po-tchen [Fri, 22 May 2020 03:46:34 +0000 (11:46 +0800)]
drm/amd/display: Passing initial SDP deadline to dmub
[Why]
The SDP deadline indicate the vertical time to send CRC
infopacket in PSR.
Signed-off-by: po-tchen <po-ting.chen@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Martin Tsai [Fri, 22 May 2020 07:50:11 +0000 (15:50 +0800)]
drm/amd/display: Force delay after DP receive power up
[Why]
Some sprcified monitor scalar cannot recognize timing
change on demand. Once the link phy disable and enable
during a short period then the Sink protection mechanism
could keep the screen in blank and cannot be recoverred.
[How]
To add 100ms delay between enable link phy and link training.
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Mon, 25 May 2020 04:02:07 +0000 (00:02 -0400)]
drm/amd/display: 3.2.88
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Fri, 22 May 2020 21:48:23 +0000 (17:48 -0400)]
drm/amd/display: [FW Promotion] Release 1.0.14
[Header Changes]
- Add SDP transmission deadline for PSR config cmd
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Fri, 22 May 2020 15:29:36 +0000 (11:29 -0400)]
drm/amd/display: update audio wall clock programming
[why]
for audio on real TV issue.
[how]
-add wall clock programming for DPREF based when
Pixel clock is done by DP DTO.
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Fri, 22 May 2020 17:24:06 +0000 (13:24 -0400)]
drm/amd/display: Fix VBA chroma calculation for pipe splitting
[Why]
DML failures occur for 420 modes with dynamic pipe
splitting enabled because the ChromaViewport exceeds
the ChromaSurfaceWidth.
This is caused by adding the viewport_width instead
of the viewport_width_c.
This similarly occurs for rotated modes due to the
use of viewport_height instead of viewport_height_c.
[How]
Correct the calculations.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hugo Hu [Wed, 20 May 2020 04:31:19 +0000 (12:31 +0800)]
drm/amd/display: Revert "enable plane if plane_status changed"
This reverts commmit
fd0293dd5b68a67a8731d54a6b334945e4e95757.
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Wed, 29 Apr 2020 14:54:21 +0000 (10:54 -0400)]
drm/amd/display: Remove unused macro from dcn21
[Why]
SOC_BOUNDING_BOX_VALID is unused and not required for dcn21.
[How]
Remove it.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Thu, 21 May 2020 16:32:45 +0000 (12:32 -0400)]
drm/amd/display: Use u16 for drm_bpp in DSC calculations
[Why]
DSC calculations fail because the u16 bits_per_pixel from
the DRM struct is being casted to the u8 drm_bpp parameters
and locals. Integer wraparound is happening because this
value is greater than 255.
[How]
Use u16 to match what's in the structure instead of u8.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wesley Chalmers [Wed, 20 May 2020 19:32:31 +0000 (15:32 -0400)]
drm/amd/display: Move call to disable DPG
[WHY]
Disabling DPG should happen after setting watermarks and clocks
Signed-off-by: Wesley Chalmers <wchalmer@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Wed, 20 May 2020 14:38:44 +0000 (10:38 -0400)]
drm/amd/display: [FW Promotion] Release 1.0.13
[Header Changes]
- Version bump to 1.0.13
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michael Strauss [Fri, 8 May 2020 17:04:23 +0000 (13:04 -0400)]
drm/amd/display: Fix incorrect dcn1 bandwidth calculations
[WHY]
Typos cause bandwidth calculation errors, one
of which can cause infinite loop on dcn1 with eDP
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rodrigo Siqueira [Wed, 29 Apr 2020 14:53:02 +0000 (10:53 -0400)]
drm/amd/display: Rework dsc to isolate FPU operations
When we want to use float point operation on Linux
we need to use within special kernel protection
(`kernel_fpu_{begin,end}()`.), otherwise the kernel
can clobber userspace FPU register state. For detecting
these issues we use a tool named objtool (with -Ffa
flags) to highlight the FPU problems, all warnings can
be summed up as follows:
./tools/objtool/objtool check -Ffa
drivers/gpu/drm/amd/display/dc/dml/dml_common_defs.o
[..] dc/dsc/rc_calc.o: warning: objtool: get_qp_set()+0x2f8:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: dsc_roundf()+0x5:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: dsc_ceil()+0x5:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: get_ofs_set()+0x3eb:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: calc_rc_params()+0x3c:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/dc_dsc.o: warning: objtool:
get_dsc_bandwidth_range.isra.0()+0x8d:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/dc_dsc.o: warning: objtool: setup_dsc_config()+0x2ef:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc_dpi.o: warning: objtool:copy_pps_fields()+0xbb:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc_dpi.o: warning: objtool:
dscc_compute_dsc_parameters()+0x7b:
FPU instruction outside of kernel_fpu_{begin,end}()
This commit fixes the above issues by rework DSC as described:
1. Isolate all FPU operations in a single file;
2. Use FPU flags only in the file that handles FPU operations;
3. Isolate all functions that require float point operation in static
functions;
4. Add a mid-layer function that does not use any float point operation,
and that could be safely invoked in other parts of the code.
