review.tizen.org Git - platform/kernel/linux-starfive.git/log

powerpc/process: Remove unnecessary #ifdef CONFIG_FUNCTION_GRAPH_TRACER

ftrace_graph_ret_addr() is always defined and returns 'ip' when
CONFIG_FUNCTION GRAPH_TRACER is not set.

So the #ifdef is not needed, remove it.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9d11143d4e27ba8274369a926968756917584868.1597643153.git.christophe.leroy@csgroup.eu

powerpc/uaccess: Add pre-update addressing to __get_user_asm() and __put_user_asm()

Enable pre-update addressing mode in __get_user_asm() and __put_user_asm()

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/13041c7df39e89ddf574ea0cdc6dedfdd9734140.1597235091.git.christophe.leroy@csgroup.eu

powerpc/uaccess: Use flexible addressing with __put_user()/__get_user()

At the time being, __put_user()/__get_user() and friends only use
D-form addressing, with 0 offset. Ex:

lwz reg1, 0(reg2)

Give the compiler the opportunity to use other adressing modes
whenever possible, to get more optimised code.

Hereunder is a small exemple:

struct test {
u32 item1;
u16 item2;
u8 item3;
u64 item4;
};

int set_test_user(struct test __user *from, struct test __user *to)
{
int err;
u32 item1;
u16 item2;
u8 item3;
u64 item4;

err = __get_user(item1, &from->item1);
err |= __get_user(item2, &from->item2);
err |= __get_user(item3, &from->item3);
err |= __get_user(item4, &from->item4);

err |= __put_user(item1, &to->item1);
err |= __put_user(item2, &to->item2);
err |= __put_user(item3, &to->item3);
err |= __put_user(item4, &to->item4);

return err;
}

Before the patch:

00000df0 <set_test_user>:
df0: 94 21 ff f0 stwu    r1,-16(r1)
df4: 39 40 00 00 li      r10,0
df8: 93 c1 00 08 stw     r30,8(r1)
dfc: 93 e1 00 0c stw     r31,12(r1)
e00: 7d 49 53 78 mr      r9,r10
e04: 80 a3 00 00 lwz     r5,0(r3)
e08: 38 e3 00 04 addi    r7,r3,4
e0c: 7d 46 53 78 mr      r6,r10
e10: a0 e7 00 00 lhz     r7,0(r7)
e14: 7d 29 33 78 or      r9,r9,r6
e18: 39 03 00 06 addi    r8,r3,6
e1c: 7d 46 53 78 mr      r6,r10
e20: 89 08 00 00 lbz     r8,0(r8)
e24: 7d 29 33 78 or      r9,r9,r6
e28: 38 63 00 08 addi    r3,r3,8
e2c: 7d 46 53 78 mr      r6,r10
e30: 83 c3 00 00 lwz     r30,0(r3)
e34: 83 e3 00 04 lwz     r31,4(r3)
e38: 7d 29 33 78 or      r9,r9,r6
e3c: 7d 43 53 78 mr      r3,r10
e40: 90 a4 00 00 stw     r5,0(r4)
e44: 7d 29 1b 78 or      r9,r9,r3
e48: 38 c4 00 04 addi    r6,r4,4
e4c: 7d 43 53 78 mr      r3,r10
e50: b0 e6 00 00 sth     r7,0(r6)
e54: 7d 29 1b 78 or      r9,r9,r3
e58: 38 e4 00 06 addi    r7,r4,6
e5c: 7d 43 53 78 mr      r3,r10
e60: 99 07 00 00 stb     r8,0(r7)
e64: 7d 23 1b 78 or      r3,r9,r3
e68: 38 84 00 08 addi    r4,r4,8
e6c: 93 c4 00 00 stw     r30,0(r4)
e70: 93 e4 00 04 stw     r31,4(r4)
e74: 7c 63 53 78 or      r3,r3,r10
e78: 83 c1 00 08 lwz     r30,8(r1)
e7c: 83 e1 00 0c lwz     r31,12(r1)
e80: 38 21 00 10 addi    r1,r1,16
e84: 4e 80 00 20 blr

After the patch:

00000dbc <set_test_user>:
dbc: 39 40 00 00 li      r10,0
dc0: 7d 49 53 78 mr      r9,r10
dc4: 80 03 00 00 lwz     r0,0(r3)
dc8: 7d 48 53 78 mr      r8,r10
dcc: a1 63 00 04 lhz     r11,4(r3)
dd0: 7d 29 43 78 or      r9,r9,r8
dd4: 7d 48 53 78 mr      r8,r10
dd8: 88 a3 00 06 lbz     r5,6(r3)
ddc: 7d 29 43 78 or      r9,r9,r8
de0: 7d 48 53 78 mr      r8,r10
de4: 80 c3 00 08 lwz     r6,8(r3)
de8: 80 e3 00 0c lwz     r7,12(r3)
dec: 7d 29 43 78 or      r9,r9,r8
df0: 7d 43 53 78 mr      r3,r10
df4: 90 04 00 00 stw     r0,0(r4)
df8: 7d 29 1b 78 or      r9,r9,r3
dfc: 7d 43 53 78 mr      r3,r10
e00: b1 64 00 04 sth     r11,4(r4)
e04: 7d 29 1b 78 or      r9,r9,r3
e08: 7d 43 53 78 mr      r3,r10
e0c: 98 a4 00 06 stb     r5,6(r4)
e10: 7d 23 1b 78 or      r3,r9,r3
e14: 90 c4 00 08 stw     r6,8(r4)
e18: 90 e4 00 0c stw     r7,12(r4)
e1c: 7c 63 53 78 or      r3,r3,r10
e20: 4e 80 00 20 blr

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c27bc4e598daf3bbb225de7a1f5c52121cf1e279.1597235091.git.christophe.leroy@csgroup.eu

powerpc: Remove flush_instruction_cache() on 8xx

flush_instruction_cache() is never used on 8xx, remove it.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/245cabd8f291facac8c8c5fd370e361a69e02860.1597384145.git.christophe.leroy@csgroup.eu

powerpc: unrel_branch_check.sh: enable the use of llvm-objdump v9, 10 or 11

Currently, using llvm-objtool, this script just silently succeeds without
actually do the intended checking. So this updates it to work properly.

Firstly, llvm-objdump does not add target symbol names to the end
of branches in its asm output, so we have to drop the branch to
__start_initialization_multiplatform using its address.

Secondly, v9 and 10 specify branch targets as .+<offset>, so we convert
those to actual addresses.

Thirdly, v10 and 11 error out on a vmlinux if given the -R option
complaining that it is "not a dynamic object". The -R does not make
any difference to the asm output, so remove it.

Lastly, v11 produces asm that is very similar to Gnu objtool (at least
as far as branches are concerned), so no further changes are necessary
to make it work.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200812081036.7969-3-sfr@canb.auug.org.au

powerpc: unrel_branch_check.sh: use nm to find symbol value

This is considerably faster then parsing the objdump asm output. It will
also make the enabling of llvm-objdump a little easier.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200812081036.7969-2-sfr@canb.auug.org.au

powerpc: unrel_branch_check.sh: exit silently for early errors

If we can't find the address of __end_interrupts, then we still exit
successfully as that is the current behaviour.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200811140435.20957-8-sfr@canb.auug.org.au

powerpc: unrel_branch_check.sh: fix up the file header

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200811140435.20957-7-sfr@canb.auug.org.au

powerpc: unrel_branch_check.sh: simplify and tidy up the final loop

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200811140435.20957-6-sfr@canb.auug.org.au

powerpc: unrel_branch_check.sh: convert grep | sed | awk to just sed

Also start using sed -E and make all the separate expressions into a
single one with comments. Pull the stripping of condition registers
back into the sed command.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200811140435.20957-5-sfr@canb.auug.org.au

powerpc: unrel_branch_check.sh: simplify objdump's asm output

We don't use the raw hex instruction dump, so elide it and adjust the
following expressions.

Also use \s instead of [[:space:]] everywhere.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200811140435.20957-4-sfr@canb.auug.org.au

powerpc: unrel_branch_check.sh: simplify and combine some executions

Also some minor style changes.

There should still be no change in behaviour.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200811140435.20957-3-sfr@canb.auug.org.au

powerpc: unrel_branch_check.sh: fix shellcheck complaints

No functional change

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200811140435.20957-2-sfr@canb.auug.org.au

pseries/drmem: don't cache node id in drmem_lmb struct

At memory hot-remove time we can retrieve an LMB's nid from its
corresponding memory_block.  There is no need to store the nid
in multiple locations.

Note that lmb_to_memblock() uses find_memory_block() to get the
corresponding memory_block.  As find_memory_block() runs in sub-linear
time this approach is negligibly slower than what we do at present.

In exchange for this lookup at hot-remove time we no longer need to
call memory_add_physaddr_to_nid() during drmem_init() for each LMB.
On powerpc, memory_add_physaddr_to_nid() is a linear search, so this
spares us an O(n^2) initialization during boot.

