drm/panfrost: Handle HW_ISSUE_TTRX_2968_TTRX_3162

Add handling for the HW_ISSUE_TTRX_2968_TTRX_3162 quirk. Logic ported
from kbase. kbase lists this workaround as used on Mali-G57.

Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220525145754.25866-3-alyssa.rosenzweig@collabora.com

dt-bindings: Add compatible for Mali Valhall (JM)

From the kernel's perspective, (pre-CSF, "Job Manager") Valhall is more
or less compatible with Bifrost, although they differ to userspace. Add
a compatible for Valhall to the existing Bifrost bindings documentation.

As the first SoC with a Valhall GPU receiving mainline support, add a
specific compatible for the MediaTek MT8192, which instantiates a
Mali-G57.

v2: Change compatible to arm,mali-valhall-jm (Daniel Stone).

CC: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220525145754.25866-2-alyssa.rosenzweig@collabora.com

drm: bridge: icn6211: Adjust clock phase using SYS_CTRL_1

The code from [1] sets SYS_CTRL_1 to different values depending on the
desired clock phase (0, 1/4, 1/2 or 3/4). A clock phase of 0 aligns the
positive edge of the clock with the pixel data while other values delay
the clock by a fraction of the clock period. A clock phase of 1/2 aligns
the negative edge of the clock with the pixel data.

The driver currently hard codes SYS_CTRL_1 to 0x88 which corresponds to
aligning the positive edge of the clock with the pixel data. This won't
work correctly for panels that require aligning the negative edge of the
clock with the pixel data.

Adjust the clock phase to 0 if DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE is
present in bus_flags, otherwise adjust the clock phase to 1/2 as
appropriate for DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE.

[1] https://github.com/tdjastrzebski/ICN6211-Configurator

Signed-off-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220523130144.444225-1-net147@gmail.com

dt-bindings: display: ingenic,jz4780-hdmi: Drop undocumented 'ddc-i2c-bus'

While 'ddc-i2c-bus' is a common property, it should be in a connector
node rather than the HDMI bridge node as the I2C bus goes to a
connector and not the HDMI block. Drop it from the example.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220525205626.2482584-1-robh@kernel.org

drm: bridge: adv7511: Move CEC definitions to adv7511_cec.c

ADV7511_REG_CEC_RX_FRAME_HDR[] and ADV7511_REG_CEC_RX_FRAME_LEN[]
are only used inside adv7511_cec.c.

Move their definitions to this file to avoid the following build
warnings when CONFIG_DRM_I2C_ADV7511_CEC is not selected:

drivers/gpu/drm/bridge/adv7511/adv7511.h:229:17: warning: 'ADV7511_REG_CEC_RX_FRAME_HDR' defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/bridge/adv7511/adv7511.h:235:17: warning: 'ADV7511_REG_CEC_RX_FRAME_LEN' defined but not used [-Wunused-const-variable=]

Reported-by: kernel test robot <lkp@intel.com>
Fixes: ab0af093bf90 ("drm: bridge: adv7511: use non-legacy mode for CEC RX")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220525215316.1133057-1-festevam@gmail.com

drm/vkms: Update vkms_composer_worker documentation

Since commit ba420afab565 ("drm/vkms: Bugfix racing hrtimer vblank
handle") the work is scheduled at vkms_vblank_simulate() and since
commit 5ef8100a3919 ("drm/vkms: flush crc workers earlier in commit
flow") the work is flushed at vkms_atomic_commit_tail(). Update function
commment to reflect that.

Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220521191342.23520-1-andrealmeid@igalia.com

drm: use ENOMEM for drmm_kzalloc allocation failures

Other callers of drmm_kzalloc already return -ENOMEM on allocation
failure. Change EINVAL to ENOMEM for consistency.

Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220521234104.88410-1-dossche.niels@gmail.com

drm/panel: Fix build error when CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20=y && CONFIG_DRM_DISPLAY_HELPER=m

If CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20=y && CONFIG_DRM_DISPLAY_HELPER=m,
bulding fails:

drivers/gpu/drm/panel/panel-samsung-atna33xc20.o: In function `atana33xc20_probe':
panel-samsung-atna33xc20.c:(.text+0x744): undefined reference to
 `drm_panel_dp_aux_backlight'
make: *** [vmlinux] Error 1

Let CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 select DRM_DISPLAY_DP_HELPER and
CONFIG_DRM_DISPLAY_HELPER to fix this error.

Fixes: 32ce3b320343 ("drm/panel: atna33xc20: Introduce the Samsung ATNA33XC20 panel")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Gao Chao <gaochao49@huawei.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220524024551.539-1-gaochao49@huawei.com

drm/nouveau/tegra: remove needless NULL check

There has already been NULL check in clk_prepare_enable() and
clk_disable_unprepare(), so remove needless NULL check before
calling them.

Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519072950.128268-1-guozhengkui@vivo.com

drm/nouveau/mmu: fix typo in comment

Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[also fix double space]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220521111145.81697-57-Julia.Lawall@inria.fr

drm/nouveau: clear output poll workers before nouveau_fbcon_destroy()

Resources needed for output poll workers are destroyed in
nouveau_fbcon_fini() before output poll workers are cleared in
nouveau_display_fini(). This means there is a time between fbcon_fini()
and display_fini(), where if output poll happens, it crashes.

This patch introduces another output poll clearing before fbcon
resources are destroyed.

