Jin Yao [Fri, 22 Dec 2017 10:57:35 +0000 (18:57 +0800)]
perf tools: Return all events as auto-completions after comma
It's a follow up for one previous patch "perf tool: Improve bash command
line auto-complete for multiple events with comma."
It fixes an issue that no events are displayed when <TAB> is directly
typed after comma.
With this patch, now the result is:
root@skl:/tmp# perf stat -e cpu-cycles,<TAB>
Display all 2389 possibilities? (y or n)
alarmtimer:alarmtimer_cancel
alarmtimer:alarmtimer_fired
alarmtimer:alarmtimer_start
alarmtimer:alarmtimer_suspend
alignment-faults
arith.divider_active
BAClear_Cost
baclears.any
block:block_bio_backmerge
block:block_bio_bounce
block:block_bio_complete
block:block_bio_frontmerge
block:block_bio_queue
block:block_bio_remap
block:block_dirty_buffer
block:block_getrq
block:block_plug
block:block_rq_complete
block:block_rq_insert
block:block_rq_issue
block:block_rq_remap
block:block_rq_requeue
block:block_sleeprq
--More--
One remaining issue is that the auto-completions doesn't work well
for the event with ':'. For example, clk:clk_enable.
Because ':' is set as WORDBREAK by default in bash. Need more work
for this case.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1513940255-16528-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jin Yao [Thu, 21 Dec 2017 09:26:10 +0000 (17:26 +0800)]
perf tool: Improve bash command line auto-complete for multiple events with comma
perf has perf-completion.sh to define command line auto-completion in
bash/zsh.
For record/stat -e it works for single events, but isn't working when
specifying multiple events with comma.
It would be very useful if it could be fixed to make it easier by
supporting multiple events, comma separated.
With this patch, the result can be like this:
1. Support the events returned from 'perf list --raw-dump'
root@skl:/tmp# perf stat -e cpu/cache<TAB>
cpu/cache-misses/ cpu/cache-references/
root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/branch-<TAB>
cpu/branch-instructions/ cpu/branch-misses/
root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/branch-i<TAB>
root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/branch-instructions/
2. Support the events listed in /sys/bus/event_source/devices/cpu/events
root@skl:/tmp# perf stat -e cycle<TAB>
cycle_activity.cycles_l1d_miss cycle_activity.stalls_l3_miss
cycle_activity.cycles_l2_miss cycle_activity.stalls_mem_any
cycle_activity.cycles_l3_miss cycle_activity.stalls_total
cycle_activity.cycles_mem_any cycles-ct
cycle_activity.stalls_l1d_miss cycles-t
cycle_activity.stalls_l2_miss
root@skl:/tmp# perf stat -e cycles-<TAB>
cycles-ct cycles-t
root@skl:/tmp# perf stat -e cycles-t,cpu/c<TAB>
cpu/cache-misses/ cpu/cpu-cycles/ cpu/cycles-t/
cpu/cache-references/ cpu/cycles-ct/
root@skl:/tmp# perf stat -e cycles-t,cpu/cache-<TAB>
cpu/cache-misses/ cpu/cache-references/
root@skl:/tmp# perf stat -e cycles-t,cpu/cache-misses/
3. Support the uppercase event which is with prefix "cpu/"
root@skl:/tmp# perf stat -e cpu/c<TAB>
cpu/cache-misses/ cpu/cpu-cycles/ cpu/cycles-t/
cpu/cache-references/ cpu/cycles-ct/
root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/C<TAB>
cpu/CACHE-MISSES/ cpu/CPU-CYCLES/ cpu/CYCLES-T/
cpu/CACHE-REFERENCES/ cpu/CYCLES-CT/
root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/CACHE-REFERENCES/
Note that:
a) This patch only supports bash.
b) It doesn't support the cases like {},{} or {...,...}.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1513848370-8098-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kim Phillips [Thu, 14 Dec 2017 23:52:42 +0000 (17:52 -0600)]
perf probe arm64: Fix symbol fixup issues due to ELF type
On an arm64 machine running a CONFIG_RANDOMIZE_BASE=y kernel, perf
kernel symbol resolution fails. Debugging saw symsrc_init calling the
default elf__needs_adjust_symbols() where checks for an ET_DYN (3)
ehdr.e_type failed when they should have succeeded.
Fix by adopting powerpc version of the weak elf__needs_adjust_symbols()
function, as done in commit
d2332098331f ("perf probe ppc: Fix symbol
fixup issues due to ELF type").
Prior to this patch, perf test 1 would fail:
$ sudo oldperf test -v 1 |& head
1: vmlinux symtab matches kallsyms :
test child forked, pid 33374
Looking at the vmlinux_path (8 entries long)
Using /usr/lib/debug/boot/vmlinux for symbols
ERR : 0xfffe0000100f1000: do_undefinstr not on kallsyms
ERR : 0xfffe0000100f1320: do_sysinstr not on kallsyms
ERR : 0xfffe0000100f13b0: do_debug_exception not on kallsyms
ERR : 0xfffe0000100f1498: do_mem_abort not on kallsyms
ERR : 0xfffe0000100f1580: do_sp_pc_abort not on kallsyms
...
After applying this patch, perf test 1 now succeeds:
$ sudo ./newperf test -v 1 |& head
1: vmlinux symtab matches kallsyms :
test child forked, pid 33378
Looking at the vmlinux_path (8 entries long)
Using /usr/lib/debug/boot/vmlinux for symbols
WARN: 0xffff000008081000: diff name v: do_undefinstr k: __exception_text_start
WARN: 0xffff0000080819e8: diff name v: __irqentry_text_end k: __softirqentry_text_start
WARN: 0xffff000008081d08: diff name v: __entry_text_start k: __softirqentry_text_end
WARN: 0xffff00000809db5c: diff name v: flush_icache_range k: __flush_cache_user_range
WARN: 0xffff000008101908: diff name v: sys_ni_syscall k: sys_vm86old
...
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20171214175242.e30450f17f93ad675d968fa3@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mengting Zhang [Wed, 13 Dec 2017 07:01:53 +0000 (15:01 +0800)]
perf evsel: Enable ignore_missing_thread for pid option
While monitoring a multithread process with pid option, perf sometimes
may return sys_perf_event_open failure with 3(No such process) if any of
the process's threads die before we open the event. However, we want
perf continue monitoring the remaining threads and do not exit with
error.
Here, the patch enables perf_evsel::ignore_missing_thread for -p option
to ignore complete failure if any of threads die before we open the event.
But it may still return sys_perf_event_open failure with 22(Invalid) if we
monitors several event groups.
sys_perf_event_open: pid 28960 cpu 40 group_fd 118202 flags 0x8
sys_perf_event_open: pid 28961 cpu 40 group_fd 118203 flags 0x8
WARNING: Ignored open failure for pid 28962
sys_perf_event_open: pid 28962 cpu 40 group_fd [118203] flags 0x8
sys_perf_event_open failed, error -22
That is because when we ignore a missing thread, we change the thread_idx
without dealing with its fds, FD(evsel, cpu, thread). Then get_group_fd()
may return a wrong group_fd for the next thread and sys_perf_event_open()
return with 22.
sys_perf_event_open(){
...
if (group_fd != -1)
perf_fget_light()//to get corresponding group_leader by group_fd
...
if (group_leader)
if (group_leader->ctx->task != ctx->task)//should on the same task
goto err_context
...
}
This patch also fixes this bug by introducing perf_evsel__remove_fd() and
update_fds to allow removing fds for the missing thread.
Changes since v1:
- Change group_fd__remove() into a more genetic way without changing code logic
- Remove redundant condition
Changes since v2:
- Use a proper function name and add some comment.
- Multiline comment style fixes.
Committer testing:
Before this patch the recently added 'perf stat --per-thread' for system
wide counting would race while enumerating all threads using /proc:
[root@jouet ~]# perf stat --per-thread
failed to parse CPUs map: No such file or directory
Usage: perf stat [<options>] [<command>]
-C, --cpu <cpu> list of cpus to monitor in system-wide
-a, --all-cpus system-wide collection from all CPUs
[root@jouet ~]# perf stat --per-thread
failed to parse CPUs map: No such file or directory
Usage: perf stat [<options>] [<command>]
-C, --cpu <cpu> list of cpus to monitor in system-wide
-a, --all-cpus system-wide collection from all CPUs
[root@jouet ~]#
When, say, the kernel was being built, so lots of shortlived threads,
after this patch this doesn't happen.
Signed-off-by: Mengting Zhang <zhangmengting@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Cheng Jian <cj.chengjian@huawei.com>
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1513148513-6974-1-git-send-email-zhangmengting@huawei.com
[ Remove one use 'evlist' alias variable ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Hendrik Brueckner [Wed, 13 Dec 2017 20:46:54 +0000 (17:46 -0300)]
perf s390: Always build with -fPIC
On s390, object files must be compiled with position-indepedent code in
order to be incrementally linked or linked to shared libraries.
Therefore, add -fPIC to the CFLAGS for s390 to ensure each object file
is built properly.
Reported-by: Jonathan Hermann <jonathan.hermann@de.ibm.com>
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: linux s390 list <linux-s390@vger.kernel.org>
Link: https://lkml.kernel.org/r/20171207080951.GC4889@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 13 Dec 2017 20:43:40 +0000 (17:43 -0300)]
Revert "perf s390: Always build with -fPIC"
This one made x86 always build with -fPIC, when the intention was for
s390 to be built that way, due to a rebase mistake.
Reported-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
This reverts commit
1dc4ddf112a408e607a073d951b962b6c6e2bd6c.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Michael Petlan [Tue, 12 Dec 2017 16:22:03 +0000 (11:22 -0500)]
perf test shell: Fix check open filename arg using 'perf trace'
Commit
f231af789b11 ("perf test shell: Fix check open filename arg using
'perf trace' on s390x") added an exception for s390x to use openat()
instead of open() in the test that intercepts a open syscall to look for
the filename argument as obtained by the vfs_getname 'perf probe' it
puts in place at the getname_flags kernel function.
Its not just s390x that uses openat() instead of open(), so use 'perf
list' to look for the syscall:sys_enter_open(at)? present in the system
being tested instead of checking if the system is s390x.
In fact Namhyung pointed out that glibc 2.26 changed this behaviour, as
described in https://lwn.net/Articles/738694/, so systems where glibc is
>= 2.26 will need this patch for this test to work, which already took
place in some distros for architectures such as s390x, while Fedora 26
x86_64 is at glibc 2.25, i.e. still uses open().
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: https://lkml.kernel.org/r/ab23fe42-1080-a46b-503e-744e097f414f@linux.vnet.ibm.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference:
1275675985.
12835754.
1513095723265.JavaMail.zimbra@redhat.com
Link: https://lkml.kernel.org/n/tip-j2wbz9av1rw3thr3t0g4dtuk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Wed, 29 Nov 2017 18:43:46 +0000 (19:43 +0100)]
perf evsel: Fix swap for samples with raw data
When we detect a different endianity we swap event before processing.
It's tricky for samples because we have no idea what's inside. We treat
it as an array of u64s, swap them and later on we swap back parts which
are different.
We mangle this way also the tracepoint raw data, which ends up in report
showing wrong data:
1.95% comm=Q^B pid=29285 prio=
16777216 target_cpu=000
1.67% comm=l^B pid=0 prio=
16777216 target_cpu=000
Luckily the traceevent library handles the endianity by itself (thank
you Steven!), so we can pass the RAW data directly in the other
endianity.
2.51% comm=beah-rhts-task pid=1175 prio=120 target_cpu=002
2.23% comm=kworker/0:0 pid=11566 prio=120 target_cpu=000
The fix is basically to swap back the raw data if different endianity is
detected.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20171129184346.3656-1-jolsa@kernel.org
[ Add util/memswap.c to python-ext-sources to link missing mem_bswap_64() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Tue, 12 Dec 2017 15:05:12 +0000 (00:05 +0900)]
perf probe: Support escaped character in parser
Support the special characters escaped by '\' in parser. This allows
user to specify versions directly like below.
=====
# ./perf probe -x /lib64/libc-2.25.so malloc_get_state\\@GLIBC_2.2.5
Added new event:
probe_libc:malloc_get_state (on malloc_get_state@GLIBC_2.2.5 in /usr/lib64/libc-2.25.so)
You can now use it in all perf tools, such as:
perf record -e probe_libc:malloc_get_state -aR sleep 1
=====
Or, you can use separators in source filename, e.g.
=====
# ./perf probe -x /opt/test/a.out foo+bar.c:3
Semantic error :There is non-digit character in offset.
Error: Command Parse Error.
