Marek Vasut [Thu, 31 Mar 2022 15:05:08 +0000 (17:05 +0200)]
drm: bridge: icn6211: Rework ICN6211_DSI to chipone_writeb()
Rename and inline macro ICN6211_DSI() into function chipone_writeb()
to keep all function names lower-case. No functional change.
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-11-marex@denx.de
Marek Vasut [Thu, 31 Mar 2022 15:05:07 +0000 (17:05 +0200)]
drm: bridge: icn6211: Add I2C configuration support
The ICN6211 chip starts in I2C configuration mode after cold boot.
Implement support for configuring the chip via I2C in addition to
the current DSI LP command mode configuration support. The later
seems to be available only on chips which have additional MCU on
the panel/bridge board which preconfigures the ICN6211, while the
I2C configuration mode added by this patch does not require any
such MCU.
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-10-marex@denx.de
Marek Vasut [Thu, 31 Mar 2022 15:05:06 +0000 (17:05 +0200)]
drm: bridge: icn6211: Implement atomic_get_input_bus_fmts
Implement .atomic_get_input_bus_fmts callback, which sets up the
input (DSI-end) format, and that format can then be used in pipeline
format negotiation between the DSI-end of this bridge and the other
component closer to the scanout engine.
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-9-marex@denx.de
Marek Vasut [Thu, 31 Mar 2022 15:05:05 +0000 (17:05 +0200)]
drm: bridge: icn6211: Set SYS_CTRL_1 to value used in examples
Both example code [1], [2] as well as one provided by custom panel vendor
set register SYS_CTRL_1 to 0x88. What exactly does the value mean is unknown
due to unavailable datasheet. Align this register value with example code.
[1] https://github.com/rockchip-linux/kernel/blob/develop-4.19/drivers/gpu/drm/bridge/icn6211.c
[2] https://github.com/tdjastrzebski/ICN6211-Configurator
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-8-marex@denx.de
Marek Vasut [Thu, 31 Mar 2022 15:05:04 +0000 (17:05 +0200)]
drm: bridge: icn6211: Disable DPI color swap
The chip is capable of swapping DPI RGB channels. The driver currently
does not implement support for this functionality. Write the MIPI_PN_SWAP
register to 0 to assure the color swap is disabled.
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-7-marex@denx.de
Marek Vasut [Thu, 31 Mar 2022 15:05:03 +0000 (17:05 +0200)]
drm: bridge: icn6211: Use DSI burst mode without EoT and with LP command mode
The DSI burst mode is more energy efficient than the DSI sync pulse mode,
make use of the burst mode since the chip supports it as well. Disable the
generation of EoT packet, the chip ignores it, so no point in emitting it.
Enable transmission of data in LP mode, otherwise register read via DSI
does not work with this chip.
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-6-marex@denx.de
Marek Vasut [Thu, 31 Mar 2022 15:05:02 +0000 (17:05 +0200)]
drm: bridge: icn6211: Add generic DSI-to-DPI PLL configuration
The chip contains fractional PLL, however the driver currently hard-codes
one specific PLL setting. Implement generic PLL parameter calculation code,
so any DPI panel with arbitrary pixel clock can be attached to this bridge.
The datasheet for this bridge is not available, the PLL behavior has been
inferred from [1] and [2] and by analyzing the DPI pixel clock with scope.
The PLL limits might be wrong, but at least the calculated values match all
the example code available. This is better than one hard-coded pixel clock
value anyway.
[1] https://github.com/rockchip-linux/kernel/blob/develop-4.19/drivers/gpu/drm/bridge/icn6211.c
[2] https://github.com/tdjastrzebski/ICN6211-Configurator
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-5-marex@denx.de
Marek Vasut [Thu, 31 Mar 2022 15:05:01 +0000 (17:05 +0200)]
drm: bridge: icn6211: Add HS/VS/DE polarity handling
The driver currently hard-codes HS/VS polarity to active-low and DE to
active-high, which is not correct for a lot of supported DPI panels.
Add the missing mode flag handling for HS/VS/DE polarity.
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-4-marex@denx.de
Marek Vasut [Thu, 31 Mar 2022 15:05:00 +0000 (17:05 +0200)]
drm: bridge: icn6211: Fix HFP_HSW_HBP_HI and HFP_MIN handling
The HFP_HSW_HBP_HI register must be programmed with 2 LSbits of each
Horizontal Front Porch/Sync/Back Porch. Currently the driver programs
this register to 0, which breaks displays with either value above 255.
The HFP_MIN register must be set to the same value as HFP_LI, otherwise
there is visible image distortion, usually in the form of missing lines
at the bottom of the panel.
Fix this by correctly programming the HFP_HSW_HBP_HI and HFP_MIN registers.
Acked-by: Maxime Ripard <maxime@cerno.tech>
Fixes:
ce517f18944e3 ("drm: bridge: Add Chipone ICN6211 MIPI-DSI to RGB bridge")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-3-marex@denx.de
Marek Vasut [Thu, 31 Mar 2022 15:04:59 +0000 (17:04 +0200)]
drm: bridge: icn6211: Fix register layout
The chip register layout has nothing to do with MIPI DCS, the registers
incorrectly marked as MIPI DCS in the driver are regular chip registers
often with completely different function.
Fill in the actual register names and bits from [1] and [2] and add the
entire register layout, since the documentation for this chip is hard to
come by.
[1] https://github.com/rockchip-linux/kernel/blob/develop-4.19/drivers/gpu/drm/bridge/icn6211.c
[2] https://github.com/tdjastrzebski/ICN6211-Configurator
Acked-by: Maxime Ripard <maxime@cerno.tech>
Fixes:
ce517f18944e3 ("drm: bridge: Add Chipone ICN6211 MIPI-DSI to RGB bridge")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-2-marex@denx.de
Jagan Teki [Thu, 3 Mar 2022 16:36:54 +0000 (22:06 +0530)]
drm: exynos: dsi: Switch to atomic funcs
The new support drm bridges are moving towards atomic functions.
Replace atomic version of functions to continue the transition
to the atomic API.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303163654.3381470-7-jagan@amarulasolutions.com
Jagan Teki [Thu, 3 Mar 2022 16:36:53 +0000 (22:06 +0530)]
drm: exynos: dsi: Convert to bridge driver
Convert the encoders to bridge drivers in order to standardize on
a single API with built-in dumb encoder support for compatibility
with existing component drivers.
Driver bridge conversion will help to reuse the same bridge on
different platforms as exynos dsi driver can be used as a Samsung
DSIM and use it for i.MX8MM platform.
Bridge conversion,
- Drops drm_encoder_helper_funcs.
- Adds drm_bridge_funcs and register a drm bridge.
- Drops bridge_chain.
- Separate pre_enable from enable function.
- Separate post_disable from disable function.
