attribute, PME interrupts as well as DMA cannot come through
because pciehp_unconfigure_device() disables INTx and Bus Master bits.
That's still protected by the reset_lock in the present commit.

Exempting *enumeration* from the reset_lock also has limited impact:
The exempted call to pci_bus_add_device() may perform device accesses
through pcibios_bus_add_device() and pci_fixup_device() which are now
no longer protected from a concurrent Secondary Bus Reset.  Otherwise
there should be no impact.

In essence, the present commit seeks to fix the AB-BA deadlocks while
still retaining a best-effort reset protection for enumeration and
de-enumeration of hotplugged devices -- until a general solution is
implemented in the PCI core.

Link: https://lore.kernel.org/linux-pci/CS1PR8401MB0728FC6FDAB8A35C22BD90EC95F10@CS1PR8401MB0728.NAMPRD84.PROD.OUTLOOK.COM
Link: https://lore.kernel.org/linux-pci/20200615143250.438252-1-ian.may@canonical.com
Link: https://lore.kernel.org/linux-pci/ce878dab-c0c4-5bd0-a725-9805a075682d@amd.com
Link: https://lore.kernel.org/linux-pci/ed831249-384a-6d35-0831-70af191e9bce@huawei.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215590
Fixes: 5b3f7b7d062b ("PCI: pciehp: Avoid slot access during reset")
Link: https://lore.kernel.org/r/fef2b2e9edf245c049a8c5b94743c0f74ff5008a.1681191902.git.lukas@wunner.de
Reported-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reported-by: Ian May <ian.may@canonical.com>
Reported-by: Andrey Grodzovsky <andrey2805@gmail.com>
Reported-by: Rahul Kumar <rahul.kumar1@amd.com>
Reported-by: Jialin Zhang <zhangjialin11@huawei.com>
Tested-by: Anatoli Antonovitch <Anatoli.Antonovitch@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v4.19+
Cc: Dan Stein <dstein@hpe.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Alex Michon <amichon@kalrayinc.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: kirin: Select REGMAP_MMIO

commit 3a2776e8a0e156a61f5b59ae341d8fffc730b962 upstream.

pcie-kirin uses regmaps, and needs to pull them in; otherwise, with
CONFIG_PCIE_KIRIN=y and without CONFIG_REGMAP_MMIO pcie-kirin produces
a linker failure looking for __devm_regmap_init_mmio_clk().

Fixes: d19afe7be126 ("PCI: kirin: Use regmap for APB registers")
Link: https://lore.kernel.org/r/04636141da1d6d592174eefb56760511468d035d.1668410580.git.josh@joshtriplett.org
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
[lpieralisi@kernel.org: commit log and removed REGMAP select]
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org # 5.16+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/boot: Fix boot wrapper code generation with CONFIG_POWER10_CPU

commit 648a1783fe2551f5a091c9a5f8f463cb2cbf8745 upstream.

-mcpu=power10 will generate prefixed and pcrel code by default, which
we do not support. The general kernel disables these with cflags, but
those were missed for the boot wrapper.

Fixes: 4b2a9315f20d ("powerpc/64s: POWER10 CPU Kconfig build option")
Cc: stable@vger.kernel.org # v6.1+
Reported-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230407040909.230998-1-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Stash shadow stack pointer in the task struct on interrupt

commit 59b37fe52f49955791a460752c37145f1afdcad1 upstream.

Instead of reloading the shadow call stack pointer from the ordinary
stack, which may be vulnerable to the kind of gadget based attacks
shadow call stacks were designed to prevent, let's store a task's shadow
call stack pointer in the task struct when switching to the shadow IRQ
stack.

Given that currently, the task_struct::scs_sp field is only used to
preserve the shadow call stack pointer while a task is scheduled out or
running in user space, reusing this field to preserve and restore it
while running off the IRQ stack must be safe, as those occurrences are
guaranteed to never overlap. (The stack switching logic only switches
stacks when running from the task stack, and so the value being saved
here always corresponds to the task mode shadow stack)

While at it, fold a mov/add/mov sequence into a single add.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230109174800.3286265-3-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Always load shadow stack pointer directly from the task struct

commit 2198d07c509f1db4a1185d1f65aaada794c6ea59 upstream.

All occurrences of the scs_load macro load the value of the shadow call
stack pointer from the task which is current at that point. So instead
of taking a task struct register argument in the scs_load macro to
specify the task struct to load from, let's always reference the current
task directly. This should make it much harder to exploit any
instruction sequences reloading the shadow call stack pointer register
from memory.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230109174800.3286265-2-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: amd: ps: update the acp clock source.

commit a4d432e9132c0b29d857b09ca2ec4c1f455b5948 upstream.

Updating the clock source from ACLK to default clock

Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://lore.kernel.org/r/20230331052102.2211115-1-Syed.SabaKareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: amd: fix ACP version typo mistake

commit 4b19211435950a78af032c26ad64a5268e6012be upstream.

Pink Sardine is based on ACP6.3 architecture.
This patch fixes the typo mistake acp6.2 -> acp6.3

Signed-off-by: syed saba kareem <syed.sabakareem@amd.com>
Link: https://lore.kernel.org/r/20221104121001.207992-1-Syed.SabaKareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: mt76: mt7921e: Set memory space enable in PCI_COMMAND if unset

commit 09d4d6da1b65d09414e7bce61459593f3c80ead1 upstream.

When the BIOS has been configured for Fast Boot, systems with mt7921e
have non-functional wifi.  Turning on Fast boot caused both bus master
enable and memory space enable bits in PCI_COMMAND not to get configured.

The mt7921 driver already sets bus master enable, but explicitly check
and set memory access enable as well to fix this problem.

Tested-by: Anson Tsao <anson.tsao@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wireguard: timers: cast enum limits members to int in prints

commit 2d4ee16d969c97996e80e4c9cb6de0acaff22c9f upstream.

Since gcc13, each member of an enum has the same type as the enum. And
that is inherited from its members. Provided "REKEY_AFTER_MESSAGES =
1ULL << 60", the named type is unsigned long.

This generates warnings with gcc-13:
  error: format '%d' expects argument of type 'int', but argument 6 has type 'long unsigned int'

Cast those particular enum members to int when printing them.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=36113
Cc: Martin Liska <mliska@suse.cz>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/all/20221213225208.3343692-2-Jason@zx2c4.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cc: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpu: Add model number for Intel Arrow Lake processor

[ Upstream commit 81515ecf155a38f3532bf5ddef88d651898df6be ]

Successor to Lunar Lake.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230404174641.426593-1-tony.luck@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

asm-generic/io.h: suppress endianness warnings for readq() and writeq()

[ Upstream commit d564fa1ff19e893e2971d66e5c8f49dc1cdc8ffc ]

Commit c1d55d50139b ("asm-generic/io.h: Fix sparse warnings on
big-endian architectures") missed fixing the 64-bit accessors.

Arnd explains in the attached link why the casts are necessary, even if
__raw_readq() and __raw_writeq() do not take endian-specific types.

Link: https://lore.kernel.org/lkml/9105d6fc-880b-4734-857d-e3d30b87ccf6@app.fastmail.com/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Error if a trace event has an array for a __field()

[ Upstream commit f82e7ca019dfad3b006fd3b772f7ac569672db55 ]

A __field() in the TRACE_EVENT() macro is used to set up the fields of the
trace event data. It is for single storage units (word, char, int,
pointer, etc) and not for complex structures or arrays. Unfortunately,
there's nothing preventing the build from accepting:

    __field(int, arr[5]);

from building. It will turn into a array value. This use to work fine, as
the offset and size use to be determined by the macro using the field name,
but things have changed and the offset and size are now determined by the
type. So the above would only be size 4, and the next field will be
located 4 bytes from it (instead of 20).

The proper way to declare static arrays is to use the __array() macro.

Instead of __field(int, arr[5]) it should be __array(int, arr, 5).

Add some macro tricks to the building of a trace event from the
TRACE_EVENT() macro such that __field(int, arr[5]) will fail to build. A
comment by the failure will explain why the build failed.

Link: https://lore.kernel.org/lkml/20230306122549.236561-1-douglas.raillard@arm.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230309221302.642e82d9@gandalf.local.home
Reported-by: Douglas RAILLARD <douglas.raillard@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath11k: reduce the MHI timeout to 20s

[ Upstream commit cf5fa3ca0552f1b7ba8490de40700bbfb6979b17 ]

Currently ath11k breaks after hibernation, the reason being that ath11k expects
that the wireless device will have power during suspend and the firmware will
continue running. But of course during hibernation the power from the device is
cut off and firmware is not running when resuming, so ath11k will fail.

(The reason why ath11k needs the firmware running is the interaction between
mac80211 and MHI stack, it's a long story and more info in the bugzilla report.)

In SUSE kernels the watchdog timeout is reduced from the default 120 to 60 seconds:

CONFIG_DPM_WATCHDOG_TIMEOUT=60

But as the ath11k MHI timeout is 90 seconds the kernel will crash before will
ath11k will recover in resume callback. To avoid the crash reduce the MHI
timeout to just 20 seconds.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9

Link: https://bugzilla.kernel.org/show_bug.cgi?id=214649
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230329162038.8637-1-kvalo@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: thinkpad_acpi: Add missing T14s Gen1 type to s2idle quirk list

[ Upstream commit 9a469c6dfab38326f99f105386db84230be09ee3 ]

From the commit message adding the first s2idle quirks:

> Lenovo laptops that contain NVME SSDs across a variety of generations have
> trouble resuming from suspend to idle when the IOMMU translation layer is
> active for the NVME storage device.
>
> This generally manifests as a large resume delay or page faults. These
> delays and page faults occur as a result of a Lenovo BIOS specific SMI
> that runs during the D3->D0 transition on NVME devices.

Add the DMI ids for another variant of the T14s Gen1, which also needs
the s2idle quirk.

Link: https://lore.kernel.org/all/20220503183420.348-1-mario.limonciello@amd.com/
Link: https://bbs.archlinux.org/viewtopic.php?pid=2084655#p2084655
Signed-off-by: Benjamin Asbach <asbachb.kernel@impl.it>
Tested-by: Benjamin Asbach <asbachb.kernel@impl.it>
Link: https://lore.kernel.org/r/20230331232447.37204-1-asbachb.kernel@impl.it
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sfp: add quirk enabling 2500Base-x for HG MXPD-483II

[ Upstream commit ad651d68cee75e9ac20002254c4e5d09ee67a84b ]

The HG MXPD-483II 1310nm SFP module is meant to operate with 2500Base-X,
however, in their EEPROM they incorrectly specify:
    Transceiver type                          : Ethernet: 1000BASE-LX
    ...
    BR, Nominal                               : 2600MBd

Use sfp_quirk_2500basex for this module to allow 2500Base-X mode anyway.

https://forum.banana-pi.org/t/bpi-r3-sfp-module-compatibility/14573/60

Reported-by: chowtom <chowtom@gmail.com>
Tested-by: chowtom <chowtom@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpi3mr: Handle soft reset in progress fault code (0xF002)

[ Upstream commit a3d27dfdcfc27ac3f46de5391bb6d24f04af7941 ]

The driver is exiting from the fault watchdog thread if it sees the 0xF002
(Soft reset in progress) fault code.

