staging: comedi: daqboard2000: bug fix board type matching code

[ Upstream commit 80e162ee9b31d77d851b10f8c5299132be1e120f ]

`daqboard2000_find_boardinfo()` is supposed to check if the
DaqBoard/2000 series model is supported, based on the PCI subvendor and
subdevice ID.  The current code is wrong as it is comparing the PCI
device's subdevice ID to an expected, fixed value for the subvendor ID.
It should be comparing the PCI device's subvendor ID to this fixed
value.  Correct it.

Fixes: 7e8401b23e7f ("staging: comedi: daqboard2000: add back
subsystem_device check")
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: <stable@vger.kernel.org> # 3.7+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

USB: serial: option: add WeTelecom WM-D200

[ Upstream commit 6695593e4a7659db49ac6eca98c164f7b5589f72 ]

Add support for WeTelecom WM-D200.

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=22de ProdID=6801 Rev=00.00
S:  Manufacturer=WeTelecom Incorporated
S:  Product=WeTelecom Mobile Products
C:  #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

Signed-off-by: Aleksandr Makarov <aleksandr.o.makarov@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

usb: chipidea: udc: don't touch DP when controller is in host mode

[ Upstream commit c4e94174983a86c935be1537a73e496b778b0287 ]

When the controller is configured to be dual role and it's in host mode,
if bind udc and gadgt driver, those gadget operations will do gadget
disconnect and finally pull down DP line, which will break host function.

Cc: <stable@vger.kernel.org> # 4.1+
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

USB: serial: mos7840: fix non-atomic allocation in write path

[ Upstream commit 3b7c7e52efda0d4640060de747768360ba70a7c0 ]

There is an allocation with GFP_KERNEL flag in mos7840_write(),
while it may be called from interrupt context.

Follow-up for commit 191252837626 ("USB: kobil_sct: fix non-atomic
allocation in write path")

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

USB: serial: mos7720: fix non-atomic allocation in write path

[ Upstream commit 5a5a1d614287a647b36dff3f40c2b0ceabbc83ec ]

There is an allocation with GFP_KERNEL flag in mos7720_write(),
while it may be called from interrupt context.

Follow-up for commit 191252837626 ("USB: kobil_sct: fix non-atomic
allocation in write path")

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

cpuset: make sure new tasks conform to the current config of the cpuset

[ Upstream commit 06f4e94898918bcad00cdd4d349313a439d6911e ]

A new task inherits cpus_allowed and mems_allowed masks from its parent,
but if someone changes cpuset's config by writing to cpuset.cpus/cpuset.mems
before this new task is inserted into the cgroup's task list, the new task
won't be updated accordingly.

Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

ovl: don't copy up opaqueness

[ Upstream commit 0956254a2d5b9e2141385514553aeef694dfe3b5 ]

When a copy up of a directory occurs which has the opaque xattr set, the
xattr remains in the upper directory. The immediate behavior with overlayfs
is that the upper directory is not treated as opaque, however after a
remount the opaque flag is used and upper directory is treated as opaque.
This causes files created in the lower layer to be hidden when using
multiple lower directories.

Fix by not copying up the opaque flag.

To reproduce:

 ----8<---------8<---------8<---------8<---------8<---------8<----
mkdir -p l/d/s u v w mnt
mount -t overlay overlay -olowerdir=l,upperdir=u,workdir=w mnt
rm -rf mnt/d/
mkdir -p mnt/d/n
umount mnt
mount -t overlay overlay -olowerdir=u:l,upperdir=v,workdir=w mnt
touch mnt/d/foo
umount mnt
mount -t overlay overlay -olowerdir=u:l,upperdir=v,workdir=w mnt
ls mnt/d
 ----8<---------8<---------8<---------8<---------8<---------8<----

output should be:  "foo  n"

Reported-by: Derek McGowan <dmcg@drizz.net>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=151291
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

dmaengine: usb-dmac: check CHCR.DE bit in usb_dmac_isr_channel()

[ Upstream commit 626d2f07de89bf6be3d7301524d0ab3375b81b9c ]

The USB-DMAC's interruption happens even if the CHCR.DE is not set to 1
because CHCR.NULLE is set to 1. So, this driver should call
usb_dmac_isr_transfer_end() if the DE bit is set to 1 only. Otherwise,
the desc is possible to be NULL in the usb_dmac_isr_transfer_end().

Fixes: 0c1c8ff32fa2 ("dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver)
Cc: <stable@vger.kernel.org> # v4.1+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

ext4: validate that metadata blocks do not overlap superblock

[ Upstream commit 829fa70dddadf9dd041d62b82cd7cea63943899d ]

A number of fuzzing failures seem to be caused by allocation bitmaps
or other metadata blocks being pointed at the superblock.

This can cause kernel BUG or WARNings once the superblock is
overwritten, so validate the group descriptor blocks to make sure this
doesn't happen.

Cc: stable@vger.kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[PATCH] arm: fix handling of F_OFD_... in oabi_fcntl64()

[ Upstream commit 76cc404bfdc0d419c720de4daaf2584542734f42 ]

Cc: stable@vger.kernel.org # 3.15+
Reviewed-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

staging: comedi: comedi_test: fix timer race conditions

[ commit 403fe7f34e3327ddac2e06a15e76a293d613381e upstream.

  Patch is cut down a bit from upstream patch, as upstream patch fixed
  parts that don't exist in this version.  Also, some identifiers were
  renamed, so patch description has been edited accordingly
  -- Ian Abbott
]

Commit 73e0e4dfed4c ("staging: comedi: comedi_test: fix timer lock-up")
fixed a lock-up in the timer routine `waveform_ai_interrupt()` caused by
commit 240512474424 ("staging: comedi: comedi_test: use
comedi_handle_events()").  However, it introduced a race condition that
can result in the timer routine misbehaving, such as accessing freed
memory or dereferencing a NULL pointer.

73e0... changed the timer routine to do nothing unless a
`WAVEFORM_AI_RUNNING` flag was set, and changed `waveform_ai_cancel()`
to clear the flag and replace a call to `del_timer_sync()` with a call
to `del_timer()`.  `waveform_ai_cancel()` may be called from the timer
routine itself (via `comedi_handle_events()`), or from `do_cancel()`.
(`do_cancel()` is called as a result of a file operation (usually a
`COMEDI_CANCEL` ioctl command, or a release), or during device removal.)
When called from `do_cancel()`, the call to `waveform_ai_cancel()` is
followed by a call to `do_become_nonbusy()`, which frees up stuff for
the current asynchronous command under the assumption that it is now
safe to do so.  The race condition occurs when the timer routine
`waveform_ai_interrupt()` checks the `WAVEFORM_AI_RUNNING` flag just
before it is cleared by `waveform_ai_cancel()`, and is still running
during the call to `do_become_nonbusy()`.  In particular, it can lead to
a NULL pointer dereference because `do_become_nonbusy()` frees
`async->cmd.chanlist` and sets it to `NULL`, but
`waveform_ai_interrupt()` dereferences it.

Fix the race by calling `del_timer_sync()` instead of `del_timer()` in
`waveform_ai_cancel()` when not in an interrupt context.  The only time
`waveform_ai_cancel()` is called in an interrupt context is when it is
called from the timer routine itself, via `comedi_handle_events()`.

There is no longer any need for the `WAVEFORM_AI_RUNNING` flag, so get
rid of it.

Fixes: 73e0e4dfed4c ("staging: comedi: comedi_test: fix timer lock-up")
Reported-by: Éric Piel <piel@delmic.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Éric Piel <piel@delmic.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

Linux 4.1.32

Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

PCI: Limit config space size for Netronome NFP4000

[ Upstream commit c2e771b02792d222cbcd9617fe71482a64f52647 ]

Like the NFP6000, the NFP4000 as an erratum where reading/writing to PCI
config space addresses above 0x600 can cause the NFP to generate PCIe
completion timeouts.

Limit the NFP4000's PF's config space size to 0x600 bytes as is already
done for the NFP6000.

The NFP4000's VF is 0x6004 (PCI_DEVICE_ID_NETRONOME_NFP6000_VF), the same
device ID as the NFP6000's VF.  Thus, its config space is already limited
by the existing use of quirk_nfp6000().

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

PCI: Add Netronome NFP4000 PF device ID

[ Upstream commit 69874ec233871a62e1bc8c89e643993af93a8630 ]

Add the device ID for the PF of the NFP4000.  The device ID for the VF,
0x6003, is already present as PCI_DEVICE_ID_NETRONOME_NFP6000_VF.

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

PCI: Limit config space size for Netronome NFP6000 family

[ Upstream commit 9f33a2ae59f24452c1076749deb615bccd435ca9 ]

The NFP6000 has an erratum where reading/writing to PCI config space
addresses above 0x600 can cause the NFP to generate PCIe completion
timeouts.

Limit the NFP6000's config space size to 0x600 bytes.

Signed-off-by: Jason S. McMullan <jason.mcmullan@netronome.com>
[simon: edited changelog]
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

PCI: Add Netronome vendor and device IDs

[ Upstream commit a755e169031dac9ebaed03302c4921687c271d62 ]

Device IDs for the Netronome NFP3200, NFP3240, NFP6000, and NFP6000 SR-IOV
devices.

