Sejun Park [Thu, 3 Dec 2015 05:24:47 +0000 (14:24 +0900)]
Upgrade gst-omx to 1.2 with modification
Change-Id: I75c8e888965005b50771a951d57eda51e612c6c2
Sejun Park [Wed, 2 Dec 2015 23:55:28 +0000 (08:55 +0900)]
Merge branch 'upstream/master' into tizen
Change-Id: I6eb03c12b9672f6ad09ad1535351dbc6c0380dc3
Jeon Hee Chul [Wed, 2 Dec 2015 10:19:24 +0000 (19:19 +0900)]
Release 1.2.0
Change-Id: I65b90a7d4caa26f56fe65a95fb086f8ac5d9e016
Enrique Ocaña González [Wed, 18 Nov 2015 13:00:28 +0000 (13:00 +0000)]
Remember the last_error after a failed set state call to avoid blocking the next get state call
gst_omx_video_dec_flush() blocks forever in
http://cgit.freedesktop.org/gstreamer/gst-omx/tree/omx/gstomxvideodec.c?id=
9adf0ff82903cad5331e40975ae91ed5d11bc102#n2110
when the previous call to gst_omx_component_set_state() fails in
http://cgit.freedesktop.org/gstreamer/gst-omx/tree/omx/gstomx.c?id=
9adf0ff82903cad5331e40975ae91ed5d11bc102#n827.
To mitigate that, I set "last_error" to true, so the code in
http://cgit.freedesktop.org/gstreamer/gst-omx/tree/omx/gstomx.c?id=
9adf0ff82903cad5331e40975ae91ed5d11bc102#n862
exits early and doesn't block.
https://bugzilla.gnome.org/show_bug.cgi?id=758274
Enrique Ocaña González [Wed, 18 Nov 2015 12:59:59 +0000 (12:59 +0000)]
Properly handle drain requests while flushing
Without this commit the decoder streaming thread stops without ever attending
the drain request, leaving the decoder input thread waiting forever.
https://bugzilla.gnome.org/show_bug.cgi?id=758274
Nicolas Huet [Tue, 10 Nov 2015 09:42:35 +0000 (10:42 +0100)]
omx: fix hacks leak on class init
Tim-Philipp Müller [Wed, 21 Oct 2015 13:37:13 +0000 (14:37 +0100)]
Automatic update of common submodule
From b99800a to b319909
Sebastian Dröge [Wed, 21 Oct 2015 11:28:41 +0000 (14:28 +0300)]
Automatic update of common submodule
From 9aed1d7 to b99800a
Sejun Park [Tue, 20 Oct 2015 09:54:10 +0000 (18:54 +0900)]
Added gst-omx.conf for building 64-bit
Change-Id: I3b1d389f121405129f78a5fe3808885f155f679a
Signed-off-by: Sejun Park <sejun79.park@samsung.com>
Thiago Santos [Tue, 1 Sep 2015 19:08:11 +0000 (16:08 -0300)]
omxaacdec: Do not accept unknown layouts
It was defaulting to RAW when an unknown layout was received but
the caps template would actually forbid that on the caps query
or accept-caps anyway.
Thiago Santos [Tue, 1 Sep 2015 11:59:54 +0000 (08:59 -0300)]
omxaudiodec: use default pad accept-caps handling
Instead of the audiodecoder one. The OMX audioo decoders have their
valid input in the template pad, so just check against that to
avoid doing a query downstream.
Thiago Santos [Fri, 28 Aug 2015 15:57:33 +0000 (12:57 -0300)]
omxvideodec: use default pad accept-caps handling
Instead of the videodecoder one. The OMX video decoders have their
valid input in the template pad, so just check against that to
avoid doing a query downstream.
