x86/ftrace: Remove ftrace_epilogue()

Remove the weird jumps to RET and simply use RET.

This then promotes ftrace_stub() to a real function; which becomes
important for kcfi.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220915111148.719080593@infradead.org
Signed-off-by: Peter Zijlstra <peterz@infradead.org>

drm/amdgpu: fix sdma doorbell init ordering on APUs

Commit 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
uncovered a bug in amdgpu that required a reordering of the driver
init sequence to avoid accessing a special register on the GPU
before it was properly set up leading to an PCI AER error.  This
reordering uncovered a different hw programming ordering dependency
in some APUs where the SDMA doorbells need to be programmed before
the GFX doorbells. To fix this, move the SDMA doorbell programming
back into the soc15 common code, but use the actual doorbell range
values directly rather than the values stored in the ring structure
since those will not be initialized at this point.

This is a partial revert, but with the doorbell assignment
fixed so the proper doorbell index is set before it's used.

Fixes: e3163bc8ffdfdb ("drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: skhan@linuxfoundation.org
Cc: stable@vger.kernel.org

blktrace: remove unnessary stop block trace in 'blk_trace_shutdown'

As previous commit, 'blk_trace_cleanup' will stop block trace if
block trace's state is 'Blktrace_running'.
So remove unnessary stop block trace in 'blk_trace_shutdown'.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221019033602.752383-4-yebin@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blktrace: fix possible memleak in '__blk_trace_remove'

When test as follows:
step1: ioctl(sda, BLKTRACESETUP, &arg)
step2: ioctl(sda, BLKTRACESTART, NULL)
step3: ioctl(sda, BLKTRACETEARDOWN, NULL)
step4: ioctl(sda, BLKTRACESETUP, &arg)
Got issue as follows:
debugfs: File 'dropped' in directory 'sda' already present!
debugfs: File 'msg' in directory 'sda' already present!
debugfs: File 'trace0' in directory 'sda' already present!

And also find syzkaller report issue like "KASAN: use-after-free Read in relay_switch_subbuf"
"https://syzkaller.appspot.com/bug?id=13849f0d9b1b818b087341691be6cc3ac6a6bfb7"

If remove block trace without stop(BLKTRACESTOP) block trace, '__blk_trace_remove'
will just set 'q->blk_trace' with NULL. However, debugfs file isn't removed, so
will report file already present when call BLKTRACESETUP.
static int __blk_trace_remove(struct request_queue *q)
{
        struct blk_trace *bt;

        bt = rcu_replace_pointer(q->blk_trace, NULL,
                                 lockdep_is_held(&q->debugfs_mutex));
        if (!bt)
                return -EINVAL;

if (bt->trace_state != Blktrace_running)
         blk_trace_cleanup(q, bt);

        return 0;
}

If do test as follows:
step1: ioctl(sda, BLKTRACESETUP, &arg)
step2: ioctl(sda, BLKTRACESTART, NULL)
step3: ioctl(sda, BLKTRACETEARDOWN, NULL)
step4: remove sda

There will remove debugfs directory which will remove recursively all file
under directory.
>> blk_release_queue
>> debugfs_remove_recursive(q->debugfs_dir)
So all files which created in 'do_blk_trace_setup' are removed, and
'dentry->d_inode' is NULL. But 'q->blk_trace' is still in 'running_trace_lock',
'trace_note_tsk' will traverse 'running_trace_lock' all nodes.
>>trace_note_tsk
>>  trace_note
>>    relay_reserve
>>       relay_switch_subbuf
>>        d_inode(buf->dentry)->i_size

To solve above issues, reference commit '5afedf670caf', call 'blk_trace_cleanup'
unconditionally in '__blk_trace_remove' and first stop block trace in
'blk_trace_cleanup'.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221019033602.752383-3-yebin@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blktrace: introduce 'blk_trace_{start,stop}' helper

Introduce 'blk_trace_{start,stop}' helper. No functional changed.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221019033602.752383-2-yebin@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

bio: safeguard REQ_ALLOC_CACHE bio put

bio_put() with REQ_ALLOC_CACHE assumes that it's executed not from
an irq context. Let's add a warning if the invariant is not respected,
especially since there is a couple of places removing REQ_POLLED by hand
without also clearing REQ_ALLOC_CACHE.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/558d78313476c4e9c233902efa0092644c3d420a.1666122465.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io-wq: Fix memory leak in worker creation

If the CPU mask allocation for a node fails, then the memory allocated for
the 'io_wqe' struct of the current node doesn't get freed on the error
handling path, since it has not yet been added to the 'wqes' array.

This was spotted when fuzzing v6.1-rc1 with Syzkaller:
BUG: memory leak
unreferenced object 0xffff8880093d5000 (size 1024):
  comm "syz-executor.2", pid 7701, jiffies 4295048595 (age 13.900s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000cb463369>] __kmem_cache_alloc_node+0x18e/0x720
    [<00000000147a3f9c>] kmalloc_node_trace+0x2a/0x130
    [<000000004e107011>] io_wq_create+0x7b9/0xdc0
    [<00000000c38b2018>] io_uring_alloc_task_context+0x31e/0x59d
    [<00000000867399da>] __io_uring_add_tctx_node.cold+0x19/0x1ba
    [<000000007e0e7a79>] io_uring_setup.cold+0x1b80/0x1dce
    [<00000000b545e9f6>] __x64_sys_io_uring_setup+0x5d/0x80
    [<000000008a8a7508>] do_syscall_64+0x5d/0x90
    [<000000004ac08bec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: 0e03496d1967 ("io-wq: use private CPU mask")
Cc: stable@vger.kernel.org
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Link: https://lore.kernel.org/r/20221020014710.902201-1-rafaelmendsr@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block, bfq: remove unused variable for bfq_queue

it defined in d0edc2473be9d, but there's nowhere to use it,
so remove it.

Signed-off-by: Yuwei Guan <Yuwei.Guan@zeekrlife.com>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20221018030139.159-1-Yuwei.Guan@zeekrlife.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: only clone bio if we have a backing device

Commit c347a787e34cb (drbd: set ->bi_bdev in drbd_req_new) moved a
bio_set_dev call (which has since been removed) to "earlier", from
drbd_request_prepare to drbd_req_new.

The problem is that this accesses device->ldev->backing_bdev, which is
not NULL-checked at this point. When we don't have an ldev (i.e. when
the DRBD device is diskless), this leads to a null pointer deref.

So, only allocate the private_bio if we actually have a disk. This is
also a small optimization, since we don't clone the bio to only to
immediately free it again in the diskless case.

Fixes: c347a787e34cb ("drbd: set ->bi_bdev in drbd_req_new")
Co-developed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Co-developed-by: Joel Colledge <joel.colledge@linbit.com>
Signed-off-by: Joel Colledge <joel.colledge@linbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221020085205.129090-1-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'nvme-6.1-2022-10-22' of git://git.infradead.org/nvme into block-6.1

Pull NVMe fixes from Christoph:

"nvme fixes for Linux 6.1

 - fix nvme-hwmon for DMA non-cohehrent architectures (Serge Semin)
 - add a nvme-hwmong maintainer (Christoph Hellwig)
 - fix error pointer dereference in error handling (Dan Carpenter)
 - fix invalid memory reference in nvmet_subsys_attr_qid_max_show
   (Daniel Wagner)
 - don't limit the DMA segment size in nvme-apple (Russell King)
 - fix workqueue MEM_RECLAIM flushing dependency (Sagi Grimberg)
 - disable write zeroes on various Kingston SSDs (Xander Li)"

* tag 'nvme-6.1-2022-10-22' of git://git.infradead.org/nvme:
  nvmet: fix invalid memory reference in nvmet_subsys_attr_qid_max_show
  nvmet: fix workqueue MEM_RECLAIM flushing dependency
  nvme-hwmon: kmalloc the NVME SMART log buffer
  nvme-hwmon: consistently ignore errors from nvme_hwmon_init
  nvme: add Guenther as nvme-hwmon maintainer
  nvme-apple: don't limit DMA segement size
  nvme-pci: disable write zeroes on various Kingston SSD
  nvme: fix error pointer dereference in error handling

drm/panfrost: replace endian-specific types with native ones

__le32 and __le64 types aren't portable and are not available on
FreeBSD (which uses the same uAPI).

Instead of attempting to always output little endian, just use native
endianness in the dumps. Tools can detect the endianness in use by
looking at the 'magic' field, but equally we don't expect big-endian to
be used with Mali (there are no known implementations out there).

Bug: https://gitlab.freedesktop.org/mesa/mesa/-/issues/7252
Fixes: 730c2bf4ad39 ("drm/panfrost: Add support for devcoredump")
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221017104602.142992-3-steven.price@arm.com

drm/panfrost: Remove type name from internal structs

The two structs internal to struct panfrost_dump_object_header were
named, but sadly that is incompatible with C++, causing an error: "an
anonymous union may only have public non-static data members".

