H.J. Lu [Wed, 25 Jul 2018 12:12:59 +0000 (05:12 -0700)]
Add tests for setcontext on the context from makecontext
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* stdlib/Makefile ((tests): Add tst-setcontext6, tst-setcontext7,
tst-setcontext8 and tst-setcontext9.
* stdlib/tst-setcontext6.c: New file.
* stdlib/tst-setcontext7.c: Likewise.
* stdlib/tst-setcontext8.c: Likewise.
* stdlib/tst-setcontext9.c: Likewise.
H.J. Lu [Wed, 25 Jul 2018 12:00:30 +0000 (05:00 -0700)]
Add a test for multiple setcontext calls
Check multiple setcontext calls.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>.
* stdlib/Makefile ((tests): Add tst-setcontext5.
* stdlib/tst-setcontext5.c: New file.
H.J. Lu [Wed, 25 Jul 2018 11:57:21 +0000 (04:57 -0700)]
Add another test for setcontext
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* stdlib/Makefile (tests): Add tst-setcontext4.
* stdlib/tst-setcontext4.c: New file.
H.J. Lu [Wed, 16 May 2018 19:28:19 +0000 (12:28 -0700)]
Add a test for multiple makecontext calls
Check multiple makecontext calls.
* stdlib/Makefile (tests): Add tst-swapcontext1.
* stdlib/tst-swapcontext1.c: New test.
H.J. Lu [Wed, 25 Jul 2018 11:46:53 +0000 (04:46 -0700)]
x86/CET: Add tests with legacy non-CET shared objects
Check binary compatibility of CET-enabled executables:
1. When CET-enabled executable is used with legacy non-CET shared object
at run-time, ld.so should disable SHSTK and put legacy non-CET shared
objects in legacy bitmap.
2. When IBT-enabled executable dlopens legacy non-CET shared object,
ld.so should put legacy shared object in legacy bitmap.
3. Use GLIBC_TUNABLES=glibc.tune.x86_shstk=[on|off|permissive] to
control how SHSTK is enabled.
* sysdeps/x86/Makefile (tests): Add tst-cet-legacy-1,
tst-cet-legacy-2, tst-cet-legacy-2a, tst-cet-legacy-3,
tst-cet-legacy-4, tst-cet-legacy-4a, tst-cet-legacy-4b
and tst-cet-legacy-4c.
(modules-names): Add tst-cet-legacy-mod-1, tst-cet-legacy-mod-2
and tst-cet-legacy-mod-4.
(CFLAGS-tst-cet-legacy-2.c): New.
(CFLAGS-tst-cet-legacy-mod-1.c): Likewise.
(CFLAGS-tst-cet-legacy-mod-2.c): Likewise.
(CFLAGS-tst-cet-legacy-3.c): Likewise.
(CFLAGS-tst-cet-legacy-4.c): Likewise.
(CFLAGS-tst-cet-legacy-mod-4.c): Likewise.
($(objpfx)tst-cet-legacy-1): Likewise.
($(objpfx)tst-cet-legacy-2): Likewise.
($(objpfx)tst-cet-legacy-2.out): Likewise.
($(objpfx)tst-cet-legacy-2a): Likewise.
($(objpfx)tst-cet-legacy-2a.out): Likewise.
($(objpfx)tst-cet-legacy-4): Likewise.
($(objpfx)tst-cet-legacy-4.out): Likewise.
($(objpfx)tst-cet-legacy-4a): Likewise.
($(objpfx)tst-cet-legacy-4a.out): Likewise.
(tst-cet-legacy-4a-ENV): Likewise.
($(objpfx)tst-cet-legacy-4b): Likewise.
($(objpfx)tst-cet-legacy-4b.out): Likewise.
(tst-cet-legacy-4b-ENV): Likewise.
($(objpfx)tst-cet-legacy-4c): Likewise.
($(objpfx)tst-cet-legacy-4c.out): Likewise.
(tst-cet-legacy-4c-ENV): Likewise.
* sysdeps/x86/tst-cet-legacy-1.c: New file.
* sysdeps/x86/tst-cet-legacy-2.c: Likewise.
* sysdeps/x86/tst-cet-legacy-2a.c: Likewise.
* sysdeps/x86/tst-cet-legacy-3.c: Likewise.
* sysdeps/x86/tst-cet-legacy-4.c: Likewise.
* sysdeps/x86/tst-cet-legacy-4a.c: Likewise.
* sysdeps/x86/tst-cet-legacy-4b.c: Likewise.
* sysdeps/x86/tst-cet-legacy-4c.c: Likewise.
* sysdeps/x86/tst-cet-legacy-mod-1.c: Likewise.
* sysdeps/x86/tst-cet-legacy-mod-2.c: Likewise.
* sysdeps/x86/tst-cet-legacy-mod-4.c: Likewise.
H.J. Lu [Wed, 25 Jul 2018 11:39:26 +0000 (04:39 -0700)]
x86: Rename __glibc_reserved2 to ssp_base in tcbhead_t
This will be used to record the current shadow stack base for shadow
stack switching by getcontext, makecontext, setcontext and swapcontext.
If the target shadow stack base is the same as the current shadow stack
base, we unwind the shadow stack. Otherwise it is a stack switch and
we look for a restore token to restore the target shadow stack.
* sysdeps/i386/nptl/tcb-offsets.sym (SSP_BASE_OFFSET): New.
* sysdeps/i386/nptl/tls.h (tcbhead_t): Replace __glibc_reserved2
with ssp_base.
* sysdeps/x86_64/nptl/tcb-offsets.sym (SSP_BASE_OFFSET): New.
* sysdeps/x86_64/nptl/tls.h (tcbhead_t): Replace __glibc_reserved2
with ssp_base.
Andreas Schwab [Tue, 24 Jul 2018 16:02:28 +0000 (18:02 +0200)]
Fix out of bounds access in findidxwc (bug 23442)
If usrc is a prefix of cp but one character shorter an out of bounds
access to usrc was done.
Adhemerval Zanella [Tue, 24 Jul 2018 21:10:32 +0000 (18:10 -0300)]
Mention ISO C threads addition
* NEWS: Add ISO C threads addition.
Florian Weimer [Tue, 24 Jul 2018 19:03:04 +0000 (21:03 +0200)]
alpha: mlock2, copy_file_range syscalls were introduced in kernel 4.13
H.J. Lu [Tue, 24 Jul 2018 19:23:03 +0000 (12:23 -0700)]
x86/CET: Extend arch_prctl syscall for CET control
CET arch_prctl bits should be defined in <asm/prctl.h> from Linux kernel
header files. Add x86 <include/asm/prctl.h> for pre-CET kernel header
files.
Note: sysdeps/unix/sysv/linux/x86/include/asm/prctl.h should be removed
if <asm/prctl.h> from the required kernel header files contains CET
arch_prctl bits.
/* CET features:
IBT: GNU_PROPERTY_X86_FEATURE_1_IBT
SHSTK: GNU_PROPERTY_X86_FEATURE_1_SHSTK
*/
/* Return CET features in unsigned long long *addr:
features: addr[0].
shadow stack base address: addr[1].
shadow stack size: addr[2].
*/
# define ARCH_CET_STATUS 0x3001
/* Disable CET features in unsigned int features. */
# define ARCH_CET_DISABLE 0x3002
/* Lock all CET features. */
# define ARCH_CET_LOCK 0x3003
/* Allocate a new shadow stack with unsigned long long *addr:
IN: requested shadow stack size: *addr.
OUT: allocated shadow stack address: *addr.
*/
# define ARCH_CET_ALLOC_SHSTK 0x3004
/* Return legacy region bitmap info in unsigned long long *addr:
address: addr[0].
size: addr[1].
*/
# define ARCH_CET_LEGACY_BITMAP 0x3005
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* sysdeps/unix/sysv/linux/x86/include/asm/prctl.h: New file.
* sysdeps/unix/sysv/linux/x86/cpu-features.c: Include
<sys/prctl.h> and <asm/prctl.h>.
(get_cet_status): Call arch_prctl with ARCH_CET_STATUS.
* sysdeps/unix/sysv/linux/x86/dl-cet.h: Include <sys/prctl.h>
and <asm/prctl.h>.
(dl_cet_allocate_legacy_bitmap): Call arch_prctl with
ARCH_CET_LEGACY_BITMAP.
(dl_cet_disable_cet): Call arch_prctl with ARCH_CET_DISABLE.
(dl_cet_lock_cet): Call arch_prctl with ARCH_CET_LOCK.
* sysdeps/x86/libc-start.c: Include <startup.h>.
Florian Weimer [Tue, 24 Jul 2018 17:06:27 +0000 (19:06 +0200)]
sh: Do not define __ASSUME_STATX
Rical Jasan [Tue, 6 Dec 2016 22:47:02 +0000 (20:47 -0200)]
Add manual documentation for threads.h
This patch updates the manual and adds a new chapter to the manual,
explaining types macros, constants and functions defined by ISO C11
threads.h standard.
[BZ# 14092]
* manual/debug.texi: Update adjacent chapter name.
* manual/probes.texi: Likewise.
* manual/threads.texi (ISO C Threads): New section.
(POSIX Threads): Convert to a section.
Adhemerval Zanella [Mon, 5 Dec 2016 20:32:11 +0000 (18:32 -0200)]
nptl: Add test cases for ISO C11 threads
This patch adds to testsuite new test cases to test all new introduced
C11 threads functions, types and macros are tested.
Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu,
arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu,
microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu,
powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu,
and x86_64-linux-gnu).
Also ran a full check on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu,
arm-linux-gnueabhf, and powerpc64le-linux-gnu.
Adhemerval Zanella <adhemerval.zanella@linaro.org>
Juan Manuel Torres Palma <jmtorrespalma@gmail.com>
[BZ #14092]
* nptl/Makefile (tests): Add new test files.
