review.tizen.org Git - platform/kernel/linux-starfive.git/log

mm: kmem: fix a NULL pointer dereference in obj_stock_flush_required()

commit 3b8abb3239530c423c0b97e42af7f7e856e1ee96 upstream.

KCSAN found an issue in obj_stock_flush_required():
stock->cached_objcg can be reset between the check and dereference:

==================================================================
BUG: KCSAN: data-race in drain_all_stock / drain_obj_stock

write to 0xffff888237c2a2f8 of 8 bytes by task 19625 on cpu 0:
drain_obj_stock+0x408/0x4e0 mm/memcontrol.c:3306
refill_obj_stock+0x9c/0x1e0 mm/memcontrol.c:3340
obj_cgroup_uncharge+0xe/0x10 mm/memcontrol.c:3408
memcg_slab_free_hook mm/slab.h:587 [inline]
__cache_free mm/slab.c:3373 [inline]
__do_kmem_cache_free mm/slab.c:3577 [inline]
kmem_cache_free+0x105/0x280 mm/slab.c:3602
__d_free fs/dcache.c:298 [inline]
dentry_free fs/dcache.c:375 [inline]
__dentry_kill+0x422/0x4a0 fs/dcache.c:621
dentry_kill+0x8d/0x1e0
dput+0x118/0x1f0 fs/dcache.c:913
__fput+0x3bf/0x570 fs/file_table.c:329
____fput+0x15/0x20 fs/file_table.c:349
task_work_run+0x123/0x160 kernel/task_work.c:179
resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
exit_to_user_mode_loop+0xcf/0xe0 kernel/entry/common.c:171
exit_to_user_mode_prepare+0x6a/0xa0 kernel/entry/common.c:203
__syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
syscall_exit_to_user_mode+0x26/0x140 kernel/entry/common.c:296
do_syscall_64+0x4d/0xc0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read to 0xffff888237c2a2f8 of 8 bytes by task 19632 on cpu 1:
obj_stock_flush_required mm/memcontrol.c:3319 [inline]
drain_all_stock+0x174/0x2a0 mm/memcontrol.c:2361
try_charge_memcg+0x6d0/0xd10 mm/memcontrol.c:2703
try_charge mm/memcontrol.c:2837 [inline]
mem_cgroup_charge_skmem+0x51/0x140 mm/memcontrol.c:7290
sock_reserve_memory+0xb1/0x390 net/core/sock.c:1025
sk_setsockopt+0x800/0x1e70 net/core/sock.c:1525
udp_lib_setsockopt+0x99/0x6c0 net/ipv4/udp.c:2692
udp_setsockopt+0x73/0xa0 net/ipv4/udp.c:2817
sock_common_setsockopt+0x61/0x70 net/core/sock.c:3668
__sys_setsockopt+0x1c3/0x230 net/socket.c:2271
__do_sys_setsockopt net/socket.c:2282 [inline]
__se_sys_setsockopt net/socket.c:2279 [inline]
__x64_sys_setsockopt+0x66/0x80 net/socket.c:2279
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0xffff8881382d52c0 -> 0xffff888138893740

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 19632 Comm: syz-executor.0 Not tainted 6.3.0-rc2-syzkaller-00387-g534293368afa #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023

Fix it by using READ_ONCE()/WRITE_ONCE() for all accesses to
stock->cached_objcg.

Link: https://lkml.kernel.org/r/20230502160839.361544-1-roman.gushchin@linux.dev
Fixes: bf4f059954dc ("mm: memcg/slab: obj_cgroup API")
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Reported-by: syzbot+774c29891415ab0fd29d@syzkaller.appspotmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/linux-mm/CACT4Y+ZfucZhM60YPphWiCLJr6+SGFhT+jjm8k1P-a_8Kkxsjg@mail.gmail.com/T/#t
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

file: reinstate f_pos locking optimization for regular files

commit 797964253d358cf8d705614dda394dbe30120223 upstream.

In commit 20ea1e7d13c1 ("file: always lock position for
FMODE_ATOMIC_POS") we ended up always taking the file pos lock, because
pidfd_getfd() could get a reference to the file even when it didn't have
an elevated file count due to threading of other sharing cases.

But Mateusz Guzik reports that the extra locking is actually measurable,
so let's re-introduce the optimization, and only force the locking for
directory traversal.

Directories need the lock for correctness reasons, while regular files
only need it for "POSIX semantics". Since pidfd_getfd() is about
debuggers etc special things that are _way_ outside of POSIX, we can
relax the rules for that case.

Reported-by: Mateusz Guzik <mjguzik@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/linux-fsdevel/20230803095311.ijpvhx3fyrbkasul@f/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf, cpumap: Make sure kthread is running before map update returns

commit 640a604585aa30f93e39b17d4d6ba69fcb1e66c9 upstream.

The following warning was reported when running stress-mode enabled
xdp_redirect_cpu with some RT threads:

  ------------[ cut here ]------------
  WARNING: CPU: 4 PID: 65 at kernel/bpf/cpumap.c:135
  CPU: 4 PID: 65 Comm: kworker/4:1 Not tainted 6.5.0-rc2+ #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
  Workqueue: events cpu_map_kthread_stop
  RIP: 0010:put_cpu_map_entry+0xda/0x220
  ......
  Call Trace:
   <TASK>
   ? show_regs+0x65/0x70
   ? __warn+0xa5/0x240
   ......
   ? put_cpu_map_entry+0xda/0x220
   cpu_map_kthread_stop+0x41/0x60
   process_one_work+0x6b0/0xb80
   worker_thread+0x96/0x720
   kthread+0x1a5/0x1f0
   ret_from_fork+0x3a/0x70
   ret_from_fork_asm+0x1b/0x30
   </TASK>

The root cause is the same as commit 436901649731 ("bpf: cpumap: Fix memory
leak in cpu_map_update_elem"). The kthread is stopped prematurely by
kthread_stop() in cpu_map_kthread_stop(), and kthread() doesn't call
cpu_map_kthread_run() at all but XDP program has already queued some
frames or skbs into ptr_ring. So when __cpu_map_ring_cleanup() checks
the ptr_ring, it will find it was not emptied and report a warning.

An alternative fix is to use __cpu_map_ring_cleanup() to drop these
pending frames or skbs when kthread_stop() returns -EINTR, but it may
confuse the user, because these frames or skbs have been handled
correctly by XDP program. So instead of dropping these frames or skbs,
just make sure the per-cpu kthread is running before
__cpu_map_entry_alloc() returns.

After apply the fix, the error handle for kthread_stop() will be
unnecessary because it will always return 0, so just remove it.

Fixes: 6710e1126934 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230729095107.1722450-2-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: imx93: Propagate correct error in imx93_clocks_probe()

commit a29b2fccf5f2689a9637be85ff1f51c834c6fb33 upstream.

smatch reports:

drivers/clk/imx/clk-imx93.c:294 imx93_clocks_probe() error: uninitialized symbol 'base'.

Indeed, in case of an error, the wrong (yet uninitialized) variable is
converted to an error code and returned.
Fix this by propagating the error code in the correct variable.

Fixes: e02ba11b45764705 ("clk: imx93: fix memory leak and missing unwind goto in imx93_clocks_probe")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/9c2acd81-3ad8-485d-819e-9e4201277831@kadam.mountain
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/all/202306161533.4YDmL22b-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230711150812.3562221-1-geert+renesas@glider.be
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/gt: Cleanup aux invalidation registers

commit d14560ac1b595aa2e792365e91fea6aeaee66c2b upstream.

Fix the 'NV' definition postfix that is supposed to be INV.

Take the chance to also order properly the registers based on
their address and call the GEN12_GFX_CCS_AUX_INV address as
GEN12_CCS_AUX_INV like all the other similar registers.

Remove also VD1, VD3 and VE1 registers that don't exist and add
BCS0 and CCS0.

Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230725001950.1014671-2-andi.shyti@linux.intel.com
(cherry picked from commit 2f0b927d3ca3440445975ebde27f3df1c3ed6f76)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Fix premature release of request's reusable memory

commit a337b64f0d5717248a0c894e2618e658e6a9de9f upstream.

Infinite waits for completion of GPU activity have been observed in CI,
mostly inside __i915_active_wait(), triggered by igt@gem_barrier_race or
igt@perf@stress-open-close.  Root cause analysis, based of ftrace dumps
generated with a lot of extra trace_printk() calls added to the code,
revealed loops of request dependencies being accidentally built,
preventing the requests from being processed, each waiting for completion
of another one's activity.

After we substitute a new request for a last active one tracked on a
timeline, we set up a dependency of our new request to wait on completion
of current activity of that previous one.  While doing that, we must take
care of keeping the old request still in memory until we use its
attributes for setting up that await dependency, or we can happen to set
up the await dependency on an unrelated request that already reuses the
memory previously allocated to the old one, already released.  Combined
with perf adding consecutive kernel context remote requests to different
user context timelines, unresolvable loops of await dependencies can be
built, leading do infinite waits.

We obtain a pointer to the previous request to wait upon when we
substitute it with a pointer to our new request in an active tracker,
e.g. in intel_timeline.last_request.  In some processing paths we protect
that old request from being freed before we use it by getting a reference
to it under RCU protection, but in others, e.g.  __i915_request_commit()
-> __i915_request_add_to_timeline() -> __i915_request_ensure_ordering(),
we don't.  But anyway, since the requests' memory is SLAB_FAILSAFE_BY_RCU,
that RCU protection is not sufficient against reuse of memory.

We could protect i915_request's memory from being prematurely reused by
calling its release function via call_rcu() and using rcu_read_lock()
consequently, as proposed in v1.  However, that approach leads to
significant (up to 10 times) increase of SLAB utilization by i915_request
SLAB cache.  Another potential approach is to take a reference to the
previous active fence.

When updating an active fence tracker, we first lock the new fence,
substitute a pointer of the current active fence with the new one, then we
lock the substituted fence.  With this approach, there is a time window
after the substitution and before the lock when the request can be
concurrently released by an interrupt handler and its memory reused, then
we may happen to lock and return a new, unrelated request.

Always get a reference to the current active fence first, before
replacing it with a new one.  Having it protected from premature release
and reuse, lock it and then replace with the new one but only if not
yet signalled via a potential concurrent interrupt nor replaced with
another one by a potential concurrent thread, otherwise retry, starting
from getting a reference to the new current one.  Adjust users to not
get a reference to the previous active fence themselves and always put the
reference got by __i915_active_fence_set() when no longer needed.

v3: Fix lockdep splat reports and other issues caused by incorrect use of
    try_cmpxchg() (use (cmpxchg() != prev) instead)
v2: Protect request's memory by getting a reference to it in favor of
    delegating its release to call_rcu() (Chris)

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8211
Fixes: df9f85d8582e ("drm/i915: Serialise i915_active_fence_set() with itself")
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230720093543.832147-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 946e047a3d88d46d15b5c5af0414098e12b243f7)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ttm: check null pointer before accessing when swapping

commit 2dedcf414bb01b8d966eb445db1d181d92304fb2 upstream.

Add a check to avoid null pointer dereference as below:

[   90.002283] general protection fault, probably for non-canonical
address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
[   90.002292] KASAN: null-ptr-deref in range
[0x0000000000000000-0x0000000000000007]
[   90.002346]  ? exc_general_protection+0x159/0x240
[   90.002352]  ? asm_exc_general_protection+0x26/0x30
[   90.002357]  ? ttm_bo_evict_swapout_allowable+0x322/0x5e0 [ttm]
[   90.002365]  ? ttm_bo_evict_swapout_allowable+0x42e/0x5e0 [ttm]
[   90.002373]  ttm_bo_swapout+0x134/0x7f0 [ttm]
[   90.002383]  ? __pfx_ttm_bo_swapout+0x10/0x10 [ttm]
[   90.002391]  ? lock_acquire+0x44d/0x4f0
[   90.002398]  ? ttm_device_swapout+0xa5/0x260 [ttm]
[   90.002412]  ? lock_acquired+0x355/0xa00
[   90.002416]  ? do_raw_spin_trylock+0xb6/0x190
[   90.002421]  ? __pfx_lock_acquired+0x10/0x10
[   90.002426]  ? ttm_global_swapout+0x25/0x210 [ttm]
[   90.002442]  ttm_device_swapout+0x198/0x260 [ttm]
[   90.002456]  ? __pfx_ttm_device_swapout+0x10/0x10 [ttm]
[   90.002472]  ttm_global_swapout+0x75/0x210 [ttm]
[   90.002486]  ttm_tt_populate+0x187/0x3f0 [ttm]
[   90.002501]  ttm_bo_handle_move_mem+0x437/0x590 [ttm]
[   90.002517]  ttm_bo_validate+0x275/0x430 [ttm]
[   90.002530]  ? __pfx_ttm_bo_validate+0x10/0x10 [ttm]
[   90.002544]  ? kasan_save_stack+0x33/0x60
[   90.002550]  ? kasan_set_track+0x25/0x30
[   90.002554]  ? __kasan_kmalloc+0x8f/0xa0
[   90.002558]  ? amdgpu_gtt_mgr_new+0x81/0x420 [amdgpu]
[   90.003023]  ? ttm_resource_alloc+0xf6/0x220 [ttm]
[   90.003038]  amdgpu_bo_pin_restricted+0x2dd/0x8b0 [amdgpu]
[   90.003210]  ? __x64_sys_ioctl+0x131/0x1a0
[   90.003210]  ? do_syscall_64+0x60/0x90

Fixes: a2848d08742c ("drm/ttm: never consider pinned BOs for eviction&swap")
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20230724024229.1118444-1-guchun.chen@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

open: make RESOLVE_CACHED correctly test for O_TMPFILE

commit a0fc452a5d7fed986205539259df1d60546f536c upstream.

O_TMPFILE is actually __O_TMPFILE|O_DIRECTORY. This means that the old
fast-path check for RESOLVE_CACHED would reject all users passing
O_DIRECTORY with -EAGAIN, when in fact the intended test was to check
for __O_TMPFILE.

Cc: stable@vger.kernel.org # v5.12+
Fixes: 99668f618062 ("fs: expose LOOKUP_CACHED through openat2() RESOLVE_CACHED")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Message-Id: <20230806-resolve_cached-o_tmpfile-v1-1-7ba16308465e@cyphar.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64/fpsimd: Sync FPSIMD state with SVE for SME only systems

commit 507ea5dd92d23fcf10e4d1a68a443c86a49753ed upstream.

Currently we guard FPSIMD/SVE state conversions with a check for the system
supporting SVE but SME only systems may need to sync streaming mode SVE
state so add a check for SME support too. These functions are only used
by the ptrace code.

Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-ssve-no-sve-v1-2-49df214bfb3e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64/fpsimd: Clear SME state in the target task when setting the VL

commit c9bb40b7f786662e33d71afe236442b0b61f0446 upstream.

