Dima Chumak [Mon, 17 Jan 2022 13:32:16 +0000 (15:32 +0200)]
net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE
Only prio 1 is supported for nic mode when there is no ignore flow level
support in firmware. But for switchdev mode, which supports fixed number
of statically pre-allocated prios, this restriction is not relevant so
it can be relaxed.
Fixes:
d671e109bd85 ("net/mlx5: Fix tc max supported prio for nic mode")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Moshe Shemesh [Fri, 4 Feb 2022 09:47:44 +0000 (11:47 +0200)]
net/mlx5: Fix a race on command flush flow
Fix a refcount use after free warning due to a race on command entry.
Such race occurs when one of the commands releases its last refcount and
frees its index and entry while another process running command flush
flow takes refcount to this command entry. The process which handles
commands flush may see this command as needed to be flushed if the other
process released its refcount but didn't release the index yet. Fix it
by adding the needed spin lock.
It fixes the following warning trace:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 11 PID: 540311 at lib/refcount.c:25 refcount_warn_saturate+0x80/0xe0
...
RIP: 0010:refcount_warn_saturate+0x80/0xe0
...
Call Trace:
<TASK>
mlx5_cmd_trigger_completions+0x293/0x340 [mlx5_core]
mlx5_cmd_flush+0x3a/0xf0 [mlx5_core]
enter_error_state+0x44/0x80 [mlx5_core]
mlx5_fw_fatal_reporter_err_work+0x37/0xe0 [mlx5_core]
process_one_work+0x1be/0x390
worker_thread+0x4d/0x3d0
? rescuer_thread+0x350/0x350
kthread+0x141/0x160
? set_kthread_struct+0x40/0x40
ret_from_fork+0x1f/0x30
</TASK>
Fixes:
50b2412b7e78 ("net/mlx5: Avoid possible free of command entry while timeout comp handler")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Mohammad Kabat [Thu, 25 Mar 2021 12:38:55 +0000 (14:38 +0200)]
net/mlx5: Fix size field in bufferx_reg struct
According to HW spec the field "size" should be 16 bits
in bufferx register.
Fixes:
e281682bf294 ("net/mlx5_core: HW data structs/types definitions cleanup")
Signed-off-by: Mohammad Kabat <mohammadkab@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
David S. Miller [Wed, 9 Mar 2022 14:48:11 +0000 (14:48 +0000)]
Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2022-03-09
1) Fix IPv6 PMTU discovery for xfrm interfaces.
From Lina Wang.
2) Revert failing for policies and states that are
configured with XFRMA_IF_ID 0. It broke a
user configuration. From Kai Lueke.
3) Fix a possible buffer overflow in the ESP output path.
4) Fix ESP GSO for tunnel and BEET mode on inter address
family tunnels.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Duoming Zhou [Tue, 8 Mar 2022 08:12:23 +0000 (16:12 +0800)]
ax25: Fix NULL pointer dereference in ax25_kill_by_device
When two ax25 devices attempted to establish connection, the requester use ax25_create(),
ax25_bind() and ax25_connect() to initiate connection. The receiver use ax25_rcv() to
accept connection and use ax25_create_cb() in ax25_rcv() to create ax25_cb, but the
ax25_cb->sk is NULL. When the receiver is detaching, a NULL pointer dereference bug
caused by sock_hold(sk) in ax25_kill_by_device() will happen. The corresponding
fail log is shown below:
===============================================================
BUG: KASAN: null-ptr-deref in ax25_device_event+0xfd/0x290
Call Trace:
...
ax25_device_event+0xfd/0x290
raw_notifier_call_chain+0x5e/0x70
dev_close_many+0x174/0x220
unregister_netdevice_many+0x1f7/0xa60
unregister_netdevice_queue+0x12f/0x170
unregister_netdev+0x13/0x20
mkiss_close+0xcd/0x140
tty_ldisc_release+0xc0/0x220
tty_release_struct+0x17/0xa0
tty_release+0x62d/0x670
...
This patch add condition check in ax25_kill_by_device(). If s->sk is
NULL, it will goto if branch to kill device.
Fixes:
4e0f718daf97 ("ax25: improve the incomplete fix to avoid UAF and NPD bugs")
Reported-by: Thomas Osterried <thomas@osterried.de>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Miaoqian Lin [Tue, 8 Mar 2022 07:42:47 +0000 (07:42 +0000)]
net: marvell: prestera: Add missing of_node_put() in prestera_switch_set_base_mac_addr
This node pointer is returned by of_find_compatible_node() with
refcount incremented. Calling of_node_put() to aovid the refcount leak.
Fixes:
501ef3066c89 ("net: marvell: prestera: Add driver for Prestera family ASIC devices")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiasheng Jiang [Tue, 8 Mar 2022 06:57:39 +0000 (14:57 +0800)]
net: ethernet: lpc_eth: Handle error for clk_enable
As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.
Fixes:
b7370112f519 ("lpc32xx: Added ethernet driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Minghao Chi (CGEL ZTE) [Tue, 8 Mar 2022 06:43:09 +0000 (06:43 +0000)]
net:mcf8390: Use platform_get_irq() to get the interrupt
It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ)
for requesting IRQ's resources any more, as they can be not ready yet in
case of DT-booting.
platform_get_irq() instead is a recommended way for getting IRQ even if
it was not retrieved earlier.
It also makes code simpler because we're getting "int" value right away
and no conversion from resource to int is required.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiasheng Jiang [Tue, 8 Mar 2022 06:40:07 +0000 (14:40 +0800)]
net: ethernet: ti: cpts: Handle error for clk_enable
As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.
Fixes:
8a2c9a5ab4b9 ("net: ethernet: ti: cpts: rework initialization/deinitialization")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 9 Mar 2022 10:42:14 +0000 (10:42 +0000)]
Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-03-08
This series contains updates to iavf, i40e, and ice drivers.
Michal ensures netdev features are properly updated to reflect VLAN
changes received from PF and adds an additional flag for MSI-X
reinitialization as further differentiation of reinitialization
operations is needed for iavf.
Jake stops disabling of VFs due to failed virtchannel responses for
i40e and ice driver.
Dave moves MTU event notification to the service task to prevent issues
with RTNL lock for ice.
Christophe Jaillet corrects an allocation to GFP_ATOMIC instead of
GFP_KERNEL for ice.
Jedrzej fixes the value for link speed comparison which was preventing
the requested value from being set for ice.
---
Note: This will conflict when merging with net-next. Resolution:
diff --cc drivers/net/ethernet/intel/ice/ice.h
index
dc42ff92dbad,
3121f9b04f59..
000000000000
--- a/drivers/net/ethernet/intel/ice/ice.h
+++ b/drivers/net/ethernet/intel/ice/ice.h
@@@ -484,10 -481,9 +484,11 @@@ enum ice_pf_flags
ICE_FLAG_LEGACY_RX,
ICE_FLAG_VF_TRUE_PROMISC_ENA,
ICE_FLAG_MDD_AUTO_RESET_VF,
+ ICE_FLAG_VF_VLAN_PRUNING,
ICE_FLAG_LINK_LENIENT_MODE_ENA,
ICE_FLAG_PLUG_AUX_DEV,
+ ICE_FLAG_MTU_CHANGED,
+ ICE_FLAG_GNSS, /* GNSS successfully initialized */
ICE_PF_FLAGS_NBITS /* must be last */
};
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tung Nguyen [Tue, 8 Mar 2022 02:11:59 +0000 (02:11 +0000)]
tipc: fix incorrect order of state message data sanity check
When receiving a state message, function tipc_link_validate_msg()
is called to validate its header portion. Then, its data portion
is validated before it can be accessed correctly. However, current
data sanity check is done after the message header is accessed to
update some link variables.
This commit fixes this issue by moving the data sanity check to
the beginning of state message handling and right after the header
sanity check.
Fixes:
9aa422ad3266 ("tipc: improve size validations for received domain records")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/20220308021200.9245-1-tung.q.nguyen@dektech.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Miaoqian Lin [Tue, 8 Mar 2022 02:47:49 +0000 (02:47 +0000)]
ethernet: Fix error handling in xemaclite_of_probe
This node pointer is returned by of_parse_phandle() with refcount
incremented in this function. Calling of_node_put() to avoid the
refcount leak. As the remove function do.
Fixes:
5cdaaa12866e ("net: emaclite: adding MDIO and phy lib support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220308024751.2320-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jedrzej Jagielski [Tue, 22 Feb 2022 11:43:04 +0000 (11:43 +0000)]
ice: Fix curr_link_speed advertised speed
Change curr_link_speed advertised speed, due to
link_info.link_speed is not equal phy.curr_user_speed_req.
Without this patch it is impossible to set advertised
speed to same as link_speed.
Testing Hints: Try to set advertised speed
to 25G only with 25G default link (use ethtool -s 0x80000000)
Fixes:
48cb27f2fd18 ("ice: Implement handlers for ethtool PHY/link operations")
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Christophe JAILLET [Sun, 16 Jan 2022 18:46:20 +0000 (19:46 +0100)]
ice: Don't use GFP_KERNEL in atomic context
ice_misc_intr() is an irq handler. It should not sleep.
Use GFP_ATOMIC instead of GFP_KERNEL when allocating some memory.
Fixes:
348048e724a0 ("ice: Implement iidc operations")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Leszek Kaliszczuk <leszek.kaliszczuk@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Dave Ertman [Fri, 18 Feb 2022 20:39:25 +0000 (12:39 -0800)]
ice: Fix error with handling of bonding MTU
When a bonded interface is destroyed, .ndo_change_mtu can be called
during the tear-down process while the RTNL lock is held. This is a
problem since the auxiliary driver linked to the LAN driver needs to be
notified of the MTU change, and this requires grabbing a device_lock on
the auxiliary_device's dev. Currently this is being attempted in the
same execution context as the call to .ndo_change_mtu which is causing a
dead-lock.
Move the notification of the changed MTU to a separate execution context
(watchdog service task) and eliminate the "before" notification.
Fixes:
348048e724a0e ("ice: Implement iidc operations")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Jonathan Toppins <jtoppins@redhat.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jacob Keller [Thu, 17 Feb 2022 00:51:36 +0000 (16:51 -0800)]
ice: stop disabling VFs due to PF error responses
The ice_vc_send_msg_to_vf function has logic to detect "failure"
responses being sent to a VF. If a VF is sent more than
ICE_DFLT_NUM_INVAL_MSGS_ALLOWED then the VF is marked as disabled.
