review.tizen.org Git - platform/kernel/linux-amlogic.git/log

powerpc/iommu: Do not call PageTransHuge() on tail pages

commit e889e96e98e8da97bd39e46b7253615eabe14397 upstream.

The CMA pages migration code does not support compound pages at
the moment so it performs few tests before proceeding to actual page
migration.

One of the tests - PageTransHuge() - has VM_BUG_ON_PAGE(PageTail()) as
it is designed to be called on head pages only. Since we also test for
PageCompound(), and it contains PageTail() and PageHead(), we can
simplify the check by leaving just PageCompound() and therefore avoid
possible VM_BUG_ON_PAGE.

Fixes: 2e5bbb5461f1 ("KVM: PPC: Book3S HV: Migrate pinned pages out of CMA")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/pseries: Fix of_node_put() underflow during DLPAR remove

commit 68baf692c435339e6295cb470ea5545cbc28160e upstream.

Historically struct device_node references were tracked using a kref embedded as
a struct field. Commit 75b57ecf9d1d ("of: Make device nodes kobjects so they
show up in sysfs") (Mar 2014) refactored device_nodes to be kobjects such that
the device tree could by more simply exposed to userspace using sysfs.

Commit 0829f6d1f69e ("of: device_node kobject lifecycle fixes") (Mar 2014)
followed up these changes to better control the kobject lifecycle and in
particular the referecne counting via of_node_get(), of_node_put(), and
of_node_init().

A result of this second commit was that it introduced an of_node_put() call when
a dynamic node is detached, in of_node_remove(), that removes the initial kobj
reference created by of_node_init().

Traditionally as the original dynamic device node user the pseries code had
assumed responsibilty for releasing this final reference in its platform
specific DLPAR detach code.

This patch fixes a refcount underflow introduced by commit 0829f6d1f6, and
recently exposed by the upstreaming of the recount API.

Messages like the following are no longer seen in the kernel log with this
patch following DLPAR remove operations of cpus and pci devices.

  rpadlpar_io: slot PHB 72 removed
  refcount_t: underflow; use-after-free.
  ------------[ cut here ]------------
  WARNING: CPU: 5 PID: 3335 at lib/refcount.c:128 refcount_sub_and_test+0xf4/0x110

Fixes: 0829f6d1f69e ("of: device_node kobject lifecycle fixes")
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
[mpe: Make change log commit references more verbose]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/book3s/mce: Move add_taint() later in virtual mode

commit d93b0ac01a9ce276ec39644be47001873d3d183c upstream.

machine_check_early() gets called in real mode. The very first time when
add_taint() is called, it prints a warning which ends up calling opal
call (that uses OPAL_CALL wrapper) for writing it to console. If we get a
very first machine check while we are in opal we are doomed. OPAL_CALL
overwrites the PACASAVEDMSR in r13 and in this case when we are done with
MCE handling the original opal call will use this new MSR on it's way
back to opal_return. This usually leads to unexpected behaviour or the
kernel to panic. Instead move the add_taint() call later in the virtual
mode where it is safe to call.

This is broken with current FW level. We got lucky so far for not getting
very first MCE hit while in OPAL. But easily reproducible on Mambo.

Fixes: 27ea2c420cad ("powerpc: Set the correct kernel taint on machine check errors.")
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/eeh: Avoid use after free in eeh_handle_special_event()

commit daeba2956f32f91f3493788ff6ee02fb1b2f02fa upstream.

eeh_handle_special_event() is called when an EEH event is detected but
can't be narrowed down to a specific PE. This function looks through
every PE to find one in an erroneous state, then calls the regular event
handler eeh_handle_normal_event() once it knows which PE has an error.

However, if eeh_handle_normal_event() found that the PE cannot possibly
be recovered, it will free it, rendering the passed PE stale.
This leads to a use after free in eeh_handle_special_event() as it attempts to
clear the "recovering" state on the PE after eeh_handle_normal_event() returns.

Thus, make sure the PE is valid when attempting to clear state in
eeh_handle_special_event().

Fixes: 8a6b1bc70dbb ("powerpc/eeh: EEH core to handle special event")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/mm: Ensure IRQs are off in switch_mm()

commit 9765ad134a00a01cbcc69c78ff6defbfad209bc5 upstream.

powerpc expects IRQs to already be (soft) disabled when switch_mm() is
called, as made clear in the commit message of 9c1e105238c4 ("powerpc: Allow
perf_counters to access user memory at interrupt time").

Aside from any race conditions that might exist between switch_mm() and an IRQ,
there is also an unconditional hard_irq_disable() in switch_slb(). If that isn't
followed at some point by an IRQ enable then interrupts will remain disabled
until we return to userspace.

It is true that when switch_mm() is called from the scheduler IRQs are off, but
not when it's called by use_mm(). Looking closer we see that last year in commit
f98db6013c55 ("sched/core: Add switch_mm_irqs_off() and use it in the scheduler")
this was made more explicit by the addition of switch_mm_irqs_off() which is now
called by the scheduler, vs switch_mm() which is used by use_mm().

Arguably it is a bug in use_mm() to call switch_mm() in a different context than
it expects, but fixing that will take time.

This was discovered recently when vhost started throwing warnings such as:

  BUG: sleeping function called from invalid context at kernel/mutex.c:578
  in_atomic(): 0, irqs_disabled(): 1, pid: 10768, name: vhost-10760
  no locks held by vhost-10760/10768.
  irq event stamp: 10
  hardirqs last  enabled at (9):  _raw_spin_unlock_irq+0x40/0x80
  hardirqs last disabled at (10): switch_slb+0x2e4/0x490
  softirqs last  enabled at (0):  copy_process+0x5e8/0x1260
  softirqs last disabled at (0):  (null)
  Call Trace:
    show_stack+0x88/0x390 (unreliable)
    dump_stack+0x30/0x44
    __might_sleep+0x1c4/0x2d0
    mutex_lock_nested+0x74/0x5c0
    cgroup_attach_task_all+0x5c/0x180
    vhost_attach_cgroups_work+0x58/0x80 [vhost]
    vhost_worker+0x24c/0x3d0 [vhost]
    kthread+0xec/0x100
    ret_from_kernel_thread+0x5c/0xd4

Prior to commit 04b96e5528ca ("vhost: lockless enqueuing") (Aug 2016) the
vhost_worker() would do a spin_unlock_irq() not long after calling use_mm(),
which had the effect of reenabling IRQs. Since that commit removed the locking
in vhost_worker() the body of the vhost_worker() loop now runs with interrupts
off causing the warnings.

This patch addresses the problem by making the powerpc code mirror the x86 code,
ie. we disable interrupts in switch_mm(), and optimise the scheduler case by
defining switch_mm_irqs_off().

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[mpe: Flesh out/rewrite change log, add stable]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cx231xx-cards: fix NULL-deref at probe

commit 0cd273bb5e4d1828efaaa8dfd11b7928131ed149 upstream.

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.

Fixes: e0d3bafd0258 ("V4L/DVB (10954): Add cx231xx USB driver")

Cc: Sri Deevi <Srinivasa.Deevi@conexant.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cx231xx-audio: fix NULL-deref at probe

commit 65f921647f4c89a2068478c89691f39b309b58f7 upstream.

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.

Fixes: e0d3bafd0258 ("V4L/DVB (10954): Add cx231xx USB driver")

Cc: Sri Deevi <Srinivasa.Deevi@conexant.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cx231xx-audio: fix init error path

commit fff1abc4d54e469140a699612b4db8d6397bfcba upstream.

Make sure to release the snd_card also on a late allocation error.

Fixes: e0d3bafd0258 ("V4L/DVB (10954): Add cx231xx USB driver")

Cc: Sri Deevi <Srinivasa.Deevi@conexant.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dw2102: limit messages to buffer size

commit 950e252cb469f323740d78e4907843acef89eedb upstream.

Otherwise the i2c transfer functions can read or write beyond the end of
stack or heap buffers.

Signed-off-by: Alyssa Milburn <amilburn@zall.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

digitv: limit messages to buffer size

commit 821117dc21083a99dd99174c10848d70ff43de29 upstream.

Return an error rather than memcpy()ing beyond the end of the buffer.
Internal callers use appropriate sizes, but digitv_i2c_xfer may not.

Signed-off-by: Alyssa Milburn <amilburn@zall.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dvb-frontends/cxd2841er: define symbol_rate_min/max in T/C fe-ops

commit 158f0328af86a99d64073851967a02694bff987d upstream.

Fixes "w_scan -f c" complaining with

This dvb driver is *buggy*: the symbol rate limits are undefined - please
report to linuxtv.org)

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Acked-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zr364xx: enforce minimum size when reading header

commit ee0fe833d96793853335844b6d99fb76bd12cbeb upstream.

This code copies actual_length-128 bytes from the header, which will
underflow if the received buffer is too small.

Signed-off-by: Alyssa Milburn <amilburn@zall.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dib0700: fix NULL-deref at probe

commit d5823511c0f8719a39e72ede1bce65411ac653b7 upstream.

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.

Fixes: c4018fa2e4c0 ("[media] dib0700: fix RC support on Hauppauge
Nova-TD")

Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s5p-mfc: Fix unbalanced call to clock management

commit a5cb00eb4223458250b55daf03ac7ea5f424d601 upstream.

Clock should be turned off after calling s5p_mfc_init_hw() from the
watchdog worker, like it is already done in the s5p_mfc_open() which also
calls this function.

Fixes: af93574678108 ("[media] MFC: Add MFC 5.1 V4L2 driver")

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gspca: konica: add missing endpoint sanity check

commit aa58fedb8c7b6cf2f05941d238495f9e2f29655c upstream.

Make sure to check the number of endpoints to avoid accessing memory
beyond the endpoint array should a device lack the expected endpoints.

Note that, as far as I can tell, the gspca framework has already made
sure there is at least one endpoint in the current alternate setting so
there should be no risk for a NULL-pointer dereference here.

Fixes: b517af722860 ("V4L/DVB: gspca_konica: New gspca subdriver for
konica chipset using cams")

Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s5p-mfc: Fix race between interrupt routine and device functions

commit 0c32b8ec02832df167e16ad659cb11dc148f2ddf upstream.