* nptl/tst-call-once.c : New file. Tests C11 functions and types.
* nptl/tst-cnd-basic.c: Likewise.
* nptl/tst-cnd-broadcast.c: Likewise.
* nptl/tst-cnd-timedwait.c: Likewise.
* nptl/tst-mtx-basic.c: Likewise.
* nptl/tst-mtx-recursive.c: Likewise.
* nptl/tst-mtx-timedlock.c: Likewise.
* nptl/tst-mtx-trylock.c: Likewise.
* nptl/tst-thrd-basic.c: Likewise.
* nptl/tst-thrd-detach.c: Likewise.
* nptl/tst-thrd-sleep.c: Likewise.
* nptl/tst-tss-basic.c: Likewise.
Adhemerval Zanella [Tue, 27 Jun 2017 14:02:16 +0000 (11:02 -0300)]
nptl: Add abilist symbols for C11 threads
This patch adds the required abilist symbols for C11 thread support.
Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu,
arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu,
microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu,
powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu,
and x86_64-linux-gnu).
Also ran a full check on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu,
arm-linux-gnueabhf, and powerpc64le-linux-gnu.
[BZ #14092]
* sysdeps/unix/sysv/linux/aarch64/libc.abilist [GLIBC_2.28]
(thrd_current, thrd_equal, thrd_sleep, thrd_yield): Add C11 thread
symbols.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/aarch64/libpthread.abilist [[GLIBC_2.28]
(call_once, cnd_broadcast, cnd_destroy, cnd_init, cnd_signal,
cnd_timedwait, cnd_wait, mtx_destroy, mtx_init, mtx_lock,
mtx_timedlock, mtx_trylock, mtx_unlokc, thrd_create, thrd_detach,
thrd_exit, thrd_join, tss_create, tss_delete, tss_get, tss_set):
Likewise.
* sysdeps/unix/sysv/linux/aarch64/libpthread.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libpthread.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libpthread.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libpthread.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libpthread.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libpthread.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libpthread.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libpthread.abilist: Likewise.
ikewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist:
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libpthread-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libpthread.abilist:
Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libpthread.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist: Likewise.
Adhemerval Zanella [Tue, 27 Jun 2017 14:00:05 +0000 (11:00 -0300)]
nptl: Add C11 threads tss_* functions
This patch adds the tss_* definitions from C11 threads (ISO/IEC 9899:2011),
more specifically tss_create, tss_delete, tss_get, tss_set, and required
types.
Mostly of the definitions are composed based on POSIX conterparts, including
tss_t (pthread_key_t).
Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu,
arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu,
microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu,
powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu,
and x86_64-linux-gnu).
Also ran a full check on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu,
arm-linux-gnueabhf, and powerpc64le-linux-gnu.
[BZ #14092]
* conform/data/threads.h-data (thread_local): New macro.
(TSS_DTOR_ITERATIONS): Likewise.
(tss_t): New type.
(tss_dtor_t): Likewise.
(tss_create): New function.
(tss_get): Likewise.
(tss_set): Likewise.
(tss_delete): Likewise.
* nptl/Makefile (libpthread-routines): Add tss_create, tss_delete,
tss_get, and tss_set objects.
* nptl/Versions (libpthread) [GLIBC_2.28]: Likewise.
* nptl/tss_create.c: New file.
* nptl/tss_delete.c: Likewise.
* nptl/tss_get.c: Likewise.
* nptl/tss_set.c: Likewise.
* sysdeps/nptl/threads.h (thread_local): New define.
(TSS_DTOR_ITERATIONS): Likewise.
(tss_t): New typedef.
(tss_dtor_t): Likewise.
(tss_create): New prototype.
(tss_get): Likewise.
(tss_set): Likewise.
(tss_delete): Likewise.
Adhemerval Zanella [Tue, 27 Jun 2017 13:55:10 +0000 (10:55 -0300)]
nptl: Add C11 threads cnd_* functions
This patch adds the cnd_* definitions from C11 threads (ISO/IEC 9899:2011),
more specifically cnd_broadcast, cnd_destroy, cnd_init, cnd_signal,
cnd_timedwait, cnd_wait, and required types.
Mostly of the definitions are composed based on POSIX conterparts, and
cnd_t is also based on internal pthreads fields, but with distinct internal
layout to avoid possible issues with code interchange (such as trying to pass
POSIX structure on C11 functions and to avoid inclusion of pthread.h). The
idea is to make it possible to share POSIX internal implementation for mostly
of the code making adjust where only required.
Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu,
arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu,
microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu,
powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu,
and x86_64-linux-gnu).
Also ran a full check on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu,
arm-linux-gnueabhf, and powerpc64le-linux-gnu.
[BZ #14092]
* conform/data/threads.h-data (cnd_t): New type.
(cnd_init): New function.
(cnd_signal): Likewise.
(cnd_broadcast): Likewise.
(cnd_wait): Likewise.
(cnd_timedwait): Likewise.
(cnd_destroy): Likewise.
* nptl/Makefile (libpthread-routines): Add cnd_broadcast,
cnd_destroy, cnd_init, cnd_signal, cnd_timedwait, and cnd_wait
object.
* nptl/Versions (libpthread) [GLIBC_2.28]: Likewise.
* nptl/cnd_broadcast.c: New file.
* nptl/cnd_destroy.c: Likewise.
* nptl/cnd_init.c: Likewise.
* nptl/cnd_signal.c: Likewise.
* nptl/cnd_timedwait.c: Likewise.
* nptl/cnd_wait.c: Likewise.
* sysdeps/nptl/threads.h (cnd_t): New type.
(cnd_init): New prototype.
(cnd_signa): Likewise.
(cnd_broadcast): Likewise.
(cnd_wait): Likewise.
(cnd_timedwait): Likewise.
(cnd_destroy): Likewise.
Adhemerval Zanella [Tue, 27 Jun 2017 13:49:51 +0000 (10:49 -0300)]
nptl: Add C11 threads call_once functions
This patch adds the call_* definitions from C11 threads (ISO/IEC 9899:2011),
more specifically call_once and required types.
Mostly of the definitions are composed based on POSIX conterparts,including
once_flag (pthread_once_t). The idea is to make possible to share POSIX
internal implementations for mostly of the code (and making adjustment only
when required).
Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu,
arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu,
microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu,
powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu,
and x86_64-linux-gnu).
Also ran a full check on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu,
arm-linux-gnueabhf, and powerpc64le-linux-gnu.
[BZ #14092]
* conform/data/threads.h-data (ONCE_FLAG_INIT): New macro.
(once_flag): New type.
(call_once): New function.
* nptl/Makefile (libpthread-routines): Add call_once object.
* nptl/Versions (libphread) [GLIBC_2.28]: Add call_once symbol.
* nptl/call_once.c: New file.
* sysdeps/nptl/threads.h (ONCE_FLAG_INIT): New define.
(once_flag): New type.
(call_once): New prototype.
Adhemerval Zanella [Tue, 27 Jun 2017 13:45:04 +0000 (10:45 -0300)]
nptl: Add C11 threads mtx_* functions
This patch adds the mtx_* definitions from C11 threads (ISO/IEC 9899:2011),
more specifically mtx_init, mtx_destroy, mtx_lock, mtx_timedlock, mtx_trylock,
mtx_unlock, and required types.
Mostly of the definitions are composed based on POSIX conterparts, and mtx_t
is also based on internal pthread fields, but with a distinct internal layout
to avoid possible issues with code interchange (such as trying to pass POSIX
structure on C11 functions and to avoid inclusion of pthread.h). The idea
is to make possible to share POSIX internal implementations for mostly of
the code (and making adjustment only when required).
Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu,
arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu,
microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu,
powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu,
and x86_64-linux-gnu).
Also ran a full check on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu,
arm-linux-gnueabhf, and powerpc64le-linux-gnu.
[BZ #14092]
* conform/data/threads.h-data (mtx_plain): New constant.
(mtx_recursive): Likewise.
(mtx_timed): Likewise.
(mtx_t): New type.
(mtx_init): New function.
(mtx_lock): Likewise.
(mtx_timedlock): Likewise.
(mtx_trylock): Likewise.
(mtx_unlock): Likewise.
(mtx_destroy): Likewise.
* nptl/Makefile (libpthread-routines): Add mtx_destroy, mtx_init,
mtx_lock, mtx_timedlock, mtx_trylock, and mtx_unlock object.
* nptl/Versions (libpthread) [GLIBC_2.28]): Add mtx_init, mtx_lock,
mtx_timedlock, mtx_trylock, mtx_unlock, and mtx_destroy.
* nptl/mtx_destroy.c: New file.
* nptl/mtx_init.c: Likewise.
* nptl/mtx_lock.c: Likewise.
* nptl/mtx_timedlock.c: Likewise.
* nptl/mtx_trylock.c: Likewise.
* nptl/mtx_unlock.c: Likewise.
* sysdeps/nptl/threads.h (mtx_plain): New enumeration.
(mtx_recursive): Likewise.
(mtx_timed): Likewise.
(mtx_t): New type.
(mtx_init): New prototype.
(mtx_lock): Likewise.
(mtx_timedlock): Likewise.
(mtx_trylock): Likewise.
(mtx_unlock): Likewise.
(mtx_destroy): Likewise.
Adhemerval Zanella [Tue, 27 Jun 2017 13:29:29 +0000 (10:29 -0300)]
nptl: Add C11 threads thrd_* functions
This patch adds the thrd_* definitions from C11 threads (ISO/IEC 9899:2011),
more specifically thrd_create, thrd_curent, rhd_detach, thrd_equal,
thrd_exit, thrd_join, thrd_sleep, thrd_yield, and required types.
