coroutines, c++: Add test for PR 96517.

This PR was fixed by r12-5255-gdaa9c6b015, this adds
the testcase.

Signed-off-by: Iain Sandoe <iain@sandoe.co.uk>
gcc/testsuite/ChangeLog:

PR c++/96517
* g++.dg/coroutines/pr96517.C: New test.

rs6000: Fix fake vec_promote overload

rs6000-overload.def defines one instance of vec_promote so that it can be
registered with the front end.  Actual expansion of the vec_promote overload
is done with special-case code in rs6000-c.c.  During another cleanup, I
observed that the fake instance has the wrong number of arguments.  Fix that.

2021-12-17  Bill Schmidt  <wschmidt@linux.ibm.com>

gcc/
* config/rs6000/rs6000-overload.def (__builtin_vec_promote): Add second
argument.

testsuite: pragma-optimize.c requires ifunc.

gcc/testsuite/ChangeLog:

* gcc.target/powerpc/pragma-optimize.c: Require ifunc support.

vect: Fix multi-vector SLP gather loads [PR103744]

This PR shows that I didn't properly test the multi-vector case when
adding support for SLP gather loads.  The patch fixes that case using
the same approach as we do for non-SLP cases: keep the scalar base
the same, but iterate through the (also multi-vector) vector offsets.
“vec_num * j + i” is already used elsewhere as a way of handling both
the multi-vector SLP case and the multi-vector non-SLP case.

gcc/
PR tree-optimization/103744
* tree-vect-stmts.c (vectorizable_load): Handle multi-vector
SLP gather loads.

gcc/testsuite/
PR tree-optimization/103744
* gcc.dg/vect/pr103744-1.c: New test.
* gcc.dg/vect/pr103744-2.c: Likewise.

docs: fix option name reference

gcc/ChangeLog:

* doc/invoke.texi: Rename to -fstack-protector.

docs: Fix spelling issues in -fipa-strict-aliasing.

gcc/ChangeLog:

* doc/invoke.texi: Fix spelling issues.

slp: check that the operation we're combing is a boolean operation [PR103741]

It seems I forgot to check that the operation we're combing when masking the
predicated together are actually predicates types.

Without it we end up accidentally trying to combine a value and a mask.

gcc/ChangeLog:

PR tree-optimization/103741
* tree-vect-stmts.c (vectorizable_operation): Check for boolean.

gcc/testsuite/ChangeLog:

PR tree-optimization/103741
* gcc.target/aarch64/pr103741.c: New test.

libgcc, Darwin: Add missing build dependencies.

There was a race condition where the link for the new shared EH library
(only used on earlier Darwin) could fail because the new crts had not been
copied to the gcc directory.  This can cause a build failure (although
currently only seen on powerpc-darwin).

Fixed by adding specific dependency on the crts and on the multi target.
We also add the declaration header for the Darwin10 unwinder shim to the
powerpc cases, since we build that there for Rosetta use.

Signed-off-by: Iain Sandoe <iain@sandoe.co.uk>
libgcc/ChangeLog:

* config.host: Add shim declaration header to powerpc*-darwin builds.
* config/rs6000/t-darwin-ehs: Remove dependency on the powerpc end
file.
* config/t-darwin-ehs: Add dependencies to the shared unwinder
objects.
* config/t-slibgcc-darwin: Add extra_parts to the dependencies for
the shared EH lib.  Add all-multi to the dependencies for the
libgcc_s.1.dylib redirections.

Sync config.sub: 2021-10-27

ChangeLog:

* config.sub: Sync from master.

Darwin, Driver: Avoid a link line for empty commands.

We were pushing a spec value for weak_reference_mismatches unconditionally
which is not needed (the value was the default) and the side-effect of
this was that we appeared to need to drive a link command; leading to
unexpected diagnostics for cases where gcc was invoked with an empty
command line.

Also we were pushing flags for sysroot, os minimum version and controls
even if the command line was empty.

Signed-off-by: Iain Sandoe <iain@sandoe.co.uk>
gcc/ChangeLog:

* config/darwin-driver.c (darwin_driver_init): Exit from the
option handling early if the command line is definitely enpty.
* config/darwin.h (SUBTARGET_DRIVER_SELF_SPECS): Remove
setting for the default content of weak_reference_mismatches.

Darwin, ppc: Additional change for r12-5974.

This adds a missed change from r12-5974-g926d64906af.
The builin_decls array has been renamed to drop the trailing
_x that was used during the main changes to the builtins.

Signed-off-by: Iain Sandoe <iain@sandoe.co.uk>
gcc/ChangeLog:

* config/rs6000/darwin.h: Drop trailing _x from the
builtin_decls array name.

Revert "Fixed typo"

This reverts commit 06cd44b4387a9f6ab46f377f42ee5be9cf11bf15.

Add combine splitter to transform vpternlogd/vpcmpeqd/vpxor/vblendvps to vblendvps for ~op0

gcc/ChangeLog:

PR target/100738
* config/i386/sse.md (*avx_cmp<mode>3_lt, *avx_cmp<mode>3_ltint):
Remove MEM_P restriction and add force_reg for operands[2].
(*avx_cmp<mode>3_ltint_not): Add new define_insn_and_split.

gcc/testsuite/ChangeLog:

PR target/100738
* g++.target/i386/avx512vl-pr100738-1.C: New test.

__builtin_dynamic_object_size: Recognize builtin

Recognize the __builtin_dynamic_object_size builtin and add paths in the
object size path to deal with it, but treat it like
__builtin_object_size for now.  Also add tests to provide the same
testing coverage for the new builtin name.

gcc/ChangeLog:

* builtins.def (BUILT_IN_DYNAMIC_OBJECT_SIZE): New builtin.
* tree-object-size.h: Move object size type bits enum from
tree-object-size.c and add new value OST_DYNAMIC.
* builtins.c (expand_builtin, fold_builtin_2): Handle it.
(fold_builtin_object_size): Handle new builtin and adjust for
change to compute_builtin_object_size.
* tree-object-size.c: Include builtins.h.
(compute_builtin_object_size): Adjust.
(early_object_sizes_execute_one,
dynamic_object_sizes_execute_one): New functions.
(object_sizes_execute): Rename insert_min_max_p argument to
early.  Handle BUILT_IN_DYNAMIC_OBJECT_SIZE and call the new
functions.
* doc/extend.texi (__builtin_dynamic_object_size): Document new
builtin.

gcc/testsuite/ChangeLog:

* g++.dg/ext/builtin-dynamic-object-size1.C: New test.
* g++.dg/ext/builtin-dynamic-object-size2.C: Likewise.
* gcc.dg/builtin-dynamic-alloc-size.c: Likewise.
* gcc.dg/builtin-dynamic-object-size-1.c: Likewise.
* gcc.dg/builtin-dynamic-object-size-10.c: Likewise.
* gcc.dg/builtin-dynamic-object-size-11.c: Likewise.
* gcc.dg/builtin-dynamic-object-size-12.c: Likewise.
* gcc.dg/builtin-dynamic-object-size-13.c: Likewise.
* gcc.dg/builtin-dynamic-object-size-14.c: Likewise.
* gcc.dg/builtin-dynamic-object-size-15.c: Likewise.
* gcc.dg/builtin-dynamic-object-size-16.c: Likewise.
* gcc.dg/builtin-dynamic-object-size-17.c: Likewise.
* gcc.dg/builtin-dynamic-object-size-18.c: Likewise.
* gcc.dg/builtin-dynamic-object-size-19.c: Likewise.
* gcc.dg/builtin-dynamic-object-size-2.c: Likewise.
* gcc.dg/builtin-dynamic-object-size-3.c: Likewise.
* gcc.dg/builtin-dynamic-object-size-4.c: Likewise.
* gcc.dg/builtin-dynamic-object-size-5.c: Likewise.
* gcc.dg/builtin-dynamic-object-size-6.c: Likewise.
* gcc.dg/builtin-dynamic-object-size-7.c: Likewise.
* gcc.dg/builtin-dynamic-object-size-8.c: Likewise.
* gcc.dg/builtin-dynamic-object-size-9.c: Likewise.
* gcc.dg/builtin-object-size-16.c: Adjust to allow inclusion
from builtin-dynamic-object-size-16.c.
* gcc.dg/builtin-object-size-17.c: Likewise.

Signed-off-by: Siddhesh Poyarekar <siddhesh@gotplt.org>

tree-object-size: Use trees and support negative offsets

Transform tree-object-size to operate on tree objects instead of host
wide integers.  This makes it easier to extend to dynamic expressions
for object sizes.

The compute_builtin_object_size interface also now returns a tree
expression instead of HOST_WIDE_INT, so callers have been adjusted to
account for that.

The trees in object_sizes are each an object_size object with members
size (the bytes from the pointer to the end of the object) and wholesize
(the size of the whole object).  This allows analysis of negative
offsets, which can now be allowed to the extent of the object bounds.
Tests have been added to verify that it actually works.

gcc/ChangeLog:

* tree-object-size.h (compute_builtin_object_size): Return tree
instead of HOST_WIDE_INT.
* builtins.c (fold_builtin_object_size): Adjust.
* gimple-fold.c (gimple_fold_builtin_strncat): Likewise.
* ubsan.c (instrument_object_size): Likewise.
* tree-object-size.c (object_size): New structure.
(object_sizes): Change type to vec<object_size>.
(initval): New function.
(unknown): Use it.
(size_unknown_p, size_initval, size_unknown): New functions.
(object_sizes_unknown_p): Use it.
(object_sizes_get): Return tree.
(object_sizes_initialize): Rename from object_sizes_set_force
and set VAL parameter type as tree.  Add new parameter WHOLEVAL.
(object_sizes_set): Set VAL parameter type as tree and adjust
implementation.  Add new parameter WHOLEVAL.
(size_for_offset): New function.
(decl_init_size): Adjust comment.
(addr_object_size): Change PSIZE parameter to tree and adjust
implementation.  Add new parameter PWHOLESIZE.
(alloc_object_size): Return tree.
(compute_builtin_object_size): Return tree in PSIZE.
(expr_object_size, call_object_size, unknown_object_size):
Adjust for object_sizes_set change.
(merge_object_sizes): Drop OFFSET parameter and adjust
implementation for tree change.
(plus_stmt_object_size): Call collect_object_sizes_for directly
instead of merge_object_size and call size_for_offset to get net
size.
(cond_expr_object_size, collect_object_sizes_for,
object_sizes_execute): Adjust for change of type from
HOST_WIDE_INT to tree.
(check_for_plus_in_loops_1): Likewise and skip non-positive
offsets.

gcc/testsuite/ChangeLog:

* gcc.dg/builtin-object-size-1.c (test9): New test.
(main): Call it.
* gcc.dg/builtin-object-size-2.c (test8): New test.
(main): Call it.
* gcc.dg/builtin-object-size-3.c (test9): New test.
(main): Call it.
* gcc.dg/builtin-object-size-4.c (test8): New test.
(main): Call it.
* gcc.dg/builtin-object-size-5.c (test5, test6, test7): New
tests.

Signed-off-by: Siddhesh Poyarekar <siddhesh@gotplt.org>

c++: tweak comment

The comment documented a parameter that no longer exists.

gcc/cp/ChangeLog:

* constraint.cc (deduce_concept_introduction): Adjust comment.

c++: layout of aggregate base with DMI [PR103681]

C++14 changed the definition of 'aggregate' to allow default member
initializers, but such classes still need to be considered "non-POD for the
purpose of layout" for ABI compatibility with C++11 code.  It seems rare to
derive from such a class, as evidenced by how long this bug has
survived (since r216750 in 2014), but it's certainly worth fixing.

We only warn when we were failing to allocate another field into the
tail padding of the newly aggregate class; this is the only ABI impact.

This also changes end_of_class to consider all data members, not just empty
data members; that used to be an additional flag, removed in r9-5710, but I
don't see any reason not to always include them.  This makes the result of
the function correspond to the ABI nvsize term and its nameless counterpart
that does include virtual bases.

When looking closely at other users of end_of_class, I realized that we were
assuming that the latter corresponded to the ABI dsize term, but it doesn't
if the class ends with an empty virtual base (in the rare case that the
empty base can't be assigned offset 0), and this matters for layout of
[[no_unique_address]].  So I added another mode that returns the desired
value for that case.  I'm not adding a warning for this ABI fix because it's
a C++20 feature.

