Heiko Schocher [Wed, 23 Jul 2008 05:30:46 +0000 (07:30 +0200)]
Fix warnings if compiling with IDE support.
cmd_ide.c:827: Warnung: weak declaration of `ide_outb' after first use results in unspecified behavior
cmd_ide.c:839: Warnung: weak declaration of `ide_inb' after first use results in unspecified behavior
Signed-off-by: Heiko Schocher <hs@denx.de>
Adrian Filipi [Tue, 22 Jul 2008 18:28:11 +0000 (14:28 -0400)]
Removed support for the adsvix board.
Support for the adsvix was originally provided by Applied Data
Systems (ADS), inc., now EuroTech, Inc.
The board never shipped aside from some sample boards.
Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
Remy Bohmer [Tue, 22 Jul 2008 14:22:11 +0000 (16:22 +0200)]
ARM: set GD_FLG_RELOC for boards skipping relocation to RAM
If CONFIG_SKIP_RELOCATE_UBOOT is set the flag GD_FLG_RELOC is usually
never set, because relocation to RAM is actually never done by U-boot
itself. However, several pieces of code check if this flag is set at
some time.
So, to make sure this flag is set on boards skipping relocation, this
is added to the initialisation of U-boot at a moment where it is safe
to do so.
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Timur Tabi [Mon, 21 Jul 2008 19:26:23 +0000 (14:26 -0500)]
fsl-i2c: fix writes to data segment before relocation
Prevent i2c_init() in fsl_i2c.c from writing to the data segment before
relocation. Commit
d8c82db4 added the ability for i2c_init() to program the
I2C bus speed and save the value in i2c_bus_speed[], which is a global
variable. It is an error to write to the data segment before relocation,
which is what i2c_init() does when it stores the bus speed in i2c_bus_speed[].
Signed-off-by: Timur Tabi <timur@freescale.com>
Michal Simek [Thu, 17 Jul 2008 10:25:46 +0000 (12:25 +0200)]
microblaze: Fix printf() format issues
Signed-off-by: Michal Simek <monstr@monstr.eu>
Gururaja Hebbar K R [Thu, 17 Jul 2008 01:57:51 +0000 (07:27 +0530)]
Remove unused code from lib_arm/bootm.c
Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
Detlev Zundel [Wed, 16 Jul 2008 16:56:45 +0000 (18:56 +0200)]
tqm85xx: Demystify 'DK: !!!' comment
Signed-off-by: Detlev Zundel <dzu@denx.de>
Detlev Zundel [Wed, 16 Jul 2008 16:56:44 +0000 (18:56 +0200)]
83xx/85xx/86xx: Add LTEDR local bus definitions
Signed-off-by: Detlev Zundel <dzu@denx.de>
Ricardo Ribalda Delgado [Wed, 16 Jul 2008 14:22:32 +0000 (16:22 +0200)]
serial_xuartlite.c: fix compiler warnings
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Stefan Roese [Fri, 18 Jul 2008 09:03:35 +0000 (11:03 +0200)]
POST: Add disable interrupts in some of the missing CPU POST tests
Some CPU POST tests did not disable the interrupts while running. This
seems to be necessary to protect this self modifying code.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 18 Jul 2008 08:43:24 +0000 (10:43 +0200)]
ide: Use CFG_64BIT_LBA instead of CFG_64BIT_STRTOUL
This is needed for boards that define CFG_64BIT_STRTOUL but don't define
CFG_64BIT_LBA.
Signed-off-by: Stefan Roese <sr@denx.de>
Niklaus Giger [Fri, 18 Jul 2008 09:22:23 +0000 (11:22 +0200)]
POST PPC4xx/spr IVPR only if PPC440
The SPR IVPR register is only present (as far as I know) for
processors with a PPC440 core.
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
Acked-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Sun, 20 Jul 2008 20:55:32 +0000 (22:55 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx
Stefan Roese [Fri, 18 Jul 2008 08:42:29 +0000 (10:42 +0200)]
ppc4xx: Enable 64bit printf format on 440/460 platforms
This patch defines CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL for all
440/460 platforms. This may be needed since those platforms support
36bit physical address space.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 18 Jul 2008 13:57:23 +0000 (15:57 +0200)]
ppc4xx: Fix incorrect MODTx setup for some DIMM configurations
This patch fixes a problem with incorrect MODTx (On Die Termination)
setup for a configuration with multiple DIMM's and multiple ranks.
