Uoti Urpala [Mon, 23 Jun 2014 13:50:03 +0000 (16:50 +0300)]
core/transaction: fix cycle break attempts outside transaction
Patch fixes some incorrect-looking code in transaction.c.
It could fix cases where Debian users with bad package configurations
had systemd go into an infinite loop printing messages about breaking an
ordering cycle, though I have not reproduced that problem myself.
transaction_verify_order_one() considers jobs/units outside current
transaction when checking whether ordering dependencies cause cycles.
It would also incorrectly try to break cycles at these jobs; this
cannot work, as the break action is to remove the job from the
transaction, which is a no-op if the job isn't part of the transaction
to begin with. The unit_matters_to_anchor() test also looks like it
would not work correctly for non-transaction jobs. Add a check to
verify that the unit is part of the transaction before considering a
job a candidate for deletion.
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=752259
Filipe Brandenburger [Wed, 25 Jun 2014 06:06:47 +0000 (23:06 -0700)]
build-sys: include PolicyKit files as part of distribution
So that building from an archive works even if intltool is not present.
The README file already mentioned that intltool should only be required
when building from git.
Tested: Built it from the distribution archive on a host without intltool.
$ ./configure --enable-polkit
$ make
Filipe Brandenburger [Wed, 25 Jun 2014 06:06:46 +0000 (23:06 -0700)]
build-sys: disable NLS support if intltool is not found
IT_PROG_INTLTOOL makes configure fail if intltool is not present. If we can
not find intltool, then disable NLS (otherwise make in po/ fails since MSGFMT
will not be defined.)
Tested: Built it on a host without intltool.
$ ./configure --enable-nls
...
checking for intltool-merge... no
configure: error: --enable-nls requested but intltool not found
$ ./configure --disable-polkit
...
checking for intltool-merge... no
configure: WARNING: *** Disabling NLS support because intltool was not found
checking whether NLS is requested... no
...
$ make
https://bugs.freedesktop.org/show_bug.cgi?id=79692
Filipe Brandenburger [Wed, 25 Jun 2014 06:06:45 +0000 (23:06 -0700)]
build-sys: add explicit support for --disable-nls
In particular, disable intltool when --disable-nls is passed to configure.
Tested: Built it on a host without intltool or gettext.
$ ./configure --disable-nls --disable-polkit
$ make
Tom Hirst [Wed, 25 Jun 2014 11:45:45 +0000 (11:45 +0000)]
core: Don't require cgroups xattr support
Failure to mount cgroups with xattr should not be fatal
Michael Olbrich [Wed, 25 Jun 2014 12:43:57 +0000 (14:43 +0200)]
install: enable timesyncd by default
This treats it similarly to networkd, resolved and others and it matches
what 90-systemd.preset does.
Michał Bartoszkiewicz [Wed, 25 Jun 2014 12:54:48 +0000 (14:54 +0200)]
core: use correct format string for UIDs
Zbigniew Jędrzejewski-Szmek [Thu, 26 Jun 2014 05:02:48 +0000 (01:02 -0400)]
man: add coredump.conf(5)
Zbigniew Jędrzejewski-Szmek [Thu, 26 Jun 2014 03:38:49 +0000 (23:38 -0400)]
coredump+coredumpctl: add COREDUMP_FILENAME, use in coredumpctl
Zbigniew Jędrzejewski-Szmek [Thu, 26 Jun 2014 00:53:40 +0000 (20:53 -0400)]
coredump: make compression configurable
Add Compression={none,xz} and CompressionLevel=0-9 settings. Defaults
are xz/6.
Compression=filesystem may be added later.
I picked "xz" for the compression "type", since we might want to add
different compressors later on. XZ is fairly memory and CPU intensive, and
embedded users will likely want to use LZO or some other lightweight compression
mechanism.
Zbigniew Jędrzejewski-Szmek [Wed, 25 Jun 2014 05:03:03 +0000 (01:03 -0400)]
coredump: compress core files
Unfortunately the core is first written uncompressed, then compressed
by reading from disk and writing to the output file. This is ugly and
slow, but I don't see a way around, if we want to get the backtrace
without keeping everything in memory.