Mostly of the definitions are composed based on POSIX conterparts, such as
thrd_t (using pthread_t). For thrd_* function internally direct
POSIX pthread call are used with the exceptions:
1. thrd_start uses pthread_create internal implementation, but changes
how to actually calls the start routine. This is due the difference
in signature between POSIX and C11, where former return a 'void *'
and latter 'int'.
To avoid calling convention issues due 'void *' to int cast, routines
from C11 threads are started slight different than default pthread one.
Explicit cast to expected return are used internally on pthread_create
and the result is stored back to void also with an explicit cast.
2. thrd_sleep uses nanosleep internal direct syscall to avoid clobbering
errno and to handle expected standard return codes. It is a
cancellation entrypoint to be consistent with both thrd_join and
cnd_{timed}wait.
3. thrd_yield also uses internal direct syscall to avoid errno clobbering.
Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu,
arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu,
microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu,
powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu,
and x86_64-linux-gnu).
Also ran a full check on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu,
arm-linux-gnueabhf, and powerpc64le-linux-gnu.
[BZ #14092]
* conform/Makefile (conformtest-headers-ISO11): Add threads.h.
(linknamespace-libs-ISO11): Add libpthread.a.
* conform/data/threads.h-data: New file: add C11 thrd_* types and
functions.
* include/stdc-predef.h (__STDC_NO_THREADS__): Remove definition.
* nptl/Makefile (headers): Add threads.h.
(libpthread-routines): Add new C11 thread thrd_create, thrd_current,
thrd_detach, thrd_equal, thrd_exit, thrd_join, thrd_sleep, and
thrd_yield.
* nptl/Versions (libpthread) [GLIBC_2.28]): Add new C11 thread
thrd_create, thrd_current, thrd_detach, thrd_equal, thrd_exit,
thrd_join, thrd_sleep, and thrd_yield symbols.
* nptl/descr.h (struct pthread): Add c11 field.
* nptl/pthreadP.h (ATTR_C11_THREAD): New define.
* nptl/pthread_create.c (START_THREAD_DEFN): Call C11 thread start
routine with expected function prototype.
(__pthread_create_2_1): Add C11 threads check based on attribute
value.
* sysdeps/unix/sysdep.h (INTERNAL_SYSCALL_CANCEL): New macro.
* nptl/thrd_create.c: New file.
* nptl/thrd_current.c: Likewise.
* nptl/thrd_detach.c: Likewise.
* nptl/thrd_equal.c: Likewise.
* nptl/thrd_exit.c: Likewise.
* nptl/thrd_join.c: Likewise.
* nptl/thrd_priv.h: Likewise.
* nptl/thrd_sleep.c: Likewise.
* nptl/thrd_yield.c: Likewise.
* include/threads.h: Likewise.
H.J. Lu [Tue, 24 Jul 2018 14:55:35 +0000 (07:55 -0700)]
Add <bits/indirect-return.h>
Add <bits/indirect-return.h> and include it in <ucontext.h>.
__INDIRECT_RETURN defined in <bits/indirect-return.h> indicates if
swapcontext requires special compiler treatment. The default
__INDIRECT_RETURN is empty.
On x86, when shadow stack is enabled, __INDIRECT_RETURN is defined
with indirect_return attribute, which has been added to GCC 9, to
indicate that swapcontext returns via indirect branch. Otherwise
__INDIRECT_RETURN is defined with returns_twice attribute.
When shadow stack is enabled, remove always_inline attribute from
prepare_test_buffer in string/tst-xbzero-opt.c to avoid:
tst-xbzero-opt.c: In function ‘prepare_test_buffer’:
tst-xbzero-opt.c:105:1: error: function ‘prepare_test_buffer’ can never be inlined because it uses setjmp
prepare_test_buffer (unsigned char *buf)
when indirect_return attribute isn't available.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* bits/indirect-return.h: New file.
* misc/sys/cdefs.h (__glibc_has_attribute): New.
* sysdeps/x86/bits/indirect-return.h: Likewise.
* stdlib/Makefile (headers): Add bits/indirect-return.h.
* stdlib/ucontext.h: Include <bits/indirect-return.h>.
(swapcontext): Add __INDIRECT_RETURN.
* string/tst-xbzero-opt.c (ALWAYS_INLINE): New.
(prepare_test_buffer): Use it.
Andreas Schwab [Tue, 24 Jul 2018 12:08:34 +0000 (14:08 +0200)]
Fix out-of-bounds access in IBM-1390 converter (bug 23448)
The IBM-1390 converter can consume/produce two UCS4 characters in each
loop.
H.J. Lu [Tue, 24 Jul 2018 12:20:48 +0000 (05:20 -0700)]
x86: Update vfork to pop shadow stack
The shadow stack prevents us from pushing the saved return PC onto
the stack and returning normally. Instead we pop the shadow stack
and return directly. This is the safest way to return and ensures
any stack manipulations done by the vfork'd child doesn't cause the
parent to terminate when CET is enabled.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* sysdeps/unix/sysv/linux/i386/vfork.S (SYSCALL_ERROR_HANDLER):
Redefine if shadow stack is enabled.
(SYSCALL_ERROR_LABEL): Likewise.
(__vfork): Pop shadow stack and jump back to to caller directly
when shadow stack is in use.
* sysdeps/unix/sysv/linux/x86_64/vfork.S (SYSCALL_ERROR_HANDLER):
Redefine if shadow stack is enabled.
(SYSCALL_ERROR_LABEL): Likewise.
(__vfork): Pop shadow stack and jump back to to caller directly
when shadow stack is in use.
H.J. Lu [Tue, 24 Jul 2018 12:11:59 +0000 (05:11 -0700)]
x86-64: Add endbr64 to tst-quadmod[12].S
Add endbr64 to tst-quadmod1.S and tst-quadmod2.S so that func and foo
can be called indirectly.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* sysdeps/x86_64/tst-quadmod1.S (func): Add endbr64 if IBT is
enabled.
(foo): Likewise.
* sysdeps/x86_64/tst-quadmod2.S (func) : Likewise.
(foo): Likewise.
Joseph Myers [Fri, 20 Jul 2018 16:11:15 +0000 (16:11 +0000)]
Use binutils 2.31 branch in build-many-glibcs.py.
* scripts/build-many-glibcs.py (Context.checkout): Default
binutils version to 2.31 branch.
Zong Li [Fri, 20 Jul 2018 15:30:05 +0000 (15:30 +0000)]
Change URL of gcc's tarball
After 7.1.0 version, there is no .bz2 format of gcc's tarball.
* scripts/build-many-glibcs.py (Context.checkout_tar): Change the
URL of gcc's tarball.
Florian Weimer [Fri, 20 Jul 2018 09:58:51 +0000 (11:58 +0200)]
regcomp: Fix off-by-one bug in build_equiv_class [BZ #23396]
This bug is very similar to bug 23036: The existing code assumed that
the length count included the length byte itself.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Samuel Thibault [Fri, 20 Jul 2018 00:49:44 +0000 (02:49 +0200)]
check-execstack: Permit sysdeps to xfail some libs
* scripts/check-execstack.awk: Consider `xfail' variable containing a
list
of libraries whose stack executability is expected.
* elf/Makefile ($(objpfx)check-execstack.out): Pass
$(check-execstack-xfail) to check-execstack.awk through `xfail'
variable.
* sysdeps/mach/hurd/i386/Makefile (check-execstack-xfail): Set to ld.so
libc.so libpthread.so.
Samuel Thibault [Fri, 20 Jul 2018 01:00:09 +0000 (03:00 +0200)]
hurd: Fix installed-headers tests
* sysdeps/mach/include/mach-shortcuts-hidden.h [!_ISOMAC]: Do not
declare libc hidden prototypes.
* sysdeps/mach/include/mach/mach_traps.h [!_ISOMAC]: Likewise.
Samuel Thibault [Thu, 19 Jul 2018 23:44:58 +0000 (01:44 +0200)]
Fix new file header
Thomas Schwinge [Thu, 19 Jul 2018 23:29:55 +0000 (01:29 +0200)]
hurd: Implement pipe2
* sysdeps/mach/hurd/pipe2.c: New file, copy from pipe.c. Evolve it to
implement __pipe2.
* sysdeps/mach/hurd/pipe.c (__pipe): Reimplement using __pipe2.
Thomas Schwinge [Thu, 19 Jul 2018 23:24:41 +0000 (01:24 +0200)]
hurd: SOCK_CLOEXEC and SOCK_NONBLOCK for socketpair
* sysdeps/mach/hurd/socketpair.c (__socketpair): Handle SOCK_CLOEXEC
and SOCK_NONBLOCK.
Thomas Schwinge [Thu, 19 Jul 2018 23:22:12 +0000 (01:22 +0200)]
hurd: SOCK_CLOEXEC and SOCK_NONBLOCK for socket
* sysdeps/mach/hurd/socket.c (__socket): Handle SOCK_CLOEXEC and
SOCK_NONBLOCK.
Samuel Thibault [Thu, 19 Jul 2018 23:12:08 +0000 (01:12 +0200)]
hurd: Enable thread-safe i386 atomic instructions
* sysdeps/mach/hurd/i386/tls.h (_hurd_tls_init): Set multiple_threads
to 1.
Leonardo Sandoval [Fri, 13 Jul 2018 15:45:40 +0000 (10:45 -0500)]
benchtests: improve argument parsing through argparse library
The argparse library is used on compare_bench script to improve command line
argument parsing. The 'schema validation file' is now optional, reducing by
one the number of required parameters.
* benchtests/scripts/compare_bench.py (__main__): use the argparse
library to improve command line parsing.
(__main__): make schema file as optional parameter (--schema),
defaulting to benchtests/scripts/benchout.schema.json.
(main): move out of the parsing stuff to __main_ and leave it
only as caller of main comparison functions.
