Lennart Poettering [Wed, 15 Jun 2016 20:32:33 +0000 (22:32 +0200)]
resolved: make use of set_put_strdupv() where appropriate
Lennart Poettering [Wed, 15 Jun 2016 20:30:11 +0000 (22:30 +0200)]
resolved: make sure that route-only domains are never added to /etc/resolv.conf
After all, /etc/resolv.conf doesn't know the concept of "route-only domains",
hence the domains should really not appear there.
Lennart Poettering [Wed, 15 Jun 2016 20:25:48 +0000 (22:25 +0200)]
string-table: make sure DEFINE_STRING_TABLE_LOOKUP_WITH_BOOLEAN() handles NULL strings nicely
xyz_from_string() functions defined with DEFINE_STRING_TABLE_LOOKUP() properly
handle NULL strings already. make sure the equivalent functions defined with
DEFINE_STRING_TABLE_LOOKUP_WITH_BOOLEAN() do the same.
Lennart Poettering [Wed, 15 Jun 2016 19:43:36 +0000 (21:43 +0200)]
resolve: add "systemd-resolve --status" command
The new command shows the per-link and global DNS configuration currently in
effect. This is useful to quickly see the DNS settings resolved acquired from
networkd and that was pushed into it via the bus APIs.
Lennart Poettering [Wed, 15 Jun 2016 19:38:41 +0000 (21:38 +0200)]
resolved: export the effective per-link DNSSEC setting, not the internal one
Internally, we store the per-link DNSSEC setting as -1 (invalid) if there's no
link-specific setting configured, and the global setting should be used. When
exporting this one the bus we really should export the effective DNSSEC
setting however, i.e. return the global one if there's non set per-link.
Lennart Poettering [Wed, 15 Jun 2016 19:37:51 +0000 (21:37 +0200)]
resolved: export global NTAs on the bus
We export them per-link, hence let's export the global NTAs too.
Lennart Poettering [Wed, 15 Jun 2016 19:36:57 +0000 (21:36 +0200)]
networkd: fix bad memory access when parsing DNSSECNegativeTrustAnchors=
Evgeny Vereshchagin [Mon, 20 Jun 2016 18:40:46 +0000 (21:40 +0300)]
core: log the right set of the supported controllers (#3558)
Jun 16 05:12:08 systemd[1]: Controller 'io' supported: yes
Jun 16 05:12:08 systemd[1]: Controller 'memory' supported: yes
Jun 16 05:12:08 systemd[1]: Controller 'pids' supported: yes
instead of
Jun 16 04:06:50 systemd[1]: Controller 'memory' supported: yes
Jun 16 04:06:50 systemd[1]: Controller 'devices' supported: yes
Jun 16 04:06:50 systemd[1]: Controller 'pids' supported: yes
Ronny Chevalier [Mon, 20 Jun 2016 07:41:06 +0000 (08:41 +0100)]
Merge pull request #3564 from evverx/valgrind-tests-fixes
tests: fix memory leak, don't run test_get_process_cmdline_harder under valgrind
Evgeny Vereshchagin [Sun, 19 Jun 2016 23:43:35 +0000 (23:43 +0000)]
tests: don't run test_get_process_cmdline_harder under valgrind
See https://github.com/systemd/systemd/pull/3555#issuecomment-
226564908
Lukáš Nykrýn [Sun, 19 Jun 2016 17:22:46 +0000 (19:22 +0200)]
man: match runlevel symlinks recommendation with our makefile (#3563)
In makefile we create symlinks runlevel5.target to graphical.target and
runlevel2-4.target to multi-user.target. Let's say the same thing in
systemd.special manpage.
Evgeny Vereshchagin [Sun, 19 Jun 2016 15:02:51 +0000 (15:02 +0000)]
tests: fix memory leak in test-keymap-util
Fixes:
==27917== 3 bytes in 1 blocks are definitely lost in loss record 1 of 1
==27917== at 0x4C28BF6: malloc (vg_replace_malloc.c:299)
==27917== by 0x55083D9: strdup (in /usr/lib64/libc-2.22.so)
==27917== by 0x1140DA: find_converted_keymap (keymap-util.c:524)
==27917== by 0x110844: test_find_converted_keymap (test-keymap-util.c:52)
==27917== by 0x1124FE: main (test-keymap-util.c:213)
==27917==
Dave Reisner [Fri, 10 Jun 2016 13:50:16 +0000 (09:50 -0400)]
Ensure kdbus isn't used (#3501)
Delete the dbus1 generator and some critical wiring. This prevents
kdbus from being loaded or detected. As such, it will never be used,
even if the user still has a useful kdbus module loaded on their system.