5. Keep float point operation under DC_FP_{START/END} macro.
CC: Christian König <christian.koenig@amd.com>
CC: Alexander Deucher <Alexander.Deucher@amd.com>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Tony Cheng <tony.cheng@amd.com>
CC: Harry Wentland <hwentlan@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Tue, 19 May 2020 19:35:58 +0000 (15:35 -0400)]
drm/amd/display: correct alpha_en programming for new pixel format
[why]
for following new format, no alpha
SURFACE_PIXEL_FORMAT_GRPH_RGB111110_FLOAT/_FIX:
SURFACE_PIXEL_FORMAT_GRPH_BGR101111_FLOAT/_FIX
same as case SURFACE_PIXEL_FORMAT_GRPH_ARGB1555:
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Thu, 11 Jun 2020 11:54:13 +0000 (07:54 -0400)]
drm/amd/amdgpu: Add SQ_DEBUG_STS_GLOBAL* registers/bits
Even though they are technically MMIO registers I put the bits with the sqind block
for organizational purposes.
Requested for UMR debugging.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Wed, 10 Jun 2020 16:10:20 +0000 (12:10 -0400)]
drm/amdgpu/jpeg: fix race condition issue for jpeg start
Fix race condition issue when multiple jpeg starts are called.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Emily Deng [Thu, 11 Jun 2020 06:09:16 +0000 (14:09 +0800)]
drm/amdgpu/sriov: Need to clear kiq position
As will clear vf fw during unload driver, to avoid idle fail. Need
to clear KIQ portion also.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Ack-by: Monk.liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Emily Deng [Thu, 11 Jun 2020 03:40:05 +0000 (11:40 +0800)]
drm/amdgpu/sriov: Disable pm for multiple vf sriov
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Ack-by: Monk.liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Emily Deng [Thu, 11 Jun 2020 03:36:04 +0000 (11:36 +0800)]
drm/amdgpu/sriov: Add clear vf fw support
Guest VM issue the PSP clear_vf_fw command at 2 points:
1.On VF driver loading, after VF message PSP to setup rings,
the next command is “clear_vf_fw”
2.On VF driver unload before VF message to
destroy rings
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Ack-by: Monk.liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prike.Liang [Fri, 5 Jun 2020 09:53:56 +0000 (17:53 +0800)]
drm/amdgpu: fix the nullptr issue as for PWR IP not existing in discovery table
Fixes:
c1cf79ca5ced46 ("drm/amdgpu: use IP discovery table for renoir")
This nullptr issue should be specific on the Renoir series during try access the PWR_MISC_CNTL_STATUS
when PWR IP not been detected by discovery table. Moreover the PWR IP not existing in Renoir series is
expected therefore just avoid access PWR register in Renoir series.
Signed-off-by: Prike.Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sandeep Raghuraman [Wed, 10 Jun 2020 20:06:26 +0000 (01:36 +0530)]
drm/amdgpu: Replace invalid device ID with a valid device ID
Initializes Powertune data for a specific Hawaii card by fixing what
looks like a typo in the code. The device ID 66B1 is not a supported
device ID for this driver, and is not mentioned elsewhere. 67B1 is a
valid device ID, and is a Hawaii Pro GPU.
I have tested on my R9 390 which has device ID 67B1, and it works
fine without problems.
Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dan Carpenter [Wed, 10 Jun 2020 08:56:53 +0000 (11:56 +0300)]
drm/amdgpu: Fix a buffer overflow handling the serial number
The comments say that the serial number is a 16-digit HEX string so the
buffer needs to be at least 17 characters to hold the NUL terminator.
The other issue is that "size" returned from sprintf() is the number of
characters before the NUL terminator so the memcpy() wasn't copying the
terminator. The serial number needs to be NUL terminated so that it
doesn't lead to a read overflow in amdgpu_device_get_serial_number().
Also it's just cleaner and faster to sprintf() directly to adev->serial[]
instead of using a temporary buffer.
Fixes:
81a16241114b ("drm/amdgpu: Add unique_id and serial_number for Arcturus v3")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Evan Quan [Tue, 9 Jun 2020 04:25:07 +0000 (12:25 +0800)]
drm/amd/powerplay: maximum code sharing on sensor reading
Move the common code to amdgpu_smu.c instead of having one
copy in both smu_v11_0.c and smu_v12_0.c.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 9 Jun 2020 04:16:56 +0000 (12:16 +0800)]
drm/amd/powerplay: revise the calling chain on sensor reading
Update the calling chain from "amdgpu_smu.c -> ${asic}_ppt.c ->
smu_v11/12_0.c -> amdgpu_smu.c (smu_common_read_sensor())" to "
"amdgpu_smu.c -> ${asic}_ppt.c -> smu_v11/12_0.c". This can help
to maintain clear code layers. More similar changes will be coming.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 9 Jun 2020 04:03:58 +0000 (12:03 +0800)]
drm/amd/powerplay: drop unnecessary SMU_MSG_GetDpmClockFreq check
Since SMU_MSG_GetDpmClockFreq is known to be supported for Vega20
and before ASICs only. For those ASICs supporting swSMU, it is not
supported.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 8 Jun 2020 11:49:08 +0000 (19:49 +0800)]
drm/amd/powerplay: drop unnecessary wrapper .populate_smc_tables
Since .populate_smc_tables is just a wrapper of .set_default_dpm_table.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 8 Jun 2020 11:31:03 +0000 (19:31 +0800)]
drm/amd/powerplay: drop redundant .set_min_dcefclk_deep_sleep API (v2)
It has exactly the same functionality as .set_deep_sleep_dcefclk.
V2: correct the macro name for better trace
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Colton Lewis [Tue, 9 Jun 2020 00:39:15 +0000 (00:39 +0000)]
drm/amd: correct trivial kernel-doc inconsistencies
Silence documentation warnings by correcting kernel-doc comments.
./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:3388: warning: Excess function parameter 'suspend' description in 'amdgpu_device_suspend'
./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:3485: warning: Excess function parameter 'resume' description in 'amdgpu_device_resume'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:418: warning: Excess function parameter 'tbo' description in 'amdgpu_vram_mgr_del'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:418: warning: Excess function parameter 'place' description in 'amdgpu_vram_mgr_del'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:279: warning: Excess function parameter 'tbo' description in 'amdgpu_gtt_mgr_del'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:279: warning: Excess function parameter 'place' description in 'amdgpu_gtt_mgr_del'
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:332: warning: Function parameter or member 'hdcp_workqueue' not described in 'amdgpu_display_manager'
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:332: warning: Function parameter or member 'cached_dc_state' not described in 'amdgpu_display_manager'
Signed-off-by: Colton Lewis <colton.w.lewis@protonmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Tue, 9 Jun 2020 11:49:59 +0000 (07:49 -0400)]
drm/amd/amdgpu: Add SQ debug registers to GFX9/GFX10 headers (v2)
Requested for UMR support.
(v2): Also add reg/bits for gfx9 headers
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Liu ChengZhe [Tue, 9 Jun 2020 08:44:43 +0000 (16:44 +0800)]
drm/amd/amdgpu: handle return value of amdgpu_driver_load_kms
if guest driver failed to enter full GPU access, amdgpu_driver_load_kms
will unload kms and free dev->dev_private, drm_dev_register would access
null pointer. Driver will enter an error state and can't be unloaded.