Zbigniew Jędrzejewski-Szmek [Wed, 25 Jun 2014 01:24:46 +0000 (21:24 -0400)]
journal/compress: add stream compression/decompression functions
Zbigniew Jędrzejewski-Szmek [Wed, 25 Jun 2014 01:24:09 +0000 (21:24 -0400)]
journal/compress: simplify compress_blob
Zbigniew Jędrzejewski-Szmek [Thu, 26 Jun 2014 05:41:04 +0000 (01:41 -0400)]
shutdown: rework messages during shutdown
When running in 'quiet' mode, the only message printed from shutdown
binary would be 'Cannot finalize remaining file systems and devices,
giving up.', the only log line at error level before switch back to
initramfs. This is misleading, because in initramfs everything will
be cleaned up properly.
Avoid printing anything at error level before the attempt to switch
back to initramfs. Rework the messages to contain a bit more
information what is still remaining, to help people diagnose shutdown
issues.
Thomas Hindoe Paaboel Andersen [Wed, 25 Jun 2014 22:36:43 +0000 (00:36 +0200)]
sysv-generator: fix incorect ordering of Wants
Lennart Poettering [Wed, 25 Jun 2014 10:31:03 +0000 (12:31 +0200)]
systemctl: add new "is-system-running" command to check whether system is fully up
https://bugs.freedesktop.org/show_bug.cgi?id=66926
Lennart Poettering [Wed, 25 Jun 2014 08:07:20 +0000 (10:07 +0200)]
update TODO
Lennart Poettering [Tue, 24 Jun 2014 17:37:22 +0000 (19:37 +0200)]
fsck: consider a fsck implementation linked to /bin/true non-existant
Lennart Poettering [Tue, 24 Jun 2014 17:34:27 +0000 (19:34 +0200)]
update TODO
Zbigniew Jędrzejewski-Szmek [Wed, 25 Jun 2014 05:46:30 +0000 (01:46 -0400)]
Trim TODO
Ronny Chevalier [Tue, 24 Jun 2014 18:42:29 +0000 (20:42 +0200)]
tests: add test-compress
Thomas Hindoe Paaboel Andersen [Tue, 24 Jun 2014 21:07:48 +0000 (23:07 +0200)]
sysv-generator: rename PidFile to PIDFile
Spotted by Alexey Shabalin
Ronny Chevalier [Tue, 24 Jun 2014 17:00:32 +0000 (19:00 +0200)]
use more _cleanup_ macro
Ronny Chevalier [Tue, 24 Jun 2014 17:00:31 +0000 (19:00 +0200)]
sd-dhcp6-client: use %m instead of strerror(errno)
Kay Sievers [Tue, 24 Jun 2014 16:10:30 +0000 (18:10 +0200)]
switch-root: create essential base directories at system bootup
This allows us to bootup a rootfs with a /usr directory only.
Tom Gundersen [Thu, 22 May 2014 13:18:28 +0000 (15:18 +0200)]
sd-dhcp-client: return NULL from _unref() like the other sd-* libraries
Let's keep this behavior consistent across our libraries.
In order to keep the refcounting working, a DONT_DESTROY macro similar
to the one in sd-bus was introduced.
Kay Sievers [Tue, 24 Jun 2014 11:30:11 +0000 (13:30 +0200)]
nspawn: create essential base directories at system bootup
This allows us to bootup a rootfs with a /usr directory only.
Zbigniew Jędrzejewski-Szmek [Tue, 24 Jun 2014 03:09:08 +0000 (23:09 -0400)]
Revert "Add systemd-coredumpctl as an alias for coredumpctl"
This reverts the documentation part of commit
dfdd0e0730385eef08f019863fd41168b05b6ab0.