Graham Leggett [Sat, 22 Aug 2015 15:54:55 +0000 (15:54 +0000)]
omxvideoenc: Add keyframe support for the Rpi, using OMX_IndexConfigBrcmVideoRequestIFrame
https://bugzilla.gnome.org/show_bug.cgi?id=753085
Sejun Park [Mon, 24 Aug 2015 11:50:21 +0000 (20:50 +0900)]
Changed plugin-name of omx
Change-Id: I6a426f66b6e7902112d04bdf3dfa1b57d37a0243
Vineeth TM [Thu, 20 Aug 2015 08:20:50 +0000 (17:20 +0900)]
gst-omx: Fix memory leaks when context parse fails
When g_option_context_parse fails, context and error variables are not getting free'd
which results in memory leaks. Free'ing the same.
And replacing g_error_free with g_clear_error, which checks if the error being passed
is not NULL and sets the variable to NULL on free'ing.
https://bugzilla.gnome.org/show_bug.cgi?id=753865
Barun Kumar Singh [Mon, 17 Aug 2015 06:16:11 +0000 (11:46 +0530)]
Sending mpeg4 codec data to MFC. Now MFC is able to parse mpeg4 header data.
Signed-off-by: Barun Kumar Singh <barun.singh@samsung.com>
Change-Id: I5a37415505619627cb1f231516cc7e44f2686bb3
Philippe Normand [Sun, 16 Aug 2015 12:53:42 +0000 (14:53 +0200)]
omxh264dec: implement is_format_change
The omxvideodecoder class only checks some of the caps parameters but if
other fields change such as h264 profile and/or level it wouldn't trigger a
reconfiguration.
https://bugzilla.gnome.org/show_bug.cgi?id=752376
Sejun Park [Fri, 31 Jul 2015 05:18:52 +0000 (14:18 +0900)]
Modify configuration for setting gstomx.conf
Change-Id: Ibc432bedef28da16acf3ddb96eb6258410a3e0bc
Sejun Park [Thu, 30 Jul 2015 12:21:37 +0000 (21:21 +0900)]
Fixed issue when operating with user mode
Change-Id: I7289dfa6ddf5437f3f88fa8278916e26e941c2b6
Sejun Park [Wed, 29 Jul 2015 12:18:54 +0000 (21:18 +0900)]
Add dump func. for debuffing & Fix build error
Change-Id: Ibbb59212d8b73e24f49417b71eb038232b45ac71
Signed-off-by: Sejun Park <sejun79.park@samsung.com>
Barun Kumar Singh [Thu, 16 Jul 2015 08:05:44 +0000 (13:35 +0530)]
Fixing "g_ptr_array_set_size" crash.
Increasing omx elements priority.
Signed-off-by: Barun Kumar Singh <barun.singh@samsung.com>
Change-Id: I388fa4d7bd3da9c60ed30fd4659815e5356a011b
Barun Kumar Singh [Tue, 14 Jul 2015 06:36:43 +0000 (12:06 +0530)]
Incorporating review comments.
Adding MMVideoBuffer support and fixing plane size calculation for H264
Signed-off-by: Barun Kumar Singh <barun.singh@samsung.com>
Change-Id: I7c7a85386a561956d1ea81119ec9b1ac48fc9b26
Aurélien Zanelli [Thu, 2 Jul 2015 22:26:48 +0000 (00:26 +0200)]
omxvideodec: unref allocator after getting it from allocation query
Otherwise a reference will be leaked for each allocator. It only happens
when target platform is Raspberry Pi and when we have GL support.
https://bugzilla.gnome.org/show_bug.cgi?id=751867
Stefan Sauer [Fri, 3 Jul 2015 19:59:54 +0000 (21:59 +0200)]
Automatic update of common submodule
From f74b2df to 9aed1d7
Nicolas Dufresne [Tue, 16 Jun 2015 21:50:14 +0000 (17:50 -0400)]
Automatic update of common submodule
From 6015d26 to f74b2df
Edward Hervey [Tue, 9 Jun 2015 09:30:49 +0000 (11:30 +0200)]
Automatic update of common submodule
From d9a3353 to 6015d26
Stefan Sauer [Mon, 8 Jun 2015 21:08:28 +0000 (23:08 +0200)]
Automatic update of common submodule
From d37af32 to d9a3353
Stefan Sauer [Sun, 7 Jun 2015 21:07:22 +0000 (23:07 +0200)]
Automatic update of common submodule
From 21ba2e5 to d37af32
Stefan Sauer [Sun, 7 Jun 2015 15:32:25 +0000 (17:32 +0200)]
Automatic update of common submodule
From c408583 to 21ba2e5
Stefan Sauer [Sun, 7 Jun 2015 15:16:43 +0000 (17:16 +0200)]
Automatic update of common submodule
From c8fb372 to c408583
Barun Kumar Singh [Thu, 21 May 2015 11:34:58 +0000 (17:04 +0530)]
Removing dependency of X11, dri2proto,libdri2, xfixes.