Convert it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303163654.3381470-6-jagan@amarulasolutions.com
Jagan Teki [Thu, 3 Mar 2022 16:36:52 +0000 (22:06 +0530)]
drm: exynos: dsi: Use drm panel_bridge API
Replace the manual panel handling code by a drm panel_bridge via
devm_drm_of_get_bridge().
Adding panel_bridge handling,
- Drops drm_connector and related operations as drm_bridge_attach
creates connector during attachment.
- Drops panel pointer and iterate the bridge, so-that it can operate
the normal bridge and panel_bridge in constitutive callbacks.
This simplifies the driver and allows all components in the display
pipeline to be treated as bridges.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303163654.3381470-5-jagan@amarulasolutions.com
Jagan Teki [Thu, 3 Mar 2022 16:36:51 +0000 (22:06 +0530)]
exynos: drm: dsi: Attach in_bridge in MIC driver
MIC drivers in the Exynos5433 display pipeline are already registered
as bridge drivers and it is more advisable to attach the downstream
bridge on the bridge attach call instead of doing the same in the
DSI driver.
This makes bridge attachment more meaningful and avoids the races
during bridge function calls.
So, move the bridge finding and drm_bridge_attach from DSI to MIC.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303163654.3381470-4-jagan@amarulasolutions.com
Jagan Teki [Thu, 3 Mar 2022 16:36:50 +0000 (22:06 +0530)]
drm: bridge: panel: Reset the connector state pointer
Trigger hotplug event with drm_kms_helper_hotplug_event might fail if the
connector state pointer is NULL.
BUG observed in exynos dsi driver where drm_bridge_attach is trying to
register a connector in panel_bridge before the hotplug event is triggered.
WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/drm_atomic_state_helper.c:494 drm_atomic_helper_connector_duplicate_state+0x94/0x9c
Modules linked in:
CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 5.16.0-rc1-00009-g704b1dbfa4c2 #11058
Hardware name: Samsung Exynos (Flattened Device Tree)
[<
c0110b30>] (unwind_backtrace) from [<
c010c618>] (show_stack+0x10/0x14)
[<
c010c618>] (show_stack) from [<
c0b657d4>] (dump_stack_lvl+0x58/0x70)
[<
c0b657d4>] (dump_stack_lvl) from [<
c01261dc>] (__warn+0xd0/0x134)
[<
c01261dc>] (__warn) from [<
c0b5f628>] (warn_slowpath_fmt+0x5c/0xb4)
[<
c0b5f628>] (warn_slowpath_fmt) from [<
c064bce4>] (drm_atomic_helper_connector_duplicate_state+0x94/0x9c)
[<
c064bce4>] (drm_atomic_helper_connector_duplicate_state) from [<
c0666b64>] (drm_atomic_get_connector_state+0xd4/0x190)
[<
c0666b64>] (drm_atomic_get_connector_state) from [<
c0667928>] (__drm_atomic_helper_set_config+0x314/0x368)
[<
c0667928>] (__drm_atomic_helper_set_config) from [<
c067e628>] (drm_client_modeset_commit_atomic+0x170/0x278)
[<
c067e628>] (drm_client_modeset_commit_atomic) from [<
c067e800>] (drm_client_modeset_commit_locked+0x60/0x1c8)
[<
c067e800>] (drm_client_modeset_commit_locked) from [<
c067e98c>] (drm_client_modeset_commit+0x24/0x40)
[<
c067e98c>] (drm_client_modeset_commit) from [<
c06509c0>] (drm_fb_helper_set_par+0xb8/0xf8)
[<
c06509c0>] (drm_fb_helper_set_par) from [<
c05b86d0>] (fbcon_init+0x2c0/0x518)
[<
c05b86d0>] (fbcon_init) from [<
c060636c>] (visual_init+0xc0/0x108)
[<
c060636c>] (visual_init) from [<
c06085e4>] (do_bind_con_driver+0x1b8/0x3a4)
[<
c06085e4>] (do_bind_con_driver) from [<
c0608b40>] (do_take_over_console+0x13c/0x1e8)
[<
c0608b40>] (do_take_over_console) from [<
c05b6854>] (do_fbcon_takeover+0x78/0xd8)
[<
c05b6854>] (do_fbcon_takeover) from [<
c05b1154>] (register_framebuffer+0x208/0x2e0)
[<
c05b1154>] (register_framebuffer) from [<
c064ead0>] (__drm_fb_helper_initial_config_and_unlock+0x400/0x63c)
[<
c064ead0>] (__drm_fb_helper_initial_config_and_unlock) from [<
c063a718>] (drm_kms_helper_hotplug_event+0x24/0x30)
[<
c063a718>] (drm_kms_helper_hotplug_event) from [<
c068f668>] (exynos_dsi_host_attach+0x174/0x1fc)
[<
c068f668>] (exynos_dsi_host_attach) from [<
c0699354>] (s6e8aa0_probe+0x1b4/0x218)
So reset the atomic state for a given connector by freeing the state pointer
and allocate a new empty state object. This can be done using connector
funcs->reset helper and has to be done before the hotplug even calls.
This patch calls the connector->funcs->reset in panel_bridge_attach.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303163654.3381470-3-jagan@amarulasolutions.com
Jagan Teki [Thu, 3 Mar 2022 16:36:49 +0000 (22:06 +0530)]
drm: bridge: tc358764: Use drm panel_bridge API
Replace the manual panel handling code by a drm panel_bridge via
devm_drm_of_get_bridge().
Adding panel_bridge handling,
- Drops drm_connector and related operations as drm_bridge_attach
creates connector during attachment.
- Drops panel pointer and panel healpers.
This simplifies the driver and allows all components in the display
pipeline to be treated as bridges.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303163654.3381470-2-jagan@amarulasolutions.com
Marek Vasut [Tue, 29 Mar 2022 08:50:15 +0000 (10:50 +0200)]
drm/bridge: tc358767: Add DSI-to-DPI mode support
The TC358767/TC358867/TC9595 are all capable of operating in multiple
modes, DPI-to-(e)DP, DSI-to-(e)DP, DSI-to-DPI. Add support for the
DSI-to-DPI mode.
This requires skipping most of the (e)DP initialization code, which is
currently a large part of this driver, hence it is better to have far
simpler separate tc_dpi_bridge_funcs and their implementation.
The configuration of DPI output is also much simpler. The configuration
of the DSI input is rather similar to the other TC bridge chips.
The Pixel PLL in DPI output mode does not have the 65..150 MHz limitation
imposed on the (e)DP output mode, so this limitation is skipped to permit
operating panels with far slower pixel clock, even below 9 MHz. This mode
of operation of the PLL is valid and tested.
The detection of bridge mode is now added into tc_probe_bridge_mode(),
where in case a DPI panel is found on port@1 endpoint@1, the mode is
assumed to be DSI-to-DPI. If (e)DP is detected on port@2, the mode is
assumed to be DPI-to-(e)DP.