Without this change Katmai was unable to boot Linux with DDR2 frequency
>= 533MHz and mem>=3GB. With this patch Katmai successfully boots Linux
with DDR2 frequency = 640MHz and mem=4GB.
Signed-off-by: Stefan Roese <sr@denx.de>
Sebastian Siewior [Wed, 16 Jul 2008 18:04:49 +0000 (20:04 +0200)]
cfi_flash: fix flash on BE machines with CFG_WRITE_SWAPPED_DATA
This got broken by commits
93c56f212c
[cfi_flash: support of long cmd in U-boot.]
That command needs to be in little endian format on BE machines
with CFG_WRITE_SWAPPED_DATA. Without this patch, the command 0xf0
gets saved on stack as 0x00 00 00 f0 and 0x00 gets written into
the cmdbuf in case portwidth = chipwidth = 8bit.
Cc: Alexey Korolev <akorolev@infradead.org>
Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Wolfgang Denk [Tue, 15 Jul 2008 20:22:44 +0000 (22:22 +0200)]
Prepare v1.3.4-rc1: Code cleanup, update CHANGELOG, sort Makefile
Signed-off-by: Wolfgang Denk <wd@denx.de>
Hugo Villeneuve [Tue, 15 Jul 2008 15:23:02 +0000 (11:23 -0400)]
Round the serial port clock divisor value returned by calc_divisor()
Round the serial port clock divisor value returned by
calc_divisor()
Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
Robin Getz [Tue, 15 Jul 2008 19:44:46 +0000 (21:44 +0200)]
Fix DHCP protocol so U-Boot does not respond too early
on the network with it's offered IP number; it should not reply until
after it has received a DHCP ACK message. Also ensures that U-Boot
does it's DHCPREQUEST as broadcast (per RFC 2131).
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Sebastian Siewior [Tue, 15 Jul 2008 11:35:23 +0000 (13:35 +0200)]
cfi_flash: make the command u32 only
This got changed by commit
93c56f212c
[cfi_flash: support of long cmd in U-boot.]
Long is the wrong type because it will behave differently on 64bit
machines in a way that is probably not expected. u32 should be
enough.
Cc: Alexey Korolev <akorolev@infradead.org>
Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Jean-Christophe PLAGNIOL-VILLARD [Mon, 14 Jul 2008 21:48:41 +0000 (23:48 +0200)]
tools/gitignore: update to all generated files
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Wolfgang Denk [Tue, 15 Jul 2008 19:39:43 +0000 (21:39 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxx
Wolfgang Denk [Tue, 15 Jul 2008 19:39:07 +0000 (21:39 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc86xx
Wolfgang Denk [Tue, 15 Jul 2008 19:38:21 +0000 (21:38 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-sh
Wolfgang Denk [Tue, 15 Jul 2008 19:37:23 +0000 (21:37 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Andre Schwarz [Wed, 9 Jul 2008 16:30:44 +0000 (18:30 +0200)]
mpc5xxx: Add MVBC_P board support
The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet
controller (using e1000) and custom Altera Cyclone-II FPGA on PCI.
Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Timur Tabi [Thu, 19 Jun 2008 22:56:11 +0000 (17:56 -0500)]
Update Freescale sys_eeprom.c to handle CCID formats
Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats. The
NXID format replaces the older CCID format, but it's important to support both
since most boards out there still use the CCID format. This change is in
preparation for using one file to handle both formats. This will also unify
EEPROM support for all Freescale 85xx and 86xx boards.
Also update the 86xx board header files to use the standard CFG_I2C_EEPROM_ADDR
instead of ID_EEPROM_ADDR.