gbs build successful for wayland repository
Signed-off-by: Barun Kumar Singh <barun.singh@samsung.com>
Change-Id: I1c52142a6680db4e5649cf17e4a213950eae4db0
Barun Kumar Singh [Wed, 20 May 2015 09:11:38 +0000 (14:41 +0530)]
Fixing encoder plane size calculating.
Signed-off-by: Barun Kumar Singh <barun.singh@samsung.com>
Change-Id: I7a2eb58809b36ffbd585b8a35e33392acfdc6b9f
Sebastian Dröge [Tue, 19 May 2015 15:21:40 +0000 (18:21 +0300)]
omxaudiodec: Add an output adapter for chunking the output into codec frames
Otherwise the base class will be confused.
See https://bugzilla.gnome.org/show_bug.cgi?id=685730
Barun Kumar Singh [Mon, 18 May 2015 11:19:01 +0000 (16:49 +0530)]
Incorporating MPEG2 review comments.
Enabling h264 encoder.
Removing unnecessary commented code.
Signed-off-by: Barun Kumar Singh <barun.singh@samsung.com>
Change-Id: Ibe9ac74078bcb96d2b0c4b7f857dfe93b7b7dce0
Tim-Philipp Müller [Sun, 26 Apr 2015 17:24:13 +0000 (18:24 +0100)]
Remove obsolete Android build cruft
This is not needed any longer.
Sebastian Dröge [Wed, 22 Apr 2015 08:40:22 +0000 (10:40 +0200)]
Remove INSTALL file
autotools automatically generate this, and when using different versions
for autogen.sh there will always be changes to a file tracked by git.
Tim-Philipp Müller [Wed, 8 Apr 2015 14:57:59 +0000 (15:57 +0100)]
Add m4 directory so aclocal doesn't complain in autogen.sh
Might come in handy, and these warnings seem to be
fatal in some environments.
You may need to git clean -x -d -f your tree before
git pulling/merging.
Tim-Philipp Müller [Tue, 7 Apr 2015 21:25:57 +0000 (22:25 +0100)]
Update autogen.sh to latest version
Tim-Philipp Müller [Fri, 3 Apr 2015 17:58:17 +0000 (18:58 +0100)]
Automatic update of common submodule
From bc76a8b to c8fb372
Barun Kumar Singh [Fri, 27 Mar 2015 09:26:22 +0000 (14:56 +0530)]
Adding libtbm support.
Signed-off-by : Barun Kumar Singh <barun.singh@samsung.com>
Change-Id: Idefb94949ee67844cf38524a99d27935c0530973
Luis de Bethencourt [Fri, 6 Mar 2015 12:12:49 +0000 (12:12 +0000)]
omxaudiodec: add comment explaining duplicate code path
Luis de Bethencourt [Fri, 6 Mar 2015 12:09:06 +0000 (12:09 +0000)]
Revert "omxaudiodec: remove duplicate code path"
This reverts commit
a8d26ff27a8b43f589424a59294f9057641b2a46.
Luis de Bethencourt [Fri, 6 Mar 2015 12:03:56 +0000 (12:03 +0000)]
omx: handle both errors in the two steps of update_port_definition
Also consider potential errors in the _get_parameter() in the return of the
update_port_definition function.
