Yuiko Oshino [Wed, 1 Mar 2023 15:43:07 +0000 (08:43 -0700)]
net: lan78xx: fix accessing the LAN7800's internal phy specific registers from the MAC driver
[ Upstream commit
e57cf3639c323eeed05d3725fd82f91b349adca8 ]
Move the LAN7800 internal phy (phy ID 0x0007c132) specific register
accesses to the phy driver (microchip.c).
Fix the error reported by Enguerrand de Ribaucourt in December 2022,
"Some operations during the cable switch workaround modify the register
LAN88XX_INT_MASK of the PHY. However, this register is specific to the
LAN8835 PHY. For instance, if a DP8322I PHY is connected to the LAN7801,
that register (0x19), corresponds to the LED and MAC address
configuration, resulting in unapropriate behavior."
I did not test with the DP8322I PHY, but I tested with an EVB-LAN7800
with the internal PHY.
Fixes:
14437e3fa284 ("lan78xx: workaround of forced 100 Full/Half duplex mode error")
Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230301154307.30438-1-yuiko.oshino@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Changbin Du [Thu, 2 Mar 2023 03:11:44 +0000 (11:11 +0800)]
perf stat: Fix counting when initial delay configured
[ Upstream commit
25f69c69bc3ca8c781a94473f28d443d745768e3 ]
When creating counters with initial delay configured, the enable_on_exec
field is not set. So we need to enable the counters later. The problem
is, when a workload is specified the target__none() is true. So we also
need to check stat_config.initial_delay.
In this change, we add a new field 'initial_delay' for struct target
which could be shared by other subcommands. And define
target__enable_on_exec() which returns whether enable_on_exec should be
set on normal cases.
Before this fix the event is not counted:
$ ./perf stat -e instructions -D 100 sleep 2
Events disabled
Events enabled
Performance counter stats for 'sleep 2':
<not counted> instructions
1.
901661124 seconds time elapsed
0.
001602000 seconds user
0.
000000000 seconds sys
After fix it works:
$ ./perf stat -e instructions -D 100 sleep 2
Events disabled
Events enabled
Performance counter stats for 'sleep 2':
404,214 instructions
1.
901743475 seconds time elapsed
0.
001617000 seconds user
0.
000000000 seconds sys
Fixes:
c587e77e100fa40e ("perf stat: Do not delay the workload with --delay")
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hui Wang <hw.huiwang@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230302031146.2801588-2-changbin.du@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Brian Vazquez [Wed, 1 Mar 2023 13:32:47 +0000 (13:32 +0000)]
net: use indirect calls helpers for sk_exit_memory_pressure()
[ Upstream commit
5c1ebbfabcd61142a4551bfc0e51840f9bdae7af ]
Florian reported a regression and sent a patch with the following
changelog:
<quote>
There is a noticeable tcp performance regression (loopback or cross-netns),
seen with iperf3 -Z (sendfile mode) when generic retpolines are needed.
With SK_RECLAIM_THRESHOLD checks gone number of calls to enter/leave
memory pressure happen much more often. For TCP indirect calls are
used.
We can't remove the if-set-return short-circuit check in
tcp_enter_memory_pressure because there are callers other than
sk_enter_memory_pressure. Doing a check in the sk wrapper too
reduces the indirect calls enough to recover some performance.
Before,
0.00-60.00 sec 322 GBytes 46.1 Gbits/sec receiver
After:
0.00-60.04 sec 359 GBytes 51.4 Gbits/sec receiver
"iperf3 -c $peer -t 60 -Z -f g", connected via veth in another netns.
</quote>
It seems we forgot to upstream this indirect call mitigation we
had for years, lets do this instead.
[edumazet] - It seems we forgot to upstream this indirect call
mitigation we had for years, let's do this instead.
- Changed to INDIRECT_CALL_INET_1() to avoid bots reports.
Fixes:
4890b686f408 ("net: keep sk->sk_forward_alloc as small as possible")
Reported-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/netdev/20230227152741.4a53634b@kernel.org/T/
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230301133247.2346111-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hangyu Hua [Tue, 28 Feb 2023 02:33:44 +0000 (10:33 +0800)]
net: tls: fix possible race condition between do_tls_getsockopt_conf() and do_tls_setsockopt_conf()
[ Upstream commit
49c47cc21b5b7a3d8deb18fc57b0aa2ab1286962 ]
ctx->crypto_send.info is not protected by lock_sock in
do_tls_getsockopt_conf(). A race condition between do_tls_getsockopt_conf()
and error paths of do_tls_setsockopt_conf() may lead to a use-after-free
or null-deref.
More discussion: https://lore.kernel.org/all/Y/ht6gQL+u6fj3dG@hog/
Fixes:
3c4d7559159b ("tls: kernel TLS support")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20230228023344.9623-1-hbh25y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pablo Neira Ayuso [Tue, 28 Feb 2023 19:43:02 +0000 (20:43 +0100)]
netfilter: nft_quota: copy content when cloning expression
[ Upstream commit
aabef97a35160461e9c576848ded737558d89055 ]
If the ruleset contains consumed quota, restore them accordingly.
Otherwise, listing after restoration shows never used items.
Restore the user-defined quota and flags too.
Fixes:
ed0a0c60f0e5 ("netfilter: nft_quota: move stateful fields out of expression data")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pablo Neira Ayuso [Tue, 28 Feb 2023 16:09:03 +0000 (17:09 +0100)]
netfilter: nft_last: copy content when cloning expression
[ Upstream commit
860e874290fb3be08e966c9c8ffc510c5b0f2bd8 ]
If the ruleset contains last timestamps, restore them accordingly.
Otherwise, listing after restoration shows never used items.
Fixes:
33a24de37e81 ("netfilter: nft_last: move stateful fields out of expression data")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hangbin Liu [Mon, 27 Feb 2023 09:36:46 +0000 (17:36 +0800)]
selftests: nft_nat: ensuring the listening side is up before starting the client
[ Upstream commit
2067e7a00aa604b94de31d64f29b8893b1696f26 ]
The test_local_dnat_portonly() function initiates the client-side as
soon as it sets the listening side to the background. This could lead to
a race condition where the server may not be ready to listen. To ensure
that the server-side is up and running before initiating the
client-side, a delay is introduced to the test_local_dnat_portonly()
function.
Before the fix:
# ./nft_nat.sh
PASS: netns routing/connectivity: ns0-rthlYrBU can reach ns1-rthlYrBU and ns2-rthlYrBU
PASS: ping to ns1-rthlYrBU was ip NATted to ns2-rthlYrBU
PASS: ping to ns1-rthlYrBU OK after ip nat output chain flush
PASS: ipv6 ping to ns1-rthlYrBU was ip6 NATted to ns2-rthlYrBU
2023/02/27 04:11:03 socat[6055] E connect(5, AF=2 10.0.1.99:2000, 16): Connection refused
ERROR: inet port rewrite
After the fix:
# ./nft_nat.sh
PASS: netns routing/connectivity: ns0-9sPJV6JJ can reach ns1-9sPJV6JJ and ns2-9sPJV6JJ
PASS: ping to ns1-9sPJV6JJ was ip NATted to ns2-9sPJV6JJ
PASS: ping to ns1-9sPJV6JJ OK after ip nat output chain flush
PASS: ipv6 ping to ns1-9sPJV6JJ was ip6 NATted to ns2-9sPJV6JJ
PASS: inet port rewrite without l3 address
Fixes:
282e5f8fe907 ("netfilter: nat: really support inet nat without l3 address")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Horatiu Vultur [Tue, 28 Feb 2023 20:47:42 +0000 (21:47 +0100)]
net: lan966x: Fix port police support using tc-matchall
[ Upstream commit
81563d8548b0478075c720666be348d4199b8591 ]
When the police was removed from the port, then it was trying to
remove the police from the police id and not from the actual
police index.
The police id represents the id of the police and police index
represents the position in HW where the police is situated.
The port police id can be any number while the port police index
is a number based on the port chip port.
Fix this by deleting the police from HW that is situated at the
police index and not police id.
Fixes:
5390334b59a3 ("net: lan966x: Add port police support using tc-matchall")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Mon, 27 Feb 2023 15:30:24 +0000 (15:30 +0000)]
ila: do not generate empty messages in ila_xlat_nl_cmd_get_mapping()
[ Upstream commit
693aa2c0d9b6d5b1f2745d31b6e70d09dbbaf06e ]
ila_xlat_nl_cmd_get_mapping() generates an empty skb,
triggerring a recent sanity check [1].
Instead, return an error code, so that user space
can get it.
[1]
skb_assert_len
WARNING: CPU: 0 PID: 5923 at include/linux/skbuff.h:2527 skb_assert_len include/linux/skbuff.h:2527 [inline]
WARNING: CPU: 0 PID: 5923 at include/linux/skbuff.h:2527 __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
Modules linked in:
CPU: 0 PID: 5923 Comm: syz-executor269 Not tainted 6.2.0-syzkaller-18300-g2ebd1fbb946d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/21/2023
pstate:
60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : skb_assert_len include/linux/skbuff.h:2527 [inline]
pc : __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
lr : skb_assert_len include/linux/skbuff.h:2527 [inline]
lr : __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
sp :
ffff80001e0d6c40
x29:
ffff80001e0d6e60 x28:
dfff800000000000 x27:
ffff0000c86328c0
x26:
dfff800000000000 x25:
ffff0000c8632990 x24:
ffff0000c8632a00
x23:
0000000000000000 x22:
1fffe000190c6542 x21:
ffff0000c8632a10
x20:
ffff0000c8632a00 x19:
ffff80001856e000 x18:
ffff80001e0d5fc0
x17:
0000000000000000 x16:
ffff80001235d16c x15:
0000000000000000
x14:
0000000000000000 x13:
0000000000000001 x12:
0000000000000001
x11:
ff80800008353a30 x10:
0000000000000000 x9 :
21567eaf25bfb600
x8 :
21567eaf25bfb600 x7 :
0000000000000001 x6 :
0000000000000001
x5 :
ffff80001e0d6558 x4 :
ffff800015c74760 x3 :
ffff800008596744
x2 :
0000000000000001 x1 :
0000000100000000 x0 :
000000000000000e
Call trace:
skb_assert_len include/linux/skbuff.h:2527 [inline]
__dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
dev_queue_xmit include/linux/netdevice.h:3033 [inline]
__netlink_deliver_tap_skb net/netlink/af_netlink.c:307 [inline]
__netlink_deliver_tap+0x45c/0x6f8 net/netlink/af_netlink.c:325
netlink_deliver_tap+0xf4/0x174 net/netlink/af_netlink.c:338
__netlink_sendskb net/netlink/af_netlink.c:1283 [inline]
netlink_sendskb+0x6c/0x154 net/netlink/af_netlink.c:1292
netlink_unicast+0x334/0x8d4 net/netlink/af_netlink.c:1380
nlmsg_unicast include/net/netlink.h:1099 [inline]
genlmsg_unicast include/net/genetlink.h:433 [inline]
genlmsg_reply include/net/genetlink.h:443 [inline]
ila_xlat_nl_cmd_get_mapping+0x620/0x7d0 net/ipv6/ila/ila_xlat.c:493
genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline]
genl_rcv_msg+0x938/0xc1c net/netlink/genetlink.c:1065
netlink_rcv_skb+0x214/0x3c4 net/netlink/af_netlink.c:2574
genl_rcv+0x38/0x50 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x660/0x8d4 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x800/0xae0 net/netlink/af_netlink.c:1942
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0x558/0x844 net/socket.c:2479
___sys_sendmsg net/socket.c:2533 [inline]
__sys_sendmsg+0x26c/0x33c net/socket.c:2562
__do_sys_sendmsg net/socket.c:2571 [inline]
__se_sys_sendmsg net/socket.c:2569 [inline]
__arm64_sys_sendmsg+0x80/0x94 net/socket.c:2569
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52
el0_svc_common+0x138/0x258 arch/arm64/kernel/syscall.c:142
do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:193
el0_svc+0x58/0x168 arch/arm64/kernel/entry-common.c:637
el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
irq event stamp: 136484
hardirqs last enabled at (136483): [<
ffff800008350244>] __up_console_sem+0x60/0xb4 kernel/printk/printk.c:345
hardirqs last disabled at (136484): [<
ffff800012358d60>] el1_dbg+0x24/0x80 arch/arm64/kernel/entry-common.c:405
softirqs last enabled at (136418): [<
ffff800008020ea8>] softirq_handle_end kernel/softirq.c:414 [inline]
softirqs last enabled at (136418): [<
ffff800008020ea8>] __do_softirq+0xd4c/0xfa4 kernel/softirq.c:600
softirqs last disabled at (136371): [<
ffff80000802b4a4>] ____do_softirq+0x14/0x20 arch/arm64/kernel/irq.c:80
---[ end trace
0000000000000000 ]---
skb len=0 headroom=0 headlen=0 tailroom=192
mac=(0,0) net=(0,-1) trans=-1
shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0))
csum(0x0 ip_summed=0 complete_sw=0 valid=0 level=0)
hash(0x0 sw=0 l4=0) proto=0x0010 pkttype=6 iif=0
dev name=nlmon0 feat=0x0000000000005861
Fixes:
7f00feaf1076 ("ila: Add generic ILA translation facility")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Sat, 11 Feb 2023 23:12:11 +0000 (01:12 +0200)]
drm/msm/dpu: disable features unsupported by QCM2290
[ Upstream commit
a2a448b4d9bcb5bff0e0f687b7932a7be9ca898a ]
QCM2290 doesn't seem to support reg-dma, UBWC and CSC. Drop
corresponding features being incorrectly enabled for qcm2290.
