media: dibusb-common: Don't use dynamic static allocation

commit 1d7fa359d4c0fbb2756fa01cc47212908d90b7b0 upstream.

Dynamic static allocation is evil, as Kernel stack is too low, and
compilation complains about it on some archs:
drivers/media/usb/dvb-usb/dibusb-common.c:124:1: warning: 'dibusb_i2c_msg' uses dynamic stack allocation [enabled by default]
Instead, let's enforce a limit for the buffer to be the max size of
a control URB payload data (64 bytes).

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: dw2102: Don't use dynamic static allocation

commit 0065a79a8698a953e4b201c5fce8db8940530578 upstream.

Dynamic static allocation is evil, as Kernel stack is too low, and
compilation complains about it on some archs:
drivers/media/usb/dvb-usb/dw2102.c:368:1: warning: 'dw2102_earda_i2c_transfer' uses dynamic stack allocation [enabled by default]
drivers/media/usb/dvb-usb/dw2102.c:449:1: warning: 'dw2104_i2c_transfer' uses dynamic stack allocation [enabled by default]
drivers/media/usb/dvb-usb/dw2102.c:512:1: warning: 'dw3101_i2c_transfer' uses dynamic stack allocation [enabled by default]
drivers/media/usb/dvb-usb/dw2102.c:621:1: warning: 's6x0_i2c_transfer' uses dynamic stack allocation [enabled by default]
Instead, let's enforce a limit for the buffer to be the max size of
a control URB payload data (64 bytes).

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: af9015: Don't use dynamic static allocation

commit 65e2f1cb3fe0f0630834b9517ba8f631936f325c upstream.

Dynamic static allocation is evil, as Kernel stack is too low, and
compilation complains about it on some archs:
drivers/media/usb/dvb-usb-v2/af9015.c:433:1: warning: 'af9015_eeprom_hash' uses dynamic stack allocation [enabled by default]
In this specific case, it is a gcc bug, as the size is a const, but
it is easy to just change it from const to a #define, getting rid of
the gcc warning.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: af9035: Don't use dynamic static allocation

commit 7760e148350bf6df95662bc0db3734e9d991cb03 upstream.

Dynamic static allocation is evil, as Kernel stack is too low, and
compilation complains about it on some archs:
drivers/media/usb/dvb-usb-v2/af9035.c:142:1: warning: 'af9035_wr_regs' uses dynamic stack allocation [enabled by default]
drivers/media/usb/dvb-usb-v2/af9035.c:305:1: warning: 'af9035_i2c_master_xfer' uses dynamic stack allocation [enabled by default]
Instead, let's enforce a limit for the buffer to be the max size of
a control URB payload data (64 bytes).

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: mxl111sf: Don't use dynamic static allocation

commit c98300a0e8cf160aaea60bc05d2cd156a7666173 upstream.

Dynamic static allocation is evil, as Kernel stack is too low, and
compilation complains about it on some archs:
drivers/media/usb/dvb-usb-v2/mxl111sf.c:74:1: warning: 'mxl111sf_ctrl_msg' uses dynamic stack allocation [enabled by default]
Instead, let's enforce a limit for the buffer to be the max size of
a control URB payload data (64 bytes).

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon/vm: don't attempt to update ptes if ib allocation fails

commit 4cc948b94a222c310ae089c36718aac7a03aec90 upstream.

If we fail to allocate an indirect buffer (ib) when updating
the ptes, return an error instead of trying to use the ib.
Avoids a null pointer dereference.

Bug:
https://bugzilla.kernel.org/show_bug.cgi?id=58621

v2 (chk): rebased on drm-fixes-3.12 for stable inclusion

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: pl061: move irqdomain initialization

commit 2ba3154d9cb13697b97723cce75633b48adfe826 upstream.

The PL061 driver had the irqdomain initialization in an unfortunate
place: when used with device tree (and thus passing the base IRQ
0) the driver would work, as this registers an irqdomain and waits
for mappings to be done dynamically as the devices request their
IRQs, whereas when booting using platform data the irqdomain core
would attempt to allocate IRQ descriptors dynamically (which works
fine) but also to associate the irq_domain_associate_many() on all
IRQs, which in turn will call the mapping function which at this
point will try to set the type of the IRQ and then tries to acquire
a non-initialized spinlock yielding a backtrace like this:

CPU: 0 PID: 1 Comm: swapper Not tainted 3.13.0-rc1+ #652
Backtrace:
[<c0016f0c>] (dump_backtrace) from [<c00172ac>] (show_stack+0x18/0x1c)
 r6:c798ace0 r5:00000000 r4:c78257e0 r3:00200140
[<c0017294>] (show_stack) from [<c0329ea0>] (dump_stack+0x20/0x28)
[<c0329e80>] (dump_stack) from [<c004fa80>] (__lock_acquire+0x1c0/0x1b80)
[<c004f8c0>] (__lock_acquire) from [<c0051970>] (lock_acquire+0x6c/0x80)
 r10:00000000 r9:c0455234 r8:00000060 r7:c047d798 r6:600000d3 r5:00000000
 r4:c782c000
[<c0051904>] (lock_acquire) from [<c032e484>] (_raw_spin_lock_irqsave+0x60/0x74)
 r6:c01a1100 r5:800000d3 r4:c798acd0
[<c032e424>] (_raw_spin_lock_irqsave) from [<c01a1100>] (pl061_irq_type+0x28/0x)
 r6:00000000 r5:00000000 r4:c798acd0
[<c01a10d8>] (pl061_irq_type) from [<c0059ef4>] (__irq_set_trigger+0x70/0x104)
 r6:00000000 r5:c01a10d8 r4:c046da1c r3:c01a10d8
[<c0059e84>] (__irq_set_trigger) from [<c005b348>] (irq_set_irq_type+0x40/0x60)
 r10:c043240c r8:00000060 r7:00000000 r6:c046da1c r5:00000060 r4:00000000
[<c005b308>] (irq_set_irq_type) from [<c01a1208>] (pl061_irq_map+0x40/0x54)
 r6:c79693c0 r5:c798acd0 r4:00000060
[<c01a11c8>] (pl061_irq_map) from [<c005d27c>] (irq_domain_associate+0xc0/0x190)
 r5:00000060 r4:c046da1c
[<c005d1bc>] (irq_domain_associate) from [<c005d604>] (irq_domain_associate_man)
 r8:00000008 r7:00000000 r6:c79693c0 r5:00000060 r4:00000000
[<c005d5d0>] (irq_domain_associate_many) from [<c005d864>] (irq_domain_add_simp)
 r8:c046578c r7:c035b72c r6:c79693c0 r5:00000060 r4:00000008 r3:00000008
[<c005d814>] (irq_domain_add_simple) from [<c01a1380>] (pl061_probe+0xc4/0x22c)
 r6:00000060 r5:c0464380 r4:c798acd0
[<c01a12bc>] (pl061_probe) from [<c01c0450>] (amba_probe+0x74/0xe0)
 r10:c043240c r9:c0455234 r8:00000000 r7:c047d7f8 r6:c047d744 r5:00000000
 r4:c0464380

This moves the irqdomain initialization to a point where the spinlock
and GPIO chip are both fully propulated, so the callbacks can be used
without crashes.

I had some problem reproducing the crash, as the devm_kzalloc():ed
zeroed memory would seemingly mask the spinlock as something OK,
but by poisoning the lock like this:

u32 *dum;
dum = (u32 *) &chip->lock;
*dum = 0xaaaaaaaaU;

I could reproduce, fix and test the patch.

Reported-by: Russell King <linux@arm.linux.org.uk>
Cc: Rob Herring <robherring2@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: lg: fix ReportDescriptor for Logitech Formula Vibration

commit 7f50547059bd55ac6a98c29fd1989421bdc36ec9 upstream.

By default the Logitech Formula Vibration presents a combined accel/brake
axis ('Y'). This patch modifies the HID descriptor to present seperate
accel/brake axes ('Y' and 'Z').

Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID:hid-lg4ff: Switch autocentering off when strength is set to zero.

commit d2c02da549b468bbb28e67d269bd3c9e10683ff5 upstream.

When the autocenter is set to zero, this patch issues a command to
totally disable the autocenter - this results in less resistance
in the wheel.

Reported-by: Elias Vanderstuyft <elias.vds@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID:hid-lg4ff: Scale autocentering force properly on Logitech wheel

commit f8c231569a7a455dfa1907294a46ba52b3aa8859 upstream.

Adjust the scaling and lineartity to match that of the Windows
driver (from MOMO testing).

Reported-by: Elias Vanderstuyft <elias.vds@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: multicouh: add PID VID to support 1 new Wistron optical touch device

commit bf9d121efc18c30caa2caad85358cf9408eca117 upstream.

This patch adds PID VID to support for the Wistron Inc. Optical touch panel.

Signed-off-by: KaiChung Cheng <kenny_cheng@wistron.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: hid-sensor-hub: fix report size

commit d4b1bba76171cb783e32441b28462fe841073ed8 upstream.

Most of the hid sensor field size is reported in report_size field
in the report descriptor. For rotation fusion sensor the quaternion
data is 16 byte field, the report size was set to 4 and report
count field is set to 4. So the total size is 16 bytes. But the current
driver has a bug and not taking account for report count field. This
causes user space to see only 4 bytes of data sent via IIO interface.
The number of bytes in a field needs to take account of report_count
field. Need to multiply report_size and report_count to get total
number of bytes.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: hid-multitouch: add support for SiS panels

commit a6802e008e19845fd9669511b895f7515ef9c48b upstream.