Sort of fixes #3480. Not really, but it's better than the current state.
Lennart Poettering [Fri, 17 Jun 2016 09:38:56 +0000 (11:38 +0200)]
Merge pull request #3557 from whot/hwdb-updates
Hwdb updates
Peter Hutterer [Fri, 17 Jun 2016 01:00:45 +0000 (11:00 +1000)]
Revert "hwdb: change the Logitech MX500 to 1100 dpi (#3517)"
Likely bad measurement and all other websites refer to it being 1000dpi.
See https://bugs.freedesktop.org/show_bug.cgi?id=96225#c13
This reverts commit
e7b90ddc345d1817ca48bfcc4e3e73836c8051af.
Peter Hutterer [Thu, 16 Jun 2016 00:24:51 +0000 (10:24 +1000)]
hwdb: touchpad ranges for Dell Precision M4700
From https://bugs.freedesktop.org/show_bug.cgi?id=95417
Lennart Poettering [Thu, 16 Jun 2016 20:46:44 +0000 (22:46 +0200)]
process-util: fix two bugs in get_process_cmdline() (#3555)
See:
https://github.com/systemd/systemd/pull/3529#issuecomment-
226421007
Lennart Poettering [Thu, 16 Jun 2016 16:40:53 +0000 (18:40 +0200)]
Merge pull request #3546 from keszybz/systemctl-fixes
Systemctl fixes
Lennart Poettering [Thu, 16 Jun 2016 16:37:11 +0000 (18:37 +0200)]
resolved: when restarting a transaction make sure to not touch it anymore (#3553)
dns_transaction_maybe_restart() is supposed to return 1 if the the transaction
has been restarted and 0 otherwise. dns_transaction_process_dnssec() relies on
this behaviour. Before this change in case of restart we'd call
dns_transaction_go() when restarting the lookup, returning its return value
unmodified. This is wrong however, as that function returns 1 if the
transaction is pending, and 0 if it completed immediately, which is a very
different set of return values. Fix this, by always returning 1 on redirection.
The wrong return value resulted in all kinds of bad memory accesses as we might
continue processing a transaction that was redirected and completed immediately
(and thus freed).
This patch also adds comments to the two functions to clarify the return values
for the future.
Most likely fixes: #2942 #3475 #3484
Lennart Poettering [Thu, 16 Jun 2016 14:48:16 +0000 (16:48 +0200)]
update TODO
Zbigniew Jędrzejewski-Szmek [Wed, 15 Jun 2016 13:11:32 +0000 (09:11 -0400)]
systemctl: delay pager/polkit agent opening as much as possible
In https://github.com/systemd/systemd/issues/3543, we would open the pager
before starting ssh, and the pipe fd was "leaked" into the ssh child as the
stderr fd. Previous commit fixes bus-socket to nullify stderr before launching
the child, but it seems reasonable to also delay starting the pager.
If we are going to croak when trying to open the transport, it seems better
to do this before starting the pager.
This commit would also fix #3543 on its own.
Lennart Poettering [Thu, 16 Jun 2016 13:29:16 +0000 (15:29 +0200)]
systemctl: make sure we terminate the bus connection first, and then close the pager (#3550)
If "systemctl -H" is used, let's make sure we first terminate the bus
connection, and only then close the pager. If done in this order ssh will get
an EOF on stdin (as we speak D-Bus through ssh's stdin/stdout), and then
terminate. This makes sure the standard error we were invoked on is released by
ssh, and only that makes sure we don't deadlock on the pager which waits for
all clients closing its input pipe.
(Similar fixes for the various other xyzctl tools that support both pagers and
-H)
Fixes: #3543
Zbigniew Jędrzejewski-Szmek [Thu, 16 Jun 2016 13:15:45 +0000 (09:15 -0400)]
Merge pull request #3511 from andir/networkd-vrf
networkd: add support for vrf interfaces (#3316)
Lennart Poettering [Thu, 16 Jun 2016 11:56:23 +0000 (13:56 +0200)]
Merge pull request #3481 from poettering/relative-memcg
various changes, most importantly regarding memory metrics
Zbigniew Jędrzejewski-Szmek [Thu, 16 Jun 2016 01:30:59 +0000 (21:30 -0400)]
Merge pull request #3537 from poettering/journal-stream-env
Permit services to detect whether their stdout/stderr is connected to the journal.