=====
Usually "+" in source file cause parser error, but
=====
# ./perf probe -x /opt/test/a.out foo\\+bar.c:4
Added new event:
probe_a:main (on @foo+bar.c:4 in /opt/test/a.out)
You can now use it in all perf tools, such as:
perf record -e probe_a:main -aR sleep 1
=====
escaped "\+" allows you to specify that.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: bhargavb <bhargavaramudu@gmail.com>
Cc: linux-rt-users@vger.kernel.org
Link: http://lkml.kernel.org/r/151309111236.18107.5634753157435343410.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Fri, 8 Dec 2017 16:28:41 +0000 (01:28 +0900)]
perf string: Add {strdup,strpbrk}_esc()
To support the special characters escaped by '\' in 'perf probe' event parser.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: bhargavb <bhargavaramudu@gmail.com>
Cc: linux-rt-users@vger.kernel.org
Link: http://lkml.kernel.org/r/151275052163.24652.18205979384585484358.stgit@devbox
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Fri, 8 Dec 2017 16:28:12 +0000 (01:28 +0900)]
perf probe: Find versioned symbols from map
Commit
d80406453ad4 ("perf symbols: Allow user probes on versioned
symbols") allows user to find default versioned symbols (with "@@") in
map. However, it did not enable normal versioned symbol (with "@") for
perf-probe. E.g.
=====
# ./perf probe -x /lib64/libc-2.25.so malloc_get_state
Failed to find symbol malloc_get_state in /usr/lib64/libc-2.25.so
Error: Failed to add events.
=====
This solves above issue by improving perf-probe symbol search function,
as below.
=====
# ./perf probe -x /lib64/libc-2.25.so malloc_get_state
Added new event:
probe_libc:malloc_get_state (on malloc_get_state in /usr/lib64/libc-2.25.so)
You can now use it in all perf tools, such as:
perf record -e probe_libc:malloc_get_state -aR sleep 1
# ./perf probe -l
probe_libc:malloc_get_state (on malloc_get_state@GLIBC_2.2.5 in /usr/lib64/libc-2.25.so)
=====
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: bhargavb <bhargavaramudu@gmail.com>
Cc: linux-rt-users@vger.kernel.org
Link: http://lkml.kernel.org/r/151275049269.24652.1639103455496216255.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Fri, 8 Dec 2017 16:27:44 +0000 (01:27 +0900)]
perf probe: Add __return suffix for return events
Add __return suffix for function return events automatically. Without
this, user have to give --force option and will see the number suffix
for each event like "function_1", which is not easy to recognize.
Instead, this adds __return suffix to it automatically. E.g.
=====
# ./perf probe -x /lib64/libc-2.25.so 'malloc*%return'
Added new events:
probe_libc:malloc_printerr__return (on malloc*%return in /usr/lib64/libc-2.25.so)
probe_libc:malloc_consolidate__return (on malloc*%return in /usr/lib64/libc-2.25.so)
probe_libc:malloc_check__return (on malloc*%return in /usr/lib64/libc-2.25.so)
probe_libc:malloc_hook_ini__return (on malloc*%return in /usr/lib64/libc-2.25.so)
probe_libc:malloc__return (on malloc*%return in /usr/lib64/libc-2.25.so)
probe_libc:malloc_trim__return (on malloc*%return in /usr/lib64/libc-2.25.so)
probe_libc:malloc_usable_size__return (on malloc*%return in /usr/lib64/libc-2.25.so)
probe_libc:malloc_stats__return (on malloc*%return in /usr/lib64/libc-2.25.so)
probe_libc:malloc_info__return (on malloc*%return in /usr/lib64/libc-2.25.so)
probe_libc:mallochook__return (on malloc*%return in /usr/lib64/libc-2.25.so)
probe_libc:malloc_get_state__return (on malloc*%return in /usr/lib64/libc-2.25.so)
probe_libc:malloc_set_state__return (on malloc*%return in /usr/lib64/libc-2.25.so)
You can now use it in all perf tools, such as:
perf record -e probe_libc:malloc_set_state__return -aR sleep 1
=====
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: bhargavb <bhargavaramudu@gmail.com>
Cc: linux-rt-users@vger.kernel.org
Link: http://lkml.kernel.org/r/151275046418.24652.6696011972866498489.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Mon, 11 Dec 2017 18:19:25 +0000 (15:19 -0300)]
perf probe: Cut off the version suffix from event name
Cut off the version suffix (e.g. @GLIBC_2.2.5 etc.) from automatic
generated event name. This fixes wildcard event adding like below case;
=====
# perf probe -x /lib64/libc-2.25.so malloc*
Internal error: "malloc_get_state@GLIBC_2" is wrong event name.
Error: Failed to add events.
=====
This failure was caused by a versioned suffix symbol.
With this fix, perf probe automatically cuts the suffix after @ as
below.
=====
# ./perf probe -x /lib64/libc-2.25.so malloc*
Added new events:
probe_libc:malloc_printerr (on malloc* in /usr/lib64/libc-2.25.so)
probe_libc:malloc_consolidate (on malloc* in /usr/lib64/libc-2.25.so)
probe_libc:malloc_check (on malloc* in /usr/lib64/libc-2.25.so)
probe_libc:malloc_hook_ini (on malloc* in /usr/lib64/libc-2.25.so)
probe_libc:malloc (on malloc* in /usr/lib64/libc-2.25.so)
probe_libc:malloc_trim (on malloc* in /usr/lib64/libc-2.25.so)
probe_libc:malloc_usable_size (on malloc* in /usr/lib64/libc-2.25.so)
probe_libc:malloc_stats (on malloc* in /usr/lib64/libc-2.25.so)
probe_libc:malloc_info (on malloc* in /usr/lib64/libc-2.25.so)
probe_libc:mallochook (on malloc* in /usr/lib64/libc-2.25.so)
probe_libc:malloc_get_state (on malloc* in /usr/lib64/libc-2.25.so)
probe_libc:malloc_set_state (on malloc* in /usr/lib64/libc-2.25.so)
You can now use it in all perf tools, such as:
perf record -e probe_libc:malloc_set_state -aR sleep 1
=====
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reported-by: bhargavb <bhargavaramudu@gmail.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: linux-rt-users@vger.kernel.org
Link: http://lkml.kernel.org/r/None
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Fri, 8 Dec 2017 16:26:46 +0000 (01:26 +0900)]
perf probe: Add warning message if there is unexpected event name
This improve the error message so that user can know event-name error
before writing new events to kprobe-events interface.
E.g.
======
#./perf probe -x /lib64/libc-2.25.so malloc_get_state*
Internal error: "malloc_get_state@GLIBC_2" is an invalid event name.
Error: Failed to add events.
======
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: bhargavb <bhargavaramudu@gmail.com>
Cc: linux-rt-users@vger.kernel.org
Link: http://lkml.kernel.org/r/151275040665.24652.5188568529237584489.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 11 Dec 2017 17:47:49 +0000 (14:47 -0300)]
perf env: Adopt perf_env__arch() from the annotate code
And use it in the libunwind case, with both passing a valid perf_env to
extract the arch to be normalized from and passing NULL with the same
semantic as in the annotate code: to get it from uname() uts.machine.
Now the code to generate per arch errno translation tables (int/string)
can use it to decode perf.data files recorded in a different arch than
that where 'perf trace' (or any other analysis tool) runs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-p2epffgash69w38kvj3ntpc9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 11 Dec 2017 15:52:17 +0000 (12:52 -0300)]
perf annotate: Use perf_env when obtaining the arch name
Paving the way to reuse these routines in other areas, like when
generating errno tables.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-rh1qv051vb8gfdcswskrn53h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 11 Dec 2017 15:46:11 +0000 (12:46 -0300)]
perf annotate: Get the cpuid from evsel->evlist->env in symbol__annotate()
To reduce its function signature, since we get this from 'evsel' which
is already one of its arguments.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-070eap7t6uicg9c3w086xy2z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Hendrik Brueckner [Thu, 7 Dec 2017 08:27:59 +0000 (09:27 +0100)]
perf trace: Use generated syscall table on s390 too
This should speed up accessing new system calls introduced with the
kernel rather than waiting for libaudit updates to include them.
It also enables users to specify wildcards, for example, perf trace -e
'open*', just like was already possible on x86.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: linux-s390@vger.kernel.org
LPU-Reference:
1512635281-20733-2-git-send-email-brueckner@linux.vnet.ibm.com
Link: https://lkml.kernel.org/n/tip-htplh3nbrivi7g3cffbh4fsu@git.kernel.org
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Hendrik Brueckner [Thu, 7 Dec 2017 08:27:59 +0000 (09:27 +0100)]
perf s390: Generate system call table from asm/unistd.h
This should speed up accessing new system calls introduced with
the kernel rather than waiting for libaudit updates to include
them.
Committer testing:
$ rm -rf /tmp/build/perf
$ mkdir /tmp/build/perf
$ make srctree=/home/acme/git/perf -C tools/perf/arch/s390 OUTPUT=/tmp/build/perf/ archheaders
make: Entering directory '/home/acme/git/perf/tools/perf/arch/s390'
/bin/sh '/home/acme/git/perf/tools/perf/arch/s390/entry/syscalls//mksyscalltbl' 'cc' /home/acme/git/perf/tools/arch/s390/include/uapi/asm/unistd.h > /tmp/build/perf/arch/s390/include/generated/asm/syscalls_64.c
make: Leaving directory '/home/acme/git/perf/tools/perf/arch/s390'
$ head -5 /tmp/build/perf/arch/s390/include/generated/asm/syscalls_64.c
static const char *syscalltbl_s390_64[] = {
[1] = "exit",
[2] = "fork",
[3] = "read",
[4] = "write",
$ tail -5 /tmp/build/perf/arch/s390/include/generated/asm/syscalls_64.c
[378] = "s390_guarded_storage",
[379] = "statx",
[380] = "s390_sthyi",
};
#define SYSCALLTBL_S390_64_MAX_ID 380
$
Now to plug this into 'perf trace' proper.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: linux-s390@vger.kernel.org
LPU-Reference:
1512635281-20733-2-git-send-email-brueckner@linux.vnet.ibm.com
Link: https://lkml.kernel.org/n/tip-h5km60rdg3rqxvsys85q50l3@git.kernel.org
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Hendrik Brueckner [Thu, 7 Dec 2017 08:27:59 +0000 (09:27 +0100)]
tools include s390: Grab a copy of arch/s390/include/uapi/asm/unistd.h
Will be used for generating the syscall id/string translation table.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: linux-s390@vger.kernel.org
LPU-Reference:
1512635281-20733-2-git-send-email-brueckner@linux.vnet.ibm.com
Link: https://lkml.kernel.org/n/tip-vjfbfvgjrnqnbdluqd7leo98@git.kernel.org
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pravin Shedge [Wed, 6 Dec 2017 17:43:24 +0000 (23:13 +0530)]
perf perf: Remove duplicate includes
These duplicate includes have been found with scripts/checkincludes.pl
but they have been removed manually to avoid removing false positives.
Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1512582204-6493-1-git-send-email-pravin.shedge4linux@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Wed, 6 Dec 2017 17:45:35 +0000 (18:45 +0100)]
perf test: Handle properly readdir DT_UNKNOWN
Some system can return DT_UNKNOWN in readdir's struct dirent::d_type and
we must handle it properly. In this case we can directly check if the
entity we found is directory and skip it.
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171206174535.25380-1-jolsa@kernel.org
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Wed, 6 Dec 2017 17:45:35 +0000 (18:45 +0100)]
perf utils: Move is_directory() to path.h
So that it can be used more widely, like in the next patch, when it will
be used to fix a bug in 'perf test' handling of dirent.d_type ==
DT_UNKNOWN.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171206174535.25380-1-jolsa@kernel.org
[ Split from a larger patch, removed needless includes in path.h ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jin Yao [Tue, 5 Dec 2017 14:03:11 +0000 (22:03 +0800)]
perf stat: Resort '--per-thread' result
There are many threads reported if we enable '--per-thread'
globally.
1. Most of the threads are not counted or counting value 0.
This patch removes these threads.
2. We also resort the threads in display according to the
counting value. It's useful for user to see the hottest
threads easily.
