staging: rtl8712: Improve suspend/resume functionality.

Cancel pending URBs during suspend operation to avoid receiving ESHUTDOWN
in read/write completion callbacks while the device is suspended.

Receiving ESHUTDOWN in read/write completion callbacks will cause the
driver to enter a non-functioning "stopped" state from which the driver is
unable to recover without reloading the module.

Signed-off-by: Hemmo Nieminen <hemmo.nieminen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Cleanup _io_ops wrappers

This removes ugly and unnecessary declarations.

Signed-off-by: Mauro Dreissig <mukadr@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Remove unused CamelCase define

* Remove unused CamelCase in order to get rid of the corresponding
  checkpatch.pl "CHECK: Avoid CamelCase: <IEEE80211_QoS_DATAGRP>"

Signed-off-by: Michael Hornung <mhornung.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Coding style: Fix alignment

* Fix alignment which did not match open parenthesis

Signed-off-by: Michael Hornung <mhornung.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Replace FSF mailing address by URL

* Fix checkpatch.pl output about not including the paragraph
  about writing to the Free Software Foundation's mailing address

Signed-off-by: Michael Hornung <mhornung.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Coding style: Fix missing spaces

* Add missing spaces around bitwise OR operation in order to get
  rid of checkpatch.pl's "CHECK: spaces preferred around that '|'"

Signed-off-by: Michael Hornung <mhornung.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Coding style: Make use of BIT macro

* Replace all occurences of (1<<x) by BIT(x) in order to get rid
  of checkpatch.pl "CHECK" output "Prefer using the BIT macro"

Signed-off-by: Michael Hornung <mhornung.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Coding style: Remove multiple blank lines

* Remove multiple blank lines in order to get rid of checkpatch.pl
  "CHECK" output

Signed-off-by: Michael Hornung <mhornung.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: rtl871x_sta_mgt: Remove wrapper function

Remove wrapper function mfree_sta_priv_lock() that can be replaced by a
direct call to mfree_all_stainfo().

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Fixes unnecessary return warning

This patch fixes checkpatch.pl warning in rtw_mlme_ext.c file.
WARNING: void function return statements are not generally useful

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: use %pM and %ph formatting

use %pM and %ph specifiers instead of placing each byte on stack.
(staging/rtl8723au/TODO)

Signed-off-by: Daniil Leshchev <meleodr@gmail.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: change parameter type in rtl8723a_set_rssi_cmd declaration

Previosly the function had the following prototype:
int rtl8723a_set_rssi_cmd(struct rtw_adapter *padapter, u8 *param)

My suggestion here is to modify the prototype this way:
int rtl8723a_set_rssi_cmd(struct rtw_adapter *padapter, u32 param)

We can do this based on the following considerations:
1. rtl8723a_set_rssi_cmd is used only with 32-bit "param" values
2. There's no point in using "u8 *param" until we pass param length
3. As we just read "param", it's ok to pass it by value

Signed-off-by: Anatoly Stepanov <drivengroove@gmail.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: hal: rtl8723a_hal_init: fixed 4 spelling errors.

Fixed four spelling errors.

Signed-off-by: Jiading Gai <jiading.gai.github@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: fbtft: add ssd1325 controller support

That patch adds support for SSD1325 controller.
That is 4bpp grayscale OLED display controller present in several
displays eq: Winstar WEX012864

Signed-off-by: Alexey Mednyy <swexru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: fbtft: add ssd1305 controller support

That patch adds support for SSD1305 controller.
That is monochrome OLED display controller present in several
displays eq: Winstar WEX012864

Signed-off-by: Alexey Mednyy <swexru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: use to_platform_device()

Use to_platform_device() instead of open-coding it.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: use to_spi_device

Use to_spi_device() instead of open-coding it.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Remove unused and duplicated defines

This patch makes use of the standard MIPI Display Command Set to remove
some of duplicate defines from the headers.

