review.tizen.org Git - platform/kernel/linux-rpi.git/log

tracing: Remove obsolete PREEMPTIRQ_EVENTS kconfig option

The PREEMPTIRQ_EVENTS option is unused after commit c3bc8fd637a9 ("tracing:
Centralize preemptirq tracepoints and unify their usage"). Remove it.

Note that this option is hazardous as it stands. It enables TRACE_IRQFLAGS
event on non-preempt configurations without the irqsoff tracer enabled.
TRACE_IRQFLAGS as it stands incurs significant overhead on each IRQ
entry/exit. This is because trace_hardirqs_[on|off] does all the per-cpu
manipulations and NMI checks even if tracing is completely disabled for
some insane reason. For example, netperf running UDP_STREAM on localhost
incurs a 4-6% performance penalty without any tracing if IRQFLAGS is
set. It can be put behind a static brach but even the function entry/exit
costs a little bit.

Link: https://lkml.kernel.org/r/20200409104034.GJ3818@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing/doc: Fix ascii-art in histogram-design.rst

This fixes the Sphinx parallel build error when building htmldocs:

docutils.utils.SystemMessage: /home/sfr/next/next/Documentation/trace/histogram-design.rst:219: (SEVERE/4) Unexpected section title.

It also fixes a bunch of other warnings I noticed when fixing the
above, caused by mixing ascii-art and text.

Link: https://lkml.kernel.org/r/69c291c76964642a417e5dd170d183ba6b552010.camel@kernel.org
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing: Add a trace print when traceoff_on_warning is triggered

When "traceoff_on_warning" is enabled and a warning happens, there can still
be many trace events happening on other CPUs between the time the warning
occurred and the last trace event on that same CPU. This can cause confusion
in examining the trace, as it may not be obvious where the warning happened.
By adding a trace print into the trace just before disabling tracing, it
makes it obvious where the warning occurred, and the developer doesn't have
to look at other means to see what CPU it occurred on.

Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

ftrace,bug: Improve traceoff_on_warn

While doing some tracing, I found a huge portion of the per-cpu buffer
was taken by printk/serial output because we're disabling the trace far
too late (after printing the CUT string).

Improve matters for architectures that have GENERIC_BUG + _BUG_FLAGS by
killing the tracer in the exception handler before printing anything
much.

Link: https://lkml.kernel.org/r/20200528145240.GF706495@hirez.programming.kicks-ass.net
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

selftests/ftrace: Distinguish between hist and synthetic event checks

With synthetic events now a separate config item as a result of
'tracing: Move synthetic events to a separate file', tests that use
both need to explicitly check for hist trigger support rather than
relying on hist triggers to pull in synthetic events.

Add an additional hist trigger check to all the trigger tests that now
require it, otherwise they'll fail if synthetic events but not hist
triggers are enabled.

Link: http://lkml.kernel.org/r/af36c539006ef2768114b4ed38e6b054f7c7a3bd.1590693308.git.zanussi@kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing: Move synthetic events to a separate file

With the addition of the in-kernel synthetic event API, synthetic
events are no longer specifically tied to the histogram triggers.

The synthetic event code is also making trace_event_hist.c very
bloated, so for those reasons, move it to a separate file,
trace_events_synth.c, along with a new trace_synth.h header file.

Because synthetic events are now independent from hist triggers, add a
new CONFIG_SYNTH_EVENTS config option, and have CONFIG_HIST_TRIGGERS
select it, and have CONFIG_SYNTH_EVENT_GEN_TEST depend on it.

Link: http://lkml.kernel.org/r/4d1fa1f85ed5982706ac44844ac92451dcb04715.1590693308.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing: Fix events.rst section numbering

The in-kernel trace event API should have its own section, and the
duplicate section numbers need fixing as well.

Link: https://lkml.kernel.org/r/90ea854dfb728390b50ddf8a8675238973ee014a.camel@kernel.org
Reported-by: Li Xinhai <lixinhai.lxh@gmail.com>
Reviewed-by: Li Xinhai <lixinhai.lxh@gmail.com>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing/doc: Fix typos in histogram-design.rst

There's a few typos in the histogram-design.rst document that need need to
be fixed.

Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing: Add hist_debug trace event files for histogram debugging

Add a new "hist_debug" file for each trace event, which when read will
dump out a bunch of internal details about the hist triggers defined
on that event.

This is normally off but can be enabled by saying 'y' to the new
CONFIG_HIST_TRIGGERS_DEBUG config option.

This is in support of the new Documentation file describing histogram
internals, Documentation/trace/histogram-design.rst, which was
requested by developers trying to understand the internals when
extending or making use of the hist triggers for higher-level tools.

The histogram-design.rst documentation refers to the hist_debug files
and demonstrates their use with output in the test examples.

Link: http://lkml.kernel.org/r/77914c22b0ba493d9783c53bbfbc6087d6a7e1b1.1585941485.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing: Add histogram-design document

Add a new Documentation/trace/histogram-design.rst file describing the
ftrace histogram low-level design, meant to help developers trying to
understand the internals when extending or making use of the hist
triggers for higher-level tools.

This documentation refers to the hist_debug files implemented by
'tracing: Add hist_debug trace event files for histogram debugging' so
users wishing to try out the test examples here should make sure
CONFIG_HIST_TRIGGERS_DEBUG is enabled.

Link: http://lkml.kernel.org/r/256b29c3274bb89a10157c4a8d1a8bce7e74849e.1585941485.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing: Check state.disabled in synth event trace functions

Since trace_state.disabled is set in __synth_event_trace_start() at
the same time -ENOENT is returned, don't bother returning -ENOENT -
just have callers check trace_state.disabled instead, and avoid the
extra return val munging.

Link: http://lkml.kernel.org/r/87315c3889af870e8370e82b76cf48b426d70130.1585941485.git.zanussi@kernel.org
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@godmis.org>

tracing/probe: reverse arguments to list_add

Elsewhere in the file, the function trace_kprobe_has_same_kprobe uses
a trace_probe_event.probes object as the second argument of
list_for_each_entry, ie as a list head, while the list_for_each_entry
iterates over the list fields of the trace_probe structures, making
them the list elements. So, exchange the arguments on the list_add
call to put the list head in the second argument.

Since both list_head structures were just initialized, this problem
did not cause any loss of information.

Link: https://lkml.kernel.org/r/1588879808-24488-1-git-send-email-Julia.Lawall@inria.fr
Fixes: 60d53e2c3b75 ("tracing/probe: Split trace_event related data from trace_probe")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tools/bootconfig: Add a summary of test cases and return error

Add summary lines of test cases and return an error
code if any test case fails so that tester don't have
to monitor the output.

Link: https://lkml.kernel.org/r/158898590533.22749.10269622752797822320.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

ftrace: show debugging information when panic_on_warn set

When an anomaly is detected in the function call modification
code, ftrace_bug() is called to disable function tracing as well
as give some warn and information that may help debug the problem.

But currently, we call FTRACE_WARN_ON_ONCE() first in ftrace_bug(),
so when panic_on_warn is set, we can't see the debugging information
here. Call FTRACE_WARN_ON_ONCE() at the end of ftrace_bug() to ensure
that the debugging information is displayed first.

after this patch, the dmesg looks like:

------------[ ftrace bug ]------------
ftrace failed to modify
[<ffff800010081004>] bcm2835_handle_irq+0x4/0x58
actual: 1f:20:03:d5
Setting ftrace call site to call ftrace function
ftrace record flags: 80000001
(1)
expected tramp: ffff80001009d6f0
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1635 at kernel/trace/ftrace.c:2078 ftrace_bug+0x204/0x238
Kernel panic - not syncing: panic_on_warn set ...
CPU: 2 PID: 1635 Comm: sh Not tainted 5.7.0-rc5-00033-gb922183867f5 #14
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x1b0
show_stack+0x20/0x30
dump_stack+0xc0/0x10c
panic+0x16c/0x368
__warn+0x120/0x160
report_bug+0xc8/0x160
bug_handler+0x28/0x98
brk_handler+0x70/0xd0
do_debug_exception+0xcc/0x1ac
el1_sync_handler+0xe4/0x120
el1_sync+0x7c/0x100
ftrace_bug+0x204/0x238

Link: https://lkml.kernel.org/r/20200515100828.7091-1-cj.chengjian@huawei.com
Signed-off-by: Cheng Jian <cj.chengjian@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Linux 5.7-rc6

Merge tag 'for-linus-5.7-2' of git://github.com/cminyard/linux-ipmi

Pull IPMI update from Corey Minyard:
"Convert i2c_new_device() to i2c_new_client_device()

  Wolfram Sang has asked to have this included in 5.7 so the deprecated
  API can be removed next release. There should be no functional
  difference.

  I think that entire this section of code can be removed; it is
  leftover from other things that have since changed, but this is the
  safer thing to do for now. The full removal can happen next release"

* tag 'for-linus-5.7-2' of git://github.com/cminyard/linux-ipmi:
  char: ipmi: convert to use i2c_new_client_device()

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
"Some more clk driver fixes and one core framework fix:

   - A handful of TI driver fixes for bad of_node_put() and incorrect
     parent names

   - Rockchip rk3228 aclk_gpu* creation was interfering with lima GPU
     work so we use a composite clk now

   - Resuming from suspend on Tegra Jetson TK1 was broken because an
     audio PLL calculated an incorrect rate

   - A fix for devicetree probing on IM-PD1 by actually specifying a clk
     name which is required to pass clk registration

   - Avoid list corruption if registration fails for a critical clk"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: ti: clkctrl: convert subclocks to use proper names also
  clk: ti: am33xx: fix RTC clock parent
  clk: ti: clkctrl: Fix Bad of_node_put within clkctrl_get_name
  clk: tegra: Fix initial rate for pll_a on Tegra124
  clk: impd1: Look up clock-output-names
  clk: Unlink clock if failed to prepare or enable
  clk: rockchip: fix incorrect configuration of rk3228 aclk_gpu* clocks

Merge tag 'usb-5.7-rc6' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here are a number of USB fixes for 5.7-rc6

  The "largest" in here is a bunch of raw-gadget fixes and api changes
  as the driver just showed up in -rc1 and work has been done to fix up
  some uapi issues found with the original submission, before it shows
  up in a -final release.

  Other than that, a bunch of other small USB gadget fixes, xhci fixes,
  some quirks, andother tiny fixes for reported issues.