H.J. Lu [Thu, 19 Jul 2018 19:04:56 +0000 (12:04 -0700)]
INSTALL: Add a note for Intel CET status
* NEWS: Add a note for Intel CET status.
* manual/install.texi: Likewise.
* INSTALL: Regenerated.
Quentin PAGÈS [Sat, 19 May 2018 15:59:08 +0000 (17:59 +0200)]
oc_FR locale: Multiple updates (bug 23140, bug 23422).
Multiple updates for Occitan language including alternative month names,
update abday and abmon, fix typos in day, fix d_fmt, correct LC_NAME,
and use “copy "ca_ES"” as LC_COLLATE.
[BZ #23140]
* localedata/locales/oc_FR (mon): Rename to...
(alt_mon): This, then update October (typo fix).
(mon): New content (genitive case, month names preceded by
"de" or "d’").
[BZ #23422]
* localedata/locales/oc_FR (abday): Update all items.
(day): Update Wednesday and Saturday (typo fixes).
(abmon): Update all items, except May.
(d_fmt): Update "%d.%m.%Y" -> "%d/%m/%Y".
(LC_IDENTIFICATION): Bump the revision number and date.
Keep the "category" entries in alphabetic order.
(LC_ADDRESS): Remove no longer needed comment.
(LC_COLLATE): Use “copy "ca_ES"”.
(LC_NAME): Set the correct values of "name_fmt", "name_mr", and
"name_mrs".
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Joseph Myers [Wed, 18 Jul 2018 21:04:12 +0000 (21:04 +0000)]
Avoid insecure usage of tmpnam in tests.
Various glibc testcases use tmpnam in ways subject to race conditions
(generate a temporary file name, then later open that file without
O_EXCL).
This patch fixes those tests to use mkstemp - generally a minimal
local fix to use mkstemp instead of tmpnam, rather than a larger fix
to use other testsuite infrastructure for temporary files. The
unchanged use of tmpnam in posix/wordexp-test.c would fail safe in the
event of a race (it's generating a name for use with mkdir rather than
for a file to be opened for writing).
Tested for x86_64.
* grp/tst_fgetgrent.c: Include <unistd.h>.
(main): Use mkstemp instead of tmpnam.
* io/test-utime.c (main): Likewise.
* posix/annexc.c (macrofile): Change to modifiable array.
(get_null_defines): Use mkstemp instead of tmpnam. Do not remove
macrofile here.
* posix/bug-getopt1.c: Include <stdlib.h>.
(do_test): Use mkstemp instead of tmpnam.
* posix/bug-getopt2.c: Include <stdlib.h>.
(do_test): Use mkstemp instead of tmpnam.
* posix/bug-getopt3.c: Include <stdlib.h>.
(do_test): Use mkstemp instead of tmpnam.
* posix/bug-getopt4.c: Include <stdlib.h>.
(do_test): Use mkstemp instead of tmpnam.
* posix/bug-getopt5.c: Include <stdlib.h>.
(do_test): Use mkstemp instead of tmpnam.
* stdio-common/bug7.c: Include <stdlib.h> and <unistd.h>.
(main): Use mkstemp instead of tmpnam.
* stdio-common/tst-fdopen.c: Include <stdlib.h>.
(main): Use mkstemp instead of tmpnam.
* stdio-common/tst-ungetc.c: Include <stdlib.h>.
(main): use mkstemp instead of tmpnam.
* stdlib/isomac.c (macrofile): Change to modifiable array.
(get_null_defines): Use mkstemp instead of tmpnam. Do not remove
macrofile here.
H.J. Lu [Wed, 18 Jul 2018 18:34:35 +0000 (11:34 -0700)]
x86/CET: Document glibc.tune.x86_ibt and glibc.tune.x86_shstk
* manual/tunables.texi: Document glibc.tune.x86_ibt and
glibc.tune.x86_shstk.
H.J. Lu [Wed, 18 Jul 2018 16:52:40 +0000 (09:52 -0700)]
Intel CET: Document --enable-cet
* NEWS: Mention --enable-cet.
* manual/install.texi: Document --enable-cet.
* INSTALL: Regenerated.
H.J. Lu [Wed, 18 Jul 2018 15:07:24 +0000 (08:07 -0700)]
x86-64: Use _CET_NOTRACK in memcmp-sse4.S
* sysdeps/x86_64/multiarch/memcmp-sse4.S (BRANCH_TO_JMPTBL_ENTRY):
Add _CET_NOTRACK before indirect jump to jump table.
H.J. Lu [Wed, 18 Jul 2018 15:04:04 +0000 (08:04 -0700)]
i386: Use _CET_NOTRACK in memset-sse2-rep.S
* sysdeps/i386/i686/multiarch/memset-sse2-rep.S
(BRANCH_TO_JMPTBL_ENTRY): Add _CET_NOTRACK before indirect jump
to jump table.
H.J. Lu [Wed, 18 Jul 2018 15:03:07 +0000 (08:03 -0700)]
i386: Use _CET_NOTRACK in strcat-sse2.S
* sysdeps/i386/i686/multiarch/strcat-sse2.S
(BRANCH_TO_JMPTBL_ENTRY): Add _CET_NOTRACK before indirect jump
to jump table.
H.J. Lu [Wed, 18 Jul 2018 15:02:15 +0000 (08:02 -0700)]
i386: Use _CET_NOTRACK in strcpy-sse2.S
* sysdeps/i386/i686/multiarch/strcpy-sse2.S
(BRANCH_TO_JMPTBL_ENTRY): Add _CET_NOTRACK before indirect jump
to jump table.
H.J. Lu [Wed, 18 Jul 2018 15:00:49 +0000 (08:00 -0700)]
i386: Use _CET_NOTRACK in memcpy-ssse3.S
* sysdeps/i386/i686/multiarch/memcpy-ssse3.S
(BRANCH_TO_JMPTBL_ENTRY): Add _CET_NOTRACK before indirect jump
to jump table.
H.J. Lu [Wed, 18 Jul 2018 14:59:54 +0000 (07:59 -0700)]
i386: Use _CET_NOTRACK in memcpy-ssse3-rep.S
* sysdeps/i386/i686/multiarch/memcpy-ssse3-rep.S
(BRANCH_TO_JMPTBL_ENTRY): Add _CET_NOTRACK before indirect jump
to jump table.
(BRANCH_TO_JMPTBL_ENTRY_TAIL): Likewise.
H.J. Lu [Wed, 18 Jul 2018 14:58:53 +0000 (07:58 -0700)]
i386: Use _CET_NOTRACK in memcmp-sse4.S
* sysdeps/i386/i686/multiarch/memcmp-sse4.S
(BRANCH_TO_JMPTBL_ENTRY): Add _CET_NOTRACK before indirect jump
to jump table.
H.J. Lu [Wed, 18 Jul 2018 14:57:50 +0000 (07:57 -0700)]
i386: Use _CET_NOTRACK in memset-sse2.S
* sysdeps/i386/i686/multiarch/memset-sse2.S
(BRANCH_TO_JMPTBL_ENTRY): Add _CET_NOTRACK before indirect jump
to jump table.
H.J. Lu [Wed, 18 Jul 2018 14:54:45 +0000 (07:54 -0700)]
i386: Use _CET_NOTRACK in i686/memcmp.S
* sysdeps/i386/i686/memcmp.S (memcmp): Add _CET_NOTRACK before
indirect jump to jump table.
H.J. Lu [Wed, 18 Jul 2018 13:39:32 +0000 (06:39 -0700)]
x86-64: Use _CET_NOTRACK in memcpy-ssse3.S
* sysdeps/x86_64/multiarch/memcpy-ssse3.S
(BRANCH_TO_JMPTBL_ENTRY): Add _CET_NOTRACK before indirect jump
to jump table.
(MEMCPY): Likewise.
H.J. Lu [Wed, 18 Jul 2018 13:38:10 +0000 (06:38 -0700)]
x86-64: Use _CET_NOTRACK in memcpy-ssse3-back.S
* sysdeps/x86_64/multiarch/memcpy-ssse3-back.S
(BRANCH_TO_JMPTBL_ENTRY): Add _CET_NOTRACK before indirect jump
to jump table.
(MEMCPY): Likewise.
H.J. Lu [Wed, 18 Jul 2018 13:36:06 +0000 (06:36 -0700)]
x86-64: Use _CET_NOTRACK in strcmp-sse42.S
* sysdeps/x86_64/multiarch/strcmp-sse42.S (STRCMP_SSE42): Add
_CET_NOTRACK before indirect jump to jump table.
H.J. Lu [Wed, 18 Jul 2018 13:32:54 +0000 (06:32 -0700)]
x86-64: Use _CET_NOTRACK in strcpy-sse2-unaligned.S
* sysdeps/x86_64/multiarch/strcpy-sse2-unaligned.S
(BRANCH_TO_JMPTBL_ENTRY): Add _CET_NOTRACK before indirect jump
to jump table.
H.J. Lu [Wed, 18 Jul 2018 13:29:21 +0000 (06:29 -0700)]
x86_64: Use _CET_NOTRACK in strcmp.S
* sysdeps/x86_64/strcmp.S (STRCMP): Add _CET_NOTRACK before
indirect jump to jump table.
Valery Timiriliyev [Fri, 6 Jul 2018 05:46:13 +0000 (14:46 +0900)]
New locale: Yakut (Sakha) for Russia (sah_RU) [BZ #22241]
* localedata/Makefile (test-input): Add sah_RU.UTF-8.
(LOCALES): Likewise.
* localedata/SUPPORTED (sah_RU/UTF-8): New entry.
* localedata/locales/sah_RU: New file.
* localedata/sah_RU.UTF-8.in: New file.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
H.J. Lu [Tue, 17 Jul 2018 23:11:13 +0000 (16:11 -0700)]
i386: Add _CET_ENDBR to indirect jump targets in add_n.S/sub_n.S
i386 add_n.S and sub_n.S use a trick to implment jump tables with LEA.
