phy: phy-mtk-dp: Fix an error code in probe()

[ Upstream commit 5782017cc4d0c8f3425d55b893675bb8a20c33e9 ]

Negative -EINVAL was intended instead of positive EINVAL.

Fixes: 6a23afad443a ("phy: phy-mtk-dp: Add driver for DP phy")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/3c699e00-2883-40d9-92c3-0da1dc38fdd4@moroto.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Prevent vtotal from being set to 0

[ Upstream commit 2a9482e55968ed7368afaa9c2133404069117320 ]

[Why]
In dcn314 DML the destination pipe vtotal was being set
to the crtc adjustment vtotal_min value even in cases
where that value is 0.

[How]
Only set vtotal to the crtc adjustment vtotal_min value
in cases where the value is non-zero.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Fix possible underflow for displays with large vblank

[ Upstream commit 1a4bcdbea4319efeb26cc4b05be859a7867e02dc ]

[Why]
Underflow observed when using a display with a large vblank region
and low refresh rate

[How]
Simplify calculation of vblank_nom

Increase value for VBlankNomDefaultUS to 800us

Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 2a9482e55968 ("drm/amd/display: Prevent vtotal from being set to 0")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: update extended blank for dcn314 onwards

[ Upstream commit 469a62938a45ef382c9cb7b9fec6c6c1fcd781c0 ]

[Why]
Flickering and underflow was observed when testing extended
blank on dcn314.

[What]
Vstartup is contrainted by vblank_nom, so adjusting it to include
non-adjusted vtotal in its calculation during freesync video
means that Vstartup is not changed when vtotal changes.
This fixed the flickering + underflow.

dc_extended_blank_supported function was removed
because extended blank is only relevant to when
zstate is supported. The increased vtotal during
freesync can be passed to dml regardless of whether
extended blank is supported or not, so this function is
not needed.

Updates were made recently in dml to the calculation of
min_dst_y_next_start. Dml input for dcn314 will now
always use the newer calculation for min_dst_y_next_start.
Dml input for older dcn versions remains untouched.

The variable optimized_min_dst_y_next_start
is replaced everywhere with min_dst_y_next_start,
and the updated dml allows min_dst_y_next_start to
increase to an optimized value during freesync video,
then return to default when freesync is disengaged.

Also removed registry key for controlling
extended blank feature.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 2a9482e55968 ("drm/amd/display: Prevent vtotal from being set to 0")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Add FAMS validation before trying to use it

[ Upstream commit e3416e872f84086667df21daf166506fab97358d ]

To ensure that FAMS can be used, DC must check if there is VRR support.
This commit adds the required configuration to ensure FAMS can be executed in the target system.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 2a9482e55968 ("drm/amd/display: Prevent vtotal from being set to 0")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: fix dc/core/dc.c kernel-doc

[ Upstream commit db4107e92a817502ad19fdd30250f87dcb6f6331 ]

Fix all kernel-doc warnings in dc/core/dc.c:

dc.c:385: warning: missing initial short description on line:
 *  dc_stream_adjust_vmin_vmax:
dc.c:392: warning: contents before sections
dc.c:399: warning: No description found for return value of 'dc_stream_adjust_vmin_vmax'
dc.c:434: warning: Excess function parameter 'adjust' description in 'dc_stream_get_last_used_drr_vtotal'
dc.c:434: warning: No description found for return value of 'dc_stream_get_last_used_drr_vtotal'
dc.c:574: warning: No description found for return value of 'dc_stream_configure_crc'
dc.c:1746: warning: No description found for return value of 'dc_commit_state_no_check'
dc.c:4991: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * dc_extended_blank_supported 0 Decide whether extended blank is supported
dc.c:4991: warning: missing initial short description on line:
 * dc_extended_blank_supported 0 Decide whether extended blank is supported
dc.c:4723: warning: Function parameter or member 'dc' not described in 'dc_enable_dmub_outbox'
dc.c:4926: warning: Function parameter or member 'dc' not described in 'dc_process_dmub_dpia_hpd_int_enable'
dc.c:4926: warning: Function parameter or member 'hpd_int_enable' not described in 'dc_process_dmub_dpia_hpd_int_enable'
12 warnings

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 2a9482e55968 ("drm/amd/display: Prevent vtotal from being set to 0")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Rework comments on dc file

[ Upstream commit e366f36958f60c431a7430c8c421c9db0ec6738d ]

The file dc.c has multiple comments that do not follow the kernel-doc or
are made in a distracting way. This commit alleviates part of this issue
by reorganizing some comments inside the dc file.

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 2a9482e55968 ("drm/amd/display: Prevent vtotal from being set to 0")
Signed-off-by: Sasha Levin <sashal@kernel.org>

maple_tree: fix 32 bit mas_next testing

[ Upstream commit 7a93c71a6714ca1a9c03d70432dac104b0cfb815 ]

The test setup of mas_next is dependent on node entry size to create a 2
level tree, but the tests did not account for this in the expected value
when shifting beyond the scope of the tree.

Fix this by setting up the test to succeed depending on the node entries
which is dependent on the 32/64 bit setup.

Link: https://lkml.kernel.org/r/20230712173916.168805-1-Liam.Howlett@oracle.com
Fixes: 120b116208a0 ("maple_tree: reorganize testing to restore module testing")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
  Closes: https://lore.kernel.org/linux-mm/CAMuHMdV4T53fOw7VPoBgPR7fP6RYqf=CBhD_y_vOg53zZX_DnA@mail.gmail.com/
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

maple_tree: add __init and __exit to test module

[ Upstream commit eaf9790d3bc6e157a2134c01c7d707a5a712fab1 ]

The test functions are not needed after the module is removed, so mark
them as such.  Add __exit to the module removal function.  Some other
variables have been marked as const static as well.

Link: https://lkml.kernel.org/r/20230518145544.1722059-20-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vernon Yang <vernon2gm@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 7a93c71a6714 ("maple_tree: fix 32 bit mas_next testing")
Signed-off-by: Sasha Levin <sashal@kernel.org>

test_maple_tree: test modifications while iterating

[ Upstream commit 5159d64b335401fa83f18c27e2267f1eafc41bd3 ]

Add a testcase to ensure the iterator detects bad states on modifications
and does what the user expects

Link: https://lkml.kernel.org/r/20230120162650.984577-5-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 7a93c71a6714 ("maple_tree: fix 32 bit mas_next testing")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing/probes: Fix to record 0-length data_loc in fetch_store_string*() if fails

[ Upstream commit 797311bce5c2ac90b8d65e357603cfd410d36ebb ]

Fix to record 0-length data to data_loc in fetch_store_string*() if it fails
to get the string data.
Currently those expect that the data_loc is updated by store_trace_args() if
it returns the error code. However, that does not work correctly if the
argument is an array of strings. In that case, store_trace_args() only clears
the first entry of the array (which may have no error) and leaves other
entries. So it should be cleared by fetch_store_string*() itself.
Also, 'dyndata' and 'maxlen' in store_trace_args() should be updated
only if it is used (ret > 0 and argument is a dynamic data.)

Link: https://lore.kernel.org/all/168908496683.123124.4761206188794205601.stgit@devnote2/
Fixes: 40b53b771806 ("tracing: probeevent: Add array type support")
Cc: stable@vger.kernel.org
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "tracing: Add "(fault)" name injection to kernel probes"

[ Upstream commit 4ed8f337dee32df71435689c19d22e4ee846e15a ]

This reverts commit 2e9906f84fc7c99388bb7123ade167250d50f1c0.

It was turned out that commit 2e9906f84fc7 ("tracing: Add "(fault)"
name injection to kernel probes") did not work correctly and probe
events still show just '(fault)' (instead of '"(fault)"'). Also,
current '(fault)' is more explicit that it faulted.

This also moves FAULT_STRING macro to trace.h so that synthetic
event can keep using it, and uses it in trace_probe.c too.

Link: https://lore.kernel.org/all/168908495772.123124.1250788051922100079.stgit@devnote2/
Link: https://lore.kernel.org/all/20230706230642.3793a593@rorschach.local.home/
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: 797311bce5c2 ("tracing/probes: Fix to record 0-length data_loc in fetch_store_string*() if fails")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Allow synthetic events to pass around stacktraces

[ Upstream commit 00cf3d672a9dd409418647e9f98784c339c3ff63 ]

Allow a stacktrace from one event to be displayed by the end event of a
synthetic event. This is very useful when looking for the longest latency
of a sleep or something blocked on I/O.

 # cd /sys/kernel/tracing/
 # echo 's:block_lat pid_t pid; u64 delta; unsigned long[] stack;' > dynamic_events
 # echo 'hist:keys=next_pid:ts=common_timestamp.usecs,st=stacktrace  if prev_state == 1||prev_state == 2' > events/sched/sched_switch/trigger
 # echo 'hist:keys=prev_pid:delta=common_timestamp.usecs-$ts,s=$st:onmax($delta).trace(block_lat,prev_pid,$delta,$s)' >> events/sched/sched_switch/trigger

The above creates a "block_lat" synthetic event that take the stacktrace of
when a task schedules out in either the interruptible or uninterruptible
states, and on a new per process max $delta (the time it was scheduled
out), will print the process id and the stacktrace.

  # echo 1 > events/synthetic/block_lat/enable
  # cat trace
 #           TASK-PID     CPU#  |||||  TIMESTAMP  FUNCTION
 #              | |         |   |||||     |         |
    kworker/u16:0-767     [006] d..4.   560.645045: block_lat: pid=767 delta=66 stack=STACK:
 => __schedule
 => schedule
 => pipe_read
 => vfs_read
 => ksys_read
 => do_syscall_64
 => 0x966000aa

           <idle>-0       [003] d..4.   561.132117: block_lat: pid=0 delta=413787 stack=STACK:
 => __schedule
 => schedule
 => schedule_hrtimeout_range_clock
 => do_sys_poll
 => __x64_sys_poll
 => do_syscall_64
 => 0x966000aa

            <...>-153     [006] d..4.   562.068407: block_lat: pid=153 delta=54 stack=STACK:
 => __schedule
 => schedule
 => io_schedule
 => rq_qos_wait
 => wbt_wait
 => __rq_qos_throttle
 => blk_mq_submit_bio
 => submit_bio_noacct_nocheck
 => ext4_bio_write_page
 => mpage_submit_page
 => mpage_process_page_bufs
 => mpage_prepare_extent_to_map
 => ext4_do_writepages
 => ext4_writepages
 => do_writepages
 => __writeback_single_inode

Link: https://lkml.kernel.org/r/20230117152236.010941267@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Ching-lin Yu <chinglinyu@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: 797311bce5c2 ("tracing/probes: Fix to record 0-length data_loc in fetch_store_string*() if fails")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing/probes: Fix to avoid double count of the string length on the array

[ Upstream commit 66bcf65d6cf0ca6540e2341e88ee7ef02dbdda08 ]

If an array is specified with the ustring or symstr, the length of the
strings are accumlated on both of 'ret' and 'total', which means the
length is double counted.
Just set the length to the 'ret' value for avoiding double counting.