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
  USB: gadget: fix illegal array access in binding with UDC
  usb: core: hub: limit HUB_QUIRK_DISABLE_AUTOSUSPEND to USB5534B
  USB: usbfs: fix mmap dma mismatch
  usb: host: xhci-plat: keep runtime active when removing host
  usb: xhci: Fix NULL pointer dereference when enqueuing trbs from urb sg list
  usb: cdns3: gadget: make a bunch of functions static
  usb: mtu3: constify struct debugfs_reg32
  usb: gadget: udc: atmel: Make some symbols static
  usb: raw-gadget: fix null-ptr-deref when reenabling endpoints
  usb: raw-gadget: documentation updates
  usb: raw-gadget: support stalling/halting/wedging endpoints
  usb: raw-gadget: fix gadget endpoint selection
  usb: raw-gadget: improve uapi headers comments
  usb: typec: mux: intel: Fix DP_HPD_LVL bit field
  usb: raw-gadget: fix return value of ep read ioctls
  usb: dwc3: select USB_ROLE_SWITCH
  usb: gadget: legacy: fix error return code in gncm_bind()
  usb: gadget: legacy: fix error return code in cdc_bind()
  usb: gadget: legacy: fix redundant initialization warnings
  usb: gadget: tegra-xudc: Fix idle suspend/resume
  ...

Merge branch 'exec-linus' of git://git./linux/kernel/git/ebiederm/user-namespace

Pull execve fix from Eric Biederman:
"While working on my exec cleanups I found a bug in exec that I
  introduced by accident a couple of years ago. I apparently missed the
  fact that bprm->file can change.

  Now I have a very personal motive to clean up exec and make it more
  approachable.

  The change is just moving woud_dump to where it acts on the final
  bprm->file not the initial bprm->file. I have been careful and tested
  and verify this fix works"

* 'exec-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  exec: Move would_dump into flush_old_exec

Merge tag 'objtool-urgent-2020-05-17' of git://git./linux/kernel/git/tip/tip

Pull x86 stack unwinding fix from Thomas Gleixner:
"A single bugfix for the ORC unwinder to ensure that the error flag
  which tells the unwinding code whether a stack trace can be trusted or
  not is always set correctly.

  This was messed up by a couple of changes in the recent past"

* tag 'objtool-urgent-2020-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/unwind/orc: Fix error handling in __unwind_start()

Merge tag 'x86_urgent_for_v5.7-rc7' of git://git./linux/kernel/git/tip/tip

Pull x86 fix from Borislav Petkov:
"A single fix for early boot crashes of kernels built with gcc10 and
stack protector enabled"

* tag 'x86_urgent_for_v5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Fix early boot crash on gcc-10, third try

exec: Move would_dump into flush_old_exec

I goofed when I added mm->user_ns support to would_dump.  I missed the
fact that in the case of binfmt_loader, binfmt_em86, binfmt_misc, and
binfmt_script bprm->file is reassigned.  Which made the move of
would_dump from setup_new_exec to __do_execve_file before exec_binprm
incorrect as it can result in would_dump running on the script instead
of the interpreter of the script.

The net result is that the code stopped making unreadable interpreters
undumpable.  Which allows them to be ptraced and written to disk
without special permissions.  Oops.

The move was necessary because the call in set_new_exec was after
bprm->mm was no longer valid.

To correct this mistake move the misplaced would_dump from
__do_execve_file into flos_old_exec, before exec_mmap is called.

I tested and confirmed that without this fix I can attach with gdb to
a script with an unreadable interpreter, and with this fix I can not.

Cc: stable@vger.kernel.org
Fixes: f84df2a6f268 ("exec: Ensure mm->user_ns contains the execed files")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Merge tag '5.7-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
"Three small cifs/smb3 fixes, one for stable"

* tag '5.7-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix leaked reference on requeued write
  cifs: Fix null pointer check in cifs_read
  CIFS: Spelling s/EACCESS/EACCES/

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"A new testcase for guest debugging (gdbstub) that exposed a bunch of
  bugs, mostly for AMD processors. And a few other x86 fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Fix off-by-one error in kvm_vcpu_ioctl_x86_setup_mce
  KVM: x86: Fix pkru save/restore when guest CR4.PKE=0, move it to x86.c
  KVM: SVM: Disable AVIC before setting V_IRQ
  KVM: Introduce kvm_make_all_cpus_request_except()
  KVM: VMX: pass correct DR6 for GD userspace exit
  KVM: x86, SVM: isolate vcpu->arch.dr6 from vmcb->save.dr6
  KVM: SVM: keep DR6 synchronized with vcpu->arch.dr6
  KVM: nSVM: trap #DB and #BP to userspace if guest debugging is on
  KVM: selftests: Add KVM_SET_GUEST_DEBUG test
  KVM: X86: Fix single-step with KVM_SET_GUEST_DEBUG
  KVM: X86: Set RTM for DB_VECTOR too for KVM_EXIT_DEBUG
  KVM: x86: fix DR6 delivery for various cases of #DB injection
  KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properly

Merge tag 'powerpc-5.7-4' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

- A fix for unrecoverable SLB faults in the interrupt exit path,
   introduced by the recent rewrite of interrupt exit in C.

- Four fixes for our KUAP (Kernel Userspace Access Prevention) support
   on 64-bit. These are all fairly minor with the exception of the
   change to evaluate the get/put_user() arguments before we enable user
   access, which reduces the amount of code we run with user access
   enabled.

- A fix for our secure boot IMA rules, if enforcement of module
   signatures is enabled at runtime rather than build time.

- A fix to our 32-bit VDSO clock_getres() which wasn't falling back to
   the syscall for unknown clocks.

- A build fix for CONFIG_PPC_KUAP_DEBUG on 32-bit BookS, and another
   for 40x.

Thanks to: Christophe Leroy, Hugh Dickins, Nicholas Piggin, Aurelien
Jarno, Mimi Zohar, Nayna Jain.

* tag 'powerpc-5.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/40x: Make more space for system call exception
  powerpc/vdso32: Fallback on getres syscall when clock is unknown
  powerpc/32s: Fix build failure with CONFIG_PPC_KUAP_DEBUG
  powerpc/ima: Fix secure boot rules in ima arch policy
  powerpc/64s/kuap: Restore AMR in fast_interrupt_return
  powerpc/64s/kuap: Restore AMR in system reset exception
  powerpc/64/kuap: Move kuap checks out of MSR[RI]=0 regions of exit code
  powerpc/64s: Fix unrecoverable SLB crashes due to preemption check
  powerpc/uaccess: Evaluate macro arguments once, before user access is allowed

Merge tag 'csky-for-linus-5.7-rc6' of git://github.com/c-sky/csky-linux

Pull csky updates from Guo Ren:

- fix for copy_from/to_user (a hard-to-find bug, thx Viro)

- fix for calltrace panic without FRAME_POINT

- two fixes for perf

- two build fixes

- four fixes for non-fatal bugs (msa, rm dis_irq, cleanup psr,
   gdbmacros.txt)

* tag 'csky-for-linus-5.7-rc6' of git://github.com/c-sky/csky-linux:
  csky: Fixup raw_copy_from_user()
  csky: Fixup gdbmacros.txt with name sp in thread_struct
  csky: Fixup remove unnecessary save/restore PSR code
  csky: Fixup remove duplicate irq_disable
  csky: Fixup calltrace panic
  csky: Fixup perf callchain unwind
  csky: Fixup msa highest 3 bits mask
  csky: Fixup perf probe -x hungup
  csky: Fixup compile error for abiv1 entry.S
  csky/ftrace: Fixup error when disable CONFIG_DYNAMIC_FTRACE

Merge tag 'arm-soc-fixes-5.7' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC/dt fixes from Arnd Bergmann:
"This round of fixes is almost exclusively device tree changes, with
  trivial defconfig fixes and one compiler warning fix added in.

  A number of patches are to fix dtc warnings, in particular on Amlogic,
  i.MX and Rockchips.

  Other notable changes include:

  Renesas:
   - Fix a wrong clock configuration on R-Mobile A1
   - Fix IOMMU support on R-Car V3H

  Allwinner
   - Multiple audio fixes

  Qualcomm
   - Use a safe CPU voltage on MSM8996
   - Fixes to match a late audio driver change

  Rockchip:
   - Some fixes for the newly added Pinebook Pro

  NXP i.MX:
   - Fix I2C1 pinctrl configuration for i.MX27 phytec-phycard board
   - Fix imx6dl-yapp4-ursa board Ethernet connection

  OMAP:
   - A regression fix for non-existing can device on am534x-idk
   - Fix flakey wlan on droid4 where some devices would not connect at
     all because of internal pull being used with an external pull
   - Fix occasional missed wake-up events on droid4 modem uart"

* tag 'arm-soc-fixes-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (51 commits)
  ARM: dts: iwg20d-q7-dbcm-ca: Remove unneeded properties in hdmi@39
  ARM: dts: renesas: Make hdmi encoder nodes compliant with DT bindings
  arm64: dts: renesas: Make hdmi encoder nodes compliant with DT bindings
  arm64: defconfig: add MEDIA_PLATFORM_SUPPORT
  arm64: defconfig: ARCH_R8A7795: follow changed config symbol name
  arm64: defconfig: add DRM_DISPLAY_CONNECTOR
  arm64: defconfig: DRM_DUMB_VGA_DAC: follow changed config symbol name
  ARM: oxnas: make ox820_boot_secondary static
  ARM: dts: r8a7740: Add missing extal2 to CPG node
  ARM: dts: omap4-droid4: Fix occasional lost wakeirq for uart1
  ARM: dts: omap4-droid4: Fix flakey wlan by disabling internal pull for gpio
  arm64: dts: allwinner: a64: Remove unused SPDIF sound card
  arm64: dts: allwinner: a64: pinetab: Fix cpvdd supply name
  arm64: dts: meson-g12: remove spurious blank line
  arm64: dts: meson-g12b-khadas-vim3: add missing frddr_a status property
  arm64: dts: meson-g12-common: fix dwc2 clock names
  arm64: dts: meson-g12b-ugoos-am6: fix usb vbus-supply
  arm64: dts: freescale: imx8mp: update input_val for AUDIOMIX_BIT_STREAM
  ARM: dts: r7s9210: Remove bogus clock-names from OSTM nodes
  ARM: dts: rockchip: fix pinctrl sub nodename for spi in rk322x.dtsi
  ...

Merge tag 'block-5.7-2020-05-16' of git://git.kernel.dk/linux-block

Pull block fix from Jens Axboe:
"Just a single NVMe pull in here, with a single fix for a missing DMA
read memory barrier for completions"

* tag 'block-5.7-2020-05-16' of git://git.kernel.dk/linux-block:
nvme-pci: dma read memory barrier for completions

Merge tag 'pinctrl-v5.7-2' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
"A bunch of pin control fixes, some a bit overly ripe, sorry about
  that. We have important systems like Intel laptops and Qualcomm mobile
  chips covered.