Signed-off-by: Jason S. McMullan <jason.mcmullan@netronome.com>
[simon: edited changelog]
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

PCI: Support PCIe devices with short cfg_size

[ Upstream commit c20aecf6963d1273d8f6d61c042b4845441ca592 ]

If a device quirk modifies the pci_dev->cfg_size to be less than
PCI_CFG_SPACE_EXP_SIZE (4096), but greater than PCI_CFG_SPACE_SIZE (256),
the PCI sysfs interface truncates the readable size to PCI_CFG_SPACE_SIZE.

Allow sysfs access to config space up to cfg_size, even if the device
doesn't support the entire 4096-byte PCIe config space.

Note that pci_read_config() and pci_write_config() limit access to
dev->cfg_size even though pcie_config_attr contains 4096 (the maximum
size).

Signed-off-by: Jason S. McMullan <jason.mcmullan@netronome.com>
[simon: edited changelog]
Signed-off-by: Simon Horman <simon.horman@netronome.com>
[bhelgaas: more changelog edits]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

fs/seq_file: fix out-of-bounds read

[ Upstream commit 088bf2ff5d12e2e32ee52a4024fec26e582f44d3 ]

seq_read() is a nasty piece of work, not to mention buggy.

It has (I think) an old bug which allows unprivileged userspace to read
beyond the end of m->buf.

I was getting these:

    BUG: KASAN: slab-out-of-bounds in seq_read+0xcd2/0x1480 at addr ffff880116889880
    Read of size 2713 by task trinity-c2/1329
    CPU: 2 PID: 1329 Comm: trinity-c2 Not tainted 4.8.0-rc1+ #96
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
    Call Trace:
      kasan_object_err+0x1c/0x80
      kasan_report_error+0x2cb/0x7e0
      kasan_report+0x4e/0x80
      check_memory_region+0x13e/0x1a0
      kasan_check_read+0x11/0x20
      seq_read+0xcd2/0x1480
      proc_reg_read+0x10b/0x260
      do_loop_readv_writev.part.5+0x140/0x2c0
      do_readv_writev+0x589/0x860
      vfs_readv+0x7b/0xd0
      do_readv+0xd8/0x2c0
      SyS_readv+0xb/0x10
      do_syscall_64+0x1b3/0x4b0
      entry_SYSCALL64_slow_path+0x25/0x25
    Object at ffff880116889100, in cache kmalloc-4096 size: 4096
    Allocated:
    PID = 1329
      save_stack_trace+0x26/0x80
      save_stack+0x46/0xd0
      kasan_kmalloc+0xad/0xe0
      __kmalloc+0x1aa/0x4a0
      seq_buf_alloc+0x35/0x40
      seq_read+0x7d8/0x1480
      proc_reg_read+0x10b/0x260
      do_loop_readv_writev.part.5+0x140/0x2c0
      do_readv_writev+0x589/0x860
      vfs_readv+0x7b/0xd0
      do_readv+0xd8/0x2c0
      SyS_readv+0xb/0x10
      do_syscall_64+0x1b3/0x4b0
      return_from_SYSCALL_64+0x0/0x6a
    Freed:
    PID = 0
    (stack is not available)
    Memory state around the buggy address:
     ffff88011688a000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
     ffff88011688a080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    >ffff88011688a100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
       ^
     ffff88011688a180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
     ffff88011688a200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
    ==================================================================
    Disabling lock debugging due to kernel taint

This seems to be the same thing that Dave Jones was seeing here:

  https://lkml.org/lkml/2016/8/12/334

There are multiple issues here:

  1) If we enter the function with a non-empty buffer, there is an attempt
     to flush it. But it was not clearing m->from after doing so, which
     means that if we try to do this flush twice in a row without any call
     to traverse() in between, we are going to be reading from the wrong
     place -- the splat above, fixed by this patch.

  2) If there's a short write to userspace because of page faults, the
     buffer may already contain multiple lines (i.e. pos has advanced by
     more than 1), but we don't save the progress that was made so the
     next call will output what we've already returned previously. Since
     that is a much less serious issue (and I have a headache after
     staring at seq_read() for the past 8 hours), I'll leave that for now.

Link: http://lkml.kernel.org/r/1471447270-32093-1-git-send-email-vegard.nossum@oracle.com
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

clocksource/drivers/sun4i: Clear interrupts after stopping timer in probe function

[ Upstream commit b53e7d000d9e6e9fd2c6eb6b82d2783c67fd599e ]

The bootloader (U-boot) sometimes uses this timer for various delays.
It uses it as a ongoing counter, and does comparisons on the current
counter value. The timer counter is never stopped.

In some cases when the user interacts with the bootloader, or lets
it idle for some time before loading Linux, the timer may expire,
and an interrupt will be pending. This results in an unexpected
interrupt when the timer interrupt is enabled by the kernel, at
which point the event_handler isn't set yet. This results in a NULL
pointer dereference exception, panic, and no way to reboot.

Clear any pending interrupts after we stop the timer in the probe
function to avoid this.

Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

dm flakey: fix reads to be issued if drop_writes configured

[ Upstream commit 299f6230bc6d0ccd5f95bb0fb865d80a9c7d5ccc ]

v4.8-rc3 commit 99f3c90d0d ("dm flakey: error READ bios during the
down_interval") overlooked the 'drop_writes' feature, which is meant to
allow reads to be issued rather than errored, during the down_interval.

Fixes: 99f3c90d0d ("dm flakey: error READ bios during the down_interval")
Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

xenbus: don't look up transaction IDs for ordinary writes

[ Upstream commit 9a035a40f7f3f6708b79224b86c5777a3334f7ea ]

This should really only be done for XS_TRANSACTION_END messages, or
else at least some of the xenstore-* tools don't work anymore.

Fixes: 0beef634b8 ("xenbus: don't BUG() on user mode induced condition")
Reported-by: Richard Schütz <rschuetz@uni-koblenz.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Richard Schütz <rschuetz@uni-koblenz.de>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

x86/apic: Do not init irq remapping if ioapic is disabled

[ Upstream commit 2e63ad4bd5dd583871e6602f9d398b9322d358d9 ]

native_smp_prepare_cpus
  -> default_setup_apic_routing
    -> enable_IR_x2apic
      -> irq_remapping_prepare
        -> intel_prepare_irq_remapping
          -> intel_setup_irq_remapping

So IR table is setup even if "noapic" boot parameter is added. As a result we
crash later when the interrupt affinity is set due to a half initialized
remapping infrastructure.

Prevent remap initialization when IOAPIC is disabled.

Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Link: http://lkml.kernel.org/r/1471954039-3942-1-git-send-email-wanpeng.li@hotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

timekeeping: Cap array access in timekeeping_debug

[ Upstream commit a4f8f6667f099036c88f231dcad4cf233652c824 ]

It was reported that hibernation could fail on the 2nd attempt, where the
system hangs at hibernate() -> syscore_resume() -> i8237A_resume() ->
claim_dma_lock(), because the lock has already been taken.

However there is actually no other process would like to grab this lock on
that problematic platform.

Further investigation showed that the problem is triggered by setting
/sys/power/pm_trace to 1 before the 1st hibernation.

Since once pm_trace is enabled, the rtc becomes unmeaningful after suspend,
and meanwhile some BIOSes would like to adjust the 'invalid' RTC (e.g, smaller
than 1970) to the release date of that motherboard during POST stage, thus
after resumed, it may seem that the system had a significant long sleep time
which is a completely meaningless value.

Then in timekeeping_resume -> tk_debug_account_sleep_time, if the bit31 of the
sleep time happened to be set to 1, fls() returns 32 and we add 1 to
sleep_time_bin[32], which causes an out of bounds array access and therefor
memory being overwritten.

As depicted by System.map:
0xffffffff81c9d080 b sleep_time_bin
0xffffffff81c9d100 B dma_spin_lock
the dma_spin_lock.val is set to 1, which caused this problem.

This patch adds a sanity check in tk_debug_account_sleep_time()
to ensure we don't index past the sleep_time_bin array.

[jstultz: Problem diagnosed and original patch by Chen Yu, I've solved the
 issue slightly differently, but borrowed his excelent explanation of the
 issue here.]

Fixes: 5c83545f24ab "power: Add option to log time spent in suspend"
Reported-by: Janek Kozicki <cosurgi@gmail.com>
Reported-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: linux-pm@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xunlei Pang <xpang@redhat.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: stable <stable@vger.kernel.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: http://lkml.kernel.org/r/1471993702-29148-3-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

timekeeping: Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING

[ Upstream commit 27727df240c7cc84f2ba6047c6f18d5addfd25ef ]

When I added some extra sanity checking in timekeeping_get_ns() under
CONFIG_DEBUG_TIMEKEEPING, I missed that the NMI safe __ktime_get_fast_ns()
method was using timekeeping_get_ns().

Thus the locking added to the debug checks broke the NMI-safety of
__ktime_get_fast_ns().

This patch open-codes the timekeeping_get_ns() logic for
__ktime_get_fast_ns(), so can avoid any deadlocks in NMI.