However nothing refers to struct pan_reg_hdr and struct pan_bomap_hdr
and there's no need to export these definitions, so lets drop them. This
fixes the C++ build error with the minimum change in userspace API.

Reported-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Fixes: 730c2bf4ad39 ("drm/panfrost: Add support for devcoredump")
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221017104602.142992-2-steven.price@arm.com

drm/connector: Set DDC pointer in drmm_connector_init

Commit 35a3b82f1bdd ("drm/connector: Introduce drmm_connector_init")
introduced the function drmm_connector_init() with a parameter for an
optional ddc pointer to the i2c controller used to access the DDC bus.

However, the underlying call to __drm_connector_init() was always
setting it to NULL instead of passing the ddc argument around.

This resulted in unexpected null pointer dereference on platforms
expecting to get a DDC controller.

Fixes: 35a3b82f1bdd ("drm/connector: Introduce drmm_connector_init")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20221019143442.1798964-1-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm: tests: Fix a buffer overflow in format_helper_test

The xrgb2101010 format conversion test (unlike for other formats) does
an endianness conversion on the results. However, it always converts
TEST_BUF_SIZE 32-bit integers, which results in reading from (and
writing to) more memory than in present in the result buffer. Instead,
use the buffer size, divided by sizeof(u32).

The issue could be reproduced with KASAN:
./tools/testing/kunit/kunit.py run --kunitconfig drivers/gpu/drm/tests \
--kconfig_add CONFIG_KASAN=y --kconfig_add CONFIG_KASAN_VMALLOC=y \
--kconfig_add CONFIG_KASAN_KUNIT_TEST=y \
drm_format_helper_test.*xrgb2101010

Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Fixes: 453114319699 ("drm/format-helper: Add KUnit tests for drm_fb_xrgb8888_to_xrgb2101010()")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019073239.3779180-1-davidgow@google.com

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get v6.1-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

net: phy: dp83822: disable MDI crossover status change interrupt

If the cable is disconnected the PHY seems to toggle between MDI and
MDI-X modes. With the MDI crossover status interrupt active this causes
roughly 10 interrupts per second.

As the crossover status isn't checked by the driver, the interrupt can
be disabled to reduce the interrupt load.

Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission")
Signed-off-by: Felix Riemann <felix.riemann@sma.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221018104755.30025-1-svc.sw.rte.linux@sma.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ublk_drv: use flexible-array member instead of zero-length array

Eliminate the following coccicheck warning:
./drivers/block/ublk_drv.c:127:16-19: WARNING use flexible-array member instead

Signed-off-by: Yushan Zhou <katrinzhou@tencent.com>
Link: https://lore.kernel.org/r/20221018100132.355393-1-zys.zljxml@gmail.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

net: sched: fix race condition in qdisc_graft()

We had one syzbot report [1] in syzbot queue for a while.
I was waiting for more occurrences and/or a repro but
Dmitry Vyukov spotted the issue right away.

<quoting Dmitry>
qdisc_graft() drops reference to qdisc in notify_and_destroy
while it's still assigned to dev->qdisc
</quoting>

Indeed, RCU rules are clear when replacing a data structure.
The visible pointer (dev->qdisc in this case) must be updated
to the new object _before_ RCU grace period is started
(qdisc_put(old) in this case).

[1]
BUG: KASAN: use-after-free in __tcf_qdisc_find.part.0+0xa3a/0xac0 net/sched/cls_api.c:1066
Read of size 4 at addr ffff88802065e038 by task syz-executor.4/21027

CPU: 0 PID: 21027 Comm: syz-executor.4 Not tainted 6.0.0-rc3-syzkaller-00363-g7726d4c3e60b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:317 [inline]
print_report.cold+0x2ba/0x719 mm/kasan/report.c:433
kasan_report+0xb1/0x1e0 mm/kasan/report.c:495
__tcf_qdisc_find.part.0+0xa3a/0xac0 net/sched/cls_api.c:1066
__tcf_qdisc_find net/sched/cls_api.c:1051 [inline]
tc_new_tfilter+0x34f/0x2200 net/sched/cls_api.c:2018
rtnetlink_rcv_msg+0x955/0xca0 net/core/rtnetlink.c:6081
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
____sys_sendmsg+0x6eb/0x810 net/socket.c:2482
___sys_sendmsg+0x110/0x1b0 net/socket.c:2536
__sys_sendmsg+0xf3/0x1c0 net/socket.c:2565
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f5efaa89279
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f5efbc31168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f5efab9bf80 RCX: 00007f5efaa89279
RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000005
RBP: 00007f5efaae32e9 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f5efb0cfb1f R14: 00007f5efbc31300 R15: 0000000000022000
</TASK>

Allocated by task 21027:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
kasan_set_track mm/kasan/common.c:45 [inline]
set_alloc_info mm/kasan/common.c:437 [inline]
____kasan_kmalloc mm/kasan/common.c:516 [inline]
____kasan_kmalloc mm/kasan/common.c:475 [inline]
__kasan_kmalloc+0xa9/0xd0 mm/kasan/common.c:525
kmalloc_node include/linux/slab.h:623 [inline]
kzalloc_node include/linux/slab.h:744 [inline]
qdisc_alloc+0xb0/0xc50 net/sched/sch_generic.c:938
qdisc_create_dflt+0x71/0x4a0 net/sched/sch_generic.c:997
attach_one_default_qdisc net/sched/sch_generic.c:1152 [inline]
netdev_for_each_tx_queue include/linux/netdevice.h:2437 [inline]
attach_default_qdiscs net/sched/sch_generic.c:1170 [inline]
dev_activate+0x760/0xcd0 net/sched/sch_generic.c:1229
__dev_open+0x393/0x4d0 net/core/dev.c:1441
__dev_change_flags+0x583/0x750 net/core/dev.c:8556
rtnl_configure_link+0xee/0x240 net/core/rtnetlink.c:3189
rtnl_newlink_create net/core/rtnetlink.c:3371 [inline]
__rtnl_newlink+0x10b8/0x17e0 net/core/rtnetlink.c:3580
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3593
rtnetlink_rcv_msg+0x43a/0xca0 net/core/rtnetlink.c:6090
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
____sys_sendmsg+0x6eb/0x810 net/socket.c:2482
___sys_sendmsg+0x110/0x1b0 net/socket.c:2536
__sys_sendmsg+0xf3/0x1c0 net/socket.c:2565
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Freed by task 21020:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
kasan_set_track+0x21/0x30 mm/kasan/common.c:45
kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370
____kasan_slab_free mm/kasan/common.c:367 [inline]
____kasan_slab_free+0x166/0x1c0 mm/kasan/common.c:329
kasan_slab_free include/linux/kasan.h:200 [inline]
slab_free_hook mm/slub.c:1754 [inline]
slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1780
slab_free mm/slub.c:3534 [inline]
kfree+0xe2/0x580 mm/slub.c:4562
rcu_do_batch kernel/rcu/tree.c:2245 [inline]
rcu_core+0x7b5/0x1890 kernel/rcu/tree.c:2505
__do_softirq+0x1d3/0x9c6 kernel/softirq.c:571

Last potentially related work creation:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
__kasan_record_aux_stack+0xbe/0xd0 mm/kasan/generic.c:348
call_rcu+0x99/0x790 kernel/rcu/tree.c:2793
qdisc_put+0xcd/0xe0 net/sched/sch_generic.c:1083
notify_and_destroy net/sched/sch_api.c:1012 [inline]
qdisc_graft+0xeb1/0x1270 net/sched/sch_api.c:1084
tc_modify_qdisc+0xbb7/0x1a00 net/sched/sch_api.c:1671
rtnetlink_rcv_msg+0x43a/0xca0 net/core/rtnetlink.c:6090
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
____sys_sendmsg+0x6eb/0x810 net/socket.c:2482
___sys_sendmsg+0x110/0x1b0 net/socket.c:2536
__sys_sendmsg+0xf3/0x1c0 net/socket.c:2565
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Second to last potentially related work creation:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
__kasan_record_aux_stack+0xbe/0xd0 mm/kasan/generic.c:348
kvfree_call_rcu+0x74/0x940 kernel/rcu/tree.c:3322
neigh_destroy+0x431/0x630 net/core/neighbour.c:912
neigh_release include/net/neighbour.h:454 [inline]
neigh_cleanup_and_release+0x1f8/0x330 net/core/neighbour.c:103
neigh_del net/core/neighbour.c:225 [inline]
neigh_remove_one+0x37d/0x460 net/core/neighbour.c:246
neigh_forced_gc net/core/neighbour.c:276 [inline]
neigh_alloc net/core/neighbour.c:447 [inline]
___neigh_create+0x18b5/0x29a0 net/core/neighbour.c:642
ip6_finish_output2+0xfb8/0x1520 net/ipv6/ip6_output.c:125
__ip6_finish_output net/ipv6/ip6_output.c:195 [inline]
ip6_finish_output+0x690/0x1160 net/ipv6/ip6_output.c:206
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip6_output+0x1ed/0x540 net/ipv6/ip6_output.c:227
dst_output include/net/dst.h:451 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
NF_HOOK include/linux/netfilter.h:301 [inline]
mld_sendpack+0xa09/0xe70 net/ipv6/mcast.c:1820
mld_send_cr net/ipv6/mcast.c:2121 [inline]
mld_ifc_work+0x71c/0xdc0 net/ipv6/mcast.c:2653
process_one_work+0x991/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e4/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306

