Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Fixing to avoid invalid kfree() in cifs_get_tcp_session()

ray_cs: Fix copy_from_user handling

I've not touched the other stuff here but the word "locking" comes to mind.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dpt_i2o: Fix up copy*user

Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/ppc64: Use preempt_schedule_irq instead of preempt_schedule
  powerpc: Minor cleanup to lib/Kconfig.debug
  powerpc: Minor cleanup to sound/ppc/Kconfig
  powerpc: Minor cleanup to init/Kconfig
  powerpc: Limit memory hotplug support to PPC64 Book-3S machines
  powerpc: Limit hugetlbfs support to PPC64 Book-3S machines
  powerpc: Fix compile errors found by new ppc64e_defconfig
  powerpc: Add a Book-3E 64-bit defconfig
  powerpc/booke: Fix xmon single step on PowerPC Book-E
  powerpc: Align vDSO base address
  powerpc: Fix segment mapping in vdso32
  powerpc/iseries: Remove compiler version dependent hack
  powerpc/perf_events: Fix priority of MSR HV vs PR bits
  powerpc/5200: Update defconfigs
  drivers/serial/mpc52xx_uart.c: Use UPIO_MEM rather than SERIAL_IO_MEM
  powerpc/boot/dts: drop obsolete 'fsl5200-clocking'
  of: Remove nested function
  mpc5200: support for the MAN mpc5200 based board mucmc52
  mpc5200: support for the MAN mpc5200 based board uc101

Merge branch 'for-linus' of git://git./linux/kernel/git/sameo/mfd-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: Do not dereference null pointer in twl4030 error path
  mfd: Always initialise WM831x IRQ mutex

Merge branch 'hwpoison-2.6.32' of git://git./linux/kernel/git/ak/linux-mce-2.6

* 'hwpoison-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6:
  HWPOISON: fix invalid page count in printk output
  HWPOISON: Allow schedule_on_each_cpu() from keventd
  HWPOISON: fix/proc/meminfo alignment
  HWPOISON: fix oops on ksm pages
  HWPOISON: Fix page count leak in hwpoison late kill in do_swap_page
  HWPOISON: return early on non-LRU pages
  HWPOISON: Add brief hwpoison description to Documentation
  HWPOISON: Clean up PR_MCE_KILL interface

Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: fix double IRELE in xfs_dqrele_inode

Merge branch 'omap-fixes-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omap4: Fix UART4 platform data on omap4
  omap4: Allow omap_serial_early_init() for OMAP4430 board
  omap3: PM: enable UART3 module wakeups
  omap2: Fix console serial port number for n8x0
  omap2: Fix detection of n8x0
  omap1: Fix DSP public peripherals support for ams-delta
  omap1: Fix redundant UARTs pin muxing that can break other hardware support
  omap: iommu: fix wrong condition check for SUPERSECTION
  omap: SDMA: Fix omap_stop_dma() API for channel linking
  omap: Fix omap-keypad by restoring old keypad.h without breaking omap2 boards that use matrix_keypad

Merge branch 'for-linus' of git://git.infradead.org/ubi-2.6

* 'for-linus' of git://git.infradead.org/ubi-2.6:
  UBI: fix check on unsigned long
  UBI: fix backward compatibility

Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (it87) Fix VID reading on IT8718F/IT8720F
  hwmon: (dme1737) No vid attributes for SCH311x
  hwmon: (fschmd) Fix check on unsigned in watchdog_write()
  hwmon: (coretemp) Maintainer update

Merge branch 'urgent-v2' of git://git./linux/kernel/git/brodo/pcmcia-2.6

* 'urgent-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: do not load the pd6729 driver if io_base is NULL
  pcmcia: Fix possible printk format warnings
  pcmcia: do not try to store more than 4 version strings
  pcmcia: pccard_read_tuple and TUPLE_RETURN_COMMON cleanup
  pcmcia: properly close previous dev_printk if kzalloc fails in do_io_probe
  pcmcia: fix controller printk format warnings

Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: (22 commits)
  ARM: Fix lubbock defconfig build
  ARM: 5769/1: CPU_ARM920T: remove dead Maverick EP9312 URL
  ARM: 5768/1: ep93xx: remove dead code in ep93xx_gpio_ab_irq_handler()
  ARM: 5767/1: ep93xx: remove ep93xx_init_time() prototype
  ARM: 5765/1: Updated U300 defconfig
  ARM: 5766/1: Fix watchdog enabling for AT91SAM9G45
  ARM: 5764/1: bcmring: add oprofile pmu support
  [ARM] pxa/spitz: add gpio button support (fixes regression)
  [ARM] pxa/cm-x300: fix mmc numbering
  ARM: 5763/1: ARM: SMP: Fix the BUG with CONFIG_PREEMPT enabled
  ARM: 5760/1: ep93xx: fix build error in edb93xx.c
  ARM: 5759/1: Add register information of threads to coredump
  ARM: 5757/1: Thumb-2: Correct "mov.w pc, lr" instruction which is unpredictable
  MXC: fix reset for mx31, mx35 and mx27 SoCs
  fix pcm037_eet compilation with the new SPI driver
  fix compilation of i.MX31 platforms
  pcm970 mmc: Fix ro switch
  pcm038: Add SPI/MC13783 support
  mx25: Add missing copyright / license header
  mx25pdk: remove nand support as it is not present in current tree
  ...

Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  futex: Move drop_futex_key_refs out of spinlock'ed region
  rcu: Fix TREE_PREEMPT_RCU CPU_HOTPLUG bad-luck hang
  rcu: Stopgap fix for synchronize_rcu_expedited() for TREE_PREEMPT_RCU
  rcu: Prevent RCU IPI storms in presence of high call_rcu() load
  futex: Check for NULL keys in match_futex
  futex: Handle spurious wake up

Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf timechart: Improve the visual appearance of scheduler delays
  perf timechart: Fix the wakeup-arrows that point to non-visible processes
  perf top: Fix --delay_secs 0 division by zero
  perf tools: Bump version to 0.0.2
  perf_event: Adjust frequency and unthrottle for non-group-leader events

Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Do less agressive buddy clearing
  sched: Disable SD_PREFER_LOCAL for MC/CPU domains

Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, UV: Set DELIVERY_MODE=4 for vector=NMI_VECTOR in uv_hub_send_ipi()
  x86, UV: Fix and clean up bau code to use uv_gpa_to_pnode()
  x86: Don't print number of MCE banks for every CPU
  x86, UV: Fix information in __uv_hub_info structure
  x86: Document linker script ASSERT() quirk

frv: fix check on unsigned in do_signal()

syscallno is unsigned

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: don't call pte_unmap() against an improper pte

There are some places where we do like:

pte = pte_map();
do {
(do break in some conditions)
} while (pte++, ...);
pte_unmap(pte - 1);

But if the loop breaks at the first loop, pte_unmap() unmaps invalid pte.

This patch is a fix for this problem.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewd-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lis3: add support for the HP HDX 18

I have an HP HDX 18 laptop, and noted that the configuration of the
accelerometer needs to be x_inverted.

Signed-off-by: Ian E. Morgan <penguin.wrangler@gmail.com>
Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lis3: add support for the HP EliteBook 8530w

Correct orientation for  HP EliteBook 8530w.

Reported-by: Jörgen Jonssson <jorgen.jonsson@saitek.se>
Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lis3: better support for hp 6730x

I have learned that the 6730b and 6730s have different accelerometer
orientation, and have modified the driver accordingly (diff attached),
while dropping the wild guess for AMD based 6735 having the same
orientation as Intel based 6730 (this is not true for any other related
series/family, thus is not probable for 673x).

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cpuidle: always return with interrupts enabled

In the case where cpuidle_idle_call() returns before changing state due to
a need_resched(), it was returning with IRQs disabled.

The idle path assumes that the platform specific idle code returns with
interrupts enabled (although this too is undocumented AFAICT) and on ARM
we have a WARN_ON(!(irqs_disabled()) when returning from the idle loop, so
the user-visible effects were only a warning since interrupts were
eventually re-enabled later.

On x86, this same problem exists, but there is no WARN_ON() to detect it.
As on ARM, the interrupts are eventually re-enabled, so I'm not sure of
any actual bugs triggered by this.  It's primarily a
correctness/consistency fix.

This patch ensures IRQs are (re)enabled before returning.

Reported-by: Hemanth V <hemanthv@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Tested-by: Martin Michlmayr <tbm@cyrius.com>
Cc: <stable@kernel.org> [2.6.31.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: version 0.30

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: fix false EXPORT_SYMBOL warning

Ingo reported that the following lines triggered a false warning,

static struct lock_class_key rcu_lock_key;
struct lockdep_map rcu_lock_map =
        STATIC_LOCKDEP_MAP_INIT("rcu_read_lock", &rcu_lock_key);
EXPORT_SYMBOL_GPL(rcu_lock_map);

from kernel/rcutree.c , and the false warning looked like this,

WARNING: EXPORT_SYMBOL(foo); should immediately follow its
function/variable
+EXPORT_SYMBOL_GPL(rcu_lock_map);

We actually should be checking the statement before the EXPORT_* for a
mention of the exported object, and complain where it is not there.

[akpm@linux-foundation.org: coding-style fixes]
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reported-by: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: fix __attribute__ matching

In the following code,

union thread_union init_thread_union
__attribute__((__section__(".data.init_task"))) =
{ INIT_THREAD_INFO(init_task) };

There is a non-conforming declaration. It should really be like the
following,

union thread_union init_thread_union
__attribute__((__section__(".data.init_task"))) = {
INIT_THREAD_INFO(init_task)
};

However, checkpatch doesn't catch this right now because it doesn't
correctly evaluate the "__attribute__".

It is not at all clear that we care what preceeds an assignment style
attribute when we find the open brace.  Relax the test so we do not need
to check the __attribute__.

Reported-by: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: fix false errors due to macro concatenation

The macro concatenation (##) sequence can cause false errors when checking
macro's.  Checkpatch doesn't currently know about the operator.