Zbigniew Jędrzejewski-Szmek [Tue, 24 Jun 2014 03:02:19 +0000 (23:02 -0400)]
coredump: log coredump even if core dumping fails
Journal might be functional even if we cannot write to
/var/lib/systemd/coredump.
Zbigniew Jędrzejewski-Szmek [Tue, 24 Jun 2014 00:18:16 +0000 (20:18 -0400)]
coredump: retrieve comm information from /proc
Kernel mangles comm information in an irreversible way when comm
constains repeated spaces. Retrieve comm information from /proc, and
only fallback to the information provided on the commandline when
retrieving information from /proc fails.
Add exe information to the list of saved xattr.
https://bugs.freedesktop.org/show_bug.cgi?id=62043
Zbigniew Jędrzejewski-Szmek [Mon, 23 Jun 2014 18:11:30 +0000 (14:11 -0400)]
fstab-generator: simplify add_root_mount
Zbigniew Jędrzejewski-Szmek [Tue, 24 Jun 2014 03:07:53 +0000 (23:07 -0400)]
man: fix path in crypttab(5)
https://bugs.freedesktop.org/show_bug.cgi?id=75816
Ronny Chevalier [Mon, 23 Jun 2014 19:28:23 +0000 (21:28 +0200)]
build-sys: do not run coverage if build failed
Ronny Chevalier [Mon, 23 Jun 2014 19:28:22 +0000 (21:28 +0200)]
tests: add test-ratelimit
Ronny Chevalier [Mon, 23 Jun 2014 19:28:21 +0000 (21:28 +0200)]
tests: add tests to test-unit-name
add tests for:
- unit_instance_is_valid
- unit_prefix_is_valid
- unit_name_change_suffix
- unit_name_build
- unit_name_is_instance
- build_subslice
- unit_name_to_instance
- unit_name_escape
Lennart Poettering [Mon, 23 Jun 2014 17:18:44 +0000 (19:18 +0200)]
cryptsetup: don't add unit dependency on /dev/null devices when it is listed as password file
As special magic, don't create device dependencies for /dev/null. Of
course, there might be similar devices we might want to include, but
given that none of them really make sense to specify as password source
there's really no point in checking for anything else here.
https://bugs.freedesktop.org/show_bug.cgi?id=75816
Ronan Le Martret [Tue, 22 Apr 2014 08:33:25 +0000 (10:33 +0200)]
core: You can not put the cached result of use_smack fct, as we are not sure the "/sys" is mounted. So we should mount "sys" before "/proc"
https://bugs.freedesktop.org/show_bug.cgi?id=77646
Hristo Venev [Mon, 23 Jun 2014 16:53:04 +0000 (18:53 +0200)]
core: make sure Environment fields passed in for transient units are properly written to unit files
https://bugs.freedesktop.org/show_bug.cgi?id=76744
Carl Schaefer [Mon, 23 Jun 2014 16:23:48 +0000 (18:23 +0200)]
vconsole: also copy character maps (not just fonts) from vt1 to vt2, vt3, ...
https://bugs.freedesktop.org/show_bug.cgi?id=78796
Lennart Poettering [Mon, 23 Jun 2014 14:28:05 +0000 (16:28 +0200)]
coredump: never write more than the configured processing size limit to disk
Lennart Poettering [Mon, 23 Jun 2014 13:55:24 +0000 (15:55 +0200)]
coredumpctl: show comm name next to PID
Lennart Poettering [Mon, 23 Jun 2014 13:53:03 +0000 (15:53 +0200)]
coredump: quit early if we cannot store ay coredump to disk
Lennart Poettering [Mon, 23 Jun 2014 13:51:09 +0000 (15:51 +0200)]
coredumpctl: include timestamp information in "coredumpctl info" output
Lennart Poettering [Mon, 23 Jun 2014 10:42:17 +0000 (12:42 +0200)]
README: mention that elfutils is an (optional) dependency now
Lennart Poettering [Mon, 23 Jun 2014 10:39:53 +0000 (12:39 +0200)]
coredump: also escape spaces in comm fields when formatting file names
Zbigniew Jędrzejewski-Szmek [Sun, 22 Jun 2014 18:52:43 +0000 (14:52 -0400)]
README: add gobject-introspection
Zbigniew Jędrzejewski-Szmek [Sun, 22 Jun 2014 18:20:08 +0000 (14:20 -0400)]
core/snapshot: log info when snapshots are created and removed
Snapshot mechanism is not used very much, but snapshot creation/destruction
should be at least as verbose as normal unit starting/stopping.