Add support for SiS multitouch panels.

Signed-off-by: Forest Bond <forest.bond@rapidrollout.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: logitech - lg2ff: Add IDs for Formula Vibration Feedback Wheel

commit bd04363d3990c0727b7512a79a08c68436878bb0 upstream.

Add USB IDs for Logitech Formula Vibration Feedback Wheel (046d:ca04).

The lg2ff force feedback subdriver is used for vibration and
HID_GD_MULTIAXIS is set to avoid deadzone like other Logitech wheels.

Kconfig description etc are also updated accordingly.

Signed-off-by: Elias Vanderstuyft <Elias.vds@gmail.com>
[anssi.hannula@iki.fi: added description and CCs]
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: multitouch: Fix GeneralTouch products and add more PIDs

commit 7b2262920db2b98fe2cd32cde52141f02fd9eecf upstream.

GeneralTouch products should use the quirk SLOT_IS_CONTACTID
instead of SLOT_IS_CONTACTNUMBER.

Adding PIDs 0101,e100,0102,0106,010a from the new products.

Tested on new and older products by GeneralTouch engineers.

Signed-off-by: Luosong <android@generaltouch.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

GFS2: Fix ref count bug relating to atomic_open

commit ea0341e071527d5cec350917b01ab901af09d758 upstream.

In the case that atomic_open calls finish_no_open() with
the dentry that was supplied to gfs2_atomic_open() an
extra reference count is required. This patch fixes that
issue preventing a bug trap triggering at umount time.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sh: ecovec: fixup compile error on sdhi

commit 357002b9c09e5332c9fcd4fa3d3c0fa00ca6ae4f upstream.

afa2c9407f8908 ("sh: ecovec24: Use MMC/SDHI CD and RO GPIO") added
.tmio_flags = TMIO_MMC_USE_GPIO_CD on sh_mobile_sdhi_info, but it needs
<linux/mfd/tmio.h> header.  This patch adds it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: highbank-cpufreq: Enable Midway/ECX-2000

commit fbbc5bfb44a22e7a8ef753a1c8dfb448d7ac8b85 upstream.

Calxeda's new ECX-2000 part uses the same cpufreq interface as highbank,
so add it to the driver's compatibility list.

This is a minor change that can safely be applied to the 3.10 and 3.11
stable trees.

Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: rtsx: Modify rts5249_optimize_phy

commit 26b818511c6562ce372566c219a2ef1afea35fe6 upstream.

In some platforms, specially Thinkpad series, rts5249 won't be
initialized properly. So we need adjust some phy parameters to
improve the compatibility issue.

It is a little different between simulation and real chip. We have
no idea about which configuration is better before tape-out. We set
default settings according to simulation, but need to tune these
parameters after getting the real chip.

I can't explain every change in detail here. The below information is
just a rough description:

PHY_REG_REV: Disable internal clkreq_tx, enable rx_pwst
PHY_BPCR: No change, just turn the magic number to macro definitions
PHY_PCR: Change OOBS sensitivity, from 60mV to 90mV
PHY_RCR2: Control charge-pump current automatically
PHY_FLD4: Use TX cmu reference clock
PHY_RDR: Change RXDSEL from 30nF to 1.9nF
PHY_RCR1: Change the duration between adp_st and asserting cp_en from
0.32 us to 0.64us
PHY_FLD3: Adjust internal timers
PHY_TUNE: Fine tune the regulator12 output voltage

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: lpc_ich: Add Device IDs for Intel Wildcat Point-LP PCH

commit 5e90169c5a02da69a1ef721bea7a823e9e48fcb6 upstream.

This patch adds the TCO Watchdog Device IDs for the
Intel Wildcat Point-LP PCH.

Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: usbtouchscreen: ignore eGalax/D-Wav/EETI HIDs

commit ae2aa3a512fa5f50f67feba9e66bc2efb394bd63 upstream.

The HID driver now handles these devices, regardless of what protocol
the device claims it supports.

Signed-off-by: Forest Bond <forest.bond@rapidrollout.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: don't ignore eGalax/D-Wav/EETI HIDs

commit 95d50b6c5e18ff7351c5f2a6ff53afaed5f7e664 upstream.

Certain devices with class HID, protocol None did not work with the HID
driver at one point, and as a result were bound to usbtouchscreen
instead as of commit 139ebe8 ("Input: usbtouchscreen - fix eGalax HID
ignoring").  This change was prompted by the following report:

https://lkml.org/lkml/2009/1/25/127

Unfortunately, the device mentioned in this report is no longer
available for testing.

We've recently discovered that some devices with class HID, protocol
None do not work with usbtouchscreen, but do work with usbhid.  Here is
the report that made this evident:

http://comments.gmane.org/gmane.linux.kernel.input/31710

Driver binding for these devices has flip-flopped a few times, so both
of the above reports were regressions.

This situation would appear to leave us with no easy way to bind every
device to the right driver.  However, in my own testing with several
devices I have not found a device with class HID that does not work with
the current HID driver.  It is my belief that changes to the HID driver
since the original report have likely fixed the issue(s) that made it
unsuitable at the time, and that we should prefer it over usbtouchscreen
for these devices.  In particular, HID quirks affecting these devices
were added/removed in the following commits since then:

fe6065d HID: add multi-input quirk for eGalax Touchcontroller
77933c3 Merge branch 'egalax' into for-linus
ebd11fe HID: Add quirk for eGalax touch controler.
d34c4aa HID: add no-get quirk for eGalax touch controller

This patch makes the HID driver no longer ignore eGalax/D-Wav/EETI
devices with class HID.  If there are in fact devices with class HID
that still do not work with the HID driver, we will see another round of
regressions.  In that case I propose we investigate why the device is
not working with the HID driver rather than re-introduce regressions for
functioning HID devices by again binding them to usbtouchscreen.

The corresponding change to usbtouchscreen will be made separately.

Signed-off-by: Forest Bond <forest.bond@rapidrollout.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: i8042 - add PNP modaliases

commit 78551277e4df57864b0b0e7f85c23ede2be2edb8 upstream.

This allows the module to be autoloaded in the common case.

In order to work on non-PnP systems the module should be compiled in or
loaded unconditionally at boot (c.f. modules-load.d(5)), as before.

Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: cypress_ps2 - do not consider data bad if palm is detected

commit 5df682b297f6b23ec35615ed7bb50cbb25d25869 upstream.

If hardware (or firmware) detects palm on the surface of the device it does
not mean that the data packet is bad from the protocol standpoint. Instead
of reporting PSMOUSE_BAD_DATA in this case simply threat it as if nothing
touches the surface.

BugLink: http://bugs.launchpad.net/bugs/1229361
Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Tested-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: evdev - fall back to vmalloc for client event buffer

commit 92eb77d0ffbaa71b501a0a8dabf09a351bf4267f upstream.

evdev always tries to allocate the event buffer for clients using
kzalloc rather than vmalloc, presumably to avoid mapping overhead where
possible.  However, drivers like bcm5974, which claims support for
reporting 16 fingers simultaneously, can have an extraordinarily large
buffer.  The resultant contiguous order-4 allocation attempt fails due
to fragmentation, and the device is thus unusable until reboot.

Try kzalloc if we can to avoid the mapping overhead, but if that fails,
fall back to vzalloc.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "Input: ALPS - add support for model found on Dell XT2"

commit 936816161978ca716a56c5e553c68f25972b1e3a upstream.

This reverts commit 5beea882e64121dfe3b33145767d3302afa784d5 as it
breaks trackpoint operation on XT2.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Allow events to have NULL strings

commit 4e58e54754dc1fec21c3a9e824bc108b05fdf46e upstream.

If an TRACE_EVENT() uses __assign_str() or __get_str on a NULL pointer
then the following oops will happen:

BUG: unable to handle kernel NULL pointer dereference at   (null)
IP: [<c127a17b>] strlen+0x10/0x1a
*pde = 00000000 ^M
Oops: 0000 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.13.0-rc1-test+ #2
Hardware name:                  /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006^M
task: f5cde9f0 ti: f5e5e000 task.ti: f5e5e000
EIP: 0060:[<c127a17b>] EFLAGS: 00210046 CPU: 1
EIP is at strlen+0x10/0x1a
EAX: 00000000 EBX: c2472da8 ECX: ffffffff EDX: c2472da8
ESI: c1c5e5fc EDI: 00000000 EBP: f5e5fe84 ESP: f5e5fe80
 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
CR0: 8005003b CR2: 00000000 CR3: 01f32000 CR4: 000007d0
Stack:
 f5f18b90 f5e5feb8 c10687a8 0759004f 00000005 00000005 00000005 00200046
 00000002 00000000 c1082a93 f56c7e28 c2472da8 c1082a93 f5e5fee4 c106bc61^M
 00000000 c1082a93 00000000 00000000 00000001 00200046 00200082 00000000
Call Trace:
 [<c10687a8>] ftrace_raw_event_lock+0x39/0xc0
 [<c1082a93>] ? ktime_get+0x29/0x69
 [<c1082a93>] ? ktime_get+0x29/0x69
 [<c106bc61>] lock_release+0x57/0x1a5
 [<c1082a93>] ? ktime_get+0x29/0x69
 [<c10824dd>] read_seqcount_begin.constprop.7+0x4d/0x75
 [<c1082a93>] ? ktime_get+0x29/0x69^M
 [<c1082a93>] ktime_get+0x29/0x69
 [<c108a46a>] __tick_nohz_idle_enter+0x1e/0x426
 [<c10690e8>] ? lock_release_holdtime.part.19+0x48/0x4d
 [<c10bc184>] ? time_hardirqs_off+0xe/0x28
 [<c1068c82>] ? trace_hardirqs_off_caller+0x3f/0xaf
 [<c108a8cb>] tick_nohz_idle_enter+0x59/0x62
 [<c1079242>] cpu_startup_entry+0x64/0x192
 [<c102299c>] start_secondary+0x277/0x27c
Code: 90 89 c6 89 d0 88 c4 ac 38 e0 74 09 84 c0 75 f7 be 01 00 00 00 89 f0 48 5e 5d c3 55 89 e5 57 66 66 66 66 90 83 c9 ff 89 c7 31 c0 <f2> ae f7 d1 8d 41 ff 5f 5d c3 55 89 e5 57 66 66 66 66 90 31 ff
EIP: [<c127a17b>] strlen+0x10/0x1a SS:ESP 0068:f5e5fe80
CR2: 0000000000000000
---[ end trace 01bc47bf519ec1b2 ]---

New tracepoints have been added that have allowed for NULL pointers
being assigned to strings. To fix this, change the TRACE_EVENT() code
to check for NULL and if it is, it will assign "(null)" to it instead
(similar to what glibc printf does).