For example this line,

+  entry = (struct ftrace_raw_##call *)raw_data;                   \

is correct but it produces the following error,

ERROR: need consistent spacing around '*' (ctx:WxB)
+       entry = (struct ftrace_raw_##call *)raw_data;\
                                          ^

The line above doesn't have any spacing problems, and if you remove the
macro concatenation sequence checkpatch doesn't give any errors.

Extend identifier handling to include ## concatenation within the
definition of an identifier.

Reported-by: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: update copyright dates

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: correctly stop scanning at the bottom of a hunk

We are allowing context scanning checks to apply against the first line of
context outside at the end of the hunk.  This can lead to false matches to
patch names leading to various perl warnings.  Correctly stop at the
bottom of the hunk.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: possible types -- prevent illegal modifiers being added

Prevent known non types being detected as modifiers.  Ensure we do not
look at any type which starts with a keyword.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix sparsemem configuration

Currently, sparsemem is only available if EXPERIMENTAL is enabled.
However, it hasn't ever been marked experimental.

It's been about four years since sparsemem was merged, and we have
platforms which depend on it; allow architectures to decide whether
sparsemem should be the default memory model.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

edac: i5100 fix initialization code

Allow csrows to properly initialize when the topology only has active
channels on 2 and 3.  This new check allows proper detection and
initialization in this topology.  Only checking the first mrt that
represented channels 0 and 1 is not sufficient.

I also fixed up the related debug information path.  I can submit as a 2nd
patch if needed.

Signed-off-by: Keith Mannthey <kmannth@us.ibm.com>
Acked-by: Aristeu Rozanski <aris@ruivo.org>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

edac: i5400 fix missing CONFIG_PCI define

When building without CONFIG_PCI the edac_pci_idx variable is unused,
causing a build-time warning.  Wrap the variable in #ifdef CONFIG_PCI,
just like the rest of the PCI support.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

edac: i5400 fix csrow mapping

The i5400 EDAC driver has several bugs with chip-select row computation
which most likely lead to bugs in detailed error reporting.  Attempts to
contact the authors have gone mostly unanswered so I am presenting my diff
here.  I do not subscribe to lkml and would appreciate being kept in the
cc.

The most egregious problem was miscalculating the addresses of MTR
registers after register 0 by assuming they are 32bit rather than 16.
This caused the driver to miss half of the memories.  Most motherboards
tend to have only 8 dimm slots and not 16, so this may not have been
noticed before.

Further, the row calculations multiplied the number of dimms several
times, ultimately ending up with a maximum row of 32.  The chipset only
supports 4 dimms in each of 4 channels, so csrow could not be higher than
4 unless you use a row per-rank with dual-rank dimms.  I opted to
eliminate this behavior as it is confusing to the user and the error
reporting works by slot and not rank.  This gives a much clearer view of
memory by slot and channel in /sys.

Signed-off-by: Jeff Roberson <jroberson@jroberson.net>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysctl: fix false positives when PROC_SYSCTL=n

Having ->procname but not ->proc_handler is valid when PROC_SYSCTL=n,
people use such combination to reduce ifdefs with non-standard handlers.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14408

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reported-by: Peter Teoh <htmldeveloper@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hwmon: enhance the sysfs API for power meters

Augment the documentation of the hwmon sysfs API to accomodate ACPI power
meters and the current desired behavior of power capping hardware drivers.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

twl4030-gpio: remove __devexit markings from remove func

The gpio_twl4030_probe() function calls gpio_twl4030_remove(), and the
former has __devinit, so the latter cannot use __devexit.  Otherwise we
hit the section mismatch warning:

WARNING: drivers/gpio/built-in.o(.devinit.text+0x71a): Section mismatch
in reference from the function _gpio_twl4030_probe() to the function
.devexit.text:_gpio_twl4030_remove()
The function __devinit _gpio_twl4030_probe() references a function
__devexit _gpio_twl4030_remove().
This is often seen when error handling in the init function uses
functionality in the exit path.
The fix is often to remove the __devexit annotation of
_gpio_twl4030_remove() so it may be used outside an exit section.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8250_pci: add IBM Saturn serial card

The IBM Saturn serial card has only one port. Without that fixup,
the kernel thinks it has two, which confuses userland setup and
admin tools as well.

[akpm@linux-foundation.org: fix pci-ids.h layout]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Alan Cox <alan@linux.intel.com>
Cc: Michael Reed <mreed10@us.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

serial: add ADDI-DATA GmbH PCI-Express communication cards in 8250_pci.c and pci_ids.h

Add support for ADDI-DATA GmbH PCI-Express communication cards:

APCIe-7300
APCIe-7420
APCIe-7500
APCIe-7800

Warning: 8250_pci.c depends on pci_ids.h. 8250_pci.c

Signed-off-by: Krauth Julien <Krauth.Julien@addi-data.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

atmel_serial: fix bad BUILD_BUG_ON() usage

is_power_of_2() appears not to be constant enough for BUILD_BUG_ON()
after the latest rework, so replace it with an open-coded test.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Jan Beulich <jbeulich@novell.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Claudio Scordino <claudio@evidence.eu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vmscan: order evictable rescue in LRU putback

Isolators putting a page back to the LRU do not hold the page lock, and if
the page is mlocked, another thread might munlock it concurrently.