Link: https://lore.kernel.org/all/168908492917.123124.15076463491122036025.stgit@devnote2/
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/8819b154-2ba1-43c3-98a2-cbde20892023@moroto.mountain/
Fixes: 88903c464321 ("tracing/probe: Add ustring type for user-space string")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing/probes: Add symstr type for dynamic events

[ Upstream commit b26a124cbfa80f42bfc4e63e1d5643ca98159d66 ]

Add 'symstr' type for storing the kernel symbol as a string data
instead of the symbol address. This allows us to filter the
events by wildcard symbol name.

e.g.
  # echo 'e:wqfunc workqueue.workqueue_execute_start symname=$function:symstr' >> dynamic_events
  # cat events/eprobes/wqfunc/format
  name: wqfunc
  ID: 2110
  format:
   field:unsigned short common_type; offset:0; size:2; signed:0;
   field:unsigned char common_flags; offset:2; size:1; signed:0;
   field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
   field:int common_pid; offset:4; size:4; signed:1;

   field:__data_loc char[] symname; offset:8; size:4; signed:1;

  print fmt: " symname=\"%s\"", __get_str(symname)

Note that there is already 'symbol' type which just change the
print format (so it still stores the symbol address in the tracing
ring buffer.) On the other hand, 'symstr' type stores the actual
"symbol+offset/size" data as a string.

Link: https://lore.kernel.org/all/166679930847.1528100.4124308529180235965.stgit@devnote3/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Stable-dep-of: 66bcf65d6cf0 ("tracing/probes: Fix to avoid double count of the string length on the array")
Signed-off-by: Sasha Levin <sashal@kernel.org>

mptcp: do not rely on implicit state check in mptcp_listen()

[ Upstream commit 0226436acf2495cde4b93e7400e5a87305c26054 ]

Since the blamed commit, closing the first subflow resets the first
subflow socket state to SS_UNCONNECTED.

The current mptcp listen implementation relies only on such
state to prevent touching not-fully-disconnected sockets.

Incoming mptcp fastclose (or paired endpoint removal) unconditionally
closes the first subflow.

All the above allows an incoming fastclose followed by a listen() call
to successfully race with a blocking recvmsg(), potentially causing the
latter to hit a divide by zero bug in cleanup_rbuf/__tcp_select_window().

Address the issue explicitly checking the msk socket state in
mptcp_listen(). An alternative solution would be moving the first
subflow socket state update into mptcp_disconnect(), but in the long
term the first subflow socket should be removed: better avoid relaying
on it for internal consistency check.

Fixes: b29fcfb54cd7 ("mptcp: full disconnect implementation")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/414
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mptcp: introduce 'sk' to replace 'sock->sk' in mptcp_listen()

[ Upstream commit cfdcfeed6449d702825d249cb85346ecf56236fc ]

'sock->sk' is used frequently in mptcp_listen(). Therefore, we can
introduce the 'sk' and replace 'sock->sk' with it.

Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 0226436acf24 ("mptcp: do not rely on implicit state check in mptcp_listen()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: errata: Mitigate Ampere1 erratum AC03_CPU_38 at stage-2

[ Upstream commit 6df696cd9bc1ceed0e92e36908f88bbd16d18255 ]

AmpereOne has an erratum in its implementation of FEAT_HAFDBS that
required disabling the feature on the design. This was done by reporting
the feature as not implemented in the ID register, although the
corresponding control bits were not actually RES0. This does not align
well with the requirements of the architecture, which mandates these
bits be RES0 if HAFDBS isn't implemented.

The kernel's use of stage-1 is unaffected, as the HA and HD bits are
only set if HAFDBS is detected in the ID register. KVM, on the other
hand, relies on the RES0 behavior at stage-2 to use the same value for
VTCR_EL2 on any cpu in the system. Mitigate the non-RES0 behavior by
leaving VTCR_EL2.HA clear on affected systems.

Cc: stable@vger.kernel.org
Cc: D Scott Phillips <scott@os.amperecomputing.com>
Cc: Darren Hart <darren@os.amperecomputing.com>
Acked-by: D Scott Phillips <scott@os.amperecomputing.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230609220104.1836988-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: arm64: Condition HW AF updates on config option

[ Upstream commit 1dfc3e905089a0bcada268fb5691a605655e0319 ]

As it currently stands, KVM makes use of FEAT_HAFDBS unconditionally.
Use of the feature in the rest of the kernel is guarded by an associated
Kconfig option.

Align KVM with the rest of the kernel and only enable VTCR_HA when
ARM64_HW_AFDBM is enabled. This can be helpful for testing changes to
the stage-2 access fault path on Armv8.1+ implementations.

Link: https://lore.kernel.org/r/20221202185156.696189-7-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Stable-dep-of: 6df696cd9bc1 ("arm64: errata: Mitigate Ampere1 erratum AC03_CPU_38 at stage-2")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/ttm: never consider pinned BOs for eviction&swap

[ Upstream commit a2848d08742c8e8494675892c02c0d22acbe3cf8 ]

There is a small window where we have already incremented the pin count
but not yet moved the bo from the lru to the pinned list.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Pelloux-Prayer, Pierre-Eric <Pierre-eric.Pelloux-prayer@amd.com>
Tested-by: Pelloux-Prayer, Pierre-Eric <Pierre-eric.Pelloux-prayer@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20230707120826.3701-1-christian.koenig@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: fix hang on tty device with no_room set

[ Upstream commit 4903fde8047a28299d1fc79c1a0dcc255e928f12 ]

It is possible to hang pty devices in this case, the reader was
blocking at epoll on master side, the writer was sleeping at
wait_woken inside n_tty_write on slave side, and the write buffer
on tty_port was full, we found that the reader and writer would
never be woken again and blocked forever.

The problem was caused by a race between reader and kworker:
n_tty_read(reader):  n_tty_receive_buf_common(kworker):
copy_from_read_buf()|
                    |room = N_TTY_BUF_SIZE - (ldata->read_head - tail)
                    |room <= 0
n_tty_kick_worker() |
                    |ldata->no_room = true

After writing to slave device, writer wakes up kworker to flush
data on tty_port to reader, and the kworker finds that reader
has no room to store data so room <= 0 is met. At this moment,
reader consumes all the data on reader buffer and calls
n_tty_kick_worker to check ldata->no_room which is false and
reader quits reading. Then kworker sets ldata->no_room=true
and quits too.

If write buffer is not full, writer will wake kworker to flush data
again after following writes, but if write buffer is full and writer
goes to sleep, kworker will never be woken again and tty device is
blocked.

This problem can be solved with a check for read buffer size inside
n_tty_receive_buf_common, if read buffer is empty and ldata->no_room
is true, a call to n_tty_kick_worker is necessary to keep flushing
data to reader.

Cc: <stable@vger.kernel.org>
Fixes: 42458f41d08f ("n_tty: Ensure reader restarts worker for next reader")
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Hui Li <caelli@tencent.com>
Message-ID: <1680749090-14106-1-git-send-email-caelli@tencent.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

n_tty: Rename tail to old_tail in n_tty_read()

[ Upstream commit 947d66b68f3c4e7cf8f3f3500807b9d2a0de28ce ]

The local tail variable in n_tty_read() is used for one purpose, it
keeps the old tail. Thus, rename it appropriately to improve code
readability.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/22b37499-ff9a-7fc1-f6e0-58411328d122@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 4903fde8047a ("tty: fix hang on tty device with no_room set")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/ttm: Don't leak a resource on eviction error

[ Upstream commit e8188c461ee015ba0b9ab2fc82dbd5ebca5a5532 ]

On eviction errors other than -EMULTIHOP we were leaking a resource.
Fix.

v2:
- Avoid yet another goto (Andi Shyti)

Fixes: 403797925768 ("drm/ttm: Fix multihop assert on eviction.")
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> #v1
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230626091450.14757-4-thomas.hellstrom@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/ttm: Don't print error message if eviction was interrupted

[ Upstream commit 8ab3b0663e279ab550bc2c0b5d602960e8b94e02 ]

Avoid printing an error message if eviction was interrupted by,
for example, the user pressing CTRL-C. That may happen if eviction
is waiting for something, like for example a free batch-buffer.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230307144621.10748-6-thomas.hellstrom@linux.intel.com
Stable-dep-of: e8188c461ee0 ("drm/ttm: Don't leak a resource on eviction error")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Set minimum requirement for using PSR-SU on Phoenix

[ Upstream commit cd2e31a9ab93d13c412a36c6e26811e0f830985b ]

The same parade TCON issue can potentially happen on Phoenix, and the same
PSR resilience changes have been ported into the DMUB firmware.

Don't allow running PSR-SU unless on the newer firmware.

Cc: stable@vger.kernel.org
Cc: Sean Wang <sean.ns.wang@amd.com>
Cc: Marc Rossi <Marc.Rossi@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Cc: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Set minimum requirement for using PSR-SU on Rembrandt

[ Upstream commit c35b6ea8f2ecfa9d775530b70d4e727869099a9c ]

A number of parade TCONs are causing system hangs when utilized with
older DMUB firmware and PSR-SU. Some changes have been introduced into
DMUB firmware to add resilience against these failures.

Don't allow running PSR-SU unless on the newer firmware.

Cc: stable@vger.kernel.org
Cc: Sean Wang <sean.ns.wang@amd.com>
Cc: Marc Rossi <Marc.Rossi@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Cc: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2443
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: cd2e31a9ab93 ("drm/amd/display: Set minimum requirement for using PSR-SU on Phoenix")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Update correct DCN314 register header

[ Upstream commit 268182606f26434c5d3ebd0e86efcb0418dec487 ]

[Why]
The register header for DCN314 is not correct.