Andreas Rammhold [Sun, 12 Jun 2016 23:05:49 +0000 (01:05 +0200)]
networkd: vrf: add support for enslaving devices to VRFs
Andreas Rammhold [Thu, 9 Jun 2016 23:57:51 +0000 (01:57 +0200)]
networkd: added support for vrf interfaces (#3316)
Zbigniew Jędrzejewski-Szmek [Wed, 15 Jun 2016 21:02:27 +0000 (17:02 -0400)]
load-fragment: ignore ENOTDIR/EACCES errors (#3510)
If for whatever reason the file system is "corrupted", we want
to be resilient and ignore the error, as long as we can load the units
from a different place.
Arch bug https://bugs.archlinux.org/task/49547.
A user had an ntfs symlink (essentially a file) instead of a directory after
restoring from backup. We should just ignore that like we would treat a missing
directory, for general resiliency.
We should treat permission errors similarly. For example an unreadable
/usr/local/lib directory would prevent (user) instances of systemd from
loading any units. It seems better to continue.
Lennart Poettering [Tue, 14 Jun 2016 14:50:45 +0000 (16:50 +0200)]
core: set $JOURNAL_STREAM to the dev_t/ino_t of the journal stream of executed services
This permits services to detect whether their stdout/stderr is connected to the
journal, and if so talk to the journal directly, thus permitting carrying of
metadata.
As requested by the gtk folks: #2473
Lennart Poettering [Tue, 14 Jun 2016 14:50:35 +0000 (16:50 +0200)]
execute: minor coding style improvements
Zbigniew Jędrzejewski-Szmek [Wed, 15 Jun 2016 14:03:33 +0000 (10:03 -0400)]
systemctl: also fall back to ListUnitsFiltered on access denied
When running systemctl from git on systemd from systemd-229-8.fc24.x86_64,
ListUnitsByPatterns results in org.freedesktop.DBus.Error.AccessDenied.
Zbigniew Jędrzejewski-Szmek [Wed, 15 Jun 2016 12:21:15 +0000 (08:21 -0400)]
systemctl: do not open pager twice
Second attempt had no effect anyway.
Kai Ruhnau [Wed, 15 Jun 2016 10:33:24 +0000 (12:33 +0200)]
socket-util: Run the fallback when the kernel complains about the null buffer (#3541)
Calling recv with a NULL buffer returns EFAULT instead of EOPNOTSUPP on
older kernels (3.14).
Fixes #3407
Signed-off-by: Kai Ruhnau <kai.ruhnau@target-sg.com>
Zbigniew Jędrzejewski-Szmek [Wed, 15 Jun 2016 01:08:36 +0000 (21:08 -0400)]
Merge pull request #3540 from poettering/resolved-various
three resolved fixes
Lennart Poettering [Tue, 14 Jun 2016 23:26:01 +0000 (01:26 +0200)]
tree-wide: htonl() is weird, let's use htobe32() instead (#3538)
Super-important change, yeah!
Lennart Poettering [Tue, 14 Jun 2016 21:52:29 +0000 (23:52 +0200)]
util-lib: rework get_process_cmdline() (#3529)
This reworks get_process_cmdline() quite substantially, fixing the following:
- Fixes:
https://github.com/systemd/systemd/pull/3512/commits/
a4e3bf4d7ac2de51191ce136ee9361ba319e106c#r66837630
- The passed max_length is also applied to the "comm" name, if comm_fallback is
set.
- The right thing happens if max_length == 1 is specified
- when the cmdline "foobar" is abbreviated to 6 characters the result is not
"foobar" instead of "foo...".
- trailing whitespace are removed before the ... suffix is appended. The 7
character abbreviation of "foo barz" is hence "foo..." instead of "foo ...".
- leading whitespace are suppressed from the cmdline
- a comprehensive test case is added
Lennart Poettering [Tue, 14 Jun 2016 21:41:00 +0000 (23:41 +0200)]
Merge pull request #3539 from keszybz/udevadm-man-fix
Udevadm man fix
Lennart Poettering [Tue, 14 Jun 2016 21:37:16 +0000 (23:37 +0200)]
resolved: in the ResolveHostname() bus call, accept IP addresses with scope
When we get a literal IP address as string that includes a zone suffix, process
this properly and return the parsed ifindex back to the client, and include it
in the canonical name in case of a link-local IP address.