If the driver initiates the soft reset, then the driver restarts the
watchdog at the end of the soft reset completion.  However, if the soft
reset is initiated by the firmware asynchronously, then the driver will
never restart the watchdog and never re-initialize the controller after the
asynchronous soft reset completion.

Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20230331122317.11391-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests mount: Fix mount_setattr_test builds failed

[ Upstream commit f1594bc676579133a3cd906d7d27733289edfb86 ]

When compiling selftests with target mount_setattr I encountered some errors with the below messages:
mount_setattr_test.c: In function ‘mount_setattr_thread’:
mount_setattr_test.c:343:16: error: variable ‘attr’ has initializer but incomplete type
  343 |         struct mount_attr attr = {
      |                ^~~~~~~~~~

These errors might be because of linux/mount.h is not included. This patch resolves that issue.

Signed-off-by: Anh Tuan Phan <tuananhlfc@gmail.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: wwan: t7xx: do not compile with -Werror

[ Upstream commit 362f0b6678ad1377c322a7dd237ea6785efc7342 ]

When playing with various compilers or their versions, some choke on
the t7xx code. For example (with gcc 13):
 In file included from ./arch/s390/include/generated/asm/rwonce.h:1,
                  from ../include/linux/compiler.h:247,
                  from ../include/linux/build_bug.h:5,
                  from ../include/linux/bits.h:22,
                  from ../drivers/net/wwan/t7xx/t7xx_state_monitor.c:17:
 In function 'preempt_count',
     inlined from 't7xx_fsm_append_event' at ../drivers/net/wwan/t7xx/t7xx_state_monitor.c:439:43:
 ../include/asm-generic/rwonce.h:44:26: error: array subscript 0 is outside array bounds of 'const volatile int[0]' [-Werror=array-bounds=]

There is no reason for any code in the kernel to be built with -Werror
by default. Note that we have generic CONFIG_WERROR. So if anyone wants
-Werror, they can enable that.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/all/20230330232717.1f8bf5ea@kernel.org/
Cc: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Cc: Intel Corporation <linuxwwan@intel.com>
Cc: Chiranjeevi Rapolu <chiranjeevi.rapolu@linux.intel.com>
Cc: Liu Haijun <haijun.liu@mediatek.com>
Cc: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Cc: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: da7213.c: add missing pm_runtime_disable()

[ Upstream commit 44378cd113e5f15bb0a89f5ac5a0e687b52feb90 ]

da7213.c is missing pm_runtime_disable(), thus we will get
below error when rmmod -> insmod.

$ rmmod  snd-soc-da7213.ko
$ insmod snd-soc-da7213.ko
da7213 0-001a: Unbalanced pm_runtime_enable!"

[Kuninori adjusted to latest upstream]

Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Khanh Le <khanh.le.xr@renesas.com>
Link: https://lore.kernel.org/r/87mt3xg2tk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: bytcr_rt5640: Add quirk for the Acer Iconia One 7 B1-750

[ Upstream commit e38c5e80c3d293a883c6f1d553f2146ec0bda35e ]

The Acer Iconia One 7 B1-750 tablet mostly works fine with the defaults
for an Bay Trail CR tablet. Except for the internal mic, instead of
an analog mic on IN3 a digital mic on DMIC1 is uses.

Add a quirk with these settings for this tablet.

Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230322145332.131525-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: palmas_gpadc: fix NULL dereference on rmmod

[ Upstream commit 49f76c499d38bf67803438eee88c8300d0f6ce09 ]

Calling dev_to_iio_dev() on a platform device pointer is undefined and
will make adc NULL.

Signed-off-by: Patrik Dahlström <risca@dalakolonin.se>
Link: https://lore.kernel.org/r/20230313205029.1881745-1-risca@dalakolonin.se
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: amd: yc: Add DMI entries to support Victus by HP Laptop 16-e1xxx (8A22)

[ Upstream commit 205efd4619b860404ebb5882e5a119eb3b3b3716 ]

This model requires an additional detection quirk to
enable the internal microphone.

Tried to use git send-email this time.

Signed-off-by: Ge-org Brohammer <gbrohammer@outlook.com>
Link: https://lore.kernel.org/r/PAVP195MB2261322C220E95D7F4B2732ADABC9@PAVP195MB2261.EURP195.PROD.OUTLOOK.COM
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/hyperv: Block root partition functionality in a Confidential VM

[ Upstream commit f8acb24aaf89fc46cd953229462ea8abe31b395f ]

Hyper-V should never specify a VM that is a Confidential VM and also
running in the root partition.  Nonetheless, explicitly block such a
combination to guard against a compromised Hyper-V maliciously trying to
exploit root partition functionality in a Confidential VM to expose
Confidential VM secrets. No known bug is being fixed, but the attack
surface for Confidential VMs on Hyper-V is reduced.

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1678894453-95392-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: soc-pcm: fix hw->formats cleared by soc_pcm_hw_init() for dpcm

[ Upstream commit 083a25b18d6ad9f1f540e629909aa3eaaaf01823 ]

The hw->formats may be set by snd_dmaengine_pcm_refine_runtime_hwparams()
in component's startup()/open(), but soc_pcm_hw_init() will init
hw->formats in dpcm_runtime_setup_fe() after component's startup()/open(),
which causes the valuable hw->formats to be cleared.

So need to store the hw->formats before initialization, then restore
it after initialization.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1678346017-3660-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: soc-acpi: add table for Intel 'Rooks County' NUC M15

[ Upstream commit 9c691a42b8926c8966561265cdae3ddc7464d3a2 ]

Same topology as the HP Omen 16-k0005TX, except with the rt1316 amp
on link2.

Link: https://github.com/thesofproject/linux/issues/4088
Signed-off-by: Eugene Huang <eugene.huang99@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314090553.498664-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASOC: Intel: sof_sdw: add quirk for Intel 'Rooks County' NUC M15

[ Upstream commit 3c728b1bc5b99c5275ac5c7788ef814c0e51ef54 ]

Same quirks as the 'Bishop County' NUC M15, except the rt711 is in the
'JD2 100K' jack detection mode.

Link: https://github.com/thesofproject/linux/issues/4088
Signed-off-by: Eugene Huang <eugene.huang99@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314090553.498664-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 6.1.27

Link: https://lore.kernel.org/r/20230428112040.063291126@linuxfoundation.org
Tested-by: Markus Reichelt <lkt+2023@mareichelt.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: No need to relocate the dtb as it lies in the fixmap region

commit 1b50f956c8fe9082bdee4a9cfd798149c52f7043 upstream.

We used to access the dtb via its linear mapping address but now that the
dtb early mapping was moved in the fixmap region, we can keep using this
address since it is present in swapper_pg_dir, and remove the dtb
relocation.

Note that the relocation was wrong anyway since early_memremap() is
restricted to 256K whereas the maximum fdt size is 2MB.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230329081932.79831-4-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Do not set initial_boot_params to the linear address of the dtb

commit f1581626071c8e37c58c5e8f0b4126b17172a211 upstream.

early_init_dt_verify() is already called in parse_dtb() and since the dtb
address does not change anymore (it is now in the fixmap region), no need
to reset initial_boot_params by calling early_init_dt_verify() again.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230329081932.79831-3-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Move early dtb mapping into the fixmap region

commit ef69d2559fe91f23d27a3d6fd640b5641787d22e upstream.

riscv establishes 2 virtual mappings:

- early_pg_dir maps the kernel which allows to discover the system
  memory
- swapper_pg_dir installs the final mapping (linear mapping included)

We used to map the dtb in early_pg_dir using DTB_EARLY_BASE_VA, and this
mapping was not carried over in swapper_pg_dir. It happens that
early_init_fdt_scan_reserved_mem() must be called before swapper_pg_dir is
setup otherwise we could allocate reserved memory defined in the dtb.
And this function initializes reserved_mem variable with addresses that
lie in the early_pg_dir dtb mapping: when those addresses are reused
with swapper_pg_dir, this mapping does not exist and then we trap.

The previous "fix" was incorrect as early_init_fdt_scan_reserved_mem()
must be called before swapper_pg_dir is set up otherwise we could
allocate in reserved memory defined in the dtb.

So move the dtb mapping in the fixmap region which is established in
early_pg_dir and handed over to swapper_pg_dir.

This patch had to be backported because:
- the documentation for sv57 is not present here (as sv48/57 are not
  present)

Fixes: 922b0375fc93 ("riscv: Fix memblock reservation for device tree blob")
Fixes: 8f3a2b4a96dc ("RISC-V: Move DT mapping outof fixmap")
Fixes: 50e63dd8ed92 ("riscv: fix reserved memory setup")
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/all/f8e67f82-103d-156c-deb0-d6d6e2756f5e@microchip.com/
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230329081932.79831-2-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver core: Don't require dynamic_debug for initcall_debug probe timing

commit e2f06aa885081e1391916367f53bad984714b4db upstream.

Don't require the use of dynamic debug (or modification of the kernel to
add a #define DEBUG to the top of this file) to get the printk message
about driver probe timing. This printk is only emitted when
initcall_debug is enabled on the kernel commandline, and it isn't
immediately obvious that you have to do something else to debug boot
timing issues related to driver probe. Add a comment too so it doesn't
get converted back to pr_debug().

Fixes: eb7fbc9fb118 ("driver core: Add missing '\n' in log messages")
Cc: stable <stable@kernel.org>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Brian Norris <briannorris@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230412225842.3196599-1-swboyd@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add UNISOC vendor and TOZED LT70C product

commit a095edfc15f0832e046ae23964e249ef5c95af87 upstream.

Add UNISOC vendor ID and TOZED LT70-C modem which is based from UNISOC
SL8563. The modem supports the NCM mode. Interface 0 is used for running
the AT commands. Interface 12 is the ADB interface.

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1782 ProdID=4055 Rev=04.04
S:  Manufacturer=Unisoc Phone
S:  Product=Unisoc Phone
S:  SerialNumber=<redacted>
C:  #Ifs=14 Cfg#= 1 Atr=c0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm
E:  Ad=82(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#=10 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#=11 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#=12 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#=13 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm
E:  Ad=84(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm
E:  Ad=86(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 6 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm
E:  Ad=88(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 7 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230417152003.243248-1-arinc.unal@arinc9.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix uninitialized variable warnings

commit 8ba7d5f5ba931be68a94b8c91bcced1622934e7a upstream.