   - Pad lock register on Intel Sunrisepoint had the wrong offset

   - Fix pin config setting for the Baytrail GPIO chip

   - Fix a compilation warning in the Mediatek driver

   - Fix a function group name in the Actions driver

   - Fix a behaviour bug in the edge polarity code in the Qualcomm
     driver

   - Add a missing spinlock in the Intel Cherryview driver

   - Add affinity callbacks to the Qualcomm MSMGPIO chip"

* tag 'pinctrl-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: qcom: Add affinity callbacks to msmgpio IRQ chip
  pinctrl: cherryview: Add missing spinlock usage in chv_gpio_irq_handler
  pinctrl: qcom: fix wrong write in update_dual_edge
  pinctrl: actions: fix function group name for i2c0_group
  pinctrl: mediatek: remove shadow variable declaration
  pinctrl: baytrail: Enable pin configuration setting for GPIO chip
  pinctrl: sunrisepoint: Fix PAD lock register offset for SPT-H

Merge tag 'io_uring-5.7-2020-05-15' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
"Two small fixes that should go into this release:

   - Check and handle zero length splice (Pavel)

   - Fix a regression in this merge window for fixed files used with
     polled block IO"

* tag 'io_uring-5.7-2020-05-15' of git://git.kernel.dk/linux-block:
  io_uring: polled fixed file must go through free iteration
  io_uring: fix zero len do_splice()

Merge branch 'nvme-5.7' of git://git.infradead.org/nvme into block-5.7

Pull NVMe fix from Christoph.

* 'nvme-5.7' of git://git.infradead.org/nvme:
nvme-pci: dma read memory barrier for completions

Merge tag 'renesas-fixes-for-v5.7-tag2' of git://git./linux/kernel/git/geert/renesas-devel into arm/fixes

Renesas fixes for v5.7 (take two)

  - Fix a wrong clock configuration on R-Mobile A1,
  - Minor fixes that are fast-tracked to avoid introducing regressions
    during conversion of DT bindings to json-schema.

* tag 'renesas-fixes-for-v5.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  ARM: dts: iwg20d-q7-dbcm-ca: Remove unneeded properties in hdmi@39
  ARM: dts: renesas: Make hdmi encoder nodes compliant with DT bindings
  arm64: dts: renesas: Make hdmi encoder nodes compliant with DT bindings
  ARM: dts: r8a7740: Add missing extal2 to CPG node

Link: https://lore.kernel.org/r/20200515125043.22811-1-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-fixes-for-5.7-1' of git://git./linux/kernel/git/sunxi/linux into arm/fixes

Two fixes for the Allwinner SoCs, one to remove some inexistant sound card on
the A64, and one to fix the audio codec regulator on the pinetab.

* tag 'sunxi-fixes-for-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a64: Remove unused SPDIF sound card
arm64: dts: allwinner: a64: pinetab: Fix cpvdd supply name

Link: https://lore.kernel.org/r/f7a98a47-316d-4b1a-b5a5-0e1e330d5f52.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'nfs-for-5.7-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:

  Stable fixes:
   - nfs: fix NULL deference in nfs4_get_valid_delegation

  Bugfixes:
   - Fix corruption of the return value in cachefiles_read_or_alloc_pages()
   - Fix several fscache cookie issues
   - Fix a fscache queuing race that can trigger a BUG_ON
   - NFS: Fix two use-after-free regressions due to the RPC_TASK_CRED_NOREF flag
   - SUNRPC: Fix a use-after-free regression in rpc_free_client_work()
   - SUNRPC: Fix a race when tearing down the rpc client debugfs directory
   - SUNRPC: Signalled ASYNC tasks need to exit
   - NFSv3: fix rpc receive buffer size for MOUNT call"

* tag 'nfs-for-5.7-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv3: fix rpc receive buffer size for MOUNT call
  SUNRPC: 'Directory with parent 'rpc_clnt' already present!'
  NFS/pnfs: Don't use RPC_TASK_CRED_NOREF with pnfs
  NFS: Don't use RPC_TASK_CRED_NOREF with delegreturn
  SUNRPC: Signalled ASYNC tasks need to exit
  nfs: fix NULL deference in nfs4_get_valid_delegation
  SUNRPC: fix use-after-free in rpc_free_client_work()
  cachefiles: Fix race between read_waiter and read_copier involving op->to_do
  NFSv4: Fix fscache cookie aux_data to ensure change_attr is included
  NFS: Fix fscache super_cookie allocation
  NFS: Fix fscache super_cookie index_key from changing after umount
  cachefiles: Fix corruption of the return value in cachefiles_read_or_alloc_pages()

Merge git://git./linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

1) Fix sk_psock reference count leak on receive, from Xiyu Yang.

2) CONFIG_HNS should be invisible, from Geert Uytterhoeven.

3) Don't allow locking route MTUs in ipv6, RFCs actually forbid this,
    from Maciej Żenczykowski.

4) ipv4 route redirect backoff wasn't actually enforced, from Paolo
    Abeni.

5) Fix netprio cgroup v2 leak, from Zefan Li.

6) Fix infinite loop on rmmod in conntrack, from Florian Westphal.

7) Fix tcp SO_RCVLOWAT hangs, from Eric Dumazet.

8) Various bpf probe handling fixes, from Daniel Borkmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits)
  selftests: mptcp: pm: rm the right tmp file
  dpaa2-eth: properly handle buffer size restrictions
  bpf: Restrict bpf_trace_printk()'s %s usage and add %pks, %pus specifier
  bpf: Add bpf_probe_read_{user, kernel}_str() to do_refine_retval_range
  bpf: Restrict bpf_probe_read{, str}() only to archs where they work
  MAINTAINERS: Mark networking drivers as Maintained.
  ipmr: Add lockdep expression to ipmr_for_each_table macro
  ipmr: Fix RCU list debugging warning
  drivers: net: hamradio: Fix suspicious RCU usage warning in bpqether.c
  net: phy: broadcom: fix BCM54XX_SHD_SCR3_TRDDAPD value for BCM54810
  tcp: fix error recovery in tcp_zerocopy_receive()
  MAINTAINERS: Add Jakub to networking drivers.
  MAINTAINERS: another add of Karsten Graul for S390 networking
  drivers: ipa: fix typos for ipa_smp2p structure doc
  pppoe: only process PADT targeted at local interfaces
  selftests/bpf: Enforce returning 0 for fentry/fexit programs
  bpf: Enforce returning 0 for fentry/fexit progs
  net: stmmac: fix num_por initialization
  security: Fix the default value of secid_to_secctx hook
  libbpf: Fix register naming in PT_REGS s390 macros
  ...

Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
"A few minor bug fixes for user visible defects, and one regression:

   - Various bugs from static checkers and syzkaller

   - Add missing error checking in mlx4

   - Prevent RTNL lock recursion in i40iw

   - Fix segfault in cxgb4 in peer abort cases

   - Fix a regression added in 5.7 where the IB_EVENT_DEVICE_FATAL could
     be lost, and wasn't delivered to all the FDs"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/uverbs: Move IB_EVENT_DEVICE_FATAL to destroy_uobj
  RDMA/uverbs: Do not discard the IB_EVENT_DEVICE_FATAL event
  RDMA/iw_cxgb4: Fix incorrect function parameters
  RDMA/core: Fix double put of resource
  IB/core: Fix potential NULL pointer dereference in pkey cache
  IB/hfi1: Fix another case where pq is left on waitlist
  IB/i40iw: Remove bogus call to netdev_master_upper_dev_get()
  IB/mlx4: Test return value of calls to ib_get_cached_pkey
  RDMA/rxe: Always return ERR_PTR from rxe_create_mmap_info()
  i40iw: Fix error handling in i40iw_manage_arp_cache()

Merge tag 'linux-kselftest-5.7-rc6' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:

- lkdtm runner fixes to prevent dmesg clearing and shellcheck errors

- ftrace test handling when test module doesn't exist

- nsfs test fix to replace zero-length array with flexible-array

- dmabuf-heaps test fix to return clear error value

* tag 'linux-kselftest-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/lkdtm: Use grep -E instead of egrep
  selftests/lkdtm: Don't clear dmesg when running tests
  selftests/ftrace: mark irqsoff_tracer.tc test as unresolved if the test module does not exist
  tools/testing: Replace zero-length array with flexible-array
  kselftests: dmabuf-heaps: Fix confused return value on expected error testing

Merge tag 'riscv-for-linus-5.7-rc6' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:
"A handful of build fixes, all found by Huawei's autobuilder.

  None of these patches should have any functional impact on kernels
  that build, and they're mostly related to various features
  intermingling with !MMU.

  While some of these might be better hoisted to generic code, it seems
  better to have the simple fixes in the meanwhile.

  As far as I know these are the only outstanding patches for 5.7"

* tag 'riscv-for-linus-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: mmiowb: Fix implicit declaration of function 'smp_processor_id'
  riscv: pgtable: Fix __kernel_map_pages build error if NOMMU
  riscv: Make SYS_SUPPORTS_HUGETLBFS depends on MMU
  riscv: Disable ARCH_HAS_DEBUG_VIRTUAL if NOMMU
  riscv: Add pgprot_writecombine/device and PAGE_SHARED defination if NOMMU
  riscv: stacktrace: Fix undefined reference to `walk_stackframe'
  riscv: Fix unmet direct dependencies built based on SOC_VIRT
  riscv: perf: RISCV_BASE_PMU should be independent
  riscv: perf_event: Make some funciton static

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fix from Catalin Marinas:
"Fix flush_icache_range() second argument in machine_kexec() to be an
address rather than size"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: fix the flush_icache_range arguments in machine_kexec

Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Alexei Starovoitov says:

====================
pull-request: bpf 2020-05-15

The following pull-request contains BPF updates for your *net* tree.

We've added 9 non-merge commits during the last 2 day(s) which contain
a total of 14 files changed, 137 insertions(+), 43 deletions(-).

The main changes are:

1) Fix secid_to_secctx LSM hook default value, from Anders.

2) Fix bug in mmap of bpf array, from Andrii.

3) Restrict bpf_probe_read to archs where they work, from Daniel.

4) Enforce returning 0 for fentry/fexit progs, from Yonghong.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

KVM: x86: Fix off-by-one error in kvm_vcpu_ioctl_x86_setup_mce

Bank_num is a one-based count of banks, not a zero-based index. It
overflows the allocated space only when strictly greater than
KVM_MAX_MCE_BANKS.