BUG: KASAN: use-after-free in
__drm_fb_helper_initial_config_and_unlock.cold+0x1f3/0x291
[drm_kms_helper]

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mark Menzynski <mmenzyns@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220523113541.10562-1-mmenzyns@redhat.com

Revert "dt-bindings:drm/bridge:anx7625: add port@0 property"

This reverts commit 7328736d270aa4fa6fcd033ade02acc2874a2db5.

This patch depends on the patches just aplied to the media tree, and will
not build without them, which leaves drm-misc-next in a broken state.
Let's revert the two latter patches until rc1 has been branched,
and rc1 has been backmerged into drm-misc-next.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220523161520.354687-2-robert.foss@linaro.org

Revert "drm/bridge: anx7625: Use DPI bus type"

This reverts commit a77c2af0994e24ee36c7ffb6dc852770bdf06fb1.

This patch depends on the patches just aplied to the media tree, and will
not build without them, which leaves drm-misc-next in a broken state.
Let's revert the two latter patches until rc1 has been branched,
and rc1 has been backmerged into drm-misc-next.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220523161520.354687-1-robert.foss@linaro.org

drm/st7735r: Fix module autoloading for Okaya RH128128T

The SPI core always reports a "MODALIAS=spi:<foo>", even if the device was
registered via OF. This means that the st7735r.ko module won't autoload if
a DT has a node with a compatible "okaya,rh128128t" string.

In that case, kmod expects a "MODALIAS=of:N*T*Cokaya,rh128128t" uevent but
instead will get a "MODALIAS=spi:rh128128t", which is not present in the
list of aliases:

  $ modinfo drivers/gpu/drm/tiny/st7735r.ko | grep alias
  alias:          of:N*T*Cokaya,rh128128tC*
  alias:          of:N*T*Cokaya,rh128128t
  alias:          of:N*T*Cjianda,jd-t18003-t01C*
  alias:          of:N*T*Cjianda,jd-t18003-t01
  alias:          spi:jd-t18003-t01

To workaround this issue, add in the SPI table an entry for that device.

Fixes: d1d511d516f7 ("drm: tiny: st7735r: Add support for Okaya RH128128T")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220520091602.179078-1-javierm@redhat.com

drm/bridge: lt9611: Use both bits for HDMI sensing

In commit 19cf41b64e3b ("lontium-lt9611: check a different
register bit for HDMI sensing"), the bit flag used to detect
HDMI cable connect was switched from BIT(2) to BIT(0) to improve
compatibility with some monitors that didn't seem to set BIT(2).

However, with that change, I've seen occasional issues where the
detection failed, because BIT(2) was set, but not BIT(0).

Unfortunately, as I understand it, the bits and their function
was never clearly documented. So lets instead check both
(BIT(2) | BIT(0)) when checking the register.

Cc: Yongqin Liu <yongqin.liu@linaro.org>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: kernel-team@android.com
Fixes: 19cf41b64e3b ("lontium-lt9611: check a different register bit for HDMI sensing")
Signed-off-by: John Stultz <jstultz@google.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511012612.3297577-2-jstultz@google.com

drm/bridge: lt9611: Consolidate detection logic

This patch simply consolidates the duplicated detection
functionality in the driver.

Cc: Yongqin Liu <yongqin.liu@linaro.org>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: kernel-team@android.com
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: John Stultz <jstultz@google.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511012612.3297577-1-jstultz@google.com

drm/bridge: anx7625: Add missing of_node_put for endpoint

Add of_node_put call on the endpoint node after it is not needed.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Xin Ji <xji@analogixsemi.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519112337.62198-1-marex@denx.de

drm/bridge: ti-sn65dsi83: Handle dsi_lanes == 0 as invalid

Handle empty data-lanes = < >; property, which translates to
dsi_lanes = 0 as invalid.

Fixes: ceb515ba29ba6 ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220518233844.248504-1-marex@denx.de

drm/amd/display: Move connector debugfs to drm

As drm_connector already have the display_info, instead of creating
"output_bpc" debugfs in vendor specific driver, move the logic to
the drm layer.

This patch will also move "Current" bpc to the crtc debugfs from
connector debugfs, since we are getting this info from crtc_state.

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519095149.3560034-4-bhanuprakash.modem@intel.com

drm/i915/display/debug: Expose crtc current bpc via debugfs

This new debugfs will expose the currently using bpc by crtc.
It is very useful for verifying whether we enter the correct
output color depth from IGT.

This patch will also add the connector's max supported bpc to
"i915_display_info" debugfs.

Example:
cat /sys/kernel/debug/dri/0/crtc-0/i915_current_bpc
Current: 8

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519095149.3560034-3-bhanuprakash.modem@intel.com

drm/debug: Expose connector's max supported bpc via debugfs

It's useful to know the connector's max supported bpc for IGT
testing. Expose it via a debugfs file on the connector "output_bpc".

Example: cat /sys/kernel/debug/dri/0/DP-1/output_bpc

V2:
* Fix typo in comments (Harry)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519095149.3560034-2-bhanuprakash.modem@intel.com

drm/r128: Fix undefined behavior due to shift overflowing the constant

Fix:

  drivers/gpu/drm/r128/r128_cce.c: In function ‘r128_do_init_cce’:
  drivers/gpu/drm/r128/r128_cce.c:417:2: error: case label does not reduce to an integer constant
    case R128_PM4_64BM_64VCBM_64INDBM:
    ^~~~
  drivers/gpu/drm/r128/r128_cce.c:418:2: error: case label does not reduce to an integer constant
    case R128_PM4_64PIO_64VCPIO_64INDPIO:
    ^~~~

See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.

Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405151517.29753-5-bp@alien8.de

drm/bridge: tc358767: Make sure Refclk clock are enabled

The Refclk may be supplied by SoC clock output instead of crystal
oscillator, make sure the clock are enabled before any other action
is performed with the bridge chip, otherwise it may either fail to
operate at all, or miss reset GPIO toggle.

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Fixes: 7caff0fc4296e ("drm/bridge: tc358767: Add DPI to eDP bridge driver")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220520121543.11550-1-marex@denx.de

drm/bridge: tc358767: Report DSI-to-(e)DP as supported

The DSI-to-e(DP) mode is now supported, update the driver comment
to reflect this. No functional change.

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Fixes: 3080c21a043ab ("drm/bridge: tc358767: Add DSI-to-(e)DP mode support")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519095137.11896-2-marex@denx.de

drm/bridge: tc358767: Handle dsi_lanes == 0 as invalid

Handle empty data-lanes = < >; property, which translates to
dsi_lanes = 0 as invalid.

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Fixes: bbfd3190b6562 ("drm/bridge: tc358767: Add DSI-to-DPI mode support")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519095137.11896-1-marex@denx.de

drm/dp: Export symbol / kerneldoc fixes for DP AUX bus

While working on the DP AUX bus code I found a few small things that
should be fixed. Namely the non-devm version of
of_dp_aux_populate_ep_devices() was missing an export. There was also
an extra blank line in a kerneldoc and a kerneldoc that incorrectly
documented a return value. Fix these.

Fixes: aeb33699fc2c ("drm: Introduce the DP AUX bus")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510122726.v3.1.Ia91f4849adfc5eb9da1eb37ba79aa65fb3c95a0f@changeid

drm: Document the power requirements for DP AUX transfers

When doing DP AUX transfers there are two actors that need to be
powered in order for the DP AUX transfer to work: the DP source and
the DP sink. Commit bacbab58f09d ("drm: Mention the power state
requirement on side-channel operations") added some documentation
saying that the DP source is required to power itself up (if needed)
to do AUX transfers. However, that commit doesn't talk anything about
the DP sink.

For full fledged DP the sink isn't really a problem. It's expected
that if an external DP monitor isn't plugged in that attempting to do
AUX transfers won't work. It's also expected that if a DP monitor is
plugged in (and thus asserting HPD) then AUX transfers will work.

When we're looking at eDP, however, things are less obvious. Let's add
some documentation about expectations. Here's what we'll say:

1. We don't expect the DP AUX transfer function to power on an eDP
panel. If an eDP panel is physically connected but powered off then it
makes sense for the transfer to fail.

2. We'll document that the official way to power on a panel is via the
bridge chain, specifically by making sure that the panel's prepare
function has been called (which is called by
panel_bridge_pre_enable()). It's already specified in the kernel doc
of drm_panel_prepare() that this is the way to power the panel on and
also that after this call "it is possible to communicate with any
integrated circuitry via a command bus."

3. We'll also document that for code running in the panel driver
itself that it is legal for the panel driver to power itself up
however it wants (it doesn't need to officially call
drm_panel_pre_enable()) and then it can do AUX bus transfers. This is
currently the way that edp-panel works when it's running atop the DP
AUX bus.

NOTE: there was much discussion of all of this in response to v1 [1]
of this patch. A summary of that is:
* With the Intel i195 driver, apparently eDP panels do get powered
  up. We won't forbid this but it is expected that code that wants to
  run on a variety of platforms should ensure that the drm_panel's
  prepare() function has been called.
* There is at least a reasonable amount of agreement that the
  transfer() functions itself shouldn't be responsible for powering
  the panel. It's proposed that if we need the DP AUX dev nodes to be
  robust for eDP that the code handling the DP AUX dev nodes could
  handle powering the panel by ensuring that the panel's prepare()
  call was made. Potentially drm_dp_aux_dev_get_by_minor() could be a
  good place to do this. This is left as a future exercise. Until
  that's fixed the DP AUX dev nodes for eDP are probably best just
  used for debugging.
* If a panel could be in PSR and DP AUX via the dev node needs to be
  reliable then we need to be able to pull the panel out of PSR. On
  i915 this is also apparently handled as part of the transfer()
  function.

[1] https://lore.kernel.org/r/20220503162033.1.Ia8651894026707e4fa61267da944ff739610d180@changeid

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220509161733.v2.1.Ia8651894026707e4fa61267da944ff739610d180@changeid

drm/probe-helper: For DP, add 640x480 if all other modes are bad

As per Displayport spec section 5.2.1.2 ("Video Timing Format") says
that all detachable sinks shall support 640x480 @60Hz as a fail safe
mode.

A DP compliance test expected us to utilize the above fact when all
modes it presented to the DP source were not achievable. It presented
only modes that would be achievable with more lanes and/or higher
speeds than we had available and expected that when we couldn't do
that then we'd fall back to 640x480 even though it didn't advertise
this size.