[How]
Update correct DCN314 register header.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Cruise Hung <cruise.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: cd2e31a9ab93 ("drm/amd/display: Set minimum requirement for using PSR-SU on Phoenix")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: fix dcn315 single stream crb allocation

[ Upstream commit 49f26218c344741cb3eaa740b1e44e960551a87f ]

Change to improve avoiding asymetric crb calculations for single stream
scenarios.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: add pixel rate based CRB allocation support

[ Upstream commit 9ba90d760e9354c124fa9bbea08017d96699a82c ]

This feature is meant to unblock PSTATE for certain high end display
configs on dcn315. This is achieved by allocating CRB to detile buffer
based on display requirements to meet pstate latency hiding needs.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 49f26218c344 ("drm/amd/display: fix dcn315 single stream crb allocation")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: fix unbounded requesting for high pixel rate modes on dcn315

[ Upstream commit 655435df0936ce2fda0d5ced7e50101179a3acfd ]

Unbounded requesting is getting configured for odm mode calculations which
is incorrect. This change checks whether mode requires odm ahead of time.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 49f26218c344 ("drm/amd/display: fix dcn315 single stream crb allocation")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: use low clocks for no plane configs

[ Upstream commit 2641c7b7808191cba25ba28b82bb73ca294924cc ]

Stream only configurations do not require DCFCLK, SOCCLK, DPPCLK
or FCLK. They also always allow pstate change.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 49f26218c344 ("drm/amd/display: fix dcn315 single stream crb allocation")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: add ODM case when looking for first split pipe

[ Upstream commit 59de751e3845d699e02dc4da47322b92d83a41e2 ]

[Why]
When going from ODM 2:1 single display case to max displays, second
odm pipe needs to be repurposed for one of the new single displays.
However, acquire_first_split_pipe() only handles MPC case and not
ODM case

[How]
Add ODM conditions in acquire_first_split_pipe()
Add commit_minimal_transition_state() in commit_streams() to handle
odm 2:1 exit first, and then process new streams
Handle ODM condition in commit_minimal_transition_state()

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Use min transition for all SubVP plane add/remove

[ Upstream commit e4c1b01bc35b04e15782608165aa85b9e1724f7b ]

[Description]
- Whenever disabling a phantom pipe, we must run through the
  minimal transition sequence
- In the case where SetVisibility = false for the main pipe,
  we also need to run through the min transtion when disabling
  the phantom pipes

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 59de751e3845 ("drm/amd/display: add ODM case when looking for first split pipe")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Include surface of unaffected streams

[ Upstream commit f6ae69f49fcf697b6ffa93d58eb3746897f61cf8 ]

The commit stream function does not include surfaces of unaffected
streams, which may lead to some blank screens during mode change in some
edge cases. This commit adds surfaces of unaffected streams followed by
kernel-doc for documenting some of the fields that participate in this
change.

v2: squash in kerneldoc warning fix (Alex)

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 59de751e3845 ("drm/amd/display: add ODM case when looking for first split pipe")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Copy DC context in the commit streams

[ Upstream commit 0e986cea0347902b2c72b09c8fe9c0f30d7decb4 ]

DC adds an instance of DML (which contains VBA) to each context, and
multiple threads might write back to the global VBA resulting in data
overwriting. To keep the consistency with other parts of the DC code,
this commit changes dc_commit_streams to copy the current DC state, and
as a result, it also changes the function signature to expect streams
instead of a context.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 59de751e3845 ("drm/amd/display: add ODM case when looking for first split pipe")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Enable new commit sequence only for DCN32x

[ Upstream commit 7b36f4d18e3e4941d12fe027ad6ad6123c257027 ]

Change commit sequence will impact all ASICs. It is prudent to run this
update in small steps to keep issues under control and avoid any
potential regression. With this idea in mind, this commit is preparation
work for the complete transition to the new commit sequence. To maintain
this change manageable across multiple ASICs, this commit adds a new
function named dc_commit_streams which is a copy of the dc_commit_state
with some minor changes. Finally, inside the dc_commit_state, we check
if we are using DCN32x or above and enable the new sequence only for
those devices.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 59de751e3845 ("drm/amd/display: add ODM case when looking for first split pipe")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Rework context change check

[ Upstream commit 10fdb0a11c555e0d6f7698d2874581d06e99ee71 ]

Context change is all about streams; for this reason, this commit
renames context_changed to streams_changed. Additionally, to make this
function more flexible, this commit changes the function signature to
receive the stream array and the stream count as a parameter.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 59de751e3845 ("drm/amd/display: add ODM case when looking for first split pipe")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Check if link state is valid

[ Upstream commit 03ce7b387e8b0f4a1dc97a878545bdf7c7f23251 ]

The link state is set to false if there is no link and local sink. Even
though the stream state may not change, it is desirable to commit the
new stream when HPD goes low to high.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 59de751e3845 ("drm/amd/display: add ODM case when looking for first split pipe")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: add FB_DAMAGE_CLIPS support

[ Upstream commit 30ebe41582d1ea5a7de990319f9e593dad4886f7 ]

Currently, userspace doesn't have a way to communicate selective updates
to displays. So, enable support for FB_DAMAGE_CLIPS for DCN ASICs newer
than DCN301, convert DRM damage clips to dc dirty rectangles and fill
them into dirty_rects in fill_dc_dirty_rects().

Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 72f1de49ffb9 ("drm/dp_mst: Clear MSG_RDY flag before sending new message")
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: rockchip: Don't advertise MSI-X in PCIe capabilities

[ Upstream commit a52587e0bee14cbeeadf48a24013828cb04b8df8 ]

The RK3399 PCIe endpoint controller cannot generate MSI-X IRQs.
This is documented in the RK3399 technical reference manual (TRM)
section 17.5.9 "Interrupt Support".

MSI-X capability should therefore not be advertised. Remove the
MSI-X capability by editing the capability linked-list. The
previous entry is the MSI capability, therefore get the next
entry from the MSI-X capability entry and set it as next entry
for the MSI capability. This in effect removes MSI-X from the list.

Linked list before : MSI cap -> MSI-X cap -> PCIe Device cap -> ...
Linked list now : MSI cap -> PCIe Device cap -> ...

Link: https://lore.kernel.org/r/20230418074700.1083505-11-rick.wertenbroek@gmail.com
Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: rockchip: Fix window mapping and address translation for endpoint

[ Upstream commit dc73ed0f1b8bddd7f2bf70d123e68ffc99ad71ce ]

The RK3399 PCI endpoint core has 33 windows for PCIe space, now in the
driver up to 32 fixed size (1M) windows are used and pages are allocated
and mapped accordingly. The driver first used a single window and allocated
space inside which caused translation issues (between CPU space and PCI
space) because a window can only have a single translation at a given
time, which if multiple pages are allocated inside will cause conflicts.
Now each window is a single region of 1M which will always guarantee that
the translation is not in conflict.

Set the translation register addresses for physical function. As documented
in the technical reference manual (TRM) section 17.5.5 "PCIe Address
Translation" and section 17.6.8 "Address Translation Registers Description"

Link: https://lore.kernel.org/r/20230418074700.1083505-9-rick.wertenbroek@gmail.com
Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: rockchip: Remove writes to unused registers

[ Upstream commit 92a9c57c325dd51682d428ba960d961fec3c8a08 ]

Remove write accesses to registers that are marked "unused" (and
therefore read-only) in the technical reference manual (TRM)
(see RK3399 TRM 17.6.8.1)

Link: https://lore.kernel.org/r/20230418074700.1083505-2-rick.wertenbroek@gmail.com
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Stable-dep-of: dc73ed0f1b8b ("PCI: rockchip: Fix window mapping and address translation for endpoint")
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/ASPM: Avoid link retraining race

[ Upstream commit e7e39756363ad5bd83ddeae1063193d0f13870fd ]

PCIe r6.0.1, sec 7.5.3.7, recommends setting the link control parameters,
then waiting for the Link Training bit to be clear before setting the
Retrain Link bit.

This avoids a race where the LTSSM may not use the updated parameters if it
is already in the midst of link training because of other normal link
activity.

Wait for the Link Training bit to be clear before toggling the Retrain Link
bit to ensure that the LTSSM uses the updated link control parameters.

[bhelgaas: commit log, return 0 (success)/-ETIMEDOUT instead of bool for
both pcie_wait_for_retrain() and the existing pcie_retrain_link()]
Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support")
Link: https://lore.kernel.org/r/20230502083923.34562-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/ASPM: Factor out pcie_wait_for_retrain()

[ Upstream commit 9c7f136433d26592cb4d9cd00b4e15c33d9797c6 ]

Factor pcie_wait_for_retrain() out from pcie_retrain_link().  No functional
change intended.

[bhelgaas: split out from
https: //lore.kernel.org/r/20230502083923.34562-1-ilpo.jarvinen@linux.intel.com]
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Stable-dep-of: e7e39756363a ("PCI/ASPM: Avoid link retraining race")
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/ASPM: Return 0 or -ETIMEDOUT from pcie_retrain_link()

[ Upstream commit f5297a01ee805d7fa569d288ed65fc0f9ac9b03d ]

"pcie_retrain_link" is not a question with a true/false answer, so "bool"
isn't quite the right return type.  Return 0 for success or -ETIMEDOUT if
the retrain failed.  No functional change intended.

[bhelgaas: based on Ilpo's patch below]
Link: https://lore.kernel.org/r/20230502083923.34562-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Stable-dep-of: e7e39756363a ("PCI/ASPM: Avoid link retraining race")
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: Loongson: Fix build error when make modules_install

[ Upstream commit 531b3d1195d096f14e030c4b01ec3a53b80276bf ]

After commit 0e96ea5c3eb5904e5dc2f ("MIPS: Loongson64: Clean up use of
cc-ifversion") we get a build error when make modules_install:

cc1: error: '-mloongson-mmi' must be used with '-mhard-float'

The reason is when make modules_install, 'call cc-option' doesn't work
in $(KBUILD_CFLAGS) of 'CHECKFLAGS'. Then there is no -mno-loongson-mmi
applied and -march=loongson3a enable MMI instructions.

To be detail, the error message comes from the CHECKFLAGS invocation of
$(CC) but it has no impact on the final result of make modules_install,
it is purely a cosmetic issue. The error occurs because cc-option is
defined in scripts/Makefile.compiler, which is not included in Makefile
when running 'make modules_install', as install targets are not supposed
to require the compiler; see commit 805b2e1d427aab4b ("kbuild: include
Makefile.compiler only when compiler is needed"). As a result, the call
to check for '-mno-loongson-mmi' just never happens.

