Input: raspberrypi-ts - fix refcount leak in rpi_ts_probe

[ Upstream commit 5bca3688bdbc3b58a2894b8671a8e2378efe28bd ]

rpi_firmware_get() take reference, we need to release it in error paths
as well. Use devm_rpi_firmware_get() helper to handling the resources.
Also remove the existing rpi_firmware_put().

Fixes: 0b9f28fed3f7 ("Input: add official Raspberry Pi's touchscreen driver")
Fixes: 3b8ddff780b7 ("input: raspberrypi-ts: Release firmware handle when not needed")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20221223074657.810346-1-linmq006@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk

[ Upstream commit 68d1151f03067533827fc50b770954ef33149533 ]

There's only one DSI PHY on this SoC. Remove the ghost entry for the
clock produced by a secondary one.

Fixes: cc517ea3333f ("clk: qcom: Add display clock controller driver for QCM2290")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230412-topic-qcm_dispcc-v1-2-bf2989a75ae4@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: dispcc-qcm2290: get rid of test clock

[ Upstream commit 62db82f9c8004f1226f5cec8a5441fb89eb984fa ]

The test clock apparently it's not used by anyone upstream. Remove it.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221228185237.3111988-9-dmitry.baryshkov@linaro.org
Stable-dep-of: 68d1151f0306 ("clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk")
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling

[ Upstream commit 1a500e0bc97b6cb3c0d9859e81973b8dd07d1b7b ]

On SM8350 platform the PCIe PIPE clocks require additional handling to
function correctly. They are to be switched to the tcxo source before
turning PCIe GDSCs off and should be switched to PHY PIPE source once
they are working. Switch PCIe PHY clocks to use clk_regmap_phy_mux_ops,
which provide support for this dance.

Fixes: 44c20c9ed37f ("clk: qcom: gcc: Add clock driver for SM8350")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230412134829.3686467-1-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc

[ Upstream commit aad09fc7c4a522892eb64a79627b17a3869936cb ]

Add GDSCs in lpass_cc_sc7280_desc struct.
When qcom,adsp-pil-mode is enabled, GDSCs required to solve
dependencies in lpass_audiocc probe().

Fixes: 0cbcfbe50cbf ("clk: qcom: lpass: Handle the regmap overlap of lpasscc and lpass_aon")
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407092255.119690-4-quic_mohs@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration

[ Upstream commit 4fc1c2d9a2b7a394f3b873aae5e03bffd8b5cd31 ]

The qdsp6ss memory region is being shared by ADSP remoteproc device and
lpasscc clock device, hence causing memory conflict.
To avoid this, when qdsp6ss clocks are being enabled in remoteproc driver,
skip qdsp6ss clock registration if "qcom,adsp-pil-mode" is enabled and
also assign max_register value.

Fixes: 4ab43d171181 ("clk: qcom: Add lpass clock controller driver for SC7280")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407092255.119690-3-quic_mohs@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/amd: Set page size bitmap during V2 domain allocation

[ Upstream commit 8f880d19e6ad645a4b8066d5ff091c980b3231e7 ]

With the addition of the V2 page table support, the domain page size
bitmap needs to be set prior to iommu core setting up direct mappings
for reserved regions. When reserved regions are mapped, if this is not
done, it will be looking at the V1 page size bitmap when determining
the page size to use in iommu_pgsize(). When it gets into the actual
amd mapping code, a check of see if the page size is supported can
fail, because at that point it is checking it against the V2 page size
bitmap which only supports 4K, 2M, and 1G.

Add a check to __iommu_domain_alloc() to not override the
bitmap if it was already set by the iommu ops domain_alloc() code path.

Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Joerg Roedel <joro@8bytes.org>
Fixes: 4db6c41f0946 ("iommu/amd: Add support for using AMD IOMMU v2 page table for DMA-API")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20230404072742.1895252-1-jsnitsel@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.1: Always send a RECLAIM_COMPLETE after establishing lease

[ Upstream commit 40882deb83c29d8df4470d4e5e7f137b6acf7ad1 ]

The spec requires that we always at least send a RECLAIM_COMPLETE when
we're done establishing the lease and recovering any state.

Fixes: fce5c838e133 ("nfs41: RECLAIM_COMPLETE functionality")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx: imx8ulp: Fix XBAR_DIVBUS and AD_SLOW clock parents

[ Upstream commit d608c18018c897b88d66f1340fe274b7181817fa ]

XBAR_DIVBUS and AD_SLOW should set parent to XBAR_AD_DIVPLAT and
XBAR_DIVBUS respectively, not the NIC_AD. otherwise we will get
wrong clock rate.

Fixes: c43a801a5789 ("clk: imx: Add clock driver for imx8ulp")
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230331063814.2462059-2-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx: fracn-gppll: disable hardware select control

[ Upstream commit 4435467b15b069e5a6f50ca9a9260e86b74dbc13 ]

When programming PLL, should disable Hardware control select to make PLL
controlled by register, not hardware inputs through OSCPLL.

Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230403095300.3386988-3-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx: fracn-gppll: fix the rate table

[ Upstream commit cf8dccfedce848f67eaa42e8839305d028319161 ]

The Fvco should be range 2.4GHz to 5GHz, the original table voilate the
spec, so update the table to fix it.

Fixes: c196175acdd3 ("clk: imx: clk-fracn-gppll: Add more freq config for video pll")
Fixes: 044034efbeea ("clk: imx: clk-fracn-gppll: fix mfd value")
Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230403095300.3386988-2-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/hfi1: Fix bugs with non-PAGE_SIZE-end multi-iovec user SDMA requests

[ Upstream commit 00cbce5cbf88459cd1aa1d60d0f1df15477df127 ]

hfi1 user SDMA request processing has two bugs that can cause data
corruption for user SDMA requests that have multiple payload iovecs
where an iovec other than the tail iovec does not run up to the page
boundary for the buffer pointed to by that iovec.a

Here are the specific bugs:
1. user_sdma_txadd() does not use struct user_sdma_iovec->iov.iov_len.
   Rather, user_sdma_txadd() will add up to PAGE_SIZE bytes from iovec
   to the packet, even if some of those bytes are past
   iovec->iov.iov_len and are thus not intended to be in the packet.
2. user_sdma_txadd() and user_sdma_send_pkts() fail to advance to the
   next iovec in user_sdma_request->iovs when the current iovec
   is not PAGE_SIZE and does not contain enough data to complete the
   packet. The transmitted packet will contain the wrong data from the
   iovec pages.

This has not been an issue with SDMA packets from hfi1 Verbs or PSM2
because they only produce iovecs that end short of PAGE_SIZE as the tail
iovec of an SDMA request.

Fixing these bugs exposes other bugs with the SDMA pin cache
(struct mmu_rb_handler) that get in way of supporting user SDMA requests
with multiple payload iovecs whose buffers do not end at PAGE_SIZE. So
this commit fixes those issues as well.

Here are the mmu_rb_handler bugs that non-PAGE_SIZE-end multi-iovec
payload user SDMA requests can hit:
1. Overlapping memory ranges in mmu_rb_handler will result in duplicate
   pinnings.
2. When extending an existing mmu_rb_handler entry (struct mmu_rb_node),
   the mmu_rb code (1) removes the existing entry under a lock, (2)
   releases that lock, pins the new pages, (3) then reacquires the lock
   to insert the extended mmu_rb_node.

   If someone else comes in and inserts an overlapping entry between (2)
   and (3), insert in (3) will fail.

   The failure path code in this case unpins _all_ pages in either the
   original mmu_rb_node or the new mmu_rb_node that was inserted between
   (2) and (3).
3. In hfi1_mmu_rb_remove_unless_exact(), mmu_rb_node->refcount is
   incremented outside of mmu_rb_handler->lock. As a result, mmu_rb_node
   could be evicted by another thread that gets mmu_rb_handler->lock and
   checks mmu_rb_node->refcount before mmu_rb_node->refcount is
   incremented.
4. Related to #2 above, SDMA request submission failure path does not
   check mmu_rb_node->refcount before freeing mmu_rb_node object.

   If there are other SDMA requests in progress whose iovecs have
   pointers to the now-freed mmu_rb_node(s), those pointers to the
   now-freed mmu_rb nodes will be dereferenced when those SDMA requests
   complete.

Fixes: 7be85676f1d1 ("IB/hfi1: Don't remove RB entry when not needed.")
Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Signed-off-by: Brendan Cunningham <bcunningham@cornelisnetworks.com>
Signed-off-by: Patrick Kelsey <pat.kelsey@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Link: https://lore.kernel.org/r/168088636445.3027109.10054635277810177889.stgit@252.162.96.66.static.eigbox.net
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/hfi1: Fix SDMA mmu_rb_node not being evicted in LRU order

[ Upstream commit 9fe8fec5e43d5a80f43cbf61aaada1b047a1eb61 ]

hfi1_mmu_rb_remove_unless_exact() did not move mmu_rb_node objects in
mmu_rb_handler->lru_list after getting a cache hit on an mmu_rb_node.

As a result, hfi1_mmu_rb_evict() was not guaranteed to evict truly
least-recently used nodes.

This could be a performance issue for an application when that
application:
- Uses some long-lived buffers frequently.
- Uses a large number of buffers once.
- Hits the mmu_rb_handler cache size or pinned-page limits, forcing
  mmu_rb_handler cache entries to be evicted.

In this case, the one-time use buffers cause the long-lived buffer
entries to eventually filter to the end of the LRU list where
hfi1_mmu_rb_evict() will consider evicting a frequently-used long-lived
entry instead of evicting one of the one-time use entries.

Fix this by inserting new mmu_rb_node at the tail of
mmu_rb_handler->lru_list and move mmu_rb_ndoe to the tail of
mmu_rb_handler->lru_list when the mmu_rb_node is a hit in
hfi1_mmu_rb_remove_unless_exact(). Change hfi1_mmu_rb_evict() to evict
from the head of mmu_rb_handler->lru_list instead of the tail.