PR c++/103681

gcc/ChangeLog:

* common.opt (fabi-version): Add v17.

gcc/cp/ChangeLog:

* cp-tree.h (struct lang_type): Add non_pod_aggregate.
(CLASSTYPE_NON_POD_AGGREGATE): New.
* class.c (check_field_decls): Set it.
(check_bases_and_members): Check it.
(check_non_pod_aggregate): New.
(enum eoc_mode): New.
(end_of_class): Always include non-empty fields.
Add eoc_nv_or_dsize mode.
(include_empty_classes, layout_class_type): Adjust.

gcc/c-family/ChangeLog:

* c-opts.c (c_common_post_options): Update defaults.

gcc/testsuite/ChangeLog:

* g++.dg/abi/macro0.C: Update value.
* g++.dg/abi/no_unique_address6.C: New test.
* g++.dg/abi/nsdmi-aggr1.C: New test.
* g++.dg/abi/nsdmi-aggr1a.C: New test.

Daily bump.

Testsuite: Tweak gcc.dg/20021029-1.c for nios2.

This test needs to be built with -G0 on nios2 to avoid treating the array
as small data.

2021-12-16  Sandra Loosemore  <sandra@codesourcery.com>

gcc/testsuite/
* gcc.dg/20021029-1.c: Build with -G0 for nios2.

c++: delayed noexcept in member function template [PR99980]

Some time ago I noticed that we don't properly delay parsing of
noexcept for member function templates.  This patch fixes that.

It didn't work because even though we set CP_PARSER_FLAGS_DELAY_NOEXCEPT
in cp_parser_member_declaration, member template declarations take
a different path: we call cp_parser_template_declaration and return
prior to setting the flag.

PR c++/99980

gcc/cp/ChangeLog:

* parser.c (cp_parser_single_declaration): Maybe pass
CP_PARSER_FLAGS_DELAY_NOEXCEPT down to cp_parser_init_declarator.

gcc/testsuite/ChangeLog:

* g++.dg/cpp0x/noexcept71.C: New test.

Check for class type before assuming a type is one [PR103703].

Resolves:
PR c++/103703 - ICE with -Wmismatched-tags with friends and templates

gcc/cp/ChangeLog:

PR c++/103703
* parser.c (class_decl_loc_t::diag_mismatched_tags): Check for class
type before assuming a type is one.

gcc/testsuite/ChangeLog:

PR c++/103703
* g++.dg/warn/Wmismatched-tags-9.C: New test.

Fix member alignment for all targets [PR103751].

Resolves:
PR testsuite/103751 - FAIL: gcc.dg/Warray-bounds-48.c (test for excess errors)

gcc/testsuite/ChangeLog:
PR testsuite/103751
* gcc.dg/Warray-bounds-48.c: Fix member alignment.

c++: two-stage name lookup for overloaded operators [PR51577]

In order to properly implement two-stage name lookup for dependent
operator expressions, we need to remember the result of unqualified
lookup of the operator at template definition time, and reuse that
result rather than performing another unqualified lookup at
instantiation time.

Ideally we could just store the lookup in the expression directly, but
as pointed out in r9-6405 this isn't really possible since we use the
standard tree codes to represent most dependent operator expressions.

We could perhaps create a new tree code to represent dependent operator
expressions, with enough operands to store the lookup along with
everything else, but that'd require a lot of careful work to make sure
we handle this new tree code properly across the frontend.

But currently type-dependent operator (and call) expressions are given
an empty TREE_TYPE, which dependent_type_p treats as dependent, so this
field is effectively unused except to signal that the expression is
type-dependent.  It'd be convenient if we could store the lookup there
while preserving the dependent-ness of the expression.

To that end, this patch creates a new kind of type, called
DEPENDENT_OPERATOR_TYPE, which we give to dependent operator expressions
and into which we can store the result of operator lookup at template
definition time (DEPENDENT_OPERATOR_TYPE_SAVED_LOOKUPS).  Since this
type is always dependent (by definition), and since the frontend doesn't
seem to care much about the exact type of a type-dependent expression,
using this type in place of a NULL_TREE type seems to "just work"; only
dependent_type_p and WILDCARD_TYPE_P need to be adjusted to return true
for this new type.

The rest of the patch mostly consists of adding the necessary plumbing
to pass DEPENDENT_OPERATOR_TYPE_SAVED_LOOKUPS to add_operator_candidates,
adjusting all callers of build_x_* appropriately, and removing the now
unnecessary push_operator_bindings mechanism.

In passing, this patch simplifies finish_constraint_binary_op to avoid
using build_x_binary_op for building a binary constraint-expr; we don't
need to consider operator overloads here, as the &&/|| inside a
constraint effectively always has the built-in meaning (since atomic
constraints must have bool type).

This patch also makes FOLD_EXPR_OP yield a tree_code instead of a raw
INTEGER_CST.

Finally, this patch adds the XFAILed test operator-8.C which is about
broken two-stage name lookup for rewritten non-dependent operator
expressions, an existing bug that's otherwise only documented in
build_new_op.

PR c++/51577
PR c++/83035
PR c++/100465

gcc/cp/ChangeLog:

* call.c (add_operator_candidates): Add lookups parameter.
Use it to avoid performing a second unqualified lookup when
instantiating a dependent operator expression.
(build_new_op): Add lookups parameter and pass it appropriately.
* constraint.cc (finish_constraint_binary_op): Use
build_min_nt_loc instead of build_x_binary_op.
* coroutines.cc (build_co_await): Adjust call to build_new_op.
* cp-objcp-common.c (cp_common_init_ts): Mark
DEPENDENT_OPERATOR_TYPE appropriately.
* cp-tree.def (DEPENDENT_OPERATOR_TYPE): Define.
* cp-tree.h (WILDCARD_TYPE_P): Accept DEPENDENT_OPERATOR_TYPE.
(FOLD_EXPR_OP_RAW): New, renamed from ...
(FOLD_EXPR_OP): ... this.  Change this to return the tree_code directly.
(DEPENDENT_OPERATOR_TYPE_SAVED_LOOKUPS): Define.
(templated_operator_saved_lookups): Define.
(build_new_op): Add lookups parameter.
(build_dependent_operator_type): Declare.
(build_x_indirect_ref): Add lookups parameter.
(build_x_binary_op): Likewise.
(build_x_unary_op): Likewise.
(build_x_compound_expr): Likewise.
(build_x_modify_expr): Likewise.
* cxx-pretty-print.c (get_fold_operator): Adjust after
FOLD_EXPR_OP change.
* decl.c (start_preparsed_function): Don't call
push_operator_bindings.
* decl2.c (grok_array_decl): Adjust calls to build_new_op.
* method.c (do_one_comp): Likewise.
(build_comparison_op): Likewise.
* module.cc (trees_out::type_node): Handle DEPENDENT_OPERATOR_TYPE.
(trees_in::tree_node): Likewise.
* name-lookup.c (lookup_name): Revert r11-2876 change.
(op_unqualified_lookup): Remove.
(maybe_save_operator_binding): Remove.
(discard_operator_bindings): Remove.
(push_operator_bindings): Remove.
* name-lookup.h (maybe_save_operator_binding): Remove.
(push_operator_bindings): Remove.
(discard_operator_bindings): Remove.
* parser.c (cp_parser_unary_expression): Adjust calls to build_x_*.
(cp_parser_binary_expression): Likewise.
(cp_parser_assignment_expression): Likewise.
(cp_parser_expression): Likewise.
(do_range_for_auto_deduction): Likewise.
(cp_convert_range_for): Likewise.
(cp_parser_perform_range_for_lookup): Likewise.
(cp_parser_template_argument): Likewise.
(cp_parser_omp_for_cond): Likewise.
(cp_parser_omp_for_incr): Likewise.
(cp_parser_omp_for_loop_init): Likewise.
(cp_convert_omp_range_for): Likewise.
(cp_finish_omp_range_for): Likewise.
* pt.c (fold_expression): Adjust after FOLD_EXPR_OP change. Pass
templated_operator_saved_lookups to build_x_*.
(tsubst_omp_for_iterator): Adjust call to build_x_modify_expr.
(tsubst_expr) <case COMPOUND_EXPR>: Pass
templated_operator_saved_lookups to build_x_*.
(tsubst_copy_and_build) <case INDIRECT_REF>: Likewise.
<case tcc_unary>: Likewise.
<case tcc_binary>: Likewise.
<case MODOP_EXPR>: Likewise.
<case COMPOUND_EXPR>: Likewise.
(dependent_type_p_r): Return true for DEPENDENT_OPERATOR_TYPE.
* ptree.c (cxx_print_type): Handle DEPENDENT_OPERATOR_TYPE.
* semantics.c (finish_increment_expr): Adjust call to
build_x_unary_op.
(finish_unary_op_expr): Likewise.
(handle_omp_for_class_iterator): Adjust calls to build_x_*.
(finish_omp_cancel): Likewise.
(finish_unary_fold_expr): Use build_dependent_operator_type.
(finish_binary_fold_expr): Likewise.
* tree.c (cp_free_lang_data): Don't call discard_operator_bindings.
* typeck.c (rationalize_conditional_expr): Adjust call to
build_x_binary_op.
(op_unqualified_lookup): Define.
(build_dependent_operator_type): Define.
(build_x_indirect_ref): Add lookups parameter and use
build_dependent_operator_type.
(build_x_binary_op): Likewise.
(build_x_array_ref): Likewise.
(build_x_unary_op): Likewise.
(build_x_compound_expr_from_list): Adjust call to
build_x_compound_expr.
(build_x_compound_expr_from_vec): Likewise.
(build_x_compound_expr): Add lookups parameter and use
build_dependent_operator_type.
(cp_build_modify_expr): Adjust call to build_new_op.
(build_x_modify_expr): Add lookups parameter and use
build_dependent_operator_type.
* typeck2.c (build_x_arrow): Adjust call to build_new_op.

libcc1/ChangeLog:

* libcp1plugin.cc (plugin_build_unary_expr): Adjust call to
build_x_unary_op.
(plugin_build_binary_expr): Adjust call to build_x_binary_op.

gcc/testsuite/ChangeLog:

* g++.dg/lookup/operator-3.C: Split out operator overload
declarations into ...
* g++.dg/lookup/operator-3-ops.h: ... here.
* g++.dg/lookup/operator-3a.C: New test.
* g++.dg/lookup/operator-4.C: New test.
* g++.dg/lookup/operator-4a.C: New test.
* g++.dg/lookup/operator-5.C: New test.
* g++.dg/lookup/operator-5a.C: New test.
* g++.dg/lookup/operator-6.C: New test.
* g++.dg/lookup/operator-7.C: New test.
* g++.dg/lookup/operator-8.C: New test.

i386: Enable VxHF vector modes lower ABI levels [PR103571]

Enable VxHF vector modes for SSE2, AVX and AVX512F ABIs.

2021-12-16  Uroš Bizjak  <ubizjak@gmail.com>

gcc/ChangeLog:

PR target/103571
* config/i386/i386.h (VALID_AVX256_REG_MODE): Add V16HFmode.
(VALID_AVX256_REG_OR_OI_VHF_MODE): Replace with ...
(VALID_AVX256_REG_OR_OI_MODE): ... this.  Remove V16HFmode.
(VALID_AVX512F_SCALAR_MODE): Remove HImode and HFmode.
(VALID_AVX512FP16_SCALAR_MODE): New.
(VALID_AVX512F_REG_MODE): Add V32HFmode.
(VALID_SSE2_REG_MODE): Add V8HFmode, V4HFmode and V2HFmode.
(VALID_SSE2_REG_VHF_MODE): Remove.
(VALID_INT_MODE_P): Add V2HFmode.
* config/i386/i386.c (function_arg_advance_64):
Remove explicit mention of V16HFmode and V32HFmode.
(ix86_hard_regno_mode_ok): Remove explicit mention of XImode
and V32HFmode, use VALID_AVX512F_REG_OR_XI_MODE instead.
Use VALID_AVX512FP_SCALAR_MODE for TARGET_aVX512FP16.
Use VALID_AVX256_REG_OR_OI_MODE instead of
VALID_AVX256_REG_OR_OI_VHF_MODE and VALID_SSE2_REG_MODE instead
of VALID_SSE2_REG_VHF_MODE.
(ix86_set_reg_reg_cost): Remove usge of VALID_AVX512FP16_REG_MODE.
(ix86_vector_mode_supported): Ditto.

gcc/testsuite/ChangeLog:

PR target/103571
* gcc.target/i386/pr102812.c (dg-final): Do not scan for movdqa.

Fixed typo

ChangeLog:

* config.sub: Fix typo.

opts: do not do sanity check when an error is seen

PR target/103709

gcc/c-family/ChangeLog:

* c-pragma.c (handle_pragma_pop_options): Do not check
global options modification when an error is seen in parsing
of options (pragmas or attributes).

pragma: respect pragma in lambda functions

In g:01ad8c54fdca we started supporting target pragma changes
that are primarily caused by optimization option. The same can happen
in the opposite way and we need to check for changes both
in optimization_current_node and target_option_current_node.

PR c++/103696

gcc/ChangeLog:

* attribs.c (decl_attributes): Check if
target_option_current_node is changed.

gcc/testsuite/ChangeLog:

* g++.target/i386/pr103696.C: New test.