On systems with many LMBs that initialization overhead is palpable and
disruptive.  For example, on a box with 249854 LMBs we're seeing
drmem_init() take upwards of 30 seconds to complete:

[   53.721639] drmem: initializing drmem v2
[   80.604346] watchdog: BUG: soft lockup - CPU#65 stuck for 23s! [swapper/0:1]
[   80.604377] Modules linked in:
[   80.604389] CPU: 65 PID: 1 Comm: swapper/0 Not tainted 5.6.0-rc2+ #4
[   80.604397] NIP:  c0000000000a4980 LR: c0000000000a4940 CTR: 0000000000000000
[   80.604407] REGS: c0002dbff8493830 TRAP: 0901   Not tainted  (5.6.0-rc2+)
[   80.604412] MSR:  8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE>  CR: 44000248  XER: 0000000d
[   80.604431] CFAR: c0000000000a4a38 IRQMASK: 0
[   80.604431] GPR00: c0000000000a4940 c0002dbff8493ac0 c000000001904400 c0003cfffffede30
[   80.604431] GPR04: 0000000000000000 c000000000f4095a 000000000000002f 0000000010000000
[   80.604431] GPR08: c0000bf7ecdb7fb8 c0000bf7ecc2d3c8 0000000000000008 c00c0002fdfb2001
[   80.604431] GPR12: 0000000000000000 c00000001e8ec200
[   80.604477] NIP [c0000000000a4980] hot_add_scn_to_nid+0xa0/0x3e0
[   80.604486] LR [c0000000000a4940] hot_add_scn_to_nid+0x60/0x3e0
[   80.604492] Call Trace:
[   80.604498] [c0002dbff8493ac0] [c0000000000a4940] hot_add_scn_to_nid+0x60/0x3e0 (unreliable)
[   80.604509] [c0002dbff8493b20] [c000000000087c10] memory_add_physaddr_to_nid+0x20/0x60
[   80.604521] [c0002dbff8493b40] [c0000000010d4880] drmem_init+0x25c/0x2f0
[   80.604530] [c0002dbff8493c10] [c000000000010154] do_one_initcall+0x64/0x2c0
[   80.604540] [c0002dbff8493ce0] [c0000000010c4aa0] kernel_init_freeable+0x2d8/0x3a0
[   80.604550] [c0002dbff8493db0] [c000000000010824] kernel_init+0x2c/0x148
[   80.604560] [c0002dbff8493e20] [c00000000000b648] ret_from_kernel_thread+0x5c/0x74
[   80.604567] Instruction dump:
[   80.604574] 392918e8 e9490000 e90a000a e92a0000 80ea000c 1d080018 3908ffe8 7d094214
[   80.604586] 7fa94040 419d00dc e9490010 714a0088 <2faa0008> 409e00ac e9490000 7fbe5040
[   89.047390] drmem: 249854 LMB(s)

With a patched kernel on the same machine we're no longer seeing the
soft lockup.  drmem_init() now completes in negligible time, even when
the LMB count is large.

Fixes: b2d3b5ee66f2 ("powerpc/pseries: Track LMB nid instead of using device tree")
Signed-off-by: Scott Cheloha <cheloha@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200811015115.63677-1-cheloha@linux.ibm.com

powerpc: Rewrite FSL_BOOKE flush_cache_instruction() in C

Nothing prevents flush_cache_instruction() from being writen in C.

Do it to improve readability and maintainability.

This function is only use by low level callers, it is not
intended to be used by module. Don't export it.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f989eff8296800c427622c0985384148404e4f0b.1597384512.git.christophe.leroy@csgroup.eu

powerpc: Rewrite 4xx flush_cache_instruction() in C

Nothing prevents flush_cache_instruction() from being writen in C.

Do it to improve readability and maintainability.

This function is very small and isn't called from assembly,
make it static inline in asm/cacheflush.h

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/93d93fc69b4b3ad3ceba2fc0756333c0c0245bb7.1597384512.git.christophe.leroy@csgroup.eu

powerpc: Move flush_instruction_cache() prototype in asm/cacheflush.h

flush_instruction_cache() belongs to the cache flushing function
family.

Move its prototype in asm/cacheflush.h

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/993445b5227e8ca2f0e38bcc9ea3dfea6e865920.1597384512.git.christophe.leroy@csgroup.eu

powerpc: Remove flush_instruction_cache for book3s/32

The only callers of flush_instruction_cache() are:

arch/powerpc/kernel/swsusp_booke.S: bl flush_instruction_cache
arch/powerpc/mm/nohash/40x.c: flush_instruction_cache();
arch/powerpc/mm/nohash/44x.c: flush_instruction_cache();
arch/powerpc/mm/nohash/fsl_booke.c: flush_instruction_cache();
arch/powerpc/platforms/44x/machine_check.c: flush_instruction_cache();
arch/powerpc/platforms/44x/machine_check.c: flush_instruction_cache();

This function is not used by book3s/32, drop it.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/50098f49877cea0f46730a9df82dcabf84160e4b.1597384512.git.christophe.leroy@csgroup.eu

powerpc/pseries: explicitly reschedule during drmem_lmb list traversal

The drmem lmb list can have hundreds of thousands of entries, and
unfortunately lookups take the form of linear searches. As long as
this is the case, traversals have the potential to monopolize the CPU
and provoke lockup reports, workqueue stalls, and the like unless
they explicitly yield.

Rather than placing cond_resched() calls within various
for_each_drmem_lmb() loop blocks in the code, put it in the iteration
expression of the loop macro itself so users can't omit it.

Introduce a drmem_lmb_next() iteration helper function which calls
cond_resched() at a regular interval during array traversal. Each
iteration of the loop in DLPAR code paths can involve around ten RTAS
calls which can each take up to 250us, so this ensures the check is
performed at worst every few milliseconds.

Fixes: 6c6ea53725b3 ("powerpc/mm: Separate ibm, dynamic-memory data from DT format")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200813151131.2070161-1-nathanl@linux.ibm.com

powerpc: Drop _nmask_and_or_msr()

_nmask_and_or_msr() is only used at two places to set MSR_IP.

The SYNC is unnecessary as the users are not PowerPC 601.

Can be easily writen in C.

Do it, and drop _nmask_and_or_msr()

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c2d2b8dfb8dd677026b26dffc8d31070c38a6b89.1597388079.git.christophe.leroy@csgroup.eu

powerpc: Use simple i2c probe function

The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe
function ("probe_new") can be used instead.

This avoids scanning the identifier tables during probes.

Signed-off-by: Stephen Kitt <steve@sk2.org>
Acked-by: Wolfram Sang <wsa@kernel.org>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200807152713.381588-1-steve@sk2.org

powerpc/pseries: new lparcfg key/value pair: partition_affinity_score

The H_GetPerformanceCounterInfo (GPCI) PHYP hypercall has a subcall,
Affinity_Domain_Info_By_Partition, which returns, among other things,
a "partition affinity score" for a given LPAR.  This score, a value on
[0-100], represents the processor-memory affinity for the LPAR in
question.  A score of 0 indicates the worst possible affinity while a
score of 100 indicates perfect affinity.  The score can be used to
reason about performance.

This patch adds the score for the local LPAR to the lparcfg procfile
under a new 'partition_affinity_score' key.

Signed-off-by: Scott Cheloha <cheloha@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727184605.2945095-2-cheloha@linux.ibm.com

powerpc/perf: consolidate GPCI hcall structs into asm/hvcall.h

The H_GetPerformanceCounterInfo (GPCI) hypercall input/output structs are
useful to modules outside of perf/, so move them into asm/hvcall.h to live
alongside the other powerpc hypercall structs.

Leave the perf-specific GPCI stuff in perf/hv-gpci.h.

Signed-off-by: Scott Cheloha <cheloha@linux.ibm.com>
Acked-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727184605.2945095-1-cheloha@linux.ibm.com

powerpc: drop hard_reset_now() and poweroff_now() declaration

Those function have never existed. Drop their declaration.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/edcdd72a36495d25213c0256c8022367458e0d19.1596716418.git.christophe.leroy@csgroup.eu

powerpc/fpu: Drop cvt_fd() and cvt_df()

Those two functions have been unused since commit identified below.
Drop them.

Fixes: 31bfdb036f12 ("powerpc: Use instruction emulation infrastructure to handle alignment faults")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d5641ada199b8dd2af16ad00a66084cf974f2704.1596716418.git.christophe.leroy@csgroup.eu

powerpc/irq: Drop forward declaration of struct irqaction

Since the commit identified below, the forward declaration of
struct irqaction is useless. Drop it.

Fixes: b709c0832824 ("ppc64: move stack switching up in interrupt processing")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e0bcdabac45fcd26c02d7df273bd4a5827c6033d.1596716375.git.christophe.leroy@csgroup.eu

powerpc/hwirq: Remove stale forward irq_chip declaration

Since commit identified below, the forward declaration of
struct irq_chip is useless (was struct hw_interrupt_type at that time)

Remove it, together with the associated comment.

Fixes: c0ad90a32fb6 ("[PATCH] genirq: add ->retrigger() irq op to consolidate hw_irq_resend()")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/fbe58d27cf128d5fe581e4510ded8701858f268e.1596716328.git.christophe.leroy@csgroup.eu

macintosh: windfarm: remove detatch debug containing spelling mistakes

There are spelling mistakes in two debug messages. As recommended
by Wolfram Sang, these can be removed as there is plenty of debug
in the driver core.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200806102901.44988-1-colin.king@canonical.com

powerpc/32s: Fix assembler warning about r0

The assembler says:
arch/powerpc/kernel/head_32.S:1095: Warning: invalid register expression

It's objecting to the use of r0 as the RA argument. That's because
when RA = 0 the literal value 0 is used, rather than the content of
r0, making the use of r0 in the source potentially confusing.

