review.tizen.org Git - platform/kernel/linux-starfive.git/log

ceph: fail the request directly if handle_reply gets an ESTALE

If MDS return ESTALE, that means the MDS has already iterated all the
possible active MDSes including the auth MDS or the inode is under
purging. No need to retry in auth MDS and will just return ESTALE
directly. Retrying in this situation will cause an infinite loop.

Also, retrying like this would prevent the kernel VFS layer ESTALE
handling from working properly. An ESTALE error is usually an indication
that the dcache is wrong, so we want to allow the VFS to redo the lookup
and revalidate it properly.

URL: https://tracker.ceph.com/issues/53504
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Acked-by: Greg Farnum <gfarnum@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

ceph: wake waiters after failed async create

Currently, we only wake the waiters if we got a req->r_target_inode
out of the reply. In the case where the create fails though, we may not
have one.

If there is a non-zero result from the create, then ensure that we wake
anything waiting on the inode after we shut it down.

URL: https://tracker.ceph.com/issues/54067
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

ceph: wait for async create reply before sending any cap messages

If we haven't received a reply to an async create request, then we don't
want to send any cap messages to the MDS for that inode yet.

Just have ceph_check_caps and __kick_flushing_caps return without doing
anything, and have ceph_write_inode wait for the reply if we were asked
to wait on the inode writeback.

URL: https://tracker.ceph.com/issues/54107
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

ceph: eliminate req->r_wait_for_completion from ceph_mds_request

...and instead just pass the wait function on the stack.

Make ceph_mdsc_wait_request non-static, and add an argument for wait for
completion. Then have ceph_lock_message call ceph_mdsc_submit_request,
and ceph_mdsc_wait_request and pass in the pointer to
ceph_lock_wait_for_completion.

While we're in there, rearrange some fields in ceph_mds_request, so we
save a total of 24 bytes per.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

ceph: uninline the data on a file opened for writing

If a ceph file is made up of inline data, uninline that in the ceph_open()
rather than in ceph_page_mkwrite(), ceph_write_iter(), ceph_fallocate() or
ceph_write_begin().

This makes it easier to convert to using the netfs library for VM write
hooks.

Should this also take the inode lock for the duration on uninlining to
prevent a race with truncation?

[ jlayton: fix up folio locking, update i_inline_version after write ]

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

ceph: make ceph_netfs_issue_op() handle inlined data

Make ceph_netfs_issue_op() handle inlined data on page 0.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

ceph: switch netfs read ops to use rreq->inode instead of rreq->mapping->host

One fewer pointer dereference, and in the future we may not be able to
count on the mapping pointer being populated (e.g. in the DIO case).

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

Linux 5.17-rc6

Merge tag 'irq-urgent-2022-02-27' of git://git./linux/kernel/git/tip/tip

Pull irq fix from Thomas Gleixner:
"A single fix for a regression caused by the recent PCI/MSI rework
  which resulted in a recursive locking problem in the VMD driver.

  The cure is to cache the relevant information upfront instead of
  retrieving it at runtime"

* tag 'irq-urgent-2022-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  PCI: vmd: Prevent recursive locking on interrupt allocation

Merge tag 'dma-mapping-5.17-1' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping fix from Christoph Hellwig:

- fix a swiotlb info leak (Halil Pasic)

* tag 'dma-mapping-5.17-1' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: fix info leak with DMA_FROM_DEVICE

Merge tag 'pinctrl-v5-17-3' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:

- Fix some drive strength and pull-up code in the K210 driver.

- Add the Alder Lake-M ACPI ID so it starts to work properly.

- Use a static name for the StarFive GPIO irq_chip, forestalling an
   upcoming fixes series from Marc Zyngier.

- Fix an ages old bug in the Tegra 186 driver where we were indexing at
   random into struct and being lucky getting the right member.

* tag 'pinctrl-v5-17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  gpio: tegra186: Fix chip_data type confusion
  pinctrl: starfive: Use a static name for the GPIO irq_chip
  pinctrl: tigerlake: Revert "Add Alder Lake-M ACPI ID"
  pinctrl: k210: Fix bias-pull-up
  pinctrl: fix loop in k210_pinconf_get_drive()

Merge tag 'trace-v5.17-rc4' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:

- rtla (Real-Time Linux Analysis tool):
    - fix typo in man page
    - Update API -e to -E before it is released
    - Error message fix and memory leak fix

- Partially uninline trace event soft disable to shrink text

- Fix function graph start up test

- Have triggers affect the trace instance they are in and not top level

- Have osnoise sleep in the units it says it uses

- Remove unused ftrace stub function

- Remove event probe redundant info from event in the buffer

- Fix group ownership setting in tracefs

- Ensure trace buffer is minimum size to prevent crashes

* tag 'trace-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  rtla/osnoise: Fix error message when failing to enable trace instance
  rtla/osnoise: Free params at the exit
  rtla/hist: Make -E the short version of --entries
  tracing: Fix selftest config check for function graph start up test
  tracefs: Set the group ownership in apply_options() not parse_options()
  tracing/osnoise: Make osnoise_main to sleep for microseconds
  ftrace: Remove unused ftrace_startup_enable() stub
  tracing: Ensure trace buffer is at least 4096 bytes large
  tracing: Uninline trace_trigger_soft_disabled() partly
  eprobes: Remove redundant event type information
  tracing: Have traceon and traceoff trigger honor the instance
  tracing: Dump stacktrace trigger to the corresponding instance
  rtla: Fix systme -> system typo on man page

Merge tag 'fixes-2022-02-26' of git://git./linux/kernel/git/rppt/memblock

Pull memblock fix from Mike Rapoport:
"Use kfree() to release kmalloced memblock regions

  memblock.{reserved,memory}.regions may be allocated using kmalloc()
  in memblock_double_array(). Use kfree() to release these kmalloced
  regions"

* tag 'fixes-2022-02-26' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock: use kfree() to release kmalloced memblock regions

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"12 patches.

  Subsystems affected by this patch series: MAINTAINERS, mailmap, memfd,
  and mm (hugetlb, kasan, hugetlbfs, pagemap, selftests, memcg, and
  slab)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  selftests/memfd: clean up mapping in mfd_fail_write
  mailmap: update Roman Gushchin's email
  MAINTAINERS, SLAB: add Roman as reviewer, git tree
  MAINTAINERS: add Shakeel as a memcg co-maintainer
  MAINTAINERS: remove Vladimir from memcg maintainers
  MAINTAINERS: add Roman as a memcg co-maintainer
  selftest/vm: fix map_fixed_noreplace test failure
  mm: fix use-after-free bug when mm->mmap is reused after being freed
  hugetlbfs: fix a truncation issue in hugepages parameter
  kasan: test: prevent cache merging in kmem_cache_double_destroy
  mm/hugetlb: fix kernel crash with hugetlb mremap
  MAINTAINERS: add sysctl-next git tree

Merge tag 'riscv-for-linus-5.17-rc6' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

- A fix for the K210 sdcard defconfig, to avoid using a
   fixed delay for the root FS

- A fix to make sure there's a proper call frame for
   trace_hardirqs_{on,off}().

* tag 'riscv-for-linus-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: fix oops caused by irqsoff latency tracer
  riscv: fix nommu_k210_sdcard_defconfig

Merge tag 'xfs-5.17-fixes-2' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
"Nothing exciting, just more fixes for not returning sync_filesystem
  error values (and eliding it when it's not necessary).

  Summary:

   - Only call sync_filesystem when we're remounting the filesystem
     readonly readonly, and actually check its return value"

* tag 'xfs-5.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: only bother with sync_filesystem during readonly remount

selftests/memfd: clean up mapping in mfd_fail_write

Running the memfd script ./run_hugetlbfs_test.sh will often end in error
as follows:

    memfd-hugetlb: CREATE
    memfd-hugetlb: BASIC
    memfd-hugetlb: SEAL-WRITE
    memfd-hugetlb: SEAL-FUTURE-WRITE
    memfd-hugetlb: SEAL-SHRINK
    fallocate(ALLOC) failed: No space left on device
    ./run_hugetlbfs_test.sh: line 60: 166855 Aborted                 (core dumped) ./memfd_test hugetlbfs
    opening: ./mnt/memfd
    fuse: DONE

If no hugetlb pages have been preallocated, run_hugetlbfs_test.sh will
allocate 'just enough' pages to run the test.  In the SEAL-FUTURE-WRITE
test the mfd_fail_write routine maps the file, but does not unmap.  As a
result, two hugetlb pages remain reserved for the mapping.  When the
fallocate call in the SEAL-SHRINK test attempts allocate all hugetlb
pages, it is short by the two reserved pages.

Fix by making sure to unmap in mfd_fail_write.

Link: https://lkml.kernel.org/r/20220219004340.56478-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mailmap: update Roman Gushchin's email

I'm moving to a @linux.dev account. Map my old addresses.

Link: https://lkml.kernel.org/r/20220221200006.416377-1-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS, SLAB: add Roman as reviewer, git tree

The slab code has an overlap with kmem accounting, where Roman has done
a lot of work recently and it would be useful to make sure he's CC'd on
patches that potentially affect it. Thus add him as a reviewer for the
SLAB subsystem.

Also while at it, add the link to slab git tree.

Link: https://lkml.kernel.org/r/20220222103104.13241-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add Shakeel as a memcg co-maintainer

I have been contributing and reviewing to the memcg codebase for last
couple of years. So, making it official.

Link: https://lkml.kernel.org/r/20220224060148.4092228-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: remove Vladimir from memcg maintainers

Link: https://lkml.kernel.org/r/4ad1f8da49d7b71c84a0c15bd5347f5ce704e730.1645608825.git.vdavydov.dev@gmail.com
Signed-off-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add Roman as a memcg co-maintainer

Add myself as a memcg co-maintainer. My primary focus over last few
years was the kernel memory accounting stack, but I do work on some
other parts of the memory controller as well.