We can't use conditional branches nor normal jump tables since jump
table entries use EFLAGS set by jump table index. This patch adds
_CET_ENDBR to indirect jump targets and adjust destination for
_CET_ENDBR.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* sysdeps/i386/add_n.S: Include <sysdep.h>, instead of
"sysdep.h".
(__mpn_add_n): Save and restore %ebx if IBT is enabed. Add
_CET_ENDBR to indirect jump targets and adjust jump destination
for _CET_ENDBR.
* sysdeps/i386/i686/add_n.S: Include <sysdep.h>, instead of
"sysdep.h".
(__mpn_add_n): Save and restore %ebx if IBT is enabed. Add
_CET_ENDBR to indirect jump targets and adjust jump destination
for _CET_ENDBR.
* sysdeps/i386/sub_n.S: Include <sysdep.h>, instead of
"sysdep.h".
(__mpn_sub_n): Save and restore %ebx if IBT is enabed. Add
_CET_ENDBR to indirect jump targets and adjust jump destination
for _CET_ENDBR.
H.J. Lu [Tue, 17 Jul 2018 23:08:35 +0000 (16:08 -0700)]
x86-64: Add _CET_ENDBR to STRCMP_SSE42
Add _CET_ENDBR to STRCMP_SSE42, which is called indirectly, to support
IBT.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* sysdeps/x86_64/multiarch/strcmp-sse42.S (STRCMP_SSE42): Add
_CET_ENDBR.
H.J. Lu [Tue, 17 Jul 2018 23:07:03 +0000 (16:07 -0700)]
x86: Add _CET_ENDBR to functions in dl-tlsdesc.S
Add _CET_ENDBR to functions in dl-tlsdesc.S, which are called indirectly,
to support IBT.
Tested on i686 and x86-64.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* sysdeps/i386/dl-tlsdesc.S (_dl_tlsdesc_return): Add
_CET_ENDBR.
(_dl_tlsdesc_undefweak): Likewise.
(_dl_tlsdesc_dynamic): Likewise.
(_dl_tlsdesc_resolve_abs_plus_addend): Likewise.
(_dl_tlsdesc_resolve_rel): Likewise.
(_dl_tlsdesc_resolve_rela): Likewise.
(_dl_tlsdesc_resolve_hold): Likewise.
* sysdeps/x86_64/dl-tlsdesc.S (_dl_tlsdesc_return): Likewise.
(_dl_tlsdesc_undefweak): Likewise.
(_dl_tlsdesc_dynamic): Likewise.
(_dl_tlsdesc_resolve_rela): Likewise.
(_dl_tlsdesc_resolve_hold): Likewise.
H.J. Lu [Tue, 17 Jul 2018 23:04:41 +0000 (16:04 -0700)]
x86: Add _CET_ENDBR to functions in crti.S
Add _CET_ENDBR to functions in crti.S, which are called indirectly, to
support IBT.
Tested on i686 and x86-64.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* sysdeps/i386/crti.S (_init): Add _CET_ENDBR.
(_fini): Likewise.
* sysdeps/x86_64/crti.S (_init): Likewise.
(_fini): Likewise.
Rafal Luzynski [Tue, 30 Jan 2018 11:31:12 +0000 (12:31 +0100)]
os_RU: Add alternative month names (bug 23140).
[BZ #23140]
* localedata/locales/os_RU (mon): Rename to...
(alt_mon): This.
(mon): Import from CLDR (genitive case).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
H.J. Lu [Tue, 17 Jul 2018 11:16:19 +0000 (04:16 -0700)]
x86: Always include <dl-cet.h>/cet-tunables.h> for --enable-cet
Always include <dl-cet.h> and cet-tunables.h> when CET is enabled.
Otherwise, configure glibc with --enable-cet --disable-tunables will
fail to build.
* sysdeps/x86/cpu-features.c: Always include <dl-cet.h> and
cet-tunables.h> when CET is enabled.
H.J. Lu [Mon, 16 Jul 2018 21:08:15 +0000 (14:08 -0700)]
x86: Support IBT and SHSTK in Intel CET [BZ #21598]
Intel Control-flow Enforcement Technology (CET) instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-en
forcement-technology-preview.pdf
includes Indirect Branch Tracking (IBT) and Shadow Stack (SHSTK).
GNU_PROPERTY_X86_FEATURE_1_IBT is added to GNU program property to
indicate that all executable sections are compatible with IBT when
ENDBR instruction starts each valid target where an indirect branch
instruction can land. Linker sets GNU_PROPERTY_X86_FEATURE_1_IBT on
output only if it is set on all relocatable inputs.
On an IBT capable processor, the following steps should be taken:
1. When loading an executable without an interpreter, enable IBT and
lock IBT if GNU_PROPERTY_X86_FEATURE_1_IBT is set on the executable.
2. When loading an executable with an interpreter, enable IBT if
GNU_PROPERTY_X86_FEATURE_1_IBT is set on the interpreter.
a. If GNU_PROPERTY_X86_FEATURE_1_IBT isn't set on the executable,
disable IBT.
b. Lock IBT.
3. If IBT is enabled, when loading a shared object without
GNU_PROPERTY_X86_FEATURE_1_IBT:
a. If legacy interwork is allowed, then mark all pages in executable
PT_LOAD segments in legacy code page bitmap. Failure of legacy code
page bitmap allocation causes an error.
b. If legacy interwork isn't allowed, it causes an error.
GNU_PROPERTY_X86_FEATURE_1_SHSTK is added to GNU program property to
indicate that all executable sections are compatible with SHSTK where
return address popped from shadow stack always matches return address
popped from normal stack. Linker sets GNU_PROPERTY_X86_FEATURE_1_SHSTK
on output only if it is set on all relocatable inputs.
On a SHSTK capable processor, the following steps should be taken:
1. When loading an executable without an interpreter, enable SHSTK if
GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on the executable.
2. When loading an executable with an interpreter, enable SHSTK if
GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on interpreter.
a. If GNU_PROPERTY_X86_FEATURE_1_SHSTK isn't set on the executable
or any shared objects loaded via the DT_NEEDED tag, disable SHSTK.
b. Otherwise lock SHSTK.
3. After SHSTK is enabled, it is an error to load a shared object
without GNU_PROPERTY_X86_FEATURE_1_SHSTK.
To enable CET support in glibc, --enable-cet is required to configure
glibc. When CET is enabled, both compiler and assembler must support
CET. Otherwise, it is a configure-time error.
To support CET run-time control,
1. _dl_x86_feature_1 is added to the writable ld.so namespace to indicate
if IBT or SHSTK are enabled at run-time. It should be initialized by
init_cpu_features.
2. For dynamic executables:
a. A l_cet field is added to struct link_map to indicate if IBT or
SHSTK is enabled in an ELF module. _dl_process_pt_note or
_rtld_process_pt_note is called to process PT_NOTE segment for
GNU program property and set l_cet.
b. _dl_open_check is added to check IBT and SHSTK compatibilty when
dlopening a shared object.
3. Replace i386 _dl_runtime_resolve and _dl_runtime_profile with
_dl_runtime_resolve_shstk and _dl_runtime_profile_shstk, respectively if
SHSTK is enabled.
CET run-time control can be changed via GLIBC_TUNABLES with
$ export GLIBC_TUNABLES=glibc.tune.x86_shstk=[permissive|on|off]
$ export GLIBC_TUNABLES=glibc.tune.x86_ibt=[permissive|on|off]
1. permissive: SHSTK is disabled when dlopening a legacy ELF module.
2. on: IBT or SHSTK are always enabled, regardless if there are IBT or
SHSTK bits in GNU program property.
3. off: IBT or SHSTK are always disabled, regardless if there are IBT or
SHSTK bits in GNU program property.
<cet.h> from CET-enabled GCC is automatically included by assembly codes
to add GNU_PROPERTY_X86_FEATURE_1_IBT and GNU_PROPERTY_X86_FEATURE_1_SHSTK
to GNU program property. _CET_ENDBR is added at the entrance of all
assembly functions whose address may be taken. _CET_NOTRACK is used to
insert NOTRACK prefix with indirect jump table to support IBT. It is
defined as notrack when _CET_NOTRACK is defined in <cet.h>.
[BZ #21598]
* configure.ac: Add --enable-cet.
* configure: Regenerated.
* elf/Makefille (all-built-dso): Add a comment.
* elf/dl-load.c (filebuf): Moved before "dynamic-link.h".
Include <dl-prop.h>.
(_dl_map_object_from_fd): Call _dl_process_pt_note on PT_NOTE
segment.
* elf/dl-open.c: Include <dl-prop.h>.
(dl_open_worker): Call _dl_open_check.
* elf/rtld.c: Include <dl-prop.h>.
(dl_main): Call _rtld_process_pt_note on PT_NOTE segment. Call
_rtld_main_check.
* sysdeps/generic/dl-prop.h: New file.
* sysdeps/i386/dl-cet.c: Likewise.
* sysdeps/unix/sysv/linux/x86/cpu-features.c: Likewise.
* sysdeps/unix/sysv/linux/x86/dl-cet.h: Likewise.
* sysdeps/x86/cet-tunables.h: Likewise.
* sysdeps/x86/check-cet.awk: Likewise.
* sysdeps/x86/configure: Likewise.
* sysdeps/x86/configure.ac: Likewise.
* sysdeps/x86/dl-cet.c: Likewise.
* sysdeps/x86/dl-procruntime.c: Likewise.
* sysdeps/x86/dl-prop.h: Likewise.
* sysdeps/x86/libc-start.h: Likewise.
* sysdeps/x86/link_map.h: Likewise.