The DSI-to-(e)DP mode is not supported due to lack of proper hardware,
but this would be some sort of mix between the two aforementioned modes.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-12-marex@denx.de
Marek Vasut [Tue, 29 Mar 2022 08:50:14 +0000 (10:50 +0200)]
drm/bridge: tc358767: Split tc_set_video_mode() into common and (e)DP part
The tc_set_video_mode() sets up both common and (e)DP video mode settings of
the bridge chip. Split the function into tc_set_common_video_mode() to set
the common settings and tc_set_edp_video_mode() to set the (e)DP specific
settings. No functional change.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-11-marex@denx.de
Marek Vasut [Tue, 29 Mar 2022 08:50:13 +0000 (10:50 +0200)]
drm/bridge: tc358767: Detect bridge mode from connected endpoints in DT
The TC358767/TC358867/TC9595 are all capable of operating in multiple
modes, DPI-to-(e)DP, DSI-to-(e)DP, DSI-to-DPI. Only the first mode is
currently supported. It is possible to find out the mode in which the
bridge should be operated by testing connected endpoints in DT.
Port allocation:
port@0 - DSI input
port@1 - DPI input/output
port@2 - eDP output
Possible connections:
DPI -> port@1 -> port@2 -> eDP :: [port@0 is not connected]
DSI -> port@0 -> port@2 -> eDP :: [port@1 is not connected]
DSI -> port@0 -> port@1 -> DPI :: [port@2 is not connected]
Add function to determine the bridge mode based on connected endpoints.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-10-marex@denx.de
Marek Vasut [Tue, 29 Mar 2022 08:50:12 +0000 (10:50 +0200)]
drm/bridge: tc358767: Move bridge ops setup into tc_probe_edp_bridge_endpoint()
The bridge ops are specific to the bridge configuration, move them
into tc_probe_edp_bridge_endpoint() to permit cleaner addition of
DSI-to-DPI mode. No functional change.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-9-marex@denx.de
Marek Vasut [Tue, 29 Mar 2022 08:50:11 +0000 (10:50 +0200)]
drm/bridge: tc358767: Wrap (e)DP aux I2C registration into tc_aux_link_setup()
This bit of code is (e)DP and aux I2C link specific, move it into
tc_aux_link_setup() to permit cleaner addition of DSI-to-DPI mode.
No functional change.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-8-marex@denx.de
Marek Vasut [Tue, 29 Mar 2022 08:50:10 +0000 (10:50 +0200)]
drm/bridge: tc358767: Move (e)DP bridge endpoint parsing into dedicated function
The TC358767/TC358867/TC9595 are all capable of operating in multiple
modes, DPI-to-(e)DP, DSI-to-(e)DP, DSI-to-DPI. Only the first mode is
currently supported. In order to support the rest of the modes without
making the tc_probe() overly long, split the bridge endpoint parsing
into dedicated function, where the necessary logic to detect the bridge
mode based on which endpoints are connected, can be implemented.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-7-marex@denx.de
Marek Vasut [Tue, 29 Mar 2022 08:50:09 +0000 (10:50 +0200)]
drm/bridge: tc358767: Implement atomic_check callback
Implement .atomic_check callback which prevents user space from setting
unsupported mode. The tc_edp_common_atomic_check() variant is already
prepared for DSI-to-DPI mode addition, which has different frequency
limits.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-6-marex@denx.de
Marek Vasut [Tue, 29 Mar 2022 08:50:08 +0000 (10:50 +0200)]
drm/bridge: tc358767: Convert to atomic ops
Use the atomic version of the enable/disable operations to continue the
transition to the atomic API. This will be needed to access the mode
from the atomic state.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-5-marex@denx.de
Marek Vasut [Tue, 29 Mar 2022 08:50:07 +0000 (10:50 +0200)]
drm/bridge: tc358767: Change tc_ prefix to tc_edp_ for (e)DP specific functions
These functions are specific to (e)DP output initialization and
operation, add specific tc_edp_ prefix to those functions to
discern them from DPI output functions that will be added later
in this series. No functional change.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-4-marex@denx.de
Marek Vasut [Tue, 29 Mar 2022 08:50:06 +0000 (10:50 +0200)]
dt-bindings: display: bridge: tc358867: Document DSI data-lanes property
It is necessary to specify the number of connected/used DSI data lanes when
using the DSI input port of this bridge. Document the 'data-lanes' property
of the DSI input port.
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-3-marex@denx.de
Marek Vasut [Tue, 29 Mar 2022 08:50:05 +0000 (10:50 +0200)]
dt-bindings: display: bridge: tc358867: Document DPI output support
The TC358767/TC358867/TC9595 are all capable of operating in multiple
modes, DPI-to-(e)DP, DSI-to-(e)DP, DSI-to-DPI. Document support for the
DPI output port, which can now be connected both as input and output.
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-2-marex@denx.de
Lucas Stach [Mon, 21 Mar 2022 10:47:05 +0000 (11:47 +0100)]
drm/bridge: adv7511: clean up CEC adapter when probe fails
When the probe routine fails we also need to clean up the
CEC adapter registered in adv7511_cec_init().
Fixes:
3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321104705.2804423-1-l.stach@pengutronix.de
Yang Yingliang [Sat, 26 Mar 2022 07:33:26 +0000 (15:33 +0800)]
drm/bridge: anx7625: add missing destroy_workqueue() in anx7625_i2c_probe()
Add the missing destroy_workqueue() before return from
anx7625_i2c_probe() in the error handling case.
Fixes:
adca62ec370c ("drm/bridge: anx7625: Support reading edid through aux channel")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220326073326.3389347-1-yangyingliang@huawei.com
Jani Nikula [Wed, 30 Mar 2022 17:04:26 +0000 (20:04 +0300)]
drm/edid: fix invalid EDID extension block filtering
The invalid EDID block filtering uses the number of valid EDID
extensions instead of all EDID extensions for looping the extensions in
the copy. This is fine, by coincidence, if all the invalid blocks are at
the end of the EDID. However, it's completely broken if there are
invalid extensions in the middle; the invalid blocks are included and
valid blocks are excluded.
Fix it by modifying the base block after, not before, the copy.