Interrupt routine must wake process waiting for given interrupt AFTER
updating driver's internal structures and contexts. Doing it in-between
is a serious bug. This patch moves all calls to the wake() function to
the end of the interrupt processing block to avoid potential and real
races, especially on multi-core platforms. This also fixes following issue
reported from clock core (clocks were disabled in interrupt after being
unprepared from the other place in the driver, the stack trace however
points to the different place than s5p_mfc driver because of the race):

WARNING: CPU: 1 PID: 18 at drivers/clk/clk.c:544 clk_core_unprepare+0xc8/0x108
Modules linked in:
CPU: 1 PID: 18 Comm: kworker/1:0 Not tainted 4.10.0-next-20170223-00070-g04e18bc99ab9-dirty #2154
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
Workqueue: pm pm_runtime_work
[<c010d8b0>] (unwind_backtrace) from [<c010a534>] (show_stack+0x10/0x14)
[<c010a534>] (show_stack) from [<c033292c>] (dump_stack+0x74/0x94)
[<c033292c>] (dump_stack) from [<c011cef4>] (__warn+0xd4/0x100)
[<c011cef4>] (__warn) from [<c011cf40>] (warn_slowpath_null+0x20/0x28)
[<c011cf40>] (warn_slowpath_null) from [<c0387a84>] (clk_core_unprepare+0xc8/0x108)
[<c0387a84>] (clk_core_unprepare) from [<c0389d84>] (clk_unprepare+0x24/0x2c)
[<c0389d84>] (clk_unprepare) from [<c03d4660>] (exynos_sysmmu_suspend+0x48/0x60)
[<c03d4660>] (exynos_sysmmu_suspend) from [<c042b9b0>] (pm_generic_runtime_suspend+0x2c/0x38)
[<c042b9b0>] (pm_generic_runtime_suspend) from [<c0437580>] (genpd_runtime_suspend+0x94/0x220)
[<c0437580>] (genpd_runtime_suspend) from [<c042e240>] (__rpm_callback+0x134/0x208)
[<c042e240>] (__rpm_callback) from [<c042e334>] (rpm_callback+0x20/0x80)
[<c042e334>] (rpm_callback) from [<c042d3b8>] (rpm_suspend+0xdc/0x458)
[<c042d3b8>] (rpm_suspend) from [<c042ea24>] (pm_runtime_work+0x80/0x90)
[<c042ea24>] (pm_runtime_work) from [<c01322c4>] (process_one_work+0x120/0x318)
[<c01322c4>] (process_one_work) from [<c0132520>] (worker_thread+0x2c/0x4ac)
[<c0132520>] (worker_thread) from [<c0137ab0>] (kthread+0xfc/0x134)
[<c0137ab0>] (kthread) from [<c0107978>] (ret_from_fork+0x14/0x3c)
---[ end trace 1ead49a7bb83f0d8 ]---

Fixes: af93574678108 ("[media] MFC: Add MFC 5.1 V4L2 driver")

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: hid-sensor: Store restore poll and hysteresis on S3

commit 5d9854eaea776441b38a9a45b4e6879524c4f48c upstream.

This change undo the change done by 'commit 3bec24747446
("iio: hid-sensor-trigger: Change get poll value function order to avoid
sensor properties losing after resume from S3")' as this breaks some
USB/i2c sensor hubs.

Instead of relying on HW for restoring poll and hysteresis, driver stores
and restores on resume (S3). In this way user space modified settings are
not lost for any kind of sensor hub behavior.

In this change, whenever user space modifies sampling frequency or
hysteresis driver will get the feature value from the hub and store in the
per device hid_sensor_common data structure. On resume callback from S3,
system will set the feature to sensor hub, if user space ever modified the
feature value.

Fixes: 3bec24747446 ("iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3")
Reported-by: Ritesh Raj Sarraf <rrs@researchut.com>
Tested-by: Ritesh Raj Sarraf <rrs@researchut.com>
Tested-by: Song, Hongyan <hongyan.song@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: proximity: as3935: fix as3935_write

commit 84ca8e364acb26aba3292bc113ca8ed4335380fd upstream.

AS3935_WRITE_DATA macro bit is incorrect and the actual write
sequence is two leading zeros.

Cc: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipx: call ipxitf_put() in ioctl error path

commit ee0d8d8482345ff97a75a7d747efc309f13b0d80 upstream.

We should call ipxitf_put() if the copy_to_user() fails.

Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: hub: fix non-SS hub-descriptor handling

commit bec444cd1c94c48df409a35ad4e5b143c245c3f7 upstream.

Add missing sanity check on the non-SuperSpeed hub-descriptor length in
order to avoid parsing and leaking two bytes of uninitialised slab data
through sysfs removable-attributes (or a compound-device debug
statement).

Note that we only make sure that the DeviceRemovable field is always
present (and specifically ignore the unused PortPwrCtrlMask field) in
order to continue support any hubs with non-compliant descriptors. As a
further safeguard, the descriptor buffer is also cleared.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: hub: fix SS hub-descriptor handling

commit 2c25a2c818023df64463aac3288a9f969491e507 upstream.

A SuperSpeed hub descriptor does not have any variable-length fields so
bail out when reading a short descriptor.

This avoids parsing and leaking two bytes of uninitialised slab data
through sysfs removable-attributes.

Fixes: dbe79bbe9dcb ("USB 3.0 Hub Changes")
Cc: John Youn <John.Youn@synopsys.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: io_ti: fix div-by-zero in set_termios

commit 6aeb75e6adfaed16e58780309613a578fe1ee90b upstream.

Fix a division-by-zero in set_termios when debugging is enabled and a
high-enough speed has been requested so that the divisor value becomes
zero.

Instead of just fixing the offending debug statement, cap the baud rate
at the base as a zero divisor value also appears to crash the firmware.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: mct_u232: fix big-endian baud-rate handling

commit 26cede343656c0bc2c33cdc783771282405c7fb2 upstream.

Drop erroneous cpu_to_le32 when setting the baud rate, something which
corrupted the divisor on big-endian hosts.

Found using sparse:

warning: incorrect type in argument 1 (different base types)
expected unsigned int [unsigned] [usertype] val
got restricted __le32 [usertype] <noident>

Fixes: af2ac1a091bc ("USB: serial mct_usb232: move DMA buffers to heap")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-By: Pete Zaitcev <zaitcev@yahoo.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: qcserial: add more Lenovo EM74xx device IDs

commit 8d7a10dd323993cc40bd37bce8bc570133b0c396 upstream.

In their infinite wisdom, and never ending quest for end user frustration,
Lenovo has decided to use new USB device IDs for the wwan modules in
their 2017 laptops. The actual hardware is still the Sierra Wireless
EM7455 or EM7430, depending on region.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: serial: option: add Telit ME910 support

commit 40dd46048c155b8f0683f468c950a1c107f77a7c upstream.

This patch adds support for Telit ME910 PID 0x1100.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: iowarrior: fix info ioctl on big-endian hosts

commit dd5ca753fa92fb736b1395db892bd29f78e6d408 upstream.

Drop erroneous le16_to_cpu when returning the USB device speed which is
already in host byte order.

Found using sparse:

warning: cast to restricted __le16

Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: musb: Fix trying to suspend while active for OTG configurations

commit 3c50ffef25855a9d9e4b07b02d756a8cdd653069 upstream.

Commit d8e5f0eca1e8 ("usb: musb: Fix hardirq-safe hardirq-unsafe
lock order error") caused a regression where musb keeps trying to
enable host mode with no cable connected. This seems to be caused
by the fact that now phy is enabled earlier, and we are wrongly
trying to force USB host mode on an OTG port. The errors we are
getting are "trying to suspend as a_idle while active".

For ports configured as OTG, we should not need to do anything
to try to force USB host mode on it's OTG port. Trying to force host
mode in this case just seems to completely confuse the musb state
machine.

Let's fix the issue by making musb_host_setup() attempt to force the
mode only if port_mode is configured for host mode.

Fixes: d8e5f0eca1e8 ("usb: musb: Fix hardirq-safe hardirq-unsafe lock order error")
Cc: Johan Hovold <johan@kernel.org>
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: musb: tusb6010_omap: Do not reset the other direction's packet size

commit 6df2b42f7c040d57d9ecb67244e04e905ab87ac6 upstream.

We have one register for each EP to set the maximum packet size for both
TX and RX.
If for example an RX programming would happen before the previous TX
transfer finishes we would reset the TX packet side.

To fix this issue, only modify the TX or RX part of the register.

Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Prevent losing events in event cache

commit d325a1de49d61ee11aca58a529571c91ecea7879 upstream.

The dwc3 driver can overwite its previous events if its top-half IRQ
handler (TH) gets invoked again before processing the events in the
cache. We see this as a hang in the file transfer and the host will
attempt to reset the device. TH gets the event count and deasserts the
interrupt line by writing DWC3_GEVNTSIZ_INTMASK to DWC3_GEVNTSIZ. If
there's a new event coming between reading the event count and interrupt
deassertion, dwc3 will lose previous pending events. More generally, we
will see 0 event count, which should not affect anything.

This shouldn't be possible in the current dwc3 implementation. However,
through testing and reading the PCIe trace, the TH occasionally still
gets invoked one more time after HW interrupt deassertion. (With PCIe
legacy interrupts, TH is called repeatedly as long as the interrupt line
is asserted). We suspect that there is a small detection delay in the
SW.

To avoid this issue, Check DWC3_EVENT_PENDING flag to determine if the
events are processed in the bottom-half IRQ handler. If not, return
IRQ_HANDLED and don't process new event.

Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dvb-usb-dibusb-mc-common: Add MODULE_LICENSE

commit bf05b65a9fe5f6a6dd3e72cab2aacd8b5b96e41d upstream.

dvb-usb-dibusb-mc-common is licensed under GPLv2, and if we don't say
so then it won't even load since it needs a GPL-only symbol.

Fixes: e91455a1495a ("[media] dvb-usb: split out common parts of dibusb")

Reported-by: Dominique Dumont <dod@debian.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ttusb2: limit messages to buffer size

commit a12b8ab8c5ff7ccd7b107a564743507c850a441d upstream.

Otherwise ttusb2_i2c_xfer can read or write beyond the end of static and
heap buffers.

Signed-off-by: Alyssa Milburn <amilburn@zall.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mceusb: fix NULL-deref at probe

commit 03eb2a557ed552e920a0942b774aaf931596eec1 upstream.

Make sure to check for the required out endpoint to avoid dereferencing
a NULL-pointer in mce_request_packet should a malicious device lack such
an endpoint. Note that this path is hit during probe.

Fixes: 66e89522aff7 ("V4L/DVB: IR: add mceusb IR receiver driver")

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbvision: fix NULL-deref at probe

commit eacb975b48272f54532b62f515a3cf7eefa35123 upstream.

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.

Fixes: 2a9f8b5d25be ("V4L/DVB (5206): Usbvision: set alternate interface
modification")

Cc: Thierry MERLE <thierry.merle@free.fr>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: irda: irda-usb: fix firmware name on big-endian hosts

commit 75cf067953d5ee543b3bda90bbfcbee5e1f94ae8 upstream.

Add missing endianness conversion when using the USB device-descriptor
bcdDevice field to construct a firmware file name.

