Cédric Le Goater [Wed, 31 Mar 2021 14:45:12 +0000 (16:45 +0200)]
powerpc/xive: Fix xmon command "dxi"
When under xmon, the "dxi" command dumps the state of the XIVE
interrupts. If an interrupt number is specified, only the state of
the associated XIVE interrupt is dumped. This form of the command
lacks an irq_data parameter which is nevertheless used by
xmon_xive_get_irq_config(), leading to an xmon crash.
Fix that by doing a lookup in the system IRQ mapping to query the IRQ
descriptor data. Invalid interrupt numbers, or not belonging to the
XIVE IRQ domain, OPAL event interrupt number for instance, should be
caught by the previous query done at the firmware level.
Fixes:
97ef27507793 ("powerpc/xive: Fix xmon support on the PowerNV platform")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-8-clg@kaod.org
Cédric Le Goater [Wed, 31 Mar 2021 14:45:11 +0000 (16:45 +0200)]
powerpc/xive: Simplify the dump of XIVE interrupts under xmon
Move the xmon routine under XIVE subsystem and rework the loop on the
interrupts taking into account the xive_irq_domain to filter out IPIs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-7-clg@kaod.org
Cédric Le Goater [Wed, 31 Mar 2021 14:45:10 +0000 (16:45 +0200)]
powerpc/xive: Drop check on irq_data in xive_core_debug_show()
When looping on IRQ descriptor, irq_data is always valid.
Fixes:
930914b7d528 ("powerpc/xive: Add a debugfs file to dump internal XIVE state")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-6-clg@kaod.org
Cédric Le Goater [Wed, 31 Mar 2021 14:45:09 +0000 (16:45 +0200)]
powerpc/xive: Simplify xive_core_debug_show()
Now that the IPI interrupt has its own domain, the checks on the HW
interrupt number XIVE_IPI_HW_IRQ and on the chip can be replaced by a
check on the domain.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-5-clg@kaod.org
Cédric Le Goater [Wed, 31 Mar 2021 14:45:08 +0000 (16:45 +0200)]
powerpc/xive: Remove useless check on XIVE_IPI_HW_IRQ
The IPI interrupt has its own domain now. Testing the HW interrupt
number is not needed anymore.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-4-clg@kaod.org
Cédric Le Goater [Wed, 31 Mar 2021 14:45:07 +0000 (16:45 +0200)]
powerpc/xive: Introduce an IPI interrupt domain
The IPI interrupt is a special case of the XIVE IRQ domain. When
mapping and unmapping the interrupts in the Linux interrupt number
space, the HW interrupt number 0 (XIVE_IPI_HW_IRQ) is checked to
distinguish the IPI interrupt from other interrupts of the system.
Simplify the XIVE interrupt domain by introducing a specific domain
for the IPI.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-3-clg@kaod.org
Yu Kuai [Wed, 7 Apr 2021 12:59:03 +0000 (20:59 +0800)]
powerpc/smp: Make some symbols static
The sparse tool complains as follows:
arch/powerpc/kernel/smp.c:86:1: warning:
symbol '__pcpu_scope_cpu_coregroup_map' was not declared. Should it be static?
arch/powerpc/kernel/smp.c:125:1: warning:
symbol '__pcpu_scope_thread_group_l1_cache_map' was not declared. Should it be static?
arch/powerpc/kernel/smp.c:132:1: warning:
symbol '__pcpu_scope_thread_group_l2_cache_map' was not declared. Should it be static?
These symbols are not used outside of smp.c, so this
commit marks them static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210407125903.4139663-1-yukuai3@huawei.com
Yu Kuai [Wed, 7 Apr 2021 12:58:03 +0000 (20:58 +0800)]
macintosh/via-pmu: Make some symbols static
The sparse tool complains as follows:
drivers/macintosh/via-pmu.c:183:5: warning:
symbol 'pmu_cur_battery' was not declared. Should it be static?
drivers/macintosh/via-pmu.c:190:5: warning:
symbol '__fake_sleep' was not declared. Should it be static?
These symbols are not used outside of via-pmu.c, so this
commit marks them static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210407125803.4138837-1-yukuai3@huawei.com
Yu Kuai [Wed, 7 Apr 2021 12:57:38 +0000 (20:57 +0800)]
windfarm: make symbol 'wf_thread' static
The sparse tool complains as follows:
drivers/macintosh/windfarm_core.c:59:20: warning:
symbol 'wf_thread' was not declared. Should it be static?
This symbol is not used outside of windfarm_core.c, so this
commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210407125738.4138480-1-yukuai3@huawei.com
Yu Kuai [Wed, 7 Apr 2021 12:57:12 +0000 (20:57 +0800)]
macintosh/windfarm: Make symbol 'pm121_sys_state' static
The sparse tool complains as follows:
drivers/macintosh/windfarm_pm121.c:436:24: warning:
symbol 'pm121_sys_state' was not declared. Should it be static?
This symbol is not used outside of windfarm_pm121.c, so this
commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210407125712.4138033-1-yukuai3@huawei.com
Li Huafei [Thu, 8 Apr 2021 03:58:02 +0000 (11:58 +0800)]
powerpc/mce: Make symbol 'mce_ue_event_work' static
The sparse tool complains as follows:
arch/powerpc/kernel/mce.c:43:1: warning:
symbol 'mce_ue_event_work' was not declared. Should it be static?
This symbol is not used outside of mce.c, so this commit marks it
static.
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408035802.31853-1-lihuafei1@huawei.com
Li Huafei [Thu, 8 Apr 2021 03:39:51 +0000 (11:39 +0800)]
powerpc/security: Make symbol 'stf_barrier' static
The sparse tool complains as follows:
arch/powerpc/kernel/security.c:253:6: warning:
symbol 'stf_barrier' was not declared. Should it be static?
This symbol is not used outside of security.c, so this commit marks it
static.
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408033951.28369-1-lihuafei1@huawei.com
Christophe Leroy [Thu, 1 Apr 2021 13:30:43 +0000 (13:30 +0000)]
powerpc/32s: Define a MODULE area below kernel text all the time
On book3s/32, the segment below kernel text is used for module
allocation when CONFIG_STRICT_KERNEL_RWX is defined.
In order to benefit from the powerpc specific module_alloc()
function which allocate modules with 32 Mbytes from
end of kernel text, use that segment below PAGE_OFFSET at all time.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a46dcdd39a9e80b012d86c294c4e5cd8d31665f3.1617283827.git.christophe.leroy@csgroup.eu
Christophe Leroy [Thu, 1 Apr 2021 13:30:42 +0000 (13:30 +0000)]
powerpc/8xx: Define a MODULE area below kernel text
On the 8xx, TASK_SIZE is 0x80000000. The space between TASK_SIZE
and PAGE_OFFSET is not used.
In order to benefit from the powerpc specific module_alloc()
function which allocate modules with 32 Mbytes from
end of kernel text, define MODULES_VADDR and MODULES_END.
Set a 256Mb area just below PAGE_OFFSET, like book3s/32.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a225606d5b3a8bc53fe612ad52c855c60b0a0a58.1617283827.git.christophe.leroy@csgroup.eu
Christophe Leroy [Thu, 1 Apr 2021 13:30:41 +0000 (13:30 +0000)]
powerpc/modules: Load modules closer to kernel text
On book3s/32, when STRICT_KERNEL_RWX is selected, modules are
allocated on the segment just before kernel text, ie on the
0xb0000000-0xbfffffff when PAGE_OFFSET is 0xc0000000.
On the 8xx, TASK_SIZE is 0x80000000. The space between TASK_SIZE and
PAGE_OFFSET is not used and could be used for modules.
The idea comes from ARM architecture.
Having modules just below PAGE_OFFSET offers an opportunity to
minimise the distance between kernel text and modules and avoid
trampolines in modules to access kernel functions or other module
functions.
When MODULES_VADDR is defined, powerpc has it's own module_alloc()
function. In that function, first try to allocate the module
above the limit defined by '_etext - 32M'. Then if the allocation
fails, fallback to the entire MODULES area.
DEBUG logs in module_32.c without the patch:
[ 1572.588822] module_32: Applying ADD relocate section 13 to 12
[ 1572.588891] module_32: Doing plt for call to 0xc00671a4 at 0xcae04024
[ 1572.588964] module_32: Initialized plt for 0xc00671a4 at
cae04000
[ 1572.589037] module_32: REL24 value =
CAE04000. location =
CAE04024
[ 1572.589110] module_32: Location before:
48000001.
[ 1572.589171] module_32: Location after:
4BFFFFDD.
[ 1572.589231] module_32: ie. jump to
03FFFFDC+
CAE04024 =
CEE04000
[ 1572.589317] module_32: Applying ADD relocate section 15 to 14
[ 1572.589386] module_32: Doing plt for call to 0xc00671a4 at 0xcadfc018
[ 1572.589457] module_32: Initialized plt for 0xc00671a4 at
cadfc000
[ 1572.589529] module_32: REL24 value =
CADFC000. location =
CADFC018
[ 1572.589601] module_32: Location before:
48000000.
[ 1572.589661] module_32: Location after:
4BFFFFE8.
[ 1572.589723] module_32: ie. jump to
03FFFFE8+
CADFC018 =
CEDFC000
With the patch:
[ 279.404671] module_32: Applying ADD relocate section 13 to 12
[ 279.404741] module_32: REL24 value =
C00671B4. location =
BF808024
[ 279.404814] module_32: Location before:
48000001.
[ 279.404874] module_32: Location after:
4885F191.
[ 279.404933] module_32: ie. jump to
0085F190+
BF808024 =
C00671B4
[ 279.405016] module_32: Applying ADD relocate section 15 to 14
[ 279.405085] module_32: REL24 value =
C00671B4. location =
BF800018
[ 279.405156] module_32: Location before:
48000000.