There are some warnings on older compilers (gcc 10, 7) or non-x86_64
architectures (aarch64).  As btrfs wants to enable -Wmaybe-uninitialized
by default, fix the warnings even though it's not necessary on recent
compilers (gcc 12+).

../fs/btrfs/volumes.c: In function ‘btrfs_init_new_device’:
../fs/btrfs/volumes.c:2703:3: error: ‘seed_devices’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
 2703 |   btrfs_setup_sprout(fs_info, seed_devices);
      |   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

../fs/btrfs/send.c: In function ‘get_cur_inode_state’:
../include/linux/compiler.h:70:32: error: ‘right_gen’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
   70 |   (__if_trace.miss_hit[1]++,1) :  \
      |                                ^
../fs/btrfs/send.c:1878:6: note: ‘right_gen’ was declared here
 1878 |  u64 right_gen;
      |      ^~~~~~~~~

Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Cc: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bluetooth: Perform careful capability checks in hci_sock_ioctl()

commit 25c150ac103a4ebeed0319994c742a90634ddf18 upstream.

Previously, capability was checked using capable(), which verified that the
caller of the ioctl system call had the required capability. In addition,
the result of the check would be stored in the HCI_SOCK_TRUSTED flag,
making it persistent for the socket.

However, malicious programs can abuse this approach by deliberately sharing
an HCI socket with a privileged task. The HCI socket will be marked as
trusted when the privileged task occasionally makes an ioctl call.

This problem can be solved by using sk_capable() to check capability, which
ensures that not only the current task but also the socket opener has the
specified capability, thus reducing the risk of privilege escalation
through the previously identified vulnerability.

Cc: stable@vger.kernel.org
Fixes: f81f5b2db869 ("Bluetooth: Send control open and close messages for HCI raw sockets")
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xNU

commit 782eea0c89f7d071d6b56ecfa1b8b0c81164b9be upstream.

commit 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
changed the policy such that I2C touchpads may be able to wake up the
system by default if the system is configured as such.

However on Clevo NL5xNU there is a mistake in the ACPI tables that the
TP_ATTN# signal connected to GPIO 9 is configured as ActiveLow and level
triggered but connected to a pull up. As soon as the system suspends the
touchpad loses power and then the system wakes up.

To avoid this problem, introduce a quirk for this model that will prevent
the wakeup capability for being set for GPIO 9.

This patch is analoge to a very similar patch for NL5xRU, just the DMI
string changed.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/fb-helper: set x/yres_virtual in drm_fb_helper_check_var

commit 1935f0deb6116dd785ea64d8035eab0ff441255b upstream.

Drivers are supposed to fix this up if needed if they don't outright
reject it. Uncovered by 6c11df58fd1a ("fbmem: Check virtual screen
sizes in fb_set_var()").

Reported-by: syzbot+20dcf81733d43ddff661@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=c5faf983bfa4a607de530cd3bb008888bf06cefc
Cc: stable@vger.kernel.org # v5.4+
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230404194038.472803-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: brcmfmac: slab-out-of-bounds read in brcmf_get_assoc_ies()

commit 0da40e018fd034d87c9460123fa7f897b69fdee7 upstream.

Fix a slab-out-of-bounds read that occurs in kmemdup() called from
brcmf_get_assoc_ies().
The bug could occur when assoc_info->req_len, data from a URB provided
by a USB device, is bigger than the size of buffer which is defined as
WL_EXTRA_BUF_MAX.

Add the size check for req_len/resp_len of assoc_info.

Found by a modified version of syzkaller.

[   46.592467][    T7] ==================================================================
[   46.594687][    T7] BUG: KASAN: slab-out-of-bounds in kmemdup+0x3e/0x50
[   46.596572][    T7] Read of size 3014656 at addr ffff888019442000 by task kworker/0:1/7
[   46.598575][    T7]
[   46.599157][    T7] CPU: 0 PID: 7 Comm: kworker/0:1 Tainted: G           O      5.14.0+ #145
[   46.601333][    T7] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[   46.604360][    T7] Workqueue: events brcmf_fweh_event_worker
[   46.605943][    T7] Call Trace:
[   46.606584][    T7]  dump_stack_lvl+0x8e/0xd1
[   46.607446][    T7]  print_address_description.constprop.0.cold+0x93/0x334
[   46.608610][    T7]  ? kmemdup+0x3e/0x50
[   46.609341][    T7]  kasan_report.cold+0x79/0xd5
[   46.610151][    T7]  ? kmemdup+0x3e/0x50
[   46.610796][    T7]  kasan_check_range+0x14e/0x1b0
[   46.611691][    T7]  memcpy+0x20/0x60
[   46.612323][    T7]  kmemdup+0x3e/0x50
[   46.612987][    T7]  brcmf_get_assoc_ies+0x967/0xf60
[   46.613904][    T7]  ? brcmf_notify_vif_event+0x3d0/0x3d0
[   46.614831][    T7]  ? lock_chain_count+0x20/0x20
[   46.615683][    T7]  ? mark_lock.part.0+0xfc/0x2770
[   46.616552][    T7]  ? lock_chain_count+0x20/0x20
[   46.617409][    T7]  ? mark_lock.part.0+0xfc/0x2770
[   46.618244][    T7]  ? lock_chain_count+0x20/0x20
[   46.619024][    T7]  brcmf_bss_connect_done.constprop.0+0x241/0x2e0
[   46.620019][    T7]  ? brcmf_parse_configure_security.isra.0+0x2a0/0x2a0
[   46.620818][    T7]  ? __lock_acquire+0x181f/0x5790
[   46.621462][    T7]  brcmf_notify_connect_status+0x448/0x1950
[   46.622134][    T7]  ? rcu_read_lock_bh_held+0xb0/0xb0
[   46.622736][    T7]  ? brcmf_cfg80211_join_ibss+0x7b0/0x7b0
[   46.623390][    T7]  ? find_held_lock+0x2d/0x110
[   46.623962][    T7]  ? brcmf_fweh_event_worker+0x19f/0xc60
[   46.624603][    T7]  ? mark_held_locks+0x9f/0xe0
[   46.625145][    T7]  ? lockdep_hardirqs_on_prepare+0x3e0/0x3e0
[   46.625871][    T7]  ? brcmf_cfg80211_join_ibss+0x7b0/0x7b0
[   46.626545][    T7]  brcmf_fweh_call_event_handler.isra.0+0x90/0x100
[   46.627338][    T7]  brcmf_fweh_event_worker+0x557/0xc60
[   46.627962][    T7]  ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100
[   46.628736][    T7]  ? rcu_read_lock_sched_held+0xa1/0xd0
[   46.629396][    T7]  ? rcu_read_lock_bh_held+0xb0/0xb0
[   46.629970][    T7]  ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[   46.630649][    T7]  process_one_work+0x92b/0x1460
[   46.631205][    T7]  ? pwq_dec_nr_in_flight+0x330/0x330
[   46.631821][    T7]  ? rwlock_bug.part.0+0x90/0x90
[   46.632347][    T7]  worker_thread+0x95/0xe00
[   46.632832][    T7]  ? __kthread_parkme+0x115/0x1e0
[   46.633393][    T7]  ? process_one_work+0x1460/0x1460
[   46.633957][    T7]  kthread+0x3a1/0x480
[   46.634369][    T7]  ? set_kthread_struct+0x120/0x120
[   46.634933][    T7]  ret_from_fork+0x1f/0x30
[   46.635431][    T7]
[   46.635687][    T7] Allocated by task 7:
[   46.636151][    T7]  kasan_save_stack+0x1b/0x40
[   46.636628][    T7]  __kasan_kmalloc+0x7c/0x90
[   46.637108][    T7]  kmem_cache_alloc_trace+0x19e/0x330
[   46.637696][    T7]  brcmf_cfg80211_attach+0x4a0/0x4040
[   46.638275][    T7]  brcmf_attach+0x389/0xd40
[   46.638739][    T7]  brcmf_usb_probe+0x12de/0x1690
[   46.639279][    T7]  usb_probe_interface+0x2aa/0x760
[   46.639820][    T7]  really_probe+0x205/0xb70
[   46.640342][    T7]  __driver_probe_device+0x311/0x4b0
[   46.640876][    T7]  driver_probe_device+0x4e/0x150
[   46.641445][    T7]  __device_attach_driver+0x1cc/0x2a0
[   46.642000][    T7]  bus_for_each_drv+0x156/0x1d0
[   46.642543][    T7]  __device_attach+0x23f/0x3a0
[   46.643065][    T7]  bus_probe_device+0x1da/0x290
[   46.643644][    T7]  device_add+0xb7b/0x1eb0
[   46.644130][    T7]  usb_set_configuration+0xf59/0x16f0
[   46.644720][    T7]  usb_generic_driver_probe+0x82/0xa0
[   46.645295][    T7]  usb_probe_device+0xbb/0x250
[   46.645786][    T7]  really_probe+0x205/0xb70
[   46.646258][    T7]  __driver_probe_device+0x311/0x4b0
[   46.646804][    T7]  driver_probe_device+0x4e/0x150
[   46.647387][    T7]  __device_attach_driver+0x1cc/0x2a0
[   46.647926][    T7]  bus_for_each_drv+0x156/0x1d0
[   46.648454][    T7]  __device_attach+0x23f/0x3a0
[   46.648939][    T7]  bus_probe_device+0x1da/0x290
[   46.649478][    T7]  device_add+0xb7b/0x1eb0
[   46.649936][    T7]  usb_new_device.cold+0x49c/0x1029
[   46.650526][    T7]  hub_event+0x1c98/0x3950
[   46.650975][    T7]  process_one_work+0x92b/0x1460
[   46.651535][    T7]  worker_thread+0x95/0xe00
[   46.651991][    T7]  kthread+0x3a1/0x480
[   46.652413][    T7]  ret_from_fork+0x1f/0x30
[   46.652885][    T7]
[   46.653131][    T7] The buggy address belongs to the object at ffff888019442000
[   46.653131][    T7]  which belongs to the cache kmalloc-2k of size 2048
[   46.654669][    T7] The buggy address is located 0 bytes inside of
[   46.654669][    T7]  2048-byte region [ffff888019442000, ffff888019442800)
[   46.656137][    T7] The buggy address belongs to the page:
[   46.656720][    T7] page:ffffea0000651000 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x19440
[   46.657792][    T7] head:ffffea0000651000 order:3 compound_mapcount:0 compound_pincount:0
[   46.658673][    T7] flags: 0x100000000010200(slab|head|node=0|zone=1)
[   46.659422][    T7] raw: 0100000000010200 0000000000000000 dead000000000122 ffff888100042000
[   46.660363][    T7] raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000
[   46.661236][    T7] page dumped because: kasan: bad access detected
[   46.661956][    T7] page_owner tracks the page as allocated
[   46.662588][    T7] page last allocated via order 3, migratetype Unmovable, gfp_mask 0x52a20(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP), pid 7, ts 31136961085, free_ts 0
[   46.664271][    T7]  prep_new_page+0x1aa/0x240
[   46.664763][    T7]  get_page_from_freelist+0x159a/0x27c0
[   46.665340][    T7]  __alloc_pages+0x2da/0x6a0
[   46.665847][    T7]  alloc_pages+0xec/0x1e0
[   46.666308][    T7]  allocate_slab+0x380/0x4e0
[   46.666770][    T7]  ___slab_alloc+0x5bc/0x940
[   46.667264][    T7]  __slab_alloc+0x6d/0x80
[   46.667712][    T7]  kmem_cache_alloc_trace+0x30a/0x330
[   46.668299][    T7]  brcmf_usbdev_qinit.constprop.0+0x50/0x470
[   46.668885][    T7]  brcmf_usb_probe+0xc97/0x1690
[   46.669438][    T7]  usb_probe_interface+0x2aa/0x760
[   46.669988][    T7]  really_probe+0x205/0xb70
[   46.670487][    T7]  __driver_probe_device+0x311/0x4b0
[   46.671031][    T7]  driver_probe_device+0x4e/0x150
[   46.671604][    T7]  __device_attach_driver+0x1cc/0x2a0
[   46.672192][    T7]  bus_for_each_drv+0x156/0x1d0
[   46.672739][    T7] page_owner free stack trace missing
[   46.673335][    T7]
[   46.673620][    T7] Memory state around the buggy address:
[   46.674213][    T7]  ffff888019442700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   46.675083][    T7]  ffff888019442780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   46.675994][    T7] >ffff888019442800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   46.676875][    T7]                    ^
[   46.677323][    T7]  ffff888019442880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   46.678190][    T7]  ffff888019442900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   46.679052][    T7] ==================================================================
[   46.679945][    T7] Disabling lock debugging due to kernel taint
[   46.680725][    T7] Kernel panic - not syncing:

Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230309104457.22628-1-jisoo.jang@yonsei.ac.kr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: fix accept vs worker race

commit 63740448a32eb662e05894425b47bcc5814136f4 upstream.

The mptcp worker and mptcp_accept() can race, as reported by Christoph:

refcount_t: addition on 0; use-after-free.
WARNING: CPU: 1 PID: 14351 at lib/refcount.c:25 refcount_warn_saturate+0x105/0x1b0 lib/refcount.c:25
Modules linked in:
CPU: 1 PID: 14351 Comm: syz-executor.2 Not tainted 6.3.0-rc1-gde5e8fd0123c #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:refcount_warn_saturate+0x105/0x1b0 lib/refcount.c:25
Code: 02 31 ff 89 de e8 1b f0 a7 ff 84 db 0f 85 6e ff ff ff e8 3e f5 a7 ff 48 c7 c7 d8 c7 34 83 c6 05 6d 2d 0f 02 01 e8 cb 3d 90 ff <0f> 0b e9 4f ff ff ff e8 1f f5 a7 ff 0f b6 1d 54 2d 0f 02 31 ff 89
RSP: 0018:ffffc90000a47bf8 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88802eae98c0 RSI: ffffffff81097d4f RDI: 0000000000000001
RBP: ffff88802e712180 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: ffff88802eaea148 R12: ffff88802e712100
R13: ffff88802e712a88 R14: ffff888005cb93a8 R15: ffff88802e712a88
FS:  0000000000000000(0000) GS:ffff88803ed00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f277fd89120 CR3: 0000000035486002 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 __refcount_add include/linux/refcount.h:199 [inline]
 __refcount_inc include/linux/refcount.h:250 [inline]
 refcount_inc include/linux/refcount.h:267 [inline]
 sock_hold include/net/sock.h:775 [inline]
 __mptcp_close+0x4c6/0x4d0 net/mptcp/protocol.c:3051
 mptcp_close+0x24/0xe0 net/mptcp/protocol.c:3072
 inet_release+0x56/0xa0 net/ipv4/af_inet.c:429
 __sock_release+0x51/0xf0 net/socket.c:653
 sock_close+0x18/0x20 net/socket.c:1395
 __fput+0x113/0x430 fs/file_table.c:321
 task_work_run+0x96/0x100 kernel/task_work.c:179
 exit_task_work include/linux/task_work.h:38 [inline]
 do_exit+0x4fc/0x10c0 kernel/exit.c:869
 do_group_exit+0x51/0xf0 kernel/exit.c:1019
 get_signal+0x12b0/0x1390 kernel/signal.c:2859
 arch_do_signal_or_restart+0x25/0x260 arch/x86/kernel/signal.c:306
 exit_to_user_mode_loop kernel/entry/common.c:168 [inline]
 exit_to_user_mode_prepare+0x131/0x1a0 kernel/entry/common.c:203
 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
 syscall_exit_to_user_mode+0x19/0x40 kernel/entry/common.c:296
 do_syscall_64+0x46/0x90 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7fec4b4926a9
Code: Unable to access opcode bytes at 0x7fec4b49267f.
RSP: 002b:00007fec49f9dd78 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: fffffffffffffe00 RBX: 00000000006bc058 RCX: 00007fec4b4926a9
RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00000000006bc058
RBP: 00000000006bc050 R08: 00000000007df998 R09: 00000000007df998
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006bc05c
R13: fffffffffffffea8 R14: 000000000000000b R15: 000000000001fe40
 </TASK>

The root cause is that the worker can force fallback to TCP the first
mptcp subflow, actually deleting the unaccepted msk socket.

We can explicitly prevent the race delaying the unaccepted msk deletion
at listener shutdown time. In case the closed subflow is later accepted,
just drop the mptcp context and let the user-space deal with the
paired mptcp socket.

Fixes: b6985b9b8295 ("mptcp: use the workqueue to destroy unaccepted sockets")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/375
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: stops worker on unaccepted sockets at listener close

commit 2a6a870e44dd88f1a6a2893c65ef756a9edfb4c7 upstream.

This is a partial revert of the blamed commit, with a relevant
change: mptcp_subflow_queue_clean() now just change the msk
socket status and stop the worker, so that the UaF issue addressed
by the blamed commit is not re-introduced.

The above prevents the mptcp worker from running concurrently with
inet_csk_listen_stop(), as such race would trigger a warning, as
reported by Christoph:

RSP: 002b:00007f784fe09cd8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
WARNING: CPU: 0 PID: 25807 at net/ipv4/inet_connection_sock.c:1387 inet_csk_listen_stop+0x664/0x870 net/ipv4/inet_connection_sock.c:1387
RAX: ffffffffffffffda RBX: 00000000006bc050 RCX: 00007f7850afd6a9
RDX: 0000000000000000 RSI: 0000000020000340 RDI: 0000000000000004
Modules linked in:
RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006bc05c
R13: fffffffffffffea8 R14: 00000000006bc050 R15: 000000000001fe40

 </TASK>
CPU: 0 PID: 25807 Comm: syz-executor.7 Not tainted 6.2.0-g778e54711659 #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:inet_csk_listen_stop+0x664/0x870 net/ipv4/inet_connection_sock.c:1387
RAX: 0000000000000000 RBX: ffff888100dfbd40 RCX: 0000000000000000
RDX: ffff8881363aab80 RSI: ffffffff81c494f4 RDI: 0000000000000005
RBP: ffff888126dad080 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: ffff888100dfe040
R13: 0000000000000001 R14: 0000000000000000 R15: ffff888100dfbdd8
FS:  00007f7850a2c800(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32d26000 CR3: 000000012fdd8006 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <TASK>
 __tcp_close+0x5b2/0x620 net/ipv4/tcp.c:2875
 __mptcp_close_ssk+0x145/0x3d0 net/mptcp/protocol.c:2427
 mptcp_destroy_common+0x8a/0x1c0 net/mptcp/protocol.c:3277
 mptcp_destroy+0x41/0x60 net/mptcp/protocol.c:3304
 __mptcp_destroy_sock+0x56/0x140 net/mptcp/protocol.c:2965
 __mptcp_close+0x38f/0x4a0 net/mptcp/protocol.c:3057
 mptcp_close+0x24/0xe0 net/mptcp/protocol.c:3072
 inet_release+0x53/0xa0 net/ipv4/af_inet.c:429
 __sock_release+0x4e/0xf0 net/socket.c:651
 sock_close+0x15/0x20 net/socket.c:1393
 __fput+0xff/0x420 fs/file_table.c:321
 task_work_run+0x8b/0xe0 kernel/task_work.c:179
 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
 exit_to_user_mode_prepare+0x113/0x120 kernel/entry/common.c:203
 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
 syscall_exit_to_user_mode+0x1d/0x40 kernel/entry/common.c:296
 do_syscall_64+0x46/0x90 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f7850af70dc
RAX: 0000000000000000 RBX: 0000000000000004 RCX: 00007f7850af70dc
RDX: 00007f7850a2c800 RSI: 0000000000000002 RDI: 0000000000000003
RBP: 00000000006bd980 R08: 0000000000000000 R09: 00000000000018a0
R10: 00000000316338a4 R11: 0000000000000293 R12: 0000000000211e31
R13: 00000000006bc05c R14: 00007f785062c000 R15: 0000000000211af0

Fixes: 0a3f4f1f9c27 ("mptcp: fix UaF in listener shutdown")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/371
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/mempolicy: fix use-after-free of VMA iterator

commit f4e9e0e69468583c2c6d9d5c7bfc975e292bf188 upstream.

set_mempolicy_home_node() iterates over a list of VMAs and calls
mbind_range() on each VMA, which also iterates over the singular list of
the VMA passed in and potentially splits the VMA.  Since the VMA iterator
is not passed through, set_mempolicy_home_node() may now point to a stale
node in the VMA tree.  This can result in a UAF as reported by syzbot.

Avoid the stale maple tree node by passing the VMA iterator through to the
underlying call to split_vma().

mbind_range() is also overly complicated, since there are two calling
functions and one already handles iterating over the VMAs.  Simplify
mbind_range() to only handle merging and splitting of the VMAs.

Align the new loop in do_mbind() and existing loop in
set_mempolicy_home_node() to use the reduced mbind_range() function.  This
allows for a single location of the range calculation and avoids
constantly looking up the previous VMA (since this is a loop over the
VMAs).

Link: https://lore.kernel.org/linux-mm/000000000000c93feb05f87e24ad@google.com/
Fixes: 66850be55e8e ("mm/mempolicy: use vma iterator & maple state instead of vma linked list")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: syzbot+a7c1ec5b1d71ceaa5186@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/20230410152205.2294819-1-Liam.Howlett@oracle.com
Tested-by: syzbot+a7c1ec5b1d71ceaa5186@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: Retry fault if vma_lookup() results become invalid

commit 13ec9308a85702af7c31f3638a2720863848a7f2 upstream.

