docs: Correct opensbi-domain property name

Replace the commas with dashes to correct the name.

Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi: Implement system suspend

Fill the implementation of the system suspend ecall. A platform
implementation of the suspend callbacks is still required for this
to do anything.

Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi: Add system_suspend_allowed domain property

Only privileged domains should be allowed to suspend the entire
system. Give the root domain this property by default and allow
other domains to be given the property by specifying it in the
DT.

Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi: Add system suspend skeleton

Add the SUSP extension probe and ecall support, but for now the
system suspend function is just a stub.

Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi_hsm: Export some functions

A coming patch can make use of a few internal hsm functions if
we export them.

Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi_hsm: Remove unnecessary include

Also remove a superfluous semicolon and add a blank line.

Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi_hsm: Move misplaced comment

While non-retentive suspend is not allowed for M-mode, the comment
at the top of sbi_hsm_hart_suspend() implied suspend wasn't allowed
for M-mode at all. Move the comment above the mode check which is
inside a suspend type is non-retentive check.

Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi_hsm: Ensure errors are consistent with spec

HSM functions define when SBI_ERR_INVALID_PARAM should be returned.
Ensure it's not used for reasons that don't meet the definitions by
using the catch-all code, SBI_ERR_FAILED, for those reasons instead.
Also, in one case sbi_hart_suspend() may have returned SBI_ERR_DENIED,
which isn't defined for that function at all. Use SBI_ERR_FAILED for
that case too.

Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi_hsm: Don't try to restore state on failed change

When a state change fails there's no need to restore the original
state as it remains the same.

Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi_hsm: Factor out invalid state detection

Remove some redundant code by creating an invalid state detection
macro.

No functional change intended.

Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

docs: domain_support: Update the DT example

commit 3e2f573e707e ("lib: utils: Disallow non-root domains from adding M-mode regions")
added access permission check in __fdt_parse_region(). With the
existing DT example in the doc OpenSBI won't boot anymore.

Let's update the DT example so that it can work out of the box.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/fdt/fdt_domain: Simplify region access permission check

The region access permission check in __fdt_parse_region() can be
simplified as masking SBI_DOMAIN_MEMREGION_{M,SU}_ACCESS_MASK is
enough.

While we are here, update the confusing comments to match the codes.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi/sbi_domain: cosmetic style fixes

Minor updates to the comments for language and style fixes.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi: sbi_ecall: Check the range of SBI error

We should also check if the return error code is greater than 0
(SBI_SUCCESS), as this is an invalid error.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: generic: renesas: rzfive: Configure the PMA region

On the Renesas RZ/Five SoC by default we want to configure 128MiB of memory
ranging from 0x58000000 as a non-cacheable + bufferable region in the PMA
and populate this region as PMA reserve DT node with shared DMA pool and
no-map flags set so that Linux drivers requesting any DMA'able memory go
through this region.

PMA node passed to the above stack:

        reserved-memory {
            #address-cells = <2>;
            #size-cells = <2>;
            ranges;

            pma_resv0@58000000 {
                compatible = "shared-dma-pool";
                reg = <0x0 0x58000000 0x0 0x08000000>;
                no-map;
                linux,dma-default;
            };
        };

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: generic: renesas: rzfive: Add support to configure the PMA

I/O Coherence Port (IOCP) provides an AXI interface for connecting
external non-caching masters, such as DMA controllers. The accesses
from IOCP are coherent with D-Caches and L2 Cache.

IOCP is a specification option and is disabled on the Renesas RZ/Five
SoC due to this reason IP blocks using DMA will fail.

The Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
block that allows dynamic adjustment of memory attributes in the runtime.
It contains a configurable amount of PMA entries implemented as CSR
registers to control the attributes of memory locations in interest.
Below are the memory attributes supported:
* Device, Non-bufferable
* Device, bufferable
* Memory, Non-cacheable, Non-bufferable
* Memory, Non-cacheable, Bufferable
* Memory, Write-back, No-allocate
* Memory, Write-back, Read-allocate
* Memory, Write-back, Write-allocate
* Memory, Write-back, Read and Write-allocate

More info about PMA (section 10.3):
Link: http://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf
As a workaround for SoCs with IOCP disabled CMO needs to be handled by
software. Firstly OpenSBI configures the memory region as
"Memory, Non-cacheable, Bufferable" and passes this region as a global
shared dma pool as a DT node. With DMA_GLOBAL_POOL enabled all DMA
allocations happen from this region and synchronization callbacks are
implemented to synchronize when doing DMA transactions.