Fix FLUSH IOSTAT value

PR libfortran/101255

libgfortran/ChangeLog:

* io/file_pos.c: Fix error code.

gcc/testsuite/ChangeLog:

* gfortran.dg/iostat_5.f90: New file.

Fix timezone handling near year boundaries

PR libfortran/98507

libgfortran/ChangeLog:

* intrinsics/time_1.h: Prefer clock_gettime() over
  gettimeofday().
* intrinsics/date_and_time.c: Fix timezone wrapping.

gcc/testsuite/ChangeLog:

* gfortran.dg/date_and_time_1.f90: New file.

docs: add missing leading dash for option.

gcc/ChangeLog:

* doc/invoke.texi: Add missing dash.

rs6000: Refactor altivec_build_resolved_builtin

While replacing the built-in machinery, we agreed to defer some necessary
refactoring of the overload processing.  This patch cleans it up considerably.

I've put in one FIXME for an additional level of cleanup that should be done
independently.  The various helper functions (resolve_VEC_*) can be simplified
if we move the argument processing in altivec_resolve_overloaded_builtin
earlier.  But this requires making nontrivial changes to those functions that
will need careful review.  Let's do that in a later patch.

2021-12-16  Bill Schmidt  <wschmidt@linux.ibm.com>

gcc/
* config/rs6000/rs6000-c.c (resolution): New enum.
(resolve_vec_mul): New function.
(resolve_vec_cmpne): Likewise.
(resolve_vec_adde_sube): Likewise.
(resolve_vec_addec_subec): Likewise.
(resolve_vec_splats): Likewise.
(resolve_vec_extract): Likewise.
(resolve_vec_insert): Likewise.
(resolve_vec_step): Likewise.
(find_instance): Likewise.
(altivec_resolve_overloaded_builtin): Many cleanups.  Call factored-out
functions.  Move variable declarations closer to uses.  Add commentary.
Remove unnecessary levels of braces.  Avoid use of gotos.  Change
misleading variable names.  Use switches over if-else-if chains.

aarch64: fix: ls64 tests fail on aarch64_be [PR103729]

This patch is sorting issue with LS64 intrinsics tests failing with
AArch64_be targets.

gcc/ChangeLog:

PR target/103729
* config/aarch64/aarch64-simd.md (aarch64_movv8di): Allow big endian
targets to move V8DI.

For -foffload= suggest also 'disable' and 'default' [PR103644]

gcc/ChangeLog:

PR driver/103644
* gcc.c (check_offload_target_name): Add 'default' and 'disable'
to the candidate list.

Revert "Sync with binutils: GCC: Pass --plugin to AR and RANLIB"

This reverts commit bf8cdd35117dea2049abbeebcdf14de11b323ef7.

Verbose support in analyze_brprob_spec

Also add verbose argument support like analyze_brprob.py

contrib/ChangeLog:

* analyze_brprob_spec.py: Add verbose argument.

Daily bump.

c++: Allow constexpr decltype(auto) [PR102229]

My r11-2202 was trying to enforce [dcl.type.auto.deduct]/4, which says
"If the placeholder-type-specifier is of the form type-constraint[opt]
decltype(auto), T shall be the placeholder alone."  But this made us
reject 'constexpr decltype(auto)', which, after clarification from CWG,
should be valid.  [dcl.type.auto.deduct]/4 is supposed to be a syntactic
constraint, not semantic, so it's OK that the constexpr marks the object
as const.

As a consequence, checking TYPE_QUALS in do_auto_deduction is too late,
and we have a FIXME there anyway.  So in this patch I'm attempting to
detect 'const decltype(auto)' earlier.  If I'm going to use TYPE_QUALS,
it needs to happen before we mark the object as const due to constexpr,
that is, before grokdeclarator's

  /* A `constexpr' specifier used in an object declaration declares
     the object as `const'.  */
  if (constexpr_p && innermost_code != cdk_function)
    ...

Constrained decltype(auto) was a little problem, hence the TYPENAME
check.  But in a typename context you can't use decltype(auto) anyway,
I think.

PR c++/102229

gcc/cp/ChangeLog:

* decl.c (check_decltype_auto): New.
(grokdeclarator): Call it.
* pt.c (do_auto_deduction): Don't check decltype(auto) here.

gcc/testsuite/ChangeLog:

* g++.dg/cpp1y/decltype-auto5.C: New test.

testsuite: Be more informative for ICEs

For example, for the two (FAIL, XFAIL)
'gcc/testsuite/lib/gcc-dg.exp:gcc-dg-test-1' cases:

    -FAIL: g++.dg/modules/xtreme-header-3_a.H -std=c++17 (internal compiler error)
    +FAIL: g++.dg/modules/xtreme-header-3_a.H -std=c++17 (internal compiler error: tree check: expected var_decl or function_decl or field_decl or type_decl or concept_decl or template_decl, have namespace_decl in get_merge_kind, at cp/module.cc:10072)

    -FAIL: gfortran.dg/gomp/clauses-1.f90   -O  (internal compiler error)
    +FAIL: gfortran.dg/gomp/clauses-1.f90   -O  (internal compiler error: Segmentation fault)

    -XFAIL: c-c++-common/goacc/kernels-decompose-ice-1.c (internal compiler error)
    +XFAIL: c-c++-common/goacc/kernels-decompose-ice-1.c (internal compiler error: in lower_omp_target, at omp-low.c:13147)

    -XFAIL: g++.dg/cpp1z/constexpr-lambda26.C  -std=c++17 (internal compiler error)
    +XFAIL: g++.dg/cpp1z/constexpr-lambda26.C  -std=c++17 (internal compiler error: in cxx_eval_constant_expression, at cp/constexpr.c:6954)

That allows for more easily spotting when during development you're trading one
ICE for another.

gcc/testsuite/
* lib/fortran-torture.exp (fortran-torture-compile)
(fortran-torture-execute): Be more informative for ICEs.
* lib/gcc-defs.exp (${tool}_check_compile): Likewise.
* lib/gcc-dg.exp (gcc-dg-test-1): Likewise.
* lib/go-torture.exp (go-torture-compile, go-torture-execute):
Likewise.

Sync with binutils: Support the PGO build for binutils+gdb

Sync with binutils for building binutils with LTO:

1dbde357be3 Add missing changes to Makefile.tpl
af019bfde9b Support the PGO build for binutils+gdb

Add the --enable-pgo-build[=lto] configure option.  When binutils+gdb
is not built together with GCC, --enable-pgo-build enables the PGO build:

1. First build with -fprofile-generate.
2. Use "make maybe-check-*" to generate profiling data and pass -i to make
to ignore errors when generating profiling data.
3. Use "make clean" to remove the previous build.
4. Rebuild with -fprofile-use.

With --enable-pgo-build=lto, -flto=jobserver -ffat-lto-objects are used
together with -fprofile-generate and -fprofile-use.  Add '+' to the command
line for recursive make to support -flto=jobserver -ffat-lto-objects.

NB: --enable-pgo-build=lto enables the PGO build with LTO while
--enable-lto enables LTO support in toolchain.

BZ binutils/26766
* Makefile.tpl (BUILD_CFLAGS): New.
(CFLAGS): Append $(BUILD_CFLAGS).
(CXXFLAGS): Likewise.
(PGO_BUILD_GEN_FLAGS_TO_PASS): New.
(PGO_BUILD_TRAINING_CFLAGS): Likewise.
(PGO_BUILD_TRAINING_CXXFLAGS): Likewise.
(PGO_BUILD_TRAINING_FLAGS_TO_PASS): Likewise.
(PGO_BUILD_TRAINING_MFLAGS): Likewise.
(PGO_BUILD_USE_FLAGS_TO_PASS): Likewise.
(PGO-TRAINING-TARGETS): Likewise.
(PGO_BUILD_TRAINING): Likewise.
(all): Add '+' to the command line for recursive make.  Support
the PGO build.
* configure.ac: Add --enable-pgo-build[=lto].
AC_SUBST PGO_BUILD_GEN_CFLAGS, PGO_BUILD_USE_CFLAGS and
PGO_BUILD_LTO_CFLAGS.  Enable the PGO build in Makefile.
* Makefile.in: Regenerated.
* configure: Likewise.

Sync with binutils: GCC: Pass --plugin to AR and RANLIB

Sync with binutils for building binutils with LTO:

50ad1254d50 GCC: Pass --plugin to AR and RANLIB

Detect GCC LTO plugin.  Pass --plugin to AR and RANLIB to support LTO
build.

ChangeLog:

* Makefile.tpl (AR): Add @AR_PLUGIN_OPTION@
(RANLIB): Add @RANLIB_PLUGIN_OPTION@.
* configure.ac: Include config/gcc-plugin.m4.
AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION.
* libtool.m4 (_LT_CMD_OLD_ARCHIVE): Pass --plugin to AR and
RANLIB if possible.
* Makefile.in: Regenerated.
* configure: Likewise.

config/

* gcc-plugin.m4 (GCC_PLUGIN_OPTION): New.

libiberty/

* Makefile.in (AR): Add @AR_PLUGIN_OPTION@
(RANLIB): Add @RANLIB_PLUGIN_OPTION@.
(configure_deps): Depend on ../config/gcc-plugin.m4.
* configure.ac: AC_SUBST AR_PLUGIN_OPTION and
RANLIB_PLUGIN_OPTION.
* aclocal.m4: Regenerated.
* configure: Likewise.

zlib/

* configure: Regenerated.

libstdc++: Overload std::__to_address for __gnu_cxx::__normal_iterator.

Prefer to overload __to_address to partially specialize std::pointer_traits because
std::pointer_traits would be mostly useless. Moreover partial specialization of
pointer_traits<__normal_iterator<P, C>> fails to rebind C, so you get incorrect types
like __normal_iterator<long*, vector<int>>. In the case of __gnu_debug::_Safe_iterator
the to_pointer method is impossible to implement correctly because we are missing
the parent container to associate the iterator to.

libstdc++-v3/ChangeLog:

* include/bits/stl_iterator.h
(std::pointer_traits<__gnu_cxx::__normal_iterator<>>): Remove.
(std::__to_address(const __gnu_cxx::__normal_iterator<>&)): New for C++11 to C++17.
* include/debug/safe_iterator.h
(std::__to_address(const __gnu_debug::_Safe_iterator<__gnu_cxx::__normal_iterator<>,
_Sequence>&)): New for C++11 to C++17.
* testsuite/24_iterators/normal_iterator/to_address.cc: Add check on std::vector::iterator
to validate both __gnu_cxx::__normal_iterator<> __to_address overload in normal mode and
__gnu_debug::_Safe_iterator in _GLIBCXX_DEBUG mode.

d: Merge upstream dmd 93108bb9e, druntime 6364e010, phobos 575b67a9b.

D front-end changes:

    - Import dmd v2.098.1-beta.1.
    - Default extern(C++) compatibility to C++17.

Druntime changes:

    - Import druntime v2.098.1-beta.1.
    - Fix definition of stat_t on MIPS64 (PR103604)

Phobos changes:

    - Import phobos v2.098.1-beta.1.

gcc/d/ChangeLog:

* d-lang.cc (d_init_options): Set default -fextern-std= to C++17.
* dmd/MERGE: Merge upstream dmd 93108bb9e.
* gdc.texi (Runtime Options): Document the default for -fextern-std=.

libphobos/ChangeLog:

PR d/103604
* configure: Regenerate.
* configure.ac (libtool_VERSION): Update to 3:0:0.
* libdruntime/MERGE: Merge upstream druntime 6364e010.
* src/MERGE: Merge upstream phobos 575b67a9b.
* testsuite/libphobos.traits/all_satisfy.d: New test.
* testsuite/libphobos.traits/traits.exp: New test.

Add new test [PR78969].

gcc/testsuite/ChangeLog:
PR tree-optimization/78969
* gcc.dg/tree-ssa/builtin-snprintf-warn-6.c: New test.

configure: Account CXXFLAGS in gcc-plugin.m4.

We now use a C++ compiler so that we need to process
CXXFLAGS as well as CFLAGS in the gcc-plugin config
fragment.

Signed-off-by: Iain Sandoe <iain@sandoe.co.uk>
config/ChangeLog:

* gcc-plugin.m4: Save and process CXXFLAGS.

gcc/ChangeLog:

* configure: Regenerate.

libcc1/ChangeLog:

* configure: Regenerate.

nvptx: Add -misa=sm_75 and -misa=sm_80

Add new target macros TARGET_SM75 and TARGET_SM80.  Add support for
__builtin_tanhf, HFmode exp2/tanh and also for HFmode min/max, controlled by
TARGET_SM75 and TARGET_SM80 respectively.