Signed-off-by: Liu ChengZhe <ChengZhe.Liu@amd.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 8 Jun 2020 10:04:42 +0000 (18:04 +0800)]
drm/amd/powerplay: move maximum sustainable clock retrieving to .hw_init
Since DAL settings come between .hw_init and .late_init of SMU. And
DAL needs to know the maximum sustainable clocks.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reported-and-Tested-by: Flora Cui <flora.cui@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 8 Jun 2020 10:33:38 +0000 (18:33 +0800)]
drm/amd/powerplay: add check for power limit OD support
Before counting the OD percent into max power limit margin.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 8 Jun 2020 09:33:03 +0000 (17:33 +0800)]
drm/amd/powerplay: correct power limit retrieving based on current power source
Instead of hard coding it as SMU_POWER_SOURCE_AC.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 8 Jun 2020 09:04:04 +0000 (17:04 +0800)]
drm/amd/powerplay: drop unused code around power limit
Drop unused APIs, variables and argument.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 8 Jun 2020 08:47:59 +0000 (16:47 +0800)]
drm/amd/powerplay: simplify the code around setting power limit
Use the cached max/current power limit and move the input check
to the top layer.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 8 Jun 2020 08:41:16 +0000 (16:41 +0800)]
drm/amd/powerplay: simplify the code around retrieving power limit
Use the cached max/current power limit for other cases except
.late_init.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 8 Jun 2020 08:29:41 +0000 (16:29 +0800)]
drm/amd/powerplay: maximize code sharing around power limit
Also cache the current and max power limits.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 8 Jun 2020 06:34:50 +0000 (14:34 +0800)]
drm/amd/powerplay: drop unnecessary get_pptable_power_limit wrappers
Minor code cleanup.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 5 Jun 2020 10:28:58 +0000 (18:28 +0800)]
drm/amd/powerplay: correct the APIs' naming
'UVD' is a HW engine name for Vega20 and before ASICs.
For newer ASICs, the similar engine is named as 'VCN'.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 5 Jun 2020 10:09:47 +0000 (18:09 +0800)]
drm/amd/powerplay: drop unnecessary wrappers
These APIs are used in amdgpu_smu.c only. Thus these wrappers
are unnecessary.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 5 Jun 2020 10:02:31 +0000 (18:02 +0800)]
drm/amd/powerplay: drop dead vce powergate code
This was for Vega20. However Vega20 support is
already dropped from current swSMU.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 5 Jun 2020 09:52:51 +0000 (17:52 +0800)]
drm/amd/powerplay: add error messages on some critical paths
Helpful for error diagnostic.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 5 Jun 2020 07:37:16 +0000 (15:37 +0800)]
drm/amd/powerplay: forbid to use pr_err/warn/info/debug
Use dev_err/warn/info/dbg instead. They are more MGPU friendly.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 5 Jun 2020 07:27:57 +0000 (15:27 +0800)]
drm/amd/powerplay: use MGPU friendly err/warn/info/dbg messages
Use dev_err/warn/info/dbg instead of pr_err/warn/info/debug.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prike.Liang [Mon, 8 Jun 2020 07:20:56 +0000 (15:20 +0800)]
drm/amdgpu/soc15: fix nullptr issue in soc15_read_register() for reg base accessing
The failed case is no SDMA1 IP for Renoir discovery table while in accessing SDMA1 reg base,
thus need have nullptr test for soc15_read_register invoked in MMR addres space inquire opt.
Signed-off-by: Prike.Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dan Carpenter [Mon, 8 Jun 2020 14:16:57 +0000 (17:16 +0300)]
drm/amd/display: Fix indenting in dcn30_set_output_transfer_func()
These lines are a part of the if statement and they are supposed to
be indented one more tab.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Denis Efremov [Fri, 5 Jun 2020 17:37:44 +0000 (20:37 +0300)]
drm/amd/display: Use kfree() to free rgb_user in calculate_user_regamma_ramp()
Use kfree() instead of kvfree() to free rgb_user in
calculate_user_regamma_ramp() because the memory is allocated with
kcalloc().
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Denis Efremov [Fri, 5 Jun 2020 17:37:43 +0000 (20:37 +0300)]
drm/amd/display: Use kvfree() to free coeff in build_regamma()
Use kvfree() instead of kfree() to free coeff in build_regamma()
because the memory is allocated with kvzalloc().