Lennart Poettering [Tue, 14 Jun 2016 21:28:54 +0000 (23:28 +0200)]
resolved: make sure we initialize the ifindex of direct zone answers properly
Previously, after checking the local zone for a reply and finding one we'd not
initialize the answer ifindex from that. Let's fix that.
Lennart Poettering [Tue, 14 Jun 2016 21:27:30 +0000 (23:27 +0200)]
resolve: port resolve tool to in_addr_ifindex_{from_string_auto|to_string}()
We can reuse some code here, so let's do it.
Zbigniew Jędrzejewski-Szmek [Tue, 14 Jun 2016 21:11:46 +0000 (17:11 -0400)]
man: fix option letter in udevadm control -e
-x never worked, so let's just correct the man page.
Fixes #3524.
Zbigniew Jędrzejewski-Szmek [Tue, 14 Jun 2016 21:05:42 +0000 (17:05 -0400)]
udevadm: trivial simplification
Lennart Poettering [Thu, 9 Jun 2016 14:15:07 +0000 (16:15 +0200)]
update TODO
Lennart Poettering [Thu, 9 Jun 2016 17:53:45 +0000 (19:53 +0200)]
unit: properly comment generated comments in unit files
Fix-up for
2a9a6f8ac04a69ca36d645f9305a33645f22a22b
Lennart Poettering [Thu, 9 Jun 2016 17:49:48 +0000 (19:49 +0200)]
sd-ndisc: add missing cast
Apparently newer gcc versions are a bit more forgiving when assigning an
"unsigned char*" pointer to something of a different type. Let's add the
missing cast so that old gcc versions are fine, too.
Lennart Poettering [Wed, 8 Jun 2016 18:52:06 +0000 (20:52 +0200)]
systemctl: allow percent-based MemoryLimit= settings via systemctl set-property
The unit files already accept relative, percent-based memory limit
specification, let's make sure "systemctl set-property" support this too.
Since we want the physical memory size of the destination machine to apply we
pass the percentage in a new set of properties that only exist for this
purpose, and can only be set.
Lennart Poettering [Wed, 8 Jun 2016 18:45:32 +0000 (20:45 +0200)]
util: introduce physical_memory_scale() to unify how we scale by physical memory
The various bits of code did the scaling all different, let's unify this,
given that the code is not trivial.
Lennart Poettering [Wed, 8 Jun 2016 18:05:14 +0000 (20:05 +0200)]
core: make sure to use "infinity" in unit files, not "max"
THe latter is a kernelism, we only understand "infinity".
Lennart Poettering [Wed, 8 Jun 2016 18:04:22 +0000 (20:04 +0200)]
core: when receiving a memory limit via the bus, refuse 0
When parsing unit files we already refuse unit memory limits of zero, let's
also refuse it when the value is set via the bus.
Lennart Poettering [Wed, 8 Jun 2016 17:37:42 +0000 (19:37 +0200)]
man: minor fixes
Lennart Poettering [Wed, 8 Jun 2016 17:36:09 +0000 (19:36 +0200)]
core: optionally, accept a percentage value for MemoryLimit= and related settings
If a percentage is used, it is taken relative to the installed RAM size. This
should make it easier to write generic unit files that adapt to the local system.
Lennart Poettering [Wed, 8 Jun 2016 17:25:38 +0000 (19:25 +0200)]
util-lib: introduce parse_percent() for parsing percent specifications
And port a couple of users over to it.
Lennart Poettering [Wed, 8 Jun 2016 16:56:20 +0000 (18:56 +0200)]
util: when determining the amount of memory on this system, take cgroup limit into account
When determining the amount of RAM in the system, let's make sure we also read
the root-level cgroup memory limit into account. This isn't particularly useful
on the host, but in containers it makes sure that whatever memory the container
got assigned is actually used for RAM size calculations.
