Merge branch 'for-linus' of git://www.jni.nu/cris

* 'for-linus' of git://www.jni.nu/cris:
  [CRISv10] Clean up compressed/misc.c
  [CRISv10] Correct whitespace damage.
  [CRIS] Correct definition of subdirs for install_headers.
  [CRIS] Correct image makefiles to allow using a separate OBJ-directory.
  [CRIS] Build fixes for compressed and rescue images for v10 and v32:
  It looks at least odd to apply spin_unlock to a mutex.
  cris: compile fixes for 2.6.26-rc5

initrd: Fix virtual/physical mix-up in overwrite test

On recent kernels, I get the following error when using an initrd:

| initrd overwritten (0x00b78000 < 0x07668000) - disabling it.

My Amiga 4000 has 12 MiB of RAM at physical address 0x07400000 (virtual
0x00000000).
The initrd is located at the end of RAM: 0x00b78000 - 0x00c00000 (virtual).
The overwrite test compares the (virtual) initrd location to the (physical)
first available memory location, which fails.

This patch converts initrd_start to a page frame number, so it can safely be
compared with min_low_pfn.

Before the introduction of discontiguous memory support on m68k
(12d810c1b8c2b913d48e629e2b5c01d105029839), min_low_pfn was just left
untouched by the m68k-specific code (zero, I guess), and everything worked
fine.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dio: use dio_match_device() in dio_bus_match()

dio_bus_match() can use dio_match_device().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/m68k/mm/sun3mmu.c: Eliminate NULL test and memset after alloc_bootmem

As noted by Akinobu Mita in patch b1fceac2b9e04d278316b2faddf276015fc06e3b,
alloc_bootmem and related functions never return NULL and always return a
zeroed region of memory.  Thus a NULL test or memset after calls to these
functions is unnecessary.

This was fixed using the following semantic patch.
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression E;
statement S;
@@

E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...)
.. when != E
(
- BUG_ON (E == NULL);
|
- if (E == NULL) S
)

@@
expression E,E1;
@@

E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...)
.. when != E
- memset(E,0,E1);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/m68k/mm/motorola.c: Eliminate NULL test and memset after alloc_bootmem

As noted by Akinobu Mita in patch b1fceac2b9e04d278316b2faddf276015fc06e3b,
alloc_bootmem and related functions never return NULL and always return a
zeroed region of memory.  Thus a NULL test or memset after calls to these
functions is unnecessary.

This was fixed using the following semantic patch.
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression E;
statement S;
@@

E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...)
.. when != E
(
- BUG_ON (E == NULL);
|
- if (E == NULL) S
)

@@
expression E,E1;
@@

E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...)
.. when != E
- memset(E,0,E1);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68k/Apollo: remove the unused APOLLO_ELPLUS option

Looking at older kernel sources the APOLLO_ELPLUS option was added
somewhere during kernel 2.1, but even kernel 2.2.0 does not contain
any driver that would be enabled through it...

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68k/Atari: remove the dead ATARI_SCC{,_DMA} options

It seems the driver was removed back in kernel 2.3 but the options were
forgotten.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68k/Mac: remove the unused ADB_KEYBOARD option

When the driver was removed back in 2002 the option was forgotten.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68k/apollo: Add missing call to apollo_parse_bootinfo()

Add the missing call to apollo_parse_bootinfo(), which had been lost from a
big Apollo support patch by Peter De Schrijver in 1999.

Thanks to Adrian Bunk for noticing!