Expecting this, the putback code re-checks the evictability of a page when
it just moved it to the unevictable list in order to correct its decision.

The problem, however, is that ordering is not garuanteed between setting
PG_lru when moving the page to the list and checking PG_mlocked
afterwards:

#0: #1

spin_lock()
if (TestClearPageMlocked())
  if (PageLRU())
    move to evictable list
SetPageLRU()
spin_unlock()
if (!PageMlocked())
  move to evictable list

The PageMlocked() check may get reordered before SetPageLRU() in #0,
resulting in #0 not moving the still mlocked page, and in #1 failing to
isolate and move the page as well.  The page is now stranded on the
unevictable list.

The race condition is very unlikely.  The consequence currently is one
page falling off the reclaim grid and eventually getting freed with
PG_unevictable set, which triggers a warning in the page allocator.

TestClearPageMlocked() in #1 already provides full memory barrier
semantics.

This patch adds an explicit full barrier to force ordering between
SetPageLRU() and PageMlocked() so that either one of the competitors
rescues the page.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

do_mbind(): fix memory leak

If migrate_prep is failed, new variable is leaked.  This patch fixes it.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mbind(): fix leak of never putback pages

If mbind() receives an invalid address, do_mbind leaks a page.  The
following test program detects this leak.

This patch fixes it.

migrate_efault.c
=======================================
 #include <numaif.h>
 #include <numa.h>
 #include <sys/mman.h>
 #include <stdio.h>
 #include <unistd.h>
 #include <stdlib.h>
 #include <string.h>

static unsigned long pagesize;

static void* make_hole_mapping(void)
{

void* addr;

addr = mmap(NULL, pagesize*3, PROT_READ|PROT_WRITE,
    MAP_ANON|MAP_PRIVATE, 0, 0);
if (addr == MAP_FAILED)
return NULL;

/* make page populate */
memset(addr, 0, pagesize*3);

/* make memory hole */
munmap(addr+pagesize, pagesize);

return addr;
}

int main(int argc, char** argv)
{
void* addr;
int ch;
int node;
struct bitmask *nmask = numa_allocate_nodemask();
int err;
int node_set = 0;

while ((ch = getopt(argc, argv, "n:")) != -1){
switch (ch){
case 'n':
node = strtol(optarg, NULL, 0);
numa_bitmask_setbit(nmask, node);
node_set = 1;
break;
default:
;
}
}
argc -= optind;
argv += optind;

if (!node_set)
numa_bitmask_setbit(nmask, 0);

pagesize = getpagesize();

addr = make_hole_mapping();

err = mbind(addr, pagesize*3, MPOL_BIND, nmask->maskp, nmask->size, MPOL_MF_MOVE_ALL);
if (err)
perror("mbind ");

return 0;
}
=======================================

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hfs: fix oops on mount with corrupted btree extent records

A particular fsfuzzer run caused an hfs file system to crash on mount.
This is due to a corrupted MDB extent record causing a miscalculation of
HFS_I(inode)->first_blocks for the extent tree.  If the extent records are
zereod out, it won't trigger the first_blocks special case.  Instead it
falls through to the extent code which we're still in the middle of
initializing.

This patch catches the 0 size extent records, reports the corruption, and
fails the mount.

Reported-by: Ramon de Carvalho Valle <rcvalle@linux.vnet.ibm.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

loop: fix NULL dereference if mount fails

Commit bb21488482bd36eae6b30b014d93619063773fd4 ("[PATCH] switch loop")
started to pass NULL bdev to ioctl hook.

Steps to reproduce:

[boot with loop.max_part=1]
[mount -o loop something so mount fails]

