ui: egl: Replace fprintf with error_report

Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: c880920f6e40a506394d89dbbe1f67c63d359c17.1463588606.git.crobinso@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Thu 02 Jun 2016 07:23:18 BST using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request: (31 commits)
  Add ENET device to i.MX6 SOC.
  Add ENET/Gbps Ethernet support to FEC device
  i.MX: move FEC device to a register array structure.
  i.MX: Rename i.MX FEC defines to ENET_XXX
  i.MX: reset TX/RX descriptors when FEC is disabled.
  i.MX: Fix FEC code for ECR register reset value.
  i.MX: Fix FEC code for MDIO address selection
  i.MX: Fix FEC code for MDIO operation selection
  net: handle optional VLAN header in checksum computation.
  net: improve UDP/TCP checksum computation.
  e1000e: Introduce qtest for e1000e device
  net: Introduce e1000e device emulation
  e1000: Move out code that will be reused in e1000e
  e1000_regs: Add definitions for Intel 82574-specific bits
  vmxnet3: Use pci_dma_* API instead of cpu_physical_memory_*
  net_pkt: Extend packet abstraction as required by e1000e functionality
  rtl8139: Move more TCP definitions to common header
  net_pkt: Name vmxnet3 packet abstractions more generic
  vmxnet3: Use common MAC address tracing macros
  net: Add macros for MAC address tracing
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/famz/tags/pull-docker-20160601' into staging

v2: Fix warning due to include.
    Various temp dir/file changes.
    Don't use "find -executable" to be compatible with Mac.

# gpg: Signature made Wed 01 Jun 2016 10:30:33 BST using RSA key ID 6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021  AD56 CA35 624C 6A91 71C6

* remotes/famz/tags/pull-docker-20160601:
  .gitignore: Ignore docker source copy
  MAINTAINERS: Add tests/docker
  docker: Add EXTRA_CONFIGURE_OPTS
  docs: Add text for tests/docker in build-system.txt
  docker: Add travis tool
  docker: Add mingw test
  docker: Add clang test
  docker: Add full test
  docker: Add quick test
  docker: Add common.rc
  docker: Add test runner
  docker: Add images
  Makefile: Rules for docker testing
  Makefile: Always include rules.mak
  rules.mak: Add "COMMA" constant
  tests: Add utilities for docker testing

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Add ENET device to i.MX6 SOC.

This adds the ENET device to the i.MX6 SOC.

This was tested by booting Linux on an Qemu i.MX6 instance and accessing
the internet from the linux guest.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Add ENET/Gbps Ethernet support to FEC device

The ENET device (present in i.MX6) is "derived" from FEC and backward
compatible with it.

This patch adds the necessary support of the added feature in the ENET
device to allow Linux to use it (on supported processors).

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>

i.MX: move FEC device to a register array structure.

This is to prepare for the ENET Gb device of the i.MX6.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>

i.MX: Rename i.MX FEC defines to ENET_XXX

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>

i.MX: reset TX/RX descriptors when FEC is disabled.

According to the FEC chapter of i.MX25 reference manual

RX adn TX descriptors are reseted when the FEC device is disabled through ECR.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>

i.MX: Fix FEC code for ECR register reset value.

According to the FEC chapter of i.MX25 reference manual ECR register is
initialized at 0xf0000000 at reset time.

We fix the value.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>

i.MX: Fix FEC code for MDIO address selection

According to the FEC chapter of i.MX25 reference manual

When writing to MMFR register, the MDIO device and adress are selected by
bit 27 to 23 and bit 22 to 18 respectively. This is a total of 10 bits
that need to be used by the Phy chip/address decoding function.

This patch fixes the number of bits used from 9 to 10.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>

i.MX: Fix FEC code for MDIO operation selection

According to the FEC chapter of i.MX25 reference manual

When writing the MMFR register, bit 29 and 28 select the requested operation.
 * 10 means read operation with valid MII mgmt frame
 * 11 means read operation with non compliant MII mgmt frame
 * 01 means write operation with valid MII mgmt frame
 * 00 means write operation with non compliant MII mgmt frame

So while bit 28 does change beween read/write for valid MII mgmt frame, the
mening is inverted for non compliant MII mgmt frame.

Bit 29 on the other hand means read/write whatever the type of mgmt frame
involved.

So this patch change the operation selection from bit 28 to bit 29 as it is
more generic.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>

net: handle optional VLAN header in checksum computation.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>

net: improve UDP/TCP checksum computation.

 * based on Eth, UDP, TCP struct present in eth.h instead of hardcoded
   indexes and sizes.
 * based on various macros present in eth.h.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>

e1000e: Introduce qtest for e1000e device

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

net: Introduce e1000e device emulation

This patch introduces emulation for the Intel 82574 adapter, AKA e1000e.

This implementation is derived from the e1000 emulation code, and
utilizes the TX/RX packet abstractions that were initially developed for
the vmxnet3 device. Although some parts of the introduced code may be
shared with e1000, the differences are substantial enough so that the
only shared resources for the two devices are the definitions in
hw/net/e1000_regs.h.

Similarly to vmxnet3, the new device uses virtio headers for task
offloads (for backends that support virtio extensions). Usage of
virtio headers may be forcibly disabled via a boolean device property
"vnet" (which is enabled by default). In such case task offloads
will be performed in software, in the same way it is done on
backends that do not support virtio headers.