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68k: remove stale ARCH_SUN4 #define

m68k: remove stale ARCH_SUN4 #define

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68k/sun3/: possible cleanups

This patch contains the following possible cleanups:
- make the following needlessly global code static:
  - config.c: sun3_bootmem_alloc()
  - config.c: sun3_sched_init()
  - dvma.c: dvma_page()
  - idprom.c: struct Sun_Machines[]
  - mmu_emu.c: struct ctx_alloc[]
  - sun3dvma.c: iommu_use[]
  - sun3ints.c: led_pattern[]
- remove the unused sbus.c

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68k/q40/config.c: make functions static

This patch makes the following needlessly global functions static:
- q40_reset()
- q40_halt()
- q40_disable_irqs()
- q40_gettimeoffset()
- q40_hwclk()
- q40_get_ss()
- q40_set_clock_mmss()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68k/mac/: possible cleanups

This patch contains the following possible cleanups:
- make the following needlessly global code (always) static:
  - baboon.c: struct baboon
  - baboon.c: baboon_irq()
  - config.c: mac_orig_videoaddr
  - config.c: mac_identify()
  - config.c: mac_report_hardware()
  - config.c: mac_debug_console_write()
  - config.c: mac_sccb_console_write()
  - config.c: mac_scca_console_write()
  - config.c: mac_init_scc_port()
  - oss.c: oss_irq()
  - oss.c: oss_nubus_irq()
  - psc.c: psc_debug_dump()
  - psc.c: psc_dma_die_die_die()
  - via.c: rbv_clear
- remove the unused bootparse.c
- #if 0 the following unused functions:
  - config.c: mac_debugging_short()
  - config.c: mac_debugging_long()
- remove the following unused code:
  - config.c: mac_bisize
  - config.c: mac_env
  - config.c: mac_SCC_init_done
  - config.c: mac_SCC_reset_done
  - config.c: mac_init_scca_port()
  - config.c: mac_init_sccb_port()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68k/atari/debug.c: possible cleanups

This patch contains the following possible cleanups:
- make the following needlessly global functions (always) static:
  - atari_mfp_console_write()
  - atari_scc_console_write()
  - atari_midi_console_write()
  - atari_init_mfp_port()
  - atari_init_scc_port()
  - atari_init_midi_port()
- #if 0 the following unused functions:
  - atari_mfp_console_wait_key()
  - atari_scc_console_wait_key()
  - atari_midi_console_wait_key()
- remove the following unused variables:
  - atari_MFP_init_done
  - atari_SCC_init_done

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68k/amiga/: possible cleanups

This patch contains the following possible cleanups:
- amiints.c: add a proper prototype for amiga_init_IRQ() in
             include/asm-m68k/amigaints.h
- make the following needlessly global code static:
  - config.c: amiga_model
  - config.c: amiga_psfreq
  - config.c: amiga_serial_console_write()
- #if 0 the following unused functions:
  - config.c: amiga_serial_puts()
  - config.c: amiga_serial_console_wait_key()
  - config.c: amiga_serial_gets()
- remove the following unused variable:
  - config.c: amiga_masterclock

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

export c2p

This patch fixes the following build error:

<--  snip  -->

..
  Building modules, stage 2.
  MODPOST 1203 modules
ERROR: "c2p" [drivers/video/amifb.ko] undefined!
..
make[2]: *** [__modpost] Error 1

<--  snip  -->

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

export amiga_vblank

This patch fixes the following build error:

<--  snip  -->

..
  Building modules, stage 2.
  MODPOST 1203 modules
ERROR: "amiga_vblank" [drivers/video/amifb.ko] undefined!
..
make[2]: *** [__modpost] Error 1

<--  snip  -->

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/c2p.c: add MODULE_LICENSE

This patch adds the missing MODULE_LICENSE("GPL").

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

atafb: Register Atari-specific video modes with sysfs

Register the Atari-specific video modes with sysfs, so you can see them in
/sys/class/graphics/fb0/modes and change the video mode by writing to
/sys/class/graphics/fb0/mode.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

amifb: Register Amiga-specific video modes with sysfs

Register the Amiga-specific video modes with sysfs, so you can see them in
/sys/class/graphics/fb0/modes and change the video mode by writing to
/sys/class/graphics/fb0/mode.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zorro: use memory_read_from_buffer

zorro: use memory_read_from_buffer

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ZORRO: Replace deprecated __initcall with equivalent device_initcall.

