Bitterblue Smith [Sun, 8 Jan 2023 15:06:43 +0000 (17:06 +0200)]
wifi: rtl8xxxu: Report the RSSI to the firmware
Or in the case of RTL8188EU, report the RSSI to the rate control code.
The rate control code for RTL8188EU is less likely to switch to a lower
rate when the RSSI is high. The firmware-based rate control in the other
chips probably works the same way.
This affects all the chips, but it was only tested with RTL8188EU,
RTL8188FU, and RTL8192EU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/2aab4f3f-e914-4fe1-f29a-deac91774d05@gmail.com
Jiapeng Chong [Fri, 6 Jan 2023 02:27:31 +0000 (10:27 +0800)]
wifi: rt2x00: Remove useless else if
The assignment of the else and else if branches is the same, so the else
if here is redundant, so we remove it.
./drivers/net/wireless/ralink/rt2x00/rt2800lib.c:8927:9-11: WARNING:
possible condition with no effect (if == else).
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3631
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230106022731.111243-1-jiapeng.chong@linux.alibaba.com
Jisoo Jang [Thu, 29 Dec 2022 09:29:06 +0000 (18:29 +0900)]
wifi: mt7601u: fix an integer underflow
Fix an integer underflow that leads to a null pointer dereference in
'mt7601u_rx_skb_from_seg()'. The variable 'dma_len' in the URB packet
could be manipulated, which could trigger an integer underflow of
'seg_len' in 'mt7601u_rx_process_seg()'. This underflow subsequently
causes the 'bad_frame' checks in 'mt7601u_rx_skb_from_seg()' to be
bypassed, eventually leading to a dereference of the pointer 'p', which
is a null pointer.
Ensure that 'dma_len' is greater than 'min_seg_len'.
Found by a modified version of syzkaller.
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 12 Comm: ksoftirqd/0 Tainted: G W O 5.14.0+
#139
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
RIP: 0010:skb_add_rx_frag+0x143/0x370
Code: e2 07 83 c2 03 38 ca 7c 08 84 c9 0f 85 86 01 00 00 4c 8d 7d 08 44
89 68 08 48 b8 00 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 <80> 3c 02
00 0f 85 cd 01 00 00 48 8b 45 08 a8 01 0f 85 3d 01 00 00
RSP: 0018:
ffffc900000cfc90 EFLAGS:
00010202
RAX:
dffffc0000000000 RBX:
ffff888115520dc0 RCX:
0000000000000000
RDX:
0000000000000001 RSI:
ffff8881118430c0 RDI:
ffff8881118430f8
RBP:
0000000000000000 R08:
0000000000000e09 R09:
0000000000000010
R10:
ffff888111843017 R11:
ffffed1022308602 R12:
0000000000000000
R13:
0000000000000e09 R14:
0000000000000010 R15:
0000000000000008
FS:
0000000000000000(0000) GS:
ffff88811a800000(0000)
knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
000000004035af40 CR3:
00000001157f2000 CR4:
0000000000750ef0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
PKRU:
55555554
Call Trace:
mt7601u_rx_tasklet+0xc73/0x1270
? mt7601u_submit_rx_buf.isra.0+0x510/0x510
? tasklet_action_common.isra.0+0x79/0x2f0
tasklet_action_common.isra.0+0x206/0x2f0
__do_softirq+0x1b5/0x880
? tasklet_unlock+0x30/0x30
run_ksoftirqd+0x26/0x50
smpboot_thread_fn+0x34f/0x7d0
? smpboot_register_percpu_thread+0x370/0x370
kthread+0x3a1/0x480
? set_kthread_struct+0x120/0x120
ret_from_fork+0x1f/0x30
Modules linked in: 88XXau(O) 88x2bu(O)
---[ end trace
57f34f93b4da0f9b ]---
RIP: 0010:skb_add_rx_frag+0x143/0x370
Code: e2 07 83 c2 03 38 ca 7c 08 84 c9 0f 85 86 01 00 00 4c 8d 7d 08 44
89 68 08 48 b8 00 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 <80> 3c 02
00 0f 85 cd 01 00 00 48 8b 45 08 a8 01 0f 85 3d 01 00 00
RSP: 0018:
ffffc900000cfc90 EFLAGS:
00010202
RAX:
dffffc0000000000 RBX:
ffff888115520dc0 RCX:
0000000000000000
RDX:
0000000000000001 RSI:
ffff8881118430c0 RDI:
ffff8881118430f8
RBP:
0000000000000000 R08:
0000000000000e09 R09:
0000000000000010
R10:
ffff888111843017 R11:
ffffed1022308602 R12:
0000000000000000
R13:
0000000000000e09 R14:
0000000000000010 R15:
0000000000000008
FS:
0000000000000000(0000) GS:
ffff88811a800000(0000)
knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
000000004035af40 CR3:
00000001157f2000 CR4:
0000000000750ef0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
PKRU:
55555554
Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221229092906.2328282-1-jisoo.jang@yonsei.ac.kr
Alexey Kodanev [Tue, 27 Dec 2022 13:33:06 +0000 (16:33 +0300)]
wifi: orinoco: check return value of hermes_write_wordrec()
There is currently no return check for writing an authentication
type (HERMES_AUTH_SHARED_KEY or HERMES_AUTH_OPEN). It looks like
it was accidentally skipped.
This patch adds a return check similar to the other checks in
__orinoco_hw_setup_enc() for hermes_write_wordrec().
Detected using the static analysis tool - Svace.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221227133306.201356-1-aleksei.kodanev@bell-sw.com
Konstantin Ryabitsev [Fri, 23 Dec 2022 18:20:23 +0000 (13:20 -0500)]
wifi: rtlwifi: rtl8723ae: fix obvious spelling error tyep->type
This appears to be an obvious spelling error, initially identified in a
codespell report and never addressed.
Reported-by: Jens Schleusener <Jens.Schleusener@fossies.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205891
Signed-off-by: Konstantin Ryabitsev <icon@mricon.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221222-rtl8723ae-typo-fix-v2-1-71b6b67df3f5@mricon.com
Bitterblue Smith [Thu, 22 Dec 2022 11:48:04 +0000 (13:48 +0200)]
wifi: rtl8xxxu: Fix memory leaks with RTL8723BU, RTL8192EU
The wifi + bluetooth combo chip RTL8723BU can leak memory (especially?)
when it's connected to a bluetooth audio device. The busy bluetooth
traffic generates lots of C2H (card to host) messages, which are not
freed correctly.
To fix this, move the dev_kfree_skb() call in rtl8xxxu_c2hcmd_callback()
inside the loop where skb_dequeue() is called.
The RTL8192EU leaks memory because the C2H messages are added to the
queue and left there forever. (This was fine in the past because it
probably wasn't sending any C2H messages until commit
e542e66b7c2e
("wifi: rtl8xxxu: gen2: Turn on the rate control"). Since that commit
it sends a C2H message when the TX rate changes.)
To fix this, delete the check for rf_paths > 1 and the goto. Let the
function process the C2H messages from RTL8192EU like the ones from
the other chips.
Theoretically the RTL8188FU could also leak like RTL8723BU, but it
most likely doesn't send C2H messages frequently enough.
This change was tested with RTL8723BU by Erhard F. I tested it with
RTL8188FU and RTL8192EU.
Reported-by: Erhard F. <erhard_f@mailbox.org>
Tested-by: Erhard F. <erhard_f@mailbox.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215197
Fixes:
e542e66b7c2e ("rtl8xxxu: add bluetooth co-existence support for single antenna")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/03b099c1-c671-d252-36f4-57b70d721f9d@gmail.com
Zong-Zhe Yang [Fri, 13 Jan 2023 09:06:32 +0000 (17:06 +0800)]
wifi: rtw89: 8852b: fill the missing configuration about queue empty checking
The configurations, wde_qempty_acq_num and wde_qempty_mgq_sel, are used
when MAC checks if TX queues are empty. Fill the corresponding setting
for 8852B.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230113090632.60957-5-pkshih@realtek.com
Zong-Zhe Yang [Fri, 13 Jan 2023 09:06:31 +0000 (17:06 +0800)]
wifi: rtw89: fix assignation of TX BD RAM table
TX BD's RAM table describes how HW allocates usable buffer section
for each TX channel at fetch time. The total RAM size for TX BD is
chip-dependent. For 8852BE, it has only half size (32) for TX channels
of single band. Original table arrange total size (64) for dual band.
It will overflow on 8852BE circuit and cause section conflicts between
different TX channels.
So, we do the changes below.
* add another table for single band chip and export both kind of tables
* point to the expected one in rtw89_pci_info by chip
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230113090632.60957-4-pkshih@realtek.com
Chih-Kang Chang [Fri, 13 Jan 2023 09:06:30 +0000 (17:06 +0800)]
wifi: rtw89: 8852c: rfk: correct ADC clock settings
Some hardware modules don't have good RF characteristic as regular.
It could get ADC abnormal in low temperature, and it causes bad RX
performance and affects calibration result of DPK.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230113090632.60957-3-pkshih@realtek.com
Eric Huang [Fri, 13 Jan 2023 09:06:29 +0000 (17:06 +0800)]
wifi: rtw89: correct register definitions of digital CFO and spur elimination
This change fixes the precision of CFO and TX EVM, and it could imporve
performance in some cases. Also, use the correctted definition for 8852A.
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230113090632.60957-2-pkshih@realtek.com
Kuan-Chung Chen [Fri, 6 Jan 2023 12:15:17 +0000 (20:15 +0800)]
wifi: rtw89: set the correct mac_id for management frames
The mac_id of management frames should follow rtwvif->mac_id or
rtwsta->mac_id. Add this patch to set the correct mac_id and
prevent unexpected behavior.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230106121517.19841-2-pkshih@realtek.com
Kuan-Chung Chen [Fri, 6 Jan 2023 12:15:16 +0000 (20:15 +0800)]
wifi: rtw89: fix null vif pointer when get management frame date rate
When transmitting a packet that gets from ieee80211_nullfunc_get(),
the vif in tx_info->control was no assigned, which will cause
dereferencing a null pointer.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230106121517.19841-1-pkshih@realtek.com
Ching-Te Ku [Fri, 6 Jan 2023 12:08:44 +0000 (20:08 +0800)]
wifi: rtw89: coex: Change Wi-Fi role info related logic to version separate
The Wi-Fi role info structure will need to H2C to firmware, firmware
need these information to do some multi-role operation. v1 add DBCC
and NOA information in the structure. And driver side also need to
put/get values at the corresponding version of structure.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230106120844.17441-8-pkshih@realtek.com
Ching-Te Ku [Fri, 6 Jan 2023 12:08:43 +0000 (20:08 +0800)]
wifi: rtw89: coex: Change RTL8852B use v1 TDMA policy
RTL8852B support the new features like TDMA instant (Change TDMA mechanism
immediately), Co-RX feature (Wi-Fi/Bluetooth can RX in the same time) and
so on. The v1 TDMA policy will enable those newer mechanism. It will have
a better coexistence performance.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230106120844.17441-7-pkshih@realtek.com
Ching-Te Ku [Fri, 6 Jan 2023 12:08:42 +0000 (20:08 +0800)]
wifi: rtw89: coex: Packet traffic arbitration hardware owner monitor
Because the difference of the hardware design, RTL8852C can not get the
PTA owner by the same method with RTL8852B, RTL8852A. Modify the get owner
API and related logic.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230106120844.17441-6-pkshih@realtek.com
Ching-Te Ku [Fri, 6 Jan 2023 12:08:41 +0000 (20:08 +0800)]
wifi: rtw89: coex: refactor debug log of slot list
Slot list is to list the WiFi/Bluetooth PTA hardware priority setting.