[ 279.405215] module_32: Location after:
4886719C.
[ 279.405275] module_32: ie. jump to
0086719C+
BF800018 =
C00671B4
We see that with the patch, no plt entries are set.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0c3d5cb8a4dfdf6ca1b8aeb385c01470d6628d55.1617283827.git.christophe.leroy@csgroup.eu
Vaibhav Jain [Sun, 4 Apr 2021 16:31:48 +0000 (22:01 +0530)]
powerpc/mm: Add cond_resched() while removing hpte mappings
While removing large number of mappings from hash page tables for
large memory systems as soft-lockup is reported because of the time
spent inside htap_remove_mapping() like one below:
watchdog: BUG: soft lockup - CPU#8 stuck for 23s!
<snip>
NIP plpar_hcall+0x38/0x58
LR pSeries_lpar_hpte_invalidate+0x68/0xb0
Call Trace:
0x1fffffffffff000 (unreliable)
pSeries_lpar_hpte_removebolted+0x9c/0x230
hash__remove_section_mapping+0xec/0x1c0
remove_section_mapping+0x28/0x3c
arch_remove_memory+0xfc/0x150
devm_memremap_pages_release+0x180/0x2f0
devm_action_release+0x30/0x50
release_nodes+0x28c/0x300
device_release_driver_internal+0x16c/0x280
unbind_store+0x124/0x170
drv_attr_store+0x44/0x60
sysfs_kf_write+0x64/0x90
kernfs_fop_write+0x1b0/0x290
__vfs_write+0x3c/0x70
vfs_write+0xd4/0x270
ksys_write+0xdc/0x130
system_call+0x5c/0x70
Fix this by adding a cond_resched() to the loop in
htap_remove_mapping() that issues hcall to remove hpte mapping. The
call to cond_resched() is issued every HZ jiffies which should prevent
the soft-lockup from being reported.
Suggested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210404163148.321346-1-vaibhav@linux.ibm.com
Shivaprasad G Bhat [Mon, 29 Mar 2021 17:36:43 +0000 (13:36 -0400)]
powerpc/papr_scm: Implement support for H_SCM_FLUSH hcall
Add support for ND_REGION_ASYNC capability if the device tree
indicates 'ibm,hcall-flush-required' property in the NVDIMM node.
Flush is done by issuing H_SCM_FLUSH hcall to the hypervisor.
If the flush request failed, the hypervisor is expected to
to reflect the problem in the subsequent nvdimm H_SCM_HEALTH call.
This patch prevents mmap of namespaces with MAP_SYNC flag if the
nvdimm requires an explicit flush[1].
References:
[1] https://github.com/avocado-framework-tests/avocado-misc-tests/blob/master/memory/ndctl.py.data/map_sync.c
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Use unsigned long / long instead of uint64_t/int64_t]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/161703936121.36.7260632399582101498.stgit@e1fbed493c87
Christophe Leroy [Sun, 11 Apr 2021 16:39:53 +0000 (16:39 +0000)]
powerpc/signal32: Fix build failure with CONFIG_SPE
Add missing fault exit label in unsafe_copy_from_user() in order to
avoid following build failure with CONFIG_SPE
CC arch/powerpc/kernel/signal_32.o
arch/powerpc/kernel/signal_32.c: In function 'restore_user_regs':
arch/powerpc/kernel/signal_32.c:565:36: error: macro "unsafe_copy_from_user" requires 4 arguments, but only 3 given
565 | ELF_NEVRREG * sizeof(u32));
| ^
In file included from ./include/linux/uaccess.h:11,
from ./include/linux/sched/task.h:11,
from ./include/linux/sched/signal.h:9,
from ./include/linux/rcuwait.h:6,
from ./include/linux/percpu-rwsem.h:7,
from ./include/linux/fs.h:33,
from ./include/linux/huge_mm.h:8,
from ./include/linux/mm.h:707,
from arch/powerpc/kernel/signal_32.c:17:
./arch/powerpc/include/asm/uaccess.h:428: note: macro "unsafe_copy_from_user" defined here
428 | #define unsafe_copy_from_user(d, s, l, e) \
|
arch/powerpc/kernel/signal_32.c:564:3: error: 'unsafe_copy_from_user' undeclared (first use in this function); did you mean 'raw_copy_from_user'?
564 | unsafe_copy_from_user(current->thread.evr, &sr->mc_vregs,
| ^~~~~~~~~~~~~~~~~~~~~
| raw_copy_from_user
arch/powerpc/kernel/signal_32.c:564:3: note: each undeclared identifier is reported only once for each function it appears in
make[3]: *** [arch/powerpc/kernel/signal_32.o] Error 1
Fixes:
627b72bee84d ("powerpc/signal32: Convert restore_[tm]_user_regs() to user access block")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/aad2cb1801a3cc99bc27081022925b9fc18a0dfb.1618159169.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 5 Apr 2021 09:57:27 +0000 (09:57 +0000)]
powerpc/32: Remove powerpc specific definition of 'ptrdiff_t'
For unknown reason, old commit
d27dfd388715 ("Import pre2.0.8")
changed 'ptrdiff_t' from 'int' to 'long'.
GCC expects it as 'int' really, and this leads to the following
warning when building KFENCE:
CC mm/kfence/report.o
In file included from ./include/linux/printk.h:7,
from ./include/linux/kernel.h:16,
from mm/kfence/report.c:10:
mm/kfence/report.c: In function 'kfence_report_error':
./include/linux/kern_levels.h:5:18: warning: format '%td' expects argument of type 'ptrdiff_t', but argument 6 has type 'long int' [-Wformat=]
5 | #define KERN_SOH "\001" /* ASCII Start Of Header */
| ^~~~~~
./include/linux/kern_levels.h:11:18: note: in expansion of macro 'KERN_SOH'
11 | #define KERN_ERR KERN_SOH "3" /* error conditions */
| ^~~~~~~~
./include/linux/printk.h:343:9: note: in expansion of macro 'KERN_ERR'
343 | printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
| ^~~~~~~~
mm/kfence/report.c:213:3: note: in expansion of macro 'pr_err'
213 | pr_err("Out-of-bounds %s at 0x%p (%luB %s of kfence-#%td):\n",
| ^~~~~~
<asm-generic/uapi/posix-types.h> defines it as 'int', and
defines 'size_t' and 'ssize_t' exactly as powerpc do, so
remove the powerpc specific definitions and fallback on
generic ones.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e43d133bf52fa19e577f64f3a3a38cedc570377d.1617616601.git.christophe.leroy@csgroup.eu
Randy Dunlap [Sun, 4 Apr 2021 19:26:23 +0000 (12:26 -0700)]
powerpc: iommu: fix build when neither PCI or IBMVIO is set
When neither CONFIG_PCI nor CONFIG_IBMVIO is set/enabled, iommu.c has a
build error. The fault injection code is not useful in that kernel config,
so make the FAIL_IOMMU option depend on PCI || IBMVIO.
Prevents this build error (warning escalated to error):
../arch/powerpc/kernel/iommu.c:178:30: error: 'fail_iommu_bus_notifier' defined but not used [-Werror=unused-variable]
178 | static struct notifier_block fail_iommu_bus_notifier = {
Fixes:
d6b9a81b2a45 ("powerpc: IOMMU fault injection")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210404192623.10697-1-rdunlap@infradead.org
Yang Li [Tue, 6 Apr 2021 01:33:05 +0000 (09:33 +0800)]
powerpc/pseries: remove unneeded semicolon
Eliminate the following coccicheck warning:
./arch/powerpc/platforms/pseries/lpar.c:1633:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1617672785-81372-1-git-send-email-yang.lee@linux.alibaba.com
Nicholas Piggin [Tue, 6 Apr 2021 02:55:08 +0000 (12:55 +1000)]
powerpc/64s: power4 nap fixup in C
There is no need for this to be in asm, use the new intrrupt entry wrapper.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210406025508.821718-1-npiggin@gmail.com
Athira Rajeev [Tue, 6 Apr 2021 16:16:01 +0000 (12:16 -0400)]
powerpc/perf: Fix PMU constraint check for EBB events
The power PMU group constraints includes check for EBB events to make
sure all events in a group must agree on EBB. This will prevent
scheduling EBB and non-EBB events together. But in the existing check,
settings for constraint mask and value is interchanged. Patch fixes the
same.
Before the patch, PMU selftest "cpu_event_pinned_vs_ebb_test" fails with
below in dmesg logs. This happens because EBB event gets enabled along
with a non-EBB cpu event.
[35600.453346] cpu_event_pinne[41326]: illegal instruction (4)
at
10004a18 nip
10004a18 lr
100049f8 code 1 in
cpu_event_pinned_vs_ebb_test[
10000000+10000]
Test results after the patch:
$ ./pmu/ebb/cpu_event_pinned_vs_ebb_test
test: cpu_event_pinned_vs_ebb
tags: git_version:v5.12-rc5-93-gf28c3125acd3-dirty
Binding to cpu 8
EBB Handler is at 0x100050c8
read error on event 0x7fffe6bd4040!
PM_RUN_INST_CMPL: result 9872 running/enabled
37930432
success: cpu_event_pinned_vs_ebb
This bug was hidden by other logic until commit
1908dc911792 (perf:
Tweak perf_event_attr::exclusive semantics).