Fixes: a9e38c3e01ad ("KVM: x86: Catch potential overrun in MCE setup")
Signed-off-by: Jue Wang <juew@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <20200511225616.19557-1-jmattson@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge branch 'kvm-amd-fixes' into HEAD

This topic branch will be included in both kvm/master and kvm/next
(for 5.8) in order to simplify testing of kvm/next.

selftests: mptcp: pm: rm the right tmp file

"$err" is a variable pointing to a temp file. "$out" is not: only used
as a local variable in "check()" and representing the output of a
command line.

Fixes: eedbc685321b (selftests: add PM netlink functional tests)
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

dpaa2-eth: properly handle buffer size restrictions

Depending on the WRIOP version, the buffer size on the RX path must by a
multiple of 64 or 256. Handle this restriction properly by aligning down
the buffer size to the necessary value. Also, use the new buffer size
dynamically computed instead of the compile time one.

Fixes: 27c874867c4e ("dpaa2-eth: Use a single page per Rx buffer")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'hwmon-for-v5.7-rc6' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

- Fix ADC access synchronization problem with da9052 driver

- Fix temperature limit and status reporting in nct7904 driver

- Fix drivetemp temperature reporting if SCT is supported but SCT data
   tables are not.

* tag 'hwmon-for-v5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (da9052) Synchronize access with mfd
  hwmon: (nct7904) Fix incorrect range of temperature limit registers
  hwmon: (nct7904) Read all SMI status registers in probe function
  hwmon: (drivetemp) Fix SCT support if SCT data tables are not supported

Merge tag 'sound-5.7-rc6' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"Things look good and calming down; the only change to ALSA core is the
  fix for racy rawmidi buffer accesses spotted by syzkaller, and the
  rest are all small device-specific quirks for HD-audio and USB-audio
  devices"

* tag 'sound-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Limit int mic boost for Thinkpad T530
  ALSA: hda/realtek - Add COEF workaround for ASUS ZenBook UX431DA
  ALSA: hda/realtek: Enable headset mic of ASUS UX581LV with ALC295
  ALSA: hda/realtek - Enable headset mic of ASUS UX550GE with ALC295
  ALSA: hda/realtek - Enable headset mic of ASUS GL503VM with ALC295
  ALSA: hda/realtek: Add quirk for Samsung Notebook
  ALSA: rawmidi: Fix racy buffer resize under concurrent accesses
  ALSA: usb-audio: add mapping for ASRock TRX40 Creator
  ALSA: hda/realtek - Fix S3 pop noise on Dell Wyse
  Revert "ALSA: hda/realtek: Fix pop noise on ALC225"
  ALSA: firewire-lib: fix 'function sizeof not defined' error of tracepoints format
  ALSA: usb-audio: Add control message quirk delay for Kingston HyperX headset

Merge tag 'drm-fixes-2020-05-15' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"As mentioned last week an i915 PR came in late, but I left it, so the
  i915 bits of this cover 2 weeks, which is why it's likely a bit larger
  than usual.

  Otherwise it's mostly amdgpu fixes, one tegra fix, one meson fix.

  i915:
   - Handle idling during i915_gem_evict_something busy loops (Chris)
   - Mark current submissions with a weak-dependency (Chris)
   - Propagate error from completed fences (Chris)
   - Fixes on execlist to avoid GPU hang situation (Chris)
   - Fixes couple deadlocks (Chris)
   - Timeslice preemption fixes (Chris)
   - Fix Display Port interrupt handling on Tiger Lake (Imre)
   - Reduce debug noise around Frame Buffer Compression (Peter)
   - Fix logic around IPC W/a for Coffee Lake and Kaby Lake (Sultan)
   - Avoid dereferencing a dead context (Chris)

  tegra:
   - tegra120/4 smmu fixes

  amdgpu:
   - Clockgating fixes
   - Fix fbdev with scatter/gather display
   - S4 fix for navi
   - Soft recovery for gfx10
   - Freesync fixes
   - Atomic check cursor fix
   - Add a gfxoff quirk
   - MST fix

  amdkfd:
   - Fix GEM reference counting

  meson:
   - error code propogation fix"

* tag 'drm-fixes-2020-05-15' of git://anongit.freedesktop.org/drm/drm: (29 commits)
  drm/i915: Handle idling during i915_gem_evict_something busy loops
  drm/meson: pm resume add return errno branch
  drm/amd/amdgpu: Update update_config() logic
  drm/amd/amdgpu: add raven1 part to the gfxoff quirk list
  drm/i915: Mark concurrent submissions with a weak-dependency
  drm/i915: Propagate error from completed fences
  drm/i915/gvt: Fix kernel oops for 3-level ppgtt guest
  drm/i915/gvt: Init DPLL/DDI vreg for virtual display instead of inheritance.
  drm/amd/display: add basic atomic check for cursor plane
  drm/amd/display: Fix vblank and pageflip event handling for FreeSync
  drm/amdgpu: implement soft_recovery for gfx10
  drm/amdgpu: enable hibernate support on Navi1X
  drm/amdgpu: Use GEM obj reference for KFD BOs
  drm/amdgpu: force fbdev into vram
  drm/amd/powerplay: perform PG ungate prior to CG ungate
  drm/amdgpu: drop unnecessary cancel_delayed_work_sync on PG ungate
  drm/amdgpu: disable MGCG/MGLS also on gfx CG ungate
  drm/i915/execlists: Track inflight CCID
  drm/i915/execlists: Avoid reusing the same logical CCID
  drm/i915/gem: Remove object_is_locked assertion from unpin_from_display_plane
  ...

Merge branch 'restrict-bpf_probe_read'

Daniel Borkmann says:

====================
Small set of fixes in order to restrict BPF helpers for tracing which are
broken on archs with overlapping address ranges as per discussion in [0].
I've targetted this for -bpf tree so they can be routed as fixes. Thanks!

v1 -> v2:
  - switch to reusable %pks, %pus format specifiers (Yonghong)
    - fixate %s on kernel_ds probing for archs with overlapping addr space

      [0] https://lore.kernel.org/bpf/CAHk-=wjJKo0GVixYLmqPn-Q22WFu0xHaBSjKEo7e7Yw72y5SPQ@mail.gmail.com/T/
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: Restrict bpf_trace_printk()'s %s usage and add %pks, %pus specifier

Usage of plain %s conversion specifier in bpf_trace_printk() suffers from the
very same issue as bpf_probe_read{,str}() helpers, that is, it is broken on
archs with overlapping address ranges.

While the helpers have been addressed through work in 6ae08ae3dea2 ("bpf: Add
probe_read_{user, kernel} and probe_read_{user, kernel}_str helpers"), we need
an option for bpf_trace_printk() as well to fix it.

Similarly as with the helpers, force users to make an explicit choice by adding
%pks and %pus specifier to bpf_trace_printk() which will then pick the corresponding
strncpy_from_unsafe*() variant to perform the access under KERNEL_DS or USER_DS.
The %pk* (kernel specifier) and %pu* (user specifier) can later also be extended
for other objects aside strings that are probed and printed under tracing, and
reused out of other facilities like bpf_seq_printf() or BTF based type printing.

Existing behavior of %s for current users is still kept working for archs where it
is not broken and therefore gated through CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE.
For archs not having this property we fall-back to pick probing under KERNEL_DS as
a sensible default.

Fixes: 8d3b7dce8622 ("bpf: add support for %s specifier to bpf_trace_printk()")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Link: https://lore.kernel.org/bpf/20200515101118.6508-4-daniel@iogearbox.net

bpf: Add bpf_probe_read_{user, kernel}_str() to do_refine_retval_range

Given bpf_probe_read{,str}() BPF helpers are now only available under
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE, we need to add the drop-in
replacements of bpf_probe_read_{kernel,user}_str() to do_refine_retval_range()
as well to avoid hitting the same issue as in 849fa50662fbc ("bpf/verifier:
refine retval R0 state for bpf_get_stack helper").

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200515101118.6508-3-daniel@iogearbox.net

bpf: Restrict bpf_probe_read{, str}() only to archs where they work

Given the legacy bpf_probe_read{,str}() BPF helpers are broken on archs
with overlapping address ranges, we should really take the next step to
disable them from BPF use there.

To generally fix the situation, we've recently added new helper variants
bpf_probe_read_{user,kernel}() and bpf_probe_read_{user,kernel}_str().
For details on them, see 6ae08ae3dea2 ("bpf: Add probe_read_{user, kernel}
and probe_read_{user,kernel}_str helpers").

Given bpf_probe_read{,str}() have been around for ~5 years by now, there
are plenty of users at least on x86 still relying on them today, so we
cannot remove them entirely w/o breaking the BPF tracing ecosystem.

However, their use should be restricted to archs with non-overlapping
address ranges where they are working in their current form. Therefore,
move this behind a CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE and
have x86, arm64, arm select it (other archs supporting it can follow-up
on it as well).

For the remaining archs, they can workaround easily by relying on the
feature probe from bpftool which spills out defines that can be used out
of BPF C code to implement the drop-in replacement for old/new kernels
via: bpftool feature probe macro

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/bpf/20200515101118.6508-2-daniel@iogearbox.net

USB: gadget: fix illegal array access in binding with UDC

FuzzUSB (a variant of syzkaller) found an illegal array access
using an incorrect index while binding a gadget with UDC.

Reference: https://www.spinics.net/lists/linux-usb/msg194331.html

This bug occurs when a size variable used for a buffer
is misused to access its strcpy-ed buffer.
Given a buffer along with its size variable (taken from user input),
from which, a new buffer is created using kstrdup().
Due to the original buffer containing 0 value in the middle,
the size of the kstrdup-ed buffer becomes smaller than that of the original.
So accessing the kstrdup-ed buffer with the same size variable
triggers memory access violation.

The fix makes sure no zero value in the buffer,
by comparing the strlen() of the orignal buffer with the size variable,
so that the access to the kstrdup-ed buffer is safe.

BUG: KASAN: slab-out-of-bounds in gadget_dev_desc_UDC_store+0x1ba/0x200
drivers/usb/gadget/configfs.c:266
Read of size 1 at addr ffff88806a55dd7e by task syz-executor.0/17208

CPU: 2 PID: 17208 Comm: syz-executor.0 Not tainted 5.6.8 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xce/0x128 lib/dump_stack.c:118
print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374
__kasan_report+0x131/0x1b0 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:641
__asan_report_load1_noabort+0x14/0x20 mm/kasan/generic_report.c:132
gadget_dev_desc_UDC_store+0x1ba/0x200 drivers/usb/gadget/configfs.c:266
flush_write_buffer fs/configfs/file.c:251 [inline]
configfs_write_file+0x2f1/0x4c0 fs/configfs/file.c:283
__vfs_write+0x85/0x110 fs/read_write.c:494
vfs_write+0x1cd/0x510 fs/read_write.c:558
ksys_write+0x18a/0x220 fs/read_write.c:611
__do_sys_write fs/read_write.c:623 [inline]
__se_sys_write fs/read_write.c:620 [inline]
__x64_sys_write+0x73/0xb0 fs/read_write.c:620
do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Signed-off-by: Kyungtae Kim <kt0755@gmail.com>
Reported-and-tested-by: Kyungtae Kim <kt0755@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200510054326.GA19198@pizza01
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: hub: limit HUB_QUIRK_DISABLE_AUTOSUSPEND to USB5534B

On Tue, May 12, 2020 at 09:36:07PM +0800, Kai-Heng Feng wrote [1]:
> This patch prevents my Raven Ridge xHCI from getting runtime suspend.