BUG: unable to handle kernel NULL pointer dereference at 00000000000000b8
IP: [<ffffffff811486ee>] blkdev_ioctl+0x2e/0xa30
PGD 0
Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
last sysfs file: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/ACPI0003:00/power_supply/ACAD/online
CPU 0
Modules linked in: zfs nvidia(P) [last unloaded: zfs]
Pid: 15177, comm: mount Tainted: P           2.6.32-rc4-zfs #2 Satellite X200
RIP: 0010:[<ffffffff811486ee>]  [<ffffffff811486ee>] blkdev_ioctl+0x2e/0xa30
RSP: 0018:ffff88003b3d5bb8  EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 000000000000125f RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff88003b3d5ce8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 00007ffffffff000
R13: 0000000000000000 R14: ffff880071cef280 R15: 00000000000200da
FS:  00007fd77cfe7740(0000) GS:ffff880001600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000000000b8 CR3: 0000000001001000 CR4: 00000000000026f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process mount (pid: 15177, threadinfo ffff88003b3d4000, task ffff88007572f920)
Stack:
 ffff88003b3d5c38 ffffffff812f95f5 ffff88007eeb6600 0000000000000000
<0> 0000000000000000 ffff88003b3d5c18 ffffffff811547d9 ffff88001bf11ef0
<0> 7fffffffffffffff ffff88001bf11ee8 ffff88001bf11ef0 0000000000000000
Call Trace:
 [<ffffffff812f95f5>] ? schedule_timeout+0x1f5/0x250
 [<ffffffff811547d9>] ? rb_insert_color+0x109/0x140
 [<ffffffff812fb754>] ? _spin_unlock_irq+0x14/0x40
 [<ffffffff812f84c6>] ? wait_for_common+0x66/0x170
 [<ffffffff8105a280>] ? default_wake_function+0x0/0x10
 [<ffffffff810f8258>] ioctl_by_bdev+0x38/0x50
 [<ffffffff811d2481>] loop_clr_fd+0x1e1/0x210
 [<ffffffff811d2522>] lo_release+0x72/0x80
 [<ffffffff810f934c>] __blkdev_put+0x1ac/0x1d0
 [<ffffffff810f937b>] blkdev_put+0xb/0x10
 [<ffffffff810f93b9>] blkdev_close+0x39/0x60
 [<ffffffff810ccef3>] __fput+0xd3/0x230
 [<ffffffff810cd06d>] fput+0x1d/0x30
 [<ffffffff810c9680>] filp_close+0x50/0x80
 [<ffffffff81061f11>] put_files_struct+0x81/0x100
 [<ffffffff81061fde>] exit_files+0x4e/0x60
 [<ffffffff81063ec5>] do_exit+0x6b5/0x730
 [<ffffffff8107b279>] ? up_read+0x9/0x10
 [<ffffffff8104c86e>] ? do_page_fault+0x18e/0x2a0
 [<ffffffff81063f81>] do_group_exit+0x41/0xc0
 [<ffffffff81064012>] sys_exit_group+0x12/0x20
 [<ffffffff81030deb>] system_call_fastpath+0x16/0x1b
Code: f8 48 89 e5 48 81 ec 30 01 00 00 48 89 5d d8 4c 89 6d e8 4c 89 65 e0 4c 89 75 f0 4c 89 7d f8 48 89 bd e8 fe ff ff 49 89 cd 89 f3 <49> 8b 88 b8 00 00 00 81 fa 68 12 00 00 0f 84 57 05 00 00 0f 86
RIP  [<ffffffff811486ee>] blkdev_ioctl+0x2e/0xa30
 RSP <ffff88003b3d5bb8>
CR2: 00000000000000b8
---[ end trace c0b4d3c3118d1427 ]---
Fixing recursive fault but reboot is needed!

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vmscan: limit VM_EXEC protection to file pages

It is possible to have !Anon but SwapBacked pages, and some apps could
create huge number of such pages with MAP_SHARED|MAP_ANONYMOUS.  These
pages go into the ANON lru list, and hence shall not be protected: we only
care mapped executable files.  Failing to do so may trigger OOM.

Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

revert "mm: oom analysis: add buffer cache information to show_free_areas()"

Revert

    commit 71de1ccbe1fb40203edd3beb473f8580d917d2ca
    Author:     KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
    AuthorDate: Mon Sep 21 17:01:31 2009 -0700
    Commit:     Linus Torvalds <torvalds@linux-foundation.org>
    CommitDate: Tue Sep 22 07:17:27 2009 -0700

        mm: oom analysis: add buffer cache information to show_free_areas()

show_free_areas() is called during page allocation failures, and page
allocation failures can occur in any calling context.

But nr_blockdev_pages() takes VFS locks which should not be taken from
hard IRQ context (at least).  The result is lockdep warnings (and
deadlockability) during page allocation failures.

Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hfsplus: refuse to mount volumes larger than 2TB

As found in <http://bugs.debian.org/550010>, hfsplus is using type u32
rather than sector_t for some sector number calculations.

In particular, hfsplus_get_block() does:

        u32 ablock, dblock, mask;
...
        map_bh(bh_result, sb, (dblock << HFSPLUS_SB(sb).fs_shift) + HFSPLUS_SB(sb).blockoffset + (iblock & mask));

I am not confident that I can find and fix all cases where a sector number
may be truncated.  For now, avoid data loss by refusing to mount HFS+
volumes with more than 2^32 sectors (2TB).

[akpm@linux-foundation.org: fix 32 and 64-bit issues]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Eric Sesterhenn <snakebyte@gmx.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: rt2x00 list is moderated

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add Open Firmware / Flattened Device Tree entry

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: document new "K:" entry type

K: is for keyword.  Syntax is perl extended regex.

Reorganized header documentation and indent the section entry descriptions
so that the first K: would not be considered a regex to match by
get_maintainer.pl

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/get_maintainer.pl: add patch/file search for keywords

Based on an idea from Wolfram Sang.

Add search for MAINTAINERS line "K:" regex pattern match in a patch or file
Matches are added after file pattern matches
Add --keywords command line switch (default 1, on)
Change version to 0.21

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update WOLFSON MICROELECTRONICS

Integrate P:/M: lines
Remove L: linux-kernel@vger.kernel.org

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: fix up PERIPHERAL spelling

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Li Yang <leoli@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: WINBOND CIR - Integrate P:/M: lines, fixup David Härdeman's name

Signed-off-by: Joe Perches <joe@perches.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: SIMPLE FIRMWARE INTERFACE: update email style

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update SCORE architecture name style and add file pattern

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update Kernel Janitors after mismerge

Fix the mismerge of the W: URL and the S: status fields.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: use tab not spaces after field types

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: change ATM mailing list to moderated

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update OMAP Tony Lindgren email name

Which had an embedded and duplicated email address

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update TRACING section

Move to alphabetic position
Use single line F: entries

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update GENERIC UIO FOR PCI DEVICES

Quote a name with a period
remove L: linux-kernel@vger.kernel.org

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omap_hsmmc: add missing probe handler hook

The missing probe handler hook will never probe the driver. Add it back.
Fixes broken MMC on OMAP.