Susant Sahani [Tue, 14 Jun 2016 17:11:57 +0000 (22:41 +0530)]
networkd: Tunnel add support to configure key for VTI/VTI6 (#3532)
fixes #3298
Daniel Mack [Tue, 14 Jun 2016 12:25:43 +0000 (14:25 +0200)]
Merge pull request #3527 from poettering/systemctl-fixes
Systemctl fixes
Lukáš Nykrýn [Tue, 14 Jun 2016 12:20:56 +0000 (14:20 +0200)]
manager: reduce complexity of unit_gc_sweep (#3507)
When unit is marked as UNSURE, we are trying to find if it state was
changed over and over again. So lets not go through the UNSURE states
again. Also when we find a GOOD unit lets propagate the GOOD state to
all units that this unit reference.
This is a problem on machines with a lot of initscripts with different
starting priority, since those units will reference each other and the
original algorithm might get to n! complexity.
Thanks HATAYAMA Daisuke for the expand_good_state code.
Evgeny Vereshchagin [Tue, 14 Jun 2016 12:08:01 +0000 (15:08 +0300)]
core: on unified we don't need to check u->pids: we can use proper notifications (#3531)
Fixes: #3483
Andrew Jeddeloh [Tue, 14 Jun 2016 09:09:06 +0000 (02:09 -0700)]
build: fix missing symbol for old kernel headers (#3530)
Fix issue where IN6_ADDR_GEN_MODE_STABLE_PRIVACY is undefined but
IFLA_INET6_ADDR_GEN_MODE is defined and thus the former does not get
fixed in missing.h. This occurs with kernel headers new enough to have
the IFLA_INET6_ADDR_GEN_MODE but old enough to not yet have
IN6_ADDR_GEN_MODE_STABLE_PRIVACY (e.g. 3.18).
Lennart Poettering [Mon, 13 Jun 2016 17:11:26 +0000 (19:11 +0200)]
systemctl: rework "systemctl status" a bit
This reworks "systemctl status" and "systemctl show" a bit. It removes the
definition of the `property_info` structure, because we can simply reuse the
existing UnitStatusInfo type for that.
The "could not be found" message is now printed by show_one() itself (and not
its caller), so that it is shown regardless by who the function is called.
(This makes it necessary to pass the unit name to the function.)
This also adds all properties found to a set, and then checks if any of the
properties passed via "--property=" is mising in it, if so, a proper error is
generated.
Support for checking the PID file of a unit is removed, as this cannot be done
reasonably client side (since the systemd instance we are talking to might sit
on another host)
Replaces: #3411
Fixes: #3425
Also see: #3504
Lennart Poettering [Mon, 13 Jun 2016 16:54:36 +0000 (18:54 +0200)]
systemctl: fix assertion hit when showing state of a unit without control group
Lennart Poettering [Mon, 13 Jun 2016 16:47:42 +0000 (18:47 +0200)]
unit-name: remove spurious newline
Tom Gundersen [Mon, 13 Jun 2016 16:41:15 +0000 (18:41 +0200)]
Merge pull request #3491 from poettering/hwdb-acpi
hwdb: update UEFI/ACPI/PNP/EISA/EDID database from UEFI web site
Lennart Poettering [Mon, 13 Jun 2016 14:54:21 +0000 (16:54 +0200)]
Merge pull request #3498 from poettering/syscall-filter-fixes
Syscall filter fixes, tighter nspawn seccomp sandbox by default
Ivan Shapovalov [Mon, 13 Jun 2016 14:28:42 +0000 (18:28 +0400)]
core: parse `rd.rescue` and `rd.emergency` as initrd-specific shorthands (#3488)
Typing `rd.rescue` is easier than `rd.systemd.unit=rescue.target`.
Lennart Poettering [Mon, 13 Jun 2016 14:27:52 +0000 (16:27 +0200)]
Merge pull request #3384 from keszybz/localed-keymap
More verbose logging in localed, unit tests, and a few tweaks to keymap conversions
Lennart Poettering [Fri, 10 Jun 2016 16:04:02 +0000 (18:04 +0200)]
nspawn: lock down system call filter a bit
Let's block access to the kernel keyring and a number of obsolete system calls.
Also, update list of syscalls that may alter the system clock, and do raw IO
access. Filter ptrace() if CAP_SYS_PTRACE is not passed to the container and
acct() if CAP_SYS_PACCT is not passed.
This also changes things so that kexec(), some profiling calls, the swap calls
and quotactl() is never available to containers, not even if CAP_SYS_ADMIN is
passed. After all we currently permit CAP_SYS_ADMIN to containers by default,
but these calls should not be available, even then.
