Daniel Wagner [Tue, 12 Feb 2013 09:19:41 +0000 (10:19 +0100)]
iptables: Do not pass table into dump_match() and dump_target()
Daniel Wagner [Tue, 12 Feb 2013 09:19:40 +0000 (10:19 +0100)]
iptables: Get rid of the iterator macro
Instead implement the iterator loop directly. Since both dump_entry()
and add_entry() have calculated 'builtin' and 'offset' let's pass in
them in as well.
In the next step we are able to remove also the table argument
which will allow us to unify the parsing the table we get
from IPT_SO_GET_ENTRIES and the table we will pass in to the kernel
via IPT_SO_SET_REPLACE.
Daniel Wagner [Tue, 12 Feb 2013 09:19:39 +0000 (10:19 +0100)]
iptables: Clear global parser flags
That allows the parser to be reentrantable.
Daniel Wagner [Tue, 12 Feb 2013 09:19:38 +0000 (10:19 +0100)]
iptables: Make string arguments const
Daniel Wagner [Tue, 12 Feb 2013 09:19:37 +0000 (10:19 +0100)]
iptables: Add some documentation
These are some random notes but should give the next person to debug
iptables some introduction.
Daniel Wagner [Tue, 12 Feb 2013 09:19:36 +0000 (10:19 +0100)]
test-iptables: Add unit test for iptables
Marcel Holtmann [Mon, 11 Feb 2013 19:19:10 +0000 (20:19 +0100)]
gdbus: Don't call property changed callback during client init
When the client uses ObjectManager to init properties, do not call
property changed callbacks. They should only be called once the proxy
added has been successfully signaled since the proxy itself provides
a full copy of available properties.
Patrik Flykt [Mon, 11 Feb 2013 07:26:35 +0000 (09:26 +0200)]
gdhcp: DHCP server IP address is stored in host order
This change affects unicasted DHCP renew and release messages.
A DHCP server receiving packets via a raw socket will get all
packets destined to port 67. If the DHCP server checks the
intended server IP address, the request will fail. If the server
does not care about the IP address being used, it will send a
reply. The reply is not recognized by ConnMan since it is coming
from another IP address than what it was sent to. ConnMan will
retry quite a few times, but eventually settle down and use the
address even without a proper response from the server.
Patrik Flykt [Mon, 4 Feb 2013 14:37:57 +0000 (16:37 +0200)]
ipconfig: Use proper address structure when appending IPv4 info
Patrik Flykt [Mon, 4 Feb 2013 14:37:56 +0000 (16:37 +0200)]
service: Validate the IP addresses before use
When setting IP address information via D-Bus, first create a new ipconfig
structure to hold the values. If the values were validated correctly, update
the service ipconfig structure with the new values. In order to achieve
this, refactor the existing code.
Fixes BMC#25930
Patrik Flykt [Mon, 4 Feb 2013 14:37:55 +0000 (16:37 +0200)]
service: Factor out ipconfig creation
The caller has to set the created ipconfig into its data structures.
Patrik Flykt [Mon, 4 Feb 2013 14:37:54 +0000 (16:37 +0200)]
ipconfig: Add checks for invalid IPv4/IPv6 addresses
Also fine tune returned errors.
Tomasz Bursztyka [Mon, 4 Feb 2013 08:48:53 +0000 (10:48 +0200)]
test: Fix simple-agent so it can run even if service files are missing
Fixes BMC#25964
Jukka Rissanen [Fri, 1 Feb 2013 10:21:06 +0000 (12:21 +0200)]
ipconfig: Do not overwrite gateway address
If we have already received gateway address via newroute rtnl
message, then do not overwrite it when receiving newaddr message.
Fixes BMC#25931
Johan Hedberg [Fri, 1 Feb 2013 15:03:22 +0000 (09:03 -0600)]
gdbus: Fix unpublished interface signal emission
If we haven't published an interface yet (i.e. it's in the data->added
list), we should just ignore any property changed indications as the
values for the properties will anyway be part of the InterfacesAdded
signal.