CID #1287052
Luis de Bethencourt [Fri, 6 Mar 2015 10:57:53 +0000 (10:57 +0000)]
omxaudioenc: impossible if statement
ret is set to GST_STATE_CHANGE_SUCCESS and never touched, so it is impossible
for it to be anything else at the if check. Remove the if check.
CID #1287053
Luis de Bethencourt [Fri, 6 Mar 2015 10:54:43 +0000 (10:54 +0000)]
omxaudiodec: impossible if statement
ret is set to GST_STATE_CHANGE_SUCCESS and never touched, so it is impossible
for it to be anything else at the if check. Remove it.
CID #1287054
Luis de Bethencourt [Fri, 6 Mar 2015 10:50:30 +0000 (10:50 +0000)]
omxaudiodec: remove duplicate code path
George Kiagiadakis [Fri, 19 Dec 2014 09:19:55 +0000 (11:19 +0200)]
omx: call handle_messages() only once in acquire_buffer() to avoid potential deadlock
There is one rare case where calling handle_messages() more than once can cause a deadlock
in the video decoder element:
- sink pad thread starts the src pad task (gst_omx_video_dec_loop())
- _video_dec_loop() calls gst_omx_port_acquire_buffer() on dec_out_port
- blocks in gst_omx_component_wait_message() releasing comp->lock and comp->messages_lock
(initially, there are no buffers configured on that port, so it waits for OMX_EventPortSettingsChanged)
- the sink pad thread pushes a buffer to the decoder with gst_omx_port_release_buffer()
- _release_buffer() grabs comp->lock and sends the buffer to OMX, which consumes it immediately
- EmptyBufferDone gets called at this point, which signals _wait_message() to unblock
- the message from EmptyBufferDone is processed in gst_omx_component_handle_messages()
called from gst_omx_port_release_buffer()
- gst_omx_port_release_buffer releases comp->lock
- the src pad thread now gets to run, grabbing comp->lock while it exits from _wait_message()
- _acquire_buffer() calls the _handle_messages() on the next line after _wait_message(),
which does nothing (no pending messages)
- then it goes to "retry:" and calls _handle_messages() again, which also does nothing
(still no pending messages)
- scheduler switches to a videocore thread that calls EventHandler, informing us about the
OMX_EventPortSettingsChanged event that just arrived
- EventHandler graps comp->messages_lock, but not comp->lock, so it can run in parallel at
this point just fine.
- scheduler switches back to the src pad thread (which is in the middle of _acquire_buffer())
- the next _handle_messages() which is right before if (g_queue_is_empty (&port->pending_buffers))
processes the OMX_EventPortSettingsChanged
- the buffer queue is still empty, so that thread blocks again in _wait_message()
- the sink pad thread tries to acquire the next input port buffer
- _acquire_buffer() also blocks this thread in:
if (comp->pending_reconfigure_outports) { ... _wait_message() ... }
- DEADLOCK. gstreamer is waiting for omx to do something, omx waits for gstreamer to do something.
By removing those extra _handle_messages() calls, we can ensure that all the checks of
_acquire_buffer() will re-run. In the above case, after the scheduler switches back to
the middle of _acquire_buffer(), the code will enter _wait_message(), which will see that
there are pending messages and will return immediately, going back to "retry:" and
re-doing all the checks properly.
https://bugzilla.gnome.org/show_bug.cgi?id=741854
Wonchul Lee [Thu, 26 Feb 2015 00:27:44 +0000 (09:27 +0900)]
omx: cleanup code a bit to remove else statement
https://bugzilla.gnome.org/show_bug.cgi?id=745191
Stefan Sauer [Mon, 12 Jan 2015 15:13:35 +0000 (16:13 +0100)]
Automatic update of common submodule
From f2c6b95 to bc76a8b
Sebastian Dröge [Thu, 18 Dec 2014 09:56:15 +0000 (10:56 +0100)]
Automatic update of common submodule
From ef1ffdc to f2c6b95
Edward Hervey [Thu, 27 Nov 2014 16:12:42 +0000 (17:12 +0100)]
Automatic update of common submodule
From 7bb2bce to ef1ffdc
Jun Ji [Thu, 13 Nov 2014 00:55:02 +0000 (09:55 +0900)]
omx: Add omxamrdec
https://bugzilla.gnome.org/show_bug.cgi?id=739333
Kazunori Kobayashi [Thu, 27 Jun 2013 12:59:29 +0000 (21:59 +0900)]
omx: Fix a missing g_free() in error path
This fixes a memory leak with g_strdup() when an error occurs.