The buggy address belongs to the object at ffff88802065e000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 56 bytes inside of
1024-byte region [ffff88802065e000, ffff88802065e400)

The buggy address belongs to the physical page:
page:ffffea0000819600 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x20658
head:ffffea0000819600 order:3 compound_mapcount:0 compound_pincount:0
flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000010200 0000000000000000 dead000000000001 ffff888011841dc0
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 3523, tgid 3523 (sshd), ts 41495190986, free_ts 41417713212
prep_new_page mm/page_alloc.c:2532 [inline]
get_page_from_freelist+0x109b/0x2ce0 mm/page_alloc.c:4283
__alloc_pages+0x1c7/0x510 mm/page_alloc.c:5515
alloc_pages+0x1a6/0x270 mm/mempolicy.c:2270
alloc_slab_page mm/slub.c:1824 [inline]
allocate_slab+0x27e/0x3d0 mm/slub.c:1969
new_slab mm/slub.c:2029 [inline]
___slab_alloc+0x7f1/0xe10 mm/slub.c:3031
__slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3118
slab_alloc_node mm/slub.c:3209 [inline]
__kmalloc_node_track_caller+0x2f2/0x380 mm/slub.c:4955
kmalloc_reserve net/core/skbuff.c:358 [inline]
__alloc_skb+0xd9/0x2f0 net/core/skbuff.c:430
alloc_skb_fclone include/linux/skbuff.h:1307 [inline]
tcp_stream_alloc_skb+0x38/0x580 net/ipv4/tcp.c:861
tcp_sendmsg_locked+0xc36/0x2f80 net/ipv4/tcp.c:1325
tcp_sendmsg+0x2b/0x40 net/ipv4/tcp.c:1483
inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
sock_write_iter+0x291/0x3d0 net/socket.c:1108
call_write_iter include/linux/fs.h:2187 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x9e9/0xdd0 fs/read_write.c:578
ksys_write+0x1e8/0x250 fs/read_write.c:631
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1449 [inline]
free_pcp_prepare+0x5e4/0xd20 mm/page_alloc.c:1499
free_unref_page_prepare mm/page_alloc.c:3380 [inline]
free_unref_page+0x19/0x4d0 mm/page_alloc.c:3476
__unfreeze_partials+0x17c/0x1a0 mm/slub.c:2548
qlink_free mm/kasan/quarantine.c:168 [inline]
qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:187
kasan_quarantine_reduce+0x180/0x200 mm/kasan/quarantine.c:294
__kasan_slab_alloc+0xa2/0xc0 mm/kasan/common.c:447
kasan_slab_alloc include/linux/kasan.h:224 [inline]
slab_post_alloc_hook mm/slab.h:727 [inline]
slab_alloc_node mm/slub.c:3243 [inline]
slab_alloc mm/slub.c:3251 [inline]
__kmem_cache_alloc_lru mm/slub.c:3258 [inline]
kmem_cache_alloc+0x267/0x3b0 mm/slub.c:3268
kmem_cache_zalloc include/linux/slab.h:723 [inline]
alloc_buffer_head+0x20/0x140 fs/buffer.c:2974
alloc_page_buffers+0x280/0x790 fs/buffer.c:829
create_empty_buffers+0x2c/0xee0 fs/buffer.c:1558
ext4_block_write_begin+0x1004/0x1530 fs/ext4/inode.c:1074
ext4_da_write_begin+0x422/0xae0 fs/ext4/inode.c:2996
generic_perform_write+0x246/0x560 mm/filemap.c:3738
ext4_buffered_write_iter+0x15b/0x460 fs/ext4/file.c:270
ext4_file_write_iter+0x44a/0x1660 fs/ext4/file.c:679
call_write_iter include/linux/fs.h:2187 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x9e9/0xdd0 fs/read_write.c:578

Fixes: af356afa010f ("net_sched: reintroduce dev->qdisc for use by sch_api")
Reported-by: syzbot <syzkaller@googlegroups.com>
Diagnosed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221018203258.2793282-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: hns: fix possible memory leak in hnae_ae_register()

Inject fault while probing module, if device_register() fails,
but the refcount of kobject is not decreased to 0, the name
allocated in dev_set_name() is leaked. Fix this by calling
put_device(), so that name can be freed in callback function
kobject_cleanup().

unreferenced object 0xffff00c01aba2100 (size 128):
  comm "systemd-udevd", pid 1259, jiffies 4294903284 (age 294.152s)
  hex dump (first 32 bytes):
    68 6e 61 65 30 00 00 00 18 21 ba 1a c0 00 ff ff  hnae0....!......
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<0000000034783f26>] slab_post_alloc_hook+0xa0/0x3e0
    [<00000000748188f2>] __kmem_cache_alloc_node+0x164/0x2b0
    [<00000000ab0743e8>] __kmalloc_node_track_caller+0x6c/0x390
    [<000000006c0ffb13>] kvasprintf+0x8c/0x118
    [<00000000fa27bfe1>] kvasprintf_const+0x60/0xc8
    [<0000000083e10ed7>] kobject_set_name_vargs+0x3c/0xc0
    [<000000000b87affc>] dev_set_name+0x7c/0xa0
    [<000000003fd8fe26>] hnae_ae_register+0xcc/0x190 [hnae]
    [<00000000fe97edc9>] hns_dsaf_ae_init+0x9c/0x108 [hns_dsaf]
    [<00000000c36ff1eb>] hns_dsaf_probe+0x548/0x748 [hns_dsaf]

Fixes: 6fe6611ff275 ("net: add Hisilicon Network Subsystem hnae framework support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221018122451.1749171-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

wwan_hwsim: fix possible memory leak in wwan_hwsim_dev_new()

Inject fault while probing module, if device_register() fails,
but the refcount of kobject is not decreased to 0, the name
allocated in dev_set_name() is leaked. Fix this by calling
put_device(), so that name can be freed in callback function
kobject_cleanup().

unreferenced object 0xffff88810152ad20 (size 8):
  comm "modprobe", pid 252, jiffies 4294849206 (age 22.713s)
  hex dump (first 8 bytes):
    68 77 73 69 6d 30 00 ff                          hwsim0..
  backtrace:
    [<000000009c3504ed>] __kmalloc_node_track_caller+0x44/0x1b0
    [<00000000c0228a5e>] kvasprintf+0xb5/0x140
    [<00000000cff8c21f>] kvasprintf_const+0x55/0x180
    [<0000000055a1e073>] kobject_set_name_vargs+0x56/0x150
    [<000000000a80b139>] dev_set_name+0xab/0xe0

Fixes: f36a111a74e7 ("wwan_hwsim: WWAN device simulator")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://lore.kernel.org/r/20221018131607.1901641-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sfc: include vport_id in filter spec hash and equal()

Filters on different vports are qualified by different implicit MACs and/or
VLANs, so shouldn't be considered equal even if their other match fields
are identical.

Fixes: 7c460d9be610 ("sfc: Extend and abstract efx_filter_spec to cover Huntington/EF10")
Co-developed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20221018092841.32206-1-pieter.jansen-van-vuuren@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

cifs: update internal module number

To 2.40

Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: fix memory leaks in session setup

We were only zeroing out the ntlmssp blob but forgot to free the
allocated buffer in the end of SMB2_sess_auth_rawntlmssp_negotiate()
and SMB2_sess_auth_rawntlmssp_authenticate() functions.