* sysdeps/i386/dl-trampoline.S (_dl_runtime_resolve): Add
_CET_ENDBR.
(_dl_runtime_profile): Likewise.
(_dl_runtime_resolve_shstk): New.
(_dl_runtime_profile_shstk): Likewise.
* sysdeps/linux/x86/Makefile (sysdep-dl-routines): Add dl-cet
if CET is enabled.
(CFLAGS-.o): Add -fcf-protection if CET is enabled.
(CFLAGS-.os): Likewise.
(CFLAGS-.op): Likewise.
(CFLAGS-.oS): Likewise.
(asm-CPPFLAGS): Add -fcf-protection -include cet.h if CET
is enabled.
(tests-special): Add $(objpfx)check-cet.out.
(cet-built-dso): New.
(+$(cet-built-dso:=.note)): Likewise.
(common-generated): Add $(cet-built-dso:$(common-objpfx)%=%.note).
($(objpfx)check-cet.out): New.
(generated): Add check-cet.out.
* sysdeps/x86/cpu-features.c: Include <dl-cet.h> and
<cet-tunables.h>.
(TUNABLE_CALLBACK (set_x86_ibt)): New prototype.
(TUNABLE_CALLBACK (set_x86_shstk)): Likewise.
(init_cpu_features): Call get_cet_status to check CET status
and update dl_x86_feature_1 with CET status. Call
TUNABLE_CALLBACK (set_x86_ibt) and TUNABLE_CALLBACK
(set_x86_shstk). Disable and lock CET in libc.a.
* sysdeps/x86/cpu-tunables.c: Include <cet-tunables.h>.
(TUNABLE_CALLBACK (set_x86_ibt)): New function.
(TUNABLE_CALLBACK (set_x86_shstk)): Likewise.
* sysdeps/x86/sysdep.h (_CET_NOTRACK): New.
(_CET_ENDBR): Define if not defined.
(ENTRY): Add _CET_ENDBR.
* sysdeps/x86/dl-tunables.list (glibc.tune): Add x86_ibt and
x86_shstk.
* sysdeps/x86_64/dl-trampoline.h (_dl_runtime_resolve): Add
_CET_ENDBR.
(_dl_runtime_profile): Likewise.
Rogerio Alves [Mon, 16 Jul 2018 18:07:10 +0000 (15:07 -0300)]
powerpc64: Always restore TOC on longjmp [BZ #21895]
This patch changes longjmp to always restore the TOC pointer (r2 register)
to the caller frame on powerpc64 and powerpc64le. This is related to bug
21895 that reports a situation where you have a static longjmp to a
shared object file.
[BZ #21895]
* sysdeps/powerpc/powerpc64/__longjmp-common.S: Remove condition code for
restoring r2 in longjmp.
* sysdeps/powerpc/powerpc64/Makefile: Added tst-setjmp-bug21895-static to
test list.
Added rules to build test tst-setjmp-bug21895-static.
Added module setjmp-bug21895 and rules to build a shared object from it.
* sysdeps/powerpc/powerpc64/setjmp-bug21895.c: New test file.
* sysdeps/powerpc/powerpc64/tst-setjmp-bug21895-static.c: New test file.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Wilco Dijkstra [Mon, 16 Jul 2018 16:50:09 +0000 (17:50 +0100)]
Improve strstr performance
Improve strstr performance. Strstr tends to be slow because it uses
many calls to memchr and a slow byte loop to scan for the next match.
Performance is significantly improved by using strnlen on larger blocks
and using strchr to search for the next matching character. strcasestr
can also use strnlen to scan ahead, and memmem can use memchr to check
for the next match.
On the GLIBC bench tests the performance gains on Cortex-A72 are:
strstr: +25%
strcasestr: +4.3%
memmem: +18%
On a 256KB dataset strstr performance improves by 67%, strcasestr by 47%.
Reviewd-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
H.J. Lu [Sun, 15 Jul 2018 15:48:40 +0000 (08:48 -0700)]
x86_64: Undef SHADOW_STACK_POINTER_OFFSET last
Since SHADOW_STACK_POINTER_OFFSET is defined in jmp_buf-ssp.h, we must
undef SHADOW_STACK_POINTER_OFFSET after including <jmp_buf-ssp.h>.
* sysdeps/unix/sysv/linux/x86_64/____longjmp_chk.S: Undef
SHADOW_STACK_POINTER_OFFSET after including <jmp_buf-ssp.h>.
H.J. Lu [Sat, 14 Jul 2018 12:59:29 +0000 (05:59 -0700)]
x86: Support shadow stack pointer in setjmp/longjmp
Save and restore shadow stack pointer in setjmp and longjmp to support
shadow stack in Intel CET. Use feature_1 in tcbhead_t to check if
shadow stack is enabled before saving and restoring shadow stack pointer.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* sysdeps/i386/__longjmp.S: Include <jmp_buf-ssp.h>.
(__longjmp): Restore shadow stack pointer if shadow stack is
enabled, SHADOW_STACK_POINTER_OFFSET is defined and __longjmp
isn't defined for __longjmp_cancel.
* sysdeps/i386/bsd-_setjmp.S: Include <jmp_buf-ssp.h>.
(_setjmp): Save shadow stack pointer if shadow stack is enabled
and SHADOW_STACK_POINTER_OFFSET is defined.
* sysdeps/i386/bsd-setjmp.S: Include <jmp_buf-ssp.h>.
(setjmp): Save shadow stack pointer if shadow stack is enabled
and SHADOW_STACK_POINTER_OFFSET is defined.
* sysdeps/i386/setjmp.S: Include <jmp_buf-ssp.h>.
(__sigsetjmp): Save shadow stack pointer if shadow stack is
enabled and SHADOW_STACK_POINTER_OFFSET is defined.
* sysdeps/unix/sysv/linux/i386/____longjmp_chk.S: Include
<jmp_buf-ssp.h>.
(____longjmp_chk): Restore shadow stack pointer if shadow stack
is enabled and SHADOW_STACK_POINTER_OFFSET is defined.
* sysdeps/unix/sysv/linux/x86/Makefile (gen-as-const-headers):
Remove jmp_buf-ssp.sym.
* sysdeps/unix/sysv/linux/x86_64/____longjmp_chk.S: Include
<jmp_buf-ssp.h>.
(____longjmp_chk): Restore shadow stack pointer if shadow stack
is enabled and SHADOW_STACK_POINTER_OFFSET is defined.
* sysdeps/x86/Makefile (gen-as-const-headers): Add
jmp_buf-ssp.sym.
* sysdeps/x86/jmp_buf-ssp.sym: New dummy file.
* sysdeps/x86_64/__longjmp.S: Include <jmp_buf-ssp.h>.
(__longjmp): Restore shadow stack pointer if shadow stack is
enabled, SHADOW_STACK_POINTER_OFFSET is defined and __longjmp
isn't defined for __longjmp_cancel.
* sysdeps/x86_64/setjmp.S: Include <jmp_buf-ssp.h>.
(__sigsetjmp): Save shadow stack pointer if shadow stack is
enabled and SHADOW_STACK_POINTER_OFFSET is defined.
H.J. Lu [Sat, 14 Jul 2018 12:53:05 +0000 (05:53 -0700)]
x86: Rename __glibc_reserved1 to feature_1 in tcbhead_t [BZ #22563]
feature_1 has X86_FEATURE_1_IBT and X86_FEATURE_1_SHSTK bits for CET
run-time control.
CET_ENABLED, IBT_ENABLED and SHSTK_ENABLED are defined to 1 or 0 to
indicate that if CET, IBT and SHSTK are enabled.
<tls-setup.h> is added to set up thread-local data.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
[BZ #22563]
* nptl/pthread_create.c: Include <tls-setup.h>.
(__pthread_create_2_1): Call tls_setup_tcbhead.
* sysdeps/generic/tls-setup.h: New file.
* sysdeps/x86/nptl/tls-setup.h: Likewise.
* sysdeps/i386/nptl/tcb-offsets.sym (FEATURE_1_OFFSET): New.
* sysdeps/x86_64/nptl/tcb-offsets.sym (FEATURE_1_OFFSET):
Likewise.
* sysdeps/i386/nptl/tls.h (tcbhead_t): Rename __glibc_reserved1
to feature_1.
* sysdeps/x86_64/nptl/tls.h (tcbhead_t): Likewise.
* sysdeps/x86/sysdep.h (X86_FEATURE_1_IBT): New.
(X86_FEATURE_1_SHSTK): Likewise.
(CET_ENABLED): Likewise.
(IBT_ENABLED): Likewise.
(SHSTK_ENABLED): Likewise.
Rafal Luzynski [Wed, 11 Jul 2018 21:25:15 +0000 (23:25 +0200)]
dsb_DE locale: Fix syntax error and add tests (bug 23208).
Fixed syntax error in the collation rules of Lower Sorbian language.
Collation test added in order to test the bugs like this early.
Reported-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
[BZ #23208]
* localedata/Makefile (test-input): Add dsb_DE.UTF-8.
(LOCALES): Likewise.
* localedata/dsb_DE.UTF-8.in: New file.
* localedata/locales/dsb_DE (LC_COLLATE): Fix syntax error.
Florian Weimer [Thu, 12 Jul 2018 13:01:43 +0000 (15:01 +0200)]
nptl: Use __mprotect consistently for _STACK_GROWS_UP
Florian Weimer [Wed, 11 Jul 2018 06:59:51 +0000 (08:59 +0200)]
Install <bits/statx.h> header
Mike FABIAN [Tue, 10 Jul 2018 09:25:48 +0000 (11:25 +0200)]
Put the correct Unicode version number 11.0.0 into the generated files
In some places there was still the old Unicode version 10.0.0 in the files.
* localedata/charmaps/UTF-8: Use correct Unicode version 11.0.0 in comment.