Lennart Poettering [Fri, 10 Jun 2016 16:00:12 +0000 (18:00 +0200)]
units: tighten system call filters a bit
Take away kernel keyring access, CPU emulation system calls and various debug
system calls from the various daemons we have.
Lennart Poettering [Fri, 10 Jun 2016 15:43:38 +0000 (17:43 +0200)]
core: improve seccomp syscall grouping a bit
This adds three new seccomp syscall groups: @keyring for kernel keyring access,
@cpu-emulation for CPU emulation features, for exampe vm86() for dosemu and
suchlike, and @debug for ptrace() and related calls.
Also, the @clock group is updated with more syscalls that alter the system
clock. capset() is added to @privileged, and pciconfig_iobase() is added to
@raw-io.
Finally, @obsolete is a cleaned up. A number of syscalls that never existed on
Linux and have no number assigned on any architecture are removed, as they only
exist in the man pages and other operating sytems, but not in code at all.
create_module() is moved from @module to @obsolete, as it is an obsolete system
call. mem_getpolicy() is removed from the @obsolete list, as it is not
obsolete, but simply a NUMA API.
Lennart Poettering [Fri, 10 Jun 2016 15:31:06 +0000 (17:31 +0200)]
nspawn: order caps to retain alphabetically
Lennart Poettering [Fri, 10 Jun 2016 15:30:35 +0000 (17:30 +0200)]
update TODO
Zbigniew Jędrzejewski-Szmek [Mon, 13 Jun 2016 14:24:48 +0000 (10:24 -0400)]
resolved: use single message for both dbus and signal calls (#3515)
Follow-up for #3502.
Lennart Poettering [Mon, 13 Jun 2016 14:13:41 +0000 (16:13 +0200)]
Merge pull request #3520 from keszybz/add-release.md
Add RELEASE.md
Lennart Poettering [Mon, 13 Jun 2016 14:01:44 +0000 (16:01 +0200)]
Merge pull request #3518 from keszybz/test-process-util
Enhance test-process-util to take the PID to look at
Susant Sahani [Mon, 13 Jun 2016 13:57:38 +0000 (19:27 +0530)]
networkd: fix NULL pointer (#3523)
Not every link has kind associated with it.
(gdb) r
Starting program: /home/sus/tt/systemd/systemd-networkd
Missing separate debuginfos, use: dnf debuginfo-install
glibc-2.23.1-7.fc24.x86_64
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
vboxnet0: Gained IPv6LL
wlp3s0: Gained IPv6LL
enp0s25: Gained IPv6LL
Enumeration completed
Program received signal SIGSEGV, Segmentation fault.
0x00007ffff6e27ade in __strcmp_sse2_unaligned () from /lib64/libc.so.6
(gdb) bt
src/network/networkd-link.c:2008
src/network/networkd-link.c:2059
src/network/networkd-link.c:2442
m=0x555555704a30, userdata=0x55555570bfe0) at src/network/networkd-link.c:2497
at src/libsystemd/sd-netlink/sd-netlink.c:347
src/libsystemd/sd-netlink/sd-netlink.c:402
src/libsystemd/sd-netlink/sd-netlink.c:432
userdata=0x5555556f7470) at src/libsystemd/sd-netlink/sd-netlink.c:739
src/libsystemd/sd-event/sd-event.c:2275
src/libsystemd/sd-event/sd-event.c:2626
timeout=
18446744073709551615) at src/libsystemd/sd-event/sd-event.c:2685
bus=0x5555556f9af0, name=0x555555692315 "org.freedesktop.network1",
timeout=
30000000,
check_idle=0x55555556ac84 <manager_check_idle>, userdata=0x5555556f6b20) at
src/shared/bus-util.c:134
src/network/networkd-manager.c:1128
src/network/networkd.c:127
(gdb) f 1
src/network/networkd-link.c:2008
2008 if (link->network->bridge || streq("bridge", link->kind)) {
(gdb) p link->kind
$1 = 0x0
Susant Sahani [Mon, 13 Jun 2016 13:57:17 +0000 (19:27 +0530)]
networkd: route priority replace parsing config_parse_uint32 with safe_atou32 (#3522)
Jouke Witteveen [Mon, 13 Jun 2016 10:50:12 +0000 (12:50 +0200)]
core/execute: pass env vars to PAM session setup (#3503)
Move the merger of environment variables before setting up the PAM
session and pass the aggregate environment to PAM setup. This allows
control over the PAM session hooks through environment variables.