The problem described in v5.6 commit 1208f9e1d758c9 ("USB: hub: Fix the
broken detection of USB3 device in SMSC hub") applies solely to the
USB5534B hub [2] present on the Kingfisher Infotainment Carrier Board,
manufactured by Shimafuji Electric Inc [3].

Despite that, the aforementioned commit applied the quirk to _all_ hubs
carrying vendor ID 0x424 (i.e. SMSC), of which there are more [4] than
initially expected. Consequently, the quirk is now enabled on platforms
carrying SMSC/Microchip hub models which potentially don't exhibit the
original issue.

To avoid reports like [1], further limit the quirk's scope to
USB5534B [2], by employing both Vendor and Product ID checks.

Tested on H3ULCB + Kingfisher rev. M05.

[1] https://lore.kernel.org/linux-renesas-soc/73933975-6F0E-40F5-9584-D2B8F615C0F3@canonical.com/
[2] https://www.microchip.com/wwwproducts/en/USB5534B
[3] http://www.shimafuji.co.jp/wp/wp-content/uploads/2018/08/SBEV-RCAR-KF-M06Board_HWSpecificationEN_Rev130.pdf
[4] https://devicehunt.com/search/type/usb/vendor/0424/device/any

Fixes: 1208f9e1d758c9 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub")
Cc: stable@vger.kernel.org # v4.14+
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Hardik Gajjar <hgajjar@de.adit-jv.com>
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200514220246.13290-1-erosca@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'fixes-for-v5.7-rc6' of git://git./linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

USB: fixes for v5.7-rc6

The main part here are the important fixes for the raw-gadget before it
becomes an ABI. We're adding support for stall/halt/wedge which is
actually pretty important in many situations. There's also a NULL
pointer deref fix.

Apart from raw-gadget, I've included some recent sparse fixes to a few
drivers.

Signed-off-by: Felipe Balbi <balbi@kernel.org>
* tag 'fixes-for-v5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
  usb: cdns3: gadget: make a bunch of functions static
  usb: mtu3: constify struct debugfs_reg32
  usb: gadget: udc: atmel: Make some symbols static
  usb: raw-gadget: fix null-ptr-deref when reenabling endpoints
  usb: raw-gadget: documentation updates
  usb: raw-gadget: support stalling/halting/wedging endpoints
  usb: raw-gadget: fix gadget endpoint selection
  usb: raw-gadget: improve uapi headers comments

x86: Fix early boot crash on gcc-10, third try

... or the odyssey of trying to disable the stack protector for the
function which generates the stack canary value.

The whole story started with Sergei reporting a boot crash with a kernel
built with gcc-10:

  Kernel panic — not syncing: stack-protector: Kernel stack is corrupted in: start_secondary
  CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc5—00235—gfffb08b37df9 #139
  Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77M—D3H, BIOS F12 11/14/2013
  Call Trace:
    dump_stack
    panic
    ? start_secondary
    __stack_chk_fail
    start_secondary
    secondary_startup_64
  -—-[ end Kernel panic — not syncing: stack—protector: Kernel stack is corrupted in: start_secondary

This happens because gcc-10 tail-call optimizes the last function call
in start_secondary() - cpu_startup_entry() - and thus emits a stack
canary check which fails because the canary value changes after the
boot_init_stack_canary() call.

To fix that, the initial attempt was to mark the one function which
generates the stack canary with:

  __attribute__((optimize("-fno-stack-protector"))) ... start_secondary(void *unused)

however, using the optimize attribute doesn't work cumulatively
as the attribute does not add to but rather replaces previously
supplied optimization options - roughly all -fxxx options.

The key one among them being -fno-omit-frame-pointer and thus leading to
not present frame pointer - frame pointer which the kernel needs.

The next attempt to prevent compilers from tail-call optimizing
the last function call cpu_startup_entry(), shy of carving out
start_secondary() into a separate compilation unit and building it with
-fno-stack-protector, was to add an empty asm("").

This current solution was short and sweet, and reportedly, is supported
by both compilers but we didn't get very far this time: future (LTO?)
optimization passes could potentially eliminate this, which leads us
to the third attempt: having an actual memory barrier there which the
compiler cannot ignore or move around etc.

That should hold for a long time, but hey we said that about the other
two solutions too so...

Reported-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Kalle Valo <kvalo@codeaurora.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200314164451.346497-1-slyfox@gentoo.org

ARM: dts: iwg20d-q7-dbcm-ca: Remove unneeded properties in hdmi@39

Remove the adi,input-style and adi,input-justification properties of
hdmi@39 to make it compliant with the "adi,adv7511w" DT binding.

Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200511110611.3142-6-ricardo.canuelo@collabora.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

ARM: dts: renesas: Make hdmi encoder nodes compliant with DT bindings

Small fixes to make these DTs compliant with the adi,adv7511w and
adi,adv7513 bindings:

  r8a7745-iwg22d-sodimm-dbhd-ca.dts
  r8a7790-lager.dts
  r8a7790-stout.dts
  r8a7791-koelsch.dts
  r8a7791-porter.dts
  r8a7792-blanche.dts
  r8a7793-gose.dts
  r8a7794-silk.dts:
    Remove the adi,input-style and adi,input-justification properties.

  r8a7792-wheat.dts:
    Reorder the I2C slave addresses of hdmi@3d and hdmi@39 and remove
    the adi,input-style and adi,input-justification properties.

Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200511110611.3142-3-ricardo.canuelo@collabora.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arm64: dts: renesas: Make hdmi encoder nodes compliant with DT bindings

Small fixes to make these DTs compliant with the adi,adv7511w binding.

  r8a77970-eagle.dts,
  r8a77970-v3msk.dts,
  r8a77980-condor.dts,
  r8a77980-v3hsk.dts,
  r8a77990-ebisu.dts:
    Remove the adi,input-style and adi,input-justification properties.

  r8a77995-draak.dts:
    Reorder the I2C slave addresses of the hdmi-encoder@39 node and
    remove the adi,input-style and adi,input-justification properties.

Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200511110611.3142-2-ricardo.canuelo@collabora.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

x86/unwind/orc: Fix error handling in __unwind_start()

The unwind_state 'error' field is used to inform the reliable unwinding
code that the stack trace can't be trusted. Set this field for all
errors in __unwind_start().

Also, move the zeroing out of the unwind_state struct to before the ORC
table initialization check, to prevent the caller from reading
uninitialized data if the ORC table is corrupted.

Fixes: af085d9084b4 ("stacktrace/x86: add function for detecting reliable stack traces")
Fixes: d3a09104018c ("x86/unwinder/orc: Dont bail on stack overflow")
Fixes: 98d0c8ebf77e ("x86/unwind/orc: Prevent unwinding before ORC initialization")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/d6ac7215a84ca92b895fdd2e1aa546729417e6e6.1589487277.git.jpoimboe@redhat.com

Merge tag 'drm-misc-fixes-2020-05-14' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

Just one meson patch this time to propagate an error code

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514073538.wvdtv5s2mt4wdrdj@gilmour.lan

Merge tag 'drm-intel-fixes-2020-05-13-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Handle idling during i915_gem_evict_something busy loops (Chris)
- Mark current submissions with a weak-dependency (Chris)
- Propagate errror from completed fences (Chris)
- Fixes on execlist to avoid GPU hang situation (Chris)
- Fixes couple deadlocks (Chris)
- Timeslice preemption fixes (Chris)
- Fix Display Port interrupt handling on Tiger Lake (Imre)
- Reduce debug noise around Frame Buffer Compression
+(Peter)
- Fix logic around IPC W/a for Coffee Lake and Kaby Lake
+(Sultan)
- Avoid dereferencing a dead context (Chris)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514040235.GA2164266@intel.com

MAINTAINERS: Mark networking drivers as Maintained.

Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipmr: Add lockdep expression to ipmr_for_each_table macro

During the initialization process, ipmr_new_table() is called
to create new tables which in turn calls ipmr_get_table() which
traverses net->ipv4.mr_tables without holding the writer lock.
However, this is safe to do so as no tables exist at this time.
Hence add a suitable lockdep expression to silence the following
false-positive warning:

=============================
WARNING: suspicious RCU usage
5.7.0-rc3-next-20200428-syzkaller #0 Not tainted
-----------------------------
net/ipv4/ipmr.c:136 RCU-list traversed in non-reader section!!

ipmr_get_table+0x130/0x160 net/ipv4/ipmr.c:136
ipmr_new_table net/ipv4/ipmr.c:403 [inline]
ipmr_rules_init net/ipv4/ipmr.c:248 [inline]
ipmr_net_init+0x133/0x430 net/ipv4/ipmr.c:3089

Fixes: f0ad0860d01e ("ipv4: ipmr: support multiple tables")
Reported-by: syzbot+1519f497f2f9f08183c6@syzkaller.appspotmail.com
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipmr: Fix RCU list debugging warning

ipmr_for_each_table() macro uses list_for_each_entry_rcu()
for traversing outside of an RCU read side critical section
but under the protection of rtnl_mutex. Hence, add the
corresponding lockdep expression to silence the following
false-positive warning at boot:

[    4.319347] =============================
[    4.319349] WARNING: suspicious RCU usage
[    4.319351] 5.5.4-stable #17 Tainted: G            E
[    4.319352] -----------------------------
[    4.319354] net/ipv4/ipmr.c:1757 RCU-list traversed in non-reader section!!

Fixes: f0ad0860d01e ("ipv4: ipmr: support multiple tables")
Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers: net: hamradio: Fix suspicious RCU usage warning in bpqether.c

This patch fixes the following warning:
=============================
WARNING: suspicious RCU usage
5.7.0-rc5-next-20200514-syzkaller #0 Not tainted
-----------------------------
drivers/net/hamradio/bpqether.c:149 RCU-list traversed in non-reader section!!

Since rtnl lock is held, pass this cond in list_for_each_entry_rcu().

Reported-by: syzbot+bb82cafc737c002d11ca@syzkaller.appspotmail.com
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: broadcom: fix BCM54XX_SHD_SCR3_TRDDAPD value for BCM54810

Set the correct bit when checking for PHY_BRCM_DIS_TXCRXC_NOENRGY on the
BCM54810 PHY.