Link: https://lkml.kernel.org/r/20220221233951.659048-1-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftest/vm: fix map_fixed_noreplace test failure

On the latest RHEL the test fails due to executable mapped at 256MB
address

     # ./map_fixed_noreplace
    mmap() @ 0x10000000-0x10050000 p=0xffffffffffffffff result=File exists
    10000000-10010000 r-xp 00000000 fd:04 34905657                           /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace
    10010000-10020000 r--p 00000000 fd:04 34905657                           /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace
    10020000-10030000 rw-p 00010000 fd:04 34905657                           /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace
    10029b90000-10029bc0000 rw-p 00000000 00:00 0                            [heap]
    7fffbb510000-7fffbb750000 r-xp 00000000 fd:04 24534                      /usr/lib64/libc.so.6
    7fffbb750000-7fffbb760000 r--p 00230000 fd:04 24534                      /usr/lib64/libc.so.6
    7fffbb760000-7fffbb770000 rw-p 00240000 fd:04 24534                      /usr/lib64/libc.so.6
    7fffbb780000-7fffbb7a0000 r--p 00000000 00:00 0                          [vvar]
    7fffbb7a0000-7fffbb7b0000 r-xp 00000000 00:00 0                          [vdso]
    7fffbb7b0000-7fffbb800000 r-xp 00000000 fd:04 24514                      /usr/lib64/ld64.so.2
    7fffbb800000-7fffbb810000 r--p 00040000 fd:04 24514                      /usr/lib64/ld64.so.2
    7fffbb810000-7fffbb820000 rw-p 00050000 fd:04 24514                      /usr/lib64/ld64.so.2
    7fffd93f0000-7fffd9420000 rw-p 00000000 00:00 0                          [stack]
    Error: couldn't map the space we need for the test

Fix this by finding a free address using mmap instead of hardcoding
BASE_ADDRESS.

Link: https://lkml.kernel.org/r/20220217083417.373823-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Jann Horn <jannh@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix use-after-free bug when mm->mmap is reused after being freed

oom reaping (__oom_reap_task_mm) relies on a 2 way synchronization with
exit_mmap.  First it relies on the mmap_lock to exclude from unlock
path[1], page tables tear down (free_pgtables) and vma destruction.
This alone is not sufficient because mm->mmap is never reset.

For historical reasons[2] the lock is taken there is also MMF_OOM_SKIP
set for oom victims before.

The oom reaper only ever looks at oom victims so the whole scheme works
properly but process_mrelease can opearate on any task (with fatal
signals pending) which doesn't really imply oom victims.  That means
that the MMF_OOM_SKIP part of the synchronization doesn't work and it
can see a task after the whole address space has been demolished and
traverse an already released mm->mmap list.  This leads to use after
free as properly caught up by KASAN report.

Fix the issue by reseting mm->mmap so that MMF_OOM_SKIP synchronization
is not needed anymore.  The MMF_OOM_SKIP is not removed from exit_mmap
yet but it acts mostly as an optimization now.

[1] 27ae357fa82b ("mm, oom: fix concurrent munlock and oom reaper unmap, v3")
[2] 212925802454 ("mm: oom: let oom_reap_task and exit_mmap run concurrently")

[mhocko@suse.com: changelog rewrite]

Link: https://lore.kernel.org/all/00000000000072ef2c05d7f81950@google.com/
Link: https://lkml.kernel.org/r/20220215201922.1908156-1-surenb@google.com
Fixes: 64591e8605d6 ("mm: protect free_pgtables with mmap_lock write lock in exit_mmap")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: syzbot+2ccf63a4bd07cf39cab0@syzkaller.appspotmail.com
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jan Engelhardt <jengelh@inai.de>
Cc: Tim Murray <timmurray@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlbfs: fix a truncation issue in hugepages parameter

When we specify a large number for node in hugepages parameter, it may
be parsed to another number due to truncation in this statement:

node = tmp;

For example, add following parameter in command line:

hugepagesz=1G hugepages=4294967297:5

and kernel will allocate 5 hugepages for node 1 instead of ignoring it.

I move the validation check earlier to fix this issue, and slightly
simplifies the condition here.

Link: https://lkml.kernel.org/r/20220209134018.8242-1-liuyuntao10@huawei.com
Fixes: b5389086ad7be0 ("hugetlbfs: extend the definition of hugepages parameter to support node allocation")
Signed-off-by: Liu Yuntao <liuyuntao10@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: test: prevent cache merging in kmem_cache_double_destroy

With HW_TAGS KASAN and kasan.stacktrace=off, the cache created in the
kmem_cache_double_destroy() test might get merged with an existing one.
Thus, the first kmem_cache_destroy() call won't actually destroy it but
will only decrease the refcount. This causes the test to fail.

Provide an empty constructor for the created cache to prevent the cache
from getting merged.

Link: https://lkml.kernel.org/r/b597bd434c49591d8af00ee3993a42c609dc9a59.1644346040.git.andreyknvl@google.com
Fixes: f98f966cd750 ("kasan: test: add test case for double-kmem_cache_destroy()")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: fix kernel crash with hugetlb mremap

This fixes the below crash:

  kernel BUG at include/linux/mm.h:2373!
  cpu 0x5d: Vector: 700 (Program Check) at [c00000003c6e76e0]
      pc: c000000000581a54: pmd_to_page+0x54/0x80
      lr: c00000000058d184: move_hugetlb_page_tables+0x4e4/0x5b0
      sp: c00000003c6e7980
     msr: 9000000000029033
    current = 0xc00000003bd8d980
    paca    = 0xc000200fff610100   irqmask: 0x03   irq_happened: 0x01
      pid   = 9349, comm = hugepage-mremap
  kernel BUG at include/linux/mm.h:2373!
    move_hugetlb_page_tables+0x4e4/0x5b0 (link register)
    move_hugetlb_page_tables+0x22c/0x5b0 (unreliable)
    move_page_tables+0xdbc/0x1010
    move_vma+0x254/0x5f0
    sys_mremap+0x7c0/0x900
    system_call_exception+0x160/0x2c0

the kernel can't use huge_pte_offset before it set the pte entry because
a page table lookup check for huge PTE bit in the page table to
differentiate between a huge pte entry and a pointer to pte page.  A
huge_pte_alloc won't mark the page table entry huge and hence kernel
should not use huge_pte_offset after a huge_pte_alloc.

Link: https://lkml.kernel.org/r/20220211063221.99293-1-aneesh.kumar@linux.ibm.com
Fixes: 550a7d60bd5e ("mm, hugepages: add mremap() support for hugepage backed vma")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add sysctl-next git tree

Add a git tree for sysctls as there's been quite a bit of work lately to
remove all the syctls out of kernel/sysctl.c and move to their respective
places, so coordination has been needed to avoid conflicts. This tree
will also help soak these changes on linux-next prior to getting to Linus.

Link: https://lkml.kernel.org/r/20220218182736.3694508-1-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtla/osnoise: Fix error message when failing to enable trace instance

When a trace instance creation fails, tools are printing:

Could not enable -> osnoiser <- tracer for tracing

Print the actual (and correct) name of the tracer it fails to enable.

Link: https://lkml.kernel.org/r/53ef0582605af91eca14b19dba9fc9febb95d4f9.1645206561.git.bristot@kernel.org
Fixes: b1696371d865 ("rtla: Helper functions for rtla")
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

rtla/osnoise: Free params at the exit

The variable that stores the parsed command line arguments are not
being free()d at the rtla osnoise top exit path.

Free params variable before exiting.

Link: https://lkml.kernel.org/r/0be31d8259c7c53b98a39769d60cfeecd8421785.1645206561.git.bristot@kernel.org
Fixes: 1eceb2fc2ca5 ("rtla/osnoise: Add osnoise top mode")
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

rtla/hist: Make -E the short version of --entries

Currently, --entries uses -e as the short version in the hist mode of
timerlat and osnoise tools. But as -e is already used to enable events
on trace sessions by other tools, thus let's keep it available for the
same usage for all rtla tools.

Make -E the short version of --entries for hist mode on all tools.

Note: rtla was merged in this merge window, so rtla was not released yet.

Link: https://lkml.kernel.org/r/5dbf0cbe7364d3a05e708926b41a097c59a02b1e.1645206561.git.bristot@kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing: Fix selftest config check for function graph start up test

CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS is required to test
direct tramp.

Link: https://lkml.kernel.org/r/bdc7e594e13b0891c1d61bc8d56c94b1890eaed7.1640017960.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracefs: Set the group ownership in apply_options() not parse_options()

Al Viro brought it to my attention that the dentries may not be filled
when the parse_options() is called, causing the call to set_gid() to
possibly crash. It should only be called if parse_options() succeeds
totally anyway.

He suggested the logical place to do the update is in apply_options().

Link: https://lore.kernel.org/all/20220225165219.737025658@goodmis.org/
Link: https://lkml.kernel.org/r/20220225153426.1c4cab6b@gandalf.local.home
Cc: stable@vger.kernel.org
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: 48b27b6b5191 ("tracefs: Set all files to the same group ownership as the mount option")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Merge tag 'configfs-5.17-2022-02-25' of git://git.infradead.org/users/hch/configfs

Pull configfs fix from Christoph Hellwig:

- fix a race in configfs_{,un}register_subsystem (ChenXiaoSong)

* tag 'configfs-5.17-2022-02-25' of git://git.infradead.org/users/hch/configfs:
configfs: fix a race in configfs_{,un}register_subsystem()

Merge tag 'for-5.17-rc5-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
"This is a hopefully last batch of fixes for defrag that got broken in
  5.16, all stable material.