Cc: Loic Poulain <loic.poulain@linaro.org>
Fixes:
5334087ee743 ("drm/msm: add support for QCM2290 MDSS")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/522209/
Link: https://lore.kernel.org/r/20230211231259.1308718-3-dmitry.baryshkov@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jakub Kicinski [Mon, 27 Feb 2023 18:12:01 +0000 (10:12 -0800)]
tls: rx: fix return value for async crypto
[ Upstream commit
4d42cd6bc2ac1b9be50ade13771daec90c9d18b1 ]
Gaurav reports that TLS Rx is broken with async crypto
accelerators. The commit under fixes missed updating
the retval byte counting logic when updating how records
are stored. Even tho both before and after the change
'decrypted' was updated inside the main loop, it was
completely overwritten when processing the async
completions. Now that the rx_list only holds
non-zero-copy records we need to add, not overwrite.
Reported-and-bisected-by: Gaurav Jain <gaurav.jain@nxp.com>
Fixes:
cbbdee9918a2 ("tls: rx: async: don't put async zc on the list")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217064
Tested-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230227181201.1793772-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Oltean [Fri, 24 Feb 2023 15:59:39 +0000 (17:59 +0200)]
powerpc: dts: t1040rdb: fix compatible string for Rev A boards
[ Upstream commit
ae44f1c9d1fc54aeceb335fedb1e73b2c3ee4561 ]
It looks like U-Boot fails to start the kernel properly when the
compatible string of the board isn't fsl,T1040RDB, so stop overriding it
from the rev-a.dts.
Fixes:
5ebb74749202 ("powerpc: dts: t1040rdb: fix ports names for Seville Ethernet switch")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kang Chen [Mon, 27 Feb 2023 09:30:37 +0000 (17:30 +0800)]
nfc: fdp: add null check of devm_kmalloc_array in fdp_nci_i2c_read_device_properties
[ Upstream commit
11f180a5d62a51b484e9648f9b310e1bd50b1a57 ]
devm_kmalloc_array may fails, *fw_vsc_cfg might be null and cause
out-of-bounds write in device_property_read_u8_array later.
Fixes:
a06347c04c13 ("NFC: Add Intel Fields Peak NFC solution driver")
Signed-off-by: Kang Chen <void0red@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230227093037.907654-1-void0red@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafał Miłecki [Mon, 27 Feb 2023 09:11:56 +0000 (10:11 +0100)]
bgmac: fix *initial* chip reset to support BCM5358
[ Upstream commit
f99e6d7c4ed3be2531bd576425a5bd07fb133bd7 ]
While bringing hardware up we should perform a full reset including the
switch bit (BGMAC_BCMA_IOCTL_SW_RESET aka SICF_SWRST). It's what
specification says and what reference driver does.
This seems to be critical for the BCM5358. Without this hardware doesn't
get initialized properly and doesn't seem to transmit or receive any
packets.
Originally bgmac was calling bgmac_chip_reset() before setting
"has_robosw" property which resulted in expected behaviour. That has
changed as a side effect of adding platform device support which
regressed BCM5358 support.
Fixes:
f6a95a24957a ("net: ethernet: bgmac: Add platform device support")
Cc: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230227091156.19509-1-zajec5@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Tue, 14 Feb 2023 02:09:56 +0000 (05:09 +0300)]
drm/msm/a5xx: fix context faults during ring switch
[ Upstream commit
32e7083429d46f29080626fe387ff90c086b1fbe ]
The rptr_addr is set in the preempt_init_ring(), which is called from
a5xx_gpu_init(). It uses shadowptr() to set the address, however the
shadow_iova is not yet initialized at that time. Move the rptr_addr
setting to the a5xx_preempt_hw_init() which is called after setting the
shadow_iova, getting the correct value for the address.
Fixes:
8907afb476ac ("drm/msm: Allow a5xx to mark the RPTR shadow as privileged")
Suggested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/522640/
Link: https://lore.kernel.org/r/20230214020956.164473-5-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Tue, 14 Feb 2023 02:09:55 +0000 (05:09 +0300)]
drm/msm/a5xx: fix the emptyness check in the preempt code
[ Upstream commit
b4fb748f0b734ce1d2e7834998cc599fcbd25d67 ]
Quoting Yassine: ring->memptrs->rptr is never updated and stays 0, so
the comparison always evaluates to false and get_next_ring always
returns ring 0 thinking it isn't empty.
Fix this by calling get_rptr() instead of reading rptr directly.
Reported-by: Yassine Oudjana <y.oudjana@protonmail.com>
Fixes:
b1fc2839d2f9 ("drm/msm: Implement preemption for A5XX targets")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/522642/
Link: https://lore.kernel.org/r/20230214020956.164473-4-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Tue, 14 Feb 2023 02:09:54 +0000 (05:09 +0300)]
drm/msm/a5xx: fix highest bank bit for a530
[ Upstream commit
141f66ebbfa17cc7e2075f06c50107da978c965b ]
A530 has highest bank bit equal to 15 (like A540). Fix values written to
REG_A5XX_RB_MODE_CNTL and REG_A5XX_TPL1_MODE_CNTL registers.
Fixes:
1d832ab30ce6 ("drm/msm/a5xx: Add support for Adreno 508, 509, 512 GPUs")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/522639/
Link: https://lore.kernel.org/r/20230214020956.164473-3-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Tue, 14 Feb 2023 02:09:53 +0000 (05:09 +0300)]
drm/msm/a5xx: fix setting of the CP_PREEMPT_ENABLE_LOCAL register
[ Upstream commit
a7a4c19c36de1e4b99b06e4060ccc8ab837725bc ]
Rather than writing CP_PREEMPT_ENABLE_GLOBAL twice, follow the vendor
kernel and set CP_PREEMPT_ENABLE_LOCAL register instead. a5xx_submit()
will override it during submission, but let's get the sequence correct.
Fixes:
b1fc2839d2f9 ("drm/msm: Implement preemption for A5XX targets")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/522638/
Link: https://lore.kernel.org/r/20230214020956.164473-2-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rob Clark [Wed, 15 Feb 2023 23:50:48 +0000 (15:50 -0800)]
drm/msm: Fix potential invalid ptr free
[ Upstream commit
8a86f213f4426f19511a16d886871805b35c3acf ]
The error path cleanup expects that chain and syncobj are either NULL or
valid pointers. But post_deps was not allocated with __GFP_ZERO.
Fixes:
ab723b7a992a ("drm/msm: Add syncobj support.")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Patchwork: https://patchwork.freedesktop.org/patch/523051/
Link: https://lore.kernel.org/r/20230215235048.1166484-1-robdclark@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiri Slaby (SUSE) [Mon, 31 Oct 2022 11:42:29 +0000 (12:42 +0100)]
drm/nouveau/kms/nv50: fix nv50_wndw_new_ prototype
[ Upstream commit
3638a820c5c3b52f327cebb174fd4274bee08aa7 ]
gcc-13 warns about mismatching types for enums. That revealed switched
arguments of nv50_wndw_new_():
drivers/gpu/drm/nouveau/dispnv50/wndw.c:696:1: error: conflicting types for 'nv50_wndw_new_' due to enum/integer mismatch; have 'int(const struct nv50_wndw_func *, struct drm_device *, enum drm_plane_type, const char *, int, const u32 *, u32, enum nv50_disp_interlock_type, u32, struct nv50_wndw **)'
drivers/gpu/drm/nouveau/dispnv50/wndw.h:36:5: note: previous declaration of 'nv50_wndw_new_' with type 'int(const struct nv50_wndw_func *, struct drm_device *, enum drm_plane_type, const char *, int, const u32 *, enum nv50_disp_interlock_type, u32, u32, struct nv50_wndw **)'
It can be barely visible, but the declaration says about the parameters
in the middle:
enum nv50_disp_interlock_type,
u32 interlock_data,
u32 heads,
While the definition states differently:
u32 heads,
enum nv50_disp_interlock_type interlock_type,
u32 interlock_data,
Unify/fix the declaration to match the definition.
Fixes:
53e0a3e70de6 ("drm/nouveau/kms/nv50-: simplify tracking of channel interlocks")
Cc: Martin Liska <mliska@suse.cz>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031114229.10289-1-jirislaby@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paulo Alcantara [Tue, 28 Feb 2023 22:01:54 +0000 (19:01 -0300)]
cifs: improve checking of DFS links over STATUS_OBJECT_NAME_INVALID
[ Upstream commit
b9ee2e307c6b06384b6f9e393a9b8e048e8fc277 ]
Do not map STATUS_OBJECT_NAME_INVALID to -EREMOTE under non-DFS
shares, or 'nodfs' mounts or CONFIG_CIFS_DFS_UPCALL=n builds.
Otherwise, in the slow path, get a referral to figure out whether it
is an actual DFS link.
This could be simply reproduced under a non-DFS share by running the
following
$ mount.cifs //srv/share /mnt -o ...
$ cat /mnt/$(printf '\U110000')
cat: '/mnt/'$'\364\220\200\200': Object is remote
Fixes:
c877ce47e137 ("cifs: reduce roundtrips on create/qinfo requests")
CC: stable@vger.kernel.org # 6.2
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jan Kara [Thu, 26 Jan 2023 11:22:21 +0000 (12:22 +0100)]
ext4: Fix possible corruption when moving a directory
[ Upstream commit
0813299c586b175d7edb25f56412c54b812d0379 ]
When we are renaming a directory to a different directory, we need to
update '..' entry in the moved directory. However nothing prevents moved
directory from being modified and even converted from the inline format
to the normal format. When such race happens the rename code gets
confused and we crash. Fix the problem by locking the moved directory.
CC: stable@vger.kernel.org
Fixes:
32f7f22c0b52 ("ext4: let ext4_rename handle inline dir")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230126112221.11866-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bart Van Assche [Fri, 10 Feb 2023 20:52:00 +0000 (12:52 -0800)]
scsi: core: Remove the /proc/scsi/${proc_name} directory earlier
[ Upstream commit
fc663711b94468f4e1427ebe289c9f05669699c9 ]
Remove the /proc/scsi/${proc_name} directory earlier to fix a race
condition between unloading and reloading kernel modules. This fixes a bug
introduced in 2009 by commit
77c019768f06 ("[SCSI] fix /proc memory leak in
the SCSI core").
Fix the following kernel warning:
proc_dir_entry 'scsi/scsi_debug' already registered
WARNING: CPU: 19 PID: 27986 at fs/proc/generic.c:376 proc_register+0x27d/0x2e0
Call Trace:
proc_mkdir+0xb5/0xe0
scsi_proc_hostdir_add+0xb5/0x170
scsi_host_alloc+0x683/0x6c0
sdebug_driver_probe+0x6b/0x2d0 [scsi_debug]
really_probe+0x159/0x540
__driver_probe_device+0xdc/0x230
driver_probe_device+0x4f/0x120
__device_attach_driver+0xef/0x180
bus_for_each_drv+0xe5/0x130
__device_attach+0x127/0x290
device_initial_probe+0x17/0x20
bus_probe_device+0x110/0x130
device_add+0x673/0xc80
device_register+0x1e/0x30
sdebug_add_host_helper+0x1a7/0x3b0 [scsi_debug]
scsi_debug_init+0x64f/0x1000 [scsi_debug]
do_one_initcall+0xd7/0x470
do_init_module+0xe7/0x330
load_module+0x122a/0x12c0
__do_sys_finit_module+0x124/0x1a0
__x64_sys_finit_module+0x46/0x50
do_syscall_64+0x38/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Link: https://lore.kernel.org/r/20230210205200.36973-3-bvanassche@acm.org
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Yi Zhang <yi.zhang@redhat.com>
Cc: stable@vger.kernel.org
Fixes:
77c019768f06 ("[SCSI] fix /proc memory leak in the SCSI core")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liao Chang [Sun, 29 Jan 2023 09:42:42 +0000 (17:42 +0800)]
riscv: Add header include guards to insn.h
[ Upstream commit
8ac6e619d9d51b3eb5bae817db8aa94e780a0db4 ]
Add header include guards to insn.h to prevent repeating declaration of
any identifiers in insn.h.
Fixes:
edde5584c7ab ("riscv: Add SW single-step support for KDB")
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Fixes:
c9c1af3f186a ("RISC-V: rename parse_asm.h to insn.h")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230129094242.282620-1-liaochang1@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yu Kuai [Fri, 17 Feb 2023 02:22:00 +0000 (10:22 +0800)]
block: fix scan partition for exclusively open device again
[ Upstream commit
e5cfefa97bccf956ea0bb6464c1f6c84fd7a8d9f ]
As explained in commit
36369f46e917 ("block: Do not reread partition table
on exclusively open device"), reread partition on the device that is
exclusively opened by someone else is problematic.
This patch will make sure partition scan will only be proceed if current
thread open the device exclusively, or the device is not opened
exclusively, and in the later case, other scanners and exclusive openers
will be blocked temporarily until partition scan is done.
Fixes:
10c70d95c0f2 ("block: remove the bd_openers checks in blk_drop_partitions")
Cc: <stable@vger.kernel.org>
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230217022200.3092987-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yu Kuai [Fri, 17 Feb 2023 02:21:59 +0000 (10:21 +0800)]
block: Revert "block: Do not reread partition table on exclusively open device"
[ Upstream commit
0f77b29ad14e34a89961f32edc87b92db623bb37 ]
This reverts commit
36369f46e91785688a5f39d7a5590e3f07981316.
This patch can't fix the problem in a corner case that device can be
opened exclusively after the checking and before blkdev_get_by_dev().