Move the list parser to its function, not to append together with TDMA
parser.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230106120844.17441-5-pkshih@realtek.com
Ching-Te Ku [Fri, 6 Jan 2023 12:08:40 +0000 (20:08 +0800)]
wifi: rtw89: coex: Change firmware steps report to version separate
The report records the slots/events and their time cost about the code
call flow at firmware, ver 3 assign a reserved variable to recognize
the report is enabled or not. And add corresponding function to parsing
the report.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230106120844.17441-4-pkshih@realtek.com
Ching-Te Ku [Fri, 6 Jan 2023 12:08:39 +0000 (20:08 +0800)]
wifi: rtw89: coex: Change Wi-Fi Null data report to version separate
Coexistence need to send Null data to stop AP keeps TX packet to DUT
before DUT coexistence switch to Bluetooth time slot, or it will be an
interference to DUT BT and because DUT will not RX packet from AP
the packet retry may harmful to WL TP. Compare to v1 version, the newer
firmware report will also report Null TX data counter.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230106120844.17441-3-pkshih@realtek.com
Ching-Te Ku [Fri, 6 Jan 2023 12:08:38 +0000 (20:08 +0800)]
wifi: rtw89: coex: Add version code for Wi-Fi firmware coexistence control
The newer Wi-Fi firmware are all changed to "Not to send H2C to
mention firmware how many call flow step should firmware trace".
The structure had removed the member, and define the steps number
at newer version firmware.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230106120844.17441-2-pkshih@realtek.com
Jiasheng Jiang [Wed, 4 Jan 2023 14:29:01 +0000 (22:29 +0800)]
wifi: rtw89: Add missing check for alloc_workqueue
Add check for the return value of alloc_workqueue since it may return
NULL pointer.
Moreover, add destroy_workqueue when rtw89_load_firmware fails.
Fixes:
e3ec7017f6a2 ("rtw89: add Realtek 802.11ax driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230104142901.1611-1-jiasheng@iscas.ac.cn
Zong-Zhe Yang [Tue, 3 Jan 2023 14:10:54 +0000 (22:10 +0800)]
wifi: rtw89: fix potential leak in rtw89_append_probe_req_ie()
Do `kfree_skb(new)` before `goto out` to prevent potential leak.
Fixes:
895907779752 ("rtw89: 8852a: add ieee80211_ops::hw_scan")
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230103141054.17372-1-pkshih@realtek.com
Ching-Te Ku [Tue, 3 Jan 2023 14:02:38 +0000 (22:02 +0800)]
wifi: rtw89: coex: Update WiFi role info H2C report
Change style to feature version separate. And because there are
different WiFi roles number in the firmware, it will make structure
length longer or shorter, so update the length calculator to cover
the difference.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230103140238.15601-8-pkshih@realtek.com
Ching-Te Ku [Tue, 3 Jan 2023 14:02:37 +0000 (22:02 +0800)]
wifi: rtw89: coex: only read Bluetooth counter of report version 1 for RTL8852A
Only when firmware control report version is 1, need to get the counter by
reading the register. The other version will monitor the counter at
firmware. And upstream branch only RTL8852A has this old version.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230103140238.15601-7-pkshih@realtek.com
Ching-Te Ku [Tue, 3 Jan 2023 14:02:36 +0000 (22:02 +0800)]
wifi: rtw89: coex: Add v5 firmware control report
Comparing v5 control report to v4 version, v5 reduce some of variable's
size to reduce firmware code size. And change the grant signal report
format.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230103140238.15601-6-pkshih@realtek.com
Ching-Te Ku [Tue, 3 Jan 2023 14:02:35 +0000 (22:02 +0800)]
wifi: rtw89: coex: Change firmware control report to version separate
The rtw89 driver may support more than 1 version of Wi-Fi firmware for
certain chips. In order to support all the firmware, change to select logic
by firmware feature version code. Type control version 4 will monitor
Bluetooth PTA hardware counters at firmware and C2H to driver, but
version 1 will not do this.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230103140238.15601-5-pkshih@realtek.com
Ching-Te Ku [Tue, 3 Jan 2023 14:02:34 +0000 (22:02 +0800)]
wifi: rtw89: coex: Add v4 version firmware cycle report
To support v4 version firmware cycle report, apply the related
structure and functions. v4 cycle report add a group of status
to show how the free-run/TDMA training goes to. It is a firmware
mechanism that can auto adjust coexistence mode between TDMA and
free run mechanism at 3 antenna solution.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230103140238.15601-4-pkshih@realtek.com
Ching-Te Ku [Tue, 3 Jan 2023 14:02:33 +0000 (22:02 +0800)]
wifi: rtw89: coex: Rename BTC firmware cycle report by feature version
Because there are new report format in the upcoming patches, to make the
logic more readable, rename the related structure by their version number.
And to support the several version at the same time, add union definition
to include all the versions.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230103140238.15601-3-pkshih@realtek.com
Ching-Te Ku [Tue, 3 Jan 2023 14:02:32 +0000 (22:02 +0800)]
wifi: rtw89: coex: Remove le32 to CPU translator at firmware cycle report
There are at least 2 version of cycle report format. If the code keep
translating the report to local variable, the numbers of variable in
check btc report function will out of maximum variable numbers. And
most of these variable are using only one time, it is not necessary
to store at memory.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230103140238.15601-2-pkshih@realtek.com
Masanari Iida [Fri, 23 Dec 2022 10:20:58 +0000 (19:20 +0900)]
wifi: rtw89: Fix a typo in debug message
This patch fixes a spelling typo in debug message.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221223102058.162179-1-standby24x7@gmail.com
Jisoo Jang [Fri, 30 Dec 2022 07:51:39 +0000 (16:51 +0900)]
wifi: brcmfmac: ensure CLM version is null-terminated to prevent stack-out-of-bounds
Fix a stack-out-of-bounds read in brcmfmac that occurs
when 'buf' that is not null-terminated is passed as an argument of
strreplace() in brcmf_c_preinit_dcmds(). This buffer is filled with
a CLM version string by memcpy() in brcmf_fil_iovar_data_get().
Ensure buf is null-terminated.
Found by a modified version of syzkaller.
[ 33.004414][ T1896] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 33.013486][ T1896] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43236/3 wl0: Nov 30 2011 17:33:42 version 5.90.188.22
[ 33.021554][ T1896] ==================================================================
[ 33.022379][ T1896] BUG: KASAN: stack-out-of-bounds in strreplace+0xf2/0x110
[ 33.023122][ T1896] Read of size 1 at addr
ffffc90001d6efc8 by task kworker/0:2/1896
[ 33.023852][ T1896]
[ 33.024096][ T1896] CPU: 0 PID: 1896 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132
[ 33.024927][ T1896] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[ 33.026065][ T1896] Workqueue: usb_hub_wq hub_event
[ 33.026581][ T1896] Call Trace:
[ 33.026896][ T1896] dump_stack_lvl+0x57/0x7d
[ 33.027372][ T1896] print_address_description.constprop.0.cold+0xf/0x334
[ 33.028037][ T1896] ? strreplace+0xf2/0x110
[ 33.028403][ T1896] ? strreplace+0xf2/0x110
[ 33.028807][ T1896] kasan_report.cold+0x83/0xdf
[ 33.029283][ T1896] ? strreplace+0xf2/0x110
[ 33.029666][ T1896] strreplace+0xf2/0x110
[ 33.029966][ T1896] brcmf_c_preinit_dcmds+0xab1/0xc40
[ 33.030351][ T1896] ? brcmf_c_set_joinpref_default+0x100/0x100
[ 33.030787][ T1896] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 33.031223][ T1896] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 33.031661][ T1896] ? lock_acquire+0x19d/0x4e0
[ 33.032091][ T1896] ? find_held_lock+0x2d/0x110
[ 33.032605][ T1896] ? brcmf_usb_deq+0x1a7/0x260
[ 33.033087][ T1896] ? brcmf_usb_rx_fill_all+0x5a/0xf0
[ 33.033582][ T1896] brcmf_attach+0x246/0xd40
[ 33.034022][ T1896] ? wiphy_new_nm+0x1476/0x1d50
[ 33.034383][ T1896] ? kmemdup+0x30/0x40
[ 33.034722][ T1896] brcmf_usb_probe+0x12de/0x1690
[ 33.035223][ T1896] ? brcmf_usbdev_qinit.constprop.0+0x470/0x470
[ 33.035833][ T1896] usb_probe_interface+0x25f/0x710
[ 33.036315][ T1896] really_probe+0x1be/0xa90
[ 33.036656][ T1896] __driver_probe_device+0x2ab/0x460
[ 33.037026][ T1896] ? usb_match_id.part.0+0x88/0xc0
[ 33.037383][ T1896] driver_probe_device+0x49/0x120
[ 33.037790][ T1896] __device_attach_driver+0x18a/0x250
[ 33.038300][ T1896] ? driver_allows_async_probing+0x120/0x120
[ 33.038986][ T1896] bus_for_each_drv+0x123/0x1a0
[ 33.039906][ T1896] ? bus_rescan_devices+0x20/0x20
[ 33.041412][ T1896] ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[ 33.041861][ T1896] ? trace_hardirqs_on+0x1c/0x120
[ 33.042330][ T1896] __device_attach+0x207/0x330
[ 33.042664][ T1896] ? device_bind_driver+0xb0/0xb0
[ 33.043026][ T1896] ? kobject_uevent_env+0x230/0x12c0
[ 33.043515][ T1896] bus_probe_device+0x1a2/0x260
[ 33.043914][ T1896] device_add+0xa61/0x1ce0
[ 33.044227][ T1896] ? __mutex_unlock_slowpath+0xe7/0x660
[ 33.044891][ T1896] ? __fw_devlink_link_to_suppliers+0x550/0x550