Fixes: 8ef80aef118e ("[IRDA]: irda-usb.c: STIR421x cleanups")
Cc: Nick Fedchik <nfedchik@atlantic-link.com.ua>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci-mem: allocate zeroed Scratchpad Buffer

commit 7480d912d549f414e0ce39331870899e89a5598c upstream.

According to xHCI ch4.20 Scratchpad Buffers, the Scratchpad
Buffer needs to be zeroed.

...
The following operations take place to allocate
Scratchpad Buffers to the xHC:
...
b. Software clears the Scratchpad Buffer to '0'

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: apply PME_STUCK_QUIRK and MISSING_CAS quirk for Denverton

commit a0c16630d35a874e82bdf2088f58ecaca1024315 upstream.

Intel Denverton microserver is Atom based and need the PME and CAS quirks
as well.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci-plat: propagate return value of platform_get_irq()

commit 4b148d5144d64ee135b8924350cb0b3a7fd21150 upstream.

platform_get_irq() returns an error code, but the xhci-plat driver
ignores it and always returns -ENODEV. This is not correct, and
prevents -EPROBE_DEFER from being propagated properly.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: remove GFP_DMA flag from allocation

commit 5db851cf20857c5504b146046e97cb7781f2a743 upstream.

There is no reason to restrict allocations to the first 16MB ISA DMA
addresses.

It is causing problems in a virtualization setup with enabled IOMMU
(x86_64). The result is that USB is not working in the VM.

Signed-off-by: Matthias Lange <matthias.lange@kernkonzept.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libnvdimm: fix clear length of nvdimm_forget_poison()

commit 8d13c0290655b883df9083a2a0af0d782bc38aef upstream.

ND_CMD_CLEAR_ERROR command returns 'clear_err.cleared', the length
of error actually cleared, which may be smaller than its requested
'len'.

Change nvdimm_clear_poison() to call nvdimm_forget_poison() with
'clear_err.cleared' when this value is valid.

Fixes: e046114af5fc ("libnvdimm: clear the internal poison_list when clearing badblocks")
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fscrypt: avoid collisions when presenting long encrypted filenames

commit 6b06cdee81d68a8a829ad8e8d0f31d6836744af9 upstream.

When accessing an encrypted directory without the key, userspace must
operate on filenames derived from the ciphertext names, which contain
arbitrary bytes.  Since we must support filenames as long as NAME_MAX,
we can't always just base64-encode the ciphertext, since that may make
it too long.  Currently, this is solved by presenting long names in an
abbreviated form containing any needed filesystem-specific hashes (e.g.
to identify a directory block), then the last 16 bytes of ciphertext.
This needs to be sufficient to identify the actual name on lookup.

However, there is a bug.  It seems to have been assumed that due to the
use of a CBC (ciphertext block chaining)-based encryption mode, the last
16 bytes (i.e. the AES block size) of ciphertext would depend on the
full plaintext, preventing collisions.  However, we actually use CBC
with ciphertext stealing (CTS), which handles the last two blocks
specially, causing them to appear "flipped".  Thus, it's actually the
second-to-last block which depends on the full plaintext.

This caused long filenames that differ only near the end of their
plaintexts to, when observed without the key, point to the wrong inode
and be undeletable.  For example, with ext4:

    # echo pass | e4crypt add_key -p 16 edir/
    # seq -f "edir/abcdefghijklmnopqrstuvwxyz012345%.0f" 100000 | xargs touch
    # find edir/ -type f | xargs stat -c %i | sort | uniq | wc -l
    100000
    # sync
    # echo 3 > /proc/sys/vm/drop_caches
    # keyctl new_session
    # find edir/ -type f | xargs stat -c %i | sort | uniq | wc -l
    2004
    # rm -rf edir/
    rm: cannot remove 'edir/_A7nNFi3rhkEQlJ6P,hdzluhODKOeWx5V': Structure needs cleaning
    ...

To fix this, when presenting long encrypted filenames, encode the
second-to-last block of ciphertext rather than the last 16 bytes.

Although it would be nice to solve this without depending on a specific
encryption mode, that would mean doing a cryptographic hash like SHA-256
which would be much less efficient.  This way is sufficient for now, and
it's still compatible with encryption modes like HEH which are strong
pseudorandom permutations.  Also, changing the presented names is still
allowed at any time because they are only provided to allow applications
to do things like delete encrypted directories.  They're not designed to
be used to persistently identify files --- which would be hard to do
anyway, given that they're encrypted after all.

For ease of backports, this patch only makes the minimal fix to both
ext4 and f2fs.  It leaves ubifs as-is, since ubifs doesn't compare the
ciphertext block yet.  Follow-on patches will clean things up properly
and make the filesystems use a shared helper function.

Fixes: 5de0b4d0cd15 ("ext4 crypto: simplify and speed up filename encryption")
Reported-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: check entire encrypted bigname when finding a dentry

commit 6332cd32c8290a80e929fc044dc5bdba77396e33 upstream.

If user has no key under an encrypted dir, fscrypt gives digested dentries.
Previously, when looking up a dentry, f2fs only checks its hash value with
first 4 bytes of the digested dentry, which didn't handle hash collisions fully.
This patch enhances to check entire dentry bytes likewise ext4.

Eric reported how to reproduce this issue by:

# seq -f "edir/abcdefghijklmnopqrstuvwxyz012345%.0f" 100000 | xargs touch
# find edir -type f | xargs stat -c %i | sort | uniq | wc -l
100000
# sync
# echo 3 > /proc/sys/vm/drop_caches
# keyctl new_session
# find edir -type f | xargs stat -c %i | sort | uniq | wc -l
99999

Cc: <stable@vger.kernel.org>
Reported-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
(fixed f2fs_dentry_hash() to work even when the hash is 0)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: chaoskey: fix Alea quirk on big-endian hosts

commit 63afd5cc78775018ea2dec4004428dafa5283e93 upstream.

Add missing endianness conversion when applying the Alea timeout quirk.

Found using sparse:

warning: restricted __le16 degrades to integer

Fixes: e4a886e811cd ("hwrng: chaoskey - Fix URB warning due to timeout on Alea")
Cc: Bob Ham <bob.ham@collabora.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ftdi_sio: add Olimex ARM-USB-TINY(H) PIDs

commit 5f63424ab7daac840df2b12dd5bcc5b38d50f779 upstream.

This patch adds support for recognition of ARM-USB-TINY(H) devices which
are almost identical to ARM-USB-OCD(H) but lacking separate barrel jack
and serial console.

By suggestion from Johan Hovold it is possible to replace
ftdi_jtag_quirk with a bit more generic construction. Since all
Olimex-ARM debuggers has exactly two ports, we could safely always use
only second port within the debugger family.

Signed-off-by: Andrey Korolyov <andrey@xdel.ru>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ftdi_sio: fix setting latency for unprivileged users

commit bb246681b3ed0967489a7401ad528c1aaa1a4c2e upstream.

Commit 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY
flag") enables unprivileged users to set the FTDI latency timer,
but there was a logic flaw that skipped sending the corresponding
USB control message to the device.

Specifically, the device latency timer would not be updated until next
open, something which was later also inadvertently broken by commit
c19db4c9e49a ("USB: ftdi_sio: set device latency timeout at port
probe").

A recent commit c6dce2626606 ("USB: serial: ftdi_sio: fix extreme
low-latency setting") disabled the low-latency mode by default so we now
need this fix to allow unprivileged users to again enable it.

Signed-off-by: Anthony Mallet <anthony.mallet@laas.fr>
[johan: amend commit message]
Fixes: 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY flag")
Fixes: c19db4c9e49a ("USB: ftdi_sio: set device latency timeout at port probe").
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pid_ns: Fix race between setns'ed fork() and zap_pid_ns_processes()

commit 3fd37226216620c1a468afa999739d5016fbc349 upstream.

Imagine we have a pid namespace and a task from its parent's pid_ns,
which made setns() to the pid namespace. The task is doing fork(),
while the pid namespace's child reaper is dying. We have the race
between them:

Task from parent pid_ns             Child reaper
copy_process()                      ..
  alloc_pid()                       ..
  ..                                zap_pid_ns_processes()
  ..                                  disable_pid_allocation()
  ..                                  read_lock(&tasklist_lock)
  ..                                  iterate over pids in pid_ns
  ..                                    kill tasks linked to pids
  ..                                  read_unlock(&tasklist_lock)
  write_lock_irq(&tasklist_lock);   ..
  attach_pid(p, PIDTYPE_PID);       ..
  ..                                ..

So, just created task p won't receive SIGKILL signal,
and the pid namespace will be in contradictory state.
Only manual kill will help there, but does the userspace
care about this? I suppose, the most users just inject
a task into a pid namespace and wait a SIGCHLD from it.

The patch fixes the problem. It simply checks for
(pid_ns->nr_hashed & PIDNS_HASH_ADDING) in copy_process().
We do it under the tasklist_lock, and can't skip
PIDNS_HASH_ADDING as noted by Oleg:

"zap_pid_ns_processes() does disable_pid_allocation()
and then takes tasklist_lock to kill the whole namespace.
Given that copy_process() checks PIDNS_HASH_ADDING
under write_lock(tasklist) they can't race;
if copy_process() takes this lock first, the new child will
be killed, otherwise copy_process() can't miss
the change in ->nr_hashed."

If allocation is disabled, we just return -ENOMEM
like it's made for such cases in alloc_pid().

v2: Do not move disable_pid_allocation(), do not
introduce a new variable in copy_process() and simplify
the patch as suggested by Oleg Nesterov.
Account the problem with double irq enabling
found by Eric W. Biederman.

Fixes: c876ad768215 ("pidns: Stop pid allocation when init dies")
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Ingo Molnar <mingo@kernel.org>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Mike Rapoport <rppt@linux.vnet.ibm.com>
CC: Michal Hocko <mhocko@suse.com>
CC: Andy Lutomirski <luto@kernel.org>
CC: "Eric W. Biederman" <ebiederm@xmission.com>
CC: Andrei Vagin <avagin@openvz.org>
CC: Cyrill Gorcunov <gorcunov@openvz.org>
CC: Serge Hallyn <serge@hallyn.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pid_ns: Sleep in TASK_INTERRUPTIBLE in zap_pid_ns_processes

commit b9a985db98961ae1ba0be169f19df1c567e4ffe0 upstream.

The code can potentially sleep for an indefinite amount of time in
zap_pid_ns_processes triggering the hung task timeout, and increasing
the system average. This is undesirable. Sleep with a task state of
TASK_INTERRUPTIBLE instead of TASK_UNINTERRUPTIBLE to remove these
undesirable side effects.

Apparently under heavy load this has been allowing Chrome to trigger
the hung time task timeout error and cause ChromeOS to reboot.

Reported-by: Vovo Yang <vovoy@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 6347e9009104 ("pidns: guarantee that the pidns init will be the last pidns process reaped")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Fix a subcontext memory leak

commit 224d71f910102c966cdcd782c97e096d5e26e4da upstream.