Almost identical logic also existed in the i40e driver.
This logic was added to the ice driver in commit
1071a8358a28 ("ice:
Implement virtchnl commands for AVF support") which itself copied from
the i40e implementation in commit
5c3c48ac6bf5 ("i40e: implement virtual
device interface").
Neither commit provides a proper explanation or justification of the
check. In fact, later commits to i40e changed the logic to allow
bypassing the check in some specific instances.
The "logic" for this seems to be that error responses somehow indicate a
malicious VF. This is not really true. The PF might be sending an error
for any number of reasons such as lack of resources, etc.
Additionally, this causes the PF to log an info message for every failed
VF response which may confuse users, and can spam the kernel log.
This behavior is not documented as part of any requirement for our
products and other operating system drivers such as the FreeBSD
implementation of our drivers do not include this type of check.
In fact, the change from dev_err to dev_info in i40e commit
18b7af57d9c1
("i40e: Lower some message levels") explains that these messages
typically don't actually indicate a real issue. It is quite likely that
a user who hits this in practice will be very confused as the VF will be
disabled without an obvious way to recover.
We already have robust malicious driver detection logic using actual
hardware detection mechanisms that detect and prevent invalid device
usage. Remove the logic since its not a documented requirement and the
behavior is not intuitive.
Fixes:
1071a8358a28 ("ice: Implement virtchnl commands for AVF support")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jacob Keller [Thu, 17 Feb 2022 00:51:35 +0000 (16:51 -0800)]
i40e: stop disabling VFs due to PF error responses
The i40e_vc_send_msg_to_vf_ex (and its wrapper i40e_vc_send_msg_to_vf)
function has logic to detect "failure" responses sent to the VF. If a VF
is sent more than I40E_DEFAULT_NUM_INVALID_MSGS_ALLOWED, then the VF is
marked as disabled. In either case, a dev_info message is printed
stating that a VF opcode failed.
This logic originates from the early implementation of VF support in
commit
5c3c48ac6bf5 ("i40e: implement virtual device interface").
That commit did not go far enough. The "logic" for this behavior seems
to be that error responses somehow indicate a malicious VF. This is not
really true. The PF might be sending an error for any number of reasons
such as lacking resources, an unsupported operation, etc. This does not
indicate a malicious VF. We already have a separate robust malicious VF
detection which relies on hardware logic to detect and prevent a variety
of behaviors.
There is no justification for this behavior in the original
implementation. In fact, a later commit
18b7af57d9c1 ("i40e: Lower some
message levels") reduced the opcode failure message from a dev_err to a
dev_info. In addition, recent commit
01cbf50877e6 ("i40e: Fix to not
show opcode msg on unsuccessful VF MAC change") changed the logic to
allow quieting it for expected failures.
That commit prevented this logic from kicking in for specific
circumstances. This change did not go far enough. The behavior is not
documented nor is it part of any requirement for our products. Other
operating systems such as the FreeBSD implementation of our driver do
not include this logic.
It is clear this check does not make sense, and causes problems which
led to ugly workarounds.
Fix this by just removing the entire logic and the need for the
i40e_vc_send_msg_to_vf_ex function.
Fixes:
01cbf50877e6 ("i40e: Fix to not show opcode msg on unsuccessful VF MAC change")
Fixes:
5c3c48ac6bf5 ("i40e: implement virtual device interface")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Michal Maloszewski [Wed, 2 Feb 2022 12:44:54 +0000 (12:44 +0000)]
iavf: Fix adopting new combined setting
In some cases overloaded flag IAVF_FLAG_REINIT_ITR_NEEDED
which should indicate that interrupts need to be completely
reinitialized during reset leads to RTNL deadlocks using ethtool -C
while a reset is in progress.
To fix, it was added a new flag IAVF_FLAG_REINIT_MSIX_NEEDED
used to trigger MSI-X reinit.
New combined setting is fixed adopt after VF reset.
This has been implemented by call reinit interrupt scheme
during VF reset.
Without this fix new combined setting has never been adopted.
Fixes:
209f2f9c7181 ("iavf: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2 negotiation")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Michal Maloszewski [Mon, 24 Jan 2022 13:35:43 +0000 (13:35 +0000)]
iavf: Fix handling of vlan strip virtual channel messages
Modify netdev->features for vlan stripping based on virtual
channel messages received from the PF. Change is needed
to synchronize vlan strip status between PF sysfs and iavf ethtool.
Fixes:
5951a2b9812d ("iavf: Fix VLAN feature flags after VFR")
Signed-off-by: Norbert Ciosek <norbertx.ciosek@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Russell King (Oracle) [Mon, 7 Mar 2022 12:13:30 +0000 (12:13 +0000)]
net: dsa: mt7530: fix incorrect test in mt753x_phylink_validate()
Discussing one of the tests in mt753x_phylink_validate() with Landen
Chao confirms that the "||" should be "&&". Fix this.
Fixes:
c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1nRCF0-00CiXD-7q@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fabio Estevam [Sat, 5 Mar 2022 20:47:20 +0000 (17:47 -0300)]
smsc95xx: Ignore -ENODEV errors when device is unplugged
According to Documentation/driver-api/usb/URB.rst when a device
is unplugged usb_submit_urb() returns -ENODEV.
This error code propagates all the way up to usbnet_read_cmd() and
usbnet_write_cmd() calls inside the smsc95xx.c driver during
Ethernet cable unplug, unbind or reboot.
This causes the following errors to be shown on reboot, for example:
ci_hdrc ci_hdrc.1: remove, state 1
usb usb2: USB disconnect, device number 1
usb 2-1: USB disconnect, device number 2
usb 2-1.1: USB disconnect, device number 3
smsc95xx 2-1.1:1.0 eth1: unregister 'smsc95xx' usb-ci_hdrc.1-1.1, smsc95xx USB 2.0 Ethernet
smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19
smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS
smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy
smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19
smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS
smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy
smsc95xx 2-1.1:1.0 eth1: hardware isn't capable of remote wakeup
usb 2-1.4: USB disconnect, device number 4
ci_hdrc ci_hdrc.1: USB bus 2 deregistered
ci_hdrc ci_hdrc.0: remove, state 4
usb usb1: USB disconnect, device number 1
ci_hdrc ci_hdrc.0: USB bus 1 deregistered
imx2-wdt
30280000.watchdog: Device shutdown: Expect reboot!
reboot: Restarting system
Ignore the -ENODEV errors inside __smsc95xx_mdio_read() and
__smsc95xx_phy_wait_not_busy() and do not print error messages
when -ENODEV is returned.
Fixes:
a049a30fc27c ("net: usb: Correct PHY handling of smsc95xx")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Rix [Sat, 5 Mar 2022 15:06:42 +0000 (07:06 -0800)]
qed: return status of qed_iov_get_link
Clang static analysis reports this issue
qed_sriov.c:4727:19: warning: Assigned value is
garbage or undefined
ivi->max_tx_rate = tx_rate ? tx_rate : link.speed;
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
link is only sometimes set by the call to qed_iov_get_link()
qed_iov_get_link fails without setting link or returning
status. So change the decl to return status.
Fixes:
73390ac9d82b ("qed*: support ndo_get_vf_config")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert [Mon, 7 Mar 2022 12:11:41 +0000 (13:11 +0100)]
net: Fix esp GSO on inter address family tunnels.
The esp tunnel GSO handlers use skb_mac_gso_segment to
push the inner packet to the segmentation handlers.
However, skb_mac_gso_segment takes the Ethernet Protocol
ID from 'skb->protocol' which is wrong for inter address
family tunnels. We fix this by introducing a new
skb_eth_gso_segment function.
This function can be used if it is necessary to pass the
Ethernet Protocol ID directly to the segmentation handler.
First users of this function will be the esp4 and esp6
tunnel segmentation handlers.
Fixes:
c35fe4106b92 ("xfrm: Add mode handlers for IPsec on layer 2")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Steffen Klassert [Mon, 7 Mar 2022 12:11:40 +0000 (13:11 +0100)]
esp: Fix BEET mode inter address family tunneling on GSO
The xfrm{4,6}_beet_gso_segment() functions did not correctly set the
SKB_GSO_IPXIP4 and SKB_GSO_IPXIP6 gso types for the address family
tunneling case. Fix this by setting these gso types.
Fixes:
384a46ea7bdc7 ("esp4: add gso_segment for esp4 beet mode")
Fixes:
7f9e40eb18a99 ("esp6: add gso_segment for esp6 beet mode")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Steffen Klassert [Mon, 7 Mar 2022 12:11:39 +0000 (13:11 +0100)]
esp: Fix possible buffer overflow in ESP transformation
The maximum message size that can be send is bigger than
the maximum site that skb_page_frag_refill can allocate.
So it is possible to write beyond the allocated buffer.
Fix this by doing a fallback to COW in that case.
v2:
Avoid get get_order() costs as suggested by Linus Torvalds.
Fixes:
cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes:
03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Reported-by: valis <sec@valis.email>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Zheyu Ma [Sat, 5 Mar 2022 14:55:04 +0000 (14:55 +0000)]
ethernet: sun: Free the coherent when failing in probing
When the driver fails to register net device, it should free the DMA
region first, and then do other cleanup.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Aleksander Jan Bajkowski [Sat, 5 Mar 2022 11:20:39 +0000 (12:20 +0100)]
net: lantiq_xrx200: fix use after free bug
The skb->len field is read after the packet is sent to the network
stack. In the meantime, skb can be freed. This patch fixes this bug.
Fixes:
c3e6b2c35b34 ("net: lantiq_xrx200: add ingress SG DMA support")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jia-Ju Bai [Sat, 5 Mar 2022 09:14:11 +0000 (01:14 -0800)]
net: qlogic: check the return value of dma_alloc_coherent() in qed_vf_hw_prepare()
The function dma_alloc_coherent() in qed_vf_hw_prepare() can fail, so
its return value should be checked.
Fixes:
1408cc1fa48c ("qed: Introduce VFs")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jia-Ju Bai [Sat, 5 Mar 2022 08:58:16 +0000 (00:58 -0800)]
isdn: hfcpci: check the return value of dma_set_mask() in setup_hw()
The function dma_set_mask() in setup_hw() can fail, so its return value
should be checked.
Fixes:
1700fe1a10dc ("Add mISDN HFC PCI driver")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 3 Mar 2022 14:08:40 +0000 (16:08 +0200)]
net: dsa: unlock the rtnl_mutex when dsa_master_setup() fails
After the blamed commit, dsa_tree_setup_master() may exit without
calling rtnl_unlock(), fix that.