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Use standard MIPI DCS command defines for hx8340bn

This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Use standard MIPI DCS command defines for tinylcd

This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Use standard MIPI DCS command defines for fbtft driver

This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Use standard MIPI DCS command defines for st7735r

This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Use standard MIPI DCS command defines for s6d02a1

This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Use standard MIPI DCS command defines for ili9486

This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Use standard MIPI DCS command defines for ili9481

This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Use standard MIPI DCS command defines for ili9341

This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Use standard MIPI DCS command defines for ili9340

This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Use standard MIPI DCS command defines for ili9163

This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Use standard MIPI DCS command defines for hx8357d

This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Use standard MIPI DCS command defines for hx8353d

This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: fbtft: Removed commented out/dead code

Deleted various commented out lines that have been replaced by write_reg()

Signed-off-by: Ben Gilbert <gillie59978@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: fbtft: fbtft-core: Removed unnecessary checks

The driver core clears the driver data to NULL after device_release
or on probe failure.

Signed-off-by: Nizam Haider <nijamh@cdac.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fwserial: (coding-style) rewrite comparisons to NULL as "!fifo->data"

Rewrite multiple comparisons to NULL as "!fifo->data"
to fix the last coding style problems of this file.

Signed-off-by: Christian Colic <colic.christian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers:staging:fwserial Fix No space is necessary after a cast

This fixes all "No space is necessary after a cast" messages

Signed-off-by: Bogicevic Sasa <brutallesale@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging:octeon:removed blank line after {

Removed blank line after curly braces.
Found using checkpatch.pl.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: octeon-usb: octeon-hcd.c: fixed coding style related warnings

fixed coding style warnings related to comment blocks

Signed-off-by: Saatvik Arya <aryasaatvik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: Fix logic for waking octeon ethernet tx queue.

Only wake tx queue when driver queue is back within bounds.

The logic here was just reenabling the queue when any buffers had been
freed.  the queue was stopped whenever the length exceeded 1000
(MAX_OUT_QUEUE_DEPTH), but then was essentially immediately started again.
On a congested link, the queue length would just keep increasing up to
around 8000 (for average size packets), at which point the hardware would
start refusing the packets and they would begin to be dropped.
This prevented the qdisc layer from effectively managing and prioritising
packets, as essentially all packets were being allowed into the driver
queue and then were being dropped by the hardware.

This change only restarts the queue if the length is less than 1000
(MAX_OUT_QUEUE_DEPTH).

Reviewed-by: Kyeong Yoo <kyeong.yoo@alliedtelesis.co.nz>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Richard Laing <richard.laing@alliedtelesis.co.nz>
Signed-off-by: Luuk Paulussen <luuk.paulussen@alliedtelesis.co.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-ethernet: fix TCP/UDP checksum calc

If the network portion of a frame is preceded by more than 14 bytes of
data, the checksum calculated in the HW is done over the wrong data and
is put in the wrong place.
In our use case an Octeon ethernet controller is connected to a Broadcom
switch chip. Extra data is included in the frame prior to egressing the
Octeon ethernet (i.e. 4 bytes of an 802.1Q tag, 4 bytes of a proprietary
BCM tag later stripped by the switch chip). This extra data causes the
checksum calculation to be incorrect.
The fix in this patch is to make use of the network header offset of the
skb. This enables the checksum to be calculated correctly.
This has been tested in both the configuration with the switch chip in
the egress path (as described above) and in a simple connection direct
to the wire.

Reviewed-by: Richard Laing <richard.laing@alliedtelesis.co.nz>
Reviewed-by: Tim Beale <tim.beale@alliedtelesis.co.nz>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: Added MSI support to the MC bus driver

Initialize/Cleanup ITS-MSI support for the MC bus driver at driver
init/exit time. Associate an MSI domain with each DPAA2 child device.

Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: Added DPRC interrupt handler

The interrupt handler for DPRC IRQs is added. DPRC IRQs are
generated for hot plug events related to DPAA2 objects in a given
DPRC. These events include, creating/destroying DPAA2 objects in
the DPRC, changing the "plugged" state of DPAA2 objects and moving
objects between DPRCs.

Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: Fixed bug in dprc_probe() error path

Destroy mc_io in error path in dprc_probe() only if the mc_io was
created in this function.

Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: set MSI domain for DPRC objects

THE MSI domain associated with a root DPRC object is
obtained form the device tree. Child DPRCs inherit
the parent DPRC MSI domain.

Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: Populate the IRQ pool for an MC bus instance

Scan the corresponding DPRC container to get total count
of IRQs needed by all its child DPAA2 objects. Then,
preallocate a set of MSI IRQs with the DPRC's ICID
(GIT-ITS device Id) to populate the the DPRC's IRQ pool.
Each child DPAA2 object in the DPRC and the DPRC object itself
will allocate their necessary MSI IRQs from the DPRC's IRQ pool,
in their driver probe function.

Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: Changed DPRC built-in portal's mc_io to be atomic

The DPRC built-in portal's mc_io is used to send commands to the MC
to program MSIs for MC objects. This is done by the
fsl_mc_msi_write_msg() callback, which is invoked by the generic MSI
layer with interrupts disabled. As a result, the mc_io used in
fsl_mc_msi_write_msg needs to be an atomic mc_io.

Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: Extended MC bus allocator to include IRQs

All the IRQs for DPAA2 objects in the same DPRC must use
the ICID of that DPRC, as their device Id in the GIC-ITS.
Thus, all these IRQs must share the same ITT table in the GIC.
As a result, a pool of IRQs with the same device Id must be
preallocated per DPRC (fsl-mc bus instance). So, the fsl-mc
bus object allocator is extended to also provide services
to allocate IRQs to DPAA2 devices, from their parent fsl-mc bus
IRQ pool.

Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: Added GICv3-ITS support for FSL-MC MSIs

Added platform-specific MSI support layer for FSL-MC devices.

Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: Added generic MSI support for FSL-MC devices

Created an MSI domain for the fsl-mc bus-- including functions
to create a domain, find a domain, alloc/free domain irqs, and
bus specific overrides for domain and irq_chip ops.

Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fsl-mc: msi: Added FSL-MC-specific member to the msi_desc's union

FSL-MC is a bus type different from PCI and platform, so it needs
its own member in the msi_desc's union.

Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqdomain: Added domain bus token DOMAIN_BUS_FSL_MC_MSI

Since an FSL-MC bus is a new bus type that is neither PCI nor
PLATFORM, we need a new domain bus token to disambiguate the
IRQ domain for FSL-MC MSIs.

Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging:speakup:add space around '|'

Fix checkpatch.pl check:CHECK: spaces preferred around that '|'.
Add spaces around operands to fix these warnings.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: use list_for_each_entry*

Use list_for_each_entry*() instead of list_for_each*() to simplify
the code.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers:staging:wlan-ng Fix space preferred around that messages

This fixes all "space preferred around that ..." messages from
checkpatch.pl

Signed-off-by: Bogicevic Sasa <brutallesale@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers:staging:wlan-ng Fix all no space necesarry after a cast

This fixes all messages "no space necesarry after a cast" in cfg80211.c
file

Signed-off-by: Bogicevic Sasa <brutallesale@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Fixed more comments

Fixed more comment issues

Signed-off-by: Gavin O'Leary <gavinoleary3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: fixed a comment

Fixed a comment style issue.

Signed-off-by: Gavin O'Leary <gavinoleary3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: (coding style) remove unnecessary blank line before "}"

Fix checkpatch checks: "Blank lines aren't necessary before a close brace '}' "
Remove two unnecessary blank lines.

Signed-off-by: Christian Colic <colic.christian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wlan-ng: p80211wep: fixed a block comment style issue

Fixed a comment style issue.