Fixes: 0636e9ab8355 ("IB/hfi1: Add cache evict LRU list")
Signed-off-by: Brendan Cunningham <bcunningham@cornelisnetworks.com>
Signed-off-by: Patrick Kelsey <pat.kelsey@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Link: https://lore.kernel.org/r/168088635931.3027109.10423156330761536044.stgit@252.162.96.66.static.eigbox.net
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/srpt: Add a check for valid 'mad_agent' pointer

[ Upstream commit eca5cd9474cd26d62f9756f536e2e656d3f62f3a ]

When unregistering MAD agent, srpt module has a non-null check
for 'mad_agent' pointer before invoking ib_unregister_mad_agent().
This check can pass if 'mad_agent' variable holds an error value.
The 'mad_agent' can have an error value for a short window when
srpt_add_one() and srpt_remove_one() is executed simultaneously.

In srpt module, added a valid pointer check for 'sport->mad_agent'
before unregistering MAD agent.

This issue can hit when RoCE driver unregisters ib_device

Stack Trace:
------------
BUG: kernel NULL pointer dereference, address: 000000000000004d
PGD 145003067 P4D 145003067 PUD 2324fe067 PMD 0
Oops: 0002 [#1] PREEMPT SMP NOPTI
CPU: 10 PID: 4459 Comm: kworker/u80:0 Kdump: loaded Tainted: P
Hardware name: Dell Inc. PowerEdge R640/06NR82, BIOS 2.5.4 01/13/2020
Workqueue: bnxt_re bnxt_re_task [bnxt_re]
RIP: 0010:_raw_spin_lock_irqsave+0x19/0x40
Call Trace:
  ib_unregister_mad_agent+0x46/0x2f0 [ib_core]
  IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
  ? __schedule+0x20b/0x560
  srpt_unregister_mad_agent+0x93/0xd0 [ib_srpt]
  srpt_remove_one+0x20/0x150 [ib_srpt]
  remove_client_context+0x88/0xd0 [ib_core]
  bond0: (slave p2p1): link status definitely up, 100000 Mbps full duplex
  disable_device+0x8a/0x160 [ib_core]
  bond0: active interface up!
  ? kernfs_name_hash+0x12/0x80
 (NULL device *): Bonding Info Received: rdev: 000000006c0b8247
  __ib_unregister_device+0x42/0xb0 [ib_core]
 (NULL device *):         Master: mode: 4 num_slaves:2
  ib_unregister_device+0x22/0x30 [ib_core]
 (NULL device *):         Slave: id: 105069936 name:p2p1 link:0 state:0
  bnxt_re_stopqps_and_ib_uninit+0x83/0x90 [bnxt_re]
  bnxt_re_alloc_lag+0x12e/0x4e0 [bnxt_re]

Fixes: a42d985bd5b2 ("ib_srpt: Initial SRP Target merge for v3.3-rc1")
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Link: https://lore.kernel.org/r/20230406042549.507328-1-saravanan.vajravel@broadcom.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/cm: Trace icm_send_rej event before the cm state is reset

[ Upstream commit bd9de1badac7e4ff6780365d4aa38983f5e2a436 ]

Trace icm_send_rej event before the cm state is reset to idle, so that
correct cm state will be logged. For example when an incoming request is
rejected, the old trace log was:
    icm_send_rej: local_id=961102742 remote_id=3829151631 state=IDLE reason=REJ_CONSUMER_DEFINED
With this patch:
    icm_send_rej: local_id=312971016 remote_id=3778819983 state=MRA_REQ_SENT reason=REJ_CONSUMER_DEFINED

Fixes: 8dc105befe16 ("RDMA/cm: Add tracepoints to track MAD send operations")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/20230330072351.481200-1-markzhang@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: rk817: Fix low SOC bugs

[ Upstream commit baba1315a74d12772d4940a05d58dc03e6ec0635 ]

When the SOC approaches zero, an integer overflows in the columb
counter causing the driver to react poorly. This makes the driver
think it's at (above) the fully charged capacity when in fact it's
zero. It would then write this full capacity to NVRAM which would be
used on boot if the device remained off for less than 5 hours and
not plugged in.

This can be fixed and guarded against by doing the following:
 - Changing the type of tmp in rk817_read_or_set_full_charge_on_boot()
   to be an int instead of a u32. That way we can account for negative
   numbers.
 - Guard against negative values for the full charge on boot by setting
   the charge to 0 if the system charge reports less than 0.
 - Catch scenarios where the battery voltage is below the design
   minimum voltage and set the system SOC to 0 at that time and update
   the columb counter with a charge level of 0.
 - Change the off time value from 5 hours to 30 minutes before we
   recalculate the current capacity based on the OCV tables.

These changes allow the driver to operate better at low voltage/low
capacity conditions.

Fixes: 3268a4d9b0b8 ("power: supply: rk817: Fix unsigned comparison with less than zero")
Fixes: 11cb8da0189b ("power: supply: Add charger driver for Rockchip RK817")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-sm6115: Mark RCGs shared where applicable

[ Upstream commit 996c32b745a15a637e8244a25f06b74acce98976 ]

The vast majority of shared RCGs were not marked as such. Fix it.

Fixes: cbe63bfdc54f ("clk: qcom: Add Global Clock controller (GCC) driver for SM6115")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230404224719.909746-1-konrad.dybcio@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/siw: Remove namespace check from siw_netdev_event()

[ Upstream commit 266e9b3475ba82212062771fdbc40be0e3c06ec8 ]

syzbot is reporting that siw_netdev_event(NETDEV_UNREGISTER) cannot destroy
siw_device created after unshare(CLONE_NEWNET) due to net namespace check.
It seems that this check was by error there and should be removed.

Reported-by: syzbot <syzbot+5e70d01ee8985ae62a3b@syzkaller.appspotmail.com>
Link: https://syzkaller.appspot.com/bug?extid=5e70d01ee8985ae62a3b
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Suggested-by: Leon Romanovsky <leon@kernel.org>
Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/a44e9ac5-44e2-d575-9e30-02483cc7ffd1@I-love.SAKURA.ne.jp
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: add missing of_node_put() in "assigned-clocks" property parsing

[ Upstream commit 27a6e1b09a782517fddac91259970ac466a3f7b6 ]

When returning from of_parse_phandle_with_args(), the np member of the
of_phandle_args structure should be put after usage. Add missing
of_node_put() calls in both __set_clk_parents() and __set_clk_rates().

Fixes: 86be408bfbd8 ("clk: Support for clock parents and rates assigned from device tree")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Link: https://lore.kernel.org/r/20230131083227.10990-1-clement.leger@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: generic-adc-battery: fix unit scaling

[ Upstream commit 44263f50065969f2344808388bd589740f026167 ]

power-supply properties are reported in µV, µA and µW.
The IIO API provides mV, mA, mW, so the values need to
be multiplied by 1000.

Fixes: e60fea794e6e ("power: battery: Generic battery driver using IIO")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/mediatek: Set dma_mask for PGTABLE_PA_35_EN

[ Upstream commit f045e9df6537175d02565f21616ac1a9dd59b61c ]

When we enable PGTABLE_PA_35_EN, the PA for pgtable may be 35bits.
Thus add dma_mask for it.

Fixes: 301c3ca12576 ("iommu/mediatek: Allow page table PA up to 35bit")
Signed-off-by: Chengci.Xu <chengci.xu@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230316101445.12443-1-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/ntfs3: Fix slab-out-of-bounds read in hdr_delete_de()

[ Upstream commit ab84eee4c7ab929996602eda7832854c35a6dda2 ]

Here is a BUG report from syzbot:

BUG: KASAN: slab-out-of-bounds in hdr_delete_de+0xe0/0x150 fs/ntfs3/index.c:806
Read of size 16842960 at addr ffff888079cc0600 by task syz-executor934/3631

Call Trace:
 memmove+0x25/0x60 mm/kasan/shadow.c:54
 hdr_delete_de+0xe0/0x150 fs/ntfs3/index.c:806
 indx_delete_entry+0x74f/0x3670 fs/ntfs3/index.c:2193
 ni_remove_name+0x27a/0x980 fs/ntfs3/frecord.c:2910
 ntfs_unlink_inode+0x3d4/0x720 fs/ntfs3/inode.c:1712
 ntfs_rename+0x41a/0xcb0 fs/ntfs3/namei.c:276

Before using the meta-data in struct INDEX_HDR, we need to
check index header valid or not. Otherwise, the corruptedi
(or malicious) fs image can cause out-of-bounds access which
could make kernel panic.

Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")
Reported-by: syzbot+9c2811fd56591639ff5f@syzkaller.appspotmail.com
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/ntfs3: Fix OOB read in indx_insert_into_buffer

[ Upstream commit b8c44949044e5f7f864525fdffe8e95135ce9ce5 ]

Syzbot reported a OOB read bug:

BUG: KASAN: slab-out-of-bounds in indx_insert_into_buffer+0xaa3/0x13b0
fs/ntfs3/index.c:1755
Read of size 17168 at addr ffff8880255e06c0 by task syz-executor308/3630

Call Trace:
 <TASK>
 memmove+0x25/0x60 mm/kasan/shadow.c:54
 indx_insert_into_buffer+0xaa3/0x13b0 fs/ntfs3/index.c:1755
 indx_insert_entry+0x446/0x6b0 fs/ntfs3/index.c:1863
 ntfs_create_inode+0x1d3f/0x35c0 fs/ntfs3/inode.c:1548
 ntfs_create+0x3e/0x60 fs/ntfs3/namei.c:100
 lookup_open fs/namei.c:3413 [inline]

If the member struct INDEX_BUFFER *index of struct indx_node is
incorrect, that is, the value of __le32 used is greater than the value
of __le32 total in struct INDEX_HDR. Therefore, OOB read occurs when
memmove is called in indx_insert_into_buffer().
Fix this by adding a check in hdr_find_e().

Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")
Reported-by: syzbot+d882d57193079e379309@syzkaller.appspotmail.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/ntfs3: Add check for kmemdup

[ Upstream commit e6c3cef24cb0d045f99d5cb039b344874e3cfd74 ]

Since the kmemdup may return NULL pointer,
it should be better to add check for the return value
in order to avoid NULL pointer dereference.

Fixes: b46acd6a6a62 ("fs/ntfs3: Add NTFS journal")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/ntfs3: Fix memory leak if ntfs_read_mft failed

[ Upstream commit bfa434c60157c9793e9b12c9b68ade02aff9f803 ]

Label ATTR_ROOT in ntfs_read_mft() sets is_root = true and
ni->ni_flags |= NI_FLAG_DIR, then next attr will goto label ATTR_ALLOC
and alloc ni->dir.alloc_run. However two states are not always
consistent and can make memory leak.