The following has been tested on nvptx-none, hosted on x86_64-pc-linux-gnu
with a "make" and "make -k check" with no new failures.

gcc/ChangeLog:

* config/nvptx/nvptx-opts.h (ptx_isa): PTX_ISA_SM75 and PTX_ISA_SM80
ISA levels.
* config/nvptx/nvptx.opt: Add sm_75 and sm_80 to -misa.
* config/nvptx/nvptx.h (TARGET_SM75, TARGET_SM80):
New helper macros to conditionalize functionality on target ISA.
* config/nvptx/nvptx-c.c (nvptx_cpu_cpp_builtins): Add __PTX_SM__
support for the new ISA levels.
* config/nvptx/nvptx.c (nvptx_file_start): Add support for TARGET_SM75
and TARGET_SM80.
* config/nvptx/nvptx.md (define_c_enum "unspec"): New UNSPEC_TANH.
(define_mode_iterator HSFM): New iterator for HFmode and SFmode.
(exp2hf2): New define_insn controlled by TARGET_SM75.
(tanh<mode>2): New define_insn controlled by TARGET_SM75.
(sminhf3, smaxhf3): New define_isnns controlled by TARGET_SM80.

gcc/testsuite/ChangeLog:

* gcc.target/nvptx/float16-2.c: New test case.
* gcc.target/nvptx/tanh-1.c: New test case.

[nvptx] Add -mptx=7.0

Add support for ptx isa version 7.0, required for the addition of -misa=sm_75
and -misa=sm_80.

Tested by setting the default ptx isa version to 7.0, and doing a build and
libgomp test run.

gcc/ChangeLog:

* config/nvptx/nvptx-opts.h (enum ptx_version): Add PTX_VERSION_7_0.
* config/nvptx/nvptx.c (nvptx_file_start): Handle TARGET_PTX_7_0.
* config/nvptx/nvptx.h (TARGET_PTX_7_0): New macro.
* config/nvptx/nvptx.opt (ptx_version): Add 7.0.

aarch64: Don't classify vector pairs as short vectors [PR103094]

In this PR we were wrongly classifying a pair of 8-byte vectors
as a 16-byte “short vector” (in the AAPCS64 sense).  As the
comment in the patch says, this stems from an old condition
in aarch64_short_vector_p that is too loose, but that would
be difficult to tighten now.

We can still do the right thing for the newly-added modes though,
since there are no backwards compatibility concerns there.

Co-authored-by: Tamar Christina <tamar.christina@arm.com>
gcc/
PR target/103094
* config/aarch64/aarch64.c (aarch64_short_vector_p): Return false
for structure modes, rather than ignoring the type in that case.

gcc/testsuite/
PR target/103094
* gcc.target/aarch64/pr103094.c: New test.

c++: Fix warning word splitting [PR103713]

PR c++/103713

gcc/cp/ChangeLog:

* tree.c (maybe_warn_parm_abi): Fix warning word splitting.

middle-end: REE should always check all vector usages, even if it finds a defining def. [PR103350]

This and the report in PR103632 are caused by a bug in REE where it generates
incorrect code.

It's trying to eliminate the following zero extension

(insn 54 90 102 2 (set (reg:V4SI 33 v1)
        (zero_extend:V4SI (reg/v:V4HI 40 v8)))
     (nil))

by folding it in the definition of `v8`:

(insn 2 5 104 2 (set (reg/v:V4HI 40 v8)
        (reg:V4HI 32 v0 [156]))
     (nil))

which is fine, except that `v8` is also used by the extracts, e.g.:

(insn 11 10 12 2 (set (reg:SI 1 x1)
        (zero_extend:SI (vec_select:HI (reg/v:V4HI 40 v8)
                (parallel [
                        (const_int 3)
                    ]))))
     (nil))

REE replaces insn 2 by folding insn 54 and placing it at the definition site of
insn 2, so before insn 11.

Trying to eliminate extension:
(insn 54 90 102 2 (set (reg:V4SI 33 v1)
        (zero_extend:V4SI (reg/v:V4HI 40 v8)))
     (nil))
Tentatively merged extension with definition (copy needed):
(insn 2 5 104 2 (set (reg:V4SI 33 v1)
        (zero_extend:V4SI (reg:V4HI 32 v0)))
     (nil))

to produce

(insn 2 5 110 2 (set (reg:V4SI 33 v1)
        (zero_extend:V4SI (reg:V4HI 32 v0)))
     (nil))
(insn 110 2 104 2 (set (reg:V4SI 40 v8)
        (reg:V4SI 33 v1))
     (nil))

The new insn 2 using v0 directly is correct, but the insn 110 it creates is
wrong, `v8` should still be V4HI.

or it also needs to eliminate the zero extension from the extracts, so instead
of

(insn 11 10 12 2 (set (reg:SI 1 x1)
        (zero_extend:SI (vec_select:HI (reg/v:V4HI 40 v8)
                (parallel [
                        (const_int 3)
                    ]))))
     (nil))

it should be

(insn 11 10 12 2 (set (reg:SI 1 x1)
        (vec_select:SI (reg/v:V4SI 40 v8)
                (parallel [
                        (const_int 3)
                    ])))
     (nil))

without doing so the indices have been remapped in the extension and so we
extract the wrong elements

At any other optimization level but -Os ree seems to abort so this doesn't
trigger:

Trying to eliminate extension:
(insn 54 90 101 2 (set (reg:V4SI 32 v0)
        (zero_extend:V4SI (reg/v:V4HI 40 v8)))
     (nil))
Elimination opportunities = 2 realized = 0

purely due to the ordering of instructions. REE doesn't check uses of `v8`
because it assumes that with a zero extended value, you still have access to the
lower bits by using the the bottom part of the register.

This is true for scalar but not for vector.  This would have been fine as well
if REE had eliminated the zero_extend on insn 11 and the rest but it doesn't do
so since REE can only handle cases where the SRC value are REG_P.

It does try to do this in add_removable_extension:

 1160      /* For vector mode extensions, ensure that all uses of the
 1161         XEXP (src, 0) register are in insn or debug insns, as unlike
 1162         integral extensions lowpart subreg of the sign/zero extended
 1163         register are not equal to the original register, so we have
 1164         to change all uses or none and the current code isn't able
 1165         to change them all at once in one transaction.  */

However this code doesn't trigger for the example because REE doesn't check the
uses if the defining instruction doesn't feed into another extension..

Which is bogus. For vectors it should always check all usages.

r12-2288-g8695bf78dad1a42636775843ca832a2f4dba4da3 simply exposed this as it now
lowers VEC_SELECT 0 into the RTL canonical form subreg 0 which causes REE to run
more often.

gcc/ChangeLog:

PR rtl-optimization/103350
* ree.c (add_removable_extension): Don't stop at first definition but
inspect all.

gcc/testsuite/ChangeLog:

PR rtl-optimization/103350
* gcc.target/aarch64/pr103350-1.c: New test.
* gcc.target/aarch64/pr103350-2.c: New test.

testsuite: Fix up cpp23/auto-fncast11.C testcase [PR103408]

This test fails:
+FAIL: g++.dg/cpp23/auto-fncast11.C  -std=c++2b  (test for errors, line 19)
+FAIL: g++.dg/cpp23/auto-fncast11.C  -std=c++2b (test for excess errors)
because the regex in dg-error was missing an indefinite article.

2021-12-15  Jakub Jelinek  <jakub@redhat.com>

PR c++/103408
* g++.dg/cpp23/auto-fncast11.C: Fix expected diagnostic wording.

dwarf2cfi: Improve cfa_reg comparisons [PR103619]

On Tue, Dec 14, 2021 at 10:32:21AM -0700, Jeff Law wrote:
> I think the attached testcase should trigger on c6x with -mbig-endian -O2 -g

Thanks.  Finally I see what's going on.  c6x doesn't really need the CFA
with span > 1 (and I bet neither does armbe), the only reason why
dwf_cfa_reg is called is that the code in 13 cases just tries to compare
the CFA against dwf_cfa_reg (some_reg).  And that dwf_cfa_reg on some reg
that usually isn't a CFA reg results in targetm.dwarf_register_span hook
call, which on targets like c6x or armeb and others for some registers
creates a PARALLEL with various REGs in it, then the loop with the assertion
and finally operator== which just notes that the reg is different and fails.

This seems compile time memory and time inefficient.

The following so far untested patch instead adds an extra operator== and !=
for comparison of cfa_reg with rtx, which has the most common case where it
is a different register number done early without actually invoking
dwf_cfa_reg.  This means the assertion in dwf_cfa_reg can stay as is (at
least until some big endian target needs to have hard frame pointer or stack
pointer with span > 1 as well).
I've removed a different assertion there because it is redundant - dwf_regno
already has exactly that assertion in it too.

And I've included those 2 tweaks to avoid creating a REG in GC memory when
we can use {stack,hard_frame}_pointer_rtx which is already initialized to
the same REG we need by init_emit_regs.

On Tue, Dec 14, 2021 at 03:05:37PM -0700, Jeff Law wrote:
> So if someone is unfamiliar with the underlying issues here and needs to
> twiddle dwarf2cfi, how are they supposed to know if they should compare
> directly or use dwf_cfa_reg?

Comparison without dwf_cfa_reg should be used whenever possible, because
for registers which are never CFA related that won't call
targetm.dwarf_register_span uselessly.

The only comparisons with dwf_cfa_reg I've kept are the:
            regno = dwf_cfa_reg (XEXP (XEXP (dest, 0), 0));

            if (cur_cfa->reg == regno)
              offset -= cur_cfa->offset;
            else if (cur_trace->cfa_store.reg == regno)
              offset -= cur_trace->cfa_store.offset;
            else
              {
                gcc_assert (cur_trace->cfa_temp.reg == regno);
                offset -= cur_trace->cfa_temp.offset;
              }
and
            struct cfa_reg regno = dwf_cfa_reg (XEXP (dest, 0));

            if (cur_cfa->reg == regno)
              offset = -cur_cfa->offset;
            else if (cur_trace->cfa_store.reg == regno)
              offset = -cur_trace->cfa_store.offset;
            else
              {
                gcc_assert (cur_trace->cfa_temp.reg == regno);
                offset = -cur_trace->cfa_temp.offset;
              }
and there are 2 reasons for it:
1) there is an assertion, which guarantees it must compare equal to one of
those 3 cfa related struct cfa_reg structs, so it must be some CFA related
register (so, right now, targetm.dwarf_register_span shouldn't return
non-NULL in those on anything but gcn)
2) it is compared 3 times in a row, so for the GCN case doing
            if (cur_cfa->reg == XEXP (XEXP (dest, 0), 0))
              offset -= cur_cfa->offset;
            else if (cur_trace->cfa_store.reg == XEXP (XEXP (dest, 0), 0))
              offset -= cur_trace->cfa_store.offset;
            else
              {
                gcc_assert (cur_trace->cfa_temp.reg == XEXP (XEXP (dest, 0), 0));
                offset -= cur_trace->cfa_temp.offset;
              }
could actually create more GC allocated garbage than the way it is written
now.  But doing it that way would work fine.

I think for most of the comparisons even comparing with dwf_cfa_reg would
work but be less compile time/memory efficient (e.g. those assertions that
it is equal to some CFA related cfa_reg or in any spots where only the CFA
related regs may appear in the frame related patterns).

I'm aware just of a single spot where comparison with dwf_cfa_reg doesn't
work (when the assert is in dwf_cfa_reg), that is the spot that was ICEing
on your testcase, where we save arbitrary call saved register:
      if (REG_P (src)
          && REGNO (src) != STACK_POINTER_REGNUM
          && REGNO (src) != HARD_FRAME_POINTER_REGNUM
          && cur_cfa->reg == src)

2021-12-15  Jakub Jelinek  <jakub@redhat.com>

PR debug/103619
* dwarf2cfi.c (dwf_cfa_reg): Remove gcc_assert.
(operator==, operator!=): New overloaded operators.
(dwarf2out_frame_debug_adjust_cfa, dwarf2out_frame_debug_cfa_offset,
dwarf2out_frame_debug_expr): Compare vars with cfa_reg type directly
with REG rtxes rather than with dwf_cfa_reg results on those REGs.
(create_cie_data): Use stack_pointer_rtx instead of
gen_rtx_REG (Pmode, STACK_POINTER_REGNUM).
(execute_dwarf2_frame): Use hard_frame_pointer_rtx instead of
gen_rtx_REG (Pmode, HARD_FRAME_POINTER_REGNUM).

i386: Fix emissing of __builtin_cpu_supports.

PR target/103661

gcc/ChangeLog:

* config/i386/i386-builtins.c (fold_builtin_cpu): Compare to 0
as API expects that non-zero values are returned (do that
it mask == 31).
For "avx512vbmi2" argument, we return now 1 << 31, which is a
negative integer value.

openmp: Avoid calling operand_equal_p on OMP_CLAUSEs [PR103704]

On OMP_CLAUSEs we reuse TREE_TYPE as CP_OMP_CLAUSE_INFO in the C++ FE.
This confuses the hashing code that operand_equal_p does when checking.
There is really no reason to compare OMP_CLAUSEs against expressions
like captured this, they will never compare equal.