* localedata/locales/i18n_ctype: Use correct Unicode version in comments
and headers.
* localedata/unicode-gen/utf8_gen.py: Add option to specify Unicode version
* localedata/unicode-gen/Makefile: Use option to specify Unicode version
for utf8_gen.py
Florian Weimer [Tue, 10 Jul 2018 14:14:45 +0000 (16:14 +0200)]
Add the statx function
Adhemerval Zanella [Tue, 10 Jul 2018 12:24:40 +0000 (09:24 -0300)]
Comment tst-ofdlocks-compat expected failure in some Linux releases
As pointed out in a libc-alpha thread [1], the misc/tst-ofdlocks-compat
may fail in some specific Linux releases. This patch adds a comment
along with a link to discussion in the test source code.
No changes are expected.
* sysdeps/unix/sysv/linux/tst-ofdlocks-compat.c: Add a comment about
a kernel issue which lead to test failure in some cases.
[1] https://sourceware.org/ml/libc-alpha/2018-07/msg00243.html
Florian Weimer [Tue, 10 Jul 2018 09:18:26 +0000 (11:18 +0200)]
regexec: Fix off-by-one bug in weight comparison [BZ #23036]
Each weight is prefixed by its length, and the length does not include
itself in the count. This can be seen clearly from the find_idx
function in string/strxfrm_l.c, for example. The old code behaved as if
the length itself counted, thus comparing an additional byte after the
weight, leading to spurious comparison failures and incorrect further
partitioning of character equivalence classes.
Florian Weimer [Tue, 10 Jul 2018 09:03:08 +0000 (11:03 +0200)]
Fix copyright years in recent commits
Florian Weimer [Fri, 6 Jul 2018 12:23:15 +0000 (14:23 +0200)]
nss_files: Fix re-reading of long lines [BZ #18991]
Use the new __libc_readline_unlocked function to pick up
reading at the same line in case the buffer needs to be enlarged.
Florian Weimer [Fri, 6 Jul 2018 14:53:48 +0000 (16:53 +0200)]
libio: Implement internal function __libc_readline_unlocked
This is a variant of fgets which fails with ERANGE if the
buffer is too small, and the buffer length is given as an
argument of type size_t.
This function will be useful for implementing NSS file reading
operations. Compared to a direct implementation using the public API,
it avoids an lseek system call in case the line terminator can be
found in the internal read buffer.
Szabolcs Nagy [Thu, 28 Jun 2018 14:30:32 +0000 (15:30 +0100)]
aarch64: add HWCAP_ATOMICS to HWCAP_IMPORTANT
This enables searching shared libraries in atomics/ when the hardware
supports LSE atomics of armv8.1 so one can provide optimized variants
of libraries in a portable way.
LSE atomics does not affect library abi, the new instructions can
interoperate with old ones.
I considered the earlier comments on the patch
https://sourceware.org/ml/libc-alpha/2018-04/msg00400.html
https://sourceware.org/ml/libc-alpha/2018-04/msg00625.html
It turns out that the way glibc dynamic linker decides on the search
path is not very flexible: it wants to use hwcap bits and associated
strings. So some targets reuse hwcap bits for glibc internal purposes
to affect the search logic. But hwcap is an interface with the kernel,
glibc should not allocate bits in it for its internal logic as that
limits future hwcap extensions and confusing to users who expect to see
hwcap bits in ifunc resolvers. Instead of rewriting the dynamic linker
path logic (which affects all targets) this patch just uses the existing
mechanism, however this means that the path name has to be the hwcap
name "atomics" and cannot be changed to something more meaningful to
users.
It is hard to tell how much performance benefit this can give, in
principle armv8.1 atomics can be better optimized in the hardware, so it
can make a difference for synchronization heavy code. On some systems
such multilib setup may be the only viable way to get optimized
libraries used.
* sysdeps/unix/sysv/linux/aarch64/dl-procinfo.h (HWCAP_IMPORTANT): Add
HWCAP_ATOMICS.
Szabolcs Nagy [Thu, 28 Jun 2018 13:43:07 +0000 (14:43 +0100)]
aarch64: Remove HWCAP_CPUID from HWCAP_IMPORTANT
This partially reverts
commit
f82e9672ad89ea1ef40bbe1af71478e255e87c5e
Author: Siddhesh Poyarekar <siddhesh@sourceware.org>
aarch64: Allow overriding HWCAP_CPUID feature check using HWCAP_MASK
The idea was to make it possible to disable cpuid based ifunc resolution
in glibc by changing the hwcap mask which the user could already control.
However the hwcap mask has an orthogonal role: it specifies additional
library search paths for the dynamic linker. So "cpuid" got added to
the search paths when it was set in the default mask (HWCAP_IMPORTANT),
which is not useful behaviour, the hwcap masking should not be reused
in the cpu features code.
Meanwhile there is a tunable to set the cpu explicitly so it is possible
to disable the cpuid based dispatch without using a hwcap mask:
GLIBC_TUNABLES=glibc.tune.cpu=generic
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c (init_cpu_features):
Use dl_hwcap without masking.
* sysdeps/unix/sysv/linux/aarch64/dl-procinfo.h (HWCAP_IMPORTANT):
Remove HWCAP_CPUID.
Florian Weimer [Fri, 6 Jul 2018 14:31:24 +0000 (16:31 +0200)]
conform/conformtest.pl: Escape literal braces in regular expressions
This suppresses Perl warnings like these:
Unescaped left brace in regex is deprecated here (and will be fatal in
Perl 5.32), passed through in regex; marked by <-- HERE in m/^element
*({ <-- HERE ([^}]*)}|([^{ ]*)) *({([^}]*)}|([^{ ]*)) *([A-Za-z0-9_]*)
*(.*)/ at conformtest.pl line 370.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Amit Pawar [Fri, 6 Jul 2018 13:55:36 +0000 (09:55 -0400)]
Use AVX_Fast_Unaligned_Load from Zen onwards.
From Zen onwards this will be enabled. It was disabled for the
Excavator case and will remain disabled.
Reviewd-by: Carlos O'Donell <carlos@redhat.com>
Florian Weimer [Thu, 5 Jul 2018 20:57:45 +0000 (22:57 +0200)]
Build csu/elf-init.c and csu/static-reloc.c with stack protector
This does not change generated code (with -fstack-protector-strong), but
is important for formal compiler flags compliance.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Florian Weimer [Thu, 5 Jul 2018 17:28:11 +0000 (19:28 +0200)]
Compile debug/stack_chk_fail_local.c with stack protector
The resulting object file is statically linked into applications, so
it is desirable to have (formal) stack protector coverage there.
Maciej W. Rozycki [Thu, 5 Jul 2018 17:06:43 +0000 (18:06 +0100)]
libc-abis: Define ABSOLUTE ABI [BZ #19818][BZ #23307]
Define a new ABSOLUTE ABI for static linker's use with EI_ABIVERSION
where correct absolute (SHN_ABS) symbol run-time load semantics is
required. This way it can be ensured at static link time that a program
or DSO will not suffer from previous semantics where absolute symbols
were relocated by the base address, or symbols whose `st_value' is zero
silently ignored leading to a confusing "undefined symbol" error message
at load time, and instead "ELF file ABI version invalid" is printed with
old dynamic loaders, making it clear that there is an ABI version
incompatibility.
[BZ #19818]
[BZ #23307]
* libc-abis (ABSOLUTE): New ABI.
* sysdeps/unix/sysv/linux/mips/libc-abis (ABSOLUTE): New ABI.
* NEWS: Mention the new ABI.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Florian Weimer [Thu, 5 Jul 2018 16:59:02 +0000 (18:59 +0200)]
Add renameat2 function [BZ #17662]
The implementation falls back to renameat if renameat2 is not available
in the kernel (or in the kernel headers) and the flags argument is zero.
Without kernel support, a non-zero argument returns EINVAL, not ENOSYS.
This mirrors what the kernel does for invalid renameat2 flags.
Adhemerval Zanella [Wed, 4 Jul 2018 20:26:22 +0000 (17:26 -0300)]
posix: Fix bug-regex33 after regex sync
On some platforms the inclusion of regex-internal.h in bug-regex33
testcase show a MAX redefinition if test-skeleton.c is include later.
This patch fixes by removing regex-internal.h inclusion and using
SBC_MAX value directly.
Checked on aarch64-linux-gnu.
* posix/bug-regex33.c: Fix build after regex sync.
Carlos O'Donell [Mon, 14 May 2018 12:25:46 +0000 (08:25 -0400)]
locale: XFAIL newlocale usage in static binary (Bug 23164)
There is a glibc optimization which allows for locale categories
to be removed during static compilation. There have been various
bugs for this support over the years, with bug 16915 being the
most recent. The solution there was to emit a reference to all the
categories to avoid any being removed. This fix, although it's in
the generic __nl_langinfo_l function, doesn't appear to be enough
to fix the case for a statically linked program that uses newlocale
and nl_langinfo_l. This commit doesn't fix the problem, but it does
add a XFAIL'd test case such that a fix can be applied against this
and the XFAIL removed. It's not entirely clear that the problem is
the same as that which was seen in bug 16915.
Florian Weimer [Wed, 4 Jul 2018 13:27:24 +0000 (15:27 +0200)]
testrun.sh: Implement --tool=strace, --tool=valgrind
$(file …) appears to be the only convenient way to create files
with newlines and make substitution variables. This needs make 4.0
(released in 2013), so update the requirement to match.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Adhemerval Zanella [Wed, 20 Dec 2017 11:47:44 +0000 (09:47 -0200)]
posix: Sync gnulib regex implementation
This patch syncs the regex implementation with gnulib (commit 0ee5212).
Only two changes in GLIBC regex testing are required:
1. posix/bug-regex28.c: as previously discussed [1] the change of
expected results on the pattern should be safe.