ZORRO: Replace deprecated __initcall with equivalent device_initcall.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68k: remove AP1000 code

Unless I miss something that's code for a sparc machine even the sparc
code no longer supports that got copied to m68k when these files were
copied.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68k: make multi_defconfig the default defconfig

It seems to match the intention behind multi_defconfig to make it the
default defconfig.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Stringify support commas

> This is a no-no for those archs that still use -traditional.
 > > I dunno if this is a problem for you at the moment and the
 > > right fix is anyway to nuke -traditional.
 > >
 > >     Sam

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68k: Allow no CPU/platform type for allnoconfig

Allow no CPU/platform type for allnoconfig
  - Provide a dummy value for FPSTATESIZE if no CPU type was selected
  - Provide a dummy value for NR_IRQS if no platform type was selected
  - Warn the user if no CPU or platform type was selected

Note: you still cannot build an allnoconfig kernel, as CONFIG_SWAP=n doesn't
build and we cannot easily fix that
(http://groups.google.com/group/linux.kernel/browse_thread/thread/d430c78b07e1827b)

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68k: vmlinux-std/sun3.lds.S cleanup - use PAGE_SIZE macro

This patch includes page.h header into linker script that
allow us to use PAGE_SIZE macro instead of numeric constant

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68k: Return -ENODEV if no device is found

According to the tests in do_initcalls(), the proper error code in case no
device is found is -ENODEV, not -ENXIO or -EIO.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ariadne: use netstats in net_device structure

Use net_device_stats from net_device structure instead of local.

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68k: remove CVS keywords

This patch removes CVS keywords that weren't updated for a long time
from comments.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'configfs-fixup-ptr-error' of git://oss.oracle.com/git/jlbec/linux-2.6

* 'configfs-fixup-ptr-error' of git://oss.oracle.com/git/jlbec/linux-2.6:
  configfs: Allow ->make_item() and ->make_group() to return detailed errors.
  Revert "configfs: Allow ->make_item() and ->make_group() to return detailed errors."

APCI: revert another duplicated patch

commit d1857056904d5f313f11184fcfa624652ff9620a ("ACPI: don't walk
tables if ACPI was disabled") is another superfluous duplicate commit
caused by git -> quilt -> git conversion.

Revert it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

APCI: revert duplicated patch

commit 816c2eda3ce8fa7eb62f22e01e2ec7a3f7d677c0 ("dock: bay: Don't call
acpi_walk_namespace() when ACPI is disabled.") was merged between
2.6.26-rc8 and -rc9)

Due to rebasing the ACPI tree via quilt the same patch got applied again
via commit cc7e51666d82aedfd6b9a033ca1a10d71c21f1ca ("dock: bay: Don't
call acpi_walk_namespace() when ACPI is disabled.")

Revert it, as it is obviously bogus.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix strip driver back up for ldisc/tty changes

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tty: add more tty_port fields

Move more bits into the tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

termios: Termios defines for other platforms

Fix up the termios of the people who have not yet got with the program

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cyclades: use tty_port

Switch cyclades to use the new tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tty: Clean up tiocmset

Reverse the order of one test and it gets much more readable

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

synclink: use tty_port

Switch the synclink ports to use the new tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

stallion: use tty_port

Switch the stallion driver to use the tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

atmel_serial: Fix tty_port breakage

The tty pointer has been moved into a tty_port field, so we need to use
->info->port.tty instead of just ->info->tty. Fixes these build errors:

David Brownell <david-b@pacbell.net> wrote:
> drivers/serial/atmel_serial.c: In function 'atmel_rx_from_ring':
> drivers/serial/atmel_serial.c:665: error: 'struct uart_info' has no member named 'tty'
> drivers/serial/atmel_serial.c: In function 'atmel_rx_from_dma':
> drivers/serial/atmel_serial.c:672: error: 'struct uart_info' has no member named 'tty'
> drivers/serial/atmel_serial.c: In function 'atmel_startup':
> drivers/serial/atmel_serial.c:797: error: 'struct uart_info' has no member named 'tty'
> make[2]: *** [drivers/serial/atmel_serial.o] Error 1

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rocket: use tty_port

Switch the rocketport to use the new tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mxser: use tty_port

