Simon Glass [Fri, 22 Jan 2016 02:44:49 +0000 (19:44 -0700)]
stdio: Correct a build error with driver model
When driver model is used for video but not for the keyboard, a compiler
warnings is produced. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:44:13 +0000 (19:44 -0700)]
rockchip: jerry: Enable the Chrome OS EC
Turn on the EC and enable the keyboard.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:44:12 +0000 (19:44 -0700)]
rockchip: spi: Remove the explicit pinctrl setting
The correct pinctrl is handled automatically so we don't need to do it in
the driver. The exception is when we want to use a different chip select
(other than 0). But this isn't used at present.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:44:11 +0000 (19:44 -0700)]
rockchip: spi: Correct chip-enable code
At present there is an incorrect call to rkspi_enable_chip(). It should
be disabling the chip, not enabling it. Correct this and ensure that the
chip is disabled when releasing the bus.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:44:10 +0000 (19:44 -0700)]
rockchip: spi: Implement the delays
Some devices need delays before and after activiation. Implement these
features in the SPI driver so that we will be able to enable the Chrome
OS EC.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:44:09 +0000 (19:44 -0700)]
rockchip: gpio: Implement the get_function() method
Provide this method so that 'gpio status' works fully. It now shows
whether a pin is used for input, output or some other function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:44:08 +0000 (19:44 -0700)]
rockchip: gpio: Read the GPIO value correctly
This function should return 0 or 1, not a mask. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:44:07 +0000 (19:44 -0700)]
rockchip: pinctrl: Implement the get_gpio_mux() method
Implement this so that the GPIO command will be able to report whether a
GPIO is used for input or output.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:44:06 +0000 (19:44 -0700)]
rockchip: pinctrl: Reduce the size for SPL
This file has many features that are not needed by SPL. Use #ifdef to
remove the unused features and reduce the code size.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:44:05 +0000 (19:44 -0700)]
rockchip: clk: Make rkclk_get_clk() SoC-specific
The current method assumes that clocks are numbered from 0 and we can
determine a clock by its number. It is safer to use an ID in the clock's
platform data to avoid the situation where another clock is bound before
the one we expect.
Move the existing code into rk3036 since it still works there. Add a new
implementation for rk3288.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:44:04 +0000 (19:44 -0700)]
rockchip: spi: Correct the bus init code
Two of the init values are created locally so cannot be out of range.
The masking is unnecessary and in one case is incorrect. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:44:03 +0000 (19:44 -0700)]
rockchip: spi: Remember the last speed to avoid re-setting it
Rather than changing the clock to the same value on every transaction,
remember the last value and don't adjust the clock unless it is necessary.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:44:02 +0000 (19:44 -0700)]
rockchip: reset: Use the rk_clr/setreg() interface
Use this function in preference to the macro.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:44:01 +0000 (19:44 -0700)]
rockchip: sdram: Use the rk_clr/setreg() interface
Use this function in preference to the macro.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:44:00 +0000 (19:44 -0700)]
dm: clk: Add a simple version of clk_get_by_index()
This function adds quite a bit of code to SPL and we probably don't need
all the features in SPL. Add a simple version (for SPL only) to save space.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:59 +0000 (19:43 -0700)]
dm: power: Allow regulators to not implement all operations
Some regulators will not implement any operations (e.g. fixed regulators).
This is not an error, so allow the autoset process to continue when one
of these regulators is found.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:58 +0000 (19:43 -0700)]
dm: power: Tidy up debugging output and return values
The currect PMIC debugging is a little confusing. Adjust it so that it is
clear whether the operation succeeded or failed. Also, avoid creating a new
error return value when a perfectly good one is already available.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:57 +0000 (19:43 -0700)]
dm: core: Export uclass_find_device_by_of_offset()
It is sometimes useful to be able to find a device before probing it,
perhaps to set up some platform data for it. Allow finding by of_offset
also.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:56 +0000 (19:43 -0700)]
dm: pinctrl: Add a way for a GPIO driver to obtain a pin function
GPIO drivers want to be able to show if a pin is enabled for input, output,
or is being used by another function. Some drivers can easily find this
and the code is included in the driver. For some SoCs this is more complex.