Marcel Holtmann [Fri, 1 Feb 2013 08:10:47 +0000 (09:10 +0100)]
Release 1.11
Patrik Flykt [Wed, 30 Jan 2013 12:09:57 +0000 (14:09 +0200)]
dundee: Set network available is needed only when scanning
Patrik Flykt [Wed, 30 Jan 2013 12:09:41 +0000 (14:09 +0200)]
ofono: Set network available is needed only when scanning
Patrik Flykt [Wed, 30 Jan 2013 12:08:33 +0000 (14:08 +0200)]
ethernet: Set network available is needed only when scanning
Patrik Flykt [Wed, 30 Jan 2013 12:49:44 +0000 (14:49 +0200)]
README: Add kernel options needed for tethering
Patrik Flykt [Tue, 29 Jan 2013 08:24:52 +0000 (10:24 +0200)]
TODO: Update TODO with Bluez 4.x removal task
Patrik Flykt [Mon, 28 Jan 2013 15:44:46 +0000 (17:44 +0200)]
bluetooth: Implement tethering for the Bluez 5 bluetooth plugin
Patrik Flykt [Mon, 28 Jan 2013 15:44:45 +0000 (17:44 +0200)]
technology: Support multiple technology drivers
As tethering is enabled on the technology level, both the bluetooth and
the bluetooth_legacy plugin need to register technology drivers for
CONNMAN_SERVICE_TYPE_BLUETOOTH. Modify the technology code to create
a list of registered technology drivers instead of a single technology
driver pointer.
Patrik Flykt [Mon, 28 Jan 2013 15:44:44 +0000 (17:44 +0200)]
bluetooth: Connect and disconnect a PAN NAP network
Implement connect and disconnect functionality for a ConnMan network.
On network creation check the connection status of the Bluez 5 Network1
object and set the network to connected when needed.
Patrik Flykt [Mon, 28 Jan 2013 15:44:43 +0000 (17:44 +0200)]
service: Must not return NULL with a synchronous GDBus method call
If NULL is returned, GDBus will call the registered function repeatedly.
Patrik Flykt [Mon, 28 Jan 2013 15:44:42 +0000 (17:44 +0200)]
bluetooth: Expose Bluez 5 org.bluez.Network1 objects as networks
Create ConnMan networks for those Bluez 5 org.bluez.Network1/Device1
objects that support PAN NAP. A network is created or removed in response
to the Network1/Device1 being created or when the Device1 object's UUID
changed.
The ConnMan network struct is added to and removed from the ConnMan
device when the device is created, enabled or disabled.
Patrik Flykt [Mon, 28 Jan 2013 15:44:41 +0000 (17:44 +0200)]
network: Allow more than one network driver register the same type
Allowing more than one network driver to register the same network type
requires the network driver to properly identify which networks belong
to it in the network driver probe function.
Patrik Flykt [Mon, 28 Jan 2013 15:44:40 +0000 (17:44 +0200)]
bluetooth_legacy: Check network in probe function
The network probed can belong to the new Bluez 5 bluetooth plugin or to
this plugin. Check if this plugin created the network and proceed
accordingly.
Patrik Flykt [Mon, 28 Jan 2013 15:44:39 +0000 (17:44 +0200)]
bluetooth: Keep track of Bluez 5 org.bluez.Network1 objects
Set up functions monitoring Bluez 5 org.bluez.Network1 objects being
added and removed. Add a GDBusProxy for the org.bluez.Device1 object
that corresponds to the Network1 object. Set up functions monitoring
Network1 'Connected' and Device1 'UUID' properties.
Patrik Flykt [Mon, 28 Jan 2013 15:44:38 +0000 (17:44 +0200)]
bluetooth: Expose Bluez 5 adapters as ConnMan devices
Set up functions monitoring Bluez 5 objects being added and removed using
GDBusProxy. When an adapter appears, create a new device for it and set up
a watch function for the adapter's 'Powered' property.
Keep the adapter 'Powered' property in sync with the device state and if
they differ reset the adapter to the device state. Also update the Bluez 5
adapter 'Powered' property when the device is enabled or disabled.