This fixes below kmemleak reports:

unreferenced object 0xffff88800ddcfc60 (size 96):
  comm "mount.cifs", pid 758, jiffies 4294696066 (age 42.967s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000d0beeb29>] __kmalloc+0x39/0xa0
    [<00000000e3834047>] build_ntlmssp_smb3_negotiate_blob+0x2c/0x110 [cifs]
    [<00000000e85f5ab2>] SMB2_sess_auth_rawntlmssp_negotiate+0xd3/0x230 [cifs]
    [<0000000080fdb897>] SMB2_sess_setup+0x16c/0x2a0 [cifs]
    [<000000009af320a8>] cifs_setup_session+0x13b/0x370 [cifs]
    [<00000000f15d5982>] cifs_get_smb_ses+0x643/0xb90 [cifs]
    [<00000000fe15eb90>] mount_get_conns+0x63/0x3e0 [cifs]
    [<00000000768aba03>] mount_get_dfs_conns+0x16/0xa0 [cifs]
    [<00000000cf1cf146>] cifs_mount+0x1c2/0x9a0 [cifs]
    [<000000000d66b51e>] cifs_smb3_do_mount+0x10e/0x710 [cifs]
    [<0000000077a996c5>] smb3_get_tree+0xf4/0x200 [cifs]
    [<0000000094dbd041>] vfs_get_tree+0x23/0xc0
    [<000000003a8561de>] path_mount+0x2d3/0xb50
    [<00000000ed5c86d6>] __x64_sys_mount+0x102/0x140
    [<00000000142142f3>] do_syscall_64+0x3b/0x90
    [<00000000e2b89731>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
unreferenced object 0xffff88801437f000 (size 512):
  comm "mount.cifs", pid 758, jiffies 4294696067 (age 42.970s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000d0beeb29>] __kmalloc+0x39/0xa0
    [<00000000004f53d2>] build_ntlmssp_auth_blob+0x4f/0x340 [cifs]
    [<000000005f333084>] SMB2_sess_auth_rawntlmssp_authenticate+0xd4/0x250 [cifs]
    [<0000000080fdb897>] SMB2_sess_setup+0x16c/0x2a0 [cifs]
    [<000000009af320a8>] cifs_setup_session+0x13b/0x370 [cifs]
    [<00000000f15d5982>] cifs_get_smb_ses+0x643/0xb90 [cifs]
    [<00000000fe15eb90>] mount_get_conns+0x63/0x3e0 [cifs]
    [<00000000768aba03>] mount_get_dfs_conns+0x16/0xa0 [cifs]
    [<00000000cf1cf146>] cifs_mount+0x1c2/0x9a0 [cifs]
    [<000000000d66b51e>] cifs_smb3_do_mount+0x10e/0x710 [cifs]
    [<0000000077a996c5>] smb3_get_tree+0xf4/0x200 [cifs]
    [<0000000094dbd041>] vfs_get_tree+0x23/0xc0
    [<000000003a8561de>] path_mount+0x2d3/0xb50
    [<00000000ed5c86d6>] __x64_sys_mount+0x102/0x140
    [<00000000142142f3>] do_syscall_64+0x3b/0x90
    [<00000000e2b89731>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: a4e430c8c8ba ("cifs: replace kfree() with kfree_sensitive() for sensitive data")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: drop the lease for cached directories on rmdir or rename

When we delete or rename a directory we must also drop any cached lease we have
on the directory.

Fixes: a350d6e73f5e ("cifs: enable caching of directories for which a lease is held")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Merge git://git./linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Missing flowi uid field in nft_fib expression, from Guillaume Nault.
   This is broken since the creation of the fib expression.

2) Relax sanity check to fix bogus EINVAL error when deleting elements
   belonging set intervals. Broken since 6.0-rc.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: relax NFTA_SET_ELEM_KEY_END set flags requirements
  netfilter: rpfilter/fib: Set ->flowic_uid correctly for user namespaces.
====================

Link: https://lore.kernel.org/r/20221019065225.1006344-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MAINTAINERS: Update Kishon's email address in PCI endpoint subsystem

Update Kishon's email address in PCI endpoint subsystem maintainer
entry and mark him as reviewer.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

genetlink: fix kdoc warnings

Address a bunch of kdoc warnings:

include/net/genetlink.h:81: warning: Function parameter or member 'module' not described in 'genl_family'
include/net/genetlink.h:243: warning: expecting prototype for struct genl_info. Prototype was for struct genl_dumpit_info instead
include/net/genetlink.h:419: warning: Function parameter or member 'net' not described in 'genlmsg_unicast'
include/net/genetlink.h:438: warning: expecting prototype for gennlmsg_data(). Prototype was for genlmsg_data() instead
include/net/genetlink.h:244: warning: Function parameter or member 'op' not described in 'genl_dumpit_info'

Link: https://lore.kernel.org/r/20221018231310.1040482-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

i2c: qcom-cci: Fix ordering of pm_runtime_xx and i2c_add_adapter

When we compile-in the CCI along with the imx412 driver and run on the RB5
we see that i2c_add_adapter() causes the probe of the imx412 driver to
happen.

This probe tries to perform an i2c xfer() and the xfer() in i2c-qcom-cci.c
fails on pm_runtime_get() because the i2c-qcom-cci.c::probe() function has
not completed to pm_runtime_enable(dev).

Fix this sequence by ensuring pm_runtime_xxx() calls happen prior to adding
the i2c adapter.

Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver")
Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

io_uring/msg_ring: Fix NULL pointer dereference in io_msg_send_fd()

Syzkaller produced the below call trace:

 BUG: KASAN: null-ptr-deref in io_msg_ring+0x3cb/0x9f0
 Write of size 8 at addr 0000000000000070 by task repro/16399

 CPU: 0 PID: 16399 Comm: repro Not tainted 6.1.0-rc1 #28
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7
 Call Trace:
  <TASK>
  dump_stack_lvl+0xcd/0x134
  ? io_msg_ring+0x3cb/0x9f0
  kasan_report+0xbc/0xf0
  ? io_msg_ring+0x3cb/0x9f0
  kasan_check_range+0x140/0x190
  io_msg_ring+0x3cb/0x9f0
  ? io_msg_ring_prep+0x300/0x300
  io_issue_sqe+0x698/0xca0
  io_submit_sqes+0x92f/0x1c30
  __do_sys_io_uring_enter+0xae4/0x24b0
....
 RIP: 0033:0x7f2eaf8f8289
 RSP: 002b:00007fff40939718 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa
 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f2eaf8f8289
 RDX: 0000000000000000 RSI: 0000000000006f71 RDI: 0000000000000004
 RBP: 00007fff409397a0 R08: 0000000000000000 R09: 0000000000000039
 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004006d0
 R13: 00007fff40939880 R14: 0000000000000000 R15: 0000000000000000
  </TASK>
 Kernel panic - not syncing: panic_on_warn set ...

We don't have a NULL check on file_ptr in io_msg_send_fd() function,
so when file_ptr is NUL src_file is also NULL and get_file()
dereferences a NULL pointer and leads to above crash.

Add a NULL check to fix this issue.

Fixes: e6130eba8a84 ("io_uring: add support for passing fixed file descriptors")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20221019171218.1337614-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

i2c: xiic: Add platform module alias

The missing "platform" alias is required for the mgb4 v4l2 driver to load
the i2c controller driver when probing the HW.

Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

ACPI: scan: Fix DMA range assignment

Assigning the device's dma_range_map from the iterator variable after
the loop means it always points to the empty terminator at the end of
the map, which is not what we want. Similarly, freeing the iterator on
error when it points to somwhere in the middle of the allocated array
won't work either. Fix this.

Fixes: bf2ee8d0c385 ("ACPI: scan: Support multiple DMA windows with different offsets")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Jianmin Lv <lvjianmin@loongson.cn>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

MAINTAINERS: Add Vignesh Raghavendra as maintainer of TI DRA7XX/J721E PCI driver

Add Vignesh Raghavendra as maintainer of TI DRA7XX/J721E PCI driver.

Link: https://lore.kernel.org/r/20220928093105.23073-1-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

smb3: interface count displayed incorrectly

The "Server interfaces" count in /proc/fs/cifs/DebugData increases
as the interfaces are requeried, rather than being reset to the new
value.  This could cause a problem if the server disabled
multichannel as the iface_count is checked in try_adding_channels
to see if multichannel still supported.

Also fixes a coverity warning:

Addresses-Coverity: 1526374 ("Concurrent data access violations  (MISSING_LOCK)")
Cc: <stable@vger.kernel.org>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

selinux: enable use of both GFP_KERNEL and GFP_ATOMIC in convert_context()

The following warning was triggered on a hardware environment:

  SELinux: Converting 162 SID table entries...
  BUG: sleeping function called from invalid context at
       __might_sleep+0x60/0x74 0x0
  in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 5943, name: tar
  CPU: 7 PID: 5943 Comm: tar Tainted: P O 5.10.0 #1
  Call trace:
   dump_backtrace+0x0/0x1c8
   show_stack+0x18/0x28
   dump_stack+0xe8/0x15c
   ___might_sleep+0x168/0x17c
   __might_sleep+0x60/0x74
   __kmalloc_track_caller+0xa0/0x7dc
   kstrdup+0x54/0xac
   convert_context+0x48/0x2e4
   sidtab_context_to_sid+0x1c4/0x36c
   security_context_to_sid_core+0x168/0x238
   security_context_to_sid_default+0x14/0x24
   inode_doinit_use_xattr+0x164/0x1e4
   inode_doinit_with_dentry+0x1c0/0x488
   selinux_d_instantiate+0x20/0x34
   security_d_instantiate+0x70/0xbc
   d_splice_alias+0x4c/0x3c0
   ext4_lookup+0x1d8/0x200 [ext4]
   __lookup_slow+0x12c/0x1e4
   walk_component+0x100/0x200
   path_lookupat+0x88/0x118
   filename_lookup+0x98/0x130
   user_path_at_empty+0x48/0x60
   vfs_statx+0x84/0x140
   vfs_fstatat+0x20/0x30
   __se_sys_newfstatat+0x30/0x74
   __arm64_sys_newfstatat+0x1c/0x2c
   el0_svc_common.constprop.0+0x100/0x184
   do_el0_svc+0x1c/0x2c
   el0_svc+0x20/0x34
   el0_sync_handler+0x80/0x17c
   el0_sync+0x13c/0x140
  SELinux: Context system_u:object_r:pssp_rsyslog_log_t:s0:c0 is
           not valid (left unmapped).

