ASoC: amd: acp: Fix possible UAF in acp_dma_open

Smatch report warning as follows:

sound/soc/amd/acp/acp-platform.c:199 acp_dma_open() warn:
  '&stream->list' not removed from list

If snd_pcm_hw_constraint_integer() fails in acp_dma_open(),
stream will be freed, but stream->list will not be removed from
adata->stream_list, then list traversal may cause UAF.

Fix by adding the newly allocated stream to the list once it's fully
initialised.

Fixes: 7929985cfe36 ("ASoC: amd: acp: Initialize list to store acp_stream during pcm_open")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221118030056.3135960-1-cuigaosheng1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_nau8825: support rt1015p speaker amplifier

Add rt1015p speaker amplifier support with a new board info
'adl_rt1015p_nau8825' which supports NAU8825 on SSP0 and ALC1015Q on
SSP1.

Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221117231919.112483-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: probes: Check ops before memory allocation

We may check ops before spending resources on memory allocation.
While at it, utilize dev_get_platdata() helper.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221117103223.74425-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: wsa883x: Simplify with dev_err_probe

Code can be a bit simpler with dev_err_probe().

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221109163759.1158837-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: wsa883x: Shutdown on error path

If probe fails, toggle shutdown via GPIO to save power and reverse
probe actions.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221109163759.1158837-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: amd: ps: Move acp63_dev_data strcture from PCI driver

Move acp63_dev_data structure from PCI driver to acp header file.

Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://lore.kernel.org/r/20221116105938.762550-2-Syed.SabaKareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: amd: ps: update macros with ps platform naming convention

Update macros using ps platform naming convention.

Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://lore.kernel.org/r/20221116105938.762550-1-Syed.SabaKareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Adds the combination of headset codec ALC5682I-VD + amp rt1019p

Merge series from Ajye Huang <ajye_huang@compal.corp-partner.google.com>:

v1:
- machine driver:
  - Adds the combination of headset codec ALC5682I-VD + amp rt1019p.
  - Remove the duplicate code in machine driver.

Ajye Huang (2):
  ASoC: Intel: sof_rt5682: add support for ALC5682I-VD with amp rt1019p
  ASoC: Intel: sof rt5682: remove the duplicate codes

 sound/soc/intel/boards/sof_rt5682.c               | 7 +------
 sound/soc/intel/common/soc-acpi-intel-adl-match.c | 4 ++--
 2 files changed, 3 insertions(+), 8 deletions(-)

--
2.25.1

ASoC: rt1318: Add RT1318 SDCA vendor-specific driver

This is the initial amplifier driver for rt1318 SDCA version.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20221108092727.13011-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof rt5682: remove the duplicate codes

Remove the redundant code to prevent user confuse.

Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221108042716.2930255-3-ajye_huang@compal.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_rt5682: add support for ALC5682I-VD with amp rt1019p

This patch adds the driver data for two rt1019 speaker amplifiers on
SSP1 and ALC5682I-VD on SSP0 for ADL platform.

Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221108042716.2930255-2-ajye_huang@compal.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: core: fix wrong size kzalloc for rtd's components member

The actual space for struct snd_soc_component has been allocated by
snd_soc_register_component, here rtd's components are pointers to
components, I replace the base size from *component to component.

Signed-off-by: lishqchn <lishqchn@qq.com>
Link: https://lore.kernel.org/r/tencent_59850BB028662B6F2D49D7F3624AB84CCF05@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: tx-macro: add dmic support via tx macro

DMIC Paths into LPASS digital codec can go via tx-macro or va-macro codec, add
support to tx-macro path as va-macro path is already supported.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221115065430.4126-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: sunxi: use devm_platform_get_and_ioremap_resource()

Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Acked-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/202211111641514826535@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: pxa: fix null-pointer dereference in filter()

kasprintf() would return NULL pointer when kmalloc() fail to allocate.
Need to check the return pointer before calling strcmp().