Fixes:
c146f9bc195a ("net: dsa: hold rtnl_mutex when calling dsa_master_{setup,teardown}")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kai Lueke [Thu, 3 Mar 2022 14:55:10 +0000 (15:55 +0100)]
Revert "xfrm: state and policy should fail if XFRMA_IF_ID 0"
This reverts commit
68ac0f3810e76a853b5f7b90601a05c3048b8b54 because ID
0 was meant to be used for configuring the policy/state without
matching for a specific interface (e.g., Cilium is affected, see
https://github.com/cilium/cilium/pull/18789 and
https://github.com/cilium/cilium/pull/19019).
Signed-off-by: Kai Lueke <kailueke@linux.microsoft.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Alexey Khoroshilov [Fri, 4 Mar 2022 18:25:36 +0000 (21:25 +0300)]
mISDN: Fix memory leak in dsp_pipeline_build()
dsp_pipeline_build() allocates dup pointer by kstrdup(cfg),
but then it updates dup variable by strsep(&dup, "|").
As a result when it calls kfree(dup), the dup variable contains NULL.
Found by Linux Driver Verification project (linuxtesting.org) with SVACE.
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes:
960366cf8dbb ("Add mISDN DSP")
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Thu, 3 Mar 2022 07:54:15 +0000 (08:54 +0100)]
net: phy: meson-gxl: fix interrupt handling in forced mode
This PHY doesn't support a link-up interrupt source. If aneg is enabled
we use the "aneg complete" interrupt for this purpose, but if aneg is
disabled link-up isn't signaled currently.
According to a vendor driver there's an additional "energy detect"
interrupt source that can be used to signal link-up if aneg is disabled.
We can safely ignore this interrupt source if aneg is enabled.
This patch was tested on a TX3 Mini TV box with S905W (even though
boot message says it's a S905D).
This issue has been existing longer, but due to changes in phylib and
the driver the patch applies only from the commit marked as fixed.
Fixes:
84c8f773d2dc ("net: phy: meson-gxl: remove the use of .ack_callback()")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/04cac530-ea1b-850e-6cfa-144a55c4d75d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tung Nguyen [Fri, 4 Mar 2022 03:25:18 +0000 (03:25 +0000)]
tipc: fix kernel panic when enabling bearer
When enabling a bearer on a node, a kernel panic is observed:
[ 4.498085] RIP: 0010:tipc_mon_prep+0x4e/0x130 [tipc]
...
[ 4.520030] Call Trace:
[ 4.520689] <IRQ>
[ 4.521236] tipc_link_build_proto_msg+0x375/0x750 [tipc]
[ 4.522654] tipc_link_build_state_msg+0x48/0xc0 [tipc]
[ 4.524034] __tipc_node_link_up+0xd7/0x290 [tipc]
[ 4.525292] tipc_rcv+0x5da/0x730 [tipc]
[ 4.526346] ? __netif_receive_skb_core+0xb7/0xfc0
[ 4.527601] tipc_l2_rcv_msg+0x5e/0x90 [tipc]
[ 4.528737] __netif_receive_skb_list_core+0x20b/0x260
[ 4.530068] netif_receive_skb_list_internal+0x1bf/0x2e0
[ 4.531450] ? dev_gro_receive+0x4c2/0x680
[ 4.532512] napi_complete_done+0x6f/0x180
[ 4.533570] virtnet_poll+0x29c/0x42e [virtio_net]
...
The node in question is receiving activate messages in another
thread after changing bearer status to allow message sending/
receiving in current thread:
thread 1 | thread 2
-------- | --------
|
tipc_enable_bearer() |
test_and_set_bit_lock() |
tipc_bearer_xmit_skb() |
| tipc_l2_rcv_msg()
| tipc_rcv()
| __tipc_node_link_up()
| tipc_link_build_state_msg()
| tipc_link_build_proto_msg()
| tipc_mon_prep()
| {
| ...
| // null-pointer dereference
| u16 gen = mon->dom_gen;
| ...
| }
// Not being executed yet |
tipc_mon_create() |
{ |
... |
// allocate |
mon = kzalloc(); |
... |
} |
Monitoring pointer in thread 2 is dereferenced before monitoring data
is allocated in thread 1. This causes kernel panic.
This commit fixes it by allocating the monitoring data before enabling
the bearer to receive messages.
Fixes:
35c55c9877f8 ("tipc: add neighbor monitoring framework")
Reported-by: Shuang Li <shuali@redhat.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Robert Hancock [Thu, 3 Mar 2022 18:10:27 +0000 (12:10 -0600)]
net: macb: Fix lost RX packet wakeup race in NAPI receive
There is an oddity in the way the RSR register flags propagate to the
ISR register (and the actual interrupt output) on this hardware: it
appears that RSR register bits only result in ISR being asserted if the
interrupt was actually enabled at the time, so enabling interrupts with
RSR bits already set doesn't trigger an interrupt to be raised. There
was already a partial fix for this race in the macb_poll function where
it checked for RSR bits being set and re-triggered NAPI receive.
However, there was a still a race window between checking RSR and
actually enabling interrupts, where a lost wakeup could happen. It's
necessary to check again after enabling interrupts to see if RSR was set
just prior to the interrupt being enabled, and re-trigger receive in that
case.
This issue was noticed in a point-to-point UDP request-response protocol
which periodically saw timeouts or abnormally high response times due to
received packets not being processed in a timely fashion. In many
applications, more packets arriving, including TCP retransmissions, would
cause the original packet to be processed, thus masking the issue.
Fixes:
02f7a34f34e3 ("net: macb: Re-enable RX interrupt only when RX is done")
Cc: stable@vger.kernel.org
Co-developed-by: Scott McNutt <scott.mcnutt@siriusxm.com>
Signed-off-by: Scott McNutt <scott.mcnutt@siriusxm.com>
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 4 Mar 2022 04:31:02 +0000 (20:31 -0800)]
Merge tag 'for-net-2022-03-03' of git://git./linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix regression with processing of MGMT commands
- Fix unbalanced unlock in Set Device Flags
* tag 'for-net-2022-03-03' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_sync: Fix not processing all entries on cmd_sync_work
Bluetooth: hci_core: Fix unbalanced unlock in set_device_flags()
====================
Link: https://lore.kernel.org/r/20220303210743.314679-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 3 Mar 2022 19:10:56 +0000 (11:10 -0800)]
Merge tag 'net-5.17-rc7' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can, xfrm, wifi, bluetooth, and netfilter.
Lots of various size fixes, the length of the tag speaks for itself.
Most of the 5.17-relevant stuff comes from xfrm, wifi and bt trees
which had been lagging as you pointed out previously. But there's also
a larger than we'd like portion of fixes for bugs from previous
releases.
Three more fixes still under discussion, including and xfrm revert for
uAPI error.
Current release - regressions:
- iwlwifi: don't advertise TWT support, prevent FW crash
- xfrm: fix the if_id check in changelink
- xen/netfront: destroy queues before real_num_tx_queues is zeroed
- bluetooth: fix not checking MGMT cmd pending queue, make scanning
work again
Current release - new code bugs:
- mptcp: make SIOCOUTQ accurate for fallback socket
- bluetooth: access skb->len after null check
- bluetooth: hci_sync: fix not using conn_timeout
- smc: fix cleanup when register ULP fails
- dsa: restore error path of dsa_tree_change_tag_proto
- iwlwifi: fix build error for IWLMEI
- iwlwifi: mvm: propagate error from request_ownership to the user
Previous releases - regressions:
- xfrm: fix pMTU regression when reported pMTU is too small
- xfrm: fix TCP MSS calculation when pMTU is close to 1280
- bluetooth: fix bt_skb_sendmmsg not allocating partial chunks
- ipv6: ensure we call ipv6_mc_down() at most once, prevent leaks
- ipv6: prevent leaks in igmp6 when input queues get full
- fix up skbs delta_truesize in UDP GRO frag_list
- eth: e1000e: fix possible HW unit hang after an s0ix exit
- eth: e1000e: correct NVM checksum verification flow
- ptp: ocp: fix large time adjustments
Previous releases - always broken:
- tcp: make tcp_read_sock() more robust in presence of urgent data
- xfrm: distinguishing SAs and SPs by if_id in xfrm_migrate
- xfrm: fix xfrm_migrate issues when address family changes
- dcb: flush lingering app table entries for unregistered devices
- smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error
- mac80211: fix EAPoL rekey fail in 802.3 rx path
- mac80211: fix forwarded mesh frames AC & queue selection
- netfilter: nf_queue: fix socket access races and bugs
- batman-adv: fix ToCToU iflink problems and check the result belongs
to the expected net namespace
- can: gs_usb, etas_es58x: fix opened_channel_cnt's accounting
- can: rcar_canfd: register the CAN device when fully ready
- eth: igb, igc: phy: drop premature return leaking HW semaphore
- eth: ixgbe: xsk: change !netif_carrier_ok() handling in
ixgbe_xmit_zc(), prevent live lock when link goes down
- eth: stmmac: only enable DMA interrupts when ready
- eth: sparx5: move vlan checks before any changes are made
- eth: iavf: fix races around init, removal, resets and vlan ops
- ibmvnic: more reset flow fixes
Misc:
- eth: fix return value of __setup handlers"
* tag 'net-5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
ipv6: fix skb drops in igmp6_event_query() and igmp6_event_report()
net: dsa: make dsa_tree_change_tag_proto actually unwind the tag proto change
ixgbe: xsk: change !netif_carrier_ok() handling in ixgbe_xmit_zc()
selftests: mlxsw: resource_scale: Fix return value
selftests: mlxsw: tc_police_scale: Make test more robust
net: dcb: disable softirqs in dcbnl_flush_dev()
bnx2: Fix an error message
sfc: extend the locking on mcdi->seqno
net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error cause by server
net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error generated by client
net: arcnet: com20020: Fix null-ptr-deref in com20020pci_probe()
tcp: make tcp_read_sock() more robust
bpf, sockmap: Do not ignore orig_len parameter
net: ipa: add an interconnect dependency
net: fix up skbs delta_truesize in UDP GRO frag_list
iwlwifi: mvm: return value for request_ownership
nl80211: Update bss channel on channel switch for P2P_CLIENT
iwlwifi: fix build error for IWLMEI
ptp: ocp: Add ptp_ocp_adjtime_coarse for large adjustments
batman-adv: Don't expect inter-netns unique iflink indices
...