When setting SME vector lengths we clear TIF_SME to reenable SME traps,
doing a reallocation of the backing storage on next use. We do this using
clear_thread_flag() which operates on the current thread, meaning that when
setting the vector length via ptrace we may both not force traps for the
target task and force a spurious flush of any SME state that the tracing
task may have.

Clear the flag in the target task.

Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Reported-by: David Spickett <David.Spickett@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-tif-sme-v1-1-88312fd6fbfd@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64/fpsimd: Sync and zero pad FPSIMD state for streaming SVE

commit 69af56ae56a48a2522aad906c4461c6c7c092737 upstream.

We have a function sve_sync_from_fpsimd_zeropad() which is used by the
ptrace code to update the SVE state when the user writes to the the
FPSIMD register set. Currently this checks that the task has SVE
enabled but this will miss updates for tasks which have streaming SVE
enabled if SVE has not been enabled for the thread, also do the
conversion if the task has streaming SVE enabled.

Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-ssve-no-sve-v1-3-49df214bfb3e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/ftrace: Create a dummy stackframe to fix stack unwind

commit 41a506ef71eb38d94fe133f565c87c3e06ccc072 upstream.

With ppc64 -mprofile-kernel and ppc32 -pg, profiling instructions to
call into ftrace are emitted right at function entry. The instruction
sequence used is minimal to reduce overhead. Crucially, a stackframe is
not created for the function being traced. This breaks stack unwinding
since the function being traced does not have a stackframe for itself.
As such, it never shows up in the backtrace:

/sys/kernel/debug/tracing # echo 1 > /proc/sys/kernel/stack_tracer_enabled
/sys/kernel/debug/tracing # cat stack_trace
        Depth    Size   Location    (17 entries)
        -----    ----   --------
  0)     4144      32   ftrace_call+0x4/0x44
  1)     4112     432   get_page_from_freelist+0x26c/0x1ad0
  2)     3680     496   __alloc_pages+0x290/0x1280
  3)     3184     336   __folio_alloc+0x34/0x90
  4)     2848     176   vma_alloc_folio+0xd8/0x540
  5)     2672     272   __handle_mm_fault+0x700/0x1cc0
  6)     2400     208   handle_mm_fault+0xf0/0x3f0
  7)     2192      80   ___do_page_fault+0x3e4/0xbe0
  8)     2112     160   do_page_fault+0x30/0xc0
  9)     1952     256   data_access_common_virt+0x210/0x220
10)     1696     400   0xc00000000f16b100
11)     1296     384   load_elf_binary+0x804/0x1b80
12)      912     208   bprm_execve+0x2d8/0x7e0
13)      704      64   do_execveat_common+0x1d0/0x2f0
14)      640     160   sys_execve+0x54/0x70
15)      480      64   system_call_exception+0x138/0x350
16)      416     416   system_call_common+0x160/0x2c4

Fix this by having ftrace create a dummy stackframe for the function
being traced. With this, backtraces now capture the function being
traced:

/sys/kernel/debug/tracing # cat stack_trace
        Depth    Size   Location    (17 entries)
        -----    ----   --------
  0)     3888      32   _raw_spin_trylock+0x8/0x70
  1)     3856     576   get_page_from_freelist+0x26c/0x1ad0
  2)     3280      64   __alloc_pages+0x290/0x1280
  3)     3216     336   __folio_alloc+0x34/0x90
  4)     2880     176   vma_alloc_folio+0xd8/0x540
  5)     2704     416   __handle_mm_fault+0x700/0x1cc0
  6)     2288      96   handle_mm_fault+0xf0/0x3f0
  7)     2192      48   ___do_page_fault+0x3e4/0xbe0
  8)     2144     192   do_page_fault+0x30/0xc0
  9)     1952     608   data_access_common_virt+0x210/0x220
10)     1344      16   0xc0000000334bbb50
11)     1328     416   load_elf_binary+0x804/0x1b80
12)      912      64   bprm_execve+0x2d8/0x7e0
13)      848     176   do_execveat_common+0x1d0/0x2f0
14)      672     192   sys_execve+0x54/0x70
15)      480      64   system_call_exception+0x138/0x350
16)      416     416   system_call_common+0x160/0x2c4

This results in two additional stores in the ftrace entry code, but
produces reliable backtraces.

Fixes: 153086644fd1 ("powerpc/ftrace: Add support for -mprofile-kernel ftrace ABI")
Cc: stable@vger.kernel.org
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230621051349.759567-1-naveen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Disable preemption in bpf_event_output

commit d62cc390c2e99ae267ffe4b8d7e2e08b6c758c32 upstream.

We received report [1] of kernel crash, which is caused by
using nesting protection without disabled preemption.

The bpf_event_output can be called by programs executed by
bpf_prog_run_array_cg function that disabled migration but
keeps preemption enabled.

This can cause task to be preempted by another one inside the
nesting protection and lead eventually to two tasks using same
perf_sample_data buffer and cause crashes like:

  BUG: kernel NULL pointer dereference, address: 0000000000000001
  #PF: supervisor instruction fetch in kernel mode
  #PF: error_code(0x0010) - not-present page
  ...
  ? perf_output_sample+0x12a/0x9a0
  ? finish_task_switch.isra.0+0x81/0x280
  ? perf_event_output+0x66/0xa0
  ? bpf_event_output+0x13a/0x190
  ? bpf_event_output_data+0x22/0x40
  ? bpf_prog_dfc84bbde731b257_cil_sock4_connect+0x40a/0xacb
  ? xa_load+0x87/0xe0
  ? __cgroup_bpf_run_filter_sock_addr+0xc1/0x1a0
  ? release_sock+0x3e/0x90
  ? sk_setsockopt+0x1a1/0x12f0
  ? udp_pre_connect+0x36/0x50
  ? inet_dgram_connect+0x93/0xa0
  ? __sys_connect+0xb4/0xe0
  ? udp_setsockopt+0x27/0x40
  ? __pfx_udp_push_pending_frames+0x10/0x10
  ? __sys_setsockopt+0xdf/0x1a0
  ? __x64_sys_connect+0xf/0x20
  ? do_syscall_64+0x3a/0x90
  ? entry_SYSCALL_64_after_hwframe+0x72/0xdc

Fixing this by disabling preemption in bpf_event_output.

[1] https://github.com/cilium/cilium/issues/26756
Cc: stable@vger.kernel.org
Reported-by: Oleg "livelace" Popov <o.popov@livelace.ru>
Closes: https://github.com/cilium/cilium/issues/26756
Fixes: 2a916f2f546c ("bpf: Use migrate_disable/enable in array macros and cgroup/lirc code.")
Acked-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230725084206.580930-3-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rbd: prevent busy loop when requesting exclusive lock

commit 9d01e07fd1bfb4daae156ab528aa196f5ac2b2bc upstream.

Due to rbd_try_acquire_lock() effectively swallowing all but
EBLOCKLISTED error from rbd_try_lock() ("request lock anyway") and
rbd_request_lock() returning ETIMEDOUT error not only for an actual
notify timeout but also when the lock owner doesn't respond, a busy
loop inside of rbd_acquire_lock() between rbd_try_acquire_lock() and
rbd_request_lock() is possible.

Requesting the lock on EBUSY error (returned by get_lock_owner_info()
if an incompatible lock or invalid lock owner is detected) makes very
little sense. The same goes for ETIMEDOUT error (might pop up pretty
much anywhere if osd_request_timeout option is set) and many others.

Just fail I/O requests on rbd_dev->acquiring_list immediately on any
error from rbd_try_lock().

Cc: stable@vger.kernel.org # 588159009d5b: rbd: retrieve and check lock owner twice before blocklisting
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/hyperv: Disable IBT when hypercall page lacks ENDBR instruction

commit d5ace2a776442d80674eff9ed42e737f7dd95056 upstream.

On hardware that supports Indirect Branch Tracking (IBT), Hyper-V VMs
with ConfigVersion 9.3 or later support IBT in the guest. However,
current versions of Hyper-V have a bug in that there's not an ENDBR64
instruction at the beginning of the hypercall page. Since hypercalls are
made with an indirect call to the hypercall page, all hypercall attempts
fail with an exception and Linux panics.

A Hyper-V fix is in progress to add ENDBR64. But guard against the Linux
panic by clearing X86_FEATURE_IBT if the hypercall page doesn't start
with ENDBR. The VM will boot and run without IBT.

If future Linux 32-bit kernels were to support IBT, additional hypercall
page hackery would be needed to make IBT work for such kernels in a
Hyper-V VM.

Cc: stable@vger.kernel.org
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1690001476-98594-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: mt76: mt7615: do not advertise 5 GHz on first phy of MT7615D (DBDC)

commit 421033deb91521aa6a9255e495cb106741a52275 upstream.

On DBDC devices the first (internal) phy is only capable of using
2.4 GHz band, and the 5 GHz band is exposed via a separate phy object,
so avoid the false advertising.

Reported-by: Rani Hod <rani.hod@gmail.com>
Closes: https://github.com/openwrt/openwrt/pull/12361
Fixes: 7660a1bd0c22 ("mt76: mt7615: register ext_phy if DBDC is detected")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230605073408.8699-1-fercerpav@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: tap_open(): set sk_uid from current_fsuid()

commit 5c9241f3ceab3257abe2923a59950db0dc8bb737 upstream.

Commit 66b2c338adce initializes the "sk_uid" field in the protocol socket
(struct sock) from the "/dev/tapX" device node's owner UID. Per original
commit 86741ec25462 ("net: core: Add a UID field to struct sock.",
2016-11-04), that's wrong: the idea is to cache the UID of the userspace
process that creates the socket. Commit 86741ec25462 mentions socket() and
accept(); with "tap", the action that creates the socket is
open("/dev/tapX").

Therefore the device node's owner UID is irrelevant. In most cases,
"/dev/tapX" will be owned by root, so in practice, commit 66b2c338adce has
no observable effect:

- before, "sk_uid" would be zero, due to undefined behavior
(CVE-2023-1076),

- after, "sk_uid" would be zero, due to "/dev/tapX" being owned by root.

What matters is the (fs)UID of the process performing the open(), so cache
that in "sk_uid".

Cc: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pietro Borrello <borrello@diag.uniroma1.it>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 66b2c338adce ("tap: tap_open(): correctly initialize socket uid")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2173435
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: tun_chr_open(): set sk_uid from current_fsuid()

commit 9bc3047374d5bec163e83e743709e23753376f0c upstream.

Commit a096ccca6e50 initializes the "sk_uid" field in the protocol socket
(struct sock) from the "/dev/net/tun" device node's owner UID. Per
original commit 86741ec25462 ("net: core: Add a UID field to struct
sock.", 2016-11-04), that's wrong: the idea is to cache the UID of the
userspace process that creates the socket. Commit 86741ec25462 mentions
socket() and accept(); with "tun", the action that creates the socket is
open("/dev/net/tun").

Therefore the device node's owner UID is irrelevant. In most cases,
"/dev/net/tun" will be owned by root, so in practice, commit a096ccca6e50
has no observable effect:

- before, "sk_uid" would be zero, due to undefined behavior
(CVE-2023-1076),

- after, "sk_uid" would be zero, due to "/dev/net/tun" being owned by root.

What matters is the (fs)UID of the process performing the open(), so cache
that in "sk_uid".

Cc: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pietro Borrello <borrello@diag.uniroma1.it>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: a096ccca6e50 ("tun: tun_chr_open(): correctly initialize socket uid")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2173435
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: stratix10: fix incorrect I2C property for SCL signal

commit db66795f61354c373ecdadbdae1ed253a96c47cb upstream.

The correct dts property for the SCL falling time is
"i2c-scl-falling-time-ns".

Fixes: c8da1d15b8a4 ("arm64: dts: stratix10: i2c clock running out of spec")
Cc: stable@vger.kernel.org
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Disable preemption in bpf_perf_event_output

commit f2c67a3e60d1071b65848efaa8c3b66c363dd025 upstream.

The nesting protection in bpf_perf_event_output relies on disabled
preemption, which is guaranteed for kprobes and tracepoints.

However bpf_perf_event_output can be also called from uprobes context
through bpf_prog_run_array_sleepable function which disables migration,
but keeps preemption enabled.

This can cause task to be preempted by another one inside the nesting
protection and lead eventually to two tasks using same perf_sample_data
buffer and cause crashes like:

  kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
  BUG: unable to handle page fault for address: ffffffff82be3eea
  ...
  Call Trace:
   ? __die+0x1f/0x70
   ? page_fault_oops+0x176/0x4d0
   ? exc_page_fault+0x132/0x230
   ? asm_exc_page_fault+0x22/0x30
   ? perf_output_sample+0x12b/0x910
   ? perf_event_output+0xd0/0x1d0
   ? bpf_perf_event_output+0x162/0x1d0
   ? bpf_prog_c6271286d9a4c938_krava1+0x76/0x87
   ? __uprobe_perf_func+0x12b/0x540
   ? uprobe_dispatcher+0x2c4/0x430
   ? uprobe_notify_resume+0x2da/0xce0
   ? atomic_notifier_call_chain+0x7b/0x110
   ? exit_to_user_mode_prepare+0x13e/0x290
   ? irqentry_exit_to_user_mode+0x5/0x30
   ? asm_exc_int3+0x35/0x40

Fixing this by disabling preemption in bpf_perf_event_output.

Cc: stable@vger.kernel.org
Fixes: 8c7dcb84e3b7 ("bpf: implement sleepable uprobes by chaining gps")
Acked-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230725084206.580930-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: meson: fix OOB available bytes for ECC

commit 7e6b04f9238eab0f684fafd158c1f32ea65b9eaa upstream.

It is incorrect to calculate number of OOB bytes for ECC engine using
some "already known" ECC step size (1024 bytes here). Number of such
bytes for ECC engine must be whole OOB except 2 bytes for bad block
marker, while proper ECC step size and strength will be selected by
ECC logic.

Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230705065211.293500-1-AVKrasnov@sberdevices.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: spinand: toshiba: Fix ecc_get_status

commit 8544cda94dae6be3f1359539079c68bb731428b1 upstream.

Reading ECC status is failing.

tx58cxgxsxraix_ecc_get_status() is using on-stack buffer
for SPINAND_GET_FEATURE_OP() output. It is not suitable
for DMA needs of spi-mem.

Fix this by using the spi-mem operations dedicated buffer
spinand->scratchbuf.

See
spinand->scratchbuf:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/mtd/spinand.h?h=v6.3#n418
spi_mem_check_op():
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/spi/spi-mem.c?h=v6.3#n199

Fixes: 10949af1681d ("mtd: spinand: Add initial support for Toshiba TC58CVG2S0H")
Cc: stable@vger.kernel.org
Signed-off-by: Olivier Maignial <olivier.maignial@hotmail.fr>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/DB4P250MB1032553D05FBE36DEE0D311EFE23A@DB4P250MB1032.EURP250.PROD.OUTLOOK.COM
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exfat: release s_lock before calling dir_emit()

commit ff84772fd45d486e4fc78c82e2f70ce5333543e6 upstream.