Fix this by partially reverting to the old logic, use 'call cc-option'
to conditionally apply -march=loongson3a and -march=mips64r2.

By the way, Loongson-2E/2F is also broken in commit 13ceb48bc19c563e05f4
("MIPS: Loongson2ef: Remove unnecessary {as,cc}-option calls") so fix it
together.

Fixes: 13ceb48bc19c563e05f4 ("MIPS: Loongson2ef: Remove unnecessary {as,cc}-option calls")
Fixes: 0e96ea5c3eb5904e5dc2 ("MIPS: Loongson64: Clean up use of cc-ifversion")
Cc: stable@vger.kernel.org
Cc: Feiyang Chen <chenfeiyang@loongson.cn>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: Loongson: Move arch cflags to MIPS top level Makefile

[ Upstream commit 194a835210521282ad31e8f7047556318611f596 ]

Arch cflags should be independent to Platform.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Stable-dep-of: 531b3d1195d0 ("MIPS: Loongson: Fix build error when make modules_install")
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: nomadik: Remove a useless call in the remove function

[ Upstream commit 05f933d5f7318b03ff2028c1704dc867ac16f2c7 ]

Since commit 235602146ec9 ("i2c-nomadik: turn the platform driver to an amba
driver"), there is no more request_mem_region() call in this driver.

So remove the release_mem_region() call from the remove function which is
likely a left over.

Fixes: 235602146ec9 ("i2c-nomadik: turn the platform driver to an amba driver")
Cc: <stable@vger.kernel.org> # v3.6+
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: nomadik: Use devm_clk_get_enabled()

[ Upstream commit 9c7174db4cdd111e10d19eed5c36fd978a14c8a2 ]

Replace the pair of functions, devm_clk_get() and
clk_prepare_enable(), with a single function
devm_clk_get_enabled().

Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 05f933d5f731 ("i2c: nomadik: Remove a useless call in the remove function")
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: nomadik: Remove unnecessary goto label

[ Upstream commit 1c5d33fff0d375e4ab7c4261dc62a286babbb4c6 ]

The err_no_mem goto label doesn't do anything. Remove it.

Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 05f933d5f731 ("i2c: nomadik: Remove a useless call in the remove function")
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: Improve size determinations

[ Upstream commit 06e989578232da33a7fe96b04191b862af8b2cec ]

Replace the specification of a data structure by a pointer dereference
as the parameter for the operator "sizeof" to make the corresponding
size determination a bit safer according to the Linux coding style
convention.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 05f933d5f731 ("i2c: nomadik: Remove a useless call in the remove function")
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: Delete error messages for failed memory allocations

[ Upstream commit 6b3b21a8542fd2fb6ffc61bc13b9419f0c58ebad ]

These issues were detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 05f933d5f731 ("i2c: nomadik: Remove a useless call in the remove function")
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: fix race between quota disable and relocation

[ Upstream commit 8a4a0b2a3eaf75ca8854f856ef29690c12b2f531 ]

If we disable quotas while we have a relocation of a metadata block group
that has extents belonging to the quota root, we can cause the relocation
to fail with -ENOENT. This is because relocation builds backref nodes for
extents of the quota root and later needs to walk the backrefs and access
the quota root - however if in between a task disables quotas, it results
in deleting the quota root from the root tree (with btrfs_del_root(),
called from btrfs_quota_disable().

This can be sporadically triggered by test case btrfs/255 from fstests:

  $ ./check btrfs/255
  FSTYP         -- btrfs
  PLATFORM      -- Linux/x86_64 debian0 6.4.0-rc6-btrfs-next-134+ #1 SMP PREEMPT_DYNAMIC Thu Jun 15 11:59:28 WEST 2023
  MKFS_OPTIONS  -- /dev/sdc
  MOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1

  btrfs/255 6s ... _check_dmesg: something found in dmesg (see /home/fdmanana/git/hub/xfstests/results//btrfs/255.dmesg)
  - output mismatch (see /home/fdmanana/git/hub/xfstests/results//btrfs/255.out.bad)
#      --- tests/btrfs/255.out 2023-03-02 21:47:53.876609426 +0000
#      +++ /home/fdmanana/git/hub/xfstests/results//btrfs/255.out.bad 2023-06-16 10:20:39.267563212 +0100
#      @@ -1,2 +1,4 @@
#       QA output created by 255
#      +ERROR: error during balancing '/home/fdmanana/btrfs-tests/scratch_1': No such file or directory
#      +There may be more info in syslog - try dmesg | tail
#       Silence is golden
#      ...
      (Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/btrfs/255.out /home/fdmanana/git/hub/xfstests/results//btrfs/255.out.bad'  to see the entire diff)
  Ran: btrfs/255
  Failures: btrfs/255
  Failed 1 of 1 tests

To fix this make the quota disable operation take the cleaner mutex, as
relocation of a block group also takes this mutex. This is also what we
do when deleting a subvolume/snapshot, we take the cleaner mutex in the
cleaner kthread (at cleaner_kthread()) and then we call btrfs_del_root()
at btrfs_drop_snapshot() while under the protection of the cleaner mutex.

Fixes: bed92eae26cc ("Btrfs: qgroup implementation and prototypes")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: mvebu: fix irq domain leak

[ Upstream commit 644ee70267a934be27370f9aa618b29af7290544 ]

Uwe Kleine-König pointed out we still have one resource leak in the mvebu
driver triggered on driver detach. Let's address it with a custom devm
action.

Fixes: 812d47889a8e ("gpio/mvebu: Use irq_domain_add_linear")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: mvebu: Make use of devm_pwmchip_add

[ Upstream commit 1945063eb59e64d2919cb14d54d081476d9e53bb ]

This allows to get rid of a call to pwmchip_remove() in the error path. There
is no .remove function for this driver, so this change fixes a resource leak
when a gpio-mvebu device is unbound.

Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: Add a stub for devm_pwmchip_add()

commit 88da4e8113110d5f4ebdd2f8cd0899e300cd1954 upstream.

The devm_pwmchip_add() can be called by a module that optionally
instantiates PWM chip. In the case of CONFIG_PWM=n, the compilation
can't be performed. Hence, add a necessary stub.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: tps68470: Make tps68470_gpio_output() always set the initial value

[ Upstream commit 5a7adc6c1069ce31ef4f606ae9c05592c80a6ab5 ]

Make tps68470_gpio_output() call tps68470_gpio_set() for output-only pins
too, so that the initial value passed to gpiod_direction_output() is
honored for these pins too.

Fixes: 275b13a65547 ("gpio: Add support for TPS68470 GPIOs")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: don't audit the capability check in io_uring_create()

[ Upstream commit 6adc2272aaaf84f34b652cf77f770c6fcc4b8336 ]

The check being unconditional may lead to unwanted denials reported by
LSMs when a process has the capability granted by DAC, but denied by an
LSM. In the case of SELinux such denials are a problem, since they can't
be effectively filtered out via the policy and when not silenced, they
produce noise that may hide a true problem or an attack.

Since not having the capability merely means that the created io_uring
context will be accounted against the current user's RLIMIT_MEMLOCK
limit, we can disable auditing of denials for this check by using
ns_capable_noaudit() instead of capable().

Fixes: 2b188cc1bb85 ("Add io_uring IO interface")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2193317
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Link: https://lore.kernel.org/r/20230718115607.65652-1-omosnace@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: s390: pv: fix index value of replaced ASCE

[ Upstream commit c2fceb59bbda16468bda82b002383bff59de89ab ]

The index field of the struct page corresponding to a guest ASCE should
be 0. When replacing the ASCE in s390_replace_asce(), the index of the
new ASCE should also be set to 0.

Having the wrong index might lead to the wrong addresses being passed
around when notifying pte invalidations, and eventually to validity
intercepts (VM crash) if the prefix gets unmapped and the notifier gets
called with the wrong address.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Fixes: faa2f72cb356 ("KVM: s390: pv: leak the topmost page table when destroy fails")
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20230705111937.33472-3-imbrenda@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries/vas: Hold mmap_mutex after mmap lock during window close

[ Upstream commit b59c9dc4d9d47b3c4572d826603fde507055b656 ]

Commit 8ef7b9e1765a ("powerpc/pseries/vas: Close windows with DLPAR
core removal") unmaps the window paste address and issues HCALL to
close window in the hypervisor for migration or DLPAR core removal
events. So holds mmap_mutex and then mmap lock before unmap the
paste address. But if the user space issue mmap paste address at
the same time with the migration event, coproc_mmap() is called
after holding the mmap lock which can trigger deadlock when trying
to acquire mmap_mutex in coproc_mmap().

t1: mmap() call to mmap              t2: Migration event
    window paste address

do_mmap2()                           migration_store()
 ksys_mmap_pgoff()                    pseries_migrate_partition()
  vm_mmap_pgoff()                      vas_migration_handler()
    Acquire mmap lock                   reconfig_close_windows()
    do_mmap()                             lock mmap_mutex
     mmap_region()                        Acquire mmap lock
      call_mmap()                         //Wait for mmap lock
       coproc_mmap()                        unmap vma
         lock mmap_mutex                    update window status
         //wait for mmap_mutex            Release mmap lock
          mmap vma                        unlock mmap_mutex
          update window status
         unlock mmap_mutex
    ...
    Release mmap lock

Fix this deadlock issue by holding mmap lock first before mmap_mutex
in reconfig_close_windows().

Fixes: 8ef7b9e1765a ("powerpc/pseries/vas: Close windows with DLPAR core removal")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230716100506.7833-1-haren@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-mq: Fix stall due to recursive flush plug

[ Upstream commit 70904263512a74a3b8941dd9e6e515ca6fc57821 ]

We have seen rare IO stalls as follows:

* blk_mq_plug_issue_direct() is entered with an mq_list containing two
requests.
* For the first request, it sets last == false and enters the driver's
queue_rq callback.
* The driver queue_rq callback indirectly calls schedule() which calls
blk_flush_plug(). This may happen if the driver has the
BLK_MQ_F_BLOCKING flag set and is allowed to sleep in ->queue_rq.
* blk_flush_plug() handles the remaining request in the mq_list. mq_list
is now empty.
* The original call to queue_rq resumes (with last == false).
* The loop in blk_mq_plug_issue_direct() terminates because there are no
remaining requests in mq_list.