We'll use a new solution to fix the problem in the next patch, and
the new solution doesn't need to change apis.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230217022200.3092987-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of:
e5cfefa97bcc ("block: fix scan partition for exclusively open device again")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ville Syrjälä [Tue, 7 Feb 2023 06:43:36 +0000 (08:43 +0200)]
drm/i915: Populate encoder->devdata for DSI on icl+
[ Upstream commit
14e591a1930c2790fe862af5b01ee3ca587f752f ]
We now have some eDP+DSI dual panel systems floating around
where the DSI panel is the secondary LFP and thus needs to
consult "panel type 2" in VBT in order to locate all the
other panel type dependant stuff correctly.
To that end we need to pass in the devdata to
intel_bios_init_panel_late(), otherwise it'll just assume
we want the primary panel type. So let's try to just populate
the vbt.ports[] stuff and encoder->devdata for icl+ DSI
panels as well.
We can't do this on older platforms as there we risk a DSI
port aliasing with a HDMI/DP port, which is a totally legal
thing as the DSI ports live in their own little parallel
universe.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8016
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230207064337.18697-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit
ba00eb6a4bfbe5194ddda50730aba063951f8ce0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ville Syrjälä [Fri, 25 Nov 2022 17:31:49 +0000 (19:31 +0200)]
drm/i915: Do panel VBT init early if the VBT declares an explicit panel type
[ Upstream commit
3f9ffce5765d68775163b8b134c4d7f156b48eec ]
Lots of ADL machines out there with bogus VBTs that declare
two eDP child devices. In order for those to work we need to
figure out which power sequencer to use before we try the EDID
read. So let's do the panel VBT init early if we can, falling
back to the post-EDID init otherwise.
The post-EDID init panel_type=0xff approach of assuming the
power sequencer should already be enabled doesn't really work
with multiple eDP panels, and currently we just end up using
the same power sequencer for both eDP ports, which at least
confuses the wakeref tracking, and potentially also causes us
to toggle the VDD for the panel when we should not.
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125173156.31689-3-ville.syrjala@linux.intel.com
Stable-dep-of:
14e591a1930c ("drm/i915: Populate encoder->devdata for DSI on icl+")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ville Syrjälä [Fri, 25 Nov 2022 17:31:48 +0000 (19:31 +0200)]
drm/i915: Introduce intel_panel_init_alloc()
[ Upstream commit
f70f8153e3642337b444fbc0c64d546a46bbcd62 ]
Introduce a place where we can initialize connector->panel
after it's been allocated. We already have a intel_panel_init()
so had to get creative with the name and came up with
intel_panel_init_alloc().
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125173156.31689-2-ville.syrjala@linux.intel.com
Stable-dep-of:
14e591a1930c ("drm/i915: Populate encoder->devdata for DSI on icl+")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mika Westerberg [Wed, 15 Feb 2023 11:00:40 +0000 (13:00 +0200)]
spi: intel: Check number of chip selects after reading the descriptor
[ Upstream commit
574fbb95cd9d88bdc9c9c4c64223a38a61d7de9a ]
The flash decriptor contains the number of flash components that we use
to figure out how many flash chips there are connected. Therefore we
need to read it first before deciding how many chip selects the
controller has.
Reported-by: Marcin Witkowski <marcin.witkowski@intel.com>
Fixes:
3f03c618bebb ("spi: intel: Add support for second flash chip")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230215110040.42186-1-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corey Minyard [Wed, 25 Jan 2023 16:34:47 +0000 (10:34 -0600)]
ipmi:ssif: Add a timer between request retries
[ Upstream commit
00bb7e763ec9f384cb382455cb6ba5588b5375cf ]
The IPMI spec has a time (T6) specified between request retries. Add
the handling for that.
Reported by: Tony Camuso <tcamuso@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corey Minyard [Thu, 3 Nov 2022 20:03:11 +0000 (15:03 -0500)]
ipmi:ssif: Increase the message retry time
[ Upstream commit
39721d62bbc16ebc9bb2bdc2c163658f33da3b0b ]
The spec states that the minimum message retry time is 60ms, but it was
set to 20ms. Correct it.
Reported by: Tony Camuso <tcamuso@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Stable-dep-of:
00bb7e763ec9 ("ipmi:ssif: Add a timer between request retries")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corey Minyard [Wed, 25 Jan 2023 16:41:48 +0000 (10:41 -0600)]
ipmi:ssif: Remove rtc_us_timer
[ Upstream commit
9e8b89926fb87e5625bdde6fd5de2c31fb1d83bf ]
It was cruft left over from older handling of run to completion.
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Torokhov [Sat, 4 Feb 2023 00:43:29 +0000 (16:43 -0800)]
Input: exc3000 - properly stop timer on shutdown
[ Upstream commit
79c81d137d36f9635bbcbc3916c0cccb418a61dd ]
We need to stop the timer on driver unbind or probe failures, otherwise
we get UAF/Oops.
Fixes:
7e577a17f2ee ("Input: add I2C attached EETI EXC3000 multi touch driver")
Reported-by: "Stahl, Michael" <mstahl@moba.de>
Link: https://lore.kernel.org/r/Y9dK57BFqtlf8NmN@google.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manivannan Sadhasivam [Mon, 23 Jan 2023 07:29:45 +0000 (12:59 +0530)]
bus: mhi: ep: Change state_lock to mutex
[ Upstream commit
1ddc7618294084fff8d673217a9479550990ee84 ]
state_lock, the spinlock type is meant to protect race against concurrent
MHI state transitions. In mhi_ep_set_m0_state(), while the state_lock is
being held, the channels are resumed in mhi_ep_resume_channels() if the
previous state was M3. This causes sleeping in atomic bug, since
mhi_ep_resume_channels() use mutex internally.
Since the state_lock is supposed to be held throughout the state change,
it is not ideal to drop the lock before calling mhi_ep_resume_channels().
So to fix this issue, let's change the type of state_lock to mutex. This
would also allow holding the lock throughout all state transitions thereby
avoiding any potential race.
Cc: <stable@vger.kernel.org> # 5.19
Fixes:
e4b7b5f0f30a ("bus: mhi: ep: Add support for suspending and resuming channels")
Reported-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manivannan Sadhasivam [Wed, 28 Dec 2022 16:16:59 +0000 (21:46 +0530)]
bus: mhi: ep: Power up/down MHI stack during MHI RESET
[ Upstream commit
47a1dcaea07367c84238e71c08244ae3ed48c1cc ]
During graceful shutdown scenario, host will issue MHI RESET to the
endpoint device before initiating shutdown. In that case, it makes sense
to completely power down the MHI stack as sooner or later the access to
MMIO registers will be prohibited. Also, the stack needs to be powered
up in the case of SYS_ERR to recover the device.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20221228161704.255268-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Stable-dep-of:
1ddc76182940 ("bus: mhi: ep: Change state_lock to mutex")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jan Kara [Mon, 23 Jan 2023 13:29:15 +0000 (14:29 +0100)]
udf: Fix off-by-one error when discarding preallocation
[ Upstream commit
f54aa97fb7e5329a373f9df4e5e213ced4fc8759 ]
The condition determining whether the preallocation can be used had
an off-by-one error so we didn't discard preallocation when new
allocation was just following it. This can then confuse code in
inode_getblk().
CC: stable@vger.kernel.org
Fixes:
16d055656814 ("udf: Discard preallocation before extending file with a hole")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Aring [Thu, 12 Jan 2023 22:10:34 +0000 (17:10 -0500)]
fs: dlm: fix race setting stop tx flag
[ Upstream commit
164272113b685927126c938b4a9cbd2075eb15ee ]
This patch sets the stop tx flag before we commit the dlm message.
This flag will report about unexpected transmissions after we
send the DLM_FIN message out, which should be the last message sent.
When we commit the dlm fin message, it could be that we already
got an ack back and the CLOSED state change already happened.
We should not set this flag when we are in CLOSED state. To avoid this
race we simply set the tx flag before the state change can be in
progress by moving it before dlm_midcomms_commit_mhandle().
Cc: stable@vger.kernel.org
Fixes:
489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Aring [Thu, 12 Jan 2023 22:10:33 +0000 (17:10 -0500)]
fs: dlm: be sure to call dlm_send_queue_flush()
[ Upstream commit
7354fa4ef697191effedc2ae9a8293427708bbf5 ]
If we release a midcomms node structure, there should be nothing left
inside the dlm midcomms send queue. However, sometimes this is not true
because I believe some DLM_FIN message was not acked... if we run
into a shutdown timeout, then we should be sure there is no pending send
dlm message inside this queue when releasing midcomms node structure.
Cc: stable@vger.kernel.org
Fixes:
489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Aring [Thu, 27 Oct 2022 20:45:27 +0000 (16:45 -0400)]
fs: dlm: use WARN_ON_ONCE() instead of WARN_ON()
[ Upstream commit
775af207464bd28a2086f8399c0b2a3f1f40c7ae ]
To not get the console spammed about WARN_ON() of invalid states in the
dlm midcomms hot path handling we switch to WARN_ON_ONCE() to get it
only once that there might be an issue with the midcomms state handling.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Stable-dep-of:
7354fa4ef697 ("fs: dlm: be sure to call dlm_send_queue_flush()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Aring [Thu, 12 Jan 2023 22:10:32 +0000 (17:10 -0500)]
fs: dlm: fix use after free in midcomms commit
[ Upstream commit
724b6bab0d75f1dc01fdfbf7fe8d4217a5cb90ba ]
While working on processing dlm message in softirq context I experienced
the following KASAN use-after-free warning:
[ 151.760477] ==================================================================
[ 151.761803] BUG: KASAN: use-after-free in dlm_midcomms_commit_mhandle+0x19d/0x4b0
[ 151.763414] Read of size 4 at addr
ffff88811a980c60 by task lock_torture/1347
[ 151.765284] CPU: 7 PID: 1347 Comm: lock_torture Not tainted 6.1.0-rc4+ #2828
[ 151.766778] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.16.0-3.module+el8.7.0+16134+
e5908aa2 04/01/2014
[ 151.768726] Call Trace:
[ 151.769277] <TASK>
[ 151.769748] dump_stack_lvl+0x5b/0x86
[ 151.770556] print_report+0x180/0x4c8
[ 151.771378] ? kasan_complete_mode_report_info+0x7c/0x1e0
[ 151.772241] ? dlm_midcomms_commit_mhandle+0x19d/0x4b0
[ 151.773069] kasan_report+0x93/0x1a0
[ 151.773668] ? dlm_midcomms_commit_mhandle+0x19d/0x4b0
[ 151.774514] __asan_load4+0x7e/0xa0
[ 151.775089] dlm_midcomms_commit_mhandle+0x19d/0x4b0
[ 151.775890] ? create_message.isra.29.constprop.64+0x57/0xc0
[ 151.776770] send_common+0x19f/0x1b0
[ 151.777342] ? remove_from_waiters+0x60/0x60
[ 151.778017] ? lock_downgrade+0x410/0x410
[ 151.778648] ? __this_cpu_preempt_check+0x13/0x20
[ 151.779421] ? rcu_lockdep_current_cpu_online+0x88/0xc0
[ 151.780292] _convert_lock+0x46/0x150
[ 151.780893] convert_lock+0x7b/0xc0
[ 151.781459] dlm_lock+0x3ac/0x580
[ 151.781993] ? 0xffffffffc0540000
[ 151.782522] ? torture_stop+0x120/0x120 [dlm_locktorture]
[ 151.783379] ? dlm_scan_rsbs+0xa70/0xa70
[ 151.784003] ? preempt_count_sub+0xd6/0x130
[ 151.784661] ? is_module_address+0x47/0x70
[ 151.785309] ? torture_stop+0x120/0x120 [dlm_locktorture]
[ 151.786166] ? 0xffffffffc0540000
[ 151.786693] ? lockdep_init_map_type+0xc3/0x360
[ 151.787414] ? 0xffffffffc0540000
[ 151.787947] torture_dlm_lock_sync.isra.3+0xe9/0x150 [dlm_locktorture]
[ 151.789004] ? torture_stop+0x120/0x120 [dlm_locktorture]
[ 151.789858] ? 0xffffffffc0540000
[ 151.790392] ? lock_torture_cleanup+0x20/0x20 [dlm_locktorture]
[ 151.791347] ? delay_tsc+0x94/0xc0
[ 151.791898] torture_ex_iter+0xc3/0xea [dlm_locktorture]
[ 151.792735] ? torture_start+0x30/0x30 [dlm_locktorture]
[ 151.793606] lock_torture+0x177/0x270 [dlm_locktorture]
[ 151.794448] ? torture_dlm_lock_sync.isra.3+0x150/0x150 [dlm_locktorture]
[ 151.795539] ? lock_torture_stats+0x80/0x80 [dlm_locktorture]
[ 151.796476] ? do_raw_spin_lock+0x11e/0x1e0
[ 151.797152] ? mark_held_locks+0x34/0xb0
[ 151.797784] ? _raw_spin_unlock_irqrestore+0x30/0x70
[ 151.798581] ? __kthread_parkme+0x79/0x110
[ 151.799246] ? trace_preempt_on+0x2a/0xf0
[ 151.799902] ? __kthread_parkme+0x79/0x110
[ 151.800579] ? preempt_count_sub+0xd6/0x130
[ 151.801271] ? __kasan_check_read+0x11/0x20
[ 151.801963] ? __kthread_parkme+0xec/0x110
[ 151.802630] ? lock_torture_stats+0x80/0x80 [dlm_locktorture]
[ 151.803569] kthread+0x192/0x1d0
[ 151.804104] ? kthread_complete_and_exit+0x30/0x30
[ 151.804881] ret_from_fork+0x1f/0x30
[ 151.805480] </TASK>
[ 151.806111] Allocated by task 1347:
[ 151.806681] kasan_save_stack+0x26/0x50
[ 151.807308] kasan_set_track+0x25/0x30
[ 151.807920] kasan_save_alloc_info+0x1e/0x30