Signed-off-by: Gavin O'Leary <gavinoleary3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: NULL comparisons made elegant

Elegance added for NULL comparisons

Signed-off-by: Pranjal Bhor <bhor.pranjal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Open parenthesis alignment style fix

Alignment of lines matched with open parenthesis

Signed-off-by: Pranjal Bhor <bhor.pranjal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Coding style fix for casting operation

Removed spaces after casting operating

Signed-off-by: Pranjal Bhor <bhor.pranjal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Removed blank lines after braces

Blank lines before closing braces and after opening braces
have been removed.

Signed-off-by: Pranjal Bhor <bhor.pranjal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Logical continuation fixes

Logical continuation coding style issues fixed while
condition checking

Signed-off-by: Pranjal Bhor <bhor.pranjal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Fixed block comments coding style issue

All block comment lines now begin with "*" and end with "*/"
on a new line.

Signed-off-by: Pranjal Bhor <bhor.pranjal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: vt6656: Fixed multiple commenting codig style issues.

Fixed multiple comment blocks that didn't comply with the
kernels coding style.

Signed-off-by: maomao xu <albert008.xu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers:staging:vt6656: Fix coding style issues

This patch fixes the following issues reported by checkpatch.pl:
- code indent should use tabs where possible

Signed-off-by: Sergey Lysanov <lysanovsergey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: fix definitions of DEVICE_FLAGS_* flags

test_bit and set_bit take the bit number to operate on, rather than a
mask. This patch fixes the DEVICE_FLAGS_* definitions so that they represent
the bit index in priv->flags as opposed to the mask returned by the
BIT macro.

Signed-off-by: Alexey Tulia <alexey.tulia@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: mac.c replace void __iomem * with struct vnt_private

Moving void __iomem down one level in the following functions
MACbIsRegBitsOn
MACbIsRegBitsOff
MACbIsIntDisable
MACvSetShortRetryLimit
MACvSetLongRetryLimit
MACvGetLongRetryLimit
MACvSetLoopbackMode
MACvSaveContext
MACvRestoreContext
MACbSoftwareReset
MACbSafeSoftwareReset
MACbSafeRxOff
MACbSafeTxOff
MACbSafeStop
MACbShutdown
MACvInitialize
MACvSetCurrRx0DescAddr
MACvSetCurrRx1DescAddr
MACvSetCurrTXDescAddr
MACvSetCurrTx0DescAddrEx
MACvSetCurrAC0DescAddrEx
MACvSetCurrSyncDescAddrEx
MACvSetCurrATIMDescAddrEx
MACvTimer0MicroSDelay
MACvOneShotTimer1MicroSec
MACvSetMISCFifo
MACbPSWakeup
MACvSetKeyEntry
MACvDisableKeyEntry

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: PSbIsNextTBTTWakeUp Rename bWakeUp wake_up

Removing camel case.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: rf.c/h Replace DeviceContext with vnt_private

Removing void and including device.h for power.h

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: power.c replace pDevice with priv

Removing camel case.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: rf.c rename bResult ret.

Removing camel case and reflecting return value.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: set_channel replace bResult with ret

Removing camel case.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: set_channel replace void handler.

Replace with struct vnt_private.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: channel.c replace pDevice with priv

Removing camel case.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: use eth_broadcast_addr() in place of memset

Replace the memset of array to broadcast address 0xFF by using the
eth_broadcast_addr() API

Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: use list_first_entry_or_null()

Use list_first_entry_or_null() instead of list_empty() + container_of()
to simplify the code.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: print OUI with %*ph

There is no need to pass each byte as a parameter when printing values in hex
format. We rather use %*ph specifier for that.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: replace open-coded print_hex_dump()

No need to reinvent a wheel, i.e. print_hex_dump(). Replace an open-coded
variant by generic kernel helper.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: provide an absolute path to include folder

Otherwise compiler will complain as follows

  CC [M]  drivers/staging/rtl8188eu/core/rtw_ap.o
cc1: warning: drivers/staging/rtl8188eu/include: No such file or directory [-Wmissing-include-dirs]

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu: core: rtw_debug: fixed a parentheses coding style issue

Removed unnecessary parentheses.