It was found that within a critical section of spin_lock_irqsave in
sidtab_context_to_sid(), convert_context() (hooked by
sidtab_convert_params.func) might cause the process to sleep via
allocating memory with GFP_KERNEL, which is problematic.

As Ondrej pointed out [1], convert_context()/sidtab_convert_params.func
has another caller sidtab_convert_tree(), which is okay with GFP_KERNEL.
Therefore, fix this problem by adding a gfp_t argument for
convert_context()/sidtab_convert_params.func and pass GFP_KERNEL/_ATOMIC
properly in individual callers.

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20221018120111.1474581-1-gongruiqi1@huawei.com/
Reported-by: Tan Ninghao <tanninghao1@huawei.com>
Fixes: ee1a84fdfeed ("selinux: overhaul sidtab to fix bug and improve performance")
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
[PM: wrap long BUG() output lines, tweak subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>

Merge branch 'qdisc-ingress-success'

Paul Blakey says:

====================
net: Fix return value of qdisc ingress handling on success

Fix patch + self-test with the currently broken scenario.

v4->v3:
  Removed new line in self test and rebase (Paolo).

v2->v3:
  Added DROP return to TC_ACT_SHOT case (Cong).

v1->v2:
  Changed blamed commit
  Added self-test
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: add selftest for chaining of tc ingress handling to egress

This test runs a simple ingress tc setup between two veth pairs,
then adds a egress->ingress rule to test the chaining of tc ingress
pipeline to tc egress piepline.

Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: Fix return value of qdisc ingress handling on success

Currently qdisc ingress handling (sch_handle_ingress()) doesn't
set a return value and it is left to the old return value of
the caller (__netif_receive_skb_core()) which is RX drop, so if
the packet is consumed, caller will stop and return this value
as if the packet was dropped.

This causes a problem in the kernel tcp stack when having a
egress tc rule forwarding to a ingress tc rule.
The tcp stack sending packets on the device having the egress rule
will see the packets as not successfully transmitted (although they
actually were), will not advance it's internal state of sent data,
and packets returning on such tcp stream will be dropped by the tcp
stack with reason ack-of-unsent-data. See reproduction in [0] below.

Fix that by setting the return value to RX success if
the packet was handled successfully.

[0] Reproduction steps:
 $ ip link add veth1 type veth peer name peer1
 $ ip link add veth2 type veth peer name peer2
 $ ifconfig peer1 5.5.5.6/24 up
 $ ip netns add ns0
 $ ip link set dev peer2 netns ns0
 $ ip netns exec ns0 ifconfig peer2 5.5.5.5/24 up
 $ ifconfig veth2 0 up
 $ ifconfig veth1 0 up

 #ingress forwarding veth1 <-> veth2
 $ tc qdisc add dev veth2 ingress
 $ tc qdisc add dev veth1 ingress
 $ tc filter add dev veth2 ingress prio 1 proto all flower \
   action mirred egress redirect dev veth1
 $ tc filter add dev veth1 ingress prio 1 proto all flower \
   action mirred egress redirect dev veth2

 #steal packet from peer1 egress to veth2 ingress, bypassing the veth pipe
 $ tc qdisc add dev peer1 clsact
 $ tc filter add dev peer1 egress prio 20 proto ip flower \
   action mirred ingress redirect dev veth1

 #run iperf and see connection not running
 $ iperf3 -s&
 $ ip netns exec ns0 iperf3 -c 5.5.5.6 -i 1

 #delete egress rule, and run again, now should work
 $ tc filter del dev peer1 egress
 $ ip netns exec ns0 iperf3 -c 5.5.5.6 -i 1

Fixes: f697c3e8b35c ("[NET]: Avoid unnecessary cloning for ingress filtering")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'qdisc-null-deref'

Zhengchao Shao says:

====================
net: fix null pointer access issue in qdisc

These three patches fix the same type of problem. Set the default qdisc,
and then construct an init failure scenario when the dev qdisc is
configured on mqprio to trigger the reset process. NULL pointer access
may occur during the reset process.

---
v2: for fq_codel, revert the patch
---
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: sfb: fix null pointer access issue when sfb_init() fails

When the default qdisc is sfb, if the qdisc of dev_queue fails to be
inited during mqprio_init(), sfb_reset() is invoked to clear resources.
In this case, the q->qdisc is NULL, and it will cause gpf issue.

The process is as follows:
qdisc_create_dflt()
sfb_init()
tcf_block_get()          --->failed, q->qdisc is NULL
...
qdisc_put()
...
sfb_reset()
qdisc_reset(q->qdisc)    --->q->qdisc is NULL
ops = qdisc->ops

The following is the Call Trace information:
general protection fault, probably for non-canonical address
0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
RIP: 0010:qdisc_reset+0x2b/0x6f0
Call Trace:
<TASK>
sfb_reset+0x37/0xd0
qdisc_reset+0xed/0x6f0
qdisc_destroy+0x82/0x4c0
qdisc_put+0x9e/0xb0
qdisc_create_dflt+0x2c3/0x4a0
mqprio_init+0xa71/0x1760
qdisc_create+0x3eb/0x1000
tc_modify_qdisc+0x408/0x1720
rtnetlink_rcv_msg+0x38e/0xac0
netlink_rcv_skb+0x12d/0x3a0
netlink_unicast+0x4a2/0x740
netlink_sendmsg+0x826/0xcc0
sock_sendmsg+0xc5/0x100
____sys_sendmsg+0x583/0x690
___sys_sendmsg+0xe8/0x160
__sys_sendmsg+0xbf/0x160
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f2164122d04
</TASK>

Fixes: e13e02a3c68d ("net_sched: SFB flow scheduler")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "net: sched: fq_codel: remove redundant resource cleanup in fq_codel_init()"

This reverts commit 494f5063b86cd6e972cb41a27e083c9a3664319d.

When the default qdisc is fq_codel, if the qdisc of dev_queue fails to be
inited during mqprio_init(), fq_codel_reset() is invoked to clear
resources. In this case, the flow is NULL, and it will cause gpf issue.

The process is as follows:
qdisc_create_dflt()
fq_codel_init()
...
q->flows_cnt = 1024;
...
q->flows = kvcalloc(...)      --->failed, q->flows is NULL
...
qdisc_put()
...
fq_codel_reset()
...
flow = q->flows + i   --->q->flows is NULL

The following is the Call Trace information:
general protection fault, probably for non-canonical address
0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:fq_codel_reset+0x14d/0x350
Call Trace:
<TASK>
qdisc_reset+0xed/0x6f0
qdisc_destroy+0x82/0x4c0
qdisc_put+0x9e/0xb0
qdisc_create_dflt+0x2c3/0x4a0
mqprio_init+0xa71/0x1760
qdisc_create+0x3eb/0x1000
tc_modify_qdisc+0x408/0x1720
rtnetlink_rcv_msg+0x38e/0xac0
netlink_rcv_skb+0x12d/0x3a0
netlink_unicast+0x4a2/0x740
netlink_sendmsg+0x826/0xcc0
sock_sendmsg+0xc5/0x100
____sys_sendmsg+0x583/0x690
___sys_sendmsg+0xe8/0x160
__sys_sendmsg+0xbf/0x160
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fd272b22d04
</TASK>

Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: cake: fix null pointer access issue when cake_init() fails

When the default qdisc is cake, if the qdisc of dev_queue fails to be
inited during mqprio_init(), cake_reset() is invoked to clear
resources. In this case, the tins is NULL, and it will cause gpf issue.

The process is as follows:
qdisc_create_dflt()
cake_init()
q->tins = kvcalloc(...)        --->failed, q->tins is NULL
...
qdisc_put()
...
cake_reset()
...
cake_dequeue_one()
b = &q->tins[...]   --->q->tins is NULL

The following is the Call Trace information:
general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:cake_dequeue_one+0xc9/0x3c0
Call Trace:
<TASK>
cake_reset+0xb1/0x140
qdisc_reset+0xed/0x6f0
qdisc_destroy+0x82/0x4c0
qdisc_put+0x9e/0xb0
qdisc_create_dflt+0x2c3/0x4a0
mqprio_init+0xa71/0x1760
qdisc_create+0x3eb/0x1000
tc_modify_qdisc+0x408/0x1720
rtnetlink_rcv_msg+0x38e/0xac0
netlink_rcv_skb+0x12d/0x3a0
netlink_unicast+0x4a2/0x740
netlink_sendmsg+0x826/0xcc0
sock_sendmsg+0xc5/0x100
____sys_sendmsg+0x583/0x690
___sys_sendmsg+0xe8/0x160
__sys_sendmsg+0xbf/0x160
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f89e5122d04
</TASK>

Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

ethernet: marvell: octeontx2 Fix resource not freed after malloc

fix rxsc and txsc not getting freed before going out of scope

Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Manank Patel <pmanank200502@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ACPI: PCI: Fix device reference counting in acpi_get_pci_dev()

Commit 63f534b8bad9 ("ACPI: PCI: Rework acpi_get_pci_dev()") failed
to reference count the device returned by acpi_get_pci_dev() as
expected by its callers which in some cases may cause device objects
to be dropped prematurely.