The device code is split into two parts:

  1. hw/net/e1000e.c: QEMU-specific code for a network device;
  2. hw/net/e1000e_core.[hc]: Device emulation according to the spec.

The new device name is e1000e.

Intel specifications for the 82574 controller are available at:
http://www.intel.com/content/dam/doc/datasheet/82574l-gbe-controller-datasheet.pdf

Throughput measurement results (iperf2):

                Fedora 22 guest, TCP, RX
    4 ++------------------------------------------+
      |                                           |
      |                           X   X   X   X   X
  3.5 ++          X   X   X   X                   |
      |       X                                   |
      |                                           |
    3 ++                                          |
G     |   X                                       |
b     |                                           |
/ 2.5 ++                                          |
s     |                                           |
      |                                           |
    2 ++                                          |
      |                                           |
      |                                           |
  1.5 X+                                          |
      |                                           |
      +   +   +   +   +   +   +   +   +   +   +   +
    1 ++--+---+---+---+---+---+---+---+---+---+---+
     32  64  128 256 512  1   2   4   8  16  32  64
      B   B   B   B   B   KB  KB  KB  KB KB  KB  KB
                       Buffer size

               Fedora 22 guest, TCP, TX
  18 ++-------------------------------------------+
     |                        X                   |
  16 ++                           X   X   X   X   X
     |                   X                        |
  14 ++                                           |
     |                                            |
  12 ++                                           |
G    |               X                            |
b 10 ++                                           |
/    |                                            |
s  8 ++                                           |
     |                                            |
   6 ++          X                                |
     |                                            |
   4 ++                                           |
     |       X                                    |
   2 ++  X                                        |
     X   +   +   +   +   +    +   +   +   +   +   +
   0 ++--+---+---+---+---+----+---+---+---+---+---+
    32  64  128 256 512  1    2   4   8  16  32  64
     B   B   B   B   B   KB   KB  KB  KB KB  KB  KB
                       Buffer size

                Fedora 22 guest, UDP, RX
    3 ++------------------------------------------+
      |                                           X
      |                                           |
  2.5 ++                                          |
      |                                           |
      |                                           |
    2 ++                                 X        |
G     |                                           |
b     |                                           |
/ 1.5 ++                                          |
s     |                         X                 |
      |                                           |
    1 ++                                          |
      |                                           |
      |                 X                         |
  0.5 ++                                          |
      |        X                                  |
      X        +        +       +        +        +
    0 ++-------+--------+-------+--------+--------+
     32       64       128     256      512       1
      B        B         B       B        B      KB
                       Datagram size

                Fedora 22 guest, UDP, TX
    1 ++------------------------------------------+
      |                                           X
  0.9 ++                                          |
      |                                           |
  0.8 ++                                          |
  0.7 ++                                          |
      |                                           |
G 0.6 ++                                          |
b     |                                           |
/ 0.5 ++                                          |
s     |                                  X        |
  0.4 ++                                          |
      |                                           |
  0.3 ++                                          |
  0.2 ++                        X                 |
      |                                           |
  0.1 ++                X                         |
      X        X        +       +        +        +
    0 ++-------+--------+-------+--------+--------+
     32       64       128     256      512       1
      B        B         B       B        B      KB
                       Datagram size

              Windows 2012R2 guest, TCP, RX
  3.2 ++------------------------------------------+
      |                                   X       |
    3 ++                                          |
      |                                           |
  2.8 ++                                          |
      |                                           |
  2.6 ++                              X           |
G     |   X                   X   X           X   X
b 2.4 ++      X       X                           |
/     |                                           |
s 2.2 ++                                          |
      |                                           |
    2 ++                                          |
      |           X       X                       |
  1.8 ++                                          |
      |                                           |
  1.6 X+                                          |
      +   +   +   +   +   +   +   +   +   +   +   +
  1.4 ++--+---+---+---+---+---+---+---+---+---+---+
     32  64  128 256 512  1   2   4   8  16  32  64
      B   B   B   B   B   KB  KB  KB  KB KB  KB  KB
                       Buffer size

             Windows 2012R2 guest, TCP, TX
  14 ++-------------------------------------------+
     |                                            |
     |                                        X   X
  12 ++                                           |
     |                                            |
  10 ++                                           |
     |                                            |
G    |                                            |
b  8 ++                                           |
/    |                                    X       |
s  6 ++                                           |
     |                                            |
     |                                            |
   4 ++                               X           |
     |                                            |
   2 ++                                           |
     |           X   X            X               |
     +   X   X   +   +   X    X   +   +   +   +   +
   0 X+--+---+---+---+---+----+---+---+---+---+---+
    32  64  128 256 512  1    2   4   8  16  32  64
     B   B   B   B   B   KB   KB  KB  KB KB  KB  KB
                       Buffer size

              Windows 2012R2 guest, UDP, RX
  1.6 ++------------------------------------------X
      |                                           |
  1.4 ++                                          |
      |                                           |
  1.2 ++                                          |
      |                                  X        |
      |                                           |
G   1 ++                                          |
b     |                                           |
/ 0.8 ++                                          |
s     |                                           |
  0.6 ++                        X                 |
      |                                           |
  0.4 ++                                          |
      |                 X                         |
      |                                           |
  0.2 ++       X                                  |
      X        +        +       +        +        +
    0 ++-------+--------+-------+--------+--------+
     32       64       128     256      512       1
      B        B         B       B        B      KB
                       Datagram size