Fixes: 7a824e214e25 ("ASoC: mmp: add audio dma support")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Link: https://lore.kernel.org/r/20221114085629.1910435-1-zengheng4@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: Remove a useless include

<linux/gcd.h> is not needed for these drivers. Remove the corresponding
#include.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/875ca433849025edf8c23624cf29b0e2250bba50.1668287523.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: wsa883x: use correct header file

Fix build errors when GPIOLIB is not set/enabled:

../sound/soc/codecs/wsa883x.c: In function 'wsa883x_probe':
../sound/soc/codecs/wsa883x.c:1394:25: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_regulator_get_optional'? [-Werror=implicit-function-declaration]
         wsa883x->sd_n = devm_gpiod_get_optional(&pdev->dev, "powerdown",
../sound/soc/codecs/wsa883x.c:1395:49: error: 'GPIOD_FLAGS_BIT_NONEXCLUSIVE' undeclared (first use in this function)
         GPIOD_FLAGS_BIT_NONEXCLUSIVE);
../sound/soc/codecs/wsa883x.c:1414:9: error: implicit declaration of function 'gpiod_direction_output'; did you mean 'gpio_direction_output'? [-Werror=implicit-function-declaration]
         gpiod_direction_output(wsa883x->sd_n, 1);

Fixes: 43b8c7dc85a1 ("ASoC: codecs: add wsa883x amplifier support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Banajit Goswami <bgoswami@quicinc.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: alsa-devel@alsa-project.org
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221108001829.5100-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: wsa883x: Use proper shutdown GPIO polarity

The shutdown GPIO is active low (SD_N), but this depends on actual board
layout.  Linux drivers should only care about logical state, where high
(1) means shutdown and low (0) means do not shutdown.

Invert the GPIO to match logical value.

Fixes: 43b8c7dc85a1 ("ASoC: codecs: add wsa883x amplifier support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221110133512.478831-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: qcom,wsa883x: Use correct SD_N polarity

Use correct polarity in example and powerdown-gpios description.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221110133512.478831-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: add new Dell devices support

Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:

Add 2 Dell SKU support.

ASoC: Intel: add more ACPI tables/quirks for RPL/MTL

Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

Add support for two RaptorLake SoundWire SKUs and one test board for
MeteorLake.

There will be additional RaptorLake SKUs shared when validation is
complete.

ASoC: audio-graph-card2: remove Experimental announce

Audio Graph Card2 has been announcing "Audio Graph Card2 is
still under Experimental stage", but it is time to remove it.
This patch removes it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k042nm6s.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qcom: q6prm: Correct module description

The description was copied from APM driver.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221111091328.31549-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Set BQ parameters for some Dell models

There are some Dell SKUs that need to set the parameters of the
crossover filter (biquad).  Each amplifier connects to one tweeter
speaker and one woofer speaker.  We should control HPF/LPF to output the
proper frequency for the different speakers.  If the codec driver got
the BQ parameters from the device property, it will apply these
parameters to the hardware.

ASoC: Intel: soc-acpi: add SKU 0C40 SoundWire configuration

Audio hardware configuration of SKU 0C40 product is rt711 on link2,
two rt1316s on link0 and link1, rt714 on link 3.

Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221111045016.46573-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_sdw: Add support for SKU 0C40 product

SKU 0C40 product supports a SoundWire headset codec, SoundWire
capture from local microphones and two SoundWire amplifiers.

Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221111045016.46573-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: soc-acpi: add SKU 0C10 SoundWire configuration

Audio hardware configuration of SKU 0C10 product is rt714 on link0,
two rt1316s on link1 and link2

Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221111045016.46573-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_sdw: Add support for SKU 0C10 product

SKU 0C10 product supports SoundWire capture from local microphone
and two SoundWire amplifiers(no headset codec).

Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221111045016.46573-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: soc-acpi: add MTL AIC SoundWire configurations

Add support to the following daughter card:

SDW0: MX98373 Speaker
SDW2: ALC5682 Headset

Share same driver data used by sof_sdw driver for mtlrvp.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221110225432.144184-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: soc-acpi: add SKU 0C40 SoundWire configuration

Audio hardware configuration of SKU 0C40 product is rt711 on link2,
two rt1316s on link0 and link1, rt714 on link 3.

Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221110225432.144184-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_sdw: Add support for SKU 0C40 product

SKU 0C40 product supports a SoundWire headset codec, SoundWire
capture from local microphones and two SoundWire amplifiers.

Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221110225432.144184-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: soc-acpi: add SKU 0C10 SoundWire configuration

Audio hardware configuration of SKU 0C10 product is rt714 on link0,
two rt1316s on link1 and link2

Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221110225432.144184-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_sdw: Add support for SKU 0C10 product

SKU 0C10 product supports SoundWire capture from local microphone
and two SoundWire amplifiers(no headset codec).

Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221110225432.144184-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: lpass-wsa-macro: parse clock-output-names

If we have several instances of WSA macro, each one of them should
register clock with unique name, so parse clock-output-names for this.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221103195341.174972-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: qcom,lpass: do not hard-code clock-output-names

The purpose of clock-output-names is to customize desired clock name,
not use one, same name.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221103195341.174972-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_sdw_rt1316: add BQ params for the Dell models

The Dell SKU 0B00/0B01/0AFE/0AFF model needs the BQ params for the tweeter/woofer.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20221109091317.17240-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_sdw_rt1308: add BQ params for the Dell models

The Dell SKU 0A5D/0A5E/0990/098F model needs the BQ params for the tweeter/woofer.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20221109091306.17221-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt1316-sdw: get BQ params property and apply them

If the machine driver level sets the BQ params into the device property,
the codec driver will get the BQ params and apply them.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20221109091244.17198-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt1308-sdw: get BQ params property and apply them

If the machine driver level sets the BQ params into the device property,
the codec driver will get the BQ params and apply them.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20221109091234.17180-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tegra: Fix spelling mistake "fliter" -> "filter"

There is a spelling mistake in struct member fliter_structure.
Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221108111340.115387-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: fsl-sai: Sort main section properties

Sort main section properties, no functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221104160315.213836-3-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: fsl-sai: Use minItems 5 for i.MX8MN clock and similar

The i.MX8MN currently uses "bus", "mclk0", "mclk1", "mclk2", "mclk3"
clock, which adds up to 5 clock total. Use minItems 5 for this setup.

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221104160315.213836-2-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: fsl-sai: Fix mx6ul and mx7d compatible strings

Describe existing used combinations of compatible strings on MX6UL
and MX7D, which are backward compatible with MX6SX. Add the missing
imx7d-sai compatible string which is used on i.MX7 .

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221104160315.213836-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: da7219: Do not export da7219_aad_jack_det()

Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:

Goal of the series is to drop any usage of the internal function.

First, update all users to utilize component->set_jack() and then remove
the relevant EXPORT_SYMBOL_GPL.

ASoC: SOF: ipc4-topology: Add widget queue support

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

with SOF topology2 for IPC4, widgets might have mutliple queues they can be
connected.
The queues to use between components are descibed in the topology file.

This series adds widget queue support (specify which pin to connect) for
ipc4-topology with topology2.

Note: currently queue 0 of a widget is used as hardwired default.

ASoC: simpe-card/audio-graph fixups

Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:

These are simpe-card/audio-graph fixup patches.

Adjust usage of rt5682(s) power supply properties

Merge series from Nícolas F. R. A. Prado <nfraprado@collabora.com>:

This series sets straight the usage of power supply properties for the
rt5682 and rt5682s audio codecs.

These properties were already being used by sc7180-trogdor.dtsi (and
derived DTs like sc7180-trogdor-kingoftown.dtsi).

We start by documenting the power supplies that are already in use and
then add few others that were missing to the bindings.

Then we update the drivers to also support the new supplies.