Switch mxser to use the new tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

moxa: use tty_port

Switch MOXA to use the new tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

istallion: use tty_port

Switch istallion to use the new tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

isicom: use tty_port

Switch isicom to use a tty_port structure for some fields

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

riscom8: remove bogus checks

Chris Malley posted a patch removing a NULL check in the riscom8 driver.
Further analysis shows that even more of the tests are irrelevant so we
can delete lots of stuff

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

riscom8: use tty_port

Switch riscom8 to use the new tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gs: use tty_port

Switch drivers using the old "generic serial" driver to use the tty_port
structures

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

esp: use tty_port

Switch esp to use the new tty_port structures

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

epca: use tty_port

Switch the EPCA driver to include and begin using a tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tty.h: clean up

Coding style clean up and white space tidy

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix compile errors in SGI console drivers (linux-next tree)

The below is the patch to replace blindly all possible places,
including Jack's fixes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
(Reviewed and checked rather than blindly added)
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

- Fix compile errors in SGI console drivers (linux-next tree)

Fix compile errors in SGI console drivers caused by changes to the
tty_port structures in the linux-next tree.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ttydev: fix pamc_zilog for tty pointer move

Today's linux-next build (powerpc allyesconfig) failed like this:

drivers/serial/pmac_zilog.c: In function 'pmz_receive_chars':
drivers/serial/pmac_zilog.c:245: error: 'struct uart_info' has no member named 'tty'
drivers/serial/pmac_zilog.c:250: error: 'struct uart_info' has no member named 'tty'

I applied the patch below (which builds but may, or may not, be correct).
--
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ttydev: fix pamc_zilog for tty pointer move

Today's linux-next build (sparc64 defconfig) failed like this:

drivers/serial/sunhv.c: In function `receive_chars':
drivers/serial/sunhv.c:188: error: structure has no member named `tty'
drivers/serial/sunsu.c: In function `receive_chars':
drivers/serial/sunsu.c:314: error: structure has no member named `tty'
drivers/serial/sunsab.c: In function `receive_chars':
drivers/serial/sunsab.c:121: error: structure has no member named `tty'

I applied the following patch (which, again, may not be correct).

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MN10300: Fix MN10300's serial port driver to get at its tty_struct

Fix MN10300's serial port driver to get at its tty_struct as this moved
from struct uart_info into struct tty_port in patch:

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

serial: use tty_port

Switch the serial_core based drivers to use the new tty_port structure.
We can't quite use all of it yet because of the dynamically allocated
extras in the serial_core layer.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tty: Introduce a tty_port common structure

Every tty driver has its own concept of a port structure and because
they all differ we cannot extract commonality.  Begin fixing this by
creating a structure drivers can elect to use so that over time we can
push fields into this and create commonality and then introduce common
methods.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/serial/: remove CVS keywords

This patch removes CVS keywords that weren't updated for a long time in
comments, printk's and MODULE_DESCRIPTION's (no printk's or
MODULE_DESCRIPTION's are completely removed).

While doing this I also found and fixed a missing \n in a printk
in m32r_sio.c

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/char/rio/: remove VCS tags

This patch removes ancient VCS tags (either protected
by #ifdef SCCS_LABELS or commented out).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tty: Ldisc revamp

Move the line disciplines towards a conventional ->ops arrangement.  For
the moment the actual 'tty_ldisc' struct in the tty is kept as part of
the tty struct but this can then be changed if it turns out that when it
all settles down we want to refcount ldiscs separately to the tty.

Pull the ldisc code out of /proc and put it with our ldisc code.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tty: isicom, enable/disable pci device

Don't forget to enable and disable PCI devices.  The device might be
unusable without that.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Subject: [PATCH 2/2] atmel_serial: Implement flush_buffer() hook

Avoid dumping garbage to the serial port when the tty is flushed. This
tends to happen when rebooting from a serial console.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Subject: [PATCH 1/2] serial: Add flush_buffer() operation to uart_ops

Serial drivers using DMA (like the atmel_serial driver) tend to get very
confused when the xmit buffer is flushed and nobody told them.  They
also tend to spew a lot of garbage since the DMA engine keeps running
after the buffer is flushed and possibly refilled with unrelated data.