Read mmu_invalidate_seq before dropping the mmap_lock so that KVM can
detect if the results of vma_lookup() (e.g. vma_shift) become stale
before it acquires kvm->mmu_lock. This fixes a theoretical bug where a
VMA could be changed by userspace after vma_lookup() and before KVM
reads the mmu_invalidate_seq, causing KVM to install page table entries
based on a (possibly) no-longer-valid vma_shift.

Re-order the MMU cache top-up to earlier in user_mem_abort() so that it
is not done after KVM has read mmu_invalidate_seq (i.e. so as to avoid
inducing spurious fault retries).

This bug has existed since KVM/ARM's inception. It's unlikely that any
sane userspace currently modifies VMAs in such a way as to trigger this
race. And even with directed testing I was unable to reproduce it. But a
sufficiently motivated host userspace might be able to exploit this
race.

Fixes: 94f8e6418d39 ("KVM: ARM: Handle guest faults in KVM")
Cc: stable@vger.kernel.org
Reported-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230313235454.2964067-1-dmatlack@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
[will: Use FSC_PERM instead of ESR_ELx_FSC_PERM]
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: phy-brcm-usb: Utilize platform_get_irq_byname_optional()

commit 53bffe0055741440a6c91abb80bad1c62ea443e3 upstream.

The wake-up interrupt lines are entirely optional, avoid printing
messages that interrupts were not found by switching to the _optional
variant.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Justin Chen <justinpopo6@gmail.com>
Link: https://lore.kernel.org/r/20221026224450.2958762-1-f.fainelli@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

um: Only disable SSE on clang to work around old GCC bugs

commit a3046a618a284579d1189af8711765f553eed707 upstream.

As part of the Rust support for UML, we disable SSE (and similar flags)
to match the normal x86 builds. This both makes sense (we ideally want a
similar configuration to x86), and works around a crash bug with SSE
generation under Rust with LLVM.

However, this breaks compiling stdlib.h under gcc < 11, as the x86_64
ABI requires floating-point return values be stored in an SSE register.
gcc 11 fixes this by only doing register allocation when a function is
actually used, and since we never use atof(), it shouldn't be a problem:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99652

Nevertheless, only disable SSE on clang setups, as that's a simple way
of working around everyone's bugs.

Fixes: 884981867947 ("rust: arch/um: Disable FP/SIMD instruction to match x86")
Reported-by: Roberto Sassu <roberto.sassu@huaweicloud.com>
Link: https://lore.kernel.org/linux-um/6df2ecef9011d85654a82acd607fdcbc93ad593c.camel@huaweicloud.com/
Tested-by: Roberto Sassu <roberto.sassu@huaweicloud.com>
Tested-by: SeongJae Park <sj@kernel.org>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Tested-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 6.1.26

Link: https://lore.kernel.org/r/20230424131133.829259077@linuxfoundation.org
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Markus Reichelt <lkt+2023@mareichelt.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Chris Paterson (CIP) <chris.paterson2@renesas.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASN.1: Fix check for strdup() success

commit 5a43001c01691dcbd396541e6faa2c0077378f48 upstream.

It seems there is a misprint in the check of strdup() return code that
can lead to NULL pointer dereference.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 4520c6a49af8 ("X.509: Add simple ASN.1 grammar compiler")
Signed-off-by: Ekaterina Orlova <vorobushek.ok@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: keyrings@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Link: https://lore.kernel.org/r/20230315172130.140-1-vorobushek.ok@gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: fsl_sai: Fix pins setting for i.MX8QM platform

commit 238787157d83969e5149c8e99787d5d90e85fbe5 upstream.

SAI on i.MX8QM platform supports the data lines up to 4. So the pins
setting should be corrected to 4.

Fixes: eba0f0077519 ("ASoC: fsl_sai: Enable combine mode soft")
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/20230418094259.4150771-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: fsl_asrc_dma: fix potential null-ptr-deref

commit 86a24e99c97234f87d9f70b528a691150e145197 upstream.

dma_request_slave_channel() may return NULL which will lead to
NULL pointer dereference error in 'tmp_chan->private'.

Correct this behaviour by, first, switching from deprecated function
dma_request_slave_channel() to dma_request_chan(). Secondly, enable
sanity check for the resuling value of dma_request_chan().
Also, fix description that follows the enacted changes and that
concerns the use of dma_request_slave_channel().

Fixes: 706e2c881158 ("ASoC: fsl_asrc_dma: Reuse the dma channel if available in Back-End")
Co-developed-by: Natalia Petrova <n.petrova@fintech.ru>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230417133242.53339-1-n.zhandarovich@fintech.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: SOF: pm: Tear down pipelines only if DSP was active

commit 0b186bb06198653d74a141902a7739e0bde20cf4 upstream.

With PCI if the device was suspended it is brought back to full
power and then suspended again.

This doesn't happen when device is described via DT.

We need to make sure that we tear down pipelines only if the device
was previously active (thus the pipelines were setup).

Otherwise, we can break the use_count:

[  219.009743] sof-audio-of-imx8m 3b6e8000.dsp:
sof_ipc3_tear_down_all_pipelines: widget PIPELINE.2.SAI3.IN is still in use: count -1

and after this everything stops working.

Fixes: d185e0689abc ("ASoC: SOF: pm: Always tear down pipelines before DSP suspend")
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20230405092655.19587-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/page_alloc: fix potential deadlock on zonelist_update_seq seqlock

commit 1007843a91909a4995ee78a538f62d8665705b66 upstream.

syzbot is reporting circular locking dependency which involves
zonelist_update_seq seqlock [1], for this lock is checked by memory
allocation requests which do not need to be retried.

One deadlock scenario is kmalloc(GFP_ATOMIC) from an interrupt handler.

  CPU0
  ----
  __build_all_zonelists() {
    write_seqlock(&zonelist_update_seq); // makes zonelist_update_seq.seqcount odd
    // e.g. timer interrupt handler runs at this moment
      some_timer_func() {
        kmalloc(GFP_ATOMIC) {
          __alloc_pages_slowpath() {
            read_seqbegin(&zonelist_update_seq) {
              // spins forever because zonelist_update_seq.seqcount is odd
            }
          }
        }
      }
    // e.g. timer interrupt handler finishes
    write_sequnlock(&zonelist_update_seq); // makes zonelist_update_seq.seqcount even
  }

This deadlock scenario can be easily eliminated by not calling
read_seqbegin(&zonelist_update_seq) from !__GFP_DIRECT_RECLAIM allocation
requests, for retry is applicable to only __GFP_DIRECT_RECLAIM allocation
requests.  But Michal Hocko does not know whether we should go with this
approach.

Another deadlock scenario which syzbot is reporting is a race between
kmalloc(GFP_ATOMIC) from tty_insert_flip_string_and_push_buffer() with
port->lock held and printk() from __build_all_zonelists() with
zonelist_update_seq held.

  CPU0                                   CPU1
  ----                                   ----
  pty_write() {
    tty_insert_flip_string_and_push_buffer() {
                                         __build_all_zonelists() {
                                           write_seqlock(&zonelist_update_seq);
                                           build_zonelists() {
                                             printk() {
                                               vprintk() {
                                                 vprintk_default() {
                                                   vprintk_emit() {
                                                     console_unlock() {
                                                       console_flush_all() {
                                                         console_emit_next_record() {
                                                           con->write() = serial8250_console_write() {
      spin_lock_irqsave(&port->lock, flags);
      tty_insert_flip_string() {
        tty_insert_flip_string_fixed_flag() {
          __tty_buffer_request_room() {
            tty_buffer_alloc() {
              kmalloc(GFP_ATOMIC | __GFP_NOWARN) {
                __alloc_pages_slowpath() {
                  zonelist_iter_begin() {
                    read_seqbegin(&zonelist_update_seq); // spins forever because zonelist_update_seq.seqcount is odd
                                                             spin_lock_irqsave(&port->lock, flags); // spins forever because port->lock is held
                    }
                  }
                }
              }
            }
          }
        }
      }
      spin_unlock_irqrestore(&port->lock, flags);
                                                             // message is printed to console
                                                             spin_unlock_irqrestore(&port->lock, flags);
                                                           }
                                                         }
                                                       }
                                                     }
                                                   }
                                                 }
                                               }
                                             }
                                           }
                                           write_sequnlock(&zonelist_update_seq);
                                         }
    }
  }

This deadlock scenario can be eliminated by

  preventing interrupt context from calling kmalloc(GFP_ATOMIC)

and

  preventing printk() from calling console_flush_all()

while zonelist_update_seq.seqcount is odd.

Since Petr Mladek thinks that __build_all_zonelists() can become a
candidate for deferring printk() [2], let's address this problem by

  disabling local interrupts in order to avoid kmalloc(GFP_ATOMIC)

and

  disabling synchronous printk() in order to avoid console_flush_all()

.

As a side effect of minimizing duration of zonelist_update_seq.seqcount
being odd by disabling synchronous printk(), latency at
read_seqbegin(&zonelist_update_seq) for both !__GFP_DIRECT_RECLAIM and
__GFP_DIRECT_RECLAIM allocation requests will be reduced.  Although, from
lockdep perspective, not calling read_seqbegin(&zonelist_update_seq) (i.e.
do not record unnecessary locking dependency) from interrupt context is
still preferable, even if we don't allow calling kmalloc(GFP_ATOMIC)
inside
write_seqlock(&zonelist_update_seq)/write_sequnlock(&zonelist_update_seq)
section...

Link: https://lkml.kernel.org/r/8796b95c-3da3-5885-fddd-6ef55f30e4d3@I-love.SAKURA.ne.jp
Fixes: 3d36424b3b58 ("mm/page_alloc: fix race condition between build_all_zonelists and page allocation")
Link: https://lkml.kernel.org/r/ZCrs+1cDqPWTDFNM@alley
Reported-by: syzbot <syzbot+223c7461c58c58a4cb10@syzkaller.appspotmail.com>
Link: https://syzkaller.appspot.com/bug?extid=223c7461c58c58a4cb10
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Petr Mladek <pmladek@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Patrick Daly <quic_pdaly@quicinc.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fpga: bridge: properly initialize bridge device before populating children

commit dc70eb868b9cd2ca01313e5a394e6ea001d513e9 upstream.

The current code path can lead to warnings because of uninitialized device,
which contains, as a consequence, uninitialized kobject. The uninitialized
device is passed to of_platform_populate, which will at some point, while
creating child device, try to get a reference on uninitialized parent,
resulting in the following warning:

kobject: '(null)' ((ptrval)): is not initialized, yet kobject_get() is
being called.

