Peter Ujfalusi [Mon, 10 Jan 2011 13:39:49 +0000 (15:39 +0200)]
ASoC: tlv320dac33: Add DAPM selection for LOM invert
The L/R LOM line can be invertined side of the
corresponding DAC, or inverted from the corresponding
LOP.
Add control for user space to select the source of the
LOM inversion.
When only the analog bypass is enabled, and the LOM
is inverted from DAC output, we need to power the
corresponding DAC.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
David Lambert [Thu, 6 Jan 2011 14:00:37 +0000 (08:00 -0600)]
ASoC: DMIC codec: Adding a generic DMIC codec
This codec is to be used by the DMIC driver to
control the DMIC codec. This driver will be used on future
implementations of the DMIC driver to support codec specific
features.
At this time, the codec driver just registers the codec DAI.
Signed-off-by: David Lambert <dlambert@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Peter Ujfalusi [Wed, 22 Dec 2010 08:45:18 +0000 (10:45 +0200)]
ASoC: tlv320dac33: Add 32/24 bit audio support
Add support for 24 bit audio (with S32_LE msbits 24).
The reason to limit the msbits to 24, is that the FIFO
can be configured for 16 or 24 bit layout.
It is unknown how the codec would downsample from 32 to
24 bit, if the interface is configured to receive 32
bit data.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Peter Ujfalusi [Wed, 22 Dec 2010 08:45:17 +0000 (10:45 +0200)]
ASoC: tlv320dac33: Some cleanup for 32/24 bit support
Change the structure of FIFO handling in order to
pave the way for adding 32/24 bit audio support.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Peter Ujfalusi [Wed, 22 Dec 2010 08:45:16 +0000 (10:45 +0200)]
ASoC: tlv320dac33: Remove manual FIFO configuration
The manual FIFO configuration was the first version to enable
the use of the FIFO in the codec.
It had served it's purpose as debugging aid, but the automatic
FIFO configuration is much safer to use.
The removal of the manual controls, and configuration makes
it easier to add new features for the codec later, since
the manual mode neded different ways to calculate, and
protect against misconfiguration.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Olaya, Margarita [Mon, 20 Dec 2010 16:39:20 +0000 (10:39 -0600)]
ASoC: twl6040: Convert HF and HS drivers to use DAPM OUT_DRV widget
Make the phoenix HS and HF drivers use the new DAPM driver
widget in order to guarantee power ON/OFF order sequence.
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Jorge Eduardo Candelaria [Mon, 20 Dec 2010 17:32:47 +0000 (11:32 -0600)]
ASoC: mcbsp: Add McBSP support for OMAP4
This patch adds McBSP support for the OMAP4 CPU
Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Takashi Iwai [Fri, 17 Dec 2010 15:43:17 +0000 (16:43 +0100)]
Merge branch 'for-2.6.38' of git://git./linux/kernel/git/lrg/asoc-2.6 into topic/asoc
Margarita Olaya Cabrera [Wed, 15 Dec 2010 01:00:21 +0000 (19:00 -0600)]
ASoC: twl6040: Add ramp up/down volume for HS and HF
Add ramp functions for the headset and handsfree outputs
in order to reduce the pops during power on/off sequences.
In order to give more control to volume ramp, step size and delay
between steps can be specified.
The patches are based on wm8350 implementation from Liam
Girdwood.
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Olaya, Margarita [Wed, 15 Dec 2010 01:18:36 +0000 (19:18 -0600)]
ASoC: twl6040: Set default gains to minimun value
Updated default values to improve power consumption.
Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Misael Lopez Cruz [Sat, 11 Dec 2010 03:06:34 +0000 (21:06 -0600)]
ASoC: twl6040: Use correct offset for LineInAmp Right
Gain for LineInAmp Right uses LINEGAIN[5:3], which means that
offset for right channel should be 4.
Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Olaya, Margarita [Sat, 11 Dec 2010 03:06:39 +0000 (21:06 -0600)]
ASoC: twl6040: Fix TLV dB step values for gains
Some gains were incorrectly configured for dB values.
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Jorge Eduardo Candelaria [Sat, 11 Dec 2010 03:06:30 +0000 (21:06 -0600)]
ASoC: twl6040: Increase timeout for power up
After coming back from suspend, the timeout waiting for Phoenix
chip to complete its power up sequence is not enough, which leaves
the codec cache value for some registers in an outdated state.
Increase the timeout value to wait for the power up sequence
to correclty complete.
Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Misael Lopez Cruz [Sat, 11 Dec 2010 03:06:24 +0000 (21:06 -0600)]
ASoC: twl6040: Enable plug detection interrupts
Enable plug detection interrupt mask in order to get headset
PLUGINT/UNPLUGINT interrupts.
Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Jorge Eduardo Candelaria [Sat, 11 Dec 2010 03:06:13 +0000 (21:06 -0600)]
ASoC: twl6040: Clear interrupt status at boot time
On Phoenix 1.1, the INTID register default value is an invalid
one, causing the interrupt handler to think the phoenix power on
sequence is ready before it actually finishes.
This causes some i2c errors when trying to configure twl.
Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Olaya, Margarita [Sat, 11 Dec 2010 03:06:07 +0000 (21:06 -0600)]
ASoC: twl6040: Enable automatic power for phoenix 1.1
Phoenix 1.1 supports automatic power on sequence, a
verification is added to use it with new revision of
the chip.
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Francois Mazard [Sat, 11 Dec 2010 03:06:03 +0000 (21:06 -0600)]
ASoC: twl6040: Fix analog Mic L & R mux controls
The mux control has 4 elements not 3
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Olaya, Margarita [Sat, 11 Dec 2010 03:05:58 +0000 (21:05 -0600)]
ASoC: twl6040: Support other sample rates.
The twl6040 can support more sample rates other than 88.2 and 96k.
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Olaya, Margarita [Sat, 11 Dec 2010 03:05:54 +0000 (21:05 -0600)]
ASoC: twl6040: Fix PCM error handling ops
This patch moves all the PCM error handling for clock config
out of trigger() and startup() and into prepare().
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Olaya, Margarita [Sat, 11 Dec 2010 03:05:46 +0000 (21:05 -0600)]
ASoC: twl6040: Restore bias level at resume
This patch restores the CODEC bias level at resume().
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Jorge Eduardo Candelaria [Sat, 11 Dec 2010 03:05:32 +0000 (21:05 -0600)]
ASoC: twl6040: Add headset and handset mux controls
This patch adds support for the twl6040 headset and handset
MUX controls.
Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Olaya, Margarita [Sat, 11 Dec 2010 03:05:30 +0000 (21:05 -0600)]
ASoC: twl6040: Modify the IRQ handler
Multiples interrupts can be received. The irq handler is modified
to attend all of them.
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Olaya, Margarita [Sat, 11 Dec 2010 03:05:24 +0000 (21:05 -0600)]
ASoC: twl6040: Update twl IO macro
Update the codec to use the new twl core register macros
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Jorge Eduardo Candelaria [Sat, 11 Dec 2010 02:45:19 +0000 (20:45 -0600)]
ASoC: sdp4430: Add Jack support
Use jack framework to enable detection for the headset microphone
and stereo output in the sdp4430.
Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
Signed-off-by: David Anders <x0132446@ti.com>
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Jorge Eduardo Candelaria [Sat, 11 Dec 2010 02:45:17 +0000 (20:45 -0600)]
ASoC: twl6040: Add jack support for headset and handset
This patch adds support for reporting twl6040 headset and
handset jack events.
The machine driver retrieves and report the status through
twl6040_hs_jack_detect.
A workq is used to debounce of the irq.
Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Peter Ujfalusi [Tue, 14 Dec 2010 11:45:29 +0000 (13:45 +0200)]
ASoC: TWL4030: Fix 24bit support
twl4030 series of codecs supports S32_LE with msbits=24.
Replace the S24_LE with S32_LE format, and add constraint
for 24msbit in case of 32 S32_LE format.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Dimitris Papastamos [Tue, 14 Dec 2010 15:15:36 +0000 (15:15 +0000)]
ASoC: soc-cache: A few minor stylistic changes
Remove redundant parentheses/spaces in the use of the sizeof
operator.
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Tue, 14 Dec 2010 11:25:18 +0000 (11:25 +0000)]
ASoC: Explicitly clear WM8993 ramp controls on power down
This helps ensure that the ramp logic is reset when powering back up.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Olaya, Margarita [Sat, 11 Dec 2010 03:11:44 +0000 (21:11 -0600)]
ASoC: dapm: Add output driver widget
In some cases it was not possible to follow the appropiate power
ON/OFF sequence like in cases where the PGA needs to be enabled
before the driver and disabled before the PGA for pop reduction.
Add a widget to support output driver (speaker, haptic, vibra, etc)
drivers where power ON/OFF ordering is important.
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Mon, 13 Dec 2010 15:07:40 +0000 (15:07 +0000)]
regulator: Update LDO2 for WM8958
LDO2 has a slightly different range of supported voltages on WM8958
so update the selector<->voltage mappings to match.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Mark Brown [Mon, 13 Dec 2010 17:03:27 +0000 (17:03 +0000)]
ASoC: Fix AC'97 registration unwind
soc_unregister_ac97_dai_link() takes a CODEC as an argument, not a
rtd like the registration function, so give it what it's looking for.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Jarkko Nikula [Fri, 10 Dec 2010 18:54:49 +0000 (20:54 +0200)]
ASoC: Fix build error caused by merging a fix for 2.6.37 into 2.6.38
Fix "ASoC: Fix bias power down of non-DAPM codec" for 3.6.37 will cause a
build error when merging into ASoC for-2.6.38. Fix the issue by doing a
change that commit ce6120c "ASoC: Decouple DAPM from CODECs" would do.
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Mon, 13 Dec 2010 16:48:38 +0000 (16:48 +0000)]
Merge branch 'for-2.6.37' into for-2.6.38
Jarkko Nikula [Fri, 10 Dec 2010 18:53:55 +0000 (20:53 +0200)]
ASoC: Fix bias power down of non-DAPM codec
Currently bias of non-DAPM codec will be powered down (standby/off) whenever
there is a stream stop. This is wrong in simultaneous playback/capture since
the bias is put down immediately after stopping the first stream.