For example, the new results would be:
root@skl:/tmp# perf stat --per-thread
^C
Performance counter stats for 'system wide':
perf-24165 4.302433 cpu-clock (msec) # 0.001 CPUs utilized
vmstat-23127 1.562215 cpu-clock (msec) # 0.000 CPUs utilized
irqbalance-2780 0.827851 cpu-clock (msec) # 0.000 CPUs utilized
sshd-23111 0.278308 cpu-clock (msec) # 0.000 CPUs utilized
thermald-2841 0.230880 cpu-clock (msec) # 0.000 CPUs utilized
sshd-23058 0.207306 cpu-clock (msec) # 0.000 CPUs utilized
kworker/0:2-19991 0.133983 cpu-clock (msec) # 0.000 CPUs utilized
kworker/u16:1-18249 0.125636 cpu-clock (msec) # 0.000 CPUs utilized
rcu_sched-8 0.085533 cpu-clock (msec) # 0.000 CPUs utilized
kworker/u16:2-23146 0.077139 cpu-clock (msec) # 0.000 CPUs utilized
gmain-2700 0.041789 cpu-clock (msec) # 0.000 CPUs utilized
kworker/4:1-15354 0.028370 cpu-clock (msec) # 0.000 CPUs utilized
kworker/6:0-17528 0.023895 cpu-clock (msec) # 0.000 CPUs utilized
kworker/4:1H-1887 0.013209 cpu-clock (msec) # 0.000 CPUs utilized
kworker/5:2-31362 0.011627 cpu-clock (msec) # 0.000 CPUs utilized
watchdog/0-11 0.010892 cpu-clock (msec) # 0.000 CPUs utilized
kworker/3:2-12870 0.010220 cpu-clock (msec) # 0.000 CPUs utilized
ksoftirqd/0-7 0.008869 cpu-clock (msec) # 0.000 CPUs utilized
watchdog/1-14 0.008476 cpu-clock (msec) # 0.000 CPUs utilized
watchdog/7-50 0.002944 cpu-clock (msec) # 0.000 CPUs utilized
watchdog/3-26 0.002893 cpu-clock (msec) # 0.000 CPUs utilized
watchdog/4-32 0.002759 cpu-clock (msec) # 0.000 CPUs utilized
watchdog/2-20 0.002429 cpu-clock (msec) # 0.000 CPUs utilized
watchdog/6-44 0.001491 cpu-clock (msec) # 0.000 CPUs utilized
watchdog/5-38 0.001477 cpu-clock (msec) # 0.000 CPUs utilized
rcu_sched-8 10 context-switches # 0.117 M/sec
kworker/u16:1-18249 7 context-switches # 0.056 M/sec
sshd-23111 4 context-switches # 0.014 M/sec
vmstat-23127 4 context-switches # 0.003 M/sec
perf-24165 4 context-switches # 0.930 K/sec
kworker/0:2-19991 3 context-switches # 0.022 M/sec
kworker/u16:2-23146 3 context-switches # 0.039 M/sec
kworker/4:1-15354 2 context-switches # 0.070 M/sec
kworker/6:0-17528 2 context-switches # 0.084 M/sec
sshd-23058 2 context-switches # 0.010 M/sec
ksoftirqd/0-7 1 context-switches # 0.113 M/sec
watchdog/0-11 1 context-switches # 0.092 M/sec
watchdog/1-14 1 context-switches # 0.118 M/sec
watchdog/2-20 1 context-switches # 0.412 M/sec
watchdog/3-26 1 context-switches # 0.346 M/sec
watchdog/4-32 1 context-switches # 0.362 M/sec
watchdog/5-38 1 context-switches # 0.677 M/sec
watchdog/6-44 1 context-switches # 0.671 M/sec
watchdog/7-50 1 context-switches # 0.340 M/sec
kworker/4:1H-1887 1 context-switches # 0.076 M/sec
thermald-2841 1 context-switches # 0.004 M/sec
gmain-2700 1 context-switches # 0.024 M/sec
irqbalance-2780 1 context-switches # 0.001 M/sec
kworker/3:2-12870 1 context-switches # 0.098 M/sec
kworker/5:2-31362 1 context-switches # 0.086 M/sec
kworker/u16:1-18249 2 cpu-migrations # 0.016 M/sec
kworker/u16:2-23146 2 cpu-migrations # 0.026 M/sec
rcu_sched-8 1 cpu-migrations # 0.012 M/sec
sshd-23058 1 cpu-migrations # 0.005 M/sec
perf-24165 8,833,385 cycles # 2.053 GHz
vmstat-23127 1,702,699 cycles # 1.090 GHz
irqbalance-2780 739,847 cycles # 0.894 GHz
sshd-23111 269,506 cycles # 0.968 GHz
thermald-2841 204,556 cycles # 0.886 GHz
sshd-23058 158,780 cycles # 0.766 GHz
kworker/0:2-19991 112,981 cycles # 0.843 GHz
kworker/u16:1-18249 100,926 cycles # 0.803 GHz
rcu_sched-8 74,024 cycles # 0.865 GHz
kworker/u16:2-23146 55,984 cycles # 0.726 GHz
gmain-2700 34,278 cycles # 0.820 GHz
kworker/4:1-15354 20,665 cycles # 0.728 GHz
kworker/6:0-17528 16,445 cycles # 0.688 GHz
kworker/5:2-31362 9,492 cycles # 0.816 GHz
watchdog/3-26 8,695 cycles # 3.006 GHz
kworker/4:1H-1887 8,238 cycles # 0.624 GHz
watchdog/4-32 7,580 cycles # 2.747 GHz
kworker/3:2-12870 7,306 cycles # 0.715 GHz
watchdog/2-20 7,274 cycles # 2.995 GHz
watchdog/0-11 6,988 cycles # 0.642 GHz
ksoftirqd/0-7 6,376 cycles # 0.719 GHz
watchdog/1-14 5,340 cycles # 0.630 GHz
watchdog/5-38 4,061 cycles # 2.749 GHz
watchdog/6-44 3,976 cycles # 2.667 GHz
watchdog/7-50 3,418 cycles # 1.161 GHz
vmstat-23127 2,511,699 instructions # 1.48 insn per cycle
perf-24165 1,829,908 instructions # 0.21 insn per cycle
irqbalance-2780 1,190,204 instructions # 1.61 insn per cycle
thermald-2841 143,544 instructions # 0.70 insn per cycle
sshd-23111 128,138 instructions # 0.48 insn per cycle
sshd-23058 57,654 instructions # 0.36 insn per cycle
rcu_sched-8 44,063 instructions # 0.60 insn per cycle
kworker/u16:1-18249 42,551 instructions # 0.42 insn per cycle
kworker/0:2-19991 25,873 instructions # 0.23 insn per cycle
kworker/u16:2-23146 21,407 instructions # 0.38 insn per cycle
gmain-2700 13,691 instructions # 0.40 insn per cycle
kworker/4:1-15354 12,964 instructions # 0.63 insn per cycle
kworker/6:0-17528 10,034 instructions # 0.61 insn per cycle
kworker/5:2-31362 5,203 instructions # 0.55 insn per cycle
kworker/3:2-12870 4,866 instructions # 0.67 insn per cycle
kworker/4:1H-1887 3,586 instructions # 0.44 insn per cycle
ksoftirqd/0-7 3,463 instructions # 0.54 insn per cycle
watchdog/0-11 3,135 instructions # 0.45 insn per cycle
watchdog/1-14 3,135 instructions # 0.59 insn per cycle
watchdog/2-20 3,135 instructions # 0.43 insn per cycle
watchdog/3-26 3,135 instructions # 0.36 insn per cycle
watchdog/4-32 3,135 instructions # 0.41 insn per cycle
watchdog/5-38 3,135 instructions # 0.77 insn per cycle
watchdog/6-44 3,135 instructions # 0.79 insn per cycle
watchdog/7-50 3,135 instructions # 0.92 insn per cycle
vmstat-23127 539,181 branches # 345.139 M/sec
perf-24165 375,364 branches # 87.245 M/sec
irqbalance-2780 262,092 branches # 316.593 M/sec
thermald-2841 31,611 branches # 136.915 M/sec
sshd-23111 21,874 branches # 78.596 M/sec
sshd-23058 10,682 branches # 51.528 M/sec
rcu_sched-8 8,693 branches # 101.633 M/sec
kworker/u16:1-18249 7,891 branches # 62.808 M/sec
kworker/0:2-19991 5,761 branches # 42.998 M/sec
kworker/u16:2-23146 4,099 branches # 53.138 M/sec
kworker/4:1-15354 2,755 branches # 97.110 M/sec
gmain-2700 2,638 branches # 63.127 M/sec
kworker/6:0-17528 2,216 branches # 92.739 M/sec
kworker/5:2-31362 1,132 branches # 97.360 M/sec
kworker/3:2-12870 1,081 branches # 105.773 M/sec
kworker/4:1H-1887 725 branches # 54.887 M/sec
ksoftirqd/0-7 707 branches # 79.716 M/sec
watchdog/0-11 652 branches # 59.860 M/sec
watchdog/1-14 652 branches # 76.923 M/sec
watchdog/2-20 652 branches # 268.423 M/sec
watchdog/3-26 652 branches # 225.372 M/sec
watchdog/4-32 652 branches # 236.318 M/sec
watchdog/5-38 652 branches # 441.435 M/sec
watchdog/6-44 652 branches # 437.290 M/sec
watchdog/7-50 652 branches # 221.467 M/sec
vmstat-23127 8,960 branch-misses # 1.66% of all branches
irqbalance-2780 3,047 branch-misses # 1.16% of all branches
perf-24165 2,876 branch-misses # 0.77% of all branches
sshd-23111 1,843 branch-misses # 8.43% of all branches
thermald-2841 1,444 branch-misses # 4.57% of all branches
sshd-23058 1,379 branch-misses # 12.91% of all branches
kworker/u16:1-18249 982 branch-misses # 12.44% of all branches
rcu_sched-8 893 branch-misses # 10.27% of all branches
kworker/u16:2-23146 578 branch-misses # 14.10% of all branches
kworker/0:2-19991 376 branch-misses # 6.53% of all branches
gmain-2700 280 branch-misses # 10.61% of all branches
kworker/6:0-17528 196 branch-misses # 8.84% of all branches
kworker/4:1-15354 187 branch-misses # 6.79% of all branches
kworker/5:2-31362 123 branch-misses # 10.87% of all branches
watchdog/0-11 95 branch-misses # 14.57% of all branches
watchdog/4-32 89 branch-misses # 13.65% of all branches
kworker/3:2-12870 80 branch-misses # 7.40% of all branches
watchdog/3-26 61 branch-misses # 9.36% of all branches
kworker/4:1H-1887 60 branch-misses # 8.28% of all branches
watchdog/2-20 52 branch-misses # 7.98% of all branches
ksoftirqd/0-7 47 branch-misses # 6.65% of all branches
watchdog/1-14 46 branch-misses # 7.06% of all branches
watchdog/7-50 13 branch-misses # 1.99% of all branches
watchdog/5-38 8 branch-misses # 1.23% of all branches
watchdog/6-44 7 branch-misses # 1.07% of all branches
3.