Fixes: 4ca22c2648f9 "timekeeping: Add warnings when overflows or underflows are observed"
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: stable <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1471993702-29148-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

um: Don't discard .text.exit section

[ Upstream commit dad2232844073295c64e9cc2d734a0ade043e0f6 ]

Commit e41f501d3912 ("vmlinux.lds: account for destructor sections")
added '.text.exit' to EXIT_TEXT which is discarded at link time by default.
This breaks compilation of UML:
     `.text.exit' referenced in section `.fini_array' of
     /usr/lib/gcc/x86_64-linux-gnu/6/../../../x86_64-linux-gnu/libc.a(sdlerror.o):
     defined in discarded section `.text.exit' of
     /usr/lib/gcc/x86_64-linux-gnu/6/../../../x86_64-linux-gnu/libc.a(sdlerror.o)

Apparently UML doesn't want to discard exit text, so let's place all EXIT_TEXT
sections in .exit.text.

Fixes: e41f501d3912 ("vmlinux.lds: account for destructor sections")
Reported-by: Stefan Traby <stefan@hello-penguin.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

ubifs: Fix assertion in layout_in_gaps()

[ Upstream commit c0082e985fdf77b02fc9e0dac3b58504dcf11b7a ]

An assertion in layout_in_gaps() verifies that the gap_lebs pointer is
below the maximum bound. When computing this maximum bound the idx_lebs
count is multiplied by sizeof(int), while C pointers arithmetic does take
into account the size of the pointed elements implicitly already. Remove
the multiplication to fix the assertion.

Fixes: 1e51764a3c2ac05a ("UBIFS: add new flash file system")
Cc: <stable@vger.kernel.org>
Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

vhost/scsi: fix reuse of &vq->iov[out] in response

[ Upstream commit a77ec83a57890240c546df00ca5df1cdeedb1cc3 ]

The address of the iovec &vq->iov[out] is not guaranteed to contain the scsi
command's response iovec throughout the lifetime of the command.  Rather, it
is more likely to contain an iovec from an immediately following command
after looping back around to vhost_get_vq_desc().  Pass along the iovec
entirely instead.

Fixes: 79c14141a487 ("vhost/scsi: Convert completion path to use copy_to_iter")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

Input: tegra-kbc - fix inverted reset logic

[ Upstream commit fae16989be77b09bab86c79233e4b511ea769cea ]

Commit fe6b0dfaba68 ("Input: tegra-kbc - use reset framework")
accidentally converted _deassert to _assert, so there is no code
to wake up this hardware.

Fixes: fe6b0dfaba68 ("Input: tegra-kbc - use reset framework")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

ALSA: line6: Fix POD sysfs attributes segfault

[ Upstream commit b027d11263836a0cd335520175257dcb99b43757 ]

The commit 02fc76f6a changed base of the sysfs attributes from device to card.
The "show" callbacks dereferenced wrong objects because of this.

Fixes: 02fc76f6a7db ('ALSA: line6: Create sysfs via snd_card_add_dev_attr()')
Cc: <stable@vger.kernel.org> # v4.0+
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Andrej Krutak <dev@andree.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

ALSA: line6: Give up on the lock while URBs are released.

[ Upstream commit adc8a43a6d6688272ebffa81789fa857e603dec6 ]

Done, because line6_stream_stop() locks and calls line6_unlink_audio_urbs(),
which in turn invokes audio_out_callback(), which tries to lock 2nd time.

Fixes:

=============================================
[ INFO: possible recursive locking detected ]
4.4.15+ #15 Not tainted
---------------------------------------------
mplayer/3591 is trying to acquire lock:
 (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa27655>] audio_out_callback+0x70/0x110 [snd_usb_line6]

but task is already holding lock:
 (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa26aad>] line6_stream_stop+0x24/0x5c [snd_usb_line6]

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&line6pcm->out.lock)->rlock);
  lock(&(&line6pcm->out.lock)->rlock);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

3 locks held by mplayer/3591:
 #0:  (snd_pcm_link_rwlock){.-.-..}, at: [<bf8d49a7>] snd_pcm_stream_lock+0x1e/0x40 [snd_pcm]
 #1:  (&(&substream->self_group.lock)->rlock){-.-...}, at: [<bf8d49af>] snd_pcm_stream_lock+0x26/0x40 [snd_pcm]
 #2:  (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa26aad>] line6_stream_stop+0x24/0x5c [snd_usb_line6]

stack backtrace:
CPU: 0 PID: 3591 Comm: mplayer Not tainted 4.4.15+ #15
Hardware name: Generic AM33XX (Flattened Device Tree)
[<c0015d85>] (unwind_backtrace) from [<c001253d>] (show_stack+0x11/0x14)
[<c001253d>] (show_stack) from [<c02f1bdf>] (dump_stack+0x8b/0xac)
[<c02f1bdf>] (dump_stack) from [<c0076f43>] (__lock_acquire+0xc8b/0x1780)
[<c0076f43>] (__lock_acquire) from [<c007810d>] (lock_acquire+0x99/0x1c0)
[<c007810d>] (lock_acquire) from [<c06171e7>] (_raw_spin_lock_irqsave+0x3f/0x4c)
[<c06171e7>] (_raw_spin_lock_irqsave) from [<bfa27655>] (audio_out_callback+0x70/0x110 [snd_usb_line6])
[<bfa27655>] (audio_out_callback [snd_usb_line6]) from [<c04294db>] (__usb_hcd_giveback_urb+0x53/0xd0)
[<c04294db>] (__usb_hcd_giveback_urb) from [<c046388d>] (musb_giveback+0x3d/0x98)
[<c046388d>] (musb_giveback) from [<c04647f5>] (musb_urb_dequeue+0x6d/0x114)
[<c04647f5>] (musb_urb_dequeue) from [<c042ac11>] (usb_hcd_unlink_urb+0x39/0x98)
[<c042ac11>] (usb_hcd_unlink_urb) from [<bfa26a87>] (line6_unlink_audio_urbs+0x6a/0x6c [snd_usb_line6])
[<bfa26a87>] (line6_unlink_audio_urbs [snd_usb_line6]) from [<bfa26acb>] (line6_stream_stop+0x42/0x5c [snd_usb_line6])
[<bfa26acb>] (line6_stream_stop [snd_usb_line6]) from [<bfa26fe7>] (snd_line6_trigger+0xb6/0xf4 [snd_usb_line6])
[<bfa26fe7>] (snd_line6_trigger [snd_usb_line6]) from [<bf8d47b7>] (snd_pcm_do_stop+0x36/0x38 [snd_pcm])
[<bf8d47b7>] (snd_pcm_do_stop [snd_pcm]) from [<bf8d462f>] (snd_pcm_action_single+0x22/0x40 [snd_pcm])
[<bf8d462f>] (snd_pcm_action_single [snd_pcm]) from [<bf8d46f9>] (snd_pcm_action+0xac/0xb0 [snd_pcm])
[<bf8d46f9>] (snd_pcm_action [snd_pcm]) from [<bf8d4b61>] (snd_pcm_drop+0x38/0x64 [snd_pcm])
[<bf8d4b61>] (snd_pcm_drop [snd_pcm]) from [<bf8d6233>] (snd_pcm_common_ioctl1+0x7fe/0xbe8 [snd_pcm])
[<bf8d6233>] (snd_pcm_common_ioctl1 [snd_pcm]) from [<bf8d6779>] (snd_pcm_playback_ioctl1+0x15c/0x51c [snd_pcm])
[<bf8d6779>] (snd_pcm_playback_ioctl1 [snd_pcm]) from [<bf8d6b59>] (snd_pcm_playback_ioctl+0x20/0x28 [snd_pcm])
[<bf8d6b59>] (snd_pcm_playback_ioctl [snd_pcm]) from [<c016714b>] (do_vfs_ioctl+0x3af/0x5c8)

Fixes: 63e20df1e5b2 ('ALSA: line6: Reorganize PCM stream handling')
Cc: <stable@vger.kernel.org> # v4.0+
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Andrej Krutak <dev@andree.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

ALSA: line6: Remove double line6_pcm_release() after failed acquire.

[ Upstream commit 7e4379eae0e31994ea645db1d13006ea8e5ce539 ]

If there's an error, pcm is released in line6_pcm_acquire already.

Fixes: 247d95ee6dd2 ('ALSA: line6: Handle error from line6_pcm_acquire()')
Cc: <stable@vger.kernel.org> # v4.0+
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Andrej Krutak <dev@andree.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

drm: Reject page_flip for !DRIVER_MODESET

[ Upstream commit 6f00975c619064a18c23fd3aced325ae165a73b9 ]

Somehow this one slipped through, which means drivers without modeset
support can be oopsed (since those also don't call
drm_mode_config_init, which means the crtc lookup will chase an
uninitalized idr).

Reported-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

parisc: Fix order of EREFUSED define in errno.h

[ Upstream commit 3eb53b20d7bd1374598cfb1feaa081fcac0e76cd ]

When building gccgo in userspace, errno.h gets parsed and the go include file
sysinfo.go is generated.

Since EREFUSED is defined to the same value as ECONNREFUSED, and ECONNREFUSED
is defined later on in errno.h, this leads to go complaining that EREFUSED
isn't defined yet.

Fix this trivial problem by moving the define of EREFUSED down after
ECONNREFUSED in errno.h (and clean up the indenting while touching this line).

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

ARC: export __udivdi3 for modules

[ Upstream commit c57653dc94d0db7bf63067433ceaa97bdcd0a312 ]

Some module using div_u64() was failing to link because the libgcc 64-bit
divide assist routine was not being exported for modules

Reported-by: avinashp@quantenna.com
Cc: stable@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

ARC: Support syscall ABI v4

[ Upstream commit 840c054fd0efb048df6fceb0c46385ec5b66dfe6 ]

The syscall ABI includes the gcc functional calling ABI since a syscall
implies userland caller and kernel callee.