Reported-by: Shuah Khan <shuah.kh@samsung.com>
Reported-by: Jovi Zhangwei <jovi.zhangwei@gmail.com>
Link: http://lkml.kernel.org/r/CAGdX0WFeEuy+DtpsJzyzn0343qEEjLX97+o1VREFkUEhndC+5Q@mail.gmail.com
Link: http://lkml.kernel.org/r/528D6972.9010702@samsung.com
Fixes: 9cbf117662e2 ("tracing/events: provide string with undefined size support")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Check leaf nodes to find aamix amps

commit 2ded3e5b61d61d0bc90bebb8004db6184c7db6eb upstream.

The current generic parser assumes blindly that the volume and mute
amps are found in the aamix node itself.  But on some codecs,
typically Analog Devices ones, the aamix amps are separately
implemented in each leaf node of the aamix node, and the current
driver can't establish the correct amp controls.  This is a regression
compared with the previous static quirks.

This patch extends the search for the amps to the leaf nodes for
allowing the aamix controls again on such codecs.
In this implementation, I didn't code to loop through the whole paths,
since usually one depth should suffice, and we can't search too
deeply, as it may result in the conflicting control assignments.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=65641
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Initialize missing bass speaker pin for ASUS AIO ET2700

commit 1f0bbf03cb829162ec8e6d03c98aaaed88c6f534 upstream.

Add a fixup entry for the missing bass speaker pin 0x16 on ASUS ET2700
AiO desktop.  The channel map will be added in the next patch, so that
this can be backported easily to stable kernels.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=65961
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Create Headhpone Mic Jack Mode when really needed

commit ced4cefc75fdb8be95eaee325ad0f6b2fc0a484b upstream.

When a headphone jack is configurable as input, the generic parser
tries to make it retaskable as Headphone Mic.  The switching can be
done smoothly if Capture Source control exists (i.e. there is another
input source).  Or when user explicitly enables the creation of jack
mode controls, "Headhpone Mic Jack Mode" will be created accordingly.

However, if the headphone mic is the only input source, we have to
create "Headphone Mic Jack Mode" control because there is no capture
source selection.  Otherwise, the generic parser assumes that the
input is constantly enabled, thus the headphone is permanently set
as input.  This situation happens on the old MacBook Airs where no
input is supported properly, for example.

This patch fixes the problem: now "Headphone Mic Jack Mode" is created
when such an input selection isn't possible.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=65681
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Fix hp-mic mode without VREF bits

commit 16c0cefe8951b2c4b824fd06011ac1b359b1ab3b upstream.

When the hp mic pin has no VREF bits, the driver forgot to set PIN_IN
bit.  Spotted during debugging old MacBook Airs.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=65681
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Add support of ALC231 codec

commit ba4c4d0a9021ab034554d532a98133d668b87599 upstream.

It's compatible with ALC269.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Set pcbeep amp for ALC668

commit 9ad54547cf6f4410eba83bb95dfd2a0966718d6d upstream.

Set the missing pcbeep default amp for ALC668.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpuset: Fix memory allocator deadlock

commit 0fc0287c9ed1ffd3706f8b4d9b314aa102ef1245 upstream.

Juri hit the below lockdep report:

[    4.303391] ======================================================
[    4.303392] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ]
[    4.303394] 3.12.0-dl-peterz+ #144 Not tainted
[    4.303395] ------------------------------------------------------
[    4.303397] kworker/u4:3/689 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[    4.303399]  (&p->mems_allowed_seq){+.+...}, at: [<ffffffff8114e63c>] new_slab+0x6c/0x290
[    4.303417]
[    4.303417] and this task is already holding:
[    4.303418]  (&(&q->__queue_lock)->rlock){..-...}, at: [<ffffffff812d2dfb>] blk_execute_rq_nowait+0x5b/0x100
[    4.303431] which would create a new lock dependency:
[    4.303432]  (&(&q->__queue_lock)->rlock){..-...} -> (&p->mems_allowed_seq){+.+...}
[    4.303436]

[    4.303898] the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock:
[    4.303918] -> (&p->mems_allowed_seq){+.+...} ops: 2762 {
[    4.303922]    HARDIRQ-ON-W at:
[    4.303923]                     [<ffffffff8108ab9a>] __lock_acquire+0x65a/0x1ff0
[    4.303926]                     [<ffffffff8108cbe3>] lock_acquire+0x93/0x140
[    4.303929]                     [<ffffffff81063dd6>] kthreadd+0x86/0x180
[    4.303931]                     [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0
[    4.303933]    SOFTIRQ-ON-W at:
[    4.303933]                     [<ffffffff8108abcc>] __lock_acquire+0x68c/0x1ff0
[    4.303935]                     [<ffffffff8108cbe3>] lock_acquire+0x93/0x140
[    4.303940]                     [<ffffffff81063dd6>] kthreadd+0x86/0x180
[    4.303955]                     [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0
[    4.303959]    INITIAL USE at:
[    4.303960]                    [<ffffffff8108a884>] __lock_acquire+0x344/0x1ff0
[    4.303963]                    [<ffffffff8108cbe3>] lock_acquire+0x93/0x140
[    4.303966]                    [<ffffffff81063dd6>] kthreadd+0x86/0x180
[    4.303969]                    [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0
[    4.303972]  }

Which reports that we take mems_allowed_seq with interrupts enabled. A
little digging found that this can only be from
cpuset_change_task_nodemask().

This is an actual deadlock because an interrupt doing an allocation will
hit get_mems_allowed()->...->__read_seqcount_begin(), which will spin
forever waiting for the write side to complete.

Cc: John Stultz <john.stultz@linaro.org>
Cc: Mel Gorman <mgorman@suse.de>
Reported-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Juri Lelli <juri.lelli@gmail.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: fix cgroup_subsys_state leak for seq_files

commit e605b36575e896edd8161534550c9ea021b03bc0 upstream.

If a cgroup file implements either read_map() or read_seq_string(),
such file is served using seq_file by overriding file->f_op to
cgroup_seqfile_operations, which also overrides the release method to
single_release() from cgroup_file_release().

Because cgroup_file_open() didn't use to acquire any resources, this
used to be fine, but since f7d58818ba42 ("cgroup: pin
cgroup_subsys_state when opening a cgroupfs file"), cgroup_file_open()
pins the css (cgroup_subsys_state) which is put by
cgroup_file_release().  The patch forgot to update the release path
for seq_files and each open/release cycle leaks a css reference.

Fix it by updating cgroup_file_release() to also handle seq_files and
using it for seq_file release path too.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: use a dedicated workqueue for cgroup destruction

commit e5fca243abae1445afbfceebda5f08462ef869d3 upstream.

Since be44562613851 ("cgroup: remove synchronize_rcu() from
cgroup_diput()"), cgroup destruction path makes use of workqueue.  css
freeing is performed from a work item from that point on and a later
commit, ea15f8ccdb430 ("cgroup: split cgroup destruction into two
steps"), moves css offlining to workqueue too.

As cgroup destruction isn't depended upon for memory reclaim, the
destruction work items were put on the system_wq; unfortunately, some
controller may block in the destruction path for considerable duration
while holding cgroup_mutex.  As large part of destruction path is
synchronized through cgroup_mutex, when combined with high rate of
cgroup removals, this has potential to fill up system_wq's max_active
of 256.

Also, it turns out that memcg's css destruction path ends up queueing
and waiting for work items on system_wq through work_on_cpu().  If
such operation happens while system_wq is fully occupied by cgroup
destruction work items, work_on_cpu() can't make forward progress
because system_wq is full and other destruction work items on
system_wq can't make forward progress because the work item waiting
for work_on_cpu() is holding cgroup_mutex, leading to deadlock.

This can be fixed by queueing destruction work items on a separate
workqueue.  This patch creates a dedicated workqueue -
cgroup_destroy_wq - for this purpose.  As these work items shouldn't
have inter-dependencies and mostly serialized by cgroup_mutex anyway,
giving high concurrency level doesn't buy anything and the workqueue's
@max_active is set to 1 so that destruction work items are executed
one by one on each CPU.