[ 151.808609] __kasan_slab_alloc+0x63/0x80
[ 151.809263] kmem_cache_alloc+0x1ad/0x830
[ 151.809916] dlm_allocate_mhandle+0x17/0x20
[ 151.810590] dlm_midcomms_get_mhandle+0x96/0x260
[ 151.811344] _create_message+0x95/0x180
[ 151.811994] create_message.isra.29.constprop.64+0x57/0xc0
[ 151.812880] send_common+0x129/0x1b0
[ 151.813467] _convert_lock+0x46/0x150
[ 151.814074] convert_lock+0x7b/0xc0
[ 151.814648] dlm_lock+0x3ac/0x580
[ 151.815199] torture_dlm_lock_sync.isra.3+0xe9/0x150 [dlm_locktorture]
[ 151.816258] torture_ex_iter+0xc3/0xea [dlm_locktorture]
[ 151.817129] lock_torture+0x177/0x270 [dlm_locktorture]
[ 151.817986] kthread+0x192/0x1d0
[ 151.818518] ret_from_fork+0x1f/0x30
[ 151.819369] Freed by task 1336:
[ 151.819890] kasan_save_stack+0x26/0x50
[ 151.820514] kasan_set_track+0x25/0x30
[ 151.821128] kasan_save_free_info+0x2e/0x50
[ 151.821812] __kasan_slab_free+0x107/0x1a0
[ 151.822483] kmem_cache_free+0x204/0x5e0
[ 151.823152] dlm_free_mhandle+0x18/0x20
[ 151.823781] dlm_mhandle_release+0x2e/0x40
[ 151.824454] rcu_core+0x583/0x1330
[ 151.825047] rcu_core_si+0xe/0x20
[ 151.825594] __do_softirq+0xf4/0x5c2
[ 151.826450] Last potentially related work creation:
[ 151.827238] kasan_save_stack+0x26/0x50
[ 151.827870] __kasan_record_aux_stack+0xa2/0xc0
[ 151.828609] kasan_record_aux_stack_noalloc+0xb/0x20
[ 151.829415] call_rcu+0x4c/0x760
[ 151.829954] dlm_mhandle_delete+0x97/0xb0
[ 151.830718] dlm_process_incoming_buffer+0x2fc/0xb30
[ 151.831524] process_dlm_messages+0x16e/0x470
[ 151.832245] process_one_work+0x505/0xa10
[ 151.832905] worker_thread+0x67/0x650
[ 151.833507] kthread+0x192/0x1d0
[ 151.834046] ret_from_fork+0x1f/0x30
[ 151.834900] The buggy address belongs to the object at
ffff88811a980c30
which belongs to the cache dlm_mhandle of size 88
[ 151.836894] The buggy address is located 48 bytes inside of
88-byte region [
ffff88811a980c30,
ffff88811a980c88)
[ 151.839007] The buggy address belongs to the physical page:
[ 151.839904] page:
0000000076cf5d62 refcount:1 mapcount:0 mapping:
0000000000000000 index:0x0 pfn:0x11a980
[ 151.841378] flags: 0x8000000000000200(slab|zone=2)
[ 151.842141] raw:
8000000000000200 0000000000000000 dead000000000122 ffff8881089b43c0
[ 151.843401] raw:
0000000000000000 0000000000220022 00000001ffffffff 0000000000000000
[ 151.844640] page dumped because: kasan: bad access detected
[ 151.845822] Memory state around the buggy address:
[ 151.846602]
ffff88811a980b00: fb fb fb fb fc fc fc fc fa fb fb fb fb fb fb fb
[ 151.847761]
ffff88811a980b80: fb fb fb fc fc fc fc fa fb fb fb fb fb fb fb fb
[ 151.848921] >
ffff88811a980c00: fb fb fc fc fc fc fa fb fb fb fb fb fb fb fb fb
[ 151.850076] ^
[ 151.851085]
ffff88811a980c80: fb fc fc fc fc fa fb fb fb fb fb fb fb fb fb fb
[ 151.852269]
ffff88811a980d00: fc fc fc fc fa fb fb fb fb fb fb fb fb fb fb fc
[ 151.853428] ==================================================================
[ 151.855618] Disabling lock debugging due to kernel taint
It is accessing a mhandle in dlm_midcomms_commit_mhandle() and the mhandle
was freed by a call_rcu() call in dlm_process_incoming_buffer(),
dlm_mhandle_delete(). It looks like it was freed because an ack of
this message was received. There is a short race between committing the
dlm message to be transmitted and getting an ack back. If the ack is
faster than returning from dlm_midcomms_commit_msg_3_2(), then we run
into a use-after free because we still need to reference the mhandle when
calling srcu_read_unlock().
To avoid that, we don't allow that mhandle to be freed between
dlm_midcomms_commit_msg_3_2() and srcu_read_unlock() by using rcu read
lock. We can do that because mhandle is protected by rcu handling.
Cc: stable@vger.kernel.org
Fixes:
489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Aring [Thu, 27 Oct 2022 20:45:15 +0000 (16:45 -0400)]
fd: dlm: trace send/recv of dlm message and rcom
[ Upstream commit
e01c4b7bd41522ae0299c07e2ee8c721fee02595 ]
This patch adds tracepoints for send and recv cases of dlm messages and
dlm rcom messages. In case of send and dlm message we add the dlm rsb
resource name this dlm messages belongs to. This has the advantage to
follow dlm messages on a per lock basis. In case of recv message the
resource name can be extracted by follow the send message sequence
number.
The dlm message DLM_MSG_PURGE doesn't belong to a lock request and will
not set the resource name in a dlm_message trace. The same for all rcom
messages.
There is additional handling required for this debugging functionality
which is tried to be small as possible. Also the midcomms layer gets
aware of lock resource names, for now this is required to make a
connection between sequence number and lock resource names. It is for
debugging purpose only.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Stable-dep-of:
724b6bab0d75 ("fs: dlm: fix use after free in midcomms commit")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Aring [Thu, 27 Oct 2022 20:45:14 +0000 (16:45 -0400)]
fs: dlm: use packet in dlm_mhandle
[ Upstream commit
5b787667e87a373a2f8f70e6be2b5d99c408462f ]
To allow more than just dereferencing the inner header we directly point
to the inner dlm packet which allows us to dereference the header, rcom
or message structure.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Stable-dep-of:
724b6bab0d75 ("fs: dlm: fix use after free in midcomms commit")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Aring [Thu, 27 Oct 2022 20:45:13 +0000 (16:45 -0400)]
fs: dlm: remove send repeat remove handling
[ Upstream commit
57a5724ef0b332eb6e78250157910a006b01bf6e ]
This patch removes the send repeat remove handling. This handling is
there to repeatingly DLM_MSG_REMOVE messages in cases the dlm stack
thinks it was not received at the first time. In cases of message drops
this functionality is necessary, but since the DLM midcomms layer
guarantees there are no messages drops between cluster nodes this
feature became not strict necessary anymore. Due message
delays/processing it could be that two send_repeat_remove() are sent out
while the other should be still on it's way. We remove the repeat remove
handling because we are sure that the message cannot be dropped due
communication errors.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Stable-dep-of:
724b6bab0d75 ("fs: dlm: fix use after free in midcomms commit")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Aring [Thu, 12 Jan 2023 22:10:31 +0000 (17:10 -0500)]
fs: dlm: start midcomms before scand
[ Upstream commit
aad633dc0cf90093998b1ae0ba9f19b5f1dab644 ]
The scand kthread can send dlm messages out, especially dlm remove
messages to free memory for unused rsb on other nodes. To send out dlm
messages, midcomms must be initialized. This patch moves the midcomms
start before scand is started.
Cc: stable@vger.kernel.org
Fixes:
e7fd41792fc0 ("[DLM] The core of the DLM for GFS2/CLVM")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Aring [Thu, 17 Nov 2022 22:11:46 +0000 (17:11 -0500)]
fs: dlm: add midcomms init/start functions
[ Upstream commit
8b0188b0d60b6f6183b48380bac49fe080c5ded9 ]
This patch introduces leftovers of init, start, stop and exit
functionality. The dlm application layer should always call the midcomms
layer which getting aware of such event and redirect it to the lowcomms
layer. Some functionality which is currently handled inside the start
functionality of midcomms and lowcomms should be handled in the init
functionality as it only need to be initialized once when dlm is loaded.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Stable-dep-of:
aad633dc0cf9 ("fs: dlm: start midcomms before scand")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Aring [Thu, 27 Oct 2022 20:45:26 +0000 (16:45 -0400)]
fs: dlm: fix log of lowcomms vs midcomms
[ Upstream commit
3e54c9e80e68b765d8877023d93f1eea1b9d1c54 ]
This patch will fix a small issue when printing out that
dlm_midcomms_start() failed to start and it was printing out that the
dlm subcomponent lowcomms was failed but lowcomms is behind the midcomms
layer.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Stable-dep-of:
aad633dc0cf9 ("fs: dlm: start midcomms before scand")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Christopherson [Wed, 30 Nov 2022 23:08:58 +0000 (23:08 +0000)]
KVM: VMX: Do _all_ initialization before exposing /dev/kvm to userspace
[ Upstream commit
e32b120071ea114efc0b4ddd439547750b85f618 ]
Call kvm_init() only after _all_ setup is complete, as kvm_init() exposes
/dev/kvm to userspace and thus allows userspace to create VMs (and call
other ioctls). E.g. KVM will encounter a NULL pointer when attempting to
add a vCPU to the per-CPU loaded_vmcss_on_cpu list if userspace is able to
create a VM before vmx_init() configures said list.
BUG: kernel NULL pointer dereference, address:
0000000000000008
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP
CPU: 6 PID: 1143 Comm: stable Not tainted 6.0.0-rc7+ #988
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:vmx_vcpu_load_vmcs+0x68/0x230 [kvm_intel]
<TASK>
vmx_vcpu_load+0x16/0x60 [kvm_intel]
kvm_arch_vcpu_load+0x32/0x1f0 [kvm]
vcpu_load+0x2f/0x40 [kvm]
kvm_arch_vcpu_create+0x231/0x310 [kvm]
kvm_vm_ioctl+0x79f/0xe10 [kvm]
? handle_mm_fault+0xb1/0x220
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x2b/0x50
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f5a6b05743b
</TASK>
Modules linked in: vhost_net vhost vhost_iotlb tap kvm_intel(+) kvm irqbypass
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20221130230934.1014142-15-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Christopherson [Wed, 30 Nov 2022 23:08:57 +0000 (23:08 +0000)]
KVM: x86: Move guts of kvm_arch_init() to standalone helper
[ Upstream commit
4f8396b96a9fc672964842fe7adbe8ddca8a3adf ]
Move the guts of kvm_arch_init() to a new helper, kvm_x86_vendor_init(),
so that VMX can do _all_ arch and vendor initialization before calling
kvm_init(). Calling kvm_init() must be the _very_ last step during init,
as kvm_init() exposes /dev/kvm to userspace, i.e. allows creating VMs.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20221130230934.1014142-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stable-dep-of:
e32b120071ea ("KVM: VMX: Do _all_ initialization before exposing /dev/kvm to userspace")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Christopherson [Wed, 30 Nov 2022 23:08:55 +0000 (23:08 +0000)]
KVM: VMX: Don't bother disabling eVMCS static key on module exit
[ Upstream commit
da66de44b01e9b7fa09731057593850394bf32e4 ]
Don't disable the eVMCS static key on module exit, kvm_intel.ko owns the
key so there can't possibly be users after the kvm_intel.ko is unloaded,
at least not without much bigger issues.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20221130230934.1014142-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stable-dep-of:
e32b120071ea ("KVM: VMX: Do _all_ initialization before exposing /dev/kvm to userspace")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Christopherson [Wed, 30 Nov 2022 23:08:54 +0000 (23:08 +0000)]
KVM: VMX: Reset eVMCS controls in VP assist page during hardware disabling
[ Upstream commit
2916b70fc342719f570640de07251b7f91feebdb ]
Reset the eVMCS controls in the per-CPU VP assist page during hardware
disabling instead of waiting until kvm-intel's module exit. The controls
are activated if and only if KVM creates a VM, i.e. don't need to be
reset if hardware is never enabled.
Doing the reset during hardware disabling will naturally fix a potential
NULL pointer deref bug once KVM disables CPU hotplug while enabling and
disabling hardware (which is necessary to fix a variety of bugs). If the
kernel is running as the root partition, the VP assist page is unmapped
during CPU hot unplug, and so KVM's clearing of the eVMCS controls needs
to occur with CPU hot(un)plug disabled, otherwise KVM could attempt to
write to a CPU's VP assist page after it's unmapped.
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <
20221130230934.1014142-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stable-dep-of:
e32b120071ea ("KVM: VMX: Do _all_ initialization before exposing /dev/kvm to userspace")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fedor Pchelkin [Mon, 6 Mar 2023 21:26:50 +0000 (00:26 +0300)]
nfc: change order inside nfc_se_io error path
commit
7d834b4d1ab66c48e8c0810fdeadaabb80fa2c81 upstream.
cb_context should be freed on the error path in nfc_se_io as stated by
commit
25ff6f8a5a3b ("nfc: fix memory leak of se_io context in
nfc_genl_se_io").
Make the error path in nfc_se_io unwind everything in reverse order, i.e.
free the cb_context after unlocking the device.
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230306212650.230322-1-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lee Jones [Mon, 23 Jan 2023 12:39:12 +0000 (12:39 +0000)]
HID: uhid: Over-ride the default maximum data buffer value with our own
commit
1c5d4221240a233df2440fe75c881465cdf8da07 upstream.