Signed-off-by: Timur Tabi <timur@freescale.com>
Nobuhiro Iwamatsu [Fri, 11 Jul 2008 08:22:43 +0000 (17:22 +0900)]
pci: sh: Add pci_skip_dev and pci_print_dev function
Add function of new PCI, pci_skip_dev and pci_print_dev.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Andy Fleming [Tue, 15 Jul 2008 01:29:07 +0000 (20:29 -0500)]
Clean up INIT_RAM options
The L2_INIT_RAM option was unused, and recent changes to the TLB code
meant that the INIT_RAM TLBs weren't being cleared out. In order to reduce
the amount of mapped space attached to nothing, we change things so the TLBs
get cleared.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Andy Fleming [Tue, 15 Jul 2008 01:26:57 +0000 (20:26 -0500)]
Remove fake flash bank from 8544 DS
The fake flash bank was generating errors for anyone who didn't have a
PromJET hooked up to the board. As that constitutes the vast majority of
users, we remove it.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Kumar Gala [Mon, 14 Jul 2008 19:07:03 +0000 (14:07 -0500)]
MPC8544DS: Add ATI Video card support
Add support for using a PCIe ATI Video card on PCIe2.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Mon, 14 Jul 2008 19:07:02 +0000 (14:07 -0500)]
85xx: Add some L1/L2 SPR register definitions
Add new L1/L2 SPRs related to e500mc cache config and control.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Mon, 14 Jul 2008 19:07:01 +0000 (14:07 -0500)]
MPC8544DS: Report board id, board version and fpga version.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Mon, 14 Jul 2008 19:07:00 +0000 (14:07 -0500)]
85xx: Cleanup L2 cache size detection
The L2 size detection code was a bit confusing and we kept having to add
code to it to handle new processors. Change the sense of detection so we
look for the older processors that aren't changing.
Also added support for 1M cache size on 8572.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Paul Gortmaker [Fri, 11 Jul 2008 19:33:08 +0000 (15:33 -0400)]
sbc8560: enable CONFIG_OF_LIBFDT by default
Make the default build for the sbc8560 board be powerpc
capable with libfdt support.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Andy Fleming [Tue, 15 Jul 2008 01:04:40 +0000 (20:04 -0500)]
Fix indentation for default boot environment variables
This was proposed by Paul Gortmaker in response to Wolfgang's comments on
similar #defines in sbc8560.h.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Paul Gortmaker [Fri, 11 Jul 2008 19:33:07 +0000 (15:33 -0400)]
sbc8560: add default fdt values
Add in the default fdt settings and the typical EXTRA_ENV
settings as borrowed from the mpc8560ads. Fix a couple
of stale references to the mpc8560ads dating back to the
original clone/fork.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Paul Gortmaker [Fri, 11 Jul 2008 19:33:06 +0000 (15:33 -0400)]
sbc8560: add in ft_board_setup()
Add in for the sbc8560, the ft_board_setup() routine, based on what is
in use for the Freescale MPC8560ADS board.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Paul Gortmaker [Fri, 11 Jul 2008 19:33:05 +0000 (15:33 -0400)]
sbc8560: define eth0 and eth1 instead of eth1 and eth2
The existing config doesn't define CONFIG_HAS_ETH0, and so the
fdt support doesn't update the zeros in the dtb local-mac with
real data from the u-boot env. Since the existing config is
tailored to just two interfaces, get rid of the ETH2 definitions
at the same time.
Also don't include any end user specific data into the environment
by default -- things like MAC address, network parameters etc. need
to come from the end user.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Paul Gortmaker [Fri, 11 Jul 2008 19:33:04 +0000 (15:33 -0400)]
sbc8560: properly set cs0_bnds for 512MB
The sbc8560 board ships with 512MB of memory installed,
but the current cs0_bnds is hard coded for 256MB. Set the
value based on CFG_SDRAM_SIZE.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Paul Gortmaker [Fri, 11 Jul 2008 19:33:03 +0000 (15:33 -0400)]
sbc8560: proper definitions for TSEC.
The definitions for the TSEC have become out of date. There is no
longer any such options like "CONFIG_MPC85xx_TSEC1" or similar.
Update to match those of other boards, like the MPC8560ADS.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
Paul Gortmaker [Wed, 9 Jul 2008 17:23:05 +0000 (13:23 -0400)]
8xxx-fdt: set ns16550 clock from CFG_NS16550_CLK, not bi_busfreq
Some boards that have external 16550 UARTs don't have a direct
tie between bi_busfreq and the clock used for the UARTs. Boards
that do have such a tie should set CFG_NS16550_CLK to be
get_bus_freq(0) -- which most of them do already.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Andrew Klossner [Wed, 2 Jul 2008 14:03:53 +0000 (07:03 -0700)]
Change the temp map to ROM to align addresses to page size.