Hugh Dickins: Because cgroup_init() is run before init_workqueues(),
cgroup_destroy_wq can't be allocated from cgroup_init().  Do it from a
separate core_initcall().  In the future, we probably want to reorder
so that workqueue init happens before cgroup_init().

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Hugh Dickins <hughd@google.com>
Reported-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Link: http://lkml.kernel.org/r/20131111220626.GA7509@sbohrermbp13-local.rgmadvisors.com
Link: http://lkml.kernel.org/g/alpine.LNX.2.00.1310301606080.2333@eggly.anvils
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

workqueue: fix ordered workqueues in NUMA setups

commit 8a2b75384444488fc4f2cbb9f0921b6a0794838f upstream.

An ordered workqueue implements execution ordering by using single
pool_workqueue with max_active == 1.  On a given pool_workqueue, work
items are processed in FIFO order and limiting max_active to 1
enforces the queued work items to be processed one by one.

Unfortunately, 4c16bd327c ("workqueue: implement NUMA affinity for
unbound workqueues") accidentally broke this guarantee by applying
NUMA affinity to ordered workqueues too.  On NUMA setups, an ordered
workqueue would end up with separate pool_workqueues for different
nodes.  Each pool_workqueue still limits max_active to 1 but multiple
work items may be executed concurrently and out of order depending on
which node they are queued to.

Fix it by using dedicated ordered_wq_attrs[] when creating ordered
workqueues.  The new attrs match the unbound ones except that no_numa
is always set thus forcing all NUMA nodes to share the default
pool_workqueue.

While at it, add sanity check in workqueue creation path which
verifies that an ordered workqueues has only the default
pool_workqueue.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Libin <huawei.libin@huawei.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/uaccess: add missing page table walk range check

commit 71a86ef055f569b93bc6901f007bdf447dbf515f upstream.

When translating a user space address, the address must be checked against
the ASCE limit of the process. If the address is larger than the maximum
address that is reachable with the ASCE, an ASCE type exception must be
generated.

The current code simply ignored the higher order bits. This resulted in an
address wrap around in user space instead of an exception in user space.

Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Move PTE_PROT_NONE higher up

commit 3676f9ef5481d614f8c5c857f5319755be248268 upstream.

PTE_PROT_NONE means that a pte is present but does not have any
read/write attributes. However, setting the memory type like
pgprot_writecombine() is allowed and such bits overlap with
PTE_PROT_NONE. This causes mmap/munmap issues in drivers that change the
vma->vm_pg_prot on PROT_NONE mappings.

This patch reverts the PTE_FILE/PTE_PROT_NONE shift in commit
59911ca4325d (ARM64: mm: Move PTE_PROT_NONE bit) and moves PTE_PROT_NONE
together with the other software bits.

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:accel:kxsd9 fix missing mutex unlock

commit 0ee005c7dc2803125275e24598f0fb37775a6af3 upstream.

This will leave a lock held after reading from the device, preventing
any further reads.

Signed-off-by: Frank Zago <frank@zago.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/signals: Improved mark VSX not saved with small contexts fix

commit ec67ad82814bee92251fd963bf01c7a173856555 upstream.

In a recent patch:
  commit c13f20ac48328b05cd3b8c19e31ed6c132b44b42
  Author: Michael Neuling <mikey@neuling.org>
  powerpc/signals: Mark VSX not saved with small contexts

We fixed an issue but an improved solution was later discussed after the patch
was merged.

Firstly, this patch doesn't handle the 64bit signals case, which could also hit
this issue (but has never been reported).

Secondly, the original patch isn't clear what MSR VSX should be set to.  The
new approach below always clears the MSR VSX bit (to indicate no VSX is in the
context) and sets it only in the specific case where VSX is available (ie. when
VSX has been used and the signal context passed has space to provide the
state).

This reverts the original patch and replaces it with the improved solution.  It
also adds a 64 bit version.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: uhid: fix leak for 64/32 UHID_CREATE

commit 80897aa787ecd58eabb29deab7cbec9249c9b7e6 upstream.

UHID allows short writes so user-space can omit unused fields. We
automatically set them to 0 in the kernel. However, the 64/32 bit
compat-handler didn't do that in the UHID_CREATE fallback. This will
reveal random kernel heap data (of random size, even) to user-space.

Fixes: befde0226a59 ('HID: uhid: make creating devices work on 64/32 systems')

Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: test mddev->flags more safely in md_check_recovery.

commit 142d44c310819e1965ca70b4d55d7679f5797e25 upstream.

commit 7a0a5355cbc71efa md: Don't test all of mddev->flags at once.
made most tests on mddev->flags safer, but missed one.

When
commit 260fa034ef7a4ff8b7306 md: avoid deadlock when dirty buffers during md_stop.
added MD_STILL_CLOSED, this caused md_check_recovery to misbehave.
It can think there is something to do but find nothing.  This can
lead to the md thread spinning during array shutdown.

https://bugzilla.kernel.org/show_bug.cgi?id=65721

Reported-and-tested-by: Richard W.M. Jones <rjones@redhat.com>
Fixes: 260fa034ef7a4ff8b7306
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/raid5: Before freeing old multi-thread worker, it should flush them.

commit d206dcfa9809ec3409483e93b5e362f801fa0c27 upstream.

When changing group_thread_cnt from sysfs entry, the kernel can oops.

The kernel messages are:
[  740.961389] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[  740.961444] IP: [<ffffffff81062570>] process_one_work+0x30/0x500
[  740.961476] PGD b9013067 PUD b651e067 PMD 0
[  740.961503] Oops: 0000 [#1] SMP
[  740.961525] Modules linked in: netconsole e1000e ptp pps_core
[  740.961577] CPU: 0 PID: 3683 Comm: kworker/u8:5 Not tainted 3.12.0+ #23
[  740.961602] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080015  11/09/2011
[  740.961646] task: ffff88013abe0000 ti: ffff88013a246000 task.ti: ffff88013a246000
[  740.961673] RIP: 0010:[<ffffffff81062570>]  [<ffffffff81062570>] process_one_work+0x30/0x500
[  740.961708] RSP: 0018:ffff88013a247e08  EFLAGS: 00010086
[  740.961730] RAX: ffff8800b912b400 RBX: ffff88013a61e680 RCX: ffff8800b912b400
[  740.961757] RDX: ffff8800b912b600 RSI: ffff8800b912b600 RDI: ffff88013a61e680
[  740.961782] RBP: ffff88013a247e48 R08: ffff88013a246000 R09: 000000000002c09d
[  740.961808] R10: 000000000000010f R11: 0000000000000000 R12: ffff88013b00cc00
[  740.961833] R13: 0000000000000000 R14: ffff88013b00cf80 R15: ffff88013a61e6b0
[  740.961861] FS:  0000000000000000(0000) GS:ffff88013fc00000(0000) knlGS:0000000000000000
[  740.961893] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  740.962001] CR2: 00000000000000b8 CR3: 00000000b24fe000 CR4: 00000000000407f0
[  740.962001] Stack:
[  740.962001]  0000000000000008 ffff8800b912b600 ffff88013b00cc00 ffff88013a61e680
[  740.962001]  ffff88013b00cc00 ffff88013b00cc18 ffff88013b00cf80 ffff88013a61e6b0
[  740.962001]  ffff88013a247eb8 ffffffff810639c6 0000000000012a80 ffff88013a247fd8
[  740.962001] Call Trace:
[  740.962001]  [<ffffffff810639c6>] worker_thread+0x206/0x3f0
[  740.962001]  [<ffffffff810637c0>] ? manage_workers+0x2c0/0x2c0
[  740.962001]  [<ffffffff81069656>] kthread+0xc6/0xd0
[  740.962001]  [<ffffffff81069590>] ? kthread_freezable_should_stop+0x70/0x70
[  740.962001]  [<ffffffff81722ffc>] ret_from_fork+0x7c/0xb0
[  740.962001]  [<ffffffff81069590>] ? kthread_freezable_should_stop+0x70/0x70
[  740.962001] Code: 89 e5 41 57 41 56 41 55 45 31 ed 41 54 53 48 89 fb 48 83 ec 18 48 8b 06 4c 8b 67 48 48 89 c1 30 c9 a8 04 4c 0f 45 e9 80 7f 58 00 <49> 8b 45 08 44 8b b0 00 01 00 00 78 0c 41 f6 44 24 10 04 0f 84
[  740.962001] RIP  [<ffffffff81062570>] process_one_work+0x30/0x500
[  740.962001]  RSP <ffff88013a247e08>
[  740.962001] CR2: 0000000000000008
[  740.962001] ---[ end trace 39181460000748de ]---
[  740.962001] Kernel panic - not syncing: Fatal exception

This can happen if there are some stripes left, fewer than MAX_STRIPE_BATCH.
A worker is queued to handle them.
But before calling raid5_do_work, raid5d handles those
stripes making conf->active_stripe = 0.
So mddev_suspend() can return.
We might then free old worker resources before the queued
raid5_do_work() handled them.  When it runs, it crashes.

raid5d() raid5_store_group_thread_cnt()
queue_work mddev_suspend()
handle_strips
active_stripe=0
free(old worker resources)
process_one_work
raid5_do_work

To avoid this, we should only flush the worker resources before freeing them.

This fixes a bug introduced in 3.12 so is suitable for the 3.12.x
stable series.

Fixes: b721420e8719131896b009b11edbbd27
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Shaohua Li <shli@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: fix calculation of stacking limits on level change.

commit 02e5f5c0a0f726e66e3d8506ea1691e344277969 upstream.