The warning is observed after migrating a kernel 5.10.x to 6.1.x.
Reverting commit 0d70af3c2530 ("fpga: bridge: Use standard dev_release for
class driver") seems to remove the warning.
This commit aggregates device_initialize() and device_add() into
device_register() but this new call is done AFTER of_platform_populate

Fixes: 0d70af3c2530 ("fpga: bridge: Use standard dev_release for class driver")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20230404133102.2837535-2-alexis.lothore@bootlin.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: at91-sama5d2_adc: fix an error code in at91_adc_allocate_trigger()

commit 73a428b37b9b538f8f8fe61caa45e7f243bab87c upstream.

The at91_adc_allocate_trigger() function is supposed to return error
pointers.  Returning a NULL will cause an Oops.

Fixes: 5e1a1da0f8c9 ("iio: adc: at91-sama5d2_adc: add hw trigger and buffer support")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/5d728f9d-31d1-410d-a0b3-df6a63a2c8ba@kili.mountain
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: pegasus-notetaker - check pipe type when probing

commit b3d80fd27a3c2d8715a40cbf876139b56195f162 upstream.

Fix WARNING in pegasus_open/usb_submit_urb
Syzbot bug: https://syzkaller.appspot.com/bug?id=bbc107584dcf3262253ce93183e51f3612aaeb13

Warning raised because pegasus_driver submits transfer request for
bogus URB (pipe type does not match endpoint type). Add sanity check at
probe time for pipe value extracted from endpoint descriptor. Probe
will fail if sanity check fails.

Reported-and-tested-by: syzbot+04ee0cb4caccaed12d78@syzkaller.appspotmail.com
Signed-off-by: Soumya Negi <soumya.negi97@gmail.com>
Link: https://lore.kernel.org/r/20230404074145.11523-1-soumya.negi97@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcc: disable '-Warray-bounds' for gcc-13 too

commit 0da6e5fd6c3726723e275603426e09178940dace upstream.

We started disabling '-Warray-bounds' for gcc-12 originally on s390,
because it resulted in some warnings that weren't realistically fixable
(commit 8b202ee21839: "s390: disable -Warray-bounds").

That s390-specific issue was then found to be less common elsewhere, but
generic (see f0be87c42cbd: "gcc-12: disable '-Warray-bounds' universally
for now"), and then later expanded the version check was expanded to
gcc-11 (5a41237ad1d4: "gcc: disable -Warray-bounds for gcc-11 too").

And it turns out that I was much too optimistic in thinking that it's
all going to go away, and here we are with gcc-13 showing all the same
issues.  So instead of expanding this one version at a time, let's just
disable it for gcc-11+, and put an end limit to it only when we actually
find a solution.

Yes, I'm sure some of this is because the kernel just does odd things
(like our "container_of()" use, but also knowingly playing games with
things like linker tables and array layouts).

And yes, some of the warnings are likely signs of real bugs, but when
there are hundreds of false positives, that doesn't really help.

Oh well.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: Call inet6_destroy_sock() via sk->sk_destruct().

commit 6431b0f6ff1633ae598667e4cdd93830074a03e8 upstream.

After commit d38afeec26ed ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.

SCTP sets its own sk->sk_destruct() in the sctp_init_sock(), and
SCTPv6 socket reuses it as the init function.

To call inet6_sock_destruct() from SCTPv6 sk->sk_destruct(), we
set sctp_v6_destruct_sock() in a new init function.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dccp: Call inet6_destroy_sock() via sk->sk_destruct().

commit 1651951ebea54970e0bda60c638fc2eee7a6218f upstream.

After commit d38afeec26ed ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.

DCCP sets its own sk->sk_destruct() in the dccp_init_sock(), and
DCCPv6 socket shares it by calling the same init function via
dccp_v6_init_sock().

To call inet6_sock_destruct() from DCCPv6 sk->sk_destruct(), we
export it and set dccp_v6_sk_destruct() in the init function.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet6: Remove inet6_destroy_sock() in sk->sk_prot->destroy().

commit b5fc29233d28be7a3322848ebe73ac327559cdb9 upstream.

After commit d38afeec26ed ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.

Now we can remove unnecessary inet6_destroy_sock() calls in
sk->sk_prot->destroy().

DCCP and SCTP have their own sk->sk_destruct() function, so we
change them separately in the following patches.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

purgatory: fix disabling debug info

commit d83806c4c0cccc0d6d3c3581a11983a9c186a138 upstream.

Since 32ef9e5054ec, -Wa,-gdwarf-2 is no longer used in KBUILD_AFLAGS.
Instead, it includes -g, the appropriate -gdwarf-* flag, and also the
-Wa versions of both of those if building with Clang and GNU as.  As a
result, debug info was being generated for the purgatory objects, even
though the intention was that it not be.

Fixes: 32ef9e5054ec ("Makefile.debug: re-enable debug info for .S files")
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Cc: stable@vger.kernel.org
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: always revalidate rename target dentry

commit ccc031e26afe60d2a5a3d93dabd9c978210825fb upstream.

The previous commit df8629af2934 ("fuse: always revalidate if exclusive
create") ensures that the dentries are revalidated on O_EXCL creates.  This
commit complements it by also performing revalidation for rename target
dentries.  Otherwise, a rename target file that only exists in kernel
dentry cache but not in the filesystem will result in EEXIST if
RENAME_NOREPLACE flag is used.

Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Signed-off-by: Zhang Tianci <zhangtianci.1997@bytedance.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Yang Bo <yb203166@antfin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Define RUNTIME_DISCARD_EXIT in LD script

commit 6dcbd0a69c84a8ae7a442840a8cf6b1379dc8f16 upstream.

MIPS's exit sections are discarded at runtime as well.

Fixes link error:
`.exit.text' referenced in section `__jump_table' of fs/fuse/inode.o:
defined in discarded section `.exit.text' of fs/fuse/inode.o

Fixes: 99cb0d917ffa ("arch: fix broken BuildID for arm64 and riscv")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: Fix buffer overflow in kvm_arm_set_fw_reg()

commit a25bc8486f9c01c1af6b6c5657234b2eee2c39d6 upstream.

The KVM_REG_SIZE() comes from the ioctl and it can be a power of two
between 0-32768 but if it is more than sizeof(long) this will corrupt
memory.

Fixes: 99adb567632b ("KVM: arm/arm64: Add save/restore support for firmware workaround state")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/4efbab8c-640f-43b2-8ac6-6d68e08280fe@kili.mountain
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: Make vcpu flag updates non-preemptible

commit 35dcb3ac663a16510afc27ba2725d70c15e012a5 upstream.

Per-vcpu flags are updated using a non-atomic RMW operation.
Which means it is possible to get preempted between the read and
write operations.

Another interesting thing to note is that preemption also updates
flags, as we have some flag manipulation in both the load and put
operations.

It is thus possible to lose information communicated by either
load or put, as the preempted flag update will overwrite the flags
when the thread is resumed. This is specially critical if either
load or put has stored information which depends on the physical
CPU the vcpu runs on.

This results in really elusive bugs, and kudos must be given to
Mostafa for the long hours of debugging, and finally spotting
the problem.

Fix it by disabling preemption during the RMW operation, which
ensures that the state stays consistent. Also upgrade vcpu_get_flag
path to use READ_ONCE() to make sure the field is always atomically
accessed.

Fixes: e87abb73e594 ("KVM: arm64: Add helpers to manipulate vcpu flags among a set")
Reported-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230418125737.2327972-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/fair: Fixes for capacity inversion detection

commit: da07d2f9c153e457e845d4dcfdd13568d71d18a4 upstream.

Traversing the Perf Domains requires rcu_read_lock() to be held and is
conditional on sched_energy_enabled(). Ensure right protections applied.

Also skip capacity inversion detection for our own pd; which was an
error.

Fixes: 44c7b80bffc3 ("sched/fair: Detect capacity inversion")
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230112122708.330667-3-qyousef@layalina.io
(cherry picked from commit da07d2f9c153e457e845d4dcfdd13568d71d18a4)
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/fair: Consider capacity inversion in util_fits_cpu()

commit: aa69c36f31aadc1669bfa8a3de6a47b5e6c98ee8 upstream.

We do consider thermal pressure in util_fits_cpu() for uclamp_min only.
With the exception of the biggest cores which by definition are the max
performance point of the system and all tasks by definition should fit.

Even under thermal pressure, the capacity of the biggest CPU is the
highest in the system and should still fit every task. Except when it
reaches capacity inversion point, then this is no longer true.

We can handle this by using the inverted capacity as capacity_orig in
util_fits_cpu(). Which not only addresses the problem above, but also
ensure uclamp_max now considers the inverted capacity. Force fitting
a task when a CPU is in this adverse state will contribute to making the
thermal throttling last longer.

Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-10-qais.yousef@arm.com
(cherry picked from commit aa69c36f31aadc1669bfa8a3de6a47b5e6c98ee8)
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/fair: Detect capacity inversion

commit: 44c7b80bffc3a657a36857098d5d9c49d94e652b upstream.

Check each performance domain to see if thermal pressure is causing its
capacity to be lower than another performance domain.

We assume that each performance domain has CPUs with the same
capacities, which is similar to an assumption made in energy_model.c

We also assume that thermal pressure impacts all CPUs in a performance
domain equally.

If there're multiple performance domains with the same capacity_orig, we
will trigger a capacity inversion if the domain is under thermal
pressure.

The new cpu_in_capacity_inversion() should help users to know when
information about capacity_orig are not reliable and can opt in to use
the inverted capacity as the 'actual' capacity_orig.

Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-9-qais.yousef@arm.com
(cherry picked from commit 44c7b80bffc3a657a36857098d5d9c49d94e652b)
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/mmap: regression fix for unmapped_area{_topdown}

commit 58c5d0d6d522112577c7eeb71d382ea642ed7be4 upstream.

The maple tree limits the gap returned to a window that specifically fits
what was asked.  This may not be optimal in the case of switching search
directions or a gap that does not satisfy the requested space for other
reasons.  Fix the search by retrying the operation and limiting the search
window in the rare occasion that a conflict occurs.

Link: https://lkml.kernel.org/r/20230414185919.4175572-1-Liam.Howlett@oracle.com
Fixes: 3499a13168da ("mm/mmap: use maple tree for unmapped_area{_topdown}")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: page_alloc: skip regions with hugetlbfs pages when allocating 1G pages

commit 4d73ba5fa710fe7d432e0b271e6fecd252aef66e upstream.

A bug was reported by Yuanxi Liu where allocating 1G pages at runtime is
taking an excessive amount of time for large amounts of memory.  Further
testing allocating huge pages that the cost is linear i.e.  if allocating
1G pages in batches of 10 then the time to allocate nr_hugepages from
10->20->30->etc increases linearly even though 10 pages are allocated at
each step.  Profiles indicated that much of the time is spent checking the
validity within already existing huge pages and then attempting a
migration that fails after isolating the range, draining pages and a whole
lot of other useless work.