Linus Torvalds [Thu, 3 Mar 2022 18:38:28 +0000 (10:38 -0800)]
Merge tag 'mips-fixes-5.17_4' of git://git./linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- Fix memory detection for MT7621 devices
- Fix setnocoherentio kernel option
- Fix warning when CONFIG_SCHED_CORE is enabled
* tag 'mips-fixes-5.17_4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: ralink: mt7621: use bitwise NOT instead of logical
mips: setup: fix setnocoherentio() boolean setting
MIPS: smp: fill in sibling and core maps earlier
MIPS: ralink: mt7621: do memory detection on KSEG1
Linus Torvalds [Thu, 3 Mar 2022 18:31:09 +0000 (10:31 -0800)]
Merge tag 'auxdisplay-for-linus-v5.17-rc7' of git://github.com/ojeda/linux
Pull auxdisplay fixes from Miguel Ojeda:
"A few lcd2s fixes from Andy Shevchenko"
* tag 'auxdisplay-for-linus-v5.17-rc7' of git://github.com/ojeda/linux:
auxdisplay: lcd2s: Use proper API to free the instance of charlcd object
auxdisplay: lcd2s: Fix memory leak in ->remove()
auxdisplay: lcd2s: Fix lcd2s_redefine_char() feature
Eric Dumazet [Thu, 3 Mar 2022 17:37:28 +0000 (09:37 -0800)]
ipv6: fix skb drops in igmp6_event_query() and igmp6_event_report()
While investigating on why a synchronize_net() has been added recently
in ipv6_mc_down(), I found that igmp6_event_query() and igmp6_event_report()
might drop skbs in some cases.
Discussion about removing synchronize_net() from ipv6_mc_down()
will happen in a different thread.
Fixes:
f185de28d9ae ("mld: add new workqueues for process mld events")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220303173728.937869-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Thu, 3 Mar 2022 15:42:49 +0000 (17:42 +0200)]
net: dsa: make dsa_tree_change_tag_proto actually unwind the tag proto change
The blamed commit said one thing but did another. It explains that we
should restore the "return err" to the original "goto out_unwind_tagger",
but instead it replaced it with "goto out_unlock".
When DSA_NOTIFIER_TAG_PROTO fails after the first switch of a
multi-switch tree, the switches would end up not using the same tagging
protocol.
Fixes:
0b0e2ff10356 ("net: dsa: restore error path of dsa_tree_change_tag_proto")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220303154249.1854436-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maciej Fijalkowski [Wed, 2 Mar 2022 17:59:27 +0000 (09:59 -0800)]
ixgbe: xsk: change !netif_carrier_ok() handling in ixgbe_xmit_zc()
Commit
c685c69fba71 ("ixgbe: don't do any AF_XDP zero-copy transmit if
netif is not OK") addressed the ring transient state when
MEM_TYPE_XSK_BUFF_POOL was being configured which in turn caused the
interface to through down/up. Maurice reported that when carrier is not
ok and xsk_pool is present on ring pair, ksoftirqd will consume 100% CPU
cycles due to the constant NAPI rescheduling as ixgbe_poll() states that
there is still some work to be done.
To fix this, do not set work_done to false for a !netif_carrier_ok().
Fixes:
c685c69fba71 ("ixgbe: don't do any AF_XDP zero-copy transmit if netif is not OK")
Reported-by: Maurice Baijens <maurice.baijens@ellips.com>
Tested-by: Maurice Baijens <maurice.baijens@ellips.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 3 Mar 2022 16:14:04 +0000 (08:14 -0800)]
Merge branch 'selftests-mlxsw-a-couple-of-fixes'
Ido Schimmel says:
====================
selftests: mlxsw: A couple of fixes
Patch #1 fixes a breakage due to a change in iproute2 output. The real
problem is not iproute2, but the fact that the check was not strict
enough. Fixed by using JSON output instead. Targeting at net so that the
test will pass as part of old and new kernels regardless of iproute2
version.
Patch #2 fixes an issue uncovered by the first one.
====================
Link: https://lore.kernel.org/r/20220302161447.217447-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Amit Cohen [Wed, 2 Mar 2022 16:14:47 +0000 (18:14 +0200)]
selftests: mlxsw: resource_scale: Fix return value
The test runs several test cases and is supposed to return an error in
case at least one of them failed.
Currently, the check of the return value of each test case is in the
wrong place, which can result in the wrong return value. For example:
# TESTS='tc_police' ./resource_scale.sh
TEST: 'tc_police' [default] 968 [FAIL]
tc police offload count failed
Error: mlxsw_spectrum: Failed to allocate policer index.
We have an error talking to the kernel
Command failed /tmp/tmp.i7Oc5HwmXY:969
TEST: 'tc_police' [default] overflow 969 [ OK ]
...
TEST: 'tc_police' [ipv4_max] overflow 969 [ OK ]
$ echo $?
0
Fix this by moving the check to be done after each test case.
Fixes:
059b18e21c63 ("selftests: mlxsw: Return correct error code in resource scale test")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Amit Cohen [Wed, 2 Mar 2022 16:14:46 +0000 (18:14 +0200)]
selftests: mlxsw: tc_police_scale: Make test more robust
The test adds tc filters and checks how many of them were offloaded by
grepping for 'in_hw'.
iproute2 commit
f4cd4f127047 ("tc: add skip_hw and skip_sw to control
action offload") added offload indication to tc actions, producing the
following output:
$ tc filter show dev swp2 ingress
...
filter protocol ipv6 pref 1000 flower chain 0 handle 0x7c0
eth_type ipv6
dst_ip 2001:db8:1::7bf
skip_sw
in_hw in_hw_count 1
action order 1: police 0x7c0 rate 10Mbit burst 100Kb mtu 2Kb action drop overhead 0b
ref 1 bind 1
not_in_hw
used_hw_stats immediate
The current grep expression matches on both 'in_hw' and 'not_in_hw',
resulting in incorrect results.
Fix that by using JSON output instead.
Fixes:
5061e773264b ("selftests: mlxsw: Add scale test for tc-police")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Wed, 2 Mar 2022 19:39:39 +0000 (21:39 +0200)]
net: dcb: disable softirqs in dcbnl_flush_dev()
Ido Schimmel points out that since commit
52cff74eef5d ("dcbnl : Disable
software interrupts before taking dcb_lock"), the DCB API can be called
by drivers from softirq context.
One such in-tree example is the chelsio cxgb4 driver:
dcb_rpl
-> cxgb4_dcb_handle_fw_update
-> dcb_ieee_setapp
If the firmware for this driver happened to send an event which resulted
in a call to dcb_ieee_setapp() at the exact same time as another
DCB-enabled interface was unregistering on the same CPU, the softirq
would deadlock, because the interrupted process was already holding the
dcb_lock in dcbnl_flush_dev().
Fix this unlikely event by using spin_lock_bh() in dcbnl_flush_dev() as
in the rest of the dcbnl code.
Fixes:
91b0383fef06 ("net: dcb: flush lingering app table entries for unregistered devices")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220302193939.1368823-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christophe JAILLET [Wed, 2 Mar 2022 20:21:15 +0000 (21:21 +0100)]
bnx2: Fix an error message
Fix an error message and report the correct failing function.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Niels Dossche [Tue, 1 Mar 2022 22:28:22 +0000 (23:28 +0100)]
sfc: extend the locking on mcdi->seqno
seqno could be read as a stale value outside of the lock. The lock is
already acquired to protect the modification of seqno against a possible
race condition. Place the reading of this value also inside this locking
to protect it against a possible race condition.
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Luiz Augusto von Dentz [Wed, 2 Mar 2022 21:02:45 +0000 (13:02 -0800)]
Bluetooth: hci_sync: Fix not processing all entries on cmd_sync_work
hci_cmd_sync_queue can be called multiple times, each adding a
hci_cmd_sync_work_entry, before hci_cmd_sync_work is run so this makes
sure they are all dequeued properly otherwise it creates a backlog of
entries that are never run.
Link: https://lore.kernel.org/all/CAJCQCtSeUtHCgsHXLGrSTWKmyjaQDbDNpP4rb0i+RE+L2FTXSA@mail.gmail.com/T/
Fixes:
6a98e3836fa20 ("Bluetooth: Add helper for serialized HCI command execution")
Tested-by: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Hans de Goede [Wed, 2 Mar 2022 13:44:39 +0000 (14:44 +0100)]
Bluetooth: hci_core: Fix unbalanced unlock in set_device_flags()
There is only one "goto done;" in set_device_flags() and this happens
*before* hci_dev_lock() is called, move the done label to after the
hci_dev_unlock() to fix the following unlock balance:
[ 31.493567] =====================================
[ 31.493571] WARNING: bad unlock balance detected!
[ 31.493576] 5.17.0-rc2+ #13 Tainted: G C E
[ 31.493581] -------------------------------------
[ 31.493584] bluetoothd/685 is trying to release lock (&hdev->lock) at:
[ 31.493594] [<
ffffffffc07603f5>] set_device_flags+0x65/0x1f0 [bluetooth]
[ 31.493684] but there are no more locks to release!
Note this bug has been around for a couple of years, but before
commit
fe92ee6425a2 ("Bluetooth: hci_core: Rework hci_conn_params flags")
supported_flags was hardcoded to "((1U << HCI_CONN_FLAG_MAX) - 1)" so
the check for unsupported flags which does the "goto done;" never
triggered.
Fixes:
fe92ee6425a2 ("Bluetooth: hci_core: Rework hci_conn_params flags")
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
David S. Miller [Thu, 3 Mar 2022 10:34:18 +0000 (10:34 +0000)]
Merge branch 'smc-fix'
D. Wythe says:
====================
fix unexpected SMC_CLC_DECL_ERR_REGRMB error
We can easily trigger the SMC_CLC_DECL_ERR_REGRMB exception within
following script:
server: smc_run nginx
client: smc_run ./wrk -c 2000 -t 8 -d 20 http://smc-server
And we can clearly see that this error is also divided into two types:
1. 0x09990003
2. 0x05000000/0x09990003
Which has the same root causes, but the immediate causes vary.
The root cause of this issues is that remove connections from link group
is not synchronous with add/delete rtoken entry, which means that even
the number of connections is less that SMC_RMBS_PER_LGR_MAX, it does not
mean that the connection can register rtoken successfully later. In
other words, the rtoken entry may released, This will cause an
unexpected SMC_CLC_DECL_ERR_REGRMB to be reported, and then this SMC
connections have to fallback to TCP.