 1) attr_name in ATTR_ROOT does not fit the condition it will set
 is_root = true but NI_FLAG_DIR is not set.
 2) next attr_name in ATTR_ALLOC fits the condition and alloc
 ni->dir.alloc_run
 3) in cleanup function ni_clear(), when NI_FLAG_DIR is set, it frees
 ni->dir.alloc_run, otherwise it frees ni->file.run
 4) because NI_FLAG_DIR is not set in this case, ni->dir.alloc_run is
 leaked as kmemleak reported:

unreferenced object 0xffff888003bc5480 (size 64):
  backtrace:
    [<000000003d42e6b0>] __kmalloc_node+0x4e/0x1c0
    [<00000000d8e19b8a>] kvmalloc_node+0x39/0x1f0
    [<00000000fc3eb5b8>] run_add_entry+0x18a/0xa40 [ntfs3]
    [<0000000011c9f978>] run_unpack+0x75d/0x8e0 [ntfs3]
    [<00000000e7cf1819>] run_unpack_ex+0xbc/0x500 [ntfs3]
    [<00000000bbf0a43d>] ntfs_iget5+0xb25/0x2dd0 [ntfs3]
    [<00000000a6e50693>] ntfs_fill_super+0x218d/0x3580 [ntfs3]
    [<00000000b9170608>] get_tree_bdev+0x3fb/0x710
    [<000000004833798a>] vfs_get_tree+0x8e/0x280
    [<000000006e20b8e6>] path_mount+0xf3c/0x1930
    [<000000007bf15a5f>] do_mount+0xf3/0x110
    ...

Fix this by always setting is_root and NI_FLAG_DIR together.

Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/erdma: Use fixed hardware page size

[ Upstream commit d649c638dc26f3501da510cf7fceb5c15ca54258 ]

Hardware's page size is 4096, but the kernel's page size may vary. Driver
should use hardware's page size when communicating with hardware.

Fixes: 155055771704 ("RDMA/erdma: Add verbs implementation")
Link: https://lore.kernel.org/r/20230307102924.70577-2-chengyou@linux.alibaba.com
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: k3: handle errors while enabling wake irq

[ Upstream commit d31d7300ebc0c43021ec48c0e6a3a427386f4617 ]

Due to the potential failure of enable_irq_wake(), it would be better to
return error if it fails.

Fixes: b09d633575e5 ("rtc: Introduce ti-k3-rtc")
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230323085904.957999-1-d-gole@ti.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: meson-vrtc: Use ktime_get_real_ts64() to get the current time

[ Upstream commit 0e6255fa3f649170da6bd1a544680589cfae1131 ]

The VRTC alarm register can be programmed with an amount of seconds
after which the SoC will be woken up by the VRTC timer again. We are
already converting the alarm time from meson_vrtc_set_alarm() to
"seconds since 1970". This means we also need to use "seconds since
1970" for the current time.

This fixes a problem where setting the alarm to one minute in the future
results in the firmware (which handles wakeup) to output (on the serial
console) that the system will be woken up in billions of seconds.
ktime_get_raw_ts64() returns the time since boot, not since 1970. Switch
to ktime_get_real_ts64() to fix the calculation of the alarm time and to
make the SoC wake up at the specified date/time. Also the firmware
(which manages suspend) now prints either 59 or 60 seconds until wakeup
(depending on how long it takes for the system to enter suspend).

Fixes: 6ef35398e827 ("rtc: Add Amlogic Virtual Wake RTC")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20230320212142.2355062-1-martin.blumenstingl@googlemail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/mlx4: Prevent shift wrapping in set_user_sq_size()

[ Upstream commit d50b3c73f1ac20dabc53dc6e9d64ce9c79a331eb ]

The ucmd->log_sq_bb_count variable is controlled by the user so this
shift can wrap.  Fix it by using check_shl_overflow() in the same way
that it was done in commit 515f60004ed9 ("RDMA/hns: Prevent undefined
behavior in hns_roce_set_user_sq_size()").

Fixes: 839041329fd3 ("IB/mlx4: Sanity check userspace send queue sizes")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/a8dfbd1d-c019-4556-930b-bab1ded73b10@kili.mountain
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: omap: include header for omap_rtc_power_off_program prototype

[ Upstream commit f69c2b5420497b7a54181ce170d682cbeb1f119f ]

Non-static functions should have a prototype:

  drivers/rtc/rtc-omap.c:410:5: error: no previous prototype for ‘omap_rtc_power_off_program’ [-Werror=missing-prototypes]

Fixes: 6256f7f7f217 ("rtc: OMAP: Add support for rtc-only mode")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230311094021.79730-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

workqueue: Fix hung time report of worker pools

[ Upstream commit 335a42ebb0ca8ee9997a1731aaaae6dcd704c113 ]

The workqueue watchdog prints a warning when there is no progress in
a worker pool. Where the progress means that the pool started processing
a pending work item.

Note that it is perfectly fine to process work items much longer.
The progress should be guaranteed by waking up or creating idle
workers.

show_one_worker_pool() prints state of non-idle worker pool. It shows
a delay since the last pool->watchdog_ts.

The timestamp is updated when a first pending work is queued in
__queue_work(). Also it is updated when a work is dequeued for
processing in worker_thread() and rescuer_thread().

The delay is misleading when there is no pending work item. In this
case it shows how long the last work item is being proceed. Show
zero instead. There is no stall if there is no pending work.

Fixes: 82607adcf9cdf40fb7b ("workqueue: implement lockup detector")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-qcm2290: Fix up gcc_sdcc2_apps_clk_src

[ Upstream commit 1bf088a9f0e50acd175ba8deef0db11c099fa26e ]

Add the PARENT_ENABLE flag to prevent  the clock from getting stuck
at boot and use floor_ops to avoid SDHCI overclocking.

Fixes: 496d1a13d405 ("clk: qcom: Add Global Clock Controller driver for QCM2290")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230315173048.3497655-1-konrad.dybcio@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rdmavt: Delete unnecessary NULL check

[ Upstream commit b73a0b80c69de77d8d4942abb37066531c0169b2 ]

There is no need to check 'rdi->qp_dev' for NULL. The field 'qp_dev'
is created in rvt_register_device() which will fail if the 'qp_dev'
allocation fails in rvt_driver_qp_init(). Overwise this pointer
doesn't changed and passed to rvt_qp_exit() by the next step.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 0acb0cc7ecc1 ("IB/rdmavt: Initialize and teardown of qpn table")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Link: https://lore.kernel.org/r/20230303124408.16685-1-n.petrova@fintech.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: mediatek: mt8135: Properly use CLK_IS_CRITICAL flag

[ Upstream commit f4f9a9c003b52ea3cffda186753bfb3e37b970f8 ]

Instead of calling clk_prepare_enable() for clocks that shall stay
enabled, use the CLK_IS_CRITICAL flag, which purpose is exactly that.

Fixes: a8aede794843 ("clk: mediatek: Add basic clocks for Mediatek MT8135.")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230306140543.1813621-52-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: mediatek: mt7622: Properly use CLK_IS_CRITICAL flag

[ Upstream commit fa8c0d01df62130ff596d560380a6f844f62639e ]

Instead of calling clk_prepare_enable() for clocks that shall stay
enabled, use the CLK_IS_CRITICAL flag, which purpose is exactly that.

Fixes: 2fc0a509e4ee ("clk: mediatek: add clock support for MT7622 SoC")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230306140543.1813621-24-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: mediatek: Consistently use GATE_MTK() macro

[ Upstream commit 4c85e20b656607897e3bb06ff565822fa4b4de95 ]

All the various MediaTek clock drivers are, in a way or another,
redefining the GATE_MTK() macro with different names: while some
are doing that by actually using GATE_MTK(), others are copying
it entirely (hence, entirely redefining it).

Change all clock drivers to always and consistently use this macro.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org> # MT8183, MT8192, MT8195 Chromebooks
Link: https://lore.kernel.org/r/20230306140543.1813621-23-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stable-dep-of: fa8c0d01df62 ("clk: mediatek: mt7622: Properly use CLK_IS_CRITICAL flag")
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: mediatek: mt2712: Add error handling to clk_mt2712_apmixed_probe()

[ Upstream commit 20cace1b9d7e33f68f0ee17196bf0df618dbacbe ]

This function was completely missing error handling: add it.

Fixes: e2f744a82d72 ("clk: mediatek: Add MT2712 clock support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230306140543.1813621-8-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/siw: Fix potential page_array out of range access

[ Upstream commit 271bfcfb83a9f77cbae3d6e1a16e3c14132922f0 ]

When seg is equal to MAX_ARRAY, the loop should break, otherwise
it will result in out of range access.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: b9be6f18cf9e ("rdma/siw: transmit path")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Link: https://lore.kernel.org/r/20230227091751.589612-1-d.dulov@aladdin.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/hifi1: add a null check of kzalloc_node in hfi1_ipoib_txreq_init

[ Upstream commit c874ad879c2f29ebe040a34b974389875c0d81eb ]

kzalloc_node may fails, check it and do the cleanup.

Fixes: b1151b74ff68 ("IB/hfi1: Fix alloc failure with larger txqueuelen")
Signed-off-by: Kang Chen <void0red@gmail.com>
Link: https://lore.kernel.org/r/20230227100212.910820-1-void0red@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: at91: clk-sam9x60-pll: fix return value check

[ Upstream commit 1bd8e27fd0db0fe7f489213836dcbab92934f8fa ]

sam9x60_frac_pll_compute_mul_frac() can't return zero. Remove the check
against zero to reflect this.

Fixes: 43b1bb4a9b3e ("clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230227105931.2812412-1-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing/user_events: Ensure write index cannot be negative

[ Upstream commit cd98c93286a30cc4588dfd02453bec63c2f4acf4 ]

The write index indicates which event the data is for and accesses a
per-file array. The index is passed by user processes during write()
calls as the first 4 bytes. Ensure that it cannot be negative by
returning -EINVAL to prevent out of bounds accesses.

Update ftrace self-test to ensure this occurs properly.