The only context that frees user_exp_rcv data structures is the last
context closed (from a sub-context set).  This leaks the allocations
from the other sub-contexts.  Separate the common frees from the
specific frees and call them at the appropriate time.

Using KEDR to check for memory leaks we get:

Before test:

[leak_check] Possible leaks: 25

After test:

[leak_check] Possible leaks: 31  (6 leaked data structures)

After patch applied (before and after test have the same value)

[leak_check] Possible leaks: 25

Each leak is 192 + 13440 + 6720 = 20352 bytes per sub-context.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Return an error on memory allocation failure

commit 94679061dcdddbafcf24e3bfb526e54dedcc2f2f upstream.

If the eager buffer allocation fails, it is necessary to return
an error code.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IIO: bmp280-core.c: fix error in humidity calculation

commit ed3730c435f1a9f9559ed7762035d22d8a95adfe upstream.

While calculating the compensation of the humidity there are negative values
interpreted as unsigned because of unsigned variables used. These values as
well as the constants need to be casted to signed as indicated by the
documentation of the sensor.

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: dac: ad7303: fix channel description

commit ce420fd4251809b4c3119b3b20c8b13bd8eba150 upstream.

realbits, storagebits and shift should be numbers, not ASCII characters.

Signed-off-by: Pavel Roskin <plroskin@gmail.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ibmvscsis: Do not send aborted task response

commit 25e78531268e9240fc594ce76587601b873d37c9 upstream.

The driver is sending a response to the actual scsi op that was
aborted by an abort task TM, while LIO is sending a response to
the abort task TM.

ibmvscsis_tgt does not send the response to the client until
release_cmd time. The reason for this was because if we did it
at queue_status time, then the client would be free to reuse the
tag for that command, but we're still using the tag until the
command is released at release_cmd time, so we chose to delay
sending the response until then. That then caused this issue, because
release_cmd is always called, even if queue_status is not.

SCSI spec says that the initiator that sends the abort task
TM NEVER gets a response to the aborted op and with the current
code it will send a response. Thus this fix will remove that response
if the CMD_T_ABORTED && !CMD_T_TAS.

Another case with a small timing window is the case where if LIO sends a
TMR_DOES_NOT_EXIST, and the release_cmd callback is called for the TMR Abort
cmd before the release_cmd for the (attemped) aborted cmd, then we need to
ensure that we send the response for the (attempted) abort cmd to the client
before we send the response for the TMR Abort cmd.

Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Michael Cyr <mikecyr@linux.vnet.ibm.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of: fdt: add missing allocation-failure check

commit 49e67dd17649b60b4d54966e18ec9c80198227f0 upstream.

The memory allocator passed to __unflatten_device_tree() (e.g. a wrapped
kzalloc) can fail so add the missing sanity check to avoid dereferencing
a NULL pointer.

Fixes: fe14042358fa ("of/flattree: Refactor unflatten_device_tree and add fdt_unflatten_tree")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of: fix "/cpus" reference leak in of_numa_parse_cpu_nodes()

commit b8475cbee5ab2eac05f9cd5dbcc94c453d3cbf10 upstream.

The call to of_find_node_by_path("/cpus") returns the cpus device_node
with its reference count incremented. There is no matching of_node_put()
call in of_numa_parse_cpu_nodes() which results in a leaked reference
to the "/cpus" node.

This patch adds an of_node_put() to release the reference.

fixes: 298535c00a2c ("of, numa: Add NUMA of binding implementation.")
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Acked-by: David Daney <david.daney@cavium.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of: fix sparse warning in of_pci_range_parser_one

commit eb3100365791b06242b8bb5c3c2854ba41dabfbc upstream.

sparse gives the following warning for 'pci_space':

../drivers/of/address.c:266:26: warning: incorrect type in assignment (different base types)
../drivers/of/address.c:266:26: expected unsigned int [unsigned] [usertype] pci_space
../drivers/of/address.c:266:26: got restricted __be32 const [usertype] <noident>

It appears that pci_space is only ever accessed on powerpc, so the endian
swap is often not needed.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

proc: Fix unbalanced hard link numbers

commit d66bb1607e2d8d384e53f3d93db5c18483c8c4f7 upstream.

proc_create_mount_point() forgot to increase the parent's nlink, and
it resulted in unbalanced hard link numbers, e.g. /proc/fs shows one
less than expected.

Fixes: eb6d38d5427b ("proc: Allow creating permanently empty directories...")
Reported-by: Tristan Ye <tristan.ye@suse.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxl: Route eeh events to all drivers in cxl_pci_error_detected()

commit 4f58f0bf155e87dda31a3088b1e107fa9dd79f0e upstream.

Fix a boundary condition where in some cases an eeh event that results
in card reset isn't passed on to a driver attached to the virtual PCI
device associated with a slice. This will happen in case when a slice
attached device driver returns a value other than
PCI_ERS_RESULT_NEED_RESET from the eeh error_detected() callback. This
would result in an early return from cxl_pci_error_detected() and
other drivers attached to other AFUs on the card wont be notified.

The patch fixes this by making sure that all slice attached
device-drivers are notified and the return values from
error_detected() callback are aggregated in a scheme where request for
'disconnect' trumps all and 'none' trumps 'need_reset'.

Fixes: 9e8df8a21963 ("cxl: EEH support")
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxl: Force context lock during EEH flow

commit ea9a26d117cf0637c71d3e0076f4a124bf5859df upstream.

During an eeh event when the cxl card is fenced and card sysfs attr
perst_reloads_same_image is set following warning message is seen in the
kernel logs:

  Adapter context unlocked with 0 active contexts
  ------------[ cut here ]------------
  WARNING: CPU: 12 PID: 627 at
  ../drivers/misc/cxl/main.c:325 cxl_adapter_context_unlock+0x60/0x80 [cxl]

Even though this warning is harmless, it clutters the kernel log
during an eeh event. This warning is triggered as the EEH callback
cxl_pci_error_detected doesn't obtain a context-lock before forcibly
detaching all active context and when context-lock is released during
call to cxl_configure_adapter from cxl_pci_slot_reset, a warning in
cxl_adapter_context_unlock is triggered.

To fix this warning, we acquire the adapter context-lock via
cxl_adapter_context_lock() in the eeh callback
cxl_pci_error_detected() once all the virtual AFU PHBs are notified
and their contexts detached. The context-lock is released in
cxl_pci_slot_reset() after the adapter is successfully reconfigured
and before the we call the slot_reset callback on slice attached
device-drivers.

Fixes: 70b565bbdb91 ("cxl: Prevent adapter reset if an active context exists")
Reported-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Tested-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ohci-pci: add qemu quirk

commit 21a60f6e65181cad64fd66ccc8080d413721ba27 upstream.

On a loaded virtualization host (dozen guests booting at the same time)
it may happen that the ohci controller emulation doesn't manage to do
timely frame processing, with the result that the io watchdog fires and
considers the controller being dead, even though it's only the emulation
being unusual slow due to the load peak.

So, add a quirk for qemu and don't use the watchdog in case we figure we
are running on emulated ohci. The virtual ohci controller masquerades
as apple ohci controller, but we can identify it by subsystem id.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cdc-acm: fix possible invalid access when processing notification

commit 1bb9914e1730417d530de9ed37e59efdc647146b upstream.

Notifications may only be 8 bytes long. Accessing the 9th and
10th byte of unimplemented/unknown notifications may be insecure.
Also check the length of known notifications before accessing anything
behind the 8th byte.

Signed-off-by: Tobias Herzog <t-herzog@gmx.de>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: omap: return error if requested debounce time is not possible

commit 83977443938122baeed28dc9f078db3da9855f7c upstream.

omap_gpio_debounce() does not validate that the requested debounce
is within a range it can handle. Instead it lets the register value
wrap silently, and always returns success.

This can lead to all sorts of unexpected behavior, such as gpio_keys
asking for a too-long debounce, but getting a very short debounce in
practice.

Fix this by returning -EINVAL if the requested value does not fit into
the register field. If there is no debounce clock available at all,
return -ENOTSUPP.

Fixes: e85ec6c3047b ("gpio: omap: fix omap2_set_gpio_debounce")
Signed-off-by: David Rivshin <drivshin@allworx.com>
Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/tmr: handle races with hw when updating the next alarm time

commit 1b0f84380b10ee97f7d2dd191294de9017e94d1d upstream.

If the time to the next alarm is short enough, we could race with HW and
end up with an ~4 second delay until it triggers.

Fix this by checking again after we update HW.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/tmr: avoid processing completed alarms when adding a new one

commit 330bdf62fe6a6c5b99a647f7bf7157107c9348b3 upstream.

The idea here was to avoid having to "manually" program the HW if there's
a new earliest alarm. This was lazy and bad, as it leads to loads of fun
races between inter-related callers (ie. therm).

Turns out, it's not so difficult after all. Go figure ;)

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/tmr: fix corruption of the pending list when rescheduling an alarm

commit 9fc64667ee48c9a25e7dca1a6bcb6906fec5bcc5 upstream.

At least therm/fantog "attempts" to work around this issue, which could
lead to corruption of the pending alarm list.

Fix it properly by not updating the timestamp without the lock held, or
trying to add an already pending alarm to the pending alarm list....

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/tmr: ack interrupt before processing alarms

commit 3733bd8b407211739e72d051e5f30ad82a52c4bc upstream.

Fixes a race where we can miss an alarm that triggers while we're already
processing previous alarms.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/therm: remove ineffective workarounds for alarm bugs

commit e4311ee51d1e2676001b2d8fcefd92bdd79aad85 upstream.

These were ineffective due to touching the list without the alarm lock,
but should no longer be required.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Add missing lb_vblank_lead_lines setup to DCE-6 path.

commit effaf848b957fbf72a3b6a1ad87f5e031eda0b75 upstream.

This apparently got lost when implementing the new DCE-6 support
and would cause failures in pageflip scheduling and timestamping.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Avoid overflows/divide-by-zero in latency_watermark calculations.

commit e190ed1ea7458e446230de4113cc5d53b8dc4ec8 upstream.

At dot clocks > approx. 250 Mhz, some of these calcs will overflow and
cause miscalculation of latency watermarks, and for some overflows also
divide-by-zero driver crash ("divide error: 0000 [#1] PREEMPT SMP" in
"dce_v10_0_latency_watermark+0x12d/0x190").

This zero-divide happened, e.g., on AMD Tonga Pro under DCE-10,
on a Displayport panel when trying to set a video mode of 2560x1440
at 165 Hz vrefresh with a dot clock of 635.540 Mhz.

Refine calculations to avoid the overflows.