This patch set handles two types of SMC_CLC_DECL_ERR_REGRMB exceptions
from different perspectives.
Patch 1: fix the 0x05000000/0x09990003 error.
Patch 2: fix the 0x09990003 error.
After those patches, there is no SMC_CLC_DECL_ERR_REGRMB exceptions in
my
test case any more.
v1 -> v2:
- add bugfix patch for SMC_CLC_DECL_ERR_REGRMB cause by server side
v2 -> v3:
- fix incorrect mail thread
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
D. Wythe [Wed, 2 Mar 2022 13:25:12 +0000 (21:25 +0800)]
net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error cause by server
The problem of SMC_CLC_DECL_ERR_REGRMB on the server is very clear.
Based on the fact that whether a new SMC connection can be accepted or
not depends on not only the limit of conn nums, but also the available
entries of rtoken. Since the rtoken release is trigger by peer, while
the conn nums is decrease by local, tons of thing can happen in this
time difference.
This only thing that needs to be mentioned is that now all connection
creations are completely protected by smc_server_lgr_pending lock, it's
enough to check only the available entries in rtokens_used_mask.
Fixes:
cd6851f30386 ("smc: remote memory buffers (RMBs)")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
D. Wythe [Wed, 2 Mar 2022 13:25:11 +0000 (21:25 +0800)]
net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error generated by client
The main reason for this unexpected SMC_CLC_DECL_ERR_REGRMB in client
dues to following execution sequence:
Server Conn A: Server Conn B: Client Conn B:
smc_lgr_unregister_conn
smc_lgr_register_conn
smc_clc_send_accept ->
smc_rtoken_add
smcr_buf_unuse
-> Client Conn A:
smc_rtoken_delete
smc_lgr_unregister_conn() makes current link available to assigned to new
incoming connection, while smcr_buf_unuse() has not executed yet, which
means that smc_rtoken_add may fail because of insufficient rtoken_entry,
reversing their execution order will avoid this problem.
Fixes:
3e034725c0d8 ("net/smc: common functions for RMBs and send buffers")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheyu Ma [Wed, 2 Mar 2022 12:24:23 +0000 (20:24 +0800)]
net: arcnet: com20020: Fix null-ptr-deref in com20020pci_probe()
During driver initialization, the pointer of card info, i.e. the
variable 'ci' is required. However, the definition of
'com20020pci_id_table' reveals that this field is empty for some
devices, which will cause null pointer dereference when initializing
these devices.
The following log reveals it:
[ 3.973806] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
[ 3.973819] RIP: 0010:com20020pci_probe+0x18d/0x13e0 [com20020_pci]
[ 3.975181] Call Trace:
[ 3.976208] local_pci_probe+0x13f/0x210
[ 3.977248] pci_device_probe+0x34c/0x6d0
[ 3.977255] ? pci_uevent+0x470/0x470
[ 3.978265] really_probe+0x24c/0x8d0
[ 3.978273] __driver_probe_device+0x1b3/0x280
[ 3.979288] driver_probe_device+0x50/0x370
Fix this by checking whether the 'ci' is a null pointer first.
Fixes:
8c14f9c70327 ("ARCNET: add com20020 PCI IDs with metadata")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 2 Mar 2022 16:17:23 +0000 (08:17 -0800)]
tcp: make tcp_read_sock() more robust
If recv_actor() returns an incorrect value, tcp_read_sock()
might loop forever.
Instead, issue a one time warning and make sure to make progress.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20220302161723.3910001-2-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 2 Mar 2022 16:17:22 +0000 (08:17 -0800)]
bpf, sockmap: Do not ignore orig_len parameter
Currently, sk_psock_verdict_recv() returns skb->len
This is problematic because tcp_read_sock() might have
passed orig_len < skb->len, due to the presence of TCP urgent data.
This causes an infinite loop from tcp_read_sock()
Followup patch will make tcp_read_sock() more robust vs bad actors.
Fixes:
ef5659280eb1 ("bpf, sockmap: Allow skipping sk_skb parser program")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20220302161723.3910001-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Tue, 1 Mar 2022 11:34:40 +0000 (05:34 -0600)]
net: ipa: add an interconnect dependency
In order to function, the IPA driver very clearly requires the
interconnect framework to be enabled in the kernel configuration.
State that dependency in the Kconfig file.
This became a problem when CONFIG_COMPILE_TEST support was added.
Non-Qualcomm platforms won't necessarily enable CONFIG_INTERCONNECT.
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
38a4066f593c5 ("net: ipa: support COMPILE_TEST")
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220301113440.257916-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
lena wang [Tue, 1 Mar 2022 11:17:09 +0000 (19:17 +0800)]
net: fix up skbs delta_truesize in UDP GRO frag_list
The truesize for a UDP GRO packet is added by main skb and skbs in main
skb's frag_list:
skb_gro_receive_list
p->truesize += skb->truesize;
The commit
53475c5dd856 ("net: fix use-after-free when UDP GRO with
shared fraglist") introduced a truesize increase for frag_list skbs.
When uncloning skb, it will call pskb_expand_head and trusesize for
frag_list skbs may increase. This can occur when allocators uses
__netdev_alloc_skb and not jump into __alloc_skb. This flow does not
use ksize(len) to calculate truesize while pskb_expand_head uses.
skb_segment_list
err = skb_unclone(nskb, GFP_ATOMIC);
pskb_expand_head
if (!skb->sk || skb->destructor == sock_edemux)
skb->truesize += size - osize;
If we uses increased truesize adding as delta_truesize, it will be
larger than before and even larger than previous total truesize value
if skbs in frag_list are abundant. The main skb truesize will become
smaller and even a minus value or a huge value for an unsigned int
parameter. Then the following memory check will drop this abnormal skb.
To avoid this error we should use the original truesize to segment the
main skb.
Fixes:
53475c5dd856 ("net: fix use-after-free when UDP GRO with shared fraglist")
Signed-off-by: lena wang <lena.wang@mediatek.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1646133431-8948-1-git-send-email-lena.wang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 3 Mar 2022 05:53:34 +0000 (21:53 -0800)]
Merge tag 'batadv-net-pullrequest-
20220302' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- Remove redundant iflink requests, by Sven Eckelmann (2 patches)
- Don't expect inter-netns unique iflink indices, by Sven Eckelmann
* tag 'batadv-net-pullrequest-
20220302' of git://git.open-mesh.org/linux-merge:
batman-adv: Don't expect inter-netns unique iflink indices
batman-adv: Request iflink once in batadv_get_real_netdevice
batman-adv: Request iflink once in batadv-on-batadv check
====================
Link: https://lore.kernel.org/r/20220302163049.101957-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 3 Mar 2022 05:49:57 +0000 (21:49 -0800)]
Merge tag 'wireless-for-net-2022-03-02' of git://git./linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Three more fixes:
- fix build issue in iwlwifi, now that I understood
what's going on there
- propagate error in iwlwifi/mvm to userspace so it
can figure out what's happening
- fix channel switch related updates in P2P-client
in cfg80211
* tag 'wireless-for-net-2022-03-02' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
iwlwifi: mvm: return value for request_ownership
nl80211: Update bss channel on channel switch for P2P_CLIENT
iwlwifi: fix build error for IWLMEI
====================
Link: https://lore.kernel.org/r/20220302214444.100180-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 3 Mar 2022 00:20:04 +0000 (16:20 -0800)]
Merge branch 'ucount-rlimit-fixes-for-v5.17' of git://git./linux/kernel/git/ebiederm/user-namespace
Pull ucounts fix from Eric Biederman:
"Etienne Dechamps recently found a regression caused by enforcing
RLIMIT_NPROC for root where the rlimit was not previously enforced.
Michal Koutný had previously pointed out the inconsistency in
enforcing the RLIMIT_NPROC that had been on the root owned process
after the root user creates a user namespace.
Which makes the fix for the regression simply removing the
inconsistency"
* 'ucount-rlimit-fixes-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ucounts: Fix systemd LimitNPROC with private users regression
Linus Torvalds [Thu, 3 Mar 2022 00:11:56 +0000 (16:11 -0800)]
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
- Fix kgdb breakpoint for Thumb2
- Fix dependency for BITREVERSE kconfig
- Fix nommu early_params and __setup returns
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9182/1: mmu: fix returns from early_param() and __setup() functions
ARM: 9178/1: fix unmet dependency on BITREVERSE for HAVE_ARCH_BITREVERSE
ARM: Fix kgdb breakpoint for Thumb2
Andy Shevchenko [Wed, 23 Feb 2022 15:47:18 +0000 (17:47 +0200)]
auxdisplay: lcd2s: Use proper API to free the instance of charlcd object
While it might work, the current approach is fragile in a few ways:
- whenever members in the structure are shuffled, the pointer will be wrong
- the resource freeing may include more than covered by kfree()
Fix this by using charlcd_free() call instead of kfree().
Fixes:
8c9108d014c5 ("auxdisplay: add a driver for lcd2s character display")
Cc: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Andy Shevchenko [Wed, 23 Feb 2022 15:47:17 +0000 (17:47 +0200)]
auxdisplay: lcd2s: Fix memory leak in ->remove()
Once allocated the struct lcd2s_data is never freed.
Fix the memory leak by switching to devm_kzalloc().
Fixes:
8c9108d014c5 ("auxdisplay: add a driver for lcd2s character display")
Cc: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Andy Shevchenko [Wed, 23 Feb 2022 15:47:16 +0000 (17:47 +0200)]
auxdisplay: lcd2s: Fix lcd2s_redefine_char() feature
It seems that the lcd2s_redefine_char() has never been properly
tested. The buffer is filled by DEF_CUSTOM_CHAR command followed
by the character number (from 0 to 7), but immediately after that
these bytes are rewritten by the decoded hex stream.
Fix the index to fill the buffer after the command and number.
Fixes:
8c9108d014c5 ("auxdisplay: add a driver for lcd2s character display")
Cc: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
[fixed typo in commit message]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Emmanuel Grumbach [Wed, 2 Mar 2022 07:27:15 +0000 (09:27 +0200)]
iwlwifi: mvm: return value for request_ownership
Propagate the value to the user space so it can understand
if the operation failed or not.