The IO is now stalled because the last request submitted to the driver
had last == false and there was no subsequent call to commit_rqs().

Fix this by returning early in blk_mq_flush_plug_list() if rq_count is 0
which it will be in the recursive case, rather than checking if the
mq_list is empty. At the same time, adjust one of the callers to skip
the mq_list empty check as it is not necessary.

Fixes: dc5fc361d891 ("block: attempt direct issue of plug list")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230714101106.3635611-1-ross.lagerwall@citrix.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint

[ Upstream commit e34c8dd238d0c9368b746480f313055f5bab5040 ]

Following process,

jbd2_journal_commit_transaction
// there are several dirty buffer heads in transaction->t_checkpoint_list
          P1                   wb_workfn
jbd2_log_do_checkpoint
 if (buffer_locked(bh)) // false
                            __block_write_full_page
                             trylock_buffer(bh)
                             test_clear_buffer_dirty(bh)
 if (!buffer_dirty(bh))
  __jbd2_journal_remove_checkpoint(jh)
   if (buffer_write_io_error(bh)) // false
                             >> bh IO error occurs <<
 jbd2_cleanup_journal_tail
  __jbd2_update_log_tail
   jbd2_write_superblock
   // The bh won't be replayed in next mount.
, which could corrupt the ext4 image, fetch a reproducer in [Link].

Since writeback process clears buffer dirty after locking buffer head,
we can fix it by try locking buffer and check dirtiness while buffer is
locked, the buffer head can be removed if it is neither dirty nor locked.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217490
Fixes: 470decc613ab ("[PATCH] jbd2: initial copy of files from jbd")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230606135928.434610-5-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd: Align SMU11 SMU_MSG_OverridePcieParameters implementation with SMU13

commit e701156ccc6c7a5f104a968dda74cd6434178712 upstream.

SMU13 overrides dynamic PCIe lane width and dynamic speed by when on
certain hosts. commit 38e4ced80479 ("drm/amd/pm: conditionally disable
pcie lane switching for some sienna_cichlid SKUs") worked around this
issue by setting up certain SKUs to set up certain limits, but the same
fundamental problem with those hosts affects all SMU11 implmentations
as well, so align the SMU11 and SMU13 driver handling.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd: Move helper for dynamic speed switch check out of smu13

commit 188623076d0f1a500583d392b6187056bf7cc71a upstream.

This helper is used for checking if the connected host supports
the feature, it can be moved into generic code to be used by other
smu implementations as well.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: fix null pointer dereference in ovl_permission()

commit 1a73f5b8f079fd42a544c1600beface50c63af7c upstream.

Following process:
          P1                     P2
 path_lookupat
  link_path_walk
   inode_permission
    ovl_permission
      ovl_i_path_real(inode, &realpath)
        path->dentry = ovl_i_dentry_upper(inode)
                          drop_cache
   __dentry_kill(ovl_dentry)
            iput(ovl_inode)
             ovl_destroy_inode(ovl_inode)
              dput(oi->__upperdentry)
               dentry_kill(upperdentry)
                dentry_unlink_inode
 upperdentry->d_inode = NULL
      realinode = d_inode(realpath.dentry) // return NULL
      inode_permission(realinode)
       inode->i_sb  // NULL pointer dereference
, will trigger an null pointer dereference at realinode:
  [  335.664979] BUG: kernel NULL pointer dereference,
                 address: 0000000000000002
  [  335.668032] CPU: 0 PID: 2592 Comm: ls Not tainted 6.3.0
  [  335.669956] RIP: 0010:inode_permission+0x33/0x2c0
  [  335.678939] Call Trace:
  [  335.679165]  <TASK>
  [  335.679371]  ovl_permission+0xde/0x320
  [  335.679723]  inode_permission+0x15e/0x2c0
  [  335.680090]  link_path_walk+0x115/0x550
  [  335.680771]  path_lookupat.isra.0+0xb2/0x200
  [  335.681170]  filename_lookup+0xda/0x240
  [  335.681922]  vfs_statx+0xa6/0x1f0
  [  335.682233]  vfs_fstatat+0x7b/0xb0

Fetch a reproducer in [Link].

Use the helper ovl_i_path_realinode() to get realinode and then do
non-nullptr checking.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217405
Fixes: 4b7791b2e958 ("ovl: handle idmappings in ovl_permission()")
Cc: <stable@vger.kernel.org> # v5.19
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Suggested-by: Christian Brauner <brauner@kernel.org>
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Keep PHY active for dp config

commit 2b02d746c1818baf741f4eeeff9b97ab4b81e1cf upstream.

[Why]
Current hotplug sequence causes temporary hang at the re-entry of the
optimized power state.

[How]
Keep a PHY active when detecting DP signal + DPMS active

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86/amd/pmf: reduce verbosity of apmf_get_system_params

commit 839e90e75e695b3d9ee17f5a2811e7ee5aea8d4a upstream.

apmf_get_system_params() failure is not a critical event, reduce its
verbosity from dev_err to dev_dbg.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230714144435.1239776-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86/amd/pmf: Notify OS power slider update

commit 33c9ab5b493a0e922b06c12fed4fdcb862212cda upstream.

APMF fn8 can notify EC about the OS slider position change. Add this
capability to the PMF driver so that it can call the APMF fn8 based on
the changes in the Platform profile events.

Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230714144435.1239776-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: fix underflow in chain reference counter

commit b389139f12f287b8ed2e2628b72df89a081f0b59 upstream.

Set element addition error path decrements reference counter on chains
twice: once on element release and again via nft_data_release().

Then, d6b478666ffa ("netfilter: nf_tables: fix underflow in object
reference counter") incorrectly fixed this by removing the stateful
object reference count decrement.

Restore the stateful object decrement as in b91d90368837 ("netfilter:
nf_tables: fix leaking object reference count") and let
nft_data_release() decrement the chain reference counter, so this is
done only once.

Fixes: d6b478666ffa ("netfilter: nf_tables: fix underflow in object reference counter")
Fixes: 628bd3e49cba ("netfilter: nf_tables: drop map element references from preparation phase")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: fix underflow in object reference counter

commit d6b478666ffa6d2c25386d78bf1c4640d4da305e upstream.

Since ("netfilter: nf_tables: drop map element references from
preparation phase"), integration with commit protocol is better,
therefore drop the workaround that b91d90368837 ("netfilter: nf_tables:
fix leaking object reference count") provides.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 6.1.42

Link: https://lore.kernel.org/r/20230725104507.756981058@linuxfoundation.org
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "drm/amd/display: edp do not add non-edid timings"

commit d6149086b45e150c170beaa4546495fd1880724c upstream.

This change causes regression when eDP and external display in mirror
mode. When external display supports low resolution than eDP, use eDP
timing to driver external display may cause corruption on external
display.

This reverts commit e749dd10e5f292061ad63d2b030194bf7d7d452c.

Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2655
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Add polling method to handle MST reply packet

commit 4f6d9e38c4d244ad106eb9ebd8c0e1215e866f35 upstream.

[Why]
Specific TBT4 dock doesn't send out short HPD to notify source
that IRQ event DOWN_REP_MSG_RDY is set. Which violates the spec
and cause source can't send out streams to mst sinks.

[How]
To cover this misbehavior, add an additional polling method to detect
DOWN_REP_MSG_RDY is set. HPD driven handling method is still kept.
Just hook up our handler to drm mgr->cbs->poll_hpd_irq().

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: fix linux dp link lost handled only one time

commit e322843e5e33e72ff218d661f3d15ff9c9f2f1b5 upstream.

[Why]
linux amdgpu defer handle link lost irq. dm add handle
request to irq work queue for the first irq of link lost.
if link training fails for link lost handle, link will not
be enabled anymore.

[How]
allow adding handle request of link lost to work queue
before running dp link training for link lost.

Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ Modified due to not having
  c5a31f178e352 ("drm/amd/display: move dp irq handler functions from dc_link_dp to link_dp_irq_handler")
  until kernel 6.3-rc1.]
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Clean up errors & warnings in amdgpu_dm.c

commit 87279fdf5ee0ad1360765ef70389d1c4d0f81bb6 upstream.

Fix the following errors & warnings reported by checkpatch:

ERROR: space required before the open brace '{'
ERROR: space required before the open parenthesis '('
ERROR: that open brace { should be on the previous line
ERROR: space prohibited before that ',' (ctx:WxW)
ERROR: else should follow close brace '}'
ERROR: open brace '{' following function definitions go on the next line
ERROR: code indent should use tabs where possible

WARNING: braces {} are not necessary for single statement blocks
WARNING: void function return statements are not generally useful
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line

Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ Modified for missing
  c5a31f178e35 ("drm/amd/display: move dp irq handler functions from dc_link_dp to link_dp_irq_handler")
  which landed in 6.3]
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: force connector state when bpc changes during compliance

commit 028c4ccfb8127255d60f8d9edde96cacf2958082 upstream.

[Why]
During DP DSC compliance tests, bpc requested would
change between sub-tests, which requires stream
to be recommited.

[How]
Force connector to disconnect and reconnect whenever
there is a bpc change in automated test.

Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ Adjustments for headers that were moved around in later commits. ]
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/dp_mst: Clear MSG_RDY flag before sending new message

commit 72f1de49ffb90b29748284f27f1d6b829ab1de95 upstream.

[Why]
The sequence for collecting down_reply from source perspective should
be:

Request_n->repeat (get partial reply of Request_n->clear message ready
flag to ack DPRX that the message is received) till all partial
replies for Request_n are received->new Request_n+1.

Now there is chance that drm_dp_mst_hpd_irq() will fire new down
request in the tx queue when the down reply is incomplete. Source is
restricted to generate interveleaved message transactions so we should
avoid it.

Also, while assembling partial reply packets, reading out DPCD DOWN_REP
Sideband MSG buffer + clearing DOWN_REP_MSG_RDY flag should be
wrapped up as a complete operation for reading out a reply packet.
Kicking off a new request before clearing DOWN_REP_MSG_RDY flag might
be risky. e.g. If the reply of the new request has overwritten the
DPRX DOWN_REP Sideband MSG buffer before source writing one to clear
DOWN_REP_MSG_RDY flag, source then unintentionally flushes the reply
for the new request. Should handle the up request in the same way.