695150786 seconds time elapsed
root@skl:/tmp# perf stat --per-thread -M IPC,CPI
^C
Performance counter stats for 'system wide':
vmstat-23127 2,000,783 inst_retired.any # 1.5 IPC
thermald-2841 1,472,670 inst_retired.any # 1.3 IPC
sshd-23111 977,374 inst_retired.any # 1.2 IPC
perf-24163 483,779 inst_retired.any # 0.2 IPC
gmain-2700 341,213 inst_retired.any # 0.9 IPC
sshd-23058 148,891 inst_retired.any # 0.8 IPC
rtkit-daemon-3288 71,210 inst_retired.any # 0.7 IPC
kworker/u16:1-18249 39,562 inst_retired.any # 0.3 IPC
rcu_sched-8 14,474 inst_retired.any # 0.8 IPC
kworker/0:2-19991 7,659 inst_retired.any # 0.2 IPC
kworker/4:1-15354 6,714 inst_retired.any # 0.8 IPC
rtkit-daemon-3289 4,839 inst_retired.any # 0.3 IPC
kworker/6:0-17528 3,321 inst_retired.any # 0.6 IPC
kworker/5:2-31362 3,215 inst_retired.any # 0.5 IPC
kworker/7:2-23145 3,173 inst_retired.any # 0.7 IPC
kworker/4:1H-1887 1,719 inst_retired.any # 0.3 IPC
watchdog/0-11 1,479 inst_retired.any # 0.3 IPC
watchdog/1-14 1,479 inst_retired.any # 0.3 IPC
watchdog/2-20 1,479 inst_retired.any # 0.4 IPC
watchdog/3-26 1,479 inst_retired.any # 0.4 IPC
watchdog/4-32 1,479 inst_retired.any # 0.3 IPC
watchdog/5-38 1,479 inst_retired.any # 0.3 IPC
watchdog/6-44 1,479 inst_retired.any # 0.7 IPC
watchdog/7-50 1,479 inst_retired.any # 0.7 IPC
kworker/u16:2-23146 1,408 inst_retired.any # 0.5 IPC
perf-24163 2,249,872 cpu_clk_unhalted.thread
vmstat-23127 1,352,455 cpu_clk_unhalted.thread
thermald-2841 1,161,140 cpu_clk_unhalted.thread
sshd-23111 807,827 cpu_clk_unhalted.thread
gmain-2700 375,535 cpu_clk_unhalted.thread
sshd-23058 194,071 cpu_clk_unhalted.thread
kworker/u16:1-18249 114,306 cpu_clk_unhalted.thread
rtkit-daemon-3288 103,547 cpu_clk_unhalted.thread
kworker/0:2-19991 46,550 cpu_clk_unhalted.thread
rcu_sched-8 18,855 cpu_clk_unhalted.thread
rtkit-daemon-3289 17,549 cpu_clk_unhalted.thread
kworker/4:1-15354 8,812 cpu_clk_unhalted.thread
kworker/5:2-31362 6,812 cpu_clk_unhalted.thread
kworker/4:1H-1887 5,270 cpu_clk_unhalted.thread
kworker/6:0-17528 5,111 cpu_clk_unhalted.thread
kworker/7:2-23145 4,667 cpu_clk_unhalted.thread
watchdog/0-11 4,663 cpu_clk_unhalted.thread
watchdog/1-14 4,663 cpu_clk_unhalted.thread
watchdog/4-32 4,626 cpu_clk_unhalted.thread
watchdog/5-38 4,403 cpu_clk_unhalted.thread
watchdog/3-26 3,936 cpu_clk_unhalted.thread
watchdog/2-20 3,850 cpu_clk_unhalted.thread
kworker/u16:2-23146 2,654 cpu_clk_unhalted.thread
watchdog/6-44 2,017 cpu_clk_unhalted.thread
watchdog/7-50 2,017 cpu_clk_unhalted.thread
vmstat-23127 2,000,783 inst_retired.any # 0.7 CPI
thermald-2841 1,472,670 inst_retired.any # 0.8 CPI
sshd-23111 977,374 inst_retired.any # 0.8 CPI
perf-24163 495,037 inst_retired.any # 4.7 CPI
gmain-2700 341,213 inst_retired.any # 1.1 CPI
sshd-23058 148,891 inst_retired.any # 1.3 CPI
rtkit-daemon-3288 71,210 inst_retired.any # 1.5 CPI
kworker/u16:1-18249 39,562 inst_retired.any # 2.9 CPI
rcu_sched-8 14,474 inst_retired.any # 1.3 CPI
kworker/0:2-19991 7,659 inst_retired.any # 6.1 CPI
kworker/4:1-15354 6,714 inst_retired.any # 1.3 CPI
rtkit-daemon-3289 4,839 inst_retired.any # 3.6 CPI
kworker/6:0-17528 3,321 inst_retired.any # 1.5 CPI
kworker/5:2-31362 3,215 inst_retired.any # 2.1 CPI
kworker/7:2-23145 3,173 inst_retired.any # 1.5 CPI
kworker/4:1H-1887 1,719 inst_retired.any # 3.1 CPI
watchdog/0-11 1,479 inst_retired.any # 3.2 CPI
watchdog/1-14 1,479 inst_retired.any # 3.2 CPI
watchdog/2-20 1,479 inst_retired.any # 2.6 CPI
watchdog/3-26 1,479 inst_retired.any # 2.7 CPI
watchdog/4-32 1,479 inst_retired.any # 3.1 CPI
watchdog/5-38 1,479 inst_retired.any # 3.0 CPI
watchdog/6-44 1,479 inst_retired.any # 1.4 CPI
watchdog/7-50 1,479 inst_retired.any # 1.4 CPI
kworker/u16:2-23146 1,408 inst_retired.any # 1.9 CPI
perf-24163 2,302,323 cycles
vmstat-23127 1,352,455 cycles
thermald-2841 1,161,140 cycles
sshd-23111 807,827 cycles
gmain-2700 375,535 cycles
sshd-23058 194,071 cycles
kworker/u16:1-18249 114,306 cycles
rtkit-daemon-3288 103,547 cycles
kworker/0:2-19991 46,550 cycles
rcu_sched-8 18,855 cycles
rtkit-daemon-3289 17,549 cycles
kworker/4:1-15354 8,812 cycles
kworker/5:2-31362 6,812 cycles
kworker/4:1H-1887 5,270 cycles
kworker/6:0-17528 5,111 cycles
kworker/7:2-23145 4,667 cycles
watchdog/0-11 4,663 cycles
watchdog/1-14 4,663 cycles
watchdog/4-32 4,626 cycles
watchdog/5-38 4,403 cycles
watchdog/3-26 3,936 cycles
watchdog/2-20 3,850 cycles
kworker/u16:2-23146 2,654 cycles
watchdog/6-44 2,017 cycles
watchdog/7-50 2,017 cycles
2.
175726600 seconds time elapsed
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1512482591-4646-12-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jin Yao [Tue, 5 Dec 2017 14:03:10 +0000 (22:03 +0800)]
perf stat: Remove --per-thread pid/tid limitation
Currently, if we execute 'perf stat --per-thread' without specifying
pid/tid, perf will return error.
root@skl:/tmp# perf stat --per-thread
The --per-thread option is only available when monitoring via -p -t options.
-p, --pid <pid> stat events on existing process id
-t, --tid <tid> stat events on existing thread id
This patch removes this limitation. If no pid/tid specified, it returns
all threads (get threads from /proc).
Note that it doesn't support cpu_list yet so if it's a cpu_list case,
then skip.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1512482591-4646-11-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jin Yao [Tue, 5 Dec 2017 14:03:09 +0000 (22:03 +0800)]
perf thread_map: Enumerate all threads from /proc
This patch calls thread_map__new_all_cpus() to enumerate all threads
from /proc if per-thread flag is enabled.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1512482591-4646-10-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jin Yao [Tue, 5 Dec 2017 14:03:08 +0000 (22:03 +0800)]
perf stat: Update or print per-thread stats
If the stats pointer in stat_config structure is not null, it will
update the per-thread stats or print the per-thread stats on this
buffer.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1512482591-4646-9-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jin Yao [Tue, 5 Dec 2017 14:03:07 +0000 (22:03 +0800)]
perf stat: Allocate shadow stats buffer for threads
After perf_evlist__create_maps() being executed, we can get all threads
from /proc. And via thread_map__nr(), we can also get the number of
threads.
With the number of threads, the patch allocates a buffer which will
record the shadow stats for these threads.
The buffer pointer is saved in stat_config.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1512482591-4646-8-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jin Yao [Tue, 5 Dec 2017 14:03:06 +0000 (22:03 +0800)]
perf stat: Remove a set of shadow stats static variables
In previous patches, we have reconstructed the code and let it not
access the static variables directly.
This patch removes these static variables.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1512482591-4646-7-git-send-email-yao.jin@linux.intel.com
[ Rename 'stat' variables to 'st' to build on centos:{5,6} and others where it shadows a global declaration ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jin Yao [Tue, 5 Dec 2017 14:03:05 +0000 (22:03 +0800)]
perf stat: Print per-thread shadow stats
The function perf_stat__print_shadow_stats() is called to print the
shadow stats on a set of static variables.
But the static variables are the limitations to support
per-thread shadow stats.
This patch lets the perf_stat__print_shadow_stats() support
to print the shadow stats from a input parameter 'st'.
It will not directly get value from static variable. Instead,
it now uses runtime_stat_avg() and runtime_stat_n() to get and
compute the values.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1512482591-4646-6-git-send-email-yao.jin@linux.intel.com
[ Rename 'stat' variables to 'st' to build on centos:{5,6} and others where it shadows a global declaration ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jin Yao [Tue, 5 Dec 2017 14:03:04 +0000 (22:03 +0800)]
perf stat: Update per-thread shadow stats
The functions perf_stat__update_shadow_stats() is called to update the
shadow stats on a set of static variables.
But the static variables are the limitations to be extended to support
per-thread shadow stats.
This patch lets the perf_stat__update_shadow_stats() support to update
the shadow stats on a input parameter 'st' and uses
update_runtime_stat() to update the stats. It will not directly update
the static variables as before.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1512482591-4646-5-git-send-email-yao.jin@linux.intel.com
[ Rename 'stat' variables to 'st' to build on centos:{5,6} and others where it shadows a global declaration ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jin Yao [Tue, 5 Dec 2017 14:03:03 +0000 (22:03 +0800)]
perf stat: Create the runtime_stat init/exit function
It mainly initializes and releases the rblist which is defined in struct
runtime_stat.
For the original rblist 'runtime_saved_values', it's still kept there
for keeping the patch bisectable.
The rblist 'runtime_saved_values' will be removed in later patch at
switching time.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1512482591-4646-4-git-send-email-yao.jin@linux.intel.com
[ Rename 'stat' variables to 'st' to build on centos:{5,6} and others where it shadows a global declaration ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jin Yao [Tue, 5 Dec 2017 14:03:02 +0000 (22:03 +0800)]
perf stat: Extend rbtree to support per-thread shadow stats
Previously the rbtree was used to link generic metrics.
This patches adds new ctx/type/stat into rbtree keys because we will use
this rbtree to maintain shadow metrics to replace original a couple of
static arrays for supporting per-thread shadow stats.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1512482591-4646-3-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jin Yao [Tue, 5 Dec 2017 14:03:01 +0000 (22:03 +0800)]
perf stat: Define a structure for per-thread shadow stats
Perf has a set of static variables to record the runtime shadow metrics
stats.
While if we want to record the runtime shadow stats for per-thread, it
will be the limitation. This patch creates a structure and the next
patches will use this structure to update the runtime shadow stats for
per-thread.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1512482591-4646-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Mon, 18 Dec 2017 17:13:00 +0000 (18:13 +0100)]
Merge branch 'perf/urgent' into perf/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Mon, 18 Dec 2017 17:10:32 +0000 (18:10 +0100)]
Merge tag 'perf-urgent-for-mingo-4.15-
20171218' of git://git./linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Fix up build in hardened environments, such as fedora 27 (Jiri Olsa)
- Do not include header files from the kernel sources for the s/390 arch,
fixing the detached tarball building (Arnaldo Carvalho de Melo)
- Allow again using asm.h when building for the 'bpf' clang target,
guarding x86 specific bits under ifndef __BPF__ (Arnaldo Carvalho de Melo)
- Generate correct debug information for inlined code when generating
ELF images for JITted java programs (Ben Gainey)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Arnaldo Carvalho de Melo [Mon, 4 Dec 2017 16:08:47 +0000 (13:08 -0300)]
x86/asm: Allow again using asm.h when building for the 'bpf' clang target
Up to
f5caf621ee35 ("x86/asm: Fix inline asm call constraints for Clang")
we were able to use x86 headers to build to the 'bpf' clang target, as
done by the BPF code in tools/perf/.
With that commit, we ended up with following failure for 'perf test LLVM', this
is because "clang ... -target bpf ..." fails since 4.0 does not have bpf inline
asm support and 6.0 does not recognize the register 'esp', fix it by guarding
that part with an #ifndef __BPF__, that is defined by clang when building to
the "bpf" target.