Example PMA region passed as a DT node from OpenSBI:
    reserved-memory {
        #address-cells = <2>;
        #size-cells = <2>;
        ranges;

        pma_resv0@58000000 {
            compatible = "shared-dma-pool";
            reg = <0x0 0x58000000 0x0 0x08000000>;
            no-map;
            linux,dma-default;
        };
    };

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

include: sbi: Remove extid parameter from vendor_ext_provider() callback

The extid parameter of vendor_ext_provider() is redundant so let us
remove it.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>

lib: sbi: Align SBI vendor extension id with mvendorid CSR

As-per the SBI specification, the lower 24bits of the SBI vendor
extension id is same as lower 24bits of the mvendorid CSR.

We update the SBI vendor extension id checking based on above.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>

lib: sbi_hart: Enable hcontext and scontext

According to the description in "riscv-state-enable[0]", to access
h/scontext in S-Mode, we need to enable the 57th bit.

If it is not enabled, an "illegal instruction" error will occur.

Link: https://github.com/riscv/riscv-state-enable/blob/a28bfae443f350d5b4c42874f428367d5b322ffe/content.adoc
Signed-off-by: Nylon Chen <nylon.chen@sifive.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

docs: fix typo in fw.md

In docs/firmware/fw.md, there's a configuration parameter called
FW_TEXT_ADDR, which actually should be FW_TEXT_START, so fix it.

Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils: fdt_fixup: Fix compile error

When building with GCC-10 or older versions, it throws the following
error:

 CC-DEP    platform/generic/lib/utils/fdt/fdt_fixup.dep
 CC        platform/generic/lib/utils/fdt/fdt_fixup.o
lib/utils/fdt/fdt_fixup.c: In function 'fdt_reserved_memory_fixup':
lib/utils/fdt/fdt_fixup.c:376:2: error: label at end of compound statement
  376 |  next_entry:
      |  ^~~~~~~~~~

Remove the goto statement.

Resolves: https://github.com/riscv-software-src/opensbi/issues/288

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>

include: fdt/fdt_helper: Change fdt_get_address() to return root.next_arg1

In sbi_domain_finalize(), when locating the coldboot hart's domain,
the coldboot hart's scratch->arg1 will be overwritten by the domain
configuration. However scratch->arg1 holds the FDT address of the
coldboot hart, and is still being accessed by fdt_get_address() in
later boot process. scratch->arg1 could then contain completely
garbage and lead to a crash.

To fix this, we change fdt_get_address() to return root domain's
next_arg1 as the FDT pointer.

Resolves: https://github.com/riscv-software-src/opensbi/issues/281
Fixes: b1678af210dc ("lib: sbi: Add initial domain support")
Reported-by: Marouene Boubakri <marouene.boubakri@nxp.com>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: generic/andes: Fix ae350.c header dependency

The code calls various macros from riscv_asm.h which is not directly
included. Fix such dependency.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: generic/allwinner: Fix sun20i-d1.c header dependency

The code calls various macros from riscv_asm.h and sbi_scratch.h
which are not directly included. Fix such dependency.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/fdt: Fix fdt_pmu.c header dependency

The code calls sbi_scratch_thishart_ptr() from sbi_scratch.h which
is not directly included. Fix such dependency.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi: Speed-up sbi_printf() and friends using nputs()

The sbi_printf() is slow for semihosting because it prints one
character at a time. To speed-up sbi_printf() for semihosting,
we use a temporary buffer and nputs().

