staging: comedi: das1800: pass dma descriptor to das1800_flush_dma_channel()

Instead of passing the dma descriptor 'chan' and 'virt_addr' just pass the
dma descriptor.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: introduce dt282x_isadma_disable()

According to Documentation/DMA-ISA-LPC.txt, the DMA lock needs to be
claimed before using any of the ISA DMA routines. Introduce a helper
function to disable the ISA DMA controller and add the necessary
locking calls.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: introduce dt282x_isadma_program()

Introduce a helper function to program the ISA DMA controller. Program
the ISA DMA as described in Documentation/DMA-ISA-LPC.txt.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl816: introduce pcl816_isadma_disable()

According to Documentation/DMA-ISA-LPC.txt, the DMA lock needs to be
claimed before using any of the ISA DMA routines. Introduce a helper
function to disable the ISA DMA controller and add the necessary
locking calls.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl816: introduce pcl816_isadma_program()

Introduce a helper function to program the ISA DMA controller. Program
the ISA DMA as described in Documentation/DMA-ISA-LPC.txt.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl818: introduce pcl818_isadma_disable()

According to Documentation/DMA-ISA-LPC.txt, the DMA lock needs to be
claimed before using any of the ISA DMA routines. Introduce a helper
function to disable the ISA DMA controller and add the necessary
locking calls.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl818: introduce pcl818_isadma_program()

Introduce a helper function to program the ISA DMA controller. Program
the ISA DMA as described in Documentation/DMA-ISA-LPC.txt.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: board is not a PCI device

The DAS16 board is an ISA device not a PCI device. For aesthetics, use
dma_{alloc,free}_coherent() to allocate and free the DMA buffers instead
of the PCI versions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: introduce das16_free_dma()

For aesthetics, move the freeing of the DMA channel and the buffers to
a helper function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16 introduce das16_alloc_dma()

DMA is optional with this driver. Introduce a helper function to request
the DMA channel and allocate the buffers. Don't fail the driver attach
if the user passed an invalid DMA channel or the channel cannot be
requested.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: introduce struct das16_dma_desc

For aesthetics, introduce a struct to hold the DMA descriptor data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: remove VIRT_TO_BUS dependancy

Use dma_{alloc,free}_coherent() to allocate and free the DMA buffers.
This removes the dependancy on VIRT_TO_BUS.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: introduce struct dt282x_dma_desc

For aesthetics, introduce a struct to hold the DMA descriptor data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: introduce dt282x_alloc_dma()

The IRA and DMA are optional with this driver but both are required to
support async commands. Introduce a helper function to request the IRQ
and DMA channel and allocate the buffers. Don't fail the driver attach
if the user passed an invalid IRQ or DMA channel or they cannot be
requested.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl812: remove VIRT_TO_BUS dependancy

Use dma_{alloc,free}_coherent() to allocate and free the DMA buffers.
This removes the dependancy on VIRT_TO_BUS.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl812: introduce struct pcl812_dma_desc

For aesthetics, introduce a struct to hold the DMA descriptor data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl812: introduce pcl812_free_dma()

For aesthetics, move the freeing of the DMA channel and the buffers to
a helper function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl812: introduce pcl812_alloc_dma()

DMA is optional with this driver. Introduce a helper function to request
the DMA channel and allocate the buffers. Don't fail the driver attach
if the user passed an invalid DMA channel or the channel cannot be
requested.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl816: fix short DMA transactions

When the cmd->stop_src == TRIG_COUNT the last DMA transfer might be smaller
than the buffer size. This results in invalid data being added to the async
buffer.