The current gcc ABI (v3) for ARCv2 ISA required 64-bit data be passed in
even-odd register pairs, (potentially punching reg holes when passing such
values as args). This was partly driven by the fact that the double-word
LDD/STD instructions in ARCv2 expect the register alignment and thus gcc
forcing this avoids extra MOV at the cost of a few unused register (which we
have plenty anyways).

This however was rejected as part of upstreaming gcc port to HS. So the new
ABI v4 doesn't enforce the even-odd reg restriction.

Do note that for ARCompact ISA builds v3 and v4 are practically the same in
terms of gcc code generation.

In terms of change management, we infer the new ABI if gcc 6.x onwards
is used for building the kernel.

This also needs a stable backport to enable older kernels to work with
new tools/user-space

Cc: <stable@vger.kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

ARC: use correct offset in pt_regs for saving/restoring user mode r25

[ Upstream commit 86147e3cfa5e118b61e78f4f0bf29e920dcbd477 ]

User mode callee regs are explicitly collected before signal delivery or
breakpoint trap. r25 is special for kernel as it serves as task pointer,
so user mode value is clobbered very early. It is saved in pt_regs where
generally only scratch (aka caller saved) regs are saved.

The code to access the corresponding pt_regs location had a subtle bug as
it was using load/store with scaling of offset, whereas the offset was already
byte wise correct. So fix this by replacing LD.AS with a standard LD

Cc: <stable@vger.kernel.org>
Signed-off-by: Liav Rehana <liavr@mellanox.com>
Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com>
[vgupta: rewrote title and commit log]
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

ARCv2: STAR 9000808988: signals involving Delay Slot

[ Upstream commit 0d7b8855a05c099a5c65a8d49a1e604198021f56 ]

Reported by Anton as LTP:munmap01 failing with Illegal Instruction
Exception.

   --------------------->8--------------------------------------
   mmap2(NULL, 24576, PROT_READ|PROT_WRITE, MAP_SHARED, 3, 0) = 0x200d2000
   munmap(0x200d2000, 24576)               = 0
   --- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_addr=0x200d2000}
   ---
   potentially unexpected fatal signal 4.
   Path: /munmap01
   CPU: 0 PID: 61 Comm: munmap01 Not tainted 3.13.0-g5d5c46d9a556 #8
   task: 9f1a8000 ti: 9f154000 task.ti: 9f154000

   [ECR   ]: 0x00020100 => Illegal Insn
   [EFA   ]: 0x0001354c
   [BLINK ]: 0x200515d4
   [ERET  ]: 0x1354c
       @off 0x1354c in [/munmap01]
       VMA: 0x00010000 to 0x00018000
   [STAT32]: 0x800802c0
   ...
   --------------------->8--------------------------------------

The issue was
1. munmap01 accessed unmapped memory (on purpose) with signal handler
   installed for SIGSEGV

2. The faulting instruction happened to be in Delay Slot
   00011864 <main>:
      11908: bl.d       13284 <tst_resm>
      1190c: stb        r16,[r2]

3. kernel sets up the reg file for signal handler and correctly clears
   the DE bit in pt_regs->status32 placeholder

4. However RESTORE_CALLEE_SAVED_USER macro is not adjusted for ARCv2,
   and it over-writes the above with orig/stale value of status32

5. After RTIE, userspace signal handler executes a non branch
   instruction with DE bit set, triggering Illegal Instruction Exception.

Reported-by: Anton Kolesov <akolesov@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

Input: i8042 - set up shared ps2_cmd_mutex for AUX ports

[ Upstream commit 47af45d684b5f3ae000ad448db02ce4f13f73273 ]

The commit 4097461897df ("Input: i8042 - break load dependency ...")
correctly set up ps2_cmd_mutex pointer for the KBD port but forgot to do
the same for AUX port(s), which results in communication on KBD and AUX
ports to clash with each other.

Fixes: 4097461897df ("Input: i8042 - break load dependency ...")
Reported-by: Bruno Wolff III <bruno@wolff.to>
Tested-by: Bruno Wolff III <bruno@wolff.to>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

drm/radeon: fix radeon_move_blit on 32bit systems

[ Upstream commit 13f479b9df4e2bbf2d16e7e1b02f3f55f70e2455 ]

This bug seems to be present for a very long time.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

gpio: Fix OF build problem on UM

[ Upstream commit 2527ecc9195e9c66252af24c4689e8a67cd4ccb9 ]

The UserMode (UM) Linux build was failing in gpiolib-of as it requires
ioremap()/iounmap() to exist, which is absent from UM. The non-existence
of IO memory is negatively defined as CONFIG_NO_IOMEM which means we
need to depend on HAS_IOMEM.

Cc: stable@vger.kernel.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

bcache: RESERVE_PRIO is too small by one when prio_buckets() is a power of two.

[ Upstream commit acc9cf8c66c66b2cbbdb4a375537edee72be64df ]

This patch fixes a cachedev registration-time allocation deadlock.
This can deadlock on boot if your initrd auto-registeres bcache devices:

Allocator thread:
[  720.727614] INFO: task bcache_allocato:3833 blocked for more than 120 seconds.
[  720.732361]  [<ffffffff816eeac7>] schedule+0x37/0x90
[  720.732963]  [<ffffffffa05192b8>] bch_bucket_alloc+0x188/0x360 [bcache]
[  720.733538]  [<ffffffff810e6950>] ? prepare_to_wait_event+0xf0/0xf0
[  720.734137]  [<ffffffffa05302bd>] bch_prio_write+0x19d/0x340 [bcache]
[  720.734715]  [<ffffffffa05190bf>] bch_allocator_thread+0x3ff/0x470 [bcache]
[  720.735311]  [<ffffffff816ee41c>] ? __schedule+0x2dc/0x950
[  720.735884]  [<ffffffffa0518cc0>] ? invalidate_buckets+0x980/0x980 [bcache]

Registration thread:
[  720.710403] INFO: task bash:3531 blocked for more than 120 seconds.
[  720.715226]  [<ffffffff816eeac7>] schedule+0x37/0x90
[  720.715805]  [<ffffffffa05235cd>] __bch_btree_map_nodes+0x12d/0x150 [bcache]
[  720.716409]  [<ffffffffa0522d30>] ? bch_btree_insert_check_key+0x1c0/0x1c0 [bcache]
[  720.717008]  [<ffffffffa05236e4>] bch_btree_insert+0xf4/0x170 [bcache]
[  720.717586]  [<ffffffff810e6950>] ? prepare_to_wait_event+0xf0/0xf0
[  720.718191]  [<ffffffffa0527d9a>] bch_journal_replay+0x14a/0x290 [bcache]
[  720.718766]  [<ffffffff810cc90d>] ? ttwu_do_activate.constprop.94+0x5d/0x70
[  720.719369]  [<ffffffff810cf684>] ? try_to_wake_up+0x1d4/0x350
[  720.719968]  [<ffffffffa05317d0>] run_cache_set+0x580/0x8e0 [bcache]
[  720.720553]  [<ffffffffa053302e>] register_bcache+0xe2e/0x13b0 [bcache]
[  720.721153]  [<ffffffff81354cef>] kobj_attr_store+0xf/0x20
[  720.721730]  [<ffffffff812a2dad>] sysfs_kf_write+0x3d/0x50
[  720.722327]  [<ffffffff812a225a>] kernfs_fop_write+0x12a/0x180
[  720.722904]  [<ffffffff81225177>] __vfs_write+0x37/0x110
[  720.723503]  [<ffffffff81228048>] ? __sb_start_write+0x58/0x110
[  720.724100]  [<ffffffff812cedb3>] ? security_file_permission+0x23/0xa0
[  720.724675]  [<ffffffff812258a9>] vfs_write+0xa9/0x1b0
[  720.725275]  [<ffffffff8102479c>] ? do_audit_syscall_entry+0x6c/0x70
[  720.725849]  [<ffffffff81226755>] SyS_write+0x55/0xd0
[  720.726451]  [<ffffffff8106a390>] ? do_page_fault+0x30/0x80
[  720.727045]  [<ffffffff816f2cae>] system_call_fastpath+0x12/0x71

The fifo code in upstream bcache can't use the last element in the buffer,
which was the cause of the bug: if you asked for a power of two size,
it'd give you a fifo that could hold one less than what you asked for
rather than allocating a buffer twice as big.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Tested-by: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

bcache: register_bcache(): call blkdev_put() when cache_alloc() fails

[ Upstream commit d9dc1702b297ec4a6bb9c0326a70641b322ba886 ]

register_cache() is supposed to return an error string on error so that
register_bcache() will will blkdev_put and cleanup other user counters,
but it does not set 'char *err' when cache_alloc() fails (eg, due to
memory pressure) and thus register_bcache() performs no cleanup.

register_bcache() <----------\  <- no jump to err_close, no blkdev_put()
   |                         |
   +->register_cache()       |  <- fails to set char *err
         |                   |
         +->cache_alloc() ---/  <- returns error

This patch sets `char *err` for this failure case so that register_cache()
will cause register_bcache() to correctly jump to err_close and do
cleanup.  This was tested under OOM conditions that triggered the bug.