Fixes:
bfcfdb59b669 ("iwlwifi: mvm: add vendor commands needed for iwlmei")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://lore.kernel.org/r/20220302072715.4885-1-emmanuel.grumbach@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Sreeramya Soratkal [Tue, 1 Mar 2022 06:03:20 +0000 (11:33 +0530)]
nl80211: Update bss channel on channel switch for P2P_CLIENT
The wdev channel information is updated post channel switch only for
the station mode and not for the other modes. Due to this, the P2P client
still points to the old value though it moved to the new channel
when the channel change is induced from the P2P GO.
Update the bss channel after CSA channel switch completion for P2P client
interface as well.
Signed-off-by: Sreeramya Soratkal <quic_ssramya@quicinc.com>
Link: https://lore.kernel.org/r/1646114600-31479-1-git-send-email-quic_ssramya@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Randy Dunlap [Sun, 27 Feb 2022 20:00:51 +0000 (12:00 -0800)]
iwlwifi: fix build error for IWLMEI
When CONFIG_IWLWIFI=m and CONFIG_IWLMEI=y, the kernel build system
must be told to build the iwlwifi/ subdirectory for both IWLWIFI and
IWLMEI so that builds for both =y and =m are done.
This resolves an undefined reference build error:
ERROR: modpost: "iwl_mei_is_connected" [drivers/net/wireless/intel/iwlwifi/iwlwifi.ko] undefined!
Fixes:
977df8bd5844 ("wlwifi: work around reverse dependency on MEI")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: linux-wireless@vger.kernel.org
Link: https://lore.kernel.org/r/20220227200051.7176-1-rdunlap@infradead.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Linus Torvalds [Wed, 2 Mar 2022 20:08:36 +0000 (12:08 -0800)]
Merge tag 'erofs-for-5.17-rc7-fixes' of git://git./linux/kernel/git/xiang/erofs
Pull erofs fix from Gao Xiang:
"A one-line patch to fix the new ztailpacking feature on > 4GiB
filesystems because z_idataoff can get trimmed improperly.
ztailpacking is still a brand new EXPERIMENTAL feature, but it'd be
better to fix the issue as soon as possible to avoid unnecessary
backporting.
Summary:
- Fix ztailpacking z_idataoff getting trimmed on > 4GiB filesystems"
* tag 'erofs-for-5.17-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix ztailpacking on > 4GiB filesystems
Linus Torvalds [Wed, 2 Mar 2022 19:58:27 +0000 (11:58 -0800)]
Merge tag 'ntb-5.17-bugfixes' of git://github.com/jonmason/ntb
Pull NTB fixes from Jon Mason:
"Bug fixes for sparse warning, intel port config offset, and a new
mailing list"
* tag 'ntb-5.17-bugfixes' of git://github.com/jonmason/ntb:
MAINTAINERS: update mailing list address for NTB subsystem
ntb: intel: fix port config status offset for SPR
NTB/msi: Use struct_size() helper in devm_kzalloc()
Jonathan Lemon [Mon, 28 Feb 2022 20:39:57 +0000 (12:39 -0800)]
ptp: ocp: Add ptp_ocp_adjtime_coarse for large adjustments
In ("ptp: ocp: Have FPGA fold in ns adjustment for adjtime."), the
ns adjustment was written to the FPGA register, so the clock could
accurately perform adjustments.
However, the adjtime() call passes in a s64, while the clock adjustment
registers use a s32. When trying to perform adjustments with a large
value (37 sec), things fail.
Examine the incoming delta, and if larger than 1 sec, use the original
(coarse) adjustment method. If smaller than 1 sec, then allow the
FPGA to fold in the changes over a 1 second window.
Fixes:
6d59d4fa1789 ("ptp: ocp: Have FPGA fold in ns adjustment for adjtime.")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20220228203957.367371-1-jonathan.lemon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gao Xiang [Tue, 22 Feb 2022 03:31:18 +0000 (11:31 +0800)]
erofs: fix ztailpacking on > 4GiB filesystems
z_idataoff here is an absolute physical offset, so it should use
erofs_off_t (64 bits at least). Otherwise, it'll get trimmed and
cause the decompresion failure.
Link: https://lore.kernel.org/r/20220222033118.20540-1-hsiangkao@linux.alibaba.com
Fixes:
ab92184ff8f1 ("erofs: add on-disk compressed tail-packing inline support")
Reviewed-by: Yue Hu <huyue2@yulong.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Sven Eckelmann [Sun, 27 Feb 2022 22:23:49 +0000 (23:23 +0100)]
batman-adv: Don't expect inter-netns unique iflink indices
The ifindex doesn't have to be unique for multiple network namespaces on
the same machine.
$ ip netns add test1
$ ip -net test1 link add dummy1 type dummy
$ ip netns add test2
$ ip -net test2 link add dummy2 type dummy
$ ip -net test1 link show dev dummy1
6: dummy1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 96:81:55:1e:dd:85 brd ff:ff:ff:ff:ff:ff
$ ip -net test2 link show dev dummy2
6: dummy2: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 5a:3c:af:35:07:c3 brd ff:ff:ff:ff:ff:ff
But the batman-adv code to walk through the various layers of virtual
interfaces uses this assumption because dev_get_iflink handles it
internally and doesn't return the actual netns of the iflink. And
dev_get_iflink only documents the situation where ifindex == iflink for
physical devices.
But only checking for dev->netdev_ops->ndo_get_iflink is also not an option
because ipoib_get_iflink implements it even when it sometimes returns an
iflink != ifindex and sometimes iflink == ifindex. The caller must
therefore make sure itself to check both netns and iflink + ifindex for
equality. Only when they are equal, a "physical" interface was detected
which should stop the traversal. On the other hand, vxcan_get_iflink can
also return 0 in case there was currently no valid peer. In this case, it
is still necessary to stop.
Fixes:
b7eddd0b3950 ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface")
Fixes:
5ed4a460a1d3 ("batman-adv: additional checks for virtual interfaces on top of WiFi")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Sven Eckelmann [Sun, 27 Feb 2022 23:01:24 +0000 (00:01 +0100)]
batman-adv: Request iflink once in batadv_get_real_netdevice
There is no need to call dev_get_iflink multiple times for the same
net_device in batadv_get_real_netdevice. And since some of the
ndo_get_iflink callbacks are dynamic (for example via RCUs like in
vxcan_get_iflink), it could easily happen that the returned values are not
stable. The pre-checks before __dev_get_by_index are then of course bogus.
Fixes:
5ed4a460a1d3 ("batman-adv: additional checks for virtual interfaces on top of WiFi")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Sven Eckelmann [Sun, 27 Feb 2022 23:01:24 +0000 (00:01 +0100)]
batman-adv: Request iflink once in batadv-on-batadv check
There is no need to call dev_get_iflink multiple times for the same
net_device in batadv_is_on_batman_iface. And since some of the
.ndo_get_iflink callbacks are dynamic (for example via RCUs like in
vxcan_get_iflink), it could easily happen that the returned values are not
stable. The pre-checks before __dev_get_by_index are then of course bogus.
Fixes:
b7eddd0b3950 ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Vladimir Oltean [Mon, 28 Feb 2022 14:17:15 +0000 (16:17 +0200)]
net: dsa: restore error path of dsa_tree_change_tag_proto
When the DSA_NOTIFIER_TAG_PROTO returns an error, the user space process
which initiated the protocol change exits the kernel processing while
still holding the rtnl_mutex. So any other process attempting to lock
the rtnl_mutex would deadlock after such event.
The error handling of DSA_NOTIFIER_TAG_PROTO was inadvertently changed
by the blamed commit, introducing this regression. We must still call
rtnl_unlock(), and we must still call DSA_NOTIFIER_TAG_PROTO for the old
protocol. The latter is due to the limiting design of notifier chains
for cross-chip operations, which don't have a built-in error recovery
mechanism - we should look into using notifier_call_chain_robust for that.
Fixes:
dc452a471dba ("net: dsa: introduce tagger-owned storage for private and shared data")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220228141715.146485-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 2 Mar 2022 01:16:46 +0000 (17:16 -0800)]
Merge tag 'for-net-2022-03-01' of git://git./linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix regression with scanning not working in some systems.
* tag 'for-net-2022-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: Fix not checking MGMT cmd pending queue
====================
Link: https://lore.kernel.org/r/20220302004330.125536-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Brian Gix [Tue, 1 Mar 2022 22:34:57 +0000 (14:34 -0800)]
Bluetooth: Fix not checking MGMT cmd pending queue
A number of places in the MGMT handlers we examine the command queue for
other commands (in progress but not yet complete) that will interact
with the process being performed. However, not all commands go into the
queue if one of:
1. There is no negative side effect of consecutive or redundent commands
2. The command is entirely perform "inline".
This change examines each "pending command" check, and if it is not
needed, deletes the check. Of the remaining pending command checks, we
make sure that the command is in the pending queue by using the
mgmt_pending_add/mgmt_pending_remove pair rather than the
mgmt_pending_new/mgmt_pending_free pair.
Link: https://lore.kernel.org/linux-bluetooth/f648f2e11bb3c2974c32e605a85ac3a9fac944f1.camel@redhat.com/T/
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Jakub Kicinski [Tue, 1 Mar 2022 23:13:46 +0000 (15:13 -0800)]
Merge git://git./linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Use kfree_rcu(ptr, rcu) variant, using kfree_rcu(ptr) was not
intentional. From Eric Dumazet.
2) Use-after-free in netfilter hook core, from Eric Dumazet.
3) Missing rcu read lock side for netfilter egress hook,
from Florian Westphal.
4) nf_queue assume state->sk is full socket while it might not be.
Invoke sock_gen_put(), from Florian Westphal.
5) Add selftest to exercise the reported KASAN splat in 4)
6) Fix possible use-after-free in nf_queue in case sk_refcnt is 0.
Also from Florian.
7) Use input interface index only for hardware offload, not for
the software plane. This breaks tc ct action. Patch from Paul Blakey.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
net/sched: act_ct: Fix flow table lookup failure with no originating ifindex
netfilter: nf_queue: handle socket prefetch
netfilter: nf_queue: fix possible use-after-free
selftests: netfilter: add nfqueue TCP_NEW_SYN_RECV socket race test
netfilter: nf_queue: don't assume sk is full socket
netfilter: egress: silence egress hook lockdep splats
netfilter: fix use-after-free in __nf_register_net_hook()
netfilter: nf_tables: prefer kfree_rcu(ptr, rcu) variant
====================
Link: https://lore.kernel.org/r/20220301215337.378405-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paul Blakey [Mon, 28 Feb 2022 09:23:49 +0000 (11:23 +0200)]
net/sched: act_ct: Fix flow table lookup failure with no originating ifindex
After cited commit optimizted hw insertion, flow table entries are
populated with ifindex information which was intended to only be used
for HW offload. This tuple ifindex is hashed in the flow table key, so
it must be filled for lookup to be successful. But tuple ifindex is only
relevant for the netfilter flowtables (nft), so it's not filled in
act_ct flow table lookup, resulting in lookup failure, and no SW
offload and no offload teardown for TCP connection FIN/RST packets.