[How]
Separete drm_dp_mst_hpd_irq() into 2 steps. After acking the MST IRQ
event, driver calls drm_dp_mst_hpd_irq_send_new_request() and might
trigger drm_dp_mst_kick_tx() only when there is no on going message
transaction.

Changes since v1:
* Reworked on review comments received
-> Adjust the fix to let driver explicitly kick off new down request
when mst irq event is handled and acked
-> Adjust the commit message

Changes since v2:
* Adjust the commit message
* Adjust the naming of the divided 2 functions and add a new input
  parameter "ack".
* Adjust code flow as per review comments.

Changes since v3:
* Update the function description of drm_dp_mst_hpd_irq_handle_event

Changes since v4:
* Change ack of drm_dp_mst_hpd_irq_handle_event() to be an array align
  the size of esi[]

Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: fix some coding style issues

commit ae67558be712237109100fd14f12378adcf24356 upstream.

Fix the following checkpatch checks in amdgpu_dm.c

CHECK: Prefer kernel type 'u8' over 'uint8_t'
CHECK: Prefer kernel type 'u32' over 'uint32_t'
CHECK: Prefer kernel type 'u64' over 'uint64_t'
CHECK: Prefer kernel type 's32' over 'int32_t'

Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ PSR-SU support was introduced in kernel 6.2 with commits like
  30ebe41582d1 ("drm/amd/display: add FB_DAMAGE_CLIPS support")
  but PSR-SU isn't enabled in 6.1.y, so this block needs to be skipped
  when backporting. ]
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: use max_dsc_bpp in amdgpu_dm

commit 6e5abe94c6eb9b281398e39819217e8fdd1c336f upstream.

Since, the quirk is handled in the DRM core now, we can use that value
instead of the internal value.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/bpf: Fix sk_assign on s390x

[ Upstream commit 7ce878ca81bca7811e669db4c394b86780e0dbe4 ]

sk_assign is failing on an s390x machine running Debian "bookworm" for
2 reasons: legacy server_map definition and uninitialized addrlen in
recvfrom() call.

Fix by adding a new-style server_map definition and dropping addrlen
(recvfrom() allows NULL values for src_addr and addrlen).

Since the test should support tc built without libbpf, build the prog
twice: with the old-style definition and with the new-style definition,
then select the right one at runtime. This could be done at compile
time too, but this would not be cross-compilation friendly.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230129190501.1624747-2-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/bpf: Workaround verification failure for fexit_bpf2bpf/func_replace_return_code

[ Upstream commit 63d78b7e8ca2d0eb8c687a355fa19d01b6fcc723 ]

With latest llvm17, selftest fexit_bpf2bpf/func_replace_return_code
has the following verification failure:

  0: R1=ctx(off=0,imm=0) R10=fp0
  ; int connect_v4_prog(struct bpf_sock_addr *ctx)
  0: (bf) r7 = r1                       ; R1=ctx(off=0,imm=0) R7_w=ctx(off=0,imm=0)
  1: (b4) w6 = 0                        ; R6_w=0
  ; memset(&tuple.ipv4.saddr, 0, sizeof(tuple.ipv4.saddr));
  ...
  ; return do_bind(ctx) ? 1 : 0;
  179: (bf) r1 = r7                     ; R1=ctx(off=0,imm=0) R7=ctx(off=0,imm=0)
  180: (85) call pc+147
  Func#3 is global and valid. Skipping.
  181: R0_w=scalar()
  181: (bc) w6 = w0                     ; R0_w=scalar() R6_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
  182: (05) goto pc-129
  ; }
  54: (bc) w0 = w6                      ; R0_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R6_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
  55: (95) exit
  At program exit the register R0 has value (0x0; 0xffffffff) should have been in (0x0; 0x1)
  processed 281 insns (limit 1000000) max_states_per_insn 1 total_states 26 peak_states 26 mark_read 13
  -- END PROG LOAD LOG --
  libbpf: prog 'connect_v4_prog': failed to load: -22

The corresponding source code:

  __attribute__ ((noinline))
  int do_bind(struct bpf_sock_addr *ctx)
  {
        struct sockaddr_in sa = {};

        sa.sin_family = AF_INET;
        sa.sin_port = bpf_htons(0);
        sa.sin_addr.s_addr = bpf_htonl(SRC_REWRITE_IP4);

        if (bpf_bind(ctx, (struct sockaddr *)&sa, sizeof(sa)) != 0)
                return 0;

        return 1;
  }
  ...
  SEC("cgroup/connect4")
  int connect_v4_prog(struct bpf_sock_addr *ctx)
  {
  ...
        return do_bind(ctx) ? 1 : 0;
  }

Insn 180 is a call to 'do_bind'. The call's return value is also the return value
for the program. Since do_bind() returns 0/1, so it is legitimate for compiler to
optimize 'return do_bind(ctx) ? 1 : 0' to 'return do_bind(ctx)'. However, such
optimization breaks verifier as the return value of 'do_bind()' is marked as any
scalar which violates the requirement of prog return value 0/1.

There are two ways to fix this problem, (1) changing 'return 1' in do_bind() to
e.g. 'return 10' so the compiler has to do 'do_bind(ctx) ? 1 :0', or (2)
suggested by Andrii, marking do_bind() with __weak attribute so the compiler
cannot make any assumption on do_bind() return value.

This patch adopted adding __weak approach which is simpler and more resistant
to potential compiler optimizations.

Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230310012410.2920570-1-yhs@fb.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/bpf: make test_align selftest more robust

[ Upstream commit 4f999b767769b76378c3616c624afd6f4bb0d99f ]

test_align selftest relies on BPF verifier log emitting register states
for specific instructions in expected format. Unfortunately, BPF
verifier precision backtracking log interferes with such expectations.
And instruction on which precision propagation happens sometimes don't
output full expected register states. This does indeed look like
something to be improved in BPF verifier, but is beyond the scope of
this patch set.

So to make test_align a bit more robust, inject few dummy R4 = R5
instructions which capture desired state of R5 and won't have precision
tracking logs on them. This fixes tests until we can improve BPF
verifier output in the presence of precision tracking.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221104163649.121784-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: aggressively forget precise markings during state checkpointing

[ Upstream commit 7a830b53c17bbadcf99f778f28aaaa4e6c41df5f ]

Exploit the property of about-to-be-checkpointed state to be able to
forget all precise markings up to that point even more aggressively. We
now clear all potentially inherited precise markings right before
checkpointing and branching off into child state. If any of children
states require precise knowledge of any SCALAR register, those will be
propagated backwards later on before this state is finalized, preserving
correctness.

There is a single selftests BPF program change, but tremendous one: 25x
reduction in number of verified instructions and states in
trace_virtqueue_add_sgs.

Cilium results are more modest, but happen across wider range of programs.

SELFTESTS RESULTS
=================

$ ./veristat -C -e file,prog,insns,states ~/imprecise-early-results.csv ~/imprecise-aggressive-results.csv | grep -v '+0'
File                 Program                  Total insns (A)  Total insns (B)  Total insns (DIFF)  Total states (A)  Total states (B)  Total states (DIFF)
-------------------  -----------------------  ---------------  ---------------  ------------------  ----------------  ----------------  -------------------
loop6.bpf.linked1.o  trace_virtqueue_add_sgs           398057            15114   -382943 (-96.20%)              8717               336      -8381 (-96.15%)
-------------------  -----------------------  ---------------  ---------------  ------------------  ----------------  ----------------  -------------------

CILIUM RESULTS
==============

$ ./veristat -C -e file,prog,insns,states ~/imprecise-early-results-cilium.csv ~/imprecise-aggressive-results-cilium.csv | grep -v '+0'
File           Program                           Total insns (A)  Total insns (B)  Total insns (DIFF)  Total states (A)  Total states (B)  Total states (DIFF)
-------------  --------------------------------  ---------------  ---------------  ------------------  ----------------  ----------------  -------------------
bpf_host.o     tail_handle_nat_fwd_ipv4                    23426            23221       -205 (-0.88%)              1537              1515         -22 (-1.43%)
bpf_host.o     tail_handle_nat_fwd_ipv6                    13009            12904       -105 (-0.81%)               719               708         -11 (-1.53%)
bpf_host.o     tail_nodeport_nat_ingress_ipv6               5261             5196        -65 (-1.24%)               247               243          -4 (-1.62%)
bpf_host.o     tail_nodeport_nat_ipv6_egress                3446             3406        -40 (-1.16%)               203               198          -5 (-2.46%)
bpf_lxc.o      tail_handle_nat_fwd_ipv4                    23426            23221       -205 (-0.88%)              1537              1515         -22 (-1.43%)
bpf_lxc.o      tail_handle_nat_fwd_ipv6                    13009            12904       -105 (-0.81%)               719               708         -11 (-1.53%)
bpf_lxc.o      tail_ipv4_ct_egress                          5074             4897       -177 (-3.49%)               255               248          -7 (-2.75%)
bpf_lxc.o      tail_ipv4_ct_ingress                         5100             4923       -177 (-3.47%)               255               248          -7 (-2.75%)
bpf_lxc.o      tail_ipv4_ct_ingress_policy_only             5100             4923       -177 (-3.47%)               255               248          -7 (-2.75%)
bpf_lxc.o      tail_ipv6_ct_egress                          4558             4536        -22 (-0.48%)               188               187          -1 (-0.53%)
bpf_lxc.o      tail_ipv6_ct_ingress                         4578             4556        -22 (-0.48%)               188               187          -1 (-0.53%)
bpf_lxc.o      tail_ipv6_ct_ingress_policy_only             4578             4556        -22 (-0.48%)               188               187          -1 (-0.53%)
bpf_lxc.o      tail_nodeport_nat_ingress_ipv6               5261             5196        -65 (-1.24%)               247               243          -4 (-1.62%)
bpf_overlay.o  tail_nodeport_nat_ingress_ipv6               5261             5196        -65 (-1.24%)               247               243          -4 (-1.62%)
bpf_overlay.o  tail_nodeport_nat_ipv6_egress                3482             3442        -40 (-1.15%)               204               201          -3 (-1.47%)
bpf_xdp.o      tail_nodeport_nat_egress_ipv4               17200            15619      -1581 (-9.19%)              1111              1010        -101 (-9.09%)
-------------  --------------------------------  ---------------  ---------------  ------------------  ----------------  ----------------  -------------------

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221104163649.121784-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: stop setting precise in current state

[ Upstream commit f63181b6ae79fd3b034cde641db774268c2c3acf ]

Setting reg->precise to true in current state is not necessary from
correctness standpoint, but it does pessimise the whole precision (or
rather "imprecision", because that's what we want to keep as much as
possible) tracking. Why is somewhat subtle and my best attempt to
explain this is recorded in an extensive comment for __mark_chain_precise()
function. Some more careful thinking and code reading is probably required
still to grok this completely, unfortunately. Whiteboarding and a bunch
of extra handwaiving in person would be even more helpful, but is deemed
impractical in Git commit.