# perf test -v LLVM
37: LLVM search and compile :
37.1: Basic BPF llvm compile :
--- start ---
test child forked, pid 25526
Kernel build dir is set to /lib/modules/4.14.0+/build
set env: KBUILD_DIR=/lib/modules/4.14.0+/build
unset env: KBUILD_OPTS
include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/7/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h
set env: NR_CPUS=4
set env: LINUX_VERSION_CODE=0x40e00
set env: CLANG_EXEC=/usr/local/bin/clang
set env: CLANG_OPTIONS=-xc
set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/7/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h
set env: WORKING_DIR=/lib/modules/4.14.0+/build
set env: CLANG_SOURCE=-
llvm compiling command template: echo '/*
* bpf-script-example.c
* Test basic LLVM building
*/
#ifndef LINUX_VERSION_CODE
# error Need LINUX_VERSION_CODE
# error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig'
#endif
#define BPF_ANY 0
#define BPF_MAP_TYPE_ARRAY 2
#define BPF_FUNC_map_lookup_elem 1
#define BPF_FUNC_map_update_elem 2
static void *(*bpf_map_lookup_elem)(void *map, void *key) =
(void *) BPF_FUNC_map_lookup_elem;
static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) =
(void *) BPF_FUNC_map_update_elem;
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def SEC("maps") flip_table = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = 1,
};
SEC("func=SyS_epoll_wait")
int bpf_func__SyS_epoll_wait(void *ctx)
{
int ind =0;
int *flag = bpf_map_lookup_elem(&flip_table, &ind);
int new_flag;
if (!flag)
return 0;
/* flip flag and store back */
new_flag = !*flag;
bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY);
return new_flag;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o -
test child finished with 0
---- end ----
LLVM search and compile subtest 0: Ok
37.2: kbuild searching :
--- start ---
test child forked, pid 25950
Kernel build dir is set to /lib/modules/4.14.0+/build
set env: KBUILD_DIR=/lib/modules/4.14.0+/build
unset env: KBUILD_OPTS
include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/7/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h
set env: NR_CPUS=4
set env: LINUX_VERSION_CODE=0x40e00
set env: CLANG_EXEC=/usr/local/bin/clang
set env: CLANG_OPTIONS=-xc
set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/7/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h
set env: WORKING_DIR=/lib/modules/4.14.0+/build
set env: CLANG_SOURCE=-
llvm compiling command template: echo '/*
* bpf-script-test-kbuild.c
* Test include from kernel header
*/
#ifndef LINUX_VERSION_CODE
# error Need LINUX_VERSION_CODE
# error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig'
#endif
#define SEC(NAME) __attribute__((section(NAME), used))
#include <uapi/linux/fs.h>
#include <uapi/asm/ptrace.h>
SEC("func=vfs_llseek")
int bpf_func__vfs_llseek(void *ctx)
{
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o -
In file included from <stdin>:12:
In file included from /home/acme/git/linux/arch/x86/include/uapi/asm/ptrace.h:5:
In file included from /home/acme/git/linux/include/linux/compiler.h:242:
In file included from /home/acme/git/linux/arch/x86/include/asm/barrier.h:5:
In file included from /home/acme/git/linux/arch/x86/include/asm/alternative.h:10:
/home/acme/git/linux/arch/x86/include/asm/asm.h:145:50: error: unknown register name 'esp' in asm
register unsigned long current_stack_pointer asm(_ASM_SP);
^
/home/acme/git/linux/arch/x86/include/asm/asm.h:44:18: note: expanded from macro '_ASM_SP'
#define _ASM_SP __ASM_REG(sp)
^
/home/acme/git/linux/arch/x86/include/asm/asm.h:27:32: note: expanded from macro '__ASM_REG'
#define __ASM_REG(reg) __ASM_SEL_RAW(e##reg, r##reg)
^
/home/acme/git/linux/arch/x86/include/asm/asm.h:18:29: note: expanded from macro '__ASM_SEL_RAW'
# define __ASM_SEL_RAW(a,b) __ASM_FORM_RAW(a)
^
/home/acme/git/linux/arch/x86/include/asm/asm.h:11:32: note: expanded from macro '__ASM_FORM_RAW'
# define __ASM_FORM_RAW(x) #x
^
<scratch space>:4:1: note: expanded from here
"esp"
^
1 error generated.
ERROR: unable to compile -
Hint: Check error message shown above.
Hint: You can also pre-compile it into .o using:
clang -target bpf -O2 -c -
with proper -I and -D options.
Failed to compile test case: 'kbuild searching'
test child finished with -1
---- end ----
LLVM search and compile subtest 1: FAILED!
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/r/20171128175948.GL3298@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 28 Nov 2017 14:08:41 +0000 (11:08 -0300)]
tools arch s390: Do not include header files from the kernel sources
Long ago we decided to be verbotten including files in the kernel git
sources from tools/ living source code, to avoid disturbing kernel
development (and perf's and other tools/) when, say, a kernel hacker
adds something, tests everything but tools/ and have tools/ build
broken.
This got broken recently by s/390, fix it by copying
arch/s390/include/uapi/asm/perf_regs.h to tools/arch/s390/include/uapi/asm/,
making this one be used by means of <asm/perf_regs.h> and updating
tools/perf/check_headers.sh to make sure we are notified when the
original changes, so that we can check if anything is needed on the
tooling side.
This would have been caught by the 'tarkpg' test entry in:
$ make -C tools/perf build-test
When run on a s/390 build system or container.
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes:
f704ef44602f ("s390/perf: add support for perf_regs and libdw")
Link: https://lkml.kernel.org/n/tip-n57139ic0v9uffx8wdqi3d8a@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ben Gainey [Thu, 23 Nov 2017 00:25:41 +0000 (18:25 -0600)]
perf jvmti: Generate correct debug information for inlined code
tools/perf/jvmti is broken in so far as it generates incorrect debug
information. Specifically it attributes all debug lines to the original
method being output even in the case that some code is being inlined
from elsewhere. This patch fixes the issue.
To test (from within linux/tools/perf):
export JDIR=/usr/lib/jvm/java-8-openjdk-amd64/
make
cat << __EOF > Test.java
public class Test
{
private StringBuilder b = new StringBuilder();
private void loop(int i, String... args)
{
for (String a : args)
b.append(a);
long hc = b.hashCode() * System.nanoTime();
b = new StringBuilder();
b.append(hc);
System.out.printf("Iteration %d = %d\n", i, hc);
}
public void run(String... args)
{
for (int i = 0; i < 10000; ++i)
{
loop(i, args);
}
}
public static void main(String... args)
{
Test t = new Test();
t.run(args);
}
}
__EOF
$JDIR/bin/javac Test.java
./perf record -F 10000 -g -k mono $JDIR/bin/java -agentpath:`pwd`/libperf-jvmti.so Test
./perf inject --jit -i perf.data -o perf.data.jitted
./perf annotate -i perf.data.jitted --stdio | grep Test\.java: | sort -u
Before this patch, Test.java line numbers get reported that are greater
than the number of lines in the Test.java file. They come from the
source file of the inlined function, e.g. java/lang/String.java:1085.
For further validation one can examine those lines in the JDK source
distribution and confirm that they map to inlined functions called by
Test.java.
After this patch, the filename of the inlined function is output
rather than the incorrect original source filename.
Signed-off-by: Ben Gainey <ben.gainey@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Colin King <colin.king@canonical.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
598b7c6919c7 ("perf jit: add source line info support")
Link: http://lkml.kernel.org/r/20171122182541.d25599a3eb1ada3480d142fa@arm.com
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 4 Dec 2017 15:23:08 +0000 (12:23 -0300)]
perf tools: Fix up build in hardened environments
On Fedora systems the perl and python CFLAGS/LDFLAGS include the
hardened specs from redhat-rpm-config package. We apply them only for
perl/python objects, which makes them not compatible with the rest of
the objects and the build fails with:
/usr/bin/ld: perf-in.o: relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a shared object; recompile with -f
+PIC
/usr/bin/ld: libperf.a(libperf-in.o): relocation R_X86_64_32S against `.text' can not be used when making a shared object; recompile w
+ith -fPIC
/usr/bin/ld: final link failed: Nonrepresentable section on output
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile.perf:507: perf] Error 1
make[1]: *** [Makefile.perf:210: sub-make] Error 2
make: *** [Makefile:69: all] Error 2
Mainly it's caused by perl/python objects being compiled with:
-specs=/usr/lib/rpm/redhat/redhat-hardened-cc1
which prevent the final link impossible, because it will check
for 'proper' objects with following option:
-specs=/usr/lib/rpm/redhat/redhat-hardened-ld
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20171204082437.GC30564@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Wed, 8 Nov 2017 10:27:37 +0000 (11:27 +0100)]
perf tools: Use shell function for perl cflags retrieval
Using the shell function for perl CFLAGS retrieval instead of back
quotes (``). Both execute shell with the command, but the latter is more
explicit and seems to be the preferred way.
Also we don't have any other use of the back quotes in perf Makefiles.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171108102739.30338-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Mon, 18 Dec 2017 05:26:07 +0000 (06:26 +0100)]
Merge tag 'v4.15-rc4' into perf/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Mon, 18 Dec 2017 02:59:59 +0000 (18:59 -0800)]
Linux 4.15-rc4
Kees Cook [Tue, 12 Dec 2017 19:28:38 +0000 (11:28 -0800)]
Revert "exec: avoid RLIMIT_STACK races with prlimit()"
This reverts commit
04e35f4495dd560db30c25efca4eecae8ec8c375.
SELinux runs with secureexec for all non-"noatsecure" domain transitions,
which means lots of processes end up hitting the stack hard-limit change
that was introduced in order to fix a race with prlimit(). That race fix
will need to be redesigned.
Reported-by: Laura Abbott <labbott@redhat.com>
Reported-by: Tomáš Trnka <trnka@scm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 17 Dec 2017 21:57:08 +0000 (13:57 -0800)]
Merge branch 'WIP.x86-pti.base-for-linus' of git://git./linux/kernel/git/tip/tip
Pull Page Table Isolation (PTI) v4.14 backporting base tree from Ingo Molnar:
"This tree contains the v4.14 PTI backport preparatory tree, which
consists of four merges of upstream trees and 7 cherry-picked commits,
which the upcoming PTI work depends on"
NOTE! The resulting tree is exactly the same as the original base tree
(ie the diff between this commit and its immediate first parent is
empty).
The only reason for this merge is literally to have a common point for
the actual PTI changes so that the commits can be shared in both the
4.15 and 4.14 trees.
* 'WIP.x86-pti.base-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/kasan: Don't use vmemmap_populate() to initialize shadow
locking/barriers: Convert users of lockless_dereference() to READ_ONCE()
locking/barriers: Add implicit smp_read_barrier_depends() to READ_ONCE()
bpf: fix build issues on um due to mising bpf_perf_event.h
perf/x86: Enable free running PEBS for REGS_USER/INTR
x86: Make X86_BUG_FXSAVE_LEAK detectable in CPUID on AMD
x86/cpufeature: Add User-Mode Instruction Prevention definitions
Linus Torvalds [Sun, 17 Dec 2017 21:54:31 +0000 (13:54 -0800)]
Merge branch 'WIP.x86-pti.base.prep-for-linus' of git://git./linux/kernel/git/tip/tip
Pull Page Table Isolation (PTI) preparatory tree from Ingo Molnar:
"This does a rename to free up linux/pti.h to be used by the upcoming
page table isolation feature"
* 'WIP.x86-pti.base.prep-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
drivers/misc/intel/pti: Rename the header file to free up the namespace
Linus Torvalds [Sun, 17 Dec 2017 21:48:50 +0000 (13:48 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single bugfix which prevents arbitrary sigev_notify values in
posix-timers"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-timer: Properly check sigevent->sigev_notify
Linus Torvalds [Sun, 17 Dec 2017 21:28:49 +0000 (13:28 -0800)]
Merge tag 'dmaengine-fix-4.15-rc4' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"This time consisting of fixes in a bunch of drivers and the dmatest
module:
- Fix for disable clk on error path in fsl-edma driver
- Disable clk fail fix in jz4740 driver
- Fix long pending bug in dmatest driver for dangling pointer
- Fix potential NULL pointer dereference in at_hdmac driver
- Error handling path in ioat driver"
* tag 'dmaengine-fix-4.15-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: fsl-edma: disable clks on all error paths
dmaengine: jz4740: disable/unprepare clk if probe fails
dmaengine: dmatest: move callback wait queue to thread context
dmaengine: at_hdmac: fix potential NULL pointer dereference in atc_prep_dma_interleaved
dmaengine: ioat: Fix error handling path
Arnd Bergmann [Fri, 10 Nov 2017 14:57:21 +0000 (15:57 +0100)]
cramfs: fix MTD dependency
With CONFIG_MTD=m and CONFIG_CRAMFS=y, we now get a link failure:
fs/cramfs/inode.o: In function `cramfs_mount': inode.c:(.text+0x220): undefined reference to `mount_mtd'
fs/cramfs/inode.o: In function `cramfs_mtd_fill_super':
inode.c:(.text+0x6d8): undefined reference to `mtd_point'
inode.c:(.text+0xae4): undefined reference to `mtd_unpoint'
This adds a more specific Kconfig dependency to avoid the broken
configuration.
Alternatively we could make CRAMFS itself depend on "MTD || !MTD" with a
similar result.
Fixes:
99c18ce580c6 ("cramfs: direct memory access support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 17 Dec 2017 20:18:35 +0000 (12:18 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"The alloc_super() one is a regression in this merge window, lazytime
thing is older..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
VFS: Handle lazytime in do_mount()
alloc_super(): do ->s_umount initialization earlier
Linus Torvalds [Sun, 17 Dec 2017 20:14:33 +0000 (12:14 -0800)]
Merge tag 'ext4_for_stable' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a regression which caused us to fail to interpret symlinks in very
ancient ext3 file system images.