To fix this, add new tc ifindex field to tuple, which will
only be used for offloading, not for lookup, as it will not be
part of the tuple hash.
Fixes:
9795ded7f924 ("net/sched: act_ct: Fill offloading tuple iifidx")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Linus Torvalds [Tue, 1 Mar 2022 20:01:18 +0000 (12:01 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"The bigger part of the change is a revert for x86 hosts. Here the
second patch was supposed to fix the first, but in reality it was just
as broken, so both have to go.
x86 host:
- Revert incorrect assumption that cr3 changes come with preempt
notifier callbacks (they don't when static branches are changed,
for example)
ARM host:
- Correctly synchronise PMR and co on PSCI CPU_SUSPEND
- Skip tests that depend on GICv3 when the HW isn't available"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: aarch64: Skip tests if we can't create a vgic-v3
Revert "KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()"
Revert "KVM: VMX: Save HOST_CR3 in vmx_set_host_fs_gs()"
KVM: arm64: Don't miss pending interrupts for suspended vCPU
Linus Torvalds [Tue, 1 Mar 2022 19:31:37 +0000 (11:31 -0800)]
Merge tag 'binfmt_elf-v5.17-rc7' of git://git./linux/kernel/git/kees/linux
Pull binfmt_elf fix from Kees Cook:
"This addresses a regression[1] under ia64 where some ET_EXEC binaries
were not loading"
Link: https://linux-regtracking.leemhuis.info/regzbot/regression/a3edd529-c42d-3b09-135c-7e98a15b150f@leemhuis.info/
- Fix ia64 ET_EXEC loading
* tag 'binfmt_elf-v5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_elf: Avoid total_mapping_size for ET_EXEC
Kees Cook [Mon, 28 Feb 2022 18:59:12 +0000 (10:59 -0800)]
binfmt_elf: Avoid total_mapping_size for ET_EXEC
Partially revert commit
5f501d555653 ("binfmt_elf: reintroduce using
MAP_FIXED_NOREPLACE"), which applied the ET_DYN "total_mapping_size"
logic also to ET_EXEC.
At least ia64 has ET_EXEC PT_LOAD segments that are not virtual-address
contiguous (but _are_ file-offset contiguous). This would result in a
giant mapping attempting to cover the entire span, including the virtual
address range hole, and well beyond the size of the ELF file itself,
causing the kernel to refuse to load it. For example:
$ readelf -lW /usr/bin/gcc
...
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz ...
...
LOAD 0x000000 0x4000000000000000 0x4000000000000000 0x00b5a0 0x00b5a0 ...
LOAD 0x00b5a0 0x600000000000b5a0 0x600000000000b5a0 0x0005ac 0x000710 ...
...
^^^^^^^^ ^^^^^^^^^^^^^^^^^^ ^^^^^^^^ ^^^^^^^^
File offset range : 0x000000-0x00bb4c
0x00bb4c bytes
Virtual address range : 0x4000000000000000-0x600000000000bcb0
0x200000000000bcb0 bytes
Remove the total_mapping_size logic for ET_EXEC, which reduces the
ET_EXEC MAP_FIXED_NOREPLACE coverage to only the first PT_LOAD (better
than nothing), and retains it for ET_DYN.
Ironically, this is the reverse of the problem that originally caused
problems with MAP_FIXED_NOREPLACE: overlapping PT_LOAD segments. Future
work could restore full coverage if load_elf_binary() were to perform
mappings in a separate phase from the loading (where it could resolve
both overlaps and holes).
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-mm@kvack.org
Reported-by: matoro <matoro_bugzilla_kernel@matoro.tk>
Fixes:
5f501d555653 ("binfmt_elf: reintroduce using MAP_FIXED_NOREPLACE")
Link: https://lore.kernel.org/r/a3edd529-c42d-3b09-135c-7e98a15b150f@leemhuis.info
Tested-by: matoro <matoro_mailinglist_kernel@matoro.tk>
Link: https://lore.kernel.org/lkml/ce8af9c13bcea9230c7689f3c1e0e2cd@matoro.tk
Tested-By: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/lkml/49182d0d-708b-4029-da5f-bc18603440a6@physik.fu-berlin.de
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
David S. Miller [Tue, 1 Mar 2022 14:45:55 +0000 (14:45 +0000)]
Merge tag 'wireless-for-net-2022-03-01' of git://git./linux/kernel/git/wireless/wireless
johannes Berg says:
====================
Some last-minute fixes:
* rfkill
- add missing rfill_soft_blocked() when disabled
* cfg80211
- handle a nla_memdup() failure correctly
- fix CONFIG_CFG80211_EXTRA_REGDB_KEYDIR typo in
Makefile
* mac80211
- fix EAPOL handling in 802.3 RX path
- reject setting up aggregation sessions before
connection is authorized to avoid timeouts or
similar
- handle some SAE authentication steps correctly
- fix AC selection in mesh forwarding
* iwlwifi
- remove TWT support as it causes firmware crashes
when the AP isn't behaving correctly
- check debugfs pointer before dereferncing it
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Mon, 21 Feb 2022 14:55:12 +0000 (15:55 +0100)]
cfg80211: fix CONFIG_CFG80211_EXTRA_REGDB_KEYDIR typo
The kbuild change here accidentally removed not only the
unquoting, but also the last character of the variable
name. Fix that.
Fixes:
129ab0d2d9f3 ("kbuild: do not quote string values in include/config/auto.conf")
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20220221155512.1d25895f7c5f.I50fa3d4189fcab90a2896fe8cae215035dae9508@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Lina Wang [Sat, 26 Feb 2022 07:48:01 +0000 (15:48 +0800)]
xfrm: fix tunnel model fragmentation behavior
in tunnel mode, if outer interface(ipv4) is less, it is easily to let
inner IPV6 mtu be less than 1280. If so, a Packet Too Big ICMPV6 message
is received. When send again, packets are fragmentized with 1280, they
are still rejected with ICMPV6(Packet Too Big) by xfrmi_xmit2().
According to RFC4213 Section3.2.2:
if (IPv4 path MTU - 20) is less than 1280
if packet is larger than 1280 bytes
Send ICMPv6 "packet too big" with MTU=1280
Drop packet
else
Encapsulate but do not set the Don't Fragment
flag in the IPv4 header. The resulting IPv4
packet might be fragmented by the IPv4 layer
on the encapsulator or by some router along
the IPv4 path.
endif
else
if packet is larger than (IPv4 path MTU - 20)
Send ICMPv6 "packet too big" with
MTU = (IPv4 path MTU - 20).
Drop packet.
else
Encapsulate and set the Don't Fragment flag
in the IPv4 header.
endif
endif
Packets should be fragmentized with ipv4 outer interface, so change it.
After it is fragemtized with ipv4, there will be double fragmenation.
No.48 & No.51 are ipv6 fragment packets, No.48 is double fragmentized,
then tunneled with IPv4(No.49& No.50), which obey spec. And received peer
cannot decrypt it rightly.
48 2002::10 2002::11 1296(length) IPv6 fragment (off=0 more=y ident=0xa20da5bc nxt=50)
49 0x0000 (0) 2002::10 2002::11 1304 IPv6 fragment (off=0 more=y ident=0x7448042c nxt=44)
50 0x0000 (0) 2002::10 2002::11 200 ESP (SPI=0x00035000)
51 2002::10 2002::11 180 Echo (ping) request
52 0x56dc 2002::10 2002::11 248 IPv6 fragment (off=1232 more=n ident=0xa20da5bc nxt=50)
xfrm6_noneed_fragment has fixed above issues. Finally, it acted like below:
1 0x6206 192.168.1.138 192.168.1.1 1316 Fragmented IP protocol (proto=Encap Security Payload 50, off=0, ID=6206) [Reassembled in #2]
2 0x6206 2002::10 2002::11 88 IPv6 fragment (off=0 more=y ident=0x1f440778 nxt=50)
3 0x0000 2002::10 2002::11 248 ICMPv6 Echo (ping) request
Signed-off-by: Lina Wang <lina.wang@mediatek.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Florian Westphal [Mon, 28 Feb 2022 23:46:19 +0000 (00:46 +0100)]
netfilter: nf_queue: handle socket prefetch
In case someone combines bpf socket assign and nf_queue, then we will
queue an skb who references a struct sock that did not have its
reference count incremented.
As we leave rcu protection, there is no guarantee that skb->sk is still
valid.
For refcount-less skb->sk case, try to increment the reference count
and then override the destructor.
In case of failure we have two choices: orphan the skb and 'delete'
preselect or let nf_queue() drop the packet.
Do the latter, it should not happen during normal operation.
Fixes:
cf7fbe660f2d ("bpf: Add socket assign support")
Acked-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Florian Westphal <fw@strlen.de>
Florian Westphal [Mon, 28 Feb 2022 05:22:22 +0000 (06:22 +0100)]
netfilter: nf_queue: fix possible use-after-free
Eric Dumazet says:
The sock_hold() side seems suspect, because there is no guarantee
that sk_refcnt is not already 0.
On failure, we cannot queue the packet and need to indicate an
error. The packet will be dropped by the caller.
v2: split skb prefetch hunk into separate change
Fixes:
271b72c7fa82c ("udp: RCU handling for Unicast packets.")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Florian Westphal [Fri, 25 Feb 2022 11:01:23 +0000 (12:01 +0100)]
selftests: netfilter: add nfqueue TCP_NEW_SYN_RECV socket race test
causes:
BUG: KASAN: slab-out-of-bounds in sk_free+0x25/0x80
Write of size 4 at addr
ffff888106df0284 by task nf-queue/1459
sk_free+0x25/0x80
nf_queue_entry_release_refs+0x143/0x1a0
nf_reinject+0x233/0x770
... without 'netfilter: nf_queue: don't assume sk is full socket'.
Signed-off-by: Florian Westphal <fw@strlen.de>
Florian Westphal [Fri, 25 Feb 2022 13:02:41 +0000 (14:02 +0100)]
netfilter: nf_queue: don't assume sk is full socket
There is no guarantee that state->sk refers to a full socket.