Patrik Flykt [Mon, 28 Jan 2013 15:44:37 +0000 (17:44 +0200)]
technology: Enable/disable individual devices also with rfkill
In order to keep ConnMan devices in sync with Bluz 5 adapters, the
individual devices need to be enabled/disabled also when
unblocking/blocking them with rfkill. Thus enable devices after
unblocking and disable devices before blocking with rfkill.
Patrik Flykt [Mon, 28 Jan 2013 15:44:36 +0000 (17:44 +0200)]
bluetooth: Register technology driver
Patrik Flykt [Mon, 28 Jan 2013 15:44:35 +0000 (17:44 +0200)]
bluetooth: Add new bluetooth plugin
Patrik Flykt [Mon, 28 Jan 2013 15:44:34 +0000 (17:44 +0200)]
bluetooth: Rename bluetooth plugin to bluetooth_legacy
Set the plugin priority to CONNMAN_PLUGIN_PRIORITY_LOW and the technology
priority to -10. Update strings to "bluetooth_legacy" and use ordinary
string instead of ident.
Patrik Flykt [Mon, 28 Jan 2013 15:44:33 +0000 (17:44 +0200)]
technology: Check technology driver probe function before calling
Patrik Flykt [Mon, 28 Jan 2013 15:44:32 +0000 (17:44 +0200)]
technology: Remove technology driver by pointer
Compare the technology driver pointer to the driver being unregistered
as the function is supposed to remove only the given driver.
Also check if the driver has a remove function before calling it.
Patrik Flykt [Mon, 28 Jan 2013 15:44:31 +0000 (17:44 +0200)]
technology: Remove unnecessary comparison and goto
Patrik Flykt [Mon, 28 Jan 2013 15:44:30 +0000 (17:44 +0200)]
ofono: Use ordinary string instead of ident
The string is only used for debugging purposes.
Patrik Flykt [Mon, 28 Jan 2013 15:44:29 +0000 (17:44 +0200)]
dundee: Use ordinary string instead of ident
The string is only used for debugging purposes.
Patrik Flykt [Tue, 29 Jan 2013 09:43:00 +0000 (11:43 +0200)]
network: Unset driver on failed match
Tomasz Bursztyka [Mon, 28 Jan 2013 13:43:11 +0000 (15:43 +0200)]
gresolv: Destroy query at the relevant place when parsing the response
parse_response() will eventually call sort_and_return_results() which in turn
will call the result function. But the result function might cancel the gresolv.
At that point all queries belonging to this gresolv are destroyed. Returning back
to parse_response(), it calls again destroy_query() on an already destroyed one.
Thus leading to a crash.
Same issue with query_timeout()
Reported by Daniel Wagner
Tomasz Bursztyka [Mon, 21 Jan 2013 10:46:19 +0000 (12:46 +0200)]
service: Notify leaving online state when downgrading it to ready
Fixes BMC#25862
Jukka Rissanen [Mon, 21 Jan 2013 12:39:31 +0000 (14:39 +0200)]
ipconfig: IPv6 was enabled too early
When enabling IPv6 ipconfig, we enable kernel IPv6 support too early.
The ipconfig might get unreffed which will disable ipconfig and
thus disable kernel IPv6 support. By moving kernel IPv6 enabling
after the ipconfig unref call, we make sure that IPv6 kernel support
is properly enabled.
This is related to fix in commit
d479904ecaa2bd9
Marcel Holtmann [Mon, 21 Jan 2013 02:25:12 +0000 (18:25 -0800)]
gdbus: Check for valid path before handling properties
Jukka Rissanen [Fri, 18 Jan 2013 12:11:32 +0000 (14:11 +0200)]
dnsproxy: DNS response answer count was incorrectly set
We set the answer count in host byte order instead of network
byte order when sending cached AAAA record. This problem is only
seen in special case when an AAAA record is generated by us when
there is IPv4 address in cache but no IPv6 address for the host.
Tomasz Bursztyka [Wed, 16 Jan 2013 10:57:14 +0000 (12:57 +0200)]
network: Do not report any error when removing a connecting network
When connecting a network, if it's related technology is disabled, this network
will raise an error through the agent. Leading to a possible retry request from
the user, then to a crash if the user does so.
Thus, we prevent any error to be raised in such situation and silently disconnect
the connecting network instead.