Conceptually this should be handled by pinctrl rather than GPIO. Most
pinctrl drivers will have this feature anyway.
Add a method by which a GPIO driver can obtain the pin mux value given a
GPIO reference. This avoids repeating the code in two places.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:55 +0000 (19:43 -0700)]
dm: power: Allow regulators to be omitted from SPL
For some boards the pmic interface is useful but the regulator interface
(which comes with it) is too large. Allow them to be separated such that
SPL can decide which it needs.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:54 +0000 (19:43 -0700)]
spi: Correct device tree usage in spi_flash_decode_fdt()
This function currently searches the entire device tree for a node that
it thinks is relevant. But the node is known and is passed in. Correct the
code and enable it only with driver model, since only driver-model boards
will use it.
This avoids bringing in a large number of strings from fdtdec.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:53 +0000 (19:43 -0700)]
dm: i2c: Allow muxes to be enabled for SPL separately
Since I2C muxes are seldom needed in SPL, and the code for this increases
the size somewhat, add a separate option to enable I2C muxes for SPL.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:52 +0000 (19:43 -0700)]
cros_ec: Disable the Chrome OS EC in SPL
This is not used in SPL so don't allow it to be built there, even if I2C
is enabled in SPL.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:51 +0000 (19:43 -0700)]
gpio: Allow 's' as an abbreviation for 'status'
The 'gpio' command allows abbreviations for most subcommands. Allow them
for 'status' also.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:50 +0000 (19:43 -0700)]
rockchip: jerry: Drop unused options
To reduce the SPL image size, drop the LED features. Jerry does not have
an LED and we can leave out GPIO support also.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:49 +0000 (19:43 -0700)]
rockchip: Disable simple-bus in SPL for firefly-rk3288, jerry
This is not needed for booting, so drop it from SPL to save about 300 bytes.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:48 +0000 (19:43 -0700)]
rockchip: jerry: Enable the RK808 PMIC and regulator
Enable this PMIC and regulator, which is used on jerry.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:47 +0000 (19:43 -0700)]
rockchip: Move firefly and jerry to use the full pinctrl
Use the full pinctrl driver in U-Boot proper.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:46 +0000 (19:43 -0700)]
rockchip: pinctrl: Add a full pinctrl driver
We can make use of the device tree to configure pinctrl settings. Add this
support for the driver so we can use it in U-Boot proper.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:45 +0000 (19:43 -0700)]
rockchip: mmc: Update the driver to use the new clock ID
We can use the new clk_get_by_index() function to get the correct clock.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:44 +0000 (19:43 -0700)]
rockchip: spi: Avoid setting the pinctrl twice
If full pinctrl is enabled we don't need to manually set the pinctrl in the
driver. It will happen automatically. Adjust the code to suit - we will
still use manual mode in SPL.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:43 +0000 (19:43 -0700)]
rockchip: spi: Update the driver to use the new clock ID
We can use the new clk_get_by_index() function to get the correct clock.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:42 +0000 (19:43 -0700)]
rockchip: i2c: Update the driver to use the new clock ID
We can use the new clk_get_by_index() function to get the correct clock.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:41 +0000 (19:43 -0700)]
rockchip: clock: Add a function to find a clock by ID
The current approach of using uclass_get_device() is error-prone. Another
clock (for example a fixed-clock) may cause it to break. Add a function that
does a proper search.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:40 +0000 (19:43 -0700)]
rockchip: clk: Add a function to get a peripheral clock rate
It is useful to be able to read the rate of a peripheral clock. Add a
handler for that.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:39 +0000 (19:43 -0700)]
rockchip: clock: Rename the general clock variable to gclk_rate
The current name is confusing and a bit verbose. Rename it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:38 +0000 (19:43 -0700)]
rockchip: Use a separate clock ID for clocks
At present we use the same peripheral ID for clocks and pinctrl. While this
works it is probably better to use the device tree clock binding ID for
clocks. We can use the clk_get_by_index() function to find this.