Fixes: 0ececcfc9267 ("net: phy: broadcom: Allow BCM54810 to use bcm54xx_adjust_rxrefclk()")
Signed-off-by: Kevin Lo <kevlo@kevlo.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cifs: fix leaked reference on requeued write

Failed async writes that are requeued may not clean up a refcount
on the file, which can result in a leaked open. This scenario arises
very reliably when using persistent handles and a reconnect occurs
while writing.

cifs_writev_requeue only releases the reference if the write fails
(rc != 0). The server->ops->async_writev operation will take its own
reference, so the initial reference can always be released.

Signed-off-by: Adam McCoy <adam@forsedomani.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

NFSv3: fix rpc receive buffer size for MOUNT call

Prior to commit e3d3ab64dd66 ("SUNRPC: Use au_rslack when
computing reply buffer size"), there was enough slack in the reply
buffer to commodate filehandles of size 60bytes. However, the real
problem was that the reply buffer size for the MOUNT operation was
not correctly calculated. Received buffer size used the filehandle
size for NFSv2 (32bytes) which is much smaller than the allowed
filehandle size for the v3 mounts.

Fix the reply buffer size (decode arguments size) for the MNT command.

Fixes: 2c94b8eca1a2 ("SUNRPC: Use au_rslack when computing reply buffer size")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

tcp: fix error recovery in tcp_zerocopy_receive()

If user provides wrong virtual address in TCP_ZEROCOPY_RECEIVE
operation we want to return -EINVAL error.

But depending on zc->recv_skip_hint content, we might return
-EIO error if the socket has SOCK_DONE set.

Make sure to return -EINVAL in this case.

BUG: KMSAN: uninit-value in tcp_zerocopy_receive net/ipv4/tcp.c:1833 [inline]
BUG: KMSAN: uninit-value in do_tcp_getsockopt+0x4494/0x6320 net/ipv4/tcp.c:3685
CPU: 1 PID: 625 Comm: syz-executor.0 Not tainted 5.7.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x220 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121
__msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
tcp_zerocopy_receive net/ipv4/tcp.c:1833 [inline]
do_tcp_getsockopt+0x4494/0x6320 net/ipv4/tcp.c:3685
tcp_getsockopt+0xf8/0x1f0 net/ipv4/tcp.c:3728
sock_common_getsockopt+0x13f/0x180 net/core/sock.c:3131
__sys_getsockopt+0x533/0x7b0 net/socket.c:2177
__do_sys_getsockopt net/socket.c:2192 [inline]
__se_sys_getsockopt+0xe1/0x100 net/socket.c:2189
__x64_sys_getsockopt+0x62/0x80 net/socket.c:2189
do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:297
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45c829
Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f1deeb72c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000037
RAX: ffffffffffffffda RBX: 00000000004e01e0 RCX: 000000000045c829
RDX: 0000000000000023 RSI: 0000000000000006 RDI: 0000000000000009
RBP: 000000000078bf00 R08: 0000000020000200 R09: 0000000000000000
R10: 00000000200001c0 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000001d8 R14: 00000000004d3038 R15: 00007f1deeb736d4

Local variable ----zc@do_tcp_getsockopt created at:
do_tcp_getsockopt+0x1a74/0x6320 net/ipv4/tcp.c:3670
do_tcp_getsockopt+0x1a74/0x6320 net/ipv4/tcp.c:3670

Fixes: 05255b823a61 ("tcp: add TCP_ZEROCOPY_RECEIVE support for zerocopy receive")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

char: ipmi: convert to use i2c_new_client_device()

Move away from the deprecated API.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Message-Id: <20200326210958.13051-2-wsa+renesas@sang-engineering.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>

SUNRPC: 'Directory with parent 'rpc_clnt' already present!'

Each rpc_client has a cl_clid which is allocated from a global ida, and
a debugfs directory which is named after cl_clid.

We're releasing the cl_clid before we free the debugfs directory named
after it. As soon as the cl_clid is released, that value is available
for another newly created client.

That leaves a window where another client may attempt to create a new
debugfs directory with the same name as the not-yet-deleted debugfs
directory from the dying client. Symptoms are log messages like

Directory 4 with parent 'rpc_clnt' already present!

Fixes: 7c4310ff5642 "SUNRPC: defer slow parts of rpc_free_client() to a workqueue."
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Merge tag 'mmc-v5.7-rc4' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
"MMC core:
   - Fix a couple of quite severe issues for the CQE request path

  MMC host:
   - alcor: Fix a resource leak in the error path for ->probe()
   - sdhci-acpi: Fix the DMA support for the AMD eMMC v5.0 variant
   - sdhci-pci-gli: Fix system resume support for GL975x
   - sdhci-pci-gli: Fix reboot error for GL9750"

* tag 'mmc-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-acpi: Add SDHCI_QUIRK2_BROKEN_64_BIT_DMA for AMDI0040
  mmc: block: Fix request completion in the CQE timeout path
  mmc: core: Fix recursive locking issue in CQE recovery path
  mmc: core: Check request type before completing the request
  mmc: sdhci-pci-gli: Fix can not access GL9750 after reboot from Windows 10
  mmc: alcor: Fix a resource leak in the error path for ->probe()
  mmc: sdhci-pci-gli: Fix no irq handler from suspend

Merge git://git./pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Fix gcc-10 compilation warning in nf_conntrack, from Arnd Bergmann.

2) Add NF_FLOW_HW_PENDING to avoid races between stats and deletion
commands, from Paul Blakey.

3) Remove WQ_MEM_RECLAIM from the offload workqueue, from Roi Dayan.

4) Infinite loop when removing nf_conntrack module, from Florian Westphal.

5) Set NF_FLOW_TEARDOWN bit on expiration to avoid races when refreshing
the timeout from the software path.

6) Missing nft_set_elem_expired() check in the rbtree, from Phil Sutter.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: Add Jakub to networking drivers.

Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: another add of Karsten Graul for S390 networking

Complete adding of Karsten as maintainer for all S390 networking
parts in the kernel.

Cc: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers: ipa: fix typos for ipa_smp2p structure doc

Remove the duplicate "mutex", and change "Motex" to "Mutex". Also I
recommend it's easier for understanding to make the "ready-interrupt"
a bundle for it is a parallel description as "shutdown" which is appended
after the slash.

Signed-off-by: Wang Wenhu <wenhu.wang@vivo.com>
Cc: Alex Elder <elder@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

pppoe: only process PADT targeted at local interfaces

We don't want to disconnect a session because of a stray PADT arriving
while the interface is in promiscuous mode.
Furthermore, multicast and broadcast packets make no sense here, so
only PACKET_HOST is accepted.

Reported-by: David Balažic <xerces9@gmail.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests/bpf: Enforce returning 0 for fentry/fexit programs

There are a few fentry/fexit programs returning non-0.
The tests with these programs will break with the previous
patch which enfoced return-0 rules. Fix them properly.

Fixes: ac065870d928 ("selftests/bpf: Add BPF_PROG, BPF_KPROBE, and BPF_KRETPROBE macros")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200514053207.1298479-1-yhs@fb.com

bpf: Enforce returning 0 for fentry/fexit progs

Currently, tracing/fentry and tracing/fexit prog
return values are not enforced. In trampoline codes,
the fentry/fexit prog return values are ignored.
Let us enforce it to be 0 to avoid confusion and
allows potential future extension.

This patch also explicitly added return value
checking for tracing/raw_tp, tracing/fmod_ret,
and freplace programs such that these program
return values can be anything. The purpose are
two folds:
1. to make it explicit about return value expectations
    for these programs in verifier.
2. for tracing prog_type, if a future attach type
    is added, the default is -ENOTSUPP which will
    enforce to specify return value ranges explicitly.

Fixes: fec56f5890d9 ("bpf: Introduce BPF trampoline")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200514053206.1298415-1-yhs@fb.com

net: stmmac: fix num_por initialization

Driver missed initializing num_por which is one of the por values that
driver configures to hardware. In order to get these values, add a new
structure ethqos_emac_driver_data which holds por and num_por values
and populate that in driver probe.

Fixes: a7c30e62d4b8 ("net: stmmac: Add driver for Qualcomm ethqos")
Reported-by: Rahul Ankushrao Kawadgave <rahulak@qti.qualcomm.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

security: Fix the default value of secid_to_secctx hook

security_secid_to_secctx is called by the bpf_lsm hook and a successful
return value (i.e 0) implies that the parameter will be consumed by the
LSM framework. The current behaviour return success when the pointer
isn't initialized when CONFIG_BPF_LSM is enabled, with the default
return from kernel/bpf/bpf_lsm.c.

This is the internal error:

[ 1229.341488][ T2659] usercopy: Kernel memory exposure attempt detected from null address (offset 0, size 280)!
[ 1229.374977][ T2659] ------------[ cut here ]------------
[ 1229.376813][ T2659] kernel BUG at mm/usercopy.c:99!
[ 1229.378398][ T2659] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 1229.380348][ T2659] Modules linked in:
[ 1229.381654][ T2659] CPU: 0 PID: 2659 Comm: systemd-journal Tainted: G    B   W         5.7.0-rc5-next-20200511-00019-g864e0c6319b8-dirty #13
[ 1229.385429][ T2659] Hardware name: linux,dummy-virt (DT)
[ 1229.387143][ T2659] pstate: 80400005 (Nzcv daif +PAN -UAO BTYPE=--)
[ 1229.389165][ T2659] pc : usercopy_abort+0xc8/0xcc
[ 1229.390705][ T2659] lr : usercopy_abort+0xc8/0xcc
[ 1229.392225][ T2659] sp : ffff000064247450
[ 1229.393533][ T2659] x29: ffff000064247460 x28: 0000000000000000
[ 1229.395449][ T2659] x27: 0000000000000118 x26: 0000000000000000
[ 1229.397384][ T2659] x25: ffffa000127049e0 x24: ffffa000127049e0
[ 1229.399306][ T2659] x23: ffffa000127048e0 x22: ffffa000127048a0
[ 1229.401241][ T2659] x21: ffffa00012704b80 x20: ffffa000127049e0
[ 1229.403163][ T2659] x19: ffffa00012704820 x18: 0000000000000000
[ 1229.405094][ T2659] x17: 0000000000000000 x16: 0000000000000000
[ 1229.407008][ T2659] x15: 0000000000000000 x14: 003d090000000000
[ 1229.408942][ T2659] x13: ffff80000d5b25b2 x12: 1fffe0000d5b25b1
[ 1229.410859][ T2659] x11: 1fffe0000d5b25b1 x10: ffff80000d5b25b1
[ 1229.412791][ T2659] x9 : ffffa0001034bee0 x8 : ffff00006ad92d8f
[ 1229.414707][ T2659] x7 : 0000000000000000 x6 : ffffa00015eacb20
[ 1229.416642][ T2659] x5 : ffff0000693c8040 x4 : 0000000000000000
[ 1229.418558][ T2659] x3 : ffffa0001034befc x2 : d57a7483a01c6300
[ 1229.420610][ T2659] x1 : 0000000000000000 x0 : 0000000000000059
[ 1229.422526][ T2659] Call trace:
[ 1229.423631][ T2659]  usercopy_abort+0xc8/0xcc
[ 1229.425091][ T2659]  __check_object_size+0xdc/0x7d4
[ 1229.426729][ T2659]  put_cmsg+0xa30/0xa90
[ 1229.428132][ T2659]  unix_dgram_recvmsg+0x80c/0x930
[ 1229.429731][ T2659]  sock_recvmsg+0x9c/0xc0
[ 1229.431123][ T2659]  ____sys_recvmsg+0x1cc/0x5f8
[ 1229.432663][ T2659]  ___sys_recvmsg+0x100/0x160
[ 1229.434151][ T2659]  __sys_recvmsg+0x110/0x1a8
[ 1229.435623][ T2659]  __arm64_sys_recvmsg+0x58/0x70
[ 1229.437218][ T2659]  el0_svc_common.constprop.1+0x29c/0x340
[ 1229.438994][ T2659]  do_el0_svc+0xe8/0x108
[ 1229.440587][ T2659]  el0_svc+0x74/0x88
[ 1229.441917][ T2659]  el0_sync_handler+0xe4/0x8b4
[ 1229.443464][ T2659]  el0_sync+0x17c/0x180
[ 1229.444920][ T2659] Code: aa1703e2 aa1603e1 910a8260 97ecc860 (d4210000)
[ 1229.447070][ T2659] ---[ end trace 400497d91baeaf51 ]---
[ 1229.448791][ T2659] Kernel panic - not syncing: Fatal exception
[ 1229.450692][ T2659] Kernel Offset: disabled
[ 1229.452061][ T2659] CPU features: 0x240002,20002004
[ 1229.453647][ T2659] Memory Limit: none
[ 1229.455015][ T2659] ---[ end Kernel panic - not syncing: Fatal exception ]---

Rework the so the default return value is -EOPNOTSUPP.

There are likely other callbacks such as security_inode_getsecctx() that
may have the same problem, and that someone that understand the code
better needs to audit them.

Thank you Arnd for helping me figure out what went wrong.

Fixes: 98e828a0650f ("security: Refactor declaration of LSM hooks")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/bpf/20200512174607.9630-1-anders.roxell@linaro.org

libbpf: Fix register naming in PT_REGS s390 macros

Fix register naming in PT_REGS s390 macros

Fixes: b8ebce86ffe6 ("libbpf: Provide CO-RE variants of PT_REGS macros")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200513154414.29972-1-sumanthk@linux.ibm.com

bpf: Fix bug in mmap() implementation for BPF array map

mmap() subsystem allows user-space application to memory-map region with
initial page offset. This wasn't taken into account in initial implementation
of BPF array memory-mapping. This would result in wrong pages, not taking into
account requested page shift, being memory-mmaped into user-space. This patch
fixes this gap and adds a test for such scenario.

Fixes: fc9702273e2e ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200512235925.3817805-1-andriin@fb.com

samples: bpf: Fix build error

GCC 10 is very strict about symbol clash, and lwt_len_hist_user contains
a symbol which clashes with libbpf:

/usr/bin/ld: samples/bpf/lwt_len_hist_user.o:(.bss+0x0): multiple definition of `bpf_log_buf'; samples/bpf/bpf_load.o:(.bss+0x8c0): first defined here
collect2: error: ld returned 1 exit status

bpf_log_buf here seems to be a leftover, so removing it.

Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200511113234.80722-1-mcroce@redhat.com

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"7 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  kasan: add missing functions declarations to kasan.h
  kasan: consistently disable debugging features
  ipc/util.c: sysvipc_find_ipc() incorrectly updates position index
  userfaultfd: fix remap event with MREMAP_DONTUNMAP
  mm/gup: fix fixup_user_fault() on multiple retries
  epoll: call final ep_events_available() check under the lock
  mm, memcg: fix inconsistent oom event behavior

Merge tag 'for-linus-2020-05-13' of git://git./linux/kernel/git/brauner/linux

Pull thread fix from Christian Brauner:
"This contains a single fix for all exported legacy fork helpers to
  block accidental access to clone3() features in the upper 32 bits of
  their respective flags arguments.

  I got Cced on a glibc issue where someone reported consistent failures
  for the legacy clone() syscall on ppc64le when sign extension was
  performed (since the clone() syscall in glibc exposes the flags
  argument as an int whereas the kernel uses unsigned long).

  The legacy clone() syscall is odd in a bunch of ways and here two
  things interact:

   - First, legacy clone's flag argument is word-size dependent, i.e.
     it's an unsigned long whereas most system calls with flag arguments
     use int or unsigned int.

   - Second, legacy clone() ignores unknown and deprecated flags.

  The two of them taken together means that users on 64bit systems can
  pass garbage for the upper 32bit of the clone() syscall since forever
  and things would just work fine.

  The following program compiled on a 64bit kernel prior to v5.7-rc1
  will succeed and will fail post v5.7-rc1 with EBADF:

    int main(int argc, char *argv[])
    {
          pid_t pid;

          /* Note that legacy clone() has different argument ordering on
           * different architectures so this won't work everywhere.
           *
           * Only set the upper 32 bits.
           */
          pid = syscall(__NR_clone, 0xffffffff00000000 | SIGCHLD,
                        NULL, NULL, NULL, NULL);
          if (pid < 0)
                  exit(EXIT_FAILURE);
          if (pid == 0)
                  exit(EXIT_SUCCESS);
          if (wait(NULL) != pid)
                  exit(EXIT_FAILURE);

          exit(EXIT_SUCCESS);
    }

  Since legacy clone() couldn't be extended this was not a problem so
  far and nobody really noticed or cared since nothing in the kernel
  ever bothered to look at the upper 32 bits.

  But once we introduced clone3() and expanded the flag argument in
  struct clone_args to 64 bit we opened this can of worms. With the
  first flag-based extension to clone3() making use of the upper 32 bits
  of the flag argument we've effectively made it possible for the legacy
  clone() syscall to reach clone3() only flags on accident. The sign
  extension scenario is just the odd corner-case that we needed to
  figure this out.

  The reason we just realized this now and not already when we
  introduced CLONE_CLEAR_SIGHAND was that CLONE_INTO_CGROUP assumes that
  a valid cgroup file descriptor has been given - whereas
  CLONE_CLEAR_SIGHAND doesn't need to verify anything. It just silently
  resets the signal handlers to SIG_DFL.

  So the sign extension (or the user accidently passing garbage for the
  upper 32 bits) caused the CLONE_INTO_CGROUP bit to be raised and the
  kernel to error out when it didn't find a valid cgroup file
  descriptor.

  Note, I'm also capping kernel_thread()'s flag argument mainly because
  none of the new features make sense for kernel_thread() and we
  shouldn't risk them being accidently activated however unlikely. If we
  wanted to, we could even make kernel_thread() yell when an unknown
  flag has been set which it doesn't do right now. But it's not worth
  risking this in a bugfix imho"

* tag 'for-linus-2020-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  fork: prevent accidental access to clone3 features

Merge tag 'trace-v5.7-rc5' of git://git./linux/kernel/git/rostedt/linux-trace

Pull more tracing fixes from Steven Rostedt:
"Various tracing fixes:

   - Fix a crash when having function tracing and function stack tracing
     on the command line.

     The ftrace trampolines are created as executable and read only. But
     the stack tracer tries to modify them with text_poke() which
     expects all kernel text to still be writable at boot. Keep the
     trampolines writable at boot, and convert them to read-only with
     the rest of the kernel.

   - A selftest was triggering in the ring buffer iterator code, that is
     no longer valid with the update of keeping the ring buffer writable
     while a iterator is reading.

     Just bail after three failed attempts to get an event and remove
     the warning and disabling of the ring buffer.

   - While modifying the ring buffer code, decided to remove all the
     unnecessary BUG() calls"

* tag 'trace-v5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ring-buffer: Remove all BUG() calls
  ring-buffer: Don't deactivate the ring buffer on failed iterator reads
  x86/ftrace: Have ftrace trampolines turn read-only at the end of system boot up

Merge tag 'pm-5.7-rc6' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fix from Rafael Wysocki:
"Prevent the suspend-to-idle internal loop from busy spinning after a
spurious ACPI SCI wakeup in some cases"

* tag 'pm-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: PM: Avoid premature returns from acpi_s2idle_wake()

kasan: add missing functions declarations to kasan.h

KASAN is currently missing declarations for __asan_report* and __hwasan*
functions. This can lead to compiler warnings.

Reported-by: Leon Romanovsky <leon@kernel.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Leon Romanovsky <leon@kernel.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Link: http://lkml.kernel.org/r/45b445a76a79208918f0cc44bfabebaea909b54d.1589297433.git.andreyknvl@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: consistently disable debugging features

KASAN is incompatible with some kernel debugging/tracing features.

There's been multiple patches that disable those feature for some of
KASAN files one by one. Instead of prolonging that, disable these
features for all KASAN files at once.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Link: http://lkml.kernel.org/r/29bd753d5ff5596425905b0b07f51153e2345cc1.1589297433.git.andreyknvl@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc/util.c: sysvipc_find_ipc() incorrectly updates position index

Commit 89163f93c6f9 ("ipc/util.c: sysvipc_find_ipc() should increase
position index") is causing this bug (seen on 5.6.8):

   # ipcs -q

   ------ Message Queues --------
   key        msqid      owner      perms      used-bytes   messages

   # ipcmk -Q
   Message queue id: 0
   # ipcs -q

   ------ Message Queues --------
   key        msqid      owner      perms      used-bytes   messages
   0x82db8127 0          root       644        0            0

   # ipcmk -Q
   Message queue id: 1
   # ipcs -q

   ------ Message Queues --------
   key        msqid      owner      perms      used-bytes   messages
   0x82db8127 0          root       644        0            0
   0x76d1fb2a 1          root       644        0            0

   # ipcrm -q 0
   # ipcs -q

   ------ Message Queues --------
   key        msqid      owner      perms      used-bytes   messages
   0x76d1fb2a 1          root       644        0            0
   0x76d1fb2a 1          root       644        0            0

   # ipcmk -Q
   Message queue id: 2
   # ipcrm -q 2
   # ipcs -q

   ------ Message Queues --------
   key        msqid      owner      perms      used-bytes   messages
   0x76d1fb2a 1          root       644        0            0
   0x76d1fb2a 1          root       644        0            0

   # ipcmk -Q
   Message queue id: 3
   # ipcrm -q 1
   # ipcs -q

   ------ Message Queues --------
   key        msqid      owner      perms      used-bytes   messages
   0x7c982867 3          root       644        0            0
   0x7c982867 3          root       644        0            0
   0x7c982867 3          root       644        0            0
   0x7c982867 3          root       644        0            0

Whenever an IPC item with a low id is deleted, the items with higher ids
are duplicated, as if filling a hole.

new_pos should jump through hole of unused ids, pos can be updated
inside "for" cycle.