[ 33.045531][ T1896] usb_set_configuration+0x984/0x1770
[ 33.046051][ T1896] ? kernfs_create_link+0x175/0x230
[ 33.046548][ T1896] usb_generic_driver_probe+0x69/0x90
[ 33.046931][ T1896] usb_probe_device+0x9c/0x220
[ 33.047434][ T1896] really_probe+0x1be/0xa90
[ 33.047760][ T1896] __driver_probe_device+0x2ab/0x460
[ 33.048134][ T1896] driver_probe_device+0x49/0x120
[ 33.048516][ T1896] __device_attach_driver+0x18a/0x250
[ 33.048910][ T1896] ? driver_allows_async_probing+0x120/0x120
[ 33.049437][ T1896] bus_for_each_drv+0x123/0x1a0
[ 33.049814][ T1896] ? bus_rescan_devices+0x20/0x20
[ 33.050164][ T1896] ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[ 33.050579][ T1896] ? trace_hardirqs_on+0x1c/0x120
[ 33.050936][ T1896] __device_attach+0x207/0x330
[ 33.051399][ T1896] ? device_bind_driver+0xb0/0xb0
[ 33.051888][ T1896] ? kobject_uevent_env+0x230/0x12c0
[ 33.052314][ T1896] bus_probe_device+0x1a2/0x260
[ 33.052688][ T1896] device_add+0xa61/0x1ce0
[ 33.053121][ T1896] ? __fw_devlink_link_to_suppliers+0x550/0x550
[ 33.053568][ T1896] usb_new_device.cold+0x463/0xf66
[ 33.053953][ T1896] ? hub_disconnect+0x400/0x400
[ 33.054313][ T1896] ? rwlock_bug.part.0+0x90/0x90
[ 33.054661][ T1896] ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[ 33.055094][ T1896] hub_event+0x10d5/0x3330
[ 33.055530][ T1896] ? hub_port_debounce+0x280/0x280
[ 33.055934][ T1896] ? __lock_acquire+0x1671/0x5790
[ 33.056387][ T1896] ? wq_calc_node_cpumask+0x170/0x2a0
[ 33.056924][ T1896] ? lock_release+0x640/0x640
[ 33.057383][ T1896] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 33.057916][ T1896] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 33.058402][ T1896] ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[ 33.059019][ T1896] process_one_work+0x873/0x13e0
[ 33.059488][ T1896] ? lock_release+0x640/0x640
[ 33.059932][ T1896] ? pwq_dec_nr_in_flight+0x320/0x320
[ 33.060446][ T1896] ? rwlock_bug.part.0+0x90/0x90
[ 33.060898][ T1896] worker_thread+0x8b/0xd10
[ 33.061348][ T1896] ? __kthread_parkme+0xd9/0x1d0
[ 33.061810][ T1896] ? process_one_work+0x13e0/0x13e0
[ 33.062288][ T1896] kthread+0x379/0x450
[ 33.062660][ T1896] ? _raw_spin_unlock_irq+0x24/0x30
[ 33.063148][ T1896] ? set_kthread_struct+0x100/0x100
[ 33.063606][ T1896] ret_from_fork+0x1f/0x30
[ 33.064070][ T1896]
[ 33.064313][ T1896]
[ 33.064545][ T1896] addr
ffffc90001d6efc8 is located in stack of task kworker/0:2/1896 at offset 512 in frame:
[ 33.065478][ T1896] brcmf_c_preinit_dcmds+0x0/0xc40
[ 33.065973][ T1896]
[ 33.066191][ T1896] this frame has 4 objects:
[ 33.066614][ T1896] [48, 56) 'ptr'
[ 33.066618][ T1896] [80, 148) 'revinfo'
[ 33.066957][ T1896] [192, 210) 'eventmask'
[ 33.067338][ T1896] [256, 512) 'buf'
[ 33.067742][ T1896]
[ 33.068304][ T1896] Memory state around the buggy address:
[ 33.068838][ T1896]
ffffc90001d6ee80: f2 00 00 02 f2 f2 f2 f2 f2 00 00 00 00 00 00 00
[ 33.069545][ T1896]
ffffc90001d6ef00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 33.070626][ T1896] >
ffffc90001d6ef80: 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 f3 f3
[ 33.072052][ T1896] ^
[ 33.073043][ T1896]
ffffc90001d6f000: f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 33.074230][ T1896]
ffffc90001d6f080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 33.074914][ T1896] ==================================================================
[ 33.075713][ T1896] Disabling lock debugging due to kernel taint
Reviewed-by: Arend van Spriel<arend.vanspriel@broadcom.com>
Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221230075139.56591-1-jisoo.jang@yonsei.ac.kr
Philipp Zabel [Mon, 2 Jan 2023 17:29:34 +0000 (18:29 +0100)]
net: rfkill: gpio: add DT support
Allow probing rfkill-gpio via device tree. This hooks up the already
existing support that was started in commit
262c91ee5e52 ("net:
rfkill: gpio: prepare for DT and ACPI support") via the "rfkill-gpio"
compatible, with the "name" and "type" properties renamed to "label"
and "radio-type", respectively, in the device tree case.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20230102-rfkill-gpio-dt-v2-2-d1b83758c16d@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Philipp Zabel [Mon, 2 Jan 2023 17:29:33 +0000 (18:29 +0100)]
dt-bindings: net: Add rfkill-gpio binding
Add a device tree binding document for GPIO controlled rfkill switches.
The label and radio-type properties correspond to the name and type
properties used for ACPI, respectively. The shutdown-gpios property
is the same as defined for ACPI.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230102-rfkill-gpio-dt-v2-1-d1b83758c16d@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Nick Hainke [Thu, 22 Dec 2022 09:29:57 +0000 (10:29 +0100)]
wifi: mac80211: fix double space in comment
Remove a space in "the frames".
Signed-off-by: Nick Hainke <vincent@systemli.org>
Link: https://lore.kernel.org/r/20221222092957.870790-1-vincent@systemli.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Martin Blumenstingl [Mon, 26 Dec 2022 19:16:09 +0000 (20:16 +0100)]
wifi: mac80211: Drop stations iterator where the iterator function may sleep
This reverts commit
acb99b9b2a08f ("mac80211: Add stations iterator
where the iterator function may sleep"). A different approach was found
for the rtw88 driver where most of the problematic locks were converted
to a driver-local mutex. Drop ieee80211_iterate_stations() because there
are no users of that function.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221226191609.2934234-1-martin.blumenstingl@googlemail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Yang Yingliang [Wed, 7 Dec 2022 15:04:53 +0000 (23:04 +0800)]
wifi: wl3501_cs: don't call kfree_skb() under spin_lock_irqsave()
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave(). Compile
tested only.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207150453.114742-1-yangyingliang@huawei.com
Yang Yingliang [Wed, 7 Dec 2022 15:00:08 +0000 (23:00 +0800)]
wifi: libertas: cmdresp: don't call kfree_skb() under spin_lock_irqsave()
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave(). Compile
tested only.
Fixes:
f52b041aed77 ("libertas: Add spinlock to avoid race condition")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207150008.111743-5-yangyingliang@huawei.com
Yang Yingliang [Wed, 7 Dec 2022 15:00:07 +0000 (23:00 +0800)]
wifi: libertas: main: don't call kfree_skb() under spin_lock_irqsave()
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave(). Compile
tested only.
Fixes:
d2e7b3425c47 ("libertas: disable functionality when interface is down")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207150008.111743-4-yangyingliang@huawei.com
Yang Yingliang [Wed, 7 Dec 2022 15:00:06 +0000 (23:00 +0800)]
wifi: libertas: if_usb: don't call kfree_skb() under spin_lock_irqsave()
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave(). Compile
tested only.
Fixes:
a3128feef6d5 ("libertas: use irqsave() in USB's complete callback")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207150008.111743-3-yangyingliang@huawei.com
Yang Yingliang [Wed, 7 Dec 2022 15:00:05 +0000 (23:00 +0800)]
wifi: libertas_tf: don't call kfree_skb() under spin_lock_irqsave()
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave(). Compile
tested only.
Fixes:
fc75122fabb5 ("libertas_tf: use irqsave() in USB's complete callback")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207150008.111743-2-yangyingliang@huawei.com
Zhengchao Shao [Wed, 7 Dec 2022 01:31:14 +0000 (09:31 +0800)]
wifi: brcmfmac: unmap dma buffer in brcmf_msgbuf_alloc_pktid()
After the DMA buffer is mapped to a physical address, address is stored
in pktids in brcmf_msgbuf_alloc_pktid(). Then, pktids is parsed in
brcmf_msgbuf_get_pktid()/brcmf_msgbuf_release_array() to obtain physaddr
and later unmap the DMA buffer. But when count is always equal to
pktids->array_size, physaddr isn't stored in pktids and the DMA buffer
will not be unmapped anyway.
Fixes:
9a1bb60250d2 ("brcmfmac: Adding msgbuf protocol.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207013114.1748936-1-shaozhengchao@huawei.com
Zhang Changzhong [Thu, 17 Nov 2022 11:33:01 +0000 (19:33 +0800)]
wifi: brcmfmac: fix potential memory leak in brcmf_netdev_start_xmit()
The brcmf_netdev_start_xmit() returns NETDEV_TX_OK without freeing skb
in case of pskb_expand_head() fails, add dev_kfree_skb() to fix it.
Compile tested only.
Fixes:
270a6c1f65fe ("brcmfmac: rework headroom check in .start_xmit()")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1668684782-47422-1-git-send-email-zhangchangzhong@huawei.com
Jisoo Jang [Tue, 15 Nov 2022 04:34:58 +0000 (13:34 +0900)]
wifi: brcmfmac: Fix potential stack-out-of-bounds in brcmf_c_preinit_dcmds()
This patch fixes a stack-out-of-bounds read in brcmfmac that occurs
when 'buf' that is not null-terminated is passed as an argument of
strsep() in brcmf_c_preinit_dcmds(). This buffer is filled with a firmware
version string by memcpy() in brcmf_fil_iovar_data_get().
The patch ensures buf is null-terminated.
Found by a modified version of syzkaller.