There is a potential deadlock reported by syzbot as below:

======================================================
WARNING: possible circular locking dependency detected
6.4.0-next-20230707-syzkaller #0 Not tainted
------------------------------------------------------
syz-executor330/5073 is trying to acquire lock:
ffff8880218527a0 (&mm->mmap_lock){++++}-{3:3}, at: mmap_read_lock_killable include/linux/mmap_lock.h:151 [inline]
ffff8880218527a0 (&mm->mmap_lock){++++}-{3:3}, at: get_mmap_lock_carefully mm/memory.c:5293 [inline]
ffff8880218527a0 (&mm->mmap_lock){++++}-{3:3}, at: lock_mm_and_find_vma+0x369/0x510 mm/memory.c:5344
but task is already holding lock:
ffff888019f760e0 (&sbi->s_lock){+.+.}-{3:3}, at: exfat_iterate+0x117/0xb50 fs/exfat/dir.c:232

which lock already depends on the new lock.

Chain exists of:
  &mm->mmap_lock --> mapping.invalidate_lock#3 --> &sbi->s_lock

Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&sbi->s_lock);
                               lock(mapping.invalidate_lock#3);
                               lock(&sbi->s_lock);
  rlock(&mm->mmap_lock);

Let's try to avoid above potential deadlock condition by moving dir_emit*()
out of sbi->s_lock coverage.

Fixes: ca06197382bd ("exfat: add directory operations")
Cc: stable@vger.kernel.org #v5.7+
Reported-by: syzbot+1741a5d9b79989c10bdc@syzkaller.appspotmail.com
Link: https://lore.kernel.org/lkml/00000000000078ee7e060066270b@google.com/T/#u
Tested-by: syzbot+1741a5d9b79989c10bdc@syzkaller.appspotmail.com
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exfat: use kvmalloc_array/kvfree instead of kmalloc_array/kfree

commit daf60d6cca26e50d65dac374db92e58de745ad26 upstream.

The call stack shown below is a scenario in the Linux 4.19 kernel.
Allocating memory failed where exfat fs use kmalloc_array due to
system memory fragmentation, while the u-disk was inserted without
recognition.
Devices such as u-disk using the exfat file system are pluggable and
may be insert into the system at any time.
However, long-term running systems cannot guarantee the continuity of
physical memory. Therefore, it's necessary to address this issue.

Binder:2632_6: page allocation failure: order:4,
mode:0x6040c0(GFP_KERNEL|__GFP_COMP), nodemask=(null)
Call trace:
[242178.097582]  dump_backtrace+0x0/0x4
[242178.097589]  dump_stack+0xf4/0x134
[242178.097598]  warn_alloc+0xd8/0x144
[242178.097603]  __alloc_pages_nodemask+0x1364/0x1384
[242178.097608]  kmalloc_order+0x2c/0x510
[242178.097612]  kmalloc_order_trace+0x40/0x16c
[242178.097618]  __kmalloc+0x360/0x408
[242178.097624]  load_alloc_bitmap+0x160/0x284
[242178.097628]  exfat_fill_super+0xa3c/0xe7c
[242178.097635]  mount_bdev+0x2e8/0x3a0
[242178.097638]  exfat_fs_mount+0x40/0x50
[242178.097643]  mount_fs+0x138/0x2e8
[242178.097649]  vfs_kern_mount+0x90/0x270
[242178.097655]  do_mount+0x798/0x173c
[242178.097659]  ksys_mount+0x114/0x1ac
[242178.097665]  __arm64_sys_mount+0x24/0x34
[242178.097671]  el0_svc_common+0xb8/0x1b8
[242178.097676]  el0_svc_handler+0x74/0x90
[242178.097681]  el0_svc+0x8/0x340

By analyzing the exfat code,we found that continuous physical memory
is not required here,so kvmalloc_array is used can solve this problem.

Cc: stable@vger.kernel.org
Signed-off-by: gaoming <gaoming20@hihonor.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: arm_scmi: Drop OF node reference in the transport channel setup

commit da042eb4f061a0b54aedadcaa15391490c48e1ad upstream.

The OF node reference obtained from of_parse_phandle() should be dropped
if node is not compatible with arm,scmi-shmem.

Fixes: 507cd4d2c5eb ("firmware: arm_scmi: Add compatibility checks for shmem node")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230719061652.8850-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: defer stopping mdsc delayed_work

commit e7e607bd00481745550389a29ecabe33e13d67cf upstream.

Flushing the dirty buffer may take a long time if the cluster is
overloaded or if there is network issue. So we should ping the
MDSs periodically to keep alive, else the MDS will blocklist
the kclient.

Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/61843
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: zaurus: Add ID for A-300/B-500/C-700

commit b99225b4fe297d07400f9e2332ecd7347b224f8d upstream.

The SL-A300, B500/5600, and C700 devices no longer auto-load because of
"usbnet: Remove over-broad module alias from zaurus."
This patch adds IDs for those 3 devices.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217632
Fixes: 16adf5d07987 ("usbnet: Remove over-broad module alias from zaurus.")
Signed-off-by: Ross Maynard <bids.7405@bigpond.com>
Cc: stable@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/69b5423b-2013-9fc9-9569-58e707d9bafb@bigpond.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libceph: fix potential hang in ceph_osdc_notify()

commit e6e2843230799230fc5deb8279728a7218b0d63c upstream.

If the cluster becomes unavailable, ceph_osdc_notify() may hang even
with osd_request_timeout option set because linger_notify_finish_wait()
waits for MWatchNotify NOTIFY_COMPLETE message with no associated OSD
request in flight -- it's completely asynchronous.

Introduce an additional timeout, derived from the specified notify
timeout. While at it, switch both waits to killable which is more
correct.

Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: storvsc: Limit max_sectors for virtual Fibre Channel devices

commit 010c1e1c5741365dbbf44a5a5bb9f30192875c4c upstream.

The Hyper-V host is queried to get the max transfer size that it supports,
and this value is used to set max_sectors for the synthetic SCSI
controller. However, this max transfer size may be too large for virtual
Fibre Channel devices, which are limited to 512 Kbytes. If a larger
transfer size is used with a vFC device, Hyper-V always returns an error,
and storvsc logs a message like this where the SRB status and SCSI status
are both zero:

hv_storvsc <GUID>: tag#197 cmd 0x8a status: scsi 0x0 srb 0x0 hv 0xc0000001

Add logic to limit the max transfer size to 512 Kbytes for vFC devices.

Fixes: 1d3e0980782f ("scsi: storvsc: Correct reporting of Hyper-V I/O size limits")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1689887102-32806-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: zfcp: Defer fc_rport blocking until after ADISC response

commit e65851989001c0c9ba9177564b13b38201c0854c upstream.

Storage devices are free to send RSCNs, e.g. for internal state changes. If
this happens on all connected paths, zfcp risks temporarily losing all
paths at the same time. This has strong requirements on multipath
configuration such as "no_path_retry queue".

Avoid such situations by deferring fc_rport blocking until after the ADISC
response, when any actual state change of the remote port became clear.
The already existing port recovery triggers explicitly block the fc_rport.
The triggers are: on ADISC reject or timeout (typical cable pull case), and
on ADISC indicating that the remote port has changed its WWPN or
the port is meanwhile no longer open.

As a side effect, this also removes a confusing direct function call to
another work item function zfcp_scsi_rport_work() instead of scheduling
that other work item. It was probably done that way to have the rport block
side effect immediate and synchronous to the caller.

Fixes: a2fa0aede07c ("[SCSI] zfcp: Block FC transport rports early on errors")
Cc: stable@vger.kernel.org #v2.6.30+
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Link: https://lore.kernel.org/r/20230724145156.3920244-1-maier@linux.ibm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rust: allocator: Prevent mis-aligned allocation

commit b3d8aa84bbfe9b58ccc5332cacf8ea17200af310 upstream.

Currently the rust allocator simply passes the size of the type Layout
to krealloc(), and in theory the alignment requirement from the type
Layout may be larger than the guarantee provided by SLAB, which means
the allocated object is mis-aligned.

Fix this by adjusting the allocation size to the nearest power of two,
which SLAB always guarantees a size-aligned allocation. And because Rust
guarantees that the original size must be a multiple of alignment and
the alignment must be a power of two, then the alignment requirement is
satisfied.

Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Co-developed-by: "Andreas Hindborg (Samsung)" <nmi@metaspace.dk>
Signed-off-by: "Andreas Hindborg (Samsung)" <nmi@metaspace.dk>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Cc: stable@vger.kernel.org # v6.1+
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Fixes: 247b365dc8dc ("rust: add `kernel` crate")
Link: https://github.com/Rust-for-Linux/linux/issues/974
Link: https://lore.kernel.org/r/20230730012905.643822-2-boqun.feng@gmail.com
[ Applied rewording of comment as discussed in the mailing list. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp_metrics: fix data-race in tcpm_suck_dst() vs fastopen

[ Upstream commit ddf251fa2bc1d3699eec0bae6ed0bc373b8fda79 ]

Whenever tcpm_new() reclaims an old entry, tcpm_suck_dst()
would overwrite data that could be read from tcp_fastopen_cache_get()
or tcp_metrics_fill_info().

We need to acquire fastopen_seqlock to maintain consistency.

For newly allocated objects, tcpm_new() can switch to kzalloc()
to avoid an extra fastopen_seqlock acquisition.

Fixes: 1fe4c481ba63 ("net-tcp: Fast Open client - cookie cache")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp_metrics: annotate data-races around tm->tcpm_net

[ Upstream commit d5d986ce42c71a7562d32c4e21e026b0f87befec ]

tm->tcpm_net can be read or written locklessly.

Instead of changing write_pnet() and read_pnet() and potentially
hurt performance, add the needed READ_ONCE()/WRITE_ONCE()
in tm_net() and tcpm_new().

Fixes: 849e8a0ca8d5 ("tcp_metrics: Add a field tcpm_net and verify it matches on lookup")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp_metrics: annotate data-races around tm->tcpm_vals[]

[ Upstream commit 8c4d04f6b443869d25e59822f7cec88d647028a9 ]

tm->tcpm_vals[] values can be read or written locklessly.

Add needed READ_ONCE()/WRITE_ONCE() to document this,
and force use of tcp_metric_get() and tcp_metric_set()

Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp_metrics: annotate data-races around tm->tcpm_lock

[ Upstream commit 285ce119a3c6c4502585936650143e54c8692788 ]

tm->tcpm_lock can be read or written locklessly.

Add needed READ_ONCE()/WRITE_ONCE() to document this.

Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp_metrics: annotate data-races around tm->tcpm_stamp

[ Upstream commit 949ad62a5d5311d36fce2e14fe5fed3f936da51c ]

tm->tcpm_stamp can be read or written locklessly.

Add needed READ_ONCE()/WRITE_ONCE() to document this.

Also constify tcpm_check_stamp() dst argument.

Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp_metrics: fix addr_same() helper

[ Upstream commit e6638094d7af6c7b9dcca05ad009e79e31b4f670 ]

Because v4 and v6 families use separate inetpeer trees (respectively
net->ipv4.peers and net->ipv6.peers), inetpeer_addr_cmp(a, b) assumes
a & b share the same family.

tcp_metrics use a common hash table, where entries can have different
families.

We must therefore make sure to not call inetpeer_addr_cmp()
if the families do not match.

Fixes: d39d14ffa24c ("net: Add helper function to compare inetpeer addresses")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

prestera: fix fallback to previous version on same major version

[ Upstream commit b755c25fbcd568821a3bb0e0d5c2daa5fcb00bba ]

When both supported and previous version have the same major version,
and the firmwares are missing, the driver ends in a loop requesting the
same (previous) version over and over again:

    [   76.327413] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.1.img firmware, fall-back to previous 4.0 version
    [   76.339802] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.352162] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.364502] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.376848] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.389183] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.401522] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.413860] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.426199] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    ...

Fix this by inverting the check to that we aren't yet at the previous
version, and also check the minor version.

This also catches the case where both versions are the same, as it was
after commit bb5dbf2cc64d ("net: marvell: prestera: add firmware v4.0
support").

With this fix applied:

    [   88.499622] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.1.img firmware, fall-back to previous 4.0 version
    [   88.511995] Prestera DX 0000:01:00.0: failed to request previous firmware: mrvl/prestera/mvsw_prestera_fw-v4.0.img
    [   88.522403] Prestera DX: probe of 0000:01:00.0 failed with error -2

Fixes: 47f26018a414 ("net: marvell: prestera: try to load previous fw version")
Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de>
Acked-by: Elad Nachman <enachman@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Taras Chornyi <taras.chornyi@plvision.eu>
Link: https://lore.kernel.org/r/20230802092357.163944-1-jonas.gorski@bisdn.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: fs_core: Skip the FTs in the same FS_TYPE_PRIO_CHAINS fs_prio

[ Upstream commit c635ca45a7a2023904a1f851e99319af7b87017d ]

In the cited commit, new type of FS_TYPE_PRIO_CHAINS fs_prio was added
to support multiple parallel namespaces for multi-chains. And we skip
all the flow tables under the fs_node of this type unconditionally,
when searching for the next or previous flow table to connect for a
new table.

As this search function is also used for find new root table when the
old one is being deleted, it will skip the entire FS_TYPE_PRIO_CHAINS
fs_node next to the old root. However, new root table should be chosen
from it if there is any table in it. Fix it by skipping only the flow
tables in the same FS_TYPE_PRIO_CHAINS fs_node when finding the
closest FT for a fs_node.

Besides, complete the connecting from FTs of previous priority of prio
because there should be multiple prevs after this fs_prio type is
introduced. And also the next FT should be chosen from the first flow
table next to the prio in the same FS_TYPE_PRIO_CHAINS fs_prio, if
this prio is the first child.

Fixes: 328edb499f99 ("net/mlx5: Split FDB fast path prio to multiple namespaces")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/7a95754df479e722038996c97c97b062b372591f.1690803944.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: fs_core: Make find_closest_ft more generic

[ Upstream commit 618d28a535a0582617465d14e05f3881736a2962 ]

As find_closest_ft_recursive is called to find the closest FT, the
first parameter of find_closest_ft can be changed from fs_prio to
fs_node. Thus this function is extended to find the closest FT for the
nodes of any type, not only prios, but also the sub namespaces.

Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/d3962c2b443ec8dde7a740dc742a1f052d5e256c.1690803944.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: c635ca45a7a2 ("net/mlx5: fs_core: Skip the FTs in the same FS_TYPE_PRIO_CHAINS fs_prio")
Signed-off-by: Sasha Levin <sashal@kernel.org>

vxlan: Fix nexthop hash size

[ Upstream commit 0756384fb1bd38adb2ebcfd1307422f433a1d772 ]

The nexthop code expects a 31 bit hash, such as what is returned by
fib_multipath_hash() and rt6_multipath_hash(). Passing the 32 bit hash
returned by skb_get_hash() can lead to problems related to the fact that
'int hash' is a negative number when the MSB is set.