Next patch pushes this imprecision property even further, building on top of
the insights described in this patch.

End results are pretty nice, we get reduction in number of total instructions
and states verified due to a better states reuse, as some of the states are now
more generic and permissive due to less unnecessary precise=true requirements.

SELFTESTS RESULTS
=================

$ ./veristat -C -e file,prog,insns,states ~/subprog-precise-results.csv ~/imprecise-early-results.csv | grep -v '+0'
File                                     Program                 Total insns (A)  Total insns (B)  Total insns (DIFF)  Total states (A)  Total states (B)  Total states (DIFF)
---------------------------------------  ----------------------  ---------------  ---------------  ------------------  ----------------  ----------------  -------------------
bpf_iter_ksym.bpf.linked1.o              dump_ksym                           347              285       -62 (-17.87%)                20                19          -1 (-5.00%)
pyperf600_bpf_loop.bpf.linked1.o         on_event                           3678             3736        +58 (+1.58%)               276               285          +9 (+3.26%)
setget_sockopt.bpf.linked1.o             skops_sockopt                      4038             3947        -91 (-2.25%)               347               343          -4 (-1.15%)
test_l4lb.bpf.linked1.o                  balancer_ingress                   4559             2611     -1948 (-42.73%)               118               105        -13 (-11.02%)
test_l4lb_noinline.bpf.linked1.o         balancer_ingress                   6279             6268        -11 (-0.18%)               237               236          -1 (-0.42%)
test_misc_tcp_hdr_options.bpf.linked1.o  misc_estab                         1307             1303         -4 (-0.31%)               100                99          -1 (-1.00%)
test_sk_lookup.bpf.linked1.o             ctx_narrow_access                   456              447         -9 (-1.97%)                39                38          -1 (-2.56%)
test_sysctl_loop1.bpf.linked1.o          sysctl_tcp_mem                     1389             1384         -5 (-0.36%)                26                25          -1 (-3.85%)
test_tc_dtime.bpf.linked1.o              egress_fwdns_prio101                518              485        -33 (-6.37%)                51                46          -5 (-9.80%)
test_tc_dtime.bpf.linked1.o              egress_host                         519              468        -51 (-9.83%)                50                44         -6 (-12.00%)
test_tc_dtime.bpf.linked1.o              ingress_fwdns_prio101               842             1000      +158 (+18.76%)                73                88        +15 (+20.55%)
xdp_synproxy_kern.bpf.linked1.o          syncookie_tc                     405757           373173     -32584 (-8.03%)             25735             22882      -2853 (-11.09%)
xdp_synproxy_kern.bpf.linked1.o          syncookie_xdp                    479055           371590   -107465 (-22.43%)             29145             22207      -6938 (-23.81%)
---------------------------------------  ----------------------  ---------------  ---------------  ------------------  ----------------  ----------------  -------------------

Slight regression in test_tc_dtime.bpf.linked1.o/ingress_fwdns_prio101
is left for a follow up, there might be some more precision-related bugs
in existing BPF verifier logic.

CILIUM RESULTS
==============

$ ./veristat -C -e file,prog,insns,states ~/subprog-precise-results-cilium.csv ~/imprecise-early-results-cilium.csv | grep -v '+0'
File           Program                         Total insns (A)  Total insns (B)  Total insns (DIFF)  Total states (A)  Total states (B)  Total states (DIFF)
-------------  ------------------------------  ---------------  ---------------  ------------------  ----------------  ----------------  -------------------
bpf_host.o     cil_from_host                               762              556      -206 (-27.03%)                43                37         -6 (-13.95%)
bpf_host.o     tail_handle_nat_fwd_ipv4                  23541            23426       -115 (-0.49%)              1538              1537          -1 (-0.07%)
bpf_host.o     tail_nodeport_nat_egress_ipv4             33592            33566        -26 (-0.08%)              2163              2161          -2 (-0.09%)
bpf_lxc.o      tail_handle_nat_fwd_ipv4                  23541            23426       -115 (-0.49%)              1538              1537          -1 (-0.07%)
bpf_overlay.o  tail_nodeport_nat_egress_ipv4             33581            33543        -38 (-0.11%)              2160              2157          -3 (-0.14%)
bpf_xdp.o      tail_handle_nat_fwd_ipv4                  21659            20920       -739 (-3.41%)              1440              1376         -64 (-4.44%)
bpf_xdp.o      tail_handle_nat_fwd_ipv6                  17084            17039        -45 (-0.26%)               907               905          -2 (-0.22%)
bpf_xdp.o      tail_lb_ipv4                              73442            73430        -12 (-0.02%)              4370              4369          -1 (-0.02%)
bpf_xdp.o      tail_lb_ipv6                             152114           151895       -219 (-0.14%)              6493              6479         -14 (-0.22%)
bpf_xdp.o      tail_nodeport_nat_egress_ipv4             17377            17200       -177 (-1.02%)              1125              1111         -14 (-1.24%)
bpf_xdp.o      tail_nodeport_nat_ingress_ipv6             6405             6397         -8 (-0.12%)               309               308          -1 (-0.32%)
bpf_xdp.o      tail_rev_nodeport_lb4                      7126             6934       -192 (-2.69%)               414               402         -12 (-2.90%)
bpf_xdp.o      tail_rev_nodeport_lb6                     18059            17905       -154 (-0.85%)              1105              1096          -9 (-0.81%)
-------------  ------------------------------  ---------------  ---------------  ------------------  ----------------  ----------------  -------------------

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221104163649.121784-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: allow precision tracking for programs with subprogs

[ Upstream commit be2ef8161572ec1973124ebc50f56dafc2925e07 ]

Stop forcing precise=true for SCALAR registers when BPF program has any
subprograms. Current restriction means that any BPF program, as soon as
it uses subprograms, will end up not getting any of the precision
tracking benefits in reduction of number of verified states.

This patch keeps the fallback mark_all_scalars_precise() behavior if
precise marking has to cross function frames. E.g., if subprogram
requires R1 (first input arg) to be marked precise, ideally we'd need to
backtrack to the parent function and keep marking R1 and its
dependencies as precise. But right now we give up and force all the
SCALARs in any of the current and parent states to be forced to
precise=true. We can lift that restriction in the future.

But this patch fixes two issues identified when trying to enable
precision tracking for subprogs.

First, prevent "escaping" from top-most state in a global subprog. While
with entry-level BPF program we never end up requesting precision for
R1-R5 registers, because R2-R5 are not initialized (and so not readable
in correct BPF program), and R1 is PTR_TO_CTX, not SCALAR, and so is
implicitly precise. With global subprogs, though, it's different, as
global subprog a) can have up to 5 SCALAR input arguments, which might
get marked as precise=true and b) it is validated in isolation from its
main entry BPF program. b) means that we can end up exhausting parent
state chain and still not mark all registers in reg_mask as precise,
which would lead to verifier bug warning.

To handle that, we need to consider two cases. First, if the very first
state is not immediately "checkpointed" (i.e., stored in state lookup
hashtable), it will get correct first_insn_idx and last_insn_idx
instruction set during state checkpointing. As such, this case is
already handled and __mark_chain_precision() already handles that by
just doing nothing when we reach to the very first parent state.
st->parent will be NULL and we'll just stop. Perhaps some extra check
for reg_mask and stack_mask is due here, but this patch doesn't address
that issue.

More problematic second case is when global function's initial state is
immediately checkpointed before we manage to process the very first
instruction. This is happening because when there is a call to global
subprog from the main program the very first subprog's instruction is
marked as pruning point, so before we manage to process first
instruction we have to check and checkpoint state. This patch adds
a special handling for such "empty" state, which is identified by having
st->last_insn_idx set to -1. In such case, we check that we are indeed
validating global subprog, and with some sanity checking we mark input
args as precise if requested.

Note that we also initialize state->first_insn_idx with correct start
insn_idx offset. For main program zero is correct value, but for any
subprog it's quite confusing to not have first_insn_idx set. This
doesn't have any functional impact, but helps with debugging and state
printing. We also explicitly initialize state->last_insns_idx instead of
relying on is_state_visited() to do this with env->prev_insns_idx, which
will be -1 on the very first instruction. This concludes necessary
changes to handle specifically global subprog's precision tracking.

Second identified problem was missed handling of BPF helper functions
that call into subprogs (e.g., bpf_loop and few others). From precision
tracking and backtracking logic's standpoint those are effectively calls
into subprogs and should be called as BPF_PSEUDO_CALL calls.

This patch takes the least intrusive way and just checks against a short
list of current BPF helpers that do call subprogs, encapsulated in
is_callback_calling_function() function. But to prevent accidentally
forgetting to add new BPF helpers to this "list", we also do a sanity
check in __check_func_call, which has to be called for each such special
BPF helper, to validate that BPF helper is indeed recognized as
callback-calling one. This should catch any missed checks in the future.
Adding some special flags to be added in function proto definitions
seemed like an overkill in this case.

With the above changes, it's possible to remove forceful setting of
reg->precise to true in __mark_reg_unknown, which turns on precision
tracking both inside subprogs and entry progs that have subprogs. No
warnings or errors were detected across all the selftests, but also when
validating with veristat against internal Meta BPF objects and Cilium
objects. Further, in some BPF programs there are noticeable reduction in
number of states and instructions validated due to more effective
precision tracking, especially benefiting syncookie test.