In order to pass the compliance test (and also support any users who
might fall into a similar situation with their display), we need to
add 640x480 into the list of modes. However, we don't want to add
640x480 all the time. Despite the fact that the DP spec says all sinks
_shall support_ 640x480, they're not guaranteed to support it
_well_. Continuing to read the spec you can see that the display is
not required to really treat 640x480 equal to all the other modes. It
doesn't need to scale or anything--just display the pixels somehow for
failsafe purposes. It should also be noted that it's not hard to find
a display hooked up via DisplayPort that _doesn't_ support 640x480 at
all. The HP ZR30w screen I'm sitting in front of has a native DP port
and doesn't work at 640x480. I also plugged in a tiny 800x480 HDMI
display via a DP to HDMI adapter and that screen definitely doesn't
support 640x480.

As a compromise solution, let's only add the 640x480 mode if:
* We're on DP.
* All other modes have been pruned.

This acknowledges that 640x480 might not be the best mode to use but,
since sinks are _supposed_ to support it, we will at least fall back
to it if there's nothing else.

Note that we _don't_ add higher resolution modes like 1024x768 in this
case. We only add those modes for a failed EDID read where we have no
idea what's going on. In the case where we've pruned all modes then
instead we only want 640x480 which is the only defined "Fail Safe"
resolution.

This patch originated in response to Kuogee Hsieh's patch [1].

[1] https://lore.kernel.org/r/1650671124-14030-1-git-send-email-quic_khsieh@quicinc.com

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511155749.v3.2.I4ac7f55aa446699f8c200a23c10463256f6f439f@changeid

drm/probe-helper: Add helper for drm_helper_probe_single_connector_modes()

The drm_helper_probe_single_connector_modes() is a bit long. Let's
break a chunk off to update and validate modes. This helps avoid one
goto and also will allow us to more easily call the helper a second
time in a future patch without adding looping or another goto.

This change is intended to be a no-op change--just code movement.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511155749.v3.1.I2dd93486c6952bd52f2020904de0133970d11b29@changeid

drm/gem: Warn on trying to use a non-existing framebuffer plane

Warn if callers of drm_gem_fb_get_obj() try to use a GEM buffer for
a non-existing or unset plane.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220517113327.26919-6-tzimmermann@suse.de

drm/gem-vram: Ignore planes that are unused by framebuffer format

Only handle color planes that exist in a framebuffer's color format.
Ignore non-existing planes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220517113327.26919-5-tzimmermann@suse.de

drm/gem-vram: Share code between GEM VRAM's _{prepare, cleanup}_fb()

The error-recovery code in drm_gem_vram_plane_helper_prepare_fb() is of
the same pattern as drm_gem_vram_plane_helper_cleanup_fb(). Implement
both of them using an internal helper. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220517113327.26919-4-tzimmermann@suse.de

drm/gem: Ignore color planes that are unused by framebuffer format

Only handle color planes that exist in a framebuffer's color format.
Ignore non-existing planes.

So far, several helpers assumed that all 4 planes are available and
silently ignored non-existing planes. This lead to subtil bugs with
uninitialized data in instances of struct iosys_map. [1]

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/dri-devel/20210730183511.20080-1-tzimmermann@suse.de/T/#md0172b10bb588d8f20f4f456e304f08d2a4505f7
Link: https://patchwork.freedesktop.org/patch/msgid/20220517113327.26919-3-tzimmermann@suse.de

drm/gem: Share code between drm_gem_fb_{begin,end}_cpu_access()

The error-recovery code in drm_gem_fb_begin() is of the same pattern
as drm_gem_fb_end(). Implement both of them using an internal helper.
No functional changes.

v2:
* print additional information in error message (Javier)
* fix commit description (Javier)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220517113327.26919-2-tzimmermann@suse.de

drm/meson: add YUV422 output support

Support YUV422 output from the Amlogic Meson SoC VPU to the HDMI
controller. Without this YUV422 format out of the HDMI encoder
leads to using the dw-hdmi YUV444 to YUV422 color conversion which
gives wrong colors and a green line on the left edge of the screen.

Signed-off-by: Dongjin Kim <tobetter@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Furkan Kardame <f.kardame@manjaro.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Dan Johansen <strit@manjaro.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220516072245.10745-1-christianshewitt@gmail.com

drm/meson: Fix refcount leak in meson_encoder_hdmi_init

of_find_device_by_node() takes reference, we should use put_device()
to release it when not need anymore.
Add missing put_device() in error path to avoid refcount
leak.

Fixes: 0af5e0b41110 ("drm/meson: encoder_hdmi: switch to bridge DRM_BRIDGE_ATTACH_NO_CONNECTOR")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511054052.51981-1-linmq006@gmail.com

drm/udl: Set VGA connector

Set the connector type to VGA. The previously exported DVII type
isn't even supported by the driver.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220208143152.5846-1-tzimmermann@suse.de

drm/mgag200: Split up connector's mode_valid helper

Split up the connector's mode_valid helper into a simple-pipe and a
mode-config helper. The simple-pipe helper tests for display-size
limits while the mode-config helper tests for memory-bandwidth limits.

Also add the mgag200_ prefix to mga_vga_calculate_mode_bandwidth() and
comment on the function's purpose.

The memory-bandwidth tests assume that the display uses 4 bytes per
pixel. The first models of G200SE-A only had 1.75 MiB of VRAM, which
limits these devices to 640x480-32.

v2:
* note the memory constraints on early G200SE-A

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-8-tzimmermann@suse.de

drm/mgag200: Test memory requirements in drm_mode_config_funcs.mode_valid

Test for a mode's memory requirements in the device-wide mode_valid
helper. For simplicify, always assume a 32-bit color format. While
some rejected modes would work with less colors, implementing this
is probably not worth the effort.