Fixes:
e752058b8671 ("drm/amd/display: Optimize gamma calculations")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 8 Jun 2020 19:39:33 +0000 (15:39 -0400)]
drm/amdgpu: skip BAR resizing if the bios already did it
No need to do it again.
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 4 Jun 2020 08:27:13 +0000 (16:27 +0800)]
drm/amd/powerplay: use the same interval as PMFW on retrieving metrics table
Current 100ms interval makes no sense. User gets outdated
data due to this.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 4 Jun 2020 10:28:34 +0000 (18:28 +0800)]
drm/amd/powerplay: update how to use metrics table on Sienna Cichlid
Retrieve only those data interested instead of the whole table.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 4 Jun 2020 07:37:22 +0000 (15:37 +0800)]
drm/amd/powerplay: update how to use metrics table on Navi10
Retrieve only those data interested instead of the whole table.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 2 Jun 2020 09:48:11 +0000 (17:48 +0800)]
drm/amd/powerplay: update how to use metrics table on Arcturus
Retrieve only those interested metrics data instead of the whole
metrics table. By this, the memory copy can be dropped.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Flora Cui [Fri, 5 Jun 2020 07:12:24 +0000 (15:12 +0800)]
drm/amd/display: drop duplicated .dsc_pg_control for dcn30
There're 2 .dsc_pg_control, drop the first one.
.dsc_pg_control = NULL,
.dsc_pg_control = dcn20_dsc_pg_control,
Signed-off-by: Flora Cui <flora.cui@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Flora Cui [Fri, 5 Jun 2020 06:13:26 +0000 (14:13 +0800)]
drm/amd/display: drop duplicated structure
struct gpu_info_voltage_scaling_v1_0 & gpu_info_soc_bounding_box_v1_0 is
defined in amdgpu_socbb.h
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Wed, 3 Jun 2020 04:33:18 +0000 (12:33 +0800)]
drm/amd/powerplay: update driver if file for sienna_cichlid
Update sienna_cichlid driver if header file to match pptable changes.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Tue, 2 Jun 2020 09:15:20 +0000 (17:15 +0800)]
drm/amd/powerplay: update powerplay table for sienna_cichlid
Update powerplay table for sienna_cichlid, add set_thermal_range and
get_max_power_limit function for sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Tue, 2 Jun 2020 09:11:58 +0000 (17:11 +0800)]
drm/amd/powerplay: add smu v11_0_7 pptable
Add smu_v11_0_7_pptable.h for sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Tue, 2 Jun 2020 08:29:08 +0000 (16:29 +0800)]
drm/amd/powerplay: move powerplay table operation out of smu_v11_0.c
move smu_v11_0_get_max_power_limit and smu_v11_0_set_thermal_range
function from smu_v11_0.c to asic specific _ppt.c to avoid powerplay
table conflict with different ASIC with smu11.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stanley.Yang [Thu, 14 May 2020 08:44:42 +0000 (16:44 +0800)]
drm/amdgpu: support reserve bad page for virt (v3)
v1: rename some functions name, only init ras error handler data for
supported asic.
v2: fix potential memory leak.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 3 Jun 2020 03:45:49 +0000 (11:45 +0800)]
drm/amd/powerplay: use work queue to perform throttling logging
As IO operations(access to SMU internals) and possible sleep are
involved in throttling logging. Workqueue can handle them well.
Otherwise we may hit "scheduling while atomic" error.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 1 Jun 2020 10:31:20 +0000 (18:31 +0800)]
drm/amd/powerplay: skip BACO feature on DPMs disablement
Instead of disabling and reenabling it later.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 1 Jun 2020 06:03:57 +0000 (14:03 +0800)]
drm/amd/powerplay: add firmware cleanup on sw_fini
To avoid possible memory leak.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 1 Jun 2020 05:08:56 +0000 (13:08 +0800)]
drm/amd/powerplay: move amdgpu_irq_src to the smu structure allocation
Rather than allocating it dynamically at runtime considering it is only
several bytes in size.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 4 Jun 2020 04:00:11 +0000 (12:00 +0800)]
drm/amd/powerplay: maximize code sharing between .hw_fini and .suspend
Thus redundant code can be dropped.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 4 Jun 2020 03:50:39 +0000 (11:50 +0800)]
drm/amd/powerplay: better namings
And some minor changes as dropping unused parameter and label
internal used API as static.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 4 Jun 2020 03:42:08 +0000 (11:42 +0800)]
drm/amd/powerplay: sort those operations performed in hw setup
Those common operations(for all ASICs) are placed first and followed
by ASIC specific ones. While the display related are placed at the last.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 4 Jun 2020 03:35:45 +0000 (11:35 +0800)]
drm/amd/powerplay: maximize code sharing between .hw_init and .resume
Then redundant code can be dropped.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 4 Jun 2020 03:25:28 +0000 (11:25 +0800)]
drm/amd/powerplay: move those operations not needed for resume out
Since smu_smc_table_hw_init() is needed for both .hw_init and .resume.