Fix this by using the codec->active count when figuring out the needed bias
level after stream stop.
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Mon, 13 Dec 2010 15:53:31 +0000 (15:53 +0000)]
Merge branch 'topic/asoc' of git://git./linux/kernel/git/tiwai/sound-2.6 into for-2.6.38
Takashi Iwai [Mon, 13 Dec 2010 11:55:39 +0000 (12:55 +0100)]
ASoC: Fix merge errors with flush_scheduled_work() removal
delayed_work was moved to dapm in the commit
ce6120cca2589ede530200c7cfe11ac9f144333c
ASoC: Decouple DAPM from CODECs
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mark Brown [Wed, 8 Dec 2010 13:49:43 +0000 (13:49 +0000)]
ASoC: Fix widgets for WM8994/58 AIF2 source control
The compiler really ought to have been warning about unreferenced
variables...
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Takashi Iwai [Mon, 13 Dec 2010 08:28:43 +0000 (09:28 +0100)]
Merge branch 'topic/workq-update' into topic/asoc
Conflicts:
sound/soc/codecs/wm8350.c
sound/soc/codecs/wm8753.c
sound/soc/sh/fsi.c
sound/soc/soc-core.c
Tejun Heo [Sat, 11 Dec 2010 16:51:26 +0000 (17:51 +0100)]
sound: don't use flush_scheduled_work()
flush_scheduled_work() is deprecated and scheduled to be removed.
* cancel[_delayed]_work() + flush_scheduled_work() ->
cancel[_delayed]_work_sync().
* wm8350, wm8753 and soc-core use custom code to cancel a delayed
work, execute it immediately if it was pending and wait for its
completion. This is equivalent to flush_delayed_work_sync(). Use
it instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mark Brown [Fri, 10 Dec 2010 19:17:08 +0000 (19:17 +0000)]
ASoC: Automatically manage WM8903 deemphasis rate
Provide the user with a boolean control then automatically select
the deemphasis filter most closely matching the sample rate.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Mark Brown [Fri, 10 Dec 2010 19:17:07 +0000 (19:17 +0000)]
ASoC: Remove open coded symmetry implementation from WM8903
We're already flagged as using symmetric rates so we don't need to
have a custom implementation.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Mark Brown [Fri, 10 Dec 2010 19:17:06 +0000 (19:17 +0000)]
ASoC: Implement WM8903 oversampling rate controls
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Mark Brown [Fri, 10 Dec 2010 18:42:58 +0000 (18:42 +0000)]
ASoC: Implement WM8903 high pass filter support
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Peter Ujfalusi [Fri, 10 Dec 2010 11:26:31 +0000 (13:26 +0200)]
ASoC: tlv320dac33: Power down digital parts, when not needed
If the following scenario has been followed:
1. Enable analog bypass
amixer sset 'Analog Left Bypass' on
amixer sset 'Analog Right Bypass' on
2. Start playback
aplay -fdat -d3 /dev/zero
After the playback stopped (3 sec), and the soc timeout (5 sec),
the digital parts of the codec will remain powered up.
This means that the DAI clocks are continue to run, the
oscillator remain operational, etc.
Use the SND_SOC_DAPM_POST_PMD widget to get notification
about the stopped stream, and power down the digital
part of the codec.
If the analog bypass is enabled, than the codec will remain in
BIAS_ON level, and things will work correctly.
In case, if the bypass is disabled, than the codec will
fall to BIAS_STANDBY than to BIAS_OFF level, as it used
to.
The digital part of DAC33 is initialized at every stream start
(DAPM_PRE:PRE_PMU event), so subsequent streams (within 5 sec)
will have working DAI.
When the codec is coming out from BIAS_OFF, the full power-up
sequence followed by the same DAPM_PRE widget event will power up
the digital part.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Vasily Khoruzhick [Thu, 9 Dec 2010 19:17:56 +0000 (21:17 +0200)]
ASoC: Add HP iPAQ H1940 support
Add glue driver to make s3c24xx-i2s and uda1380 produce some sound on
H1940.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Thu, 9 Dec 2010 12:07:44 +0000 (12:07 +0000)]
ASoC: Implement WM8994/58 DAC and ADC oversampling control
The oversampling rate of the DAC and ADC can be controlled to optimise
for either low power consumption or maximum performance.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Mario Becroft [Fri, 3 Dec 2010 22:51:34 +0000 (11:51 +1300)]
ASoC: Optimise WM9081 FLL performance
Tune the FLL gain for optimal performance according to evaluation
results.
Signed-off-by: Mario Becroft <mb@gem.win.co.nz>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Thu, 9 Dec 2010 11:29:13 +0000 (11:29 +0000)]
Merge branch 'for-2.6.37' into for-2.6.38
Seungwhan Youn [Thu, 9 Dec 2010 04:17:39 +0000 (13:17 +0900)]
ASoC: Remove unnecessary structure definitions
This patch removes some legacy structure definitions which are not using
in current ASoC drivers.
Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Alexander Sverdlin [Thu, 9 Dec 2010 00:43:49 +0000 (03:43 +0300)]
ASoC: EP93xx: sampling rate range extended
Changes to both I2S and PCM code:
- Rates list extended up to 96kHz, it's tested on EDB9302 and works for both capture and
playback.
Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Seungwhan Youn [Thu, 9 Dec 2010 09:07:52 +0000 (18:07 +0900)]
ASoC: WM8580: Fix R8 initial value
Acc to WM8580 manual, the default value for R8 is 0x10, not 0x1c.
Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
Dmitry Artamonow [Wed, 8 Dec 2010 20:36:17 +0000 (23:36 +0300)]
ASoC: fix deemphasis control in wm8904/55/60 codecs
Deemphasis control's .get callback should update control's value instead
of returning it - return value of callback function is used for indicating
error or success of operation.
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
Jorge Eduardo Candelaria [Wed, 8 Dec 2010 16:55:05 +0000 (10:55 -0600)]
ASoC: sdp4430: Enable FM stereo pins
Add FM stereo pins to the machine driver and add them as a
dapm widget.
Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Peter Ujfalusi [Wed, 8 Dec 2010 13:12:56 +0000 (15:12 +0200)]
ASoC: tlv320dac33: Fix compillation error
Fix the compilation error introduced by patch:
ASoC: tlv320dac33: Avoid multiple soft power up
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Peter Ujfalusi [Wed, 8 Dec 2010 14:04:33 +0000 (16:04 +0200)]
ASoC: tlv320dac33: Move DAC LR power on to a supply widget
The power for the DACs need to be enabled, even when only
the analog bypass is in use with the codec, otherwise
the audio is going to be distorted.
Make sure that the DACs are powered all the time, when
there is audio activity.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Peter Ujfalusi [Wed, 8 Dec 2010 14:04:32 +0000 (16:04 +0200)]
ASoC: tlv320dac33: Rename outpup amplifier widget
Use better name for the widget, and remove the 'Power'
from it's name.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Uk Kim [Tue, 7 Dec 2010 13:58:40 +0000 (13:58 +0000)]
ASoC: Add ADC high pass filter support to WM8994
Signed-off-by: Uk Kim <w0806.kim@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Tue, 7 Dec 2010 17:14:56 +0000 (17:14 +0000)]
ASoC: Support WM8994 mono AIF configurations
The WM8994 supports mono signals - enable this in the driver. With DSP
mode an automatic data channel selector is available, activate this
when in mono mode.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Dimitris Papastamos [Tue, 7 Dec 2010 16:30:38 +0000 (16:30 +0000)]
ASoC: soc-core: Fix null pointer dereference
In case the codec driver did not provide a read/write function,
codec->driver->read|write will be NULL. Ensure that we use the one
specified in codec->read|write to avoid oopsing when we access
the debugfs entries. This is achieved by using snd_soc_read() and
snd_soc_write().
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Wed, 8 Dec 2010 13:54:33 +0000 (13:54 +0000)]
Merge branch 'for-2.6.37' into for-2.6.38
Conflicts:
sound/soc/soc-core.c
Axel's fix on two different branches.
Mark Brown [Tue, 7 Dec 2010 15:32:38 +0000 (15:32 +0000)]
ASoC: Correct WM8962 interrupt mask register read
Fix mismerge from the out of tree BSP where this support was developed.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Jassi Brar [Tue, 7 Dec 2010 10:23:07 +0000 (19:23 +0900)]
ASoC: WM8580: Debug BCLK and sample size
In case of SNDRV_PCM_FORMAT_S32_LE, we need to set WM8580_AIF_LENGTH_32,
rather than WM8580_AIF_LENGTH_24.
Also, the BCLK has to be 64fs, for sample size of 20, 24 and 32 bits.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Tue, 7 Dec 2010 08:12:29 +0000 (16:12 +0800)]
ASoC: Fix snd_soc_instantiate_card error path
Properly free the resources in the case of snd_card_register failure
and soc_register_ac97_dai_link failure.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Tue, 7 Dec 2010 12:56:30 +0000 (20:56 +0800)]
ASoC: Fix resource leak if soc_register_ac97_dai_link failed
Properly free the resources in the case of soc_register_ac97_dai_link failure.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Linus Torvalds [Tue, 7 Dec 2010 04:09:04 +0000 (20:09 -0800)]
Linux 2.6.37-rc5
Linus Torvalds [Tue, 7 Dec 2010 04:08:25 +0000 (20:08 -0800)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jlbec/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2_connection_find() returns pointer to bad structure
ocfs2: char is not always signed
Ocfs2: Stop tracking a negative dentry after dentry_iput().
ocfs2: fix memory leak
fs/ocfs2/dlm: Use GFP_ATOMIC under spin_lock
Olof Johansson [Tue, 7 Dec 2010 01:36:32 +0000 (19:36 -0600)]
ARM: tegra: fix regression from addruart rewrite
Commit
0ea129300982 ("arm: return both physical and virtual addresses
from addruart") took out the test for MMU on/off but didn't switch the
ldr instructions to no longer be conditionals based on said test.
Fix that.
Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Colin Cross <ccross@android.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 6 Dec 2010 23:51:14 +0000 (15:51 -0800)]
Merge branch 'pm-fixes' of git://git./linux/kernel/git/rafael/suspend-2.6
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
PM / Hibernate: Fix memory corruption related to swap
PM / Hibernate: Use async I/O when reading compressed hibernation image
Rafael J. Wysocki [Fri, 3 Dec 2010 21:57:45 +0000 (22:57 +0100)]
PM / Hibernate: Fix memory corruption related to swap
There is a problem that swap pages allocated before the creation of
a hibernation image can be released and used for storing the contents
of different memory pages while the image is being saved. Since the
kernel stored in the image doesn't know of that, it causes memory
corruption to occur after resume from hibernation, especially on
systems with relatively small RAM that need to swap often.
This issue can be addressed by keeping the GFP_IOFS bits clear
in gfp_allowed_mask during the entire hibernation, including the
saving of the image, until the system is finally turned off or
the hibernation is aborted. Unfortunately, for this purpose
it's necessary to rework the way in which the hibernate and
suspend code manipulates gfp_allowed_mask.
This change is based on an earlier patch from Hugh Dickins.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: stable@kernel.org
Linus Torvalds [Mon, 6 Dec 2010 22:49:51 +0000 (14:49 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
ARM: 6524/1: GIC irq desciptor bug fix
ARM: 6523/1: iop: ensure sched_clock() is notrace
ARM: 6456/1: Fix for building DEBUG with sa11xx_base.c as a module.
ARM: 6519/1: kuser: Fix incorrect cmpxchg syscall in kuser helpers
ARM: 6505/1: kprobes: Don't HAVE_KPROBES when CONFIG_THUMB2_KERNEL is selected
ARM: 6508/1: vexpress: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL
ARM: 6507/1: RealView: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL
ARM: 6504/1: Thumb-2: Fix long-distance conditional branches in head.S for Thumb-2.
ARM: 6503/1: Thumb-2: Restore sensible zImage header layout for CONFIG_THUMB2_KERNEL
ARM: 6502/1: Thumb-2: Fix CONFIG_THUMB2_KERNEL breakage in compressed/head.S
ARM: 6501/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in mm/proc-v7.S
ARM: 6500/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in kernel/head.S
ARM: 6499/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in bootp/init.S
ARM: 6498/1: vfp: Correct data alignment for CONFIG_THUMB2_KERNEL
ARM: 6497/1: kexec: Correct data alignment for CONFIG_THUMB2_KERNEL
ARM: 6496/1: GIC: Do not try to register more then NR_IRQS interrupts
ARM: cns3xxx: Fix build with CONFIG_PCI=y
Bojan Smojver [Thu, 25 Nov 2010 22:41:39 +0000 (23:41 +0100)]
PM / Hibernate: Use async I/O when reading compressed hibernation image
This is a fix for reading LZO compressed image using async I/O.
Essentially, instead of having just one page into which we keep
reading blocks from swap, we allocate enough of them to cover the
largest compressed size and then let block I/O pick them all up. Once
we have them all (and here we wait), we decompress them, as usual.
Obviously, the very first block we still pick up synchronously,
because we need to know the size of the lot before we pick up the
rest.
Also fixed the copyright line, which I've forgotten before.
Signed-off-by: Bojan Smojver <bojan@rexursive.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Dimitris Papastamos [Mon, 6 Dec 2010 15:49:20 +0000 (15:49 +0000)]
ASoC: soc-core: Remove useless inline function construct
There is no need to mark this function as inline. Inline functions
usually are small and concise functions that benefit from not needing
to set up a stack frame and undergo a call/ret sequence upon each
invocation.
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Dimitris Papastamos [Mon, 6 Dec 2010 15:42:17 +0000 (15:42 +0000)]
ASoC: soc-core: Replace use of strncpy() with strlcpy()
By using strncpy() if the source string does not have a null byte in the
first n bytes, then the destination string is not null-terminated.
This can be fixed in a two-step process by manually null-terminating the
array after the use of strncpy() or by using strlcpy().
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Jarkko Nikula [Mon, 6 Dec 2010 14:27:07 +0000 (16:27 +0200)]
ASoC: Merge common code in DAI link and auxiliary codec probing/removal
Commit 2eea392 "ASoC: Add support for optional auxiliary dailess codecs"
added much of code that can be shared with DAI link codec probing/removal.
Merge now this common code into new soc_probe_codec, soc_remove_codec and
soc_post_component_init functions.
Error prints in these functions are converted to use dev_err and to print
the error code.
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Russell King [Mon, 6 Dec 2010 15:39:23 +0000 (15:39 +0000)]
Merge branch 'for-rmk-fixes' of git://git.infradead.org/users/cbou/linux-cns3xxx
Mark Brown [Mon, 6 Dec 2010 14:14:47 +0000 (14:14 +0000)]
Merge branch 'for-2.6.37' into for-2.6.38
Conflicts:
include/linux/mfd/wm8994/pdata.h
Dimitris Papastamos [Mon, 6 Dec 2010 09:51:57 +0000 (09:51 +0000)]
ASoC: soc-cache: Add optional cache name member to snd_soc_cache_ops
Added an optional name member to snd_soc_cache_ops to enable more
sensible diagnostic messages during cache init, exit and sync.