Also remove the memory-related test from the connector's mode_valid
helper. The test uses the bpp value that users can specify on the
kernel's command line. This value is unrelated and the test would
belong into atomic_check.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-7-tzimmermann@suse.de

drm/mgag200: Remove struct mga_connector

struct mga_connector has outlived its purpose. Inline the rsp init
helper into the mode-config code and remove the data structure. No
functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-6-tzimmermann@suse.de

drm/mgag200: Switch I2C code to managed cleanup

Store the I2C state within struct mga_device and switch I2C to
managed release. Simplifies the related code and lets us remove
mga_connector_destroy().

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-5-tzimmermann@suse.de

drm/mgag200: Implement connector's get_modes with helper

Provide drm_connector_helper_get_modes_from_ddc() to implement the
connector's get_modes callback. The new helper updates the connector
from DDC-provided EDID data.

v2:
* clear property if EDID is NULL in helper

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-4-tzimmermann@suse.de

drm/mgag200: Fail on I2C initialization errors

Initialization of the I2C adapter was allowed to fail. The mgag200
driver would have continued without DDC support. Had this happened in
practice, it would have led to segmentation faults in the connector
code. Resolve this problem by failing driver initialization on I2C-
related errors.

v2:
* initialize 'ret' before drm_err() (kernel test robot)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-3-tzimmermann@suse.de

drm/mgag200: Acquire I/O lock while reading EDID

DDC operation conflicts with concurrent mode setting. Acquire the
driver's I/O lock in get_modes to prevent this. This change should
have been part of commit 931e3f3a0e99 ("drm/mgag200: Protect
concurrent access to I/O registers with lock"), but apparently got
lost somewhere.

v3:
* fix commit message to say 'drm/mgag200' (Jocelyn)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 931e3f3a0e99 ("drm/mgag200: Protect concurrent access to I/O registers with lock")
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-2-tzimmermann@suse.de

drm/bridge: anx7625: Use DPI bus type

As V4L2_FWNODE_BUS_TYPE_PARALLEL not properly descript for DPI
interface, this patch use new defined V4L2_FWNODE_BUS_TYPE_DPI for it.

Fixes: fd0310b6fe7d ("drm/bridge: anx7625: add MIPI DPI input feature")
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220422084720.959271-4-xji@analogixsemi.com

dt-bindings:drm/bridge:anx7625: add port@0 property

Add 'bus-type' and 'data-lanes' define, bus-type 7 for MIPI DPI
input, others for DSI input.

Signed-off-by: Xin Ji <xji@analogixsemi.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Acked-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220422084720.959271-3-xji@analogixsemi.com

drm/scheduler: Don't kill jobs in interrupt context

Interrupt context can't sleep. Drivers like Panfrost and MSM are taking
mutex when job is released, and thus, that code can sleep. This results
into "BUG: scheduling while atomic" if locks are contented while job is
freed. There is no good reason for releasing scheduler's jobs in IRQ
context, hence use normal context to fix the trouble.

Cc: stable@vger.kernel.org
Fixes: 542cff7893a3 ("drm/sched: Avoid lockdep spalt on killing a processes")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220411221536.283312-1-dmitry.osipenko@collabora.com

drm: bridge: DRM_FSL_LDB should depend on ARCH_MXC

The Freescale i.MX8MP LDB bridge is only present on Freescale i.MX8MP
SoCs.  Hence add a dependency on ARCH_MXC, to prevent asking the user
about this driver when configuring a kernel without i.MX SoC support.

Fixes: 463db5c2ed4aed01 ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/449e08ca791a3ca308de5477c1bdc1f6eb1b34e7.1652104211.git.geert+renesas@glider.be

drm: bridge: icn6211: Register macro clean up

Drop two unused register macros, ICN6211_MAX_REGISTER and MIPI_ATE_STATUS_1,
neither of which is used and where the later should be specified using macro
MIPI_ATE_STATUS(1) instead. Drop the _(n) underscore and keep only the (n)
part of register macros. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220430025020.640277-1-marex@denx.de

drm/mgag200: Enable atomic gamma lut update

Add support for atomic update of gamma lut.
With this patch the "Night light" feature of gnome3
is working properly on mgag200.

v2:
 - Add a default linear gamma function
 - renamed functions with mgag200 prefix
 - use format's 4cc code instead of bit depth
 - use better interpolation for 16bits gamma
 - remove legacy function mga_crtc_load_lut()
 - can't remove the call to drm_mode_crtc_set_gamma_size()
    because it doesn't work with userspace.
 - other small refactors

v3:
 - change mgag200_crtc_set_gamma*() argument
    to struct drm_format_info *format
 - fix printk format to %p4cc for 4cc and %zu for size_t
 - rebased to drm-misc-next.

Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220513084900.1832381-1-jfalempe@redhat.com

drm/client: Don't add new command-line mode

Don't add a mode for the kernel's command-line parameters from
within the DRM client code. Doing so can result in an unusable
display. If there's no compatible command-line mode, the client
will use one of the connector's preferred modes.