PAM session initiation may update the environment. On successful
initiation of a PAM session, we adopt the environment of the
PAM context.
Zbigniew Jędrzejewski-Szmek [Mon, 13 Jun 2016 04:57:28 +0000 (00:57 -0400)]
systemctl: disallow systemctl --user reboot (#3519)
... as well as halt/poweroff/kexec/suspend/hibernate/hybrid-sleep.
Running those commands will fail in user mode, but we try to set the wall
message first, which might even succeed for privileged users. Best to nip
the whole sequence in the bud.
https://github.com/systemd/systemd/pull/3453#issuecomment-
225455156
Zbigniew Jędrzejewski-Szmek [Tue, 31 May 2016 17:43:41 +0000 (13:43 -0400)]
Add RELEASE.md file which lists the steps needed for release
I put it in .github, so it doesn't stand out too much; after all
it's not interesting to most people.
Zbigniew Jędrzejewski-Szmek [Tue, 31 May 2016 17:32:23 +0000 (13:32 -0400)]
CONTRIBUTING: ask people to comment after after force-push
Zbigniew Jędrzejewski-Szmek [Tue, 31 May 2016 17:27:41 +0000 (13:27 -0400)]
CONTRIBUTING: remove line wrapping
GitHub displays this file poorly, because it preserves the newlines.
Let's try how things look without any wrapping.
Zbigniew Jędrzejewski-Szmek [Mon, 13 Jun 2016 00:57:41 +0000 (20:57 -0400)]
process-util: remove broken support for pid==0
Our functions that query /proc/pid/ support using pid==0 to mean
self. get_process_id also seemed to support that, but it was not implemented
correctly: the result should be in *uid, not returned, and also it gave
completely bogus result when called from get_process_gid(). But afaict,
get_process_{uid,gid} were never called with pid==0, so it's not an actual
bug. Remove the broken code to avoid confusion.
Zbigniew Jędrzejewski-Szmek [Sun, 12 Jun 2016 23:51:11 +0000 (19:51 -0400)]
test-process-util: allow pid to be specified on the command line
This makes it easy to test the query code on "ssh localhost"
and similar.
Zbigniew Jędrzejewski-Szmek [Sun, 12 Jun 2016 23:42:51 +0000 (19:42 -0400)]
test-process-util: rework the test function to take pid as argument
This fixes a bunch of copy&paste errors in the output.
Max Prokhorov [Mon, 13 Jun 2016 01:13:42 +0000 (04:13 +0300)]
util-lib: drop trailing non-printable characters from cmdline (#3512)
If max_length is equal or greater than cmdline length all trailing non-printable
characters are dropped. If max_length is 0 it should do the same.
This should also fix cmdline truncation if the last character is not '\0'.
Fixes #3469.
Peter Hutterer [Mon, 13 Jun 2016 00:52:48 +0000 (10:52 +1000)]
hwdb: change the Logitech MX500 to 1100 dpi (#3517)
https://bugs.freedesktop.org/show_bug.cgi?id=96225
and specifically the tech specs here:
http://support.logitech.com/en_us/product/corded-mouse-m500
Zbigniew Jędrzejewski-Szmek [Sun, 12 Jun 2016 22:28:30 +0000 (18:28 -0400)]
Merge pull request #3502 from poettering/resolved-flush-cache
resolved: allow clients request cache flushes
Zbigniew Jędrzejewski-Szmek [Sun, 12 Jun 2016 19:21:22 +0000 (15:21 -0400)]
Merge pull request #3453 from poettering/fix-3353
Fixes #3353.
Tobias Jungel [Sun, 12 Jun 2016 18:01:14 +0000 (20:01 +0200)]
networkd: more vlan cleanup (#3506)
use config_parse_vlanid to parse vlan for BridgeFDB entries
Tobias Jungel [Sun, 12 Jun 2016 17:59:21 +0000 (19:59 +0200)]
networkd: cleanup of bridge vlan code (#3505)
cleanup minor nitpicks mentioned in #3428
Alex Gaynor [Sun, 12 Jun 2016 14:42:13 +0000 (10:42 -0400)]
Fixed a small typo in a comment (#3514)
Zbigniew Jędrzejewski-Szmek [Sat, 4 Jun 2016 22:15:42 +0000 (18:15 -0400)]
test-keymap-util: use kbd-model-map/language-fallback-map from $(srcdir)
This adds (undocumented) environment variables SYSTEMD_KBD_MODEL_MAP
and SYSTEMD_LANGUAGE_FALLBACK_MAP, which, if set, override compiled-in
locations of those two files.