Remove redundant newline in source code.
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Seungwhan Youn [Sun, 5 Dec 2010 22:57:13 +0000 (07:57 +0900)]
ASoC: SAMSUNG: Remove duplicated snd_card on smdk_spdif
This patch remove duplicated snd_card defination on smdk_spdif.
Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Seungwhan Youn [Sun, 5 Dec 2010 22:56:59 +0000 (07:56 +0900)]
ASoC: SAMSUNG: Fix initial return value
This patch fixed intial return value to be a '0' as asuccess on
set_audio_clock_heirachy(). This avoids unintended error on initialize.
Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Sun, 5 Dec 2010 12:22:46 +0000 (12:22 +0000)]
ASoC: Add trace events for jack detection
As jack detection can trigger DAPM and the latency in debouncing can create
confusing windows in operation provide some trace events which will hopefully
help in diagnostics. The soc-jack core traces all reports that it gets and
the resulting notifications to upper layers. An event for jack IRQs is also
provided for instrumentation of debounce, and used in the GPIO jack code.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Axel Lin [Mon, 6 Dec 2010 08:48:03 +0000 (16:48 +0800)]
ASoC: Hold client_mutex while calling snd_soc_instantiate_cards()
As the comments of snd_soc_instantiate_cards() said,
snd_soc_instantiate_cards() must be called with client_mutex.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Uk Kim [Sun, 5 Dec 2010 08:26:07 +0000 (17:26 +0900)]
ASoC: Fix swap of left and right channels for WM8993/4 speaker boost gain
SPKOUTL_BOOST start from third bit, SPKOUTLR_BOOST start from 0 bit.
Signed-off-by: Uk Kim <w0806.kim@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
Uk Kim [Sun, 5 Dec 2010 08:32:16 +0000 (17:32 +0900)]
ASoC: Fix off by one error in WM8994 EQ register bank size
Signed-off-by: Uk Kim <w0806.kim@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
Mark Brown [Sat, 4 Dec 2010 12:41:04 +0000 (12:41 +0000)]
ASoC: Add post-CODEC bias level callback for machine driver
Currently the machine driver can only do bias level configuration before
the CODEC bias level is brought up. This means that the machine cannot do
any configuration which depends on the CODEC bias level being maintained.
Provide a post-CODEC callback which allows the machine driver to do things
like enable the FLL on a CODEC which is brought down to BIAS_OFF when idle.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Chao Xie [Mon, 6 Dec 2010 06:01:10 +0000 (07:01 +0100)]
ARM: 6524/1: GIC irq desciptor bug fix
gic_set_cpu will directly use irq_desc[]. If CONFIG_SPARSE_IRQ is
enabled, there is no irq_desc[]. So we need use irq_to_desc(irq) to
get the descriptor for irq.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Linus Torvalds [Mon, 6 Dec 2010 00:45:02 +0000 (16:45 -0800)]
Merge branch 'slab/urgent' of git://git./linux/kernel/git/penberg/slab-2.6
* 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
slub: Fix a crash during slabinfo -v
Linus Torvalds [Mon, 6 Dec 2010 00:41:13 +0000 (16:41 -0800)]
Merge branch 'rc-fixes' of git://git./linux/kernel/git/mmarek/kbuild-2.6
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
initramfs: Really fix build break on symbol-prefixed archs
[media] Fix Kconfig errors due to two visible menus
i2c/algos: convert Kconfig to use the menu's `visible' keyword
media/video: convert Kconfig to use the menu's `visible' keyword
Revert "i2c: Fix Kconfig dependencies"
kconfig: regen parser
kconfig: add an option to determine a menu's visibility
Linus Torvalds [Mon, 6 Dec 2010 00:40:31 +0000 (16:40 -0800)]
Merge branch 'fixes' of git://git./linux/kernel/git/kyle/parisc-2.6
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
parisc: Fix GSC PS/2 driver name for keyboard and mouse
parisc: KittyHawk LCD fix
parisc: convert the rest of the irq handlers to simple/percpu
parisc: fix dino/gsc interrupts
parisc: remove redundant initialization in sigsegv path of sys_rt_sigreturn
Eric W. Biederman [Sun, 5 Dec 2010 23:51:21 +0000 (15:51 -0800)]
Revert "vfs: show unreachable paths in getcwd and proc"
Because it caused a chroot ttyname regression in 2.6.36.
As of 2.6.36 ttyname does not work in a chroot. It has already been
reported that screen breaks, and for me this breaks an automated
distribution testsuite, that I need to preserve the ability to run the
existing binaries on for several more years. glibc 2.11.3 which has a
fix for this is not an option.
The root cause of this breakage is:
commit
8df9d1a4142311c084ffeeacb67cd34d190eff74
Author: Miklos Szeredi <mszeredi@suse.cz>
Date: Tue Aug 10 11:41:41 2010 +0200
vfs: show unreachable paths in getcwd and proc
Prepend "(unreachable)" to path strings if the path is not reachable
from the current root.
Two places updated are
- the return string from getcwd()
- and symlinks under /proc/$PID.
Other uses of d_path() are left unchanged (we know that some old
software crashes if /proc/mounts is changed).