We use platform_driver_probe() API since omap_hsmmc is not a hot-pluggable
device.

Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Tested-by: Felipe Contreras <felipe.contreras@gmail.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Felipe Contreras <felipe.contreras@gmail.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: Greg KH <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

strstrip(): mark as as must_check

strstrip() can return a modified value of its input argument, when
removing elading whitesapce.  So it is surely bug for this function's
return value to be ignored.  The caller is probably going to use the
incorrect original pointer.

So mark it __must_check to prevent this frm happening (as it has before).

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cgroup: fix strstrip() misuse

cgroup_write_X64() and cgroup_write_string() ignore the return value of
strstrip().  it makes small inconsistent behavior.

example:
=========================
 # cd /mnt/cgroup/hoge
 # cat memory.swappiness
 60
 # echo "59 " > memory.swappiness
 # cat memory.swappiness
 59
 # echo " 58" > memory.swappiness
 bash: echo: write error: Invalid argument

This patch fixes it.

Cc: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

congestion_wait(): don't use WRITE

commit 8aa7e847d (Fix congestion_wait() sync/async vs read/write
confusion) replace WRITE with BLK_RW_ASYNC.  Unfortunately, concurrent mm
development made the unchanged place accidentally.

This patch fixes it too.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

connector: fix regression introduced by sid connector

Since commit 02b51df1b07b4e9ca823c89284e704cadb323cd1 (proc connector: add
event for process becoming session leader) we have the following warning:

Badness at kernel/softirq.c:143
[...]
Krnl PSW : 0404c00180000000 00000000001481d4 (local_bh_enable+0xb0/0xe0)
[...]
Call Trace:
([<000000013fe04100>] 0x13fe04100)
 [<000000000048a946>] sk_filter+0x9a/0xd0
 [<000000000049d938>] netlink_broadcast+0x2c0/0x53c
 [<00000000003ba9ae>] cn_netlink_send+0x272/0x2b0
 [<00000000003baef0>] proc_sid_connector+0xc4/0xd4
 [<0000000000142604>] __set_special_pids+0x58/0x90
 [<0000000000159938>] sys_setsid+0xb4/0xd8
 [<00000000001187fe>] sysc_noemu+0x10/0x16
 [<00000041616cb266>] 0x41616cb266

The warning is
--->    WARN_ON_ONCE(in_irq() || irqs_disabled());

The network code must not be called with disabled interrupts but
sys_setsid holds the tasklist_lock with spinlock_irq while calling the
connector.

After a discussion we agreed that we can move proc_sid_connector from
__set_special_pids to sys_setsid.

We also agreed that it is sufficient to change the check from
task_session(curr) != pid into err > 0, since if we don't change the
session, this means we were already the leader and return -EPERM.

One last thing:
There is also daemonize(), and some people might want to get a
notification in that case. Since daemonize() is only needed if a user
space does kernel_thread this does not look important (and there seems
to be no consensus if this connector should be called in daemonize). If
we really want this, we can add proc_sid_connector to daemonize() in an
additional patch (Scott?)

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Scott James Remnant <scott@ubuntu.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hwpoison: fix/proc/meminfo alignment

Given such a long name, the kB count in /proc/meminfo's HardwareCorrupted
line is being shown too far right (it does align with x86_64's VmallocChunk
above, but I hope nobody will ever have that much corrupted!).  Align it.

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hwpoison: fix oops on ksm pages

Memory failure on a KSM page currently oopses on its NULL anon_vma in
page_lock_anon_vma(): that may not be much worse than the consequence of
ignoring it, but it is better to be consistent with how ZERO_PAGE and
hugetlb pages and other awkward cases are treated.  Just skip it.

We could fix it for 2.6.32 at the KSM end, by putting a dummy anon_vma
pointer in there; but that would get harder next time, when KSM will put a
pointer to something else there (and I'm not currently planning to do any
work to open that up to memory_failure).  So I would prefer this simple
PageKsm test, until the other exceptions are handled.

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cpufreq: add cpufreq_get() stub for CONFIG_CPU_FREQ=n

When CONFIG_CPU_FREQ is disabled, cpufreq_get() needs a stub.  Used by kvm
(although it looks like a bit of the kvm code could be omitted when
CONFIG_CPU_FREQ is disabled).

arch/x86/built-in.o: In function `kvm_arch_init':
(.text+0x10de7): undefined reference to `cpufreq_get'

(Needed in linux-next's KVM tree, but it's correct in 2.6.32).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Tested-by: Eric Paris <eparis@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge commit 'gcl/merge' into merge

powerpc/ppc64: Use preempt_schedule_irq instead of preempt_schedule

Based on an original patch by Valentine Barshak <vbarshak@ru.mvista.com>

Use preempt_schedule_irq to prevent infinite irq-entry and
eventual stack overflow problems with fast-paced IRQ sources.