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>

lib: utils/serial: Implement console_puts() for semihosting

We implement console_puts() for semihosting serial driver to speed-up
semihosting based prints.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>

lib: sbi: Add console_puts() callback in the console device

We add console_puts() callback in the console device which allows
console drivers (such as semihosting) to implement a specialized
way to output character string.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>

lib: sbi: Implement SBI debug console extension

We implement SBI debug console extension as one of the replacement
SBI extensions. This extension is only available when OpenSBI platform
provides a console device to generic library.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>

lib: sbi: Add sbi_domain_check_addr_range() function

We add sbi_domain_check_addr_range() helper function to check
whether a given address range is accessible under a particular
domain.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>

lib: sbi: Add sbi_ngets() function

We add new sbi_ngets() which help us read characters into a
physical memory location.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>

lib: sbi: Add sbi_nputs() function

We add new sbi_nputs() which help us print a fixed number of characters
from a physical memory location.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Xiang W <wxjstz@126.com>

include: Add defines for SBI debug console extension

We add SBI debug console extension related defines to the
SBI ecall interface header.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Xiang W <wxjstz@126.com>

include: sbi: Fix BSWAPx() macros for big-endian host

The BSWAPx() macros won't do any swapping for big-endian host
because the EXTRACT_BYTE() macro will pickup bytes in reverse
order. Also, the EXTRACT_BYTE() will generate compile error
for constants.

To fix this, we get remove the EXTRACT_BYTE() macro and re-write
BSWAPx() using simple mask and shift operations.

Fixes: 09b34d8cca51 ("include: Add support for byteorder/endianness
conversion")
Reported-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>

include: types: Add typedefs for endianness

If any variable/memory-location follows certain
endianness then its important to annotate it properly
so that proper conversion can be done before read/write
from that variable/memory.

Also, use these new typedefs in libfdt_env.h for deriving
its own custom fdtX_t types

Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/fdt: Use byteorder conversion functions in libfdt_env.h

FDT follows big-endian and CPU can be little or big
endian as per the implementation.
libfdt_env.h defines function for conversion between
fdt and cpu byteorder according to the endianness.

Currently, libfdt_env.h defines custom byte swapping
macros and then undefines them. Instead, use the generic
endianness conversion functions

Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

include: Add support for byteorder/endianness conversion

Define macros general byteorder conversion
Define functions for endianness conversion
from general byteorder conversion macros

Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Makefile: Add missing .dep files for fw_*.elf.ld

Since we don't currently create these, changes to fw_base.ldS do not
cause the preprocessed fw_*.elf.ld files to be rebuilt, and thus
incremental builds can end up failing with missing symbols if crossing
the recent commits that introduced _fw_rw_offset and then replaced it
with _fw_rw_start.

Reported-by: Ben Dooks <ben.dooks@sifive.com>
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi: Ensure domidx_to_domain_table is null-terminated

sbi_domain_for_each() requires domidx_to_domain_table[] to be
null-terminated. Allocate one extra element which will always
be null.

Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils: Mark only the largest region as reserved in FDT

In commit 230278dcf, RX and RW regions were marked separately.
When the RW region grows (e.g. with more harts) and it isn't a
power-of-two, sbi_domain_memregion_init will upgrade the region
to the next power-of-two. This will make RX and RW both start
at the same base address, like so (with 64 harts):
Domain0 Region01 : 0x0000000080000000-0x000000008001ffff M: (R,X) S/U: ()
Domain0 Region02 : 0x0000000080000000-0x00000000800fffff M: (R,W) S/U: ()

This doesn't break the permission enforcement because of static
priorities in PMP but makes the kernel complain about the regions
overlapping each other. Like so:
[    0.000000] OF: reserved mem: OVERLAP DETECTED!
[    0.000000] mmode_resv0@80000000 (0x0000000080000000--0x0000000080020000) \
overlaps with mmode_resv1@80000000 (0x0000000080000000--0x0000000080100000)

To fix this warning, among the multiple regions having same base
address but different sizes, add only the largest region as reserved
region during fdt fixup.

Fixes: 230278dcf (lib: sbi: Add separate entries for firmware RX and RW regions)
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi_hsm: Use csr_set to restore the MIP

If we use the csr_write to restore the MIP, we may clear the SEIP.
In generic behavior of QEMU, if the pending bits of PLIC are set and we
clear the SEIP, the QEMU may not set it back immediately. It may cause
the interrupts won't be handled anymore until the new interrupts arrived
and QEMU set the bits back.