With a page size of BOOKE_PAGESZ_16M, both the real and effective
addresses must be multiples of 16MB. The hardware silently truncates
them so the code happens to work. This patch clarifies the situation
by establishing addresses that the hardware doesn't need to truncate.
Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Kim Phillips [Tue, 17 Jun 2008 22:45:22 +0000 (17:45 -0500)]
mpc85xx: use IS_E_PROCESSOR macro
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Kim Phillips [Mon, 16 Jun 2008 20:55:53 +0000 (15:55 -0500)]
fdt: add crypto node handling for MPC8{3, 5}xxE processors
Delete the crypto node if not on an E-processor. If on 8360 or 834x family,
check rev and up-rev crypto node (to SEC rev. 2.4 property values)
if on an 'EA' processor, e.g. MPC8349EA.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Hugo Villeneuve [Fri, 11 Jul 2008 19:10:11 +0000 (15:10 -0400)]
ARM DaVinci: Remove extern phy_t declaration by moving code to proper place
ARM DaVinci: Remove extern phy_t declaration by moving
code to proper place.
Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Hugo Villeneuve [Fri, 11 Jul 2008 19:10:10 +0000 (15:10 -0400)]
ARM DaVinci: Remove duplicate definitions of MACH_TYPE and prototype of i2c_init()
ARM DaVinci: Remove duplicate definitions of MACH_TYPE
and prototype of i2c_init().
Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Kumar Gala [Mon, 14 Jul 2008 19:03:02 +0000 (14:03 -0500)]
Fix some more printf() format problems.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Wolfgang Denk [Mon, 14 Jul 2008 20:38:42 +0000 (22:38 +0200)]
Fix coding style; make code better parsable by external tools
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 14 Jul 2008 19:19:08 +0000 (21:19 +0200)]
cpu/i386/serial.c: Fix syntax errors
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 14 Jul 2008 18:41:35 +0000 (20:41 +0200)]
elppc board: Coding style cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 14 Jul 2008 18:40:22 +0000 (20:40 +0200)]
elppc board: fix syntax error.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 14 Jul 2008 18:38:26 +0000 (20:38 +0200)]
EB+MCF-EV123 board: fix coding style (alingment)
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 14 Jul 2008 18:36:44 +0000 (20:36 +0200)]
EB+MCF-EV123 board: fix syntx error
Signed-off-by: Wolfgang Denk <wd@denx.de>
Andy Fleming [Mon, 7 Jul 2008 23:02:08 +0000 (18:02 -0500)]
Remove LBC_CACHE_BASE from 8544 DS
The 8544 DS doesn't have any cacheable Local Bus memories set up. By mapping
space for some anyway, we were allowing speculative loads into unmapped space,
which would cause an exception (annoying, even if ultimately harmless).
Removing LBC_CACHE_BASE, and using LBC_NONCACHE_BASE for the LBC LAW solves the
problem.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Wolfgang Denk [Mon, 14 Jul 2008 13:19:07 +0000 (15:19 +0200)]
Code cleanup: fix old style assignment ambiguities like "=-" etc.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 14 Jul 2008 13:10:53 +0000 (15:10 +0200)]
AmigaOneG3SE: remove dead and incomplete files
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 14 Jul 2008 13:06:35 +0000 (15:06 +0200)]
Fix printf() format issues with sizeof_t types by using %zu
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Jean-Christophe PLAGNIOL-VILLARD [Mon, 14 Jul 2008 12:11:45 +0000 (14:11 +0200)]
vsprintf: add z and t options
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Wolfgang Denk [Sun, 13 Jul 2008 21:07:35 +0000 (23:07 +0200)]
Fix some more printf() format issues.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 13 Jul 2008 17:51:00 +0000 (19:51 +0200)]
Fix some more printf() format problems.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 13 Jul 2008 17:48:26 +0000 (19:48 +0200)]
ADS5121: Fix (delete) incorrect ads5121_diu_init() prototype
Signed-off-by: Wolfgang Denk <wd@denx.de>
Anatolij Gustschin [Sat, 12 Jul 2008 15:31:36 +0000 (17:31 +0200)]
Fix bug in Lime video driver
We need to wait while drawing engine clears frame
buffer before any further software accesses to frame
buffer will be initiated. Otherwise software drawn
parts could be partially destroyed by the drawing
engine or even GDC chip freeze could occur (as
observed on socrates board).