The default maximum data buffer size for this interface is UHID_DATA_MAX
(4k). When data buffers are being processed, ensure this value is used
when ensuring the sanity, rather than a value between the user provided
value and HID_MAX_BUFFER_SIZE (16k).
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lee Jones [Mon, 23 Jan 2023 12:39:11 +0000 (12:39 +0000)]
HID: core: Provide new max_buffer_size attribute to over-ride the default
commit
b1a37ed00d7908a991c1d0f18a8cba3c2aa99bdc upstream.
Presently, when a report is processed, its proposed size, provided by
the user of the API (as Report Size * Report Count) is compared against
the subsystem default HID_MAX_BUFFER_SIZE (16k). However, some
low-level HID drivers allocate a reduced amount of memory to their
buffers (e.g. UHID only allocates UHID_DATA_MAX (4k) buffers), rending
this check inadequate in some cases.
In these circumstances, if the received report ends up being smaller
than the proposed report size, the remainder of the buffer is zeroed.
That is, the space between sizeof(csize) (size of the current report)
and the rsize (size proposed i.e. Report Size * Report Count), which can
be handled up to HID_MAX_BUFFER_SIZE (16k). Meaning that memset()
shoots straight past the end of the buffer boundary and starts zeroing
out in-use values, often resulting in calamity.
This patch introduces a new variable into 'struct hid_ll_driver' where
individual low-level drivers can over-ride the default maximum value of
HID_MAX_BUFFER_SIZE (16k) with something more sympathetic to the
interface.
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhihao Cheng [Wed, 8 Mar 2023 03:26:43 +0000 (11:26 +0800)]
ext4: zero i_disksize when initializing the bootloader inode
commit
f5361da1e60d54ec81346aee8e3d8baf1be0b762 upstream.
If the boot loader inode has never been used before, the
EXT4_IOC_SWAP_BOOT inode will initialize it, including setting the
i_size to 0. However, if the "never before used" boot loader has a
non-zero i_size, then i_disksize will be non-zero, and the
inconsistency between i_size and i_disksize can trigger a kernel
warning:
WARNING: CPU: 0 PID: 2580 at fs/ext4/file.c:319
CPU: 0 PID: 2580 Comm: bb Not tainted 6.3.0-rc1-00004-g703695902cfa
RIP: 0010:ext4_file_write_iter+0xbc7/0xd10
Call Trace:
vfs_write+0x3b1/0x5c0
ksys_write+0x77/0x160
__x64_sys_write+0x22/0x30
do_syscall_64+0x39/0x80
Reproducer:
1. create corrupted image and mount it:
mke2fs -t ext4 /tmp/foo.img 200
debugfs -wR "sif <5> size 25700" /tmp/foo.img
mount -t ext4 /tmp/foo.img /mnt
cd /mnt
echo 123 > file
2. Run the reproducer program:
posix_memalign(&buf, 1024, 1024)
fd = open("file", O_RDWR | O_DIRECT);
ioctl(fd, EXT4_IOC_SWAP_BOOT);
write(fd, buf, 1024);
Fix this by setting i_disksize as well as i_size to zero when
initiaizing the boot loader inode.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217159
Cc: stable@kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20230308032643.641113-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ye Bin [Tue, 7 Mar 2023 01:52:53 +0000 (09:52 +0800)]
ext4: fix WARNING in ext4_update_inline_data
commit
2b96b4a5d9443ca4cad58b0040be455803c05a42 upstream.
Syzbot found the following issue:
EXT4-fs (loop0): mounted filesystem
00000000-0000-0000-0000-
000000000000 without journal. Quota mode: none.
fscrypt: AES-256-CTS-CBC using implementation "cts-cbc-aes-aesni"
fscrypt: AES-256-XTS using implementation "xts-aes-aesni"
------------[ cut here ]------------
WARNING: CPU: 0 PID: 5071 at mm/page_alloc.c:5525 __alloc_pages+0x30a/0x560 mm/page_alloc.c:5525
Modules linked in:
CPU: 1 PID: 5071 Comm: syz-executor263 Not tainted 6.2.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
RIP: 0010:__alloc_pages+0x30a/0x560 mm/page_alloc.c:5525
RSP: 0018:
ffffc90003c2f1c0 EFLAGS:
00010246
RAX:
ffffc90003c2f220 RBX:
0000000000000014 RCX:
0000000000000000
RDX:
0000000000000028 RSI:
0000000000000000 RDI:
ffffc90003c2f248
RBP:
ffffc90003c2f2d8 R08:
dffffc0000000000 R09:
ffffc90003c2f220
R10:
fffff52000785e49 R11:
1ffff92000785e44 R12:
0000000000040d40
R13:
1ffff92000785e40 R14:
dffffc0000000000 R15:
1ffff92000785e3c
FS:
0000555556c0d300(0000) GS:
ffff8880b9800000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f95d5e04138 CR3:
00000000793aa000 CR4:
00000000003506f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
__alloc_pages_node include/linux/gfp.h:237 [inline]
alloc_pages_node include/linux/gfp.h:260 [inline]
__kmalloc_large_node+0x95/0x1e0 mm/slab_common.c:1113
__do_kmalloc_node mm/slab_common.c:956 [inline]
__kmalloc+0xfe/0x190 mm/slab_common.c:981
kmalloc include/linux/slab.h:584 [inline]
kzalloc include/linux/slab.h:720 [inline]
ext4_update_inline_data+0x236/0x6b0 fs/ext4/inline.c:346
ext4_update_inline_dir fs/ext4/inline.c:1115 [inline]
ext4_try_add_inline_entry+0x328/0x990 fs/ext4/inline.c:1307
ext4_add_entry+0x5a4/0xeb0 fs/ext4/namei.c:2385
ext4_add_nondir+0x96/0x260 fs/ext4/namei.c:2772
ext4_create+0x36c/0x560 fs/ext4/namei.c:2817
lookup_open fs/namei.c:3413 [inline]
open_last_lookups fs/namei.c:3481 [inline]
path_openat+0x12ac/0x2dd0 fs/namei.c:3711
do_filp_open+0x264/0x4f0 fs/namei.c:3741
do_sys_openat2+0x124/0x4e0 fs/open.c:1310
do_sys_open fs/open.c:1326 [inline]
__do_sys_openat fs/open.c:1342 [inline]
__se_sys_openat fs/open.c:1337 [inline]
__x64_sys_openat+0x243/0x290 fs/open.c:1337
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Above issue happens as follows:
ext4_iget
ext4_find_inline_data_nolock ->i_inline_off=164 i_inline_size=60
ext4_try_add_inline_entry
__ext4_mark_inode_dirty
ext4_expand_extra_isize_ea ->i_extra_isize=32 s_want_extra_isize=44
ext4_xattr_shift_entries
->after shift i_inline_off is incorrect, actually is change to 176
ext4_try_add_inline_entry
ext4_update_inline_dir
get_max_inline_xattr_value_size
if (EXT4_I(inode)->i_inline_off)
entry = (struct ext4_xattr_entry *)((void *)raw_inode +
EXT4_I(inode)->i_inline_off);
free += EXT4_XATTR_SIZE(le32_to_cpu(entry->e_value_size));
->As entry is incorrect, then 'free' may be negative
ext4_update_inline_data
value = kzalloc(len, GFP_NOFS);
-> len is unsigned int, maybe very large, then trigger warning when
'kzalloc()'
To resolve the above issue we need to update 'i_inline_off' after
'ext4_xattr_shift_entries()'. We do not need to set
EXT4_STATE_MAY_INLINE_DATA flag here, since ext4_mark_inode_dirty()
already sets this flag if needed. Setting EXT4_STATE_MAY_INLINE_DATA
when it is needed may trigger a BUG_ON in ext4_writepages().
Reported-by: syzbot+d30838395804afc2fa6f@syzkaller.appspotmail.com
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307015253.2232062-3-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ye Bin [Tue, 7 Mar 2023 01:52:52 +0000 (09:52 +0800)]
ext4: move where set the MAY_INLINE_DATA flag is set
commit
1dcdce5919115a471bf4921a57f20050c545a236 upstream.
The only caller of ext4_find_inline_data_nolock() that needs setting of
EXT4_STATE_MAY_INLINE_DATA flag is ext4_iget_extra_inode(). In
ext4_write_inline_data_end() we just need to update inode->i_inline_off.
Since we are going to add one more caller that does not need to set
EXT4_STATE_MAY_INLINE_DATA, just move setting of EXT4_STATE_MAY_INLINE_DATA
out to ext4_iget_extra_inode().
Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307015253.2232062-2-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Darrick J. Wong [Thu, 16 Feb 2023 18:55:48 +0000 (10:55 -0800)]
ext4: fix another off-by-one fsmap error on 1k block filesystems
commit
c993799baf9c5861f8df91beb80e1611b12efcbd upstream.
Apparently syzbot figured out that issuing this FSMAP call:
struct fsmap_head cmd = {
.fmh_count = ...;
.fmh_keys = {
{ .fmr_device = /* ext4 dev */, .fmr_physical = 0, },
{ .fmr_device = /* ext4 dev */, .fmr_physical = 0, },
},
...
};
ret = ioctl(fd, FS_IOC_GETFSMAP, &cmd);
Produces this crash if the underlying filesystem is a 1k-block ext4
filesystem:
kernel BUG at fs/ext4/ext4.h:3331!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 3 PID: 3227965 Comm: xfs_io Tainted: G W O 6.2.0-rc8-achx
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:ext4_mb_load_buddy_gfp+0x47c/0x570 [ext4]
RSP: 0018:
ffffc90007c03998 EFLAGS:
00010246
RAX:
ffff888004978000 RBX:
ffffc90007c03a20 RCX:
ffff888041618000
RDX:
0000000000000000 RSI:
00000000000005a4 RDI:
ffffffffa0c99b11
RBP:
ffff888012330000 R08:
ffffffffa0c2b7d0 R09:
0000000000000400
R10:
ffffc90007c03950 R11:
0000000000000000 R12:
0000000000000001
R13:
00000000ffffffff R14:
0000000000000c40 R15:
ffff88802678c398
FS:
00007fdf2020c880(0000) GS:
ffff88807e100000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007ffd318a5fe8 CR3:
000000007f80f001 CR4:
00000000001706e0
Call Trace:
<TASK>
ext4_mballoc_query_range+0x4b/0x210 [ext4
dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
ext4_getfsmap_datadev+0x713/0x890 [ext4
dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
ext4_getfsmap+0x2b7/0x330 [ext4
dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
ext4_ioc_getfsmap+0x153/0x2b0 [ext4
dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
__ext4_ioctl+0x2a7/0x17e0 [ext4
dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
__x64_sys_ioctl+0x82/0xa0
do_syscall_64+0x2b/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fdf20558aff
RSP: 002b:
00007ffd318a9e30 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
RAX:
ffffffffffffffda RBX:
00000000000200c0 RCX:
00007fdf20558aff
RDX:
00007fdf1feb2010 RSI:
00000000c0c0583b RDI:
0000000000000003
RBP:
00005625c0634be0 R08:
00005625c0634c40 R09:
0000000000000001
R10:
0000000000000000 R11:
0000000000000246 R12:
00007fdf1feb2010
R13:
00005625be70d994 R14:
0000000000000800 R15:
0000000000000000
For GETFSMAP calls, the caller selects a physical block device by
writing its block number into fsmap_head.fmh_keys[01].fmr_device.
To query mappings for a subrange of the device, the starting byte of the
range is written to fsmap_head.fmh_keys[0].fmr_physical and the last
byte of the range goes in fsmap_head.fmh_keys[1].fmr_physical.
IOWs, to query what mappings overlap with bytes 3-14 of /dev/sda, you'd
set the inputs as follows:
fmh_keys[0] = { .fmr_device = major(8, 0), .fmr_physical = 3},
fmh_keys[1] = { .fmr_device = major(8, 0), .fmr_physical = 14},
Which would return you whatever is mapped in the 12 bytes starting at
physical offset 3.
The crash is due to insufficient range validation of keys[1] in
ext4_getfsmap_datadev. On 1k-block filesystems, block 0 is not part of
the filesystem, which means that s_first_data_block is nonzero.
ext4_get_group_no_and_offset subtracts this quantity from the blocknr
argument before cracking it into a group number and a block number
within a group. IOWs, block group 0 spans blocks 1-8192 (1-based)
instead of 0-8191 (0-based) like what happens with larger blocksizes.
The net result of this encoding is that blocknr < s_first_data_block is
not a valid input to this function. The end_fsb variable is set from
the keys that are copied from userspace, which means that in the above
example, its value is zero. That leads to an underflow here:
blocknr = blocknr - le32_to_cpu(es->s_first_data_block);
The division then operates on -1:
offset = do_div(blocknr, EXT4_BLOCKS_PER_GROUP(sb)) >>
EXT4_SB(sb)->s_cluster_bits;
Leaving an impossibly large group number (2^32-1) in blocknr.
ext4_getfsmap_check_keys checked that keys[0].fmr_physical and
keys[1].fmr_physical are in increasing order, but
ext4_getfsmap_datadev adjusts keys[0].fmr_physical to be at least
s_first_data_block. This implies that we have to check it again after
the adjustment, which is the piece that I forgot.
Reported-by: syzbot+6be2b977c89f79b6b153@syzkaller.appspotmail.com
Fixes:
4a4956249dac ("ext4: fix off-by-one fsmap error on 1k block filesystems")
Link: https://syzkaller.appspot.com/bug?id=79d5768e9bfe362911ac1a5057a36fc6b5c30002
Cc: stable@vger.kernel.org
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/Y+58NPTH7VNGgzdd@magnolia
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Whitney [Fri, 10 Feb 2023 17:32:44 +0000 (12:32 -0500)]
ext4: fix RENAME_WHITEOUT handling for inline directories
commit
c9f62c8b2dbf7240536c0cc9a4529397bb8bf38e upstream.