Signed-off-by: Nick Hu <nick.hu@sifive.com>
Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

firmware: Not to clear all the MIP

In generic behavior of QEMU, if the pending bits of PLIC are still set and
we clear the SEIP, the QEMU may not set the SEIP back immediately and the
interrupt may not be handled anymore until the new interrupts arrived and
QEMU set the SEIP back which is a generic behavior in QEMU.

Signed-off-by: Nick Hu <nick.hu@sifive.com>
Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

firmware: Fix fw_rw_offset computation in fw_base.S

It seems BFD just does totally nonsensical things for SHN_ABS symbols
when producing position-independent outputs (both -pie and -shared)
for various historical reasons, and so SHN_ABS symbols are still
subject to relocation as far as BFD is concerned (except AArch64,
which fixes it in limited cases that don’t apply here...).

The above affects the _fw_rw_offset provided through fw_base.ldS
linker script which results in OpenSBI firmware failing to boot
when loaded at an address different from FW_TEXT_START.

Fixes: c10e3fe5f9a1 ("firmware: Add RW section offset in scratch")
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reported-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>

platform: generic: allwinner: Advertise nonretentive suspend

Add D1's nonretentive suspend state to the devicetree so S-mode software
knows about it and can use it.

Latency and power measurements were taken on an Allwinner Nezha board:
 - Entry latency was measured from the beginning of sbi_ecall_handler()
   to before the call to wfi() in sun20i_d1_hart_suspend().
 - Exit latency was measured from the beginning of sbi_init() to before
   the call to sbi_hart_switch_mode() in init_warmboot().
 - There was a 17.5 mW benefit from non-retentive suspend compared to
   WFI, with a 170 mW cost during the 107 us entry/exit period. This
   provides a break-even point around 1040 us. Residency includes entry
   latency, so round this up to 1100 us.
 - The hardware power sequence latency (after the WFI) is assumed to be
   negligible, so set the wakeup latency to the exit latency.

Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>

lib: utils: Add fdt_add_cpu_idle_states() helper function

Since the availability and latency properties of CPU idle states depend
on the specific SBI HSM implementation, it is appropriate that the idle
states are added to the devicetree at runtime by that implementation.

This helper function adds a platform-provided array of idle states to
the devicetree, following the SBI idle state binding.

Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>

platform: renesas/rzfive: Configure Local memory regions as part of root domain

Renesas RZ/Five RISC-V SoC has Instruction local memory and Data local
memory (ILM & DLM) mapped between region 0x30000 - 0x4FFFF. When a
virtual address falls within this range, the MMU doesn't trigger a page
fault; it assumes the virtual address is a physical address which can
cause undesired behaviours for statically linked applications/libraries.

To avoid this, add the ILM/DLM memory regions to the root domain region
of the PMPU with permissions set to 0x0 for S/U modes so that any access
to these regions gets blocked and for M-mode we grant full access (R/W/X).

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi: Add separate entries for firmware RX and RW regions

Add two entries for firmware in the root domain:

1. TEXT: fw_start to _fw_rw_offset with RX permissions
2. DATA: _fw_rw_offset to fw_size with RW permissions

These permissions are still not enforced from M-mode but lay
the ground work for enforcing them for M-mode. SU-mode don't
have any access to these regions.

Sample output:
 Domain0 Region01  : 0x0000000080000000-0x000000008001ffff M: (R,X) S/U: ()
 Domain0 Region02  : 0x0000000080020000-0x000000008003ffff M: (R,W) S/U: ()

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi: Print the RW section offset

Print the RW section offset when firmware base and size is
being printed.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

firmware: Add RW section offset in scratch

Add the RW section offset, provided by _fw_rw_offset symbol,
to the scratch structure. This will be used to program
separate pmp entry for RW section.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

firmware: Move dynsym and reladyn sections to RX section

Currently, the dynsym and reladyn sections are under RW data.
They are moved to the Read-only/Executable region.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

firmware: Split RO/RX and RW sections

Split the RO/RX and RW sections so that they can have
independent pmp entries with required permissions. The
split size is ensured to be a power-of-2 as required by
pmp.