All mode creation and validation has to be performed by the
connector. When clients run, the connector's fill_modes callback
has already processed the kernel parameters and validated each
mode before adding it. The connector's mode list does not contain
invalid modes.

v2:
* grammar in commit message (Javier)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511183125.14294-4-tzimmermann@suse.de

drm/client: Look for command-line modes first

When picking a mode, first look for modes that have been specified
by the user on the kernel's command line. Only if that fails, use
the existing heuristic of picking a nearby mode from it's various
parameters.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511183125.14294-3-tzimmermann@suse.de

drm: Always warn if user-defined modes are not supported

Print a warning if a user-specifed display mode is not supported by
the display pipeline. Users specified the display mode on the kernel
command line with the use of the video= parameter. Setting an
unsupported mode will leave the console blank, so we should at least
let the user know why.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511183125.14294-2-tzimmermann@suse.de

drm/rockchip: vop2: unlock on error path in vop2_crtc_atomic_enable()

This error path needs an unlock before returning.

Fixes: 604be85547ce ("drm/rockchip: Add VOP2 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YnjZQRV9lpub2ET8@kili

drm/panel: feiyang-fy07024di26a30d: make reset gpio optional

Some implementations do not use the reset signal, instead tying it to dvdd.
Make the reset gpio optional to permit this.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511113517.4172962-3-pgwipeout@gmail.com

dt-bindings: display: panel: feiyang, fy07024di26a30d: make reset gpio optional

Some implementations do not use the reset signal, instead tying it to dvdd.
Make the reset gpio optional to permit this.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511113517.4172962-2-pgwipeout@gmail.com

drm/edid: convert version_greater() to drm_edid

We'll need to propagate drm_edid everywhere. Also make version_greater()
a function for type safety.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f1835a86294b392d075570001ed9009a48352670.1652097712.git.jani.nikula@intel.com

drm/displayid: convert to drm_edid

We'll need to propagate drm_edid everywhere.

v2: Rebase

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a52a6882e87a4bb6b1670918f3aba13f9b52f6de.1652097712.git.jani.nikula@intel.com

drm/edid: add drm_edid helper for drm_update_tile_info()

We'll need to propagate drm_edid everywhere.

v2: Handle NULL EDID pointer (Ville, CI)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5b36683b656446a4d9a172d4dca1cf9aca08a48b.1652097712.git.jani.nikula@intel.com

drm/edid: convert drm_edid_iter_begin() to drm_edid

We'll need to propagate drm_edid everywhere.

v2: Rebase

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/24dfb5fd9026ebef573bb55b368b94e56cae5cec.1652097712.git.jani.nikula@intel.com

drm/edid: convert cea_db_iter_edid_begin() to drm_edid

We'll need to propagate drm_edid everywhere.

v2: Handle NULL drm_edid

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7d9f060815086e1e4ea037dbfb9fd8ad54d1f25e.1652097712.git.jani.nikula@intel.com

drm/edid: add drm_edid helper for drm_detect_monitor_audio()

We'll need to propagate drm_edid everywhere.

v2: Handle NULL EDID pointer (Ville, CI)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ea33244c473ace1bc72a7e87f97580f00705a683.1652097712.git.jani.nikula@intel.com

drm/edid: add drm_edid helper for drm_detect_hdmi_monitor()

We'll need to propagate drm_edid everywhere.

v2: Handle NULL EDID pointer (Ville, CI)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2fbee0d7b544b44ef0866bb154beefac5d260bec.1652097712.git.jani.nikula@intel.com

drm/edid: add drm_edid helper for drm_edid_to_speaker_allocation()

We'll need to propagate drm_edid everywhere.'

v2: Handle NULL EDID pointer (Ville, CI)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/770d095c93274969c4b86480e07044e16a7b5760.1652097712.git.jani.nikula@intel.com

drm/edid: add drm_edid helper for drm_edid_to_sad()

We'll need to propagate drm_edid everywhere.

v2: Handle NULL EDID pointer (Ville, CI)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/14aa1e44caa2e9c1b54c2f2a471d2fd7d3f62d5d.1652097712.git.jani.nikula@intel.com

drm/edid: convert drm_for_each_detailed_block() to drm_edid

We'll need to propagate drm_edid everywhere.

v2: Fix checkpatch warning on superfluous parens

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bfd06d64235393012b2f3626d5764350de5f5321.1652097712.git.jani.nikula@intel.com

drm/edid: convert get_monitor_name() to drm_edid

We'll need to propagate drm_edid everywhere.

v2: Drop incorrect NULL name check (Dan Carpenter)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c940aad14f323ef3a7907a0fb534011deb1589a9.1652097712.git.jani.nikula@intel.com

drm/edid: convert mode_in_range() and drm_monitor_supports_rb() to drm_edid

We'll need to propagate drm_edid everywhere.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/aac7dd14ce8c266491e9dfae12cad00fecdcd2e3.1652097712.git.jani.nikula@intel.com

drm/edid: convert drm_mode_std() and children to drm_edid

We'll need to propagate drm_edid everywhere.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9fb970d108a8bb666b87a590c74f480e0fd81cc8.1652097712.git.jani.nikula@intel.com

drm/edid: convert drm_cvt_modes_for_range() to drm_edid

We'll need to propagate drm_edid everywhere.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c2c251a504933debacf78e1382ae665ae490ed40.1652097712.git.jani.nikula@intel.com

drm/edid: convert drm_gtf_modes_for_range() to drm_edid

We'll need to propagate drm_edid everywhere.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b50377ce67fd3cee6628ea5865c80fa0fa7da990.1652097712.git.jani.nikula@intel.com

drm/edid: convert drm_dmt_modes_for_range() to drm_edid

We'll need to propagate drm_edid everywhere.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a8f393263225321e74f1e2884e81b3346d1adf20.1652097712.git.jani.nikula@intel.com

drm/edid: convert drm_mode_detailed() to drm_edid

We'll need to propagate drm_edid everywhere.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6e4625d529ee4bfb2f6ebbfef5fb707d65a0554d.1652097712.git.jani.nikula@intel.com

drm/edid: convert struct detailed_mode_closure to drm_edid

We'll need to propagate drm_edid everywhere.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/da4c927cd973766568a79ef044254fff20317e7f.1652097712.git.jani.nikula@intel.com

drm/edid: convert drm_edid_connector_update() to drm_edid fully

We'll need to propagate drm_edid everywhere.