A significant number of xfstests can cause ext4 to log one or more
warning messages when they are run on a test file system where the
inline_data feature has been enabled. An example:
"EXT4-fs warning (device vdc): ext4_dirblock_csum_set:425: inode
#16385: comm fsstress: No space for directory leaf checksum. Please
run e2fsck -D."
The xfstests include: ext4/057, 058, and 307; generic/013, 051, 068,
070, 076, 078, 083, 232, 269, 270, 390, 461, 475, 476, 482, 579, 585,
589, 626, 631, and 650.
In this situation, the warning message indicates a bug in the code that
performs the RENAME_WHITEOUT operation on a directory entry that has
been stored inline. It doesn't detect that the directory is stored
inline, and incorrectly attempts to compute a dirent block checksum on
the whiteout inode when creating it. This attempt fails as a result
of the integrity checking in get_dirent_tail (usually due to a failure
to match the EXT4_FT_DIR_CSUM magic cookie), and the warning message
is then emitted.
Fix this by simply collecting the inlined data state at the time the
search for the source directory entry is performed. Existing code
handles the rest, and this is sufficient to eliminate all spurious
warning messages produced by the tests above. Go one step further
and do the same in the code that resets the source directory entry in
the event of failure. The inlined state should be present in the
"old" struct, but given the possibility of a race there's no harm
in taking a conservative approach and getting that information again
since the directory entry is being reread anyway.
Fixes:
b7ff91fd030d ("ext4: find old entry again if failed to rename whiteout")
Cc: stable@kernel.org
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230210173244.679890-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Fri, 3 Feb 2023 00:55:03 +0000 (16:55 -0800)]
ext4: fix cgroup writeback accounting with fs-layer encryption
commit
ffec85d53d0f39ee4680a2cf0795255e000e1feb upstream.
When writing a page from an encrypted file that is using
filesystem-layer encryption (not inline encryption), ext4 encrypts the
pagecache page into a bounce page, then writes the bounce page.
It also passes the bounce page to wbc_account_cgroup_owner(). That's
incorrect, because the bounce page is a newly allocated temporary page
that doesn't have the memory cgroup of the original pagecache page.
This makes wbc_account_cgroup_owner() not account the I/O to the owner
of the pagecache page as it should.
Fix this by always passing the pagecache page to
wbc_account_cgroup_owner().
Fixes:
001e4a8775f6 ("ext4: implement cgroup writeback support")
Cc: stable@vger.kernel.org
Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203005503.141557-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Mon, 6 Mar 2023 15:35:12 +0000 (16:35 +0100)]
staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss()
commit
d17789edd6a8270c38459e592ee536a84c6202db upstream.
To last 2 parameters to cfg80211_get_bss() should be of
the enum ieee80211_bss_type resp. enum ieee80211_privacy types,
which WLAN_CAPABILITY_ESS very much is not.
Fix both cfg80211_get_bss() calls in ioctl_cfg80211.c to pass
the right parameters.
Note that the second call was already somewhat fixed by commenting
out WLAN_CAPABILITY_ESS and passing in 0 instead. This was still
not entirely correct though since that would limit returned
BSS-es to ESS type BSS-es with privacy on.
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230306153512.162104-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Mon, 6 Mar 2023 15:35:11 +0000 (16:35 +0100)]
staging: rtl8723bs: Fix key-store index handling
commit
05cbcc415c9b8c8bc4f9a09f8e03610a89042f03 upstream.
There are 2 issues with the key-store index handling
1. The non WEP key stores can store keys with indexes 0 - BIP_MAX_KEYID,
this means that they should be an array with BIP_MAX_KEYID + 1
entries. But some of the arrays where just BIP_MAX_KEYID entries
big. While one other array was hardcoded to a size of 6 entries,
instead of using the BIP_MAX_KEYID define.
2. The rtw_cfg80211_set_encryption() and wpa_set_encryption() functions
index check where checking that the passed in key-index would fit
inside both the WEP key store (which only has 4 entries) as well as
in the non WEP key stores. This breaks any attempts to set non WEP
keys with index 4 or 5.
Issue 2. specifically breaks wifi connection with some access points
which advertise PMF support. Without this fix connecting to these
access points fails with the following wpa_supplicant messages:
nl80211: kernel reports: key addition failed
wlan0: WPA: Failed to configure IGTK to the driver
wlan0: RSN: Failed to configure IGTK
wlan0: CTRL-EVENT-DISCONNECTED bssid=... reason=1 locally_generated=1
Fix 1. by using the right size for the key-stores. After this 2. can
safely be fixed by checking the right max-index value depending on the
used algorithm, fixing wifi not working with some PMF capable APs.
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230306153512.162104-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Harry Wentland [Fri, 13 Jan 2023 16:24:09 +0000 (11:24 -0500)]
drm/connector: print max_requested_bpc in state debugfs
commit
7d386975f6a495902e679a3a250a7456d7e54765 upstream.
This is useful to understand the bpc defaults and
support of a driver.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Reviewed-By: Joshua Ashton <joshua@froggi.es>
Link: https://patchwork.freedesktop.org/patch/msgid/20230113162428.33874-3-harry.wentland@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Harry Wentland [Fri, 13 Jan 2023 16:24:08 +0000 (11:24 -0500)]
drm/display: Don't block HDR_OUTPUT_METADATA on unknown EOTF
commit
e5eef23e267c72521d81f23f7f82d1f523d4a253 upstream.
The EDID of an HDR display defines EOTFs that are supported
by the display and can be set in the HDR metadata infoframe.
Userspace is expected to read the EDID and set an appropriate
HDR_OUTPUT_METADATA.
In drm_parse_hdr_metadata_block the kernel reads the supported
EOTFs from the EDID and stores them in the
drm_connector->hdr_sink_metadata. While doing so it also
filters the EOTFs to the EOTFs the kernel knows about.
When an HDR_OUTPUT_METADATA is set it then checks to
make sure the EOTF is a supported EOTF. In cases where
the kernel doesn't know about a new EOTF this check will
fail, even if the EDID advertises support.
Since it is expected that userspace reads the EDID to understand
what the display supports it doesn't make sense for DRM to block
an HDR_OUTPUT_METADATA if it contains an EOTF the kernel doesn't
understand.
This comes with the added benefit of future-proofing metadata
support. If the spec defines a new EOTF there is no need to
update DRM and an compositor can immediately make use of it.
Bug: https://gitlab.freedesktop.org/wayland/weston/-/issues/609
v2: Distinguish EOTFs defind in kernel and ones defined
in EDID in the commit description (Pekka)
v3: Rebase; drm_hdmi_infoframe_set_hdr_metadata moved
to drm_hdmi_helper.c
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-By: Joshua Ashton <joshua@froggi.es>
Link: https://patchwork.freedesktop.org/patch/msgid/20230113162428.33874-2-harry.wentland@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Tue, 7 Mar 2023 13:59:13 +0000 (08:59 -0500)]
drm/amdgpu: fix error checking in amdgpu_read_mm_registers for nv
commit
b42fee5e0b44344cfe4c38e61341ee250362c83f upstream.
Properly skip non-existent registers as well.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2442
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Mon, 6 Mar 2023 15:35:34 +0000 (10:35 -0500)]
drm/amdgpu: fix error checking in amdgpu_read_mm_registers for soc21
commit
2915e43a033a778816fa4bc621f033576796521e upstream.
Properly skip non-existent registers as well.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2442
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Mon, 6 Mar 2023 15:34:20 +0000 (10:34 -0500)]
drm/amdgpu: fix error checking in amdgpu_read_mm_registers for soc15
commit
0dcdf8498eae2727bb33cef3576991dc841d4343 upstream.
Properly skip non-existent registers as well.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2442
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Cooper [Tue, 7 Mar 2023 17:46:43 +0000 (17:46 +0000)]
x86/CPU/AMD: Disable XSAVES on AMD family 0x17
commit
b0563468eeac88ebc70559d52a0b66efc37e4e9d upstream.
AMD Erratum 1386 is summarised as:
XSAVES Instruction May Fail to Save XMM Registers to the Provided
State Save Area
This piece of accidental chronomancy causes the %xmm registers to
occasionally reset back to an older value.
Ignore the XSAVES feature on all AMD Zen1/2 hardware. The XSAVEC
instruction (which works fine) is equivalent on affected parts.
[ bp: Typos, move it into the F17h-specific function. ]
Reported-by: Tavis Ormandy <taviso@gmail.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20230307174643.1240184-1-andrew.cooper3@citrix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Palmer Dabbelt [Thu, 23 Feb 2023 22:46:05 +0000 (14:46 -0800)]
RISC-V: Stop emitting attributes
commit
e18048da9bc3f87acef4eb67a11b4fc55fe15424 upstream.
The RISC-V ELF attributes don't contain any useful information. New
toolchains ignore them, but they frequently trip up various older/mixed
toolchains. So just turn them off.
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230223224605.6995-1-palmer@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobias Klauser [Wed, 8 Mar 2023 10:51:26 +0000 (11:51 +0100)]
fork: allow CLONE_NEWTIME in clone3 flags
commit
a402f1e35313fc7ce2ca60f543c4402c2c7c3544 upstream.
Currently, calling clone3() with CLONE_NEWTIME in clone_args->flags
fails with -EINVAL. This is because CLONE_NEWTIME intersects with
CSIGNAL. However, CSIGNAL was deprecated when clone3 was introduced in
commit
7f192e3cd316 ("fork: add clone3"), allowing re-use of that part
of clone flags.
Fix this by explicitly allowing CLONE_NEWTIME in clone3_args_valid. This
is also in line with the respective check in check_unshare_flags which
allow CLONE_NEWTIME for unshare().
Fixes:
769071ac9f20 ("ns: Introduce Time Namespace")
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namhyung Kim [Thu, 23 Feb 2023 07:01:55 +0000 (23:01 -0800)]
perf inject: Fix --buildid-all not to eat up MMAP2
commit
ce9f1c05d2edfa6cdf2c1a510495d333e11810a8 upstream.
When MMAP2 has the PERF_RECORD_MISC_MMAP_BUILD_ID flag, it means the
record already has the build-id info. So it marks the DSO as hit, to
skip if the same DSO is not processed if it happens to miss the build-id
later.
But it missed to copy the MMAP2 record itself so it'd fail to symbolize
samples for those regions.
For example, the following generates 249 MMAP2 events.
$ perf record --buildid-mmap -o- true | perf report --stat -i- | grep MMAP2
MMAP2 events: 249 (86.8%)
Adding perf inject should not change the number of events like this
$ perf record --buildid-mmap -o- true | perf inject -b | \
> perf report --stat -i- | grep MMAP2
MMAP2 events: 249 (86.5%)
But when --buildid-all is used, it eats most of the MMAP2 events.
$ perf record --buildid-mmap -o- true | perf inject -b --buildid-all | \
> perf report --stat -i- | grep MMAP2
MMAP2 events: 1 ( 2.5%)
With this patch, it shows the original number now.
$ perf record --buildid-mmap -o- true | perf inject -b --buildid-all | \
> perf report --stat -i- | grep MMAP2
MMAP2 events: 249 (86.5%)
Committer testing:
Before:
$ perf record --buildid-mmap -o- perf stat --null sleep 1 2> /dev/null | perf inject -b | perf report --stat -i- | grep MMAP2
MMAP2 events: 58 (36.2%)
$ perf record --buildid-mmap -o- perf stat --null sleep 1 2> /dev/null | perf report --stat -i- | grep MMAP2
MMAP2 events: 58 (36.2%)
$ perf record --buildid-mmap -o- perf stat --null sleep 1 2> /dev/null | perf inject -b --buildid-all | perf report --stat -i- | grep MMAP2
MMAP2 events: 2 ( 1.9%)
$
After:
$ perf record --buildid-mmap -o- perf stat --null sleep 1 2> /dev/null | perf inject -b | perf report --stat -i- | grep MMAP2
MMAP2 events: 58 (29.3%)
$ perf record --buildid-mmap -o- perf stat --null sleep 1 2> /dev/null | perf report --stat -i- | grep MMAP2
MMAP2 events: 58 (34.3%)
$ perf record --buildid-mmap -o- perf stat --null sleep 1 2> /dev/null | perf inject -b --buildid-all | perf report --stat -i- | grep MMAP2
MMAP2 events: 58 (38.4%)
$
Fixes:
f7fc0d1c915a74ff ("perf inject: Do not inject BUILD_ID record if MMAP2 has it")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230223070155.54251-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gao Xiang [Sun, 5 Mar 2023 13:44:55 +0000 (21:44 +0800)]
erofs: fix wrong kunmap when using LZMA on HIGHMEM platforms
commit
8f121dfb15f7b4ab345992ce96003eb63fd608f4 upstream.
As the call trace shown, the root cause is kunmap incorrect pages:
BUG: kernel NULL pointer dereference, address:
00000000
CPU: 1 PID: 40 Comm: kworker/u5:0 Not tainted 6.2.0-rc5 #4
Workqueue: erofs_worker z_erofs_decompressqueue_work
EIP: z_erofs_lzma_decompress+0x34b/0x8ac
z_erofs_decompress+0x12/0x14
z_erofs_decompress_queue+0x7e7/0xb1c
z_erofs_decompressqueue_work+0x32/0x60
process_one_work+0x24b/0x4d8
? process_one_work+0x1a4/0x4d8
worker_thread+0x14c/0x3fc
kthread+0xe6/0x10c
? rescuer_thread+0x358/0x358
? kthread_complete_and_exit+0x18/0x18
ret_from_fork+0x1c/0x28
---[ end trace
0000000000000000 ]---
The bug is trivial and should be fixed now. It has no impact on
!HIGHMEM platforms.