Tomasz Bursztyka [Wed, 16 Jan 2013 10:57:13 +0000 (12:57 +0200)]
network: Move up code about set_connected() and set_disconnected
Jukka Rissanen [Tue, 15 Jan 2013 14:47:43 +0000 (16:47 +0200)]
service: Trigger autoconnect when AutoConnect flag is enabled
Jukka Rissanen [Tue, 15 Jan 2013 14:11:26 +0000 (16:11 +0200)]
ipconfig: Do not disable IPv6 in lower up state
Disabling IPv6 in lower up causes problems in IPv6 connectivity.
The interface IPv6 status can stay in disabled state because of
races. So this patch reverts the commit
4ce90440a70abce7de537777
and lets service IPv6 state go to READY when we get an auto
configured address for the interface.
Fixes BMC#25929
Tomasz Bursztyka [Tue, 15 Jan 2013 08:20:44 +0000 (10:20 +0200)]
service: Update notifier state when relevant while getting ready
When getting 1 service to online, and disonnecting it: Manager state
stays at 'ready'. This is due to service updating the notifier about
its state 'ready' 2 times. Once when connecting: idle -> ready, and
once when disconnecting: online -> ready.
Tomasz Bursztyka [Tue, 15 Jan 2013 12:57:38 +0000 (14:57 +0200)]
agent: Keep track of the driver to unref user context relevantly
Fixes BMC#25884
Tomasz Bursztyka [Fri, 11 Jan 2013 12:37:05 +0000 (14:37 +0200)]
gweb: Make sure to destroy the lookup before calling any result function
Program received signal SIGSEGV, Segmentation fault.
Backtrace:
0 0x00000000004219fe in _debug (resolv=0x75f9a0, file=0x497267 "gweb/gresolv.c",
caller=0x497598 "destroy_lookup",
format=0x497278 "lookup %p id %d ipv4 %p ipv6 %p") at gweb/gresolv.c:136
1 0x0000000000421ac5 in destroy_lookup (lookup=0x760e40) at gweb/gresolv.c:154
2 0x00000000004224ce in sort_and_return_results (lookup=0x760e40) at gweb/gresolv.c:520
3 0x0000000000422597 in query_timeout (user_data=0x760510) at gweb/gresolv.c:542
4 0x00007ffff7b1b26b in g_timeout_dispatch (source=0x760ea0, callback=<optimized out>,
user_data=<optimized out>) at gmain.c:4095
5 0x00007ffff7b1a643 in g_main_dispatch (context=0x6f5110) at gmain.c:2784
6 g_main_context_dispatch (context=0x6f5110) at gmain.c:3288
7 0x00007ffff7b1a988 in g_main_context_iterate (dispatch=1, block=<optimized out>,
context=0x6f5110, self=<optimized out>) at gmain.c:3359
8 g_main_context_iterate (context=0x6f5110, block=<optimized out>, dispatch=1,
self=<optimized out>) at gmain.c:3296
9 0x00007ffff7b1ade5 in g_main_loop_run (loop=0x6f4fe0) at gmain.c:3553
10 0x0000000000442a5f in main (argc=1, argv=0x7fffffffdea8) at src/main.c:705
Reported by Daniel Wagner
Patrik Flykt [Tue, 8 Jan 2013 09:32:51 +0000 (11:32 +0200)]
gsupplicant: Return max SSIDs to scan given by wpa_supplicant
Although it seems wpa_supplicant can handle 4 SSIDs in version 0.7.x
and 16 starting with 0.8.x, in practise this does not work. Return the
value reported without relying on wpa_supplicant internals to handle
the situation. In order for hidden scans to work properly, the minimum
value needs to be 1.
Julien Massot [Tue, 8 Jan 2013 09:34:37 +0000 (10:34 +0100)]
build: Do not use deprecated AM_CONFIG_HEADER
The long-obsoleted AM_CONFIG_HEADER macro was removed in automake 1.13.
Use AC_CONFIG_HEADERS instead.
Forest Bond [Mon, 7 Jan 2013 14:24:55 +0000 (09:24 -0500)]
inet: Fix error handling when bridging interfaces
Functions that add and remove interfaces to and from bridges now return
an appropriate error code.