In the case of hash threshold nexthop groups, nexthop_select_path_hthr()
will disproportionately select the first nexthop group entry. In the case
of resilient nexthop groups, nexthop_select_path_res() may do an out of
bounds access in nh_buckets[], for example:
    hash = -912054133
    num_nh_buckets = 2
    bucket_index = 65535

which leads to the following panic:

BUG: unable to handle page fault for address: ffffc900025910c8
PGD 100000067 P4D 100000067 PUD 10026b067 PMD 0
Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI
CPU: 4 PID: 856 Comm: kworker/4:3 Not tainted 6.5.0-rc2+ #34
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:nexthop_select_path+0x197/0xbf0
Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85
RSP: 0018:ffff88810c36f260 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77
RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8
RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219
R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0
R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900
FS:  0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffc900025910c8 CR3: 0000000129d00000 CR4: 0000000000750ee0
PKRU: 55555554
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x1ee/0x5c0
? __pfx_is_prefetch.constprop.0+0x10/0x10
? __pfx_page_fault_oops+0x10/0x10
? search_bpf_extables+0xfe/0x1c0
? fixup_exception+0x3b/0x470
? exc_page_fault+0xf6/0x110
? asm_exc_page_fault+0x26/0x30
? nexthop_select_path+0x197/0xbf0
? nexthop_select_path+0x197/0xbf0
? lock_is_held_type+0xe7/0x140
vxlan_xmit+0x5b2/0x2340
? __lock_acquire+0x92b/0x3370
? __pfx_vxlan_xmit+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
? __pfx_register_lock_class+0x10/0x10
? skb_network_protocol+0xce/0x2d0
? dev_hard_start_xmit+0xca/0x350
? __pfx_vxlan_xmit+0x10/0x10
dev_hard_start_xmit+0xca/0x350
__dev_queue_xmit+0x513/0x1e20
? __pfx___dev_queue_xmit+0x10/0x10
? __pfx_lock_release+0x10/0x10
? mark_held_locks+0x44/0x90
? skb_push+0x4c/0x80
? eth_header+0x81/0xe0
? __pfx_eth_header+0x10/0x10
? neigh_resolve_output+0x215/0x310
? ip6_finish_output2+0x2ba/0xc90
ip6_finish_output2+0x2ba/0xc90
? lock_release+0x236/0x3e0
? ip6_mtu+0xbb/0x240
? __pfx_ip6_finish_output2+0x10/0x10
? find_held_lock+0x83/0xa0
? lock_is_held_type+0xe7/0x140
ip6_finish_output+0x1ee/0x780
ip6_output+0x138/0x460
? __pfx_ip6_output+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
? __pfx_ip6_finish_output+0x10/0x10
NF_HOOK.constprop.0+0xc0/0x420
? __pfx_NF_HOOK.constprop.0+0x10/0x10
? ndisc_send_skb+0x2c0/0x960
? __pfx_lock_release+0x10/0x10
? __local_bh_enable_ip+0x93/0x110
? lock_is_held_type+0xe7/0x140
ndisc_send_skb+0x4be/0x960
? __pfx_ndisc_send_skb+0x10/0x10
? mark_held_locks+0x65/0x90
? find_held_lock+0x83/0xa0
ndisc_send_ns+0xb0/0x110
? __pfx_ndisc_send_ns+0x10/0x10
addrconf_dad_work+0x631/0x8e0
? lock_acquire+0x180/0x3f0
? __pfx_addrconf_dad_work+0x10/0x10
? mark_held_locks+0x24/0x90
process_one_work+0x582/0x9c0
? __pfx_process_one_work+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? mark_held_locks+0x24/0x90
worker_thread+0x93/0x630
? __kthread_parkme+0xdc/0x100
? __pfx_worker_thread+0x10/0x10
kthread+0x1a5/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
RIP: 0000:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0000:0000000000000000 EFLAGS: 00000000 ORIG_RAX: 0000000000000000
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Modules linked in:
CR2: ffffc900025910c8
---[ end trace 0000000000000000 ]---
RIP: 0010:nexthop_select_path+0x197/0xbf0
Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85
RSP: 0018:ffff88810c36f260 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77
RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8
RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219
R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0
R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900
FS:  0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 0000000129d00000 CR4: 0000000000750ee0
PKRU: 55555554
Kernel panic - not syncing: Fatal exception in interrupt
Kernel Offset: 0x2ca00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Fix this problem by ensuring the MSB of hash is 0 using a right shift - the
same approach used in fib_multipath_hash() and rt6_multipath_hash().

Fixes: 1274e1cc4226 ("vxlan: ecmp support for mac fdb entries")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ip6mr: Fix skb_under_panic in ip6mr_cache_report()

[ Upstream commit 30e0191b16e8a58e4620fa3e2839ddc7b9d4281c ]

skbuff: skb_under_panic: text:ffffffff88771f69 len:56 put:-4
head:ffff88805f86a800 data:ffff887f5f86a850 tail:0x88 end:0x2c0 dev:pim6reg
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:192!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 2 PID: 22968 Comm: kworker/2:11 Not tainted 6.5.0-rc3-00044-g0a8db05b571a #236
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:skb_panic+0x152/0x1d0
Call Trace:
  <TASK>
  skb_push+0xc4/0xe0
  ip6mr_cache_report+0xd69/0x19b0
  reg_vif_xmit+0x406/0x690
  dev_hard_start_xmit+0x17e/0x6e0
  __dev_queue_xmit+0x2d6a/0x3d20
  vlan_dev_hard_start_xmit+0x3ab/0x5c0
  dev_hard_start_xmit+0x17e/0x6e0
  __dev_queue_xmit+0x2d6a/0x3d20
  neigh_connected_output+0x3ed/0x570
  ip6_finish_output2+0x5b5/0x1950
  ip6_finish_output+0x693/0x11c0
  ip6_output+0x24b/0x880
  NF_HOOK.constprop.0+0xfd/0x530
  ndisc_send_skb+0x9db/0x1400
  ndisc_send_rs+0x12a/0x6c0
  addrconf_dad_completed+0x3c9/0xea0
  addrconf_dad_work+0x849/0x1420
  process_one_work+0xa22/0x16e0
  worker_thread+0x679/0x10c0
  ret_from_fork+0x28/0x60
  ret_from_fork_asm+0x11/0x20

When setup a vlan device on dev pim6reg, DAD ns packet may sent on reg_vif_xmit().
reg_vif_xmit()
    ip6mr_cache_report()
        skb_push(skb, -skb_network_offset(pkt));//skb_network_offset(pkt) is 4
And skb_push declared as:
void *skb_push(struct sk_buff *skb, unsigned int len);
skb->data -= len;
//0xffff88805f86a84c - 0xfffffffc = 0xffff887f5f86a850
skb->data is set to 0xffff887f5f86a850, which is invalid mem addr, lead to skb_push() fails.

Fixes: 14fb64e1f449 ("[IPV6] MROUTE: Support PIM-SM (SSM).")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/qeth: Don't call dev_close/dev_open (DOWN/UP)

[ Upstream commit 1cfef80d4c2b2c599189f36f36320b205d9447d9 ]

dev_close() and dev_open() are issued to change the interface state to DOWN
or UP (dev->flags IFF_UP). When the netdev is set DOWN it loses e.g its
Ipv6 addresses and routes. We don't want this in cases of device recovery
(triggered by hardware or software) or when the qeth device is set
offline.

Setting a qeth device offline or online and device recovery actions call
netif_device_detach() and/or netif_device_attach(). That will reset or
set the LOWER_UP indication i.e. change the dev->state Bit
__LINK_STATE_PRESENT. That is enough to e.g. cause bond failovers, and
still preserves the interface settings that are handled by the network
stack.

Don't call dev_open() nor dev_close() from the qeth device driver. Let the
network stack handle this.

Fixes: d4560150cb47 ("s390/qeth: call dev_close() during recovery")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dcb: choose correct policy to parse DCB_ATTR_BCN

[ Upstream commit 31d49ba033095f6e8158c60f69714a500922e0c3 ]

The dcbnl_bcn_setcfg uses erroneous policy to parse tb[DCB_ATTR_BCN],
which is introduced in commit 859ee3c43812 ("DCB: Add support for DCB
BCN"). Please see the comment in below code

static int dcbnl_bcn_setcfg(...)
{
  ...
  ret = nla_parse_nested_deprecated(..., dcbnl_pfc_up_nest, .. )
  // !!! dcbnl_pfc_up_nest for attributes
  //  DCB_PFC_UP_ATTR_0 to DCB_PFC_UP_ATTR_ALL in enum dcbnl_pfc_up_attrs
  ...
  for (i = DCB_BCN_ATTR_RP_0; i <= DCB_BCN_ATTR_RP_7; i++) {
  // !!! DCB_BCN_ATTR_RP_0 to DCB_BCN_ATTR_RP_7 in enum dcbnl_bcn_attrs
    ...
    value_byte = nla_get_u8(data[i]);
    ...
  }
  ...
  for (i = DCB_BCN_ATTR_BCNA_0; i <= DCB_BCN_ATTR_RI; i++) {
  // !!! DCB_BCN_ATTR_BCNA_0 to DCB_BCN_ATTR_RI in enum dcbnl_bcn_attrs
  ...
    value_int = nla_get_u32(data[i]);
  ...
  }
  ...
}

That is, the nla_parse_nested_deprecated uses dcbnl_pfc_up_nest
attributes to parse nlattr defined in dcbnl_pfc_up_attrs. But the
following access code fetch each nlattr as dcbnl_bcn_attrs attributes.
By looking up the associated nla_policy for dcbnl_bcn_attrs. We can find
the beginning part of these two policies are "same".

static const struct nla_policy dcbnl_pfc_up_nest[...] = {
        [DCB_PFC_UP_ATTR_0]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_1]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_2]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_3]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_4]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_5]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_6]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_7]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_ALL] = {.type = NLA_FLAG},
};

static const struct nla_policy dcbnl_bcn_nest[...] = {
        [DCB_BCN_ATTR_RP_0]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_1]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_2]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_3]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_4]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_5]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_6]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_7]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_ALL]       = {.type = NLA_FLAG},
        // from here is somewhat different
        [DCB_BCN_ATTR_BCNA_0]       = {.type = NLA_U32},
        ...
        [DCB_BCN_ATTR_ALL]          = {.type = NLA_FLAG},
};

Therefore, the current code is buggy and this
nla_parse_nested_deprecated could overflow the dcbnl_pfc_up_nest and use
the adjacent nla_policy to parse attributes from DCB_BCN_ATTR_BCNA_0.

Hence use the correct policy dcbnl_bcn_nest to parse the nested
tb[DCB_ATTR_BCN] TLV.

Fixes: 859ee3c43812 ("DCB: Add support for DCB BCN")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230801013248.87240-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Fix max_mtu setting for multi-buf XDP

[ Upstream commit 08450ea98ae98d5a35145b675b76db616046ea11 ]

The existing code does not allow the MTU to be set to the maximum even
after an XDP program supporting multiple buffers is attached. Fix it
to set the netdev->max_mtu to the maximum value if the attached XDP
program supports mutiple buffers, regardless of the current MTU value.

Also use a local variable dev instead of repeatedly using bp->dev.

Fixes: 1dc4c557bfed ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230731142043.58855-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Fix page pool logic for page size >= 64K

[ Upstream commit f6974b4c2d8e1062b5a52228ee47293c15b4ee1e ]

The RXBD length field on all bnxt chips is 16-bit and so we cannot
support a full page when the native page size is 64K or greater.
The non-XDP (non page pool) code path has logic to handle this but
the XDP page pool code path does not handle this. Add the missing
logic to use page_pool_dev_alloc_frag() to allocate 32K chunks if
the page size is 64K or greater.

Fixes: 9f4b28301ce6 ("bnxt: XDP multibuffer enablement")
Link: https://lore.kernel.org/netdev/20230728231829.235716-2-michael.chan@broadcom.com/
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230731142043.58855-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: netsec: Ignore 'phy-mode' on SynQuacer in DT mode

[ Upstream commit f3bb7759a924713bc54d15f6d0d70733b5935fad ]

As documented in acd7aaf51b20 ("netsec: ignore 'phy-mode' device
property on ACPI systems") the SocioNext SynQuacer platform ships with
firmware defining the PHY mode as RGMII even though the physical
configuration of the PHY is for TX and RX delays.  Since bbc4d71d63549bc
("net: phy: realtek: fix rtl8211e rx/tx delay config") this has caused
misconfiguration of the PHY, rendering the network unusable.

This was worked around for ACPI by ignoring the phy-mode property but
the system is also used with DT.  For DT instead if we're running on a
SynQuacer force a working PHY mode, as well as the standard EDK2
firmware with DT there are also some of these systems that use u-boot
and might not initialise the PHY if not netbooting.  Newer firmware
imagaes for at least EDK2 are available from Linaro so print a warning
when doing this.

Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230731-synquacer-net-v3-1-944be5f06428@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: korina: handle clk prepare error in korina_probe()

[ Upstream commit 0b6291ad1940c403734312d0e453e8dac9148f69 ]

in korina_probe(), the return value of clk_prepare_enable()
should be checked since it might fail. we can use
devm_clk_get_optional_enabled() instead of devm_clk_get_optional()
and clk_prepare_enable() to automatically handle the error.

Fixes: e4cd854ec487 ("net: korina: Get mdio input clock via common clock framework")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Link: https://lore.kernel.org/r/20230731090535.21416-1-ruc_gongyuanjun@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ll_temac: fix error checking of irq_of_parse_and_map()

[ Upstream commit ef45e8400f5bb66b03cc949f76c80e2a118447de ]

Most kernel functions return negative error codes but some irq functions
return zero on error. In this code irq_of_parse_and_map(), returns zero
and platform_get_irq() returns negative error codes. We need to handle
both cases appropriately.

Fixes: 8425c41d1ef7 ("net: ll_temac: Extend support to non-device-tree platforms")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Esben Haabendal <esben@geanix.com>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Harini Katakam <harini.katakam@amd.com>
Link: https://lore.kernel.org/r/3d0aef75-06e0-45a5-a2a6-2cc4738d4143@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: sockmap: Remove preempt_disable in sock_map_sk_acquire

[ Upstream commit 13d2618b48f15966d1adfe1ff6a1985f5eef40ba ]

Disabling preemption in sock_map_sk_acquire conflicts with GFP_ATOMIC
allocation later in sk_psock_init_link on PREEMPT_RT kernels, since
GFP_ATOMIC might sleep on RT (see bpf: Make BPF and PREEMPT_RT co-exist
patchset notes for details).

This causes calling bpf_map_update_elem on BPF_MAP_TYPE_SOCKMAP maps to
BUG (sleeping function called from invalid context) on RT kernels.

preempt_disable was introduced together with lock_sk and rcu_read_lock
in commit 99ba2b5aba24e ("bpf: sockhash, disallow bpf_tcp_close and update
in parallel"), probably to match disabled migration of BPF programs, and
is no longer necessary.

Remove preempt_disable to fix BUG in sock_map_update_common on RT.

Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/all/20200224140131.461979697@linutronix.de/
Fixes: 99ba2b5aba24 ("bpf: sockhash, disallow bpf_tcp_close and update in parallel")
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230728064411.305576-1-tglozar@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: cls_route: No longer copy tcf_result on update to avoid use-after-free

[ Upstream commit b80b829e9e2c1b3f7aae34855e04d8f6ecaf13c8 ]

When route4_change() is called on an existing filter, the whole
tcf_result struct is always copied into the new instance of the filter.

This causes a problem when updating a filter bound to a class,
as tcf_unbind_filter() is always called on the old instance in the
success path, decreasing filter_cnt of the still referenced class
and allowing it to be deleted, leading to a use-after-free.

Fix this by no longer copying the tcf_result struct from the old filter.

Fixes: 1109c00547fc ("net: sched: RCU cls_route")
Reported-by: valis <sec@valis.email>
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Signed-off-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: M A Ramdhan <ramdhan@starlabs.sg>
Link: https://lore.kernel.org/r/20230729123202.72406-4-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: cls_fw: No longer copy tcf_result on update to avoid use-after-free

[ Upstream commit 76e42ae831991c828cffa8c37736ebfb831ad5ec ]

When fw_change() is called on an existing filter, the whole
tcf_result struct is always copied into the new instance of the filter.

This causes a problem when updating a filter bound to a class,
as tcf_unbind_filter() is always called on the old instance in the
success path, decreasing filter_cnt of the still referenced class
and allowing it to be deleted, leading to a use-after-free.

Fix this by no longer copying the tcf_result struct from the old filter.

Fixes: e35a8ee5993b ("net: sched: fw use RCU")
Reported-by: valis <sec@valis.email>
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Signed-off-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: M A Ramdhan <ramdhan@starlabs.sg>
Link: https://lore.kernel.org/r/20230729123202.72406-3-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: cls_u32: No longer copy tcf_result on update to avoid use-after-free

[ Upstream commit 3044b16e7c6fe5d24b1cdbcf1bd0a9d92d1ebd81 ]

When u32_change() is called on an existing filter, the whole
tcf_result struct is always copied into the new instance of the filter.

This causes a problem when updating a filter bound to a class,
as tcf_unbind_filter() is always called on the old instance in the
success path, decreasing filter_cnt of the still referenced class
and allowing it to be deleted, leading to a use-after-free.

Fix this by no longer copying the tcf_result struct from the old filter.

Fixes: de5df63228fc ("net: sched: cls_u32 changes to knode must appear atomic to readers")
Reported-by: valis <sec@valis.email>
Reported-by: M A Ramdhan <ramdhan@starlabs.sg>
Signed-off-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: M A Ramdhan <ramdhan@starlabs.sg>
Link: https://lore.kernel.org/r/20230729123202.72406-2-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, cpumap: Handle skb as well when clean up ptr_ring

[ Upstream commit 7c62b75cd1a792e14b037fa4f61f9b18914e7de1 ]

The following warning was reported when running xdp_redirect_cpu with
both skb-mode and stress-mode enabled:

  ------------[ cut here ]------------
  Incorrect XDP memory type (-2128176192) usage
  WARNING: CPU: 7 PID: 1442 at net/core/xdp.c:405
  Modules linked in:
  CPU: 7 PID: 1442 Comm: kworker/7:0 Tainted: G  6.5.0-rc2+ #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
  Workqueue: events __cpu_map_entry_free
  RIP: 0010:__xdp_return+0x1e4/0x4a0
  ......
  Call Trace:
   <TASK>
   ? show_regs+0x65/0x70
   ? __warn+0xa5/0x240
   ? __xdp_return+0x1e4/0x4a0
   ......
   xdp_return_frame+0x4d/0x150
   __cpu_map_entry_free+0xf9/0x230
   process_one_work+0x6b0/0xb80
   worker_thread+0x96/0x720
   kthread+0x1a5/0x1f0
   ret_from_fork+0x3a/0x70
   ret_from_fork_asm+0x1b/0x30
   </TASK>

The reason for the warning is twofold. One is due to the kthread
cpu_map_kthread_run() is stopped prematurely. Another one is
__cpu_map_ring_cleanup() doesn't handle skb mode and treats skbs in
ptr_ring as XDP frames.

Prematurely-stopped kthread will be fixed by the preceding patch and
ptr_ring will be empty when __cpu_map_ring_cleanup() is called. But
as the comments in __cpu_map_ring_cleanup() said, handling and freeing
skbs in ptr_ring as well to "catch any broken behaviour gracefully".

Fixes: 11941f8a8536 ("bpf: cpumap: Implement generic cpumap")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230729095107.1722450-3-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Fix RDMA VSI removal during queue rebuild

[ Upstream commit 4b31fd4d77ffa430d0b74ba1885ea0a41594f202 ]

During qdisc create/delete, it is necessary to rebuild the queue
of VSIs. An error occurred because the VSIs created by RDMA were
still active.

Added check if RDMA is active. If yes, it disallows qdisc changes
and writes a message in the system logs.

Fixes: 348048e724a0 ("ice: Implement iidc operations")
Signed-off-by: Rafal Rogalski <rafalx.rogalski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230728171243.2446101-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: taprio: Limit TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME to INT_MAX.

[ Upstream commit e739718444f7bf2fa3d70d101761ad83056ca628 ]

syzkaller found zero division error [0] in div_s64_rem() called from
get_cycle_time_elapsed(), where sched->cycle_time is the divisor.

We have tests in parse_taprio_schedule() so that cycle_time will never
be 0, and actually cycle_time is not 0 in get_cycle_time_elapsed().

The problem is that the types of divisor are different; cycle_time is
s64, but the argument of div_s64_rem() is s32.

syzkaller fed this input and 0x100000000 is cast to s32 to be 0.

  @TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME={0xc, 0x8, 0x100000000}

We use s64 for cycle_time to cast it to ktime_t, so let's keep it and
set max for cycle_time.

While at it, we prevent overflow in setup_txtime() and add another
test in parse_taprio_schedule() to check if cycle_time overflows.

Also, we add a new tdc test case for this issue.

[0]:
divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 1 PID: 103 Comm: kworker/1:3 Not tainted 6.5.0-rc1-00330-g60cc1f7d0605 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:div_s64_rem include/linux/math64.h:42 [inline]
RIP: 0010:get_cycle_time_elapsed net/sched/sch_taprio.c:223 [inline]
RIP: 0010:find_entry_to_transmit+0x252/0x7e0 net/sched/sch_taprio.c:344
Code: 3c 02 00 0f 85 5e 05 00 00 48 8b 4c 24 08 4d 8b bd 40 01 00 00 48 8b 7c 24 48 48 89 c8 4c 29 f8 48 63 f7 48 99 48 89 74 24 70 <48> f7 fe 48 29 d1 48 8d 04 0f 49 89 cc 48 89 44 24 20 49 8d 85 10
RSP: 0018:ffffc90000acf260 EFLAGS: 00010206
RAX: 177450e0347560cf RBX: 0000000000000000 RCX: 177450e0347560cf
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000100000000
RBP: 0000000000000056 R08: 0000000000000000 R09: ffffed10020a0934
R10: ffff8880105049a7 R11: ffff88806cf3a520 R12: ffff888010504800
R13: ffff88800c00d800 R14: ffff8880105049a0 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff88806cf00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0edf84f0e8 CR3: 000000000d73c002 CR4: 0000000000770ee0
PKRU: 55555554
Call Trace:
<TASK>
get_packet_txtime net/sched/sch_taprio.c:508 [inline]
taprio_enqueue_one+0x900/0xff0 net/sched/sch_taprio.c:577
taprio_enqueue+0x378/0xae0 net/sched/sch_taprio.c:658
dev_qdisc_enqueue+0x46/0x170 net/core/dev.c:3732
__dev_xmit_skb net/core/dev.c:3821 [inline]
__dev_queue_xmit+0x1b2f/0x3000 net/core/dev.c:4169
dev_queue_xmit include/linux/netdevice.h:3088 [inline]
neigh_resolve_output net/core/neighbour.c:1552 [inline]
neigh_resolve_output+0x4a7/0x780 net/core/neighbour.c:1532
neigh_output include/net/neighbour.h:544 [inline]
ip6_finish_output2+0x924/0x17d0 net/ipv6/ip6_output.c:135
__ip6_finish_output+0x620/0xaa0 net/ipv6/ip6_output.c:196
ip6_finish_output net/ipv6/ip6_output.c:207 [inline]
NF_HOOK_COND include/linux/netfilter.h:292 [inline]
ip6_output+0x206/0x410 net/ipv6/ip6_output.c:228
dst_output include/net/dst.h:458 [inline]
NF_HOOK.constprop.0+0xea/0x260 include/linux/netfilter.h:303
ndisc_send_skb+0x872/0xe80 net/ipv6/ndisc.c:508
ndisc_send_ns+0xb5/0x130 net/ipv6/ndisc.c:666
addrconf_dad_work+0xc14/0x13f0 net/ipv6/addrconf.c:4175
process_one_work+0x92c/0x13a0 kernel/workqueue.c:2597
worker_thread+0x60f/0x1240 kernel/workqueue.c:2748
kthread+0x2fe/0x3f0 kernel/kthread.c:389
ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308
</TASK>
Modules linked in:

Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Co-developed-by: Eric Dumazet <edumazet@google.com>
Co-developed-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: annotate data-races around sk->sk_priority

[ Upstream commit 8bf43be799d4b242ea552a14db10456446be843e ]

sk_getsockopt() runs locklessly. This means sk->sk_priority
can be read while other threads are changing its value.

Other reads also happen without socket lock being held.

Add missing annotations where needed.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: add missing data-race annotation for sk_ll_usec

[ Upstream commit e5f0d2dd3c2faa671711dac6d3ff3cef307bcfe3 ]

In a prior commit I forgot that sk_getsockopt() reads
sk->sk_ll_usec without holding a lock.

Fixes: 0dbffbb5335a ("net: annotate data race around sk_ll_usec")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: add missing data-race annotations around sk->sk_peek_off

[ Upstream commit 11695c6e966b0ec7ed1d16777d294cef865a5c91 ]

sk_getsockopt() runs locklessly, thus we need to annotate the read
of sk->sk_peek_off.

While we are at it, add corresponding annotations to sk_set_peek_off()
and unix_set_peek_off().

Fixes: b9bb53f3836f ("sock: convert sk_peek_offset functions to WRITE_ONCE")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: annotate data-races around sk->sk_mark

[ Upstream commit 3c5b4d69c358a9275a8de98f87caf6eda644b086 ]

sk->sk_mark is often read while another thread could change the value.

Fixes: 4a19ec5800fc ("[NET]: Introducing socket mark socket option.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: add missing READ_ONCE(sk->sk_rcvbuf) annotation

[ Upstream commit b4b553253091cafe9ec38994acf42795e073bef5 ]

In a prior commit, I forgot to change sk_getsockopt()
when reading sk->sk_rcvbuf locklessly.

Fixes: ebb3b78db7bf ("tcp: annotate sk->sk_rcvbuf lockless reads")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: add missing READ_ONCE(sk->sk_sndbuf) annotation

[ Upstream commit 74bc084327c643499474ba75df485607da37dd6e ]

In a prior commit, I forgot to change sk_getsockopt()
when reading sk->sk_sndbuf locklessly.

Fixes: e292f05e0df7 ("tcp: annotate sk->sk_sndbuf lockless reads")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: add missing READ_ONCE(sk->sk_rcvlowat) annotation

[ Upstream commit e6d12bdb435d23ff6c1890c852d85408a2f496ee ]

In a prior commit, I forgot to change sk_getsockopt()
when reading sk->sk_rcvlowat locklessly.

Fixes: eac66402d1c3 ("net: annotate sk->sk_rcvlowat lockless reads")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: annotate data-races around sk->sk_max_pacing_rate

[ Upstream commit ea7f45ef77b39e72244d282e47f6cb1ef4135cd2 ]

sk_getsockopt() runs locklessly. This means sk->sk_max_pacing_rate
can be read while other threads are changing its value.

Fixes: 62748f32d501 ("net: introduce SO_MAX_PACING_RATE")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: annotate data-race around sk->sk_txrehash

[ Upstream commit c76a0328899bbe226f8adeb88b8da9e4167bd316 ]

sk_getsockopt() runs locklessly. This means sk->sk_txrehash
can be read while other threads are changing its value.

Other locations were handled in commit cb6cd2cec799
("tcp: Change SYN ACK retransmit behaviour to account for rehash")

Fixes: 26859240e4ee ("txhash: Add socket option to control TX hash rethink behavior")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Akhmat Karakotov <hmukos@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: annotate data-races around sk->sk_reserved_mem

[ Upstream commit fe11fdcb4207907d80cda2e73777465d68131e66 ]

sk_getsockopt() runs locklessly. This means sk->sk_reserved_mem
can be read while other threads are changing its value.

Add missing annotations where they are needed.

Fixes: 2bb2f5fb21b0 ("net: add new socket option SO_RESERVE_MEM")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Fix scheduling in a tasklet while getting stats

[ Upstream commit e346e231b42bcae6822a6326acfb7b741e9e6026 ]

Here we've got to a situation when tasklet called usleep_range() in PTT
acquire logic, thus welcome to the "scheduling while atomic" BUG().

  BUG: scheduling while atomic: swapper/24/0/0x00000100

   [<ffffffffb41c6199>] schedule+0x29/0x70
   [<ffffffffb41c5512>] schedule_hrtimeout_range_clock+0xb2/0x150
   [<ffffffffb41c55c3>] schedule_hrtimeout_range+0x13/0x20
   [<ffffffffb41c3bcf>] usleep_range+0x4f/0x70
   [<ffffffffc08d3e58>] qed_ptt_acquire+0x38/0x100 [qed]
   [<ffffffffc08eac48>] _qed_get_vport_stats+0x458/0x580 [qed]
   [<ffffffffc08ead8c>] qed_get_vport_stats+0x1c/0xd0 [qed]
   [<ffffffffc08dffd3>] qed_get_protocol_stats+0x93/0x100 [qed]
                        qed_mcp_send_protocol_stats
            case MFW_DRV_MSG_GET_LAN_STATS:
            case MFW_DRV_MSG_GET_FCOE_STATS:
            case MFW_DRV_MSG_GET_ISCSI_STATS:
            case MFW_DRV_MSG_GET_RDMA_STATS:
   [<ffffffffc08e36d8>] qed_mcp_handle_events+0x2d8/0x890 [qed]
                        qed_int_assertion
                        qed_int_attentions
   [<ffffffffc08d9490>] qed_int_sp_dpc+0xa50/0xdc0 [qed]
   [<ffffffffb3aa7623>] tasklet_action+0x83/0x140
   [<ffffffffb41d9125>] __do_softirq+0x125/0x2bb
   [<ffffffffb41d560c>] call_softirq+0x1c/0x30
   [<ffffffffb3a30645>] do_softirq+0x65/0xa0
   [<ffffffffb3aa78d5>] irq_exit+0x105/0x110
   [<ffffffffb41d8996>] do_IRQ+0x56/0xf0

Fix this by making caller to provide the context whether it could be in
atomic context flow or not when getting stats from QED driver.
QED driver based on the context provided decide to schedule out or not
when acquiring the PTT BAR window.