Update the clock drivers and the code that uses them.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:37 +0000 (19:43 -0700)]
rockchip: jerry: Disable pmic-int-1 setup to avoid a hang
This hangs when activated (by probing the PMIC). Disable it for now until we
understand the root cause.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:36 +0000 (19:43 -0700)]
rockchip: Use pwrseq for MMC start-up on jerry
This is defined in the device tree in Linux. Copy over the settings so that
this can be used instead of hard-coding the reset line.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:35 +0000 (19:43 -0700)]
rockchip: Correct the defconfig order
This has got out of sequence somehow. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:34 +0000 (19:43 -0700)]
rockchip: mmc: Use a pwrseq device if available
Use the pwrseq uclass to find a suitable power sequence for the MMC device.
If this is enabled in the device tree, we will pick it up automatically.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:33 +0000 (19:43 -0700)]
rockchip: Convert the PMU IOMUX registers into an array
This is easier to deal with when using generic code since it allows us to
use a register index instead of naming each register.
Adjust it, adding an enum to improve readability.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:32 +0000 (19:43 -0700)]
rockchip: Avoid using MMC code when not booting from MMC
This saves some code space in SPL which is useful on jerry.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:31 +0000 (19:43 -0700)]
dm: Add a power sequencing uclass
Some devices need special sequences to be used when starting up. Add a
uclass for this. Drivers can be added to provide specific features as
needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:30 +0000 (19:43 -0700)]
power: Add support for RK808 regulators
Add regulator support for the RK808 PMIC. It integrated 4 BUCKs and 8 LDOs
all of which are supported by this driver.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:29 +0000 (19:43 -0700)]
power: Add base support for the RK808 PMIC
This Rockchip PMIC provides features suitable for battery-powered
applications. It is commonly used with Rockchip SoCs.
Add a driver which provides register access. The regulator driver will use
this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:28 +0000 (19:43 -0700)]
dts: Bring in pinctrl device tree binding
Add this binding file since we now use it in U-Boot.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:27 +0000 (19:43 -0700)]
dm: pmic: Add 'reg status' to show all regulators
It is convenient to be able to see the status of all regulators in a list.
Add this feature to the 'reg status' command.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:26 +0000 (19:43 -0700)]
dm: pinctrl: Add a function to parse PIN_CONFIG flags
Add a function which produces a flags word from a few common PIN_CONFIG
settings. This is useful for simple pinctrl drivers that don't need to worry
about drive strength, etc.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 22 Jan 2016 02:43:25 +0000 (19:43 -0700)]
dm: core: Don't set pinctrl for pinctrl devices
There is sort-of race condition when a pinctrl device is probed. The pinctrl
function is called which may end up using the same device as is being
probed. This results in operations being used before the device is actually
probed.
For now, disallow pinctrl operations on pinctrl devices while probing. An
alternative solution would be to move the operation to later in the
device_probe() function (for pinctrl devices only) but this needs more
thought.
Signed-off-by: Simon Glass <sjg@chromium.org>
Jeffy Chen [Thu, 14 Jan 2016 02:19:41 +0000 (10:19 +0800)]
rockchip: kylin: Store env in emmc
There's a 64K reserved area at the end of the first 4M.
Store env there, so we can use fastboot to flash it.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
Jeffy Chen [Thu, 14 Jan 2016 02:19:40 +0000 (10:19 +0800)]
rockchip: kylin: Check fastboot request
We will save boot mode flag in grf's os_reg[4], if fastboot
requested or fastboot key pressed, try to enter fastboot mode
at preboot stage.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
Jeffy Chen [Thu, 14 Jan 2016 02:19:38 +0000 (10:19 +0800)]
rockchip: kylin: Add default gpt partition table
Add default android gpt partition table for kylin board.