Zbigniew Jędrzejewski-Szmek [Sun, 22 Jun 2014 18:04:23 +0000 (14:04 -0400)]
core/transaction: avoid misleading error message when unit not found
There's no point in telling the user to look at the logs when
an attempt to load the unit file failed with ENOENT.
https://bugzilla.redhat.com/show_bug.cgi?id=996133
Zbigniew Jędrzejewski-Szmek [Sun, 22 Jun 2014 18:00:36 +0000 (14:00 -0400)]
core/transaction: reindent and split very long lines
Zbigniew Jędrzejewski-Szmek [Sun, 22 Jun 2014 17:38:48 +0000 (13:38 -0400)]
Add systemd-coredumpctl as an alias for coredumpctl
Should make the transition easier for exisiting users.
Zbigniew Jędrzejewski-Szmek [Sun, 22 Jun 2014 17:21:47 +0000 (13:21 -0400)]
readahead: avoid gcc warning about format
src/readahead/readahead-common.c:55:17: warning: format ‘%zu’ expects argument of type ‘size_t’, but argument 7 has type ‘__off64_t’ [-Wformat=]
log_debug("Not preloading file %s with size out of bounds %zu", fn, st->st_size);
^
Michal Sekletar [Thu, 19 Jun 2014 16:59:37 +0000 (18:59 +0200)]
dhcp-network: don't bother with IP fragments
Michael Marineau [Fri, 20 Jun 2014 20:46:04 +0000 (13:46 -0700)]
build-sys: require elfutils >= 158
The recently added stacktrace support in
8d4e028f uses functions added
in elfutils 158. Check for one of the new functions to avoid attempting
to build against older versions.
Zbigniew Jędrzejewski-Szmek [Sun, 22 Jun 2014 15:50:33 +0000 (11:50 -0400)]
man: untabify systemd-resolved.service.xml
Jonathan Boulle [Fri, 20 Jun 2014 21:46:18 +0000 (14:46 -0700)]
fix systemd-resolved reference in man page
Guess this was missed in the copy-paste :-)
Marc-Antoine Perennou [Sun, 22 Jun 2014 10:36:03 +0000 (19:36 +0900)]
fix in_addr_prefix_intersect for 32bits
shifting from a non fixed number of bits >= to the size of the type
leads to weird results, handle the special case of << 32 to fix it.
This was causing a test failure from test-socket-util:
Assertion 'in_addr_prefix_intersect(f, &ua, apl, &ub, bpl) == result' failed at
/var/tmp/paludis/build/sys-apps-systemd-scm/work/systemd-scm/src/test/test-socket-util.c:147, function
test_in_addr_prefix_intersect_one(). Aborting.