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
So remove the nice sounding, but ultimately ill advised change to how
/proc/fd symlinks work.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guy Martin [Tue, 2 Nov 2010 15:23:08 +0000 (15:23 +0000)]
parisc: Fix GSC PS/2 driver name for keyboard and mouse
Fix kernel warnings caused by the driver name of GSC PS/2 containing '/'.
The following warnings are observed on a K410 system :
[ 10.700000] name 'GSC PS/2 keyboard'
[ 10.732000] ------------[ cut here ]------------
[ 10.772000] WARNING: at fs/proc/generic.c:323
[ 10.828000] Modules linked in:
[ 10.916000]
[ 10.916000] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
[ 10.936000] PSW:
00000000000001000000000000001111 Not tainted
[ 10.992000] r00-03
0004000f 104fe3e0 10201ea0 00000000
[ 11.060000] r04-07
4fc405c8 00000006 4fc405c8 4fc40694
[ 11.124000] r08-11
4fc40708 10438aa0 00000001 1043bfc8
[ 11.184000] r12-15
104ff2a0 104ff2a0 4fc38634 104ff2a0
[ 11.248000] r16-19
f0001570 10479af0 f000006c 1044fe50
[ 11.308000] r20-23
00000000 00000028 104cd858 00000000
[ 11.372000] r24-27
ffffffff 0000000e 1044fe10 1043bbe0
[ 11.436000] r28-31
0000002b 00000078 4fc40800 0000000d
[ 11.496000] sr00-03
00000000 00000000 00000000 00000000
[ 11.560000] sr04-07
00000000 00000000 00000000 00000000
[ 11.624000]
[ 11.688000] IASQ:
00000000 00000000 IAOQ:
10201ea0 10201ea4
[ 11.704000] IIR:
03ffe01f ISR:
00000000 IOR:
0000000d
[ 11.772000] CPU: 0 CR30:
4fc40000 CR31:
f01043b0
[ 11.836000] ORIG_R28:
4fc40940
[ 11.904000] IAOQ[0]: __xlate_proc_name+0x90/0xd0
[ 11.940000] IAOQ[1]: __xlate_proc_name+0x94/0xd0
[ 11.996000] RP(r2): __xlate_proc_name+0x90/0xd0
[ 12.052000] Backtrace:
[ 12.108000] [<
10257790>] vsnprintf+0x290/0x4f4
[ 12.136000]
[ 12.188000] ---[ end trace
91bf6ece17e322dd ]---
[ 12.208000] serio: GSC PS/2 keyboard port at 0x0001c000 irq 19 @ 10:12:7
[ 12.264000] name 'GSC PS/2 mouse'
[ 12.344000] ------------[ cut here ]------------
[ 12.384000] WARNING: at fs/proc/generic.c:323
[ 12.436000] Modules linked in:
[ 12.524000]
[ 12.528000] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
[ 12.544000] PSW:
00000000000001000000000000001111 Tainted: G W
[ 12.600000] r00-03
0004000f 104fe3e0 10201ea0 00000000
[ 12.680000] r04-07
4fc405c8 00000006 4fc405c8 4fc40694
[ 12.740000] r08-11
4fc40708 10438aa0 00000001 1043bfc8
[ 12.804000] r12-15
104ff2a0 104ff2a0 4fc38634 104ff2a0
[ 12.868000] r16-19
f0001570 10479af0 f000006c 1044fe50
[ 12.928000] r20-23
00000000 00000025 104cd858 00000000
[ 12.992000] r24-27
ffffffff 0000000e 1044fe10 1043bbe0
[ 13.056000] r28-31
00000028 00000078 4fc40800 0000000d
[ 13.116000] sr00-03
00000000 00000000 00000000 00000000
[ 13.180000] sr04-07
00000000 00000000 00000000 00000000
[ 13.244000]
[ 13.308000] IASQ:
00000000 00000000 IAOQ:
10201ea0 10201ea4
[ 13.324000] IIR:
03ffe01f ISR:
00000000 IOR:
0000000d
[ 13.392000] CPU: 0 CR30:
4fc40000 CR31:
f01043b0
[ 13.456000] ORIG_R28:
4fc40940
[ 13.524000] IAOQ[0]: __xlate_proc_name+0x90/0xd0
[ 13.560000] IAOQ[1]: __xlate_proc_name+0x94/0xd0
[ 13.616000] RP(r2): __xlate_proc_name+0x90/0xd0
[ 13.672000] Backtrace:
[ 13.728000] [<
10257790>] vsnprintf+0x290/0x4f4
[ 13.756000]
[ 13.808000] ---[ end trace
91bf6ece17e322de ]---
[ 13.828000] serio: GSC PS/2 mouse port at 0x00020100 irq 19 @ 10:12:8
Signed-off-by: Guy Martin <gmsoft@tuxicoman.be>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
Guy Martin [Sat, 6 Nov 2010 16:24:29 +0000 (16:24 +0000)]
parisc: KittyHawk LCD fix
K class aka KittyHawk don't have LED support on their LCD. Installing
HP-UX confirmed this. The current led_wq fills the LCD with black
characters each time it runs.