Use "gpt write mmc 0 $partitions" to apply.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Jeffy Chen [Thu, 14 Jan 2016 02:19:37 +0000 (10:19 +0800)]
rockchip: rk3036: Bind GPIO banks
Call dm_scan_fdt_node() in rk3036 pinctrl uclass binding.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Jeffy Chen [Thu, 14 Jan 2016 02:19:36 +0000 (10:19 +0800)]
ARM: bootm: Try to use relocated ramdisk
After boot_ramdisk_high(), ramdisk would be relocated to
initrd_start & initrd_end, so use them instead of rd_start & rd_end.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Thu, 21 Jan 2016 02:43:02 +0000 (19:43 -0700)]
dm: clk: Add support for decoding clocks from the device tree
Add a method which can locate a clock for a device, given its index. This
uses the normal device tree bindings to return the clock device and the
first argument which is normally used as a peripheral ID in U-Boot.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Tue, 19 Jan 2016 04:55:28 +0000 (13:55 +0900)]
clk: add fixed rate clock driver
This commit intends to implement "fixed-clock" as in Linux.
(drivers/clk/clk-fixed-rate.c in Linux)
If you need a very simple clock to just provide fixed clock rate
like a crystal oscillator, you do not have to write a new driver.
This driver can support it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tom Rini [Thu, 21 Jan 2016 16:49:49 +0000 (11:49 -0500)]
Merge git://git.denx.de/u-boot-dm
Tom Rini [Thu, 21 Jan 2016 14:12:22 +0000 (09:12 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-i2c; branch 'master' of git://git.denx.de/u-boot-nds32
Jelle van der Waa [Thu, 14 Jan 2016 13:06:26 +0000 (14:06 +0100)]
sunxi: Add support for the I2C controller which is part of the PRCM
Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
[hdegoede@redhat.com: Minor cleanups]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
applied with fixing 2 checkpatch warnings:
WARNING: please, no space before tabs
Signed-off-by: Heiko Schocher <hs@denx.de>
Hans de Goede [Thu, 14 Jan 2016 13:06:25 +0000 (14:06 +0100)]
i2c: mvtwsi: Fix mvtwsi not working on sun6i and newer sunxi SoCs
On sun6i and newer IFLG is a write-clear bit which is cleared by writing 1,
rather then a normal r/w bit which is cleared by writing 0.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
applied with fixing 3 checkpatch warnings
in drivers/i2c/mvtwsi.c:
WARNING: line over 80 characters
ERROR: code indent should use tabs where possible
WARNING: please, no spaces at the start of a line
Signed-off-by: Heiko Schocher <hs@denx.de>
rick [Tue, 19 Jan 2016 05:52:10 +0000 (13:52 +0800)]
nds32: Fix compile error.
Fix compile error with gcc 4.9.3
Signed-off-by: rick <rick@andestech.com>
Cc: Andes <uboot@andestech.com>
Simon Glass [Tue, 19 Jan 2016 02:52:28 +0000 (19:52 -0700)]
dm: video: test: Test that bitmap display works correctly
Add a test for the 'bmp' command. Test both the uncompressed and compressed
versions of the file, since they use different code paths.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Simon Glass [Tue, 19 Jan 2016 02:52:27 +0000 (19:52 -0700)]
dm: video: test: Add tests for rotated consoles
Test that text is displayed correctly when the console is rotated.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Simon Glass [Tue, 19 Jan 2016 02:52:26 +0000 (19:52 -0700)]
dm: video: test: Add tests for the video uclass
Add tests that check that the video console is working correcty. Also check
that text output produces the expected result. Test coverage includes
character output, wrapping and scrolling.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Simon Glass [Tue, 19 Jan 2016 02:52:25 +0000 (19:52 -0700)]
dm: video: sandbox: Convert sandbox to use driver model for video
Now that driver model support is available, convert sandbox over to use it.