Fixes:
4df489991182 ("powerpc/perf: Add power8 EBB support")
Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Mention commit
1908dc911792]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1617725761-1464-1-git-send-email-atrajeev@linux.vnet.ibm.com
Jordan Niethe [Thu, 25 Feb 2021 03:21:07 +0000 (14:21 +1100)]
selftests/powerpc: Suggest memtrace instead of /dev/mem for ci memory
The suggested alternative for getting cache-inhibited memory with 'mem='
and /dev/mem is pretty hacky. Also, PAPR guests do not allow system
memory to be mapped cache-inhibited so despite /dev/mem being available
this will not work which can cause confusion. Instead recommend using
the memtrace buffers. memtrace is only available on powernv so there
will not be any chance of trying to do this in a guest.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225032108.1458352-2-jniethe5@gmail.com
Jordan Niethe [Thu, 25 Feb 2021 03:21:06 +0000 (14:21 +1100)]
powerpc/powernv/memtrace: Allow mmaping trace buffers
Let the memory removed from the linear mapping to be used for the trace
buffers be mmaped. This is a useful way of providing cache-inhibited
memory for the alignment_handler selftest.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: make memtrace_mmap() static as noticed by lkp@intel.com]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225032108.1458352-1-jniethe5@gmail.com
Michael Ellerman [Mon, 15 Mar 2021 03:41:59 +0000 (14:41 +1100)]
powerpc/kexec: Don't use .machine ppc64 in trampoline_64.S
As best as I can tell the ".machine" directive in trampoline_64.S is no
longer, or never was, necessary.
It was added in commit
0d97631392c2 ("powerpc: Add purgatory for
kexec_file_load() implementation."), which created the file based on
the kexec-tools purgatory. It may be/have-been necessary in the
kexec-tools version, but we have a completely different build system,
and we already pass the desired CPU flags, eg:
gcc ... -m64 -Wl,-a64 -mabi=elfv2 -Wa,-maltivec -Wa,-mpower4 -Wa,-many
... arch/powerpc/purgatory/trampoline_64.S
So drop the ".machine" directive and rely on the assembler flags.
Reported-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/r/20210315034159.315675-1-mpe@ellerman.id.au
Michael Ellerman [Fri, 26 Mar 2021 10:12:01 +0000 (21:12 +1100)]
powerpc/64: Move security code into security.c
When the original spectre/meltdown mitigations were merged we put them
in setup_64.c for lack of a better place.
Since then we created security.c for some of the other mitigation
related code. But it should all be in there.
This sort of code movement can cause trouble for backports, but
hopefully this code is relatively stable these days (famous last words).
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210326101201.1973552-1-mpe@ellerman.id.au
Michael Ellerman [Wed, 31 Mar 2021 00:38:45 +0000 (11:38 +1100)]
powerpc/mm/64s: Allow STRICT_KERNEL_RWX again
We have now fixed the known bugs in STRICT_KERNEL_RWX for Book3S
64-bit Hash and Radix MMUs, see preceding commits, so allow the
option to be selected again.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-6-mpe@ellerman.id.au
Michael Ellerman [Wed, 31 Mar 2021 00:38:44 +0000 (11:38 +1100)]
powerpc/mm/64s/hash: Add real-mode change_memory_range() for hash LPAR
When we enabled STRICT_KERNEL_RWX we received some reports of boot
failures when using the Hash MMU and running under phyp. The crashes
are intermittent, and often exhibit as a completely unresponsive
system, or possibly an oops.
One example, which was caught in xmon:
[ 14.068327][ T1] devtmpfs: mounted
[ 14.069302][ T1] Freeing unused kernel memory: 5568K
[ 14.142060][ T347] BUG: Unable to handle kernel instruction fetch
[ 14.142063][ T1] Run /sbin/init as init process
[ 14.142074][ T347] Faulting instruction address: 0xc000000000004400
cpu 0x2: Vector: 400 (Instruction Access) at [
c00000000c7475e0]
pc:
c000000000004400: exc_virt_0x4400_instruction_access+0x0/0x80
lr:
c0000000001862d4: update_rq_clock+0x44/0x110
sp:
c00000000c747880
msr:
8000000040001031
current = 0xc00000000c60d380
paca = 0xc00000001ec9de80 irqmask: 0x03 irq_happened: 0x01
pid = 347, comm = kworker/2:1
...
enter ? for help
[
c00000000c747880]
c0000000001862d4 update_rq_clock+0x44/0x110 (unreliable)
[
c00000000c7478f0]
c000000000198794 update_blocked_averages+0xb4/0x6d0
[
c00000000c7479f0]
c000000000198e40 update_nohz_stats+0x90/0xd0
[
c00000000c747a20]
c0000000001a13b4 _nohz_idle_balance+0x164/0x390
[
c00000000c747b10]
c0000000001a1af8 newidle_balance+0x478/0x610
[
c00000000c747be0]
c0000000001a1d48 pick_next_task_fair+0x58/0x480
[
c00000000c747c40]
c000000000eaab5c __schedule+0x12c/0x950
[
c00000000c747cd0]
c000000000eab3e8 schedule+0x68/0x120
[
c00000000c747d00]
c00000000016b730 worker_thread+0x130/0x640
[
c00000000c747da0]
c000000000174d50 kthread+0x1a0/0x1b0
[
c00000000c747e10]
c00000000000e0f0 ret_from_kernel_thread+0x5c/0x6c
This shows that CPU 2, which was idle, woke up and then appears to
randomly take an instruction fault on a completely valid area of
kernel text.
The cause turns out to be the call to hash__mark_rodata_ro(), late in
boot. Due to the way we layout text and rodata, that function actually
changes the permissions for all of text and rodata to read-only plus
execute.
To do the permission change we use a hypervisor call, H_PROTECT. On
phyp that appears to be implemented by briefly removing the mapping of
the kernel text, before putting it back with the updated permissions.
If any other CPU is executing during that window, it will see spurious
faults on the kernel text and/or data, leading to crashes.
To fix it we use stop machine to collect all other CPUs, and then have
them drop into real mode (MMU off), while we change the mapping. That
way they are unaffected by the mapping temporarily disappearing.
We don't see this bug on KVM because KVM always use VPM=1, where
faults are directed to the hypervisor, and the fault will be
serialised vs the h_protect() by HPTE_V_HVLOCK.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-5-mpe@ellerman.id.au
Michael Ellerman [Wed, 31 Mar 2021 00:38:43 +0000 (11:38 +1100)]
powerpc/mm/64s/hash: Factor out change_memory_range()
Pull the loop calling hpte_updateboltedpp() out of
hash__change_memory_range() into a helper function. We need it to be a
separate function for the next patch.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-4-mpe@ellerman.id.au
Michael Ellerman [Wed, 31 Mar 2021 00:38:42 +0000 (11:38 +1100)]
powerpc/64s: Use htab_convert_pte_flags() in hash__mark_rodata_ro()
In hash__mark_rodata_ro() we pass the raw PP_RXXX value to
hash__change_memory_range(). That has the effect of setting the key to
zero, because PP_RXXX contains no key value.
Fix it by using htab_convert_pte_flags(), which knows how to convert a
pgprot into a pp value, including the key.
Fixes:
d94b827e89dc ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Link: https://lore.kernel.org/r/20210331003845.216246-3-mpe@ellerman.id.au
Michael Ellerman [Wed, 31 Mar 2021 00:38:41 +0000 (11:38 +1100)]
powerpc/pseries: Add key to flags in pSeries_lpar_hpte_updateboltedpp()
The flags argument to plpar_pte_protect() (aka. H_PROTECT), includes
the key in bits 9-13, but currently we always set those bits to zero.
In the past that hasn't been a problem because we always used key 0
for the kernel, and updateboltedpp() is only used for kernel mappings.
However since commit
d94b827e89dc ("powerpc/book3s64/kuap: Use Key 3
for kernel mapping with hash translation") we are now inadvertently
changing the key (to zero) when we call plpar_pte_protect().
That hasn't broken anything because updateboltedpp() is only used for
STRICT_KERNEL_RWX, which is currently disabled on 64s due to other
bugs.
But we want to fix that, so first we need to pass the key correctly to
plpar_pte_protect(). We can't pass our newpp value directly in, we
have to convert it into the form expected by the hcall.
The hcall we're using here is H_PROTECT, which is specified in section
14.5.4.1.6 of LoPAPR v1.1.
It takes a `flags` parameter, and the description for flags says:
* flags: AVPN, pp0, pp1, pp2, key0-key4, n, and for the CMO
option: CMO Option flags as defined in Table 189‚
If you then go to the start of the parent section, 14.5.4.1, on page
405, it says:
Register Linkage (For hcall() tokens 0x04 - 0x18)
* On Call
* R3 function call token
* R4 flags (see Table 178‚ “Page Frame Table Access flags field
definition‚” on page 401)
Then you have to go to section 14.5.3, and on page 394 there is a list
of hcalls and their tokens (table 176), and there you can see that
H_PROTECT == 0x18.
Finally you can look at table 178, on page 401, where it specifies the
layout of the bits for the key:
Bit Function
-----------------
50-54 | key0-key4
Those are big-endian bit numbers, converting to normal bit numbers you
get bits 9-13, or 0x3e00.
In the kernel we have:
#define HPTE_R_KEY_HI ASM_CONST(0x3000000000000000)
#define HPTE_R_KEY_LO ASM_CONST(0x0000000000000e00)
So the LO bits of newpp are already in the right place, and the HI
bits need to be shifted down by 48.
Fixes:
d94b827e89dc ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-2-mpe@ellerman.id.au
Michael Ellerman [Wed, 31 Mar 2021 00:38:40 +0000 (11:38 +1100)]
powerpc/mm/64s: Add _PAGE_KERNEL_ROX
In the past we had a fallback definition for _PAGE_KERNEL_ROX, but we
removed that in commit
d82fd29c5a8c ("powerpc/mm: Distribute platform
specific PAGE and PMD flags and definitions") and added definitions
for each MMU family.