Fixes:
622ceaddb764 ("erofs: lzma compression support")
Cc: <stable@vger.kernel.org> # 5.16+
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230305134455.88236-1-hsiangkao@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jens Axboe [Wed, 8 Mar 2023 16:26:13 +0000 (09:26 -0700)]
io_uring/uring_cmd: ensure that device supports IOPOLL
commit
03b3d6be73e81ddb7c2930d942cdd17f4cfd5ba5 upstream.
It's possible for a file type to support uring commands, but not
pollable ones. Hence before issuing one of those, we should check
that it is supported and error out upfront if it isn't.
Cc: stable@vger.kernel.org
Fixes:
5756a3a7e713 ("io_uring: add iopoll infrastructure for io_uring_cmd")
Link: https://github.com/axboe/liburing/issues/816
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Thumshirn [Tue, 21 Feb 2023 18:11:24 +0000 (10:11 -0800)]
btrfs: fix percent calculation for bg reclaim message
commit
95cd356ca23c3807b5f3503687161e216b1c520d upstream.
We have a report, that the info message for block-group reclaim is
crossing the 100% used mark.
This is happening as we were truncating the divisor for the division
(the block_group->length) to a 32bit value.
Fix this by using div64_u64() to not truncate the divisor.
In the worst case, it can lead to a div by zero error and should be
possible to trigger on 4 disks RAID0, and each device is large enough:
$ mkfs.btrfs -f /dev/test/scratch[1234] -m raid1 -d raid0
btrfs-progs v6.1
[...]
Filesystem size: 40.00GiB
Block group profiles:
Data: RAID0 4.00GiB <<<
Metadata: RAID1 256.00MiB
System: RAID1 8.00MiB
Reported-by: Forza <forza@tnonline.net>
Link: https://lore.kernel.org/linux-btrfs/e99483.c11a58d.1863591ca52@tnonline.net/
Fixes:
5f93e776c673 ("btrfs: zoned: print unusable percentage when reclaiming block groups")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add Qu's note ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Naohiro Aota [Mon, 13 Feb 2023 05:10:38 +0000 (14:10 +0900)]
btrfs: fix unnecessary increment of read error stat on write error
commit
98e8d36a26c2ed22f78316df7d4bf33e554b9f9f upstream.
Current btrfs_log_dev_io_error() increases the read error count even if the
erroneous IO is a WRITE request. This is because it forget to use "else
if", and all the error WRITE requests counts as READ error as there is (of
course) no REQ_RAHEAD bit set.
Fixes:
c3a62baf21ad ("btrfs: use chained bios when cloning")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Mon, 6 Mar 2023 18:54:50 +0000 (13:54 -0500)]
fs: prevent out-of-bounds array speculation when closing a file descriptor
commit
609d54441493c99f21c1823dfd66fa7f4c512ff4 upstream.
Google-Bug-Id:
114199369
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 13 Mar 2023 09:21:32 +0000 (10:21 +0100)]
Linux 6.1.19
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Philipp Hortmann [Wed, 1 Mar 2023 21:54:41 +0000 (22:54 +0100)]
staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh
commit
fe413a074a93d56f89e322c786aad8639afe76b4 upstream.
Remove call_usermodehelper starting /etc/acpi/events/RadioPower.sh that
is not available. This script is not part of the kernel and it is not
officially available on the www. The result is that this lines are just
dead code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20230301215441.GA14049@matrix-ESPRIMO-P710
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Philipp Hortmann [Tue, 28 Feb 2023 20:28:57 +0000 (21:28 +0100)]
staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script
commit
a98fc23cc2c1e4382a79ff137ca1a93d6a73b451 upstream.
Remove function _rtl92e_dm_check_ac_dc_power calling a script
/etc/acpi/wireless-rtl-ac-dc-power.sh that is not available. This script
is not part of the kernel and it is not available on the www. The result
is that this function is just dead code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20230228202857.GA16442@matrix-ESPRIMO-P710
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hector Martin [Sat, 11 Mar 2023 14:19:14 +0000 (23:19 +0900)]
wifi: cfg80211: Partial revert "wifi: cfg80211: Fix use after free for wext"
commit
79d1ed5ca7db67d48e870c979f0e0f6b0947944a upstream.
This reverts part of commit
015b8cc5e7c4 ("wifi: cfg80211: Fix use after
free for wext")
This commit broke WPA offload by unconditionally clearing the crypto
modes for non-WEP connections. Drop that part of the patch.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reported-by: Ilya <me@0upti.me>
Reported-and-tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Fixes:
015b8cc5e7c4 ("wifi: cfg80211: Fix use after free for wext")
Cc: stable@kernel.org
Link: https://lore.kernel.org/linux-wireless/ZAx0TWRBlGfv7pNl@kroah.com/T/#m11e6e0915ab8fa19ce8bc9695ab288c0fe018edf
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mario Limonciello [Tue, 28 Feb 2023 02:44:39 +0000 (20:44 -0600)]
tpm: disable hwrng for fTPM on some AMD designs
commit
f1324bbc4011ed8aef3f4552210fc429bcd616da upstream.
AMD has issued an advisory indicating that having fTPM enabled in
BIOS can cause "stuttering" in the OS. This issue has been fixed
in newer versions of the fTPM firmware, but it's up to system
designers to decide whether to distribute it.
This issue has existed for a while, but is more prevalent starting
with kernel 6.1 because commit
b006c439d58db ("hwrng: core - start
hwrng kthread also for untrusted sources") started to use the fTPM
for hwrng by default. However, all uses of /dev/hwrng result in
unacceptable stuttering.
So, simply disable registration of the defective hwrng when detecting
these faulty fTPM versions. As this is caused by faulty firmware, it
is plausible that such a problem could also be reproduced by other TPM
interactions, but this hasn't been shown by any user's testing or reports.
It is hypothesized to be triggered more frequently by the use of the RNG
because userspace software will fetch random numbers regularly.
Intentionally continue to register other TPM functionality so that users
that rely upon PCR measurements or any storage of data will still have
access to it. If it's found later that another TPM functionality is
exacerbating this problem a module parameter it can be turned off entirely
and a module parameter can be introduced to allow users who rely upon
fTPM functionality to turn it on even though this problem is present.
Link: https://www.amd.com/en/support/kb/faq/pa-410
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989
Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/
Fixes:
b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources")
Cc: stable@vger.kernel.org
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Tested-by: reach622@mailcuk.com
Tested-by: Bell <1138267643@qq.com>
Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 11 Mar 2023 12:55:44 +0000 (13:55 +0100)]
Linux 6.1.18
Link: https://lore.kernel.org/r/20230310133717.050159289@linuxfoundation.org
Tested-by: Markus Reichelt <lkt+2023@mareichelt.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yang Yingliang [Mon, 13 Feb 2023 07:09:26 +0000 (15:09 +0800)]
usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails
commit
7ebb605d2283fb2647b4fa82030307ce00bee436 upstream.
If kstrtou8() fails, the mutex_unlock() is missed, move kstrtou8()
before mutex_lock() to fix it up.
Fixes:
0525210c9840 ("usb: gadget: uvc: Allow definition of XUs in configfs")
Fixes:
b3c839bd8a07 ("usb: gadget: uvc: Make bSourceID read/write")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230213070926.776447-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Collingbourne [Wed, 15 Feb 2023 05:09:11 +0000 (21:09 -0800)]
arm64: Reset KASAN tag in copy_highpage with HW tags only
commit
e74a68468062d7ebd8ce17069e12ccc64cc6a58c upstream.
During page migration, the copy_highpage function is used to copy the
page data to the target page. If the source page is a userspace page
with MTE tags, the KASAN tag of the target page must have the match-all
tag in order to avoid tag check faults during subsequent accesses to the
page by the kernel. However, the target page may have been allocated in
a number of ways, some of which will use the KASAN allocator and will
therefore end up setting the KASAN tag to a non-match-all tag. Therefore,
update the target page's KASAN tag to match the source page.
We ended up unintentionally fixing this issue as a result of a bad
merge conflict resolution between commit
e059853d14ca ("arm64: mte:
Fix/clarify the PG_mte_tagged semantics") and commit
20794545c146 ("arm64:
kasan: Revert "arm64: mte: reset the page tag in page->flags""), which
preserved a tag reset for PG_mte_tagged pages which was considered to be
unnecessary at the time. Because SW tags KASAN uses separate tag storage,
update the code to only reset the tags when HW tags KASAN is enabled.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/If303d8a709438d3ff5af5fd85706505830f52e0c
Reported-by: "Kuan-Ying Lee (李冠穎)" <Kuan-Ying.Lee@mediatek.com>
Cc: <stable@vger.kernel.org> # 6.1
Fixes:
20794545c146 ("arm64: kasan: Revert "arm64: mte: reset the page tag in page->flags"")
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20230215050911.1433132-1-pcc@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Catalin Marinas [Fri, 4 Nov 2022 01:10:35 +0000 (18:10 -0700)]
arm64: mte: Fix/clarify the PG_mte_tagged semantics
commit
e059853d14ca4ed0f6a190d7109487918a22a976 upstream.
Currently the PG_mte_tagged page flag mostly means the page contains
valid tags and it should be set after the tags have been cleared or
restored. However, in mte_sync_tags() it is set before setting the tags
to avoid, in theory, a race with concurrent mprotect(PROT_MTE) for
shared pages. However, a concurrent mprotect(PROT_MTE) with a copy on
write in another thread can cause the new page to have stale tags.
Similarly, tag reading via ptrace() can read stale tags if the
PG_mte_tagged flag is set before actually clearing/restoring the tags.
Fix the PG_mte_tagged semantics so that it is only set after the tags
have been cleared or restored. This is safe for swap restoring into a
MAP_SHARED or CoW page since the core code takes the page lock. Add two
functions to test and set the PG_mte_tagged flag with acquire and
release semantics. The downside is that concurrent mprotect(PROT_MTE) on
a MAP_SHARED page may cause tag loss. This is already the case for KVM
guests if a VMM changes the page protection while the guest triggers a
user_mem_abort().
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[pcc@google.com: fix build with CONFIG_ARM64_MTE disabled]
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221104011041.290951-3-pcc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pierre Gondois [Wed, 15 Feb 2023 16:10:47 +0000 (17:10 +0100)]
arm64: efi: Make efi_rt_lock a raw_spinlock
commit
0e68b5517d3767562889f1d83fdb828c26adb24f upstream.
Running a rt-kernel base on 6.2.0-rc3-rt1 on an Ampere Altra outputs
the following:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 9, name: kworker/u320:0
preempt_count: 2, expected: 0
RCU nest depth: 0, expected: 0
3 locks held by kworker/u320:0/9:
#0:
ffff3fff8c27d128 ((wq_completion)efi_rts_wq){+.+.}-{0:0}, at: process_one_work (./include/linux/atomic/atomic-long.h:41)
#1:
ffff80000861bdd0 ((work_completion)(&efi_rts_work.work)){+.+.}-{0:0}, at: process_one_work (./include/linux/atomic/atomic-long.h:41)
#2:
ffffdf7e1ed3e460 (efi_rt_lock){+.+.}-{3:3}, at: efi_call_rts (drivers/firmware/efi/runtime-wrappers.c:101)
Preemption disabled at:
efi_virtmap_load (./arch/arm64/include/asm/mmu_context.h:248)
CPU: 0 PID: 9 Comm: kworker/u320:0 Tainted: G W 6.2.0-rc3-rt1
Hardware name: WIWYNN Mt.Jade Server System B81.03001.0005/Mt.Jade Motherboard, BIOS 1.08.
20220218 (SCP: 1.08.
20220218) 2022/02/18
Workqueue: efi_rts_wq efi_call_rts
Call trace:
dump_backtrace (arch/arm64/kernel/stacktrace.c:158)
show_stack (arch/arm64/kernel/stacktrace.c:165)
dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4))
dump_stack (lib/dump_stack.c:114)
__might_resched (kernel/sched/core.c:10134)
rt_spin_lock (kernel/locking/rtmutex.c:1769 (discriminator 4))
efi_call_rts (drivers/firmware/efi/runtime-wrappers.c:101)
[...]
This seems to come from commit
ff7a167961d1 ("arm64: efi: Execute
runtime services from a dedicated stack") which adds a spinlock. This
spinlock is taken through:
efi_call_rts()
\-efi_call_virt()
\-efi_call_virt_pointer()
\-arch_efi_call_virt_setup()
Make 'efi_rt_lock' a raw_spinlock to avoid being preempted.
[ardb: The EFI runtime services are called with a different set of
translation tables, and are permitted to use the SIMD registers.
The context switch code preserves/restores neither, and so EFI
calls must be made with preemption disabled, rather than only
disabling migration.]
Fixes:
ff7a167961d1 ("arm64: efi: Execute runtime services from a dedicated stack")
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jens Axboe [Sat, 25 Feb 2023 19:53:53 +0000 (12:53 -0700)]
io_uring/poll: allow some retries for poll triggering spuriously
commit
c16bda37594f83147b167d381d54c010024efecf upstream.
If we get woken spuriously when polling and fail the operation with
-EAGAIN again, then we generally only allow polling again if data
had been transferred at some point. This is indicated with
REQ_F_PARTIAL_IO. However, if the spurious poll triggers when the socket
was originally empty, then we haven't transferred data yet and we will
fail the poll re-arm. This either punts the socket to io-wq if it's
blocking, or it fails the request with -EAGAIN if not. Neither condition
is desirable, as the former will slow things down, while the latter
will make the application confused.