_fw_rw_offset symbol marks the beginning of the data
section.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils: Fix reserved memory node for firmware memory

The commit 9e0ba090 introduced more fine grained permissions for memory
regions and did not update the fdt_reserved_memory_fixup() function. As
a result, the fdt_reserved_memory_fixup continued to use the older coarse
permissions which causes the reserved memory node to be not inserted
into the DT.

To fix the above issue, we correct the flags used for memory region
permission checks in the fdt_reserved_memory_fixup() function.

Fixes: 9e0ba090 ("include: sbi: Fine grain the permissions for M and SU modes")
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: reset/fdt_reset_atcwdt200: Use defined macros and function in atcsmu.h

Reuse the smu related macros and function in atcsmu.h.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: andes/ae350: Implement hart hotplug using HSM extension

Add hart_start() and hart_stop() callbacks for the multi-core ae350
platform, it utilizes the ATCSMU to put the harts into power-gated
deep sleep mode. The programming sequence is stated as below:

1. Set the wakeup events to PCSm_WE
2. Set the sleep command to PCSm_CTL
3. Set the reset vector to HARTm_RESET_VECTOR_{LO|HI}
4. Write back and invalidate D-cache by executing the CCTL command L1D_WBINVAL_ALL
5. Disable I/D-cache by clearing mcache_ctl.{I|D}C_EN
6. Disable D-cache coherency by clearing mcache_ctl_.DC_COHEN
7. Wait for mcache_ctl.DC_COHSTA to be cleared to ensure the previous step is completed
8. Execute WFI

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils: atcsmu: Add Andes System Management Unit support

This patch adds atcsmu support for Andes AE350 platforms. The SMU
provides system management capabilities, including clock, reset
and power control based on power domain partitions.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

include: types: add always inline compiler attribute

Provide __always_inline to sbi_types header.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi_hsm: handle failure when hart_stop returns SBI_ENOTSUPP

Make use of generic warm-boot path when platform hart_stop callback
returns SBI_ENOTSUPP, in case certain hart can not turn off its
power domain, or it detects some error occured in power management
unit, it can fall through warm-boot flow and wait for interrupt in
sbi_hsm_hart_wait().

Also improves comment in sbi_hsm_hart_wait().

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

docs: generic.md: fix typo of andes-ae350

Fix hyperlink due to the typo.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: generic: allwinner: Fix PLIC array bounds

The two referenced commits passed incorrect bounds to the PLIC save/
restore functions, causing out-of-bounds memory access. The functions
expect "num" to be the 1-based number of interrupt sources, equivalent
to the "riscv,ndev" devicetree property. Thus, "num" must be strictly
smaller than the 0-based size of the array storing the register values.

However, the referenced commits incorrectly passed in the unmodified
size of the array as "num". Fix this by reducing PLIC_SOURCES (matching
"riscv,ndev" on this platform), while keeping the same array sizes.

Addresses-Coverity-ID: 1530251 ("Out-of-bounds access")
Addresses-Coverity-ID: 1530252 ("Out-of-bounds access")
Fixes: 8509e46ca63a ("lib: utils/irqchip: plic: Ensure no out-of-bound access in priority save/restore helpers")
Fixes: 9a2eeb4aaeac ("lib: utils/irqchip: plic: Ensure no out-of-bound access in context save/restore helpers")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Anup Patel <anup@brainfault.org>

docs: Update domain's region permissions and requirements

Updated the various permissions bits available for domains
defined in DT node and restrictions on them.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>

lib: utils: Add M-mode {R/W} flags to the MMIO regions

Add the M-mode readable/writable flags to mmio regions
of various drivers.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>

lib: utils: Disallow non-root domains from adding M-mode regions

The M-mode regions can only be added to the root domain. The non-root
domains shouldn't be able to add them from FDT.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>

lib: utils: Use SU-{R/W/X} flags for region permissions during parsing

Use the newer SU-{R/W/X} flags for checking and assigning region
permissions.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>

lib: sbi: Modify the boot time region flag prints

With the finer permission semantics, the region access
permissions must be displayed separately for M and SU mode.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>

lib: sbi: Use finer permission sematics to decide on PMP bits

Use the fine grained permission bits to decide if the region
permissions are to be enforced on all modes. Also use the new
permission bits for deciding on R/W/X bits in pmpcfg register.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>