[ 47.569679][ T1897] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43236b for chip BCM43236/3
[ 47.582839][ T1897] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 47.601565][ T1897] ==================================================================
[ 47.602574][ T1897] BUG: KASAN: stack-out-of-bounds in strsep+0x1b2/0x1f0
[ 47.603447][ T1897] Read of size 1 at addr
ffffc90001f6f000 by task kworker/0:2/1897
[ 47.604336][ T1897]
[ 47.604621][ T1897] CPU: 0 PID: 1897 Comm: kworker/0:2 Tainted: G O 5.14.0+ #131
[ 47.605617][ T1897] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[ 47.606907][ T1897] Workqueue: usb_hub_wq hub_event
[ 47.607453][ T1897] Call Trace:
[ 47.607801][ T1897] dump_stack_lvl+0x8e/0xd1
[ 47.608295][ T1897] print_address_description.constprop.0.cold+0xf/0x334
[ 47.609009][ T1897] ? strsep+0x1b2/0x1f0
[ 47.609434][ T1897] ? strsep+0x1b2/0x1f0
[ 47.609863][ T1897] kasan_report.cold+0x83/0xdf
[ 47.610366][ T1897] ? strsep+0x1b2/0x1f0
[ 47.610882][ T1897] strsep+0x1b2/0x1f0
[ 47.611300][ T1897] ? brcmf_fil_iovar_data_get+0x3a/0xf0
[ 47.611883][ T1897] brcmf_c_preinit_dcmds+0x995/0xc40
[ 47.612434][ T1897] ? brcmf_c_set_joinpref_default+0x100/0x100
[ 47.613078][ T1897] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 47.613662][ T1897] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 47.614208][ T1897] ? lock_acquire+0x19d/0x4e0
[ 47.614704][ T1897] ? find_held_lock+0x2d/0x110
[ 47.615236][ T1897] ? brcmf_usb_deq+0x1a7/0x260
[ 47.615741][ T1897] ? brcmf_usb_rx_fill_all+0x5a/0xf0
[ 47.616288][ T1897] brcmf_attach+0x246/0xd40
[ 47.616758][ T1897] ? wiphy_new_nm+0x1703/0x1dd0
[ 47.617280][ T1897] ? kmemdup+0x43/0x50
[ 47.617720][ T1897] brcmf_usb_probe+0x12de/0x1690
[ 47.618244][ T1897] ? brcmf_usbdev_qinit.constprop.0+0x470/0x470
[ 47.618901][ T1897] usb_probe_interface+0x2aa/0x760
[ 47.619429][ T1897] ? usb_probe_device+0x250/0x250
[ 47.619950][ T1897] really_probe+0x205/0xb70
[ 47.620435][ T1897] ? driver_allows_async_probing+0x130/0x130
[ 47.621048][ T1897] __driver_probe_device+0x311/0x4b0
[ 47.621595][ T1897] ? driver_allows_async_probing+0x130/0x130
[ 47.622209][ T1897] driver_probe_device+0x4e/0x150
[ 47.622739][ T1897] __device_attach_driver+0x1cc/0x2a0
[ 47.623287][ T1897] bus_for_each_drv+0x156/0x1d0
[ 47.623796][ T1897] ? bus_rescan_devices+0x30/0x30
[ 47.624309][ T1897] ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[ 47.624907][ T1897] ? trace_hardirqs_on+0x46/0x160
[ 47.625437][ T1897] __device_attach+0x23f/0x3a0
[ 47.625924][ T1897] ? device_bind_driver+0xd0/0xd0
[ 47.626433][ T1897] ? kobject_uevent_env+0x287/0x14b0
[ 47.627057][ T1897] bus_probe_device+0x1da/0x290
[ 47.627557][ T1897] device_add+0xb7b/0x1eb0
[ 47.628027][ T1897] ? wait_for_completion+0x290/0x290
[ 47.628593][ T1897] ? __fw_devlink_link_to_suppliers+0x5a0/0x5a0
[ 47.629249][ T1897] usb_set_configuration+0xf59/0x16f0
[ 47.629829][ T1897] usb_generic_driver_probe+0x82/0xa0
[ 47.630385][ T1897] usb_probe_device+0xbb/0x250
[ 47.630927][ T1897] ? usb_suspend+0x590/0x590
[ 47.631397][ T1897] really_probe+0x205/0xb70
[ 47.631855][ T1897] ? driver_allows_async_probing+0x130/0x130
[ 47.632469][ T1897] __driver_probe_device+0x311/0x4b0
[ 47.633002][ T1897] ? usb_generic_driver_match+0x75/0x90
[ 47.633573][ T1897] ? driver_allows_async_probing+0x130/0x130
[ 47.634170][ T1897] driver_probe_device+0x4e/0x150
[ 47.634703][ T1897] __device_attach_driver+0x1cc/0x2a0
[ 47.635248][ T1897] bus_for_each_drv+0x156/0x1d0
[ 47.635748][ T1897] ? bus_rescan_devices+0x30/0x30
[ 47.636271][ T1897] ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[ 47.636881][ T1897] ? trace_hardirqs_on+0x46/0x160
[ 47.637396][ T1897] __device_attach+0x23f/0x3a0
[ 47.637904][ T1897] ? device_bind_driver+0xd0/0xd0
[ 47.638426][ T1897] ? kobject_uevent_env+0x287/0x14b0
[ 47.638985][ T1897] bus_probe_device+0x1da/0x290
[ 47.639512][ T1897] device_add+0xb7b/0x1eb0
[ 47.639977][ T1897] ? __fw_devlink_link_to_suppliers+0x5a0/0x5a0
[ 47.640612][ T1897] ? kfree+0x14a/0x6b0
[ 47.641055][ T1897] ? __usb_get_extra_descriptor+0x116/0x160
[ 47.641679][ T1897] usb_new_device.cold+0x49c/0x1029
[ 47.642245][ T1897] ? hub_disconnect+0x450/0x450
[ 47.642756][ T1897] ? rwlock_bug.part.0+0x90/0x90
[ 47.643273][ T1897] ? _raw_spin_unlock_irq+0x24/0x30
[ 47.643822][ T1897] ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[ 47.644445][ T1897] hub_event+0x1c98/0x3950
[ 47.644939][ T1897] ? hub_port_debounce+0x2e0/0x2e0
[ 47.645467][ T1897] ? check_irq_usage+0x861/0xf20
[ 47.645975][ T1897] ? drain_workqueue+0x280/0x360
[ 47.646506][ T1897] ? lock_release+0x640/0x640
[ 47.646994][ T1897] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 47.647572][ T1897] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 47.648111][ T1897] ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[ 47.648735][ T1897] process_one_work+0x92b/0x1460
[ 47.649262][ T1897] ? pwq_dec_nr_in_flight+0x330/0x330
[ 47.649816][ T1897] ? rwlock_bug.part.0+0x90/0x90
[ 47.650336][ T1897] worker_thread+0x95/0xe00
[ 47.650830][ T1897] ? __kthread_parkme+0x115/0x1e0
[ 47.651361][ T1897] ? process_one_work+0x1460/0x1460
[ 47.651904][ T1897] kthread+0x3a1/0x480
[ 47.652329][ T1897] ? set_kthread_struct+0x120/0x120
[ 47.652878][ T1897] ret_from_fork+0x1f/0x30
[ 47.653370][ T1897]
[ 47.653608][ T1897]
[ 47.653848][ T1897] addr
ffffc90001f6f000 is located in stack of task kworker/0:2/1897 at offset 512 in frame:
[ 47.654891][ T1897] brcmf_c_preinit_dcmds+0x0/0xc40
[ 47.655442][ T1897]
[ 47.655690][ T1897] this frame has 4 objects:
[ 47.656151][ T1897] [48, 56) 'ptr'
[ 47.656159][ T1897] [80, 148) 'revinfo'
[ 47.656534][ T1897] [192, 210) 'eventmask'
[ 47.656953][ T1897] [256, 512) 'buf'
[ 47.657410][ T1897]
[ 47.658035][ T1897] Memory state around the buggy address:
[ 47.658743][ T1897]
ffffc90001f6ef00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 47.659577][ T1897]
ffffc90001f6ef80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 47.660394][ T1897] >
ffffc90001f6f000: f3 f3 f3 f3 f3 f3 f3 f3 00 00 00 00 00 00 00 00
[ 47.661199][ T1897] ^
[ 47.661625][ T1897]
ffffc90001f6f080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 47.662455][ T1897]
ffffc90001f6f100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1
[ 47.663318][ T1897] ==================================================================
[ 47.664147][ T1897] Disabling lock debugging due to kernel taint
Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221115043458.37562-1-jisoo.jang@yonsei.ac.kr
Wang Yufen [Thu, 24 Nov 2022 11:38:22 +0000 (19:38 +0800)]
wifi: wilc1000: add missing unregister_netdev() in wilc_netdev_ifc_init()
Fault injection test reports this issue:
kernel BUG at net/core/dev.c:10731!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
Call Trace:
<TASK>
wilc_netdev_ifc_init+0x19f/0x220 [wilc1000
884bf126e9e98af6a708f266a8dffd53f99e4bf5]
wilc_cfg80211_init+0x30c/0x380 [wilc1000
884bf126e9e98af6a708f266a8dffd53f99e4bf5]
wilc_bus_probe+0xad/0x2b0 [wilc1000_spi
1520a7539b6589cc6cde2ae826a523a33f8bacff]
spi_probe+0xe4/0x140
really_probe+0x17e/0x3f0
__driver_probe_device+0xe3/0x170
driver_probe_device+0x49/0x120
The root case here is alloc_ordered_workqueue() fails, but
cfg80211_unregister_netdevice() or unregister_netdev() not be called in
error handling path. To fix add unregister_netdev goto lable to add the
unregister operation in error handling path.
Fixes:
09ed8bfc5215 ("wilc1000: Rename workqueue from "WILC_wq" to "NETDEV-wq"")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1669289902-23639-1-git-send-email-wangyufen@huawei.com
Zhang Changzhong [Thu, 17 Nov 2022 11:36:03 +0000 (19:36 +0800)]
wifi: wilc1000: fix potential memory leak in wilc_mac_xmit()
The wilc_mac_xmit() returns NETDEV_TX_OK without freeing skb, add
dev_kfree_skb() to fix it. Compile tested only.
Fixes:
c5c77ba18ea6 ("staging: wilc1000: Add SDIO/SPI 802.11 driver")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1668684964-48622-1-git-send-email-zhangchangzhong@huawei.com
Zhengchao Shao [Fri, 9 Dec 2022 01:24:22 +0000 (09:24 +0800)]
wifi: ipw2200: fix memory leak in ipw_wdev_init()
In the error path of ipw_wdev_init(), exception value is returned, and
the memory applied for in the function is not released. Also the memory
is not released in ipw_pci_probe(). As a result, memory leakage occurs.
So memory release needs to be added to the error path of ipw_wdev_init().
Fixes:
a3caa99e6c68 ("libipw: initiate cfg80211 API conversion (v2)")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221209012422.182669-1-shaozhengchao@huawei.com
Yang Yingliang [Thu, 8 Dec 2022 14:38:26 +0000 (22:38 +0800)]
wifi: ipw2x00: don't call dev_kfree_skb() under spin_lock_irqsave()
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In this case, dev_kfree_skb() is called to free and drop the SKB when
it's reset, so replace it with dev_kfree_skb_irq(). Compile tested
only.
Fixes:
43f66a6ce8da ("Add ipw2200 wireless driver.")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221208143826.2385218-1-yangyingliang@huawei.com
Jun ASAKA [Sat, 17 Dec 2022 03:06:59 +0000 (11:06 +0800)]
wifi: rtl8xxxu: fixing transmisison failure for rtl8192eu
Fixing transmission failure which results in
"authentication with ... timed out". This can be
fixed by disable the REG_TXPAUSE.
Signed-off-by: Jun ASAKA <JunASAKA@zzy040330.moe>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221217030659.12577-1-JunASAKA@zzy040330.moe
Bitterblue Smith [Sat, 17 Dec 2022 14:21:59 +0000 (16:21 +0200)]
wifi: rtl8xxxu: Add rate control code for RTL8188EU
Copied from the newer vendor driver, v5.2.2.4.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/5acc1e5d-62d6-3a6a-0f9e-cbc8b809b1d7@gmail.com
Jes Sorensen [Sat, 17 Dec 2022 14:18:23 +0000 (16:18 +0200)]
wifi: rtl8xxxu: Support new chip RTL8188EU
This chip is found in cheap USB devices from TP-Link, D-Link, etc.