By doing this, we can drop unnecessary operations on resume.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 4 Jun 2020 03:15:12 +0000 (11:15 +0800)]
drm/amd/powerplay: postpone operations not required for hw setup to late_init
So that we do not need to perform those unnecessary operations again on
resume.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 29 May 2020 06:07:41 +0000 (14:07 +0800)]
drm/amd/powerplay: clean up the overdrive settings
Eliminate the buffer allocation and drop the unnecessary
overdrive table uploading.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 28 May 2020 10:50:00 +0000 (18:50 +0800)]
drm/amd/powerplay: clean up the APIs for pptable setup
Combine and simplify the logics for setup pptable.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 28 May 2020 10:41:28 +0000 (18:41 +0800)]
drm/amd/powerplay: clean up the APIs for bootup clocks
Combine and simplify the logics for retrieving bootup
clocks.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 28 May 2020 08:55:08 +0000 (16:55 +0800)]
drm/amd/powerplay: centralize all buffer allocation in sw_init phase
To fit common design. And this can simplify the buffer deallocation.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 3 Jun 2020 10:09:01 +0000 (18:09 +0800)]
drm/amd/powerplay: implement a common API for dpms disablement
So that code can be shared between .hw_fini and .suspend.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 3 Jun 2020 10:06:02 +0000 (18:06 +0800)]
drm/amd/powerplay: drop unused APIs and unnecessary checks
Minor code cleanups.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 8 Jun 2020 22:05:34 +0000 (18:05 -0400)]
drm/amd/powerplay: eliminate asic type check
The macros check if the asic has the callback.
So no need to explicitly check.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Colin Ian King [Thu, 4 Jun 2020 10:35:44 +0000 (11:35 +0100)]
drm/amd/display: fix spelling mistake: "propogation" -> "propagation"
There is a spelling mistake in a dml_print message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 2 Jun 2020 21:22:48 +0000 (17:22 -0400)]
drm/amdgpu/display: use blanked rather than plane state for sync groups
We may end up with no planes set yet, depending on the ordering, but we
should have the proper blanking state which is either handled by either
DPG or TG depending on the hardware generation. Check both to determine
the proper blanked state.
Bug: https://gitlab.freedesktop.org/drm/amd/issues/781
Fixes:
5fc0cbfad45648 ("drm/amd/display: determine if a pipe is synced by plane state")
Cc: nicholas.kazlauskas@amd.com
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Wed, 3 Jun 2020 00:42:33 +0000 (20:42 -0400)]
drm/amd/display: Revalidate bandwidth before commiting DC updates
[Why]
Whenever we switch between tiled formats without also switching pixel
formats or doing anything else that recreates the DC plane state we
can run into underflow or hangs since we're not updating the
DML parameters before committing to the hardware.
[How]
If the update type is FULL then call validate_bandwidth again to update
the DML parmeters before committing the state.
This is basically just a workaround and protective measure against
update types being added DC where we could run into this issue in
the future.
We can only fully validate the state in advance before applying it to
the hardware if we recreate all the plane and stream states since
we can't modify what's currently in use.
The next step is to update DM to ensure that we're creating the plane
and stream states for whatever could potentially be a full update in
DC to pre-emptively recreate the state for DC global validation.
The workaround can stay until this has been fixed in DM.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 2 Jun 2020 18:51:36 +0000 (14:51 -0400)]
drm/amdgpu/fence: use the no_scheduler flag
Rather than checking the ring type manually. We already set
this for MES and KIQ (and a few other special cases).