However we missed adding a definition for 64s, which was not really a
bug because it's currently not used.
But we'd like to use PAGE_KERNEL_ROX in a future patch so add a
definition now.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-1-mpe@ellerman.id.au
Jordan Niethe [Mon, 8 Feb 2021 03:29:57 +0000 (14:29 +1100)]
selftests/powerpc: Test for spurious kernel memory faults on radix
Previously when mapping kernel memory on radix, no ptesync was
included which would periodically lead to unhandled spurious faults.
Mapping kernel memory is used when code patching with Strict RWX
enabled. As suggested by Chris Riedl, turning ftrace on and off does a
large amount of code patching so is a convenient way to see this kind
of fault.
Add a selftest to try and trigger this kind of a spurious fault. It
tests for 30 seconds which is usually long enough for the issue to
show up.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Rename it to better reflect what it does, rather than the symptom]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210208032957.1232102-2-jniethe5@gmail.com
Jordan Niethe [Mon, 8 Feb 2021 03:29:56 +0000 (14:29 +1100)]
powerpc/64s: Fix pte update for kernel memory on radix
When adding a PTE a ptesync is needed to order the update of the PTE
with subsequent accesses otherwise a spurious fault may be raised.
radix__set_pte_at() does not do this for performance gains. For
non-kernel memory this is not an issue as any faults of this kind are
corrected by the page fault handler. For kernel memory these faults
are not handled. The current solution is that there is a ptesync in
flush_cache_vmap() which should be called when mapping from the
vmalloc region.
However, map_kernel_page() does not call flush_cache_vmap(). This is
troublesome in particular for code patching with Strict RWX on radix.
In do_patch_instruction() the page frame that contains the instruction
to be patched is mapped and then immediately patched. With no ordering
or synchronization between setting up the PTE and writing to the page
it is possible for faults.
As the code patching is done using __put_user_asm_goto() the resulting
fault is obscured - but using a normal store instead it can be seen:
BUG: Unable to handle kernel data access on write at 0xc008000008f24a3c
Faulting instruction address: 0xc00000000008bd74
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in: nop_module(PO+) [last unloaded: nop_module]
CPU: 4 PID: 757 Comm: sh Tainted: P O 5.10.0-rc5-01361-ge3c1b78c8440-dirty #43
NIP:
c00000000008bd74 LR:
c00000000008bd50 CTR:
c000000000025810
REGS:
c000000016f634a0 TRAP: 0300 Tainted: P O (5.10.0-rc5-01361-ge3c1b78c8440-dirty)
MSR:
9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR:
44002884 XER:
00000000
CFAR:
c00000000007c68c DAR:
c008000008f24a3c DSISR:
42000000 IRQMASK: 1
This results in the kind of issue reported here:
https://lore.kernel.org/linuxppc-dev/
15AC5B0E-A221-4B8C-9039-
FA96B8EF7C88@lca.pw/
Chris Riedl suggested a reliable way to reproduce the issue:
$ mount -t debugfs none /sys/kernel/debug
$ (while true; do echo function > /sys/kernel/debug/tracing/current_tracer ; echo nop > /sys/kernel/debug/tracing/current_tracer ; done) &
Turning ftrace on and off does a large amount of code patching which
in usually less then 5min will crash giving a trace like:
ftrace-powerpc: (____ptrval____): replaced (
4b473b11) != old (
60000000)
------------[ ftrace bug ]------------
ftrace failed to modify
[<
c000000000bf8e5c>] napi_busy_loop+0xc/0x390
actual: 11:3b:47:4b
Setting ftrace call site to call ftrace function
ftrace record flags:
80000001
(1)
expected tramp:
c00000000006c96c
------------[ cut here ]------------
WARNING: CPU: 4 PID: 809 at kernel/trace/ftrace.c:2065 ftrace_bug+0x28c/0x2e8
Modules linked in: nop_module(PO-) [last unloaded: nop_module]
CPU: 4 PID: 809 Comm: sh Tainted: P O 5.10.0-rc5-01360-gf878ccaf250a #1
NIP:
c00000000024f334 LR:
c00000000024f330 CTR:
c0000000001a5af0
REGS:
c000000004c8b760 TRAP: 0700 Tainted: P O (5.10.0-rc5-01360-gf878ccaf250a)
MSR:
900000000282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR:
28008848 XER:
20040000
CFAR:
c0000000001a9c98 IRQMASK: 0
GPR00:
c00000000024f330 c000000004c8b9f0 c000000002770600 0000000000000022
GPR04:
00000000ffff7fff c000000004c8b6d0 0000000000000027 c0000007fe9bcdd8
GPR08:
0000000000000023 ffffffffffffffd8 0000000000000027 c000000002613118
GPR12:
0000000000008000 c0000007fffdca00 0000000000000000 0000000000000000
GPR16:
0000000023ec37c5 0000000000000000 0000000000000000 0000000000000008
GPR20:
c000000004c8bc90 c0000000027a2d20 c000000004c8bcd0 c000000002612fe8
GPR24:
0000000000000038 0000000000000030 0000000000000028 0000000000000020
GPR28:
c000000000ff1b68 c000000000bf8e5c c00000000312f700 c000000000fbb9b0
NIP ftrace_bug+0x28c/0x2e8
LR ftrace_bug+0x288/0x2e8
Call Trace:
ftrace_bug+0x288/0x2e8 (unreliable)
ftrace_modify_all_code+0x168/0x210
arch_ftrace_update_code+0x18/0x30
ftrace_run_update_code+0x44/0xc0
ftrace_startup+0xf8/0x1c0
register_ftrace_function+0x4c/0xc0
function_trace_init+0x80/0xb0
tracing_set_tracer+0x2a4/0x4f0
tracing_set_trace_write+0xd4/0x130
vfs_write+0xf0/0x330
ksys_write+0x84/0x140
system_call_exception+0x14c/0x230
system_call_common+0xf0/0x27c
To fix this when updating kernel memory PTEs using ptesync.
Fixes:
f1cb8f9beba8 ("powerpc/64s/radix: avoid ptesync after set_pte and ptep_set_access_flags")
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Tidy up change log slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210208032957.1232102-1-jniethe5@gmail.com
Bhaskar Chowdhury [Wed, 20 Jan 2021 14:20:21 +0000 (19:50 +0530)]
powerpc: Spelling/typo fixes
Various spelling/typo fixes.
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Christophe Leroy [Tue, 23 Mar 2021 15:47:59 +0000 (15:47 +0000)]
powerpc: Switch to relative jump labels
Convert powerpc to relative jump labels.
Before the patch, pseries_defconfig vmlinux.o has:
9074 __jump_table
0003f2a0 0000000000000000 0000000000000000 01321fa8 2**0
With the patch, the same config gets:
9074 __jump_table
0002a0e0 0000000000000000 0000000000000000 01321fb4 2**0
Size is 258720 without the patch, 172256 with the patch.
That's a 33% size reduction.
Largely copied from commit
c296146c058c ("arm64/kernel: jump_label:
Switch to relative references")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/828348da7868eda953ce023994404dfc49603b64.1616514473.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 22 Mar 2021 16:37:53 +0000 (16:37 +0000)]
powerpc/bpf: Reallocate BPF registers to volatile registers when possible on PPC32
When the BPF routine doesn't call any function, the non volatile
registers can be reallocated to volatile registers in order to
avoid having to save them/restore on the stack.
Before this patch, the test #359 ADD default X is:
0: 7c 64 1b 78 mr r4,r3
4: 38 60 00 00 li r3,0
8: 94 21 ff b0 stwu r1,-80(r1)
c: 60 00 00 00 nop
10: 92 e1 00 2c stw r23,44(r1)
14: 93 01 00 30 stw r24,48(r1)
18: 93 21 00 34 stw r25,52(r1)
1c: 93 41 00 38 stw r26,56(r1)
20: 39 80 00 00 li r12,0
24: 39 60 00 00 li r11,0
28: 3b 40 00 00 li r26,0
2c: 3b 20 00 00 li r25,0
30: 7c 98 23 78 mr r24,r4
34: 7c 77 1b 78 mr r23,r3
38: 39 80 00 42 li r12,66
3c: 39 60 00 00 li r11,0
40: 7d 8c d2 14 add r12,r12,r26
44: 39 60 00 00 li r11,0
48: 7d 83 63 78 mr r3,r12
4c: 82 e1 00 2c lwz r23,44(r1)
50: 83 01 00 30 lwz r24,48(r1)
54: 83 21 00 34 lwz r25,52(r1)
58: 83 41 00 38 lwz r26,56(r1)
5c: 38 21 00 50 addi r1,r1,80
60: 4e 80 00 20 blr
After this patch, the same test has become:
0: 7c 64 1b 78 mr r4,r3
4: 38 60 00 00 li r3,0
8: 94 21 ff b0 stwu r1,-80(r1)
c: 60 00 00 00 nop
10: 39 80 00 00 li r12,0
14: 39 60 00 00 li r11,0
18: 39 00 00 00 li r8,0
1c: 38 e0 00 00 li r7,0
20: 7c 86 23 78 mr r6,r4
24: 7c 65 1b 78 mr r5,r3
28: 39 80 00 42 li r12,66
2c: 39 60 00 00 li r11,0
30: 7d 8c 42 14 add r12,r12,r8
34: 39 60 00 00 li r11,0
38: 7d 83 63 78 mr r3,r12
3c: 38 21 00 50 addi r1,r1,80
40: 4e 80 00 20 blr
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b94562d7d2bb21aec89de0c40bb3cd91054b65a2.1616430991.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 22 Mar 2021 16:37:52 +0000 (16:37 +0000)]
powerpc/bpf: Implement extended BPF on PPC32
Implement Extended Berkeley Packet Filter on Powerpc 32
Test result with test_bpf module:
test_bpf: Summary: 378 PASSED, 0 FAILED, [354/366 JIT'ed]
Registers mapping:
[BPF_REG_0] = r11-r12
/* function arguments */
[BPF_REG_1] = r3-r4
[BPF_REG_2] = r5-r6
[BPF_REG_3] = r7-r8
[BPF_REG_4] = r9-r10
[BPF_REG_5] = r21-r22 (Args 9 and 10 come in via the stack)
/* non volatile registers */
[BPF_REG_6] = r23-r24
[BPF_REG_7] = r25-r26
[BPF_REG_8] = r27-r28
[BPF_REG_9] = r29-r30
/* frame pointer aka BPF_REG_10 */
[BPF_REG_FP] = r17-r18
/* eBPF jit internal registers */
[BPF_REG_AX] = r19-r20
[TMP_REG] = r31
As PPC32 doesn't have a redzone in the stack, a stack frame must always
be set in order to host at least the tail count counter.