We faced the BUG_ON() while getting vport stats, but according to the
code same issue could happen for fcoe and iscsi statistics as well, so
fixing them too.

Fixes: 6c75424612a7 ("qed: Add support for NCSI statistics.")
Fixes: 1e128c81290a ("qed: Add support for hardware offloaded FCoE.")
Fixes: 2f2b2614e893 ("qed: Provide iSCSI statistics to management")
Cc: Sudarsana Kalluru <skalluru@marvell.com>
Cc: David Miller <davem@davemloft.net>
Cc: Manish Chopra <manishc@marvell.com>
Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mISDN: hfcpci: Fix potential deadlock on &hc->lock

[ Upstream commit 56c6be35fcbed54279df0a2c9e60480a61841d6f ]

As &hc->lock is acquired by both timer _hfcpci_softirq() and hardirq
hfcpci_int(), the timer should disable irq before lock acquisition
otherwise deadlock could happen if the timmer is preemtped by the hadr irq.

Possible deadlock scenario:
hfcpci_softirq() (timer)
    -> _hfcpci_softirq()
    -> spin_lock(&hc->lock);
        <irq interruption>
        -> hfcpci_int()
        -> spin_lock(&hc->lock); (deadlock here)

This flaw was found by an experimental static analysis tool I am developing
for irq-related deadlock.

The tentative patch fixes the potential deadlock by spin_lock_irq()
in timer.

Fixes: b36b654a7e82 ("mISDN: Create /sys/class/mISDN")
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Link: https://lore.kernel.org/r/20230727085619.7419-1-dg573847474@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: cls_u32: Fix match key mis-addressing

[ Upstream commit e68409db995380d1badacba41ff24996bd396171 ]

A match entry is uniquely identified with an "address" or "path" in the
form of: hashtable ID(12b):bucketid(8b):nodeid(12b).

When creating table match entries all of hash table id, bucket id and
node (match entry id) are needed to be either specified by the user or
reasonable in-kernel defaults are used. The in-kernel default for a table id is
0x800(omnipresent root table); for bucketid it is 0x0. Prior to this fix there
was none for a nodeid i.e. the code assumed that the user passed the correct
nodeid and if the user passes a nodeid of 0 (as Mingi Cho did) then that is what
was used. But nodeid of 0 is reserved for identifying the table. This is not
a problem until we dump. The dump code notices that the nodeid is zero and
assumes it is referencing a table and therefore references table struct
tc_u_hnode instead of what was created i.e match entry struct tc_u_knode.

Ming does an equivalent of:
tc filter add dev dummy0 parent 10: prio 1 handle 0x1000 \
protocol ip u32 match ip src 10.0.0.1/32 classid 10:1 action ok

Essentially specifying a table id 0, bucketid 1 and nodeid of zero
Tableid 0 is remapped to the default of 0x800.
Bucketid 1 is ignored and defaults to 0x00.
Nodeid was assumed to be what Ming passed - 0x000

dumping before fix shows:
~$ tc filter ls dev dummy0 parent 10:
filter protocol ip pref 1 u32 chain 0
filter protocol ip pref 1 u32 chain 0 fh 800: ht divisor 1
filter protocol ip pref 1 u32 chain 0 fh 800: ht divisor -30591

Note that the last line reports a table instead of a match entry
(you can tell this because it says "ht divisor...").
As a result of reporting the wrong data type (misinterpretting of struct
tc_u_knode as being struct tc_u_hnode) the divisor is reported with value
of -30591. Ming identified this as part of the heap address
(physmap_base is 0xffff8880 (-30591 - 1)).

The fix is to ensure that when table entry matches are added and no
nodeid is specified (i.e nodeid == 0) then we get the next available
nodeid from the table's pool.

After the fix, this is what the dump shows:
$ tc filter ls dev dummy0 parent 10:
filter protocol ip pref 1 u32 chain 0
filter protocol ip pref 1 u32 chain 0 fh 800: ht divisor 1
filter protocol ip pref 1 u32 chain 0 fh 800::800 order 2048 key ht 800 bkt 0 flowid 10:1 not_in_hw
match 0a000001/ffffffff at 12
action order 1: gact action pass
random type none pass val 0
index 1 ref 1 bind 1

Reported-by: Mingi Cho <mgcho.minic@gmail.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230726135151.416917-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf test uprobe_from_different_cu: Skip if there is no gcc

[ Upstream commit 98ce8e4a9dcfb448b30a2d7a16190f4a00382377 ]

Without gcc, the test will fail.

On cleanup, ignore probe removal errors. Otherwise, in case of an error
adding the probe, the temporary directory is not removed.

Fixes: 56cbeacf14353057 ("perf probe: Add test for regression introduced by switch to die_get_decl_file()")
Signed-off-by: Georg Müller <georgmueller@gmx.net>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Georg Müller <georgmueller@gmx.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230728151812.454806-2-georgmueller@gmx.net
Link: https://lore.kernel.org/r/CAP-5=fUP6UuLgRty3t2=fQsQi3k4hDMz415vWdp1x88QMvZ8ug@mail.gmail.com/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: fix value check in bcm_sf2_sw_probe()

[ Upstream commit dadc5b86cc9459581f37fe755b431adc399ea393 ]

in bcm_sf2_sw_probe(), check the return value of clk_prepare_enable()
and return the error code if clk_prepare_enable() returns an
unexpected value.

Fixes: e9ec5c3bd238 ("net: dsa: bcm_sf2: request and handle clocks")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230726170506.16547-1-ruc_gongyuanjun@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtnetlink: let rtnl_bridge_setlink checks IFLA_BRIDGE_MODE length

[ Upstream commit d73ef2d69c0dba5f5a1cb9600045c873bab1fb7f ]

There are totally 9 ndo_bridge_setlink handlers in the current kernel,
which are 1) bnxt_bridge_setlink, 2) be_ndo_bridge_setlink 3)
i40e_ndo_bridge_setlink 4) ice_bridge_setlink 5)
ixgbe_ndo_bridge_setlink 6) mlx5e_bridge_setlink 7)
nfp_net_bridge_setlink 8) qeth_l2_bridge_setlink 9) br_setlink.

By investigating the code, we find that 1-7 parse and use nlattr
IFLA_BRIDGE_MODE but 3 and 4 forget to do the nla_len check. This can
lead to an out-of-attribute read and allow a malformed nlattr (e.g.,
length 0) to be viewed as a 2 byte integer.

To avoid such issues, also for other ndo_bridge_setlink handlers in the
future. This patch adds the nla_len check in rtnl_bridge_setlink and
does an early error return if length mismatches. To make it works, the
break is removed from the parsing for IFLA_BRIDGE_FLAGS to make sure
this nla_for_each_nested iterates every attribute.

Fixes: b1edc14a3fbf ("ice: Implement ice_bridge_getlink and ice_bridge_setlink")
Fixes: 51616018dd1b ("i40e: Add support for getlink, setlink ndo ops")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20230726075314.1059224-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Add length check for SK_DIAG_BPF_STORAGE_REQ_MAP_FD parsing

[ Upstream commit bcc29b7f5af6797702c2306a7aacb831fc5ce9cb ]

The nla_for_each_nested parsing in function bpf_sk_storage_diag_alloc
does not check the length of the nested attribute. This can lead to an
out-of-attribute read and allow a malformed nlattr (e.g., length 0) to
be viewed as a 4 byte integer.

This patch adds an additional check when the nlattr is getting counted.
This makes sure the latter nla_get_u32 can access the attributes with
the correct length.

Fixes: 1ed4d92458a9 ("bpf: INET_DIAG support in bpf_sk_storage")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230725023330.422856-1-linma@zju.edu.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Move representor neigh cleanup to profile cleanup_tx

[ Upstream commit d03b6e6f31820b84f7449cca022047f36c42bc3f ]

For IP tunnel encapsulation in ECMP (Equal-Cost Multipath) mode, as
the flow is duplicated to the peer eswitch, the related neighbour
information on the peer uplink representor is created as well.

In the cited commit, eswitch devcom unpair is moved to uplink unload
API, specifically the profile->cleanup_tx. If there is a encap rule
offloaded in ECMP mode, when one eswitch does unpair (because of
unloading the driver, for instance), and the peer rule from the peer
eswitch is going to be deleted, the use-after-free error is triggered
while accessing neigh info, as it is already cleaned up in uplink's
profile->disable, which is before its profile->cleanup_tx.

To fix this issue, move the neigh cleanup to profile's cleanup_tx
callback, and after mlx5e_cleanup_uplink_rep_tx is called. The neigh
init is moved to init_tx for symmeter.

[ 2453.376299] BUG: KASAN: slab-use-after-free in mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.379125] Read of size 4 at addr ffff888127af9008 by task modprobe/2496

[ 2453.381542] CPU: 7 PID: 2496 Comm: modprobe Tainted: G    B              6.4.0-rc7+ #15
[ 2453.383386] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 2453.384335] Call Trace:
[ 2453.384625]  <TASK>
[ 2453.384891]  dump_stack_lvl+0x33/0x50
[ 2453.385285]  print_report+0xc2/0x610
[ 2453.385667]  ? __virt_addr_valid+0xb1/0x130
[ 2453.386091]  ? mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.386757]  kasan_report+0xae/0xe0
[ 2453.387123]  ? mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.387798]  mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.388465]  mlx5e_rep_encap_entry_detach+0xa6/0xe0 [mlx5_core]
[ 2453.389111]  mlx5e_encap_dealloc+0xa7/0x100 [mlx5_core]
[ 2453.389706]  mlx5e_tc_tun_encap_dests_unset+0x61/0xb0 [mlx5_core]
[ 2453.390361]  mlx5_free_flow_attr_actions+0x11e/0x340 [mlx5_core]
[ 2453.391015]  ? complete_all+0x43/0xd0
[ 2453.391398]  ? free_flow_post_acts+0x38/0x120 [mlx5_core]
[ 2453.392004]  mlx5e_tc_del_fdb_flow+0x4ae/0x690 [mlx5_core]
[ 2453.392618]  mlx5e_tc_del_fdb_peers_flow+0x308/0x370 [mlx5_core]
[ 2453.393276]  mlx5e_tc_clean_fdb_peer_flows+0xf5/0x140 [mlx5_core]
[ 2453.393925]  mlx5_esw_offloads_unpair+0x86/0x540 [mlx5_core]
[ 2453.394546]  ? mlx5_esw_offloads_set_ns_peer.isra.0+0x180/0x180 [mlx5_core]
[ 2453.395268]  ? down_write+0xaa/0x100
[ 2453.395652]  mlx5_esw_offloads_devcom_event+0x203/0x530 [mlx5_core]
[ 2453.396317]  mlx5_devcom_send_event+0xbb/0x190 [mlx5_core]
[ 2453.396917]  mlx5_esw_offloads_devcom_cleanup+0xb0/0xd0 [mlx5_core]
[ 2453.397582]  mlx5e_tc_esw_cleanup+0x42/0x120 [mlx5_core]
[ 2453.398182]  mlx5e_rep_tc_cleanup+0x15/0x30 [mlx5_core]
[ 2453.398768]  mlx5e_cleanup_rep_tx+0x6c/0x80 [mlx5_core]
[ 2453.399367]  mlx5e_detach_netdev+0xee/0x120 [mlx5_core]
[ 2453.399957]  mlx5e_netdev_change_profile+0x84/0x170 [mlx5_core]
[ 2453.400598]  mlx5e_vport_rep_unload+0xe0/0xf0 [mlx5_core]
[ 2453.403781]  mlx5_eswitch_unregister_vport_reps+0x15e/0x190 [mlx5_core]
[ 2453.404479]  ? mlx5_eswitch_register_vport_reps+0x200/0x200 [mlx5_core]
[ 2453.405170]  ? up_write+0x39/0x60
[ 2453.405529]  ? kernfs_remove_by_name_ns+0xb7/0xe0
[ 2453.405985]  auxiliary_bus_remove+0x2e/0x40
[ 2453.406405]  device_release_driver_internal+0x243/0x2d0
[ 2453.406900]  ? kobject_put+0x42/0x2d0
[ 2453.407284]  bus_remove_device+0x128/0x1d0
[ 2453.407687]  device_del+0x240/0x550
[ 2453.408053]  ? waiting_for_supplier_show+0xe0/0xe0
[ 2453.408511]  ? kobject_put+0xfa/0x2d0
[ 2453.408889]  ? __kmem_cache_free+0x14d/0x280
[ 2453.409310]  mlx5_rescan_drivers_locked.part.0+0xcd/0x2b0 [mlx5_core]
[ 2453.409973]  mlx5_unregister_device+0x40/0x50 [mlx5_core]
[ 2453.410561]  mlx5_uninit_one+0x3d/0x110 [mlx5_core]
[ 2453.411111]  remove_one+0x89/0x130 [mlx5_core]
[ 2453.411628]  pci_device_remove+0x59/0xf0
[ 2453.412026]  device_release_driver_internal+0x243/0x2d0
[ 2453.412511]  ? parse_option_str+0x14/0x90
[ 2453.412915]  driver_detach+0x7b/0xf0
[ 2453.413289]  bus_remove_driver+0xb5/0x160
[ 2453.413685]  pci_unregister_driver+0x3f/0xf0
[ 2453.414104]  mlx5_cleanup+0xc/0x20 [mlx5_core]

Fixes: 2be5bd42a5bb ("net/mlx5: Handle pairing of E-switch via uplink un/load APIs")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Fix crash moving to switchdev mode when ntuple offload is set

[ Upstream commit 3ec43c1b082a8804472430e1253544d75f4b540e ]

Moving to switchdev mode with ntuple offload on causes the kernel to
crash since fs->arfs is freed during nic profile cleanup flow.