  The remaining reported problem is excessive IO with autodefrag due to
  various conditions in the defrag code not met or missing"

* tag 'for-5.17-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: reduce extent threshold for autodefrag
  btrfs: autodefrag: only scan one inode once
  btrfs: defrag: don't use merged extent map for their generation check
  btrfs: defrag: bring back the old file extent search behavior
  btrfs: defrag: remove an ambiguous condition for rejection
  btrfs: defrag: don't defrag extents which are already at max capacity
  btrfs: defrag: don't try to merge regular extents with preallocated extents
  btrfs: defrag: allow defrag_one_cluster() to skip large extent which is not a target
  btrfs: prevent copying too big compressed lzo segment

Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:

- Older "does not even boot" regression in qib from July

- Bug fixes for error unwind in rtrs

- Avoid a deadlock syzkaller found in srp

- Fix another UAF syzkaller found in cma

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/cma: Do not change route.addr.src_addr outside state checks
  RDMA/ib_srp: Fix a deadlock
  RDMA/rtrs-clt: Move free_permit from free_clt to rtrs_clt_close
  RDMA/rtrs-clt: Fix possible double free in error case
  IB/qib: Fix duplicate sysfs directory name

Merge tag 'gpio-fixes-for-v5.17-rc6' of git://git./linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:

- fix an bug generating spurious interrupts in gpio-rockchip

- fix a race condition in gpiod_to_irq() called by GPIO consumers

* tag 'gpio-fixes-for-v5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: Return EPROBE_DEFER if gc->to_irq is NULL
gpio: rockchip: Reset int_bothedge when changing trigger

RDMA/cma: Do not change route.addr.src_addr outside state checks

If the state is not idle then resolve_prepare_src() should immediately
fail and no change to global state should happen. However, it
unconditionally overwrites the src_addr trying to build a temporary any
address.

For instance if the state is already RDMA_CM_LISTEN then this will corrupt
the src_addr and would cause the test in cma_cancel_operation():

           if (cma_any_addr(cma_src_addr(id_priv)) && !id_priv->cma_dev)

Which would manifest as this trace from syzkaller:

  BUG: KASAN: use-after-free in __list_add_valid+0x93/0xa0 lib/list_debug.c:26
  Read of size 8 at addr ffff8881546491e0 by task syz-executor.1/32204

  CPU: 1 PID: 32204 Comm: syz-executor.1 Not tainted 5.12.0-rc8-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:79 [inline]
   dump_stack+0x141/0x1d7 lib/dump_stack.c:120
   print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:232
   __kasan_report mm/kasan/report.c:399 [inline]
   kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:416
   __list_add_valid+0x93/0xa0 lib/list_debug.c:26
   __list_add include/linux/list.h:67 [inline]
   list_add_tail include/linux/list.h:100 [inline]
   cma_listen_on_all drivers/infiniband/core/cma.c:2557 [inline]
   rdma_listen+0x787/0xe00 drivers/infiniband/core/cma.c:3751
   ucma_listen+0x16a/0x210 drivers/infiniband/core/ucma.c:1102
   ucma_write+0x259/0x350 drivers/infiniband/core/ucma.c:1732
   vfs_write+0x28e/0xa30 fs/read_write.c:603
   ksys_write+0x1ee/0x250 fs/read_write.c:658
   do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
   entry_SYSCALL_64_after_hwframe+0x44/0xae

This is indicating that an rdma_id_private was destroyed without doing
cma_cancel_listens().

Instead of trying to re-use the src_addr memory to indirectly create an
any address derived from the dst build one explicitly on the stack and
bind to that as any other normal flow would do. rdma_bind_addr() will copy
it over the src_addr once it knows the state is valid.

This is similar to commit bc0bdc5afaa7 ("RDMA/cma: Do not change
route.addr.src_addr.ss_family")

Link: https://lore.kernel.org/r/0-v2-e975c8fd9ef2+11e-syz_cma_srcaddr_jgg@nvidia.com
Cc: stable@vger.kernel.org
Fixes: 732d41c545bb ("RDMA/cma: Make the locking for automatic state transition more clear")
Reported-by: syzbot+c94a3675a626f6333d74@syzkaller.appspotmail.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Merge tag 'spi-fix-v5.17-rc5' of git://git./linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
"A few small driver specific fixes"

* tag 'spi-fix-v5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: rockchip: terminate dma transmission when slave abort
  spi: rockchip: Fix error in getting num-cs property
  spi: spi-zynq-qspi: Fix a NULL pointer dereference in zynq_qspi_exec_mem_op()

Merge tag 'regulator-fix-v5.17-rc5' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
"A series of fixes for the da9121 driver"

* tag 'regulator-fix-v5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: da9121: Remove surplus DA9141 parameters
  regulator: da9121: Fix DA914x voltage value
  regulator: da9121: Fix DA914x current values

Merge tag 'regmap-fix-v5.17-rc5' of git://git./linux/kernel/git/broonie/regmap

Pull regmap fix from Mark Brown:
"A fix for interrupt controllers which require the explicit
  acknowledgement of interrupts using a different register to the one
  where interrupts are reported.

  Urgent for the few devices this affects"

* tag 'regmap-fix-v5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap-irq: Update interrupt clear register for proper reset

Merge tag 'thermal-5.17-rc6' of git://git./linux/kernel/git/rafael/linux-pm

Pull thermal control fix from Rafael Wysocki:
"Fix a memory leak in the int340x thermal driver's ACPI notify handler
(Chuansheng Liu)"

* tag 'thermal-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: int340x: fix memory leak in int3400_notify()

Merge tag 'pm-5.17-rc6' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
"Fix the throttle IRQ handling during cpufreq initialization on
  Qualcomm platforms (Bjorn Andersson)"

* tag 'pm-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: qcom-hw: Delay enabling throttle_irq
  cpufreq: Reintroduce ready() callback

Merge tag 'char-misc-5.17-rc6' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
"Here are a few small driver fixes for 5.17-rc6 for reported issues.

  The majority of these are IIO fixes for small things, and the other
  two are a mvmem and mtd core conflict fix.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  mtd: core: Fix a conflict between MTD and NVMEM on wp-gpios property
  nvmem: core: Fix a conflict between MTD and NVMEM on wp-gpios property
  iio: imu: st_lsm6dsx: wait for settling time in st_lsm6dsx_read_oneshot
  iio: Fix error handling for PM
  iio: addac: ad74413r: correct comparator gpio getters mask usage
  iio: addac: ad74413r: use ngpio size when iterating over mask
  iio: addac: ad74413r: Do not reference negative array offsets
  iio: adc: men_z188_adc: Fix a resource leak in an error handling path
  iio: frequency: admv1013: remove the always true condition
  iio: accel: fxls8962af: add padding to regmap for SPI
  iio:imu:adis16480: fix buffering for devices with no burst mode
  iio: adc: ad7124: fix mask used for setting AIN_BUFP & AIN_BUFM bits
  iio: adc: tsc2046: fix memory corruption by preventing array overflow

Merge tag 'driver-core-5.17-rc6' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core fix from Greg KH:
"Here is a single driver core fix for 5.17-rc6. It resolves a reported
  problem when the DMA map of a device is not properly released.

  It has been in linux-next with no reported problems"

* tag 'driver-core-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: Free DMA range map when device is released

Merge tag 'staging-5.17-rc6' of git://git./linux/kernel/git/gregkh/staging

Pull staging driver fix from Greg KH:
"Here is a single staging driver fix for 5.17-rc6.

  It resolves a reported problem in the fbtft fb_st7789v.c driver that
  could cause the display to be flipped in cold weather.

  It has been in linux-next with no reported problems"

* tag 'staging-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: fbtft: fb_st7789v: reset display before initialization

Merge tag 'tty-5.17-rc6' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial driver fixes from Greg KH:
"Here are some small n_gsm and sc16is7xx serial driver fixes for
  5.17-rc6.

  The n_gsm fixes are from Siemens as it seems they are using the line
  discipline and fixing up a number of issues they found in their
  testing. The sc16is7xx serial driver fix is for a reported problem
  with that chip.

  All of these have been in linux-next with no reported problems"

* tag 'tty-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  sc16is7xx: Fix for incorrect data being transmitted
  tty: n_gsm: fix deadlock in gsmtty_open()
  tty: n_gsm: fix wrong modem processing in convergence layer type 2
  tty: n_gsm: fix wrong tty control line for flow control
  tty: n_gsm: fix NULL pointer access due to DLCI release
  tty: n_gsm: fix proper link termination after failed open
  tty: n_gsm: fix encoding of command/response bit
  tty: n_gsm: fix encoding of control signal octet bit DV

Merge tag 'usb-5.17-rc6' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for 5.17-rc6 to resolve
  reported problems and add new device ids. They include:

   - dwc3:
      - device mapping fix
      - new device ids
      - driver fixes

   - xhci driver fixes

   - gadget driver fixes

   - usb-serial driver device id updates

  All of these have been in linux-next with no reported problems"

* tag 'usb-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: rndis: add spinlock for rndis response list
  usb: dwc3: gadget: Let the interrupt handler disable bottom halves.
  USB: gadget: validate endpoint index for xilinx udc
  USB: serial: option: add Telit LE910R1 compositions
  USB: serial: option: add support for DW5829e
  Revert "USB: serial: ch341: add new Product ID for CH341A"
  usb: dwc2: drd: fix soft connect when gadget is unconfigured
  usb: dwc3: pci: Fix Bay Trail phy GPIO mappings
  tps6598x: clear int mask on probe failure
  xhci: Prevent futile URB re-submissions due to incorrect return value.
  xhci: re-initialize the HC during resume if HCE was set
  usb: dwc3: pci: Add "snps,dis_u2_susphy_quirk" for Intel Bay Trail
  usb: dwc3: pci: add support for the Intel Raptor Lake-S

Merge tag 'ata-5.17-rc6' of git://git./linux/kernel/git/dlemoal/libata

Pull ata fixes from Damien Le Moal:
"Two fixes for the pata_hpt37x driver, both from Sergey:

   - Fix a PCI register access using an incorrect size (8bits instead of
     16bits)

   - Make sure to always disable the primary channel as it is unused"

* tag 'ata-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: pata_hpt37x: disable primary channel on HPT371
  ata: pata_hpt37x: fix PCI clock detection

tracing/osnoise: Make osnoise_main to sleep for microseconds

osnoise's runtime and period are in the microseconds scale, but it is
currently sleeping in the millisecond's scale. This behavior roots in the
usage of hwlat as the skeleton for osnoise.