Features: 2.4 GHz, b/g/n mode, 1T1R, 150 Mbps.
Chip versions older than "I cut" need software rate control. That will
be in the next commit. Until then MCS7 is used for all data frames.
The "I cut" chips are not supported. They require different firmware
and initialisation tables. Support can be added if someone has the
hardware to test it.
Co-developed-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Co-developed-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Co-developed-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/3aad60f6-23f9-81e8-c741-4bd51e99f423@gmail.com
Bitterblue Smith [Sat, 17 Dec 2022 14:15:23 +0000 (16:15 +0200)]
wifi: rtl8xxxu: Define masks for cck_agc_rpt bits
Define the constants CCK_AGC_RPT_LNA_IDX_MASK and
CCK_AGC_RPT_VGA_IDX_MASK instead of using the same literals
in four places.
And get the bits from cck_agc_rpt using u8_get_bits().
It's a cosmetic change only.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/cfe79922-efdf-2ed0-7404-263915d19d82@gmail.com
Bitterblue Smith [Sat, 17 Dec 2022 14:13:47 +0000 (16:13 +0200)]
wifi: rtl8xxxu: Make rtl8xxxu_load_firmware take const char*
And pass const char* to it.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/361ceac1-cc73-605b-4b63-736bfce80833@gmail.com
Bitterblue Smith [Sat, 17 Dec 2022 14:12:23 +0000 (16:12 +0200)]
wifi: rtl8xxxu: Deduplicate the efuse dumping code
Every chip family except RTL8723AU has a copy of the efuse dumping
code. Remove this and dump the efuse from a single place using a new
function rtl8xxxu_dump_efuse().
Also, use print_hex_dump() to print the efuse instead of a loop and
dev_info(). It shows the ASCII interpretation of the bytes, which is
nice.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/2aa5200a-ee42-e064-16a1-672bed5708c6@gmail.com
Chih-Kang Chang [Fri, 16 Dec 2022 05:29:39 +0000 (13:29 +0800)]
wifi: rtw89: 8852c: rfk: refine AGC tuning flow of DPK for irregular PA
Some hardware modules don't have good RF characteristic as regular.
It could have RF PA characteristic that current code doesn't handle
properly, and it runs into wrong DPK flow that doesn't complete DPK
resulting in bad EVM.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221216052939.9991-1-pkshih@realtek.com
Po-Hao Huang [Wed, 14 Dec 2022 09:19:52 +0000 (17:19 +0800)]
wifi: rtw89: refine 6 GHz scanning dwell time
Reduce dwell time to improve scan duration in 6 GHz. This is required
for scan requests that does not include RNR parsing and does full
channel scan.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221214091952.42792-1-pkshih@realtek.com
Eric Huang [Wed, 14 Dec 2022 09:18:03 +0000 (17:18 +0800)]
wifi: rtw89: 8852b: update BSS color mapping register
BSS color mapping register is different per IC, therefore, move this
register to chip_info and update the setting function. Without this patch,
wrong BSS color causes behavior abnormal, especially DL-OFDMA.
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221214091803.41293-1-pkshih@realtek.com
Ching-Te Ku [Sat, 17 Dec 2022 14:17:45 +0000 (22:17 +0800)]
wifi: rtw89: coex: Change TDMA related logic to version separate
In order to make different version of TDMA and coming update in the future
can all work well, use BTC format version to replace chip_id, because
format could change for specific chip_id.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221217141745.43291-8-pkshih@realtek.com
Ching-Te Ku [Sat, 17 Dec 2022 14:17:44 +0000 (22:17 +0800)]
wifi: rtw89: coex: refactor _chk_btc_report() to extend more features
Change the checking logic to switch case. Make the code more readable.
There are more feature including to common code, in order to commit the
following version of the features, switch case will make the logic more
clearly. This patch did not change logic.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221217141745.43291-7-pkshih@realtek.com
Ching-Te Ku [Sat, 17 Dec 2022 14:17:43 +0000 (22:17 +0800)]
wifi: rtw89: coex: Add v2 BT AFH report and related variable
Wi-Fi firmware update AFH report feature to version 2. If there is BT BLE
device connect to DUT, the mechanism will send H2C to request BT BLE
channel map, it will help to debug.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221217141745.43291-6-pkshih@realtek.com
Ching-Te Ku [Sat, 17 Dec 2022 14:17:42 +0000 (22:17 +0800)]
wifi: rtw89: coex: Update BTC firmware report bitmap definition
The different version use different bit definition to enable firmware
report. WiFi firmware will report information from Bluetooth firmware or
some Wi-Fi firmware mechanism/status to driver by these bits. To solve the
difference, add a function to map bitmap and versions.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221217141745.43291-5-pkshih@realtek.com
Ching-Te Ku [Sat, 17 Dec 2022 14:17:41 +0000 (22:17 +0800)]
wifi: rtw89: coex: Enable Bluetooth report when show debug info
Ask WiFi firmware to send Bluetooth version report when we want to show
Bluetooth debug info. If there is no request for debug log, driver will
not enable the report. This modification can save some C2H/H2C resources.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221217141745.43291-4-pkshih@realtek.com
Ping-Ke Shih [Sat, 17 Dec 2022 14:17:40 +0000 (22:17 +0800)]
wifi: rtw89: coex: use new introduction BTC version format
Previous patch has added format version derived from firmware version.
Use the format version, and remove constant version number from chip_info.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221217141745.43291-3-pkshih@realtek.com
Ping-Ke Shih [Sat, 17 Dec 2022 14:17:39 +0000 (22:17 +0800)]
wifi: rtw89: coex: add BTC format version derived from firmware version
Originally, each chip maintains its own format version followed firmware
it uses. As new chip is added, firmware changes format of exchange
messages to have rich information to handle more conditions.
When old chip is going to upgrade firmware, it could use new format and
driver needs to maintain compatibility with old firmware. So, add this
version array to achieve this goal.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221217141745.43291-2-pkshih@realtek.com
Kalle Valo [Wed, 21 Dec 2022 18:21:36 +0000 (20:21 +0200)]
Merge tag 'mt76-for-kvalo-2022-12-09' of https://github.com/nbd168/wireless
mt76 patches for 6.2
- fixes
- per-PHY LED support
Li Zetao [Mon, 12 Dec 2022 02:58:12 +0000 (10:58 +0800)]
wifi: rtlwifi: Fix global-out-of-bounds bug in _rtl8812ae_phy_set_txpower_limit()
There is a global-out-of-bounds reported by KASAN:
BUG: KASAN: global-out-of-bounds in
_rtl8812ae_eq_n_byte.part.0+0x3d/0x84 [rtl8821ae]
Read of size 1 at addr
ffffffffa0773c43 by task NetworkManager/411
CPU: 6 PID: 411 Comm: NetworkManager Tainted: G D
6.1.0-rc8+ #144
e15588508517267d37
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009),
Call Trace:
<TASK>
...
kasan_report+0xbb/0x1c0
_rtl8812ae_eq_n_byte.part.0+0x3d/0x84 [rtl8821ae]
rtl8821ae_phy_bb_config.cold+0x346/0x641 [rtl8821ae]
rtl8821ae_hw_init+0x1f5e/0x79b0 [rtl8821ae]
...
</TASK>
The root cause of the problem is that the comparison order of
"prate_section" in _rtl8812ae_phy_set_txpower_limit() is wrong. The
_rtl8812ae_eq_n_byte() is used to compare the first n bytes of the two
strings from tail to head, which causes the problem. In the
_rtl8812ae_phy_set_txpower_limit(), it was originally intended to meet
this requirement by carefully designing the comparison order.
For example, "pregulation" and "pbandwidth" are compared in order of
length from small to large, first is 3 and last is 4. However, the
comparison order of "prate_section" dose not obey such order requirement,
therefore when "prate_section" is "HT", when comparing from tail to head,
it will lead to access out of bounds in _rtl8812ae_eq_n_byte(). As
mentioned above, the _rtl8812ae_eq_n_byte() has the same function as
strcmp(), so just strcmp() is enough.
Fix it by removing _rtl8812ae_eq_n_byte() and use strcmp() barely.
Although it can be fixed by adjusting the comparison order of
"prate_section", this may cause the value of "rate_section" to not be
from 0 to 5. In addition, commit "
21e4b0726dc6" not only moved driver
from staging to regular tree, but also added setting txpower limit
function during the driver config phase, so the problem was introduced
by this commit.
Fixes:
21e4b0726dc6 ("rtlwifi: rtl8821ae: Move driver from staging to regular tree")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221212025812.1541311-1-lizetao1@huawei.com
Ping-Ke Shih [Fri, 9 Dec 2022 02:09:40 +0000 (10:09 +0800)]
wifi: rtw89: 8852c: rfk: recover RX DCK failure
RX DCK stands for RX DC calibration that affects CCA, so abnormal
calibration values resulted from calibration failure can cause TX get
stuck.
To solve this, redo calibration if result is bad (over thresholds). When
retry count is over, do recovery that sets high gain fields of RX DCK
results from low gain fields.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221209020940.9573-4-pkshih@realtek.com
Ping-Ke Shih [Fri, 9 Dec 2022 02:09:39 +0000 (10:09 +0800)]
wifi: rtw89: 8852c: rfk: correct DPK settings
Some DPK settings are wrong, and causes bad TX performance occasionally.
So, fix them by internal suggestions.
Fixes:
da4cea16cb13 ("rtw89: 8852c: rfk: add DPK")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221209020940.9573-3-pkshih@realtek.com
Ping-Ke Shih [Fri, 9 Dec 2022 02:09:38 +0000 (10:09 +0800)]
wifi: rtw89: 8852c: rfk: correct DACK setting
After filling calibration parameters, set BIT(0) to enable the hardware
circuit, but original set incorrect bit that affects a little TX
performance.
Fixes:
76599a8d0b7d ("rtw89: 8852c: rfk: add DACK")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221209020940.9573-2-pkshih@realtek.com
Ping-Ke Shih [Fri, 9 Dec 2022 01:22:15 +0000 (09:22 +0800)]
wifi: rtw89: fw: adapt to new firmware format of security section
Normally, system image should ensure firmware integrity, but we provide
an advance feature to ensure this by security section along with firmware.
To enable this feature, custom ID is programmed into efuse, and driver
will download proper security section to firmware.
Since I don't have this kind hardware modules on hand yet, but new format
is used by newer firmware. Therefore, I prepare this patch in advance to
consider size of security section as a factor of checking rule of firmware
size, but don't actually download security section to firmware.