The stack frame remains for tail calls, it is set by the first callee
and freed by the last callee.
r0 is used as temporary register as much as possible. It is referenced
directly in the code in order to avoid misusing it, because some
instructions interpret it as value 0 instead of register r0
(ex: addi, addis, stw, lwz, ...)
The following operations are not implemented:
case BPF_ALU64 | BPF_DIV | BPF_X: /* dst /= src */
case BPF_ALU64 | BPF_MOD | BPF_X: /* dst %= src */
case BPF_STX | BPF_XADD | BPF_DW: /* *(u64 *)(dst + off) += src */
The following operations are only implemented for power of two constants:
case BPF_ALU64 | BPF_MOD | BPF_K: /* dst %= imm */
case BPF_ALU64 | BPF_DIV | BPF_K: /* dst /= imm */
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/61d8b149176ddf99e7d5cef0b6dc1598583ca202.1616430991.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 22 Mar 2021 16:37:51 +0000 (16:37 +0000)]
powerpc/asm: Add some opcodes in asm/ppc-opcode.h for PPC32 eBPF
The following opcodes will be needed for the implementation
of eBPF for PPC32. Add them in asm/ppc-opcode.h
PPC_RAW_ADDE
PPC_RAW_ADDZE
PPC_RAW_ADDME
PPC_RAW_MFLR
PPC_RAW_ADDIC
PPC_RAW_ADDIC_DOT
PPC_RAW_SUBFC
PPC_RAW_SUBFE
PPC_RAW_SUBFIC
PPC_RAW_SUBFZE
PPC_RAW_ANDIS
PPC_RAW_NOR
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f7bd573a368edd78006f8a5af508c726e7ce1ed2.1616430991.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 22 Mar 2021 16:37:50 +0000 (16:37 +0000)]
powerpc/bpf: Change values of SEEN_ flags
Because PPC32 will use more non volatile registers,
move SEEN_ flags to positions 0-2 which corresponds to special
registers.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/608faa1dc3ecfead649e15392abd07b00313d2ba.1616430991.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 22 Mar 2021 16:37:49 +0000 (16:37 +0000)]
powerpc/bpf: Move common functions into bpf_jit_comp.c
Move into bpf_jit_comp.c the functions that will remain common to
PPC64 and PPC32 when we add support of EBPF for PPC32.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2c339d77fb168ef12b213ccddfee3cb6c8ce8ae1.1616430991.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 22 Mar 2021 16:37:48 +0000 (16:37 +0000)]
powerpc/bpf: Move common helpers into bpf_jit.h
Move functions bpf_flush_icache(), bpf_is_seen_register() and
bpf_set_seen_register() in order to reuse them in future
bpf_jit_comp32.c
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/28e8d5a75e64807d7e9d39a4b52658755e259f8c.1616430991.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 22 Mar 2021 16:37:47 +0000 (16:37 +0000)]
powerpc/bpf: Change register numbering for bpf_set/is_seen_register()
Instead of using BPF register number as input in functions
bpf_set_seen_register() and bpf_is_seen_register(), use
CPU register number directly.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0cd2506f598e7095ea43e62dca1f472de5474a0d.1616430991.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 22 Mar 2021 16:37:46 +0000 (16:37 +0000)]
powerpc/bpf: Remove classical BPF support for PPC32
At the time being, PPC32 has Classical BPF support.
The test_bpf module exhibits some failure:
test_bpf: #298 LD_IND byte frag jited:1 ret 202 != 66 FAIL (1 times)
test_bpf: #299 LD_IND halfword frag jited:1 ret 51958 != 17220 FAIL (1 times)
test_bpf: #301 LD_IND halfword mixed head/frag jited:1 ret 51958 != 1305 FAIL (1 times)
test_bpf: #303 LD_ABS byte frag jited:1 ret 202 != 66 FAIL (1 times)
test_bpf: #304 LD_ABS halfword frag jited:1 ret 51958 != 17220 FAIL (1 times)
test_bpf: #306 LD_ABS halfword mixed head/frag jited:1 ret 51958 != 1305 FAIL (1 times)
test_bpf: Summary: 371 PASSED, 7 FAILED, [119/366 JIT'ed]
Fixing this is not worth the effort. Instead, remove support for
classical BPF and prepare for adding Extended BPF support instead.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/fbc3e4fcc9c8f6131d6c705212530b2aa50149ee.1616430991.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 19 Mar 2021 11:07:00 +0000 (11:07 +0000)]
powerpc/signal32: Simplify logging in sigreturn()
Same spirit as commit
debf122c777f ("powerpc/signal32: Simplify logging
in handle_rt_signal32()"), remove this intermediate 'addr' local var.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/638fa99530beb29f82f94370057d110e91272acc.1616151715.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 19 Mar 2021 11:06:58 +0000 (11:06 +0000)]
powerpc/signal32: Convert do_setcontext[_tm]() to user access block
Add unsafe_get_user_sigset() and transform PPC32 get_sigset_t()
into an unsafe version unsafe_get_sigset_t().
Then convert do_setcontext() and do_setcontext_tm() to use
user_read_access_begin/end.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9273ba664db769b8d9c7540ae91395e346e4945e.1616151715.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 19 Mar 2021 11:06:57 +0000 (11:06 +0000)]
powerpc/signal32: Convert restore_[tm]_user_regs() to user access block
Convert restore_user_regs() and restore_tm_user_regs()
to use user_access_read_begin/end blocks.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/181adf15a6f644efcd1aeafb355f3578ff1b6bc5.1616151715.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 19 Mar 2021 11:06:56 +0000 (11:06 +0000)]
powerpc/signal32: Reorder user reads in restore_tm_user_regs()
In restore_tm_user_regs(), regroup the reads from 'sr' and the ones
from 'tm_sr' together in order to allow two block user accesses
in following patch.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7c518b9a4c8e5ae9a3bfb647bc8b20bf820233af.1616151715.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 19 Mar 2021 11:06:55 +0000 (11:06 +0000)]
powerpc/signal32: Perform access_ok() inside restore_user_regs()
In preparation of using user_access_begin/end in restore_user_regs(),
move the access_ok() inside the function.
It makes no difference as the behaviour on a failed access_ok() is
the same as on failed restore_user_regs().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c106eb2f37c3040f1fd38b40e50c670feb7cb835.1616151715.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 19 Mar 2021 11:06:54 +0000 (11:06 +0000)]
powerpc/signal32: Remove ifdefery in middle of if/else in sigreturn()
In the same spirit as commit
f1cf4f93de2f ("powerpc/signal32: Remove
ifdefery in middle of if/else")
MSR_TM_ACTIVE() is always defined and returns always 0 when
CONFIG_PPC_TRANSACTIONAL_MEM is not selected, so the awful
ifdefery in the middle of an if/else can be removed.
Make 'msr_hi' a 'long long' to avoid build failure on PPC32
due to the 32 bits left shift.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a4b48b2f0be1ef13fc8e57452b7f8350da28d521.1616151715.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 19 Mar 2021 11:06:53 +0000 (11:06 +0000)]
powerpc/signal32: Rename save_user_regs_unsafe() and save_general_regs_unsafe()
Convention is to prefix functions with __unsafe_ instead of
suffixing it with _unsafe.
Rename save_user_regs_unsafe() and save_general_regs_unsafe()
accordingly, that is respectively __unsafe_save_general_regs() and
__unsafe_save_user_regs().
Suggested-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8cef43607e5b35a7fd0829dec812d88beb570df2.1616151715.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 19 Mar 2021 11:06:52 +0000 (11:06 +0000)]
powerpc/signal: Add unsafe_copy_ck{fpr/vsx}_from_user
Add unsafe_copy_ckfpr_from_user() and unsafe_copy_ckvsx_from_user()
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1040687aa27553d19f749f7fb48f0c07af98ee2d.1616151715.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 19 Mar 2021 11:06:51 +0000 (11:06 +0000)]
powerpc/uaccess: Also perform 64 bits copies in unsafe_copy_from_user() on ppc32
Similarly to commit
5cf773fc8f37 ("powerpc/uaccess: Also perform
64 bits copies in unsafe_copy_to_user() on ppc32")
ppc32 has an efficiant 64 bits unsafe_get_user(), so also use it in
order to unroll loops more.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/308e65d9237a14e8c0e3b22919fcf0b5e5592608.1616151715.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 19 Mar 2021 11:06:50 +0000 (11:06 +0000)]
signal: Add unsafe_get_compat_sigset()
In the same way as commit
14026b94ccfe ("signal: Add
unsafe_put_compat_sigset()"), this time add
unsafe_get_compat_sigset() macro which is the 'unsafe'
version of get_compat_sigset()
For the bigendian, use unsafe_get_user() directly
to avoid intermediate copy through the stack.