Fix it to use a literal 0, the generated code is identical.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2b69ac8e1cddff6f808fc7415907179eab4aae9e.1596693679.git.christophe.leroy@csgroup.eu

powerpc/nx: Don't pack struct coprocessor_request_block

Building with W=1 results in the following warning:

In file included from arch/powerpc/platforms/powernv/vas-fault.c:16:
./arch/powerpc/include/asm/icswx.h:159:1: error: alignment 1 of ‘struct
coprocessor_request_block’ is less than 16 [-Werror=packed-not-aligned]
159 | } __packed;
| ^
./arch/powerpc/include/asm/icswx.h:159:1: error: alignment 1 of ‘struct
coprocessor_request_block’ is less than 16 [-Werror=packed-not-aligned]
./arch/powerpc/include/asm/icswx.h:159:1: error: alignment 1 of ‘struct
coprocessor_request_block’ is less than 16 [-Werror=packed-not-aligned]
./arch/powerpc/include/asm/icswx.h:159:1: error: alignment 1 of ‘struct
coprocessor_request_block’ is less than 16 [-Werror=packed-not-aligned]
cc1: all warnings being treated as errors

This happens because coprocessor_request_block includes several
sub-structures with an alignment specified using the __aligned(XX)
attribute. The problem comes from coprocessor_request_block having the
__packed attribute. Packing the structure causes the preferred alignment of
the nested structures to be ignored and we get the warnings as a result.

This isn't a problem in practice since the struct is defined with explicit
padding in the form of reserved fields, but we'd like to get rid of the
spurious warnings. The simplest solution is to remove the packed attribute
and use a BUILD_BUG_ON() to ensure the struct is the correct (expected by
HW) size compile time.

Also add a __aligned(128) to the request block structure since Book4 for P8
suggests the HW requires it to be aligned to a 128 byte boundary. There's a
similar requirement for P9 since the COPY and PASTE instructions used to
invoke VAS/NX accelerators operates on a cache line boundary.

Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200804005410.146094-7-oohall@gmail.com

powerpc/powernv: Fix spurious kerneldoc warnings in opal-prd.c

Comments opening with /** are parsed by kerneldoc and this causes the
following warning to be printed:

arch/powerpc/platforms/powernv/opal-prd.c:31: warning: cannot understand
function prototype: 'struct opal_prd_msg_queue_item '

opal_prd_mesg_queue_item is an internal data structure so there's no real
need for it to be documented at all. Fix up the comment to squash the
warning.

Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200804005410.146094-5-oohall@gmail.com

powerpc/powernv: Staticify functions without prototypes

There's a few scattered in the powernv platform.

Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200804005410.146094-4-oohall@gmail.com

powerpc/powernv: Include asm/powernv.h from the local powernv.h

The asm/powernv.h header provides prototypes for functions which need to be
called by non-powernv platform code. Also include it in the powernv.h
that's local to the platform directory to squash some warnings about
non-static functions missing prototypes.

Also include powernv.h since from opal-memcons.c since it has the
prototypes for the memcons wrangling functions which are used for the opal
and ultravisor msglog.

Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200804005410.146094-3-oohall@gmail.com

powerpc/powernv/smp: Fix spurious DBG() warning

When building with W=1 we get the following warning:

arch/powerpc/platforms/powernv/smp.c: In function ‘pnv_smp_cpu_kill_self’:
arch/powerpc/platforms/powernv/smp.c:276:16: error: suggest braces around
empty body in an ‘if’ statement [-Werror=empty-body]
276 | cpu, srr1);
| ^
cc1: all warnings being treated as errors

The full context is this block:

if (srr1 && !generic_check_cpu_restart(cpu))
DBG("CPU%d Unexpected exit while offline srr1=%lx!\n",
cpu, srr1);

When building with DEBUG undefined DBG() expands to nothing and GCC emits
the warning due to the lack of braces around an empty statement.

Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200804005410.146094-2-oohall@gmail.com

powerpc/oprofile: fix spelling mistake "contex" -> "context"

There is a spelling mistake in a pr_debug message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200804174316.402425-1-colin.king@canonical.com

powerpc/vmemmap: Don't warn if we don't find a mapping vmemmap list entry

Now that we are handling vmemmap list allocation failure correctly, don't
WARN in section deactivate when we don't find a mapping vmemmap list entry.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200731113500.248306-2-aneesh.kumar@linux.ibm.com

powerpc/vmemmap: Fix memory leak with vmemmap list allocation failures.

If we fail to allocate vmemmap list, we don't keep track of allocated
vmemmap block buf. Hence on section deactivate we skip vmemmap block
buf free. This results in memory leak.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200731113500.248306-1-aneesh.kumar@linux.ibm.com

powerpc/powernv: Remove set but not used variable 'parent'

Fix gcc '-Wunused-but-set-variable' warning:

arch/powerpc/platforms/powernv/pci-ioda.c: In function pnv_ioda_configure_pe:
arch/powerpc/platforms/powernv/pci-ioda.c:867:18: warning: variable parent set but not used [-Wunused-but-set-variable]

It is not used since commit b131a8425c34 ("powerpc/powernv:
Set PELTV for compound PEs")

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1574144074-142032-6-git-send-email-zhengbin13@huawei.com

powerpc/perf: Remove set but not used variable 'target'

Fix gcc '-Wunused-but-set-variable' warning:

arch/powerpc/perf/imc-pmu.c: In function trace_imc_event_init:
arch/powerpc/perf/imc-pmu.c:1292:22: warning: variable target set but not used [-Wunused-but-set-variable]

It is introduced by commit 012ae244845f ("powerpc/perf:
Trace imc PMU functions"), but never used, so remove it.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1574144074-142032-3-git-send-email-zhengbin13@huawei.com

powerpc/fadump: Remove set but not used variable 'elf'

Fix gcc '-Wunused-but-set-variable' warning:

arch/powerpc/kernel/fadump.c: In function fadump_update_elfcore_header:
arch/powerpc/kernel/fadump.c:790:17: warning: variable elf set but not used [-Wunused-but-set-variable]

It is introduced by commit ebaeb5ae2437 ("fadump:
Convert firmware-assisted cpu state dump data into elf notes."),
but never used, so remove it.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1574144074-142032-2-git-send-email-zhengbin13@huawei.com

powerc/dtc/t1024rdb: remove interrupts property

Since the interrupt pin for RTC DS1339 is not connected
to the CPU on T1024RDB, remove the interrupt property
from the device tree.

This also fix the following warning for hwclock.util-linux:
$ hwclock.util-linux
hwclock.util-linux: select() to /dev/rtc0
to wait for clock tick timed out

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200527034228.23793-2-biwen.li@oss.nxp.com

powerpc/dts/t4240rdb: remove interrupts property

Since the interrupt pin for RTC DS1374 is not connected
to the CPU on T4240RDB, remove the interrupt property
from the device tree.

This also fix the following warning for hwclock.util-linux:
$ hwclock.util-linux
hwclock.util-linux: select() to /dev/rtc0
to wait for clock tick timed out

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200527034228.23793-1-biwen.li@oss.nxp.com

cxl: Rework error message for incompatible slots

Improve the error message shown if a capi adapter is plugged on a
capi-incompatible slot directly under the PHB (no intermediate switch).

Fixes: 5632874311db ("cxl: Add support for POWER9 DD2")
Cc: stable@vger.kernel.org # 4.14+
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200407115601.25453-1-fbarrat@linux.ibm.com

ocxl: Remove custom service to allocate interrupts

We now allocate interrupts through xive directly.

Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200403153838.29224-5-fbarrat@linux.ibm.com

ocxl: Don't return trigger page when allocating an interrupt

Existing users of ocxl_link_irq_alloc() have been converted to obtain
the trigger page of an interrupt through xive directly, we therefore
have no need to return the trigger page when allocating an interrupt.

It also allows ocxl to use the xive native interface to allocate
interrupts, instead of its custom service.

Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200403153838.29224-4-fbarrat@linux.ibm.com

ocxl: Access interrupt trigger page from xive directly

We can access the trigger page through standard APIs so let's use it
and avoid saving it when allocating the interrupt. It will also allow
to simplify allocation in a later patch.

Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200403153838.29224-3-fbarrat@linux.ibm.com

scsi: cxlflash: Access interrupt trigger page from xive directly

xive is already mapping the trigger page in kernel space and it can be
accessed through standard APIs, so let's reuse it and simplify the code.

Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Matthew R. Ochs <mrochs@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200403153838.29224-2-fbarrat@linux.ibm.com

powerpc/icp-hv: Fix missing of_node_put() in success path

Both of_find_compatible_node() and of_find_node_by_type() will return
a refcounted node on success - thus for the success path the node must
be explicitly released with a of_node_put().

Fixes: 0b05ac6e2480 ("powerpc/xics: Rewrite XICS driver")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1530691407-3991-1-git-send-email-hofrat@osadl.org

powerpc/pseries: Fix missing of_node_put() in rng_init()

The call to of_find_compatible_node() returns a node pointer with
refcount incremented thus it must be explicitly decremented here
before returning.

Fixes: a489043f4626 ("powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1530522496-14816-1-git-send-email-hofrat@osadl.org

Linux 5.9-rc2

Merge tag 'powerpc-5.9-3' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

- Add perf support for emitting extended registers for power10.

- A fix for CPU hotplug on pseries, where on large/loaded systems we
   may not wait long enough for the CPU to be offlined, leading to
   crashes.

- Addition of a raw cputable entry for Power10, which is not required
   to boot, but is required to make our PMU setup work correctly in
   guests.

- Three fixes for the recent changes on 32-bit Book3S to move modules
   into their own segment for strict RWX.