Signed-off-by: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

drm/radeon: only apply the SS fractional workaround to RS[78]80

[ Upstream commit ae5b80d2b68eac945b124227dea34462118a6f01 ]

Looks like some RV6xx have problems with that.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=97099

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

drm/radeon: don't use fractional dividers on RS[78]80 if SS is enabled

[ Upstream commit 9ef8537e68941d858924a3eacee5a1945767cbab ]

Seems to cause problems for some older hardware. Kudos to Thom Kouwenhoven
for working a lot with the PLLs and figuring this out.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

uprobes: Fix the memcg accounting

[ Upstream commit 6c4687cc17a788a6dd8de3e27dbeabb7cbd3e066 ]

__replace_page() wronlgy calls mem_cgroup_cancel_charge() in "success" path,
it should only do this if page_check_address() fails.

This means that every enable/disable leads to unbalanced mem_cgroup_uncharge()
from put_page(old_page), it is trivial to underflow the page_counter->count
and trigger OOM.

Reported-and-tested-by: Brenden Blanco <bblanco@plumgrid.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: stable@vger.kernel.org # 3.17+
Fixes: 00501b531c47 ("mm: memcontrol: rewrite charge API")
Link: http://lkml.kernel.org/r/20160817153629.GB29724@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

block: Fix race triggered by blk_set_queue_dying()

[ Upstream commit 1b856086813be9371929b6cc62045f9fd470f5a0 ]

blk_set_queue_dying() can be called while another thread is
submitting I/O or changing queue flags, e.g. through dm_stop_queue().
Hence protect the QUEUE_FLAG_DYING flag change with locking.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

ASoC: atmel_ssc_dai: Don't unconditionally reset SSC on stream startup

[ Upstream commit 3e103a65514c2947e53f3171b21255fbde8b60c6 ]

commit cbaadf0f90d6 ("ASoC: atmel_ssc_dai: refactor the startup and
shutdown") refactored code such that the SSC is reset on every
startup; this breaks duplex audio (e.g. first start audio playback,
then start record, causing the playback to stop/hang)

Fixes: cbaadf0f90d6 (ASoC: atmel_ssc_dai: refactor the startup and shutdown)
Signed-off-by: Christoph Huber <c.huber@bct-electronic.com>
Signed-off-by: Peter Meerwald-Stadler <p.meerwald@bct-electronic.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

ARC: Elide redundant setup of DMA callbacks

[ Upstream commit 45c3b08a117e2232fc8d7b9e849ead36386f4f96 ]

For resources shared by all cores such as SLC and IOC, only the master
core needs to do any setups / enabling / disabling etc.

Cc: <stable@vger.kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

ARC: Call trace_hardirqs_on() before enabling irqs

[ Upstream commit 18b43e89d295cc65151c505c643c98fb2c320e59 ]

trace_hardirqs_on_caller() in lockdep.c expects to be called before, not
after interrupts are actually enabled.

The following comment in kernel/locking/lockdep.c substantiates this
claim:

"
/*
 * We're enabling irqs and according to our state above irqs weren't
 * already enabled, yet we find the hardware thinks they are in fact
 * enabled.. someone messed up their IRQ state tracing.
 */
"

An example can be found in include/linux/irqflags.h:

do { trace_hardirqs_on(); raw_local_irq_enable(); } while (0)

Without this change, we hit the following DEBUG_LOCKS_WARN_ON.

[    7.760000] ------------[ cut here ]------------
[    7.760000] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2711 resume_user_mode_begin+0x48/0xf0
[    7.770000] DEBUG_LOCKS_WARN_ON(!irqs_disabled())
[    7.780000] Modules linked in:
[    7.780000] CPU: 0 PID: 1 Comm: init Not tainted 4.7.0-00003-gc668bb9-dirty #366
[    7.790000]
[    7.790000] Stack Trace:
[    7.790000]   arc_unwind_core.constprop.1+0xa4/0x118
[    7.800000]   warn_slowpath_fmt+0x72/0x158
[    7.800000]   resume_user_mode_begin+0x48/0xf0
[    7.810000] ---[ end trace 6f6a7a8fae20d2f0 ]---

Signed-off-by: Daniel Mentz <danielmentz@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

usb: xhci: Fix panic if disconnect

[ Upstream commit 88716a93766b8f095cdef37a8e8f2c93aa233b21 ]

After a device is disconnected, xhci_stop_device() will be invoked
in xhci_bus_suspend().
Also the "disconnect" IRQ will have ISR to invoke
xhci_free_virt_device() in this sequence.
xhci_irq -> xhci_handle_event -> handle_cmd_completion ->
xhci_handle_cmd_disable_slot -> xhci_free_virt_device

If xhci->devs[slot_id] has been assigned to NULL in
xhci_free_virt_device(), then virt_dev->eps[i].ring in
xhci_stop_device() may point to an invlid address to cause kernel
panic.

virt_dev = xhci->devs[slot_id];
:
if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue)

[] Unable to handle kernel paging request at virtual address 00001a68
[] pgd=ffffffc001430000
[] [00001a68] *pgd=000000013c807003, *pud=000000013c807003,
*pmd=000000013c808003, *pte=0000000000000000
[] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[] CPU: 0 PID: 39 Comm: kworker/0:1 Tainted: G     U
[] Workqueue: pm pm_runtime_work
[] task: ffffffc0bc0e0bc0 ti: ffffffc0bc0ec000 task.ti:
ffffffc0bc0ec000
[] PC is at xhci_stop_device.constprop.11+0xb4/0x1a4

This issue is found when running with realtek ethernet device
(0bda:8153).

Signed-off-by: Jim Lin <jilin@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

xhci: always handle "Command Ring Stopped" events

[ Upstream commit 33be126510974e2eb9679f1ca9bca4f67ee4c4c7 ]

Fix "Command completion event does not match command" errors by always
handling the command ring stopped events.

The command ring stopped event is generated as a result of aborting
or stopping the command ring with a register write. It is not caused
by a command in the command queue, and thus won't have a matching command
in the comman list.

Solve it by handling the command ring stopped event before checking for a
matching command.

In most command time out cases we abort the command ring, and get
a command ring stopped event. The events command pointer will point at
the current command ring dequeue, which in most cases matches the timed
out command in the command list, and no error messages are seen.

If we instead get a command aborted event before the command ring stopped
event, the abort event will increse the command ring dequeue pointer, and
the following command ring stopped events command pointer will point at the
next, not yet queued command. This case triggered the error message

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

cdc-acm: fix wrong pipe type on rx interrupt xfers

[ Upstream commit add125054b8727103631dce116361668436ef6a7 ]

This fixes the "BOGUS urb xfer" warning logged by usb_submit_urb().

Signed-off-by: Gavin Li <git@thegavinli.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

usb: misc: usbtest: add fix for driver hang

[ Upstream commit 539587511835ea12d8daa444cbed766cf2bc3612 ]

In sg_timeout(), req->status is set to "-ETIMEDOUT" before calling
into usb_sg_cancel(). usb_sg_cancel() will do nothing and return
directly if req->status has been set to a non-zero value. This will
cause driver hang whenever transfer time out is triggered.

This patch fixes this issue. It could be backported to stable kernel
with version later than v3.15.

Cc: stable@vger.kernel.org # 3.15+
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

usb: renesas_usbhs: Use dmac only if the pipe type is bulk

[ Upstream commit 700aa7ff8d2c2b9cc669c99375e2ccd06d3cd38d ]

This patch fixes an issue that isochronous transfer's data is possible to
be lost as a workaround. Since this driver uses a workqueue to start
the dmac, the transfer is possible to be delayed when system load is high.

Fixes: 6e4b74e4690d ("usb: renesas: fix scheduling in atomic context bug")
Cc: <stable@vger.kernel.org> # v3.4+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

usb: renesas_usbhs: clear the BRDYSTS in usbhsg_ep_enable()

[ Upstream commit 9ab967e6db7412b675ecbff80d5371d53c82cb2e ]

This patch fixes an issue that unexpected BRDY interruption happens
when the usb_ep_{enable,disable}() are called with different direction.
In this case, the driver will cause the following message:

 renesas_usbhs e6590000.usb: irq_ready run_error 1 : -16

This issue causes the followings:
 1) A pipe is enabled as transmission
 2) The pipe sent a data
 3) The pipe is disabled and re-enabled as reception.
 4) The pipe got a queue

Since the driver doesn't clear the BRDYSTS flags after 2) above, the issue
happens. If we add such clearing the flags into the driver, the code will
become complicate. So, this patch clears the BRDYSTS flag of reception in
usbhsg_ep_enable() to avoid complicate.