              Windows 2012R2 guest, UDP, TX
  0.6 ++------------------------------------------+
      |                                           X
      |                                           |
  0.5 ++                                          |
      |                                           |
      |                                           |
  0.4 ++                                          |
G     |                                           |
b     |                                           |
/ 0.3 ++                                 X        |
s     |                                           |
      |                                           |
  0.2 ++                                          |
      |                                           |
      |                         X                 |
  0.1 ++                                          |
      |                 X                         |
      X        X        +       +        +        +
    0 ++-------+--------+-------+--------+--------+
     32       64       128     256      512       1
      B        B         B       B        B      KB
                       Datagram size

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

e1000: Move out code that will be reused in e1000e

Code that will be shared moved to a separate files.

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

e1000_regs: Add definitions for Intel 82574-specific bits

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

vmxnet3: Use pci_dma_* API instead of cpu_physical_memory_*

To make this device and network packets
abstractions ready for IOMMU.

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

net_pkt: Extend packet abstraction as required by e1000e functionality

This patch extends the TX/RX packet abstractions with features that will
be used by the e1000e device implementation.

Changes are:

  1. Support iovec lists for RX buffers
  2. Deeper RX packets parsing
  3. Loopback option for TX packets
  4. Extended VLAN headers handling
  5. RSS processing for RX packets

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

rtl8139: Move more TCP definitions to common header

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

net_pkt: Name vmxnet3 packet abstractions more generic

This patch drops "vmx" prefix from packet abstractions names
to emphasize the fact they are generic and not tied to any
specific network device.

These abstractions will be reused by e1000e emulation implementation
introduced by following patches so their names need generalization.

This patch (except renamed files, adjusted comments and changes in MAINTAINTERS)
was produced by:

git grep -lz 'vmxnet_tx_pkt' | xargs -0 perl -i'' -pE "s/vmxnet_tx_pkt/net_tx_pkt/g"
git grep -lz 'vmxnet_rx_pkt' | xargs -0 perl -i'' -pE "s/vmxnet_rx_pkt/net_rx_pkt/g"
git grep -lz 'VmxnetTxPkt' | xargs -0 perl -i'' -pE "s/VmxnetTxPkt/NetTxPkt/g"
git grep -lz 'VMXNET_TX_PKT' | xargs -0 perl -i'' -pE "s/VMXNET_TX_PKT/NET_TX_PKT/g"
git grep -lz 'VmxnetRxPkt' | xargs -0 perl -i'' -pE "s/VmxnetRxPkt/NetRxPkt/g"
git grep -lz 'VMXNET_RX_PKT' | xargs -0 perl -i'' -pE "s/VMXNET_RX_PKT/NET_RX_PKT/g"
sed -ie 's/VMXNET_/NET_/g' hw/net/vmxnet_rx_pkt.c
sed -ie 's/VMXNET_/NET_/g' hw/net/vmxnet_tx_pkt.c

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

vmxnet3: Use common MAC address tracing macros

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

net: Add macros for MAC address tracing

These macros will be used by future commits introducing
e1000e device emulation and by vmxnet3 tracing code.

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

net: Introduce Toeplitz hash calculator

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

vmxnet3: Use generic function for DSN capability definition

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

pcie: Introduce function for DSN capability creation

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

pcie: Add support for PCIe CAP v1

Added support for PCIe CAP v1, while reusing some of the existing v2
infrastructure.

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

pci: Introduce define for PM capability version 1.1

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

msix: make msix_clr_pending() visible for clients

This function will be used by e1000e device code.

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

pci: fix unaligned access in pci_xxx_quad()

Replace legacy cpu_to_le64w()/le64_to_cpup()
calls with stq_le_p()/ldq_le_p().

Motivation for this modification is that
follow up patches add utility function
pcie_dev_ser_num_init() for PCIe DSN
capability creation which uses
pci_set_quad() with a misaligned offset.

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

.gitignore: Ignore docker source copy

Signed-off-by: Fam Zheng <famz@redhat.com>

MAINTAINERS: Add tests/docker

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1464755128-32490-16-git-send-email-famz@redhat.com

docker: Add EXTRA_CONFIGURE_OPTS

Whatever passed in this variable will be appended to all
configure commands.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1464755128-32490-15-git-send-email-famz@redhat.com

docs: Add text for tests/docker in build-system.txt

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1464755128-32490-14-git-send-email-famz@redhat.com

docker: Add travis tool

The script is not prefixed with test- so it won't run with "make docker-test",
because it can take too long.

Run it with "make docker-travis@ubuntu".

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1464755128-32490-13-git-send-email-famz@redhat.com

docker: Add mingw test

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1464755128-32490-12-git-send-email-famz@redhat.com

docker: Add clang test

The (currently partially commented out) configure options are suggested
by John Snow <jsnow@redhat.com>.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1464755128-32490-11-git-send-email-famz@redhat.com

docker: Add full test

This builds all available targets.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1464755128-32490-10-git-send-email-famz@redhat.com

docker: Add quick test

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1464755128-32490-9-git-send-email-famz@redhat.com

docker: Add common.rc

"requires" checks the "FEATURE" environment for specified prerequisits,
and skip the execution of test if not found.