If refcount transitions to 0, sock_put calls sk_free which then ends up
with garbage fields.
I'd like to thank Oleksandr Natalenko and Jiri Benc for considerable
debug work and pointing out state->sk oddities.
Fixes:
ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener")
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Johannes Berg [Thu, 24 Feb 2022 09:39:34 +0000 (10:39 +0100)]
mac80211: treat some SAE auth steps as final
When we get anti-clogging token required (added by the commit
mentioned below), or the other status codes added by the later
commit
4e56cde15f7d ("mac80211: Handle special status codes in
SAE commit") we currently just pretend (towards the internal
state machine of authentication) that we didn't receive anything.
This has the undesirable consequence of retransmitting the prior
frame, which is not expected, because the timer is still armed.
If we just disarm the timer at that point, it would result in
the undesirable side effect of being in this state indefinitely
if userspace crashes, or so.
So to fix this, reset the timer and set a new auth_data->waiting
in order to have no more retransmissions, but to have the data
destroyed when the timer actually fires, which will only happen
if userspace didn't continue (i.e. crashed or abandoned it.)
Fixes:
a4055e74a2ff ("mac80211: Don't destroy auth data in case of anti-clogging")
Reported-by: Jouni Malinen <j@w1.fi>
Link: https://lore.kernel.org/r/20220224103932.75964e1d7932.Ia487f91556f29daae734bf61f8181404642e1eec@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jiasheng Jiang [Tue, 1 Mar 2022 10:00:20 +0000 (18:00 +0800)]
nl80211: Handle nla_memdup failures in handle_nan_filter
As there's potential for failure of the nla_memdup(),
check the return value.
Fixes:
a442b761b24b ("cfg80211: add add_nan_func / del_nan_func")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220301100020.3801187-1-jiasheng@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Randy Dunlap [Wed, 23 Feb 2022 03:06:30 +0000 (19:06 -0800)]
iwlwifi: mvm: check debugfs_dir ptr before use
When "debugfs=off" is used on the kernel command line, iwiwifi's
mvm module uses an invalid/unchecked debugfs_dir pointer and causes
a BUG:
BUG: kernel NULL pointer dereference, address:
000000000000004f
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 503 Comm: modprobe Tainted: G W 5.17.0-rc5 #7
Hardware name: Dell Inc. Inspiron 15 5510/076F7Y, BIOS 2.4.1 11/05/2021
RIP: 0010:iwl_mvm_dbgfs_register+0x692/0x700 [iwlmvm]
Code: 69 a0 be 80 01 00 00 48 c7 c7 50 73 6a a0 e8 95 cf ee e0 48 8b 83 b0 1e 00 00 48 c7 c2 54 73 6a a0 be 64 00 00 00 48 8d 7d 8c <48> 8b 48 50 e8 15 22 07 e1 48 8b 43 28 48 8d 55 8c 48 c7 c7 5f 73
RSP: 0018:
ffffc90000a0ba68 EFLAGS:
00010246
RAX:
ffffffffffffffff RBX:
ffff88817d6e3328 RCX:
ffff88817d6e3328
RDX:
ffffffffa06a7354 RSI:
0000000000000064 RDI:
ffffc90000a0ba6c
RBP:
ffffc90000a0bae0 R08:
ffffffff824e4880 R09:
ffffffffa069d620
R10:
ffffc90000a0ba00 R11:
ffffffffffffffff R12:
0000000000000000
R13:
ffffc90000a0bb28 R14:
ffff88817d6e3328 R15:
ffff88817d6e3320
FS:
00007f64dd92d740(0000) GS:
ffff88847f640000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
000000000000004f CR3:
000000016fc79001 CR4:
0000000000770ee0
PKRU:
55555554
Call Trace:
<TASK>
? iwl_mvm_mac_setup_register+0xbdc/0xda0 [iwlmvm]
iwl_mvm_start_post_nvm+0x71/0x100 [iwlmvm]
iwl_op_mode_mvm_start+0xab8/0xb30 [iwlmvm]
_iwl_op_mode_start+0x6f/0xd0 [iwlwifi]
iwl_opmode_register+0x6a/0xe0 [iwlwifi]
? 0xffffffffa0231000
iwl_mvm_init+0x35/0x1000 [iwlmvm]
? 0xffffffffa0231000
do_one_initcall+0x5a/0x1b0
? kmem_cache_alloc+0x1e5/0x2f0
? do_init_module+0x1e/0x220
do_init_module+0x48/0x220
load_module+0x2602/0x2bc0
? __kernel_read+0x145/0x2e0
? kernel_read_file+0x229/0x290
__do_sys_finit_module+0xc5/0x130
? __do_sys_finit_module+0xc5/0x130
__x64_sys_finit_module+0x13/0x20
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f64dda564dd
Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1b 29 0f 00 f7 d8 64 89 01 48
RSP: 002b:
00007ffdba393f88 EFLAGS:
00000246 ORIG_RAX:
0000000000000139
RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f64dda564dd
RDX:
0000000000000000 RSI:
00005575399e2ab2 RDI:
0000000000000001
RBP:
000055753a91c5e0 R08:
0000000000000000 R09:
0000000000000002
R10:
0000000000000001 R11:
0000000000000246 R12:
00005575399e2ab2
R13:
000055753a91ceb0 R14:
0000000000000000 R15:
000055753a923018
</TASK>
Modules linked in: btintel(+) btmtk bluetooth vfat snd_hda_codec_hdmi fat snd_hda_codec_realtek snd_hda_codec_generic iwlmvm(+) snd_sof_pci_intel_tgl mac80211 snd_sof_intel_hda_common soundwire_intel soundwire_generic_allocation soundwire_cadence soundwire_bus snd_sof_intel_hda snd_sof_pci snd_sof snd_sof_xtensa_dsp snd_soc_hdac_hda snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_soc_core btrfs snd_compress snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec raid6_pq iwlwifi snd_hda_core snd_pcm snd_timer snd soundcore cfg80211 intel_ish_ipc(+) thunderbolt rfkill intel_ishtp ucsi_acpi wmi i2c_hid_acpi i2c_hid evdev
CR2:
000000000000004f
---[ end trace
0000000000000000 ]---
Check the debugfs_dir pointer for an error before using it.
Fixes:
8c082a99edb9 ("iwlwifi: mvm: simplify iwl_mvm_dbgfs_register")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220223030630.23241-1-rdunlap@infradead.org
[change to make both conditional]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Golan Ben Ami [Tue, 1 Mar 2022 07:29:26 +0000 (09:29 +0200)]
iwlwifi: don't advertise TWT support
Some APs misbehave when TWT is used and cause our firmware to crash.
We don't know a reasonable way to detect and work around this problem
in the FW yet. To prevent these crashes, disable TWT in the driver by
stopping to advertise TWT support.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215523
Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
[reworded the commit message]
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20220301072926.153969-1-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Ben Dooks [Fri, 18 Feb 2022 09:38:58 +0000 (09:38 +0000)]
rfkill: define rfill_soft_blocked() if !RFKILL
If CONFIG_RFKILL is not set, the Intel WiFi driver will not build
the iw_mvm driver part due to the missing rfill_soft_blocked()
call. Adding a inline declaration of rfill_soft_blocked() if
CONFIG_RFKILL=n fixes the following error:
drivers/net/wireless/intel/iwlwifi/mvm/mvm.h: In function 'iwl_mvm_mei_set_sw_rfkill_state':
drivers/net/wireless/intel/iwlwifi/mvm/mvm.h:2215:38: error: implicit declaration of function 'rfkill_soft_blocked'; did you mean 'rfkill_blocked'? [-Werror=implicit-function-declaration]
2215 | mvm->hw_registered ? rfkill_soft_blocked(mvm->hw->wiphy->rfkill) : false;
| ^~~~~~~~~~~~~~~~~~~
| rfkill_blocked
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reported-by: Neill Whillans <neill.whillans@codethink.co.uk>
Fixes:
5bc9a9dd7535 ("rfkill: allow to get the software rfkill state")
Link: https://lore.kernel.org/r/20220218093858.1245677-1-ben.dooks@codethink.co.uk
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Ilya Lipnitskiy [Tue, 1 Mar 2022 01:15:07 +0000 (17:15 -0800)]
MIPS: ralink: mt7621: use bitwise NOT instead of logical
It was the intention to reverse the bits, not make them all zero by
using logical NOT operator.
Fixes:
cc19db8b312a ("MIPS: ralink: mt7621: do memory detection on KSEG1")
Suggested-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
David S. Miller [Tue, 1 Mar 2022 08:33:55 +0000 (08:33 +0000)]
Merge branch '1GbE' of git://git./linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-02-28
This series contains updates to igc and e1000e drivers.
Corinna Vinschen ensures release of hardware sempahore on failed
register read in igc_read_phy_reg_gpy().
Sasha does the same for the write variant, igc_write_phy_reg_gpy(). On
e1000e, he resolves an issue with hardware unit hang on s0ix exit
by disabling some bits and LAN connected device reset during power
management flows. Lastly, he allows for TGP platforms to correct its
NVM checksum.
v2: Fix Fixes tag on patch 3
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sasha Neftin [Thu, 3 Feb 2022 12:21:49 +0000 (14:21 +0200)]
e1000e: Correct NVM checksum verification flow
Update MAC type check e1000_pch_tgp because for e1000_pch_cnp,
NVM checksum update is still possible.
Emit a more detailed warning message.
Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1191663
Fixes:
4051f68318ca ("e1000e: Do not take care about recovery NVM checksum")
Reported-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Sasha Neftin [Tue, 25 Jan 2022 17:31:23 +0000 (19:31 +0200)]
e1000e: Fix possible HW unit hang after an s0ix exit
Disable the OEM bit/Gig Disable/restart AN impact and disable the PHY
LAN connected device (LCD) reset during power management flows. This
fixes possible HW unit hangs on the s0ix exit on some corporate ADL
platforms.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214821
Fixes:
3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Suggested-by: Nir Efrati <nir.efrati@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Florian Westphal [Mon, 28 Feb 2022 03:18:05 +0000 (04:18 +0100)]
netfilter: egress: silence egress hook lockdep splats
Netfilter assumes its called with rcu_read_lock held, but in egress
hook case it may be called with BH readlock.
This triggers lockdep splat.
In order to avoid to change all rcu_dereference() to
rcu_dereference_check(..., rcu_read_lock_bh_held()), wrap nf_hook_slow
with read lock/unlock pair.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
projects / platform / kernel / linux-rpi.git / log