For the littleendian, use a straight unsafe_copy_from_user().
This commit adds the generic fallback for unsafe_copy_from_user().
Architectures wanting to use unsafe_get_compat_sigset() have to
make sure they have their own unsafe_copy_from_user().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b05bf434ee13c76bc9df5f02653a10db5e7b54e5.1616151715.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 10 Mar 2021 17:46:54 +0000 (17:46 +0000)]
powerpc/uaccess: Use asm goto for get_user when compiler supports it
clang 11 and future GCC are supporting asm goto with outputs.
Use it to implement get_user in order to get better generated code.
Note that clang requires to set x in the default branch of
__get_user_size_goto() otherwise is compliant about x not being
initialised :puzzled:
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/403745b5aaa1b315bb4e8e46c1ba949e77eecec0.1615398265.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 10 Mar 2021 17:46:53 +0000 (17:46 +0000)]
powerpc/uaccess: Introduce __get_user_size_goto()
We have got two places doing a goto based on the result
of __get_user_size_allowed().
Refactor that into __get_user_size_goto().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/def8a39289e02653cfb1583b3b19837de9efed3a.1615398265.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 10 Mar 2021 17:46:52 +0000 (17:46 +0000)]
powerpc/uaccess: Refactor get/put_user() and __get/put_user()
Make get_user() do the access_ok() check then call __get_user().
Make put_user() do the access_ok() check then call __put_user().
Then embed __get_user_size() and __put_user_size() in
__get_user() and __put_user().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/eebc554f6a81f570c46ea3551000ff5b886e4faa.1615398265.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 10 Mar 2021 17:46:51 +0000 (17:46 +0000)]
powerpc/uaccess: Rename __get/put_user_check/nocheck
__get_user_check() becomes get_user()
__put_user_check() becomes put_user()
__get_user_nocheck() becomes __get_user()
__put_user_nocheck() becomes __put_user()
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/41d7e45f4733f0e61e63824e4865b4e049db74d6.1615398265.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 10 Mar 2021 17:46:50 +0000 (17:46 +0000)]
powerpc/uaccess: Split out __get_user_nocheck()
One part of __get_user_nocheck() is used for __get_user(),
the other part for unsafe_get_user().
Move the part dedicated to unsafe_get_user() in it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/618fe2e0626b308a5a063d5baac827b968e85c32.1615398265.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 10 Mar 2021 17:46:49 +0000 (17:46 +0000)]
powerpc/uaccess: Remove calls to __get_user_bad() and __put_user_bad()
__get_user_bad() and __put_user_bad() are functions that are
declared but not defined, in order to make the link fail in
case they are called.
Nowadays, we have BUILD_BUG() and BUILD_BUG_ON() for that, and
they have the advantage to break the build earlier as it breaks
it at compile time instead of link time.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d7d839e994f49fae4ff7b70fac72bd951272436b.1615398265.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 10 Mar 2021 17:46:48 +0000 (17:46 +0000)]
powerpc/uaccess: Remove __chk_user_ptr() in __get/put_user
Commit
d02f6b7dab82 ("powerpc/uaccess: Evaluate macro arguments once,
before user access is allowed") changed the __chk_user_ptr()
argument from the passed ptr pointer to the locally
declared __gu_addr. But __gu_addr is locally defined as __user
so the check is pointless.
During kernel build __chk_user_ptr() voids and is only evaluated
during sparse checks so it should have been armless to leave the
original pointer check there.
Nevertheless, this check is indeed redundant with the assignment
above which casts the ptr pointer to the local __user __gu_addr.
In case of mismatch, sparse will detect it there, so the
__check_user_ptr() is not needed anywhere else than in access_ok().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/69f17d75046733b891ab2e668dbf464787cdf598.1615398265.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 10 Mar 2021 17:46:47 +0000 (17:46 +0000)]
powerpc/uaccess: Remove __unsafe_put_user_goto()
__unsafe_put_user_goto() is just an intermediate layer to
__put_user_size_goto() without added value other than doing
the __user pointer type checking.
Do the __user pointer type checking in __put_user_size_goto()
and remove __unsafe_put_user_goto().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b6552149209aebd887a6977272b06a41256bdb9f.1615398265.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 10 Mar 2021 17:46:46 +0000 (17:46 +0000)]
powerpc/uaccess: Call might_fault() inconditionaly
Commit
6bfd93c32a50 ("powerpc: Fix incorrect might_sleep in
__get_user/__put_user on kernel addresses") added a check to not call
might_sleep() on kernel addresses. This was to enable the use of
__get_user() in the alignment exception handler for any address.
Then commit
95156f0051cb ("lockdep, mm: fix might_fault() annotation")
added a check of the address space in might_fault(), based on
set_fs() logic. But this didn't solve the powerpc alignment exception
case as it didn't call set_fs(KERNEL_DS).
Nowadays, set_fs() is gone, previous patch fixed the alignment
exception handler and __get_user/__put_user are not supposed to be
used anymore to read kernel memory.
Therefore the is_kernel_addr() check has become useless and can be
removed.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e0a980a4dc7a2551183dd5cb30f46eafdbee390c.1615398265.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 10 Mar 2021 17:46:45 +0000 (17:46 +0000)]
powerpc/align: Don't use __get_user_instr() on kernel addresses
In the old days, when we didn't have kernel userspace access
protection and had set_fs(), it was wise to use __get_user()
and friends to read kernel memory.
Nowadays, get_user() is granting userspace access and is exclusively
for userspace access.
In alignment exception handler, use probe_kernel_read_inst()
instead of __get_user_instr() for reading instructions in kernel.
This will allow to remove the is_kernel_addr() check in
__get/put_user() in a following patch.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d9ecbce00178484e66ca7adec2ff210058037704.1615398265.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 10 Mar 2021 17:46:44 +0000 (17:46 +0000)]
powerpc/uaccess: Move get_user_instr helpers in asm/inst.h
Those helpers use get_user helpers but they don't participate
in their implementation, so they do not belong to asm/uaccess.h
Move them in asm/inst.h
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2c6e83581b4fa434aa7cf2fa7714c41e98f57007.1615398265.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 10 Mar 2021 17:46:43 +0000 (17:46 +0000)]
powerpc/uaccess: Remove __get/put_user_inatomic()
Powerpc is the only architecture having _inatomic variants of
__get_user() and __put_user() accessors. They were introduced
by commit
e68c825bb016 ("[POWERPC] Add inatomic versions of __get_user
and __put_user").
Those variants expand to the _nosleep macros instead of expanding
to the _nocheck macros. The only difference between the _nocheck
and the _nosleep macros is the call to might_fault().
Since commit
662bbcb2747c ("mm, sched: Allow uaccess in atomic with
pagefault_disable()"), __get/put_user() can be used in atomic parts
of the code, therefore __get/put_user_inatomic() have become useless.
Remove __get_user_inatomic() and __put_user_inatomic().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1e5c895669e8d54a7810b62dc61eb111f33c2c37.1615398265.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 12 Mar 2021 13:25:11 +0000 (13:25 +0000)]
powerpc/align: Convert emulate_spe() to user_access_begin
This patch converts emulate_spe() to using user_access_begin
logic.
Since commit
662bbcb2747c ("mm, sched: Allow uaccess in atomic with
pagefault_disable()"), might_fault() doesn't fire when called from
sections where pagefaults are disabled, which must be the case
when using _inatomic variants of __get_user and __put_user. So
the might_fault() in user_access_begin() is not a problem.
There was a verification of user_mode() together with the access_ok(),
but there is a second verification of user_mode() just after, that
leads to immediate return. The access_ok() is now part of the
user_access_begin which is called after that other user_mode()
verification, so no need to check user_mode() again.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c95a648fdf75992c9d88f3c73cc23e7537fcf2ad.1615555354.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 10 Mar 2021 17:46:41 +0000 (17:46 +0000)]
powerpc/uaccess: Define ___get_user_instr() for ppc32
Define simple ___get_user_instr() for ppc32 instead of
defining ppc32 versions of the three get_user_instr()
helpers.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e02f83ec74f26d76df2874f0ce4d5cc69c3469ae.1615398265.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 10 Mar 2021 17:46:40 +0000 (17:46 +0000)]
powerpc/uaccess: Remove __get_user_allowed() and unsafe_op_wrap()
Those two macros have only one user which is unsafe_get_user().
Put everything in one place and remove them.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/439179c5e54c18f2cb8bdf1eea13ea0ef6b98375.1615398265.git.christophe.leroy@csgroup.eu
Aneesh Kumar K.V [Thu, 18 Mar 2021 03:48:55 +0000 (09:18 +0530)]
powerpc/mm: Revert "powerpc/mm: Remove DEBUG_VM_PGTABLE support on powerpc"
This reverts commit
675bceb097e6 ("powerpc/mm: Remove DEBUG_VM_PGTABLE support on powerpc")
All the related issues are fixed as of commit:
f14312e1ed1e ("mm/debug_vm_pgtable: avoid doing memory allocation with pgtable_t mapped.")
Hence re-enable it.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210318034855.74513-1-aneesh.kumar@linux.ibm.com
Michael Ellerman [Tue, 16 Mar 2021 01:09:38 +0000 (12:09 +1100)]
powerpc/pseries: Only register vio drivers if vio bus exists
The vio bus is a fake bus, which we use on pseries LPARs (guests) to
discover devices provided by the hypervisor. There's no need or sense
in creating the vio bus on bare metal systems.
Which is why commit
4336b9337824 ("powerpc/pseries: Make vio and
ibmebus initcalls pseries specific") made the initialisation of the
vio bus only happen in LPARs.