We can remove a few of the special hooks that sandbox currently has.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Simon Glass [Tue, 19 Jan 2016 02:52:24 +0000 (19:52 -0700)]
sandbox: Move CONFIG_VIDEO_SANDBOX_SDL to Kconfig
Move this option to Kconfig. This is quite simple as only sandbox uses the
driver.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Simon Glass [Tue, 19 Jan 2016 02:52:23 +0000 (19:52 -0700)]
dm: stdio: video: Plumb the video uclass into stdio
Register video drivers with stdio so that they can be used for text output.
This needs to be done explicitly for now. At some point we should be able to
convert stdio itself to driver model and avoid this step.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Simon Glass [Tue, 19 Jan 2016 02:52:22 +0000 (19:52 -0700)]
dm: video: Implement the bmp command for driver model
This command can use the bitmap display code in the uclass. This is similar
to the code in lcd.c and cfb_console.c. These other copies will go away when
all boards are converted to use driver model for video.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Simon Glass [Tue, 19 Jan 2016 02:52:21 +0000 (19:52 -0700)]
dm: common: Add memory reservation for the video uclass
Before relocation we need to reserve memory for the video driver frame
buffers so that they can use this memory when they start up (after
relocation). Add a call to the uclass to permit this.
The current top and bottom of the region is stored in global_data so that
it can be checked post-relocation to ensure enough memory is available. No
video device should be probed before relocation.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Simon Glass [Tue, 19 Jan 2016 02:52:20 +0000 (19:52 -0700)]
common: Move LCD and video memory reservation together
These two functions are conceptually the same. Move them together in the
pre-relocation init.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Simon Glass [Tue, 19 Jan 2016 02:52:19 +0000 (19:52 -0700)]
dm: video: Add a driver for a rotated text console
Sometimes the console must be rotated. Add a driver which supports rotating
the text clockwise to 90, 180 and 270 degrees. This can support devices
where the display is rotated for mechanical reasons.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Simon Glass [Tue, 19 Jan 2016 02:52:18 +0000 (19:52 -0700)]
dm: video: Add a 'normal' text console driver
Most of the time we don't need to rotate the display so a simple font
blitting feature is enough for our purposes. Add a simple driver which
supports this function. It provides text output on the console using
the standard 8x16-pixel font.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Simon Glass [Tue, 19 Jan 2016 02:52:17 +0000 (19:52 -0700)]
dm: video: Add a uclass for the text console
The existing LCD/video interface suffers from conflating the bitmap display
with text output on that display. As a result the implementation is more
complex than it needs to me.
We can support multiple text console drivers. Create a separate uclass to
support this, with its own API.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Simon Glass [Tue, 19 Jan 2016 02:52:16 +0000 (19:52 -0700)]
dm: lcd: Avoid using the lcd.h header file with driver model
The LCD functions and definitions are not used with the driver model video
uclass. When all boards are converted over we can remove the file. For now,
use #ifdef to omit the contents.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Simon Glass [Tue, 19 Jan 2016 02:52:15 +0000 (19:52 -0700)]
dm: video: Add a video uclass
U-Boot has separate code for LCDs and 'video' devices. Both now use a
very similar API thanks to earlier work by Nikita Kiryanov. With the driver-
model conversion we should unify these into a single uclass.
Unfortunately there are different features supported by each. This
implementation provides for a common set of features which should serve
most purposes. The intent is to support:
- bitmap devices with 8, 16 and 32 bits per pixel
- text console wih white on black or vice versa
- rotated text console
- bitmap display (BMP format)
More can be added as additional boards are ported over to use driver model
for video.
The name 'video' is chosen for the uclass since it is more generic than LCD.
Another option would be 'display' but that would introduce a third concept
to U-Boot which seems like the wrong approach.