Fixes:
14544d0937bf ("drm/edid: Only print the bad edid when aborting")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220330170426.349248-1-jani.nikula@intel.com
Maxime Ripard [Mon, 28 Mar 2022 12:43:04 +0000 (14:43 +0200)]
drm/vc4: Implement atomic_print_state for HVS channel state
The HVS state configuration is useful when debugging what's going on in
the vc4 hardware pipeline. Add an implementation of .atomic_print_state.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220328124304.2309418-5-maxime@cerno.tech
Maxime Ripard [Mon, 28 Mar 2022 12:43:03 +0000 (14:43 +0200)]
drm/vc4: Constify private state accessors
None of those helpers modify the pointed data, let's make them const.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220328124304.2309418-4-maxime@cerno.tech
Maxime Ripard [Mon, 28 Mar 2022 12:43:02 +0000 (14:43 +0200)]
drm/atomic: Add atomic_print_state to private objects
A number of drivers (amdgpu, komeda, vc4, etc.) leverage the
drm_private_state structure, but we don't have any infrastructure to
provide debugging like we do for the other components state. Let's add
an atomic_print_state hook to be consistent.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220328124304.2309418-3-maxime@cerno.tech
Maxime Ripard [Mon, 28 Mar 2022 12:43:01 +0000 (14:43 +0200)]
drm/atomic: Print the state every non-blocking commit
The DRM_UT_STATE controls whether we're calling
drm_atomic_print_new_state() whenever a new state is committed. However,
that call is made in the drm_mode_atomic_ioctl(), whereas we have
multiple users of the drm_atomic_commit() function in the kernel
(framebuffer emulation, drm_atomic_helper_dirtyfb, etc.).
This leads to multiple states being committed but never actually
displayed even though we asked to have verbose atomic state debugging.
Let's move the call to drm_atomic_print_new_state() to
drm_atomic_commit() to make sure we don't miss any. Non-blocking commits
were never logged though, and it would create too much churn in the logs
to do so, so leave them out for now.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220328124304.2309418-2-maxime@cerno.tech
Matthias Kaehlcke [Wed, 30 Mar 2022 16:04:44 +0000 (09:04 -0700)]
drm/panel-edp: Fix AUO B133UAN01 panel id
Two digits are swapped in the AUO B133UAN01 panel id (0x8495 instead
of 0x8594). This went initially unnoticed because the panel is still
detected, though it is set up with a conservative default timing. Fix
the digit swap.
Fixes:
ec57376fba5a ("drm/panel-edp: Add AUO B133UAN01")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220330090435.1.Id1522250dd07a6b574c1cc7826023fc6acd141b4@changeid
Matthias Kaehlcke [Thu, 24 Mar 2022 20:48:25 +0000 (13:48 -0700)]
drm/panel-edp: Add AUO B133UAN01
Add support for the AUO B133UAN01 13.3" WUXGA panel.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220324134819.v2.1.I816014b6c62da5a33af5021f3cc35cea66552c00@changeid
Jani Nikula [Mon, 28 Mar 2022 14:34:33 +0000 (17:34 +0300)]
drm/edid: split drm_add_edid_modes() to two
Reduce the size of the function that actually modifies the EDID.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/437c3c79f68d1144444fb2dd18a678f3aa97272c.1648477901.git.jani.nikula@intel.com
Jani Nikula [Mon, 28 Mar 2022 14:34:32 +0000 (17:34 +0300)]
drm/edid: add more general struct edid constness in the interfaces
With this, the remaining non-const parts are the ones that actually
modify the EDID, for example to fix corrupt EDID.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c7156f22494b585c55a00a6732462bde0cc19dbf.1648477901.git.jani.nikula@intel.com
Jani Nikula [Mon, 28 Mar 2022 14:34:31 +0000 (17:34 +0300)]
drm/edid: constify struct edid passed around in callbacks and closure
Finalize detailed timing parsing constness by making struct edid also
const in callbacks and closure.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8229be49b5a7686856c17428aa9291b4c4cf1bd5.1648477901.git.jani.nikula@intel.com
Jani Nikula [Mon, 28 Mar 2022 14:34:30 +0000 (17:34 +0300)]
drm/edid: constify struct edid passed to detailed blocks
Constify the first level of struct edid in detailed timing parsing. Also
switch to struct edid instead of u8.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ec7acb8a9ee0e2868bbb2afdfdd7db114ae180e1.1648477901.git.jani.nikula@intel.com
Jani Nikula [Mon, 28 Mar 2022 14:34:29 +0000 (17:34 +0300)]
drm/edid: constify struct detailed_timing in parsing callbacks
Moving one level higher, constify struct detailed_timing pointers in
callbacks.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9b617068d2349a574a837ad6207b1d45c4d79eb5.1648477901.git.jani.nikula@intel.com
Jani Nikula [Mon, 28 Mar 2022 14:34:28 +0000 (17:34 +0300)]
drm/edid: constify struct detailed_timing in lower level parsing
Start constifying the struct detailed_timing pointers being passed
around from bottom up.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0b7fafcc7784db0003e454544916c273a9eb1250.1648477901.git.jani.nikula@intel.com
Jani Nikula [Mon, 28 Mar 2022 14:34:27 +0000 (17:34 +0300)]
drm/edid: use struct detailed_timing member access in gtf2 functions
Use struct detailed_timing member access instead of direct offsets to
avoid casting.
Use BUILD_BUG_ON() for sanity check.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9fe5f5c39039e585fecfffb390297d49262e5fd3.1648477901.git.jani.nikula@intel.com
Jani Nikula [Mon, 28 Mar 2022 14:34:26 +0000 (17:34 +0300)]
drm/edid: use struct detailed_timing member access in is_rb()
Use struct detailed_timing member access instead of direct offsets to
avoid casting.
Use BUILD_BUG_ON() for sanity check.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c069669c2fe8f9c3061c7d1a413c75a33ec48813.1648477901.git.jani.nikula@intel.com
Jani Nikula [Mon, 28 Mar 2022 14:34:25 +0000 (17:34 +0300)]
drm/edid: pass a timing pointer to is_detailed_timing_descriptor()
Use struct member access instead of direct offsets to avoid a cast.
Use BUILD_BUG_ON() for sanity check.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0b5213383e14f11c6a505b10a7342fb2ff4f2a11.1648477901.git.jani.nikula@intel.com
Jani Nikula [Mon, 28 Mar 2022 14:34:24 +0000 (17:34 +0300)]
drm/edid: pass a timing pointer to is_display_descriptor()
Use struct member access instead of direct offsets to avoid lots of
casts all over the place.
Use BUILD_BUG_ON() for sanity check.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ccc54b45ea628874c0290dd64114da6cefff1819.1648477901.git.jani.nikula@intel.com
Jani Nikula [Mon, 28 Mar 2022 14:34:23 +0000 (17:34 +0300)]
drm/edid: fix reduced blanking support check
The reduced blanking bit is valid only for CVT, indicated by display
range limits flags 0x04.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5dea5ee24065450716bbc177dd6850d3193dbeec.1648477901.git.jani.nikula@intel.com
Jani Nikula [Mon, 28 Mar 2022 14:34:22 +0000 (17:34 +0300)]
drm/edid: don't modify EDID while parsing
We'll want to keep the EDID immutable while parsing. Stop modifying the
EDID because of the quirks.