Tested for DCE-10 with R9 380 Tonga + ASUS ROG PG279 panel.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Make display watermark calculations more accurate

commit d63c277dc672e0c568481af043359420fa9d4736 upstream.

Avoid big roundoff errors in scanline/hactive durations for
high pixel clocks, especially for >= 500 Mhz, and thereby
program more accurate display fifo watermarks.

Implemented here for DCE 6,8,10,11.
Successfully tested on DCE 10 with AMD R9 380 Tonga.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k_htc: fix NULL-deref at probe

commit ebeb36670ecac36c179b5fb5d5c88ff03ba191ec upstream.

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.

Fixes: 36bcce430657 ("ath9k_htc: Handle storage devices")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k_htc: Add support of AirTies 1eda:2315 AR9271 device

commit 16ff1fb0e32f76a5d285a6f23b82d21aa52813c6 upstream.

T:  Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#=  7 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs=  1
P:  Vendor=1eda ProdID=2315 Rev=01.08
S:  Manufacturer=ATHEROS
S:  Product=USB2.0 WLAN
S:  SerialNumber=12345
C:  #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 6 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)

Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/cputime: fix incorrect system time

commit 07a63cbe8bcb6ba72fb989dcab1ec55ec6c36c7e upstream.

git commit c5328901aa1db134 "[S390] entry[64].S improvements" removed
the update of the exit_timer lowcore field from the critical section
cleanup of the .Lsysc_restore/.Lsysc_done and .Lio_restore/.Lio_done
blocks. If the PSW is updated by the critical section cleanup to point to
user space again, the interrupt entry code will do a vtime calculation
after the cleanup completed with an exit_timer value which has *not* been
updated. Due to this incorrect system time deltas are calculated.

If an interrupt occured with an old PSW between .Lsysc_restore/.Lsysc_done
or .Lio_restore/.Lio_done update __LC_EXIT_TIMER with the system entry
time of the interrupt.

Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/kdump: Add final note

commit dcc00b79fc3d076832f7240de8870f492629b171 upstream.

Since linux v3.14 with commit 38dfac843cb6d7be1 ("vmcore: prevent PT_NOTE
p_memsz overflow during header update") on s390 we get the following
message in the kdump kernel:

  Warning: Exceeded p_memsz, dropping PT_NOTE entry n_namesz=0x6b6b6b6b,
  n_descsz=0x6b6b6b6b

The reason for this is that we don't create a final zero note in
the ELF header which the proc/vmcore code uses to find out the end
of the notes section (see also kernel/kexec_core.c:final_note()).

It still worked on s390 by chance because we (most of the time?) have the
byte pattern 0x6b6b6b6b after the notes section which also makes the notes
parsing code stop in update_note_header_size_elf64() because 0x6b6b6b6b is
interpreded as note size:

  if ((real_sz + sz) > max_sz) {
          pr_warn("Warning: Exceeded p_memsz, dropping P ...);
          break;
  }

So fix this and add the missing final note to the ELF header.
We don't have to adjust the memory size for ELF header ("alloc_size")
because the new ELF note still fits into the 0x1000 base memory.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: tps65023: Fix inverted core enable logic.

commit c90722b54a4f5e21ac59301ed9a6dbaa439bdb16 upstream.

Commit 43530b69d758328d3ffe6ab98fd640463e8e3667 ("regulator: Use
regmap_read/write(), regmap_update_bits functions directly") intended
to replace working inline helper functions with standard regmap
calls.  However, it also inverted the set/clear logic of the "CORE ADJ
Allowed" bit.  That patch was clearly never tested, since without that
bit cleared, the core VDCDC1 voltage output does not react to I2C
configuration changes.

This patch fixes the issue by clearing the bit as in the original,
correct implementation.  Note for stable back porting that, due to
subsequent driver churn, this patch will not apply on every kernel
version.

Fixes: 43530b69d758 ("regulator: Use regmap_read/write(), regmap_update_bits functions directly")
Signed-off-by: Richard Cochran <rcochran@linutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: rk808: Fix RK818 LDO2

commit 75f88115391156b3f0fecbbae76bf870c89bcab8 upstream.

Set the correct voltage select register for LDO2.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86: fix 32-bit case of __get_user_asm_u64()

commit 33c9e9729033387ef0521324c62e7eba529294af upstream.

The code to fetch a 64-bit value from user space was entirely buggered,
and has been since the code was merged in early 2016 in commit
b2f680380ddf ("x86/mm/32: Add support for 64-bit __get_user() on 32-bit
kernels").

Happily the buggered routine is almost certainly entirely unused, since
the normal way to access user space memory is just with the non-inlined
"get_user()", and the inlined version didn't even historically exist.

The normal "get_user()" case is handled by external hand-written asm in
arch/x86/lib/getuser.S that doesn't have either of these issues.

There were two independent bugs in __get_user_asm_u64():

- it still did the STAC/CLAC user space access marking, even though
   that is now done by the wrapper macros, see commit 11f1a4b9755f
   ("x86: reorganize SMAP handling in user space accesses").

   This didn't result in a semantic error, it just means that the
   inlined optimized version was hugely less efficient than the
   allegedly slower standard version, since the CLAC/STAC overhead is
   quite high on modern Intel CPU's.

- the double register %eax/%edx was marked as an output, but the %eax
   part of it was touched early in the asm, and could thus clobber other
   inputs to the asm that gcc didn't expect it to touch.

   In particular, that meant that the generated code could look like
   this:

        mov    (%eax),%eax
        mov    0x4(%eax),%edx

   where the load of %edx obviously was _supposed_ to be from the 32-bit
   word that followed the source of %eax, but because %eax was
   overwritten by the first instruction, the source of %edx was
   basically random garbage.

The fixes are trivial: remove the extraneous STAC/CLAC entries, and mark
the 64-bit output as early-clobber to let gcc know that no inputs should
alias with the output register.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: X86: Fix read out-of-bounds vulnerability in kvm pio emulation

commit cbfc6c9184ce71b52df4b1d82af5afc81a709178 upstream.

Huawei folks reported a read out-of-bounds vulnerability in kvm pio emulation.

- "inb" instruction to access PIT Mod/Command register (ioport 0x43, write only,
  a read should be ignored) in guest can get a random number.
- "rep insb" instruction to access PIT register port 0x43 can control memcpy()
  in emulator_pio_in_emulated() to copy max 0x400 bytes but only read 1 bytes,
  which will disclose the unimportant kernel memory in host but no crash.

The similar test program below can reproduce the read out-of-bounds vulnerability:

void hexdump(void *mem, unsigned int len)
{
        unsigned int i, j;

        for(i = 0; i < len + ((len % HEXDUMP_COLS) ? (HEXDUMP_COLS - len % HEXDUMP_COLS) : 0); i++)
        {
                /* print offset */
                if(i % HEXDUMP_COLS == 0)
                {
                        printf("0x%06x: ", i);
                }

                /* print hex data */
                if(i < len)
                {
                        printf("%02x ", 0xFF & ((char*)mem)[i]);
                }
                else /* end of block, just aligning for ASCII dump */
                {
                        printf("   ");
                }

                /* print ASCII dump */
                if(i % HEXDUMP_COLS == (HEXDUMP_COLS - 1))
                {
                        for(j = i - (HEXDUMP_COLS - 1); j <= i; j++)
                        {
                                if(j >= len) /* end of block, not really printing */
                                {
                                        putchar(' ');
                                }
                                else if(isprint(((char*)mem)[j])) /* printable char */
                                {
                                        putchar(0xFF & ((char*)mem)[j]);
                                }
                                else /* other char */
                                {
                                        putchar('.');
                                }
                        }
                        putchar('\n');
                }
        }
}

int main(void)
{
int i;
if (iopl(3))
{
err(1, "set iopl unsuccessfully\n");
return -1;
}
static char buf[0x40];

/* test ioport 0x40,0x41,0x42,0x43,0x44,0x45 */

memset(buf, 0xab, sizeof(buf));

asm volatile("push %rdi;");
asm volatile("mov %0, %%rdi;"::"q"(buf));

asm volatile ("mov $0x40, %rdx;");
asm volatile ("in %dx,%al;");
asm volatile ("stosb;");

asm volatile ("mov $0x41, %rdx;");
asm volatile ("in %dx,%al;");
asm volatile ("stosb;");

asm volatile ("mov $0x42, %rdx;");
asm volatile ("in %dx,%al;");
asm volatile ("stosb;");

asm volatile ("mov $0x43, %rdx;");
asm volatile ("in %dx,%al;");
asm volatile ("stosb;");

asm volatile ("mov $0x44, %rdx;");
asm volatile ("in %dx,%al;");
asm volatile ("stosb;");

asm volatile ("mov $0x45, %rdx;");
asm volatile ("in %dx,%al;");
asm volatile ("stosb;");

asm volatile ("pop %rdi;");
hexdump(buf, 0x40);

printf("\n");

/* ins port 0x40 */

memset(buf, 0xab, sizeof(buf));

asm volatile("push %rdi;");
asm volatile("mov %0, %%rdi;"::"q"(buf));

asm volatile ("mov $0x20, %rcx;");
asm volatile ("mov $0x40, %rdx;");
asm volatile ("rep insb;");

asm volatile ("pop %rdi;");
hexdump(buf, 0x40);

printf("\n");

/* ins port 0x43 */

memset(buf, 0xab, sizeof(buf));

asm volatile("push %rdi;");
asm volatile("mov %0, %%rdi;"::"q"(buf));

asm volatile ("mov $0x20, %rcx;");
asm volatile ("mov $0x43, %rdx;");
asm volatile ("rep insb;");

asm volatile ("pop %rdi;");
hexdump(buf, 0x40);

printf("\n");
return 0;
}

The vcpu->arch.pio_data buffer is used by both in/out instrutions emulation
w/o clear after using which results in some random datas are left over in
the buffer. Guest reads port 0x43 will be ignored since it is write only,
however, the function kernel_pio() can't distigush this ignore from successfully
reads data from device's ioport. There is no new data fill the buffer from
port 0x43, however, emulator_pio_in_emulated() will copy the stale data in
the buffer to the guest unconditionally. This patch fixes it by clearing the
buffer before in instruction emulation to avoid to grant guest the stale data
in the buffer.

In addition, string I/O is not supported for in kernel device. So there is no
iteration to read ioport %RCX times for string I/O. The function kernel_pio()
just reads one round, and then copy the io size * %RCX to the guest unconditionally,
actually it copies the one round ioport data w/ other random datas which are left
over in the vcpu->arch.pio_data buffer to the guest. This patch fixes it by
introducing the string I/O support for in kernel device in order to grant the right
ioport datas to the guest.