Commit eb14d4eefdc4 ("mm,page_alloc: drop unnecessary checks from
pfn_range_valid_contig") removed two checks, one which ignored huge pages
for contiguous allocations as huge pages can sometimes migrate.  While
there may be value on migrating a 2M page to satisfy a 1G allocation, it's
potentially expensive if the 1G allocation fails and it's pointless to try
moving a 1G page for a new 1G allocation or scan the tail pages for valid
PFNs.

Reintroduce the PageHuge check and assume any contiguous region with
hugetlbfs pages is unsuitable for a new 1G allocation.

The hpagealloc test allocates huge pages in batches and reports the
average latency per page over time.  This test happens just after boot
when fragmentation is not an issue.  Units are in milliseconds.

hpagealloc
                               6.3.0-rc6              6.3.0-rc6              6.3.0-rc6
                                 vanilla   hugeallocrevert-v1r1   hugeallocsimple-v1r2
Min       Latency       26.42 (   0.00%)        5.07 (  80.82%)       18.94 (  28.30%)
1st-qrtle Latency      356.61 (   0.00%)        5.34 (  98.50%)       19.85 (  94.43%)
2nd-qrtle Latency      697.26 (   0.00%)        5.47 (  99.22%)       20.44 (  97.07%)
3rd-qrtle Latency      972.94 (   0.00%)        5.50 (  99.43%)       20.81 (  97.86%)
Max-1     Latency       26.42 (   0.00%)        5.07 (  80.82%)       18.94 (  28.30%)
Max-5     Latency       82.14 (   0.00%)        5.11 (  93.78%)       19.31 (  76.49%)
Max-10    Latency      150.54 (   0.00%)        5.20 (  96.55%)       19.43 (  87.09%)
Max-90    Latency     1164.45 (   0.00%)        5.53 (  99.52%)       20.97 (  98.20%)
Max-95    Latency     1223.06 (   0.00%)        5.55 (  99.55%)       21.06 (  98.28%)
Max-99    Latency     1278.67 (   0.00%)        5.57 (  99.56%)       22.56 (  98.24%)
Max       Latency     1310.90 (   0.00%)        8.06 (  99.39%)       26.62 (  97.97%)
Amean     Latency      678.36 (   0.00%)        5.44 *  99.20%*       20.44 *  96.99%*

                   6.3.0-rc6   6.3.0-rc6   6.3.0-rc6
                     vanilla   revert-v1   hugeallocfix-v2
Duration User           0.28        0.27        0.30
Duration System       808.66       17.77       35.99
Duration Elapsed      830.87       18.08       36.33

The vanilla kernel is poor, taking up to 1.3 second to allocate a huge
page and almost 10 minutes in total to run the test.  Reverting the
problematic commit reduces it to 8ms at worst and the patch takes 26ms.
This patch fixes the main issue with skipping huge pages but leaves the
page_count() out because a page with an elevated count potentially can
migrate.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=217022
Link: https://lkml.kernel.org/r/20230414141429.pwgieuwluxwez3rj@techsingularity.net
Fixes: eb14d4eefdc4 ("mm,page_alloc: drop unnecessary checks from pfn_range_valid_contig")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Yuanxi Liu <y.liu@naruida.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: kmsan: handle alloc failures in kmsan_vmap_pages_range_noflush()

commit 47ebd0310e89c087f56e58c103c44b72a2f6b216 upstream.

As reported by Dipanjan Das, when KMSAN is used together with kernel fault
injection (or, generally, even without the latter), calls to kcalloc() or
__vmap_pages_range_noflush() may fail, leaving the metadata mappings for
the virtual mapping in an inconsistent state.  When these metadata
mappings are accessed later, the kernel crashes.

To address the problem, we return a non-zero error code from
kmsan_vmap_pages_range_noflush() in the case of any allocation/mapping
failure inside it, and make vmap_pages_range_noflush() return an error if
KMSAN fails to allocate the metadata.

This patch also removes KMSAN_WARN_ON() from vmap_pages_range_noflush(),
as these allocation failures are not fatal anymore.

Link: https://lkml.kernel.org/r/20230413131223.4135168-1-glider@google.com
Fixes: b073d7f8aee4 ("mm: kmsan: maintain KMSAN metadata for page operations")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com>
Link: https://lore.kernel.org/linux-mm/CANX2M5ZRrRA64k0hOif02TjmY9kbbO2aCBPyq79es34RXZ=cAw@mail.gmail.com/
Reviewed-by: Marco Elver <elver@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: kmsan: handle alloc failures in kmsan_ioremap_page_range()

commit fdea03e12aa2a44a7bb34144208be97fc25dfd90 upstream.

Similarly to kmsan_vmap_pages_range_noflush(), kmsan_ioremap_page_range()
must also properly handle allocation/mapping failures.  In the case of
such, it must clean up the already created metadata mappings and return an
error code, so that the error can be propagated to ioremap_page_range().
Without doing so, KMSAN may silently fail to bring the metadata for the
page range into a consistent state, which will result in user-visible
crashes when trying to access them.

Link: https://lkml.kernel.org/r/20230413131223.4135168-2-glider@google.com
Fixes: b073d7f8aee4 ("mm: kmsan: maintain KMSAN metadata for page operations")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com>
Link: https://lore.kernel.org/linux-mm/CANX2M5ZRrRA64k0hOif02TjmY9kbbO2aCBPyq79es34RXZ=cAw@mail.gmail.com/
Reviewed-by: Marco Elver <elver@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/huge_memory.c: warn with pr_warn_ratelimited instead of VM_WARN_ON_ONCE_FOLIO

commit 4737edbbdd4958ae29ca6a310a6a2fa4e0684b01 upstream.

split_huge_page_to_list() WARNs when called for huge zero pages, which
sounds to me too harsh because it does not imply a kernel bug, but just
notifies the event to admins.  On the other hand, this is considered as
critical by syzkaller and makes its testing less efficient, which seems to
me harmful.

So replace the VM_WARN_ON_ONCE_FOLIO with pr_warn_ratelimited.

Link: https://lkml.kernel.org/r/20230406082004.2185420-1-naoya.horiguchi@linux.dev
Fixes: 478d134e9506 ("mm/huge_memory: do not overkill when splitting huge_zero_page")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: syzbot+07a218429c8d19b1fb25@syzkaller.appspotmail.com
Link: https://lore.kernel.org/lkml/000000000000a6f34a05e6efcd01@google.com/
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Xu Yu <xuyu@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/khugepaged: check again on anon uffd-wp during isolation

commit dd47ac428c3f5f3bcabe845f36be870fe6c20784 upstream.

Khugepaged collapse an anonymous thp in two rounds of scans.  The 2nd
round done in __collapse_huge_page_isolate() after
hpage_collapse_scan_pmd(), during which all the locks will be released
temporarily.  It means the pgtable can change during this phase before 2nd
round starts.

It's logically possible some ptes got wr-protected during this phase, and
we can errornously collapse a thp without noticing some ptes are
wr-protected by userfault.  e1e267c7928f wanted to avoid it but it only
did that for the 1st phase, not the 2nd phase.

Since __collapse_huge_page_isolate() happens after a round of small page
swapins, we don't need to worry on any !present ptes - if it existed
khugepaged will already bail out.  So we only need to check present ptes
with uffd-wp bit set there.

This is something I found only but never had a reproducer, I thought it
was one caused a bug in Muhammad's recent pagemap new ioctl work, but it
turns out it's not the cause of that but an userspace bug.  However this
seems to still be a real bug even with a very small race window, still
worth to have it fixed and copy stable.

Link: https://lkml.kernel.org/r/20230405155120.3608140-1-peterx@redhat.com
Fixes: e1e267c7928f ("khugepaged: skip collapse if uffd-wp detected")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/userfaultfd: fix uffd-wp handling for THP migration entries

commit 24bf08c4376be417f16ceb609188b16f461b0443 upstream.

Looks like what we fixed for hugetlb in commit 44f86392bdd1 ("mm/hugetlb:
fix uffd-wp handling for migration entries in
hugetlb_change_protection()") similarly applies to THP.

Setting/clearing uffd-wp on THP migration entries is not implemented
properly.  Further, while removing migration PMDs considers the uffd-wp
bit, inserting migration PMDs does not consider the uffd-wp bit.

We have to set/clear independently of the migration entry type in
change_huge_pmd() and properly copy the uffd-wp bit in
set_pmd_migration_entry().

Verified using a simple reproducer that triggers migration of a THP, that
the set_pmd_migration_entry() no longer loses the uffd-wp bit.

Link: https://lkml.kernel.org/r/20230405160236.587705-2-david@redhat.com
Fixes: f45ec5ff16a7 ("userfaultfd: wp: support swap and page migration")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/rockchip: vop2: Use regcache_sync() to fix suspend/resume

commit b63a553e8f5aa6574eeb535a551817a93c426d8c upstream.

afa965a45e01 ("drm/rockchip: vop2: fix suspend/resume") uses
regmap_reinit_cache() to fix the suspend/resume issue with the VOP2
driver. During discussion it came up that we should rather use
regcache_sync() instead. As the original patch is already applied
fix this up in this follow-up patch.

Fixes: afa965a45e01 ("drm/rockchip: vop2: fix suspend/resume")
Cc: stable@vger.kernel.org
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417123747.2179695-1-s.hauer@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/rockchip: vop2: fix suspend/resume

commit afa965a45e01e541cdbe5c8018226eff117610f0 upstream.

During a suspend/resume cycle the VO power domain will be disabled and
the VOP2 registers will reset to their default values. After that the
cached register values will be out of sync and the read/modify/write
operations we do on the window registers will result in bogus values
written. Fix this by re-initializing the register cache each time we
enable the VOP2. With this the VOP2 will show a picture after a
suspend/resume cycle whereas without this the screen stays dark.

Fixes: 604be85547ce4 ("drm/rockchip: Add VOP2 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413144347.3506023-1-s.hauer@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: set dcn315 lb bpp to 48

commit 6d9240c46f7419aa3210353b5f52cc63da5a6440 upstream.

[Why & How]
Fix a typo for dcn315 line buffer bpp.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Fix desktop freezed after gpu-reset

commit c8b5a95b570949536a2b75cd8fc4f1de0bc60629 upstream.

[Why]
After gpu-reset, sometimes the driver fails to enable vblank irq,
causing flip_done timed out and the desktop freezed.

During gpu-reset, we disable and enable vblank irq in dm_suspend() and
dm_resume(). Later on in amdgpu_irq_gpu_reset_resume_helper(), we check
irqs' refcount and decide to enable or disable the irqs again.

However, we have 2 sets of API for controling vblank irq, one is
dm_vblank_get/put() and another is amdgpu_irq_get/put(). Each API has
its own refcount and flag to store the state of vblank irq, and they
are not synchronized.