2021-12-15  Jakub Jelinek  <jakub@redhat.com>

PR c++/103704
* semantics.c (finish_omp_target_clauses_r): For OMP_CLAUSEs
just walk subtrees.

* g++.dg/gomp/pr103704.C: New test.

libstdc++: Poor man's case insensitive comparisons in time_get [PR71557]

This patch uses the same not completely correct case insensitive comparisons
as used elsewhere in the same header.  Proper comparisons that would handle
even multi-byte characters would be harder, but I don't see them implemented
in __ctype's methods.

2021-12-15  Jakub Jelinek  <jakub@redhat.com>

PR libstdc++/71557
* include/bits/locale_facets_nonio.tcc (_M_extract_via_format):
Compare characters other than format specifiers and whitespace
case insensitively.
(_M_extract_name): Compare characters case insensitively.
* testsuite/22_locale/time_get/get/char/71557.cc: New test.
* testsuite/22_locale/time_get/get/wchar_t/71557.cc: New test.

Add combine splitter to transform vashr/vlshr/vashl_optab to ashr/lshr/ashl_optab for const vector duplicate operand.

gcc/ChangeLog:

PR target/101796
* config/i386/predicates.md (const_vector_operand):
Add new predicate.
* config/i386/sse.md(<insn><mode>3<mask_name>):
Add new define_split below.

gcc/testsuite/ChangeLog:

PR target/101796
* gcc.target/i386/pr101796-1.c: New test.

Generate XXSPLTIDP for scalars on power10.

This patch implements XXSPLTIDP support for SF, and DF scalar constants.
The previous patch added support for vector constants.  This patch adds
the support for SFmode and DFmode scalar constants.

I added 2 new tests to test loading up SF and DF scalar constants.

2021-12-15  Michael Meissner  <meissner@the-meissners.org>

gcc/

* config/rs6000/rs6000.md (UNSPEC_XXSPLTIDP_CONST): New unspec.
(UNSPEC_XXSPLTIW_CONST): New unspec.
(movsf_hardfloat): Add support for generating XXSPLTIDP.
(mov<mode>_hardfloat32): Likewise.
(mov<mode>_hardfloat64): Likewise.
(xxspltidp_<mode>_internal): New insns.
(xxspltiw_<mode>_internal): New insns.
(splitters for SF/DFmode): Add new splitters for XXSPLTIDP.

gcc/testsuite/

* gcc.target/powerpc/vec-splat-constant-df.c: New test.
* gcc.target/powerpc/vec-splat-constant-sf.c: New test.

Generate XXSPLTIDP for vectors on power10.

This patch implements XXSPLTIDP support for all vector constants.  The
XXSPLTIDP instruction is given a 32-bit immediate that is converted to a vector
of two DFmode constants.  The immediate is in SFmode format, so only constants
that fit as SFmode values can be loaded with XXSPLTIDP.

The constraint (eP) added in the previous patch for XXSPLTIW is also used
for XXSPLTIDP.

DImode scalar constants are not handled.  This is due to the majority of DImode
constants will be in the GPR registers.  With vector registers, you have the
problem that XXSPLTIDP splats the double word into both elements of the
vector.  However, if TImode is loaded with an integer constant, it wants a full
128-bit constant.

SFmode and DFmode scalar constants are not handled in this patch.  The
support for for those constants will be in the next patch.

I have added a temporary switch (-msplat-float-constant) to control whether or
not the XXSPLTIDP instruction is generated.

I added 2 new tests to test loading up V2DI and V2DF vector constants.

2021-12-14  Michael Meissner  <meissner@the-meissners.org>

gcc/

* config/rs6000/predicates.md (easy_fp_constant): Add support for
generating XXSPLTIDP.
(vsx_prefixed_constant): Likewise.
(easy_vector_constant): Likewise.
* config/rs6000/rs6000-protos.h (constant_generates_xxspltidp):
New declaration.
* config/rs6000/rs6000.c (output_vec_const_move): Add support for
generating XXSPLTIDP.
(prefixed_xxsplti_p): Likewise.
(constant_generates_xxspltidp): New function.
* config/rs6000/rs6000.opt (-msplat-float-constant): New debug option.

gcc/testsuite/

* gcc.target/powerpc/pr86731-fwrapv-longlong.c: Update insn
regex for power10.
* gcc.target/powerpc/vec-splat-constant-v2df.c: New test.
* gcc.target/powerpc/vec-splat-constant-v2di.c: New test.

Generate XXSPLTIW on power10.

This patch adds support to automatically generate the ISA 3.1 XXSPLTIW
instruction for V8HImode, V4SImode, and V4SFmode vectors.  It does this by
adding support for vector constants that can be used, and adding a
VEC_DUPLICATE pattern to generate the actual XXSPLTIW instruction.

Add the eP constraint to recognize constants that can be loaded into
vector registers with a single prefixed instruction such as xxspltiw and
xxspltidp.

I added 4 new tests to test loading up V16QI, V8HI, V4SI, and V4SF vector
constants.

2021-12-14  Michael Meissner  <meissner@linux.ibm.com>

gcc/

* config/rs6000/constraints.md (eP): Update comment.
* config/rs6000/predicates.md (easy_fp_constant): Add support for
generating XXSPLTIW.
(vsx_prefixed_constant): New predicate.
(easy_vector_constant): Add support for
generating XXSPLTIW.
* config/rs6000/rs6000-protos.h (prefixed_xxsplti_p): New
declaration.
(constant_generates_xxspltiw): Likewise.
* config/rs6000/rs6000.c (xxspltib_constant_p): Generate XXSPLTIW
if possible instead of XXSPLTIB and sign extending the constant.
(output_vec_const_move): Add support for XXSPLTIW.
(prefixed_xxsplti_p): New function.
(constant_generates_xxspltiw): New function.
* config/rs6000/rs6000.md (prefixed attribute): Add support to
mark XXSPLTI* instructions as being prefixed.
* config/rs6000/rs6000.opt (-msplat-word-constant): New debug
switch.
* config/rs6000/vsx.md (vsx_mov<mode>_64bit): Add support for
generating XXSPLTIW or XXSPLTIDP.
(vsx_mov<mode>_32bit): Likewise.
* doc/md.texi (PowerPC and IBM RS6000 constraints): Document the
eP constraint.

gcc/testsuite/

* gcc.target/powerpc/vec-splat-constant-v16qi.c: New test.
* gcc.target/powerpc/vec-splat-constant-v4sf.c: New test.
* gcc.target/powerpc/vec-splat-constant-v4si.c: New test.
* gcc.target/powerpc/vec-splat-constant-v8hi.c: New test.
* gcc.target/powerpc/vec-splati-runnable.c: Update insn count.

Add LXVKQ support.

This patch adds support to generate the LXVKQ instruction to load specific
IEEE-128 floating point constants.

Compared to the last time I submitted this patch, I modified it so that it
uses the bit pattern of the vector to see if it can generate the LXVKQ
instruction.  This means on a little endian Power<xxx> system, the
following code will generate a LXVKQ 34,16 instruction:

    vector long long foo (void)
    {
      return (vector long long) { 0x0000000000000000, 0x8000000000000000 };
    }

because that vector pattern is the same bit pattern as -0.0F128.

2021-12-14  Michael Meissner  <meissner@the-meissners.org>

gcc/

* config/rs6000/constraints.md (eQ): New constraint.
* config/rs6000/predicates.md (easy_fp_constant): Add support for
generating the LXVKQ instruction.
(easy_vector_constant_ieee128): New predicate.
(easy_vector_constant): Add support for generating the LXVKQ
instruction.
* config/rs6000/rs6000-protos.h (constant_generates_lxvkq): New
declaration.
* config/rs6000/rs6000.c (output_vec_const_move): Add support for
generating LXVKQ.
(constant_generates_lxvkq): New function.
* config/rs6000/rs6000.opt (-mieee128-constant): New debug
option.
* config/rs6000/vsx.md (vsx_mov<mode>_64bit): Add support for
generating LXVKQ.
(vsx_mov<mode>_32bit): Likewise.
* doc/md.texi (PowerPC and IBM RS6000 constraints): Document the
eQ constraint.

gcc/testsuite/

* gcc.target/powerpc/float128-constant.c: New test.

Add new constant data structure.

This patch provides the data structure and function to convert a
CONST_INT, CONST_DOUBLE, CONST_VECTOR, or VEC_DUPLICATE of a constant) to
an array of bytes, half-words, words, and  double words that can be loaded
into a 128-bit vector register.

The next patches will use this data structure to generate code that
generates load of the vector/floating point registers using the XXSPLTIDP,
XXSPLTIW, and LXVKQ instructions that were added in power10.

2021-12-15  Michael Meissner  <meissner@the-meissners.org>

gcc/

* config/rs6000/rs6000-protos.h (VECTOR_128BIT_BITS): New macro.
(VECTOR_128BIT_BYTES): Likewise.
(VECTOR_128BIT_HALF_WORDS): Likewise.
(VECTOR_128BIT_WORDS): Likewise.
(VECTOR_128BIT_DOUBLE_WORDS): Likewise.
(vec_const_128bit_type): New structure type.
(vec_const_128bit_to_bytes): New declaration.
* config/rs6000/rs6000.c (constant_int_to_128bit_vector): New
helper function.
(constant_fp_to_128bit_vector): New helper function.
(vec_const_128bit_to_bytes): New function.

[PR100518] store by mult pieces: keep addr in Pmode

The conversion of a MEM address to ptr_mode in
try_store_by_multiple_pieces was misguided: copy_addr_to_reg expects
Pmode for addresses.

for  gcc/ChangeLog

PR target/100518
* builtins.c (try_store_by_multiple_pieces): Drop address
conversion to ptr_mode.

for  gcc/testsuite/ChangeLog

PR target/100518
* gcc.target/aarch64/pr100518.c: New.

[PR100843] store by mult pieces: punt on max_len < min_len

The testcase confuses the code that detects min and max len for the
memset, so max_len ends up less than min_len.  That shouldn't be
possible, but the testcase requires us to handle this case.

The store-by-mult-pieces algorithm actually relies on min and max
lengths, so if we find them to be inconsistent, the best we can do is
punting.

for  gcc/ChangeLog

PR middle-end/100843
* builtins.c (try_store_by_multiple_pieces): Fail if min_len
is greater than max_len.

for  gcc/testsuite/ChangeLog

PR middle-end/100843
* gcc.dg/pr100843.c: New.

Daily bump.

Fix ICE. [PR103682]

Check is_gimple_assign before gimple_assign_rhs_code.

gcc/ChangeLog:

PR target/103682
* tree-ssa-ccp.c (optimize_atomic_bit_test_and): Check
is_gimple_assign before gimple_assign_rhs_code.

gcc/testsuite/ChangeLog:

* gcc.c-torture/compile/pr103682.c: New test.

libstdc++: Support old and new T_FMT for en_HK locale [PR103687]

This checks whether the locale data for en_HK includes %p and adjusts
the string being tested accordingly. To account for Jakub's fix to make
%I parse "12" as 0 instead of 12, we need to change the expected value
for the case where the locale format doesn't include %p. Also change the
time from 12:00:00 to 12:02:01 so we can tell if the minutes and seconds
get mixed up.

libstdc++-v3/ChangeLog:

PR libstdc++/103687
* testsuite/22_locale/time_get/get_date/wchar_t/4.cc: Restore
original locale before returning.
* testsuite/22_locale/time_get/get_time/char/2.cc: Check for %p
in locale's T_FMT and adjust accordingly.
* testsuite/22_locale/time_get/get_time/wchar_t/2.cc: Likewise.

[PATCH] stddef.h: add support for musl typedef macro guards

The stddef.h header checks/sets various hardcoded toolchain/os specific
macro guards to prevent redefining types such as ptrdiff_t, wchar_t, or
size_t. However, without this patch, the file does not check/set the
typedef macro guards for musl libc. This causes types such as size_t to
be defined twice for files which include both musl's stdlib.h as well as
GCC's ginclude/stddef.h. This is, for example, the case for
libgo/sysinfo.c. If libgo/sysinfo.c has multiple typedefs for size_t
this confuses -fdump-go-spec and causes size_t not to be included in the
generated type definitions thereby causing a gcc-go compilation failure
on Alpine Linux Edge (which uses musl libc) with the following error:

sysinfo.go:7765:13: error: use of undefined type '_size_t'
 7765 | type Size_t _size_t
      |             ^
libcall_posix.go:49:35: error: non-integer len argument in make
   49 |                 b := make([]byte, len)
      |

This commit fixes this issue by ensuring that ptrdiff_t, wchar_t, and size_t
are only defined once in the pre-processed libgo/sysinfo.c file by enhancing
gcc/ginclude/stddef.h with musl-specific typedef macro guards.

gcc/ChangeLog:

* ginclude/stddef.h (__DEFINED_ptrdiff_t): Add support for musl
libc typedef macro guard.
(__DEFINED_size_t): Ditto.
(__DEFINED_wchar_t): Ditto.

regrename: Skip renaming if instruction is noop move.

gcc/
* regrename.c (find_rename_reg): Return satisfied regno
if instruction is noop move.

libstdc++: Fix handling of invalid ranges in std::regex [PR102447]

std::regex currently allows invalid bracket ranges such as [\w-a] which
are only allowed by ECMAScript when in web browser compatibility mode.
It should be an error, because the start of the range is a character
class, not a single character. The current implementation of
_Compiler::_M_expression_term does not provide a way to reject this,
because we only remember a previous character, not whether we just
processed a character class (or collating symbol etc.)