Add the missing get_device() to acpi_get_pci_dev().

Fixes: 63f534b8bad9 ("ACPI: PCI: Rework acpi_get_pci_dev()")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

drm/amdgpu: use DRM_SCHED_FENCE_DONT_PIPELINE for VM updates

Make sure that we always have a CPU round trip to let the submission
code correctly decide if a TLB flush is necessary or not.

Signed-off-by: Christian König <christian.koenig@amd.com>
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2113#note_1579296
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014081553.114899-2-christian.koenig@amd.com

nvmet: fix invalid memory reference in nvmet_subsys_attr_qid_max_show

The item passed into nvmet_subsys_attr_qid_max_show is not a member of
struct nvmet_port, it is part of nvmet_subsys.  Hence, don't try to
dereference it as struct nvme_ctrl pointer.

Fixes: 3e980f5995e0 ("nvmet: Expose max queues to configfs")
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20220913064203.133536-1-dwagner@suse.de
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet: fix workqueue MEM_RECLAIM flushing dependency

The keep alive timer needs to stay on nvmet_wq, and not
modified to reschedule on the system_wq.

This fixes a warning:
------------[ cut here ]------------
workqueue: WQ_MEM_RECLAIM
nvmet-wq:nvmet_rdma_release_queue_work [nvmet_rdma] is flushing
!WQ_MEM_RECLAIM events:nvmet_keep_alive_timer [nvmet]
WARNING: CPU: 3 PID: 1086 at kernel/workqueue.c:2628
check_flush_dependency+0x16c/0x1e0

Reported-by: Yi Zhang <yi.zhang@redhat.com>
Fixes: 8832cf922151 ("nvmet: use a private workqueue instead of the system workqueue")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-hwmon: kmalloc the NVME SMART log buffer

Recent commit 52fde2c07da6 ("nvme: set dma alignment to dword") has
caused a regression on our platform.

It turned out that the nvme_get_log() method invocation caused the
nvme_hwmon_data structure instance corruption.  In particular the
nvme_hwmon_data.ctrl pointer was overwritten either with zeros or with
garbage.  After some research we discovered that the problem happened
even before the actual NVME DMA execution, but during the buffer mapping.
Since our platform is DMA-noncoherent, the mapping implied the cache-line
invalidations or write-backs depending on the DMA-direction parameter.
In case of the NVME SMART log getting the DMA was performed
from-device-to-memory, thus the cache-invalidation was activated during
the buffer mapping.  Since the log-buffer isn't cache-line aligned, the
cache-invalidation caused the neighbour data to be discarded.  The
neighbouring data turned to be the data surrounding the buffer in the
framework of the nvme_hwmon_data structure.

In order to fix that we need to make sure that the whole log-buffer is
defined within the cache-line-aligned memory region so the
cache-invalidation procedure wouldn't involve the adjacent data. One of
the option to guarantee that is to kmalloc the DMA-buffer [1]. Seeing the
rest of the NVME core driver prefer that method it has been chosen to fix
this problem too.

Note after a deeper researches we found out that the denoted commit wasn't
a root cause of the problem. It just revealed the invalidity by activating
the DMA-based NVME SMART log getting performed in the framework of the
NVME hwmon driver. The problem was here since the initial commit of the
driver.

[1] Documentation/core-api/dma-api-howto.rst

Fixes: 400b6a7b13a3 ("nvme: Add hardware monitoring support")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-hwmon: consistently ignore errors from nvme_hwmon_init

An NVMe controller works perfectly fine even when the hwmon
initialization fails.  Stop returning errors that do not come from a
controller reset from nvme_hwmon_init to handle this case consistently.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>

drm/sched: add DRM_SCHED_FENCE_DONT_PIPELINE flag

Setting this flag on a scheduler fence prevents pipelining of jobs
depending on this fence. In other words we always insert a full CPU
round trip before dependent jobs are pushed to the pipeline.

Signed-off-by: Christian König <christian.koenig@amd.com>
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2113#note_1579296
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014081553.114899-1-christian.koenig@amd.com

nvme: add Guenther as nvme-hwmon maintainer

Given that non of the overall NVMe maintainers knows this code very
deeply it probably makes sense to add Guenther as an additional
MAINTAINER for it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Guenter Roeck <linux@roeck-us.net>

nvme-apple: don't limit DMA segement size

NVMe uses PRPs for data transfers and has no specific limit for a single
DMA segement.  Limiting the size will cause problems because the block
layer assumes PRP-ish devices using a virt boundary mask don't have a
segment limit.  And while this is true, we also really need to tell the
DMA mapping layer about it, otherwise dma-debug will trip over it.

Fixes: 5bd2927aceba ("nvme-apple: Add initial Apple SoC NVMe driver")
Suggested-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[hch: rewrote the commit message based on the PCIe commit]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>

nvme-pci: disable write zeroes on various Kingston SSD

Kingston SSDs do support NVMe Write_Zeroes cmd but take long time to
process.  The firmware version is locked by these SSDs, we can not expect
firmware improvement, so disable Write_Zeroes cmd.

Signed-off-by: Xander Li <xander_li@kingston.com.tw>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme: fix error pointer dereference in error handling

There is typo here so it releases the wrong variable.  "ctrl->admin_q"
was intended instead of "ctrl->fabrics_q".

Fixes: fe60e8c53411 ("nvme: add common helpers to allocate and free tagsets")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

netfilter: nf_tables: relax NFTA_SET_ELEM_KEY_END set flags requirements

Otherwise EINVAL is bogusly reported to userspace when deleting a set
element. NFTA_SET_ELEM_KEY_END does not need to be set in case of:

- insertion: if not present, start key is used as end key.
- deletion: only start key needs to be specified, end key is ignored.

Hence, relax the sanity check.

Fixes: 88cccd908d51 ("netfilter: nf_tables: NFTA_SET_ELEM_KEY_END requires concat and interval flags")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: rpfilter/fib: Set ->flowic_uid correctly for user namespaces.

Currently netfilter's rpfilter and fib modules implicitely initialise
->flowic_uid with 0. This is normally the root UID. However, this isn't
the case in user namespaces, where user ID 0 is mapped to a different
kernel UID. By initialising ->flowic_uid with sock_net_uid(), we get
the root UID of the user namespace, thus keeping the same behaviour
whether or not we're running in a user namepspace.

Note, this is similar to commit 8bcfd0925ef1 ("ipv4: add missing
initialization for flowi4_uid"), which fixed the rp_filter sysctl.

Fixes: 622ec2c9d524 ("net: core: add UID to flows, rules, and routes")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

ionic: catch NULL pointer issue on reconfig

It's possible that the driver will dereference a qcq that doesn't exist
when calling ionic_reconfigure_queues(), which causes a page fault BUG.

If a reduction in the number of queues is followed by a different
reconfig such as changing the ring size, the driver can hit a NULL
pointer when trying to clean up non-existent queues.

Fix this by checking to make sure both the qcqs array and qcq entry
exists bofore trying to use and free the entry.

Fixes: 101b40a0171f ("ionic: change queue count with no reset")
Signed-off-by: Brett Creeley <brett@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Link: https://lore.kernel.org/r/20221017233123.15869-1-snelson@pensando.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: hsr: avoid possible NULL deref in skb_clone()

syzbot got a crash [1] in skb_clone(), caused by a bug
in hsr_get_untagged_frame().

When/if create_stripped_skb_hsr() returns NULL, we must
not attempt to call skb_clone().

While we are at it, replace a WARN_ONCE() by netdev_warn_once().