Ntuple offload is not supported in switchdev mode and it is already
unset by mlx5 fix feature ndo in switchdev mode. Verify fs->arfs is
valid before disabling it.

trace:
[] RIP: 0010:_raw_spin_lock_bh+0x17/0x30
[] arfs_del_rules+0x44/0x1a0 [mlx5_core]
[] mlx5e_arfs_disable+0xe/0x20 [mlx5_core]
[] mlx5e_handle_feature+0x3d/0xb0 [mlx5_core]
[] ? __rtnl_unlock+0x25/0x50
[] mlx5e_set_features+0xfe/0x160 [mlx5_core]
[] __netdev_update_features+0x278/0xa50
[] ? netdev_run_todo+0x5e/0x2a0
[] netdev_update_features+0x22/0x70
[] ? _cond_resched+0x15/0x30
[] mlx5e_attach_netdev+0x12a/0x1e0 [mlx5_core]
[] mlx5e_netdev_attach_profile+0xa1/0xc0 [mlx5_core]
[] mlx5e_netdev_change_profile+0x77/0xe0 [mlx5_core]
[] mlx5e_vport_rep_load+0x1ed/0x290 [mlx5_core]
[] mlx5_esw_offloads_rep_load+0x88/0xd0 [mlx5_core]
[] esw_offloads_load_rep.part.38+0x31/0x50 [mlx5_core]
[] esw_offloads_enable+0x6c5/0x710 [mlx5_core]
[] mlx5_eswitch_enable_locked+0x1bb/0x290 [mlx5_core]
[] mlx5_devlink_eswitch_mode_set+0x14f/0x320 [mlx5_core]
[] devlink_nl_cmd_eswitch_set_doit+0x94/0x120
[] genl_family_rcv_msg_doit.isra.17+0x113/0x150
[] genl_family_rcv_msg+0xb7/0x170
[] ? devlink_nl_cmd_port_split_doit+0x100/0x100
[] genl_rcv_msg+0x47/0xa0
[] ? genl_family_rcv_msg+0x170/0x170
[] netlink_rcv_skb+0x4c/0x130
[] genl_rcv+0x24/0x40
[] netlink_unicast+0x19a/0x230
[] netlink_sendmsg+0x204/0x3d0
[] sock_sendmsg+0x50/0x60

Fixes: 90b22b9bcd24 ("net/mlx5e: Disable Rx ntuple offload for uplink representor")
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: fix return value check in mlx5e_ipsec_remove_trailer()

[ Upstream commit e5bcb7564d3bd0c88613c76963c5349be9c511c5 ]

mlx5e_ipsec_remove_trailer() should return an error code if function
pskb_trim() returns an unexpected value.

Fixes: 2ac9cfe78223 ("net/mlx5e: IPSec, Add Innova IPSec offload TX data path")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: fix potential memory leak in mlx5e_init_rep_rx

[ Upstream commit c6cf0b6097bf1bf1b2a89b521e9ecd26b581a93a ]

The memory pointed to by the priv->rx_res pointer is not freed in the error
path of mlx5e_init_rep_rx, which can lead to a memory leak. Fix by freeing
the memory in the error path, thereby making the error path identical to
mlx5e_cleanup_rep_rx().

Fixes: af8bbf730068 ("net/mlx5e: Convert mlx5e_flow_steering member of mlx5e_priv to pointer")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: DR, fix memory leak in mlx5dr_cmd_create_reformat_ctx

[ Upstream commit 5dd77585dd9d0e03dd1bceb95f0269a7eaf6b936 ]

when mlx5_cmd_exec failed in mlx5dr_cmd_create_reformat_ctx, the memory
pointed by 'in' is not released, which will cause memory leak. Move memory
release after mlx5_cmd_exec.

Fixes: 1d9186476e12 ("net/mlx5: DR, Add direct rule command utilities")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: fix double free in macsec_fs_tx_create_crypto_table_groups

[ Upstream commit aeb660171b0663847fa04806a96302ac6112ad26 ]

In function macsec_fs_tx_create_crypto_table_groups(), when the ft->g
memory is successfully allocated but the 'in' memory fails to be
allocated, the memory pointed to by ft->g is released once. And in function
macsec_fs_tx_create(), macsec_fs_tx_destroy() is called to release the
memory pointed to by ft->g again. This will cause double free problem.

Fixes: e467b283ffd5 ("net/mlx5e: Add MACsec TX steering rules")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: cfg80211: Fix return value in scan logic

[ Upstream commit fd7f08d92fcd7cc3eca0dd6c853f722a4c6176df ]

The reporter noticed a warning when running iwlwifi:

WARNING: CPU: 8 PID: 659 at mm/page_alloc.c:4453 __alloc_pages+0x329/0x340

As cfg80211_parse_colocated_ap() is not expected to return a negative
value return 0 and not a negative value if cfg80211_calc_short_ssid()
fails.

Fixes: c8cb5b854b40f ("nl80211/cfg80211: support 6 GHz scanning")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217675
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230723201043.3007430-1-ilan.peer@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

erofs: fix wrong primary bvec selection on deduplicated extents

[ Upstream commit 94c43de73521d8ed7ebcfc6191d9dace1cbf7caa ]

When handling deduplicated compressed data, there can be multiple
decompressed extents pointing to the same compressed data in one shot.

In such cases, the bvecs which belong to the longest extent will be
selected as the primary bvecs for real decompressors to decode and the
other duplicated bvecs will be directly copied from the primary bvecs.

Previously, only relative offsets of the longest extent were checked to
decompress the primary bvecs.  On rare occasions, it can be incorrect
if there are several extents with the same start relative offset.
As a result, some short bvecs could be selected for decompression and
then cause data corruption.

For example, as Shijie Sun reported off-list, considering the following
extents of a file:
117:   903345..  915250 |   11905 :     385024..    389120 |    4096
...
119:   919729..  930323 |   10594 :     385024..    389120 |    4096
...
124:   968881..  980786 |   11905 :     385024..    389120 |    4096

The start relative offset is the same: 2225, but extent 119 (919729..
930323) is shorter than the others.

Let's restrict the bvec length in addition to the start offset if bvecs
are not full.

Reported-by: Shijie Sun <sunshijie@xiaomi.com>
Fixes: 5c2a64252c5d ("erofs: introduce partial-referenced pclusters")
Tested-by Shijie Sun <sunshijie@xiaomi.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230719065459.60083-1-hsiangkao@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: s390: fix sthyi error handling

[ Upstream commit 0c02cc576eac161601927b41634f80bfd55bfa9e ]

Commit 9fb6c9b3fea1 ("s390/sthyi: add cache to store hypervisor info")
added cache handling for store hypervisor info. This also changed the
possible return code for sthyi_fill().

Instead of only returning a condition code like the sthyi instruction would
do, it can now also return a negative error value (-ENOMEM). handle_styhi()
was not changed accordingly. In case of an error, the negative error value
would incorrectly injected into the guest PSW.

Add proper error handling to prevent this, and update the comment which
describes the possible return values of sthyi_fill().

Fixes: 9fb6c9b3fea1 ("s390/sthyi: add cache to store hypervisor info")
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20230727182939.2050744-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

word-at-a-time: use the same return type for has_zero regardless of endianness

[ Upstream commit 79e8328e5acbe691bbde029a52c89d70dcbc22f3 ]

Compiling big-endian targets with Clang produces the diagnostic:

  fs/namei.c:2173:13: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
} while (!(has_zero(a, &adata, &constants) | has_zero(b, &bdata, &constants)));
          ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                                               ||
  fs/namei.c:2173:13: note: cast one or both operands to int to silence this warning

It appears that when has_zero was introduced, two definitions were
produced with different signatures (in particular different return
types).

Looking at the usage in hash_name() in fs/namei.c, I suspect that
has_zero() is meant to be invoked twice per while loop iteration; using
logical-or would not update `bdata` when `a` did not have zeros.  So I
think it's preferred to always return an unsigned long rather than a
bool than update the while loop in hash_name() to use a logical-or
rather than bitwise-or.

[ Also changed powerpc version to do the same  - Linus ]

Link: https://github.com/ClangBuiltLinux/linux/issues/1832
Link: https://lore.kernel.org/lkml/20230801-bitwise-v1-1-799bec468dc4@google.com/
Fixes: 36126f8f2ed8 ("word-at-a-time: make the interfaces truly generic")
Debugged-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: arm_scmi: Fix chan_free cleanup on SMC

[ Upstream commit d1ff11d7ad8704f8d615f6446041c221b2d2ec4d ]

SCMI transport based on SMC can optionally use an additional IRQ to
signal message completion. The associated interrupt handler is currently
allocated using devres but on shutdown the core SCMI stack will call
.chan_free() well before any managed cleanup is invoked by devres.
As a consequence, the arrival of a late reply to an in-flight pending
transaction could still trigger the interrupt handler well after the
SCMI core has cleaned up the channels, with unpleasant results.

Inhibit further message processing on the IRQ path by explicitly freeing
the IRQ inside .chan_free() callback itself.

Fixes: dd820ee21d5e ("firmware: arm_scmi: Augment SMC/HVC to allow optional interrupt")
Reported-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230719173533.2739319-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib/bitmap: workaround const_eval test build failure

[ Upstream commit 2356d198d2b4ddec24efea98271cb3be230bc787 ]

When building with Clang, and when KASAN and GCOV_PROFILE_ALL are both
enabled, the test fails to build [1]:

>> lib/test_bitmap.c:920:2: error: call to '__compiletime_assert_239' declared with 'error' attribute: BUILD_BUG_ON failed: !__builtin_constant_p(res)
           BUILD_BUG_ON(!__builtin_constant_p(res));
           ^
   include/linux/build_bug.h:50:2: note: expanded from macro 'BUILD_BUG_ON'
           BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
           ^
   include/linux/build_bug.h:39:37: note: expanded from macro 'BUILD_BUG_ON_MSG'
   #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
                                       ^
   include/linux/compiler_types.h:352:2: note: expanded from macro 'compiletime_assert'
           _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
           ^
   include/linux/compiler_types.h:340:2: note: expanded from macro '_compiletime_assert'
           __compiletime_assert(condition, msg, prefix, suffix)
           ^
   include/linux/compiler_types.h:333:4: note: expanded from macro '__compiletime_assert'
                           prefix ## suffix();                             \
                           ^
   <scratch space>:185:1: note: expanded from here
   __compiletime_assert_239

Originally it was attributed to s390, which now looks seemingly wrong. The
issue is not related to bitmap code itself, but it breaks build for a given
configuration.

Disabling the const_eval test under that config may potentially hide other
bugs. Instead, workaround it by disabling GCOV for the test_bitmap unless
the compiler will get fixed.

[1] https://github.com/ClangBuiltLinux/linux/issues/1874

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307171254.yFcH97ej-lkp@intel.com/
Fixes: dc34d5036692 ("lib: test_bitmap: add compile-time optimization/evaluations assertions")
Co-developed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: smccc: Fix use of uninitialised results structure

[ Upstream commit d05799d7b4a39fa71c65aa277128ac7c843ffcdc ]

Commit 35727af2b15d ("irqchip/gicv3: Workaround for NVIDIA erratum
T241-FABRIC-4") moved the initialisation of the SoC version to
arm_smccc_version_init() but forgot to update the results structure
and it's usage.

Fix the use of the uninitialised results structure and update the
error strings.

Fixes: 35727af2b15d ("irqchip/gicv3: Workaround for NVIDIA erratum T241-FABRIC-4")
Signed-off-by: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Vikram Sethi <vsethi@nvidia.com>
Cc: Shanker Donthineni <sdonthineni@nvidia.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230717171702.424253-1-punit.agrawal@bytedance.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: freescale: Fix VPU G2 clock

[ Upstream commit b27bfc5103c72f84859bd32731b6a09eafdeda05 ]

Set VPU G2 clock to 300MHz like described in documentation.
This fixes pixels error occurring with large resolution ( >= 2560x1600)
HEVC test stream when using the postprocessor to produce NV12.

Fixes: 4ac7e4a81272 ("arm64: dts: imx8mq: Enable both G1 and G2 VPU's with vpu-blk-ctrl")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux

[ Upstream commit 253be5b53c2792fb4384f8005b05421e6f040ee3 ]

For SOMs with an onboard PHY, the RESET_N pull-up resistor is
currently deactivated in the pinmux configuration. When the pinmux
code selects the GPIO function for this pin, with a default direction
of input, this prevents the RESET_N pin from being taken to the proper
3.3V level (deasserted), and this results in the PHY being not
detected since it is held in reset.

Taken from RESET_N pin description in ADIN13000 datasheet:
This pin requires a 1K pull-up resistor to AVDD_3P3.

Activate the pull-up resistor to fix the issue.

Fixes: ade0176dd8a0 ("arm64: dts: imx8mn-var-som: Add Variscite VAR-SOM-MX8MN System on Module")
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: phycore-imx8mm: Correction in gpio-line-names

[ Upstream commit 1ef0aa137a96c5f0564f2db0c556a4f0f60ce8f5 ]

Remove unused nINT_ETHPHY entry from gpio-line-names in gpio1 nodes of
phyCORE-i.MX8MM and phyBOARD-Polis-i.MX8MM devicetrees.

Fixes: ae6847f26ac9 ("arm64: dts: freescale: Add phyBOARD-Polis-i.MX8MM support")
Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Cem Tenruh <c.tenruh@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: phycore-imx8mm: Label typo-fix of VPU

[ Upstream commit cddeefc1663294fb74b31ff5029a83c0e819ff3a ]

Corrected the label of the VPU regulator node (buck 3)
from reg_vdd_gpu to reg_vdd_vpu.

Fixes: ae6847f26ac9 ("arm64: dts: freescale: Add phyBOARD-Polis-i.MX8MM support")
Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Cem Tenruh <c.tenruh@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl

[ Upstream commit f7a0b57524cf811ac06257a5099f1b7c19ee7310 ]

The GW7904 does not connect the VDD_MIPI power rails thus MIPI is
disabled. However we must also disable disp_blk_ctrl as it uses the
pgc_mipi power domain and without it being disabled imx8m-blk-ctrl will
fail to probe:
imx8m-blk-ctrl 32e28000.blk-ctrl: error -ETIMEDOUT: failed to attach
power domain "mipi-dsi"
imx8m-blk-ctrl: probe of 32e28000.blk-ctrl failed with error -110

Fixes: b999bdaf0597 ("arm64: dts: imx: Add i.mx8mm Gateworks gw7904 dts support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl

[ Upstream commit 3e7d3c5e13b05dda9db92d98803a626378e75438 ]

The GW7903 does not connect the VDD_MIPI power rails thus MIPI is
disabled. However we must also disable disp_blk_ctrl as it uses the
pgc_mipi power domain and without it being disabled imx8m-blk-ctrl will
fail to probe:
imx8m-blk-ctrl 32e28000.blk-ctrl: error -ETIMEDOUT: failed to attach power domain "mipi-dsi"
imx8m-blk-ctrl: probe of 32e28000.blk-ctrl failed with error -110

Fixes: a72ba91e5bc7 ("arm64: dts: imx: Add i.mx8mm Gateworks gw7903 dts support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/arm-smmu-v3: Document nesting-related errata

commit 0bfbfc526c70606bf0fad302e4821087cbecfaf4 upstream

Both MMU-600 and MMU-700 have similar errata around TLB invalidation
while both stages of translation are active, which will need some
consideration once nesting support is implemented. For now, though,
it's very easy to make our implicit lack of nesting support explicit
for those cases, so they're less likely to be missed in future.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/696da78d32bb4491f898f11b0bb4d850a8aa7c6a.1683731256.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/arm-smmu-v3: Add explicit feature for nesting

commit 1d9777b9f3d55b4b6faf186ba4f1d6fb560c0523 upstream

In certain cases we may want to refuse to allow nested translation even
when both stages are implemented, so let's add an explicit feature for
nesting support which we can control in its own right. For now this
merely serves as documentation, but it means a nice convenient check
will be ready and waiting for the future nesting code.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/136c3f4a3a84cc14a5a1978ace57dfd3ed67b688.1683731256.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/arm-smmu-v3: Document MMU-700 erratum 2812531

commit 309a15cb16bb075da1c99d46fb457db6a1a2669e upstream

To work around MMU-700 erratum 2812531 we need to ensure that certain
sequences of commands cannot be issued without an intervening sync. In
practice this falls out of our current command-batching machinery
anyway - each batch only contains a single type of invalidation command,
and ends with a sync. The only exception is when a batch is sufficiently
large to need issuing across multiple command queue slots, wherein the
earlier slots will not contain a sync and thus may in theory interleave
with another batch being issued in parallel to create an affected
sequence across the slot boundary.