This patch replaces the pair<bool, CharT> used to emulate
optional<CharT> with a custom class closer to pair<tribool,CharT>. That
allows us to track three states, so that we can tell when we've just
seen a character class.

With this additional state the code in _M_expression_term for processing
the _S_token_bracket_dash can be improved to correctly reject the [\w-a]
case, without regressing for valid cases such as [\w-] and [----].

libstdc++-v3/ChangeLog:

PR libstdc++/102447
* include/bits/regex_compiler.h (_Compiler::_BracketState): New
class.
(_Compiler::_BrackeyMatcher): New alias template.
(_Compiler::_M_expression_term): Change pair<bool, CharT>
parameter to _BracketState. Process first character for
ECMAScript syntax as well as POSIX.
* include/bits/regex_compiler.tcc
(_Compiler::_M_insert_bracket_matcher): Pass _BracketState.
(_Compiler::_M_expression_term): Use _BracketState to store
state between calls. Improve handling of dashes in ranges.
* testsuite/28_regex/algorithms/regex_match/cstring_bracket_01.cc:
Add more tests for ranges containing dashes. Check invalid
ranges with character class at the beginning.

libstdc++: Simplify typedefs by using __UINTPTR_TYPE__

libstdc++-v3/ChangeLog:

* include/ext/pointer.h (_Relative_pointer_impl::_UIntPtrType):
Rename to uintptr_t and define as __UINTPTR_TYPE__.

libstdc++: Simplify definition of std::regex_constants variables

This removes the __syntax_option and __match_flag enumeration types,
which are only used to define enumerators with successive values that
are then used to initialize the std::regex_constants global variables.

By defining enumerators in the syntax_option_type and match_flag_type
enumeration types with the correct values for the globals we get rid of
two useless enumeration types that just count from 0 to N, and we
improve the debugging experience. Because the enumeration types now have
enumerators defined, GDB will print values in terms of those enumerators
e.g.

$6 = (std::regex_constants::_S_ECMAScript | std::regex_constants::_S_multiline)

Previously this would have been shown as simply 0x810 because there were
no enumerators of that type.

This changes the type and value of enumerators such as _S_grep, but
users should never be referring to them directly anyway.

libstdc++-v3/ChangeLog:

* include/bits/regex_constants.h (__syntax_option, __match_flag):
Remove.
(syntax_option_type, match_flag_type): Define enumerators.
Use to initialize globals. Add constexpr to compound assignment
operators.
* include/bits/regex_error.h (error_type): Add comment.
* testsuite/28_regex/constants/constexpr.cc: Remove comment.
* testsuite/28_regex/constants/error_type.cc: Improve comment.
* testsuite/28_regex/constants/match_flag_type.cc: Check bitmask
requirements.
* testsuite/28_regex/constants/syntax_option_type.cc: Likewise.

rs6000: Rename arrays to remove temporary _x suffix

While we had two sets of built-in infrastructure at once, I added _x as a
suffix to two arrays to disambiguate the old and new versions.  Time to fix
that also.

2021-12-06  Bill Schmidt  <wschmidt@linux.ibm.com>

gcc/
* config/rs6000/rs6000-c.c (altivec_build_resolved_builtin): Rename
rs6000_builtin_decls_x to rs6000_builtin_decls.
(altivec_resolve_overloaded_builtin): Likewise.  Also rename
rs6000_builtin_info_x to rs6000_builtin_info.
* config/rs6000/rs6000-call.c (rs6000_invalid_builtin): Rename
rs6000_builtin_info_x to rs6000_builtin_info.
(rs6000_builtin_is_supported): Likewise.
(rs6000_gimple_fold_mma_builtin): Likewise.  Also rename
rs6000_builtin_decls_x to rs6000_builtin_decls.
(rs6000_gimple_fold_builtin): Rename rs6000_builtin_info_x to
rs6000_builtin_info.
(cpu_expand_builtin): Likewise.
(rs6000_expand_builtin): Likewise.
(rs6000_init_builtins): Likewise.  Also rename rs6000_builtin_decls_x
to rs6000_builtin_decls.
(rs6000_builtin_decl): Rename rs6000_builtin_decls_x to
rs6000_builtin_decls.
* config/rs6000/rs6000-gen-builtins.c (write_decls): In generated code,
rename rs6000_builtin_decls_x to rs6000_builtin_decls, and rename
rs6000_builtin_info_x to rs6000_builtin_info.
(write_bif_static_init): In generated code, rename
rs6000_builtin_info_x to rs6000_builtin_info.
(write_init_bif_table): In generated code, rename
rs6000_builtin_decls_x to rs6000_builtin_decls, and rename
rs6000_builtin_info_x to rs6000_builtin_info.
(write_init_ovld_table): In generated code, rename
rs6000_builtin_decls_x to rs6000_builtin_decls.
(write_init_file): Likewise.
* config/rs6000/rs6000.c (rs6000_builtin_vectorized_function):
Likewise.
(rs6000_builtin_md_vectorized_function): Likewise.
(rs6000_builtin_reciprocal): Likewise.
(add_condition_to_bb): Likewise.
(rs6000_atomic_assign_expand_fenv): Likewise.

rs6000: Rename functions with "new" in their names

While we had two sets of built-in functionality at the same time, I put "new"
in the names of quite a few functions.  Time to undo that.

2021-12-02  Bill Schmidt  <wschmidt@linux.ibm.com>

gcc/
* config/rs6000/rs6000-c.c (altivec_resolve_new_overloaded_builtin):
Remove forward declaration.
(rs6000_new_builtin_type_compatible): Rename to
rs6000_builtin_type_compatible.
(rs6000_builtin_type_compatible): Remove.
(altivec_resolve_overloaded_builtin): Remove.
(altivec_build_new_resolved_builtin): Rename to
altivec_build_resolved_builtin.
(altivec_resolve_new_overloaded_builtin): Rename to
altivec_resolve_overloaded_builtin.  Remove static keyword.  Adjust
called function names.
* config/rs6000/rs6000-call.c (rs6000_expand_new_builtin): Remove
forward declaration.
(rs6000_gimple_fold_new_builtin): Likewise.
(rs6000_invalid_new_builtin): Rename to rs6000_invalid_builtin.
(rs6000_gimple_fold_builtin): Remove.
(rs6000_new_builtin_valid_without_lhs): Rename to
rs6000_builtin_valid_without_lhs.
(rs6000_new_builtin_is_supported): Rename to
rs6000_builtin_is_supported.
(rs6000_gimple_fold_new_mma_builtin): Rename to
rs6000_gimple_fold_mma_builtin.
(rs6000_gimple_fold_new_builtin): Rename to
rs6000_gimple_fold_builtin.  Remove static keyword.  Adjust called
function names.
(rs6000_expand_builtin): Remove.
(new_cpu_expand_builtin): Rename to cpu_expand_builtin.
(new_mma_expand_builtin): Rename to mma_expand_builtin.
(new_htm_spr_num): Rename to htm_spr_num.
(new_htm_expand_builtin): Rename to htm_expand_builtin.  Change name
of called function.
(rs6000_expand_new_builtin): Rename to rs6000_expand_builtin.  Remove
static keyword.  Adjust called function names.
(rs6000_new_builtin_decl): Rename to rs6000_builtin_decl.  Remove
static keyword.
(rs6000_builtin_decl): Remove.
* config/rs6000/rs6000-gen-builtins.c (write_decls): In gnerated code,
rename rs6000_new_builtin_is_supported to rs6000_builtin_is_supported.
* config/rs6000/rs6000-internal.h (rs6000_invalid_new_builtin): Rename
to rs6000_invalid_builtin.
* config/rs6000/rs6000.c (rs6000_new_builtin_vectorized_function):
Rename to rs6000_builtin_vectorized_function.
(rs6000_new_builtin_md_vectorized_function): Rename to
rs6000_builtin_md_vectorized_function.
(rs6000_builtin_vectorized_function): Remove.
(rs6000_builtin_md_vectorized_function): Remove.

rs6000: Remove rs6000-builtin.def and associated data and functions

2021-12-02  Bill Schmidt  <wschmidt@linux.ibm.com>

gcc/
* config/rs6000/rs6000-builtin.def: Delete.
* config/rs6000/rs6000-call.c (builtin_compatibility): Delete.
(builtin_description): Delete.
(builtin_hash_struct): Delete.
(builtin_hasher): Delete.
(builtin_hash_table): Delete.
(builtin_hasher::hash): Delete.
(builtin_hasher::equal): Delete.
(rs6000_builtin_info_type): Delete.
(rs6000_builtin_info): Delete.
(bdesc_compat): Delete.
(bdesc_3arg): Delete.
(bdesc_4arg): Delete.
(bdesc_dst): Delete.
(bdesc_2arg): Delete.
(bdesc_altivec_preds): Delete.
(bdesc_abs): Delete.
(bdesc_1arg): Delete.
(bdesc_0arg): Delete.
(bdesc_htm): Delete.
(bdesc_mma): Delete.
(rs6000_overloaded_builtin_p): Delete.
(rs6000_overloaded_builtin_name): Delete.
(htm_spr_num): Delete.
(rs6000_builtin_is_supported_p): Delete.
(rs6000_gimple_fold_mma_builtin): Delete.
(gt-rs6000-call.h): Remove include directive.
* config/rs6000/rs6000-protos.h (rs6000_overloaded_builtin_p): Delete.
(rs6000_builtin_is_supported_p): Delete.
(rs6000_overloaded_builtin_name): Delete.
* config/rs6000/rs6000.c (rs6000_builtin_decls): Delete.
(rs6000_debug_reg_global): Remove reference to RS6000_BUILTIN_COUNT.
* config/rs6000/rs6000.h (rs6000_builtins): Delete.
(altivec_builtin_types): Delete.
(rs6000_builtin_decls): Delete.
* config/rs6000/t-rs6000 (TM_H): Don't add rs6000-builtin.def.

rs6000: Rename rs6000-builtin-new.def to rs6000-builtins.def

2021-12-02  Bill Schmidt  <wschmidt@linux.ibm.com>

gcc/
* config/rs6000/rs6000-builtin-new.def: Rename to...
* config/rs6000/rs6000-builtins.def: ...this.
* config/rs6000/rs6000-gen-builtins.c: Adjust header commentary.
* config/rs6000/t-rs6000 (EXTRA_GTYPE_DEPS): Rename
rs6000-builtin-new.def to rs6000-builtins.def.
(rs6000-builtins.c): Likewise.

rs6000: Remove altivec_overloaded_builtins array and initialization

2021-12-06  Bill Schmidt  <wschmidt@linux.ibm.com>

gcc/
* config/rs6000/rs6000-call.c (altivec_overloaded_builtins): Remove.
* config/rs6000/rs6000.h (altivec_overloaded_builtins): Remove.

rs6000: Do not allow combining of multiple assemble quads [PR103548]

The compiler will gladly CSE the result of two __builtin_mma_build_acc
calls with the same four vector arguments, leading to illegal MMA
code being generated.  The fix here is to make the mma_assemble_acc
pattern use a unspec_volatile to stop the CSE from happening.

2021-12-14  Peter Bergner  <bergner@linux.ibm.com>

gcc/
PR target/103548
* config/rs6000/mma.md (UNSPEC_MMA_ASSEMBLE): Rename unspec from this...
(UNSPEC_VSX_ASSEMBLE): ...to this.
(UNSPECV_MMA_ASSEMBLE): New unspecv.
(vsx_assemble_pair): Use UNSPEC_VSX_ASSEMBLE.
(*vsx_assemble_pair): Likewise.
(mma_assemble_acc): Use UNSPECV_MMA_ASSEMBLE.
(*mma_assemble_acc): Likewise.
* config/rs6000/rs6000.c (rs6000_split_multireg_move): Handle
UNSPEC_VOLATILE.  Use UNSPEC_VSX_ASSEMBLE and UNSPECV_MMA_ASSEMBLE.

gcc/testsuite/
PR target/103548
* gcc.target/powerpc/mma-builtin-10-pair.c: New test.
* gcc.target/powerpc/mma-builtin-10-quad.c: New test.