[1]
general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f]
CPU: 1 PID: 754 Comm: syz-executor.0 Not tainted 6.0.0-syzkaller-02734-g0326074ff465 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022
RIP: 0010:skb_clone+0x108/0x3c0 net/core/skbuff.c:1641
Code: 93 02 00 00 49 83 7c 24 28 00 0f 85 e9 00 00 00 e8 5d 4a 29 fa 4c 8d 75 7e 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <0f> b6 04 02 4c 89 f2 83 e2 07 38 d0 7f 08 84 c0 0f 85 9e 01 00 00
RSP: 0018:ffffc90003ccf4e0 EFLAGS: 00010207

RAX: dffffc0000000000 RBX: ffffc90003ccf5f8 RCX: ffffc9000c24b000
RDX: 000000000000000f RSI: ffffffff8751cb13 RDI: 0000000000000000
RBP: 0000000000000000 R08: 00000000000000f0 R09: 0000000000000140
R10: fffffbfff181d972 R11: 0000000000000000 R12: ffff888161fc3640
R13: 0000000000000a20 R14: 000000000000007e R15: ffffffff8dc5f620
FS: 00007feb621e4700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007feb621e3ff8 CR3: 00000001643a9000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
hsr_get_untagged_frame+0x4e/0x610 net/hsr/hsr_forward.c:164
hsr_forward_do net/hsr/hsr_forward.c:461 [inline]
hsr_forward_skb+0xcca/0x1d50 net/hsr/hsr_forward.c:623
hsr_handle_frame+0x588/0x7c0 net/hsr/hsr_slave.c:69
__netif_receive_skb_core+0x9fe/0x38f0 net/core/dev.c:5379
__netif_receive_skb_one_core+0xae/0x180 net/core/dev.c:5483
__netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5599
netif_receive_skb_internal net/core/dev.c:5685 [inline]
netif_receive_skb+0x12f/0x8d0 net/core/dev.c:5744
tun_rx_batched+0x4ab/0x7a0 drivers/net/tun.c:1544
tun_get_user+0x2686/0x3a00 drivers/net/tun.c:1995
tun_chr_write_iter+0xdb/0x200 drivers/net/tun.c:2025
call_write_iter include/linux/fs.h:2187 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x9e9/0xdd0 fs/read_write.c:584
ksys_write+0x127/0x250 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: f266a683a480 ("net/hsr: Better frame dispatch")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221017165928.2150130-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bnxt_en: fix memory leak in bnxt_nvm_test()

Free the kzalloc'ed buffer before returning in the success path.

Fixes: 5b6ff128fdf6 ("bnxt_en: implement callbacks for devlink selftests")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/1666020742-25834-1-git-send-email-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drm/amdgpu: Fix for BO move issue

A user reported a bug on CAPE VERDE system where uvd_v3_1
IP component failed to initialize as there is an issue with
BO move code from one memory to other.

In function amdgpu_mem_visible() called by amdgpu_bo_move(),
when there are no blocks to compare or if we have a single
block then break the loop.

Fixes: 312b4dc11d4f ("drm/amdgpu: Fix VRAM BO swap issue")
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: dequeue mes scheduler during fini

[Why]
If mes is not dequeued during fini, mes will be in an uncleaned state
during reload, then mes couldn't receive some commands which leads to
reload failure.

[How]
Perform MES dequeue via MMIO after all the unmap jobs are done by mes
and before kiq fini.

v2: Move the dequeue operation inside kiq_hw_fini.

Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: enable thermal alert on smu_v13_0_10

enable thermal alert on smu_v13_0_10

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Program GC registers through RLCG interface in gfx_v11/gmc_v11

[Why]
L1 blocks most of GC registers accessing by MMIO.

[How]
Use RLCG interface to program GC registers under SRIOV VF in full access time.

Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix type of reset_type parameter in hqd_destroy() callback

When booting a kernel compiled with CONFIG_CFI_CLANG on a machine with
an RX 6700 XT, there is a CFI failure in kfd_destroy_mqd_cp():

  [   12.894543] CFI failure at kfd_destroy_mqd_cp+0x2a/0x40 [amdgpu] (target: hqd_destroy_v10_3+0x0/0x260 [amdgpu]; expected type: 0x8594d794)

Clang's kernel Control Flow Integrity (kCFI) makes sure that all
indirect call targets have a type that exactly matches the function
pointer prototype. In this case, hqd_destroy()'s third parameter,
reset_type, should have a type of 'uint32_t' but every implementation of
this callback has a third parameter type of 'enum kfd_preempt_type'.

Update the function pointer prototype to match reality so that there is
no more CFI violation.

Link: https://github.com/ClangBuiltLinux/linux/issues/1738
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Increase frame size limit for display_mode_vba_util_32.o

Building 32-bit images may fail with the following error.

drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c:
In function ‘dml32_UseMinimumDCFCLK’:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c:3142:1:
error: the frame size of 1096 bytes is larger than 1024 bytes

This is seen when building i386:allmodconfig with any of the following
compilers.

gcc (Debian 12.2.0-3) 12.2.0
gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0

The problem is not seen if the compiler supports GCC_PLUGIN_LATENT_ENTROPY
because in that case CONFIG_FRAME_WARN is already set to 2048 even for
32-bit builds.

dml32_UseMinimumDCFCLK() was introduced with commit dda4fb85e433
("drm/amd/display: DML changes for DCN32/321"). It declares a large
number of local variables. Increase the frame size for the affected
file to 2048, similar to other files in the same directory, to enable
32-bit build tests with affected compilers.

Fixes: dda4fb85e433 ("drm/amd/display: DML changes for DCN32/321")
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reported-by: Łukasz Bartosik <ukaszb@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add SMU IP v13.0.4 IF version define to V7

The pmfw has changed the driver interface version, so keep same with the
fw.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: update SMU IP v13.0.4 driver interface version

Update the SMU driver interface version to V7.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Init pm_attr_list when dpm is disabled

[Why]
In SRIOV multi-vf, dpm is always disabled, and pm_attr_list won't
be initialized. There will be a NULL pointer call trace after
removing the dpm check condition in amdgpu_pm_sysfs_fini.
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:amdgpu_device_attr_remove_groups+0x20/0x90 [amdgpu]
Call Trace:
  <TASK>
  amdgpu_pm_sysfs_fini+0x2f/0x40 [amdgpu]
  amdgpu_device_fini_hw+0xdf/0x290 [amdgpu]

[How]
List pm_attr_list should be initialized when dpm is disabled.

Fixes: a6ad27cec585fe ("drm/amd/pm: Remove redundant check condition")
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: disable cstate feature for gpu reset scenario

Suggested by PMFW team and same as what did for gfxoff feature.
This can address some Mode1Reset failures observed on SMU13.0.0.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fulfill SMU13.0.7 cstate control interface

Fulfill the functionality for cstate control.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fulfill SMU13.0.0 cstate control interface

Fulfill the functionality for cstate control.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add sriov vf ras support in amdgpu_ras_asic_supported

V2:
Add sriov vf ras support in amdgpu_ras_asic_supported.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Enable ras support for mp0 v13_0_0 and v13_0_10

V1:
Enable ras support for CHIP_IP_DISCOVERY asic type.

V2:
1. Change commit comment.
2. Enable ras support for mp0 v13_0_0 and v13_0_10.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Enable gmc soft reset on gmc_v11_0_3

Enable gmc soft reset on gmc_v11_0_3.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: skip mes self test for gc 11.0.3

Temporary disable mes self teset for gc 11.0.3.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: skip loading pptable from driver on secure board for smu_v13_0_10

skip loading pptable from driver on secure board since it's loaded from psp.

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Guan Yu <Guan.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: enable gfx clock gating features on smu_v13_0_10

enable gfx clock gating features on smu_v13_0_10

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: remove the pptable id override on smu_v13_0_10

remove the pptable id override on smu_v13_0_10,
and the id is fetched from vbios now.

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: temporarily disable thermal alert on smu_v13_0_10

temporarily disable thermal alert on smu_v13_0_10 due to kfd test fail.
will enable it again after confirming the thermal hardware setting.

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Revert "drm/amdgpu: getting fan speed pwm for vega10 properly"

This reverts commit 16fb4dca95daa9d8e037201166a58de8284f4268.

Unfortunately, that commit causes fan monitors can't be read and written
properly.

Fixes: 16fb4dca95daa9 ("drm/amdgpu: getting fan speed pwm for vega10 properly")
Signed-off-by: Asher Song <Asher.Song@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Refactor mode2 reset logic for v11.0.7

- refactor mode2 on v11.0.7 to align with aldebaran
- comment out using mode2 reset as default for now, will introduce
another controller to replace previous reset_level_mask

v2: squash in unused variable removal (Alex)

Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: let mode2 reset fallback to default when failure"

This reverts commit dac6b80818ac2353631c5a33d140d8d5508e2957.

This commit reverted the AMDGPU_SKIP_MODE2_RESET as it conflicts with
the original design of reset handler. Will redesign it.

Fixes: dac6b80818ac23 ("drm/amdgpu: let mode2 reset fallback to default when failure")
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: add debugfs amdgpu_reset_level"

This reverts commit 5bd8d53f6fa53eab5433698d1362dae2aa53c1cc.

This commit breaks the reset logic for aldebaran, revert it for now.
Will move the mask inside the reset handler.

Fixes: 5bd8d53f6fa53e ("drm/amdgpu: add debugfs amdgpu_reset_level")
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: set vm_update_mode=0 as default for Sienna Cichlid in SRIOV case

For asic with VF MMIO access protection avoid using CPU for VM table updates.
CPU pagetable updates have issues with HDP flush as VF MMIO access protection
blocks write to mmBIF_BX_DEV0_EPF0_VF0_HDP_MEM_COHERENCY_FLUSH_CNTL register
during sriov runtime.

v3: introduce virtualization capability flag AMDGPU_VF_MMIO_ACCESS_PROTECT
which indicates that VF MMIO write access is not allowed in sriov runtime

Signed-off-by: Danijel Slivka <danijel.slivka@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

dm clone: Fix typo in block_device format specifier

Use %pg for printing the block device name, instead of %pd.