This kind of problems has been observed on the PASemi Electra IDE
controller. We have to make sure we are soft-disabled before calling
preempt_schedule_irq and hard disable interrupts after that
to avoid unrecoverable exceptions.

This patch also moves the "clrrdi r9,r1,THREAD_SHIFT" out of
the #ifdef CONFIG_PPC_BOOK3E scope, since r9 is clobbered
and has to be restored in both cases.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Minor cleanup to lib/Kconfig.debug

We don't need an explicit PPC64 in the DEBUG_PREEMPT dependancies as all
PPC platforms now support TRACE_IRQFLAGS_SUPPORT.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Minor cleanup to sound/ppc/Kconfig

We can replace PPC32 || PPC64 as a dependancy with just PPC as all
powerpc platforms (32-bit and 64-bit) define PPC now.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Minor cleanup to init/Kconfig

We dont need to depend on PPC64 explicitly as all powerpc platforms
(32-bit and 64-bit) define PPC now.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Limit memory hotplug support to PPC64 Book-3S machines

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Limit hugetlbfs support to PPC64 Book-3S machines

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Fix compile errors found by new ppc64e_defconfig

Fix the following 3 issues:

arch/powerpc/kernel/process.c: In function 'arch_randomize_brk':
arch/powerpc/kernel/process.c:1183: error: 'mmu_highuser_ssize' undeclared (first use in this function)
arch/powerpc/kernel/process.c:1183: error: (Each undeclared identifier is reported only once
arch/powerpc/kernel/process.c:1183: error: for each function it appears in.)
arch/powerpc/kernel/process.c:1183: error: 'MMU_SEGSIZE_1T' undeclared (first use in this function)

In file included from arch/powerpc/kernel/setup_64.c:60:
arch/powerpc/include/asm/mmu-hash64.h:132: error: redefinition of 'struct mmu_psize_def'
arch/powerpc/include/asm/mmu-hash64.h:159: error: expected identifier or '(' before numeric constant
arch/powerpc/include/asm/mmu-hash64.h:396: error: conflicting types for 'mm_context_t'
arch/powerpc/include/asm/mmu-book3e.h:184: error: previous declaration of 'mm_context_t' was here

cc1: warnings being treated as errors
arch/powerpc/kernel/pci_64.c: In function 'pcibios_unmap_io_space':
arch/powerpc/kernel/pci_64.c:100: error: unused variable 'res'

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Add a Book-3E 64-bit defconfig

This defconfig's purpose at this time is to help catch compile errors
between Book-3S and Book-3E support in ppc64.  It is based on the
ppc64_defconfig with some things disabled that we dont support on
Book-3E right now (hugetlbfs, slices, etc.)

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/booke: Fix xmon single step on PowerPC Book-E

Prior to the arch/ppc -> arch/powerpc transition, xmon had support for single
stepping on 4xx boards.  The functionality was lost when arch/ppc was removed.
This patch restores single step support for 44x boards, and Book-E in general.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Align vDSO base address

The ABI specifies a 64K alignment, we need to map the vDSO accordingly

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Fix segment mapping in vdso32

Due to missing segment assignments the .text section was put in the NOTES
segment (and marked as NOTE section), and the .got was put in the DYNAMIC
segment.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/iseries: Remove compiler version dependent hack

The creation of the flattened device tree depended on the compiler
putting the constant strings for an object in a section with a
particular name.  This was changed with recent compilers.  Do this
explicitly instead.

Without this patch, iseries kernels may silently not boot when built with
some compilers.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/perf_events: Fix priority of MSR HV vs PR bits

The architecture defines that if MSR PR is set we are in problem state
irrespective of the HV bit.  This fixes perf events to reflect this.

Also, on bare metal systems, samples taken in Linux will now be reported
as kernel rather than hypervisor.

Signed-off-by: Michael Neuling <mikey@neuling.org>
CC: paulus@samba.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

mfd: Do not dereference null pointer in twl4030 error path

We are mistakenly dereferencing twl->client in the twl->client null checking
path.

Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Always initialise WM831x IRQ mutex

This avoids crashes when running without interrupt support.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

pcmcia: do not load the pd6729 driver if io_base is NULL

The CL-PD6729 chip in some docking station is not initialized properly
under Linux. In that case, do not load the pd6729 driver.

[Dominik Brodowski <linux@dominikbrodowski.net>: spelling fixes, check for NULL not 0]
Signed-off-by: Komuro <komurojun-mbn@nifty.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

hwmon: (it87) Fix VID reading on IT8718F/IT8720F

Comparing apples to bananas doesn't seem right. Consistently use the
chips enum for chip type comparisons, to avoid such bugs in the
future.

The bug has been there since support for the IT8718F was added, so
VID never worked for this chip nor for the similar IT8720F.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

hwmon: (dme1737) No vid attributes for SCH311x

The SCH311x chips do not have VID inputs, so the cpu0_vid and vrm
attributes shouldn't be created for them.