In drm we use the first API to control vblank irq but in
amdgpu_irq_gpu_reset_resume_helper() we use the second set of API.

The failure happens when vblank irq was enabled by dm_vblank_get()
before gpu-reset, we have vblank->enabled true. However, during
gpu-reset, in amdgpu_irq_gpu_reset_resume_helper() vblank irq's state
checked from amdgpu_irq_update() is DISABLED. So finally it disables
vblank irq again. After gpu-reset, if there is a cursor plane commit,
the driver will try to enable vblank irq by calling drm_vblank_enable(),
but the vblank->enabled is still true, so it fails to turn on vblank
irq and causes flip_done can't be completed in vblank irq handler and
desktop become freezed.

[How]
Combining the 2 vblank control APIs by letting drm's API finally calls
amdgpu_irq's API, so the irq's refcount and state of both APIs can be
synchronized. Also add a check to prevent refcount from being less then
0 in amdgpu_irq_put().

v2:
- Add warning in amdgpu_irq_enable() if the irq is already disabled.
- Call dc_interrupt_set() in dm_set_vblank() to avoid refcount change
  if it is in gpu-reset.

v3:
- Improve commit message and code comments.

Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Fix fast wake AUX sync len

commit e1c71f8f918047ce822dc19b42ab1261ed259fd1 upstream.

Fast wake should use 8 SYNC pulses for the preamble
and 10-16 SYNC pulses for the precharge. Reduce our
fast wake SYNC count to match the maximum value.
We also use the maximum precharge length for normal
AUX transactions.

Cc: stable@vger.kernel.org
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329172434.18744-1-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
(cherry picked from commit 605f7c73133341d4b762cbd9a22174cc22d4c38b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci_am654: Set HIGH_SPEED_ENA for SDR12 and SDR25

commit 2265098fd6a6272fde3fd1be5761f2f5895bd99a upstream.

Timing Information in Datasheet assumes that HIGH_SPEED_ENA=1 should be
set for SDR12 and SDR25 modes. But sdhci_am654 driver clears
HIGH_SPEED_ENA register. Thus, Modify sdhci_am654 to not clear
HIGH_SPEED_ENA (HOST_CONTROL[2]) bit for SDR12 and SDR25 speed modes.

Fixes: e374e87538f4 ("mmc: sdhci_am654: Clear HISPD_ENA in some lower speed modes")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230317092711.660897-1-b-kapoor@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

writeback, cgroup: fix null-ptr-deref write in bdi_split_work_to_wbs

commit 1ba1199ec5747f475538c0d25a32804e5ba1dfde upstream.

KASAN report null-ptr-deref:
==================================================================
BUG: KASAN: null-ptr-deref in bdi_split_work_to_wbs+0x5c5/0x7b0
Write of size 8 at addr 0000000000000000 by task sync/943
CPU: 5 PID: 943 Comm: sync Tainted: 6.3.0-rc5-next-20230406-dirty #461
Call Trace:
 <TASK>
 dump_stack_lvl+0x7f/0xc0
 print_report+0x2ba/0x340
 kasan_report+0xc4/0x120
 kasan_check_range+0x1b7/0x2e0
 __kasan_check_write+0x24/0x40
 bdi_split_work_to_wbs+0x5c5/0x7b0
 sync_inodes_sb+0x195/0x630
 sync_inodes_one_sb+0x3a/0x50
 iterate_supers+0x106/0x1b0
 ksys_sync+0x98/0x160
[...]
==================================================================

The race that causes the above issue is as follows:

           cpu1                     cpu2
-------------------------|-------------------------
inode_switch_wbs
 INIT_WORK(&isw->work, inode_switch_wbs_work_fn)
 queue_rcu_work(isw_wq, &isw->work)
 // queue_work async
  inode_switch_wbs_work_fn
   wb_put_many(old_wb, nr_switched)
    percpu_ref_put_many
     ref->data->release(ref)
     cgwb_release
      queue_work(cgwb_release_wq, &wb->release_work)
      // queue_work async
       &wb->release_work
       cgwb_release_workfn
                            ksys_sync
                             iterate_supers
                              sync_inodes_one_sb
                               sync_inodes_sb
                                bdi_split_work_to_wbs
                                 kmalloc(sizeof(*work), GFP_ATOMIC)
                                 // alloc memory failed
        percpu_ref_exit
         ref->data = NULL
         kfree(data)
                                 wb_get(wb)
                                  percpu_ref_get(&wb->refcnt)
                                   percpu_ref_get_many(ref, 1)
                                    atomic_long_add(nr, &ref->data->count)
                                     atomic64_add(i, v)
                                     // trigger null-ptr-deref

bdi_split_work_to_wbs() traverses &bdi->wb_list to split work into all
wbs.  If the allocation of new work fails, the on-stack fallback will be
used and the reference count of the current wb is increased afterwards.
If cgroup writeback membership switches occur before getting the reference
count and the current wb is released as old_wd, then calling wb_get() or
wb_put() will trigger the null pointer dereference above.

This issue was introduced in v4.3-rc7 (see fix tag1).  Both
sync_inodes_sb() and __writeback_inodes_sb_nr() calls to
bdi_split_work_to_wbs() can trigger this issue.  For scenarios called via
sync_inodes_sb(), originally commit 7fc5854f8c6e ("writeback: synchronize
sync(2) against cgroup writeback membership switches") reduced the
possibility of the issue by adding wb_switch_rwsem, but in v5.14-rc1 (see
fix tag2) removed the "inode_io_list_del_locked(inode, old_wb)" from
inode_switch_wbs_work_fn() so that wb->state contains WB_has_dirty_io,
thus old_wb is not skipped when traversing wbs in bdi_split_work_to_wbs(),
and the issue becomes easily reproducible again.

To solve this problem, percpu_ref_exit() is called under RCU protection to
avoid race between cgwb_release_workfn() and bdi_split_work_to_wbs().
Moreover, replace wb_get() with wb_tryget() in bdi_split_work_to_wbs(),
and skip the current wb if wb_tryget() fails because the wb has already
been shutdown.

Link: https://lkml.kernel.org/r/20230410130826.1492525-1-libaokun1@huawei.com
Fixes: b817525a4a80 ("writeback: bdi_writeback iteration must not skip dying ones")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Hou Tao <houtao1@huawei.com>
Cc: yangerkun <yangerkun@huawei.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel/sys.c: fix and improve control flow in __sys_setres[ug]id()

commit 659c0ce1cb9efc7f58d380ca4bb2a51ae9e30553 upstream.

Linux Security Modules (LSMs) that implement the "capable" hook will
usually emit an access denial message to the audit log whenever they
"block" the current task from using the given capability based on their
security policy.

The occurrence of a denial is used as an indication that the given task
has attempted an operation that requires the given access permission, so
the callers of functions that perform LSM permission checks must take care
to avoid calling them too early (before it is decided if the permission is
actually needed to perform the requested operation).

The __sys_setres[ug]id() functions violate this convention by first
calling ns_capable_setid() and only then checking if the operation
requires the capability or not.  It means that any caller that has the
capability granted by DAC (task's capability set) but not by MAC (LSMs)
will generate a "denied" audit record, even if is doing an operation for
which the capability is not required.

Fix this by reordering the checks such that ns_capable_setid() is checked
last and -EPERM is returned immediately if it returns false.

While there, also do two small optimizations:
* move the capability check before prepare_creds() and
* bail out early in case of a no-op.

Link: https://lkml.kernel.org/r/20230217162154.837549-1-omosnace@redhat.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memstick: fix memory leak if card device is never registered

commit 4b6d621c9d859ff89e68cebf6178652592676013 upstream.

When calling dev_set_name() memory is allocated for the name for the
struct device.  Once that structure device is registered, or attempted
to be registerd, with the driver core, the driver core will handle
cleaning up that memory when the device is removed from the system.

Unfortunatly for the memstick code, there is an error path that causes
the struct device to never be registered, and so the memory allocated in
dev_set_name will be leaked.  Fix that leak by manually freeing it right
before the memory for the device is freed.

Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: linux-mmc@vger.kernel.org
Fixes: 0252c3b4f018 ("memstick: struct device - replace bus_id with dev_name(), dev_set_name()")
Cc: stable <stable@kernel.org>
Co-developed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Link: https://lore.kernel.org/r/20230401200327.16800-1-gregkh@linuxfoundation.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/mm/page_owner_sort.c: fix TGID output when cull=tg is used

commit 9235756885e865070c4be2facda75262dbd85967 upstream.

When using cull option with 'tg' flag, the fprintf is using pid instead
of tgid. It should use tgid instead.

Link: https://lkml.kernel.org/r/20230411034929.2071501-1-steve_chou@pesi.com.tw
Fixes: 9c8a0a8e599f4a ("tools/vm/page_owner_sort.c: support for user-defined culling rules")
Signed-off-by: Steve Chou <steve_chou@pesi.com.tw>
Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nilfs2: initialize unused bytes in segment summary blocks

commit ef832747a82dfbc22a3702219cc716f449b24e4a upstream.

Syzbot still reports uninit-value in nilfs_add_checksums_on_logs() for
KMSAN enabled kernels after applying commit 7397031622e0 ("nilfs2:
initialize "struct nilfs_binfo_dat"->bi_pad field").

This is because the unused bytes at the end of each block in segment
summaries are not initialized.  So this fixes the issue by padding the
unused bytes with null bytes.

Link: https://lkml.kernel.org/r/20230417173513.12598-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+048585f3f4227bb2b49b@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=048585f3f4227bb2b49b
Cc: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: fix a potential memory leak, OOB access, or other unpredictable bug

commit 1f5f12ece722aacea1769fb644f27790ede339dc upstream.

In mas_alloc_nodes(), "node->node_count = 0" means to initialize the
node_count field of the new node, but the node may not be a new node.  It
may be a node that existed before and node_count has a value, setting it
to 0 will cause a memory leak.  At this time, mas->alloc->total will be
greater than the actual number of nodes in the linked list, which may
cause many other errors.  For example, out-of-bounds access in
mas_pop_node(), and mas_pop_node() may return addresses that should not be
used.  Fix it by initializing node_count only for new nodes.

Also, by the way, an if-else statement was removed to simplify the code.

Link: https://lkml.kernel.org/r/20230411041005.26205-1-zhangpeng.00@bytedance.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: fix mas_empty_area() search

commit 06e8fd999334bcd76b4d72d7b9206d4aea89764e upstream.

The internal function of mas_awalk() was incorrectly skipping the last
entry in a node, which could potentially be NULL.  This is only a problem
for the left-most node in the tree - otherwise that NULL would not exist.

Fix mas_awalk() by using the metadata to obtain the end of the node for
the loop and the logical pivot as apposed to the raw pivot value.

Link: https://lkml.kernel.org/r/20230414145728.4067069-2-Liam.Howlett@oracle.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>