Forest Bond [Mon, 7 Jan 2013 14:24:26 +0000 (09:24 -0500)]
inet: Fix error handling when adding/removing routes
Functions that add and remove routes now return an appropriate error
code. EEXIST and ESRCH are ignored when adding and removing routes
(respectively) to reduce spurious error messages in the logs.
Patrik Flykt [Tue, 8 Jan 2013 11:57:03 +0000 (13:57 +0200)]
vpn-provider: Check if providers list is NULL before using it
Anderson Lizardo [Sun, 6 Jan 2013 00:47:46 +0000 (20:47 -0400)]
gdbus: Fix memory leak on properties_set()
The pointer returned by dbus_message_iter_get_signature() must be freed
with dbus_free().
Fixes this memory leak:
==1857== 16 bytes in 1 blocks are definitely lost in loss record 104 of
251
==1857== at 0x402BF52: realloc (in
/usr/lib/valgrind/vgpreload_memcheck-x86-linux.so)
==1857== by 0x415E286: dbus_realloc (in
/lib/i386-linux-gnu/libdbus-1.so.3.5.8)
==1857== by 0x415E70B: ??? (in
/lib/i386-linux-gnu/libdbus-1.so.3.5.8)
==1857== by 0x415F17B: ??? (in
/lib/i386-linux-gnu/libdbus-1.so.3.5.8)
==1857== by 0x414CB33: dbus_message_iter_get_signature (in
/lib/i386-linux-gnu/libdbus-1.so.3.5.8)
==1857== by 0x8053239: properties_set (object.c:899)
==1857== by 0x5FFFFF: ???
==1857==
Marcel Holtmann [Sat, 5 Jan 2013 04:28:07 +0000 (20:28 -0800)]
gdbus: Check signature of property value before calling setter
Patrik Flykt [Fri, 14 Dec 2012 13:58:20 +0000 (15:58 +0200)]
TODO: Remove the storage migration task
Patrik Flykt [Fri, 4 Jan 2013 11:12:53 +0000 (13:12 +0200)]
storage: Remove storage migration code
Patrik Flykt [Tue, 11 Dec 2012 14:36:28 +0000 (16:36 +0200)]
TODO: Remove WiMAX removal task
Patrik Flykt [Tue, 11 Dec 2012 14:36:27 +0000 (16:36 +0200)]
doc: Remove WiMAX info from documentation
Patrik Flykt [Tue, 11 Dec 2012 14:36:26 +0000 (16:36 +0200)]
core: Remove WiMAX definitions from code
Patrik Flykt [Tue, 11 Dec 2012 14:36:25 +0000 (16:36 +0200)]
plugins: Remove WiMAX plugin files
Patrik Flykt [Tue, 11 Dec 2012 14:36:24 +0000 (16:36 +0200)]
build: Remove WiMAX from configuration options
Lucas De Marchi [Fri, 4 Jan 2013 03:33:44 +0000 (01:33 -0200)]
gdbus: Don't include just added interfaces in GetManagedObjects
If we received a call to ObjectManager.GetManagedObject we should not
include in the response the interfaces in data->added. This is because
it's not guaranteed that those interfaces will trigger an
InterfacesAdded signal, which is the case if the interface is removed in
the same mainloop iteration.
Lucas De Marchi [Fri, 4 Jan 2013 01:21:04 +0000 (23:21 -0200)]
gdbus: Simplify generated introspection
The generated introspection is not supposed to be read as is by human,
so there's no point in printing the indentation or writing more code to
use auto-close tags.
If it's desired to read the raw xml file, user can always use other
tools to transform the output such as "xmllint --format".
This also fixes a missing </property> when property is deprecated.
Tomasz Bursztyka [Wed, 2 Jan 2013 13:57:34 +0000 (15:57 +0200)]
test: Fix simple-agent so it registers the right path
Marcel Holtmann [Wed, 2 Jan 2013 23:58:37 +0000 (15:58 -0800)]
TODO: Add entry for BlueZ 5.x task
Marcel Holtmann [Wed, 2 Jan 2013 15:35:53 +0000 (07:35 -0800)]
gdbus: Hold client reference during get name owner reply
Luiz Augusto von Dentz [Fri, 28 Dec 2012 12:51:03 +0000 (14:51 +0200)]
gdbus: Call check_signals when sending signals with g_dbus_send_message
If message passed to g_dbus_send_message is a signal verify if it is a
valid and there really exists an interface with respective signal name.