Fortran: prevent NULL pointer dereference in check of passed do-loop variable

gcc/fortran/ChangeLog:

PR fortran/103717
* frontend-passes.c (doloop_code): Prevent NULL pointer
dereference when checking for passing a do-loop variable to a
contained procedure with an interface mismatch.

gcc/testsuite/ChangeLog:

PR fortran/103717
* gfortran.dg/do_check_19.f90: New test.

Fortran: prevent NULL pointer dereferences checking do-loop contained stuff

gcc/fortran/ChangeLog:

PR fortran/103718
PR fortran/103719
* frontend-passes.c (doloop_contained_procedure_code): Add several
checks to prevent NULL pointer dereferences on valid and invalid
code called within do-loops.

gcc/testsuite/ChangeLog:

PR fortran/103718
PR fortran/103719
* gfortran.dg/do_check_18.f90: New test.

i386: Implement VxHF vector set/insert/extract with lower ABI levels

This is a preparation patch that moves VxHF vector set/insert/extract
expansions from AVX512FP16 ABI to lower ABIs.  There are no functional
changes for -mavx512fp16 and a follow-up patch is needed to actually
enable VxHF vector modes for lower ABIs.

2021-12-14  Uroš Bizjak  <ubizjak@gmail.com>

gcc/ChangeLog:

PR target/103571
* config/i386/i386-expand.c (ix86_expand_vector_init_duplicate)
<case E_V8HFmode>: Implement for TARGET_SSE2.
<case E_V16HFmode>: Implement for TARGET_AVX.
<case E_V32HFmode>: Implement for TARGET_AVX512F.
(ix86_expand_vector_set_var): Handle V32HFmode
without TARGET_AVX512BW.
(ix86_expand_vector_extract)
<case E_V8HFmode>: Implement for TARGET_SSE2.
<case E_V16HFmode>: Implement for TARGET_AVX.
<case E_V32HFmode>: Implement for TARGET_AVX512BW.
(expand_vec_perm_broadcast_1) <case E_V8HFmode>: New.
* config/i386/sse.md (VI12HF_AVX512VL): Remove
TARGET_AVX512FP16 condition.
(V): Ditto.
(V_256_512): Ditto.
(avx_vbroadcastf128_<mode>): Use V_256H mode iterator.

rs6000: Remove new_builtins_are_live and dead code it was guarding

To allow for a sane switch-over from the old built-in infrastructure to the
new, both sets of code have co-existed, with the enabled one under the control
of the boolean variable new_builtins_are_live.  As a first step in removing the
old code, remove this variable and the now-dead code it was guarding.

2021-12-06  Bill Schmidt  <wschmidt@linux.ibm.com>

gcc/
* config/rs6000/darwin.h (SUBTARGET_INIT_BUILTINS): Remove
test for new_builtins_are_live and simplify.
* config/rs6000/rs6000-c.c (altivec_build_resolved_builtin): Remove
dead function.
(altivec_resolve_overloaded_builtin): Remove test for
new_builtins_are_live and simplify.
* config/rs6000/rs6000-call.c (altivec_init_builtins): Remove forward
declaration.
(builtin_function_type): Likewise.
(rs6000_common_init_builtins): Likewise.
(htm_init_builtins): Likewise.
(mma_init_builtins): Likewise.
(def_builtin): Remove dead function.
(rs6000_expand_zeroop_builtin): Likewise.
(rs6000_expand_mtfsf_builtin): Likewise.
(rs6000_expand_mtfsb_builtin): Likewise.
(rs6000_expand_set_fpscr_rn_builtin): Likewise.
(rs6000_expand_set_fpscr_drn_builtin): Likewise.
(rs6000_expand_unop_builtin): Likewise.
(altivec_expand_abs_builtin): Likewise.
(rs6000_expand_binop_builtin): Likewise.
(altivec_expand_lxvr_builtin): Likewise.
(altivec_expand_lv_builtin): Likewise.
(altivec_expand_stxvl_builtin): Likewise.
(altivec_expand_stv_builtin): Likewise.
(mma_expand_builtin): Likewise.
(htm_expand_builtin): Likewise.
(cpu_expand_builtin): Likewise.
(rs6000_expand_quaternop_builtin): Likewise.
(rs6000_expand_ternop_builtin): Likewise.
(altivec_expand_dst_builtin): Likewise.
(altivec_expand_vec_sel_builtin): Likewise.
(altivec_expand_builtin): Likewise.
(rs6000_invalid_builtin): Likewise.
(rs6000_builtin_valid_without_lhs): Likewise.
(rs6000_gimple_fold_builtin): Remove test for new_builtins_are_live and
simplify.
(rs6000_expand_builtin): Likewise.
(rs6000_init_builtins): Remove tests for new_builtins_are_live and
simplify.
(rs6000_builtin_decl): Likewise.
(altivec_init_builtins): Remove dead function.
(mma_init_builtins): Likewise.
(htm_init_builtins): Likewise.
(builtin_quaternary_function_type): Likewise.
(builtin_function_type): Likewise.
(rs6000_common_init_builtins): Likewise.
* config/rs6000/rs6000-gen-builtins.c (write_header_file): Don't
declare new_builtins_are_live.
(write_init_bif_table): In generated code, remove test for
new_builtins_are_live and simplify.
(write_init_ovld_table): Likewise.
(write_init_file): Don't initialize new_builtins_are_live.
* config/rs6000/rs6000.c (rs6000_builtin_vectorized_function): Remove
test for new_builtins_are_live and simplify.
(rs6000_builtin_md_vectorized_function): Likewise.
(rs6000_builtin_reciprocal): Likewise.
(add_condition_to_bb): Likewise.
(rs6000_atomic_assign_expand_fenv): Likewise.

rs6000: Builtins for doubleword compare should be in [power8-vector] (PR103625)

2021-12-13  Bill Schmidt  <wschmidt@linux.ibm.com>

gcc/
PR target/103625
* config/rs6000/rs6000-builtin-new.def (__builtin_altivec_vcmpequd):
Move to power8-vector stanza.
(__builtin_altivec_vcmpequd_p): Likewise.
(__builtin_altivec_vcmpgtsd): Likewise.
(__builtin_altivec_vcmpgtsd_p): Likewise.
(__builtin_altivec_vcmpgtud): Likewise.
(__builtin_altivec_vcmpgtud_p): Likewise.

rs6000: Some builtins require IBM-128 long double format (PR103623)

2021-12-14  Bill Schmidt  <wschmidt@linux.ibm.com>

gcc/
PR target/103623
* config/rs6000/rs6000-builtin-new.def (__builtin_pack_longdouble): Add
ibmld attribute.
(__builtin_unpack_longdouble): Likewise.
* config/rs6000/rs6000-call.c (rs6000_expand_new_builtin): Add special
handling for ibmld attribute.
* config/rs6000/rs6000-gen-builtins.c (attrinfo): Add isibmld.
(parse_bif_attrs): Handle ibmld.
(write_decls): Likewise.
(write_bif_static_init): Likewise.

Add support for global rvalue initialization and constructors

This patch adds support for initialization of global variables
with rvalues and creating constructors for array, struct and
union types which can be used as rvalues.

Signed-off-by:
2021-12-14 Petter Tomner <tomner@kth.se>

gcc/jit/
* jit-common.h: New enum
* jit-playback.c : Folding an setting intitial
(global_new_decl) : Handle const global generation
(new_global) : New flag
(global_set_init_rvalue) : New
(new_ctor) : New
(new_global_initialized) : Flag
(as_truth_value) : Fold
(new_unary_op) : Fold
(new_binary_op) : Fold
(new_comparison) : Fold
(new_array_access) : Fold
(new_dereference) : Fold
(get_address) : Fold
* jit-playback.h :
(global_set_init_rvalue) : New
(new_ctor) : New
* jit-recording.c :
* jit-recording.h :
(new_global_init_rvalue) : New
(new_ctor) : New
(ctor) : New, inherits rvalue
(global_init_rvalue) : New, inherits memento
(type::is_union) : New
* libgccjit++.h : New entrypoints, see C-header
* libgccjit.c : See .h
* libgccjit.h : New entrypoints
(gcc_jit_context_new_array_constructor) : New
(gcc_jit_context_new_struct_constructor) : New
(gcc_jit_context_new_union_constructor) : New
(gcc_jit_global_set_initializer_rvalue) : New
(LIBGCCJIT_HAVE_CTORS) : New feuture macro
* libgccjit.map : New entrypoints added to ABI 19
* docs/topics/expressions.rst : Updated docs

gcc/testsuite/
* jit.dg/all-non-failing-tests.h: Added two tests
* jit.dg/test-error-ctor-array-wrong-obj.c: New
* jit.dg/test-error-ctor-struct-too-big.c: New
* jit.dg/test-error-ctor-struct-wrong-field-obj.c: New
* jit.dg/test-error-ctor-struct-wrong-type.c: New
* jit.dg/test-error-ctor-struct-wrong-type2.c
* jit.dg/test-error-ctor-union-wrong-field-name.c: New
* jit.dg/test-error-global-already-init.c: New
* jit.dg/test-error-global-common-section.c: New
* jit.dg/test-error-global-init-too-small-array.c: New
* jit.dg/test-error-global-lvalue-init.c: New
* jit.dg/test-error-global-nonconst-init.c: New
* jit.dg/test-global-init-rvalue.c: New
* jit.dg/test-local-init-rvalue.c: New

Fortran: PACK intrinsic should not try to read from zero-sized array

libgfortran/ChangeLog:

PR libfortran/103634
* intrinsics/pack_generic.c (pack_internal): Handle case when the
array argument of PACK has one or more extents of size zero to
avoid invalid reads.

gcc/testsuite/ChangeLog:

PR libfortran/103634
* gfortran.dg/intrinsic_pack_6.f90: New test.

Determine global memory accesses in ipa-modref

As discussed in PR103585, fatigue2 is now only benchmark from my usual testing
set (SPEC2k6, SPEC2k17, CPP benchmarks, polyhedron, Firefox, clang) which sees
important regression when inlining functions called once is limited.  This
prevents us from solving runtime issues in roms benchmarks and elsewhere.

The problem is that there is perdida function that takes many arguments and
some of them are array descriptors.  We constant propagate most of their fields
but still keep their initialization. Because perdida is quite fast, the call
overhead dominates, since we need over 100 memory stores consuing about 35%
of the overall benchmark runtime.

The memory stores would be eliminated if perdida did not call fortran I/O which
makes modref to thin that the array descriptors could be accessed. We are
quite close discovering that they can't becuase they are non-escaping from
function.  This patch makes modref to distingush between global memory access
(only things that escapes) and unkonwn accesss (that may access also
nonescaping things reaching the function).  This makes disambiguation for
functions containing error handling better.

Unfortunately the patch hits two semi-latent issues in Fortran frontned.
First is wrong code in gfortran.dg/unlimited_polymorphic_3.f03. This can be
turned into wrong code testcase on both mainline and gcc11 if the runtime
call is removed, so I filled PR 103662 for it. There is TBAA mismatch for
structure produced in FE.

Second is issue with GOMP where Fortran marks certain parameters as non-escaping
and then makes them escape via GOMP_parallel.  For this I disabled the use of
escape info in verify_arg which also disables the useful transform on perdida
but still does useful work for e.g. GCC error handling.  I will work on this
incrementally.

Bootstrapped/regtested x86_64-linux, lto-bootstrapped and also tested with
clang build.  I plan to commit this tomorrow if there are no complains
(the patch is not completely short but conceptualy simple and handles a lot
of common cases).

gcc/ChangeLog:

2021-12-12  Jan Hubicka  <hubicka@ucw.cz>

PR ipa/103585
* ipa-modref-tree.c (modref_access_node::range_info_useful_p): Handle
MODREF_GLOBAL_MEMORY_PARM.
(modref_access_node::dump): Likewise.
(modref_access_node::get_call_arg): Likewise.
* ipa-modref-tree.h (enum modref_special_parms): Add
MODREF_GLOBAL_MEMORY_PARM.
(modref_access_node::useful_for_kill): Handle
MODREF_GLOBAL_MEMORY_PARM.
(modref:tree::merge): Add promote_unknown_to_global.
* ipa-modref.c (verify_arg):New function.
(may_access_nonescaping_parm_p): New function.
(modref_access_analysis::record_global_memory_load): New member
function.
(modref_access_analysis::record_global_memory_store): Likewise.
(modref_access_analysis::process_fnspec): Distingush global and local
memory.
(modref_access_analysis::analyze_call): Likewise.
* tree-ssa-alias.c (ref_may_access_global_memory_p): New function.
(modref_may_conflict): Use it.

gcc/testsuite/ChangeLog:

2021-12-12  Jan Hubicka  <hubicka@ucw.cz>

* gcc.dg/analyzer/data-model-1.c: Disable ipa-modref.
* gcc.dg/uninit-38.c: Likewise.
* gcc.dg/uninit-pr98578.c: Liewise.

testsuite: Silence conversion warnings for MIN1 and MAX1

gcc/testsuite/ChangeLog:

PR fortran/91497
* gfortran.dg/pr91497.f90: Adjust test to use
dg-require-effective-target directive.
* gfortran.dg/pr91497_2.f90: New test to cover all targets.
Cover MAX1 and MIN1 intrinsics.

fortran: Silence conversion warnings for MIN1 and MAX1

gcc/fortran/ChangeLog:

PR fortran/91497
* simplify.c (simplify_min_max): Disable conversion warnings for
MIN1 and MAX1.