The various ->run routines of md personalities assume that the 'queue'
has been initialised by the blk_set_stacking_limits() call in
md_alloc().

However when the level is changed (by level_store()) the ->run routine
for the new level is called for an array which has already had the
stacking limits modified.  This can result in incorrect final
settings.

So call blk_set_stacking_limits() before ->run in level_store().

A specific consequence of this bug is that it causes
discard_granularity to be set incorrectly when reshaping a RAID4 to a
RAID0.

This is suitable for any -stable kernel since 3.3 in which
blk_set_stacking_limits() was introduced.

Reported-and-tested-by: "Baldysiak, Pawel" <pawel.baldysiak@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

raid5: Use slow_path to release stripe when mddev->thread is null

commit ad4068de49862b083ac2a15bc50689bb30ce3e44 upstream.

When release_stripe() is called in grow_one_stripe(), the
mddev->thread is null. So it will omit one wakeup this thread to
release stripe.
For this condition, use slow_path to release stripe.

Bug was introduced in 3.12

Fixes: 773ca82fa1ee58dd1bf88b
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

setfacl removes part of ACL when setting POSIX ACLs to Samba

commit b1d93356427be6f050dc55c86eb019d173700af6 upstream.

setfacl over cifs mounts can remove the default ACL when setting the
(non-default part of) the ACL and vice versa (we were leaving at 0
rather than setting to -1 the count field for the unaffected
half of the ACL.  For example notice the setfacl removed
the default ACL in this sequence:

steven@steven-GA-970A-DS3:~/cifs-2.6$ getfacl /mnt/test-dir ; setfacl
-m default:user:test:rwx,user:test:rwx /mnt/test-dir
getfacl: Removing leading '/' from absolute path names
user::rwx
group::r-x
other::r-x
default:user::rwx
default:user:test:rwx
default:group::r-x
default:mask::rwx
default:other::r-x

steven@steven-GA-970A-DS3:~/cifs-2.6$ getfacl /mnt/test-dir
getfacl: Removing leading '/' from absolute path names
user::rwx
user:test:rwx
group::r-x
mask::rwx
other::r-x

Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Jeremy Allison <jra@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: wiimote: fix inverted pro-controller axes

commit 0abda6fa81dced031e3df31ac29bfb253549c2d1 upstream.

The analog-stick vertical axes are inverted. Fix that! Otherwise, games
and other gamepad applications need to carry their own fixups (which they
thankfully haven't done, yet).

Reported-by: Rafael Brune <mail@rbrune.de>
Tested-by: Rafael Brune <mail@rbrune.de>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

edac, highbank: Fix interrupt setup of mem and l2 controller

commit a72b8859fd3941cc1d2940d5c43026d2c6fb959e upstream.

Register and enable interrupts after the edac registration. Otherwise
incomming ecc error interrupts lead to crashes during device setup.

Fixing this in drivers for mc and l2.

Signed-off-by: Robert Richter <robert.richter@linaro.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Robert Richter <rric@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ib_isert: Avoid duplicate iscsit_increment_maxcmdsn call

commit 04d9cd1224e5bc9d6146bab2866cdc81deb9b509 upstream.

This patch avoids a duplicate iscsit_increment_maxcmdsn() call for
ISER_IB_RDMA_WRITE within isert_map_rdma() + isert_reg_rdma_frwr(),
which will already be occuring once during isert_put_datain() ->
iscsit_build_rsp_pdu() operation.

It also removes the local conn->stat_sn assignment + increment,
and changes the third parameter to iscsit_build_rsp_pdu() to
signal this should be done by iscsi_target_mode code.

Tested-by: Moussa Ba <moussaba@micron.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

radeon: workaround pinning failure on low ram gpu

commit 97b6ff6be9da7675aab339334fda996d6c5077d9 upstream.

GPU with low amount of ram can fails at pinning new framebuffer before
unpinning old one. On such failure, retry with unpinning old one before
pinning new one allowing to work around the issue. This is somewhat
ugly but only affect those old GPU we care about.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: adjust TN dpm parameters for stability (v2)

commit 958b84fb3bef193198538b5c5902fa687cc8363f upstream.

Adjust some of the TN dpm settings for stability.  Enabling
these features causes hangs and other stability problems
on certain boards.

v2: leave uvd dpm enabled

Bug:
https://bugzilla.kernel.org/show_bug.cgi?id=63101

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: hook up backlight functions for CI and KV family.

commit 7272c9d2286525d4c6bce788243cf2b6f306d15c upstream.

Fixes crashes when handling atif events due to the lack of a
callback being registered.

Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

radeon/i2c: do not count reg index in number of i2c byte we are writing.

commit fae009d15a44e5f1d938340facf4b8bc7dc69a09 upstream.

Useless to count the register index in number of bytes we are writing.

Fixes a regression with hw i2c enabled.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: don't share PPLLs on DCE4.1

commit 70471860ff9f335c60c004d42ebd48945bfa5403 upstream.

Sharing PPLLs seems to cause problems on some boards.

Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=45334

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: fix UVD destroy IB size

commit 727ddc84a1373bf06b2fa261f44e38fb0faf5340 upstream.

The parameter is in bytes not dwords.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: activate UVD clocks before sending the destroy msg

commit c154a76311293f9671439286834aa325b7ef59fe upstream.

Make sure the UVD clocks are still active before sending
the destroy message, otherwise the hw might hang.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon/si: fix define for MC_SEQ_TRAIN_WAKEUP_CNTL

commit d5693761b2b4ff530c8af8af9ec55b6eae76e617 upstream.

Typo in the register offset.

Noticed-by: Sylvain BERTRAND <sylware@legeek.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau: when bailing out of a pushbuf ioctl, do not remove previous fence

commit 9360bd1112d8874d21942e2ae74f5416b00a8db6 upstream.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Replicate BIOS eDP bpp clamping hack for hsw

commit 1021442098ee9328fdd4d113d63a3a7f2f40c37b upstream.

Haswell's DDI encoders have their own ->get_config callback and in

commit c6cd2ee2d59111a07cd9199564c9bdcb2d11e5cf
Author: Jani Nikula <jani.nikula@intel.com>
Date:   Mon Oct 21 10:52:07 2013 +0300

    drm/i915/dp: workaround BIOS eDP bpp clamping issue

we've forgotten to replicate this hack. So let's do it that.

Note for backporters: The above commit and all it's depencies need to
be backported first.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71049
Tested-by: Gökçen Eraslan <gokcen.eraslan@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: restore the early forcewake cleanup

commit ef46e0d247da0a7a408573aa15870e231bbd4af2 upstream.

Some BIOS just leak the forcewak bits, which we clean up.
Unfortunately this has been broken in

commit 521198a2e7095c8c7daa8d7d3a76a110c346be6f
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date:   Fri Aug 23 16:52:30 2013 +0300

    drm/i915: sanitize forcewake registers on reset

To make this work both for resets and for BIOS takeover just add the
forcewake clearing call back to intel_uncore_early_sanitize.

We need to clear the forcewake in early sanitize so that the forcewak
dance in intel_uncore_init (to figure out whether we have mt or legacy
forcewake on ivb) works. That cleanup fits in nicely with the general
topic of early_sanitize to prepare for the very first mmio ops.

Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Jörg Otte <jrg.otte@gmail.com>
Cc: Jörg Otte <jrg.otte@gmail.com>
References: https://lkml.org/lkml/2013/11/16/40
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: flush cursors harder

commit b2ea8ef559b4d94190009f3651b5b3ab7c05afd3 upstream.

Apparently they need the same treatment as primary planes. This fixes
modesetting failures because of stuck cursors (!) on Thomas' i830M
machine.

I've figured while at it I'll also roll it out for the ivb 3 pipe
version of this function. I didn't do this for i845/i865 since Bspec
says the update mechanism works differently, and there's some
additional rules about what can be updated in which order.

Tested-by: Thomas Richter <thor@math.tu-berlin.de>
Cc: Thomas Richter <thor@math.tu-berlin.de>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/dvo: call ->mode_set callback only when the port is running

commit 48f34e10169dbb3dd7a19af64e328492b7f54af4 upstream.

The ns2501 controller seems to need the dpll and dvo port to accept
the timing update commands. Quick testing on my x30 here seems to
indicate that other dvo controllers don't mind. So let's move the
->mode_set callback to a place where we have the port up and running
already.

Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Thomas Richter <thor@math.tu-berlin.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ttm: Fix ttm_bo_move_memcpy

commit da95c788ef0c645378ffccb7060a0df1a33aee38 upstream.

All error paths will want to keep the mm node, so handle this at the
function exit. This fixes an ioremap failure error path.
Also add some comments to make the function a bit easier to understand.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ttm: Handle in-memory region copies

commit 9a0599ddeae012a771bba5e23393fc52d8a59d89 upstream.

Fix the case where the ttm pointer may be NULL causing
a NULL pointer dereference.

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Thomas Hellström <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ttm: Fix memory type compatibility check

commit 59c8e66378fb78adbcd05f0d09783dde6fef282b upstream.

Also check the busy placements before deciding to move a buffer object.
Failing to do this may result in a completely unneccessary move within a
single memory type.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Resource evict fixes

commit ea029c28deadc33d2af4baf26810dd5fc44d4926 upstream.

Fix an error message that was incorrectly blaming device resource id
shortage.

Also make sure we correctly catch resource eviction errors, that
could otherwise lead to evictable resources temporarily not being on the
LRU list.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ftrace: Fix function graph with loading of modules

commit 8a56d7761d2d041ae5e8215d20b4167d8aa93f51 upstream.