In theory, this does have userspace implications, but the userspace is
supposed to use the modes exposed via KMS API, not by parsing the EDID
directly.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/45d5cf067eaad49b321ac82836090d9de524374e.1648477901.git.jani.nikula@intel.com
Xiaomeng Tong [Sun, 27 Mar 2022 06:15:16 +0000 (14:15 +0800)]
tilcdc: tilcdc_external: fix an incorrect NULL check on list iterator
The bug is here:
if (!encoder) {
The list iterator value 'encoder' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
is found.
To fix the bug, use a new variable 'iter' as the list iterator,
while use the original variable 'encoder' as a dedicated pointer
to point to the found element.
Cc: stable@vger.kernel.org
Fixes:
ec9eab097a500 ("drm/tilcdc: Add drm bridge support for attaching drm bridge drivers")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Tested-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20220327061516.5076-1-xiam0nd.tong@gmail.com
Xiaomeng Tong [Sun, 27 Mar 2022 05:20:28 +0000 (13:20 +0800)]
gma500: fix an incorrect NULL check on list iterator
The bug is here:
return crtc;
The list iterator value 'crtc' will *always* be set and non-NULL by
list_for_each_entry(), so it is incorrect to assume that the iterator
value will be NULL if the list is empty or no element is found.
To fix the bug, return 'crtc' when found, otherwise return NULL.
Cc: stable@vger.kernel.org
fixes:
89c78134cc54d ("gma500: Add Poulsbo support")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220327052028.2013-1-xiam0nd.tong@gmail.com
Christian König [Fri, 16 Jul 2021 12:37:14 +0000 (14:37 +0200)]
drm/amdgpu: drop amdgpu_gtt_node
We have the BO pointer in the base structure now as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321132601.2161-6-christian.koenig@amd.com
Christian König [Mon, 24 Jan 2022 10:07:15 +0000 (11:07 +0100)]
drm/ttm: rework bulk move handling v5
Instead of providing the bulk move structure for each LRU update set
this as property of the BO. This should avoid costly bulk move rebuilds
with some games under RADV.
v2: some name polishing, add a few more kerneldoc words.
v3: add some lockdep
v4: fix bugs, handle pin/unpin as well
v5: improve kerneldoc
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321132601.2161-5-christian.koenig@amd.com
Christian König [Tue, 15 Feb 2022 16:29:59 +0000 (17:29 +0100)]
drm/ttm: de-inline ttm_bo_pin/unpin
Those functions are going to become more complex, don't inline them any
more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321132601.2161-4-christian.koenig@amd.com
Xiaomeng Tong [Sun, 27 Mar 2022 07:39:25 +0000 (15:39 +0800)]
drm/nouveau/kms/nv50-: atom: fix an incorrect NULL check on list iterator
The bug is here:
return encoder;
The list iterator value 'encoder' will *always* be set and non-NULL
by drm_for_each_encoder_mask(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element found.
Otherwise it will bypass some NULL checks and lead to invalid memory
access passing the check.
To fix this bug, just return 'encoder' when found, otherwise return
NULL.
Cc: stable@vger.kernel.org
Fixes:
12885ecbfe62d ("drm/nouveau/kms/nvd9-: Add CRC support")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[Changed commit title]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220327073925.11121-1-xiam0nd.tong@gmail.com
Christian König [Mon, 24 Jan 2022 08:37:43 +0000 (09:37 +0100)]
drm/ttm: allow bulk moves for all domains
Not just TT and VRAM.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321132601.2161-3-christian.koenig@amd.com
Christian König [Tue, 8 Jun 2021 09:13:21 +0000 (11:13 +0200)]
drm/ttm: add resource iterator v4
Instead of duplicating that at different places add an iterator over all
the resources in a resource manager.
v2: add lockdep annotation and kerneldoc
v3: fix various bugs pointed out by Felix
v4: simplify the code a bit more
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v2)
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321132601.2161-2-christian.koenig@amd.com
Christian König [Fri, 16 Jul 2021 12:00:10 +0000 (14:00 +0200)]
drm/ttm: move the LRU into resource handling v4
This way we finally fix the problem that new resource are
not immediately evict-able after allocation.
That has caused numerous problems including OOM on GDS handling
and not being able to use TTM as general resource manager.
v2: stop assuming in ttm_resource_fini that res->bo is still valid.
v3: cleanup kerneldoc, add more lockdep annotation
v4: consistently use res->num_pages
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321132601.2161-1-christian.koenig@amd.com
Andrey Grodzovsky [Mon, 28 Mar 2022 13:25:32 +0000 (09:25 -0400)]
drm/sched: Fix htmldoc warning.
Fixes the warning.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220328132532.406572-1-andrey.grodzovsky@amd.com
Xin Ji [Tue, 22 Mar 2022 08:02:12 +0000 (16:02 +0800)]
drm/bridge: anx7625: Set downstream sink into normal status
As downstream sink was set into standby mode while bridge disabled,
this patch used for setting downstream sink into normal status
while enable bridge.
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Reviewed-by: Pin-Yen Lin <treapking@chromium.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322080213.1487134-1-xji@analogixsemi.com
Ivaylo Dimitrov [Wed, 19 Jan 2022 10:23:11 +0000 (12:23 +0200)]
drm: omapdrm: Do no allocate non-scanout GEMs through DMM/TILER
On devices with DMM, all allocations are done through either DMM or TILER.
DMM/TILER being a limited resource means that such allocations will start
to fail before actual free memory is exhausted. What is even worse is that
with time DMM/TILER space gets fragmented to the point that even if we have
enough free DMM/TILER space and free memory, allocation fails because there
is no big enough free block in DMM/TILER space.
Such failures can be easily observed with OMAP xorg DDX, for example -
starting few GUI applications (so buffers for their windows are allocated)
and then rotating landscape<->portrait while closing and opening new
windows soon results in allocation failures.
Fix that by mapping buffers through DMM/TILER only when really needed,
like, for scanout buffers.
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1642587791-13222-4-git-send-email-ivo.g.dimitrov.75@gmail.com
Ivaylo Dimitrov [Wed, 19 Jan 2022 10:23:10 +0000 (12:23 +0200)]
drm: omapdrm: Support exporting of non-contiguous GEM BOs
Currently code allocates non-scanout BOs from SHMEM and those objects are
accessible to userspace by mmap(). However, on devices with no DMM (like
OMAP3), the same objects are not accessible by kernel drivers that want to
render to them as code refuses to export them. In turn this means that on
devices with no DMM, all buffers must be allocated as scanout, otherwise
only CPU can access them. On those devices, scanout buffers are allocated
from CMA, making those allocations highly unreliable.
Fix that by implementing functionality to export SHMEM backed buffers on
devices with no DMM. This makes CMA memory only being used when needed,
instead for every buffer that has to be off-CPU rendered.
Tested on Motorola Droid4 and Nokia N900
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1642587791-13222-3-git-send-email-ivo.g.dimitrov.75@gmail.com
Ivaylo Dimitrov [Wed, 19 Jan 2022 10:23:09 +0000 (12:23 +0200)]
drm: omapdrm: simplify omap_gem_pin
Move tiler related code to its own function.