Finally we update the trogdor DTs so they have the newly added but
required supplies and remove a superfluous one that was causing
warnings.

ASoC: SOF: get pipeline instance id from pipe_widget->instance_id

Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:

Currently we set pipeline instance id = swidget->pipeline_id, but
pipeline_id is from topology and can be any number. In fact, the
number of pipelines is limited. This patch use ida to allocate pipeline
instance id and will be used for pipeline instance id in the IPC
message.

ASoC: SOF: Intel: update D0i3 registers for MTL

Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

MeteorLake relies on a different register for D0i3 configuration, add
a platform-specific callback to abstract the differences.

ASoC: mediatek: Register machine drivers to module device table

Merge series from Nícolas F. R. A. Prado <nfraprado@collabora.com>:

Some ASoC machine drivers for MediaTek platforms were not being
registered to the module device table, preventing them to be
automatically loaded when built as modules. This series adds the missing
registration to the drivers.

ASoC: mediatek: mt8195-mt6359: Register to module device table

Register the compatibles for this module on the module device table so
it can be automatically loaded when a matching device is found on the
system.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20221107160437.740353-10-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: mediatek: mt8192-mt6359: Register to module device table

Register the compatibles for this module on the module device table so
it can be automatically loaded when a matching device is found on the
system.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20221107160437.740353-9-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: mediatek: mt8186-rt5682: Register to module device table

Register the compatibles for this module on the module device table so
it can be automatically loaded when a matching device is found on the
system.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20221107160437.740353-8-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: mediatek: mt8186-da7219: Register to module device table

Register the compatibles for this module on the module device table so
it can be automatically loaded when a matching device is found on the
system.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20221107160437.740353-7-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: mediatek: mt8183-mt6358: Register to module device table

Register the compatibles for this module on the module device table so
it can be automatically loaded when a matching device is found on the
system.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20221107160437.740353-6-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: mediatek: mt8183-da7219: Register to module device table

Register the compatibles for this module on the module device table so
it can be automatically loaded when a matching device is found on the
system.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20221107160437.740353-5-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: mediatek: mt6797-mt6351: Register to module device table

Register the compatibles for this module on the module device table so
it can be automatically loaded when a matching device is found on the
system.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20221107160437.740353-4-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: mediatek: mt2701-wm8960: Register to module device table

Register the compatibles for this module on the module device table so
it can be automatically loaded when a matching device is found on the
system.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20221107160437.740353-3-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: mediatek: mt2701-cs42448: Register to module device table

Register the compatibles for this module on the module device table so
it can be automatically loaded when a matching device is found on the
system.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20221107160437.740353-2-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4: get pipeline instance id from pipe_widget->instance_id

Currently we set pipeline instance id = swidget->pipeline_id, but
pipeline_id is from topology and can be any number. In fact, the
number of pipelines is limited. This patch use ida to allocate pipeline
instance id and will be used for pipeline instance id in the IPC
message.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221108002910.2819709-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-loader: get max pipeline number

Get max pipeline number from firmware configuration.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221108002910.2819709-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-topology: rename sof_ipc4_widget_free_comp

sof_ipc4_widget_free_comp is dedicated to pipeline. Rename it
to sof_ipc4_widget_free_comp_pipeline.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221108002910.2819709-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: set d0i3 register with d0i3_offset

Set the d0i3 with d0i3_offset for different platforms

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221107164154.21925-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: add d0i3_offset in chip_info

MTL has different d0i3 offset compared to cavs platforms.
Use d0i3_offset to unify the setting.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221107164154.21925-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: add d0i3 definition for MTL

MTL has a different offset of d0i3 compared to cavs platforms.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221107164154.21925-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5682: Support DBVDD and LDO1-IN supplies

Add support for the DBVDD and LDO1-IN supplies.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20221102182002.255282-7-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5682s: Support DBVDD and LDO1-IN supplies