Minimal reproducer:
paludisbuild@Lou /tmp $ cat test.c
static void test(unsigned m) {
unsigned nm = 0xFFFFFFFFUL << (32-m);
printf("%u: %x\n", m, nm);
}
int main (void) {
test(1);
test(0);
return 0;
}
paludisbuild@Lou /tmp $ gcc -m32 -std=gnu99 test.c -o test32
paludisbuild@Lou /tmp $ ./test32
1:
80000000
0:
ffffffff
paludisbuild@Lou /tmp $ gcc -std=gnu99 test.c -o test64
paludisbuild@Lou /tmp $ ./test64
1:
80000000
0: 0
Ronny Chevalier [Sun, 22 Jun 2014 12:53:24 +0000 (14:53 +0200)]
update .gitignore
Thomas Hindoe Paaboel Andersen [Sat, 21 Jun 2014 03:55:17 +0000 (05:55 +0200)]
consistently order cleanup attribute before type
Ronny Chevalier [Sat, 21 Jun 2014 20:07:12 +0000 (22:07 +0200)]
tests: add test_fdset_remove
Ronny Chevalier [Sat, 21 Jun 2014 20:07:11 +0000 (22:07 +0200)]
tests: add test-async
Ronny Chevalier [Sat, 21 Jun 2014 20:07:10 +0000 (22:07 +0200)]
tests: add test-capability
Ronny Chevalier [Sat, 21 Jun 2014 20:07:09 +0000 (22:07 +0200)]
build-sys: add -pthread flag for libsystemd-shared
src/shared/async.c uses pthread so it will fail at link time if we link
only to libsystemd-shared and use async
Kay Sievers [Sat, 21 Jun 2014 14:50:11 +0000 (16:50 +0200)]
build-sys: replace nm with $(NM)
Kay Sievers [Sat, 21 Jun 2014 13:53:58 +0000 (15:53 +0200)]
gudev: replace regex with sym file
Kay Sievers [Sat, 21 Jun 2014 13:45:49 +0000 (15:45 +0200)]
pam_systemd: replace regex with sym file
Kay Sievers [Sat, 21 Jun 2014 13:44:14 +0000 (15:44 +0200)]
pam_systemd: rename source file to match the module
Tom Gundersen [Sat, 21 Jun 2014 13:26:41 +0000 (15:26 +0200)]
sd-dhcp-server: change default lease time form 1m to 1h
The short lease was useful for testing, but in real-world usage it is pointless to keep leases
this short. That said, the cost of lease renewal is really low, so we keep the lease still
relatively short at one hour to not get into hard-to-hit problems with lease exhaustion etc.
Tom Gundersen [Sat, 21 Jun 2014 12:39:36 +0000 (14:39 +0200)]
sd-dhcp-server: fix broadcast of DHCP packets
The destination IP address should be INADDR_BROADCAST, but was
accidentally left as INADDR_ANY.
Zbigniew Jędrzejewski-Szmek [Sat, 21 Jun 2014 02:43:49 +0000 (22:43 -0400)]
util: treat fuse.sshfs as a network filesystem
https://bugs.freedesktop.org/show_bug.cgi?id=73727
Zbigniew Jędrzejewski-Szmek [Fri, 20 Jun 2014 23:45:45 +0000 (19:45 -0400)]
missing.h: add various network enums
We used to check if e.g. IFLA_BOND_MAX is defined and provide fallback
values in missing.h is it wasn't. But over time, various kernel
versions added IFLA_* defines, so checking for IFLA_BOND_MAX is not
enough if the kernel is new enough to have some of them but too old to
have all. In case we detect that the latest known enum value is
missing, #define most of them.
https://bugs.freedesktop.org/show_bug.cgi?id=80095
Zbigniew Jędrzejewski-Szmek [Fri, 20 Jun 2014 22:14:22 +0000 (18:14 -0400)]
build-sys: fail if python support requested but not found
Filipe Brandenburger [Tue, 17 Jun 2014 03:54:54 +0000 (20:54 -0700)]
build-sys: check that compat-libs are enabled for "make dist"
Running "make dist" requires --enable-compat-libs since DIST_SOURCES will list
generated files such as libsystemd-daemon.c.
Tested:
$ ./configure && make && make dist
*** compat-libs must be enabled in order to make dist
make: *** [dist-check-compat-libs] Error 1
Filipe Brandenburger [Tue, 17 Jun 2014 03:54:53 +0000 (20:54 -0700)]
build-sys: check that python is enabled for "make dist"
Running "make dist" requires Python support since some of the man page sources
(such as man/systemd.index.xml and man/systemd.directives.xml) are generated by
Python scripts, so break "make dist" and give an useful error message when
Python or the Python lxml module is not available.