Make osnoise to sleep in the microseconds scale. Also, move the sleep to
a specialized function.

Link: https://lkml.kernel.org/r/302aa6c7bdf2d131719b22901905e9da122a11b2.1645197336.git.bristot@kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

ftrace: Remove unused ftrace_startup_enable() stub

When building with clang + CONFIG_DYNAMIC_FTRACE=n + W=1, there is a
warning:

  kernel/trace/ftrace.c:7194:20: error: unused function 'ftrace_startup_enable' [-Werror,-Wunused-function]
  static inline void ftrace_startup_enable(int command) { }
                     ^
  1 error generated.

Clang warns on instances of static inline functions in .c files with W=1
after commit 6863f5643dd7 ("kbuild: allow Clang to find unused static
inline functions for W=1 build").

The ftrace_startup_enable() stub has been unused since
commit e1effa0144a1 ("ftrace: Annotate the ops operation on update"),
where its use outside of the CONFIG_DYNAMIC_TRACE section was replaced
by ftrace_startup_all().  Remove it to resolve the warning.

Link: https://lkml.kernel.org/r/20220214192847.488166-1-nathan@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing: Ensure trace buffer is at least 4096 bytes large

Booting the kernel with 'trace_buf_size=1' give a warning at
boot during the ftrace selftests:

[    0.892809] Running postponed tracer tests:
[    0.892893] Testing tracer function:
[    0.901899] Callback from call_rcu_tasks_trace() invoked.
[    0.983829] Callback from call_rcu_tasks_rude() invoked.
[    1.072003] .. bad ring buffer .. corrupted trace buffer ..
[    1.091944] Callback from call_rcu_tasks() invoked.
[    1.097695] PASSED
[    1.097701] Testing dynamic ftrace: .. filter failed count=0 ..FAILED!
[    1.353474] ------------[ cut here ]------------
[    1.353478] WARNING: CPU: 0 PID: 1 at kernel/trace/trace.c:1951 run_tracer_selftest+0x13c/0x1b0

Therefore enforce a minimum of 4096 bytes to make the selftest pass.

Link: https://lkml.kernel.org/r/20220214134456.1751749-1-svens@linux.ibm.com
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing: Uninline trace_trigger_soft_disabled() partly

On a powerpc32 build with CONFIG_CC_OPTIMISE_FOR_SIZE, the inline
keyword is not honored and trace_trigger_soft_disabled() appears
approx 50 times in vmlinux.

Adding -Winline to the build, the following message appears:

./include/linux/trace_events.h:712:1: error: inlining failed in call to 'trace_trigger_soft_disabled': call is unlikely and code size would grow [-Werror=inline]

That function is rather big for an inlined function:

c003df60 <trace_trigger_soft_disabled>:
c003df60: 94 21 ff f0 stwu    r1,-16(r1)
c003df64: 7c 08 02 a6 mflr    r0
c003df68: 90 01 00 14 stw     r0,20(r1)
c003df6c: bf c1 00 08 stmw    r30,8(r1)
c003df70: 83 e3 00 24 lwz     r31,36(r3)
c003df74: 73 e9 01 00 andi.   r9,r31,256
c003df78: 41 82 00 10 beq     c003df88 <trace_trigger_soft_disabled+0x28>
c003df7c: 38 60 00 00 li      r3,0
c003df80: 39 61 00 10 addi    r11,r1,16
c003df84: 4b fd 60 ac b       c0014030 <_rest32gpr_30_x>
c003df88: 73 e9 00 80 andi.   r9,r31,128
c003df8c: 7c 7e 1b 78 mr      r30,r3
c003df90: 41 a2 00 14 beq     c003dfa4 <trace_trigger_soft_disabled+0x44>
c003df94: 38 c0 00 00 li      r6,0
c003df98: 38 a0 00 00 li      r5,0
c003df9c: 38 80 00 00 li      r4,0
c003dfa0: 48 05 c5 f1 bl      c009a590 <event_triggers_call>
c003dfa4: 73 e9 00 40 andi.   r9,r31,64
c003dfa8: 40 82 00 28 bne     c003dfd0 <trace_trigger_soft_disabled+0x70>
c003dfac: 73 ff 02 00 andi.   r31,r31,512
c003dfb0: 41 82 ff cc beq     c003df7c <trace_trigger_soft_disabled+0x1c>
c003dfb4: 80 01 00 14 lwz     r0,20(r1)
c003dfb8: 83 e1 00 0c lwz     r31,12(r1)
c003dfbc: 7f c3 f3 78 mr      r3,r30
c003dfc0: 83 c1 00 08 lwz     r30,8(r1)
c003dfc4: 7c 08 03 a6 mtlr    r0
c003dfc8: 38 21 00 10 addi    r1,r1,16
c003dfcc: 48 05 6f 6c b       c0094f38 <trace_event_ignore_this_pid>
c003dfd0: 38 60 00 01 li      r3,1
c003dfd4: 4b ff ff ac b       c003df80 <trace_trigger_soft_disabled+0x20>

However it is located in a hot path so inlining it is important.
But forcing inlining of the entire function by using __always_inline
leads to increasing the text size by approx 20 kbytes.

Instead, split the fonction in two parts, one part with the likely
fast path, flagged __always_inline, and a second part out of line.

With this change, on a powerpc32 with CONFIG_CC_OPTIMISE_FOR_SIZE
vmlinux text increases by only 1,4 kbytes, which is partly
compensated by a decrease of vmlinux data by 7 kbytes.

On ppc64_defconfig which has CONFIG_CC_OPTIMISE_FOR_SPEED, this
change reduces vmlinux text by more than 30 kbytes.

Link: https://lkml.kernel.org/r/69ce0986a52d026d381d612801d978aa4f977460.1644563295.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

eprobes: Remove redundant event type information

Currently, the event probes save the type of the event they are attached
to when recording the event. For example:

  # echo 'e:switch sched/sched_switch prev_state=$prev_state prev_prio=$prev_prio next_pid=$next_pid next_prio=$next_prio' > dynamic_events
  # cat events/eprobes/switch/format

name: switch
ID: 1717
format:
        field:unsigned short common_type;       offset:0;       size:2; signed:0;
        field:unsigned char common_flags;       offset:2;       size:1; signed:0;
        field:unsigned char common_preempt_count;       offset:3;       size:1; signed:0;
        field:int common_pid;   offset:4;       size:4; signed:1;

        field:unsigned int __probe_type;        offset:8;       size:4; signed:0;
        field:u64 prev_state;   offset:12;      size:8; signed:0;
        field:u64 prev_prio;    offset:20;      size:8; signed:0;
        field:u64 next_pid;     offset:28;      size:8; signed:0;
        field:u64 next_prio;    offset:36;      size:8; signed:0;

print fmt: "(%u) prev_state=0x%Lx prev_prio=0x%Lx next_pid=0x%Lx next_prio=0x%Lx", REC->__probe_type, REC->prev_state, REC->prev_prio, REC->next_pid, REC->next_prio

The __probe_type adds 4 bytes to every event.

One of the reasons for creating eprobes is to limit what is traced in an
event to be able to limit what is written into the ring buffer. Having
this redundant 4 bytes to every event takes away from this.

The event that is recorded can be retrieved from the event probe itself,
that is available when the trace is happening. For user space tools, it
could simply read the dynamic_event file to find the event they are for.
So there is really no reason to write this information into the ring
buffer for every event.

Link: https://lkml.kernel.org/r/20220218190057.2f5a19a8@gandalf.local.home
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing: Have traceon and traceoff trigger honor the instance

If a trigger is set on an event to disable or enable tracing within an
instance, then tracing should be disabled or enabled in the instance and
not at the top level, which is confusing to users.

Link: https://lkml.kernel.org/r/20220223223837.14f94ec3@rorschach.local.home
Cc: stable@vger.kernel.org
Fixes: ae63b31e4d0e2 ("tracing: Separate out trace events from global variables")
Tested-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

riscv: fix oops caused by irqsoff latency tracer

The trace_hardirqs_{on,off}() require the caller to setup frame pointer
properly. This because these two functions use macro 'CALLER_ADDR1' (aka.
__builtin_return_address(1)) to acquire caller info. If the $fp is used
for other purpose, the code generated this macro (as below) could trigger
memory access fault.

   0xffffffff8011510e <+80>:    ld      a1,-16(s0)
   0xffffffff80115112 <+84>:    ld      s2,-8(a1)  # <-- paging fault here

The oops message during booting if compiled with 'irqoff' tracer enabled:
[    0.039615][    T0] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000f8
[    0.041925][    T0] Oops [#1]
[    0.042063][    T0] Modules linked in:
[    0.042864][    T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.17.0-rc1-00233-g9a20c48d1ed2 #29
[    0.043568][    T0] Hardware name: riscv-virtio,qemu (DT)
[    0.044343][    T0] epc : trace_hardirqs_on+0x56/0xe2
[    0.044601][    T0]  ra : restore_all+0x12/0x6e
[    0.044721][    T0] epc : ffffffff80126a5c ra : ffffffff80003b94 sp : ffffffff81403db0
[    0.044801][    T0]  gp : ffffffff8163acd8 tp : ffffffff81414880 t0 : 0000000000000020
[    0.044882][    T0]  t1 : 0098968000000000 t2 : 0000000000000000 s0 : ffffffff81403de0
[    0.044967][    T0]  s1 : 0000000000000000 a0 : 0000000000000001 a1 : 0000000000000100
[    0.045046][    T0]  a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000
[    0.045124][    T0]  a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000054494d45
[    0.045210][    T0]  s2 : ffffffff80003b94 s3 : ffffffff81a8f1b0 s4 : ffffffff80e27b50
[    0.045289][    T0]  s5 : ffffffff81414880 s6 : ffffffff8160fa00 s7 : 00000000800120e8
[    0.045389][    T0]  s8 : 0000000080013100 s9 : 000000000000007f s10: 0000000000000000
[    0.045474][    T0]  s11: 0000000000000000 t3 : 7fffffffffffffff t4 : 0000000000000000
[    0.045548][    T0]  t5 : 0000000000000000 t6 : ffffffff814aa368
[    0.045620][    T0] status: 0000000200000100 badaddr: 00000000000000f8 cause: 000000000000000d
[    0.046402][    T0] [<ffffffff80003b94>] restore_all+0x12/0x6e

This because the $fp(aka. $s0) register is not used as frame pointer in the
assembly entry code.

resume_kernel:
REG_L s0, TASK_TI_PREEMPT_COUNT(tp)
bnez s0, restore_all
REG_L s0, TASK_TI_FLAGS(tp)
                andi s0, s0, _TIF_NEED_RESCHED
                beqz s0, restore_all
                call preempt_schedule_irq
                j restore_all

To fix above issue, here we add one extra level wrapper for function
trace_hardirqs_{on,off}() so they can be safely called by low level entry
code.