$ ./veristat -C -e file,prog,insns,states ~/baseline-results.csv ~/subprog-precise-results.csv  | grep -v '+0'
File                                      Program                     Total insns (A)  Total insns (B)  Total insns (DIFF)  Total states (A)  Total states (B)  Total states (DIFF)
----------------------------------------  --------------------------  ---------------  ---------------  ------------------  ----------------  ----------------  -------------------
pyperf600_bpf_loop.bpf.linked1.o          on_event                               3966             3678       -288 (-7.26%)               306               276         -30 (-9.80%)
pyperf_global.bpf.linked1.o               on_event                               7563             7530        -33 (-0.44%)               520               517          -3 (-0.58%)
pyperf_subprogs.bpf.linked1.o             on_event                              36358            36934       +576 (+1.58%)              2499              2531         +32 (+1.28%)
setget_sockopt.bpf.linked1.o              skops_sockopt                          3965             4038        +73 (+1.84%)               343               347          +4 (+1.17%)
test_cls_redirect_subprogs.bpf.linked1.o  cls_redirect                          64965            64901        -64 (-0.10%)              4619              4612          -7 (-0.15%)
test_misc_tcp_hdr_options.bpf.linked1.o   misc_estab                             1491             1307      -184 (-12.34%)               110               100         -10 (-9.09%)
test_pkt_access.bpf.linked1.o             test_pkt_access                         354              349         -5 (-1.41%)                25                24          -1 (-4.00%)
test_sock_fields.bpf.linked1.o            egress_read_sock_fields                 435              375       -60 (-13.79%)                22                20          -2 (-9.09%)
test_sysctl_loop2.bpf.linked1.o           sysctl_tcp_mem                         1508             1501         -7 (-0.46%)                29                28          -1 (-3.45%)
test_tc_dtime.bpf.linked1.o               egress_fwdns_prio100                    468              435        -33 (-7.05%)                45                41          -4 (-8.89%)
test_tc_dtime.bpf.linked1.o               ingress_fwdns_prio100                   398              408        +10 (+2.51%)                42                39          -3 (-7.14%)
test_tc_dtime.bpf.linked1.o               ingress_fwdns_prio101                  1096              842      -254 (-23.18%)                97                73        -24 (-24.74%)
test_tcp_hdr_options.bpf.linked1.o        estab                                  2758             2408      -350 (-12.69%)               208               181        -27 (-12.98%)
test_urandom_usdt.bpf.linked1.o           urand_read_with_sema                    466              448        -18 (-3.86%)                31                28          -3 (-9.68%)
test_urandom_usdt.bpf.linked1.o           urand_read_without_sema                 466              448        -18 (-3.86%)                31                28          -3 (-9.68%)
test_urandom_usdt.bpf.linked1.o           urandlib_read_with_sema                 466              448        -18 (-3.86%)                31                28          -3 (-9.68%)
test_urandom_usdt.bpf.linked1.o           urandlib_read_without_sema              466              448        -18 (-3.86%)                31                28          -3 (-9.68%)
test_xdp_noinline.bpf.linked1.o           balancer_ingress_v6                    4302             4294         -8 (-0.19%)               257               256          -1 (-0.39%)
xdp_synproxy_kern.bpf.linked1.o           syncookie_tc                         583722           405757   -177965 (-30.49%)             35846             25735     -10111 (-28.21%)
xdp_synproxy_kern.bpf.linked1.o           syncookie_xdp                        609123           479055   -130068 (-21.35%)             35452             29145      -6307 (-17.79%)
----------------------------------------  --------------------------  ---------------  ---------------  ------------------  ----------------  ----------------  -------------------

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221104163649.121784-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts/kallsyms: update the usage in the comment block

commit 79549da691edd4874c19d99c578a134471817c47 upstream.

Commit 010a0aad39fc ("kallsyms: Correctly sequence symbols when
CONFIG_LTO_CLANG=y") added --lto-clang, and updated the usage()
function, but not the comment. Update it in the same way.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts/kallsyms.c Make the comment up-to-date with current implementation

commit adc40221bf676f3e722d135889a7b913b4162dc2 upstream.

The comment in scripts/kallsyms.c describing the usage of
scripts/kallsyms does not reflect the latest implementation.
Fix the comment to be equivalent to what the usage() function prints.

Signed-off-by: Yuma Ueda <cyan@0x00a1e9.dev>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20221118133631.4554-1-cyan@0x00a1e9.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kallsyms: add kallsyms_seqs_of_names to list of special symbols

commit ced0f245ed951e2b8bd68f79c15238d7dd253662 upstream.

My randconfig build setup ran into another kallsyms warning:

Inconsistent kallsyms data
Try make KALLSYMS_EXTRA_PASS=1 as a workaround

After adding some debugging code to kallsyms.c, I saw that the recently
added kallsyms_seqs_of_names symbol can sometimes cause the second stage
table to be slightly longer than the first stage, which makes the
build inconsistent.

Add it to the exception table that contains all other kallsyms-generated
symbols.

Fixes: 60443c88f3a8 ("kallsyms: Improve the performance of kallsyms_lookup_name()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: dw: Remove misleading comment for Mount Evans SoC

commit 5b6d0b91f84cff3f28724076f93f6f9e2ef8d775 upstream.

Remove a misleading comment about the DMA operations of the Intel Mount
Evans SoC's SPI Controller as requested by Serge.

Signed-off-by: Abe Kohandel <abe.kohandel@intel.com>
Link: https://lore.kernel.org/linux-spi/20230606191333.247ucbf7h3tlooxf@mobilestation/
Fixes: 0760d5d0e9f0 ("spi: dw: Add compatible for Intel Mount Evans SoC")
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20230606231844.726272-1-abe.kohandel@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ttm: fix bulk_move corruption when adding a entry

commit 4481913607e58196c48a4fef5e6f45350684ec3c upstream.

When the resource is the first in the bulk_move range, adding it again
(thus moving it to the tail) will corrupt the list since the first
pointer is not moved. This eventually lead to null pointer deref in
ttm_lru_bulk_move_del()

Fixes: fee2ede15542 ("drm/ttm: rework bulk move handling v5")
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20230622141902.28718-3-Yunxiang.Li@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/histograms: Return an error if we fail to add histogram to hist_vars list

commit 4b8b3905165ef98386a3c06f196c85d21292d029 upstream.

Commit 6018b585e8c6 ("tracing/histograms: Add histograms to hist_vars if
they have referenced variables") added a check to fail histogram creation
if save_hist_vars() failed to add histogram to hist_vars list. But the
commit failed to set ret to failed return code before jumping to
unregister histogram, fix it.

Link: https://lore.kernel.org/linux-trace-kernel/20230714203341.51396-1-mkhalfella@purestorage.com
Cc: stable@vger.kernel.org
Fixes: 6018b585e8c6 ("tracing/histograms: Add histograms to hist_vars if they have referenced variables")
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: recheck chechpointing non-dirty buffer

commit c2d6fd9d6f35079f1669f0100f05b46708c74b7f upstream.

There is a long-standing metadata corruption issue that happens from
time to time, but it's very difficult to reproduce and analyse, benefit
from the JBD2_CYCLE_RECORD option, we found out that the problem is the
checkpointing process miss to write out some buffers which are raced by
another do_get_write_access(). Looks below for detail.

jbd2_log_do_checkpoint() //transaction X
 //buffer A is dirty and not belones to any transaction
 __buffer_relink_io() //move it to the IO list
 __flush_batch()
  write_dirty_buffer()
                             do_get_write_access()
                             clear_buffer_dirty
                             __jbd2_journal_file_buffer()
                             //add buffer A to a new transaction Y
   lock_buffer(bh)
   //doesn't write out
 __jbd2_journal_remove_checkpoint()
 //finish checkpoint except buffer A
 //filesystem corrupt if the new transaction Y isn't fully write out.

Due to the t_checkpoint_list walking loop in jbd2_log_do_checkpoint()
have already handles waiting for buffers under IO and re-added new
transaction to complete commit, and it also removing cleaned buffers,
this makes sure the list will eventually get empty. So it's fine to
leave buffers on the t_checkpoint_list while flushing out and completely
stop using the t_checkpoint_io_list.

Cc: stable@vger.kernel.org
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Tested-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230606135928.434610-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: prevent stale pointer dereference in phy_init()

[ Upstream commit 1c613beaf877c0c0d755853dc62687e2013e55c4 ]

mdio_bus_init() and phy_driver_register() both have error paths, and if
those are ever hit, ethtool will have a stale pointer to the
phy_ethtool_phy_ops stub structure, which references memory from a
module that failed to load (phylib).

It is probably hard to force an error in this code path even manually,
but the error teardown path of phy_init() should be the same as
phy_exit(), which is now simply not the case.

Fixes: 55d8f053ce1b ("net: phy: Register ethtool PHY operations")
Link: https://lore.kernel.org/netdev/ZLaiJ4G6TaJYGJyU@shell.armlinux.org.uk/
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230720000231.1939689-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: annotate data-races around fastopenq.max_qlen

[ Upstream commit 70f360dd7042cb843635ece9d28335a4addff9eb ]

This field can be read locklessly.

Fixes: 1536e2857bd3 ("tcp: Add a TCP_FASTOPEN socket option to get a max backlog on its listner")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-12-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: annotate data-races around icsk->icsk_user_timeout

[ Upstream commit 26023e91e12c68669db416b97234328a03d8e499 ]

This field can be read locklessly from do_tcp_getsockopt()

Fixes: dca43c75e7e5 ("tcp: Add TCP_USER_TIMEOUT socket option.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-11-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: annotate data-races around tp->notsent_lowat

[ Upstream commit 1aeb87bc1440c5447a7fa2d6e3c2cca52cbd206b ]

tp->notsent_lowat can be read locklessly from do_tcp_getsockopt()
and tcp_poll().

Fixes: c9bee3b7fdec ("tcp: TCP_NOTSENT_LOWAT socket option")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-10-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: annotate data-races around rskq_defer_accept

[ Upstream commit ae488c74422fb1dcd807c0201804b3b5e8a322a3 ]

do_tcp_getsockopt() reads rskq_defer_accept while another cpu
might change its value.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: annotate data-races around tp->linger2

[ Upstream commit 9df5335ca974e688389c875546e5819778a80d59 ]

do_tcp_getsockopt() reads tp->linger2 while another cpu
might change its value.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: annotate data-races around icsk->icsk_syn_retries

[ Upstream commit 3a037f0f3c4bfe44518f2fbb478aa2f99a9cd8bb ]

do_tcp_getsockopt() and reqsk_timer_handler() read
icsk->icsk_syn_retries while another cpu might change its value.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: annotate data-races around tp->keepalive_probes

[ Upstream commit 6e5e1de616bf5f3df1769abc9292191dfad9110a ]

do_tcp_getsockopt() reads tp->keepalive_probes while another cpu
might change its value.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>