"build_qemu" is the central routine to compile QEMU for tests to call.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1464755128-32490-8-git-send-email-famz@redhat.com

docker: Add test runner

It's better to have a launcher for all tests, to make it easier to
initialize and manage the environment.

If "DEBUG=1"  a shell prompt will show up before the test runs.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1464755128-32490-7-git-send-email-famz@redhat.com

docker: Add images

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1464755128-32490-6-git-send-email-famz@redhat.com

Makefile: Rules for docker testing

This adds a group of make targets to run docker tests, all are available
in source tree without running ./configure.

The usage is shown with "make docker".

Besides the fixed ones, dynamic targets for building each image and
running each test in each image are generated automatically by make,
scanning $(SRC_PATH)/tests/docker/ files with specific patterns.

Alternative to manually list particular targets (docker-TEST@IMAGE)
set, you can control which tests/images to run by filtering variables,
TESTS= and IMAGES=, which are expressed in Makefile pattern syntax,
"foo% %bar ...". For example:

    $ make docker-test IMAGES="ubuntu fedora"

Unfortunately, it's impossible to propagate "-j $JOBS" into make in
containers, however since each combination is made a first class target
in the top Makefile, "make -j$N docker-test" still parallels the tests
coarsely.

Still, $J is made a magic variable to let all make invocations in
containers to use -j$J.

Instead of providing a live version of the source tree to the docker
container we snapshot it with git-archive. This ensures the tree is in a
pristine state for whatever operations the container is going to run on
them.

Uncommitted changes known to files known by the git index will be
included in the snapshot if there are any.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1464755128-32490-5-git-send-email-famz@redhat.com

Makefile: Always include rules.mak

When config-host.mak is not found it is safe to assume SRC_PATH is ".".
So, it is okay to move inclusion of ruls.mak out of the ifeq condition.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1464755128-32490-4-git-send-email-famz@redhat.com

rules.mak: Add "COMMA" constant

Using "," literal in $(call quiet-command, ...) arguments is awkward.
Add this constant to make it at least doable.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1464755128-32490-3-git-send-email-famz@redhat.com

tests: Add utilities for docker testing

docker.py is added with a number of useful subcommands to manager docker
images and instances for QEMU docker testing. Subcommands are:

run: A wrapper of "docker run" (or "sudo -n docker run" if necessary),
which takes care of killing and removing the running container at
SIGINT.

clean: Tear down all the containers including inactive ones that are
started by docker_run.

build: Compare an image from given dockerfile and rebuild it if they're
different.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1464755128-32490-2-git-send-email-famz@redhat.com

net/net: Add SocketReadState for reuse codes

This function is from net/socket.c, move it to net.c and net.h.
Add SocketReadState to make others reuse net_fill_rstate().
suggestion from jason.

v4:
 - move 'rs->finalize = finalize' to rs_init()

v3:
 - remove SocketReadState init callback
 - put finalize callback to net_fill_rstate()

v2:
 - rename ReadState to SocketReadState
 - add SocketReadState init and finalize callback

v1:
 - init patch

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

net: vl: Move default_net to vl.c

All handling of defaults (default_* variables) is inside vl.c,
move default_net there too, so we can more easily refactor that
code later.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-20160531' into staging

ppc patch queue for 2016-05-31

Here's another ppc patch queue.  This batch is all preliminaries
towards two significant features:

1) Full hypervisor-mode support for POWER8
    Patches 1-8 start fixing various bugs with TCG's handling of
    hypervisor mode

2) CPU hotplug support
    Patches 9-12 make some preliminary fixes towards implementing CPU
    hotplug on ppc64 (and other non-x86 platforms).  These patches are
    actually to generic code, not ppc, but are included here with
    Paolo's ACK.

# gpg: Signature made Tue 31 May 2016 01:39:44 BST using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.7-20160531:
  cpu: Add a sync version of cpu_remove()
  cpu: Reclaim vCPU objects
  exec: Do vmstate unregistration from cpu_exec_exit()
  exec: Remove cpu from cpus list during cpu_exec_exit()
  ppc: Add PPC_64H instruction flag to POWER7 and POWER8
  ppc: Get out of emulation on SMT "OR" ops
  ppc: Fix sign extension issue in mtmsr(d) emulation
  ppc: Change 'invalid' bit mask of tlbiel and tlbie
  ppc: tlbie, tlbia and tlbisync are HV only
  ppc: Do some batching of TCG tlb flushes
  ppc: Use split I/D mmu modes to avoid flushes on interrupts
  ppc: Remove MMU_MODEn_SUFFIX definitions

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* docs/atomics fixes and atomic_rcu_* optimization (Emilio)
* NBD bugfix (Eric)
* Memory fixes and cleanups (Paolo, Paul)
* scsi-block support for SCSI status, including persistent
  reservations (Paolo)
* kvm_stat moves to the Linux repository
* SCSI bug fixes (Peter, Prasad)
* Killing qemu_char_get_next_serial, non-ARM parts (Xiaoqiang)