Signed-off-by: Chris Elliott <chris@uksysadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove an extra space

drivers/staging/rtl8188eu/core/rtw_wlan_util.c:1377 check_assoc_AP() warn: inconsistent indenting

Signed-off-by: Alexey Tulia <alexey.tulia@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_mlme_ext.c: simplify call to issue_action_BA()

Using the ternary operator allows to more concisely write the same
code, and to stay within 80 characters without even increasing the
number of lines.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rename camelcase bAcceptAddbaReq

There is such a field both in struct mlme_ext_info and in struct
registry_priv. Rename both.

Also fix checkpatch issue in the lines touched:
  WARNING: line over 80 characters

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove useless variable rtw_AcceptAddbaReq

rtw_AcceptAddbaReq is a static variable, it is set once and never
modified. It is referenced only once, to assign its value to a member
of struct registry_priv with practically the same name.

Get rid of the variable, and move the meaningful part of the comment
near the declaration of the relevant field of struct registry_priv.

Raises a new checkpatch issue, which is fixed in a later commit:
  CHECK: Avoid CamelCase: <bAcceptAddbaReq>

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_mlme_ext.c: remove commented code

This line is connented since the initial import in commit 7b464c9fa5cc
("staging: r8188eu: Add files for new driver - part 4") and there's no
comment stating how it could ever be useful.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: don't cast to void* when calling memset()

The first argument to memset() is (void *), the explicit typecasts are
not needed. They just make code less readable.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: add spaces around binary '*'

Fix checkpatch issue:
  CHECK: spaces preferred around that '*' (ctx:VxV)

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb, fix typos

The code contained typos like "structur", "fointers", etc. Fix that.

No code change, only comments.

Signed-off-by: Matej Vasek <xvasek1@fi.muni.cz>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <linux-fbdev@vger.kernel.org>
Cc: <devel@driverdev.osuosl.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers:staging:sm750fb Fix all space preferred around messages

This fixes all messages from checkpatch.pl about space preferred

Signed-off-by: Bogicevic Sasa <brutallesale@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: fix style for if clause

Fix for checkpatch.pl complaints:
ERROR: that open brace { should be on the previous line
CHECK: spaces preferred around that '+' (ctx:VxV)

Signed-off-by: Othmar Pasteka <pasteka@kabsi.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of POWER_MODE_CTRL multi-bit field

Use more straight-forward definitions for multi-bit field of
POWER_MODE_CTRL register and use open-coded implementation for register
manipulations.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use BIT macro for POWER_MODE_CTRL single-bit fields

Replace complex definition of POWER_MODE_CTRL register fields with BIT()
macro and use open-coded implementation for register manipulations.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of MODE0_GATE multi-bit fields

Use more straight-forward definitions for multi-bit fields of MODE0_GATE
register.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use BIT macro for MODE0_GATE single-bit fields

Replace complex definition of MODE0_GATE register fields with BIT() macro
and use open-coded implementation for register manipulations.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of CURRENT_GATE multi-bit fields

Use more straight-forward definitions for multi-bit fields of
CURRENT_GATE register and use open-coded implementation for register
manipulation.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: set{Memory, Master}Clock: rename ulReg to reg

Remove HungarianCamelCase notation

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use BIT macro for CURRENT_GATE single-bit fields

Replace complex definition of CURRENT_GATE register fields with BIT() macro
and use open-coded implementation for register manipulations.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of MISC_CTRL multi-bit fields

Use more straight-forward definitions for multi-bit fields of MISC_CTRL
register and use open-coded implementation for register manipulations.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use BIT macro for GPIO_MUX single-bit fields

Replace complex definition of GPIO_MUX register fields with BIT() macro
and use open-coded implementation for register manipulations.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: ddk750_sii164: fix defines for i2c{Read, Write}reg

For case when USE_HW_I2C is not defined, i2c{Read,Write}reg was wrongly
defined to use old function names.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>