Commit 8c4f3c3fa9681 "ftrace: Check module functions being traced on reload"
fixed module loading and unloading with respect to function tracing, but
it missed the function graph tracer. If you perform the following

 # cd /sys/kernel/debug/tracing
 # echo function_graph > current_tracer
 # modprobe nfsd
 # echo nop > current_tracer

You'll get the following oops message:

 ------------[ cut here ]------------
 WARNING: CPU: 2 PID: 2910 at /linux.git/kernel/trace/ftrace.c:1640 __ftrace_hash_rec_update.part.35+0x168/0x1b9()
 Modules linked in: nfsd exportfs nfs_acl lockd ipt_MASQUERADE sunrpc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables uinput snd_hda_codec_idt
 CPU: 2 PID: 2910 Comm: bash Not tainted 3.13.0-rc1-test #7
 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
  0000000000000668 ffff8800787efcf8 ffffffff814fe193 ffff88007d500000
  0000000000000000 ffff8800787efd38 ffffffff8103b80a 0000000000000668
  ffffffff810b2b9a ffffffff81a48370 0000000000000001 ffff880037aea000
 Call Trace:
  [<ffffffff814fe193>] dump_stack+0x4f/0x7c
  [<ffffffff8103b80a>] warn_slowpath_common+0x81/0x9b
  [<ffffffff810b2b9a>] ? __ftrace_hash_rec_update.part.35+0x168/0x1b9
  [<ffffffff8103b83e>] warn_slowpath_null+0x1a/0x1c
  [<ffffffff810b2b9a>] __ftrace_hash_rec_update.part.35+0x168/0x1b9
  [<ffffffff81502f89>] ? __mutex_lock_slowpath+0x364/0x364
  [<ffffffff810b2cc2>] ftrace_shutdown+0xd7/0x12b
  [<ffffffff810b47f0>] unregister_ftrace_graph+0x49/0x78
  [<ffffffff810c4b30>] graph_trace_reset+0xe/0x10
  [<ffffffff810bf393>] tracing_set_tracer+0xa7/0x26a
  [<ffffffff810bf5e1>] tracing_set_trace_write+0x8b/0xbd
  [<ffffffff810c501c>] ? ftrace_return_to_handler+0xb2/0xde
  [<ffffffff811240a8>] ? __sb_end_write+0x5e/0x5e
  [<ffffffff81122aed>] vfs_write+0xab/0xf6
  [<ffffffff8150a185>] ftrace_graph_caller+0x85/0x85
  [<ffffffff81122dbd>] SyS_write+0x59/0x82
  [<ffffffff8150a185>] ftrace_graph_caller+0x85/0x85
  [<ffffffff8150a2d2>] system_call_fastpath+0x16/0x1b
 ---[ end trace 940358030751eafb ]---

The above mentioned commit didn't go far enough. Well, it covered the
function tracer by adding checks in __register_ftrace_function(). The
problem is that the function graph tracer circumvents that (for a slight
efficiency gain when function graph trace is running with a function
tracer. The gain was not worth this).

The problem came with ftrace_startup() which should always be called after
__register_ftrace_function(), if you want this bug to be completely fixed.

Anyway, this solution moves __register_ftrace_function() inside of
ftrace_startup() and removes the need to call them both.

Reported-by: Dave Wysochanski <dwysocha@redhat.com>
Fixes: ed926f9b35cd ("ftrace: Use counters to enable functions to trace")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sony-laptop: do not scribble keyboard backlight registers on resume

commit b975dc3689fc6a3718ad288ce080924f9cb7e176 upstream.

Follow-up to commit 294d31e8227c ("sony-laptop: don't change keyboard
backlight settings"): avoid messing up the state on resume.  Leave it to
what was before suspending as it's anyway likely that we still don't
know what value we should write to the EC registers.  This fix is also
required in 3.12

Tested-by: Karol Babioch <karol@babioch.de>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: pfuze100: allow misprogrammed ID

commit 88baf7148e899db7e0b676e4363647f50e48eaed upstream.

prior to week 08 of 2013 Freescale misprogrammed between 1 and 3% of
PFUZE1000 parts with a ID=0x8 instead of the expected ID=0x0

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

prism54: set netdev type to "wlan"

commit 8e3ffa471091c560deb6738ed9ab7445b7a5fd04 upstream.

Userspace uses the netdev devtype for stuff like device naming and type
detection.  Be nice and set it.  Remove the pointless #if/#endif around
SET_NETDEV_DEV too.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

n_tty: Ensure reader restarts worker for next reader

commit 42458f41d08f0873299e830464c1232a6839297d upstream.

A departing reader must restart a flush_to_ldisc() worker _before_
the next reader enters the read loop; this is to avoid the new reader
concluding no more i/o is available and prematurely exiting, when the
old reader simply hasn't re-started the worker yet.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Reset hupped state on open

commit d4855e1fc03c2bb32dd64badf51cec5a2a26ab2a upstream.

A common security idiom is to hangup the current tty (via vhangup())
after forking but before execing a root shell. This hangs up any
existing opens which other processes may have and ensures subsequent
opens have the necessary permissions to open the root shell tty/pty.

Reset the TTY_HUPPED state after the driver has successfully
returned the opened tty (perform the reset while the tty is locked
to avoid racing with concurrent hangups).

Reported-by: Heorhi Valakhanovich <valahanovich@tut.by>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Tested-by: Heorhi Valakhanovich <valahanovich@tut.by>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

n_tty: Fix echo overrun tail computation

commit 6f2225363c205e186c1465c2c7c84f17c1635504 upstream.

Commit cbfd0340ae1993378fd47179db949e050e16e697,
'n_tty: Process echoes in blocks', introduced an error when
consuming the echo buffer tail to prevent buffer overrun, where
the incorrect operation code byte is checked to determine how
far to advance the tail to the next echo byte.

Check the correct byte for the echo operation code byte.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: incorrect test of echo_buf() result for ECHO_OP_START

commit c476f6584b0011741b4f0316f1ac4aa3a99403e1 upstream.

test echo_buf() result for ECHO_OP_START

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

n_tty: Fix 4096-byte canonical reads

commit c77569d2f3ef7844ee4ac7005a57da6898b302a8 upstream.

Although the maximum allowable canonical line is specified to
be 255 bytes (MAX_CANON), the practical limit has actually been
the size of the line discipline read buffer (N_TTY_BUF_SIZE == 4096).

Commit 32f13521ca68bc624ff6effc77f308a52b038bf0,
n_tty: Line copy to user buffer in canonical mode, limited the
line copy to 4095 bytes. With a completely full line discipline
read buffer and a userspace buffer > 4095, _no_ data was copied,
and the read() syscall returned 0, indicating EOF.

Fix the interval arithmetic to compute the correct number of bytes
to copy to userspace in the range [1..4096].

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

avr32: fix out-of-range jump in large kernels

commit d617b338bbfdd77e9cbd8e7dc949cee3dd73d575 upstream.

This patch fixes following error (for big kernels):

---8<---
arch/avr32/boot/u-boot/head.o: In function `no_tag_table':
(.init.text+0x44): relocation truncated to fit: R_AVR32_22H_PCREL against symbol `panic' defined in .text.unlikely section in kernel/built-in.o
arch/avr32/kernel/built-in.o: In function `bad_return':
(.ex.text+0x236): relocation truncated to fit: R_AVR32_22H_PCREL against symbol `panic' defined in .text.unlikely section in kernel/built-in.o
--->8---

It comes up when the kernel increases and 'panic()' is too far away to fit in
the +/- 2MiB range. Which in turn issues from the 21-bit displacement in
'br{cond4}' mnemonic which is one of the two ways to do jumps (rjmp has just
10-bit displacement and therefore a way smaller range). This fact was stated
before in 8d29b7b9f81d6b83d869ff054e6c189d6da73f1f.
One solution to solve this is to add a local storage for the symbol address
and just load the $pc with that value.

Signed-off-by: Andreas Bießmann <andreas@biessmann.de>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

avr32: setup crt for early panic()

commit 7a2a74f4b856993218aa7cdeeb6c3103101340db upstream.

Before the CRT was (fully) set up in kernel_entry (bss cleared before in
_start, but also not before jump to panic() in no_tag_table case).

This patch fixes this up to have a fully working CRT when branching to panic()
in no_tag_table.

Signed-off-by: Andreas Bießmann <andreas@biessmann.de>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: correct locking in selinux_netlbl_socket_connect)

commit 42d64e1add3a1ce8a787116036163b8724362145 upstream.

The SELinux/NetLabel glue code has a locking bug that affects systems
with NetLabel enabled, see the kernel error message below.  This patch
corrects this problem by converting the bottom half socket lock to a
more conventional, and correct for this call-path, lock_sock() call.