Before the patch:

0x000000: fe 38 93 93 ff ff ab ab .8......
0x000008: ab ab ab ab ab ab ab ab ........
0x000010: ab ab ab ab ab ab ab ab ........
0x000018: ab ab ab ab ab ab ab ab ........
0x000020: ab ab ab ab ab ab ab ab ........
0x000028: ab ab ab ab ab ab ab ab ........
0x000030: ab ab ab ab ab ab ab ab ........
0x000038: ab ab ab ab ab ab ab ab ........

0x000000: f6 00 00 00 00 00 00 00 ........
0x000008: 00 00 00 00 00 00 00 00 ........
0x000010: 00 00 00 00 4d 51 30 30 ....MQ00
0x000018: 30 30 20 33 20 20 20 20 00 3
0x000020: ab ab ab ab ab ab ab ab ........
0x000028: ab ab ab ab ab ab ab ab ........
0x000030: ab ab ab ab ab ab ab ab ........
0x000038: ab ab ab ab ab ab ab ab ........

0x000000: f6 00 00 00 00 00 00 00 ........
0x000008: 00 00 00 00 00 00 00 00 ........
0x000010: 00 00 00 00 4d 51 30 30 ....MQ00
0x000018: 30 30 20 33 20 20 20 20 00 3
0x000020: ab ab ab ab ab ab ab ab ........
0x000028: ab ab ab ab ab ab ab ab ........
0x000030: ab ab ab ab ab ab ab ab ........
0x000038: ab ab ab ab ab ab ab ab ........

After the patch:

0x000000: 1e 02 f8 00 ff ff ab ab ........
0x000008: ab ab ab ab ab ab ab ab ........
0x000010: ab ab ab ab ab ab ab ab ........
0x000018: ab ab ab ab ab ab ab ab ........
0x000020: ab ab ab ab ab ab ab ab ........
0x000028: ab ab ab ab ab ab ab ab ........
0x000030: ab ab ab ab ab ab ab ab ........
0x000038: ab ab ab ab ab ab ab ab ........

0x000000: d2 e2 d2 df d2 db d2 d7 ........
0x000008: d2 d3 d2 cf d2 cb d2 c7 ........
0x000010: d2 c4 d2 c0 d2 bc d2 b8 ........
0x000018: d2 b4 d2 b0 d2 ac d2 a8 ........
0x000020: ab ab ab ab ab ab ab ab ........
0x000028: ab ab ab ab ab ab ab ab ........
0x000030: ab ab ab ab ab ab ab ab ........
0x000038: ab ab ab ab ab ab ab ab ........

0x000000: 00 00 00 00 00 00 00 00 ........
0x000008: 00 00 00 00 00 00 00 00 ........
0x000010: 00 00 00 00 00 00 00 00 ........
0x000018: 00 00 00 00 00 00 00 00 ........
0x000020: ab ab ab ab ab ab ab ab ........
0x000028: ab ab ab ab ab ab ab ab ........
0x000030: ab ab ab ab ab ab ab ab ........
0x000038: ab ab ab ab ab ab ab ab ........

Reported-by: Moguofang <moguofang@huawei.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Moguofang <moguofang@huawei.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Fix potential preemption when get the current kvmclock timestamp

commit e2c2206a18993bc9f62393d49c7b2066c3845b25 upstream.

BUG: using __this_cpu_read() in preemptible [00000000] code: qemu-system-x86/2809
caller is __this_cpu_preempt_check+0x13/0x20
CPU: 2 PID: 2809 Comm: qemu-system-x86 Not tainted 4.11.0+ #13
Call Trace:
  dump_stack+0x99/0xce
  check_preemption_disabled+0xf5/0x100
  __this_cpu_preempt_check+0x13/0x20
  get_kvmclock_ns+0x6f/0x110 [kvm]
  get_time_ref_counter+0x5d/0x80 [kvm]
  kvm_hv_process_stimers+0x2a1/0x8a0 [kvm]
  ? kvm_hv_process_stimers+0x2a1/0x8a0 [kvm]
  ? kvm_arch_vcpu_ioctl_run+0xac9/0x1ce0 [kvm]
  kvm_arch_vcpu_ioctl_run+0x5bf/0x1ce0 [kvm]
  kvm_vcpu_ioctl+0x384/0x7b0 [kvm]
  ? kvm_vcpu_ioctl+0x384/0x7b0 [kvm]
  ? __fget+0xf3/0x210
  do_vfs_ioctl+0xa4/0x700
  ? __fget+0x114/0x210
  SyS_ioctl+0x79/0x90
  entry_SYSCALL_64_fastpath+0x23/0xc2
RIP: 0033:0x7f9d164ed357
  ? __this_cpu_preempt_check+0x13/0x20

This can be reproduced by run kvm-unit-tests/hyperv_stimer.flat w/
CONFIG_PREEMPT and CONFIG_DEBUG_PREEMPT enabled.

Safe access to per-CPU data requires a couple of constraints, though: the
thread working with the data cannot be preempted and it cannot be migrated
while it manipulates per-CPU variables. If the thread is preempted, the
thread that replaces it could try to work with the same variables; migration
to another CPU could also cause confusion. However there is no preemption
disable when reads host per-CPU tsc rate to calculate the current kvmclock
timestamp.

This patch fixes it by utilizing get_cpu/put_cpu pair to guarantee both
__this_cpu_read() and rdtsc() are not preempted.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Fix load damaged SSEx MXCSR register

commit a575813bfe4bc15aba511a5e91e61d242bff8b9d upstream.

Reported by syzkaller:

   BUG: unable to handle kernel paging request at ffffffffc07f6a2e
   IP: report_bug+0x94/0x120
   PGD 348e12067
   P4D 348e12067
   PUD 348e14067
   PMD 3cbd84067
   PTE 80000003f7e87161

   Oops: 0003 [#1] SMP
   CPU: 2 PID: 7091 Comm: kvm_load_guest_ Tainted: G           OE   4.11.0+ #8
   task: ffff92fdfb525400 task.stack: ffffbda6c3d04000
   RIP: 0010:report_bug+0x94/0x120
   RSP: 0018:ffffbda6c3d07b20 EFLAGS: 00010202
    do_trap+0x156/0x170
    do_error_trap+0xa3/0x170
    ? kvm_load_guest_fpu.part.175+0x12a/0x170 [kvm]
    ? mark_held_locks+0x79/0xa0
    ? retint_kernel+0x10/0x10
    ? trace_hardirqs_off_thunk+0x1a/0x1c
    do_invalid_op+0x20/0x30
    invalid_op+0x1e/0x30
   RIP: 0010:kvm_load_guest_fpu.part.175+0x12a/0x170 [kvm]
    ? kvm_load_guest_fpu.part.175+0x1c/0x170 [kvm]
    kvm_arch_vcpu_ioctl_run+0xed6/0x1b70 [kvm]
    kvm_vcpu_ioctl+0x384/0x780 [kvm]
    ? kvm_vcpu_ioctl+0x384/0x780 [kvm]
    ? sched_clock+0x13/0x20
    ? __do_page_fault+0x2a0/0x550
    do_vfs_ioctl+0xa4/0x700
    ? up_read+0x1f/0x40
    ? __do_page_fault+0x2a0/0x550
    SyS_ioctl+0x79/0x90
    entry_SYSCALL_64_fastpath+0x23/0xc2

SDM mentioned that "The MXCSR has several reserved bits, and attempting to write
a 1 to any of these bits will cause a general-protection exception(#GP) to be
generated". The syzkaller forks' testcase overrides xsave area w/ random values
and steps on the reserved bits of MXCSR register. The damaged MXCSR register
values of guest will be restored to SSEx MXCSR register before vmentry. This
patch fixes it by catching userspace override MXCSR register reserved bits w/
random values and bails out immediately.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ima: accept previously set IMA_NEW_FILE

commit 1ac202e978e18f045006d75bd549612620c6ec3a upstream.

Modifying the attributes of a file makes ima_inode_post_setattr reset
the IMA cache flags. So if the file, which has just been created,
is opened a second time before the first file descriptor is closed,
verification fails since the security.ima xattr has not been written
yet. We therefore have to look at the IMA_NEW_FILE even if the file
already existed.

With this patch there should no longer be an error when cat tries to
open testfile:

$ rm -f testfile
$ ( echo test >&3 ; touch testfile ; cat testfile ) 3>testfile

A file being new is no reason to accept that it is missing a digital
signature demanded by the policy.

Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mwifiex: pcie: fix cmd_buf use-after-free in remove/reset

commit 3c8cb9ad032d737b874e402c59eb51e3c991a144 upstream.

Command buffers (skb's) are allocated by the main driver, and freed upon
the last use. That last use is often in mwifiex_free_cmd_buffer(). In
the meantime, if the command buffer gets used by the PCI driver, we map
it as DMA-able, and store the mapping information in the 'cb' memory.

However, if a command was in-flight when resetting the device (and
therefore was still mapped), we don't get a chance to unmap this memory
until after the core has cleaned up its command handling.

Let's keep a refcount within the PCI driver, so we ensure the memory
only gets freed after we've finished unmapping it.

Noticed by KASAN when forcing a reset via:

  echo 1 > /sys/bus/pci/.../reset

The same code path can presumably be exercised in remove() and
shutdown().