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 12 Jul 2008 12:36:34 +0000 (14:36 +0200)]
Fix some more printf() format issues.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Michal Simek [Fri, 11 Jul 2008 13:11:57 +0000 (15:11 +0200)]
hwmon: rename CONFIG_DS1722 to CONFIG_DTT_DS1722
Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Stefan Roese <sr@denx.de>
Michal Simek [Fri, 11 Jul 2008 09:50:53 +0000 (11:50 +0200)]
hwmon: Cleaning hwmon devices
Clean Makefile
Move device specific values to driver for better reading
Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Stefan Roese <sr@denx.de>
Michal Simek [Fri, 11 Jul 2008 08:43:13 +0000 (10:43 +0200)]
FIS: repare incorrect return value with ramdisk handling
Microblaze and PowerPC use boot_get_ramdisk for loading
ramdisk to memory with checking return value.
Return 0 means success. Return 1 means failed.
Here is correspond part of code from bootm.c which check
return code.
ret = boot_get_ramdisk (argc, argv, images, IH_ARCH_PPC,
&rd_data_start, &rd_data_end);
if (ret)
goto error;
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Fri, 11 Jul 2008 08:10:32 +0000 (10:10 +0200)]
microblaze: Remove useless ancient headers
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Fri, 11 Jul 2008 08:10:31 +0000 (10:10 +0200)]
microblaze: Clean uartlite driver
Redesign uartlite driver to in_be32 and out_be32 macros
Fix missing header in io.h
Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Marcel Ziswiler [Fri, 11 Jul 2008 00:39:14 +0000 (02:39 +0200)]
Enable passing of ATAGs required by latest Linux kernel.
Hugo Villeneuve [Fri, 11 Jul 2008 14:24:15 +0000 (10:24 -0400)]
Fix integer overflow warning in calc_divisor()
which happened when rounding the serial port clock divisor
Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Marcel Ziswiler [Thu, 10 Jul 2008 23:09:59 +0000 (01:09 +0200)]
Fix build time warnings in function mmc_decode_csd()
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Hugo Villeneuve [Thu, 10 Jul 2008 14:46:33 +0000 (10:46 -0400)]
ARM: Fix for broken compilation when defining CONFIG_CMD_ELF
caused by missing dcache status/enable/disable functions.
Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Stefan Roese [Thu, 10 Jul 2008 11:53:31 +0000 (13:53 +0200)]
ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards
This patch removes some ft_board_setup() functions from some 4xx boards.
This can be done since we now have a default weak implementation for this
in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
implementation like canyonlands need their own version.
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Sun, 13 Jul 2008 12:58:16 +0000 (14:58 +0200)]
Add last known maintainer for orphaned boards; reformat.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Haavard Skinnemoen [Thu, 10 Jul 2008 11:16:04 +0000 (13:16 +0200)]
Remove kharris@nexus-tech.net from MAINTAINERS
Mail to kharris@nexus-tech.net bounces because the user doesn't exist
anymore. You can't be a maintainer without a valid e-mail address, so
move all boards that used to be maintained by Kyle Harris to the
"orphaned" list.
Currently, only PowerPC has a list of orphaned boards, so this patch
creates one for ARM as well.
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Wolfgang Denk [Sun, 13 Jul 2008 12:45:06 +0000 (14:45 +0200)]
Merge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Sun, 13 Jul 2008 12:44:56 +0000 (14:44 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc512x
Wolfgang Denk [Sun, 13 Jul 2008 12:44:12 +0000 (14:44 +0200)]
Merge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Sun, 13 Jul 2008 12:44:04 +0000 (14:44 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-coldfire
Wolfgang Denk [Sun, 13 Jul 2008 12:43:57 +0000 (14:43 +0200)]
Merge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Sun, 13 Jul 2008 12:42:55 +0000 (14:42 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx
Anatolij Gustschin [Wed, 9 Jul 2008 23:15:10 +0000 (01:15 +0200)]
at91: Fix to enable using Teridian MII phy (78Q21x3) with at91sam9260
On the at91sam9260ep development board there is an EEPROM
connected to the TWI interface (PA23, PA24 Peripheral A
multiplexing), so we cannot use these pins as ETX2, ETX3.