2. posix/PCRE.tests: the ERE (a)|\1 is malformed (in the sense that
the \1 doesn't mean anything) and although current GLIBC accepts
it has undefined behavior. This patch removes the specific test.
This sync contains some patches from thread 'Regex: Make libc regex
more usable outside GLIBC.' [2] which have been pushed upstream in
gnulib. This patches also fixes some regex issues (BZ #23233,
BZ #21163, BZ #18986, BZ #13762) and I did not add testcases for
both #23233 and #13762 because I couldn't think a simple way to
trigger the expected failure path to trigger them.
Checked on x86_64-linux-gnu and i686-linux-gnu.
[BZ #23233]
[BZ #21163]
[BZ #18986]
[BZ #13762]
* posix/Makefile (tests): Add bug-regex37 and bug-regex38.
* posix/PCRE.tests: Remove invalid test.
* posix/bug-regex28.c: Fix expected values for used syntax.
* posix/bug-regex37.c: New file.
* posix/bug-regex38.c: Likewise.
* posix/regcomp.c: Sync with gnulib.
* posix/regex.c: Likewise.
* posix/regex.h: Likewise.
* posix/regex_internal.c: Likewise.
* posix/regex_internal.h: Likewise.
* posix/regexec.c: Likewise.
[1] https://sourceware.org/ml/libc-alpha/2017-12/msg00807.html
[2] https://sourceware.org/ml/libc-alpha/2017-12/msg00237.html
Mike FABIAN [Mon, 18 Jun 2018 16:23:44 +0000 (18:23 +0200)]
Bug 23308: Update to Unicode 11.0.0
Unicode 11.0.0 Support: Character encoding, character type info, and
transliteration tables are all updated to Unicode 11.0.0, using
the generator scripts contributed by Mike FABIAN (Red Hat).
Some info about the number of characters added:
Total added characters in newly generated CHARMAP: 684
Total added characters in newly generated WIDTH: 119
alpha: Added 380 characters in new ctype which were not in old ctype
combining: Added 56 characters in new ctype which were not in old ctype
combining_level3: Added 37 characters in new ctype which were not in old ctype
graph: Added 684 characters in new ctype which were not in old ctype
lower: Added 82 characters in new ctype which were not in old ctype
print: Added 684 characters in new ctype which were not in old ctype
punct: Added 304 characters in new ctype which were not in old ctype
tolower: Added 79 characters in new ctype which were not in old ctype
totitle: Added 33 characters in new ctype which were not in old ctype
toupper: Added 79 characters in new ctype which were not in old ctype
upper: Added 79 characters in new ctype which were not in old ctype
No characters were removed.
[BZ #23308]
* unicode-gen/Makefile (UNICODE_VERSION): Set to 11.0.0.
* localedata/unicode-gen/DerivedCoreProperties.txt: Update to Unicode 11.0.0.
* localedata/unicode-gen/EastAsianWidth.txt: likewise.
* localedata/unicode-gen/PropList.txt: likewise.
* localedata/unicode-gen/UnicodeData.txt: likewise.
* localedata/charmaps/UTF-8: Regenerate.
* localedata/locales/i18n_ctype: likewise.
* localedata/locales/tr_TR: likewise.
* localedata/locales/translit_circle: likewise.
* localedata/locales/translit_cjk_compat: likewise.
* localedata/locales/translit_combining: likewise.
* localedata/locales/translit_compat: likewise.
* localedata/locales/translit_font: likewise.
* localedata/locales/translit_fraction: likewise.
Florian Weimer [Tue, 3 Jul 2018 16:29:16 +0000 (18:29 +0200)]
stdio-common/tst-printf.c: Remove part under a non-free license [BZ #23363]
The license does not allow modification.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Adhemerval Zanella [Mon, 2 Jul 2018 19:45:53 +0000 (16:45 -0300)]
Fix hurd expected fcntl version
Different than Linux, hurd does not need the OFD locks fix from
06ab719d30b (since OFD locks are current Linux specific). This in
turn allows hurd to not provide a fcntl compat symbol.
Checked on a i686-gnu with check-abi.
* sysdeps/mach/hurd/i386/libc.abilist [GLIBC_2.28] (fcntl): Remove
symbol.
Gabriel F. T. Gomes [Fri, 29 Jun 2018 01:38:55 +0000 (22:38 -0300)]
ldbl-128ibm-compat: Add printf_size
Since the addition of the _Float128 API, strfromf128 and printf_size use
__printf_fp to print _Float128 values. This is achieved by setting the
'is_binary128' member of the 'printf_info' structure to one. Now that
the format of long double on powerpc64le is getting a third option, this
mechanism is reused for long double values that have binary128 format
(i.e.: when -mabi=ieeelongdouble).
This patch adds __printf_sizeieee128 as an exported symbol, but doesn't
provide redirections from printf_size, yet. All redirections will be
installed in a future commit, once all other functions that print or
read long double values with binary128 format are ready. In
__printf_fp, when 'is_binary128' is one, the floating-point argument is
treated as if it was of _Float128 type, regardless of the value of
'is_long_double', thus __printf_sizeieee128 sets 'is_binary128' to the
same value of 'is_long_double'. Otherwise, double values would not be
printed correctly.
Tested for powerpc64le.
Szabolcs Nagy [Wed, 13 Jun 2018 14:07:21 +0000 (15:07 +0100)]
Use uint32_t sign in single precision math error handling functions
Ideally sign should be bool, but sometimes (e.g. in powf) it's more
efficient to pass a non-zero value than 1 to indicate that the sign
should be set. The fixed size int is less ambigous than unsigned
long.
* sysdeps/ieee754/flt-32/e_powf.c (__powf): Use uint32_t.
(exp2f_inline): Likewise.
* sysdeps/ieee754/flt-32/math_config.h (__math_oflowf): Likewise.
(__math_uflowf): Likewise.
(__math_may_uflowf): Likewise.
(__math_divzerof): Likewise.
(__math_invalidf): Likewise.
* sysdeps/ieee754/flt-32/math_errf.c (xflowf): Likewise.
(__math_oflowf): Likewise.
(__math_uflowf): Likewise.
(__math_may_uflowf): Likewise.
(__math_divzerof): Likewise.
(__math_invalidf): Likewise.
Carlos O'Donell [Fri, 22 Jun 2018 13:28:47 +0000 (09:28 -0400)]
libc: Extend __libc_freeres framework (Bug 23329).
The __libc_freeres framework does not extend to non-libc.so objects.
This causes problems in general for valgrind and mtrace detecting
unfreed objects in both libdl.so and libpthread.so. This change is
a pre-requisite to properly moving the malloc hooks out of malloc
since such a move now requires precise accounting of all allocated
data before destructors are run.
This commit adds a proper hook in libc.so.6 for both libdl.so and
for libpthread.so, this ensures that shm-directory.c which uses
freeit () to free memory is called properly. We also remove the
nptl_freeres hook and fall back to using weak-ref-and-check idiom
for a loaded libpthread.so, thus making this process similar for
all DSOs.
Lastly we follow best practice and use explicit free calls for
both libdl.so and libpthread.so instead of the generic hook process
which has undefined order.
Tested on x86_64 with no regressions.
Signed-off-by: DJ Delorie <dj@redhat.com>
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
Rajalakshmi Srinivasaraghavan [Sat, 30 Jun 2018 01:24:34 +0000 (06:54 +0530)]
Add long double input for strfmon test
This patch adds long double type inputs in strfmon_l test
which will help in long double migration.
Tested for powerpc64le.
Michael Wolf [Thu, 7 Jun 2018 23:26:43 +0000 (01:26 +0200)]
New locale: Lower Sorbian (dsb_DE) [BZ #23208]
[BZ #23208]
* localedata/SUPPORTED (dsb_DE/UTF-8): New entry.
* localedata/locales/dsb_DE: New file.
Rafal Luzynski [Fri, 24 Feb 2017 02:13:15 +0000 (03:13 +0100)]
hy_AM: Add alternative month names (bug 23140).
This locale already contained correct data in mon array. Updated from
CLDR to start the month names with the lowercase letters.
alt_mon is a new import from CLDR. The change has been consulted
off-list with a native speaker.
[BZ #23140]
* localedata/locales/hy_AM (mon): Synchronize with CLDR (lowercase,
genitive case).
(alt_mon): New entry, import from CLDR (nominative case).
Sylvain Lesage [Fri, 29 Jun 2018 18:55:59 +0000 (20:55 +0200)]
es_BO locale: Change LC_PAPER to en_US (bug 22996).
[BZ #22996]
* localedata/locales/es_BO (LC_PAPER): Change to “copy "en_US"”.
Siddhesh Poyarekar [Fri, 29 Jun 2018 17:15:59 +0000 (22:45 +0530)]
aarch64,falkor: Use vector registers for memcpy
Vector registers perform better than scalar register pairs for copying
data so prefer them instead. This results in a time reduction of over
50% (i.e. 2x speed improvemnet) for some smaller sizes for memcpy-walk.
Larger sizes show improvements of around 1% to 2%. memcpy-random shows
a very small improvement, in the range of 1-2%.
* sysdeps/aarch64/multiarch/memcpy_falkor.S (__memcpy_falkor):
Use vector registers.
Siddhesh Poyarekar [Fri, 29 Jun 2018 17:15:07 +0000 (22:45 +0530)]
aarch64,falkor: Use vector registers for memmove
Vector registers perform much better for moves compared to pairs of
registers on falkor, so use them instead. This results in a time
reduction of up to 50% (i.e. 2x improvement) for a lot of the smaller
sizes, i.e. up to 1K in memmove-walk. Improvements for larger sizes are
smaller, at about 1%-2%.
* sysdeps/aarch64/multiarch/memmove_falkor.S
(__memcpy_falkor): Use vector registers.