This patch adds a new flush_buffer operation to the uart_ops struct,
along with a call to it from uart_flush_buffer() right after the xmit
buffer has been cleared. The driver can implement this in order to
syncronize its internal DMA state with the xmit buffer when the buffer
is flushed.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

simserial: Fix up for ldisc changes

Noted by Tony Luck although I've done the patches differently and also
removed some other bogus oddments.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

configfs: Allow ->make_item() and ->make_group() to return detailed errors.

The configfs operations ->make_item() and ->make_group() currently
return a new item/group.  A return of NULL signifies an error.  Because
of this, -ENOMEM is the only return code bubbled up the stack.

Multiple folks have requested the ability to return specific error codes
when these operations fail.  This patch adds that ability by changing the
->make_item/group() ops to return ERR_PTR() values.  These errors are
bubbled up appropriately.  NULL returns are changed to -ENOMEM for
compatibility.

Also updated are the in-kernel users of configfs.

This is a rework of reverted commit 11c3b79218390a139f2d474ee1e983a672d5839a.

Signed-off-by: Joel Becker <joel.becker@oracle.com>

Revert "configfs: Allow ->make_item() and ->make_group() to return detailed errors."

This reverts commit 11c3b79218390a139f2d474ee1e983a672d5839a.  The code
will move to PTR_ERR().

Signed-off-by: Joel Becker <joel.becker@oracle.com>

Merge branch 'upstream-linus' of git://git./linux/kernel/git/mfasheh/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  [PATCH] ocfs2: fix oops in mmap_truncate testing
  configfs: call drop_link() to cleanup after create_link() failure
  configfs: Allow ->make_item() and ->make_group() to return detailed errors.
  configfs: Fix failing mkdir() making racing rmdir() fail
  configfs: Fix deadlock with racing rmdir() and rename()
  configfs: Make configfs_new_dirent() return error code instead of NULL
  configfs: Protect configfs_dirent s_links list mutations
  configfs: Introduce configfs_dirent_lock
  ocfs2: Don't snprintf() without a format.
  ocfs2: Fix CONFIG_OCFS2_DEBUG_FS #ifdefs
  ocfs2/net: Silence build warnings on sparc64
  ocfs2: Handle error during journal load
  ocfs2: Silence an error message in ocfs2_file_aio_read()
  ocfs2: use simple_read_from_buffer()
  ocfs2: fix printk format warnings with OCFS2_FS_STATS=n
  [PATCH 2/2] ocfs2: Instrument fs cluster locks
  [PATCH 1/2] ocfs2: Add CONFIG_OCFS2_FS_STATS config option

Merge git://git./linux/kernel/git/brodo/pcmcia-fixes-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6:
  pcmcia: ide-cs: Remove outdated comment
  pcmcia: fix cisinfo_t removal
  pcmcia: fix return value in cm4000_cs.c

Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: fix asm/e820.h for userspace inclusion
  x86: fix numaq_tsc_disable
  x86: fix kernel_physical_mapping_init() for large x86 systems

Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ftrace: do not trace library functions
  ftrace: do not trace scheduler functions
  ftrace: fix lockup with MAXSMP
  ftrace: fix merge buglet

x86: fix asm/e820.h for userspace inclusion

asm-x86/e820.h is included from userspace.  'x86: make e820.c to have
common functions' (b79cd8f1268bab57ff85b19d131f7f23deab2dee) broke it:

make -C Documentation/lguest
cc -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include
lguest.c  -lz -o lguest
In file included from ../../include/asm-x86/bootparam.h:8,
                 from lguest.c:45:
../../include/asm/e820.h:66: error: expected ‘)’ before ‘start’
../../include/asm/e820.h:67: error: expected ‘)’ before ‘start’
../../include/asm/e820.h:68: error: expected ‘)’ before ‘start’
../../include/asm/e820.h:72: error: expected ‘=’, ‘,’, ‘;’, ‘asm’
or ‘__attribute__’ before ‘e820_update_range’
...