https://bugzilla.gnome.org/show_bug.cgi?id=731141
Change-Id: I333df2cc1197e2c04ca65f2f82889e9ce7c975d2
Signed-off-by: Kazunori Kobayashi <kkobayas@igel.co.jp>
Sebastian Dröge [Mon, 27 Oct 2014 17:00:50 +0000 (18:00 +0100)]
Automatic update of common submodule
From 84d06cd to 7bb2bce
Tim-Philipp Müller [Tue, 21 Oct 2014 12:03:44 +0000 (13:03 +0100)]
Automatic update of common submodule
From a8c8939 to 84d06cd
Stefan Sauer [Tue, 21 Oct 2014 11:00:10 +0000 (13:00 +0200)]
Automatic update of common submodule
From 1f5d3c3 to a8c8939
Sebastian Dröge [Tue, 30 Sep 2014 07:47:20 +0000 (10:47 +0300)]
omxaudiodec: Clean up code a bit to get rid of useless NULL checks
junji [Tue, 30 Sep 2014 01:50:07 +0000 (10:50 +0900)]
omxaudiodec: Unmap input buffers after usage
https://bugzilla.gnome.org/show_bug.cgi?id=736314
Michal Lazo [Sun, 31 Aug 2014 20:30:13 +0000 (20:30 +0000)]
omxvideoenc: Setup aspect ratio on RPi
Needs firmware from yesterday or newer to work with all possible
aspect ratios. Before that it only supported a fixed list.
https://bugzilla.gnome.org/show_bug.cgi?id=732533
Sebastian Dröge [Thu, 28 Aug 2014 07:44:31 +0000 (10:44 +0300)]
omxaudioenc: Implement the hack flag GST_OMX_HACK_NO_COMPONENT_RECONFIGURE
Sebastian Dröge [Thu, 28 Aug 2014 07:43:22 +0000 (10:43 +0300)]
omxaudioenc: Use the base class' open/close vfuncs instead of calling them ourselves
Peng Liu [Wed, 27 Aug 2014 03:13:53 +0000 (22:13 -0500)]
omxvideoenc: Implement the hack flag GST_OMX_HACK_NO_COMPONENT_RECONFIGURE
Fix a video encoder stall problem on RPi when changing the aspect ratio.
https://bugzilla.gnome.org/show_bug.cgi?id=732533
Sebastian Dröge [Thu, 14 Aug 2014 14:36:11 +0000 (17:36 +0300)]
omx: Let base classes handle EOS
https://bugzilla.gnome.org//show_bug.cgi?id=734774
Sebastian Dröge [Thu, 14 Aug 2014 14:33:07 +0000 (17:33 +0300)]
omxaudiodec: Fix flushing logic and make it more similar to the video decoder
Sebastian Dröge [Wed, 23 Jul 2014 09:28:12 +0000 (11:28 +0200)]
Release 1.2.0
Sebastian Dröge [Tue, 22 Jul 2014 07:23:00 +0000 (09:23 +0200)]
config: Update ranks to PRIMARY+1 to have higher preference than avdec_*
See https://bugzilla.gnome.org/show_bug.cgi?id=732161
Sebastian Dröge [Sun, 20 Jul 2014 15:46:30 +0000 (17:46 +0200)]
omxaudiosink: Set port to not flushing in prepare() and keep it at flushing in unprepare()
https://bugzilla.gnome.org/show_bug.cgi?id=733168
Sebastian Dröge [Sun, 13 Jul 2014 20:15:18 +0000 (22:15 +0200)]
omxaudiodec: Implement setting of fallback channel positions
Sebastian Dröge [Sun, 13 Jul 2014 16:22:39 +0000 (18:22 +0200)]
omx: Add AAC audio decoder
Andrey Shelest [Mon, 23 Jun 2014 16:09:39 +0000 (19:09 +0300)]
Added Samsung specific code.