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Fixes: 3c4697982982 ("riscv: Enable LOCKDEP_SUPPORT & fixup TRACE_IRQFLAGS_SUPPORT")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: fix nommu_k210_sdcard_defconfig

Instead of an arbitrary delay, use the "rootwait" kernel option to wait
for the mmc root device to be ready.

Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Fixes: 7e09fd3994c5 ("riscv: Add Canaan Kendryte K210 SD card defconfig")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

tracing: Dump stacktrace trigger to the corresponding instance

The stacktrace event trigger is not dumping the stacktrace to the instance
where it was enabled, but to the global "instance."

Use the private_data, pointing to the trigger file, to figure out the
corresponding trace instance, and use it in the trigger action, like
snapshot_trigger does.

Link: https://lkml.kernel.org/r/afbb0b4f18ba92c276865bc97204d438473f4ebc.1645396236.git.bristot@kernel.org
Cc: stable@vger.kernel.org
Fixes: ae63b31e4d0e2 ("tracing: Separate out trace events from global variables")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Tested-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
"A couple driver fixes in the clk subsystem

   - Fix a hang due to bad clk parent in the Ingenic jz4725b driver

   - Fix SD controllers on Qualcomm MSM8994 SoCs by removing clks that
     shouldn't be touched"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: jz4725b: fix mmc0 clock gating
  clk: qcom: gcc-msm8994: Remove NoC clocks

Merge tag 'drm-fixes-2022-02-25' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Regular drm fixes pull, i915, amdgpu and tegra mostly, all pretty
  small.

  core:
   - edid: Always set RGB444

  tegra:
   - tegra186 suspend/resume fixes
   - syncpoint wait fix
   - build warning fix
   - eDP on older devices fix

  amdgpu:
   - Display FP fix
   - PCO powergating fix
   - RDNA2 OEM SKU stability fixes
   - Display PSR fix
   - PCI ASPM fix
   - Display link encoder fix for TEST_COMMIT
   - Raven2 suspend/resume fix
   - Fix a regression in virtual display support
   - GPUVM eviction fix

  i915:
   - Fix QGV handling on ADL-P+
   - Fix bw atomic check when switching between SAGV vs. no SAGV
   - Disconnect PHYs left connected by BIOS on disabled ports
   - Fix SAVG to no SAGV transitions on TGL+
   - Print PHY name properly on calibration error (DG2)

  imx:
   - dcss: Select GEM CMA helpers

  radeon:
   - Fix some variables's type

  vc4:
   - Fix codec cleanup
   - Fix PM reference counting"

* tag 'drm-fixes-2022-02-25' of git://anongit.freedesktop.org/drm/drm: (24 commits)
  drm/amdgpu: check vm ready by amdgpu_vm->evicting flag
  drm/amdgpu: bypass tiling flag check in virtual display case (v2)
  Revert "drm/amdgpu: add modifiers in amdgpu_vkms_plane_init()"
  drm/amdgpu: do not enable asic reset for raven2
  drm/amd/display: Fix stream->link_enc unassigned during stream removal
  drm/amd: Check if ASPM is enabled from PCIe subsystem
  drm/edid: Always set RGB444
  drm/tegra: dpaux: Populate AUX bus
  drm/radeon: fix variable type
  drm/amd/display: For vblank_disable_immediate, check PSR is really used
  drm/amd/pm: fix some OEM SKU specific stability issues
  drm/amdgpu: disable MMHUB PG for Picasso
  drm/amd/display: Protect update_bw_bounding_box FPU code.
  drm/i915/dg2: Print PHY name properly on calibration error
  drm/i915: Fix bw atomic check when switching between SAGV vs. no SAGV
  drm/i915: Correctly populate use_sagv_wm for all pipes
  drm/i915: Disconnect PHYs left connected by BIOS on disabled ports
  drm/i915: Widen the QGV point mask
  drm/imx/dcss: i.MX8MQ DCSS select DRM_GEM_CMA_HELPER
  drm/vc4: crtc: Fix runtime_pm reference counting
  ...

Merge tag 'perf-tools-fixes-for-v5.17-2022-02-24' of git://git./linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

- Fix double free in in the error path when opening perf.data from
   multiple files in a directory instead of from a single file

- Sync the msr-index.h copy with the kernel sources

- Fix error when printing 'weight' field in 'perf script'

- Skip failing sigtrap test for arm+aarch64 in 'perf test'

- Fix failure to use a cpu list for uncore events in hybrid systems,
   e.g. Intel Alder Lake

* tag 'perf-tools-fixes-for-v5.17-2022-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf script: Fix error when printing 'weight' field
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  perf data: Fix double free in perf_session__delete()
  perf evlist: Fix failed to use cpu list for uncore events
  perf test: Skip failing sigtrap test for arm+aarch64

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"x86 host:

   - Expose KVM_CAP_ENABLE_CAP since it is supported

   - Disable KVM_HC_CLOCK_PAIRING in TSC catchup mode

   - Ensure async page fault token is nonzero

   - Fix lockdep false negative

   - Fix FPU migration regression from the AMX changes

  x86 guest:

   - Don't use PV TLB/IPI/yield on uniprocessor guests

  PPC:

   - reserve capability id (topic branch for ppc/kvm)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: nSVM: disallow userspace setting of MSR_AMD64_TSC_RATIO to non default value when tsc scaling disabled
  KVM: x86/mmu: make apf token non-zero to fix bug
  KVM: PPC: reserve capability 210 for KVM_CAP_PPC_AIL_MODE_3
  x86/kvm: Don't use pv tlb/ipi/sched_yield if on 1 vCPU
  x86/kvm: Fix compilation warning in non-x86_64 builds
  x86/kvm/fpu: Remove kvm_vcpu_arch.guest_supported_xcr0
  x86/kvm/fpu: Limit guest user_xfeatures to supported bits of XCR0
  kvm: x86: Disable KVM_HC_CLOCK_PAIRING if tsc is in always catchup mode
  KVM: Fix lockdep false negative during host resume
  KVM: x86: Add KVM_CAP_ENABLE_CAP to x86

Merge tag 'pci-v5.17-fixes-5' of git://git./linux/kernel/git/helgaas/pci

Pull pci fixes from Bjorn Helgaas:

- Fix a merge error that broke PCI device enumeration on mvebu
   platforms, including Turris Omnia (Armada 385) (Pali Rohár)

- Avoid using ATS on all AMD Navi10 and Navi14 GPUs because some
   VBIOSes don't account for "harvested" (disabled) parts of the chip
   when initializing caches (Alex Deucher)

* tag 'pci-v5.17-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Mark all AMD Navi10 and Navi14 GPU ATS as broken
  PCI: mvebu: Fix device enumeration regression

Merge tag 'net-5.17-rc6' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.

  Current release - regressions:

   - bpf: fix crash due to out of bounds access into reg2btf_ids

   - mvpp2: always set port pcs ops, avoid null-deref

   - eth: marvell: fix driver load from initrd

   - eth: intel: revert "Fix reset bw limit when DCB enabled with 1 TC"

  Current release - new code bugs:

   - mptcp: fix race in overlapping signal events

  Previous releases - regressions:

   - xen-netback: revert hotplug-status changes causing devices to not
     be configured

   - dsa:
      - avoid call to __dev_set_promiscuity() while rtnl_mutex isn't
        held
      - fix panic when removing unoffloaded port from bridge

   - dsa: microchip: fix bridging with more than two member ports

  Previous releases - always broken:

   - bpf:
      - fix crash due to incorrect copy_map_value when both spin lock
        and timer are present in a single value
      - fix a bpf_timer initialization issue with clang
      - do not try bpf_msg_push_data with len 0
      - add schedule points in batch ops

   - nf_tables:
      - unregister flowtable hooks on netns exit
      - correct flow offload action array size
      - fix a couple of memory leaks

   - vsock: don't check owner in vhost_vsock_stop() while releasing

   - gso: do not skip outer ip header in case of ipip and net_failover

   - smc: use a mutex for locking "struct smc_pnettable"

   - openvswitch: fix setting ipv6 fields causing hw csum failure

   - mptcp: fix race in incoming ADD_ADDR option processing

   - sysfs: add check for netdevice being present to speed_show

   - sched: act_ct: fix flow table lookup after ct clear or switching
     zones

   - eth: intel: fixes for SR-IOV forwarding offloads

   - eth: broadcom: fixes for selftests and error recovery

   - eth: mellanox: flow steering and SR-IOV forwarding fixes

  Misc:

   - make __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor
     friends not report freed skbs as drops

   - force inlining of checksum functions in net/checksum.h"

* tag 'net-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
  net: mv643xx_eth: process retval from of_get_mac_address
  ping: remove pr_err from ping_lookup
  Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC"
  openvswitch: Fix setting ipv6 fields causing hw csum failure
  ipv6: prevent a possible race condition with lifetimes
  net/smc: Use a mutex for locking "struct smc_pnettable"
  bnx2x: fix driver load from initrd
  Revert "xen-netback: Check for hotplug-status existence before watching"
  Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"
  net/mlx5e: Fix VF min/max rate parameters interchange mistake
  net/mlx5e: Add missing increment of count
  net/mlx5e: MPLSoUDP decap, fix check for unsupported matches
  net/mlx5e: Fix MPLSoUDP encap to use MPLS action information
  net/mlx5e: Add feature check for set fec counters
  net/mlx5e: TC, Skip redundant ct clear actions
  net/mlx5e: TC, Reject rules with forward and drop actions
  net/mlx5e: TC, Reject rules with drop and modify hdr action
  net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets
  net/mlx5e: Fix wrong return value on ioctl EEPROM query failure
  net/mlx5: Fix possible deadlock on rule deletion
  ...