lib: sbi: Add permissions for the firmware start till end

Change the zero flag to M-mode R/W/X flag for the firmware
region.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>

lib: sbi: Use finer permission semantics for address validation

Use the fine grained permisssion semantics for address validation
of a given region.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>

include: sbi: Fine grain the permissions for M and SU modes

Split the permissions for M-mode and SU-mode. This would
help if different sections of OpenSBI need to be given
different permissions and if M-mode has different permisssions
than the SU-mode over a region.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>

docs: domain_support: Use capital letter for privilege modes

The RISC-V convention for the privilege mode is capital letter, like
'M-mode', instead of 'm-mode'.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi_hsm: Rename 'priv' argument to 'arg1'

'priv' argument of sbi_hsm_hart_start() and sbi_hsm_hart_suspend()
may mislead people to think it stands for 'privilege mode', but it
is not. Change it to 'arg1' to clearly indicate the a1 register.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

generic/starfive: Add Starfive JH7110 platform implementation

Add Starfive JH7110 platform implementation

Signed-off-by: Wei Liang Lim <weiliang.lim@starfivetech.com>
Reviewed-by: Chee Hong Ang <cheehong.ang@starfivetech.com>
Reviewed-by: Jun Liang Tan <junliang.tan@starfivetech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: generic: Allow platform_override to perform firmware init

We add a generic platform override callback to allow platform specific firmware init.

Signed-off-by: Wei Liang Lim <weiliang.lim@starfivetech.com>
Reviewed-by: Chee Hong Ang <cheehong.ang@starfivetech.com>
Reviewed-by: Jun Liang Tan <junliang.tan@starfivetech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: generic: Allow platform_override to select cold boot HART

We add a generic platform override callback to allow platform specific
selection of cold boot HART.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>

lib: sbi: Allow platform to influence cold boot HART selection

We add an optional cold_boot_allowed() platform callback which allows
platform support to decide which HARTs can do cold boot initialization.

If this platform callback is not available then any HART can do cold
boot initialization.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>

lib: utils/sys: Allow custom HTIF base address for RV32

commit 6dde43584f18 ("lib: utils/sys: Extend HTIF library to allow custom base address")
forgot to update do_tohost_fromhost() codes for RV32, which still
accesses the HTIF registers using the ELF symbol address directly.

Fixes: 6dde43584f18 ("lib: utils/sys: Extend HTIF library to allow custom base address")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Makefile: Remove -N ldflag to prevent linker RWX warning

-N option coalesce all sections into single LOAD segment which causes
data and other sections to have executable permission causing warning
with new binutils ld 2.39.
New ld emits warning when any segment have all three permissions RWX.

ld.bfd: warning: test.elf has a LOAD segment with RWX permissions
ld.bfd: warning: fw_dynamic.elf has a LOAD segment with RWX permissions
ld.bfd: warning: fw_jump.elf has a LOAD segment with RWX permissions
ld.bfd: warning: fw_payload.elf has a LOAD segment with RWX permissions

This option was added in below commit -
commit: eeab92f2423e ("Makefile: Convert to a more standard format")

Removing -N option allows to have text and rodata into one LOAD
segment and other sections into separate LOAD segment which prevents
RWX permissions on single LOAD segment. Here X == E

Current
 LOAD           0x0000000000000120 0x0000000080000000 0x0000000080000000
                 0x000000000001d4d0 0x0000000000032ed8  RWE    0x10

-N removed
  LOAD           0x0000000000001000 0x0000000080000000 0x0000000080000000
                 0x00000000000198cc 0x00000000000198cc  R E    0x1000
  LOAD           0x000000000001b000 0x000000008001a000 0x000000008001a000
                 0x00000000000034d0 0x0000000000018ed8  RW     0x1000

Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Samuel Holland <samuel@sholland.org>

treewide: Replace TRUE/FALSE with true/false

C language standard uses true/false for the boolean type.
Let's switch to that for better language compatibility.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>

include: Bump-up version to 1.2

This patch updates OpenSBI version to 1.2 as part of
release preparation.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>

docs: pmu: Update the pmu doc with removal of mcountinhbit restriction

Since commit b28f070, it is possible for platforms to run perf monitoring
even if mcountinhibit is not supported. Sampling still won't be possible
though as it requires sscofpmf extension.