Add a 'size' member to the DMA descriptor and initialize it with the
actual size of the DMA transfer. Use that in interrupt and ai subdevice
(*poll) function to return the proper number of samples. Use the
comedi_bytes_to_samples() helper to convert the byte size to comedi
samples in the interrupt handler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl816: remove VIRT_TO_BUS dependancy

Use dma_{alloc,free}_coherent() to allocate and free the DMA buffers.
This removes the dependancy on VIRT_TO_BUS.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl816: introduce struct pcl816_dma_desc

For aesthetics, introduce a struct to hold the DMA descriptor data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl816: introduce pcl816_free_dma()

For aesthetics, move the freeing of the DMA channel and the buffers to
a helper function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl816: introduce pcl816_alloc_dma()

The IRA and DMA are optional with this driver but both are required to
support async commands. Introduce a helper function to request the IRQ
and DMA channel and allocate the buffers. Don't fail the driver attach
if the user passed an invalid IRQ or DMA channel or they cannot be
requested.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl818: fix pcl818_handle_dma() for short DMA transaction

Currently this function always transfers the full DMA buffer to the comedi
async buffer. When the cmd->stop_src == TRIG_COUNT the last DMA transfer
might be smaller than the buffer size. This results in invalid data being
added to the asunc buffer.

Add a 'size' member to the DMA descriptor and initialize it with the
actual size of the DMA transfer. Use that in pcl818_handle_dma() to
return the proper number of samples. Use the comedi_bytes_to_samples()
helper to convert the byte size to comedi samples. Remove the unnecessary
'bufptr' local variable.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl818: remove VIRT_TO_BUS dependancy

Use dma_{alloc,free}_coherent() to allocate and free the DMA buffers.
This removes the dependancy on VIRT_TO_BUS.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl818: introduce struct pcl818_dma_desc

For aesthetics, introduce a struct to hold the DMA descriptor data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl818: introduce pcl818_dma_free()

For aesthetics, move the freeing of the DMA channel and the buffers to
a helper function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl818: introduce pcl818_alloc_dma()

DMA is optional with this driver. Introduce a helper function to request
the DMA channel and allocate the buffers. Don't fail the driver attach
if the user passed an invalid DMA channel or the channel cannot be
requested.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc: remove VIRT_TO_BUS dependancy

Use dma_{alloc,free}_coherent() to allocate and free the DMA buffers.
This removes the dependancy on VIRT_TO_BUS.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc_isadma: tidy up labpc_init_dma_chan()

DMA support is optional for the labpc driver. The return value from
labpc_init_dma_chan() is not even checked by the caller.

Change the return type to void and tidy up the function a bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc: introduce struct labpc_dma_desc

For aesthetics, introduce a struct to hold the DMA descriptor data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_at_a2150: remove VIRT_TO_BUS dependancy

Use dma_{alloc,free}_coherent() to allocate and free the DMA buffers.
This removes the dependancy on VIRT_TO_BUS.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_at_a2150: introduce struct a2150_dma_desc

For aesthetics, introduce a struct to hold the DMA descriptor data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_at_a2150: introduce a2150_free_dma()

For aesthetics, introduce a helper function to free the DMA channel and
buffer.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_at_a2150: introduce a2150_alloc_irq_dma()

This driver requires an IRQ and DMA in order to support async commands.

For aesthetics, introduce a helper function to request the IRQ and DMA
channels and allocate the DMA buffer. Since the async command support
is optional, make the helper function handle any request/allocation
errors and allow the driver to still attach without async command support.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_at_a2150: use comedi_bytes_per_sample()

For aesthetics, use the helper function to get the byte size of each sample
instead of using sizeof() the first buffer element.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_at_a2150: remove 'volatile' from private data variable

As indicated by checkpatch.pl, "WARNING: Use of volatile is usually
wrong: ...", the 'count' member of the private data does not need to
be volatile.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: introduce das1800_free_dma()

For aesthetics, introduce a helper function to free the DMA channels and
allocated buffers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: remove VIRT_TO_BUS dependancy

Use dma_{alloc,free}_coherent() to allocate and free the DMA buffers.
This removes the dependancy on VIRT_TO_BUS.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: tidy up das1800_init_dma()

Refactor this function so that a for loop can be used to request and
set up the two DMA descriptors.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: introduce struct das1800_dma_desc

For aesthetics, introduce a struct to hold the DMA descriptor data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: separate AI FIFO bounce buffer from DMA buffer

This driver can use DMA or the hardware FIFO to read analog input samples.
When DMA is enabled it's also possible for some async commands to cause
DMA to be disabled and the FIFO is used instead.