[  205.390377] mwifiex_pcie 0000:01:00.0: info: shutdown mwifiex...
[  205.400393] ==================================================================
[  205.407719] BUG: KASAN: use-after-free in mwifiex_unmap_pci_memory.isra.14+0x4c/0x100 [mwifiex_pcie] at addr ffffffc0ad471b28
[  205.419040] Read of size 16 by task bash/1913
[  205.423421] =============================================================================
[  205.431625] BUG skbuff_head_cache (Tainted: G    B          ): kasan: bad access detected
[  205.439815] -----------------------------------------------------------------------------
[  205.439815]
[  205.449534] INFO: Allocated in __build_skb+0x48/0x114 age=1311 cpu=4 pid=1913
[  205.456709] alloc_debug_processing+0x124/0x178
[  205.461282] ___slab_alloc.constprop.58+0x528/0x608
[  205.466196] __slab_alloc.isra.54.constprop.57+0x44/0x54
[  205.471542] kmem_cache_alloc+0xcc/0x278
[  205.475497] __build_skb+0x48/0x114
[  205.479019] __netdev_alloc_skb+0xe0/0x170
[  205.483244] mwifiex_alloc_cmd_buffer+0x68/0xdc [mwifiex]
[  205.488759] mwifiex_init_fw+0x40/0x6cc [mwifiex]
[  205.493584] _mwifiex_fw_dpc+0x158/0x520 [mwifiex]
[  205.498491] mwifiex_reinit_sw+0x2c4/0x398 [mwifiex]
[  205.503510] mwifiex_pcie_reset_notify+0x114/0x15c [mwifiex_pcie]
[  205.509643] pci_reset_notify+0x5c/0x6c
[  205.513519] pci_reset_function+0x6c/0x7c
[  205.517567] reset_store+0x68/0x98
[  205.521003] dev_attr_store+0x54/0x60
[  205.524705] sysfs_kf_write+0x9c/0xb0
[  205.528413] INFO: Freed in __kfree_skb+0xb0/0xbc age=131 cpu=4 pid=1913
[  205.535064] free_debug_processing+0x264/0x370
[  205.539550] __slab_free+0x84/0x40c
[  205.543075] kmem_cache_free+0x1c8/0x2a0
[  205.547030] __kfree_skb+0xb0/0xbc
[  205.550465] consume_skb+0x164/0x178
[  205.554079] __dev_kfree_skb_any+0x58/0x64
[  205.558304] mwifiex_free_cmd_buffer+0xa0/0x158 [mwifiex]
[  205.563817] mwifiex_shutdown_drv+0x578/0x5c4 [mwifiex]
[  205.569164] mwifiex_shutdown_sw+0x178/0x310 [mwifiex]
[  205.574353] mwifiex_pcie_reset_notify+0xd4/0x15c [mwifiex_pcie]
[  205.580398] pci_reset_notify+0x5c/0x6c
[  205.584274] pci_dev_save_and_disable+0x24/0x6c
[  205.588837] pci_reset_function+0x30/0x7c
[  205.592885] reset_store+0x68/0x98
[  205.596324] dev_attr_store+0x54/0x60
[  205.600017] sysfs_kf_write+0x9c/0xb0
...
[  205.800488] Call trace:
[  205.802980] [<ffffffc00020a69c>] dump_backtrace+0x0/0x190
[  205.808415] [<ffffffc00020a96c>] show_stack+0x20/0x28
[  205.813506] [<ffffffc0005d020c>] dump_stack+0xa4/0xcc
[  205.818598] [<ffffffc0003be44c>] print_trailer+0x158/0x168
[  205.824120] [<ffffffc0003be5f0>] object_err+0x4c/0x5c
[  205.829210] [<ffffffc0003c45bc>] kasan_report+0x334/0x500
[  205.834641] [<ffffffc0003c3994>] check_memory_region+0x20/0x14c
[  205.840593] [<ffffffc0003c3b14>] __asan_loadN+0x14/0x1c
[  205.845879] [<ffffffbffc46171c>] mwifiex_unmap_pci_memory.isra.14+0x4c/0x100 [mwifiex_pcie]
[  205.854282] [<ffffffbffc461864>] mwifiex_pcie_delete_cmdrsp_buf+0x94/0xa8 [mwifiex_pcie]
[  205.862421] [<ffffffbffc462028>] mwifiex_pcie_free_buffers+0x11c/0x158 [mwifiex_pcie]
[  205.870302] [<ffffffbffc4620d4>] mwifiex_pcie_down_dev+0x70/0x80 [mwifiex_pcie]
[  205.877736] [<ffffffbffc1397a8>] mwifiex_shutdown_sw+0x190/0x310 [mwifiex]
[  205.884658] [<ffffffbffc4606b4>] mwifiex_pcie_reset_notify+0xd4/0x15c [mwifiex_pcie]
[  205.892446] [<ffffffc000635f54>] pci_reset_notify+0x5c/0x6c
[  205.898048] [<ffffffc00063a044>] pci_dev_save_and_disable+0x24/0x6c
[  205.904350] [<ffffffc00063cf0c>] pci_reset_function+0x30/0x7c
[  205.910134] [<ffffffc000641118>] reset_store+0x68/0x98
[  205.915312] [<ffffffc000771588>] dev_attr_store+0x54/0x60
[  205.920750] [<ffffffc00046f53c>] sysfs_kf_write+0x9c/0xb0
[  205.926182] [<ffffffc00046dfb0>] kernfs_fop_write+0x184/0x1f8
[  205.931963] [<ffffffc0003d64f4>] __vfs_write+0x6c/0x17c
[  205.937221] [<ffffffc0003d7164>] vfs_write+0xf0/0x1c4
[  205.942310] [<ffffffc0003d7da0>] SyS_write+0x78/0xd8
[  205.947312] [<ffffffc000204634>] el0_svc_naked+0x24/0x28
...
[  205.998268] ==================================================================

This bug has been around in different forms for a while. It was sort of
noticed in commit 955ab095c51a ("mwifiex: Do not kfree cmd buf while
unregistering PCIe"), but it just fixed the double-free, without
acknowledging the potential for use-after-free.

Fixes: fc3314609047 ("mwifiex: use pci_alloc/free_consistent APIs for PCIe")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mwifiex: MAC randomization should not be persistent

commit 7e2f18f06408ff56d7f75e68de8064777137b319 upstream.

nl80211 provides the NL80211_SCAN_FLAG_RANDOM_ADDR for every scan
request that should be randomized; the absence of such a flag means we
should not randomize. However, mwifiex was stashing the latest
randomization request and *always* using it for future scans, even those
that didn't set the flag.

Let's zero out the randomization info whenever we get a scan request
without NL80211_SCAN_FLAG_RANDOM_ADDR. I'd prefer to remove
priv->random_mac entirely (and plumb the randomization MAC properly
through the call sequence), but the spaghetti is a little difficult to
unravel here for me.

Fixes: c2a8f0ff9c6c ("mwifiex: support random MAC address for scanning")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: rtl8821ae: setup 8812ae RFE according to device type

commit 46cfa2148e7371c537efff1a1c693e58f523089d upstream.

Current channel switch implementation sets 8812ae RFE reg value assuming
that device always has type 2.

Extend possible RFE types set and write corresponding reg values.

Source for new code is
http://dlcdnet.asus.com/pub/ASUS/wireless/PCE-AC51/DR_PCE_AC51_20232801152016.zip

Signed-off-by: Maxim Samoylov <max7255@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: MD_CLOSING needs to be cleared after called md_set_readonly or do_md_stop

commit 065e519e71b2c1f41936cce75b46b5ab34adb588 upstream.

if called md_set_readonly and set MD_CLOSING bit, the mddev cannot
be opened any more due to the MD_CLOING bit wasn't cleared. Thus it
needs to be cleared in md_ioctl after any call to md_set_readonly()
or do_md_stop().

Signed-off-by: NeilBrown <neilb@suse.com>
Fixes: af8d8e6f0315 ("md: changes for MD_STILL_CLOSED flag")
Signed-off-by: Zhilong Liu <zlliu@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: update slab_cache before releasing new stripes when stripes resizing

commit 583da48e388f472e8818d9bb60ef6a1d40ee9f9d upstream.

When growing raid5 device on machine with small memory, there is chance that
mdadm will be killed and the following bug report can be observed. The same
bug could also be reproduced in linux-4.10.6.

[57600.075774] BUG: unable to handle kernel NULL pointer dereference at           (null)
[57600.083796] IP: [<ffffffff81a6aa87>] _raw_spin_lock+0x7/0x20
[57600.110378] PGD 421cf067 PUD 4442d067 PMD 0
[57600.114678] Oops: 0002 [#1] SMP
[57600.180799] CPU: 1 PID: 25990 Comm: mdadm Tainted: P           O    4.2.8 #1
[57600.187849] Hardware name: To be filled by O.E.M. To be filled by O.E.M./MAHOBAY, BIOS QV05AR66 03/06/2013
[57600.197490] task: ffff880044e47240 ti: ffff880043070000 task.ti: ffff880043070000
[57600.204963] RIP: 0010:[<ffffffff81a6aa87>]  [<ffffffff81a6aa87>] _raw_spin_lock+0x7/0x20
[57600.213057] RSP: 0018:ffff880043073810  EFLAGS: 00010046
[57600.218359] RAX: 0000000000000000 RBX: 000000000000000c RCX: ffff88011e296dd0
[57600.225486] RDX: 0000000000000001 RSI: ffffe8ffffcb46c0 RDI: 0000000000000000
[57600.232613] RBP: ffff880043073878 R08: ffff88011e5f8170 R09: 0000000000000282
[57600.239739] R10: 0000000000000005 R11: 28f5c28f5c28f5c3 R12: ffff880043073838
[57600.246872] R13: ffffe8ffffcb46c0 R14: 0000000000000000 R15: ffff8800b9706a00
[57600.253999] FS:  00007f576106c700(0000) GS:ffff88011e280000(0000) knlGS:0000000000000000
[57600.262078] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[57600.267817] CR2: 0000000000000000 CR3: 00000000428fe000 CR4: 00000000001406e0
[57600.274942] Stack:
[57600.276949]  ffffffff8114ee35 ffff880043073868 0000000000000282 000000000000eb3f
[57600.284383]  ffffffff81119043 ffff880043073838 ffff880043073838 ffff88003e197b98
[57600.291820]  ffffe8ffffcb46c0 ffff88003e197360 0000000000000286 ffff880043073968
[57600.299254] Call Trace:
[57600.301698]  [<ffffffff8114ee35>] ? cache_flusharray+0x35/0xe0
[57600.307523]  [<ffffffff81119043>] ? __page_cache_release+0x23/0x110
[57600.313779]  [<ffffffff8114eb53>] kmem_cache_free+0x63/0xc0
[57600.319344]  [<ffffffff81579942>] drop_one_stripe+0x62/0x90
[57600.324915]  [<ffffffff81579b5b>] raid5_cache_scan+0x8b/0xb0
[57600.330563]  [<ffffffff8111b98a>] shrink_slab.part.36+0x19a/0x250
[57600.336650]  [<ffffffff8111e38c>] shrink_zone+0x23c/0x250
[57600.342039]  [<ffffffff8111e4f3>] do_try_to_free_pages+0x153/0x420
[57600.348210]  [<ffffffff8111e851>] try_to_free_pages+0x91/0xa0
[57600.353959]  [<ffffffff811145b1>] __alloc_pages_nodemask+0x4d1/0x8b0
[57600.360303]  [<ffffffff8157a30b>] check_reshape+0x62b/0x770
[57600.365866]  [<ffffffff8157a4a5>] raid5_check_reshape+0x55/0xa0
[57600.371778]  [<ffffffff81583df7>] update_raid_disks+0xc7/0x110
[57600.377604]  [<ffffffff81592b73>] md_ioctl+0xd83/0x1b10
[57600.382827]  [<ffffffff81385380>] blkdev_ioctl+0x170/0x690
[57600.388307]  [<ffffffff81195238>] block_ioctl+0x38/0x40
[57600.393525]  [<ffffffff811731c5>] do_vfs_ioctl+0x2b5/0x480
[57600.399010]  [<ffffffff8115e07b>] ? vfs_write+0x14b/0x1f0
[57600.404400]  [<ffffffff811733cc>] SyS_ioctl+0x3c/0x70
[57600.409447]  [<ffffffff81a6ad97>] entry_SYSCALL_64_fastpath+0x12/0x6a
[57600.415875] Code: 00 00 00 00 55 48 89 e5 8b 07 85 c0 74 04 31 c0 5d c3 ba 01 00 00 00 f0 0f b1 17 85 c0 75 ef b0 01 5d c3 90 31 c0 ba 01 00 00 00 <f0> 0f b1 17 85 c0 75 01 c3 55 89 c6 48 89 e5 e8 85 d1 63 ff 5d
[57600.435460] RIP  [<ffffffff81a6aa87>] _raw_spin_lock+0x7/0x20
[57600.441208]  RSP <ffff880043073810>
[57600.444690] CR2: 0000000000000000
[57600.448000] ---[ end trace cbc6b5cc4bf9831d ]---

The problem is that resize_stripes() releases new stripe_heads before assigning new
slab cache to conf->slab_cache. If the shrinker function raid5_cache_scan() gets called
after resize_stripes() starting releasing new stripes but right before new slab cache
being assigned, it is possible that these new stripe_heads will be freed with the old
slab_cache which was already been destoryed and that triggers this bug.