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1642587791-13222-2-git-send-email-ivo.g.dimitrov.75@gmail.com
Cong Liu [Thu, 24 Mar 2022 10:49:28 +0000 (18:49 +0800)]
drm/qxl: fix qxl can't use in arm64
qxl use ioremap to map ram_header and rom, in the arm64 implementation,
the device is mapped as DEVICE_nGnRE, it can not support unaligned
access. and qxl is a virtual device, it can be treated more like RAM
than actual MMIO registers. use ioremap_wc() replace it.
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Acked-by: Christian König <christian.koenig@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220324104928.2959545-1-liucong2@kylinos.cn
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Rob Clark [Sat, 19 Feb 2022 17:03:01 +0000 (09:03 -0800)]
drm/virtio: Remove restriction of non-zero blob_flags
With native userspace drivers in guest, a lot of GEM objects need to be
neither shared nor mappable. And in fact making everything mappable
and/or sharable results in unreasonably high fd usage in host VMM.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220219170301.545432-1-robdclark@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Liu Zixian [Tue, 22 Mar 2022 09:17:30 +0000 (17:17 +0800)]
drm/virtio: fix NULL pointer dereference in virtio_gpu_conn_get_modes
drm_cvt_mode may return NULL and we should check it.
This bug is found by syzkaller:
FAULT_INJECTION stacktrace:
[ 168.567394] FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 1
[ 168.567403] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1
[ 168.567406] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[ 168.567408] Call trace:
[ 168.567414] dump_backtrace+0x0/0x310
[ 168.567418] show_stack+0x28/0x38
[ 168.567423] dump_stack+0xec/0x15c
[ 168.567427] should_fail+0x3ac/0x3d0
[ 168.567437] __should_failslab+0xb8/0x120
[ 168.567441] should_failslab+0x28/0xc0
[ 168.567445] kmem_cache_alloc_trace+0x50/0x640
[ 168.567454] drm_mode_create+0x40/0x90
[ 168.567458] drm_cvt_mode+0x48/0xc78
[ 168.567477] virtio_gpu_conn_get_modes+0xa8/0x140 [virtio_gpu]
[ 168.567485] drm_helper_probe_single_connector_modes+0x3a4/0xd80
[ 168.567492] drm_mode_getconnector+0x2e0/0xa70
[ 168.567496] drm_ioctl_kernel+0x11c/0x1d8
[ 168.567514] drm_ioctl+0x558/0x6d0
[ 168.567522] do_vfs_ioctl+0x160/0xf30
[ 168.567525] ksys_ioctl+0x98/0xd8
[ 168.567530] __arm64_sys_ioctl+0x50/0xc8
[ 168.567536] el0_svc_common+0xc8/0x320
[ 168.567540] el0_svc_handler+0xf8/0x160
[ 168.567544] el0_svc+0x10/0x218
KASAN stacktrace:
[ 168.567561] BUG: KASAN: null-ptr-deref in virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu]
[ 168.567565] Read of size 4 at addr
0000000000000054 by task syz/6425
[ 168.567566]
[ 168.567571] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1
[ 168.567573] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[ 168.567575] Call trace:
[ 168.567578] dump_backtrace+0x0/0x310
[ 168.567582] show_stack+0x28/0x38
[ 168.567586] dump_stack+0xec/0x15c
[ 168.567591] kasan_report+0x244/0x2f0
[ 168.567594] __asan_load4+0x58/0xb0
[ 168.567607] virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu]
[ 168.567612] drm_helper_probe_single_connector_modes+0x3a4/0xd80
[ 168.567617] drm_mode_getconnector+0x2e0/0xa70
[ 168.567621] drm_ioctl_kernel+0x11c/0x1d8
[ 168.567624] drm_ioctl+0x558/0x6d0
[ 168.567628] do_vfs_ioctl+0x160/0xf30
[ 168.567632] ksys_ioctl+0x98/0xd8
[ 168.567636] __arm64_sys_ioctl+0x50/0xc8
[ 168.567641] el0_svc_common+0xc8/0x320
[ 168.567645] el0_svc_handler+0xf8/0x160
[ 168.567649] el0_svc+0x10/0x218
Signed-off-by: Liu Zixian <liuzixian4@huawei.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220322091730.1653-1-liuzixian4@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Maxime Ripard [Tue, 22 Feb 2022 16:40:42 +0000 (17:40 +0100)]
drm/vc4: hdmi: Support HDMI YUV output
In addition to the RGB444 output, the BCM2711 HDMI controller supports
the YUV444 and YUV422 output formats.
Let's add support for them in the driver, but still use RGB as the
preferred format.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-8-maxime@cerno.tech
Maxime Ripard [Tue, 22 Feb 2022 16:40:41 +0000 (17:40 +0100)]
drm/vc4: hdmi: Always try to have the highest bpc
Currently we take the max_bpc property as the bpc value and do not try
anything else.
However, what the other drivers seem to be doing is that they would try
with the highest bpc allowed by the max_bpc property and the hardware
capabilities, test if it results in an acceptable configuration, and if
not decrease the bpc and try again.
Let's use the same logic.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-7-maxime@cerno.tech
Maxime Ripard [Tue, 22 Feb 2022 16:40:40 +0000 (17:40 +0100)]
drm/vc4: hdmi: Take bpp into account for the scrambler
The current code only base its decision for whether the scrambler must be
enabled or not on the pixel clock of the mode, but doesn't take the bits
per color into account.
Let's leverage the new function to compute the clock rate in the
scrambler setup code.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-6-maxime@cerno.tech
Maxime Ripard [Tue, 22 Feb 2022 16:40:39 +0000 (17:40 +0100)]
drm/vc4: hdmi: Take the sink maximum TMDS clock into account
In the function that validates that the clock isn't too high, we've only
taken our controller limitations into account so far.
However, the sink can have a limit on the maximum TMDS clock it can deal
with too which is exposed through the EDID and the drm_display_info.
Make sure we check it.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-5-maxime@cerno.tech
Maxime Ripard [Tue, 22 Feb 2022 16:40:38 +0000 (17:40 +0100)]
drm/vc4: hdmi: Move clock calculation into its own function
The code to compute our clock rate for a given setup will be called in
multiple places in the next patches, so let's create a separate function
for it.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-4-maxime@cerno.tech
Maxime Ripard [Tue, 22 Feb 2022 16:40:37 +0000 (17:40 +0100)]
drm/vc4: hdmi: Move clock validation to its own function
Our code is doing the same clock rate validation in multiple instances.