Tested:
$ ./configure --without-python && make && make dist
*** python and python-lxml module must be installed and enabled in order to make dist
make: *** [dist-check-python] Error 1
Filipe Brandenburger [Tue, 17 Jun 2014 03:54:52 +0000 (20:54 -0700)]
build-sys: configure --with-python when running distcheck
Python support is pretty much essential to create man pages, so we should make
sure that distcheck will request it during configure.
Tested: Successfully ran "make distcheck" and confirmed --with-python was
present in the ./configure run inside the unpacked distribution directory.
Filipe Brandenburger [Tue, 17 Jun 2014 03:54:50 +0000 (20:54 -0700)]
build-sys: add verbosity to python-lxml detection in ./configure
Be verbose when checking if Python module lxml is available. Also warn that
Python support will be disabled when the lxml module is not present.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=80005
Tested:
- Without python-lxml package installed:
$ ./configure
checking for python extension module directory... ${exec_prefix}/lib64/python2.7/site-packages
checking for python lxml module... no
configure: WARNING: *** python support requires python-xml module installed
- With python-lxml package installed:
$ ./configure
checking for python extension module directory... ${exec_prefix}/lib64/python2.7/site-packages
checking for python lxml module... yes
checking for PYTHON_DEVEL... yes
...
Python: yes
Python Headers: yes
Filipe Brandenburger [Tue, 17 Jun 2014 03:54:47 +0000 (20:54 -0700)]
build-sys: do not include id128-constants.h in the dist archive
File src/python-systemd/id128-constants.h is auto generated and its generation
does not require special tools, only sed. There is no point in bundling it in
the distribution archive, so let's mark it as nodist_ to have it excluded.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=80006
Tested: Successfully ran "make dist" after ./configure --without-python.
Zbigniew Jędrzejewski-Szmek [Fri, 20 Jun 2014 22:44:39 +0000 (18:44 -0400)]
util: do not strip /dev prefix twice
Cristian Rodríguez [Thu, 12 Jun 2014 19:40:30 +0000 (15:40 -0400)]
Remove libattr mentions from README
It is no longer required.
Thomas Hindoe Paaboel Andersen [Fri, 20 Jun 2014 17:32:51 +0000 (19:32 +0200)]
sd-dhcp-server: remove unused cleanup function
Removes _cleanup_dhcp_lease_free_. While the automatic cleanup
functions are great to have this one is never used and causes
a warning in clang.
Lennart Poettering [Fri, 20 Jun 2014 14:58:21 +0000 (16:58 +0200)]
core: clean-up signal reset logic when reexec
There's no need to save the old sigmask, if we are going to die. Let's
simplify this. Also, reset all the signal handlers, so that we don't
leave SIG_IGN set for some of them across reexec.
Kay Sievers [Fri, 20 Jun 2014 13:57:43 +0000 (15:57 +0200)]
tmpfiles: copy/link /usr/share/factory/ files when the source argument is omitted
Benjamin Steinwender [Sun, 8 Jun 2014 16:39:50 +0000 (18:39 +0200)]
po: add German translation
https://bugs.freedesktop.org/show_bug.cgi?id=79430
Filipe Brandenburger [Tue, 17 Jun 2014 03:54:48 +0000 (20:54 -0700)]
build-sys: fix indentation in make-man-rules generated output
This fixes the footer where 7 spaces were used on the first line of EXTRA_DIST,
but a Tab was clearly intended.
Filipe Brandenburger [Tue, 17 Jun 2014 03:54:46 +0000 (20:54 -0700)]
build-sys: add sysusers.d/systemd.conf to CLEANFILES
The sysusers.d/systemd.conf configuration file was originally introduced in
commit
1b99214789101, but it was not marked for cleanup. This caused distcheck
to complain about the file not being removed by distcleam.
Tested: Successfully ran "make distcheck" with this patchset.