This patch configures PA10, PA11 pins for ETX2, ETX3
instead of PA23, PA24 pins.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Manuel Sahm <Manuel.Sahm@feig.de>
Wolfgang Denk [Sun, 13 Jul 2008 12:40:30 +0000 (14:40 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-at91
Kenneth Johansson [Sat, 12 Jul 2008 19:18:34 +0000 (13:18 -0600)]
fix DIU for small screens
The DIU_DIV register is 8 bit not 5 bit. This prevented large DIV values
so it was not possible to set a slow pixel clock and thus prevented
display on small screens.
Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
Acked-by: John Rigby <jrigby@freescale.com>
John Rigby [Fri, 11 Jul 2008 20:44:09 +0000 (14:44 -0600)]
ADS5121 cleanup compile warnings
board/ads5121/iopin.c
Replace bit fields in struct iopin_t with a single
field and intialize it via plain old macros.
This fixes the type pun warnings and makes the code
more readable.
board/ads5121/ads5121.c
Add include iopin.h to ads5121.c for the iopin_initialize
prototype.
Add an extern void ads5121_diu_init(void)
Signed-off-by: John Rigby <jrigby@freescale.com>
Wolfgang Denk [Fri, 11 Jul 2008 20:56:11 +0000 (22:56 +0200)]
Fix some more printf() format issues.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Fri, 11 Jul 2008 20:55:31 +0000 (22:55 +0200)]
Fixed some out-of-tree build issues
Signed-off-by: Wolfgang Denk <wd@denx.de>
TsiChung Liew [Wed, 9 Jul 2008 21:20:23 +0000 (16:20 -0500)]
ColdFire: Fix FB CS not setup properly for Mcf5282
Remove all CFG_CSn_RO in cpu/mcf52x2/cpu_init.c. If
CFG_CSn_RO is defined as 0, the chipselect will not
be assigned.
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
TsiChung Liew [Wed, 9 Jul 2008 20:47:27 +0000 (15:47 -0500)]
ColdFire: Fix incorrect define for mcf5227x and mcf5445x RTC
Rename CONFIG_MCFTMR to CONFIG_MCFRTC to include real time
clock module in cpu/<cf arch>/cpu_init.c
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
TsiChung Liew [Wed, 9 Jul 2008 20:25:01 +0000 (15:25 -0500)]
ColdFire: Fix incorrect board name in MAKEALL for M5253EVBE
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
TsiChung Liew [Wed, 9 Jul 2008 20:21:44 +0000 (15:21 -0500)]
Fix compile error caused by missing timer function
Add #define CONFIG_MCFTMR in EB+MCF-EV123.h configuration file
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
TsiChung Liew [Wed, 9 Jul 2008 20:14:25 +0000 (15:14 -0500)]
Fix compile error caused by incorrect function return type
Rename int mii_init(void) to void mii_init(void)
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
TsiChung Liew [Thu, 19 Jun 2008 00:27:23 +0000 (19:27 -0500)]
ColdFire: Fix power up issue for MCF5235
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
TsiChung Liew [Thu, 19 Jun 2008 00:19:07 +0000 (19:19 -0500)]
ColdFire: Fix compiling error for MCF5275
The compiling error was caused by missing a closed parentheses
in speed.c
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
TsiChung Liew [Thu, 19 Jun 2008 00:14:01 +0000 (19:14 -0500)]
ColdFire: Fix timer issue for MCF5272
The timer was assigned to wrong timer memory mapped which
caused udelay() and timer() not working properly.
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
TsiChung Liew [Thu, 19 Jun 2008 00:12:13 +0000 (19:12 -0500)]
ColdFire: Change invalid JMP to BRA caught by new v4e toolchain
Signed-off-by: Kurt Mahan <kmahan@freescale.com>
TsiChung Liew [Thu, 19 Jun 2008 00:05:23 +0000 (19:05 -0500)]
ColdFire: Add -got=single param for new linux v4e toolchains
Signed-off-by: Kurt Mahan <kmahan@freescale.com>
TsiChung Liew [Wed, 18 Jun 2008 18:21:19 +0000 (13:21 -0500)]
ColdFire: Fix code flash configuration for M547x/M548x boards
Signed-off-by: Kurt Mahan <kmahan@freescale.com>
TsiChung Liew [Tue, 24 Jun 2008 17:12:16 +0000 (12:12 -0500)]
ColdFire: Fix warning messages by passing correct data type in board.c
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
projects / platform / kernel / u-boot.git / log