Let's create a helper to share the rate validation.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-3-maxime@cerno.tech
Maxime Ripard [Tue, 22 Feb 2022 16:40:36 +0000 (17:40 +0100)]
drm/vc4: hdmi: Rename pixel_rate variable
The pixel_rate field in the vc4_hdmi_connector_state struct actually
stores the TMDS character rate, let's rename it for consistency.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-2-maxime@cerno.tech
YueHaibing [Thu, 17 Mar 2022 09:47:24 +0000 (17:47 +0800)]
drm/bridge: it6505: Fix build error
If DRM_ITE_IT6505 is y but DRM_DP_HELPER is m, building failed:
drivers/gpu/drm/bridge/ite-it6505.o: In function `it6505_i2c_remove':
ite-it6505.c:(.text+0x35c): undefined reference to `drm_dp_aux_unregister'
drivers/gpu/drm/bridge/ite-it6505.o: In function `it6505_dpcd_read':
ite-it6505.c:(.text+0x420): undefined reference to `drm_dp_dpcd_read'
drivers/gpu/drm/bridge/ite-it6505.o: In function `it6505_get_dpcd':
ite-it6505.c:(.text+0x4a4): undefined reference to `drm_dp_dpcd_read'
drivers/gpu/drm/bridge/ite-it6505.o: In function `it6505_dpcd_write':
ite-it6505.c:(.text+0x52c): undefined reference to `drm_dp_dpcd_write'
Select DRM_DP_HELPER for DRM_ITE_IT6505 to fix this.
Fixes:
b5c84a9edcd4 ("drm/bridge: add it6505 driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317094724.25972-1-yuehaibing@huawei.com
Christian König [Fri, 24 Sep 2021 12:19:22 +0000 (14:19 +0200)]
dma-buf: finally make the dma_resv_list private v2
Drivers should never touch this directly.
v2: drop kerneldoc for now internal handling
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-2-christian.koenig@amd.com
Christian König [Fri, 24 Sep 2021 08:55:45 +0000 (10:55 +0200)]
dma-buf: add dma_resv_replace_fences v2
This function allows to replace fences from the shared fence list when
we can gurantee that the operation represented by the original fence has
finished or no accesses to the resources protected by the dma_resv
object any more when the new fence finishes.
Then use this function in the amdkfd code when BOs are unmapped from the
process.
v2: add an example when this is usefull.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-1-christian.koenig@amd.com
Christian König [Wed, 22 Sep 2021 11:01:04 +0000 (13:01 +0200)]
RDMA: use dma_resv_wait() instead of extracting the fence
Use dma_resv_wait() instead of extracting the exclusive fence and
waiting on it manually.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Maor Gottlieb <maorg@nvidia.com>
Cc: Gal Pressman <galpress@amazon.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-4-christian.koenig@amd.com
Christian König [Wed, 3 Nov 2021 08:34:29 +0000 (09:34 +0100)]
drm/etnaviv: stop using dma_resv_excl_fence v2
We can get the excl fence together with the shared ones as well.
v2: rename the member to fences as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: etnaviv@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-5-christian.koenig@amd.com
Nicolas Belin [Wed, 16 Mar 2022 13:57:33 +0000 (14:57 +0100)]
drm: bridge: it66121: Add audio support
Adding the audio support on the HDMI bridge for I2S only.
Signed-off-by: Nicolas Belin <nbelin@baylibre.com>
Signed-off-by: Andy.Hsieh <Andy.Hsieh@mediatek.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220316135733.173950-4-nbelin@baylibre.com
Nicolas Belin [Wed, 16 Mar 2022 13:57:32 +0000 (14:57 +0100)]
drm: bridge: it66121: Fix the register page length
Set the register page length or window length to
0x100 according to the documentation.
Fixes:
988156dc2fc9 ("drm: bridge: add it66121 driver")
Signed-off-by: Nicolas Belin <nbelin@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220316135733.173950-3-nbelin@baylibre.com
Nicolas Belin [Wed, 16 Mar 2022 13:57:31 +0000 (14:57 +0100)]
dt-bindings: display: bridge: it66121: Add audio support
Update the ITE bridge HDMI it66121 bindings in order to
support audio.
Signed-off-by: Nicolas Belin <nbelin@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220316135733.173950-2-nbelin@baylibre.com
Patrik Jakobsson [Tue, 22 Mar 2022 13:17:42 +0000 (14:17 +0100)]
drm/gma500: Add crtc prefix to vblank functions
These functions operate on a crtc and should be prefixed properly.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322131742.11566-7-patrik.r.jakobsson@gmail.com
Patrik Jakobsson [Tue, 22 Mar 2022 13:17:41 +0000 (14:17 +0100)]
drm/gma500: Declare a few functions static
These functions are not used outside of their file scope so can be
declared as static.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322131742.11566-6-patrik.r.jakobsson@gmail.com
Patrik Jakobsson [Tue, 22 Mar 2022 13:17:40 +0000 (14:17 +0100)]
drm/gma500: Free the correct connector allocation
The allocation is made for the gma_connector object so we must use the
same address when free()ing the object.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322131742.11566-5-patrik.r.jakobsson@gmail.com
Patrik Jakobsson [Tue, 22 Mar 2022 13:17:39 +0000 (14:17 +0100)]
drm/gma500: gma500 don't register non-hotpluggable connectors
According to docs we should only register connectors that are
hotpluggable. No connectors in gma500 are hotpluggable.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322131742.11566-4-patrik.r.jakobsson@gmail.com
Patrik Jakobsson [Tue, 22 Mar 2022 13:17:38 +0000 (14:17 +0100)]
drm/gma500: Make use of the drm connector iterator
This makes sure we're using proper locking when iterating the list of
connectors.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322131742.11566-3-patrik.r.jakobsson@gmail.com
Patrik Jakobsson [Tue, 22 Mar 2022 13:17:37 +0000 (14:17 +0100)]
drm/gma500: Uninstall interrupts on driver removal
Reloading the driver revealed that the interrupt handler never got
uninstalled.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322131742.11566-2-patrik.r.jakobsson@gmail.com
Patrik Jakobsson [Tue, 22 Mar 2022 13:17:36 +0000 (14:17 +0100)]
drm/gma500: Use managed drmm_mode_config_init()
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322131742.11566-1-patrik.r.jakobsson@gmail.com
Ville Syrjälä [Fri, 18 Feb 2022 10:03:57 +0000 (12:03 +0200)]
drm/tilcdc: Use drm_mode_copy()
struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.
Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.
Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.
@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}
@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)
@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)
@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode
Cc: Jyri Sarha <jyri.sarha@iki.fi>
Cc: Tomi Valkeinen <tomba@kernel.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-17-ville.syrjala@linux.intel.com
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Ville Syrjälä [Fri, 18 Feb 2022 10:03:48 +0000 (12:03 +0200)]
drm/gma500: Use drm_mode_copy()
struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.
Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.
Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.