Merge tag 'drm-intel-fixes-2022-02-24' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix QGV handling on ADL-P+ (Ville Syrjälä)
- Fix bw atomic check when switching between SAGV vs. no SAGV (Ville Syrjälä)
- Disconnect PHYs left connected by BIOS on disabled ports (Imre Deak)
- Fix SAVG to no SAGV transitions on TGL+ (Ville Syrjälä)
- Print PHY name properly on calibration error (DG2) (Matt Roper)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YhdyHwRWkOTWwlqi@tursulin-mobl2

Merge tag 'block-5.17-2022-02-24' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

- NVMe pull request:
    - send H2CData PDUs based on MAXH2CDATA (Varun Prakash)
    - fix passthrough to namespaces with unsupported features (Christoph
      Hellwig)

- Clear iocb->private at poll completion (Stefano)

* tag 'block-5.17-2022-02-24' of git://git.kernel.dk/linux-block:
  nvme-tcp: send H2CData PDUs based on MAXH2CDATA
  nvme: also mark passthrough-only namespaces ready in nvme_update_ns_info
  nvme: don't return an error from nvme_configure_metadata
  block: clear iocb->private in blkdev_bio_end_io_async()

thermal: int340x: fix memory leak in int3400_notify()

It is easy to hit the below memory leaks in my TigerLake platform:

unreferenced object 0xffff927c8b91dbc0 (size 32):
  comm "kworker/0:2", pid 112, jiffies 4294893323 (age 83.604s)
  hex dump (first 32 bytes):
    4e 41 4d 45 3d 49 4e 54 33 34 30 30 20 54 68 65  NAME=INT3400 The
    72 6d 61 6c 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5  rmal.kkkkkkkkkk.
  backtrace:
    [<ffffffff9c502c3e>] __kmalloc_track_caller+0x2fe/0x4a0
    [<ffffffff9c7b7c15>] kvasprintf+0x65/0xd0
    [<ffffffff9c7b7d6e>] kasprintf+0x4e/0x70
    [<ffffffffc04cb662>] int3400_notify+0x82/0x120 [int3400_thermal]
    [<ffffffff9c8b7358>] acpi_ev_notify_dispatch+0x54/0x71
    [<ffffffff9c88f1a7>] acpi_os_execute_deferred+0x17/0x30
    [<ffffffff9c2c2c0a>] process_one_work+0x21a/0x3f0
    [<ffffffff9c2c2e2a>] worker_thread+0x4a/0x3b0
    [<ffffffff9c2cb4dd>] kthread+0xfd/0x130
    [<ffffffff9c201c1f>] ret_from_fork+0x1f/0x30

Fix it by calling kfree() accordingly.

Fixes: 38e44da59130 ("thermal: int3400_thermal: process "thermal table changed" event")
Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge tag 'io_uring-5.17-2022-02-23' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:

- Add a conditional schedule point in io_add_buffers() (Eric)

- Fix for a quiesce speedup merged in this release (Dylan)

- Don't convert to jiffies for event timeout waiting, it's way too
   coarse when we accept a timespec as input (me)

* tag 'io_uring-5.17-2022-02-23' of git://git.kernel.dk/linux-block:
  io_uring: disallow modification of rsrc_data during quiesce
  io_uring: don't convert to jiffies for waiting on timeouts
  io_uring: add a schedule point in io_add_buffers()

Merge branch 'cpufreq/arm/fixes' of git://git./linux/kernel/git/vireshk/pm

Pull ARM cpufreq fixes for 5.18-rc6 from Viresh Kumar:

"This fixes issues related to throttle IRQ for Qcom SoCs."

* 'cpufreq/arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom-hw: Delay enabling throttle_irq
cpufreq: Reintroduce ready() callback

Merge tag 'platform-drivers-x86-v5.17-4' of git://git./linux/kernel/git/pdx86/platform-drivers-x86

Pull more x86 platform driver fixes from Hans de Goede:
"Two more fixes:

   - Fix suspend/resume regression on AMD Cezanne APUs in >= 5.16

   - Fix Microsoft Surface 3 battery readings"

* tag 'platform-drivers-x86-v5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  surface: surface3_power: Fix battery readings on batteries without a serial number
  platform/x86: amd-pmc: Set QOS during suspend on CZN w/ timer wakeup

net: mv643xx_eth: process retval from of_get_mac_address

Obtaining a MAC address may be deferred in cases when the MAC is stored
in an NVMEM block, for example, and it may not be ready upon the first
retrieval attempt and return EPROBE_DEFER.

It is also possible that a port that does not rely on NVMEM has been
already created when getting the defer request. Thus, also the resources
allocated previously must be freed when doing a roll-back.

Fixes: 76723bca2802 ("net: mv643xx_eth: add DT parsing support")
Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220223142337.41757-1-maukka@ext.kapsi.fi
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

KVM: x86: nSVM: disallow userspace setting of MSR_AMD64_TSC_RATIO to non default value when tsc scaling disabled

If nested tsc scaling is disabled, MSR_AMD64_TSC_RATIO should
never have non default value.

Due to way nested tsc scaling support was implmented in qemu,
it would set this msr to 0 when nested tsc scaling was disabled.
Ignore that value for now, as it causes no harm.

Fixes: 5228eb96a487 ("KVM: x86: nSVM: implement nested TSC scaling")
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220223115649.319134-1-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86/mmu: make apf token non-zero to fix bug

In current async pagefault logic, when a page is ready, KVM relies on
kvm_arch_can_dequeue_async_page_present() to determine whether to deliver
a READY event to the Guest. This function test token value of struct
kvm_vcpu_pv_apf_data, which must be reset to zero by Guest kernel when a
READY event is finished by Guest. If value is zero meaning that a READY
event is done, so the KVM can deliver another.
But the kvm_arch_setup_async_pf() may produce a valid token with zero
value, which is confused with previous mention and may lead the loss of
this READY event.

This bug may cause task blocked forever in Guest:
INFO: task stress:7532 blocked for more than 1254 seconds.
       Not tainted 5.10.0 #16
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:stress          state:D stack:    0 pid: 7532 ppid:  1409
flags:0x00000080
Call Trace:
  __schedule+0x1e7/0x650
  schedule+0x46/0xb0
  kvm_async_pf_task_wait_schedule+0xad/0xe0
  ? exit_to_user_mode_prepare+0x60/0x70
  __kvm_handle_async_pf+0x4f/0xb0
  ? asm_exc_page_fault+0x8/0x30
  exc_page_fault+0x6f/0x110
  ? asm_exc_page_fault+0x8/0x30
  asm_exc_page_fault+0x1e/0x30
RIP: 0033:0x402d00
RSP: 002b:00007ffd31912500 EFLAGS: 00010206
RAX: 0000000000071000 RBX: ffffffffffffffff RCX: 00000000021a32b0
RDX: 000000000007d011 RSI: 000000000007d000 RDI: 00000000021262b0
RBP: 00000000021262b0 R08: 0000000000000003 R09: 0000000000000086
R10: 00000000000000eb R11: 00007fefbdf2baa0 R12: 0000000000000000
R13: 0000000000000002 R14: 000000000007d000 R15: 0000000000001000

Signed-off-by: Liang Zhang <zhangliang5@huawei.com>
Message-Id: <20220222031239.1076682-1-zhangliang5@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

ping: remove pr_err from ping_lookup

As Jakub noticed, prints should be avoided on the datapath.
Also, as packets would never come to the else branch in
ping_lookup(), remove pr_err() from ping_lookup().

Fixes: 35a79e64de29 ("ping: fix the dif and sdif check in ping_lookup")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/1ef3f2fcd31bd681a193b1fcf235eee1603819bd.1645674068.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC"

Revert of a patch that instead of fixing a AQ error when trying
to reset BW limit introduced several regressions related to
creation and managing TC. Currently there are errors when creating
a TC on both PF and VF.

Error log:
[17428.783095] i40e 0000:3b:00.1: AQ command Config VSI BW allocation per TC failed = 14
[17428.783107] i40e 0000:3b:00.1: Failed configuring TC map 0 for VSI 391
[17428.783254] i40e 0000:3b:00.1: AQ command Config VSI BW allocation per TC failed = 14
[17428.783259] i40e 0000:3b:00.1: Unable to configure TC map 0 for VSI 391

This reverts commit 3d2504663c41104b4359a15f35670cfa82de1bbf.

Fixes: 3d2504663c41 (i40e: Fix reset bw limit when DCB enabled with 1 TC)
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220223175347.1690692-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

openvswitch: Fix setting ipv6 fields causing hw csum failure

Ipv6 ttl, label and tos fields are modified without first
pulling/pushing the ipv6 header, which would have updated
the hw csum (if available). This might cause csum validation
when sending the packet to the stack, as can be seen in
the trace below.

Fix this by updating skb->csum if available.