[PR99531] Do not scan push insn for ia32 in the test

The patch prohibits scanning push insn for ia32 as push are expected not to be generated only for x86_64 Linux ABI.

gcc/testsuite/ChangeLog:

PR target/99531
* gcc.target/i386/pr99531.c: Do not scan for ia32.

MAINTAINERS: Add myself to write after approval

Changelog:

* MAINTAINERS: Add myself to write after approval.

aarch64: Add LS64 extension and intrinsics

This patch is adding support for LS64 (Armv8.7-A Load/Store 64 Byte extension)
which is part of Armv8.7-A architecture. Changes include missing plumbing for
TARGET_LS64, LS64 data structure and intrinsics defined in ACLE. Machine
description of intrinsics is using new V8DI mode added in a separate patch.
__ARM_FEATURE_LS64 is defined if the Armv8.7-A LS64 instructions for atomic
64-byte access to device memory are supported.

New compiler internal type is added wrapping ACLE struct data512_t:

typedef struct {
  uint64_t val[8];
} __arm_data512_t;

gcc/ChangeLog:

* config/aarch64/aarch64-builtins.c (enum aarch64_builtins):
Define AARCH64_LS64_BUILTIN_LD64B, AARCH64_LS64_BUILTIN_ST64B,
AARCH64_LS64_BUILTIN_ST64BV, AARCH64_LS64_BUILTIN_ST64BV0.
(aarch64_init_ls64_builtin_decl): Helper function.
(aarch64_init_ls64_builtins): Helper function.
(aarch64_init_ls64_builtins_types): Helper function.
(aarch64_general_init_builtins): Init LS64 intrisics for
TARGET_LS64.
(aarch64_expand_builtin_ls64): LS64 intrinsics expander.
(aarch64_general_expand_builtin): Handle aarch64_expand_builtin_ls64.
(ls64_builtins_data): New helper struct.
(v8di_UP): New define.
* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins): Define
__ARM_FEATURE_LS64.
* config/aarch64/aarch64.c (aarch64_classify_address): Enforce the
V8DI range (7-bit signed scaled) for both ends of the range.
* config/aarch64/aarch64-simd.md (movv8di): New pattern.
(aarch64_movv8di): New pattern.
* config/aarch64/aarch64.h (AARCH64_ISA_LS64): New define.
(TARGET_LS64): New define.
* config/aarch64/aarch64.md: Add UNSPEC_LD64B, UNSPEC_ST64B,
UNSPEC_ST64BV and UNSPEC_ST64BV0.
(ld64b): New define_insn.
(st64b): New define_insn.
(st64bv): New define_insn.
(st64bv0): New define_insn.
* config/aarch64/arm_acle.h (data512_t): New type derived from
__arm_data512_t.
(__arm_data512_t): New internal type.
(__arm_ld64b): New intrinsic.
(__arm_st64b): New intrinsic.
(__arm_st64bv): New intrinsic.
(__arm_st64bv0): New intrinsic.
* config/arm/types.md: Add new type ls64.

gcc/testsuite/ChangeLog:

* gcc.target/aarch64/acle/ls64_asm.c: New test.
* gcc.target/aarch64/acle/ls64_ld64b.c: New test.
* gcc.target/aarch64/acle/ls64_ld64b-2.c: New test.
* gcc.target/aarch64/acle/ls64_ld64b-3.c: New test.
* gcc.target/aarch64/acle/ls64_st64b.c: New test.
* gcc.target/aarch64/acle/ls64_ld_st_o0.c: New test.
* gcc.target/aarch64/acle/ls64_st64b-2.c: New test.
* gcc.target/aarch64/acle/ls64_st64bv.c: New test.
* gcc.target/aarch64/acle/ls64_st64bv-2.c: New test.
* gcc.target/aarch64/acle/ls64_st64bv-3.c: New test.
* gcc.target/aarch64/acle/ls64_st64bv0.c: New test.
* gcc.target/aarch64/acle/ls64_st64bv0-2.c: New test.
* gcc.target/aarch64/acle/ls64_st64bv0-3.c: New test.
* gcc.target/aarch64/pragma_cpp_predefs_2.c: Add checks
for __ARM_FEATURE_LS64.

testsuite: fix ASAN errors

The tests failed on my machine as they contain out-of-bounds
access.

gcc/testsuite/ChangeLog:

* gcc.target/i386/avx2-psraq-1.c: Use ARRAY_SIZE.
* gcc.target/i386/m128-check.h: Move it to the top-level
context.
* gcc.target/i386/sse2-psraq-1.c: Use ARRAY_SIZE.
* gcc.target/i386/sse4_2-check.h: Include the header with
ARRAY_SIZE definition.

libstdc++: Fix non-reserved name in <regex> header

libstdc++-v3/ChangeLog:

* include/bits/regex_compiler.tcc (_Compiler::_M_match_token):
Use reserved name for parameter.
* testsuite/17_intro/names.cc: Check "token".

c++: processing_template_decl vs template depth [PR103408]

We use processing_template_decl in two slightly different ways: as a
flag to signal that we're dealing with templated trees, and as a measure
of the current syntactic template nesting depth.  This overloaded
meaning of p_t_d is conceptually confusing and leads to bugs that we end
up working around in an ad-hoc fashion.

This patch replaces all uses of processing_template_decl that care about
its magnitude to instead look at the depth of current_template_parms
via a new macro current_template_depth.  This allows us to eliminate 3
workarounds in the concepts code: two about non-templated
requires-expressions (in constraint.cc) and one about lambdas inside
constraints (in cp_parser_requires_clause_expression etc).  This also
fixes the testcase in PR103408 about auto(x) used inside a non-templated
requires-expression.

The replacement was mostly mechanical, aside from two issues:

  * In synthesize_implicit_template_parm, when introducing a new template
    parameter list for an abbreviated function template, we need to add
    the new level of current_template_parms sooner, before calling
    process_template_parm, since this latter function now looks at
    current_template_depth to determine the level of the new parameter.

  * In instantiate_class_template_1 after substituting a template
    friend declaration, we currently increment processing_template_decl
    around the call to make_friend_class so that the friend_depth
    computation within this subroutine yields a nonzero value.  We could
    just replace this with an equivalent manipulation of
    current_template_depth, but this patch instead rewrites the
    friend_depth calculation within make_friend_class to not depend on
    p_t_d / c_t_d at all when called from instantiate_class_template_1.

PR c++/103408

gcc/cp/ChangeLog:

* constraint.cc (type_deducible_p): Remove workaround for
non-templated requires-expressions.
(normalize_placeholder_type_constraints): Likewise.
* cp-tree.h (current_template_depth): Define.
(PROCESSING_REAL_TEMPLATE_DECL): Inspect current_template_depth
instead of the magnitude of processing_template_decl.
* decl.c (start_decl): Likewise.
(grokfndecl): Likewise.
(grokvardecl): Likewise.
(grokdeclarator): Likewise.
* friend.c (make_friend_class): Likewise.  Calculate
friend_depth differently when called at instantiation time
instead of parse time.
(do_friend): Likewise.
* parser.c (cp_parser_requires_clause_expression): Remove
workaround for lambdas inside constraints.
(cp_parser_constraint_expression): Likewise.
(cp_parser_requires_expression): Likewise.
(synthesize_implicit_template_parm): Add to current_template_parms
before calling process_template_parm.
* pt.c (inline_needs_template_parms): Inspect
current_template_depth instead of the magnitude of
processing_template_decl.
(push_inline_template_parms_recursive): Likewise.
(maybe_begin_member_template_processing): Likewise.
(begin_template_parm_list): Likewise.
(process_template_parm): Likewise.
(end_template_parm_list): Likewise.
(push_template_decl): Likewise.
(add_inherited_template_parms): Likewise.
(instantiate_class_template_1): Don't adjust
processing_template_decl around the call to make_friend_class.
adjust_processing_template_decl to adjust_template_depth.  Set
current_template_parms instead of processing_template_decl when
adjust_template_depth.
(make_auto_1): Inspect current_template_depth instead of the
magnitude of processing_template_decl.
(splice_late_return_type): Likewise.
* semantics.c (fixup_template_type): Likewise.

gcc/testsuite/ChangeLog:

* g++.dg/concepts/diagnostic18.C: Expect a "constraints on a
non-templated function" error.
* g++.dg/cpp23/auto-fncast11.C: New test.

Remove fpic multilib on x86_64-vxworks

The addition of fPIC for shared libraries is performed
independently from multilibs and fpic multilibs have
no other particular purpose for VxWorks at this stage.

They incur extra build time, complexify the install tree
and are a bit tricky because -fpic is not supported for kernel
mode.

2021-12-14  Olivier Hainque  <hainque@adacore.com>

gcc/
* config/i386/t-vxworks: Drop the fPIC multilibs.

c++: don't leak 'arglist' in build_new_op

gcc/cp/ChangeLog:

* call.c (build_new_op): Use releasing_vec for arglist.  Declare
conv in the scope it's used.

c++: remove COMPOUND_EXPR_OVERLOADED flag

This flag is never set because non-dependent COMPOUND_EXPRs that resolve
to an overload are expressed as a CALL_EXPR at template definition time
(in build_x_compound_expr) ever since r6-5772.

gcc/cp/ChangeLog:

* cp-tree.h (COMPOUND_EXPR_OVERLOADED): Remove.
* pt.c (build_non_dependent_expr): Don't inspect the flag.
* tree.c (build_min_non_dep): Don't set the flag.

Drop the fpic multilib for powerpc*-vxworks*

The addition of fPIC for shared libraries is performed
independently from multilibs and the fpic multilibs have
no other particular purpose. They incur extra build time,
complexify the install tree and are a bit tricky because
-fpic is not supported for kernel mode.

2020-11-06  Fred Konrad  <konrad@adacore.com>

gcc/
* config/rs6000/t-vxworks: Drop the fPIC multilib.

c: Fix ICE on deferred pragma in unknown attribute arguments [PR103587]

We ICE on the following testcase, because c_parser_balanced_token_sequence
when encountering a deferred pragma will just use c_parser_consume_token
which the FE doesn't allow for CPP_PRAGMA tokens (and if that wasn't
the case, it could ICE on CPP_PRAGMA_EOL similarly).
We don't know in what exact context the pragma appears when we don't
know what those arguments semantically mean, so I think we should just
skip over them, like e.g. the C++ FE does.  And, I think (/[/{ vs. )/]/}
from outside of the pragma shouldn't be paired with those inside of
the pragma and it doesn't seem to be necessary to check that inside of
the pragma line itself all the paren kinds are balanced.

2021-12-14  Jakub Jelinek  <jakub@redhat.com>

PR c/103587
* c-parser.c (c_parser_balanced_token_sequence): For CPP_PRAGMA,
consume the pragma and silently skip to the pragma eol.

* gcc.dg/pr103587.c: New test.

Adjust 'gfortran.dg/goacc/privatization-1-*' [PR103576, PR103697]

... for the recent commit 494ebfa7c9aacaeb6ec1fccc47a0e49f31eb2bb8
"Fortran: Handle compare in OpenMP atomic", which changes the GIMPLE IR
such that a temporary is no longer used; 'original' dump:

             x = *a;
    -        {
    -          integer(kind=4) D.4237;
    -
    -          D.4237 = *a;
               #pragma omp atomic relaxed
    -            &y = D.4237;
    -        }
    +          &y = *a;
           }

(I'm not familiar to comment whether that's correct; but it appears that the
difference again disappears in later compiler passes.)

These OpenACC test cases verify behavior re OpenACC privatization levels, and
have to be adjusted accordingly.

gcc/testsuite/
PR fortran/103576
PR testsuite/103697
* gfortran.dg/goacc/privatization-1-compute-loop.f90: Adjust.
* gfortran.dg/goacc/privatization-1-compute.f90: Likewise.
* gfortran.dg/goacc/privatization-1-routine_gang-loop.f90:
Likewise.
* gfortran.dg/goacc/privatization-1-routine_gang.f90: Likewise.

Daily bump.