The existing LCD and video init functions are not needed now, so this uclass
makes no attempt to implement them.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Bin Meng [Thu, 14 Jan 2016 03:39:06 +0000 (19:39 -0800)]
arm: ls1021atwr: Enable driver model lpuart serial driver
Convert ls1021atwr_nor_lpuart to driver model support. As a start,
enable lpuart serial port driver.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alison Wang <alison.wang@nxp.com>
Tested-by: Alison Wang <alison.wang@nxp.com>
Acked-by: Simon Glass <sjg@chromium.org>
Bin Meng [Thu, 14 Jan 2016 03:39:05 +0000 (19:39 -0800)]
arm: ls1021atwr: Split off board device tree
Move /chosen node out of the board device tree.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Bin Meng [Thu, 14 Jan 2016 03:39:04 +0000 (19:39 -0800)]
serial: lpuart: Add driver model serial support
This adds driver model support to lpuart serial driver.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Tested-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Bin Meng [Thu, 14 Jan 2016 03:39:03 +0000 (19:39 -0800)]
serial: lpuart: Prepare the driver for DM conversion
Create internal routines which take lpuart's register base as
a parameter, in preparation for driver model conversion.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
Bin Meng [Thu, 14 Jan 2016 03:39:02 +0000 (19:39 -0800)]
serial: lpuart: Call local version of setbrg and putc directly
There is no need to go through serial driver subsystem, instead
call the driver's setbrg and putc routines directly.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
Bin Meng [Thu, 14 Jan 2016 03:39:01 +0000 (19:39 -0800)]
serial: lpuart: Fix several cosmetic issues
Clean up the driver codes a little bit, by:
- Use tab instead of space in the macro defines
- Use single line comment whenever possible
- Fix insertion of blank lines
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
Bin Meng [Thu, 14 Jan 2016 03:39:00 +0000 (19:39 -0800)]
serial: lpuart: Move CONFIG_FSL_LPUART to Kconfig
LPUART is seen on Freescale VF610 and QorIQ Layerscape devices.
Create a Kconfig option and move it to defconfig for all boards
that have this serial driver.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Simon Glass <sjg@chromium.org>
Bin Meng [Thu, 14 Jan 2016 03:38:59 +0000 (19:38 -0800)]
arm: ls1021atwr: Convert to driver model and enable serial support
Convert ls1021atwr_nor to driver model support. As a start, enable
ns16550 serial port driver.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Bin Meng [Thu, 14 Jan 2016 03:38:58 +0000 (19:38 -0800)]
Revert "fdt_support: Add multi-serial support for stdout fixup"
This reverts commit
3e303f748cf57fb23e8ec95ab7eac0074be50e2b.
The fix up in the /aliases node does not work under the following
scenarios:
- Not every non-DM serial driver was written to have a driver name
that conforms the format of "serial%d" or "eserial%d".
- With driver model serial, the stdio_devices[] stores the serial
device node name in the device tree.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Stephen Warren [Fri, 15 Jan 2016 18:15:31 +0000 (11:15 -0700)]
test/py: add a test for the sleep command
Execute "sleep", and validate that it sleeps for approximately the correct
amount of time.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Stephen Warren [Fri, 15 Jan 2016 18:15:30 +0000 (11:15 -0700)]
test/py: test the ums command
This test invokes the "ums" command in U-Boot, and validates that a USB
storage device is enumerated on the test host system, and can be read
from.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Stephen Warren [Fri, 15 Jan 2016 18:15:29 +0000 (11:15 -0700)]
test/py: test the shell if command
Migrate all most tests from command_ut.c into the Python test system.
This allows the tests to be run against any U-Boot binary that supports
the if command (i.e. where hush is enabled) without requiring that
binary to be permanently bloated with the code from command_ut.