 ===============================
 [ INFO: suspicious RCU usage. ]
 3.11.0-rc3+ #19 Not tainted
 -------------------------------
 net/ipv4/cipso_ipv4.c:1928 suspicious rcu_dereference_protected() usage!

 other info that might help us debug this:

 rcu_scheduler_active = 1, debug_locks = 0
 2 locks held by ping/731:
  #0:  (slock-AF_INET/1){+.-...}, at: [...] selinux_netlbl_socket_connect
  #1:  (rcu_read_lock){.+.+..}, at: [<...>] netlbl_conn_setattr

 stack backtrace:
 CPU: 1 PID: 731 Comm: ping Not tainted 3.11.0-rc3+ #19
 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
  0000000000000001 ffff88006f659d28 ffffffff81726b6a ffff88003732c500
  ffff88006f659d58 ffffffff810e4457 ffff88006b845a00 0000000000000000
  000000000000000c ffff880075aa2f50 ffff88006f659d90 ffffffff8169bec7
 Call Trace:
  [<ffffffff81726b6a>] dump_stack+0x54/0x74
  [<ffffffff810e4457>] lockdep_rcu_suspicious+0xe7/0x120
  [<ffffffff8169bec7>] cipso_v4_sock_setattr+0x187/0x1a0
  [<ffffffff8170f317>] netlbl_conn_setattr+0x187/0x190
  [<ffffffff8170f195>] ? netlbl_conn_setattr+0x5/0x190
  [<ffffffff8131ac9e>] selinux_netlbl_socket_connect+0xae/0xc0
  [<ffffffff81303025>] selinux_socket_connect+0x135/0x170
  [<ffffffff8119d127>] ? might_fault+0x57/0xb0
  [<ffffffff812fb146>] security_socket_connect+0x16/0x20
  [<ffffffff815d3ad3>] SYSC_connect+0x73/0x130
  [<ffffffff81739a85>] ? sysret_check+0x22/0x5d
  [<ffffffff810e5e2d>] ? trace_hardirqs_on_caller+0xfd/0x1c0
  [<ffffffff81373d4e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
  [<ffffffff815d52be>] SyS_connect+0xe/0x10
  [<ffffffff81739a59>] system_call_fastpath+0x16/0x1b

Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / hotplug: Fix conflicted PCI bridge notify handlers

commit ca499fc87ed945094d952da0eb7eea7dbeb1feec upstream.

The PCI host bridge scan handler installs its own notify handler,
handle_hotplug_event_root(), by itself.  Nevertheless, the ACPI
hotplug framework also installs the common notify handler,
acpi_hotplug_notify_cb(), for PCI root bridges.  This causes
acpi_hotplug_notify_cb() to call _OST method with unsupported
error as hotplug.enabled is not set.

To address this issue, introduce hotplug.ignore flag, which
indicates that the scan handler installs its own notify handler by
itself.  The ACPI hotplug framework does not install the common
notify handler when this flag is set.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
[rjw: Changed the name of the new flag]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Remove duplicate pci_disable_device() from pcie_portdrv_remove()

commit e7cc5cf74544d97d7b69e2701595037474db1f96 upstream.

The pcie_portdrv .probe() method calls pci_enable_device() once, in
pcie_port_device_register(), but the .remove() method calls
pci_disable_device() twice, in pcie_port_device_remove() and in
pcie_portdrv_remove().

That causes a "disabling already-disabled device" warning when removing a
PCIe port device.  This happens all the time when removing Thunderbolt
devices, but is also easy to reproduce with, e.g.,
"echo 0000:00:1c.3 > /sys/bus/pci/drivers/pcieport/unbind"

This patch removes the disable from pcie_portdrv_remove().

[bhelgaas: changelog, tag for stable]
Reported-by: David Bulkow <David.Bulkow@stratus.com>
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: log the audit_names record type

commit d3aea84a4ace5ff9ce7fb7714cee07bebef681c2 upstream.

...to make it clear what the intent behind each record's operation was.

In many cases you can infer this, based on the context of the syscall
and the result. In other cases it's not so obvious. For instance, in
the case where you have a file being renamed over another, you'll have
two different records with the same filename but different inode info.
By logging this information we can clearly tell which one was created
and which was deleted.

This fixes what was broken in commit bfcec708.
Commit 79f6530c should also be backported to stable v3.7+.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: add child record before the create to handle case where create fails

commit 14e972b4517128ac8e30e3de2ee4fbd995084223 upstream.

Historically, when a syscall that creates a dentry fails, you get an audit
record that looks something like this (when trying to create a file named
"new" in "/tmp/tmp.SxiLnCcv63"):

    type=PATH msg=audit(1366128956.279:965): item=0 name="/tmp/tmp.SxiLnCcv63/new" inode=2138308 dev=fd:02 mode=040700 ouid=0 ogid=0 rdev=00:00 obj=staff_u:object_r:user_tmp_t:s15:c0.c1023

This record makes no sense since it's associating the inode information for
"/tmp/tmp.SxiLnCcv63" with the path "/tmp/tmp.SxiLnCcv63/new". The recent
patch I posted to fix the audit_inode call in do_last fixes this, by making it
look more like this:

    type=PATH msg=audit(1366128765.989:13875): item=0 name="/tmp/tmp.DJ1O8V3e4f/" inode=141 dev=fd:02 mode=040700 ouid=0 ogid=0 rdev=00:00 obj=staff_u:object_r:user_tmp_t:s15:c0.c1023

While this is more correct, if the creation of the file fails, then we
have no record of the filename that the user tried to create.

This patch adds a call to audit_inode_child to may_create. This creates
an AUDIT_TYPE_CHILD_CREATE record that will sit in place until the
create succeeds. When and if the create does succeed, then this record
will be updated with the correct inode info from the create.

This fixes what was broken in commit bfcec708.
Commit 79f6530c should also be backported to stable v3.7+.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: fix info leak in AUDIT_GET requests

commit 64fbff9ae0a0a843365d922e0057fc785f23f0e3 upstream.

We leak 4 bytes of kernel stack in response to an AUDIT_GET request as
we miss to initialize the mask member of status_set. Fix that.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: use nlmsg_len() to get message payload length

commit 4d8fe7376a12bf4524783dd95cbc00f1fece6232 upstream.

Using the nlmsg_len member of the netlink header to test if the message
is valid is wrong as it includes the size of the netlink header itself.
Thereby allowing to send short netlink messages that pass those checks.

Use nlmsg_len() instead to test for the right message length. The result
of nlmsg_len() is guaranteed to be non-negative as the netlink message
already passed the checks of nlmsg_ok().

Also switch to min_t() to please checkpatch.pl.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: printk USER_AVC messages when audit isn't enabled

commit 0868a5e150bc4c47e7a003367cd755811eb41e0b upstream.

When the audit=1 kernel parameter is absent and auditd is not running,
AUDIT_USER_AVC messages are being silently discarded.

AUDIT_USER_AVC messages should be sent to userspace using printk(), as
mentioned in the commit message of 4a4cd633 ("AUDIT: Optimise the
audit-disabled case for discarding user messages").

When audit_enabled is 0, audit_receive_msg() discards all user messages
except for AUDIT_USER_AVC messages. However, audit_log_common_recv_msg()
refuses to allocate an audit_buffer if audit_enabled is 0. The fix is to
special case AUDIT_USER_AVC messages in both functions.

It looks like commit 50397bd1 ("[AUDIT] clean up audit_receive_msg()")
introduced this bug.

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: linux-audit@redhat.com
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mwifiex: fix wrong eth_hdr usage for bridged packets in AP mode

commit 8d93f1f309d38b65fce0b9f0de91ba6c96990c07 upstream.

The eth_hdr is never defined in this driver but it gets compiled
without any warning/error because kernel has defined eth_hdr.

Fix it by defining our own p_ethhdr and use it instead of eth_hdr.

Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mwifiex: correct packet length for packets from SDIO interface

commit d03b4aa77e1187b77dfe37d14a923547f00baa66 upstream.

While receiving a packet on SDIO interface, we allocate skb with
size multiple of SDIO block size. We need to resize this skb
after RX using packet length from RX header.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CIFS: Fix symbolic links usage

commit eb85d94bdd91fb4dbea4ee465d4349cbea4eaaca upstream.

Now we treat any reparse point as a symbolic link and map it to a Unix
one that is not true in a common case due to many reparse point types
supported by SMB servers.

Distinguish reparse point types into two groups:
1) that can be accessed directly through a reparse point
(junctions, deduplicated files, NFS symlinks);
2) that need to be processed manually (Windows symbolic links, DFS);

and map only Windows symbolic links to Unix ones.

Acked-by: Jeff Layton <jlayton@redhat.com>
Reported-and-tested-by: Joao Correia <joaomiguelcorreia@gmail.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcache: Fix dirty_data accounting

commit 1fa8455deb92e9ec7756df23030e73b2d28eeca7 upstream.

Dirty data accounting wasn't quite right - firstly, we were adding the key we're
inserting after it could have merged with another dirty key already in the
btree, and secondly we could sometimes pass the wrong offset to
bcache_dev_sectors_dirty_add() for dirty data we were overwriting - which is
important when tracking dirty data by stripe.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/qxl: fix memory leak in release list handling

commit 1b28c3e628315ac0d9ef2d3fac0403f05ae692db upstream.

wow no idea how I got this far without seeing this,
leaking the entries in the list makes kmalloc-64 slab grow.

References: https://bugzilla.kernel.org/show_bug.cgi?id=65121
Reported-by: Matthew Stapleton <matthew4196@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qxl: avoid an oops in the deferred io code.

commit cc87509d87696d7cd393882f5dedea01e03e41a9 upstream.

If we are using deferred io due to plymouth or X.org fbdev driver
we will oops in memcpy due to this pointless multiply here,

removing it fixes fbdev to start and not oops.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / Hibernate: Do not crash kernel in free_basic_memory_bitmaps()

commit 6a0c7cd33075f6b7f1d80145bb19812beb3fc5c9 upstream.