However as a result of that commit we now see errors at boot on bare
metal systems:
Driver 'hvc_console' was unable to register with bus_type 'vio' because the bus was not initialized.
Driver 'tpm_ibmvtpm' was unable to register with bus_type 'vio' because the bus was not initialized.
This happens because those drivers are built-in, and are calling
vio_register_driver(). It in turn calls driver_register() with a
reference to vio_bus_type, but we haven't registered vio_bus_type with
the driver core.
Fix it by also guarding vio_register_driver() with a check to see if
we are on pseries.
Fixes:
4336b9337824 ("powerpc/pseries: Make vio and ibmebus initcalls pseries specific")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20210316010938.525657-1-mpe@ellerman.id.au
dingsenjie [Fri, 26 Mar 2021 11:53:56 +0000 (19:53 +0800)]
powerpc/powernv: Remove unneeded variable: "rc"
Remove unneeded variable: "rc".
Signed-off-by: dingsenjie <dingsenjie@yulong.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210326115356.12444-1-dingsenjie@163.com
Chen Huang [Sat, 27 Mar 2021 09:49:00 +0000 (09:49 +0000)]
powerpc: Fix HAVE_HARDLOCKUP_DETECTOR_ARCH build configuration
When compiling the powerpc with the SMP disabled, it shows the issue:
arch/powerpc/kernel/watchdog.c: In function ‘watchdog_smp_panic’:
arch/powerpc/kernel/watchdog.c:177:4: error: implicit declaration of function ‘smp_send_nmi_ipi’; did you mean ‘smp_send_stop’? [-Werror=implicit-function-declaration]
177 | smp_send_nmi_ipi(c, wd_lockup_ipi, 1000000);
| ^~~~~~~~~~~~~~~~
| smp_send_stop
cc1: all warnings being treated as errors
make[2]: *** [scripts/Makefile.build:273: arch/powerpc/kernel/watchdog.o] Error 1
make[1]: *** [scripts/Makefile.build:534: arch/powerpc/kernel] Error 2
make: *** [Makefile:1980: arch/powerpc] Error 2
make: *** Waiting for unfinished jobs....
We found that powerpc used ipi to implement hardlockup watchdog, so the
HAVE_HARDLOCKUP_DETECTOR_ARCH should depend on the SMP.
Fixes:
2104180a5369 ("powerpc/64s: implement arch-specific hardlockup watchdog")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Huang <chenhuang5@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210327094900.938555-1-chenhuang5@huawei.com
Daniel Henrique Barboza [Tue, 23 Mar 2021 20:50:56 +0000 (17:50 -0300)]
powerpc/pseries/hotplug-cpu: Show 'last online CPU' error in dlpar_cpu_offline()
One of the reasons that dlpar_cpu_offline can fail is when attempting to
offline the last online CPU of the kernel. This can be observed in a
pseries QEMU guest that has hotplugged CPUs. If the user offlines all
other CPUs of the guest, and a hotplugged CPU is now the last online
CPU, trying to reclaim it will fail.
The current error message in this situation returns rc with -EBUSY and a
generic explanation, e.g.:
pseries-hotplug-cpu: Failed to offline CPU PowerPC,POWER9, rc: -16
EBUSY can be caused by other conditions, such as cpu_hotplug_disable
being true. Throwing a more specific error message for this case,
instead of just "Failed to offline CPU", makes it clearer that the error
is in fact a known error situation instead of other generic/unknown
cause.
This patch adds a 'last online' check in dlpar_cpu_offline() to catch
the 'last online CPU' offline error, eturning a more informative error
message:
pseries-hotplug-cpu: Unable to remove last online CPU PowerPC,POWER9
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210323205056.52768-2-danielhb413@gmail.com
Randy Dunlap [Thu, 25 Mar 2021 20:08:20 +0000 (13:08 -0700)]
selftests/powerpc: unmark non-kernel-doc comments
Drop the 'beginning of kernel-doc' notation markers (/**)
in places that are not in kernel-doc format.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210325200820.16594-1-rdunlap@infradead.org
Bhaskar Chowdhury [Mon, 22 Mar 2021 02:33:07 +0000 (08:03 +0530)]
cxl: Fix couple of spellings
s/filesytem/filesystem/
s/symantics/semantics/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210322023307.168754-1-unixbhaskar@gmail.com
Christophe Leroy [Fri, 19 Mar 2021 06:34:43 +0000 (06:34 +0000)]
powerpc/irq: Inline call_do_irq() and call_do_softirq()
call_do_irq() and call_do_softirq() are simple enough to be
worth inlining.
Inlining them avoids an mflr/mtlr pair plus a save/reload on stack.
This is inspired from S390 arch. Several other arches do more or
less the same. The way sparc arch does seems odd thought.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210320122227.345427-1-mpe@ellerman.id.au
He Ying [Tue, 16 Mar 2021 04:11:48 +0000 (00:11 -0400)]
powerpc/setup_64: Fix sparse warnings
Sparse warns:
warning: symbol 'rfi_flush' was not declared.
warning: symbol 'entry_flush' was not declared.
warning: symbol 'uaccess_flush' was not declared.
Define 'entry_flush' and 'uaccess_flush' as static because they are
not referenced outside the file. Include asm/security_features.h in
which 'rfi_flush' is declared.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: He Ying <heying24@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316041148.29694-1-heying24@huawei.com
Christophe Leroy [Thu, 18 Mar 2021 17:25:07 +0000 (17:25 +0000)]
powerpc/embedded6xx: Remove CONFIG_MV64X60
Commit
92c8c16f3457 ("powerpc/embedded6xx: Remove C2K board support")
moved the last selector of CONFIG_MV64X60.
As it is not a user selectable config, it can be removed.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/19e57d16692dcd1ca67ba880d7273a57fab416aa.1616085654.git.christophe.leroy@csgroup.eu
kernel test robot [Thu, 18 Mar 2021 23:44:41 +0000 (07:44 +0800)]
powerpc/iommu/debug: fix ifnullfree.cocci warnings
arch/powerpc/kernel/iommu.c:76:2-16: WARNING: NULL check before some freeing functions is not needed.
NULL check before some freeing functions is not needed.
Based on checkpatch warning
"kfree(NULL) is safe this check is probably not required"
and kfreeaddr.cocci by Julia Lawall.
Generated by: scripts/coccinelle/free/ifnullfree.cocci
Fixes:
691602aab9c3 ("powerpc/iommu/debug: Add debugfs entries for IOMMU tables")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210318234441.GA63469@f8e20a472e81
Christophe Leroy [Tue, 16 Mar 2021 07:57:16 +0000 (07:57 +0000)]
powerpc: Fix arch_stack_walk() to have running function as first entry
It seems like other architectures, namely x86 and arm64 and riscv
at least, include the running function as top entry when saving
stack trace with save_stack_trace_regs().
Functionnalities like KFENCE expect it.
Do the same on powerpc, it allows KFENCE and other users to
properly identify the faulting function as depicted below.
Before the patch KFENCE was identifying finish_task_switch.isra
as the faulting function.
[ 14.937370] ==================================================================
[ 14.948692] BUG: KFENCE: invalid read in test_invalid_access+0x54/0x108
[ 14.948692]
[ 14.956814] Invalid read at 0xdf98800a:
[ 14.960664] test_invalid_access+0x54/0x108
[ 14.964876] finish_task_switch.isra.0+0x54/0x23c
[ 14.969606] kunit_try_run_case+0x5c/0xd0
[ 14.973658] kunit_generic_run_threadfn_adapter+0x24/0x30
[ 14.979079] kthread+0x15c/0x174
[ 14.982342] ret_from_kernel_thread+0x14/0x1c
[ 14.986731]
[ 14.988236] CPU: 0 PID: 111 Comm: kunit_try_catch Tainted: G B 5.12.0-rc1-01537-g95f6e2088d7e-dirty #4682
[ 14.999795] NIP:
c016ec2c LR:
c02f517c CTR:
c016ebd8
[ 15.004851] REGS:
e2449d90 TRAP: 0301 Tainted: G B (5.12.0-rc1-01537-g95f6e2088d7e-dirty)
[ 15.015274] MSR:
00009032 <EE,ME,IR,DR,RI> CR:
22000004 XER:
00000000
[ 15.022043] DAR:
df98800a DSISR:
20000000
[ 15.022043] GPR00:
c02f517c e2449e50 c1142080 e100dd24 c084b13c 00000008 c084b32b c016ebd8
[ 15.022043] GPR08:
c0850000 df988000 c0d10000 e2449eb0 22000288
[ 15.040581] NIP [
c016ec2c] test_invalid_access+0x54/0x108
[ 15.046010] LR [
c02f517c] kunit_try_run_case+0x5c/0xd0
[ 15.051181] Call Trace:
[ 15.053637] [
e2449e50] [
c005a68c] finish_task_switch.isra.0+0x54/0x23c (unreliable)
[ 15.061338] [
e2449eb0] [
c02f517c] kunit_try_run_case+0x5c/0xd0
[ 15.067215] [
e2449ed0] [
c02f648c] kunit_generic_run_threadfn_adapter+0x24/0x30
[ 15.074472] [
e2449ef0] [
c004e7b0] kthread+0x15c/0x174
[ 15.079571] [
e2449f30] [
c001317c] ret_from_kernel_thread+0x14/0x1c
[ 15.085798] Instruction dump:
[ 15.088784]
8129d608 38e7ebd8 81020280 911f004c 39000000 995f0024 907f0028 90ff001c
[ 15.096613]
3949000a 915f0020 3d40c0d1 3d00c085 <
8929000a>
3908adb0 812a4b98 3d40c02f
[ 15.104612] ==================================================================
Fixes:
35de3b1aa168 ("powerpc: Implement save_stack_trace_regs() to enable kprobe stack tracing")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/21324f9e2f21d1640c8397b4d1d857a9355a2283.1615881400.git.christophe.leroy@csgroup.eu
Christophe Leroy [Tue, 16 Mar 2021 07:57:15 +0000 (07:57 +0000)]
powerpc: Convert stacktrace to generic ARCH_STACKWALK
This patch converts powerpc stacktrace to the generic ARCH_STACKWALK
implemented by commit
214d8ca6ee85 ("stacktrace: Provide common
infrastructure")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/73b36bbb101299760b95ecd2cd3a46554bea8bf9.1615881400.git.christophe.leroy@csgroup.eu
Christophe Leroy [Tue, 16 Mar 2021 07:57:14 +0000 (07:57 +0000)]
powerpc: Rename 'tsk' parameter into 'task'
To better match generic code, rename 'tsk' to 'task' in
some stacktrace functions in preparation of following
patch which converts powerpc to generic ARCH_STACKWALK.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/117f0200e11961af6c0fdf85c98373e5dcf96a47.1615881400.git.christophe.leroy@csgroup.eu
Christophe Leroy [Tue, 16 Mar 2021 07:57:13 +0000 (07:57 +0000)]
powerpc: Activate HAVE_RELIABLE_STACKTRACE for all
CONFIG_HAVE_RELIABLE_STACKTRACE is applicable to all, no
reason to limit it to book3s/64le
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/955248c6423cb068c5965923121ba31d4dd2fdde.1615881400.git.christophe.leroy@csgroup.eu
Aneesh Kumar K.V [Thu, 18 Mar 2021 03:48:29 +0000 (09:18 +0530)]
powerpc/book3s64/kuap: Move Kconfig varriables to BOOK3S_64
With below two commits:
commit
c91435d95c49 ("powerpc/book3s64/hash/kuep: Enable KUEP on hash")
commit
b2ff33a10c8b ("powerpc/book3s64/hash/kuap: Enable kuap on hash")
the kernel now supports kuap/kuep with hash translation. Hence select the
Kconfig even when radix is disabled.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210318034829.72255-1-aneesh.kumar@linux.ibm.com
Bhaskar Chowdhury [Wed, 17 Mar 2021 09:04:13 +0000 (14:34 +0530)]
powerpc/kernel: Trivial typo fix in kgdb.c
s/procesing/processing/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210317090413.120891-1-unixbhaskar@gmail.com
Nicholas Piggin [Tue, 16 Mar 2021 10:52:05 +0000 (20:52 +1000)]
powerpc/64s: Fix hash fault to use TRAP accessor
Hash faults use the trap vector to decide whether this is an
instruction or data fault. This should use the TRAP accessor
rather than open access regs->trap.