Since MMU-700 supports range invalidate commands and thus we will prefer
to use them (which also happens to avoid conditions for other errata),
I'm not entirely sure it's even possible for a single high-level
invalidate call to generate a batch of more than 63 commands, but for
the sake of robustness and documentation, wire up an option to enforce
that a sync is always inserted for every slot issued.

The other aspect is that the relative order of DVM commands cannot be
controlled, so DVM cannot be used. Again that is already the status quo,
but since we have at least defined ARM_SMMU_FEAT_BTM, we can explicitly
disable it for documentation purposes even if it's not wired up anywhere
yet.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/330221cdfd0003cd51b6c04e7ff3566741ad8374.1683731256.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/arm-smmu-v3: Work around MMU-600 erratum 1076982

commit f322e8af35c7f23a8c08b595c38d6c855b2d836f upstream

MMU-600 versions prior to r1p0 fail to correctly generate a WFE wakeup
event when the command queue transitions fom full to non-full. We can
easily work around this by simply hiding the SEV capability such that we
fall back to polling for space in the queue - since MMU-600 implements
MSIs we wouldn't expect to need SEV for sync completion either, so this
should have little to no impact.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/08adbe3d01024d8382a478325f73b56851f76e49.1683731256.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipa: only reset hashed tables when supported

commit e11ec2b868af2b351c6c1e2e50eb711cc5423a10 upstream.

Last year, the code that manages GSI channel transactions switched
from using spinlock-protected linked lists to using indexes into the
ring buffer used for a channel.  Recently, Google reported seeing
transaction reference count underflows occasionally during shutdown.

Doug Anderson found a way to reproduce the issue reliably, and
bisected the issue to the commit that eliminated the linked lists
and the lock.  The root cause was ultimately determined to be
related to unused transactions being committed as part of the modem
shutdown cleanup activity.  Unused transactions are not normally
expected (except in error cases).

The modem uses some ranges of IPA-resident memory, and whenever it
shuts down we zero those ranges.  In ipa_filter_reset_table() a
transaction is allocated to zero modem filter table entries.  If
hashing is not supported, hashed table memory should not be zeroed.
But currently nothing prevents that, and the result is an unused
transaction.  Something similar occurs when we zero routing table
entries for the modem.

By preventing any attempt to clear hashed tables when hashing is not
supported, the reference count underflow is avoided in this case.

Note that there likely remains an issue with properly freeing unused
transactions (if they occur due to errors).  This patch addresses
only the underflows that Google originally reported.

Cc: <stable@vger.kernel.org> # 6.1.x
Fixes: d338ae28d8a8 ("net: ipa: kill all other transaction lists")
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20230724224055.1688854-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: Free irqs only on shutdown callback

commit 9c2d08010963a61a171e8cb2852d3ce015b60cb4 upstream.

Whenever a shutdown is invoked, free irqs only and keep mlx5_irq
synthetic wrapper intact in order to avoid use-after-free on
system shutdown.

for example:
==================================================================
BUG: KASAN: use-after-free in _find_first_bit+0x66/0x80
Read of size 8 at addr ffff88823fc0d318 by task kworker/u192:0/13608

CPU: 25 PID: 13608 Comm: kworker/u192:0 Tainted: G    B   W  O  6.1.21-cloudflare-kasan-2023.3.21 #1
Hardware name: GIGABYTE R162-R2-GEN0/MZ12-HD2-CD, BIOS R14 05/03/2021
Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core]
Call Trace:
  <TASK>
  dump_stack_lvl+0x34/0x48
  print_report+0x170/0x473
  ? _find_first_bit+0x66/0x80
  kasan_report+0xad/0x130
  ? _find_first_bit+0x66/0x80
  _find_first_bit+0x66/0x80
  mlx5e_open_channels+0x3c5/0x3a10 [mlx5_core]
  ? console_unlock+0x2fa/0x430
  ? _raw_spin_lock_irqsave+0x8d/0xf0
  ? _raw_spin_unlock_irqrestore+0x42/0x80
  ? preempt_count_add+0x7d/0x150
  ? __wake_up_klogd.part.0+0x7d/0xc0
  ? vprintk_emit+0xfe/0x2c0
  ? mlx5e_trigger_napi_sched+0x40/0x40 [mlx5_core]
  ? dev_attr_show.cold+0x35/0x35
  ? devlink_health_do_dump.part.0+0x174/0x340
  ? devlink_health_report+0x504/0x810
  ? mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core]
  ? mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core]
  ? process_one_work+0x680/0x1050
  mlx5e_safe_switch_params+0x156/0x220 [mlx5_core]
  ? mlx5e_switch_priv_channels+0x310/0x310 [mlx5_core]
  ? mlx5_eq_poll_irq_disabled+0xb6/0x100 [mlx5_core]
  mlx5e_tx_reporter_timeout_recover+0x123/0x240 [mlx5_core]
  ? __mutex_unlock_slowpath.constprop.0+0x2b0/0x2b0
  devlink_health_reporter_recover+0xa6/0x1f0
  devlink_health_report+0x2f7/0x810
  ? vsnprintf+0x854/0x15e0
  mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core]
  ? mlx5e_reporter_tx_err_cqe+0x1a0/0x1a0 [mlx5_core]
  ? mlx5e_tx_reporter_timeout_dump+0x50/0x50 [mlx5_core]
  ? mlx5e_tx_reporter_dump_sq+0x260/0x260 [mlx5_core]
  ? newidle_balance+0x9b7/0xe30
  ? psi_group_change+0x6a7/0xb80
  ? mutex_lock+0x96/0xf0
  ? __mutex_lock_slowpath+0x10/0x10
  mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core]
  process_one_work+0x680/0x1050
  worker_thread+0x5a0/0xeb0
  ? process_one_work+0x1050/0x1050
  kthread+0x2a2/0x340
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork+0x22/0x30
  </TASK>

Freed by task 1:
  kasan_save_stack+0x23/0x50
  kasan_set_track+0x21/0x30
  kasan_save_free_info+0x2a/0x40
  ____kasan_slab_free+0x169/0x1d0
  slab_free_freelist_hook+0xd2/0x190
  __kmem_cache_free+0x1a1/0x2f0
  irq_pool_free+0x138/0x200 [mlx5_core]
  mlx5_irq_table_destroy+0xf6/0x170 [mlx5_core]
  mlx5_core_eq_free_irqs+0x74/0xf0 [mlx5_core]
  shutdown+0x194/0x1aa [mlx5_core]
  pci_device_shutdown+0x75/0x120
  device_shutdown+0x35c/0x620
  kernel_restart+0x60/0xa0
  __do_sys_reboot+0x1cb/0x2c0
  do_syscall_64+0x3b/0x90
  entry_SYSCALL_64_after_hwframe+0x4b/0xb5

The buggy address belongs to the object at ffff88823fc0d300
  which belongs to the cache kmalloc-192 of size 192
The buggy address is located 24 bytes inside of
  192-byte region [ffff88823fc0d300, ffff88823fc0d3c0)

The buggy address belongs to the physical page:
page:0000000010139587 refcount:1 mapcount:0 mapping:0000000000000000
index:0x0 pfn:0x23fc0c
head:0000000010139587 order:1 compound_mapcount:0 compound_pincount:0
flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff)
raw: 002ffff800010200 0000000000000000 dead000000000122 ffff88810004ca00
raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
  ffff88823fc0d200: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff88823fc0d280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff88823fc0d300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                             ^
  ffff88823fc0d380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
  ffff88823fc0d400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
general protection fault, probably for non-canonical address
0xdffffc005c40d7ac: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: probably user-memory-access in range [0x00000002e206bd60-0x00000002e206bd67]
CPU: 25 PID: 13608 Comm: kworker/u192:0 Tainted: G    B   W  O  6.1.21-cloudflare-kasan-2023.3.21 #1
Hardware name: GIGABYTE R162-R2-GEN0/MZ12-HD2-CD, BIOS R14 05/03/2021
Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core]
RIP: 0010:__alloc_pages+0x141/0x5c0
Call Trace:
  <TASK>
  ? sysvec_apic_timer_interrupt+0xa0/0xc0
  ? asm_sysvec_apic_timer_interrupt+0x16/0x20
  ? __alloc_pages_slowpath.constprop.0+0x1ec0/0x1ec0
  ? _raw_spin_unlock_irqrestore+0x3d/0x80
  __kmalloc_large_node+0x80/0x120
  ? kvmalloc_node+0x4e/0x170
  __kmalloc_node+0xd4/0x150
  kvmalloc_node+0x4e/0x170
  mlx5e_open_channels+0x631/0x3a10 [mlx5_core]
  ? console_unlock+0x2fa/0x430
  ? _raw_spin_lock_irqsave+0x8d/0xf0
  ? _raw_spin_unlock_irqrestore+0x42/0x80
  ? preempt_count_add+0x7d/0x150
  ? __wake_up_klogd.part.0+0x7d/0xc0
  ? vprintk_emit+0xfe/0x2c0
  ? mlx5e_trigger_napi_sched+0x40/0x40 [mlx5_core]
  ? dev_attr_show.cold+0x35/0x35
  ? devlink_health_do_dump.part.0+0x174/0x340
  ? devlink_health_report+0x504/0x810
  ? mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core]
  ? mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core]
  ? process_one_work+0x680/0x1050
  mlx5e_safe_switch_params+0x156/0x220 [mlx5_core]
  ? mlx5e_switch_priv_channels+0x310/0x310 [mlx5_core]
  ? mlx5_eq_poll_irq_disabled+0xb6/0x100 [mlx5_core]
  mlx5e_tx_reporter_timeout_recover+0x123/0x240 [mlx5_core]
  ? __mutex_unlock_slowpath.constprop.0+0x2b0/0x2b0
  devlink_health_reporter_recover+0xa6/0x1f0
  devlink_health_report+0x2f7/0x810
  ? vsnprintf+0x854/0x15e0
  mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core]
  ? mlx5e_reporter_tx_err_cqe+0x1a0/0x1a0 [mlx5_core]
  ? mlx5e_tx_reporter_timeout_dump+0x50/0x50 [mlx5_core]
  ? mlx5e_tx_reporter_dump_sq+0x260/0x260 [mlx5_core]
  ? newidle_balance+0x9b7/0xe30
  ? psi_group_change+0x6a7/0xb80
  ? mutex_lock+0x96/0xf0
  ? __mutex_lock_slowpath+0x10/0x10
  mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core]
  process_one_work+0x680/0x1050
  worker_thread+0x5a0/0xeb0
  ? process_one_work+0x1050/0x1050
  kthread+0x2a2/0x340
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork+0x22/0x30
  </TASK>
---[ end trace 0000000000000000  ]---
RIP: 0010:__alloc_pages+0x141/0x5c0
Code: e0 39 a3 96 89 e9 b8 22 01 32 01 83 e1 0f 48 89 fa 01 c9 48 c1 ea
03 d3 f8 83 e0 03 89 44 24 6c 48 b8 00 00 00 00 00 fc ff df <80> 3c 02
00 0f 85 fc 03 00 00 89 e8 4a 8b 14 f5 e0 39 a3 96 4c 89
RSP: 0018:ffff888251f0f438 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 1ffff1104a3e1e8b RCX: 0000000000000000
RDX: 000000005c40d7ac RSI: 0000000000000003 RDI: 00000002e206bd60
RBP: 0000000000052dc0 R08: ffff8882b0044218 R09: ffff8882b0045e8a
R10: fffffbfff300fefc R11: ffff888167af4000 R12: 0000000000000003
R13: 0000000000000000 R14: 00000000696c7070 R15: ffff8882373f4380
FS:  0000000000000000(0000) GS:ffff88bf2be80000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005641d031eee8 CR3: 0000002e7ca14000 CR4: 0000000000350ee0
Kernel panic - not syncing: Fatal exception
Kernel Offset: 0x11000000 from 0xffffffff81000000 (relocation range:
0xffffffff80000000-0xffffffffbfffffff)
---[ end Kernel panic - not syncing: Fatal exception  ]---]

Reported-by: Frederick Lawler <fred@cloudflare.com>
Link: https://lore.kernel.org/netdev/be5b9271-7507-19c5-ded1-fa78f1980e69@cloudflare.com
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
[hardik: Refer to the irqn member of the mlx5_irq struct, instead of
the msi_map, since we don't have upstream v6.4 commit 235a25fe28de
("net/mlx5: Modify struct mlx5_irq to use struct msi_map")].
[hardik: Refer to the pf_pool member of the mlx5_irq_table struct,
instead of pcif_pool, since we don't have upstream v6.4 commit
8bebfd767909 ("net/mlx5: Improve naming of pci function vectors")].
Signed-off-by: Hardik Garg <hargar@linux.microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf: Fix function pointer case

commit 1af6239d1d3e61d33fd2f0ba53d3d1a67cc50574 upstream.

With the advent of CFI it is no longer acceptible to cast function
pointers.

The robot complains thusly:

kernel-events-core.c:warning:cast-from-int-(-)(struct-perf_cpu_pmu_context-)-to-remote_function_f-(aka-int-(-)(void-)-)-converts-to-incompatible-function-type

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: gate iowait schedule on having pending requests

Commit 7b72d661f1f2f950ab8c12de7e2bc48bdac8ed69 upstream.

A previous commit made all cqring waits marked as iowait, as a way to
improve performance for short schedules with pending IO. However, for
use cases that have a special reaper thread that does nothing but
wait on events on the ring, this causes a cosmetic issue where we
know have one core marked as being "busy" with 100% iowait.

While this isn't a grave issue, it is confusing to users. Rather than
always mark us as being in iowait, gate setting of current->in_iowait
to 1 by whether or not the waiting task has pending requests.

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/io-uring/CAMEGJJ2RxopfNQ7GNLhr7X9=bHXKo+G5OOe0LUq=+UgLXsv1Xg@mail.gmail.com/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217699
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217700
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reported-by: Phil Elwell <phil@raspberrypi.com>
Tested-by: Andres Freund <andres@anarazel.de>
Fixes: 8a796565cec3 ("io_uring: Use io_schedule* in cqring wait")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>