Update the docs to remove the restriction.

Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

docs: pmu: update a reference to a deprecated property name

event-to-mhpmevent was deprecated and replaced by
riscv,event-to-mhpmevent, but a reference remains to the old name.
Replace it with the new one.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

docs: pmu: fix binding example

The first PMU binding example does not terminate properties with a ;,
which is invalid. Noticed while converting the binding to yaml.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/timer: mtimer: add T-Head C9xx CLINT compatible

As we already added the quirk for lacking mtime register to MTIMER
driver, add T-Head C9xx CLINT compatible to it and wire the quirk.

Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/timer: mtimer: add a quirk for lacking mtime register

T-Head developers surely have a different understanding of time CSR and
CLINT's mtime register with SiFive ones, that they did not implement
the mtime register at all -- as shown in openC906 source code, their
time CSR value is just exposed at the top of their processor IP block
and expects an external continous counter, which makes it not
overrideable, and thus mtime register is not implemented, even not for
reading. However, if CLINTEE is not enabled in T-Head's MXSTATUS
extended CSR, these systems still rely on the mtimecmp registers to
generate timer interrupts. This makes it necessary to implement T-Head
C9xx CLINT support in OpenSBI MTIMER driver, which skips implementing
reading mtime register and falls back to default code that reads time
CSR.

Add a quirk into MTIMER driver, which represents a mtime register is
lacking and time CSR value should be used instead.

Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/ipi: mswi: add T-Head C9xx CLINT compatible

Althoug the MTIMER part of a C9xx CLINT differs from a SiFive one, the
MSWI part is compliant.

Add T-Head C9xx CLINT compatible string to fdt_ipi_mswi code, sharing
the same codepath with SiFive CLINT.

Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/irqchip: plic: Ensure no out-of-bound access in context save/restore helpers

Currently the context save/restore helpers writes/reads the provided
array using an index whose maximum value is determined by PLIC, which
potentially may disagree with the caller to these helpers.

Add a parameter to ask the caller to provide the size limit of the
array to ensure no out-of-bound access happens.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/irqchip: plic: Fix the off-by-one error in context save/restore helpers

plic->num_src holds the number of interrupt sources without interrupt
source 0 but the interrupt enable register includes a bit for the
interrupt source 0 in the first word.

Fixes: 415ecf28f7ad ("lib: irqchip/plic: Add context save/restore helpers")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>

lib: utils/irqchip: plic: Fix the off-by-one error in plic_context_init()

The number of interrupt enable register in words was once correct,
but was wrongly changed to have an off-by-one error since
commit 8c362e7d065e ("lib: irqchip/plic: Factor out a context init function").

Fixes: 8c362e7d065e ("lib: irqchip/plic: Factor out a context init function")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>

lib: utils/irqchip: plic: Ensure no out-of-bound access in priority save/restore helpers

Currently the priority save/restore helpers writes/reads the provided
array using an index whose maximum value is determined by PLIC, which
potentially may disagree with the caller to these helpers.

Add a parameter to ask the caller to provide the size limit of the
array to ensure no out-of-bound access happens.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/irqchip: plic: Fix the off-by-one error in priority save/restore helpers

Interrupt source 0 is reserved. Hence the irq should start from 1.

Fixes: 2b79b694a805 ("lib: irqchip/plic: Add priority save/restore helpers")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>

docs: platform: Add documentation for Renesas RZ/Five SoC

This patch adds documentation to build Renesas RZ/Five (R9A07G043F) SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: generic: Add Renesas RZ/Five initial support

This commit provides basic support for the Renesas RZ/Five
(R9A07G043F) SoC.

The RZ/Five microprocessor includes a single RISC-V CPU Core (Andes AX45MP)
1.0 GHz, 16-bit DDR3L/DDR4 interface. Supported interfaces include:
- Gigabit Ethernet 2ch
- CAN interface (CAN-FD) 2ch
- USB 2.0 interface 2ch
- SD interface 2ch
- AD converter 2ch

Useful links:
-------------
Links: https://www.renesas.com/us/en/products/microcontrollers-microprocessors/rz-mpus/rzfive-risc-v-general-purpose-microprocessors-risc-v-cpu-core-andes-ax45mp-single-10-ghz-2ch-gigabit-ethernet
Links: http://www.andestech.com/en/products-solutions/andescore-processors/riscv-ax45mp/

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/irqchip: Add compatible string for Andestech NCEPLIC100

Add compatible string for Andestech NCEPLIC100 found on Renesas RZ/Five SoC
which is equipped with AX45MP AndesCore.