Luiz Augusto von Dentz [Fri, 28 Dec 2012 12:51:02 +0000 (14:51 +0200)]
gdbus: Check if the interface being registered is valid
This prevent registering interfaces that are empty or have all members
marked as experiemental.
Luiz Augusto von Dentz [Fri, 28 Dec 2012 12:51:01 +0000 (14:51 +0200)]
gdbus: Introduce G_DBUS_PROPERTY_FLAG_EXPERIMENTAL
This flag can be used to mark properties as experimental, marked
properties are disabled by default and can be enabled by setting
G_DBUS_FLAG_ENABLE_EXPERIMENTAL using g_dbus_set_flags.
Luiz Augusto von Dentz [Fri, 28 Dec 2012 12:51:00 +0000 (14:51 +0200)]
gdbus: Introduce G_DBUS_SIGNAL_FLAG_EXPERIMENTAL
This flag can be used to mark signals as experimental, marked
signals are disabled by default and can be enabled by setting
G_DBUS_FLAG_ENABLE_EXPERIMENTAL using g_dbus_set_flags.
Luiz Augusto von Dentz [Fri, 28 Dec 2012 12:50:59 +0000 (14:50 +0200)]
gdbus: Introduce G_DBUS_METHOD_FLAG_EXPERIMENTAL
This flag can be used to mark methods as experimental, marked
methods are disable by default and can be enabled by setting
G_DBUS_FLAG_ENABLE_EXPERIMENTAL using g_dbus_set_flags.
Marcel Holtmann [Sun, 30 Dec 2012 08:58:04 +0000 (00:58 -0800)]
gdbus: Include changed properties only once per signal
Marcel Holtmann [Sat, 29 Dec 2012 21:42:51 +0000 (13:42 -0800)]
gdbus: Update properties on D-Bus client re-connections
Marcel Holtmann [Sat, 29 Dec 2012 21:24:17 +0000 (13:24 -0800)]
gdbus: Add function to manually refresh properties
Marcel Holtmann [Sat, 29 Dec 2012 20:29:50 +0000 (12:29 -0800)]
gdbus: Add support for proxy property change notifications
Marcel Holtmann [Sat, 29 Dec 2012 20:27:33 +0000 (12:27 -0800)]
gdbus: Fix handling of client connect/disconnect signals
Marcel Holtmann [Sat, 29 Dec 2012 19:57:05 +0000 (11:57 -0800)]
gdbus: Protect standalone proxy creation with client reference
Marcel Holtmann [Fri, 28 Dec 2012 05:30:06 +0000 (21:30 -0800)]
gdbus: Use object manager only if callback functions are set
Marcel Holtmann [Fri, 28 Dec 2012 05:21:16 +0000 (21:21 -0800)]
gdbus: Use client service name and not hardcoded org.bluez
Marcel Holtmann [Fri, 28 Dec 2012 05:19:31 +0000 (21:19 -0800)]
gdbus: Add support for creating D-Bus proxies without object manager
Marcel Holtmann [Sun, 23 Dec 2012 02:05:05 +0000 (18:05 -0800)]
Release 1.10
Marcel Holtmann [Sun, 23 Dec 2012 01:38:39 +0000 (17:38 -0800)]
build: Fix Daniel's commits without name
Marcel Holtmann [Sun, 23 Dec 2012 01:35:25 +0000 (17:35 -0800)]
build: Fix Flavio's name mapping to email address
Marcel Holtmann [Sat, 22 Dec 2012 20:14:30 +0000 (12:14 -0800)]
build: Add vpn/net.connman.vpn.service to .gitignore
Marcel Holtmann [Sat, 22 Dec 2012 20:05:59 +0000 (12:05 -0800)]
gdbus: Avoid using g_ptr_array_new_full convenience function
The g_ptr_array_new_full function only got introduced with GLib 2.30
and to avoid requiring a newer GLib use g_ptr_array_set_free_func instead.