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: fix numaq_tsc_disable

fix:

 arch/x86/kernel/numaq_32.c: In function ‘numaq_tsc_disable’:
 arch/x86/kernel/numaq_32.c:99: warning: ‘return’ with a value, in function returning void

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'linus' into x86/urgent

fix build error of arch/ia64/kvm/*

Fix calls of smp_call_function*() in arch/ia64/kvm for recent API
changes.

    CC [M]  arch/ia64/kvm/kvm-ia64.o
  arch/ia64/kvm/kvm-ia64.c: In function 'handle_global_purge':
  arch/ia64/kvm/kvm-ia64.c:398: error: too many arguments to function 'smp_call_function_single'
  arch/ia64/kvm/kvm-ia64.c: In function 'kvm_vcpu_kick':
  arch/ia64/kvm/kvm-ia64.c:1696: error: too many arguments to function 'smp_call_function_single'

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'ptrace-cleanup' of git://git./linux/kernel/git/frob/linux-2.6-utrace

* 'ptrace-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-utrace:
  fix dangling zombie when new parent ignores children
  do_wait: return security_task_wait() error code in place of -ECHILD
  ptrace children revamp
  do_wait reorganization

Update scripts/Makefile.fwinst to cope with older make

Also fix unwanted rebuilds of the firmware/ihex2fw tool by including
the .ihex2fw.cmd file when present.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reported-and-tested-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git390.osdl.marist.edu/linux-2.6

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] dasd: use -EOPNOTSUPP instead of -ENOTSUPP
  [S390] qdio: new qdio driver.
  [S390] cio: Export chsc_error_from_response().
  [S390] vmur: Fix return code handling.
  [S390] Fix stacktrace compile bug.
  [S390] Increase default warning stacksize.
  [S390] dasd: Fix cleanup in dasd_{fba,diag}_check_characteristics().
  [S390] chsc headers userspace cleanup
  [S390] dasd: fix unsolicited SIM handling.
  [S390] zfcpdump: Make SCSI disk dump tool recognize storage holes

Fix collateral damage to top level Makefile

The patch named "powerpc/mpc5121: Add clock driver", also contained
an unrelated and bogus change to the top-level makefile.  This patch
backs out the bad bit.

SHA1 of offending patch: 137e95906e294913fab02162e8a1948ade49acb5)

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Repented-by: John Rigby <jrigby@freescale.com>
[ Heh. Normally I pick these out from the diffstats, but I guess
  I've grown to trust the ppc tree too much ;)   - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ftrace: do not trace library functions

make function tracing more robust: do not trace library functions.

We've already got a sizable list of exceptions:

 ifdef CONFIG_FTRACE
 # Do not profile string.o, since it may be used in early boot or vdso
 CFLAGS_REMOVE_string.o = -pg
 # Also do not profile any debug utilities
 CFLAGS_REMOVE_spinlock_debug.o = -pg
 CFLAGS_REMOVE_list_debug.o = -pg
 CFLAGS_REMOVE_debugobjects.o = -pg
 CFLAGS_REMOVE_find_next_bit.o = -pg
 CFLAGS_REMOVE_cpumask.o = -pg
 CFLAGS_REMOVE_bitmap.o = -pg
 endif

... and the pattern has been that random library functionality showed
up in ftrace's critical path (outside of its recursion check), causing
hard to debug lockups.

So be a bit defensive about it and exclude all lib/*.o functions by
default. It's not that they are overly interesting for tracing purposes
anyway. Specific ones can still be traced, in an opt-in manner.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

ftrace: do not trace scheduler functions

do not trace scheduler functions - it's still a bit fragile
and can lock up with:

  http://redhat.com/~mingo/misc/config-Thu_Jul_17_13_34_52_CEST_2008

Signed-off-by: Ingo Molnar <mingo@elte.hu>

ftrace: fix lockup with MAXSMP

MAXSMP brings in lots of use of various bitops in smp_processor_id()
and friends - causing ftrace to lock up during bootup:

  calling  anon_inode_init+0x0/0x130
  initcall anon_inode_init+0x0/0x130 returned 0 after 0 msecs
  calling  acpi_event_init+0x0/0x57
  [ hard hang ]

So exclude the bitops facilities from tracing.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

[S390] dasd: use -EOPNOTSUPP instead of -ENOTSUPP

return value -ENOTSUPP is not valid in userspace context, use
-EOPNOTSUPP instead

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

[S390] qdio: new qdio driver.