Cc: <stable@vger.kernel.org> # v4.1+ (usbhs_xxxsts_clear() is needed)
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

drm/i915: fix aliasing_ppgtt leak

[ Upstream commit 3871f42a57efcdc6a9da751a8cb6fa196c212289 ]

In i915_ggtt_cleanup_hw we need to remember to free aliasing_ppgtt. This
fixes the following kmemleak message:

unreferenced object 0xffff880213cca000 (size 8192):
  comm "modprobe", pid 1298, jiffies 4294745402 (age 703.930s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff817c808e>] kmemleak_alloc+0x4e/0xb0
    [<ffffffff8121f9c2>] kmem_cache_alloc_trace+0x142/0x1d0
    [<ffffffffa06d11ef>] i915_gem_init_ggtt+0x10f/0x210 [i915]
    [<ffffffffa06d71bb>] i915_gem_init+0x5b/0xd0 [i915]
    [<ffffffffa069749a>] i915_driver_load+0x97a/0x1460 [i915]
    [<ffffffffa06a26ef>] i915_pci_probe+0x4f/0x70 [i915]
    [<ffffffff81423015>] local_pci_probe+0x45/0xa0
    [<ffffffff81424463>] pci_device_probe+0x103/0x150
    [<ffffffff81515e6c>] driver_probe_device+0x22c/0x440
    [<ffffffff81516151>] __driver_attach+0xd1/0xf0
    [<ffffffff8151379c>] bus_for_each_dev+0x6c/0xc0
    [<ffffffff8151555e>] driver_attach+0x1e/0x20
    [<ffffffff81514fa3>] bus_add_driver+0x1c3/0x280
    [<ffffffff81516aa0>] driver_register+0x60/0xe0
    [<ffffffff8142297c>] __pci_register_driver+0x4c/0x50
    [<ffffffffa013605b>] 0xffffffffa013605b

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: b18b6bde300e ("drm/i915/bdw: Free PPGTT struct")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470420280-21417-1-git-send-email-matthew.auld@intel.com
(cherry picked from commit cb7f27601c81a1e0454e9461e96f65b31fafbea0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

pinctrl/amd: Remove the default de-bounce time

[ Upstream commit 8cf4345575a416e6856a6856ac6eaa31ad883126 ]

In the function amd_gpio_irq_enable() and
amd_gpio_direction_input(), remove the code which is setting
the default de-bounce time to 2.75ms.

The driver code shall use the same settings as specified in
BIOS. Any default assignment impacts TouchPad behaviour when
the LevelTrig is set to EDGE FALLING.

Cc: stable@vger.kernel.org
Reviewed-by:  Ken Xue <Ken.Xue@amd.com>
Signed-off-by: Nitesh Kumar Agrawal <Nitesh-kumar.Agrawal@amd.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

usb: dwc3: pci: add Intel Kabylake PCI ID

[ Upstream commit 4491ed5042f0419b22a4b08331adb54af31e2caa ]

Intel Kabylake PCH has the same DWC3 than Intel
Sunrisepoint. Add the new ID to the supported devices.

Cc: <stable@vger.kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

usb: dwc3: pci: add support for Intel Broxton SOC

[ Upstream commit b4c580a43d520b7812c0fd064fbab929ce2f1da0 ]

PCI IDs for Broxton based platforms.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

usb: dwc3: pci: trivial: Formatting

[ Upstream commit 9a5a0783e4910d9e2063e87184fbd9cac7161a16 ]

Fix the alignment of the PCI device definitions. Also change the hex
digit capitalization of one constant to make it consistent with the
rest of the file and driver.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

usb: dwc3: gadget: always cleanup all TRBs

[ Upstream commit 7c705dfe2ebe731c8fd068623b6b4df2d3512c08 ]

If we stop earlier due to short packet, we will
not be able to giveback all TRBs.

Cc: <stable@vger.kernel.org>
Cc: Brian E Rogers <brian.e.rogers@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

usb: dwc3: gadget: fix for short pkts during chained xfers

[ Upstream commit e5b36ae2f851024d43c76e51f395d32ce8d769ce ]

DWC3 has one interesting peculiarity with chained
transfers. If we setup N chained transfers and we
get a short packet before processing all N TRBs,
DWC3 will (conditionally) issue a XferComplete or
XferInProgress event and retire all TRBs from the
one which got a short packet to the last without
clearing their HWO bits.

This means SW must clear HWO bit manually, which
this patch is doing.

Cc: <stable@vger.kernel.org>
Cc: Brian E Rogers <brian.e.rogers@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

usb: dwc3: gadget: increment request->actual once

[ Upstream commit c7de573471832dff7d31f0c13b0f143d6f017799 ]

When using SG lists, we would end up setting
request->actual to:

num_mapped_sgs * (request->length - count)

Let's fix that up by incrementing request->actual
only once.

Cc: <stable@vger.kernel.org>
Reported-by: Brian E Rogers <brian.e.rogers@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

s390/dasd: fix hanging device after clear subchannel

[ Upstream commit 9ba333dc55cbb9523553df973adb3024d223e905 ]

When a device is in a status where CIO has killed all I/O by itself the
interrupt for a clear request may not contain an irb to determine the
clear function. Instead it contains an error pointer -EIO.
This was ignored by the DASD int_handler leading to a hanging device
waiting for a clear interrupt.

Handle -EIO error pointer correctly for requests that are clear pending and
treat the clear as successful.

Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

usb: ehci: change order of register cleanup during shutdown

[ Upstream commit bc337b51508beb2d039aff5074a76cfe1c212030 ]

In ehci_turn_off_all_ports() all EHCI port registers are cleared to zero.
On some hardware, this can lead to an system hang,
when ehci_port_power() accesses the already cleared registers.

This patch changes the order of cleanup.
First call ehci_port_power() which respects the current bits in
port status registers
and afterwards cleanup the hard way by setting everything to zero.

Signed-off-by: Marc Ohlf <ohlf@mkt-sys.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

usb: hub: Fix unbalanced reference count/memory leak/deadlocks

[ Upstream commit 6bb47e8ab98accb1319bd43c64966340ba3bba9a ]

Memory leak and unbalanced reference count:

If the hub gets disconnected while the core is still activating it, this
can result in leaking memory of few USB structures.

This will happen if we have done a kref_get() from hub_activate() and
scheduled a delayed work item for HUB_INIT2/3. Now if hub_disconnect()
gets called before the delayed work expires, then we will cancel the
work from hub_quiesce(), but wouldn't do a kref_put(). And so the
unbalance.

kmemleak reports this as (with the commit e50293ef9775 backported to
3.10 kernel with other changes, though the same is true for mainline as
well):

unreferenced object 0xffffffc08af5b800 (size 1024):
  comm "khubd", pid 73, jiffies 4295051211 (age 6482.350s)
  hex dump (first 32 bytes):
    30 68 f3 8c c0 ff ff ff 00 a0 b2 2e c0 ff ff ff  0h..............
    01 00 00 00 00 00 00 00 00 94 7d 40 c0 ff ff ff  ..........}@....
  backtrace:
    [<ffffffc0003079ec>] create_object+0x148/0x2a0
    [<ffffffc000cc150c>] kmemleak_alloc+0x80/0xbc
    [<ffffffc000303a7c>] kmem_cache_alloc_trace+0x120/0x1ac
    [<ffffffc0006fa610>] hub_probe+0x120/0xb84
    [<ffffffc000702b20>] usb_probe_interface+0x1ec/0x298
    [<ffffffc0005d50cc>] driver_probe_device+0x160/0x374
    [<ffffffc0005d5308>] __device_attach+0x28/0x4c
    [<ffffffc0005d3164>] bus_for_each_drv+0x78/0xac
    [<ffffffc0005d4ee0>] device_attach+0x6c/0x9c
    [<ffffffc0005d42b8>] bus_probe_device+0x28/0xa0
    [<ffffffc0005d23a4>] device_add+0x324/0x604
    [<ffffffc000700fcc>] usb_set_configuration+0x660/0x6cc
    [<ffffffc00070a350>] generic_probe+0x44/0x84
    [<ffffffc000702914>] usb_probe_device+0x54/0x74
    [<ffffffc0005d50cc>] driver_probe_device+0x160/0x374
    [<ffffffc0005d5308>] __device_attach+0x28/0x4c

Deadlocks:

If the hub gets disconnected early enough (i.e. before INIT2/INIT3 are
finished and the init_work is still queued), the core may call
hub_quiesce() after acquiring interface device locks and it will wait
for the work to be cancelled synchronously. But if the work handler is
already running in parallel, it may try to acquire the same interface
device lock and this may result in deadlock.

Fix both the issues by removing the call to cancel_delayed_work_sync().

CC: <stable@vger.kernel.org> #4.4+
Fixes: e50293ef9775 ("USB: fix invalid memory access in hub_activate()")
Reported-by: Manu Gautam <mgautam@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

crypto: caam - fix non-hmac hashes

[ Upstream commit a0118c8b2be9297aed8e915c60b4013326b256d4 ]

Since 6de62f15b581 ("crypto: algif_hash - Require setkey before
accept(2)"), the AF_ALG interface requires userspace to provide a key
to any algorithm that has a setkey method.  However, the non-HMAC
algorithms are not keyed, so setting a key is unnecessary.

Fix this by removing the setkey method from the non-keyed hash
algorithms.

Fixes: 6de62f15b581 ("crypto: algif_hash - Require setkey before accept(2)")
Cc: <stable@vger.kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

aacraid: Check size values after double-fetch from user

[ Upstream commit fa00c437eef8dc2e7b25f8cd868cfa405fcc2bb3 ]

In aacraid's ioctl_send_fib() we do two fetches from userspace, one the
get the fib header's size and one for the fib itself. Later we use the
size field from the second fetch to further process the fib. If for some
reason the size from the second fetch is different than from the first
fix, we may encounter an out-of- bounds access in aac_fib_send(). We
also check the sender size to insure it is not out of bounds. This was
reported in https://bugzilla.kernel.org/show_bug.cgi?id=116751 and was
assigned CVE-2016-6480.