Link: https://lkml.kernel.org/r/20230425225107.8525-2-beaub@linux.microsoft.com
Fixes: 7f5a08c79df3 ("user_events: Add minimal support for trace_event into ftrace")
Reported-by: Doug Cook <dcook@linux.microsoft.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/rt: Fix bad task migration for rt tasks

[ Upstream commit feffe5bb274dd3442080ef0e4053746091878799 ]

Commit 95158a89dd50 ("sched,rt: Use the full cpumask for balancing")
allows find_lock_lowest_rq() to pick a task with migration disabled.
The purpose of the commit is to push the current running task on the
CPU that has the migrate_disable() task away.

However, there is a race which allows a migrate_disable() task to be
migrated. Consider:

  CPU0                                    CPU1
  push_rt_task
    check is_migration_disabled(next_task)

                                          task not running and
                                          migration_disabled == 0

    find_lock_lowest_rq(next_task, rq);
      _double_lock_balance(this_rq, busiest);
        raw_spin_rq_unlock(this_rq);
        double_rq_lock(this_rq, busiest);
          <<wait for busiest rq>>
                                              <wakeup>
                                          task become running
                                          migrate_disable();
                                            <context out>
    deactivate_task(rq, next_task, 0);
    set_task_cpu(next_task, lowest_rq->cpu);
      WARN_ON_ONCE(is_migration_disabled(p));

Fixes: 95158a89dd50 ("sched,rt: Use the full cpumask for balancing")
Signed-off-by: Schspa Shi <schspa@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Dwaine Gonyier <dgonyier@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: Fix ptdump when KASAN is enabled

[ Upstream commit ecd7ebaf0b5a094a6180b299a5635c0eea42be4b ]

The KASAN shadow region was moved next to the kernel mapping but the
ptdump code was not updated and it appears to break the dump of the kernel
page table, so fix this by moving the KASAN shadow region in ptdump.

Fixes: f7ae02333d13 ("riscv: Move KASAN mapping next to the kernel mapping")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230203075232.274282-6-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "objtool: Support addition to set CFA base"

[ Upstream commit e18398e80c73e3cc7d9c3d2e0bc06a4af8f4f1cb ]

Commit 468af56a7bba ("objtool: Support addition to set CFA base") was
added as a preparatory patch for arm64 support, but that support never
came.  It triggers a false positive warning on x86, so just revert it
for now.

Fixes the following warning:

  vmlinux.o: warning: objtool: cdce925_regmap_i2c_write+0xdb: stack state mismatch: cfa1=4+120 cfa2=5+40

Fixes: 468af56a7bba ("objtool: Support addition to set CFA base")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/oe-kbuild-all/202304080538.j5G6h1AB-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/core: Fix hardlockup failure caused by perf throttle

[ Upstream commit 15def34e2635ab7e0e96f1bc32e1b69609f14942 ]

commit e050e3f0a71bf ("perf: Fix broken interrupt rate throttling")
introduces a change in throttling threshold judgment. Before this,
compare hwc->interrupts and max_samples_per_tick, then increase
hwc->interrupts by 1, but this commit reverses order of these two
behaviors, causing the semantics of max_samples_per_tick to change.
In literal sense of "max_samples_per_tick", if hwc->interrupts ==
max_samples_per_tick, it should not be throttled, therefore, the judgment
condition should be changed to "hwc->interrupts > max_samples_per_tick".

In fact, this may cause the hardlockup to fail, The minimum value of
max_samples_per_tick may be 1, in this case, the return value of
__perf_event_account_interrupt function is 1.
As a result, nmi_watchdog gets throttled, which would stop PMU (Use x86
architecture as an example, see x86_pmu_handle_irq).

Fixes: e050e3f0a71b ("perf: Fix broken interrupt rate throttling")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230227023508.102230-1-yangjihong1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/fair: Fix inaccurate tally of ttwu_move_affine

[ Upstream commit 39afe5d6fc59237ff7738bf3ede5a8856822d59d ]

There are scenarios where non-affine wakeups are incorrectly counted as
affine wakeups by schedstats.

When wake_affine_idle() returns prev_cpu which doesn't equal to
nr_cpumask_bits, it will slip through the check: target == nr_cpumask_bits
in wake_affine() and be counted as if target == this_cpu in schedstats.

Replace target == nr_cpumask_bits with target != this_cpu to make sure
affine wakeups are accurately tallied.

Fixes: 806486c377e33 (sched/fair: Do not migrate if the prev_cpu is idle)
Suggested-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Libo Chen <libo.chen@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20220810223313.386614-1-libo.chen@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/rtas: use memmove for potentially overlapping buffer copy

[ Upstream commit 271208ee5e335cb1ad280d22784940daf7ddf820 ]

Using memcpy() isn't safe when buf is identical to rtas_err_buf, which
can happen during boot before slab is up. Full context which may not
be obvious from the diff:

if (altbuf) {
buf = altbuf;
} else {
buf = rtas_err_buf;
if (slab_is_available())
buf = kmalloc(RTAS_ERROR_LOG_MAX, GFP_ATOMIC);
}
if (buf)
memcpy(buf, rtas_err_buf, RTAS_ERROR_LOG_MAX);

This was found by inspection and I'm not aware of it causing problems
in practice. It appears to have been introduced by commit
033ef338b6e0 ("powerpc: Merge rtas.c into arch/powerpc/kernel"); the
old ppc64 version of this code did not have this problem.

Use memmove() instead.

Fixes: 033ef338b6e0 ("powerpc: Merge rtas.c into arch/powerpc/kernel")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-2-010e4416f13f@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

macintosh: via-pmu-led: requires ATA to be set

[ Upstream commit 05dce4ba125336875cd3eed3c1503fa81cd2f691 ]

LEDS_TRIGGER_DISK depends on ATA, so selecting LEDS_TRIGGER_DISK
when ATA is not set/enabled causes a Kconfig warning:

WARNING: unmet direct dependencies detected for LEDS_TRIGGER_DISK
  Depends on [n]: NEW_LEDS [=y] && LEDS_TRIGGERS [=y] && ATA [=n]
  Selected by [y]:
  - ADB_PMU_LED_DISK [=y] && MACINTOSH_DRIVERS [=y] && ADB_PMU_LED [=y] && LEDS_CLASS [=y]

Fix this by making ADB_PMU_LED_DISK depend on ATA.

Seen on both PPC32 and PPC64.

Fixes: 0e865a80c135 ("macintosh: Remove dependency on IDE_GD_ATA if ADB_PMU_LED_DISK is selected")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223014241.20878-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/sysdev/tsi108: fix resource printk format warnings

[ Upstream commit 55d8bd02cc1b9f1063993b5c42c9cabf4af67dea ]

Use "%pa" format specifier for resource_size_t to avoid a compiler
printk format warning.

  arch/powerpc/sysdev/tsi108_pci.c: In function 'tsi108_setup_pci':
  include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t'

Fixes: c4342ff92bed ("[POWERPC] Update mpc7448hpc2 board irq support using device tree")
Fixes: 2b9d7467a6db ("[POWERPC] Add tsi108 pci and platform device data register function")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
[mpe: Use pr_info() and unsplit string]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223070116.660-5-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/wii: fix resource printk format warnings

[ Upstream commit 7b69600d4da0049244e9be2f5ef5a2f8e04fcd9a ]

Use "%pa" format specifier for resource_size_t to avoid compiler
printk format warnings.

../arch/powerpc/platforms/embedded6xx/flipper-pic.c: In function 'flipper_pic_init':
../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
../arch/powerpc/platforms/embedded6xx/flipper-pic.c:148:9: note: in expansion of macro 'pr_info'
  148 |         pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base);
      |         ^~~~~~~

../arch/powerpc/platforms/embedded6xx/hlwd-pic.c: In function 'hlwd_pic_init':
../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
../arch/powerpc/platforms/embedded6xx/hlwd-pic.c:174:9: note: in expansion of macro 'pr_info'
  174 |         pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base);
      |         ^~~~~~~

../arch/powerpc/platforms/embedded6xx/wii.c: In function 'wii_ioremap_hw_regs':
../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
../arch/powerpc/platforms/embedded6xx/wii.c:77:17: note: in expansion of macro 'pr_info'
   77 |                 pr_info("%s at 0x%08x mapped to 0x%p\n", name,
      |                 ^~~~~~~

Fixes: 028ee972f032 ("powerpc: gamecube/wii: flipper interrupt controller support")
Fixes: 9c21025c7845 ("powerpc: wii: hollywood interrupt controller support")
Fixes: 5a7ee3198dfa ("powerpc: wii: platform support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223070116.660-3-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/mpc512x: fix resource printk format warning

[ Upstream commit 7538c97e2b80ff6b7a8ea2ecf16a04355461b439 ]

Use "%pa" format specifier for resource_size_t to avoid a compiler
printk format warning.

../arch/powerpc/platforms/512x/clock-commonclk.c: In function 'mpc5121_clk_provide_backwards_compat':
../arch/powerpc/platforms/512x/clock-commonclk.c:989:44: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
  989 |         snprintf(devname, sizeof(devname), "%08x.%s", res.start, np->name); \
      |                                            ^~~~~~~~~  ~~~~~~~~~
      |                                                          |
      |                                                          resource_size_t {aka long long unsigned int}

Prevents 24 such warnings.

Fixes: 01f25c371658 ("clk: mpc512x: add backwards compat to the CCF code")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223070116.660-2-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/perf: Properly detect mpc7450 family

[ Upstream commit e7299f961fe5e4496db0bfaa9e819f5e97f3846b ]

Unlike PVR_POWER8, etc ...., PVR_7450 represents a full PVR
value and not a family value.

To avoid confusion, do like E500 family and define the relevant
PVR_VER_xxxx values for the 7450 family:
  0x8000 ==> 7450
  0x8001 ==> 7455
  0x8002 ==> 7447
  0x8003 ==> 7447A
  0x8004 ==> 7448

And use them to detect 7450 family for perf events.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/202302260657.7dM9Uwev-lkp@intel.com/
Fixes: ec3eb9d941a9 ("powerpc/perf: Use PVR rather than oprofile field to determine CPU version")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/99ca1da2e5a6cf82a8abf4bc034918e500e31781.1677513277.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

macintosh/windfarm_smu_sat: Add missing of_node_put()

[ Upstream commit 631cf002826007ab7415258ee647dcaf8845ad5a ]

We call of_node_get() in wf_sat_probe() after sat is created,
so we need the of_node_put() before *kfree(sat)*.