# gpg: Signature made Sun 29 May 2016 08:11:20 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream: (30 commits)
  exec: hide mr->ram_addr from qemu_get_ram_ptr users
  memory: split memory_region_from_host from qemu_ram_addr_from_host
  exec: remove ram_addr argument from qemu_ram_block_from_host
  memory: remove qemu_get_ram_fd, qemu_set_ram_fd, qemu_ram_block_host_ptr
  scsi-generic: Merge block max xfer len in INQUIRY response
  scsi-block: always use SG_IO
  scsi-disk: introduce scsi_disk_req_check_error
  scsi-disk: add need_fua_emulation to SCSIDiskClass
  scsi-disk: introduce dma_readv and dma_writev
  scsi-disk: introduce a common base class
  xen-hvm: ignore background I/O sections
  docs/atomics: update comparison with Linux
  atomics: do not emit consume barrier for atomic_rcu_read
  atomics: emit an smp_read_barrier_depends() barrier only for Alpha and Thread Sanitizer
  docs/atomics: update atomic_read/set comparison with Linux
  bt: rewrite csrhci_write to avoid out-of-bounds writes
  block/iscsi: avoid potential overflow of acb->task->cdb
  scsi: megasas: check 'read_queue_head' index value
  scsi: megasas: initialise local configuration data buffer
  scsi: megasas: use appropriate property buffer size
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

cpu: Add a sync version of cpu_remove()

This sync API will be used by the CPU hotplug code to wait for the CPU to
completely get removed before flagging the failure to the device_add
command.

Sync version of this call is needed to correctly recover from CPU
realization failures when ->plug() handler fails.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

cpu: Reclaim vCPU objects

In order to deal well with the kvm vcpus (which can not be removed without any
protection), we do not close KVM vcpu fd, just record and mark it as stopped
into a list, so that we can reuse it for the appending cpu hot-add request if
possible. It is also the approach that kvm guys suggested:
https://www.mail-archive.com/kvm@vger.kernel.org/msg102839.html

Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
               [- Explicit CPU_REMOVE() from qemu_kvm/tcg_destroy_vcpu()
                  isn't needed as it is done from cpu_exec_exit()
                - Use iothread mutex instead of global mutex during
                  destroy
                - Don't cleanup vCPU object from vCPU thread context
                  but leave it to the callers (device_add/device_del)]
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

exec: Do vmstate unregistration from cpu_exec_exit()

cpu_exec_init() does vmstate_register for the CPU device. This needs to be
undone from cpu_exec_exit(). This change is needed to support CPU hot
removal.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[dwg: added missing include to fix compile on some archs]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

exec: Remove cpu from cpus list during cpu_exec_exit()

CPUState *cpu gets added to the cpus list during cpu_exec_init(). It
should be removed from cpu_exec_exit().

cpu_exec_exit() is called from generic CPU::instance_finalize and some
archs like PowerPC call it from CPU unrealizefn. So ensure that we
dequeue the cpu only once.

Now -1 value for cpu->cpu_index indicates that we have already dequeued
the cpu for CONFIG_USER_ONLY case also.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc: Add PPC_64H instruction flag to POWER7 and POWER8

This will enable decoding of hrfid

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc: Get out of emulation on SMT "OR" ops

Otherwise tight loops at smt_low for example, which OPAL does,
eat so much CPU that we can't boot a kernel anymore. With that,
I can boot 8 CPUs just fine with powernv.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc: Fix sign extension issue in mtmsr(d) emulation

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc: Change 'invalid' bit mask of tlbiel and tlbie

Otherwise it will trip on the forms used in recent architecture.

Ideally, we should have different handlers for different architecture
levels but our current implementation of TLB flushing is dumb enough
that this will do for now.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc: tlbie, tlbia and tlbisync are HV only

Not that anything remotely recent supports tlbia but ...

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc: Do some batching of TCG tlb flushes

On ppc64 especially, we flush the tlb on any slbie or tlbie instruction.

However, those instructions often come in bursts of 3 or more (context
switch will favor a series of slbie's for example to an slbia if the
SLB has less than a certain number of entries in it, and tlbie's can
happen in a series, with PAPR, H_BULK_REMOVE can remove up to 4 entries
at a time.

Doing a tlb_flush() each time is a waste of time. We end up doing a memset
of the whole TLB, reloading it for the next instruction, memset'ing again,
etc...

Those instructions don't have to take effect immediately. For slbie, they
can wait for the next context synchronizing event. For tlbie, the next
tlbsync.

This implements batching by keeping a flag that indicates that we have a
TLB in need of flushing. We check it on interrupts, rfi's, isync's and
tlbsync and flush the TLB if needed.

This reduces the number of tlb_flush() on a boot to a ubuntu installer
first dialog screen from roughly 360K down to 36K.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: added a 'CPUPPCState *' variable in h_remove() and
      h_bulk_remove() ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[dwg: removed spurious whitespace change, use 0/1 not true/false
      consistently, since tlb_need_flush has int type]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc: Use split I/D mmu modes to avoid flushes on interrupts

We rework the way the MMU indices are calculated, providing separate
indices for I and D side based on MSR:IR and MSR:DR respectively,
and thus no longer need to flush the TLB on context changes. This also
adds correct support for HV as a separate address space.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc: Remove MMU_MODEn_SUFFIX definitions

We don't use the resulting accessors and this gets in the way of
the split I/D TLB work.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

exec: hide mr->ram_addr from qemu_get_ram_ptr users

Let users of qemu_get_ram_ptr and qemu_ram_ptr_length pass in an
address that is relative to the MemoryRegion.  This basically means
what address_space_translate returns.