I have received a report about the BUG_ON() in free_basic_memory_bitmaps()
triggering mysteriously during an aborted s2disk hibernation attempt.
The only way I can explain that is that /dev/snapshot was first
opened for writing (resume mode), then closed and then opened again
for reading and closed again without freezing tasks.  In that case
the first invocation of snapshot_open() would set the free_bitmaps
flag in snapshot_state, which is a static variable.  That flag
wouldn't be cleared later and the second invocation of snapshot_open()
would just leave it like that, so the subsequent snapshot_release()
would see data->frozen set and free_basic_memory_bitmaps() would be
called unnecessarily.

To prevent that from happening clear data->free_bitmaps in
snapshot_open() when the file is being opened for reading (hibernate
mode).

In addition to that, replace the BUG_ON() in free_basic_memory_bitmaps()
with a WARN_ON() as the kernel can continue just fine if the condition
checked by that macro occurs.

Fixes: aab172891542 (PM / hibernate: Fix user space driven resume regression)
Reported-by: Oliver Lorenz <olli@olorenz.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / runtime: Use pm_runtime_put_sync() in __device_release_driver()

commit baab52ded242c35a2290e1fa82e0cc147d0d8c1a upstream.

Commit fa180eb448fa (PM / Runtime: Idle devices asynchronously after
probe|release) modified __device_release_driver() to call
pm_runtime_put(dev) instead of pm_runtime_put_sync(dev) before
detaching the driver from the device.  However, that was a mistake,
because pm_runtime_put(dev) causes rpm_idle() to be queued up and
the driver may be gone already when that function is executed.
That breaks the assumptions the drivers have the right to make
about the core's behavior on the basis of the existing documentation
and actually causes problems to happen, so revert that part of
commit fa180eb448fa and restore the previous behavior of
__device_release_driver().

Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Fixes: fa180eb448fa (PM / Runtime: Idle devices asynchronously after probe|release)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / hibernate: Avoid overflow in hibernate_preallocate_memory()

commit fd432b9f8c7c88428a4635b9f5a9c6e174df6e36 upstream.

When system has a lot of highmem (e.g. 16GiB using a 32 bits kernel),
the code to calculate how much memory we need to preallocate in
normal zone may cause overflow. As Leon has analysed:

 It looks that during computing 'alloc' variable there is overflow:
 alloc = (3943404 - 1970542) - 1978280 = -5418 (signed)
 And this function goes to err_out.

Fix this by avoiding that overflow.

References: https://bugzilla.kernel.org/show_bug.cgi?id=60817
Reported-and-tested-by: Leon Drugi <eyak@wp.pl>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-core: Fix memory corruption if blkcg_init_queue fails

commit fff4996b7db7955414ac74386efa5e07fd766b50 upstream.

If blkcg_init_queue fails, blk_alloc_queue_node doesn't call bdi_destroy
to clean up structures allocated by the backing dev.

------------[ cut here ]------------
WARNING: at lib/debugobjects.c:260 debug_print_object+0x85/0xa0()
ODEBUG: free active (active state 0) object type: percpu_counter hint:           (null)
Modules linked in: dm_loop dm_mod ip6table_filter ip6_tables uvesafb cfbcopyarea cfbimgblt cfbfillrect fbcon font bitblit fbcon_rotate fbcon_cw fbcon_ud fbcon_ccw softcursor fb fbdev ipt_MASQUERADE iptable_nat nf_nat_ipv4 msr nf_conntrack_ipv4 nf_defrag_ipv4 xt_state ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc tun ipv6 cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand cpufreq_conservative spadfs fuse hid_generic usbhid hid raid0 md_mod dmi_sysfs nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack lm85 hwmon_vid snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd_hwdep snd_usbmidi_lib snd_rawmidi snd soundcore acpi_cpufreq freq_table mperf sata_svw serverworks kvm_amd ide_core ehci_pci ohci_hcd libata ehci_hcd kvm usbcore tg3 usb_common libphy k10temp pcspkr ptp i2c_piix4 i2c_core evdev microcode hwmon rtc_cmos pps_core e100 skge floppy mii processor button unix
CPU: 0 PID: 2739 Comm: lvchange Tainted: G        W
3.10.15-devel #14
Hardware name: empty empty/S3992-E, BIOS 'V1.06   ' 06/09/2009
 0000000000000009 ffff88023c3c1ae8 ffffffff813c8fd4 ffff88023c3c1b20
 ffffffff810399eb ffff88043d35cd58 ffffffff81651940 ffff88023c3c1bf8
 ffffffff82479d90 0000000000000005 ffff88023c3c1b80 ffffffff81039a67
Call Trace:
 [<ffffffff813c8fd4>] dump_stack+0x19/0x1b
 [<ffffffff810399eb>] warn_slowpath_common+0x6b/0xa0
 [<ffffffff81039a67>] warn_slowpath_fmt+0x47/0x50
 [<ffffffff8122aaaf>] ? debug_check_no_obj_freed+0xcf/0x250
 [<ffffffff81229a15>] debug_print_object+0x85/0xa0
 [<ffffffff8122abe3>] debug_check_no_obj_freed+0x203/0x250
 [<ffffffff8113c4ac>] kmem_cache_free+0x20c/0x3a0
 [<ffffffff811f6709>] blk_alloc_queue_node+0x2a9/0x2c0
 [<ffffffff811f672e>] blk_alloc_queue+0xe/0x10
 [<ffffffffa04c0093>] dm_create+0x1a3/0x530 [dm_mod]
 [<ffffffffa04c6bb0>] ? list_version_get_info+0xe0/0xe0 [dm_mod]
 [<ffffffffa04c6c07>] dev_create+0x57/0x2b0 [dm_mod]
 [<ffffffffa04c6bb0>] ? list_version_get_info+0xe0/0xe0 [dm_mod]
 [<ffffffffa04c6bb0>] ? list_version_get_info+0xe0/0xe0 [dm_mod]
 [<ffffffffa04c6528>] ctl_ioctl+0x268/0x500 [dm_mod]
 [<ffffffff81097662>] ? get_lock_stats+0x22/0x70
 [<ffffffffa04c67ce>] dm_ctl_ioctl+0xe/0x20 [dm_mod]
 [<ffffffff81161aad>] do_vfs_ioctl+0x2ed/0x520
 [<ffffffff8116cfc7>] ? fget_light+0x377/0x4e0
 [<ffffffff81161d2b>] SyS_ioctl+0x4b/0x90
 [<ffffffff813cff16>] system_call_fastpath+0x1a/0x1f
---[ end trace 4b5ff0d55673d986 ]---
------------[ cut here ]------------

This fix should be backported to stable kernels starting with 2.6.37. Note
that in the kernels prior to 3.5 the affected code is different, but the
bug is still there - bdi_init is called and bdi_destroy isn't.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target: Fix delayed Task Aborted Status (TAS) handling bug

commit 29f4c090079f442ea2723d292e4e64f0b6ac1f27 upstream.

This patch fixes a bug in delayed Task Aborted Status (TAS) handling,
where transport_send_task_abort() was not returning for the case
when the se_tfo->write_pending() callback indicated that last fabric
specific WRITE PDU had not yet been received.

It also adds an explicit cmd->scsi_status = SAM_STAT_TASK_ABORTED
assignment within transport_check_aborted_status() to avoid the case
where se_tfo->queue_status() is called when the SAM_STAT_TASK_ABORTED
assignment + ->queue_status() in transport_send_task_abort() does not
occur once SCF_SENT_DELAYED_TAS has been set.

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iser-target: Avoid using FRMR for single dma entry requests

commit f01b9f73392b48c6cda7c2c66594c73137c776da upstream.

This patch changes isert_reg_rdma_frwr() to not use FRMR for single
dma entry requests from small I/Os, in order to avoid the associated
memory registration overhead.

Using DMA MR is sufficient here for the single dma entry requests,
and addresses a >= v3.12 performance regression.

Signed-off-by: Vu Pham <vu@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ioatdma: fix selection of 16 vs 8 source path

commit 21e96c7313486390c694919522a76dfea0a86c59 upstream.

When performing continuations there are implied sources that need to be
added to the source count. Quoting dma_set_maxpq:

/* dma_maxpq - reduce maxpq in the face of continued operations
 * @dma - dma device with PQ capability
 * @flags - to check if DMA_PREP_CONTINUE and DMA_PREP_PQ_DISABLE_P are set
 *
 * When an engine does not support native continuation we need 3 extra
 * source slots to reuse P and Q with the following coefficients:
 * 1/ {00} * P : remove P from Q', but use it as a source for P'
 * 2/ {01} * Q : use Q to continue Q' calculation
 * 3/ {00} * Q : subtract Q from P' to cancel (2)
 *
 * In the case where P is disabled we only need 1 extra source:
 * 1/ {01} * Q : use Q to continue Q' calculation
 */

...fix the selection of the 16 source path to take these implied sources
into account.

Note this also kills the BUG_ON(src_cnt < 9) check in
__ioat3_prep_pq16_lock().  Besides not accounting for implied sources
the check is redundant given we already made the path selection.

Cc: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ioatdma: fix sed pool selection

commit 5d48b9b5d80e3aa38a5161565398b1e48a650573 upstream.

The array to lookup the sed pool based on the number of sources
(pq16_idx_to_sedi) is 16 entries and expects a max source index.
However, we pass the total source count which runs off the end of the
array when src_cnt == 16.  The minimal fix is to just pass src_cnt-1,
but given we know the source count is > 8 we can just calculate the sed
pool by (src_cnt - 2) >> 3.

Cc: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>