Instead of skipping tests when the maps are not installed, just use
the one from the source dir. We still cannot do the mappings the other
way if /usr/lib/kbd/keymaps is not present, so truncate the tests in
that case.
Also tweak the debug messages a bit to make it easier to see
which function is failing.
Federico Mena Quintero [Tue, 19 May 2015 23:35:02 +0000 (18:35 -0500)]
hwdb: update UEFI/ACPI/PNP/EISA/EDID database from UEFI web site
Let's hook up the ACPI database we maintain from the upstream UEFI sources.
This adds a tool to convert the database provided upstream to our native
format, similar to how this is handled for the PCI and USB databases.
Note that the upstream web site claims to offer an XLS download, but the actual
data made available is an HTML file in reality, just one with the ".xls"
suffix...
The data provided from the UEFI folks is not very high quality nor complete,
hence apply a patch after the conversion step that fixes up a few things and
adds in more entries from various sources. For example, the EDID ids maintained
by GNOME and other sources have been added too, as they all appear to use the
same ID namespace.
This also adds explicit support for 4 character ACPI ids, in addition to the
normal 3 character PNP ids.
Also fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=90524
Lennart Poettering [Fri, 10 Jun 2016 18:54:10 +0000 (20:54 +0200)]
resolved: move verification that link is unmanaged into the proper bus calls
Previously, we checked only for the various SetLinkXYZ() calls on the Manager
object exposed on the bus if the specified interface is managed/unmanaged by
networkd (as we don't permit overriding DNS configuration via bus calls if
networkd owns the device), but the equivalent SetXYZ() calls on the Link object
did not have such a check. Fix that by moving the appropriate check into the
latter, as the former just calls that anyway.
Lennart Poettering [Fri, 10 Jun 2016 18:40:30 +0000 (20:40 +0200)]
resolved: also add a way to flush all caches via the bus
And expose it in "resolve-tool --flush-caches".
Lennart Poettering [Fri, 10 Jun 2016 18:29:32 +0000 (20:29 +0200)]
man: document what SIGUSR1 and SIGUSR2 do to resolved
Lennart Poettering [Fri, 10 Jun 2016 18:23:49 +0000 (20:23 +0200)]
resolved: flush all caches if SIGUSR2 is received
Lennart Poettering [Fri, 10 Jun 2016 21:26:24 +0000 (23:26 +0200)]
networkd: fix bad memory access for routes that are note attached to a link yet (#3499)
Corrects:
1b566071
Also see: https://github.com/systemd/systemd/pull/3478#issuecomment-
225008542
Lennart Poettering [Fri, 10 Jun 2016 18:04:53 +0000 (20:04 +0200)]
update TODO
Lennart Poettering [Mon, 6 Jun 2016 19:48:08 +0000 (21:48 +0200)]
systemctl: prolong timeout of "systemctl daemon-reload"
Reloading or reexecuting PID 1 means the unit generators are rerun, which are
timed out at 90s. Make sure the method call asking for the reload is timed out
at twice that, so that the generators have 90s and the reload operation has 90s
too.
This reworks the daemon_reload() call in systemctl, and makes it exclusively
about reloading/reexecing. Previously it was used for other trivial method
calls too, which didn't really help readability. As the code paths are now
sufficiently different, split out the old code into a new function
trivial_method().
This call also does a similar change as
c8ad4efb277c3235d58789170af11bb3c847d655 but for the reload/reexec operation.
Fixes: #3353
Lennart Poettering [Mon, 6 Jun 2016 19:45:12 +0000 (21:45 +0200)]
systemctl: don't suppress error code when handling legacy commands
For legacy commands such as /sbin/halt or /sbin/poweroff we support legacy
fallbacks that talk via traditional SysV way with PID 1 to issue the desired
operation. We do this on any kind of error if the primary method of operation
fails. When this is the case we suppress any error message that is normally
generated, in order to not confuse the user. When suppressing this log message,
don't suppress the original error code, because there's really no reason to.