This won't cause a problem at the moment because 64s only uses
trap flags for system call interrupts (the norestart flag), but
that could change if any other trap flags get used in future.
Fixes:
a4922f5442e7e ("powerpc/64s: move the hash fault handling logic to C")
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316105205.407767-1-npiggin@gmail.com
Christophe Leroy [Mon, 15 Mar 2021 14:52:51 +0000 (14:52 +0000)]
powerpc/mm: Remove unneeded #ifdef CONFIG_PPC_MEM_KEYS
In fault.c, #ifdef CONFIG_PPC_MEM_KEYS is not needed because all
functions are always defined, and arch_vma_access_permitted()
always returns true when CONFIG_PPC_MEM_KEYS is not defined so
access_pkey_error() will return false so bad_access_pkey()
will never be called.
Include linux/pkeys.h to get a definition of vma_pkeys() for
bad_access_pkey().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8038392f38d81f2ad169347efac29146f553b238.1615819955.git.christophe.leroy@csgroup.eu
Michael Ellerman [Sun, 14 Mar 2021 09:33:41 +0000 (20:33 +1100)]
powerpc/fsl-pci: Fix section mismatch warning
Section mismatch in reference from the function .fsl_add_bridge() to
the function .init.text:.setup_pci_cmd()
fsl_add_bridge() is not __init, and can't be, and is the only caller
of setup_pci_cmd(). Fix it by making setup_pci_cmd() non-init.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210314093341.132986-1-mpe@ellerman.id.au
Michael Ellerman [Sun, 14 Mar 2021 09:33:33 +0000 (20:33 +1100)]
powerpc: Fix section mismatch warning in smp_setup_pacas()
Section mismatch in reference from the function .smp_setup_pacas() to
the function .init.text:.allocate_paca()
The only caller of smp_setup_pacas() is setup_arch() which is __init,
so mark smp_setup_pacas() __init.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210314093333.132657-1-mpe@ellerman.id.au
Michael Ellerman [Sun, 14 Mar 2021 09:33:20 +0000 (20:33 +1100)]
powerpc/64s: Fold update_current_thread_[i]amr() into their only callers
lkp reported warnings in some configuration due to
update_current_thread_amr() being unused:
arch/powerpc/mm/book3s64/pkeys.c:284:20: error: unused function 'update_current_thread_amr'
static inline void update_current_thread_amr(u64 value)
Which is because it's only use is inside an ifdef. We could move it
inside the ifdef, but it's a single line function and only has one
caller, so just fold it in.
Similarly update_current_thread_iamr() is small and only called once,
so fold it in also.
Fixes:
48a8ab4eeb82 ("powerpc/book3s64/pkeys: Don't update SPRN_AMR when in kernel mode.")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210314093320.132331-1-mpe@ellerman.id.au
Michael Ellerman [Sun, 14 Mar 2021 09:33:00 +0000 (20:33 +1100)]
powerpc/eeh: Fix build failure with CONFIG_PROC_FS=n
The build fails with CONFIG_PROC_FS=n:
arch/powerpc/kernel/eeh.c:1571:12: error: ‘proc_eeh_show’ defined but not used
1571 | static int proc_eeh_show(struct seq_file *m, void *v)
Wrap proc_eeh_show() in an ifdef to avoid it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210314093300.131998-1-mpe@ellerman.id.au
Jiapeng Chong [Mon, 15 Mar 2021 07:35:24 +0000 (15:35 +0800)]
powerpc/pci: fix warning comparing pointer to 0
Fix the following coccicheck warning:
./arch/powerpc/platforms/maple/pci.c:37:16-17: WARNING comparing pointer
to 0.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1615793724-97015-1-git-send-email-jiapeng.chong@linux.alibaba.com
Yang Li [Mon, 15 Mar 2021 07:24:56 +0000 (15:24 +0800)]
powerpc/xive: use true and false for bool variable
fixed the following coccicheck:
./arch/powerpc/sysdev/xive/spapr.c:552:8-9: WARNING: return of 0/1 in
function 'xive_spapr_match' with return type bool
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1615793096-83758-1-git-send-email-yang.lee@linux.alibaba.com
Christophe Leroy [Mon, 15 Mar 2021 11:01:26 +0000 (11:01 +0000)]
powerpc/asm-offsets: GPR14 is not needed either
Commit
aac6a91fea93 ("powerpc/asm: Remove unused symbols in
asm-offsets.c") removed GPR15 to GPR31 but kept GPR14,
probably because it pops up in a couple of comments when doing
a grep.
However, it was never used either, so remove it as well.
Fixes:
aac6a91fea93 ("powerpc/asm: Remove unused symbols in asm-offsets.c")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9881c68fbca004f9ea18fc9473f630e11ccd6417.1615806071.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 15 Mar 2021 12:00:09 +0000 (12:00 +0000)]
powerpc/math: Fix missing __user qualifier for get_user() and other sparse warnings
Sparse reports the following problems:
arch/powerpc/math-emu/math.c:228:21: warning: Using plain integer as NULL pointer
arch/powerpc/math-emu/math.c:228:31: warning: Using plain integer as NULL pointer
arch/powerpc/math-emu/math.c:228:41: warning: Using plain integer as NULL pointer
arch/powerpc/math-emu/math.c:228:51: warning: Using plain integer as NULL pointer
arch/powerpc/math-emu/math.c:237:13: warning: incorrect type in initializer (different address spaces)
arch/powerpc/math-emu/math.c:237:13: expected unsigned int [noderef] __user *_gu_addr
arch/powerpc/math-emu/math.c:237:13: got unsigned int [usertype] *
arch/powerpc/math-emu/math.c:226:1: warning: symbol 'do_mathemu' was not declared. Should it be static?
Add missing __user qualifier when casting pointer used in get_user()
Use NULL instead of 0 to initialise opX local variables.
Add a prototype for do_mathemu() (Added in processor.h like sparc)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e4d1aae7604d89c98a52dfd8ce8443462e595670.1615809591.git.christophe.leroy@csgroup.eu
Bhaskar Chowdhury [Fri, 12 Mar 2021 11:25:37 +0000 (16:55 +0530)]
powerpc/mm/book3s64: Fix a typo in mmu_context.c
s/detalis/details/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210312112537.4585-1-unixbhaskar@gmail.com
Bhaskar Chowdhury [Sun, 14 Mar 2021 22:04:36 +0000 (03:34 +0530)]
powerpc/64e: Trivial spelling fixes throughout head_fsl_booke.S
Trivial spelling fixes throughout the file.
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210314220436.3417083-1-unixbhaskar@gmail.com
Christophe Leroy [Wed, 10 Mar 2021 12:43:12 +0000 (12:43 +0000)]
powerpc/Makefile: Remove workaround for gcc versions below 4.9
Commit
6ec4476ac825 ("Raise gcc version requirement to 4.9")
made it impossible to build with gcc 4.8 and under.
Remove related workaround.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a1e552006b8c51f23edd2f6cabdd9a986c631146.1615380184.git.christophe.leroy@csgroup.eu