Fixes: ac171c46667c ("[PATCH] powerpc: Thermal control for dual core G5s")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230330033558.2562778-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/powerpc/pmu: Fix sample field check in the mmcra_thresh_marked_sample_test

[ Upstream commit 8a32341cf04ba05974931b4664683c2c9fb84e56 ]

The testcase verifies the setting of different fields in Monitor Mode
Control Register A (MMCRA). In the current code, EV_CODE_EXTRACT macro
is used to extract the "sample" field, which then needs to be further
processed to fetch rand_samp_elig and rand_samp_mode bits. But the
current code is not passing valid sample field to EV_CODE_EXTRACT
macro. Patch addresses this by fixing the input for EV_CODE_EXTRACT.

Fixes: 29cf373c5766 ("selftests/powerpc/pmu: Add interface test for mmcra register fields")
Reported-by: David Binderman <dcb314@hotmail.com>
Link: https://lore.kernel.org/r/DB6P189MB0568CF002762C6C43AF6DF169CA89@DB6P189MB0568.EURP189.PROD.OUTLOOK.COM
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230301170918.69176-1-kjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: mmp: Fix deferred clk handling in mmphw_probe()

[ Upstream commit b3a7a9ab65ae2f2626c7222fb79cdd433f8c5252 ]

When dev_err_probe() is called, 'ret' holds the value of the previous
successful devm_request_irq() call.
'ret' should be assigned with a meaningful value before being used in
dev_err_probe().

While at it, use and return "PTR_ERR(ctrl->clk)" instead of a hard-coded
"-ENOENT" so that -EPROBE_DEFER is handled and propagated correctly.

Fixes: 81b63420564d ("fbdev: mmp: Make use of the helper function dev_err_probe()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio_ring: don't update event idx on get_buf

[ Upstream commit 6c0b057cec5eade4c3afec3908821176931a9997 ]

In virtio_net, if we disable napi_tx, when we trigger a tx interrupt,
the vq->event_triggered will be set to true. It is then never reset
until we explicitly call virtqueue_enable_cb_delayed or
virtqueue_enable_cb_prepare.

If we disable the napi_tx, virtqueue_enable_cb* will only be called when
the tx ring is getting relatively empty.

Since event_triggered is true, VRING_AVAIL_F_NO_INTERRUPT or
VRING_PACKED_EVENT_FLAG_DISABLE will not be set. As a result we update
vring_used_event(&vq->split.vring) or vq->packed.vring.driver->off_wrap
every time we call virtqueue_get_buf_ctx. This causes more interrupts.

To summarize:
1) event_triggered was set to true in vring_interrupt()
2) after this nothing will happen in virtqueue_disable_cb() so
   VRING_AVAIL_F_NO_INTERRUPT is not set in avail_flags_shadow
3) virtqueue_get_buf_ctx_split() will still think the cb is enabled
   and then it will publish a new event index

To fix:
update VRING_AVAIL_F_NO_INTERRUPT or VRING_PACKED_EVENT_FLAG_DISABLE in
the vq when we call virtqueue_disable_cb even when event_triggered is
true.

Tested with iperf:
iperf3 tcp stream:
vm1 -----------------> vm2
vm2 just receives tcp data stream from vm1, and sends acks to vm1,
there are many tx interrupts in vm2.
with the patch applied there are just a few tx interrupts.

v2->v3:
-update the interrupt disable flag even with the event_triggered is set,
-instead of checking whether event_triggered is set in
-virtqueue_get_buf_ctx_{packed/split}, will cause the drivers  which have
-not called virtqueue_{enable/disable}_cb to miss notifications.

v3->v4:
-remove change for
-"if (vq->packed.event_flags_shadow != VRING_PACKED_EVENT_FLAG_DISABLE)"
-in virtqueue_disable_cb_packed

Fixes: 8d622d21d248 ("virtio: fix up virtio_disable_cb")
Signed-off-by: Albert Huang <huangjie.albert@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230329102300.61000-1-huangjie.albert@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spmi: Add a check for remove callback when removing a SPMI driver

[ Upstream commit b56eef3e16d888883fefab47425036de80dd38fc ]

When removing a SPMI driver, there can be a crash due to NULL pointer
dereference if it does not have a remove callback defined. This is
one such call trace observed when removing the QCOM SPMI PMIC driver:

 dump_backtrace.cfi_jt+0x0/0x8
 dump_stack_lvl+0xd8/0x16c
 panic+0x188/0x498
 __cfi_slowpath+0x0/0x214
 __cfi_slowpath+0x1dc/0x214
 spmi_drv_remove+0x16c/0x1e0
 device_release_driver_internal+0x468/0x79c
 driver_detach+0x11c/0x1a0
 bus_remove_driver+0xc4/0x124
 driver_unregister+0x58/0x84
 cleanup_module+0x1c/0xc24 [qcom_spmi_pmic]
 __do_sys_delete_module+0x3ec/0x53c
 __arm64_sys_delete_module+0x18/0x28
 el0_svc_common+0xdc/0x294
 el0_svc+0x38/0x9c
 el0_sync_handler+0x8c/0xf0
 el0_sync+0x1b4/0x1c0

If a driver has all its resources allocated through devm_() APIs and
does not need any other explicit cleanup, it would not require a
remove callback to be defined. Hence, add a check for remove callback
presence before calling it when removing a SPMI driver.

Link: https://lore.kernel.org/r/1671601032-18397-2-git-send-email-quic_jprakash@quicinc.com
Fixes: 6f00f8c8635f ("mfd: qcom-spmi-pmic: Use devm_of_platform_populate()")
Fixes: 5a86bf343976 ("spmi: Linux driver framework for SPMI")
Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230413223834.4084793-7-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8192e: Fix W_DISABLE# does not work after stop/start

[ Upstream commit 3fac2397f562eb669ddc2f45867a253f3fc26184 ]

When loading the driver for rtl8192e, the W_DISABLE# switch is working as
intended. But when the WLAN is turned off in software and then turned on
again the W_DISABLE# does not work anymore. Reason for this is that in
the function _rtl92e_dm_check_rf_ctrl_gpio() the bfirst_after_down is
checked and returned when true. bfirst_after_down is set true when
switching the WLAN off in software. But it is not set to false again
when WLAN is turned on again.

Add bfirst_after_down = false in _rtl92e_sta_up to reset bit and fix
above described bug.

Fixes: 94a799425eee ("From: wlanfae <wlanfae@realtek.com> [PATCH 1/8] rtl8192e: Import new version of driver from realtek")
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20230418200201.GA17398@matrix-ESPRIMO-P710
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: cadence-quadspi: use macro DEFINE_SIMPLE_DEV_PM_OPS

[ Upstream commit be3206e8906e7a93df673ab2e96d69304a008edc ]

Using this macro makes the code more readable.
It also inits the members of dev_pm_ops in the following manner
without us explicitly needing to:

.suspend = cqspi_suspend, \
.resume = cqspi_resume, \
.freeze = cqspi_suspend, \
.thaw = cqspi_resume, \
.poweroff = cqspi_suspend, \
.restore = cqspi_resume

Also get rid of conditional compilation based on CONFIG_PM_SLEEP because
it introduces build issues with certain configs when CQSPI_DEV_PM_OPS is
just NULL.

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304191900.2fARFQW9-lkp@intel.com/
Fixes: 140623410536 ("mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller")
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230420054257.925092-1-d-gole@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: 8250: Add missing wakeup event reporting

[ Upstream commit 0ba9e3a13c6adfa99e32b2576d20820ab10ad48a ]

An 8250 UART configured as a wake-up source would not have reported
itself through sysfs as being the source of wake-up, correct that.

Fixes: b3b708fa2780 ("wake up from a serial port")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230414170241.2016255-1-f.fainelli@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: fsl_lpuart: adjust buffer length to the intended size

[ Upstream commit f73fd750552524b06b5d77ebfdd106ccc8fcac61 ]

Based on the fls function definition provided below, we should not
subtract 1 to obtain the correct buffer length:

fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.

Fixes: 5887ad43ee02 ("tty: serial: fsl_lpuart: Use cyclic DMA for Rx")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://lore.kernel.org/r/20230410195555.1003900-1-shenwei.wang@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: stratix10-svc: Fix an NULL vs IS_ERR() bug in probe

[ Upstream commit e1d6ca042e62c2a69513235f8629eb6e62ca79c5 ]

The svc_create_memory_pool() function returns error pointers.  It never
returns NULL.  Fix the check.

Fixes: 7ca5ce896524 ("firmware: add Intel Stratix10 service layer driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/5f9a8cb4-5a4f-460b-9cdc-2fae6c5b7922@kili.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: mtu3: fix kernel panic at qmu transfer done irq handler

[ Upstream commit d28f4091ea7ec3510fd6a3c6d433234e7a2bef14 ]

When handle qmu transfer irq, it will unlock @mtu->lock before give back
request, if another thread handle disconnect event at the same time, and
try to disable ep, it may lock @mtu->lock and free qmu ring, then qmu
irq hanlder may get a NULL gpd, avoid the KE by checking gpd's value before
handling it.

e.g.
qmu done irq on cpu0                 thread running on cpu1

qmu_done_tx()
  handle gpd [0]
    mtu3_requ_complete()        mtu3_gadget_ep_disable()
      unlock @mtu->lock
        give back request         lock @mtu->lock
                                    mtu3_ep_disable()
                                      mtu3_gpd_ring_free()
                                   unlock @mtu->lock
      lock @mtu->lock
    get next gpd [1]

[1]: goto [0] to handle next gpd, and next gpd may be NULL.

Fixes: 48e0d3735aa5 ("usb: mtu3: supports new QMU format")
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20230417025203.18097-3-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: chipidea: fix missing goto in `ci_hdrc_probe`

[ Upstream commit d6f712f53b79f5017cdcefafb7a5aea9ec52da5d ]

From the comment of ci_usb_phy_init, it returns an error code if
usb_phy_init has failed, and it should do some clean up, not just
return directly.