The patch prevents the led_wq workqueue and its proc entry to be
created for KittyHawk machines.
It also increase min_cmd_delay as currently, one character out of two
is lost when a string is sent to the LCD.
Signed-off-by: Guy Martin <gmsoft@tuxicoman.be>
Signed-off-by: Kyle McMartin <kyle@mcmartin.c>
James Bottomley [Fri, 3 Dec 2010 02:01:05 +0000 (02:01 +0000)]
parisc: convert the rest of the irq handlers to simple/percpu
The generic conversion eliminates the spurious no_ack and no_end
routines, converts all the cascaded handlers to handle_simple_irq() and
makes iosapic use a modified handle_percpu_irq() to become the same as
the CPU irq's. This isn't an essential change, but it eliminates the
mask/unmask overhead of handle_level_irq().
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
James Bottomley [Thu, 2 Dec 2010 23:36:47 +0000 (23:36 +0000)]
parisc: fix dino/gsc interrupts
The essential problem we're currently having is that dino (and gsc) is a
cascaded CPU interrupt. Under the old __do_IRQ() handler, our CPU
interrupts basically did an ack followed by an end. In the new scheme,
we replaced them with level handlers which do a mask, an ack and then an
unmask (but no end). Instead, with the renaming of end to eoi, we
actually want to call the percpu flow handlers, because they actually
have all the characteristics we want.
This patch does the conversion and gets my C360 booting again.
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
Rabin Vincent [Sat, 4 Dec 2010 05:20:52 +0000 (06:20 +0100)]
ARM: 6523/1: iop: ensure sched_clock() is notrace
Include sched.h to ensure sched_clock() has the notrace
annotation, and mark any functions it calls as notrace
too.
Include sched.h to ensure sched_clock() has the notrace
annotation, and mark any functions it calls as notrace
too.
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Marcelo Roberto Jimenez [Mon, 18 Oct 2010 21:38:08 +0000 (22:38 +0100)]
ARM: 6456/1: Fix for building DEBUG with sa11xx_base.c as a module.
This patch fixes a compilation issue when compiling PCMCIA SA1100
support as a module with PCMCIA_DEBUG enabled. The symbol
soc_pcmcia_debug was not beeing exported.
ARM: pcmcia: Fix for building DEBUG with sa11xx_base.c as a module.
This patch fixes a compilation issue when compiling PCMCIA SA1100
support as a module with PCMCIA_DEBUG enabled. The symbol
soc_pcmcia_debug was not beeing exported.
Cc: <stable@kernel.org>
Signed-off-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Dave Martin [Wed, 1 Dec 2010 17:12:43 +0000 (18:12 +0100)]
ARM: 6519/1: kuser: Fix incorrect cmpxchg syscall in kuser helpers
The existing code invokes the syscall with rubbish in r7,
due to what looks like an incorrect literal load idiom.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tero Roponen [Wed, 1 Dec 2010 18:04:20 +0000 (20:04 +0200)]
slub: Fix a crash during slabinfo -v
Commit
f7cb1933621bce66a77f690776a16fe3ebbc4d58 ("SLUB: Pass active
and inactive redzone flags instead of boolean to debug functions")
missed two instances of check_object(). This caused a lot of warnings
during 'slabinfo -v' finally leading to a crash:
BUG ext4_xattr: Freepointer corrupt
...
BUG buffer_head: Freepointer corrupt
...
BUG ext4_alloc_context: Freepointer corrupt
...
...
BUG: unable to handle kernel NULL pointer dereference at
0000000000000008
IP: [<
ffffffff810a291f>] file_sb_list_del+0x1c/0x35
PGD
79d78067 PUD
79e67067 PMD 0
Oops: 0002 [#1] SMP
last sysfs file: /sys/kernel/slab/:t-0000192/validate
This patch fixes the problem by converting the two missed instances.
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tero Roponen <tero.roponen@gmail.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Linus Torvalds [Fri, 3 Dec 2010 19:30:57 +0000 (11:30 -0800)]
Merge branch '2.6.37-rc4-pvhvm-fixes' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm
* '2.6.37-rc4-pvhvm-fixes' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm:
xen: unplug the emulated devices at resume time
xen: fix save/restore for PV on HVM guests with pirq remapping
xen: resume the pv console for hvm guests too
xen: fix MSI setup and teardown for PV on HVM guests
xen: use PHYSDEVOP_get_free_pirq to implement find_unbound_pirq
Linus Torvalds [Fri, 3 Dec 2010 18:08:52 +0000 (10:08 -0800)]
Merge branches 'upstream/core' and 'upstream/bugfix' of git://git./linux/kernel/git/jeremy/xen
* 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
xen: allocate irq descs on any NUMA node
xen: prevent crashes with non-HIGHMEM 32-bit kernels with largeish memory
xen: use default_idle
xen: clean up "extra" memory handling some more
* 'upstream/bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
xen: x86/32: perform initial startup on initial_page_table
xen: don't bother to stop other cpus on shutdown/reboot
Mark Brown [Fri, 3 Dec 2010 17:28:29 +0000 (17:28 +0000)]
Merge branch 'for-2.6.37' into for-2.6.38