Add support for the DBVDD and LDO1-IN supplies.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20221102182002.255282-6-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: rt5682: Add DBVDD and LDO1-IN supplies

The rt5682 codec has two additional power supply pins, DBVDD and
LDO1_IN, that aren't currently described in the binding. Add them.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221102182002.255282-5-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: rt5682: Add AVDD, MICVDD and VBAT supplies

The rt5682 codec has three supplies - AVDD, MICVDD and VBAT - which are
already used by sc7180-trogdor.dtsi. Document them in the binding.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20221102182002.255282-4-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: realtek,rt5682s: Add DBVDD and LDO1-IN supplies

The rt5682s codec has two additional power supply pins, DBVDD and
LDO1_IN, that aren't currently described in the binding. Add them.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221102182002.255282-3-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: realtek,rt5682s: Add AVDD and MICVDD supplies

The rt5682s codec has two supplies - AVDD and MICVDD - which are already
used by sc7180-trogdor-kingoftown.dtsi. Document them in the binding.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20221102182002.255282-2-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda-loader: use small buffer for iccmax stream

The data received via iccmax stream is not used anywhere, so no need to
allocate a big DMA buffer for it. This is especially important as the
allocation is done even in cases where reload of the firmware is skipped
and execution happens directly from the firmware stored in IMR.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221107072621.28904-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-topology: Implement tear_down_all_pipelines callback

During system suspend there is a chance that the running stream undergo
an xrun and instead of the expected SNDRV_PCM_TRIGGER_SUSPEND trigger
we will receive SNDRV_PCM_TRIGGER_STOP.

The handling of SUSPEND and STOP triggers differ that case of the later
the sof_pcm_stream_free() will be called with free_widget_list = false.
But we must make sure that all active widgets and streams are free before
entering suspend in order to be able to resume without error.

We can utilize the tear_down_all_pipelines to put the system to an expected
state and to fix the suspend/resume error.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221107084158.26629-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: mediatek: mt8183-mt6358: Register to module device table

Register the compatibles for this module on the module device table so
it can be automatically loaded when a matching device is found on the
system.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221104212409.603970-2-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: mediatek: mt8183-da7219: Register to module device table

Register the compatibles for this module on the module device table so
it can be automatically loaded when a matching device is found on the
system.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221104212409.603970-1-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: da7219: Do not export internal symbols

With all users utilizing component->set_jack(), there is no need to
export da7219_aad_jack_det() function.

While at it, remove exports from all other functions as well.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221031160227.2352630-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: avs: Drop da7219_aad_jack_det() usage

Do not access the internal function directly, do so through
component->set_jack() instead.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221031160227.2352630-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: amd: Drop da7219_aad_jack_det() usage

Do not access the internal function directly, do so through
component->set_jack() instead.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221031160227.2352630-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rockchip: Drop da7219_aad_jack_det() usage

Do not access the internal function directly, do so through
component->set_jack() instead.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221031160227.2352630-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: mediatek: Drop da7219_aad_jack_det() usage

Do not access the internal function directly, do so through
component->set_jack() instead.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221031160227.2352630-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Drop da7219_aad_jack_det() usage

Do not access the internal function directly, do so through
component->set_jack() instead.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221031160227.2352630-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: da7219: Introduce set_jack() callback

Codec driver for da7219 implements jack detect functionality, but does
not integrate it with the framework. Platform component drivers are
accessing the functionality through internal da7219_aad_jack_det()
instead.

Address this by implementing set_jack() for the codec.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221031160227.2352630-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: topology: Add helper to get/put widget queue id

Add get/put queue id helper to manage queue id in route
setup and route free.

The queue allocation rules are:

  - If widget only has one sink/source pin, zero will be
returned as the queue ID directly.

  - If widget has more than one sink/source pins, and pin
binding array is defined in topology, queue ID will be
allocated according to the pin binding array.

  - If widget has more than one sink/sink pins, and pin
binding array is not defined, Linux ID allocation will be
used to allocate queue ID dynamically.

Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Suggested-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221107085706.2550-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Add support to parse pin binding array from topology

Add support for parsing sink/source pin binding array
per widget from topology. The pin binding arrays will
be used to determine the source and sink queue IDs during
widget binding for widget that requires special pin binding.

An example of widget that requires special pin binding is
the smart amplifier widget, its feedback sink pin has to be
connected to a capture DAI copier for codec feedback, while
the other sink pin has to be connected to a host DAI copier.
Pin ID is required during widget binding for correct route setup.

Conversely, the pin ID for 'generic' pins is not defined in the
topology and will be allocated by the kernel dynamically. When
only one pin is supported, the pin ID shall always be zero. When
more than one pin is supported, the pin ID is determined with the
ID allocation mechanism in the kernel.

Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Suggested-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221107085706.2550-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Add support for parsing the number of sink/source pins

Add support for parsing the number of sink/source pins
per widget from topology. They will be used to determine
the sink/source queue IDs during widget binding.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Suggested-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221107085706.2550-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: audio-graph-card2: check also dpcm node for convert-xxx

DPCM connection on Card2, its DT looks like below.
Current Card2 is checking (a)/(b) part only for convert-xxx settings.
But it is not useful. This patch enables its settings at (A)/(B) part
too. (A)/(B) settings will be overwritten (a)/(b) settings if it has.

<Image>       (A) (a)
Card2 <--+--> FE <---> CPU
 |
 +--> BE <---> Codec
      (B) (b)

<DT>
card2-sound {
...
links = <fe, be>; /* (A) (B) */
};

dpcm {
/* FE */
ports@0 {
/* (A) */
fe: port { fe_ep: endpoint { remote-endpoint = <&cpu_ep>; } };
};
/* BE */
ports@1 {
/* (B) */
be: port {
convert-rate = <44100>; /* This patch enables this */
be_ep: endpoint { remote-endpoint = <&codec_ep>; }
};
};
};

cpu {
/* CPU (a) */
port { cpu_ep: endpoint { remote-endpoint = <&fe_ep>; } };
};

codec {
/* Codec (b) */
port {
convert-rate = <48000>; /* (B) settings will be over written here */
codec_ep: endpoint { remote-endpoint = <&be_ep>; }
};
};

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871qqn8fst.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: audio-graph-card2-custom-sample.dtsi: add convert-rate for DPCM (MIXer)

audio-graph-card2-custom-sample.dtsi is assuming that
DPCM sample is MIXer connection.

FE BE
        ****
CPU3 -- *  * -- Codec3
CPU4 -- *  *
        ****

CPU3/CPU4 need to convert rate in this case.
This patch adds missing "convert-rate" setting sample for it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8735b38fta.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: simple-card-utils: remove asoc_simple_convert_fixup()

No one is using asoc_simple_convert_fixup(), we don't need to
export its symbol. This patch removes it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874jvj8ftp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Linux 6.1-rc4

Merge tag 'cxl-fixes-for-6.1-rc4' of git://git./linux/kernel/git/cxl/cxl

Pull cxl fixes from Dan Williams:
 "Several fixes for CXL region creation crashes, leaks and failures.

  This is mainly fallout from the original implementation of dynamic CXL
  region creation (instantiate new physical memory pools) that arrived
  in v6.0-rc1.

  Given the theme of "failures in the presence of pass-through decoders"
  this also includes new regression test infrastructure for that case.

  Summary:

   - Fix region creation crash with pass-through decoders

   - Fix region creation crash when no decoder allocation fails

   - Fix region creation crash when scanning regions to enforce the
     increasing physical address order constraint that CXL mandates

   - Fix a memory leak for cxl_pmem_region objects, track 1:N instead of
     1:1 memory-device-to-region associations.

   - Fix a memory leak for cxl_region objects when regions with active
     targets are deleted

   - Fix assignment of NUMA nodes to CXL regions by CFMWS (CXL Window)
     emulated proximity domains.