Trace resulted by ipv6 ttl dec and then sending packet
to conntrack [actions: set(ipv6(hlimit=63)),ct(zone=99)]:
[295241.900063] s_pf0vf2: hw csum failure
[295241.923191] Call Trace:
[295241.925728]  <IRQ>
[295241.927836]  dump_stack+0x5c/0x80
[295241.931240]  __skb_checksum_complete+0xac/0xc0
[295241.935778]  nf_conntrack_tcp_packet+0x398/0xba0 [nf_conntrack]
[295241.953030]  nf_conntrack_in+0x498/0x5e0 [nf_conntrack]
[295241.958344]  __ovs_ct_lookup+0xac/0x860 [openvswitch]
[295241.968532]  ovs_ct_execute+0x4a7/0x7c0 [openvswitch]
[295241.979167]  do_execute_actions+0x54a/0xaa0 [openvswitch]
[295242.001482]  ovs_execute_actions+0x48/0x100 [openvswitch]
[295242.006966]  ovs_dp_process_packet+0x96/0x1d0 [openvswitch]
[295242.012626]  ovs_vport_receive+0x6c/0xc0 [openvswitch]
[295242.028763]  netdev_frame_hook+0xc0/0x180 [openvswitch]
[295242.034074]  __netif_receive_skb_core+0x2ca/0xcb0
[295242.047498]  netif_receive_skb_internal+0x3e/0xc0
[295242.052291]  napi_gro_receive+0xba/0xe0
[295242.056231]  mlx5e_handle_rx_cqe_mpwrq_rep+0x12b/0x250 [mlx5_core]
[295242.062513]  mlx5e_poll_rx_cq+0xa0f/0xa30 [mlx5_core]
[295242.067669]  mlx5e_napi_poll+0xe1/0x6b0 [mlx5_core]
[295242.077958]  net_rx_action+0x149/0x3b0
[295242.086762]  __do_softirq+0xd7/0x2d6
[295242.090427]  irq_exit+0xf7/0x100
[295242.093748]  do_IRQ+0x7f/0xd0
[295242.096806]  common_interrupt+0xf/0xf
[295242.100559]  </IRQ>
[295242.102750] RIP: 0033:0x7f9022e88cbd
[295242.125246] RSP: 002b:00007f9022282b20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffda
[295242.132900] RAX: 0000000000000005 RBX: 0000000000000010 RCX: 0000000000000000
[295242.140120] RDX: 00007f9022282ba8 RSI: 00007f9022282a30 RDI: 00007f9014005c30
[295242.147337] RBP: 00007f9014014d60 R08: 0000000000000020 R09: 00007f90254a8340
[295242.154557] R10: 00007f9022282a28 R11: 0000000000000246 R12: 0000000000000000
[295242.161775] R13: 00007f902308c000 R14: 000000000000002b R15: 00007f9022b71f40

Fixes: 3fdbd1ce11e5 ("openvswitch: add ipv6 'set' action")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Link: https://lore.kernel.org/r/20220223163416.24096-1-paulb@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv6: prevent a possible race condition with lifetimes

valid_lft, prefered_lft and tstamp are always accessed under the lock
"lock" in other places. Reading these without taking the lock may result
in inconsistencies regarding the calculation of the valid and preferred
variables since decisions are taken on these fields for those variables.

Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Niels Dossche <niels.dossche@ugent.be>
Link: https://lore.kernel.org/r/20220223131954.6570-1-niels.dossche@ugent.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/smc: Use a mutex for locking "struct smc_pnettable"

smc_pnetid_by_table_ib() uses read_lock() and then it calls smc_pnet_apply_ib()
which, in turn, calls mutex_lock(&smc_ib_devices.mutex).

read_lock() disables preemption. Therefore, the code acquires a mutex while in
atomic context and it leads to a SAC bug.

Fix this bug by replacing the rwlock with a mutex.

Reported-and-tested-by: syzbot+4f322a6d84e991c38775@syzkaller.appspotmail.com
Fixes: 64e28b52c7a6 ("net/smc: add pnet table namespace support")
Confirmed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/20220223100252.22562-1-fmdefrancesco@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bnx2x: fix driver load from initrd

Commit b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0") added
new firmware support in the driver with maintaining older firmware
compatibility. However, older firmware was not added in MODULE_FIRMWARE()
which caused missing firmware files in initrd image leading to driver load
failure from initrd. This patch adds MODULE_FIRMWARE() for older firmware
version to have firmware files included in initrd.

Fixes: b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215627
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20220223085720.12021-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Revert "xen-netback: Check for hotplug-status existence before watching"

This reverts commit 2afeec08ab5c86ae21952151f726bfe184f6b23d.

The reasoning in the commit was wrong - the code expected to setup the
watch even if 'hotplug-status' didn't exist. In fact, it relied on the
watch being fired the first time - to check if maybe 'hotplug-status' is
already set to 'connected'. Not registering a watch for non-existing
path (which is the case if hotplug script hasn't been executed yet),
made the backend not waiting for the hotplug script to execute. This in
turns, made the netfront think the interface is fully operational, while
in fact it was not (the vif interface on xen-netback side might not be
configured yet).

This was a workaround for 'hotplug-status' erroneously being removed.
But since that is reverted now, the workaround is not necessary either.

More discussion at
https://lore.kernel.org/xen-devel/afedd7cb-a291-e773-8b0d-4db9b291fa98@ipxe.org/T/#u

Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Michael Brown <mbrown@fensystems.co.uk>
Link: https://lore.kernel.org/r/20220222001817.2264967-2-marmarek@invisiblethingslab.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"

This reverts commit 1f2565780e9b7218cf92c7630130e82dcc0fe9c2.

The 'hotplug-status' node should not be removed as long as the vif
device remains configured. Otherwise the xen-netback would wait for
re-running the network script even if it was already called (in case of
the frontent re-connecting). But also, it _should_ be removed when the
vif device is destroyed (for example when unbinding the driver) -
otherwise hotplug script would not configure the device whenever it
re-appear.

Moving removal of the 'hotplug-status' node was a workaround for nothing
calling network script after xen-netback module is reloaded. But when
vif interface is re-created (on xen-netback unbind/bind for example),
the script should be called, regardless of who does that - currently
this case is not handled by the toolstack, and requires manual
script call. Keeping hotplug-status=connected to skip the call is wrong
and leads to not configured interface.

More discussion at
https://lore.kernel.org/xen-devel/afedd7cb-a291-e773-8b0d-4db9b291fa98@ipxe.org/T/#u

Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20220222001817.2264967-1-marmarek@invisiblethingslab.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

btrfs: reduce extent threshold for autodefrag

There is a big gap between inode_should_defrag() and autodefrag extent
size threshold.  For inode_should_defrag() it has a flexible
@small_write value. For compressed extent is 16K, and for non-compressed
extent it's 64K.

However for autodefrag extent size threshold, it's always fixed to the
default value (256K).

This means, the following write sequence will trigger autodefrag to
defrag ranges which didn't trigger autodefrag:

  pwrite 0 8k
  sync
  pwrite 8k 128K
  sync

The latter 128K write will also be considered as a defrag target (if
other conditions are met). While only that 8K write is really
triggering autodefrag.

Such behavior can cause extra IO for autodefrag.

Close the gap, by copying the @small_write value into inode_defrag, so
that later autodefrag can use the same @small_write value which
triggered autodefrag.

With the existing transid value, this allows autodefrag really to scan
the ranges which triggered autodefrag.

Although this behavior change is mostly reducing the extent_thresh value
for autodefrag, I believe in the future we should allow users to specify
the autodefrag extent threshold through mount options, but that's an
other problem to consider in the future.

CC: stable@vger.kernel.org # 5.16+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Merge tag 'nvme-5.17-2022-02-24' of git://git.infradead.org/nvme into block-5.17

Pull NVMe fixes from Christoph:

"nvme fixes for Linux 5.17

- send H2CData PDUs based on MAXH2CDATA (Varun Prakash)
- fix passthrough to namespaces with unsupported features (me)"

* tag 'nvme-5.17-2022-02-24' of git://git.infradead.org/nvme:
  nvme-tcp: send H2CData PDUs based on MAXH2CDATA
  nvme: also mark passthrough-only namespaces ready in nvme_update_ns_info
  nvme: don't return an error from nvme_configure_metadata

Merge tag 'usb-serial-5.17-rc6' of https://git./linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial fixes for 5.17-rc6

Here's a revert of a commit which erroneously added a device id used for
the EPP/MEM mode of ch341 devices.

Included are also some new modem device ids.

All have been in linux-next with no reported issues.

* tag 'usb-serial-5.17-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: option: add Telit LE910R1 compositions
  USB: serial: option: add support for DW5829e
  Revert "USB: serial: ch341: add new Product ID for CH341A"

surface: surface3_power: Fix battery readings on batteries without a serial number

The battery on the 2nd hand Surface 3 which I recently bought appears to
not have a serial number programmed in. This results in any I2C reads from
the registers containing the serial number failing with an I2C NACK.

This was causing mshw0011_bix() to fail causing the battery readings to
not work at all.

Ignore EREMOTEIO (I2C NACK) errors when retrieving the serial number and
continue with an empty serial number to fix this.

Fixes: b1f81b496b0d ("platform/x86: surface3_power: MSHW0011 rev-eng implementation")
BugLink: https://github.com/linux-surface/linux-surface/issues/608
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220224101848.7219-1-hdegoede@redhat.com

platform/x86: amd-pmc: Set QOS during suspend on CZN w/ timer wakeup

commit 59348401ebed ("platform/x86: amd-pmc: Add special handling for
timer based S0i3 wakeup") adds support for using another platform timer
in lieu of the RTC which doesn't work properly on some systems. This path
was validated and worked well before submission. During the 5.16-rc1 merge
window other patches were merged that caused this to stop working properly.

When this feature was used with 5.16-rc1 or later some OEM laptops with the
matching firmware requirements from that commit would shutdown instead of
program a timer based wakeup.

This was bisected to commit 8d89835b0467 ("PM: suspend: Do not pause
cpuidle in the suspend-to-idle path"). This wasn't supposed to cause any
negative impacts and also tested well on both Intel and ARM platforms.
However this changed the semantics of when CPUs are allowed to be in the
deepest state. For the AMD systems in question it appears this causes a
firmware crash for timer based wakeup.