Jonathan Boulle [Tue, 17 Jun 2014 00:57:05 +0000 (17:57 -0700)]
sysusers.d - fix typo in user definition file
Lennart Poettering [Fri, 20 Jun 2014 11:30:52 +0000 (13:30 +0200)]
debug-generator: add new kernel cmdline option systemd.wants= to add units to the initial transaction
Tom Gundersen [Fri, 20 Jun 2014 11:04:02 +0000 (13:04 +0200)]
networkd: link - fix memleak of icmp6 struct
Tom Gundersen [Fri, 20 Jun 2014 10:59:22 +0000 (12:59 +0200)]
networkd: veth - fix creation of veth netdev
Avoid freeing the netdev structure in the cleanup macro.
Michael Marineau [Fri, 20 Jun 2014 02:07:06 +0000 (19:07 -0700)]
shared: fix search_and_fopen with alternate roots
Update for the current behavior of path_strv_resolve which now returns
paths relative to the given root, not the full absolute paths.
Michael Marineau [Fri, 20 Jun 2014 02:07:05 +0000 (19:07 -0700)]
test: ensure conf_files_list returns absolute paths
Michael Marineau [Fri, 20 Jun 2014 02:07:04 +0000 (19:07 -0700)]
conf-files: include root in returned file paths
This restores the original root handling logic that was present prior to
112cfb18 when path expansion moved to path_strv_canonicalize_absolute.
That behavior partially went away in
12ed81d9.
Alternatively all users of conf_files_list* could be updated to
concatenate the paths themselves as unit_file_query_preset did but since
no user needs the un-concatenated form that is pointless duplication.
Michael Marineau [Fri, 20 Jun 2014 02:07:03 +0000 (19:07 -0700)]
test: unit test for using alternate roots with path_strv_resolve
Michael Marineau [Fri, 20 Jun 2014 02:07:02 +0000 (19:07 -0700)]
shared: rename path_strv_canonicalize_absolute functions
Since
12ed81d9 path_strv_canonicalize_absolute leaves the search list
relative to the given root directory instead of resolving paths to their
true location as the name implies. To better reflect this behavior
rename to the less strongly worded path_strv_resolve.
Zbigniew Jędrzejewski-Szmek [Fri, 20 Jun 2014 02:02:55 +0000 (22:02 -0400)]
getty-generator: properly escape instance names
Otherwise the add_symlink() function tries to make directories for
each slash even for the slash after the @ symbol in the final link
name, failing for /dev/3270/tty1.
Based on a patch by Werner Fink <werner@suse.de>.
Zbigniew Jędrzejewski-Szmek [Fri, 20 Jun 2014 01:48:32 +0000 (21:48 -0400)]
getty-generator: use strappenda
Allocating on the stack should be fine for the fixed number
of items.
Zbigniew Jędrzejewski-Szmek [Fri, 20 Jun 2014 01:13:56 +0000 (21:13 -0400)]
man: also describe an udev rule for bridge sysctl
Zbigniew Jędrzejewski-Szmek [Fri, 20 Jun 2014 00:43:56 +0000 (20:43 -0400)]
man: document statically loading modules for sysctl settings
https://bugzilla.redhat.com/show_bug.cgi?id=1022977
https://bugzilla.novell.com/show_bug.cgi?id=725412
Cristian Rodríguez [Sat, 23 Mar 2013 02:54:16 +0000 (03:54 +0100)]
units/systemd-sysctl.service.in: run after load-modules
Modules might or will register new sysctl options.
[zj: This mechanism of adding modules just to reliably set sysctl
attributes is not ideal. Nevertheless, sysctl for dynamically created
attributes is simply broken, and this is the easiest workaround.]
https://bugzilla.redhat.com/show_bug.cgi?id=1022977
https://bugzilla.novell.com/show_bug.cgi?id=725412
Zbigniew Jędrzejewski-Szmek [Wed, 18 Jun 2014 16:43:02 +0000 (12:43 -0400)]
util.c: simplify rm_rf_children_dangerous
Ronny Chevalier [Thu, 19 Jun 2014 22:25:58 +0000 (00:25 +0200)]
tests: add tests for strv_extendf