We want to ensure that a repeated poll trigger doesn't lead to infinite
work making no progress, that's what the REQ_F_PARTIAL_IO check was
for. But it doesn't protect against a loop post the first receive, and
it's unnecessarily strict if we started out with an empty socket.
Add a somewhat random retry count, just to put an upper limit on the
potential number of retries that will be done. This should be high enough
that we won't really hit it in practice, unless something needs to be
aborted anyway.
Cc: stable@vger.kernel.org # v5.10+
Link: https://github.com/axboe/liburing/issues/364
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xinghui Li [Wed, 2 Nov 2022 08:25:03 +0000 (16:25 +0800)]
io_uring: fix two assignments in if conditions
commit
df730ec21f7ba395b1b22e7f93a3a85b1d1b7882 upstream.
Fixes two errors:
"ERROR: do not use assignment in if condition
130: FILE: io_uring/net.c:130:
+ if (!(issue_flags & IO_URING_F_UNLOCKED) &&
ERROR: do not use assignment in if condition
599: FILE: io_uring/poll.c:599:
+ } else if (!(issue_flags & IO_URING_F_UNLOCKED) &&"
reported by checkpatch.pl in net.c and poll.c .
Signed-off-by: Xinghui Li <korantli@tencent.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20221102082503.32236-1-korantwork@gmail.com
[axboe: style tweaks]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ricardo Ribalda [Thu, 5 Jan 2023 14:31:29 +0000 (15:31 +0100)]
media: uvcvideo: Fix race condition with usb_kill_urb
commit
619d9b710cf06f7a00a17120ca92333684ac45a8 upstream.
usb_kill_urb warranties that all the handlers are finished when it
returns, but does not protect against threads that might be handling
asynchronously the urb.
For UVC, the function uvc_ctrl_status_event_async() takes care of
control changes asynchronously.
If the code is executed in the following order:
CPU 0 CPU 1
===== =====
uvc_status_complete()
uvc_status_stop()
uvc_ctrl_status_event_work()
uvc_status_start() -> FAIL
Then uvc_status_start will keep failing and this error will be shown:
<4>[ 5.540139] URB
0000000000000000 submitted while active
drivers/usb/core/urb.c:378 usb_submit_urb+0x4c3/0x528
Let's improve the current situation, by not re-submiting the urb if
we are stopping the status event. Also process the queued work
(if any) during stop.
CPU 0 CPU 1
===== =====
uvc_status_complete()
uvc_status_stop()
uvc_status_start()
uvc_ctrl_status_event_work() -> FAIL
Hopefully, with the usb layer protection this should be enough to cover
all the cases.
Cc: stable@vger.kernel.org
Fixes:
e5225c820c05 ("media: uvcvideo: Send a control event when a Control Change interrupt arrives")
Reviewed-by: Yunke Cao <yunkec@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Imre Deak [Wed, 8 Feb 2023 11:42:57 +0000 (13:42 +0200)]
drm/i915: Fix system suspend without fbdev being initialized
commit
8038510b1fe443ffbc0e356db5f47cbb8678a594 upstream.
If fbdev is not initialized for some reason - in practice on platforms
without display - suspending fbdev should be skipped during system
suspend, fix this up. While at it add an assert that suspending fbdev
only happens with the display present.
This fixes the following:
[ 91.227923] PM: suspend entry (s2idle)
[ 91.254598] Filesystems sync: 0.025 seconds
[ 91.270518] Freezing user space processes
[ 91.272266] Freezing user space processes completed (elapsed 0.001 seconds)
[ 91.272686] OOM killer disabled.
[ 91.272872] Freezing remaining freezable tasks
[ 91.274295] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 91.659622] BUG: kernel NULL pointer dereference, address:
00000000000001c8
[ 91.659981] #PF: supervisor write access in kernel mode
[ 91.660252] #PF: error_code(0x0002) - not-present page
[ 91.660511] PGD 0 P4D 0
[ 91.660647] Oops: 0002 [#1] PREEMPT SMP NOPTI
[ 91.660875] CPU: 4 PID: 917 Comm: bash Not tainted 6.2.0-rc7+ #54
[ 91.661185] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20221117gitfff6d81270b5-9.fc37 unknown
[ 91.661680] RIP: 0010:mutex_lock+0x19/0x30
[ 91.661914] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 53 48 89 fb e8 62 d3 ff ff 31 c0 65 48 8b 14 25 00 15 03 00 <f0> 48 0f b1 13 75 06 5b c3 cc cc cc cc 48 89 df 5b eb b4 0f 1f 40
[ 91.662840] RSP: 0018:
ffffa1e8011ffc08 EFLAGS:
00010246
[ 91.663087] RAX:
0000000000000000 RBX:
00000000000001c8 RCX:
0000000000000000
[ 91.663440] RDX:
ffff8be455eb0000 RSI:
0000000000000001 RDI:
00000000000001c8
[ 91.663802] RBP:
ffff8be459440000 R08:
ffff8be459441f08 R09:
ffffffff8e1432c0
[ 91.664167] R10:
0000000000000000 R11:
0000000000000000 R12:
0000000000000001
[ 91.664532] R13:
00000000000001c8 R14:
0000000000000000 R15:
ffff8be442f4fb20
[ 91.664905] FS:
00007f28ffc16740(0000) GS:
ffff8be4bb900000(0000) knlGS:
0000000000000000
[ 91.665334] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 91.665626] CR2:
00000000000001c8 CR3:
0000000114926006 CR4:
0000000000770ee0
[ 91.665988] PKRU:
55555554
[ 91.666131] Call Trace:
[ 91.666265] <TASK>
[ 91.666381] intel_fbdev_set_suspend+0x97/0x1b0 [i915]
[ 91.666738] i915_drm_suspend+0xb9/0x100 [i915]
[ 91.667029] pci_pm_suspend+0x78/0x170
[ 91.667234] ? __pfx_pci_pm_suspend+0x10/0x10
[ 91.667461] dpm_run_callback+0x47/0x150
[ 91.667673] __device_suspend+0x10a/0x4e0
[ 91.667880] dpm_suspend+0x134/0x270
[ 91.668069] dpm_suspend_start+0x79/0x80
[ 91.668272] suspend_devices_and_enter+0x11b/0x890
[ 91.668526] pm_suspend.cold+0x270/0x2fc
[ 91.668737] state_store+0x46/0x90
[ 91.668916] kernfs_fop_write_iter+0x11b/0x200
[ 91.669153] vfs_write+0x1e1/0x3a0
[ 91.669336] ksys_write+0x53/0xd0
[ 91.669510] do_syscall_64+0x58/0xc0
[ 91.669699] ? syscall_exit_to_user_mode_prepare+0x18e/0x1c0
[ 91.669980] ? syscall_exit_to_user_mode_prepare+0x18e/0x1c0
[ 91.670278] ? syscall_exit_to_user_mode+0x17/0x40
[ 91.670524] ? do_syscall_64+0x67/0xc0
[ 91.670717] ? __irq_exit_rcu+0x3d/0x140
[ 91.670931] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 91.671202] RIP: 0033:0x7f28ffd14284
v2: CC stable. (Jani)
Fixes:
f8cc091e0530 ("drm/i915/fbdev: suspend HPD before fbdev unregistration")
References: https://gitlab.freedesktop.org/drm/intel/-/issues/8015
Reported-and-tested-by: iczero <iczero@hellomouse.net>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: iczero <iczero@hellomouse.net>
Cc: <stable@vger.kernel.org> # v6.1+
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208114300.3123934-2-imre.deak@intel.com
(cherry picked from commit
9542d708409a41449e99c9a464deb5e062c4bee2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Imre Deak [Mon, 6 Feb 2023 11:48:53 +0000 (13:48 +0200)]
drm/i915/dp_mst: Add the MST topology state for modesetted CRTCs
commit
326b1e792ff08b4d8ecb9605aec98e4e5feef56e upstream.
Add the MST topology for a CRTC to the atomic state if the driver
needs to force a modeset on the CRTC after the encoder compute config
functions are called.
Later the MST encoder's disable hook also adds the state, but that isn't
guaranteed to work (since in that hook getting the state may fail, which
can't be handled there). This should fix that, while a later patch fixes
the use of the MST state in the disable hook.
v2: Add missing forward struct declartions, caught by hdrtest.
v3: Factor out intel_dp_mst_add_topology_state_for_connector() used
later in the patchset.
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org # 6.1
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> # v2
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230206114856.2665066-1-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Imre Deak [Wed, 14 Dec 2022 18:42:58 +0000 (20:42 +0200)]
drm/display/dp_mst: Fix payload addition on a disconnected sink
commit
33f960e23c29d113fe3193e0bdc19ac4f3776f20 upstream.
If an MST stream is enabled on a disconnected sink, the payload for the
stream is not created and the MST manager's payload count/next start VC
slot is not updated. Since the payload's start VC slot may still contain
a valid value (!= -1) the subsequent disabling of such a stream could
cause an incorrect decrease of the payload count/next start VC slot in
drm_dp_remove_payload() and hence later payload additions will fail.
Fix the above by marking the payload as invalid in the above case, so
that it's skipped during payload removal. While at it add a debug print
for this case.
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214184258.2869417-3-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Imre Deak [Wed, 14 Dec 2022 18:42:57 +0000 (20:42 +0200)]
drm/display/dp_mst: Fix down message handling after a packet reception error
commit
1241aedb6b5c7a5a8ad73e5eb3a41cfe18a3e00e upstream.
After an error during receiving a packet for a multi-packet DP MST
sideband message, the state tracking which packets have been received
already is not reset. This prevents the reception of subsequent down
messages (due to the pending message not yet completed with an
end-of-message-transfer packet).
Fix the above by resetting the reception state after a packet error.
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214184258.2869417-2-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Imre Deak [Wed, 14 Dec 2022 18:42:56 +0000 (20:42 +0200)]
drm/display/dp_mst: Fix down/up message handling after sink disconnect
commit
1d082618bbf3b6755b8cc68c0a8122af2842d593 upstream.
If the sink gets disconnected during receiving a multi-packet DP MST AUX
down-reply/up-request sideband message, the state keeping track of which
packets have been received already is not reset. This results in a failed
sanity check for the subsequent message packet received after a sink is
reconnected (due to the pending message not yet completed with an
end-of-message-transfer packet), indicated by the
"sideband msg set header failed"
error.
Fix the above by resetting the up/down message reception state after a
disconnect event.
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214184258.2869417-1-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Imre Deak [Mon, 6 Feb 2023 11:48:55 +0000 (13:48 +0200)]
drm/display/dp_mst: Add drm_atomic_get_old_mst_topology_state()
commit
9ffdb67af0ee625ae127711845532f670cc6a4e7 upstream.
Add a function to get the old MST topology state, required by a
follow-up i915 patch.
While at it clarify the code comment of
drm_atomic_get_new_mst_topology_state() and add _new prefix
to the new state pointer to remind about its difference from the old
state.
v2: Use old_/new_ prefixes for the state pointers. (Ville)
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org # 6.1
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230206114856.2665066-3-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhu Lingshan [Fri, 25 Nov 2022 14:57:22 +0000 (22:57 +0800)]
vDPA/ifcvf: allocate the adapter in dev_add()
commit
93139037b582134deb1ed894bbc4bc1d34ff35e7 upstream.
The adapter is the container of the vdpa_device,
this commits allocate the adapter in dev_add()
rather than in probe(). So that the vdpa_device()
could be re-created when the userspace creates
the vdpa device, and free-ed in dev_del()
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Cc: stable@vger.kernel.org
Message-Id: <
20221125145724.1129962-11-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhu Lingshan [Fri, 25 Nov 2022 14:57:21 +0000 (22:57 +0800)]
vDPA/ifcvf: manage ifcvf_hw in the mgmt_dev
commit
6a3b2f179b49f2c6452ecc37b4778a43848b454c upstream.
This commit allocates the hw structure in the
management device structure. So the hardware
can be initialized once the management device
is allocated in probe.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Cc: stable@vger.kernel.org
Message-Id: <
20221125145724.1129962-10-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhu Lingshan [Fri, 25 Nov 2022 14:57:20 +0000 (22:57 +0800)]
vDPA/ifcvf: ifcvf_request_irq works on ifcvf_hw
commit
7cfd36b7e8be6bdaeb5af0f9729871b732a7a3c8 upstream.
All ifcvf_request_irq's callees are refactored
to work on ifcvf_hw, so it should be decoupled
from the adapter as well
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Cc: stable@vger.kernel.org
Message-Id: <
20221125145724.1129962-9-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhu Lingshan [Fri, 25 Nov 2022 14:57:19 +0000 (22:57 +0800)]
vDPA/ifcvf: decouple config/dev IRQ requester and vectors allocator from the adapter
commit
a70d833e696e538a0feff5e539086c74a90ddf90 upstream.
This commit decouples the config irq requester, the device
shared irq requester and the MSI vectors allocator from
the adapter. So they can be safely invoked since probe
before the adapter is allocated.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Cc: stable@vger.kernel.org
Message-Id: <
20221125145724.1129962-8-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhu Lingshan [Fri, 25 Nov 2022 14:57:18 +0000 (22:57 +0800)]
vDPA/ifcvf: decouple vq irq requester from the adapter
commit
f9a9ffb2e4dbde81090416fc51662441c2a7b73b upstream.
This commit decouples the vq irq requester from the adapter,
so that these functions can be invoked since probe.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Cc: stable@vger.kernel.org
Message-Id: <
20221125145724.1129962-7-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / platform / kernel / linux-starfive.git / log