Reported-by: Pengfei Wang <wpengfeinudt@gmail.com>
Fixes: 7c00ffa31 '[SCSI] 2.6 aacraid: Variable FIB size (updated patch)'
Cc: stable@vger.kernel.org
Signed-off-by: Dave Carroll <david.carroll@microsemi.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

USB: serial: fix memleak in driver-registration error path

[ Upstream commit 647024a7df36014bbc4479d92d88e6b77c0afcf6 ]

udriver struct allocated by kzalloc() will not be freed
if usb_register() and next calls fail. This patch fixes this
by adding one more step with kfree(udriver) in error path.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

USB: serial: option: add support for Telit LE920A4

[ Upstream commit 01d7956b58e644ea0d2e8d9340c5727a8fc39d70 ]

This patch adds a set of compositions for Telit LE920A4.

Compositions in short are:

0x1207: tty + tty
0x1208: tty + adb + tty + tty
0x1211: tty + adb + ecm
0x1212: tty + adb
0x1213: ecm + tty
0x1214: tty + adb + ecm + tty

telit_le922_blacklist_usbcfg3 is reused for compositions 0x1211
and 0x1214 due to the same interfaces positions.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

USB: serial: ftdi_sio: add device ID for WICED USB UART dev board

[ Upstream commit ae34d12cc1e212ffcd92e069030e54dae69c832f ]

BCM20706V2_EVAL is a WICED dev board designed with FT2232H USB 2.0
UART/FIFO IC.

To support BCM920706V2_EVAL dev board for WICED development on Linux.
Add the VID(0a5c) and PID(6422) to ftdi_sio driver to allow loading
ftdi_sio for this board.

Signed-off-by: Sheng-Hui J. Chu <s.jeffrey.chu@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

USB: serial: ftdi_sio: add PIDs for Ivium Technologies devices

[ Upstream commit 6977495c06f7f47636a076ee5a0ca571279d9697 ]

Ivium Technologies uses the FTDI VID with custom PIDs for their line of
electrochemical interfaces and the PalmSens they developed for PalmSens
BV.

Signed-off-by: Robert Delien <robert@delien.nl>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

USB: serial: option: add D-Link DWM-156/A3

[ Upstream commit cf1b18030de29e4e5b0a57695ae5db4a89da0ff7 ]

The device has four interfaces; the three serial ports ought to be
handled by this driver:

00 Diagnostic interface serial port
01 NMEA device serial port
02 Mass storage (sd card)
03 Modem serial port

The other product ids listed in the Windows driver are present already.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

mac80211: fix purging multicast PS buffer queue

[ Upstream commit 6b07d9ca9b5363dda959b9582a3fc9c0b89ef3b5 ]

The code currently assumes that buffered multicast PS frames don't have
a pending ACK frame for tx status reporting.
However, hostapd sends a broadcast deauth frame on teardown for which tx
status is requested. This can lead to the "Have pending ack frames"
warning on module reload.
Fix this by using ieee80211_free_txskb/ieee80211_purge_tx_queue.

Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

tcp: enable per-socket rate limiting of all 'challenge acks'

[ Upstream commit 083ae308280d13d187512b9babe3454342a7987e ]

The per-socket rate limit for 'challenge acks' was introduced in the
context of limiting ack loops:

commit f2b2c582e824 ("tcp: mitigate ACK loops for connections as tcp_sock")

And I think it can be extended to rate limit all 'challenge acks' on a
per-socket basis.

Since we have the global tcp_challenge_ack_limit, this patch allows for
tcp_challenge_ack_limit to be set to a large value and effectively rely on
the per-socket limit, or set tcp_challenge_ack_limit to a lower value and
still prevents a single connections from consuming the entire challenge ack
quota.

It further moves in the direction of eliminating the global limit at some
point, as Eric Dumazet has suggested. This a follow-up to:
Subject: tcp: make challenge acks less predictable

Cc: Eric Dumazet <edumazet@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Yue Cao <ycao009@ucr.edu>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

tcp: make challenge acks less predictable

[ Upstream commit 75ff39ccc1bd5d3c455b6822ab09e533c551f758 ]

Yue Cao claims that current host rate limiting of challenge ACKS
(RFC 5961) could leak enough information to allow a patient attacker
to hijack TCP sessions. He will soon provide details in an academic
paper.

This patch increases the default limit from 100 to 1000, and adds
some randomization so that the attacker can no longer hijack
sessions without spending a considerable amount of probes.

Based on initial analysis and patch from Linus.

Note that we also have per socket rate limiting, so it is tempting
to remove the host limit in the future.

v2: randomize the count of challenge acks per second, not the period.

Fixes: 282f23c6ee34 ("tcp: implement RFC 5961 3.2")
Reported-by: Yue Cao <ycao009@ucr.edu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

powerpc/eeh: eeh_pci_enable(): fix checking of post-request state

[ Upstream commit 949e9b827eb4736d96df520c67d07a54c64e99b8 ]

In eeh_pci_enable(), after making the request to set the new options, we
call eeh_ops->wait_state() to check that the request finished successfully.

At the moment, if eeh_ops->wait_state() returns 0, we return 0 without
checking that it reflects the expected outcome. This can lead to callers
further up the chain incorrectly assuming the slot has been successfully
unfrozen and continuing to attempt recovery.

On powernv, this will occur if pnv_eeh_get_pe_state() or
pnv_eeh_get_phb_state() return 0, which in turn occurs if the relevant OPAL
call returns OPAL_EEH_STOPPED_MMIO_DMA_FREEZE or
OPAL_EEH_PHB_ERROR respectively.

On pseries, this will occur if pseries_eeh_get_state() returns 0, which in
turn occurs if RTAS reports that the PE is in the MMIO Stopped and DMA
Stopped states.

Obviously, none of these cases represent a successful completion of a
request to thaw MMIO or DMA.

Fix the check so that a wait_state() return value of 0 won't be considered
successful for the EEH_OPT_THAW_MMIO or EEH_OPT_THAW_DMA cases.

Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

Linux 4.1.31

Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

MIPS: KVM: Propagate kseg0/mapped tlb fault errors

commit 9b731bcfdec4c159ad2e4312e25d69221709b96a upstream.

Propagate errors from kvm_mips_handle_kseg0_tlb_fault() and
kvm_mips_handle_mapped_seg_tlb_fault(), usually triggering an internal
error since they normally indicate the guest accessed bad physical
memory or the commpage in an unexpected way.

Fixes: 858dd5d45733 ("KVM/MIPS32: MMU/TLB operations for the Guest.")
Fixes: e685c689f3a8 ("KVM/MIPS32: Privileged instruction/target branch emulation.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
[james.hogan@imgtec.com: Backport to v4.7]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

MIPS: KVM: Fix gfn range check in kseg0 tlb faults

commit 0741f52d1b980dbeb290afe67d88fc2928edd8ab upstream.

Two consecutive gfns are loaded into host TLB, so ensure the range check
isn't off by one if guest_pmap_npages is odd.

Fixes: 858dd5d45733 ("KVM/MIPS32: MMU/TLB operations for the Guest.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
[james.hogan@imgtec.com: Backport to v4.7]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

MIPS: KVM: Add missing gfn range check

commit 8985d50382359e5bf118fdbefc859d0dbf6cebc7 upstream.

kvm_mips_handle_mapped_seg_tlb_fault() calculates the guest frame number
based on the guest TLB EntryLo values, however it is not range checked
to ensure it lies within the guest_pmap. If the physical memory the
guest refers to is out of range then dump the guest TLB and emit an
internal error.

Fixes: 858dd5d45733 ("KVM/MIPS32: MMU/TLB operations for the Guest.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
[james.hogan@imgtec.com: Backport to v4.7]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

MIPS: KVM: Fix mapped fault broken commpage handling

commit c604cffa93478f8888bec62b23d6073dad03d43a upstream.

kvm_mips_handle_mapped_seg_tlb_fault() appears to map the guest page at
virtual address 0 to PFN 0 if the guest has created its own mapping
there. The intention is unclear, but it may have been an attempt to
protect the zero page from being mapped to anything but the comm page in
code paths you wouldn't expect from genuine commpage accesses (guest
kernel mode cache instructions on that address, hitting trapping
instructions when executing from that address with a coincidental TLB
eviction during the KVM handling, and guest user mode accesses to that
address).

Fix this to check for mappings exactly at KVM_GUEST_COMMPAGE_ADDR (it
may not be at address 0 since commit 42aa12e74e91 ("MIPS: KVM: Move
commpage so 0x0 is unmapped")), and set the corresponding EntryLo to be
interpreted as 0 (invalid).