Change-Id: Ibfd412781bd521ba3e15a5046ce0db660a02ca61
Sebastian Dröge [Wed, 2 Jul 2014 07:22:28 +0000 (09:22 +0200)]
omxaudiodec: Get PCM parameters from the out port, not the in port
Sebastian Dröge [Thu, 15 May 2014 11:24:39 +0000 (13:24 +0200)]
omxaudiodec: Implement hack for not disabling the output port after set_format until the output format is known
Needed on some OMX implementations, e.g. the one from Atmel. It does
not send the settings-changed event on the output port if it is
disabled.
Sebastian Dröge [Sat, 10 May 2014 21:12:54 +0000 (23:12 +0200)]
omx: Add audio decoder base class and a subclass for MP3
Sebastian Dröge [Tue, 1 Jul 2014 07:38:01 +0000 (09:38 +0200)]
omx: Link to gmodule-2.0-no-export for being able to use the g_module_*() API
https://bugzilla.gnome.org/show_bug.cgi?id=732518
Sebastian Dröge [Mon, 30 Jun 2014 13:00:54 +0000 (15:00 +0200)]
examples: #define GST_USE_UNSTABLE_API for libgstgl
Sebastian Dröge [Sun, 29 Jun 2014 17:10:19 +0000 (19:10 +0200)]
omxh264enc: Properly accumulate headers and push before the next frame
Fixes output of encoding on RPi, where each header buffer (SPS and PPS)
is in a separate OMX buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=726669
Sebastian Dröge [Sun, 29 Jun 2014 17:04:54 +0000 (19:04 +0200)]
omxvideoenc: Implement flush() instead of the deprecated reset()
Sebastian Dröge [Wed, 25 Jun 2014 15:14:18 +0000 (17:14 +0200)]
rpi: It's 44100Hz, not 41400Hz
Julien Isorce [Wed, 25 Jun 2014 10:12:51 +0000 (11:12 +0100)]
configure.ac: require gstgl >= 1.3.3
Julien Isorce [Fri, 25 Apr 2014 12:25:05 +0000 (13:25 +0100)]
example: enable testegl
See https://bugzilla.gnome.org/show_bug.cgi?id=728940
Julien Isorce [Wed, 25 Jun 2014 09:19:54 +0000 (10:19 +0100)]
testegl: do matrix mutlplication in the shader
See https://bugzilla.gnome.org/show_bug.cgi?id=728940
Julien Isorce [Wed, 25 Jun 2014 08:36:38 +0000 (09:36 +0100)]
testegl: add a comment for the parse command
See https://bugzilla.gnome.org/show_bug.cgi?id=728940
Julien Isorce [Fri, 25 Apr 2014 16:32:16 +0000 (17:32 +0100)]
testegl: convert code from GLESv1 to GLESv2
See https://bugzilla.gnome.org/show_bug.cgi?id=728940
Julien Isorce [Fri, 25 Apr 2014 12:21:59 +0000 (13:21 +0100)]
testegl: port to gstgl API
- append a glfilter just before fakesink
So that we get gltexture or eglimages
- propagate our EGLDisplay to the pipeline
see GST_QUERY_CONTEXT
- share our EGLContext with the iternal gl context
of the pipeline, see GST_QUERY_ALLOCATION
- use GstVideoGLTextureUploadMeta to upload
the incoming gltexture or eglimage to our gl texture
TODO: convert from GLESv1 to GLESv2
See https://bugzilla.gnome.org/show_bug.cgi?id=728940
Sebastian Dröge [Tue, 24 Jun 2014 12:52:58 +0000 (14:52 +0200)]
omxbufferpool: Copy buffers if the stride does not match and we can't use video meta
https://bugzilla.gnome.org/show_bug.cgi?id=731672
Sebastian Dröge [Tue, 24 Jun 2014 12:52:43 +0000 (14:52 +0200)]
omx: Only include OMX_VideoExt.h conditionally
It does not exist on the RPi for example.