This patch is backward compatible, so it will be safe to have this change
before adding an new format firmware to linux-firmware repository.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221209012215.7342-1-pkshih@realtek.com
Ping-Ke Shih [Fri, 9 Dec 2022 01:21:10 +0000 (09:21 +0800)]
wifi: rtw89: consider ER SU as a TX capability
ER (Extended Range) SU is to have a larger coverage. We set this as a RA
capability, and then firmware can choose ER SU to transmit packets to
reception at cell edge. For 8852C, it needs to fill this capability in
TXWD, so update rtw89_build_txwd_info0_v1().
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221209012110.7242-1-pkshih@realtek.com
Yang Yingliang [Thu, 8 Dec 2022 14:35:17 +0000 (22:35 +0800)]
wifi: rtl8xxxu: don't call dev_kfree_skb() under spin_lock_irqsave()
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In this case, dev_kfree_skb() is called to free and drop the SKB when
it's shutdown, so replace it with dev_kfree_skb_irq(). Compile tested
only.
Fixes:
26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221208143517.2383424-1-yangyingliang@huawei.com
Bitterblue Smith [Thu, 8 Dec 2022 19:34:02 +0000 (21:34 +0200)]
wifi: rtl8xxxu: Fix assignment to bit field priv->cck_agc_report_type
Just because priv->cck_agc_report_type is only one bit doesn't mean
it works like a bool. The value assigned to it loses all bits except
bit 0, so only assign 0 or 1 to it.
This affects the RTL8192EU, but rtl8xxxu already can't connect to any
networks with this chip, so it probably didn't bother anyone.
Fixes:
2ad2a813b803 ("wifi: rtl8xxxu: Fix the CCK RSSI calculation")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/7bb4858c-5cef-9cae-5e08-7e8444e8ba89@gmail.com
Bitterblue Smith [Thu, 8 Dec 2022 19:32:18 +0000 (21:32 +0200)]
wifi: rtl8xxxu: Fix assignment to bit field priv->pi_enabled
Just because priv->pi_enabled is only one bit doesn't mean it works
like a bool. The value assigned to it loses all bits except bit 0,
so only assign 0 or 1 to it.
This affects the RTL8188FU, but fixing the assignment didn't make
a difference for my device.
Fixes:
c888183b21f3 ("wifi: rtl8xxxu: Support new chip RTL8188FU")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/4368d585-11ec-d3c7-ec12-7f0afdcedfda@gmail.com
Zhengchao Shao [Thu, 8 Dec 2022 12:14:48 +0000 (20:14 +0800)]
wifi: libertas: fix memory leak in lbs_init_adapter()
When kfifo_alloc() failed in lbs_init_adapter(), cmd buffer is not
released. Add free memory to processing error path.
Fixes:
7919b89c8276 ("libertas: convert libertas driver to use an event/cmdresp queue")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221208121448.2845986-1-shaozhengchao@huawei.com
Yang Yingliang [Wed, 7 Dec 2022 14:40:13 +0000 (22:40 +0800)]
wifi: iwlegacy: common: don't call dev_kfree_skb() under spin_lock_irqsave()
It is not allowed to call consume_skb() from hardware interrupt context
or with interrupts being disabled. So replace dev_kfree_skb() with
dev_consume_skb_irq() under spin_lock_irqsave(). Compile tested only.
Fixes:
4bc85c1324aa ("Revert "iwlwifi: split the drivers for agn and legacy devices 3945/4965"")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207144013.70210-1-yangyingliang@huawei.com
Yang Yingliang [Wed, 7 Dec 2022 14:14:11 +0000 (22:14 +0800)]
wifi: rtlwifi: rtl8723be: don't call kfree_skb() under spin_lock_irqsave()
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. All the SKBs have
been dequeued from the old queue, so it's safe to enqueue these
SKBs to a free queue, then free them after spin_unlock_irqrestore()
at once. Compile tested only.
Fixes:
5c99f04fec93 ("rtlwifi: rtl8723be: Update driver to match Realtek release of 06/28/14")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207141411.46098-4-yangyingliang@huawei.com
Yang Yingliang [Wed, 7 Dec 2022 14:14:10 +0000 (22:14 +0800)]
wifi: rtlwifi: rtl8188ee: don't call kfree_skb() under spin_lock_irqsave()
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. All the SKBs have
been dequeued from the old queue, so it's safe to enqueue these
SKBs to a free queue, then free them after spin_unlock_irqrestore()
at once. Compile tested only.
Fixes:
7fe3b3abb5da ("rtlwifi: rtl8188ee: rtl8821ae: Fix a queue locking problem")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207141411.46098-3-yangyingliang@huawei.com
Yang Yingliang [Wed, 7 Dec 2022 14:14:09 +0000 (22:14 +0800)]
wifi: rtlwifi: rtl8821ae: don't call kfree_skb() under spin_lock_irqsave()
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. All the SKBs have
been dequeued from the old queue, so it's safe to enqueue these
SKBs to a free queue, then free them after spin_unlock_irqrestore()
at once. Compile tested only.
Fixes:
5c99f04fec93 ("rtlwifi: rtl8723be: Update driver to match Realtek release of 06/28/14")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207141411.46098-2-yangyingliang@huawei.com
Yuan Can [Mon, 5 Dec 2022 06:14:41 +0000 (06:14 +0000)]
wifi: rsi: Fix memory leak in rsi_coex_attach()
The coex_cb needs to be freed when rsi_create_kthread() failed in
rsi_coex_attach().
Fixes:
2108df3c4b18 ("rsi: add coex support")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221205061441.114632-1-yuancan@huawei.com
Christophe JAILLET [Mon, 12 Dec 2022 19:37:16 +0000 (20:37 +0100)]
net: lan966x: Remove a useless test in lan966x_ptp_add_trap()
vcap_alloc_rule() can't return NULL.
So remove some dead-code
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/27992ffcee47fc865ce87274d6dfcffe7a1e69e0.1670873784.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 12 Dec 2022 23:55:08 +0000 (15:55 -0800)]
Merge branch 'net-ipa-enable-ipa-v4-7-support'
Alex Elder says:
====================
net: ipa: enable IPA v4.7 support
The first patch in this series adds "qcom,sm6350-ipa" as a possible
IPA compatible string, for the Qualcomm SM6350 SoC. That SoC uses
IPA v4.7
The second patch in this series adds code that enables support for
IPA v4.7. DTS updates that make use of these will be merged later.
====================
Link: https://lore.kernel.org/r/20221208211529.757669-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Thu, 8 Dec 2022 21:15:29 +0000 (15:15 -0600)]
net: ipa: add IPA v4.7 support
Add the necessary register and data definitions needed for IPA v4.7,
which is found on the SM6350 SoC.
Co-developed-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Luca Weiss [Thu, 8 Dec 2022 21:15:28 +0000 (15:15 -0600)]
dt-bindings: net: qcom,ipa: Add SM6350 compatible
Add support for SM6350, which uses IPA v4.7.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Coco Li [Sat, 10 Dec 2022 04:16:46 +0000 (04:16 +0000)]
bnxt: Use generic HBH removal helper in tx path
Eric Dumazet implemented Big TCP that allowed bigger TSO/GRO packet sizes
for IPv6 traffic. See patch series:
'commit
89527be8d8d6 ("net: add IFLA_TSO_{MAX_SIZE|SEGS} attributes")'
This reduces the number of packets traversing the networking stack and
should usually improves performance. However, it also inserts a
temporary Hop-by-hop IPv6 extension header.
Using the HBH header removal method in the previous patch, the extra header
be removed in bnxt drivers to allow it to send big TCP packets (bigger
TSO packets) as well.
Tested:
Compiled locally
To further test functional correctness, update the GSO/GRO limit on the
physical NIC:
ip link set eth0 gso_max_size 181000
ip link set eth0 gro_max_size 181000
Note that if there are bonding or ipvan devices on top of the physical
NIC, their GSO sizes need to be updated as well.
Then, IPv6/TCP packets with sizes larger than 64k can be observed.
Signed-off-by: Coco Li <lixiaoyan@google.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Tested-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20221210041646.3587757-2-lixiaoyan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Coco Li [Sat, 10 Dec 2022 04:16:45 +0000 (04:16 +0000)]
IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver
IPv6/TCP and GRO stacks can build big TCP packets with an added
temporary Hop By Hop header.
Is GSO is not involved, then the temporary header needs to be removed in
the driver. This patch provides a generic helper for drivers that need
to modify their headers in place.
Tested:
Compiled and ran with ethtool -K eth1 tso off
Could send Big TCP packets
Signed-off-by: Coco Li <lixiaoyan@google.com>
Link: https://lore.kernel.org/r/20221210041646.3587757-1-lixiaoyan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 12 Dec 2022 23:33:39 +0000 (15:33 -0800)]
Merge branch 'bridge-mcast-extensions-for-evpn'
Ido Schimmel says:
====================
bridge: mcast: Extensions for EVPN
tl;dr
=====
This patchset creates feature parity between user space and the kernel
and allows the former to install and replace MDB port group entries with
a source list and associated filter mode. This is required for EVPN use
cases where multicast state is not derived from snooped IGMP/MLD
packets, but instead derived from EVPN routes exchanged by the control
plane in user space.
Background
==========
IGMPv3 [1] and MLDv2 [2] differ from earlier versions of the protocols
in that they add support for source-specific multicast. That is, hosts
can advertise interest in listening to a particular multicast address
only from specific source addresses or from all sources except for
specific source addresses.
In kernel 5.10 [3][4], the bridge driver gained the ability to snoop
IGMPv3/MLDv2 packets and install corresponding MDB port group entries.
For example, a snooped IGMPv3 Membership Report that contains a single
MODE_IS_EXCLUDE record for group 239.10.10.10 with sources 192.0.2.1,
192.0.2.2, 192.0.2.20 and 192.0.2.21 would trigger the creation of these
entries:
# bridge -d mdb show
dev br0 port veth1 grp 239.10.10.10 src 192.0.2.21 temp filter_mode include proto kernel blocked
dev br0 port veth1 grp 239.10.10.10 src 192.0.2.20 temp filter_mode include proto kernel blocked
dev br0 port veth1 grp 239.10.10.10 src 192.0.2.2 temp filter_mode include proto kernel blocked
dev br0 port veth1 grp 239.10.10.10 src 192.0.2.1 temp filter_mode include proto kernel blocked
dev br0 port veth1 grp 239.10.10.10 temp filter_mode exclude source_list 192.0.2.21/0.00,192.0.2.20/0.00,192.0.2.2/0.00,192.0.2.1/0.00 proto kernel
While the kernel can install and replace entries with a filter mode and
source list, user space cannot. It can only add EXCLUDE entries with an
empty source list, which is sufficient for IGMPv2/MLDv1, but not for
IGMPv3/MLDv2.
Use cases where the multicast state is not derived from snooped packets,
but instead derived from routes exchanged by the user space control
plane require feature parity between user space and the kernel in terms
of MDB configuration. Such a use case is detailed in the next section.