- A fix for a recent change in our powernv PCI code that could lead to
   crashes.

- A change to our perf interrupt accounting to avoid soft lockups when
   using some events, found by syzkaller.

- A change in the way we handle power loss events from the hypervisor
   on pseries. We no longer immediately shut down if we're told we're
   running on a UPS.

- A few other minor fixes.

Thanks to Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T
Sudhakar, Athira Rajeev, Christophe Leroy, Frederic Barrat, Greg Kurz,
Kajol Jain, Madhavan Srinivasan, Michael Neuling, Michael Roth,
Nageswara R Sastry, Oliver O'Halloran, Thiago Jung Bauermann,
Vaidyanathan Srinivasan, Vasant Hegde.

* tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver
  powerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000
  powerpc/pseries: Do not initiate shutdown when system is running on UPS
  powerpc/perf: Fix soft lockups due to missed interrupt accounting
  powerpc/powernv/pci: Fix possible crash when releasing DMA resources
  powerpc/pseries/hotplug-cpu: wait indefinitely for vCPU death
  powerpc/32s: Fix is_module_segment() when MODULES_VADDR is defined
  powerpc/kasan: Fix KASAN_SHADOW_START on BOOK3S_32
  powerpc/fixmap: Fix the size of the early debug area
  powerpc/pkeys: Fix build error with PPC_MEM_KEYS disabled
  powerpc/kernel: Cleanup machine check function declarations
  powerpc: Add POWER10 raw mode cputable entry
  powerpc/perf: Add extended regs support for power10 platform
  powerpc/perf: Add support for outputting extended regs in perf intr_regs
  powerpc: Fix P10 PVR revision in /proc/cpuinfo for SMT4 cores

Merge tag 'x86-urgent-2020-08-23' of git://git./linux/kernel/git/tip/tip

Pull x86 fix from Thomas Gleixner:
"A single fix for x86 which removes the RDPID usage from the paranoid
  entry path and unconditionally uses LSL to retrieve the CPU number.

  RDPID depends on MSR_TSX_AUX. KVM has an optmization to avoid
  expensive MRS read/writes on VMENTER/EXIT. It caches the MSR values
  and restores them either when leaving the run loop, on preemption or
  when going out to user space. MSR_TSX_AUX is part of that lazy MSR
  set, so after writing the guest value and before the lazy restore any
  exception using the paranoid entry will read the guest value and use
  it as CPU number to retrieve the GSBASE value for the current CPU when
  FSGSBASE is enabled. As RDPID is only used in that particular entry
  path, there is no reason to burden VMENTER/EXIT with two extra MSR
  writes. Remove the RDPID optimization, which is not even backed by
  numbers from the paranoid entry path instead"

* tag 'x86-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM

Merge tag 'perf-urgent-2020-08-23' of git://git./linux/kernel/git/tip/tip

Pull x86 perf fix from Thomas Gleixner:
"A single update for perf on x86 which has support for the broken down
bandwith counters"

* tag 'perf-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add BW counters for GT, IA and IO breakdown

Merge tag 'efi-urgent-2020-08-23' of git://git./linux/kernel/git/tip/tip

Pull EFI fixes from Thomas Gleixner:

- Enforce NX on RO data in mixed EFI mode

- Destroy workqueue in an error handling path to prevent UAF

- Stop argument parser at '--' which is the delimiter for init

- Treat a NULL command line pointer as empty instead of dereferncing it
   unconditionally.

- Handle an unterminated command line correctly

- Cleanup the 32bit code leftovers and remove obsolete documentation

* tag 'efi-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation: efi: remove description of efi=old_map
  efi/x86: Move 32-bit code into efi_32.c
  efi/libstub: Handle unterminated cmdline
  efi/libstub: Handle NULL cmdline
  efi/libstub: Stop parsing arguments at "--"
  efi: add missed destroy_workqueue when efisubsys_init fails
  efi/x86: Mark kernel rodata non-executable for mixed mode

Merge tag 'core-urgent-2020-08-23' of git://git./linux/kernel/git/tip/tip

Pull entry fix from Thomas Gleixner:
"A single bug fix for the common entry code.

  The transcription of the x86 version messed up the reload of the
  syscall number from pt_regs after ptrace and seccomp which breaks
  syscall number rewriting"

* tag 'core-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  core/entry: Respect syscall number rewrites

Merge tag 'edac_urgent_for_v5.9_rc2' of git://git./linux/kernel/git/ras/ras

Pull EDAC fix from Borislav Petkov:
"A single fix correcting a reversed error severity determination check
  which lead to a recoverable error getting marked as fatal, by Tony
  Luck"

* tag 'edac_urgent_for_v5.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/{i7core,sb,pnd2,skx}: Fix error event severity

Merge git://git./linux/kernel/git/netdev/net

Pull networking fixes from David Miller:
"Nothing earth shattering here, lots of small fixes (f.e. missing RCU
  protection, bad ref counting, missing memset(), etc.) all over the
  place:

   1) Use get_file_rcu() in task_file iterator, from Yonghong Song.

   2) There are two ways to set remote source MAC addresses in macvlan
      driver, but only one of which validates things properly. Fix this.
      From Alvin Šipraga.

   3) Missing of_node_put() in gianfar probing, from Sumera
      Priyadarsini.

   4) Preserve device wanted feature bits across multiple netlink
      ethtool requests, from Maxim Mikityanskiy.

   5) Fix rcu_sched stall in task and task_file bpf iterators, from
      Yonghong Song.

   6) Avoid reset after device destroy in ena driver, from Shay
      Agroskin.

   7) Missing memset() in netlink policy export reallocation path, from
      Johannes Berg.

   8) Fix info leak in __smc_diag_dump(), from Peilin Ye.

   9) Decapsulate ECN properly for ipv6 in ipv4 tunnels, from Mark
      Tomlinson.

  10) Fix number of data stream negotiation in SCTP, from David Laight.

  11) Fix double free in connection tracker action module, from Alaa
      Hleihel.

  12) Don't allow empty NHA_GROUP attributes, from Nikolay Aleksandrov"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
  net: nexthop: don't allow empty NHA_GROUP
  bpf: Fix two typos in uapi/linux/bpf.h
  net: dsa: b53: check for timeout
  tipc: call rcu_read_lock() in tipc_aead_encrypt_done()
  net/sched: act_ct: Fix skb double-free in tcf_ct_handle_fragments() error flow
  net: sctp: Fix negotiation of the number of data streams.
  dt-bindings: net: renesas, ether: Improve schema validation
  gre6: Fix reception with IP6_TNL_F_RCV_DSCP_COPY
  hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit()
  hv_netvsc: Remove "unlikely" from netvsc_select_queue
  bpf: selftests: global_funcs: Check err_str before strstr
  bpf: xdp: Fix XDP mode when no mode flags specified
  selftests/bpf: Remove test_align leftovers
  tools/resolve_btfids: Fix sections with wrong alignment
  net/smc: Prevent kernel-infoleak in __smc_diag_dump()
  sfc: fix build warnings on 32-bit
  net: phy: mscc: Fix a couple of spelling mistakes "spcified" -> "specified"
  libbpf: Fix map index used in error message
  net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe()
  net: atlantic: Use readx_poll_timeout() for large timeout
  ...

Merge branch 'work.epoll' of git://git./linux/kernel/git/viro/vfs

Pull epoll fixes from Al Viro:
"Fix reference counting and clean up exit paths"

* 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_epoll_ctl(): clean the failure exits up a bit
epoll: Keep a reference on files added to the check list

do_epoll_ctl(): clean the failure exits up a bit

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

epoll: Keep a reference on files added to the check list

When adding a new fd to an epoll, and that this new fd is an
epoll fd itself, we recursively scan the fds attached to it
to detect cycles, and add non-epool files to a "check list"
that gets subsequently parsed.

However, this check list isn't completely safe when deletions
can happen concurrently. To sidestep the issue, make sure that
a struct file placed on the check list sees its f_count increased,
ensuring that a concurrent deletion won't result in the file
disapearing from under our feet.

Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

net: nexthop: don't allow empty NHA_GROUP

Currently the nexthop code will use an empty NHA_GROUP attribute, but it
requires at least 1 entry in order to function properly. Otherwise we
end up derefencing null or random pointers all over the place due to not
having any nh_grp_entry members allocated, nexthop code relies on having at
least the first member present. Empty NHA_GROUP doesn't make any sense so
just disallow it.
Also add a WARN_ON for any future users of nexthop_create_group().