Signed-off-by: Dennis Yang <dennisyang@qnap.com>
Fixes: edbe83ab4c27 ("md/raid5: allow the stripe_cache to grow and shrink.")
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm space map disk: fix some book keeping in the disk space map

commit 0377a07c7a035e0d033cd8b29f0cb15244c0916a upstream.

When decrementing the reference count for a block, the free count wasn't
being updated if the reference count went to zero.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm thin metadata: call precommit before saving the roots

commit 91bcdb92d39711d1adb40c26b653b7978d93eb98 upstream.

These calls were the wrong way round in __write_initial_superblock.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm bufio: make the parameter "retain_bytes" unsigned long

commit 13840d38016203f0095cd547b90352812d24b787 upstream.

Change the type of the parameter "retain_bytes" from unsigned to
unsigned long, so that on 64-bit machines the user can set more than
4GiB of data to be retained.

Also, change the type of the variable "count" in the function
"__evict_old_buffers" to unsigned long. The assignment
"count = c->n_buffers[LIST_CLEAN] + c->n_buffers[LIST_DIRTY];"
could result in unsigned long to unsigned overflow and that could result
in buffers not being freed when they should.

While at it, avoid division in get_retain_buffers(). Division is slow,
we can change it to shift because we have precalculated the log2 of
block size.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm cache metadata: fail operations if fail_io mode has been established

commit 10add84e276432d9dd8044679a1028dd4084117e upstream.

Otherwise it is possible to trigger crashes due to the metadata being
inaccessible yet these methods don't safely account for that possibility
without these checks.

Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm mpath: split and rename activate_path() to prepare for its expanded use

commit 89bfce763e43fa4897e0d3af6b29ed909df64cfd upstream.

activate_path() is renamed to activate_path_work() which now calls
activate_or_offline_path(). activate_or_offline_path() will be used
by the next commit.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm bufio: check new buffer allocation watermark every 30 seconds

commit 390020ad2af9ca04844c4f3b1f299ad8746d84c8 upstream.

dm-bufio checks a watermark when it allocates a new buffer in
__bufio_new(). However, it doesn't check the watermark when the user
changes /sys/module/dm_bufio/parameters/max_cache_size_bytes.

This may result in a problem - if the watermark is high enough so that
all possible buffers are allocated and if the user lowers the value of
"max_cache_size_bytes", the watermark will never be checked against the
new value because no new buffer would be allocated.

To fix this, change __evict_old_buffers() so that it checks the
watermark. __evict_old_buffers() is called every 30 seconds, so if the
user reduces "max_cache_size_bytes", dm-bufio will react to this change
within 30 seconds and decrease memory consumption.

Depends-on: 1b0fb5a5b2 ("dm bufio: avoid a possible ABBA deadlock")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm bufio: avoid a possible ABBA deadlock

commit 1b0fb5a5b2dc0dddcfa575060441a7176ba7ac37 upstream.

__get_memory_limit() tests if dm_bufio_cache_size changed and calls
__cache_size_refresh() if it did.  It takes dm_bufio_clients_lock while
it already holds the client lock.  However, lock ordering is violated
because in cleanup_old_buffers() dm_bufio_clients_lock is taken before
the client lock.

This results in a possible deadlock and lockdep engine warning.

Fix this deadlock by changing mutex_lock() to mutex_trylock().  If the
lock can't be taken, it will be re-checked next time when a new buffer
is allocated.

Also add "unlikely" to the if condition, so that the optimizer assumes
that the condition is false.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm raid: select the Kconfig option CONFIG_MD_RAID0

commit 7b81ef8b14f80033e4a4168d199a0f5fd79b9426 upstream.

Since the commit 0cf4503174c1 ("dm raid: add support for the MD RAID0
personality"), the dm-raid subsystem can activate a RAID-0 array.
Therefore, add MD_RAID0 to the dependencies of DM_RAID, so that MD_RAID0
will be selected when DM_RAID is selected.

Fixes: 0cf4503174c1 ("dm raid: add support for the MD RAID0 personality")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm btree: fix for dm_btree_find_lowest_key()

commit 7d1fedb6e96a960aa91e4ff70714c3fb09195a5a upstream.

dm_btree_find_lowest_key() is giving incorrect results. find_key()
traverses the btree correctly for finding the highest key, but there is
an error in the way it traverses the btree for retrieving the lowest
key. dm_btree_find_lowest_key() fetches the first key of the rightmost
block of the btree instead of fetching the first key from the leftmost
block.

Fix this by conditionally passing the correct parameter to value64()
based on the @find_highest flag.

Signed-off-by: Erez Zadok <ezk@fsl.cs.sunysb.edu>
Signed-off-by: Vinothkumar Raja <vinraja@cs.stonybrook.edu>
Signed-off-by: Nidhi Panpalia <npanpalia@cs.stonybrook.edu>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

infiniband: call ipv6 route lookup via the stub interface

commit eea40b8f624f25cbc02d55f2d93203f60cee9341 upstream.

The infiniband address handle can be triggered to resolve an ipv6
address in response to MAD packets, regardless of the ipv6
module being disabled via the kernel command line argument.

That will cause a call into the ipv6 routing code, which is not
initialized, and a conseguent oops.

This commit addresses the above issue replacing the direct lookup
call with an indirect one via the ipv6 stub, which is properly
initialized according to the ipv6 status (e.g. if ipv6 is
disabled, the routing lookup fails gracefully)

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mlx5: Fix mlx5_ib_map_mr_sg mr length

commit 0a49f2c31c3efbeb0de3e4b5598764887f629be2 upstream.

In case we got an initial sg_offset, we need to
account for it in the mr length.

Fixes: ff2ba9936591 ("IB/core: Add passing an offset into the SG to ib_map_mr_sg")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: cs4271: configure reset GPIO as output

commit 49b2e27ab9f66b0a22c21980ad8118a4038324ae upstream.

During reset "refactoring" the output configuration was lost.
This commit repairs sound on EDB93XX boards.

Fixes: 9a397f4 ("ASoC: cs4271: add regulator consumer support")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm_crb: check for bad response size

commit 8569defde8057258835c51ce01a33de82e14b148 upstream.

Make sure size of response buffer is at least 6 bytes, or
we will underflow and pass large size_t to memcpy_fromio().
This was encountered while testing earlier version of
locality patchset.

Fixes: 30fc8d138e912 ("tpm: TPM 2.0 CRB Interface")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: add sleep only for retry in i2c_nuvoton_write_status()

commit 0afb7118ae021e80ecf70f5a3336e0935505518a upstream.

Currently, there is an unnecessary 1 msec delay added in
i2c_nuvoton_write_status() for the successful case. This
function is called multiple times during send() and recv(),
which implies adding multiple extra delays for every TPM
operation.

This patch calls usleep_range() only if retry is to be done.

Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: msleep() delays - replace with usleep_range() in i2c nuvoton driver

commit a233a0289cf9a96ef9b42c730a7621ccbf9a6f98 upstream.

Commit 500462a9de65 "timers: Switch to a non-cascading wheel" replaced
the 'classic' timer wheel, which aimed for near 'exact' expiry of the
timers.  Their analysis was that the vast majority of timeout timers
are used as safeguards, not as real timers, and are cancelled or
rearmed before expiration.  The only exception noted to this were
networking timers with a small expiry time.

Not included in the analysis was the TPM polling timer, which resulted
in a longer normal delay and, every so often, a very long delay.  The
non-cascading wheel delay is based on CONFIG_HZ.  For a description of
the different rings and their delays, refer to the comments in
kernel/time/timer.c.

Below are the delays given for rings 0 - 2, which explains the longer
"normal" delays and the very, long delays as seen on systems with
CONFIG_HZ 250.

* HZ 1000 steps
* Level Offset  Granularity            Range
*  0      0         1 ms                0 ms - 63 ms
*  1     64         8 ms               64 ms - 511 ms
*  2    128        64 ms              512 ms - 4095 ms (512ms - ~4s)

* HZ  250
* Level Offset  Granularity            Range
*  0      0         4 ms                0 ms - 255 ms
*  1     64        32 ms              256 ms - 2047 ms (256ms - ~2s)
*  2    128       256 ms             2048 ms - 16383 ms (~2s - ~16s)

Below is a comparison of extending the TPM with 1000 measurements,
using msleep() vs. usleep_delay() when configured for 1000 hz vs. 250
hz, before and after commit 500462a9de65.

linux-4.7 | msleep() usleep_range()
1000 hz: 0m44.628s | 1m34.497s 29.243s
250 hz: 1m28.510s | 4m49.269s 32.386s

linux-4.7  | min-max (msleep)  min-max (usleep_range)
1000 hz: 0:017 - 2:760s | 0:015 - 3:967s    0:014 - 0:418s
250 hz: 0:028 - 1:954s | 0:040 - 4:096s    0:016 - 0:816s

This patch replaces the msleep() with usleep_range() calls in the
i2c nuvoton driver with a consistent max range value.

Signed-of-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm_tis_spi: Add small delay after last transfer

commit 5cc0101d1f88500f8901d01b035af743215d4c3a upstream.

Testing the implementation with a Raspberry Pi 2 showed that under some
circumstances its SPI master erroneously releases the CS line before the
transfer is complete, i.e. before the end of the last clock. In this case
the TPM ignores the transfer and misses for example the GO command. The
driver is unable to detect this communication problem and will wait for a
command response that is never going to arrive, timing out eventually.

As a workaround, the small delay ensures that the CS line is held long
enough, even with a faulty SPI master. Other SPI masters are not affected,
except for a negligible performance penalty.

Fixes: 0edbfea537d1 ("tpm/tpm_tis_spi: Add support for spi phy")
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Peter Huewe <peter.huewe@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Benoit Houyere <benoit.houyere@st.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>