Motivation
==========
RFC 7432 [5] defines a "MAC/IP Advertisement route" (type 2) [6] that
allows NVE switches in the EVPN network to advertise and learn
reachability information for unicast MAC addresses. Traffic destined to
a unicast MAC address can therefore be selectively forwarded to a single
NVE switch behind which the MAC is located.
The same is not true for IP multicast traffic. Such traffic is simply
flooded as BUM to all NVE switches in the broadcast domain (BD),
regardless if a switch has interested receivers for the multicast stream
or not. This is especially problematic for overlay networks that make
heavy use of multicast.
The issue is addressed by RFC 9251 [7] that defines a "Selective
Multicast Ethernet Tag Route" (type 6) [8] which allows NVE switches in
the EVPN network to advertise multicast streams that they are interested
in. This is done by having each switch suppress IGMP/MLD packets from
being transmitted to the NVE network and instead communicate the
information over BGP to other switches.
As far as the bridge driver is concerned, the above means that the
multicast state (i.e., {multicast address, group timer, filter-mode,
(source records)}) for the VXLAN bridge port is not populated by the
kernel from snooped IGMP/MLD packets (they are suppressed), but instead
by user space. Specifically, by the routing daemon that is exchanging
EVPN routes with other NVE switches.
Changes are obviously also required in the VXLAN driver, but they are
the subject of future patchsets. See the "Future work" section.
Implementation
==============
The user interface is extended to allow user space to specify the filter
mode of the MDB port group entry and its source list. Replace support is
also added so that user space would not need to remove an entry and
re-add it only to edit its source list or filter mode, as that would
result in packet loss. Example usage:
# bridge mdb replace dev br0 port dummy10 grp 239.1.1.1 permanent \
source_list 192.0.2.1,192.0.2.3 filter_mode exclude proto zebra
# bridge -d -s mdb show
dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.3 permanent filter_mode include proto zebra blocked 0.00
dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.1 permanent filter_mode include proto zebra blocked 0.00
dev br0 port dummy10 grp 239.1.1.1 permanent filter_mode exclude source_list 192.0.2.3/0.00,192.0.2.1/0.00 proto zebra 0.00
The netlink interface is extended with a few new attributes in the
RTM_NEWMDB request message:
[ struct nlmsghdr ]
[ struct br_port_msg ]
[ MDBA_SET_ENTRY ]
struct br_mdb_entry
[ MDBA_SET_ENTRY_ATTRS ]
[ MDBE_ATTR_SOURCE ]
struct in_addr / struct in6_addr
[ MDBE_ATTR_SRC_LIST ] // new
[ MDBE_SRC_LIST_ENTRY ]
[ MDBE_SRCATTR_ADDRESS ]
struct in_addr / struct in6_addr
[ ...]
[ MDBE_ATTR_GROUP_MODE ] // new
u8
[ MDBE_ATTR_RTPORT ] // new
u8
No changes are required in RTM_NEWMDB responses and notifications, as
all the information can already be dumped by the kernel today.
Testing
=======
Tested with existing bridge multicast selftests: bridge_igmp.sh,
bridge_mdb_port_down.sh, bridge_mdb.sh, bridge_mld.sh,
bridge_vlan_mcast.sh.
In addition, added many new test cases for existing as well as for new
MDB functionality.
Patchset overview
=================
Patches #1-#8 are non-functional preparations for the core changes in
later patches.
Patches #9-#10 allow user space to install (*, G) entries with a source
list and associated filter mode. Specifically, patch #9 adds the
necessary kernel plumbing and patch #10 exposes the new functionality to
user space via a few new attributes.
Patch #11 allows user space to specify the routing protocol of new MDB
port group entries so that a routing daemon could differentiate between
entries installed by it and those installed by an administrator.
Patch #12 allows user space to replace MDB port group entries. This is
useful, for example, when user space wants to add a new source to a
source list. Instead of deleting a (*, G) entry and re-adding it with an
extended source list (which would result in packet loss), user space can
simply replace the current entry.
Patches #13-#14 add tests for existing MDB functionality as well as for
all new functionality added in this patchset.
Future work
===========
The VXLAN driver will need to be extended with an MDB so that it could
selectively forward IP multicast traffic to NVE switches with interested
receivers instead of simply flooding it to all switches as BUM.
The idea is to reuse the existing MDB interface for the VXLAN driver in
a similar way to how the FDB interface is shared between the bridge and
VXLAN drivers.
From command line perspective, configuration will look as follows:
# bridge mdb add dev br0 port vxlan0 grp 239.1.1.1 permanent \
filter_mode exclude source_list 198.50.100.1,198.50.100.2
# bridge mdb add dev vxlan0 port vxlan0 grp 239.1.1.1 permanent \
filter_mode include source_list 198.50.100.3,198.50.100.4 \
dst 192.0.2.1 dst_port 4789 src_vni 2
# bridge mdb add dev vxlan0 port vxlan0 grp 239.1.1.1 permanent \
filter_mode exclude source_list 198.50.100.1,198.50.100.2 \
dst 192.0.2.2 dst_port 4789 src_vni 2
Where the first command is enabled by this set, but the next two will be
the subject of future work.
From netlink perspective, the existing PF_BRIDGE/RTM_*MDB messages will
be extended to the VXLAN driver. This means that a few new attributes
will be added (e.g., 'MDBE_ATTR_SRC_VNI') and that the handlers for
these messages will need to move to net/core/rtnetlink.c. The rtnetlink
code will call into the appropriate driver based on the ifindex
specified in the ancillary header.
iproute2 patches can be found here [9].
Changelog
=========
Since v1 [10]:
* Patch #12: Remove extack from br_mdb_replace_group_sg().
* Patch #12: Change 'nlflags' to u16 and move it after 'filter_mode' to
pack the structure.
Since RFC [11]:
* Patch #6: New patch.
* Patch #9: Use an array instead of a list to store source entries.
* Patch #10: Use an array instead of list to store source entries.
* Patch #10: Drop br_mdb_config_attrs_fini().
* Patch #11: Reject protocol for host entries.
* Patch #13: New patch.
* Patch #14: New patch.
[1] https://datatracker.ietf.org/doc/html/rfc3376
[2] https://www.rfc-editor.org/rfc/rfc3810
[3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=
6af52ae2ed14a6bc756d5606b29097dfd76740b8
[4] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=
68d4fd30c83b1b208e08c954cd45e6474b148c87
[5] https://datatracker.ietf.org/doc/html/rfc7432
[6] https://datatracker.ietf.org/doc/html/rfc7432#section-7.2
[7] https://datatracker.ietf.org/doc/html/rfc9251
[8] https://datatracker.ietf.org/doc/html/rfc9251#section-9.1
[9] https://github.com/idosch/iproute2/commits/submit/mdb_v1
[10] https://lore.kernel.org/netdev/
20221208152839.1016350-1-idosch@nvidia.com/
[11] https://lore.kernel.org/netdev/
20221018120420.561846-1-idosch@nvidia.com/
====================
Link: https://lore.kernel.org/r/20221210145633.1328511-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Sat, 10 Dec 2022 14:56:33 +0000 (16:56 +0200)]
selftests: forwarding: Add bridge MDB test
Add a selftests that includes the following test cases:
1. Configuration tests. Both valid and invalid configurations are
tested across all entry types (e.g., L2, IPv4).
2. Forwarding tests. Both host and port group entries are tested across
all entry types.
3. Interaction between user installed MDB entries and IGMP / MLD control
packets.
Example output:
INFO: # Host entries configuration tests
TEST: Common host entries configuration tests (IPv4) [ OK ]
TEST: Common host entries configuration tests (IPv6) [ OK ]
TEST: Common host entries configuration tests (L2) [ OK ]
INFO: # Port group entries configuration tests - (*, G)
TEST: Common port group entries configuration tests (IPv4 (*, G)) [ OK ]
TEST: Common port group entries configuration tests (IPv6 (*, G)) [ OK ]
TEST: IPv4 (*, G) port group entries configuration tests [ OK ]
TEST: IPv6 (*, G) port group entries configuration tests [ OK ]
INFO: # Port group entries configuration tests - (S, G)
TEST: Common port group entries configuration tests (IPv4 (S, G)) [ OK ]
TEST: Common port group entries configuration tests (IPv6 (S, G)) [ OK ]
TEST: IPv4 (S, G) port group entries configuration tests [ OK ]
TEST: IPv6 (S, G) port group entries configuration tests [ OK ]
INFO: # Port group entries configuration tests - L2
TEST: Common port group entries configuration tests (L2 (*, G)) [ OK ]
TEST: L2 (*, G) port group entries configuration tests [ OK ]
INFO: # Forwarding tests
TEST: IPv4 host entries forwarding tests [ OK ]
TEST: IPv6 host entries forwarding tests [ OK ]
TEST: L2 host entries forwarding tests [ OK ]
TEST: IPv4 port group "exclude" entries forwarding tests [ OK ]
TEST: IPv6 port group "exclude" entries forwarding tests [ OK ]
TEST: IPv4 port group "include" entries forwarding tests [ OK ]
TEST: IPv6 port group "include" entries forwarding tests [ OK ]
TEST: L2 port entries forwarding tests [ OK ]
INFO: # Control packets tests
TEST: IGMPv3 MODE_IS_INCLUE tests [ OK ]
TEST: MLDv2 MODE_IS_INCLUDE tests [ OK ]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Sat, 10 Dec 2022 14:56:32 +0000 (16:56 +0200)]
selftests: forwarding: Rename bridge_mdb test
The test is only concerned with host MDB entries and not with MDB
entries as a whole. Rename the test to reflect that.
Subsequent patches will add a more general test that will contain the
test cases for host MDB entries and remove the current test.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Sat, 10 Dec 2022 14:56:31 +0000 (16:56 +0200)]
bridge: mcast: Support replacement of MDB port group entries
Now that user space can specify additional attributes of port group
entries such as filter mode and source list, it makes sense to allow
user space to atomically modify these attributes by replacing entries
instead of forcing user space to delete the entries and add them back.
Replace MDB port group entries when the 'NLM_F_REPLACE' flag is
specified in the netlink message header.
When a (*, G) entry is replaced, update the following attributes: Source
list, state, filter mode, protocol and flags. If the entry is temporary
and in EXCLUDE mode, reset the group timer to the group membership
interval. If the entry is temporary and in INCLUDE mode, reset the
source timers of associated sources to the group membership interval.