This fixes lm-sensors ticket #2353:
http://www.lm-sensors.org/ticket/2353

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Udo van den Heuvel <udovdh@xs4all.nl>
Cc: Juerg Haefliger <juergh@gmail.com>

hwmon: (fschmd) Fix check on unsigned in watchdog_write()

If unsigned the watchdog_trigger() return value will not be
checked correctly.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

hwmon: (coretemp) Maintainer update

Intel will help maintaining the coretemp driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

omap4: Fix UART4 platform data on omap4

This patch removes the unnecessary UART4 platform which is under
data is wrong because of this

There is a separate platform structure for UART4

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-By: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

omap4: Allow omap_serial_early_init() for OMAP4430 board

This patch enables omap_serial_early_init() function for OMAP4430
SDP. Without this the bootup would throw oops in omap_serial_init().

Note that the ifndef CONFIG_ARCH_OMAP4 is split into two sections
to enable omap_serial_early_init(). This ifndef cannot be removed
until omap4 clock framework is implemented.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-By: Tony Lindgren <tony@atomide.com>
Reviewed-By: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

omap3: PM: enable UART3 module wakeups

UART3 is in the PER powerdomain.  If PER goes idle/inactive
independently of CORE, for UART3 to wakeup it must have its wakeup
enable bits setup in PM_WKEN_PER.  This patch enables these bits.

The reason it works when PER and CORE work together is because when
CORE goes inactive/retention, the IOPAD wakeups are enabled and
trigger UART3 wakeup.

Without this patch, when the UART inactivity timer fires for UART3,
its clocks are disabled and it's unable to wakeup so will be unusable
until PER is awoken by another source.

Another way of testing is by keeping CORE on during suspend but
allowing PER to hit retention

  # echo 3 > /debug/pm_debug/core_pwrdm/suspend

then enter suspend

  # echo mem > /sys/power/state

Without this patch, UART3 will be unable to wakeup the system.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

omap2: Fix console serial port number for n8x0

With the recent changes omap serial ports match the physical
numbering like they should. Fix the kernel CMDLINE accordingly
so console works.

Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge git://git./linux/kernel/git/rusty/linux-2.6-for-linus

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  move virtrng_remove to .devexit.text
  move virtballoon_remove to .devexit.text
  virtio_blk: Revert serial number support
  virtio: let header files include virtio_ids.h
  virtio_blk: revert QUEUE_FLAG_VIRT addition

Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)
  niu: VLAN_ETH_HLEN should be used to make sure that the whole MAC header was copied to the head buffer in the Vlan packets case
  KS8851: Fix ks8851_set_rx_mode() for IFF_MULTICAST
  KS8851: Fix MAC address write order
  KS8851: Add soft reset at probe time
  net: fix section mismatch in fec.c
  net: Fix struct inet_timewait_sock bitfield annotation
  tcp: Try to catch MSG_PEEK bug
  net: Fix IP_MULTICAST_IF
  bluetooth: static lock key fix
  bluetooth: scheduling while atomic bug fix
  tcp: fix TCP_DEFER_ACCEPT retrans calculation
  tcp: reduce SYN-ACK retrans for TCP_DEFER_ACCEPT
  tcp: accept socket after TCP_DEFER_ACCEPT period
  Revert "tcp: fix tcp_defer_accept to consider the timeout"
  AF_UNIX: Fix deadlock on connecting to shutdown socket
  ethoc: clear only pending irqs
  ethoc: inline regs access
  vmxnet3: use dev_dbg, fix build for CONFIG_BLOCK=n
  virtio_net: use dev_kfree_skb_any() in free_old_xmit_skbs()
  be2net: fix support for PCI hot plug
  ...

omap2: Fix detection of n8x0

Otherwise the machine_is_nokia_n8*() does not work.

Signed-off-by: Tony Lindgren <tony@atomide.com>

omap1: Fix DSP public peripherals support for ams-delta

DSP public peripherals used to work on OMAP1510 based (or all OMAP1 class?)
machines as long as old dspgateway code were present in the l-o tree. For
several months it is no longer included, breaking support for McBSP1 based
audio on Amstrad Delta, for example.

This patch, derived from the old dspgateway code, corrects the problem for the
board by simply taking the DSP out of reset state, I guess. That way, things
should not break when a new dsp code is added to the tree, and the change can
be reverted then.

If there are any reports on McBSP1 or other DSP public peripherals not working
for other OMAP1 machines (I've not heard of any for now), I can prepare a more
general patch providing an extra include file with a helper function defined.

Created and tested against linux-2.6.32-rc5

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>

omap1: Fix redundant UARTs pin muxing that can break other hardware support

Commit 15ac408ee5a509053a765b816e9179515329369f removed enabled_uart
and OMAP_TAG_UART. This works for mach-omap2, but causes issues on
mach-omap1 for some boards as the mach-omap1 serial.c was muxing
pins based on the enabled_uart flag for 15xx.

Fix this by muxing pins in board-*.c files for the 15xx boards for
the uart ports that had enabled_uart flag set before the commit
above.

Tested on Amsdtrad Delta only.

Note that in the future we should add support for powering down
the uarts with a timer like mach-omap2/serial.c does. Otherwise
the enabled uarts will be blocking retention-while-idle.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>