While at it drop the comma after the sentinel as it does not make sense to
have a comma after a sentinel, as any new elements must be added before the
sentinel.

dts example (Single-core AX45MP):

    soc: soc {
          ....
          plic: interrupt-controller@12c00000 {
              compatible = "renesas,r9a07g043-plic", "andestech,nceplic100";
              #interrupt-cells = <2>;
              #address-cells = <0>;
              riscv,ndev = <511>;
              interrupt-controller;
              reg = <0x0 0x12c00000 0 0x400000>;
              clocks = <&cpg CPG_MOD R9A07G043_NCEPLIC_ACLK>;
              power-domains = <&cpg>;
              resets = <&cpg R9A07G043_NCEPLIC_ARESETN>;
              interrupts-extended = <&cpu0_intc 11 &cpu0_intc 9>;
          };
          ....
    };

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>

lib: utils: serial: Add FDT driver for Renesas SCIF

Add FDT driver for Renesas SCIF.

    dts example:

    soc: soc {
          ....
            scif0: serial@1004b800 {
                    compatible = "renesas,scif-r9a07g043",
                                 "renesas,scif-r9a07g044";
                    reg = <0 0x1004b800 0 0x400>;
                    interrupts = <412 IRQ_TYPE_LEVEL_HIGH>,
                                 <414 IRQ_TYPE_LEVEL_HIGH>,
                                 <415 IRQ_TYPE_LEVEL_HIGH>,
                                 <413 IRQ_TYPE_LEVEL_HIGH>,
                                 <416 IRQ_TYPE_LEVEL_HIGH>,
                                 <416 IRQ_TYPE_LEVEL_HIGH>;
                    interrupt-names = "eri", "rxi", "txi",
                                      "bri", "dri", "tei";
                    clocks = <&cpg CPG_MOD R9A07G043_SCIF0_CLK_PCK>;
                    clock-names = "fck";
                    power-domains = <&cpg>;
                    resets = <&cpg R9A07G043_SCIF0_RST_SYSTEM_N>;
                    status = "disabled";
            };
          ....
    };

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils: serial: Add Renesas SCIF driver

Add Renesas SCIF driver.

Based on a patch in the BSP by Takeki Hamada
<takeki.hamada.ak@bp.renesas.com>
Link: https://github.com/renesas-rz/rz_opensbi/commits/work/OpenSBI-PMA
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

scripts: use env to invoke bash

Not all systems have bash at a fixed location like /bin/bash.
FreeBSD, for example, would typically have it at /usr/local/bin/bash.
When building OpenSBI on freebsd system, the build breaks.

Its advisable to use: #!/usr/bin/env bash

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi: Synchronize PMP settings with virtual memory system

As per section 3.7.2 of RISC-V Privileged Specification,
PMP settings must be synchronized with the virtual memory
system after PMP settings have been written.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: fix irqchip_plic_update_hartid_table

After determining cpu_offset we have to check this value.

Addresses-Coverity-ID: 1529706 ("Logically dead code")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: fix __fdt_parse_region()

If fdt_getprop() returns NULL, this indicates an error. In this case lenp
is set to an error code. But even if lenp = 0 we should not continue.

If fdt_getprop() returns a wider value than we expect this is a separate
error condition.

In both cases the device-tree is invalid.

Addresses-Coverity-ID: 1529703 ("Dereference after null check")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: fix is_region_valid()

For 'reg->order == __riscv_xlen' the term 'BIT(reg->order)' is undefined.

Addresses-Coverity-ID: 1529706 ("Bad bit shift operation")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: generic: Make use of fdt_match_node()

It makes sense to use fdt_match_node() instead of fdt_find_match()
in fw_platform_lookup_special() as we already have the start offset
to search from.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>