It's hypothesized to be caused by the `amd-pmc` driver sending `OS_HINT`
and all the CPUs going into a deep state while the timer is still being
programmed. It's likely a firmware bug, but to avoid it don't allow setting
CPUs into the deepest state while using CZN timer wakeup path.

If later it's discovered that this also occurs from "regular" suspends
without a timer as well or on other silicon, this may be later expanded to
run in the suspend path for more scenarios.

Cc: stable@vger.kernel.org # 5.16+
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/linux-acpi/BL1PR12MB51570F5BD05980A0DCA1F3F4E23A9@BL1PR12MB5157.namprd12.prod.outlook.com/T/#mee35f39c41a04b624700ab2621c795367f19c90e
Fixes: 8d89835b0467 ("PM: suspend: Do not pause cpuidle in the suspend-to-idle path")
Fixes: 23f62d7ab25b ("PM: sleep: Pause cpuidle later and resume it earlier during system transitions")
Fixes: 59348401ebed ("platform/x86: amd-pmc: Add special handling for timer based S0i3 wakeup"
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220223175237.6209-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

usb: gadget: rndis: add spinlock for rndis response list

There's no lock for rndis response list. It could cause list corruption
if there're two different list_add at the same time like below.
It's better to add in rndis_add_response / rndis_free_response
/ rndis_get_next_response to prevent any race condition on response list.

[  361.894299] [1:   irq/191-dwc3:16979] list_add corruption.
next->prev should be prev (ffffff80651764d0),
but was ffffff883dc36f80. (next=ffffff80651764d0).

[  361.904380] [1:   irq/191-dwc3:16979] Call trace:
[  361.904391] [1:   irq/191-dwc3:16979]  __list_add_valid+0x74/0x90
[  361.904401] [1:   irq/191-dwc3:16979]  rndis_msg_parser+0x168/0x8c0
[  361.904409] [1:   irq/191-dwc3:16979]  rndis_command_complete+0x24/0x84
[  361.904417] [1:   irq/191-dwc3:16979]  usb_gadget_giveback_request+0x20/0xe4
[  361.904426] [1:   irq/191-dwc3:16979]  dwc3_gadget_giveback+0x44/0x60
[  361.904434] [1:   irq/191-dwc3:16979]  dwc3_ep0_complete_data+0x1e8/0x3a0
[  361.904442] [1:   irq/191-dwc3:16979]  dwc3_ep0_interrupt+0x29c/0x3dc
[  361.904450] [1:   irq/191-dwc3:16979]  dwc3_process_event_entry+0x78/0x6cc
[  361.904457] [1:   irq/191-dwc3:16979]  dwc3_process_event_buf+0xa0/0x1ec
[  361.904465] [1:   irq/191-dwc3:16979]  dwc3_thread_interrupt+0x34/0x5c

Fixes: f6281af9d62e ("usb: gadget: rndis: use list_for_each_entry_safe")
Cc: stable <stable@kernel.org>
Signed-off-by: Daehwan Jung <dh10.jung@samsung.com>
Link: https://lore.kernel.org/r/1645507768-77687-1-git-send-email-dh10.jung@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Let the interrupt handler disable bottom halves.

The interrupt service routine registered for the gadget is a primary
handler which mask the interrupt source and a threaded handler which
handles the source of the interrupt. Since the threaded handler is
voluntary threaded, the IRQ-core does not disable bottom halves before
invoke the handler like it does for the forced-threaded handler.

Due to changes in networking it became visible that a network gadget's
completions handler may schedule a softirq which remains unprocessed.
The gadget's completion handler is usually invoked either in hard-IRQ or
soft-IRQ context. In this context it is enough to just raise the softirq
because the softirq itself will be handled once that context is left.
In the case of the voluntary threaded handler, there is nothing that
will process pending softirqs. Which means it remain queued until
another random interrupt (on this CPU) fires and handles it on its exit
path or another thread locks and unlocks a lock with the bh suffix.
Worst case is that the CPU goes idle and the NOHZ complains about
unhandled softirqs.

Disable bottom halves before acquiring the lock (and disabling
interrupts) and enable them after dropping the lock. This ensures that
any pending softirqs will handled right away.

Link: https://lkml.kernel.org/r/c2a64979-73d1-2c22-e048-c275c9f81558@samsung.com
Fixes: e5f68b4a3e7b0 ("Revert "usb: dwc3: gadget: remove unnecessary _irqsave()"")
Cc: stable <stable@kernel.org>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/Yg/YPejVQH3KkRVd@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: gadget: validate endpoint index for xilinx udc

Assure that host may not manipulate the index to point
past endpoint array.

Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'mlx5-fixes-2022-02-23' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5 fixes 2022-02-22

This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.

* tag 'mlx5-fixes-2022-02-23' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: Fix VF min/max rate parameters interchange mistake
  net/mlx5e: Add missing increment of count
  net/mlx5e: MPLSoUDP decap, fix check for unsupported matches
  net/mlx5e: Fix MPLSoUDP encap to use MPLS action information
  net/mlx5e: Add feature check for set fec counters
  net/mlx5e: TC, Skip redundant ct clear actions
  net/mlx5e: TC, Reject rules with forward and drop actions
  net/mlx5e: TC, Reject rules with drop and modify hdr action
  net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets
  net/mlx5e: Fix wrong return value on ioctl EEPROM query failure
  net/mlx5: Fix possible deadlock on rule deletion
  net/mlx5: Fix tc max supported prio for nic mode
  net/mlx5: Fix wrong limitation of metadata match on ecpf
  net/mlx5: Update log_max_qp value to be 17 at most
  net/mlx5: DR, Fix the threshold that defines when pool sync is initiated
  net/mlx5: DR, Don't allow match on IP w/o matching on full ethertype/ip_version
  net/mlx5: DR, Fix slab-out-of-bounds in mlx5_cmd_dr_create_fte
  net/mlx5: DR, Cache STE shadow memory
  net/mlx5: Update the list of the PCI supported devices
====================

Link: https://lore.kernel.org/r/20220224001123.365265-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'amd-drm-fixes-5.17-2022-02-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.17-2022-02-23:

amdgpu:
- Display FP fix
- PCO powergating fix
- RDNA2 OEM SKU stability fixes
- Display PSR fix
- PCI ASPM fix
- Display link encoder fix for TEST_COMMIT
- Raven2 suspend/resume fix
- Fix a regression in virtual display support
- GPUVM eviction fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223214623.28823-1-alexander.deucher@amd.com

Merge tag 'drm/tegra/for-5.17-rc6' of https://gitlab.freedesktop.org/drm/tegra into drm-fixes

drm/tegra: Fixes for v5.17-rc6

Contains a couple of fixes for Tegra186 suspend/resume, syncpoint
waiting, a build warning and eDP on older Tegra devices.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223161903.293392-1-thierry.reding@gmail.com

Merge tag 'drm-misc-fixes-2022-02-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

* edid: Always set RGB444
* imx/dcss: Select GEM CMA helpers
* radeon: Fix some variables's type
* vc4: Fix codec cleanup; Fix PM reference counting

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YhaKj4zWJ42YWRts@linux-uq9g.fritz.box

rtla: Fix systme -> system typo on man page

Link: https://lkml.kernel.org/r/YhZsZxqk+IaFxorj@kernel.org
Fixes: 496082df01bb08a4 ("rtla: Add rtla osnoise man page")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Merge tag 'devicetree-fixes-for-5.17-2' of git://git./linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

- Update some maintainers email addresses

- Fix handling of elfcorehdr reservation for crash dump kernel

- Fix unittest expected warnings text

* tag 'devicetree-fixes-for-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: update Roger Quadros email
  MAINTAINERS: sifive: drop Yash Shah
  of/fdt: move elfcorehdr reservation early for crash dump kernel
  of: unittest: update text of expected warnings

Merge tag 'selinux-pr-20220223' of git://git./linux/kernel/git/pcmoore/selinux

Pull selinux fix from Paul Moore:
"A second small SELinux fix which addresses an incorrect
mutex_is_locked() check"

* tag 'selinux-pr-20220223' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix misuse of mutex_is_locked()

net/mlx5e: Fix VF min/max rate parameters interchange mistake

The VF min and max rate were passed incorrectly and resulted in wrongly
interchanging them. Fix the order of parameters in
mlx5_esw_qos_set_vport_rate().

Fixes: d7df09f5e7b4 ("net/mlx5: E-switch, Enable vport QoS on demand")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Add missing increment of count

Add mistakenly missing increment of count variable when looping over
output buffer in mlx5e_self_test().

This resolves the issue of garbage values output when querying with self
test via ethtool.

before:
$ ethtool -t eth2
The test result is PASS
The test extra info:
Link Test        0
Speed Test       1768697188
Health Test      758528120
Loopback Test    3288687

after:
$ ethtool -t eth2
The test result is PASS
The test extra info:
Link Test        0
Speed Test       0
Health Test      0
Loopback Test    0

Fixes: 7990b1b5e8bd ("net/mlx5e: loopback test is not supported in switchdev mode")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: MPLSoUDP decap, fix check for unsupported matches

Currently offload of rule on bareudp device require tunnel key
in order to match on mpls fields and without it the mpls fields
are ignored, this is incorrect due to the fact udp tunnel doesn't
have key to match on.

Fix by returning error in case flow is matching on tunnel key.

Fixes: 72046a91d134 ("net/mlx5e: Allow to match on mpls parameters")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Fix MPLSoUDP encap to use MPLS action information

Currently the MPLSoUDP encap builds the MPLS header using encap action
information (tunnel id, ttl and tos) instead of the MPLS action
information (label, ttl, tc and bos) which is wrong.

Fix by storing the MPLS action information during the flow action
parse and later using it to create the encap MPLS header.

Fixes: f828ca6a2fb6 ("net/mlx5e: Add support for hw encapsulation of MPLS over UDP")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>