BUG: kernel NULL pointer dereference, address: 0000000000000080
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP
CPU: 0 PID: 558 Comm: ip Not tainted 5.9.0-rc1+ #93
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014
RIP: 0010:fib_check_nexthop+0x4a/0xaa
Code: 0f 84 83 00 00 00 48 c7 02 80 03 f7 81 c3 40 80 fe fe 75 12 b8 ea ff ff ff 48 85 d2 74 6b 48 c7 02 40 03 f7 81 c3 48 8b 40 10 <48> 8b 80 80 00 00 00 eb 36 80 78 1a 00 74 12 b8 ea ff ff ff 48 85
RSP: 0018:ffff88807983ba00 EFLAGS: 00010213
RAX: 0000000000000000 RBX: ffff88807983bc00 RCX: 0000000000000000
RDX: ffff88807983bc00 RSI: 0000000000000000 RDI: ffff88807bdd0a80
RBP: ffff88807983baf8 R08: 0000000000000dc0 R09: 000000000000040a
R10: 0000000000000000 R11: ffff88807bdd0ae8 R12: 0000000000000000
R13: 0000000000000000 R14: ffff88807bea3100 R15: 0000000000000001
FS:  00007f10db393700(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000080 CR3: 000000007bd0f004 CR4: 00000000003706f0
Call Trace:
  fib_create_info+0x64d/0xaf7
  fib_table_insert+0xf6/0x581
  ? __vma_adjust+0x3b6/0x4d4
  inet_rtm_newroute+0x56/0x70
  rtnetlink_rcv_msg+0x1e3/0x20d
  ? rtnl_calcit.isra.0+0xb8/0xb8
  netlink_rcv_skb+0x5b/0xac
  netlink_unicast+0xfa/0x17b
  netlink_sendmsg+0x334/0x353
  sock_sendmsg_nosec+0xf/0x3f
  ____sys_sendmsg+0x1a0/0x1fc
  ? copy_msghdr_from_user+0x4c/0x61
  ___sys_sendmsg+0x63/0x84
  ? handle_mm_fault+0xa39/0x11b5
  ? sockfd_lookup_light+0x72/0x9a
  __sys_sendmsg+0x50/0x6e
  do_syscall_64+0x54/0xbe
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f10dacc0bb7
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb cd 66 0f 1f 44 00 00 8b 05 9a 4b 2b 00 85 c0 75 2e 48 63 ff 48 63 d2 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 01 c3 48 8b 15 b1 f2 2a 00 f7 d8 64 89 02 48
RSP: 002b:00007ffcbe628bf8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007ffcbe628f80 RCX: 00007f10dacc0bb7
RDX: 0000000000000000 RSI: 00007ffcbe628c60 RDI: 0000000000000003
RBP: 000000005f41099c R08: 0000000000000001 R09: 0000000000000008
R10: 00000000000005e9 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007ffcbe628d70 R15: 0000563a86c6e440
Modules linked in:
CR2: 0000000000000080

CC: David Ahern <dsahern@gmail.com>
Fixes: 430a049190de ("nexthop: Add support for nexthop groups")
Reported-by: syzbot+a61aa19b0c14c8770bd9@syzkaller.appspotmail.com
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'kbuild-fixes-v5.9' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

- move -Wsign-compare warning from W=2 to W=3

- fix the keyword _restrict to __restrict in genksyms

- fix more bugs in qconf

* tag 'kbuild-fixes-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: qconf: replace deprecated QString::sprintf() with QTextStream
  kconfig: qconf: remove redundant help in the info view
  kconfig: qconf: remove qInfo() to get back Qt4 support
  kconfig: qconf: remove unused colNr
  kconfig: qconf: fix the popup menu in the ConfigInfoView window
  kconfig: qconf: fix signal connection to invalid slots
  genksyms: keywords: Use __restrict not _restrict
  kbuild: remove redundant patterns in filter/filter-out
  extract-cert: add static to local data
  Makefile.extrawarn: Move sign-compare from W=2 to W=3

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:

- Allow booting of late secondary CPUs affected by erratum 1418040
   (currently they are parked if none of the early CPUs are affected by
   this erratum).

- Add the 32-bit vdso Makefile to the vdso_install rule so that 'make
   vdso_install' installs the 32-bit compat vdso when it is compiled.

- Print a warning that untrusted guests without a CPU erratum
   workaround (Cortex-A57 832075) may deadlock the affected system.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  ARM64: vdso32: Install vdso32 from vdso_install
  KVM: arm64: Print warning when cpu erratum can cause guests to deadlock
  arm64: Allow booting of late CPUs affected by erratum 1418040
  arm64: Move handling of erratum 1418040 into C code

Merge tag 's390-5.9-3' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Vasily Gorbik:

- a couple of fixes for storage key handling relevant for debugging

- add cond_resched into potentially slow subchannels scanning loop

- fixes for PF/VF linking and to ignore stale PCI configuration request
   events

* tag 's390-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: fix PF/VF linking on hot plug
  s390/pci: re-introduce zpci_remove_device()
  s390/pci: fix zpci_bus_link_virtfn()
  s390/ptrace: fix storage key handling
  s390/runtime_instrumentation: fix storage key handling
  s390/pci: ignore stale configuration request event
  s390/cio: add cond_resched() in the slow_eval_known_fn() loop

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:

- PAE and PKU bugfixes for x86

- selftests fix for new binutils

- MMU notifier fix for arm64

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set
  KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()
  kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode
  kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode
  KVM: x86: fix access code passed to gva_to_gpa
  selftests: kvm: Use a shorter encoding to clear RAX

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"23 fixes in 5 drivers (qla2xxx, ufs, scsi_debug, fcoe, zfcp). The bulk
  of the changes are in qla2xxx and ufs and all are mostly small and
  definitely don't impact the core"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
  Revert "scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe"
  Revert "scsi: qla2xxx: Fix crash on qla2x00_mailbox_command"
  scsi: qla2xxx: Fix null pointer access during disconnect from subsystem
  scsi: qla2xxx: Check if FW supports MQ before enabling
  scsi: qla2xxx: Fix WARN_ON in qla_nvme_register_hba
  scsi: qla2xxx: Allow ql2xextended_error_logging special value 1 to be set anytime
  scsi: qla2xxx: Reduce noisy debug message
  scsi: qla2xxx: Fix login timeout
  scsi: qla2xxx: Indicate correct supported speeds for Mezz card
  scsi: qla2xxx: Flush I/O on zone disable
  scsi: qla2xxx: Flush all sessions on zone disable
  scsi: qla2xxx: Use MBX_TOV_SECONDS for mailbox command timeout values
  scsi: scsi_debug: Fix scp is NULL errors
  scsi: zfcp: Fix use-after-free in request timeout handlers
  scsi: ufs: No need to send Abort Task if the task in DB was cleared
  scsi: ufs: Clean up completed request without interrupt notification
  scsi: ufs: Improve interrupt handling for shared interrupts
  scsi: ufs: Fix interrupt error message for shared interrupts
  scsi: ufs-pci: Add quirk for broken auto-hibernate for Intel EHL
  scsi: ufs-mediatek: Fix incorrect time to wait link status
  ...

Merge tag 'devicetree-fixes-for-5.9-2' of git://git./linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:
"Another set of DT fixes:

   - restore range parsing error check

   - workaround PCI range parsing with missing 'device_type' now
     required

   - correct description of 'phy-connection-type'

   - fix erroneous matching on 'snps,dw-pcie' by 'intel,lgm-pcie' schema

   - a couple of grammar and whitespace fixes

   - update Shawn Guo's email"

* tag 'devicetree-fixes-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: vendor-prefixes: Remove trailing whitespace
  dt-bindings: net: correct description of phy-connection-type
  dt-bindings: PCI: intel,lgm-pcie: Fix matching on all snps,dw-pcie instances
  of: address: Work around missing device_type property in pcie nodes
  dt: writing-schema: Miscellaneous grammar fixes
  dt-bindings: Use Shawn Guo's preferred e-mail for i.MX bindings
  of/address: check for invalid range.cpu_addr

dt-bindings: vendor-prefixes: Remove trailing whitespace

Fixes: f516fb704d02fff2 ("dt-bindings: Whitespace clean-ups in schema files")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200819092058.1526-1-geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>

KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set

When an MMU notifier call results in unmapping a range that spans multiple
PGDs, we end up calling into cond_resched_lock() when crossing a PGD boundary,
since this avoids running into RCU stalls during VM teardown. Unfortunately,
if the VM is destroyed as a result of OOM, then blocking is not permitted
and the call to the scheduler triggers the following BUG():

| BUG: sleeping function called from invalid context at arch/arm64/kvm/mmu.c:394
| in_atomic(): 1, irqs_disabled(): 0, non_block: 1, pid: 36, name: oom_reaper
| INFO: lockdep is turned off.
| CPU: 3 PID: 36 Comm: oom_reaper Not tainted 5.8.0 #1
| Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
| Call trace:
|  dump_backtrace+0x0/0x284
|  show_stack+0x1c/0x28
|  dump_stack+0xf0/0x1a4
|  ___might_sleep+0x2bc/0x2cc
|  unmap_stage2_range+0x160/0x1ac
|  kvm_unmap_hva_range+0x1a0/0x1c8
|  kvm_mmu_notifier_invalidate_range_start+0x8c/0xf8
|  __mmu_notifier_invalidate_range_start+0x218/0x31c
|  mmu_notifier_invalidate_range_start_nonblock+0x78/0xb0
|  __oom_reap_task_mm+0x128/0x268
|  oom_reap_task+0xac/0x298
|  oom_reaper+0x178/0x17c
|  kthread+0x1e4/0x1fc
|  ret_from_fork+0x10/0x30

Use the new 'flags' argument to kvm_unmap_hva_range() to ensure that we
only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is set in the notifier
flags.

Cc: <stable@vger.kernel.org>
Fixes: 8b3405e345b5 ("kvm: arm/arm64: Fix locking for kvm_free_stage2_pgd")
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20200811102725.7121-3-will@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()

The 'flags' field of 'struct mmu_notifier_range' is used to indicate
whether invalidate_range_{start,end}() are permitted to block. In the
case of kvm_mmu_notifier_invalidate_range_start(), this field is not
forwarded on to the architecture-specific implementation of
kvm_unmap_hva_range() and therefore the backend cannot sensibly decide
whether or not to block.