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 2 Jun 2020 19:08:39 +0000 (15:08 -0400)]
Revert "drm/[radeon|amdgpu]: Replace one-element array and use struct_size() helper"
This reverts commit
4541ea81edde6ce9a1d9be082489aca7e8e7e1dc.
This changes structs used by the hardware and breaks dpm on some cards.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Wed, 3 Jun 2020 13:32:10 +0000 (09:32 -0400)]
drm/amd/display: Only actually breakpoint if DEBUG_KERNEL_DC is enabled
To match previous behavior and to not hang the kernel if someone
accidentally builds with KGDB enabled.
Fixes:
1aad7078191116f ("drm/amd/display: Make BREAK_TO_DEBUGGER() a debug print")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Mon, 1 Jun 2020 02:51:34 +0000 (10:51 +0800)]
drm/amd/powerplay: use existed smu_dpm_set* interfaces to implement powergate functions
Abstract powergate_vcn/jpeg functions, using smu_dpm_set* to implement it.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tianci.Yin [Wed, 3 Jun 2020 02:05:22 +0000 (10:05 +0800)]
drm/amdgpu: temporarily read bounding box from gpu_info fw for navi12
The bounding box is still needed by Navi12, temporarily read it from gpu_info
firmware. Should be droped when DAL no longer needs it.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhawanpreet Lakha [Thu, 21 May 2020 16:57:54 +0000 (12:57 -0400)]
drm/amd/display: Add DCN3 to Kconfig
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhawanpreet Lakha [Mon, 25 May 2020 17:18:16 +0000 (13:18 -0400)]
drm/amd/display: Add DCN3 blocks to Makefile
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 3 Jun 2020 17:59:16 +0000 (13:59 -0400)]
drm/amdgpu/display: fix build without CONFIG_DRM_AMD_DC_DCN3_0
Need to guard some new DCN3.0 stuff.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dmytro Laktyushkin [Mon, 27 Apr 2020 18:55:08 +0000 (14:55 -0400)]
drm/amd/display: fix and simplify pipe split logic for DCN3
This was done already done for other DCN blocks.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhawanpreet Lakha [Thu, 21 May 2020 16:57:27 +0000 (12:57 -0400)]
drm/amdgpu: Enable DM block for DCN3
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhawanpreet Lakha [Thu, 21 May 2020 19:35:27 +0000 (15:35 -0400)]
drm/amd/display: Remove Unused Registers
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhawanpreet Lakha [Thu, 21 May 2020 17:00:08 +0000 (13:00 -0400)]
drm/amd/display: Handle RGBE_ALPHA Pixel Format
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhawanpreet Lakha [Mon, 25 May 2020 16:44:21 +0000 (12:44 -0400)]
drm/amd/display: Init function tables for DCN3
Initilize function tables for hw programing
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhawanpreet Lakha [Mon, 25 May 2020 17:15:04 +0000 (13:15 -0400)]
drm/amd/display: Add DCN3 VPG
Video Package generator.
used to prepare avi info, DP info etc
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhawanpreet Lakha [Thu, 21 May 2020 16:56:17 +0000 (12:56 -0400)]
drm/amd/display: Add DCN3 AFMT
Audio formating
Audio related code for setup/control
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhawanpreet Lakha [Thu, 21 May 2020 16:58:56 +0000 (12:58 -0400)]
drm/amd/display: Add DCN3 Command Table Helpers
-Handle DCN3 cases for bios parser and command tables
-Add command function tables for DCN3
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhawanpreet Lakha [Thu, 21 May 2020 16:51:51 +0000 (12:51 -0400)]
drm/amd/display: Add DCN3 Resource
Add support for managing resources for DCN3
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhawanpreet Lakha [Thu, 21 May 2020 16:48:41 +0000 (12:48 -0400)]
drm/amd/display: Add DCN3 Support in DM (v2)
Handle DCN3 in amdgpu_dm
v2: fix num_pkrs handling
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhawanpreet Lakha [Thu, 21 May 2020 16:45:45 +0000 (12:45 -0400)]
drm/amd/display: Add DCN3 HWSEQ
Add HW sequence programing for DCN3
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhawanpreet Lakha [Fri, 29 May 2020 19:06:16 +0000 (15:06 -0400)]
drm/amd/display: Add DCN3 DMUB
DMUB (Display Micro-Controller Unit)
Used to read/write regs
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>