Some tests in command_ut.c can only be executed from C code, since they
test internal (more unit-level) features of various U-Boot APIs. The
migrated tests can all operate directly from the U-Boot console.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Stephen Warren [Fri, 15 Jan 2016 18:15:28 +0000 (11:15 -0700)]
test/py: add test of basic shell functionality
This tests whether the following features of the U-Boot shell:
- Execution of a directly entered command.
- Compound commands (; delimiter).
- Quoting of arguments containing spaces.
- Executing commands from environment variables.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Stephen Warren [Fri, 15 Jan 2016 18:15:27 +0000 (11:15 -0700)]
test/py: test the md/mw commands
This tests whether md/mw work, and affect each-other.
Command repeat is also tested.
test/cmd_repeat.sh is removed, since the new Python-based test does
everything it used to.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Stephen Warren [Fri, 15 Jan 2016 18:15:26 +0000 (11:15 -0700)]
test/py: add test of setenv/printenv/echo
This tests basic environment variable functionality.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Stephen Warren [Fri, 15 Jan 2016 18:15:25 +0000 (11:15 -0700)]
test/py: test that sandbox exits when asked
Test the sandbox port's implementation of the reset command and SIGHUP
handling. These should both cause the U-Boot process to exit gracefully.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Stephen Warren [Fri, 15 Jan 2016 18:15:24 +0000 (11:15 -0700)]
test/py: Implement pytest infrastructure
This tool aims to test U-Boot by executing U-Boot shell commands using the
console interface. A single top-level script exists to execute or attach
to the U-Boot console, run the entire script of tests against it, and
summarize the results. Advantages of this approach are:
- Testing is performed in the same way a user or script would interact
with U-Boot; there can be no disconnect.
- There is no need to write or embed test-related code into U-Boot itself.
It is asserted that writing test-related code in Python is simpler and
more flexible that writing it all in C.
- It is reasonably simple to interact with U-Boot in this way.
A few simple tests are provided as examples. Soon, we should convert as
many as possible of the other tests in test/* and test/cmd_ut.c too.
The hook scripts, relay control utilities, and udev rules I use for my
own HW setup are published at https://github.com/swarren/uboot-test-hooks.
See README.md for more details!
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org> #v3
Mateusz Kulikowski [Thu, 14 Jan 2016 19:37:41 +0000 (20:37 +0100)]
patman: Add --thread option
Add option to create threaded series of patches.
With it, it will be possible to create patch threads like this:
[PATCH 0/10] Add support for time travel
[PATCH 1/10] Add Flux Capacitor driver
[PATCH 2/10] Add Mr. Fusion driver
(...)
Internally it will call git send-email with --thread option
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Masahiro Yamada [Wed, 13 Jan 2016 04:16:12 +0000 (13:16 +0900)]
clk: add API to enable clock
The most basic thing for clock is to enable it, but it is missing
in this uclass.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
Masahiro Yamada [Wed, 13 Jan 2016 04:16:10 +0000 (13:16 +0900)]
clk: add static qualifier to local functions
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
Masahiro Yamada [Wed, 13 Jan 2016 04:16:09 +0000 (13:16 +0900)]
clk: add needed include and declaration to include/clk.h
This header uses ulong, so it needs to include <linux/types.h>.
Likewise, "struct udevice" must be declared before it is used.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
Masahiro Yamada [Wed, 13 Jan 2016 04:16:08 +0000 (13:16 +0900)]
clk: fix comments in include/clk.h
The comment about get_periph_rate() is the same as that of
set_periph_rate().
I am fixing typos here and there while I am in this file.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
Masahiro Yamada [Tue, 12 Jan 2016 07:36:38 +0000 (16:36 +0900)]
clk: move Kconfig options into sub-menu
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 7 Jan 2016 22:16:08 +0000 (15:16 -0700)]
usb: Define USB_MAX_STOR_DEV in only one place
We can define this in the header file and use it in usb_storage.c. There is
no need to define it twice. Remove the #define from usb_storage.c.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>