   - Fix region creation failure for switch attached devices downstream
     of a single-port host-bridge

   - Fix false positive memory leak of cxl_region objects by recycling
     recently used region ids rather than freeing them

   - Add regression test infrastructure for a pass-through decoder
     configuration

   - Fix some mailbox payload handling corner cases"

* tag 'cxl-fixes-for-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/region: Recycle region ids
  cxl/region: Fix 'distance' calculation with passthrough ports
  tools/testing/cxl: Add a single-port host-bridge regression config
  tools/testing/cxl: Fix some error exits
  cxl/pmem: Fix cxl_pmem_region and cxl_memdev leak
  cxl/region: Fix cxl_region leak, cleanup targets at region delete
  cxl/region: Fix region HPA ordering validation
  cxl/pmem: Use size_add() against integer overflow
  cxl/region: Fix decoder allocation crash
  ACPI: NUMA: Add CXL CFMWS 'nodes' to the possible nodes set
  cxl/pmem: Fix failure to account for 8 byte header for writes to the device LSA.
  cxl/region: Fix null pointer dereference due to pass through decoder commit
  cxl/mbox: Add a check on input payload size

Merge tag 'hwmon-for-v6.1-rc4' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "Fix two regressions:

   - Commit 54cc3dbfc10d ("hwmon: (pmbus) Add regulator supply into
     macro") resulted in regulator undercount when disabling regulators.
     Revert it.

   - The thermal subsystem rework caused the scmi driver to no longer
     register with the thermal subsystem because index values no longer
     match. To fix the problem, the scmi driver now directly registers
     with the thermal subsystem, no longer through the hwmon core"

* tag 'hwmon-for-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  Revert "hwmon: (pmbus) Add regulator supply into macro"
  hwmon: (scmi) Register explicitly with Thermal Framework

Merge tag 'perf_urgent_for_v6.1_rc4' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Borislav Petkov:

 - Add Cooper Lake's stepping to the PEBS guest/host events isolation
   fixed microcode revisions checking quirk

 - Update Icelake and Sapphire Rapids events constraints

 - Use the standard energy unit for Sapphire Rapids in RAPL

 - Fix the hw_breakpoint test to fail more graciously on !SMP configs

* tag 'perf_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Add Cooper Lake stepping to isolation_ucodes[]
  perf/x86/intel: Fix pebs event constraints for SPR
  perf/x86/intel: Fix pebs event constraints for ICL
  perf/x86/rapl: Use standard Energy Unit for SPR Dram RAPL domain
  perf/hw_breakpoint: test: Skip the test if dependencies unmet

Merge tag 'x86_urgent_for_v6.1_rc4' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:

 - Add new Intel CPU models

 - Enforce that TDX guests are successfully loaded only on TDX hardware
   where virtualization exception (#VE) delivery on kernel memory is
   disabled because handling those in all possible cases is "essentially
   impossible"

 - Add the proper include to the syscall wrappers so that BTF can see
   the real pt_regs definition and not only the forward declaration

* tag 'x86_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Add several Intel server CPU model numbers
  x86/tdx: Panic on bad configs that #VE on "private" memory access
  x86/tdx: Prepare for using "INFO" call for a second purpose
  x86/syscall: Include asm/ptrace.h in syscall_wrapper header

Merge tag 'kbuild-fixes-v6.1-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Use POSIX-compatible grep options

 - Document git-related tips for reproducible builds

 - Fix a typo in the modpost rule

 - Suppress SIGPIPE error message from gcc-ar and llvm-ar

 - Fix segmentation fault in the menuconfig search

* tag 'kbuild-fixes-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: fix segmentation fault in menuconfig search
  kbuild: fix SIGPIPE error message for AR=gcc-ar and AR=llvm-ar
  kbuild: fix typo in modpost
  Documentation: kbuild: Add description of git for reproducible builds
  kbuild: use POSIX-compatible grep option