Currently the first DMA channels buffer is used for the bounce buffer
when using the FIFO. For aesthetics, add a new member to the private
data and use that for the FIFO bounce buffer.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: reduce indent level of das1800_init_dma()

An IRQ and at least one DMA channel are required to use DMA with this driver.
Move the check to the caller to reduce the indent level of this function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove VIRT_TO_BUS dependancy

This driver no longer uses virt_to_bus(). Remove the dependancy.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: Remove check of ieee in rtl819x_BAProc.c

This patch fixes following smatch warning:

drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c:117
ieee80211_ADDBA() warn: variable dereferenced before check 'ieee' (see line 114)

As ieee can not be NULL at this point, all such checks are removed.

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Fix duplicated conditional branch

Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8192u driver cleanup

Correct redundant initialization reported by sparse

Signed-off-by: Rene Kolarik <rene.kolarik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: remove spaces before commas

checkpatch.pl fix for
ERROR: space prohibited before that ',' (ctx:WxE)

Signed-off-by: Max Perepelitsyn <mperepelitsyn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: fixed a space coding style issue

Fixed a space coding style issue in 3-dimensional array initialization
which was found when running checkpatch.pl script on rtl819x_HTProc.c.

Signed-off-by: Gangadhar Vukkesala <gangs.freelancer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: rtllib_rx.c: Remove some unused functions

Removes some functions that are not used anywhere:
update_ibss_network() rtllib_SignalStrengthTranslate()

This was partially found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: rtl8192e: rtl_pm.c: Remove some unused functions

Removes some functions that are not used anywhere:
rtl8192E_save_state() rtl8192E_enable_wake()

This was partially found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: core: rtw_mlme_ext.c: Remove unused function

Remove the function NULL_hdl() that is not used anywhere.

This was partially found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: rtl871x_mp_ioctl.c: Remove some unused functions

Removes some functions that are not used anywhere:
oid_rt_pro_h2c_get_rate_table_hdl() oid_rt_pro_h2c_set_rate_table_hdl()
oid_rt_pro_set_pwrstate_hdl() oid_rt_pro_qry_pwrstate_hdl()
oid_rt_pro_set_basic_rate_hdl() oid_rt_pro_set_power_tracking_hdl()
oid_rt_pro_set_data_rate_ex_hdl() oid_rt_pro_cfg_debug_message_hdl()
oid_rt_poll_rx_status_hdl() oid_rt_pro_set_rf_intfs_hdl()
oid_rt_wr_attrib_mem_hdl() oid_rt_rd_attrib_mem_hdl()
oid_rt_pro8711_pkt_loss_hdl() oid_rt_pro8711_wi_poll_hdl()
oid_rt_pro_write16_eeprom_hdl() oid_rt_pro_read16_eeprom_hdl()
oid_rt_pro_write_txcmd_hdl() oid_rt_pro_burst_write_register_hdl()
oid_rt_pro_burst_read_register_hdl() oid_rt_pro8711_join_bss_hdl()
oid_rt_pro_set_pkt_test_mode_hdl() oid_rt_pro_set_tx_agc_offset_hdl()
oid_rt_set_crystal_cap_hdl() oid_rt_pro_rw_efuse_pgpkt_hdl()
oid_rt_pro_rx_packet_type_hdl() oid_rt_pro_query_dr_variable_hdl()
oid_rt_pro_dele_sta_info_hdl() oid_rt_pro_add_sta_info_hdl()
oid_rt_pro_encryption_ctrl_hdl()

This was partially found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: removed an unnecessary else statement

As per checkpatch warning, removed an unnecessary else statement
proceeding an if statement with a return.

Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: rtl8192e: rtl_cam.c: Remove unused function

Remove the function CAM_read_entry() that is not used anywhere.

This was partially found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: os_dep: usb_ops_linux.c: Remove unused function

Remove the function usb_writeN() that is not used anywhere.

This was partially found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: hal: rtl8188e_hal_init.c: Remove unused function

Remove the function GetEEPROMSize8188E() that is not used anywhere.

This was partially found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: hal: rtl8188e_cmd.c: Remove unused function

Remove the function rtl8188e_set_rssi_cmd() that is not used anywhere.

This was partially found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u : fix space before , coding style issue in r8190_rtl8256.c

This is a patch to r8190_rtl8256.c file that fixes space before , warning found by checkpatch.pl tool

Signed-off-by: Mohammad Jamal<md.jamalmohiuddin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: rejoin split quoted strings

Fix a checkpatch.pl warning regarding quoted string splits across lines.
While each join of these quoted strings results in a new checkpatch.pl
"lines over 80 characters" warning, the regained ability to grep for
these log strings in the codebase is, I would argue, well worth the
trade-off.

Signed-off-by: Jonathan Jin <jjin082693@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Fixed a space coding style issue.

Fixed a space coding style issue which was found when running checkpatch.pl
script on rtw_ap.c.

Signed-off-by: Gangadhar Vukkesala <gangs.freelancer@gmail.com>
Reviewed-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu: {core, hal, include}: Removed inline function

Removed inline function get_my_bssid and open coded all its references

Signed-off-by: Abel Moyo <abelmoyo.ab@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: fix sparse warning

drivers/staging/rtl8723au/core/rtw_xmit.c:2375 warning: symbol
'rtw_ack_tx_done23a' was not declared. Should it be static?

Function 'rtw_ack_tx_done23a' seems to be unused in current staging
code.

Signed-off-by: Alexey Tulia <alexey.tulia@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: hal: odm.c: Remove some unused functions

Removes some functions that are not used anywhere:
odm_1R_CCA23a() odm_TXPowerTrackingCheckAP() odm_TXPowerTrackingCheckMP()
odm_RSSIMonitorCheck23aAP() odm_RSSIMonitorCheck23aMP() odm_RSSIMonitorInit()
odm_RefreshRateAdaptiveMask23aAPADSL23a() odm_RefreshRateAdaptiveMask23aMP23a()

This was partially found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8723au: core: rtw_ap: checkpatch.pl fixes

Fixing styling errors found with checkpatch.pl. These include:
"(foo*)" should be "(foo *)"
space required after that ';'

...totalling 5 styling errors.

Signed-off-by: Joe Borg <joe@josephb.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Fix sparse invalid assignment warnings

This is a patch to the hal/rtl8723au_xmit.c file that fixes the
following warnings found by sparse tool:

drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:88:22: warning: invalid assignment: |=
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:88:22:    left side has type unsigned int
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:88:22:    right side has type restricted __le32
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:91:22: warning: invalid assignment: |=
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:91:22:    left side has type unsigned int
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:91:22:    right side has type restricted __le32
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:99:22: warning: invalid assignment: |=
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:99:22:    left side has type unsigned int
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:99:22:    right side has type restricted __le32
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:103:30: warning: invalid assignment: |=
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:103:30:    left side has type unsigned int
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:103:30:    right side has type restricted __le32
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:106:38: warning: invalid assignment: |=
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:106:38:    left side has type unsigned int
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:106:38:    right side has type restricted __le32
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:108:38: warning: invalid assignment: |=
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:108:38:    left side has type unsigned int
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:108:38:    right side has type restricted __le32
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:112:38: warning: invalid assignment: |=
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:112:38:    left side has type unsigned int
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:112:38:    right side has type restricted __le32
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:120:22: warning: invalid assignment: |=
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:120:22:    left side has type unsigned int
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:120:22:    right side has type restricted __le32
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:123:30: warning: invalid assignment: |=
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:123:30:    left side has type unsigned int
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:123:30:    right side has type restricted __le32
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:125:30: warning: invalid assignment: |=
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:125:30:    left side has type unsigned int
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:125:30:    right side has type restricted __le32
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:129:30: warning: invalid assignment: |=
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:129:30:    left side has type unsigned int
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:129:30:    right side has type restricted __le32
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:184:51: warning: incorrect type in argument 2 (different base types)
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:184:51:    expected unsigned int [usertype] *pdw
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:184:51:    got restricted __le32 *<noident>
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:185:51: warning: incorrect type in argument 2 (different base types)
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:185:51:    expected unsigned int [usertype] *pdw
drivers/staging/rtl8723au//hal/rtl8723au_xmit.c:185:51:    got restricted __le32 *<noident>

Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: core: fixing "foo * bar" should be "foo *bar"

Fixed a coding style error, "foo * bar" should be "foo *bar"

Signed-off-by: Asaf Vertz <asaf.vertz@tandemg.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Fix sparse warnings

Some struct fields in wifi.h are meant to be __le16 but were declared as
unsigned short.  This was reported by sparse:

  rtw_wlan_util.c:538:24: warning: cast to restricted __le16
  rtw_wlan_util.c:1544:29: warning: cast to restricted __le16
  rtw_wlan_util.c:1546:25: warning: cast to restricted __le16

This patch updates the types of the fields in `AC_param` and
`ADDBA_request` structs to be consistent with relevant structs in
include/linux/ieee80211.h.

Signed-off-by: Krzysztof Konopko <kris@konagma.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8723au: os_dep: Fixed a coding style issue.

Fixed a coding style issue for braces.

Signed-off-by: Dean Michael Ancajas <dbancajas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: hal: Removed a space before semicolon

This patch fix the checkpatch.pl warning:

WARNING: space before semicolon prohibited

Signed-off-by: Anjana Sasindran <anjanasasindran123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: hal: Removed space before semicolon

This patch fix the checkpatch.pl warning:

WARNING: spaces prohibited before semicolon

Signed-off-by: Anjana Sasindran <anjanasasindran123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: hal: Added blank line after declaration

This patch fix the checkpatch.pl warning:

WARNING: Missing blank line after declaration

Signed-off-by: Anjana Sasindran <anjanasasindran123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8723au: Fix "'foo * bar' should be 'foo *bar'" errors

Fix checkpatch.pl "'foo * bar' should be 'foo *bar'" errors

Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Hal8723PwrSeq.h: Use BIT() define to match mask value

This is a no-op change, but it improves consistency.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Hal8723PwrSeq.h: Remove SDIO specific entries

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Hal8723PwrSeq.h: Remove PCI specific entries from the power sequence tables

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: HalPwrSeqCmdParsing23a(): Avoid unnecessary variable inits

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Hal8723APhyCfg.h: Remove more unused #defines

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: There is no 11N pseudo PHY here

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Baseband is always configured through PHY regs

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Hal8723APhyCfg.h: Remove some undefined structs and enums

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Use enum for counter and avoid ugly typecast

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Use proper enum defines

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Use correct register names to set parameters to reduce 80M spur

Use the correct register names when setting parameters to reduce 80M
spur. In addition apply updated 80M spur reduction parameters.

Original patch supplied by Andrew Chang <andrew.chang@realtek.com>

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: usb_dvobj_init(): A NULL pointer check for usb_host_endpoints makes no sense

struct usb_host_interface points to an array of
struct usb_host_endpoints - it makes no sense to do a NULL pointer
check for each pointer.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: hal: Removed spaces before semicolon

This patch fix the checkpatch.pl warning:

WARNING: space prohibited before semicolon

Signed-off-by: Anjana Sasindran <anjanasasindran123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8712: Fixes brace coding style in rtl871x_sta_mgt.c

This patch fixes a brace warning in rtl871x_sta_mgt.c found
by the checkpatch.pl tool.