List of major changes:
- split qdio driver into several files
- seperation of thin interrupt code
- improved handling for multiple thin interrupt devices
- inbound and outbound processing now always runs in tasklet context
- significant less tasklet schedules per interrupt needed
- merged qebsm with non-qebsm handling
- cleanup qdio interface and added kerneldoc
- coding style

Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Utz Bacher <utz.bacher@de.ibm.com>
Reviewed-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

[S390] cio: Export chsc_error_from_response().

Make chsc_error_from_response() available to chsc callers outside
of chsc.c (namely qdio) to avoid duplicating error checking code.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

[S390] vmur: Fix return code handling.

Use -EOPNOTSUPP instead of -ENOTSUPP.

Signed-off-by: Frank Munzert <munzert@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] Fix stacktrace compile bug.

Add missing module.h include to fix this:

  CC      arch/s390/kernel/stacktrace.o
arch/s390/kernel/stacktrace.c:84: warning: data definition has no type or storage class
arch/s390/kernel/stacktrace.c:84: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
arch/s390/kernel/stacktrace.c:84: warning: parameter names (without types) in function declaration
arch/s390/kernel/stacktrace.c:97: warning: data definition has no type or storage class
arch/s390/kernel/stacktrace.c:97: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
arch/s390/kernel/stacktrace.c:97: warning: parameter names (without types) in function declaration

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] Increase default warning stacksize.

Compiling a kernel with allmodconfig or allyesconfig results in tons
of gcc warnings, because the default maximum stacksize from which on
gcc will emit a warning is just 256 bytes.
Increase this to 2048, so these warnings don't distract from the real
warnings that we need to watch at.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] dasd: Fix cleanup in dasd_{fba,diag}_check_characteristics().

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] chsc headers userspace cleanup

Kernel headers shouldn't expose functions to userspace.

Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] dasd: fix unsolicited SIM handling.

Add missing schedule_bh and check that there is 32 bit sense data.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] zfcpdump: Make SCSI disk dump tool recognize storage holes

The kernel part of zfcpdump establishes a new debugfs file zcore/memmap
which exports information on memory layout (start address and length of each
memory chunk) to its userspace counterpart.

Signed-off-by: Frank Munzert <munzert@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>

ftrace: fix merge buglet

-tip testing found a bootup hang here:

  initcall anon_inode_init+0x0/0x130 returned 0 after 0 msecs
  calling  acpi_event_init+0x0/0x57

the bootup should have continued with:

  initcall acpi_event_init+0x0/0x57 returned 0 after 45 msecs

but it hung hard there instead.

bisection led to this commit:

| commit 5806b81ac1c0c52665b91723fd4146a4f86e386b
| Merge: d14c8a6... 6712e29...
| Author: Ingo Molnar <mingo@elte.hu>
| Date:   Mon Jul 14 16:11:52 2008 +0200
|     Merge branch 'auto-ftrace-next' into tracing/for-linus

turns out that i made this mistake in the merge:

  ifdef CONFIG_FTRACE
  # Do not profile debug utilities
  CFLAGS_REMOVE_tsc_64.o = -pg
  CFLAGS_REMOVE_tsc_32.o = -pg

those two files got unified meanwhile - so the dont-profile annotation
got lost. The proper rule is:

  CFLAGS_REMOVE_tsc.o = -pg

i guess this could have been caught sooner if the CFLAGS_REMOVE* kbuild
rule aborted the build if it met a target that does not exist anymore?