v3: s/edid/drm_edid/ in comment too (Ankit)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511092650.4193330-1-jani.nikula@intel.com

drm/edid: propagate drm_edid to drm_edid_to_eld()

We'll need to propagate drm_edid everywhere.

v3: Rebase

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511092349.4186498-1-jani.nikula@intel.com

drm/edid: keep propagating drm_edid to display info

We'll need to propagate drm_edid everywhere.

v3: Update comment to refer to update_display_info() (Ankit)

v2: Use drm_edid_legacy_init()

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511092104.4179637-1-jani.nikula@intel.com

drm/edid: start propagating drm_edid to lower levels

We'll need to propagate drm_edid everywhere. This is a clunky start, but
a start nonetheless. We'll eventually convert all of the EDID parsing to
struct drm_edid.

Initially, we'll just create the struct drm_edid in stack. This will be
the compat layer for legacy struct edid code. In the future, we'll have
EDID read return drm_edid objects.

v2: Add legacy init helper.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/000452fddedbaf7f473ac25d4dde2502e60b8e39.1652097712.git.jani.nikula@intel.com

drm/edid: add struct drm_edid container

Introduce new opaque type struct drm_edid to encapsulate the EDID data
and the size allocated for it. The contents will be private to
drm_edid.c.

There are a number of reasons for adding a container around struct edid:

* struct edid is a raw blob pointer to data that usually originates
  outside of the kernel. Its size is contained within the structure.

* There's no way to attach meta information (such as allocated memory
  size) to struct edid.

* Validation of the EDID blob and its size become crucial, and it's
  spread all over the subsystem, with varying levels of accuracy.

* HDMI Forum has introduced an HF-EEODB extension that defines an
  override EDID size within an EDID extension. The size allocated for an
  EDID depends on whether the allocator understands the HF-EEODB
  extension. Given a struct edid *, it's impossible to know how much
  memory was actually allocated for it.

There are also some reasons for making the container type struct
drm_edid opaque and private to drm_edid.c:

* Have only one place for creating and parsing the EDID, to avoid
  duplicating bugs.

* Prepare for reading a pure DisplayID 2.0 from its own DDC address, and
  adding it within the same struct drm_edid container, transparently,
  and for all drivers.

* With the idea that the drm_edid objects are immutable during their
  lifetimes, it will be possible to refcount them and reduce EDID
  copying everywhere (this is left for future work).

Initially, just add the type. In follow-up, we'll start converting the
guts of drm_edid.c to use it, and finally add interfaces around it.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f3ecabd8a219aea678ad00f7bcdecf77b27b3c78.1652097712.git.jani.nikula@intel.com

drm/edid: convert drm_for_each_detailed_block() to edid iter

We have an iterator for this, use it. It does include the base block,
but its tag is 0 and will be skipped.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a68718819a3dbfbdaaaddca7f73afa5ac6b33d07.1652097712.git.jani.nikula@intel.com

drm/edid: use else-if in CTA extension parsing

Only one of the conditions can be true.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3a7ba2217134b0ab4c4c72e4333231a4e0616e88.1652097712.git.jani.nikula@intel.com

fbdev: vesafb: Allow to be built if COMPILE_TEST is enabled

The driver has runtime but no build time dependency with X86, so it can
be built for testing purposes if the COMPILE_TEST option is enabled.

This is useful to have more build coverage and make sure that the driver
is not affected by changes that could cause build regressions.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505120419.314136-1-javierm@redhat.com

fbdev: Restart conflicting fb removal loop when unregistering devices

Drivers that want to remove registered conflicting framebuffers prior to
register their own framebuffer, call to remove_conflicting_framebuffers().

This function takes the registration_lock mutex, to prevent a race when
drivers register framebuffer devices. But if a conflicting framebuffer
device is found, the underlaying platform device is unregistered and this
will lead to the platform driver .remove callback to be called. Which in
turn will call to unregister_framebuffer() that takes the same lock.

To prevent this, a struct fb_info.forced_out field was used as indication
to unregister_framebuffer() whether the mutex has to be grabbed or not.

But this could be unsafe, since the fbdev core is making assumptions about
what drivers may or may not do in their .remove callbacks. Allowing to run
these callbacks with the registration_lock held can cause deadlocks, since
the fbdev core has no control over what drivers do in their removal path.

A better solution is to drop the lock before platform_device_unregister(),
so unregister_framebuffer() can take it when called from the fbdev driver.
The lock is acquired again after the device has been unregistered and at
this point the removal loop can be restarted.

Since the conflicting framebuffer device has already been removed, the
loop would just finish when no more conflicting framebuffers are found.

Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511113039.1252432-1-javierm@redhat.com

drm/bridge: tc358767: Add DSI-to-(e)DP mode support

Implement DSI-to-e(DP) mode, which is a mix of currently supported
DSI-to-DPI and DPI-to-(e)DP modes. The input side is configured as
either DSI or DPI, the DP AUX channel is registered for both input
side options, and the DSI host is attached for both DPI and (e)DP
output side options.