Also fix two xfstests failures, one of which could cause an OOPS, plus
an additional bug fix caught by fuzz testing"
* tag 'ext4_for_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix crash when a directory's i_size is too small
ext4: add missing error check in __ext4_new_inode()
ext4: fix fdatasync(2) after fallocate(2) operation
ext4: support fast symlinks from ext3 file systems
Andrey Ryabinin [Thu, 16 Nov 2017 01:36:35 +0000 (17:36 -0800)]
x86/mm/kasan: Don't use vmemmap_populate() to initialize shadow
[ Note, this is a Git cherry-pick of the following commit:
d17a1d97dc20: ("x86/mm/kasan: don't use vmemmap_populate() to initialize shadow")
... for easier x86 PTI code testing and back-porting. ]
The KASAN shadow is currently mapped using vmemmap_populate() since that
provides a semi-convenient way to map pages into init_top_pgt. However,
since that no longer zeroes the mapped pages, it is not suitable for
KASAN, which requires zeroed shadow memory.
Add kasan_populate_shadow() interface and use it instead of
vmemmap_populate(). Besides, this allows us to take advantage of
gigantic pages and use them to populate the shadow, which should save us
some memory wasted on page tables and reduce TLB pressure.
Link: http://lkml.kernel.org/r/20171103185147.2688-2-pasha.tatashin@oracle.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Bob Picco <bob.picco@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Will Deacon [Tue, 24 Oct 2017 10:22:48 +0000 (11:22 +0100)]
locking/barriers: Convert users of lockless_dereference() to READ_ONCE()
[ Note, this is a Git cherry-pick of the following commit:
506458efaf15 ("locking/barriers: Convert users of lockless_dereference() to READ_ONCE()")
... for easier x86 PTI code testing and back-porting. ]
READ_ONCE() now has an implicit smp_read_barrier_depends() call, so it
can be used instead of lockless_dereference() without any change in
semantics.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1508840570-22169-4-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Will Deacon [Tue, 24 Oct 2017 10:22:47 +0000 (11:22 +0100)]
locking/barriers: Add implicit smp_read_barrier_depends() to READ_ONCE()
[ Note, this is a Git cherry-pick of the following commit:
76ebbe78f739 ("locking/barriers: Add implicit smp_read_barrier_depends() to READ_ONCE()")
... for easier x86 PTI code testing and back-porting. ]
In preparation for the removal of lockless_dereference(), which is the
same as READ_ONCE() on all architectures other than Alpha, add an
implicit smp_read_barrier_depends() to READ_ONCE() so that it can be
used to head dependency chains on all architectures.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1508840570-22169-3-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Daniel Borkmann [Tue, 12 Dec 2017 01:25:31 +0000 (02:25 +0100)]
bpf: fix build issues on um due to mising bpf_perf_event.h
[ Note, this is a Git cherry-pick of the following commit:
a23f06f06dbe ("bpf: fix build issues on um due to mising bpf_perf_event.h")
... for easier x86 PTI code testing and back-porting. ]
Since
c895f6f703ad ("bpf: correct broken uapi for
BPF_PROG_TYPE_PERF_EVENT program type") um (uml) won't build
on i386 or x86_64:
[...]
CC init/main.o
In file included from ../include/linux/perf_event.h:18:0,
from ../include/linux/trace_events.h:10,
from ../include/trace/syscall.h:7,
from ../include/linux/syscalls.h:82,
from ../init/main.c:20:
../include/uapi/linux/bpf_perf_event.h:11:32: fatal error:
asm/bpf_perf_event.h: No such file or directory #include
<asm/bpf_perf_event.h>
[...]
Lets add missing bpf_perf_event.h also to um arch. This seems
to be the only one still missing.
Fixes:
c895f6f703ad ("bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program type")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Richard Weinberger <richard@sigma-star.at>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Richard Weinberger <richard@sigma-star.at>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andi Kleen [Thu, 31 Aug 2017 21:46:30 +0000 (14:46 -0700)]
perf/x86: Enable free running PEBS for REGS_USER/INTR
[ Note, this is a Git cherry-pick of the following commit:
a47ba4d77e12 ("perf/x86: Enable free running PEBS for REGS_USER/INTR")
... for easier x86 PTI code testing and back-porting. ]
Currently free running PEBS is disabled when user or interrupt
registers are requested. Most of the registers are actually
available in the PEBS record and can be supported.
So we just need to check for the supported registers and then
allow it: it is all except for the segment register.
For user registers this only works when the counter is limited
to ring 3 only, so this also needs to be checked.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170831214630.21892-1-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rudolf Marek [Tue, 28 Nov 2017 21:01:06 +0000 (22:01 +0100)]
x86: Make X86_BUG_FXSAVE_LEAK detectable in CPUID on AMD
[ Note, this is a Git cherry-pick of the following commit:
2b67799bdf25 ("x86: Make X86_BUG_FXSAVE_LEAK detectable in CPUID on AMD")
... for easier x86 PTI code testing and back-porting. ]
The latest AMD AMD64 Architecture Programmer's Manual
adds a CPUID feature XSaveErPtr (CPUID_Fn80000008_EBX[2]).
If this feature is set, the FXSAVE, XSAVE, FXSAVEOPT, XSAVEC, XSAVES
/ FXRSTOR, XRSTOR, XRSTORS always save/restore error pointers,
thus making the X86_BUG_FXSAVE_LEAK workaround obsolete on such CPUs.
Signed-Off-By: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Tested-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: https://lkml.kernel.org/r/bdcebe90-62c5-1f05-083c-eba7f08b2540@assembler.cz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ricardo Neri [Mon, 6 Nov 2017 02:27:51 +0000 (18:27 -0800)]
x86/cpufeature: Add User-Mode Instruction Prevention definitions
[ Note, this is a Git cherry-pick of the following commit: (limited to the cpufeatures.h file)
3522c2a6a4f3 ("x86/cpufeature: Add User-Mode Instruction Prevention definitions")
... for easier x86 PTI code testing and back-porting. ]
User-Mode Instruction Prevention is a security feature present in new
Intel processors that, when set, prevents the execution of a subset of
instructions if such instructions are executed in user mode (CPL > 0).
Attempting to execute such instructions causes a general protection
exception.
The subset of instructions comprises:
* SGDT - Store Global Descriptor Table
* SIDT - Store Interrupt Descriptor Table
* SLDT - Store Local Descriptor Table
* SMSW - Store Machine Status Word
* STR - Store Task Register
This feature is also added to the list of disabled-features to allow
a cleaner handling of build-time configuration.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chen Yucong <slaoub@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: ricardo.neri@intel.com
Link: http://lkml.kernel.org/r/1509935277-22138-7-git-send-email-ricardo.neri-calderon@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Fri, 1 Dec 2017 09:34:04 +0000 (10:34 +0100)]
Merge commit 'upstream-x86-virt' into WIP.x86/mm
Merge a minimal set of virt cleanups, for a base for the MM isolation patches.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Sun, 17 Dec 2017 12:09:31 +0000 (13:09 +0100)]
Merge branch 'upstream-acpi-fixes' into WIP.x86/pti.base
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Sun, 17 Dec 2017 12:04:28 +0000 (13:04 +0100)]
Merge branch 'upstream-x86-selftests' into WIP.x86/pti.base
Conflicts:
arch/x86/kernel/cpu/Makefile
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Fri, 1 Dec 2017 09:32:48 +0000 (10:32 +0100)]
Merge commit 'upstream-x86-entry' into WIP.x86/mm
Pull in a minimal set of v4.15 entry code changes, for a base for the MM isolation patches.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Tue, 5 Dec 2017 13:14:47 +0000 (14:14 +0100)]
drivers/misc/intel/pti: Rename the header file to free up the namespace
We'd like to use the 'PTI' acronym for 'Page Table Isolation' - free up the
namespace by renaming the <linux/pti.h> driver header to <linux/intel-pti.h>.
(Also standardize the header guard name while at it.)
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: J Freyensee <james_p_freyensee@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Sat, 16 Dec 2017 21:43:08 +0000 (13:43 -0800)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"More fixes from testing done on the rc kernel, including more SELinux
testing. Looking forward, lockdep found regression today in ipoib
which is still being fixed.
Summary:
- Fix for SELinux on the umad SMI path. Some old hardware does not
fill the PKey properly exposing another bug in the newer SELinux
code.
- Check the input port as we can exceed array bounds from this user
supplied value
- Users are unable to use the hash field support as they want due to
incorrect checks on the field restrictions, correct that so the
feature works as intended
- User triggerable oops in the NETLINK_RDMA handler
- cxgb4 driver fix for a bad interaction with CQ flushing in iser
caused by patches in this merge window, and bad CQ flushing during
normal close.
- Unbalanced memalloc_noio in ipoib in an error path"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/ipoib: Restore MM behavior in case of tx_ring allocation failure
iw_cxgb4: only insert drain cqes if wq is flushed
iw_cxgb4: only clear the ARMED bit if a notification is needed
RDMA/netlink: Fix general protection fault
IB/mlx4: Fix RSS hash fields restrictions
IB/core: Don't enforce PKey security on SMI MADs
IB/core: Bound check alternate path port number
Linus Torvalds [Sat, 16 Dec 2017 21:34:38 +0000 (13:34 -0800)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two bugfixes for the AT24 I2C eeprom driver and some minor corrections
for I2C bus drivers"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: piix4: Fix port number check on release
i2c: stm32: Fix copyrights
i2c-cht-wc: constify platform_device_id
eeprom: at24: change nvmem stride to 1
eeprom: at24: fix I2C device selection for runtime PM
Linus Torvalds [Sat, 16 Dec 2017 21:12:53 +0000 (13:12 -0800)]
Merge tag 'nfs-for-4.15-3' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"This has two stable bugfixes, one to fix a BUG_ON() when
nfs_commit_inode() is called with no outstanding commit requests and
another to fix a race in the SUNRPC receive codepath.
Additionally, there are also fixes for an NFS client deadlock and an
xprtrdma performance regression.
Summary:
Stable bugfixes:
- NFS: Avoid a BUG_ON() in nfs_commit_inode() by not waiting for a
commit in the case that there were no commit requests.
- SUNRPC: Fix a race in the receive code path
Other fixes:
- NFS: Fix a deadlock in nfs client initialization
- xprtrdma: Fix a performance regression for small IOs"
* tag 'nfs-for-4.15-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: Fix a race in the receive code path
nfs: don't wait on commit in nfs_commit_inode() if there were no commit requests
xprtrdma: Spread reply processing over more CPUs
nfs: fix a deadlock in nfs client initialization
Linus Torvalds [Sat, 16 Dec 2017 02:53:22 +0000 (18:53 -0800)]
Revert "mm: replace p??_write with pte_access_permitted in fault + gup paths"
This reverts commits
5c9d2d5c269c,
c7da82b894e9, and
e7fe7b5cae90.
We'll probably need to revisit this, but basically we should not
complicate the get_user_pages_fast() case, and checking the actual page
table protection key bits will require more care anyway, since the
protection keys depend on the exact state of the VM in question.
Particularly when doing a "remote" page lookup (ie in somebody elses VM,
not your own), you need to be much more careful than this was. Dave
Hansen says:
"So, the underlying bug here is that we now a get_user_pages_remote()
and then go ahead and do the p*_access_permitted() checks against the
current PKRU. This was introduced recently with the addition of the
new p??_access_permitted() calls.
We have checks in the VMA path for the "remote" gups and we avoid
consulting PKRU for them. This got missed in the pkeys selftests
because I did a ptrace read, but not a *write*. I also didn't
explicitly test it against something where a COW needed to be done"
It's also not entirely clear that it makes sense to check the protection
key bits at this level at all. But one possible eventual solution is to
make the get_user_pages_fast() case just abort if it sees protection key
bits set, which makes us fall back to the regular get_user_pages() case,
which then has a vma and can do the check there if we want to.
We'll see.
Somewhat related to this all: what we _do_ want to do some day is to
check the PAGE_USER bit - it should obviously always be set for user
pages, but it would be a good check to have back. Because we have no
generic way to test for it, we lost it as part of moving over from the
architecture-specific x86 GUP implementation to the generic one in
commit
e585513b76f7 ("x86/mm/gup: Switch GUP to the generic
get_user_page_fast() implementation").
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 15 Dec 2017 21:08:37 +0000 (13:08 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Clamp timeouts to INT_MAX in conntrack, from Jay Elliot.
2) Fix broken UAPI for BPF_PROG_TYPE_PERF_EVENT, from Hendrik
Brueckner.
3) Fix locking in ieee80211_sta_tear_down_BA_sessions, from Johannes
Berg.
4) Add missing barriers to ptr_ring, from Michael S. Tsirkin.
5) Don't advertise gigabit in sh_eth when not available, from Thomas
Petazzoni.
6) Check network namespace when delivering to netlink taps, from Kevin
Cernekee.
7) Kill a race in raw_sendmsg(), from Mohamed Ghannam.
8) Use correct address in TCP md5 lookups when replying to an incoming
segment, from Christoph Paasch.