Signed-off-by: Paul Hedman <paul@mybb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: vt6656: Checkpatch fix: else after break or return

This patch fixes the following checkpatch.pl error:
rxtx.c:588: WARNING: else is not generally useful after a break or return

Signed-off-by: Emrys Bayliss <emrys@paradise.net.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: vt6656: Fixed typo in a variable name

Fixed typo in a variable name in dpc.h file.

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: vt6656: Fixed typo in a macro name

Fixed typo in a macro name in card.c and device.h files.

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: vt6655: Fixed a typo

Fixed a typo in mac.c file.

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: [BUG] Protect MACvSelectPage1 with lock.

The device must not flip to page 1 while in interrupt lock causing
loss of connection or dead lock.

Protect from changes to page by adding lock where user can
change the page in CARDvSetRSPINF, vnt_configure and set_channel

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: vt6655: fix a space coding style issue

Fixed a space coding style issue found by checkpatch.pl in rxtx.c.

Signed-off-by: Piotr Kubus <p.t.kubus@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: vt6655: baseband.c: fixed line over 80 characters

Signed-off-by: Sakshi Bansal <sakshi.april5@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Replace C99 comments in power.c and upc.h.

This patch fixes the following checkpatch.pl warnings:

ERROR: do not use C99 // comments
+//

ERROR: do not use C99 // comments
+//  For memory mapped IO

ERROR: do not use C99 // comments
+//

ERROR: do not use C99 // comments
+#endif // __UPC_H__

ERROR: do not use C99 // comments
+ // set period of power up before TBTT

ERROR: do not use C99 // comments
+ // set AID

ERROR: do not use C99 // comments
+ // set ATIM Window

ERROR: do not use C99 // comments
+ // Set AutoSleep

ERROR: do not use C99 // comments
+ // Set HWUTSF

ERROR: do not use C99 // comments
+ // clear always listen beacon

ERROR: do not use C99 // comments
+ // first time set listen next beacon

ERROR: do not use C99 // comments
+ // always listen beacon

ERROR: do not use C99 // comments
+ // enable power saving hw function

ERROR: do not use C99 // comments
+ // disable power saving hw function

ERROR: do not use C99 // comments
+ //clear AutoSleep

ERROR: do not use C99 // comments
+ //clear HWUTSF

ERROR: do not use C99 // comments
+ // set always listen beacon

Signed-off-by: Nicholas Parkanyi <n.parkanyi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: whitespace checkpatch warning fix.

This fixes following checkpatch.pl error:
ERROR: space prohibited before that ',' (ctx:WxW)

Signed-off-by: Krzysztof Adamski <k@japko.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: remove unused function in mac.c

Removed the unused function MACvGetShortRetryLimit, which also
fixed the following sparse warning:
drivers/staging/vt6655/mac.c:162:6: warning:
symbol 'MACvGetShortRetryLimit' was not declared. Should it be static?

Signed-off-by: Fred Chou <fred.chou.nd@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Use ether_addr_copy() on vnt_private members.

This patch fixes checkpatch.pl warning:
WARNING: Prefer ether_addr_copy() over memcpy() if the Ethernet
addresses are __aligned(2)

current_net_addr and permanent_net_addr members of vnt_private alignment
is changed to at last 16 bits so that ether_addr_copy can be safely used
on them.

buf->data is of type ieee80211_cts which is already properly aligned.

Signed-off-by: Krzysztof Adamski <k@japko.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Use ether_addr_copy() in vnt_fill_ieee80211_rts.

Both struct ieee80211_rts and struct ieee80211_hdr defined in
linux/ieee80211.h are declared as __aligned(2) so it is safe to use
ether_addr_copy() instead of memcpy().

Signed-off-by: Krzysztof Adamski <k@japko.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Declare vnt_init() static

Fix sparse warning:
  drivers/staging/vt6655/device_main.c:1672:5: warning: symbol 'vnt_init' was not declared. Should it be static?

Signed-off-by: Sören Brinkmann <soeren.brinkmann@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>