Patrik Flykt [Fri, 21 Dec 2012 12:10:33 +0000 (14:10 +0200)]
session-policy-local: Check policy being non-NULL before using
When running unit/test-session the following happens if SELinux is disabled but
--enable-session-policy-local is specified for ./configure:
connmand[6468]: src/session.c:__connman_session_create() owner :1.269
connmand[6468]: src/dbus.c:selinux_get_context_reply() Failed to retrieve SELinux context
connmand[6468]: src/session.c:session_create_cb() session 0x2388dc0 config (nil)
connmand[6468]: Aborting (signal 11) [src/connmand]
connmand[6468]: ++++++++ backtrace ++++++++
connmand[6468]: #0 0x7f5b2b8184f0 in /lib/x86_64-linux-gnu/libc.so.6
connmand[6468]: #1 0x4379b4 in policy_local_destroy() at plugins/session_policy_local.c:245
connmand[6468]: #2 0x46703f in free_session() at src/session.c:258
connmand[6468]: #3 0x468603 in session_create_cb() at src/session.c:1710
connmand[6468]: #4 0x4377e7 in selinux_context_reply() at plugins/session_policy_local.c:201
connmand[6468]: #5 0x461366 in selinux_get_context_reply() at src/dbus.c:475
connmand[6468]: #6 0x7f5b2c66b1ca in /lib/x86_64-linux-gnu/libdbus-1.so.3
connmand[6468]: #7 0x7f5b2c66e293 in /lib/x86_64-linux-gnu/libdbus-1.so.3
connmand[6468]: #8 0x410aa8 in message_dispatch() at gdbus/mainloop.c:76
connmand[6468]: #9 0x7f5b2c8eeeeb in /lib/x86_64-linux-gnu/libglib-2.0.so.0
connmand[6468]: #10 0x7f5b2c8ee355 in /lib/x86_64-linux-gnu/libglib-2.0.so.0
connmand[6468]: #11 0x7f5b2c8ee688 in /lib/x86_64-linux-gnu/libglib-2.0.so.0
connmand[6468]: #12 0x7f5b2c8eea82 in /lib/x86_64-linux-gnu/libglib-2.0.so.0
connmand[6468]: #13 0x410592 in main() at src/main.c:672
connmand[6468]: #14 0x7f5b2b804ead in /lib/x86_64-linux-gnu/libc.so.6
connmand[6468]: +++++++++++++++++++++++++++
Daniel Wagner [Wed, 19 Dec 2012 14:29:17 +0000 (15:29 +0100)]
gweb: Use glib memory functions
Use for all memory allocation/dealocation operation the glib
functions. This allows us to use g_mem_profile().
Daniel Wagner [Wed, 19 Dec 2012 14:29:16 +0000 (15:29 +0100)]
gdhcp: Use glib memory functions
Use for all memory allocation/dealocation operation the glib
functions. This allows us to use g_mem_profile().
Daniel Wagner [Wed, 19 Dec 2012 14:29:15 +0000 (15:29 +0100)]
core: Use glib memory functions
Use for all memory allocation/dealocation operation the glib
functions. This allows us to use g_mem_profile().
Marcel Holtmann [Wed, 19 Dec 2012 02:49:33 +0000 (03:49 +0100)]
build: Compile support for new D-Bus client helpers
Marcel Holtmann [Tue, 18 Dec 2012 04:27:09 +0000 (05:27 +0100)]
gdbus: Increase the method call timeout to 5 minutes
Marcel Holtmann [Tue, 18 Dec 2012 04:09:59 +0000 (05:09 +0100)]
gdbus: Add helper for sending async error replies
Marcel Holtmann [Sun, 16 Dec 2012 00:16:28 +0000 (01:16 +0100)]
gdbus: Fix race condition with creating duplicate client proxies
Marcel Holtmann [Sun, 16 Dec 2012 00:06:33 +0000 (01:06 +0100)]
gdbus: Fix issue with unref of client while parsing interfaces
Marcel Holtmann [Sat, 15 Dec 2012 22:34:51 +0000 (23:34 +0100)]
gdbus: Fix issue with unref of client in connect handler