One notable detail is that the DSI-to-(e)DP mode requires the Pixel
PLL to be always enabled, which is not needed for DPI-to-(e)DP mode
which gets the matching clock direct from DPI Pixel Clock instead.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220429205644.245480-2-marex@denx.de

drm/bridge: tc358767: Factor out DSI and DPI RX enablement

Factor out register programming to configure the chip video RX side for
reception of video data from DSI or DPI. This is particularly useful in
the (e)DP output mode, where the video data can be received from either
DPI or DSI. While only the former is supported in (e)DP output mode so
far, this patch is added in preparation for addition of the later.

There is a change in the order or register programming in case of the
DSI-to-DPI mode. The DSI RX side is now programmed and enabled all in
one place after the output mode has been configured. Before this change,
the DSI RX has been programmed before the output mode has been set and
only enabled afterward. The order makes no difference however, since the
DSI RX is only enabled at the end either way.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220429205644.245480-1-marex@denx.de

drm/mgag200: Warn once if trying to set start address on broken hardware.

Some MGA200 hardware is broken and can't use a start address > 0.

v2: Warn if startaddr is not 0, and hw doesn't support it.
  (instead of removing MGAG200_FLAG_HW_BUG_NO_STARTADD)

Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504134026.283417-4-jfalempe@redhat.com

drm/mgag200: Optimize damage clips

When there are multiple damage clips, previous code merged them into one
big rectangle. As the Matrox memory is very slow, it's faster to copy each
damage clip.

Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504134026.283417-2-jfalempe@redhat.com

drm/mgag200: Add FB_DAMAGE_CLIPS support

The driver does support damage clips, but doesn't advertise it.
So when running gnome/wayland on Matrox hardware, the full frame is
copied to the slow Matrox memory, which leads to very poor performances.

Add drm_plane_enable_fb_damage_clips() to advertise this capability to
userspace.

With this patch, gnome/wayland becomes usable on Matrox GPU.

Suggested-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504134026.283417-2-jfalempe@redhat.com

MAINTAINERS: add Melissa to V3D maintainers

I've been contributing to v3d through improvements, reviews, testing,
debugging, etc. So, I'm adding myself as a co-maintainer of the V3D
driver.

Signed-off-by: Melissa Wen <mwen@igalia.com>
Acked-by: Juan A. Suarez <jasuarez@igalia.com>
Acked-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220429193317.ol3u4e5jpt5jucox@mail.igalia.com

drm/bridge: cdns-dsi: Add support for pre_enable and post_enable control functions.

Add support for pre_enable and post_enable drm bridge control functions.
Making sure that host to be prepared before panel is powered up,
for the panels like TC358762.

Signed-off-by: Jayshri Pawar <jpawar@cadence.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220411140606.15654-1-jpawar@cadence.com

drm/todo: Add entry for converting kselftests to kunit

Many of the kselftests in DRM can be converted to kunit tests instead,
since that framework is more suitable for unit testing.

Suggested-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220509130846.694397-1-javierm@redhat.com

MAINTAINERS: Add simpledrm driver co-maintainer

Thomas asked me to serve as co-maintainer for the simpledrm driver.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505172610.338299-1-javierm@redhat.com

drm/amdgpu: move internal vram_mgr function into the C file

No need to have those in the header.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510113649.879821-2-christian.koenig@amd.com

drm/amdgpu: fix start calculation in amdgpu_vram_mgr_new

We still need to calculate a virtual start address for the resource to
aid checking of it is visible or not. Only matters on small BAR systems,
but better save than sorry.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510113649.879821-1-christian.koenig@amd.com

drm/amdgpu: switch DM to atomic fence helpers v2

This gives us the standard atomic implicit and explicit fencing rules.

v2: move the wait to amdgpu_dm_atomic_commit_tail

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Roman Li <Roman.Li@amd.com>
Cc: Qingqing Zhuo <qingqing.zhuo@amd.com>
Cc: Jude Shih <shenshih@amd.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220509074712.163899-1-christian.koenig@amd.com

drm/bridge: simplify the return expression of ps8640_bridge_host_attach

Simplify the return expression.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220429055145.3852271-1-chi.minghao@zte.com.cn

dma-buf: add the name field to the table header

'cat /sys/kernel/debug/dma_buf/bufinfo' will print the Dma-buf
Objects' information when the CONFIG_DEBUG_FS=y.
However, the printed table header information does not contain
the name field. So we need to add the name field to the table
header and use the '<none>' to replace the empty buf_obj->name.

Signed-off-by: Yuanzheng Song <songyuanzheng@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220428063924.3570409-1-songyuanzheng@huawei.com

drm/ttm: move default BO destructor into VMWGFX v2

It's the only driver using this.

v2: use BUG_ON() in vmw_bo_create() as suggested by Zack

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329110243.6335-5-christian.koenig@amd.com

drm/rockchip: Fix spelling mistake "aligened" -> "aligned"

There is a spelling mistake in a drm_err message. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505111044.374174-1-colin.i.king@gmail.com

drm/rockchip: remove unneeded semicolon from vop2 driver

Eliminate the following coccicheck warning:
./drivers/gpu/drm/rockchip/rockchip_drm_vop2.c:1476:2-3: Unneeded
semicolon

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505232659.4405-1-yang.lee@linux.alibaba.com