Because the semantics of the second parameter change, rename the
function to qemu_map_ram_ptr.

Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

memory: split memory_region_from_host from qemu_ram_addr_from_host

Move the old qemu_ram_addr_from_host to memory_region_from_host and
make it return an offset within the region.  For qemu_ram_addr_from_host
return the ram_addr_t directly, similar to what it was before
commit 1b5ec23 ("memory: return MemoryRegion from qemu_ram_addr_from_host",
2013-07-04).

Reviewed-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

exec: remove ram_addr argument from qemu_ram_block_from_host

Of the two callers, one does not use it, and the other can compute
it itself based on the other output argument (offset) and the RAMBlock.

Reviewed-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

memory: remove qemu_get_ram_fd, qemu_set_ram_fd, qemu_ram_block_host_ptr

Remove direct uses of ram_addr_t and optimize memory_region_{get,set}_fd
now that a MemoryRegion knows its RAMBlock directly.

Reviewed-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

scsi-generic: Merge block max xfer len in INQUIRY response

The rationale is similar to the above mode sense response interception:
this is practically the only channel to communicate restraints from
elsewhere such as host and block driver.

The scsi bus we attach onto can have a larger max xfer len than what is
accepted by the host file system (guarding between the host scsi LUN and
QEMU), in which case the SG_IO we generate would get -EINVAL.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1464243305-10661-3-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

scsi-block: always use SG_IO

Using pread/pwrite or io_submit has the advantage of eliminating the
bounce buffer, but drops the SCSI status.  This keeps the guest from
seeing unit attention codes, as well as statuses such as RESERVATION
CONFLICT.  Because we know scsi-block operates on an SBC device we can
still use the DMA helpers with SG_IO; just remember to patch the CDBs
if the transfer is split into multiple segments.

This means that scsi-block will always use the thread-pool unfortunately,
instead of respecting aio=native.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

scsi-disk: introduce scsi_disk_req_check_error

Commonize all the checks for canceled requests and errors.  The next patch
will add another case to check for, in order to handle passthrough commands.

There is no semantic change here; the only nontrivial modification is in
scsi_write_do_fua, where cancellation has been checked earlier by both
callers.  Thus, the check is replaced with an assertion.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

scsi-disk: add need_fua_emulation to SCSIDiskClass

scsi-block will be able to do FUA just by passing the request through
to the LUN (which is also more efficient); there is no need to emulate
it like we do for scsi-disk.

Add a new method to distinguish this.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

scsi-disk: introduce dma_readv and dma_writev

These are replacements for blk_aio_readv and blk_aio_writev that allow
customization of the data path.  They reuse the DMA helpers' DMAIOFunc
callback type, so that the same function can be used in either the
QEMUSGList or the bounce-buffered case.

This customization will be needed in the next patch to do zero-copy
SG_IO on scsi-block.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

scsi-disk: introduce a common base class

This will be the place to add DMAIOFuncs in the next patch.  There
are also a couple DeviceClass members that can be moved to the
abstract class's initialization function.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

xen-hvm: ignore background I/O sections

Since Xen will correctly handle accesses to unimplemented I/O ports (by
returning all 1's for reads and ignoring writes) there is no need for
QEMU to register backgroud I/O sections.

This patch therefore adds checks to xen_io_add/del so that sections with
memory-region ops pointing at 'unassigned_io_ops' are ignored.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1462811480-16295-1-git-send-email-paul.durrant@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

docs/atomics: update comparison with Linux

Over time, some differences between QEMU and Linux atomics are getting
smoothed.  In particular, Linux grew atomic_fetch_or (and in general
the differences regarding RMW operations were not described accurately)
and smp_load_acquire/smp_store_release.  Also, set_mb was renamed to
smp_store_mb().  Include these changes in the documentation.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

atomics: do not emit consume barrier for atomic_rcu_read

Currently we emit a consume-load in atomic_rcu_read.  Because of
limitations in current compilers, this is overkill for non-Alpha hosts
and it is only useful to make Thread Sanitizer work.

This patch leaves the consume-load in atomic_rcu_read when
compiling with Thread Sanitizer enabled, and resorts to a
relaxed load + smp_read_barrier_depends otherwise.

On an RMO host architecture, such as aarch64, the performance
improvement of this change is easily measurable. For instance,
qht-bench performs an atomic_rcu_read on every lookup. Performance
before and after applying this patch:

$ tests/qht-bench -d 5 -n 1
Before: 9.78 MT/s
After:  10.96 MT/s

Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1464120374-8950-4-git-send-email-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

atomics: emit an smp_read_barrier_depends() barrier only for Alpha and Thread Sanitizer

For correctness, smp_read_barrier_depends() is only required to
emit a barrier on Alpha hosts. However, we are currently emitting
a consume fence unconditionally, and most compilers currently treat
consume and acquire fences as equivalent.