@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}
@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)
@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)
@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-8-ville.syrjala@linux.intel.com
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Zack Rusin [Fri, 18 Mar 2022 17:43:31 +0000 (13:43 -0400)]
drm/vmwgfx: Disable command buffers on svga3 without gbobjects
With very limited vram on svga3 it's difficult to handle all the surface
migrations. Without gbobjects, i.e. the ability to store surfaces in
guest mobs, there's no reason to support intermediate svga2 features,
especially because we can fall back to fb traces and svga3 will never
support those in-between features.
On svga3 we wither want to use fb traces or screen targets
(i.e. gbobjects), nothing in between. This fixes presentation on a lot
of fusion/esxi tech previews where the exposed svga3 caps haven't been
finalized yet.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes:
2cd80dbd3551 ("drm/vmwgfx: Add basic support for SVGA3")
Cc: <stable@vger.kernel.org> # v5.14+
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-5-zack@kde.org
Zack Rusin [Fri, 18 Mar 2022 17:43:30 +0000 (13:43 -0400)]
drm/vmwgfx: validate the screen formats
The kms code wasn't validating the modifiers and was letting through
unsupported formats. rgb8 was never properly supported and has no
matching svga screen target format so remove it.
This fixes format/modifier failures in kms_addfb_basic from IGT.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-4-zack@kde.org
Zack Rusin [Fri, 18 Mar 2022 17:43:29 +0000 (13:43 -0400)]
drm/vmwgfx: Fix mob cursor allocation race
Writes to SVGA_REG_CURSOR_MOBID did not wait for the buffers to be fully
populated. This sometimes results in the device not being aware of
the buffer when the cursor mob register was written.
Properly wait for the buffer to be fully populated before setting it
as a cursor mob.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes:
485d98d472d5 ("drm/vmwgfx: Add support for CursorMob and CursorBypass 4")
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-3-zack@kde.org
Zack Rusin [Fri, 18 Mar 2022 17:43:28 +0000 (13:43 -0400)]
drm/vmwgfx: Fix an invalid read
vmw_move assumed that buffers to be moved would always be
vmw_buffer_object's but after introduction of new placement for mob
pages that's no longer the case.
The resulting invalid read didn't have any practical consequences
because the memory isn't used unless the object actually is a
vmw_buffer_object.
Fix it by moving the cast to the spot where the results are used.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes:
f6be23264bba ("drm/vmwgfx: Introduce a new placement for MOB page tables")
Reported-by: Chuck Lever III <chuck.lever@oracle.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-2-zack@kde.org
Chuansheng Liu [Fri, 18 Mar 2022 00:50:03 +0000 (08:50 +0800)]
fbdev: defio: fix the pagelist corruption
Easily hit the below list corruption:
==
list_add corruption. prev->next should be next (
ffffffffc0ceb090), but
was
ffffec604507edc8. (prev=
ffffec604507edc8).
WARNING: CPU: 65 PID: 3959 at lib/list_debug.c:26
__list_add_valid+0x53/0x80
CPU: 65 PID: 3959 Comm: fbdev Tainted: G U
RIP: 0010:__list_add_valid+0x53/0x80
Call Trace:
<TASK>
fb_deferred_io_mkwrite+0xea/0x150
do_page_mkwrite+0x57/0xc0
do_wp_page+0x278/0x2f0
__handle_mm_fault+0xdc2/0x1590
handle_mm_fault+0xdd/0x2c0
do_user_addr_fault+0x1d3/0x650
exc_page_fault+0x77/0x180
? asm_exc_page_fault+0x8/0x30
asm_exc_page_fault+0x1e/0x30
RIP: 0033:0x7fd98fc8fad1
==
Figure out the race happens when one process is adding &page->lru into
the pagelist tail in fb_deferred_io_mkwrite(), another process is
re-initializing the same &page->lru in fb_deferred_io_fault(), which is
not protected by the lock.
This fix is to init all the page lists one time during initialization,
it not only fixes the list corruption, but also avoids INIT_LIST_HEAD()
redundantly.
V2: change "int i" to "unsigned int i" (Geert Uytterhoeven)
Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Fixes:
105a940416fc ("fbdev/defio: Early-out if page is already enlisted")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318005003.51810-1-chuansheng.liu@intel.com
Sankeerth Billakanti [Wed, 16 Mar 2022 17:35:49 +0000 (23:05 +0530)]
drm/panel-edp: add LQ140M1JW46 edp panel entry
Add panel identification entry for the sharp LQ140M1JW46 eDP panel
with power sequencing delay information.
Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1647452154-16361-5-git-send-email-quic_sbillaka@quicinc.com
Christophe Branchereau [Fri, 11 Mar 2022 17:02:40 +0000 (18:02 +0100)]
dt-bindings: display/panel: Add Leadtek ltk035c5444t
Add binding for the leadtek ltk035c5444t, which is a 640x480
mipi-dbi over spi / 24-bit RGB panel based on the newvision
NV03052C chipset.
It is found in the Anbernic RG350M mips handheld.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311170240.173846-5-cbranchereau@gmail.com
Thomas Zimmermann [Sun, 13 Mar 2022 19:29:52 +0000 (20:29 +0100)]
fbdev: Fix cfb_imageblit() for arbitrary image widths
Commit
0d03011894d2 ("fbdev: Improve performance of cfb_imageblit()")
broke cfb_imageblit() for image widths that are not aligned to 8-bit
boundaries. Fix this by handling the trailing pixels on each line
separately. The performance improvements in the original commit do not
regress by this change.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes:
0d03011894d2 ("fbdev: Improve performance of cfb_imageblit()")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220313192952.12058-3-tzimmermann@suse.de
Thomas Zimmermann [Sun, 13 Mar 2022 19:29:51 +0000 (20:29 +0100)]
fbdev: Fix sys_imageblit() for arbitrary image widths
Commit
6f29e04938bf ("fbdev: Improve performance of sys_imageblit()")
broke sys_imageblit() for image width that are not aligned to 8-bit
boundaries. Fix this by handling the trailing pixels on each line
separately. The performance improvements in the original commit do not
regress by this change.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes:
6f29e04938bf ("fbdev: Improve performance of sys_imageblit()")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220313192952.12058-2-tzimmermann@suse.de
Patrik Jakobsson [Thu, 17 Mar 2022 09:25:55 +0000 (10:25 +0100)]
drm/gma500: Cosmetic cleanup of irq code
Use the gma_ prefix instead of psb_ since the code is common for all
chips. Various coding style fixes. Removal of unused code. Removal of
duplicate function declarations.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317092555.17882-4-patrik.r.jakobsson@gmail.com
Patrik Jakobsson [Thu, 17 Mar 2022 09:25:54 +0000 (10:25 +0100)]
drm/gma500: Don't store crtc_funcs in psb_ops
The drm_crtc_funcs are all generic and no chip specific functions are
necessary. We can therefore directly put gma_crtc_funcs into the
drm_crtc.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317092555.17882-3-patrik.r.jakobsson@gmail.com
projects / platform / kernel / linux-starfive.git / log