9) Add schedule points to BPF map alloc/free, from Eric Dumazet.
10) Don't allow silly mtu values to be used in ipv4/ipv6 multicast, also
from Eric Dumazet.
11) Fix SKB leak in tipc, from Jon Maloy.
12) Disable MAC learning on OVS ports of mlxsw, from Yuval Mintz.
13) SKB leak fix in skB_complete_tx_timestamp(), from Willem de Bruijn.
14) Add some new qmi_wwan device IDs, from Daniele Palmas.
15) Fix static key imbalance in ingress qdisc, from Jiri Pirko.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
net: qcom/emac: Reduce timeout for mdio read/write
net: sched: fix static key imbalance in case of ingress/clsact_init error
net: sched: fix clsact init error path
ip_gre: fix wrong return value of erspan_rcv
net: usb: qmi_wwan: add Telit ME910 PID 0x1101 support
pkt_sched: Remove TC_RED_OFFLOADED from uapi
net: sched: Move to new offload indication in RED
net: sched: Add TCA_HW_OFFLOAD
net: aquantia: Increment driver version
net: aquantia: Fix typo in ethtool statistics names
net: aquantia: Update hw counters on hw init
net: aquantia: Improve link state and statistics check interval callback
net: aquantia: Fill in multicast counter in ndev stats from hardware
net: aquantia: Fill ndev stat couters from hardware
net: aquantia: Extend stat counters to 64bit values
net: aquantia: Fix hardware DMA stream overload on large MRRS
net: aquantia: Fix actual speed capabilities reporting
sock: free skb in skb_complete_tx_timestamp on error
s390/qeth: update takeover IPs after configuration change
s390/qeth: lock IP table while applying takeover changes
...
Linus Torvalds [Fri, 15 Dec 2017 21:03:25 +0000 (13:03 -0800)]
Merge tag 'usb-4.15-rc4' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB fixes for 4.15-rc4.
There is the usual handful gadget/dwc2/dwc3 fixes as always, for
reported issues. But the most important things in here is the core fix
from Alan Stern to resolve a nasty security bug (my first attempt is
reverted, Alan's was much cleaner), as well as a number of usbip fixes
from Shuah Khan to resolve those reported security issues.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: core: prevent malicious bNumInterfaces overflow
Revert "USB: core: only clean up what we allocated"
USB: core: only clean up what we allocated
Revert "usb: gadget: allow to enable legacy drivers without USB_ETH"
usb: gadget: webcam: fix V4L2 Kconfig dependency
usb: dwc2: Fix TxFIFOn sizes and total TxFIFO size issues
usb: dwc3: gadget: Fix PCM1 for ISOC EP with ep->mult less than 3
usb: dwc3: of-simple: set dev_pm_ops
usb: dwc3: of-simple: fix missing clk_disable_unprepare
usb: dwc3: gadget: Wait longer for controller to end command processing
usb: xhci: fix TDS for MTK xHCI1.1
xhci: Don't add a virt_dev to the devs array before it's fully allocated
usbip: fix stub_send_ret_submit() vulnerability to null transfer_buffer
usbip: prevent vhci_hcd driver from leaking a socket pointer address
usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input
usbip: fix stub_rx: get_pipe() to validate endpoint number
tools/usbip: fixes potential (minor) "buffer overflow" (detected on recent gcc with -Werror)
USB: uas and storage: Add US_FL_BROKEN_FUA for another JMicron JMS567 ID
usb: musb: da8xx: fix babble condition handling
Linus Torvalds [Fri, 15 Dec 2017 20:59:48 +0000 (12:59 -0800)]
Merge tag 'staging-4.15-rc4' of git://git./linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are some small staging driver fixes for 4.15-rc4.
One patch for the ccree driver to prevent an unitialized value from
being returned to a caller, and the other fixes a logic error in the
pi433 driver"
* tag 'staging-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: pi433: Fixes issue with bit shift in rf69_get_modulation
staging: ccree: Uninitialized return in ssi_ahash_import()
Linus Torvalds [Fri, 15 Dec 2017 20:56:23 +0000 (12:56 -0800)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio regression fixes from Michael Tsirkin:
"Fixes two issues in the latest kernel"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_mmio: fix devm cleanup
ptr_ring: fix up after recent ptr_ring changes
Linus Torvalds [Fri, 15 Dec 2017 20:53:37 +0000 (12:53 -0800)]
Merge tag 'for-4.15/dm-fixes' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- fix a particularly nasty DM core bug in a 4.15 refcount_t conversion.
- fix various targets to dm_register_target after module __init
resources created; otherwise racing lvm2 commands could result in a
NULL pointer during initialization of associated DM kernel module.
- fix regression in bio-based DM multipath queue_if_no_path handling.
- fix DM bufio's shrinker to reclaim more than one buffer per scan.
* tag 'for-4.15/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm bufio: fix shrinker scans when (nr_to_scan < retain_target)
dm mpath: fix bio-based multipath queue_if_no_path handling
dm: fix various targets to dm_register_target after module __init resources created
dm table: fix regression from improper dm_dev_internal.count refcount_t conversion
Linus Torvalds [Fri, 15 Dec 2017 20:51:42 +0000 (12:51 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The most important one is the bfa fix because it's easy to oops the
kernel with this driver (this includes the commit that corrects the
compiler warning in the original), a regression in the new timespec
conversion in aacraid and a regression in the Fibre Channel ELS
handling patch.
The other three are a theoretical problem with termination in the
vendor/host matching code and a use after free in lpfc.
The additional patches are a fix for an I/O hang in the mq code under
certain circumstances and a rare oops in some debugging code"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: core: Fix a scsi_show_rq() NULL pointer dereference
scsi: MAINTAINERS: change FCoE list to linux-scsi
scsi: libsas: fix length error in sas_smp_handler()
scsi: bfa: fix type conversion warning
scsi: core: run queue if SCSI device queue isn't ready and queue is idle
scsi: scsi_devinfo: cleanly zero-pad devinfo strings
scsi: scsi_devinfo: handle non-terminated strings
scsi: bfa: fix access to bfad_im_port_s
scsi: aacraid: address UBSAN warning regression
scsi: libfc: fix ELS request handling
scsi: lpfc: Use after free in lpfc_rq_buf_free()
Linus Torvalds [Fri, 15 Dec 2017 20:49:54 +0000 (12:49 -0800)]
Merge tag 'mmc-v4.15-rc2' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"A couple of MMC fixes:
- fix use of uninitialized drv_typ variable
- apply NO_CMD23 quirk to some specific SD cards to make them work"
* tag 'mmc-v4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: apply NO_CMD23 quirk to some specific cards
mmc: core: properly init drv_type
Linus Torvalds [Fri, 15 Dec 2017 20:48:27 +0000 (12:48 -0800)]
Merge tag 'ceph-for-4.15-rc4' of git://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"CephFS inode trimming fix from Zheng, marked for stable"
* tag 'ceph-for-4.15-rc4' of git://github.com/ceph/ceph-client:
ceph: drop negative child dentries before try pruning inode's alias
Linus Torvalds [Fri, 15 Dec 2017 20:46:48 +0000 (12:46 -0800)]
Merge branch 'overlayfs-linus' of git://git./linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
- fix incomplete syncing of filesystem
- fix regression in readdir on ovl over 9p
- only follow redirects when needed
- misc fixes and cleanups
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: fix overlay: warning prefix
ovl: Use PTR_ERR_OR_ZERO()
ovl: Sync upper dirty data when syncing overlayfs
ovl: update ctx->pos on impure dir iteration
ovl: Pass ovl_get_nlink() parameters in right order
ovl: don't follow redirects if redirect_dir=off
Hemanth Puranik [Fri, 15 Dec 2017 14:35:58 +0000 (20:05 +0530)]
net: qcom/emac: Reduce timeout for mdio read/write
Currently mdio read/write takes around ~115us as the timeout
between status check is set to 100us.
By reducing the timeout to 1us mdio read/write takes ~15us to
complete. This improves the link up event response.
Signed-off-by: Hemanth Puranik <hpuranik@codeaurora.org>
Acked-by: Timur Tabi <timur@codeaurora.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 15 Dec 2017 20:44:49 +0000 (12:44 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"There are some significant fixes in here for FP state corruption,
hardware access/dirty PTE corruption and an erratum workaround for the
Falkor CPU.
I'm hoping that things finally settle down now, but never say never...
Summary:
- Fix FPSIMD context switch regression introduced in -rc2
- Fix ABI break with SVE CPUID register reporting
- Fix use of uninitialised variable
- Fixes to hardware access/dirty management and sanity checking
- CPU erratum workaround for Falkor CPUs
- Fix reporting of writeable+executable mappings
- Fix signal reporting for RAS errors"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: fpsimd: Fix copying of FP state from signal frame into task struct
arm64/sve: Report SVE to userspace via CPUID only if supported
arm64: fix CONFIG_DEBUG_WX address reporting
arm64: fault: avoid send SIGBUS two times
arm64: hw_breakpoint: Use linux/uaccess.h instead of asm/uaccess.h
arm64: Add software workaround for Falkor erratum 1041
arm64: Define cputype macros for Falkor CPU
arm64: mm: Fix false positives in set_pte_at access/dirty race detection
arm64: mm: Fix pte_mkclean, pte_mkdirty semantics
arm64: Initialise high_memory global variable earlier
Jiri Pirko [Fri, 15 Dec 2017 11:40:13 +0000 (12:40 +0100)]
net: sched: fix static key imbalance in case of ingress/clsact_init error
Move static key increments to the beginning of the init function
so they pair 1:1 with decrements in ingress/clsact_destroy,
which is called in case ingress/clsact_init fails.
Fixes:
6529eaba33f0 ("net: sched: introduce tcf block infractructure")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 15 Dec 2017 11:40:12 +0000 (12:40 +0100)]
net: sched: fix clsact init error path
Since in qdisc_create, the destroy op is called when init fails, we
don't do cleanup in init and leave it up to destroy.
This fixes use-after-free when trying to put already freed block.
Fixes:
6e40cf2d4dee ("net: sched: use extended variants of block_get/put in ingress and clsact qdiscs")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 15 Dec 2017 20:14:33 +0000 (12:14 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- fix the s2ram regression related to confusion around segment
register restoration, plus related cleanups that make the code more
robust
- a guess-unwinder Kconfig dependency fix
- an isoimage build target fix for certain tool chain combinations
- instruction decoder opcode map fixes+updates, and the syncing of
the kernel decoder headers to the objtool headers
- a kmmio tracing fix
- two 5-level paging related fixes
- a topology enumeration fix on certain SMP systems"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Resync objtool's instruction decoder source code copy with the kernel's latest version
x86/decoder: Fix and update the opcodes map
x86/power: Make restore_processor_context() sane
x86/power/32: Move SYSENTER MSR restoration to fix_processor_context()
x86/power/64: Use struct desc_ptr for the IDT in struct saved_context
x86/unwinder/guess: Prevent using CONFIG_UNWINDER_GUESS=y with CONFIG_STACKDEPOT=y
x86/build: Don't verify mtools configuration file for isoimage
x86/mm/kmmio: Fix mmiotrace for page unaligned addresses
x86/boot/compressed/64: Print error if 5-level paging is not supported
x86/boot/compressed/64: Detect and handle 5-level paging at boot-time
x86/smpboot: Do not use smp_num_siblings in __max_logical_packages calculation
Linus Torvalds [Fri, 15 Dec 2017 19:44:59 +0000 (11:44 -0800)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
"Misc fixes:
- Fix a S390 boot hang that was caused by the lock-break logic.
Remove lock-break to begin with, as review suggested it was
unreasonably fragile and our confidence in its continued good
health is lower than our confidence in its removal.
- Remove the lockdep cross-release checking code for now, because of
unresolved false positive warnings. This should make lockdep work
well everywhere again.
- Get rid of the final (and single) ACCESS_ONCE() straggler and
remove the API from v4.15.