Add an extra 'flags' parameter to kvm_unmap_hva_range() so that
architectures are aware as to whether or not they are permitted to block.

Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20200811102725.7121-2-will@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

dt-bindings: net: correct description of phy-connection-type

The phy-connection-type parameter is described in ePAPR 1.1:

Specifies interface type between the Ethernet device and a physical
layer (PHY) device. The value of this property is specific to the
implementation.

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://lore.kernel.org/r/1597917724-11127-1-git-send-email-madalin.bucur@oss.nxp.com
Signed-off-by: Rob Herring <robh@kernel.org>

Merge tag 'io_uring-5.9-2020-08-21' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:

- Make sure the head link cancelation includes async work

- Get rid of kiocb_wait_page_queue_init(), makes no sense to have it as
   a separate function since you moved it into io_uring itself

- io_import_iovec cleanups (Pavel, me)

- Use system_unbound_wq for ring exit work, to avoid spawning tons of
   these if we have tons of rings exiting at the same time

- Fix req->flags overflow flag manipulation (Pavel)

* tag 'io_uring-5.9-2020-08-21' of git://git.kernel.dk/linux-block:
  io_uring: kill extra iovec=NULL in import_iovec()
  io_uring: comment on kfree(iovec) checks
  io_uring: fix racy req->flags modification
  io_uring: use system_unbound_wq for ring exit work
  io_uring: cleanup io_import_iovec() of pre-mapped request
  io_uring: get rid of kiocb_wait_page_queue_init()
  io_uring: find and cancel head link async work on files exit

dt-bindings: PCI: intel,lgm-pcie: Fix matching on all snps,dw-pcie instances

The intel,lgm-pcie binding is matching on all snps,dw-pcie instances
which is wrong. Add a custom 'select' entry to fix this.

Fixes: e54ea45a4955 ("dt-bindings: PCI: intel: Add YAML schemas for the PCIe RC controller")
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Reviewed-by: Dilip Kota <eswara.kota@linux.intel.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"11 patches.

  Subsystems affected by this: misc, mm/hugetlb, mm/vmalloc, mm/misc,
  romfs, relay, uprobes, squashfs, mm/cma, mm/pagealloc"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm, page_alloc: fix core hung in free_pcppages_bulk()
  mm: include CMA pages in lowmem_reserve at boot
  squashfs: avoid bio_alloc() failure with 1Mbyte blocks
  uprobes: __replace_page() avoid BUG in munlock_vma_page()
  kernel/relay.c: fix memleak on destroy relay channel
  romfs: fix uninitialized memory leak in romfs_dev_read()
  mm/rodata_test.c: fix missing function declaration
  mm/vunmap: add cond_resched() in vunmap_pmd_range
  khugepaged: adjust VM_BUG_ON_MM() in __khugepaged_enter()
  hugetlb_cgroup: convert comma to semicolon
  mailmap: add Andi Kleen

Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Alexei Starovoitov says:

====================
pull-request: bpf 2020-08-21

The following pull-request contains BPF updates for your *net* tree.

We've added 11 non-merge commits during the last 5 day(s) which contain
a total of 12 files changed, 78 insertions(+), 24 deletions(-).

The main changes are:

1) three fixes in BPF task iterator logic, from Yonghong.

2) fix for compressed dwarf sections in vmlinux, from Jiri.

3) fix xdp attach regression, from Andrii.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'riscv-for-linus-5.9-rc2' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

- The CLINT driver has been split in two: one to handle the M-mode
   CLINT (memory mapped and used on NOMMU systems) and one to handle the
   S-mode CLINT (via SBI).

- The addition of SiFive's drivers to rv32_defconfig

* tag 'riscv-for-linus-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Add SiFive drivers to rv32_defconfig
  dt-bindings: timer: Add CLINT bindings
  RISC-V: Remove CLINT related code from timer and arch
  clocksource/drivers: Add CLINT timer driver
  RISC-V: Add mechanism to provide custom IPI operations

Merge tag 'for-linus-5.9-rc2-tag' of git://git./linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:
"One build fix and a minor fix for suppressing a useless warning when
  booting a Xen dom0 via UEFI"

* tag 'for-linus-5.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  Fix build error when CONFIG_ACPI is not set/enabled:
  efi: avoid error message when booting under Xen

Merge tag 'pm-5.9-rc2' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
"These fix a few issues in the operating performance points (OPP)
  framework.

  Specifics:

   - Fix re-enabling of resources in dev_pm_opp_set_rate() (Rajendra
     Nayak)

   - Fix OPP table reference counting in error paths (Stephen Boyd)"

* tag 'pm-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  opp: Enable resources again if they were disabled earlier
  opp: Put opp table in dev_pm_opp_set_rate() if _set_opp_bw() fails
  opp: Put opp table in dev_pm_opp_set_rate() for empty tables

bpf: Fix two typos in uapi/linux/bpf.h

Also remove trailing whitespaces in bpf_skb_get_tunnel_key example code.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200821133642.18870-1-tklauser@distanz.ch

net: dsa: b53: check for timeout

clang static analysis reports this problem

b53_common.c:1583:13: warning: The left expression of the compound
  assignment is an uninitialized value. The computed value will
  also be garbage
        ent.port &= ~BIT(port);
        ~~~~~~~~ ^

ent is set by a successful call to b53_arl_read().  Unsuccessful
calls are caught by an switch statement handling specific returns.
b32_arl_read() calls b53_arl_op_wait() which fails with the
unhandled -ETIMEDOUT.

So add -ETIMEDOUT to the switch statement.  Because
b53_arl_op_wait() already prints out a message, do not add another
one.

Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ARM64: vdso32: Install vdso32 from vdso_install

Add the 32-bit vdso Makefile to the vdso_install rule so that 'make
vdso_install' installs the 32-bit compat vdso when it is compiled.

Fixes: a7f71a2c8903 ("arm64: compat: Add vDSO")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20200818014950.42492-1-swboyd@chromium.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Merge tag 'ext4_for_linus' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
"Improvements to ext4's block allocator performance for very large file
  systems, especially when the file system or files which are highly
  fragmented. There is a new mount option, prefetch_block_bitmaps which
  will pull in the block bitmaps and set up the in-memory buddy bitmaps
  when the file system is initially mounted.

  Beyond that, a lot of bug fixes and cleanups. In particular, a number
  of changes to make ext4 more robust in the face of write errors or
  file system corruptions"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (46 commits)
  ext4: limit the length of per-inode prealloc list
  ext4: reorganize if statement of ext4_mb_release_context()
  ext4: add mb_debug logging when there are lost chunks
  ext4: Fix comment typo "the the".
  jbd2: clean up checksum verification in do_one_pass()
  ext4: change to use fallthrough macro
  ext4: remove unused parameter of ext4_generic_delete_entry function
  mballoc: replace seq_printf with seq_puts
  ext4: optimize the implementation of ext4_mb_good_group()
  ext4: delete invalid comments near ext4_mb_check_limits()
  ext4: fix typos in ext4_mb_regular_allocator() comment
  ext4: fix checking of directory entry validity for inline directories
  fs: prevent BUG_ON in submit_bh_wbc()
  ext4: correctly restore system zone info when remount fails
  ext4: handle add_system_zone() failure in ext4_setup_system_zone()
  ext4: fold ext4_data_block_valid_rcu() into the caller
  ext4: check journal inode extents more carefully
  ext4: don't allow overlapping system zones
  ext4: handle error of ext4_setup_system_zone() on remount
  ext4: delete the invalid BUGON in ext4_mb_load_buddy_gfp()
  ...

afs: Fix NULL deref in afs_dynroot_depopulate()

If an error occurs during the construction of an afs superblock, it's
possible that an error occurs after a superblock is created, but before
we've created the root dentry. If the superblock has a dynamic root
(ie. what's normally mounted on /afs), the afs_kill_super() will call
afs_dynroot_depopulate() to unpin any created dentries - but this will
oops if the root hasn't been created yet.

Fix this by skipping that bit of code if there is no root dentry.

This leads to an oops looking like:

general protection fault, ...
KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f]
...
RIP: 0010:afs_dynroot_depopulate+0x25f/0x529 fs/afs/dynroot.c:385
...
Call Trace:
afs_kill_super+0x13b/0x180 fs/afs/super.c:535
deactivate_locked_super+0x94/0x160 fs/super.c:335
afs_get_tree+0x1124/0x1460 fs/afs/super.c:598
vfs_get_tree+0x89/0x2f0 fs/super.c:1547
do_new_mount fs/namespace.c:2875 [inline]
path_mount+0x1387/0x2070 fs/namespace.c:3192
do_mount fs/namespace.c:3205 [inline]
__do_sys_mount fs/namespace.c:3413 [inline]
__se_sys_mount fs/namespace.c:3390 [inline]
__x64_sys_mount+0x27f/0x300 fs/namespace.c:3390
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9

which is oopsing on this line:

inode_lock(root->d_inode);

presumably because sb->s_root was NULL.

Fixes: 0da0b7fd73e4 ("afs: Display manually added cells in dynamic root mount")
Reported-by: syzbot+c1eff8205244ae7e11a6@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
"One regression from 5.8 and a few bugs from earlier kernels:

   - Various spelling corrections in kernel prints

   - Bug fixes in hfi1 and bntx_re

   - Revert a 5.8 patch in hns

   - Batch update for Mellanox and Cumulus maintainers emails"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  MAINTAINERS: Update Mellanox and Cumulus Network addresses to new domain
  Revert "RDMA/hns: Reserve one sge in order to avoid local length error"
  RDMA/hfi1: Correct an interlock issue for TID RDMA WRITE request
  RDMA/bnxt_re: Do not add user qps to flushlist
  RDMA/core: Fix spelling mistake "Could't" -> "Couldn't"
  RDMA/usnic: Fix spelling mistake "transistion" -> "transition"
  RDMA/hns: Fix spelling mistake "epmty" -> "empty"

Merge tag 'sound-5.9-rc2' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"A collection of small fixes over several drivers, but all are driver-
  specific and nothing looks scary.