Signed-off-by: Ingo Molnar <mingo@elte.hu>

fix dangling zombie when new parent ignores children

This fixes an arcane bug that we think was a regression introduced
by commit b2b2cbc4b2a2f389442549399a993a8306420baf.  When a parent
ignores SIGCHLD (or uses SA_NOCLDWAIT), its children would self-reap
but they don't if it's using ptrace on them.  When the parent thread
later exits and ceases to ptrace a child but leaves other live
threads in the parent's thread group, any zombie children are left
dangling.  The fix makes them self-reap then, as they would have
done earlier if ptrace had not been in use.

Signed-off-by: Roland McGrath <roland@redhat.com>

do_wait: return security_task_wait() error code in place of -ECHILD

This reverts the effect of commit f2cc3eb133baa2e9dc8efd40f417106b2ee520f3
"do_wait: fix security checks".  That change reverted the effect of commit
73243284463a761e04d69d22c7516b2be7de096c.  The rationale for the original
commit still stands.  The inconsistent treatment of children hidden by
ptrace was an unintended omission in the original change and in no way
invalidates its purpose.

This makes do_wait return the error returned by security_task_wait()
(usually -EACCES) in place of -ECHILD when there are some children the
caller would be able to wait for if not for the permission failure.  A
permission error will give the user a clue to look for security policy
problems, rather than for mysterious wait bugs.

Signed-off-by: Roland McGrath <roland@redhat.com>

ptrace children revamp

ptrace no longer fiddles with the children/sibling links, and the
old ptrace_children list is gone.  Now ptrace, whether of one's own
children or another's via PTRACE_ATTACH, just uses the new ptraced
list instead.

There should be no user-visible difference that matters.  The only
change is the order in which do_wait() sees multiple stopped
children and stopped ptrace attachees.  Since wait_task_stopped()
was changed earlier so it no longer reorders the children list, we
already know this won't cause any new problems.

Signed-off-by: Roland McGrath <roland@redhat.com>

do_wait reorganization

This breaks out the guts of do_wait into three subfunctions.
The control flow is less nonobvious without so much goto.
do_wait_thread and ptrace_do_wait contain the main work of the outer loop.
wait_consider_task contains the main work of the inner loop.

Signed-off-by: Roland McGrath <roland@redhat.com>

scsi_dh: Verify "dev" is a sdev before accessing it.

Before accessing the device data structure in hardware handlers,
make sure it is a indeed a sdev device.

Yinghai Lu <yhlu.kernel@gmail.com> found the bug on Jul 16, 2008,
and later tested/verified the following fix.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'linux-next' of git://git./linux/kernel/git/jbarnes/pci-2.6

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (72 commits)
  Revert "x86/PCI: ACPI based PCI gap calculation"
  PCI: remove unnecessary volatile in PCIe hotplug struct controller
  x86/PCI: ACPI based PCI gap calculation
  PCI: include linux/pm_wakeup.h for device_set_wakeup_capable
  PCI PM: Fix pci_prepare_to_sleep
  x86/PCI: Fix PCI config space for domains > 0
  Fix acpi_pm_device_sleep_wake() by providing a stub for CONFIG_PM_SLEEP=n
  PCI: Simplify PCI device PM code
  PCI PM: Introduce pci_prepare_to_sleep and pci_back_from_sleep
  PCI ACPI: Rework PCI handling of wake-up
  ACPI: Introduce new device wakeup flag 'prepared'
  ACPI: Introduce acpi_device_sleep_wake function
  PCI: rework pci_set_power_state function to call platform first
  PCI: Introduce platform_pci_power_manageable function
  ACPI: Introduce acpi_bus_power_manageable function
  PCI: make pci_name use dev_name
  PCI: handle pci_name() being const
  PCI: add stub for pci_set_consistent_dma_mask()
  PCI: remove unused arch pcibios_update_resource() functions
  PCI: fix pci_setup_device()'s sprinting into a const buffer
  ...

Fixed up conflicts in various files (arch/x86/kernel/setup_64.c,
arch/x86/pci/irq.c, arch/x86/pci/pci.h, drivers/acpi/sleep/main.c,
drivers/pci/pci.c, drivers/pci/pci.h, include/acpi/acpi_bus.h) from x86
and ACPI updates manually.