- Fix a liblockdep build warning"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/lib/lockdep: Add missing declaration of 'pr_cont()'
checkpatch: Remove ACCESS_ONCE() warning
compiler.h: Remove ACCESS_ONCE()
tools/include: Remove ACCESS_ONCE()
tools/perf: Convert ACCESS_ONCE() to READ_ONCE()
locking/lockdep: Remove the cross-release locking checks
locking/core: Remove break_lock field when CONFIG_GENERIC_LOCKBREAK=y
locking/core: Fix deadlock during boot on systems with GENERIC_LOCKBREAK
Linus Torvalds [Fri, 15 Dec 2017 19:40:24 +0000 (11:40 -0800)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Two fixes: a crash fix for an ARM SoC platform, and kernel-doc
warnings fixes"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/rt: Do not pull from current CPU if only one CPU to pull
sched/core: Fix kernel-doc warnings after code movement
Linus Torvalds [Fri, 15 Dec 2017 19:36:20 +0000 (11:36 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf tooling fix from Ingo Molnar:
"Synchronize kernel <-> tooling headers to resolve two build warnings
in the perf build"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/headers: Synchronize kernel <-> tooling headers
Linus Torvalds [Fri, 15 Dec 2017 19:34:29 +0000 (11:34 -0800)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull early_ioremap fix from Ingo Molnar:
"A boot hang fix when the EFI earlyprintk driver is enabled"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
mm/early_ioremap: Fix boot hang with earlyprintk=efi,keep
Linus Torvalds [Fri, 15 Dec 2017 19:32:09 +0000 (11:32 -0800)]
Merge tag 'for-linus-4.15-rc4-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two minor fixes for running as Xen dom0:
- when built as 32 bit kernel on large machines the Xen LAPIC
emulation should report a rather modern LAPIC in order to support
enough APIC-Ids
- The Xen LAPIC emulation is needed for dom0 only, so build it only
for kernels supporting to run as Xen dom0"
* tag 'for-linus-4.15-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: XEN_ACPI_PROCESSOR is Dom0-only
x86/Xen: don't report ancient LAPIC version
Trond Myklebust [Fri, 15 Dec 2017 02:24:08 +0000 (21:24 -0500)]
SUNRPC: Fix a race in the receive code path
We must ensure that the call to rpc_sleep_on() in xprt_transmit() cannot
race with the call to xprt_complete_rqst().
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=317
Fixes:
ce7c252a8c74 ("SUNRPC: Add a separate spinlock to protect..")
Cc: stable@vger.kernel.org # 4.14+
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Scott Mayhew [Fri, 8 Dec 2017 21:00:12 +0000 (16:00 -0500)]
nfs: don't wait on commit in nfs_commit_inode() if there were no commit requests
If there were no commit requests, then nfs_commit_inode() should not
wait on the commit or mark the inode dirty, otherwise the following
BUG_ON can be triggered:
[ 1917.130762] kernel BUG at fs/inode.c:578!
[ 1917.130766] Oops: Exception in kernel mode, sig: 5 [#1]
[ 1917.130768] SMP NR_CPUS=2048 NUMA pSeries
[ 1917.130772] Modules linked in: iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi blocklayoutdriver rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache sunrpc sg nx_crypto pseries_rng ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic crct10dif_common ibmvscsi scsi_transport_srp ibmveth scsi_tgt dm_mirror dm_region_hash dm_log dm_mod
[ 1917.130805] CPU: 2 PID: 14923 Comm: umount.nfs4 Tainted: G ------------ T 3.10.0-768.el7.ppc64 #1
[ 1917.130810] task:
c0000005ecd88040 ti:
c00000004cea0000 task.ti:
c00000004cea0000
[ 1917.130813] NIP:
c000000000354178 LR:
c000000000354160 CTR:
c00000000012db80
[ 1917.130816] REGS:
c00000004cea3720 TRAP: 0700 Tainted: G ------------ T (3.10.0-768.el7.ppc64)
[ 1917.130820] MSR:
8000000100029032 <SF,EE,ME,IR,DR,RI> CR:
22002822 XER:
20000000
[ 1917.130828] CFAR:
c00000000011f594 SOFTE: 1
GPR00:
c000000000354160 c00000004cea39a0 c0000000014c4700 c0000000018cc750
GPR04:
000000000000c750 80c0000000000000 0600000000000000 04eeb76bea749a03
GPR08:
0000000000000034 c0000000018cc758 0000000000000001 d000000005e619e8
GPR12:
c00000000012db80 c000000007b31200 0000000000000000 0000000000000000
GPR16:
0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20:
0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR24:
0000000000000000 c000000000dfc3ec 0000000000000000 c0000005eefc02c0
GPR28:
d0000000079dbd50 c0000005b94a02c0 c0000005b94a0250 c0000005b94a01c8
[ 1917.130867] NIP [
c000000000354178] .evict+0x1c8/0x350
[ 1917.130871] LR [
c000000000354160] .evict+0x1b0/0x350
[ 1917.130873] Call Trace:
[ 1917.130876] [
c00000004cea39a0] [
c000000000354160] .evict+0x1b0/0x350 (unreliable)
[ 1917.130880] [
c00000004cea3a30] [
c0000000003558cc] .evict_inodes+0x13c/0x270
[ 1917.130884] [
c00000004cea3af0] [
c000000000327d20] .kill_anon_super+0x70/0x1e0
[ 1917.130896] [
c00000004cea3b80] [
d000000005e43e30] .nfs_kill_super+0x20/0x60 [nfs]
[ 1917.130900] [
c00000004cea3c00] [
c000000000328a20] .deactivate_locked_super+0xa0/0x1b0
[ 1917.130903] [
c00000004cea3c80] [
c00000000035ba54] .cleanup_mnt+0xd4/0x180
[ 1917.130907] [
c00000004cea3d10] [
c000000000119034] .task_work_run+0x114/0x150
[ 1917.130912] [
c00000004cea3db0] [
c00000000001ba6c] .do_notify_resume+0xcc/0x100
[ 1917.130916] [
c00000004cea3e30] [
c00000000000a7b0] .ret_from_except_lite+0x5c/0x60
[ 1917.130919] Instruction dump:
[ 1917.130921]
7fc3f378 486734b5 60000000 387f00a0 38800003 4bdcb365 60000000 e95f00a0
[ 1917.130927]
694a0060 7d4a0074 794ad182 694a0001 <
0b0a0000>
892d02a4 2f890000 40de0134
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Cc: stable@vger.kernel.org # 4.5+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Mon, 4 Dec 2017 19:04:04 +0000 (14:04 -0500)]
xprtrdma: Spread reply processing over more CPUs
Commit
d8f532d20ee4 ("xprtrdma: Invoke rpcrdma_reply_handler
directly from RECV completion") introduced a performance regression
for NFS I/O small enough to not need memory registration. In multi-
threaded benchmarks that generate primarily small I/O requests,
IOPS throughput is reduced by nearly a third. This patch restores
the previous level of throughput.
Because workqueues are typically BOUND (in particular ib_comp_wq,
nfsiod_workqueue, and rpciod_workqueue), NFS/RDMA workloads tend
to aggregate on the CPU that is handling Receive completions.
The usual approach to addressing this problem is to create a QP
and CQ for each CPU, and then schedule transactions on the QP
for the CPU where you want the transaction to complete. The
transaction then does not require an extra context switch during
completion to end up on the same CPU where the transaction was
started.
This approach doesn't work for the Linux NFS/RDMA client because
currently the Linux NFS client does not support multiple connections
per client-server pair, and the RDMA core API does not make it
straightforward for ULPs to determine which CPU is responsible for
handling Receive completions for a CQ.
So for the moment, record the CPU number in the rpcrdma_req before
the transport sends each RPC Call. Then during Receive completion,
queue the RPC completion on that same CPU.
Additionally, move all RPC completion processing to the deferred
handler so that even RPCs with simple small replies complete on
the CPU that sent the corresponding RPC Call.
Fixes:
d8f532d20ee4 ("xprtrdma: Invoke rpcrdma_reply_handler ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Scott Mayhew [Tue, 5 Dec 2017 18:55:44 +0000 (13:55 -0500)]
nfs: fix a deadlock in nfs client initialization
The following deadlock can occur between a process waiting for a client
to initialize in while walking the client list during nfsv4 server trunking
detection and another process waiting for the nfs_clid_init_mutex so it
can initialize that client:
Process 1 Process 2
--------- ---------
spin_lock(&nn->nfs_client_lock);
list_add_tail(&CLIENTA->cl_share_link,
&nn->nfs_client_list);
spin_unlock(&nn->nfs_client_lock);
spin_lock(&nn->nfs_client_lock);
list_add_tail(&CLIENTB->cl_share_link,
&nn->nfs_client_list);
spin_unlock(&nn->nfs_client_lock);
mutex_lock(&nfs_clid_init_mutex);
nfs41_walk_client_list(clp, result, cred);
nfs_wait_client_init_complete(CLIENTA);
(waiting for nfs_clid_init_mutex)
Make sure nfs_match_client() only evaluates clients that have completed
initialization in order to prevent that deadlock.
This patch also fixes v4.0 trunking behavior by not marking the client
NFS_CS_READY until the clientid has been confirmed.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Haishuang Yan [Fri, 15 Dec 2017 02:46:16 +0000 (10:46 +0800)]
ip_gre: fix wrong return value of erspan_rcv
If pskb_may_pull return failed, return PACKET_REJECT instead of -ENOMEM.
Fixes:
84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN")
Cc: William Tu <u9012063@gmail.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniele Palmas [Thu, 14 Dec 2017 15:56:14 +0000 (16:56 +0100)]
net: usb: qmi_wwan: add Telit ME910 PID 0x1101 support
This patch adds support for Telit ME910 PID 0x1101.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 15 Dec 2017 18:35:37 +0000 (13:35 -0500)]
Merge branch 'net-sched-Make-qdisc-offload-uapi-uniform'
Yuval Mintz says:
====================
net: sched: Make qdisc offload uapi uniform
Several qdiscs can already be offloaded to hardware, but there's an
inconsistecy in regard to the uapi through which they indicate such
an offload is taking place - indication is passed to the user via
TCA_OPTIONS where each qdisc retains private logic for setting it.
The recent addition of offloading to RED in
602f3baf2218 ("net_sch: red: Add offload ability to RED qdisc") caused
the addition of yet another uapi field for this purpose -
TC_RED_OFFLOADED.
For clarity and prevention of bloat in the uapi we want to eliminate
said added uapi, replacing it with a common mechanism that can be used
to reflect offload status of the various qdiscs.
The first patch introduces TCA_HW_OFFLOAD as the generic message meant
for this purpose. The second changes the current RED implementation into
setting the internal bits necessary for passing it, and the third removes
TC_RED_OFFLOADED as its no longer needed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Thu, 14 Dec 2017 13:54:31 +0000 (15:54 +0200)]
pkt_sched: Remove TC_RED_OFFLOADED from uapi
Following the previous patch, RED is now using the new uniform uapi
for indicating it's offloaded. As a result, TC_RED_OFFLOADED is no
longer utilized by kernel and can be removed [as it's still not
part of any stable release].
Fixes:
602f3baf2218 ("net_sch: red: Add offload ability to RED qdisc")
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Thu, 14 Dec 2017 13:54:30 +0000 (15:54 +0200)]
net: sched: Move to new offload indication in RED
Let RED utilize the new internal flag, TCQ_F_OFFLOADED,
to mark a given qdisc as offloaded instead of using a dedicated
indication.
Also, change internal logic into looking at said flag when possible.
Fixes:
602f3baf2218 ("net_sch: red: Add offload ability to RED qdisc")
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Thu, 14 Dec 2017 13:54:29 +0000 (15:54 +0200)]
net: sched: Add TCA_HW_OFFLOAD
Qdiscs can be offloaded to HW, but current implementation isn't uniform.
Instead, qdiscs either pass information about offload status via their
TCA_OPTIONS or omit it altogether.
Introduce a new attribute - TCA_HW_OFFLOAD that would form a uniform
uAPI for the offloading status of qdiscs.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 15 Dec 2017 17:46:43 +0000 (12:46 -0500)]
Merge branch 'aquantia-fixes'
Igor Russkikh says:
====================
net: aquantia: Atlantic driver 12/2017 updates
The patchset contains important hardware fix for machines with large MRRS
and couple of improvement in stats and capabilities reporting
patch v3:
- Fixed patch #7 after Andrew's finding. NIC level stats actually
have to be cleaned only on hw struct creation (and this is done
in kzalloc). On each hwinit we only have to reset link state
to make sure hw stats update will not increment nic stats during init.
patch v2:
- split into more detailed commits
Comment from David on wrong defines case will be submitted separately later
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Thu, 14 Dec 2017 09:34:48 +0000 (12:34 +0300)]
net: aquantia: Increment driver version
Add a suffix to distinguish kernel mainline version and aquantia releases
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Thu, 14 Dec 2017 09:34:47 +0000 (12:34 +0300)]
net: aquantia: Fix typo in ethtool statistics names
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Thu, 14 Dec 2017 09:34:46 +0000 (12:34 +0300)]
net: aquantia: Update hw counters on hw init
On very first start we should read out current HW counter values
to make diff based calculations later.
This also should be done each time NIC gets down/up or wakes up
after sleep state. We reset link state explicitly to prevent diffs
from being summed this first time.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / platform / kernel / linux-rpi.git / log