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"ARM:

   - Fix the pKVM stage-1 walker erronously using the stage-2 accessor

   - Correctly convert vcpu->kvm to a hyp pointer when generating an
     exception in a nVHE+MTE configuration

   - Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them

   - Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE

   - Document the boot requirements for FGT when entering the kernel at
     EL1

  x86:

   - Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()

   - Make argument order consistent for kvcalloc()

   - Userspace API fixes for DEBUGCTL and LBRs"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Fix a typo about the usage of kvcalloc()
  KVM: x86: Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()
  KVM: VMX: Ignore guest CPUID for host userspace writes to DEBUGCTL
  KVM: VMX: Fold vmx_supported_debugctl() into vcpu_supported_debugctl()
  KVM: VMX: Advertise PMU LBRs if and only if perf supports LBRs
  arm64: booting: Document our requirements for fine grained traps with SME
  KVM: arm64: Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
  KVM: Check KVM_CAP_DIRTY_LOG_{RING, RING_ACQ_REL} prior to enabling them
  KVM: arm64: Fix bad dereference on MTE-enabled systems
  KVM: arm64: Use correct accessor to parse stage-1 PTEs

Merge tag 'for-linus-6.1-rc4-tag' of git://git./linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:
 "One fix for silencing a smatch warning, and a small cleanup patch"

* tag 'for-linus-6.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  x86/xen: simplify sysenter and syscall setup
  x86/xen: silence smatch warning in pmu_msr_chk_emulated()

Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "Fix a number of bugs, including some regressions, the most serious of
  which was one which would cause online resizes to fail with file
  systems with metadata checksums enabled.

  Also fix a warning caused by the newly added fortify string checker,
  plus some bugs that were found using fuzzed file systems"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix fortify warning in fs/ext4/fast_commit.c:1551
  ext4: fix wrong return err in ext4_load_and_init_journal()
  ext4: fix warning in 'ext4_da_release_space'
  ext4: fix BUG_ON() when directory entry has invalid rec_len
  ext4: update the backup superblock's at the end of the online resize

Merge tag '6.1-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
 "One symlink handling fix and two fixes foir multichannel issues with
  iterating channels, including for oplock breaks when leases are
  disabled"

* tag '6.1-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix use-after-free on the link name
  cifs: avoid unnecessary iteration of tcp sessions
  cifs: always iterate smb sessions using primary channel

Merge tag 'trace-v6.1-rc3' of git://git./linux/kernel/git/trace/linux-trace

Pull `lTracing fixes for 6.1-rc3:

 - Fixed NULL pointer dereference in the ring buffer wait-waiters code
   for machines that have less CPUs than what nr_cpu_ids returns.

   The buffer array is of size nr_cpu_ids, but only the online CPUs get
   initialized.

 - Fixed use after free call in ftrace_shutdown.

 - Fix accounting of if a kprobe is enabled

 - Fix NULL pointer dereference on error path of fprobe rethook_alloc().

 - Fix unregistering of fprobe_kprobe_handler

 - Fix memory leak in kprobe test module

* tag 'trace-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: kprobe: Fix memory leak in test_gen_kprobe/kretprobe_cmd()
  tracing/fprobe: Fix to check whether fprobe is registered correctly
  fprobe: Check rethook_alloc() return in rethook initialization
  kprobe: reverse kp->flags when arm_kprobe failed
  ftrace: Fix use-after-free for dynamic ftrace_ops
  ring-buffer: Check for NULL cpu_buffer in ring_buffer_wake_waiters()

Merge tag 'kvmarm-fixes-6.1-3' of git://git./linux/kernel/git/kvmarm/kvmarm into HEAD

* Fix the pKVM stage-1 walker erronously using the stage-2 accessor

* Correctly convert vcpu->kvm to a hyp pointer when generating
  an exception in a nVHE+MTE configuration

* Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them

* Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE

* Document the boot requirements for FGT when entering the kernel
  at EL1