Fixes: 858dd5d45733 ("KVM/MIPS32: MMU/TLB operations for the Guest.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
[james.hogan@imgtec.com: Backport to v4.7]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

ext4: verify extent header depth

[ Upstream commit 7bc9491645118c9461bd21099c31755ff6783593 ]

Although the extent tree depth of 5 should enough be for the worst
case of 2*32 extents of length 1, the extent tree code does not
currently to merge nodes which are less than half-full with a sibling
node, or to shrink the tree depth if possible.  So it's possible, at
least in theory, for the tree depth to be greater than 5.  However,
even in the worst case, a tree depth of 32 is highly unlikely, and if
the file system is maliciously corrupted, an insanely large eh_depth
can cause memory allocation failures that will trigger kernel warnings
(here, eh_depth = 65280):

    JBD2: ext4.exe wants too many credits credits:195849 rsv_credits:0 max:256
    ------------[ cut here ]------------
    WARNING: CPU: 0 PID: 50 at fs/jbd2/transaction.c:293 start_this_handle+0x569/0x580
    CPU: 0 PID: 50 Comm: ext4.exe Not tainted 4.7.0-rc5+ #508
    Stack:
     604a8947 625badd8 0002fd09 00000000
     60078643 00000000 62623910 601bf9bc
     62623970 6002fc84 626239b0 900000125
    Call Trace:
     [<6001c2dc>] show_stack+0xdc/0x1a0
     [<601bf9bc>] dump_stack+0x2a/0x2e
     [<6002fc84>] __warn+0x114/0x140
     [<6002fdff>] warn_slowpath_null+0x1f/0x30
     [<60165829>] start_this_handle+0x569/0x580
     [<60165d4e>] jbd2__journal_start+0x11e/0x220
     [<60146690>] __ext4_journal_start_sb+0x60/0xa0
     [<60120a81>] ext4_truncate+0x131/0x3a0
     [<60123677>] ext4_setattr+0x757/0x840
     [<600d5d0f>] notify_change+0x16f/0x2a0
     [<600b2b16>] do_truncate+0x76/0xc0
     [<600c3e56>] path_openat+0x806/0x1300
     [<600c55c9>] do_filp_open+0x89/0xf0
     [<600b4074>] do_sys_open+0x134/0x1e0
     [<600b4140>] SyS_open+0x20/0x30
     [<6001ea68>] handle_syscall+0x88/0x90
     [<600295fd>] userspace+0x3fd/0x500
     [<6001ac55>] fork_handler+0x85/0x90

    ---[ end trace 08b0b88b6387a244 ]---

[ Commit message modified and the extent tree depath check changed
from 5 to 32 -- tytso ]

Cc: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

ALSA: timer: Fix leak in events via snd_timer_user_tinterrupt

[ Upstream commit e4ec8cc8039a7063e24204299b462bd1383184a5 ]

The stack object “r1” has a total size of 32 bytes. Its field
“event” and “val” both contain 4 bytes padding. These 8 bytes
padding bytes are sent to user without being initialized.

Signed-off-by: Kangjie Lu <kjlu@gatech.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

ALSA: timer: Fix leak in events via snd_timer_user_ccallback

[ Upstream commit 9a47e9cff994f37f7f0dbd9ae23740d0f64f9fe6 ]

The stack object “r1” has a total size of 32 bytes. Its field
“event” and “val” both contain 4 bytes padding. These 8 bytes
padding bytes are sent to user without being initialized.

Signed-off-by: Kangjie Lu <kjlu@gatech.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

ALSA: timer: Fix leak in SNDRV_TIMER_IOCTL_PARAMS

[ Upstream commit cec8f96e49d9be372fdb0c3836dcf31ec71e457e ]

The stack object “tread” has a total size of 32 bytes. Its field
“event” and “val” both contain 4 bytes padding. These 8 bytes
padding bytes are sent to user without being initialized.

Signed-off-by: Kangjie Lu <kjlu@gatech.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

USB: OHCI: Don't mark EDs as ED_OPER if scheduling fails

[ Upstream commit c66f59ee5050447b3da92d36f5385a847990a894 ]

Since ed_schedule begins with marking the ED as "operational",
the ED may be left in such state even if scheduling actually
fails.

This allows future submission attempts to smuggle this ED to the
hardware behind the scheduler's back and without linking it to
the ohci->eds_in_use list.

The former causes bandwidth saturation and data loss on isoc
endpoints, the latter crashes the kernel when attempt is made
to unlink such ED from this list.

Fix ed_schedule to update ED state only on successful return.

Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

ovl: verify upper dentry before unlink and rename

[ Upstream commit 11f3710417d026ea2f4fcf362d866342c5274185 ]

Unlink and rename in overlayfs checked the upper dentry for staleness by
verifying upper->d_parent against upperdir.  However the dentry can go
stale also by being unhashed, for example.

Expand the verification to actually look up the name again (under parent
lock) and check if it matches the upper dentry.  This matches what the VFS
does before passing the dentry to filesytem's unlink/rename methods, which
excludes any inconsistency caused by overlayfs.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

iio:ad7266: Fix probe deferral for vref

[ Upstream commit 68b356eb3d9f5e38910fb62e22a78e2a18d544ae ]

Currently the ad7266 driver treats any failure to get vref as though the
regulator were not present but this means that if probe deferral is
triggered the driver will act as though the regulator were not present.
Instead only use the internal reference if we explicitly got -ENODEV which
is what is returned for absent regulators.

Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

iio:ad7266: Fix support for optional regulators

[ Upstream commit e5511c816e5ac4909bdd38e85ac344e2b9b8e984 ]

The ad7266 driver attempts to support deciding between the use of internal
and external power supplies by checking to see if an error is returned when
requesting the regulator. This doesn't work with the current code since the
driver uses a normal regulator_get() which is for non-optional supplies
and so assumes that if a regulator is not provided by the platform then
this is a bug in the platform integration and so substitutes a dummy
regulator. Use regulator_get_optional() instead which indicates to the
framework that the regulator may be absent and provides a dummy regulator
instead.

Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

iio:ad7266: Fix broken regulator error handling

[ Upstream commit 6b7f4e25f3309f106a5c7ff42c8231494cf285d3 ]

All regulator_get() variants return either a pointer to a regulator or an
ERR_PTR() so testing for NULL makes no sense and may lead to bugs if we
use NULL as a valid regulator. Fix this by using IS_ERR() as expected.

Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

iio: accel: kxsd9: fix the usage of spi_w8r8()

[ Upstream commit 0c1f91b98552da49d9d8eed32b3132a58d2f4598 ]

These two spi_w8r8() calls return a value with is used by the code
following the error check. The dubious use was caused by a cleanup
patch.

Fixes: d34dbee8ac8e ("staging:iio:accel:kxsd9 cleanup and conversion to iio_chan_spec.")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

staging: iio: accel: fix error check

[ Upstream commit ef3149eb3ddb7f9125e11c90f8330e371b55cffd ]

sca3000_read_ctrl_reg() returns a negative number on failure, check for
this instead of zero.

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

iio: proximity: as3935: fix buffer stack trashing

[ Upstream commit 37b1ba2c68cfbe37f5f45bb91bcfaf2b016ae6a1 ]

Buffer wasn't of a valid size to allow the timestamp, and correct padding.
This patchset also moves the buffer off the stack, and onto the heap.

Cc: george.mccollister@gmail.com
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

iio: proximity: as3935: remove triggered buffer processing

[ Upstream commit 7d0643634ea567969bf3f3ed6193a9d6fc75653b ]

Triggered buffers shouldn't return processed data, and the respective
conversion was overflowing the defined .realbits for the channel.

Cc: george.mccollister@gmail.com
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

iio: proximity: as3935: correct IIO_CHAN_INFO_RAW output

[ Upstream commit 5138806f16c74c7cb8ac3e408a859c79eb7c9567 ]

IIO_CHAN_INFO_RAW was returning processed data which was incorrect.
This also adds the IIO_CHAN_INFO_SCALE value to convert to a processed value.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

iio:st_pressure: fix sampling gains (bring inline with ABI)

[ Upstream commit d43a41152f8e9e4c0d19850884d1fada076dee10 ]

Temperature channels report scaled samples in Celsius although expected as
milli degree Celsius in Documentation/ABI/testing/sysfs-bus-iio.
Gains are not implemented at all for LPS001WP pressure and temperature
channels.

This patch ensures that proper offsets and scales are exposed to userpace
for both pressure and temperature channels.
Also fix a NULL pointer exception when userspace reads content of sysfs
scale attribute when gains are not defined.

Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

iio: Fix error handling in iio_trigger_attach_poll_func

[ Upstream commit 99543823357966ac938d9a310947e731b67338e6 ]

When attaching a pollfunc iio_trigger_attach_poll_func will allocate a
virtual irq and call the driver's set_trigger_state function. Fix error
handling to undo previous steps if any fails.

In particular this fixes handling errors from a driver's
set_trigger_state function. When using triggered buffers a failure to
enable the trigger used to make the buffer unusable.

Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

perf/x86: Fix undefined shift on 32-bit kernels

[ Upstream commit 6d6f2833bfbf296101f9f085e10488aef2601ba5 ]

Jim reported:

UBSAN: Undefined behaviour in arch/x86/events/intel/core.c:3708:12
shift exponent 35 is too large for 32-bit type 'long unsigned int'

The use of 'unsigned long' type obviously is not correct here, make it
'unsigned long long' instead.

Reported-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Imre Palik <imrep@amazon.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 2c33645d366d ("perf/x86: Honor the architectural performance monitoring version")
Link: http://lkml.kernel.org/r/1462974711-10037-1-git-send-email-aryabinin@virtuozzo.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

virtio_balloon: fix PFN format for virtio-1

[ Upstream commit 87c9403b0d1de4676b0bd273eea68fcf6de68e68 ]

Everything should be LE when using virtio-1, but
the linux balloon driver does not seem to care about that.

Reported-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>