Fix this by goto the error handling.

Fixes: 74475ede784d ("usb: chipidea: move PHY operation to core")
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Yinhao Hu <dddddd@hust.edu.cn>
Link: https://lore.kernel.org/r/20230412055852.971991-1-dddddd@hust.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: tegra-xudc: Fix crash in vbus_draw

[ Upstream commit 5629d31955297ca47b9283c64fff70f2f34aa528 ]

Commit ac82b56bda5f ("usb: gadget: tegra-xudc: Add vbus_draw support")
populated the vbus_draw callback for the Tegra XUDC driver. The function
tegra_xudc_gadget_vbus_draw(), that was added by this commit, assumes
that the pointer 'curr_usbphy' has been initialised, which is not always
the case because this is only initialised when the USB role is updated.
Fix this crash, by checking that the 'curr_usbphy' is valid before
dereferencing.

Fixes: ac82b56bda5f ("usb: gadget: tegra-xudc: Add vbus_draw support")
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230405181854.42355-1-jonathanh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sh: sq: Fix incorrect element size for allocating bitmap buffer

[ Upstream commit 80f746e2bd0e1da3fdb49a53570e54a1a225faac ]

The Store Queue code allocates a bitmap buffer with the size of
multiple of sizeof(long) in sq_api_init(). While the buffer size
is calculated correctly, the code uses the wrong element size to
allocate the buffer which results in the allocated bitmap buffer
being too small.

Fix this by allocating the buffer with kcalloc() with element size
sizeof(long) instead of kzalloc() whose elements size defaults to
sizeof(char).

Fixes: d7c30c682a27 ("sh: Store Queue API rework.")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230419114854.528677-1-glaubitz@physik.fu-berlin.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

uapi/linux/const.h: prefer ISO-friendly __typeof__

[ Upstream commit 31088f6f7906253ef4577f6a9b84e2d42447dba0 ]

typeof is (still) a GNU extension, which means that it cannot be used when
building ISO C (e.g.  -std=c99).  It should therefore be avoided in uapi
headers in favour of the ISO-friendly __typeof__.

Unfortunately this issue could not be detected by
CONFIG_UAPI_HEADER_TEST=y as the __ALIGN_KERNEL() macro is not expanded in
any uapi header.

This matters from a userspace perspective, not a kernel one. uapi
headers and their contents are expected to be usable in a variety of
situations, and in particular when building ISO C applications (with
-std=c99 or similar).

This particular problem can be reproduced by trying to use the
__ALIGN_KERNEL macro directly in application code, say:

#include <linux/const.h>

int align(int x, int a)
{
return __KERNEL_ALIGN(x, a);
}

and trying to build that with -std=c99.

Link: https://lkml.kernel.org/r/20230411092747.3759032-1-kevin.brodsky@arm.com
Fixes: a79ff731a1b2 ("netfilter: xtables: make XT_ALIGN() usable in exported headers by exporting __ALIGN_KERNEL()")
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reported-by: Ruben Ayrapetyan <ruben.ayrapetyan@arm.com>
Tested-by: Ruben Ayrapetyan <ruben.ayrapetyan@arm.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Tested-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scripts/gdb: raise error with reduced debugging information

[ Upstream commit 8af055ae25bff48f57227f5e3d48a4306f3dd1c4 ]

If CONFIG_DEBUG_INFO_REDUCED is enabled in the kernel configuration, we
will typically not be able to load vmlinux-gdb.py and will fail with:

Traceback (most recent call last):
  File "/home/fainelli/work/buildroot/output/arm64/build/linux-custom/vmlinux-gdb.py", line 25, in <module>
    import linux.utils
  File "/home/fainelli/work/buildroot/output/arm64/build/linux-custom/scripts/gdb/linux/utils.py", line 131, in <module>
    atomic_long_counter_offset = atomic_long_type.get_type()['counter'].bitpos
KeyError: 'counter'

Rather be left wondering what is happening only to find out that reduced
debug information is the cause, raise an eror.  This was not typically a
problem until e3c8d33e0d62 ("scripts/gdb: fix 'lx-dmesg' on 32 bits arch")
but it has since then.

Link: https://lkml.kernel.org/r/20230406215252.1580538-1-f.fainelli@gmail.com
Fixes: e3c8d33e0d62 ("scripts/gdb: fix 'lx-dmesg' on 32 bits arch")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Antonio Borneo <antonio.borneo@foss.st.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: xiic: xiic_xfer(): Fix runtime PM leak on error path

[ Upstream commit d663d93bb47e7ab45602b227701022d8aa16040a ]

The xiic_xfer() function gets a runtime PM reference when the function is
entered. This reference is released when the function is exited. There is
currently one error path where the function exits directly, which leads to
a leak of the runtime PM reference.

Make sure that this error path also releases the runtime PM reference.

Fixes: fdacc3c7405d ("i2c: xiic: Switch from waitqueue to completion")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: cadence: cdns_i2c_master_xfer(): Fix runtime PM leak on error path

[ Upstream commit ae1664f04f504a998737f5bb563f16b44357bcca ]

The cdns_i2c_master_xfer() function gets a runtime PM reference when the
function is entered. This reference is released when the function is
exited. There is currently one error path where the function exits
directly, which leads to a leak of the runtime PM reference.

Make sure that this error path also releases the runtime PM reference.

Fixes: 1a351b10b967 ("i2c: cadence: Added slave support")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: cadence-quadspi: fix suspend-resume implementations

[ Upstream commit 2087e85bb66ee3652dafe732bb9b9b896229eafc ]

The cadence QSPI driver misbehaves after performing a full system suspend
resume:
...
spi-nor spi0.0: resume() failed
...
This results in a flash connected via OSPI interface after system suspend-
resume to be unusable.
fix these suspend and resume functions.

Fixes: 140623410536 ("mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller")
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230417091027.966146-3-d-gole@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel: novatek-nt35950: Only unregister DSI1 if it exists

[ Upstream commit a50be876f4fe2349dc8b056a49d87f69c944570f ]

Commit 5dd45b66742a ("drm/panel: novatek-nt35950: Improve error handling")
introduced logic to unregister DSI1 on any sort of probe failure, as
that's not done automatically by kernel APIs.

It did not however account for cases where only one DSI host is used.
Fix that.

Fixes: 5dd45b66742a ("drm/panel: novatek-nt35950: Improve error handling")
Reported-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417-topic-maple_panel_fixup-v1-1-07c8db606f5e@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/PM: Extend D3hot delay for NVIDIA HDA controllers

[ Upstream commit a5a6dd2624698b6e3045c3a1450874d8c790d5d9 ]

Assignment of NVIDIA Ampere-based GPUs have seen a regression since the
below referenced commit, where the reduced D3hot transition delay appears
to introduce a small window where a D3hot->D0 transition followed by a bus
reset can wedge the device.  The entire device is subsequently unavailable,
returning -1 on config space read and is unrecoverable without a host
reset.

This has been observed with RTX A2000 and A5000 GPU and audio functions
assigned to a Windows VM, where shutdown of the VM places the devices in
D3hot prior to vfio-pci performing a bus reset when userspace releases the
devices.  The issue has roughly a 2-3% chance of occurring per shutdown.

Restoring the HDA controller d3hot_delay to the effective value before the
below commit has been shown to resolve the issue.  NVIDIA confirms this
change should be safe for all of their HDA controllers.

Fixes: 3e347969a577 ("PCI/PM: Reduce D3hot delay with usleep_range()")
Link: https://lore.kernel.org/r/20230413194042.605768-1-alex.williamson@redhat.com
Reported-by: Zhiyi Guo <zhguo@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Tarun Gupta <targupta@nvidia.com>
Cc: Abhishek Sahu <abhsahu@nvidia.com>
Cc: Tarun Gupta <targupta@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl_mqs: move of_node_put() to the correct location

[ Upstream commit 1c34890273a020d61d6127ade3f68ed1cb21c16a ]

of_node_put() should have been done directly after
mqs_priv->regmap = syscon_node_to_regmap(gpr_np);
otherwise it creates a reference leak on the success path.

To fix this, of_node_put() is moved to the correct location, and change
all the gotos to direct returns.

Fixes: a9d273671440 ("ASoC: fsl_mqs: Fix error handling in probe")
Signed-off-by: Liliang Ye <yll@hust.edu.cn>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/20230403152647.17638-1-yll@hust.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel: novatek-nt35950: Improve error handling

[ Upstream commit 5dd45b66742a1f3cfa9a92dc0ac8714c7708ee6c ]

In a very peculiar case when probing and registering with the secondary
DSI host succeeds, but the OF backlight or DSI attachment fails, the
primary DSI device is automatically cleaned up, but the secondary one
is not, leading to -EEXIST when the driver core tries to handle
-EPROBE_DEFER.

Unregister the DSI1 device manually on failure to prevent that.

Fixes: 623a3531e9cf ("drm/panel: Add driver for Novatek NT35950 DSI DriverIC panels")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230415-konrad-longbois-next-v1-1-ce695dc9df84@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: etm_pmu: Set the module field

[ Upstream commit 18996a113f2567aef3057e300e3193ce2df1684c ]

struct pmu::module must be set to the module owning the PMU driver.
Set this for the coresight etm_pmu.

Fixes: 8e264c52e1dab ("coresight: core: Allow the coresight core driver to be built as a module")
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230405094922.667834-1-suzuki.poulose@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

cacheinfo: Check sib_leaf in cache_leaves_are_shared()

[ Upstream commit 7a306e3eabf2b2fd8cffa69b87b32dbf814d79ce ]

If there is no ACPI/DT information, it is assumed that L1 caches
are private and L2 (and higher) caches are shared. A cache is
'shared' between two CPUs if it is accessible from these two
CPUs.

Each CPU owns a representation (i.e. has a dedicated cacheinfo struct)
of the caches it has access to. cache_leaves_are_shared() tries to
identify whether two representations are designating the same actual
cache.

In cache_leaves_are_shared(), if 'this_leaf' is a L2 cache (or higher)
and 'sib_leaf' is a L1 cache, the caches are detected as shared as
only this_leaf's cache level is checked.
This is leads to setting sib_leaf as being shared with another CPU,
which is incorrect as this is a L1 cache.