  Slightly large changes are seen in ASoC qcom driver for the bugs that
  were revealed by the recent ASoC core change to report the invalid
  register access errors. Also ASoC fsl got a slight intensive change
  for the distortion fix.

  Others are only trivial fixes or device-specific quirks"

* tag 'sound-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
  ALSA: hda: avoid reset of sdo_limit
  ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion
  ALSA: usb-audio: ignore broken processing/extension unit
  ASoC: intel: Fix memleak in sst_media_open
  ASoC: wm8994: Avoid attempts to read unreadable registers
  ASoC: msm8916-wcd-analog: fix register Interrupt offset
  ASoC: wm8994: Prevent access to invalid VU register bits on WM1811
  ALSA: hda/realtek: Add model alc298-samsung-headphone
  ALSA: usb-audio: Update documentation comment for MS2109 quirk
  ALSA: isa: fix spelling mistakes in the comments
  ALSA: usb-audio: Add capture support for Saffire 6 (USB 1.1)
  ALSA: hda/realtek: Add quirk for Samsung Galaxy Flex Book
  ASoC: q6routing: add dummy register read/write function
  ASoC: q6afe-dai: mark all widgets registers as SND_SOC_NOPM
  ASoC: Make soc_component_read() returning an error code again
  ASoC: amd: Replacing component->name with codec_dai->name.
  ASoC: fsl: Fix unused variable warning
  ASoC: tegra: tegra210_i2s: Fix compile warning with CONFIG_PM=n
  ASoC: tegra: tegra210_dmic: Fix compile warning with CONFIG_PM=n
  ASoC: tegra: tegra210_ahub: Fix compile warning with CONFIG_PM=n
  ...

Merge tag 'drm-fixes-2020-08-21' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Regular fixes pull for rc2. Usual rc2 doesn't seem too busy, mainly
  i915 and amdgpu. I'd expect the usual uptick for rc3.

  amdgpu:
   - Fix allocation size
   - SR-IOV fixes
   - Vega20 SMU feature state caching fix
   - Fix custom pptable handling
   - Arcturus golden settings update
   - Several display fixes
   - Fixes for Navy Flounder
   - Misc display fixes
   - RAS fix

  amdkfd:
   - SDMA fix for renoir

  i915:
   - Fix device parameter usage for selftest mock i915 device
   - Fix LPSP capability debugfs NULL dereference
   - Fix buddy register pagemask table
   - Fix intel_atomic_check() non-negative return value
   - Fix selftests passing a random 0 into ilog2()
   - Fix TGL power well enable/disable ordering
   - Switch to PMU module refcounting
   - GVT fixes

  virtio:
   - Add missing dma_fence_put() in virtio_gpu_execbuffer_ioctl()
   - Fix memory leak in virtio_gpu_cleanup_object()"

* tag 'drm-fixes-2020-08-21' of git://anongit.freedesktop.org/drm/drm: (34 commits)
  Revert "drm/amdgpu: disable gfxoff for navy_flounder"
  drm/i915/tgl: Make sure TC-cold is blocked before enabling TC AUX power wells
  drm/i915/selftests: Avoid passing a random 0 into ilog2
  drm/i915: Fix wrong return value in intel_atomic_check()
  drm/i915: Update bw_buddy pagemask table
  drm/i915/display: Check for an LPSP encoder before dereferencing
  drm/i915: Copy default modparams to mock i915_device
  drm/i915: Provide the perf pmu.module
  drm/amd/display: fix pow() crashing when given base 0
  drm/amd/display: Reset scrambling on Test Pattern
  drm/amd/display: fix dcn3 wide timing dsc validation
  drm/amd/display: Fix DFPstate hang due to view port changed
  drm/amd/display: Assign correct left shift
  drm/amd/display: Call DMUB for eDP power control
  drm/amdkfd: fix the wrong sdma instance query for renoir
  drm/amdgpu: parse ta firmware for navy_flounder
  drm/amdgpu: fix NULL pointer access issue when unloading driver
  drm/amdgpu: fix uninit-value in arcturus_log_thermal_throttling_event()
  drm/amdgpu: disable gfxoff for navy_flounder
  drm/amdgpu/display: use GFP_ATOMIC in dcn20_validate_bandwidth_internal
  ...

mm, page_alloc: fix core hung in free_pcppages_bulk()

The following race is observed with the repeated online, offline and a
delay between two successive online of memory blocks of movable zone.

P1 P2

Online the first memory block in
the movable zone. The pcp struct
values are initialized to default
values,i.e., pcp->high = 0 &
pcp->batch = 1.

Allocate the pages from the
movable zone.

Try to Online the second memory
block in the movable zone thus it
entered the online_pages() but yet
to call zone_pcp_update().
This process is entered into
the exit path thus it tries
to release the order-0 pages
to pcp lists through
free_unref_page_commit().
As pcp->high = 0, pcp->count = 1
proceed to call the function
free_pcppages_bulk().
Update the pcp values thus the
new pcp values are like, say,
pcp->high = 378, pcp->batch = 63.
Read the pcp's batch value using
READ_ONCE() and pass the same to
free_pcppages_bulk(), pcp values
passed here are, batch = 63,
count = 1.

Since num of pages in the pcp
lists are less than ->batch,
then it will stuck in
while(list_empty(list)) loop
with interrupts disabled thus
a core hung.

Avoid this by ensuring free_pcppages_bulk() is called with proper count of
pcp list pages.

The mentioned race is some what easily reproducible without [1] because
pcp's are not updated for the first memory block online and thus there is
a enough race window for P2 between alloc+free and pcp struct values
update through onlining of second memory block.

With [1], the race still exists but it is very narrow as we update the pcp
struct values for the first memory block online itself.

This is not limited to the movable zone, it could also happen in cases
with the normal zone (e.g., hotplug to a node that only has DMA memory, or
no other memory yet).

[1]: https://patchwork.kernel.org/patch/11696389/

Fixes: 5f8dcc21211a ("page-allocator: split per-cpu list into one-list-per-migrate-type")
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: <stable@vger.kernel.org> [2.6+]
Link: http://lkml.kernel.org/r/1597150703-19003-1-git-send-email-charante@codeaurora.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: include CMA pages in lowmem_reserve at boot

The lowmem_reserve arrays provide a means of applying pressure against
allocations from lower zones that were targeted at higher zones.  Its
values are a function of the number of pages managed by higher zones and
are assigned by a call to the setup_per_zone_lowmem_reserve() function.

The function is initially called at boot time by the function
init_per_zone_wmark_min() and may be called later by accesses of the
/proc/sys/vm/lowmem_reserve_ratio sysctl file.

The function init_per_zone_wmark_min() was moved up from a module_init to
a core_initcall to resolve a sequencing issue with khugepaged.
Unfortunately this created a sequencing issue with CMA page accounting.

The CMA pages are added to the managed page count of a zone when
cma_init_reserved_areas() is called at boot also as a core_initcall.  This
makes it uncertain whether the CMA pages will be added to the managed page
counts of their zones before or after the call to
init_per_zone_wmark_min() as it becomes dependent on link order.  With the
current link order the pages are added to the managed count after the
lowmem_reserve arrays are initialized at boot.

This means the lowmem_reserve values at boot may be lower than the values
used later if /proc/sys/vm/lowmem_reserve_ratio is accessed even if the
ratio values are unchanged.

In many cases the difference is not significant, but for example
an ARM platform with 1GB of memory and the following memory layout

  cma: Reserved 256 MiB at 0x0000000030000000
  Zone ranges:
    DMA      [mem 0x0000000000000000-0x000000002fffffff]
    Normal   empty
    HighMem  [mem 0x0000000030000000-0x000000003fffffff]

would result in 0 lowmem_reserve for the DMA zone.  This would allow
userspace to deplete the DMA zone easily.

Funnily enough

  $ cat /proc/sys/vm/lowmem_reserve_ratio

would fix up the situation because as a side effect it forces
setup_per_zone_lowmem_reserve.

This commit breaks the link order dependency by invoking
init_per_zone_wmark_min() as a postcore_initcall so that the CMA pages
have the chance to be properly accounted in their zone(s) and allowing
the lowmem_reserve arrays to receive consistent values.

Fixes: bc22af74f271 ("mm: update min_free_kbytes from khugepaged after core initialization")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1597423766-27849-1-git-send-email-opendmb@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

squashfs: avoid bio_alloc() failure with 1Mbyte blocks

This is a regression introduced by the patch "migrate from ll_rw_block
usage to BIO".

Bio_alloc() is limited to 256 pages (1 Mbyte). This can cause a failure
when reading 1 Mbyte block filesystems. The problem is a datablock can be
fully (or almost uncompressed), requiring 256 pages, but, because blocks
are not aligned to page boundaries, it may require 257 pages to read.

Bio_kmalloc() can handle 1024 pages, and so use this for the edge
condition.