Fixes: 89163f93c6f9 ("ipc/util.c: sysvipc_find_ipc() should increase position index")
Reported-by: Andreas Schwab <schwab@suse.de>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/4921fe9b-9385-a2b4-1dc4-1099be6d2e39@virtuozzo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

userfaultfd: fix remap event with MREMAP_DONTUNMAP

A user is not required to set a new address when using MREMAP_DONTUNMAP
as it can be used without MREMAP_FIXED. When doing so the remap event
will use new_addr which may not have been set and we didn't propagate it
back other then in the return value of remap_to.

Because ret is always the new address it's probably more correct to use
it rather than new_addr on the remap_event_complete call, and it
resolves this bug.

Fixes: e346b3813067d4b ("mm/mremap: add MREMAP_DONTUNMAP to mremap()")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Brian Geffon <bgeffon@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Michael S . Tsirkin" <mst@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Link: http://lkml.kernel.org/r/20200506172158.218366-1-bgeffon@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/gup: fix fixup_user_fault() on multiple retries

This part was overlooked when reworking the gup code on multiple
retries.

When we get the 2nd+ retry, we'll be with TRIED flag set. Current code
will bail out on the 2nd retry because the !TRIED check will fail so the
retry logic will be skipped. What's worse is that, it will also return
zero which errornously hints the caller that the page is faulted in
while it's not.

The !TRIED flag check seems to not be needed even before the mutliple
retries change because if we get a VM_FAULT_RETRY, it must be the 1st
retry, and we should not have TRIED set for that.

Fix it by removing the !TRIED check, at the meantime check against fatal
signals properly before the page fault so we can still properly respond
to the user killing the process during retries.

Fixes: 4426e945df58 ("mm/gup: allow VM_FAULT_RETRY for multiple times")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Brian Geffon <bgeffon@google.com>
Link: http://lkml.kernel.org/r/20200502003523.8204-1-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

epoll: call final ep_events_available() check under the lock

There is a possible race when ep_scan_ready_list() leaves ->rdllist and
->obflist empty for a short period of time although some events are
pending.  It is quite likely that ep_events_available() observes empty
lists and goes to sleep.

Since commit 339ddb53d373 ("fs/epoll: remove unnecessary wakeups of
nested epoll") we are conservative in wakeups (there is only one place
for wakeup and this is ep_poll_callback()), thus ep_events_available()
must always observe correct state of two lists.

The easiest and correct way is to do the final check under the lock.
This does not impact the performance, since lock is taken anyway for
adding a wait entry to the wait queue.

The discussion of the problem can be found here:

   https://lore.kernel.org/linux-fsdevel/a2f22c3c-c25a-4bda-8339-a7bdaf17849e@akamai.com/

In this patch barrierless __set_current_state() is used.  This is safe
since waitqueue_active() is called under the same lock on wakeup side.

Short-circuit for fatal signals (i.e.  fatal_signal_pending() check) is
moved to the line just before actual events harvesting routine.  This is
fully compliant to what is said in the comment of the patch where the
actual fatal_signal_pending() check was added: c257a340ede0 ("fs, epoll:
short circuit fetching events if thread has been killed").

Fixes: 339ddb53d373 ("fs/epoll: remove unnecessary wakeups of nested epoll")
Reported-by: Jason Baron <jbaron@akamai.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jason Baron <jbaron@akamai.com>
Cc: Khazhismel Kumykov <khazhy@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200505145609.1865152-1-rpenyaev@suse.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, memcg: fix inconsistent oom event behavior

A recent commit 9852ae3fe529 ("mm, memcg: consider subtrees in
memory.events") changed the behavior of memcg events, which will now
consider subtrees in memory.events.

But oom_kill event is a special one as it is used in both cgroup1 and
cgroup2.  In cgroup1, it is displayed in memory.oom_control.  The file
memory.oom_control is in both root memcg and non root memcg, that is
different with memory.event as it only in non-root memcg.  That commit
is okay for cgroup2, but it is not okay for cgroup1 as it will cause
inconsistent behavior between root memcg and non-root memcg.

Here's an example on why this behavior is inconsistent in cgroup1.

       root memcg
       /
    memcg foo
     /
  memcg bar

Suppose there's an oom_kill in memcg bar, then the oon_kill will be

       root memcg : memory.oom_control(oom_kill)  0
       /
    memcg foo : memory.oom_control(oom_kill)  1
     /
  memcg bar : memory.oom_control(oom_kill)  1

For the non-root memcg, its memory.oom_control(oom_kill) includes its
descendants' oom_kill, but for root memcg, it doesn't include its
descendants' oom_kill.  That means, memory.oom_control(oom_kill) has
different meanings in different memcgs.  That is inconsistent.  Then the
user has to know whether the memcg is root or not.

If we can't fully support it in cgroup1, for example by adding
memory.events.local into cgroup1 as well, then let's don't touch its
original behavior.

Fixes: 9852ae3fe529 ("mm, memcg: consider subtrees in memory.events")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200502141055.7378-1-laoar.shao@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

USB: usbfs: fix mmap dma mismatch

In commit 2bef9aed6f0e ("usb: usbfs: correct kernel->user page attribute
mismatch") we switched from always calling remap_pfn_range() to call
dma_mmap_coherent() to handle issues with systems with non-coherent USB host
controller drivers. Unfortunatly, as syzbot quickly told us, not all the world
is host controllers with DMA support, so we need to check what host controller
we are attempting to talk to before doing this type of allocation.

Thanks to Christoph for the quick idea of how to fix this.

Fixes: 2bef9aed6f0e ("usb: usbfs: correct kernel->user page attribute mismatch")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot+353be47c9ce21b68b7ed@syzkaller.appspotmail.com
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20200514112711.1858252-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

csky: Fixup raw_copy_from_user()

If raw_copy_from_user(to, from, N) returns K, callers expect
the first N - K bytes starting at to to have been replaced with
the contents of corresponding area starting at from and the last
K bytes of destination *left* *unmodified*.

What arch/sky/lib/usercopy.c is doing is broken - it can lead to e.g.
data corruption on write(2).

raw_copy_to_user() is inaccurate about return value, which is a bug,
but consequences are less drastic than for raw_copy_from_user().
And just what are those access_ok() doing in there?  I mean, look into
linux/uaccess.h; that's where we do that check (as well as zero tail
on failure in the callers that need zeroing).

AFAICS, all of that shouldn't be hard to fix; something like a patch
below might make a useful starting point.

I would suggest moving these macros into usercopy.c (they are never
used anywhere else) and possibly expanding them there; if you leave
them alive, please at least rename __copy_user_zeroing(). Again,
it must not zero anything on failed read.

Said that, I'm not sure we won't be better off simply turning
usercopy.c into usercopy.S - all that is left there is a couple of
functions, each consisting only of inline asm.

Guo Ren reply:

Yes, raw_copy_from_user is wrong, it's no need zeroing code.

unsigned long _copy_from_user(void *to, const void __user *from,
unsigned long n)
{
        unsigned long res = n;
        might_fault();
        if (likely(access_ok(from, n))) {
                kasan_check_write(to, n);
                res = raw_copy_from_user(to, from, n);
        }
        if (unlikely(res))
                memset(to + (n - res), 0, res);
        return res;
}
EXPORT_SYMBOL(_copy_from_user);

You are right and access_ok() should be removed.

but, how about:
do {
...
        "2:     stw     %3, (%1, 0)     \n"             \
+       "       subi    %0, 4          \n"               \
        "9:     stw     %4, (%1, 4)     \n"             \
+       "       subi    %0, 4          \n"               \
        "10:    stw     %5, (%1, 8)     \n"             \
+       "       subi    %0, 4          \n"               \
        "11:    stw     %6, (%1, 12)    \n"             \
+       "       subi    %0, 4          \n"               \
        "       addi    %2, 16          \n"             \
        "       addi    %1, 16          \n"             \

Don't expand __ex_table

AI Viro reply:

Hey, I've no idea about the instruction scheduling on csky -
if that doesn't slow the things down, all the better.  It's just
that copy_to_user() and friends are on fairly hot codepaths,
and in quite a few situations they will dominate the speed of
e.g. read(2).  So I tried to keep the fast path unchanged.
Up to the architecture maintainers, obviously.  Which would be
you...

As for the fixups size increase (__ex_table size is unchanged)...
You have each of those macros expanded exactly once.
So the size is not a serious argument, IMO - useless complexity
would be, if it is, in fact, useless; the size... not really,
especially since those extra subi will at least offset it.

Again, up to you - asm optimizations of (essentially)
memcpy()-style loops are tricky and can depend upon the
fairly subtle details of architecture.  So even on something
I know reasonably well I would resort to direct experiments
if I can't pass the buck to architecture maintainers.

It *is* worth optimizing - this is where read() from a file
that is already in page cache spends most of the time, etc.

Guo Ren reply:

Thx, after fixup some typo “sub %0, 4”, apply the patch.

TODO:
- user copy/from codes are still need optimizing.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>

csky: Fixup gdbmacros.txt with name sp in thread_struct

The gdbmacros.txt use sp in thread_struct, but csky use ksp. This
cause bttnobp fail to excute.

TODO:
- Still couldn't display the contents of stack.

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>

ALSA: hda/realtek - Limit int mic boost for Thinkpad T530

Lenovo Thinkpad T530 seems to have a sensitive internal mic capture
that needs to limit the mic boost like a few other Thinkpad models.
Although we may change the quirk for ALC269_FIXUP_LENOVO_DOCK, this
hits way too many other laptop models, so let's add a new fixup model
that limits the internal mic boost on top of the existing quirk and
apply to only T530.

BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1171293
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200514160533.10337-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

cifs: Fix null pointer check in cifs_read

Coverity scan noted a redundant null check

Coverity-id: 728517
Reported-by: Coverity <scan-admin@coverity.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Shyam Prasad N <nspmangalore@gmail.com>