Check 'sib_leaf->level'. Also update the comment as the function is
called when populating 'shared_cpu_map'.

Fixes: f16d1becf96f ("cacheinfo: Use cache identifiers to check if the caches are shared if available")
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230414081453.244787-2-pierre.gondois@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: amd_sfh: Handle "no sensors" enabled for SFH1.1

[ Upstream commit 8455cbb25927013b3417ab619dced1c0e87708af ]

Based on num_hid_devices, each sensor device is initialized. If
"no sensors" is initialized, amd_sfh work initialization and scheduling
doesn’t make sense and returns EOPNOTSUPP to stop driver probe. Hence,
add a check for "no sensors" enabled to handle the special case.

Fixes: 93ce5e0231d7 ("HID: amd_sfh: Implement SFH1.1 functionality")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: amd_sfh: Increase sensor command timeout for SFH1.1

[ Upstream commit 571dc8f59dd477037bb5a029e8d1b5a4a4d9dd63 ]

The initialization of SFH1.1 sensors may take some time. Hence, increase
sensor command timeouts in order to obtain status responses within a
maximum timeout.

Fixes: 93ce5e0231d7 ("HID: amd_sfh: Implement SFH1.1 functionality")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: amd_sfh: Correct the stop all command

[ Upstream commit 82c2a0d137794f5ef47982231593a00aee26ce3b ]

Misinterpreted the stop all command in SHF1.1 firmware. Therefore, it is
necessary to update the stop all command accordingly to disable all
sensors.

Fixes: 93ce5e0231d7 ("HID: amd_sfh: Implement SFH1.1 functionality")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: amd_sfh: Add support for shutdown operation

[ Upstream commit 1353ecaf1830d6d1b74f3225378a9498b4e14fdd ]

As soon as the system is booted after shutdown, the sensors may remain in
a weird state and fail to initialize. Therefore, all sensors should be
turned off during shutdown.

Fixes: 4f567b9f8141 ("SFH: PCIe driver to add support of AMD sensor fusion hub")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: amd_sfh: Fix illuminance value

[ Upstream commit a33e5e393171ae8384d3381db5cd159ba877cfcb ]

Illuminance value is actually 32 bits, but is incorrectly trancated to
16 bits. Hence convert to integer illuminace accordingly to reflect
correct values.

Fixes: 93ce5e0231d7 ("HID: amd_sfh: Implement SFH1.1 functionality")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: amd_sfh: Correct the sensor enable and disable command

[ Upstream commit 0b9255bf11baa61cd526e6bd24d6c8e6d1eabf8d ]

In order to start or stop sensors, the firmware command needs to be
changed to add an additional default subcommand value. For this reason,
add a subcommand value to enable or disable sensors accordingly.

Fixes: 93ce5e0231d7 ("HID: amd_sfh: Implement SFH1.1 functionality")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: amd_sfh: Correct the structure fields

[ Upstream commit 7e7fdab79899f62de39c9280fb78f3d3b02ac207 ]

Misinterpreted sfh_cmd_base structure member fields. Therefore, adjust
the structure member fields accordingly to reflect functionality.

Fixes: 93ce5e0231d7 ("HID: amd_sfh: Implement SFH1.1 functionality")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scripts/gdb: bail early if there are no generic PD

[ Upstream commit f19c3c2959e465209ade1a7a699e6cbf4359ce78 ]

Avoid generating an exception if there are no generic power domain(s)
registered:

(gdb) lx-genpd-summary
domain                          status          children
    /device                                             runtime status
----------------------------------------------------------------------
Python Exception <class 'gdb.error'>: No symbol "gpd_list" in current context.
Error occurred in Python: No symbol "gpd_list" in current context.
(gdb) quit

[f.fainelli@gmail.com: correctly invoke gdb_eval_or_none]
Link: https://lkml.kernel.org/r/20230327185746.3856407-1-f.fainelli@gmail.com
Link: https://lkml.kernel.org/r/20230323231659.3319941-1-f.fainelli@gmail.com
Fixes: 8207d4a88e1e ("scripts/gdb: add lx-genpd-summary command")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scripts/gdb: bail early if there are no clocks

[ Upstream commit 1d7adbc74c009057ed9dc3112f388e91a9c79acc ]

Avoid generating an exception if there are no clocks registered:

(gdb) lx-clk-summary
                                 enable  prepare  protect
   clock                          count    count    count        rate
------------------------------------------------------------------------
Python Exception <class 'gdb.error'>: No symbol "clk_root_list" in
current context.
Error occurred in Python: No symbol "clk_root_list" in current context.

Link: https://lkml.kernel.org/r/20230323225246.3302977-1-f.fainelli@gmail.com
Fixes: d1e9710b63d8 ("scripts/gdb: initial clk support: lx-clk-summary")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ia64: salinfo: placate defined-but-not-used warning

[ Upstream commit 0de155752b152d6bcd96b5b5bf20af336abd183a ]

When CONFIG_PROC_FS is not set, proc_salinfo_show() is not used.  Mark the
function as __maybe_unused to quieten the warning message.

../arch/ia64/kernel/salinfo.c:584:12: warning: 'proc_salinfo_show' defined but not used [-Wunused-function]
  584 | static int proc_salinfo_show(struct seq_file *m, void *v)
      |            ^~~~~~~~~~~~~~~~~

Link: https://lkml.kernel.org/r/20230223034309.13375-1-rdunlap@infradead.org
Fixes: 3f3942aca6da ("proc: introduce proc_create_single{,_data}")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ia64: mm/contig: fix section mismatch warning/error

[ Upstream commit 58deeb4ef3b054498747d0929d94ac53ab90981f ]

alloc_per_cpu_data() is called by find_memory(), which is marked as
__init.  Therefore alloc_per_cpu_data() can also be marked as __init to
remedy this modpost problem.

WARNING: modpost: vmlinux.o: section mismatch in reference: alloc_per_cpu_data (section: .text) -> memblock_alloc_try_nid (section: .init.text)

Link: https://lkml.kernel.org/r/20230223034258.12917-1-rdunlap@infradead.org
Fixes: 4b9ddc7cf272 ("[IA64] Fix section mismatch in contig.c version of per_cpu_init()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/EDR: Clear Device Status after EDR error recovery

[ Upstream commit c441b1e03da6c680a3e12da59c554f454f2ccf5e ]

During EDR recovery, the OS must clear error status of the port that
triggered DPC even if firmware retains control of DPC and AER (see the
implementation note in the PCI Firmware spec r3.3, sec 4.6.12).

Prior to 068c29a248b6 ("PCI/ERR: Clear PCIe Device Status errors only if
OS owns AER"), the port Device Status was cleared in this path:

  edr_handle_event
    dpc_process_error(dev)                 # "dev" triggered DPC
    pcie_do_recovery(dev, dpc_reset_link)
      dpc_reset_link                       # exit DPC
      pcie_clear_device_status(dev)        # clear Device Status

After 068c29a248b6, pcie_do_recovery() no longer clears Device Status when
firmware controls AER, so the error bit remains set even after recovery.

Per the "Downstream Port Containment configuration control" bit in the
returned _OSC Control Field (sec 4.5.1), the OS is allowed to clear error
status until it evaluates _OST, so clear Device Status in
edr_handle_event() if the error recovery was successful.

[bhelgaas: commit log]
Fixes: 068c29a248b6 ("PCI/ERR: Clear PCIe Device Status errors only if OS owns AER")
Link: https://lore.kernel.org/r/20230315235449.1279209-1-sathyanarayanan.kuppuswamy@linux.intel.com
Reported-by: Tsaur Erwin <erwin.tsaur@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: Fix modalias string generation

[ Upstream commit b19a4266c52de78496fe40f0b37580a3b762e67d ]

The helper generating an OF based modalias (of_device_get_modalias())
works fine, but due to the use of snprintf() internally it needs a
buffer one byte longer than what should be needed just for the entire
string (excluding the '\0'). Most users of this helper are sysfs hooks
providing the modalias string to users. They all provide a PAGE_SIZE
buffer which is way above the number of bytes required to fit the
modalias string and hence do not suffer from this issue.

There is another user though, of_device_request_module(), which is only
called by drivers/usb/common/ulpi.c. This request module function is
faulty, but maybe because in most cases there is an alternative, ULPI
driver users have not noticed it.

In this function, of_device_get_modalias() is called twice. The first
time without buffer just to get the number of bytes required by the
modalias string (excluding the null byte), and a second time, after
buffer allocation, to fill the buffer. The allocation asks for an
additional byte, in order to store the trailing '\0'. However, the
buffer *length* provided to of_device_get_modalias() excludes this extra
byte. The internal use of snprintf() with a length that is exactly the
number of bytes to be written has the effect of using the last available
byte to store a '\0', which then smashes the last character of the
modalias string.

Provide the actual size of the buffer to of_device_get_modalias() to fix
this issue.

Note: the "str[size - 1] = '\0';" line is not really needed as snprintf
will anyway end the string with a null byte, but there is a possibility
that this function might be called on a struct device_node without
compatible, in this case snprintf() would not be executed. So we keep it
just to avoid possible unbounded strings.

Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Peter Chen <peter.chen@kernel.org>
Fixes: 9c829c097f2f ("of: device: Support loading a module with OF based modalias")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vmci_host: fix a race condition in vmci_host_poll() causing GPF

[ Upstream commit ae13381da5ff0e8e084c0323c3cc0a945e43e9c7 ]

During fuzzing, a general protection fault is observed in
vmci_host_poll().

general protection fault, probably for non-canonical address 0xdffffc0000000019: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000c8-0x00000000000000cf]
RIP: 0010:__lock_acquire+0xf3/0x5e00 kernel/locking/lockdep.c:4926
<- omitting registers ->
Call Trace:
 <TASK>
 lock_acquire+0x1a4/0x4a0 kernel/locking/lockdep.c:5672
 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
 _raw_spin_lock_irqsave+0xb3/0x100 kernel/locking/spinlock.c:162
 add_wait_queue+0x3d/0x260 kernel/sched/wait.c:22
 poll_wait include/linux/poll.h:49 [inline]
 vmci_host_poll+0xf8/0x2b0 drivers/misc/vmw_vmci/vmci_host.c:174
 vfs_poll include/linux/poll.h:88 [inline]
 do_pollfd fs/select.c:873 [inline]
 do_poll fs/select.c:921 [inline]
 do_sys_poll+0xc7c/0x1aa0 fs/select.c:1015
 __do_sys_ppoll fs/select.c:1121 [inline]
 __se_sys_ppoll+0x2cc/0x330 fs/select.c:1101
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x4e/0xa0 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

Example thread interleaving that causes the general protection fault
is as follows:

CPU1 (vmci_host_poll)               CPU2 (vmci_host_do_init_context)
-----                               -----
// Read uninitialized context
context = vmci_host_dev->context;
                                    // Initialize context
                                    vmci_host_dev->context = vmci_ctx_create();
                                    vmci_host_dev->ct_type = VMCIOBJ_CONTEXT;

if (vmci_host_dev->ct_type == VMCIOBJ_CONTEXT) {
    // Dereferencing the wrong pointer
    poll_wait(..., &context->host_context);
}

In this scenario, vmci_host_poll() reads vmci_host_dev->context first,
and then reads vmci_host_dev->ct_type to check that
vmci_host_dev->context is initialized. However, since these two reads
are not atomically executed, there is a chance of a race condition as
described above.