Fix it by keeping the consume fence if we're compiling with Thread
Sanitizer, since this might help prevent false warnings. Otherwise,
only emit the barrier for Alpha hosts. Note that we still guarantee
that smp_read_barrier_depends() is a compiler barrier.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1464120374-8950-3-git-send-email-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

docs/atomics: update atomic_read/set comparison with Linux

Recently Linux did a mass conversion of its atomic_read/set calls
so that they at least are READ/WRITE_ONCE. See Linux's commit
62e8a325 ("atomic, arch: Audit atomic_{read,set}()"). It seems though
that their documentation hasn't been updated to reflect this.

The appended updates our documentation to reflect the change, which
means there is effectively no difference between our atomic_read/set
and the current Linux implementation.

While at it, fix the statement that a barrier is implied by
atomic_read/set, which is incorrect. Volatile/atomic semantics prevent
transformations pertaining the variable they apply to; this, however,
has no effect on surrounding statements like barriers do. For more
details on this, see:
  https://gcc.gnu.org/onlinedocs/gcc/Volatiles.html

Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1464120374-8950-2-git-send-email-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

bt: rewrite csrhci_write to avoid out-of-bounds writes

The usage of INT_MAX in this function confuses Coverity.  I think
the defect is bogus, however there is no protection against
getting more than sizeof(s->inpkt) bytes from the character device
backend.

Rewrite the function to only fill in as much data as needed from
buf into s->inpkt.  The plen variable is replaced by a simple
state machine and there is no need anymore to shift contents to
the beginning of s->inpkt.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

block/iscsi: avoid potential overflow of acb->task->cdb

at least in the path via virtio-blk the maximum size is not
restricted.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1464080368-29584-1-git-send-email-pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

scsi: megasas: check 'read_queue_head' index value

While doing MegaRAID SAS controller command frame lookup, routine
'megasas_lookup_frame' uses 'read_queue_head' value as an index
into 'frames[MEGASAS_MAX_FRAMES=2048]' array. Limit its value
within array bounds to avoid any OOB access.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1464179110-18593-1-git-send-email-ppandit@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

scsi: megasas: initialise local configuration data buffer

When reading MegaRAID SAS controller configuration via MegaRAID
Firmware Interface(MFI) commands, routine megasas_dcmd_cfg_read
uses an uninitialised local data buffer. Initialise this buffer
to avoid stack information leakage.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1464178304-12831-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

scsi: megasas: use appropriate property buffer size

When setting MegaRAID SAS controller properties via MegaRAID
Firmware Interface(MFI) commands, a user supplied size parameter
is used to set property value. Use appropriate size value to avoid
OOB access issues.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1464172291-2856-2-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

scsi: mptsas: infinite loop while fetching requests

The LSI SAS1068 Host Bus Adapter emulator in Qemu, periodically
looks for requests and fetches them. A loop doing that in
mptsas_fetch_requests() could run infinitely if 's->state' was
not operational. Move check to avoid such a loop.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Cc: qemu-stable@nongnu.org
Message-Id: <1464077264-25473-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

scsi: pvscsi: check command descriptor ring buffer size (CVE-2016-4952)

Vmware Paravirtual SCSI emulation uses command descriptors to
process SCSI commands. These descriptors come with their ring
buffers. A guest could set the ring buffer size to an arbitrary
value leading to OOB access issue. Add check to avoid it.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Cc: qemu-stable@nongnu.org
Message-Id: <1464000485-27041-1-git-send-email-ppandit@redhat.com>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm_stat: Remove

The source has moved to the Linux kernel tree.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

nbd: Don't trim unrequested bytes

Similar to commit df7b97ff, we are mishandling clients that
give an unaligned NBD_CMD_TRIM request, and potentially
trimming bytes that occur before their request; which in turn
can cause potential unintended data loss (unlikely in
practice, since most clients are sane and issue aligned trim
requests).  However, while we fixed read and write by switching
to the byte interfaces of blk_, we don't yet have a byte
interface for discard.  On the other hand, trim is advisory, so
rounding the user's request to simply ignore the first and last
unaligned sectors (or the entire request, if it is sub-sector
in length) is just fine.

CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1464173965-9694-1-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hw/char: QOM'ify milkymist-uart.c

drop the qemu_char_get_next_serial and use chardev prop instead

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1464158344-12266-6-git-send-email-zxq_yx_007@163.com>
Tested-by: Michael Walle <michael@walle.cc>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hw/char: QOM'ify lm32_uart.c

* Drop the old SysBus init function and use instance_init
* Call qemu_chr_add_handlers in the realize callback
* Use qdev chardev prop instead of qemu_char_get_next_serial
* Add lm32_uart_create function to create lm32 uart device

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1464158344-12266-5-git-send-email-zxq_yx_007@163.com>
Tested-by: Michael Walle <michael@walle.cc>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hw/char: QOM'ify lm32_juart.c

* Drop the old SysBus init function
* Call qemu_chr_add_handlers in the realize callback
* Use qdev chardev prop instead of qemu_char_get_next_serial

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1464158344-12266-4-git-send-email-zxq_yx_007@163.com>
Tested-by: Michael Walle <michael@walle.cc>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hw/char: QOM'ify etraxfs_ser.c