Fixes: 385411ffba0c ("dm: stop using bdevname")
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: remove unnecessary assignment statement in alloc_dev()

Fixes: 74fe6ba923949 ("dm: convert to blk_alloc_disk/blk_cleanup_disk")
Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm verity: Add documentation for try_verify_in_tasklet option

Add documentation that was missing from commit 5721d4e5a9cd ("dm
verity: Add optional "try_verify_in_tasklet" feature").

Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm cache: delete the redundant word 'each' in comment

Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm raid: fix typo in analyse_superblocks code comment

Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm verity: enable WQ_HIGHPRI on verify_wq

WQ_HIGHPRI increases throughput and decreases disk latency when using
dm-verity. This is important in Android for camera startup speed.

The following tests were run by doing 60 seconds of random reads using
a dm-verity device backed by two ramdisks.

Without WQ_HIGHPRI
lat (usec): min=13, max=3947, avg=69.53, stdev=50.55
READ: bw=51.1MiB/s (53.6MB/s), 51.1MiB/s-51.1MiB/s (53.6MB/s-53.6MB/s)

With WQ_HIGHPRI:
lat (usec): min=13, max=7854, avg=31.15, stdev=30.42
READ: bw=116MiB/s (121MB/s), 116MiB/s-116MiB/s (121MB/s-121MB/s)

Further testing was done by measuring how long it takes to open a
camera on an Android device.

Without WQ_HIGHPRI
Total verity work queue wait times (ms):
880.960, 789.517, 898.852

With WQ_HIGHPRI:
Total verity work queue wait times (ms):
528.824, 439.191, 433.300

The average time to open the camera is reduced by 350ms (or 40-50%).

Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm raid: delete the redundant word 'that' in comment

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: change from DMWARN to DMERR or DMCRIT for fatal errors

Change DMWARN to DMERR in cases when there is an unrecoverable error.
Change DMWARN to DMCRIT when handling of a case is unimplemented.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

Merge tag 'for-6.1-rc1-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:

 - fiemap fixes:
      - add missing path cache update
      - fix processing of delayed data and tree refs during backref
        walking, this could lead to reporting incorrect extent sharing

 - fix extent range locking under heavy contention to avoid deadlocks

 - make it possible to test send v3 in debugging mode

 - update links in MAINTAINERS

* tag 'for-6.1-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  MAINTAINERS: update btrfs website links and files
  btrfs: ignore fiemap path cache if we have multiple leaves for a data extent
  btrfs: fix processing of delayed tree block refs during backref walking
  btrfs: fix processing of delayed data refs during backref walking
  btrfs: delete stale comments after merge conflict resolution
  btrfs: unlock locked extent area if we have contention
  btrfs: send: update command for protocol version check
  btrfs: send: allow protocol version 3 with CONFIG_BTRFS_DEBUG
  btrfs: add missing path cache update during fiemap

x86/resctrl: Fix min_cbm_bits for AMD

AMD systems support zero CBM (capacity bit mask) for cache allocation.
That is reflected in rdt_init_res_defs_amd() by:

  r->cache.arch_has_empty_bitmaps = true;

However given the unified code in cbm_validate(), checking for:

  val == 0 && !arch_has_empty_bitmaps

is not enough because of another check in cbm_validate():

  if ((zero_bit - first_bit) < r->cache.min_cbm_bits)

The default value of r->cache.min_cbm_bits = 1.

Leading to:

  $ cd /sys/fs/resctrl
  $ mkdir foo
  $ cd foo
  $ echo L3:0=0 > schemata
    -bash: echo: write error: Invalid argument
  $ cat /sys/fs/resctrl/info/last_cmd_status
    Need at least 1 bits in the mask

Initialize the min_cbm_bits to 0 for AMD. Also, remove the default
setting of min_cbm_bits and initialize it separately.

After the fix:

  $ cd /sys/fs/resctrl
  $ mkdir foo
  $ cd foo
  $ echo L3:0=0 > schemata
  $ cat /sys/fs/resctrl/info/last_cmd_status
    ok

Fixes: 316e7f901f5a ("x86/resctrl: Add struct rdt_cache::arch_has_{sparse, empty}_bitmaps")
Co-developed-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: James Morse <james.morse@arm.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/lkml/20220517001234.3137157-1-eranian@google.com

Merge tag 'erofs-for-6.1-rc2-fixes' of git://git./linux/kernel/git/xiang/erofs

Pull erofs fixes from Gao Xiang:

 - Fix invalid unmapped accesses when initializing compressed inodes

 - Fix up very rare hung on page lock after enabling compressed data
   deduplication

 - Fix up inplace decompression success rate

 - Take s_inode_list_lock to protect sb->s_inodes for fscache shared
   domain

* tag 'erofs-for-6.1-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: protect s_inodes with s_inode_list_lock for fscache
  erofs: fix up inplace decompression success rate
  erofs: shouldn't churn the mapping page for duplicated copies
  erofs: fix illegal unmapped accesses in z_erofs_fill_inode_lazy()

dm bufio: use the acquire memory barrier when testing for B_READING

The function test_bit doesn't provide any memory barrier. It may be
possible that the read requests that follow test_bit(B_READING, &b->state)
are reordered before the test, reading invalid data that existed before
B_READING was cleared.

Fix this bug by changing test_bit to test_bit_acquire. This is
particularly important on arches with weak(er) memory ordering
(e.g. arm64).

Depends-On: 8238b4579866 ("wait_on_bit: add an acquire memory barrier")
Depends-On: d6ffe6067a54 ("provide arch_test_bit_acquire for architectures that define test_bit")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

cifs: Fix memory leak when build ntlmssp negotiate blob failed

There is a memory leak when mount cifs:
  unreferenced object 0xffff888166059600 (size 448):
    comm "mount.cifs", pid 51391, jiffies 4295596373 (age 330.596s)
    hex dump (first 32 bytes):
      fe 53 4d 42 40 00 00 00 00 00 00 00 01 00 82 00  .SMB@...........
      00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    backtrace:
      [<0000000060609a61>] mempool_alloc+0xe1/0x260
      [<00000000adfa6c63>] cifs_small_buf_get+0x24/0x60
      [<00000000ebb404c7>] __smb2_plain_req_init+0x32/0x460
      [<00000000bcf875b4>] SMB2_sess_alloc_buffer+0xa4/0x3f0
      [<00000000753a2987>] SMB2_sess_auth_rawntlmssp_negotiate+0xf5/0x480
      [<00000000f0c1f4f9>] SMB2_sess_setup+0x253/0x410
      [<00000000a8b83303>] cifs_setup_session+0x18f/0x4c0
      [<00000000854bd16d>] cifs_get_smb_ses+0xae7/0x13c0
      [<000000006cbc43d9>] mount_get_conns+0x7a/0x730
      [<000000005922d816>] cifs_mount+0x103/0xd10
      [<00000000e33def3b>] cifs_smb3_do_mount+0x1dd/0xc90
      [<0000000078034979>] smb3_get_tree+0x1d5/0x300
      [<000000004371f980>] vfs_get_tree+0x41/0xf0
      [<00000000b670d8a7>] path_mount+0x9b3/0xdd0
      [<000000005e839a7d>] __x64_sys_mount+0x190/0x1d0
      [<000000009404c3b9>] do_syscall_64+0x35/0x80

When build ntlmssp negotiate blob failed, the session setup request
should be freed.

Fixes: 49bd49f983b5 ("cifs: send workstation name during ntlmssp session setup")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: set rc to -ENOENT if we can not get a dentry for the cached dir

We already set rc to this return code further down in the function but
we can set it earlier in order to suppress a smash warning.

Also fix a false positive for Coverity. The reason this is a false positive is
that this happens during umount after all files and directories have been closed
but mosetting on ->on_list to suppress the warning.

Reported-by: Dan carpenter <dan.carpenter@oracle.com>
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1525256 ("Concurrent data access violations")
Fixes: a350d6e73f5e ("cifs: enable caching of directories for which a lease is held")
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: use LIST_HEAD() and list_move() to simplify code

list_head can be initialized automatically with LIST_HEAD()
instead of calling INIT_LIST_HEAD().

Using list_move() instead of list_del() and list_add().

Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: Fix xid leak in cifs_get_file_info_unix()

If stardup the symlink target failed, should free the xid,
otherwise the xid will be leaked.

Fixes: 76894f3e2f71 ("cifs: improve symlink handling for smb2+")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: Fix xid leak in cifs_ses_add_channel()

Before return, should free the xid, otherwise, the
xid will be leaked.

Fixes: d70e9fa55884 ("cifs: try opening channels after mounting")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>