To fix this race condition, read vmci_host_dev->context after checking
the value of vmci_host_dev->ct_type so that vmci_host_poll() always
reads an initialized context.

Reported-by: Dae R. Jeong <threeearcat@gmail.com>
Fixes: 8bf503991f87 ("VMCI: host side driver implementation.")
Signed-off-by: Dae R. Jeong <threeearcat@gmail.com>
Link: https://lore.kernel.org/r/ZCGFsdBAU4cYww5l@dragonet
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: fsl-spi: Fix CPM/QE mode Litte Endian

[ Upstream commit c20c57d9868d7f9fd1b2904c7801b07e128f6322 ]

CPM has the same problem as QE so for CPM also use the fix added
by commit 0398fb70940e ("spi/spi_mpc8xxx: Fix QE mode Litte Endian"):

  CPM mode uses Little Endian so words > 8 bits are byte swapped.
  Workaround this by always enforcing wordsize 8 for 16 and 32 bits
  words. Unfortunately this will not work for LSB transfers
  where wordsize is > 8 bits so disable these for now.

Also limit the workaround to 16 and 32 bits words because it can
only work for multiples of 8-bits.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Fixes: 0398fb70940e ("spi/spi_mpc8xxx: Fix QE mode Litte Endian")
Link: https://lore.kernel.org/r/1b7d3e84b1128f42c1887dd2fb9cdf390f541bc1.1680371809.git.christophe.leroy@csgroup.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: rpm: drop bogus pm domain attach

[ Upstream commit 72b2720c18ecde92e6a36c4ac897dd5848e3f379 ]

Any power domain would already have been attached by the platform bus
code so drop the bogus power domain attach which always succeeds from
probe.

This effectively reverts commit 7de109c0abe9 ("interconnect: icc-rpm:
Add support for bus power domain").

Fixes: 7de109c0abe9 ("interconnect: icc-rpm: Add support for bus power domain")
Cc: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # MSM8996 Sony Kagura
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230313084953.24088-3-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: qup: Don't skip cleanup in remove's error path

[ Upstream commit 61f49171a43ab1f80c73c5c88c508770c461e0f2 ]

Returning early in a platform driver's remove callback is wrong. In this
case the dma resources are not released in the error path. this is never
retried later and so this is a permanent leak. To fix this, only skip
hardware disabling if waking the device fails.

Fixes: 64ff247a978f ("spi: Add Qualcomm QUP SPI controller support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230330210341.2459548-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

linux/vt_buffer.h: allow either builtin or modular for macros

[ Upstream commit 2b76ffe81e32afd6d318dc4547e2ba8c46207b77 ]

Fix build errors on ARCH=alpha when CONFIG_MDA_CONSOLE=m.
This allows the ARCH macros to be the only ones defined.

In file included from ../drivers/video/console/mdacon.c:37:
../arch/alpha/include/asm/vga.h:17:40: error: expected identifier or '(' before 'volatile'
   17 | static inline void scr_writew(u16 val, volatile u16 *addr)
      |                                        ^~~~~~~~
../include/linux/vt_buffer.h:24:34: note: in definition of macro 'scr_writew'
   24 | #define scr_writew(val, addr) (*(addr) = (val))
      |                                  ^~~~
../include/linux/vt_buffer.h:24:40: error: expected ')' before '=' token
   24 | #define scr_writew(val, addr) (*(addr) = (val))
      |                                        ^
../arch/alpha/include/asm/vga.h:17:20: note: in expansion of macro 'scr_writew'
   17 | static inline void scr_writew(u16 val, volatile u16 *addr)
      |                    ^~~~~~~~~~
../arch/alpha/include/asm/vga.h:25:29: error: expected identifier or '(' before 'volatile'
   25 | static inline u16 scr_readw(volatile const u16 *addr)
      |                             ^~~~~~~~

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Link: https://lore.kernel.org/r/20230329021529.16188-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: es8316: Handle optional IRQ assignment

[ Upstream commit 39db65a0a17b54915b269d3685f253a4731f344c ]

The driver is able to work fine without relying on a mandatory interrupt
being assigned to the I2C device. This is only needed when making use of
the jack-detect support.

However, the following warning message is always emitted when there is
no such interrupt available:

  es8316 0-0011: Failed to get IRQ 0: -22

Do not attempt to request an IRQ if it is not available/valid. This also
ensures the rather misleading message is not displayed anymore.

Also note the IRQ validation relies on commit dab472eb931bc291 ("i2c /
ACPI: Use 0 to indicate that device does not have interrupt assigned").

Fixes: 822257661031 ("ASoC: es8316: Add jack-detect support")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230328094901.50763-1-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: imx6: Install the fault handler only on compatible match

[ Upstream commit 5f5ac460dfe7f4e11f99de9870f240e39189cf72 ]

commit bb38919ec56e ("PCI: imx6: Add support for i.MX6 PCIe controller")
added a fault hook to this driver in the probe function. So it was only
installed if needed.

commit bde4a5a00e76 ("PCI: imx6: Allow probe deferral by reset GPIO")
moved it from probe to driver init which installs the hook unconditionally
as soon as the driver is compiled into a kernel.

When this driver is compiled as a module, the hook is not registered
until after the driver has been matched with a .compatible and
loaded.

commit 415b6185c541 ("PCI: imx6: Fix config read timeout handling")
extended the fault handling code.

commit 2d8ed461dbc9 ("PCI: imx6: Add support for i.MX8MQ")
added some protection for non-ARM architectures, but this does not
protect non-i.MX ARM architectures.

Since fault handlers can be triggered on any architecture for different
reasons, there is no guarantee that they will be triggered only for the
assumed situation, leading to improper error handling (i.MX6-specific
imx6q_pcie_abort_handler) on foreign systems.

I had seen strange L3 imprecise external abort messages several times on
OMAP4 and OMAP5 devices and couldn't make sense of them until I realized
they were related to this unused imx6q driver because I had
CONFIG_PCI_IMX6=y.

Note that CONFIG_PCI_IMX6=y is useful for kernel binaries that are designed
to run on different ARM SoC and be differentiated only by device tree
binaries. So turning off CONFIG_PCI_IMX6 is not a solution.

Therefore we check the compatible in the init function before registering
the fault handler.

Link: https://lore.kernel.org/r/e1bcfc3078c82b53aa9b78077a89955abe4ea009.1678380991.git.hns@goldelico.com
Fixes: bde4a5a00e76 ("PCI: imx6: Allow probe deferral by reset GPIO")
Fixes: 415b6185c541 ("PCI: imx6: Fix config read timeout handling")
Fixes: 2d8ed461dbc9 ("PCI: imx6: Add support for i.MX8MQ")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: soc-compress: Inherit atomicity from DAI link for Compress FE

[ Upstream commit 37b58becc1cee4d591024f2056d7ffa99c6089e0 ]

After commit bbf7d3b1c4f40 ("ASoC: soc-pcm: align BE 'atomicity' with
that of the FE") BE and FE atomicity must match.

In the case of Compress PCM there is a mismatch in atomicity between FE
and BE and we get errors like this:

[   36.434566]  sai1-wm8960-hifi: dpcm_be_connect: FE is atomic but BE
is nonatomic, invalid configuration
[   36.444278]  PCM Deep Buffer: ASoC: can't connect SAI1.OUT

In order to fix this we must inherit the atomicity from DAI link
associated with current PCM Compress FE.

Fixes: bbf7d3b1c4f4 ("ASoC: soc-pcm: align BE 'atomicity' with that of the FE")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230324124019.30826-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: udc: renesas_usb3: Fix use after free bug in renesas_usb3_remove due to race condition

[ Upstream commit 2b947f8769be8b8181dc795fd292d3e7120f5204 ]

In renesas_usb3_probe, role_work is bound with renesas_usb3_role_work.
renesas_usb3_start will be called to start the work.

If we remove the driver which will call usbhs_remove, there may be
an unfinished work. The possible sequence is as follows:

CPU0                   CPU1

                      renesas_usb3_role_work
renesas_usb3_remove
usb_role_switch_unregister
device_unregister
kfree(sw)
//free usb3->role_sw
                      usb_role_switch_set_role
                      //use usb3->role_sw

The usb3->role_sw could be freed under such circumstance and then
used in usb_role_switch_set_role.

This bug was found by static analysis. And note that removing a
driver is a root-only operation, and should never happen in normal
case. But the root user may directly remove the device which
will also trigger the remove function.

Fix it by canceling the work before cleanup in the renesas_usb3_remove.

Fixes: 39facfa01c9f ("usb: gadget: udc: renesas_usb3: Add register of usb role switch")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20230320062931.505170-1-zyytlz.wz@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: imx: Don't skip cleanup in remove's error path

[ Upstream commit 11951c9e3f364d7ae3b568a0e52c8335d43066b5 ]

Returning early in a platform driver's remove callback is wrong. In this
case the dma resources are not released in the error path. this is never
retried later and so this is a permanent leak. To fix this, only skip
hardware disabling if waking the device fails.

Fixes: d593574aff0a ("spi: imx: do not access registers while clocks disabled")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230306065733.2170662-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>