Sebastian Dröge [Tue, 24 Jun 2014 11:59:44 +0000 (13:59 +0200)]
configure.ac: Require GStreamer core/base >= 1.2.2
Needed at least for gst_video_decoder_release_frame().
Sebastian Dröge [Tue, 24 Jun 2014 11:02:13 +0000 (13:02 +0200)]
omxbufferpool: Fix format string compiler warning
Michal Lazo [Sun, 22 Jun 2014 21:11:45 +0000 (21:11 +0000)]
omxbufferpool: Initialize debug category
Sebastian Dröge [Tue, 24 Jun 2014 10:42:22 +0000 (12:42 +0200)]
omxbufferpool: Properly convert OMX alignment to GStreamer alignment
GStreamer uses a bitmask for the alignment while OMX uses the
alignment itself. Let's convert.
https://bugzilla.gnome.org/show_bug.cgi?id=710564
Sebastian Dröge [Tue, 24 Jun 2014 09:11:28 +0000 (11:11 +0200)]
omxh264enc: Don't let baseclass finish frames for SPS/PPS buffers
Otherwise we a) send them twice, and b) finish a frame for something
that does not even include a frame.
https://bugzilla.gnome.org/show_bug.cgi?id=726669
Sebastian Dröge [Tue, 24 Jun 2014 08:22:37 +0000 (10:22 +0200)]
omxvideo: Include the separate headers too for compatibility with 1.0.x
Zhao, Halley [Mon, 24 Mar 2014 08:09:40 +0000 (16:09 +0800)]
omxvp8dec: use VP8 definition from OMX_VideoExt.h
https://bugzilla.gnome.org/show_bug.cgi?id=726957
Zhao, Halley [Mon, 24 Mar 2014 07:33:26 +0000 (15:33 +0800)]
configure: add --with-omx-header-path option for external omx headers
https://bugzilla.gnome.org/show_bug.cgi?id=726957
Aurélien Zanelli [Wed, 18 Jun 2014 21:04:33 +0000 (23:04 +0200)]
omxvideodec: fix a query leak
Also add a debug message if query fails.
https://bugzilla.gnome.org/show_bug.cgi?id=731898
Aurélien Zanelli [Fri, 30 May 2014 13:29:15 +0000 (15:29 +0200)]
omxvideodec: release frames with old PTS to avoid memory issue
Interlaced stream could make the decoder use two input frames to produce
one output frame causing the gstvideodecoder frame list to grow.
Assuming the video decoder output frame in display order rather than in
decoding order, this commit add a way to release frames with PTS less
than current output frame.
https://bugzilla.gnome.org/show_bug.cgi?id=730995
Kazunori Kobayashi [Thu, 27 Jun 2013 12:59:29 +0000 (21:59 +0900)]
omx: Fix a missing g_free() in error path
This fixes a memory leak with g_strdup() when an error occurs.
https://bugzilla.gnome.org/show_bug.cgi?id=731141
Aurélien Zanelli [Mon, 2 Jun 2014 13:34:09 +0000 (15:34 +0200)]
omxvideodec: add missing stream unlock in error path
Sebastian Dröge [Sat, 31 May 2014 13:12:05 +0000 (15:12 +0200)]
omx: Don't handle disabling/enabling ports exactly like flushing
Otherwise we might abort a flush operation in another thread when
enabling/disabling ports, leading to deadlocks sometimes.
https://bugzilla.gnome.org/show_bug.cgi?id=730989
Sebastian Dröge [Mon, 26 May 2014 09:02:10 +0000 (11:02 +0200)]
omxvideodec: Don't leak buffer pool config in error cases
CID 1216158