* Drop the old SysBus init function and use instance_init
* Call qemu_chr_add_handlers in the realize callback
* Use qdev chardev prop instead of qemu_char_get_next_serial
* Add etraxfs_ser_create function to create etraxfs serial device

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1464158344-12266-3-git-send-email-zxq_yx_007@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hw/char: QOM'ify escc.c

* Drop the old SysBus init function and use instance_init
* Call qemu_chr_add_handlers in the realize callback

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1464158344-12266-2-git-send-email-zxq_yx_007@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Revert "memory: Drop FlatRange.romd_mode"

This reverts commit 5b5660adf1fdb61db14ec681b10463b8cba633f1,
as it breaks the UEFI guest firmware (known as ArmVirtPkg or AAVMF)
running in the "virt" machine type of "qemu-system-aarch64":

Contrary to the commit message, (a->mr == b->mr) does *not* imply
that (a->romd_mode == b->romd_mode): the pflash device model calls
memory_region_rom_device_set_romd() -- for switching between the above
modes --, and that function changes mr->romd_mode but the current
AddressSpaceDispatch's FlatRange keeps the old value.  Therefore
region_del/region_add are not called on the KVM MemoryListener.

Reported-by: Drew Jones <drjones@redhat.com>
Tested-by: Drew Jones <drjones@redhat.com>
Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20160527' into staging

linux-user pull request v2 for may 2016

# gpg: Signature made Fri 27 May 2016 12:51:10 BST using RSA key ID DE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg:                 aka "Riku Voipio <riku.voipio@linaro.org>"

* remotes/riku/tags/pull-linux-user-20160527: (38 commits)
  linux-user,target-ppc: fix use of MSR_LE
  linux-user/signal.c: Use s390 target space address instead of host space
  linux-user/signal.c: Use target address instead of host address for microblaze restorer
  linux-user/signal.c: Generate opcode data for restorer in setup_rt_frame
  linux-user: arm: Remove ARM_cpsr and similar #defines
  linux-user: Use direct syscalls for setuid(), etc
  linux-user: x86_64: Don't use 16-bit UIDs
  linux-user: Use g_try_malloc() in do_msgrcv()
  linux-user: Handle msgrcv error case correctly
  linux-user: Handle negative values in timespec conversion
  linux-user: Use safe_syscall for futex syscall
  linux-user: Use safe_syscall for pselect, select syscalls
  linux-user: Use safe_syscall for execve syscall
  linux-user: Use safe_syscall for wait system calls
  linux-user: Use safe_syscall for open and openat system calls
  linux-user: Use safe_syscall for read and write system calls
  linux-user: Provide safe_syscall for fixing races between signals and syscalls
  linux-user: Add debug code to exercise restarting system calls
  linux-user: Support for restarting system calls for Microblaze targets
  linux-user: Set r14 on exit from microblaze syscall
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

linux-user,target-ppc: fix use of MSR_LE

setup_frame()/setup_rt_frame()/restore_user_regs() are using
MSR_LE as the similar kernel functions do: as a bitmask.

But in QEMU, MSR_LE is a bit position, so change this
accordingly.

The previous code was doing nothing as MSR_LE is 0,
and "env->msr &= ~MSR_LE" doesn't change the value of msr.

And yes, a user process can change its endianness,
see linux kernel commit:

    fab5db9 [PATCH] powerpc: Implement support for setting little-endian mode via prctl

and prctl(2): PR_SET_ENDIAN, PR_GET_ENDIAN

Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>

linux-user/signal.c: Use s390 target space address instead of host space

The return address is in target space, so the restorer address needs to
be target space, too.

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>

linux-user/signal.c: Use target address instead of host address for microblaze restorer

The return address is in target space, so the restorer address needs to
be target space, too.

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>

linux-user/signal.c: Generate opcode data for restorer in setup_rt_frame

Original implementation uses do_rt_sigreturn directly in host space,
when a guest program is in unwind procedure in guest space, it will get
an incorrect restore address, then causes unwind failure.

Also cleanup the original incorrect indentation.

Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>

linux-user: arm: Remove ARM_cpsr and similar #defines

The #defines of ARM_cpsr and friends in linux-user/arm/target-syscall.h
can clash with versions in the system headers if building on an
ARM or AArch64 build (though this seems to be dependent on the version
of the system headers). The QEMU defines are not very useful (it's
not clear that they're intended for use with the target_pt_regs struct
rather than (say) the CPUARMState structure) and we only use them in one
function in elfload.c anyway. So just remove the #defines and directly
access regs->uregs[].

Reported-by: Christopher Covington <cov@codeaurora.org>
Tested-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>

linux-user: Use direct syscalls for setuid(), etc

On Linux the setuid(), setgid(), etc system calls have different semantics
from the libc functions. The libc functions follow POSIX and update the
credentials for all threads in the process; the system calls update only
the thread which makes the call. (This impedance mismatch is worked around
in libc by signalling all threads to tell them to do a syscall, in a
byzantine and fragile way; see http://ewontfix.com/17/.)

Since in linux-user we are trying to emulate the system call semantics,
we must implement all these syscalls to directly call the underlying
host syscall, rather than calling the host libc function.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>

linux-user: x86_64: Don't use 16-bit UIDs

The 64-bit x86 syscall ABI uses 32-bit UIDs; only define
USE_UID16 for 32-bit x86.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>