Fixes: 93e72b3c612a ("squashfs: migrate from ll_rw_block usage to BIO")
Reported-by: Nicolas Prochazka <nicolas.prochazka@gmail.com>
Reported-by: Tomoatsu Shimada <shimada@walbrix.com>
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Cc: Philippe Liard <pliard@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Adrien Schildknecht <adrien+dev@schischi.me>
Cc: Daniel Rosenberg <drosen@google.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200815035637.15319-1-phillip@squashfs.org.uk
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uprobes: __replace_page() avoid BUG in munlock_vma_page()

syzbot crashed on the VM_BUG_ON_PAGE(PageTail) in munlock_vma_page(), when
called from uprobes __replace_page(). Which of many ways to fix it?
Settled on not calling when PageCompound (since Head and Tail are equals
in this context, PageCompound the usual check in uprobes.c, and the prior
use of FOLL_SPLIT_PMD will have cleared PageMlocked already).

Fixes: 5a52c9df62b4 ("uprobe: use FOLL_SPLIT_PMD instead of FOLL_SPLIT")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org> [5.4+]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008161338360.20413@eggly.anvils
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/relay.c: fix memleak on destroy relay channel

kmemleak report memory leak as follows:

  unreferenced object 0x607ee4e5f948 (size 8):
  comm "syz-executor.1", pid 2098, jiffies 4295031601 (age 288.468s)
  hex dump (first 8 bytes):
  00 00 00 00 00 00 00 00 ........
  backtrace:
     relay_open kernel/relay.c:583 [inline]
     relay_open+0xb6/0x970 kernel/relay.c:563
     do_blk_trace_setup+0x4a8/0xb20 kernel/trace/blktrace.c:557
     __blk_trace_setup+0xb6/0x150 kernel/trace/blktrace.c:597
     blk_trace_ioctl+0x146/0x280 kernel/trace/blktrace.c:738
     blkdev_ioctl+0xb2/0x6a0 block/ioctl.c:613
     block_ioctl+0xe5/0x120 fs/block_dev.c:1871
     vfs_ioctl fs/ioctl.c:48 [inline]
     __do_sys_ioctl fs/ioctl.c:753 [inline]
     __se_sys_ioctl fs/ioctl.c:739 [inline]
     __x64_sys_ioctl+0x170/0x1ce fs/ioctl.c:739
     do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
     entry_SYSCALL_64_after_hwframe+0x44/0xa9

'chan->buf' is malloced in relay_open() by alloc_percpu() but not free
while destroy the relay channel.  Fix it by adding free_percpu() before
return from relay_destroy_channel().

Fixes: 017c59c042d0 ("relay: Use per CPU constructs for the relay channel buffer pointers")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: David Rientjes <rientjes@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Akash Goel <akash.goel@intel.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200817122826.48518-1-weiyongjun1@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

romfs: fix uninitialized memory leak in romfs_dev_read()

romfs has a superblock field that limits the size of the filesystem; data
beyond that limit is never accessed.

romfs_dev_read() fetches a caller-supplied number of bytes from the
backing device. It returns 0 on success or an error code on failure;
therefore, its API can't represent short reads, it's all-or-nothing.

However, when romfs_dev_read() detects that the requested operation would
cross the filesystem size limit, it currently silently truncates the
requested number of bytes. This e.g. means that when the content of a
file with size 0x1000 starts one byte before the filesystem size limit,
->readpage() will only fill a single byte of the supplied page while
leaving the rest uninitialized, leaking that uninitialized memory to
userspace.

Fix it by returning an error code instead of truncating the read when the
requested read operation would go beyond the end of the filesystem.

Fixes: da4458bda237 ("NOMMU: Make it possible for RomFS to use MTD devices directly")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200818013202.2246365-1-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/rodata_test.c: fix missing function declaration

The compilation with CONFIG_DEBUG_RODATA_TEST set produces the following
warning due to the missing include.

mm/rodata_test.c:15:6: warning: no previous prototype for 'rodata_test' [-Wmissing-prototypes]
15 | void rodata_test(void)
| ^~~~~~~~~~~

Fixes: 2959a5f726f6 ("mm: add arch-independent testcases for RODATA")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lkml.kernel.org/r/20200819080026.918134-1-leon@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vunmap: add cond_resched() in vunmap_pmd_range

Like zap_pte_range add cond_resched so that we can avoid softlockups as
reported below.  On non-preemptible kernel with large I/O map region (like
the one we get when using persistent memory with sector mode), an unmap of
the namespace can report below softlockups.

22724.027334] watchdog: BUG: soft lockup - CPU#49 stuck for 23s! [ndctl:50777]
NIP [c0000000000dc224] plpar_hcall+0x38/0x58
LR [c0000000000d8898] pSeries_lpar_hpte_invalidate+0x68/0xb0
Call Trace:
    flush_hash_page+0x114/0x200
    hpte_need_flush+0x2dc/0x540
    vunmap_page_range+0x538/0x6f0
    free_unmap_vmap_area+0x30/0x70
    remove_vm_area+0xfc/0x140
    __vunmap+0x68/0x270
    __iounmap.part.0+0x34/0x60
    memunmap+0x54/0x70
    release_nodes+0x28c/0x300
    device_release_driver_internal+0x16c/0x280
    unbind_store+0x124/0x170
    drv_attr_store+0x44/0x60
    sysfs_kf_write+0x64/0x90
    kernfs_fop_write+0x1b0/0x290
    __vfs_write+0x3c/0x70
    vfs_write+0xd8/0x260
    ksys_write+0xdc/0x130
    system_call+0x5c/0x70

Reported-by: Harish Sriram <harish@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200807075933.310240-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

khugepaged: adjust VM_BUG_ON_MM() in __khugepaged_enter()

syzbot crashes on the VM_BUG_ON_MM(khugepaged_test_exit(mm), mm) in
__khugepaged_enter(): yes, when one thread is about to dump core, has set
core_state, and is waiting for others, another might do something calling
__khugepaged_enter(), which now crashes because I lumped the core_state
test (known as "mmget_still_valid") into khugepaged_test_exit(). I still
think it's best to lump them together, so just in this exceptional case,
check mm->mm_users directly instead of khugepaged_test_exit().

Fixes: bbe98f9cadff ("khugepaged: khugepaged_test_exit() check mmget_still_valid()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Yang Shi <shy828301@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: <stable@vger.kernel.org> [4.8+]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008141503370.18085@eggly.anvils
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb_cgroup: convert comma to semicolon

Replace a comma between expression statements by a semicolon.

Fixes: faced7e0806cf4 ("mm: hugetlb controller for cgroups v2")
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Giuseppe Scrivano <gscrivan@redhat.com>
Link: http://lkml.kernel.org/r/20200818064333.21759-1-vulab@iscas.ac.cn
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mailmap: add Andi Kleen

I keep getting bounce back from the suse.de address.

Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Quentin Perret <qperret@qperret.net>
Link: http://lkml.kernel.org/r/20200818203214.659955-1-ndesaulniers@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

core/entry: Respect syscall number rewrites

The transcript of the x86 entry code to the generic version failed to
reload the syscall number from ptregs after ptrace and seccomp have run,
which both can modify the syscall number in ptregs. It returns the original
syscall number instead which is obviously not the right thing to do.

Reload the syscall number to fix that.

Fixes: 142781e108b1 ("entry: Provide generic syscall entry functionality")
Reported-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kyle Huey <me@kylehuey.com>
Tested-by: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/87blj6ifo8.fsf@nanos.tec.linutronix.de

x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM

KVM has an optmization to avoid expensive MRS read/writes on
VMENTER/EXIT. It caches the MSR values and restores them either when
leaving the run loop, on preemption or when going out to user space.

The affected MSRs are not required for kernel context operations. This
changed with the recently introduced mechanism to handle FSGSBASE in the
paranoid entry code which has to retrieve the kernel GSBASE value by
accessing per CPU memory. The mechanism needs to retrieve the CPU number
and uses either LSL or RDPID if the processor supports it.

Unfortunately RDPID uses MSR_TSC_AUX which is in the list of cached and
lazily restored MSRs, which means between the point where the guest value
is written and the point of restore, MSR_TSC_AUX contains a random number.

If an NMI or any other exception which uses the paranoid entry path happens
in such a context, then RDPID returns the random guest MSR_TSC_AUX value.

As a consequence this reads from the wrong memory location to retrieve the
kernel GSBASE value. Kernel GS is used to for all regular this_cpu_*()
operations. If the GSBASE in the exception handler points to the per CPU
memory of a different CPU then this has the obvious consequences of data
corruption and crashes.

As the paranoid entry path is the only place which accesses MSR_TSX_AUX
(via RDPID) and the fallback via LSL is not significantly slower, remove
the RDPID alternative from the entry path and always use LSL.

The alternative would be to write MSR_TSC_AUX on every VMENTER and VMEXIT
which would be inflicting massive overhead on that code path.

[ tglx: Rewrote changelog ]

Fixes: eaad981291ee3 ("x86/entry/64: Introduce the FIND_PERCPU_BASE macro")
Reported-by: Tom Lendacky <thomas.lendacky@amd.com>
Debugged-by: Tom Lendacky <thomas.lendacky@amd.com>
Suggested-by: Andy Lutomirski <luto@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200821105229.18938-1-pbonzini@redhat.com

MAINTAINERS: Update Mellanox and Cumulus Network addresses to new domain

Mellanox and Cumulus Network were acquired by Nvidia, so change the
maintainers emails to new domain name.

Link: https://lore.kernel.org/r/20200810091100.243932-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>