Examples:
# bridge mdb replace dev br0 port dummy10 grp 239.1.1.1 permanent source_list 192.0.2.1,192.0.2.2 filter_mode include
# bridge -d -s mdb show
dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.2 permanent filter_mode include proto static 0.00
dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.1 permanent filter_mode include proto static 0.00
dev br0 port dummy10 grp 239.1.1.1 permanent filter_mode include source_list 192.0.2.2/0.00,192.0.2.1/0.00 proto static 0.00
# bridge mdb replace dev br0 port dummy10 grp 239.1.1.1 permanent source_list 192.0.2.1,192.0.2.3 filter_mode exclude proto zebra
# bridge -d -s mdb show
dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.3 permanent filter_mode include proto zebra blocked 0.00
dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.1 permanent filter_mode include proto zebra blocked 0.00
dev br0 port dummy10 grp 239.1.1.1 permanent filter_mode exclude source_list 192.0.2.3/0.00,192.0.2.1/0.00 proto zebra 0.00
# bridge mdb replace dev br0 port dummy10 grp 239.1.1.1 temp source_list 192.0.2.4,192.0.2.3 filter_mode include proto bgp
# bridge -d -s mdb show
dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.4 temp filter_mode include proto bgp 0.00
dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.3 temp filter_mode include proto bgp 0.00
dev br0 port dummy10 grp 239.1.1.1 temp filter_mode include source_list 192.0.2.4/259.44,192.0.2.3/259.44 proto bgp 0.00
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Sat, 10 Dec 2022 14:56:30 +0000 (16:56 +0200)]
bridge: mcast: Allow user space to specify MDB entry routing protocol
Add the 'MDBE_ATTR_RTPORT' attribute to allow user space to specify the
routing protocol of the MDB port group entry. Enforce a minimum value of
'RTPROT_STATIC' to prevent user space from using protocol values that
should only be set by the kernel (e.g., 'RTPROT_KERNEL'). Maintain
backward compatibility by defaulting to 'RTPROT_STATIC'.
The protocol is already visible to user space in RTM_NEWMDB responses
and notifications via the 'MDBA_MDB_EATTR_RTPROT' attribute.
The routing protocol allows a routing daemon to distinguish between
entries configured by it and those configured by the administrator. Once
MDB flush is supported, the protocol can be used as a criterion
according to which the flush is performed.
Examples:
# bridge mdb add dev br0 port dummy10 grp 239.1.1.1 permanent proto kernel
Error: integer out of range.
# bridge mdb add dev br0 port dummy10 grp 239.1.1.1 permanent proto static
# bridge mdb add dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.1 permanent proto zebra
# bridge mdb add dev br0 port dummy10 grp 239.1.1.2 permanent source_list 198.51.100.1,198.51.100.2 filter_mode include proto 250
# bridge -d mdb show
dev br0 port dummy10 grp 239.1.1.2 src 198.51.100.2 permanent filter_mode include proto 250
dev br0 port dummy10 grp 239.1.1.2 src 198.51.100.1 permanent filter_mode include proto 250
dev br0 port dummy10 grp 239.1.1.2 permanent filter_mode include source_list 198.51.100.2/0.00,198.51.100.1/0.00 proto 250
dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.1 permanent filter_mode include proto zebra
dev br0 port dummy10 grp 239.1.1.1 permanent filter_mode exclude proto static
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Sat, 10 Dec 2022 14:56:29 +0000 (16:56 +0200)]
bridge: mcast: Allow user space to add (*, G) with a source list and filter mode
Add new netlink attributes to the RTM_NEWMDB request that allow user
space to add (*, G) with a source list and filter mode.
The RTM_NEWMDB message can already dump such entries (created by the
kernel) so there is no need to add dump support. However, the message
contains a different set of attributes depending if it is a request or a
response. The naming and structure of the new attributes try to follow
the existing ones used in the response.
Request:
[ struct nlmsghdr ]
[ struct br_port_msg ]
[ MDBA_SET_ENTRY ]
struct br_mdb_entry
[ MDBA_SET_ENTRY_ATTRS ]
[ MDBE_ATTR_SOURCE ]
struct in_addr / struct in6_addr
[ MDBE_ATTR_SRC_LIST ] // new
[ MDBE_SRC_LIST_ENTRY ]
[ MDBE_SRCATTR_ADDRESS ]
struct in_addr / struct in6_addr
[ ...]
[ MDBE_ATTR_GROUP_MODE ] // new
u8
Response:
[ struct nlmsghdr ]
[ struct br_port_msg ]
[ MDBA_MDB ]
[ MDBA_MDB_ENTRY ]
[ MDBA_MDB_ENTRY_INFO ]
struct br_mdb_entry
[ MDBA_MDB_EATTR_TIMER ]
u32
[ MDBA_MDB_EATTR_SOURCE ]
struct in_addr / struct in6_addr
[ MDBA_MDB_EATTR_RTPROT ]
u8
[ MDBA_MDB_EATTR_SRC_LIST ]
[ MDBA_MDB_SRCLIST_ENTRY ]
[ MDBA_MDB_SRCATTR_ADDRESS ]
struct in_addr / struct in6_addr
[ MDBA_MDB_SRCATTR_TIMER ]
u8
[...]
[ MDBA_MDB_EATTR_GROUP_MODE ]
u8
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Sat, 10 Dec 2022 14:56:28 +0000 (16:56 +0200)]
bridge: mcast: Add support for (*, G) with a source list and filter mode
In preparation for allowing user space to add (*, G) entries with a
source list and associated filter mode, add the necessary plumbing to
handle such requests.
Extend the MDB configuration structure with a currently empty source
array and filter mode that is currently hard coded to EXCLUDE.
Add the source entries and the corresponding (S, G) entries before
making the new (*, G) port group entry visible to the data path.
Handle the creation of each source entry in a similar fashion to how it
is created from the data path in response to received Membership
Reports: Create the source entry, arm the source timer (if needed), add
a corresponding (S, G) forwarding entry and finally mark the source
entry as installed (by user space).
Add the (S, G) entry by populating an MDB configuration structure and
calling br_mdb_add_group_sg() as if a new entry is created by user
space, with the sole difference that the 'src_entry' field is set to
make sure that the group timer of such entries is never armed.
Note that it is not currently possible to add more than 32 source
entries to a port group entry. If this proves to be a problem we can
either increase 'PG_SRC_ENT_LIMIT' or avoid forcing a limit on entries
created by user space.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Sat, 10 Dec 2022 14:56:27 +0000 (16:56 +0200)]
bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source
User space will soon be able to install a (*, G) with a source list,
prompting the creation of a (S, G) entry for each source.
In this case, the group timer of the (S, G) entry should never be set.
Solve this by adding a new field to the MDB configuration structure that
denotes whether the (S, G) corresponds to a source or not.
The field will be set in a subsequent patch where br_mdb_add_group_sg()
is called in order to create a (S, G) entry for each user provided
source.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Sat, 10 Dec 2022 14:56:26 +0000 (16:56 +0200)]
bridge: mcast: Add a flag for user installed source entries
There are a few places where the bridge driver differentiates between
(S, G) entries installed by the kernel (in response to Membership
Reports) and those installed by user space. One of them is when deleting
an (S, G) entry corresponding to a source entry that is being deleted.
While user space cannot currently add a source entry to a (*, G), it can
add an (S, G) entry that later corresponds to a source entry created by
the reception of a Membership Report. If this source entry is later
deleted because its source timer expired or because the (*, G) entry is
being deleted, the bridge driver will not delete the corresponding (S,
G) entry if it was added by user space as permanent.
This is going to be a problem when the ability to install a (*, G) with
a source list is exposed to user space. In this case, when user space
installs the (*, G) as permanent, then all the (S, G) entries
corresponding to its source list will also be installed as permanent.
When user space deletes the (*, G), all the source entries will be
deleted and the expectation is that the corresponding (S, G) entries
will be deleted as well.
Solve this by introducing a new source entry flag denoting that the
entry was installed by user space. When the entry is deleted, delete the
corresponding (S, G) entry even if it was installed by user space as
permanent, as the flag tells us that it was installed in response to the
source entry being created.
The flag will be set in a subsequent patch where source entries are
created in response to user requests.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Sat, 10 Dec 2022 14:56:25 +0000 (16:56 +0200)]
bridge: mcast: Expose __br_multicast_del_group_src()
Expose __br_multicast_del_group_src() which is symmetric to
br_multicast_new_group_src() and does not remove the installed {S, G}
forwarding entry, unlike br_multicast_del_group_src().
The function will be used in the error path when user space was able to
add a new source entry, but failed to install a corresponding forwarding
entry.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Sat, 10 Dec 2022 14:56:24 +0000 (16:56 +0200)]
bridge: mcast: Expose br_multicast_new_group_src()
Currently, new group source entries are only created in response to
received Membership Reports. Subsequent patches are going to allow user
space to install (*, G) entries with a source list.
As a preparatory step, expose br_multicast_new_group_src() so that it
could later be invoked from the MDB code (i.e., br_mdb.c) that handles
RTM_NEWMDB messages.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Sat, 10 Dec 2022 14:56:23 +0000 (16:56 +0200)]
bridge: mcast: Add a centralized error path
Subsequent patches will add memory allocations in br_mdb_config_init()
as the MDB configuration structure will include a linked list of source
entries. This memory will need to be freed regardless if br_mdb_add()
succeeded or failed.
As a preparation for this change, add a centralized error path where the
memory will be freed.
Note that br_mdb_del() already has one error path and therefore does not
require any changes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Sat, 10 Dec 2022 14:56:22 +0000 (16:56 +0200)]
bridge: mcast: Place netlink policy before validation functions
Subsequent patches are going to add additional validation functions and
netlink policies. Some of these functions will need to perform parsing
using nla_parse_nested() and the new policies.
In order to keep all the policies next to each other, move the current
policy to before the validation functions.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Sat, 10 Dec 2022 14:56:21 +0000 (16:56 +0200)]
bridge: mcast: Split (*, G) and (S, G) addition into different functions
When the bridge is using IGMP version 3 or MLD version 2, it handles the
addition of (*, G) and (S, G) entries differently.
When a new (S, G) port group entry is added, all the (*, G) EXCLUDE
ports need to be added to the port group of the new entry. Similarly,
when a new (*, G) EXCLUDE port group entry is added, the port needs to
be added to the port group of all the matching (S, G) entries.
Subsequent patches will create more differences between both entry
types. Namely, filter mode and source list can only be specified for (*,
G) entries.
Given the current and future differences between both entry types,
handle the addition of each entry type in a different function, thereby
avoiding the creation of one complex function.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Sat, 10 Dec 2022 14:56:20 +0000 (16:56 +0200)]
bridge: mcast: Do not derive entry type from its filter mode
Currently, the filter mode (i.e., INCLUDE / EXCLUDE) of MDB entries
cannot be set from user space. Instead, it is set by the kernel
according to the entry type: (*, G) entries are treated as EXCLUDE and
(S, G) entries are treated as INCLUDE. This allows the kernel to derive
the entry type from its filter mode.
Subsequent patches will allow user space to set the filter mode of (*,
G) entries, making the current assumption incorrect.
As a preparation, remove the current assumption and instead determine
the entry type from its key, which is a more direct way.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiapeng Chong [Mon, 12 Dec 2022 05:58:13 +0000 (13:58 +0800)]
qlcnic: Clean up some inconsistent indenting
No functional modification involved.
drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c:714 qlcnic_validate_ring_count() warn: inconsistent indenting.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3419
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221212055813.91154-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / platform / kernel / linux-starfive.git / log