f2fs: judge whether discard_unit is section only when have CONFIG_BLK_DEV_ZONED

[ Upstream commit b5a711acab305e04278c136c841ba37c589c16a1 ]

The current logic, regardless of whether CONFIG_BLK_DEV_ZONED
is enabled or not, will judge whether discard_unit is SECTION,
when f2fs_sb_has_blkzoned.

In fact, when CONFIG_BLK_DEV_ZONED is not enabled, this judgment
is a path that will never be accessed. At this time, -EINVAL will
be returned in the parse_options function, accompanied by the
message "Zoned block device support is not enabled".

Let's wrap this discard_unit judgment with CONFIG_BLK_DEV_ZONED.

Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 2bd4df8fcbc7 ("f2fs: Only lfs mode is allowed with zoned block device feature")
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to avoid mmap vs set_compress_option case

[ Upstream commit b5ab3276eb69cacf44ecfb11b2bfab73096ff4e4 ]

Compression option in inode should not be changed after they have
been used, however, it may happen in below race case:

Thread A Thread B
- f2fs_ioc_set_compress_option
 - check f2fs_is_mmap_file()
 - check get_dirty_pages()
 - check F2FS_HAS_BLOCKS()
- f2fs_file_mmap
 - set_inode_flag(FI_MMAP_FILE)
- fault
 - do_page_mkwrite
  - f2fs_vm_page_mkwrite
  - f2fs_get_block_locked
 - fault_dirty_shared_page
  - set_page_dirty
 - update i_compress_algorithm
 - update i_log_cluster_size
 - update i_cluster_size

Avoid such race condition by covering f2fs_file_mmap() w/ i_sem lock,
meanwhile add mmap file check condition in f2fs_may_compress() as well.

Fixes: e1e8debec656 ("f2fs: add F2FS_IOC_SET_COMPRESS_OPTION ioctl")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: i2c: rdacm21: Fix uninitialized value

[ Upstream commit 33c7ae8f49e3413c81e879e1fdfcea4c5516e37b ]

Fix the following smatch warning:

drivers/media/i2c/rdacm21.c:373 ov10640_check_id() error: uninitialized
symbol 'val'.

Initialize 'val' to 0 in the ov10640_check_id() function.

Fixes: 2b821698dc73 ("media: i2c: rdacm21: Power up OV10640 before OV490")
Reported-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov2680: Fix regulators being left enabled on ov2680_power_on() errors

[ Upstream commit 84b4bd7e0d98166aa32fd470e672721190492eae ]

When the ov2680_power_on() "sensor soft reset failed" path is hit during
probe() the WARN() about putting an enabled regulator at
drivers/regulator/core.c:2398 triggers 3 times (once for each regulator),
filling dmesg with backtraces.

Fix this by properly disabling the regulators on ov2680_power_on() errors.

Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov2680: Fix ov2680_set_fmt() which == V4L2_SUBDEV_FORMAT_TRY not working

[ Upstream commit c0e97a4b4f20639f74cd5809b42ba6cbf9736a7d ]

ov2680_set_fmt() which == V4L2_SUBDEV_FORMAT_TRY was getting
the try_fmt v4l2_mbus_framefmt struct from the passed in sd_state
and then storing the contents of that into the return by reference
format->format struct.

While the right thing to do would be filling format->format based on
the just looked up mode and then store the results of that in
sd_state->pads[0].try_fmt .

Before the previous change introducing ov2680_fill_format() this
resulted in ov2680_set_fmt() which == V4L2_SUBDEV_FORMAT_TRY always
returning the zero-ed out sd_state->pads[0].try_fmt in format->format
breaking callers using this.

After the introduction of ov2680_fill_format() which at least
initializes sd_state->pads[0].try_fmt properly, format->format
is now always being filled with the default 800x600 mode set by
ov2680_init_cfg() independent of the actual requested mode.

Move the filling of format->format with ov2680_fill_format() to
before the if (which == V4L2_SUBDEV_FORMAT_TRY) and then store
the filled in format->format in sd_state->pads[0].try_fmt to
fix this.

Note this removes the fmt local variable because IMHO having a local
variable which points to a sub-struct of one of the function arguments
just leads to confusion when reading the code.

Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver")
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov2680: Add ov2680_fill_format() helper function

[ Upstream commit 6d6849b2203f3244b575ba01d3e41ee19aa2cadf ]

Add a ov2680_fill_format() helper function and use this everywhere were
a v4l2_mbus_framefmt struct needs to be filled in so that the driver always
fills it consistently.

This is a preparation patch for fixing ov2680_set_fmt()
which == V4L2_SUBDEV_FORMAT_TRY calls not properly filling in
the passed in v4l2_mbus_framefmt struct.

Note that for ov2680_init_cfg() this now simply always fills
the try_fmt struct of the passed in sd_state. This is correct because
ov2680_init_cfg() is never called with a NULL sd_state so the old
sd_state check is not necessary.

Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver")
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov2680: Don't take the lock for try_fmt calls

[ Upstream commit e521b9cc1a49de677f4fc65909ce4877fbf7b113 ]

On ov2680_set_fmt() calls with format->which == V4L2_SUBDEV_FORMAT_TRY,
ov2680_set_fmt() does not talk to the sensor.

So in this case there is no need to lock the sensor->lock mutex or
to check that the sensor is streaming.

Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver")
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov2680: Remove VIDEO_V4L2_SUBDEV_API ifdef-s

[ Upstream commit 49c282d5a8c5f4d1d9088622bec792294c716010 ]

VIDEO_V4L2_SUBDEV_API is now automatically selected in Kconfig
for all sensor drivers. Remove the ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
checks.

This is a preparation patch for fixing ov2680_set_fmt()
which == V4L2_SUBDEV_FORMAT_TRY calls not properly filling in
the passed in v4l2_mbus_framefmt struct.

Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov2680: Fix vflip / hflip set functions

[ Upstream commit d5d08ad330c9ccebc5e066fda815423a290f48b0 ]

ov2680_vflip_disable() / ov2680_hflip_disable() pass BIT(0) instead of
0 as value to ov2680_mod_reg().

While fixing this also:

1. Stop having separate enable/disable functions for hflip / vflip
2. Move the is_streaming check, which is unique to hflip / vflip
   into the ov2680_set_?flip() functions.

for a nice code cleanup.

Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov2680: Fix ov2680_bayer_order()

[ Upstream commit 50a7bad4e0a37d7018ab6fe843dd84bc6b2ecf72 ]

The index into ov2680_hv_flip_bayer_order[] should be 0-3, but
ov2680_bayer_order() was using 0 + BIT(2) + (BIT(2) << 1) as
max index, while the intention was to use: 0 + 1 + 2 as max index.

Fix the index calculation in ov2680_bayer_order(), while at it
also just use the ctrl values rather then reading them back using
a slow i2c-read transaction.

This also allows making the function void, since there now are
no more i2c-reads to error check.

Note the check for the ctrls being NULL is there to allow
adding an ov2680_fill_format() helper later, which will call
ov2680_set_bayer_order() during probe() before the ctrls are created.

[Sakari Ailus: Change all users of ov2680_set_bayer_order() here]

Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov2680: Remove auto-gain and auto-exposure controls

[ Upstream commit 7b5a42e6ae71927359ea67a2c22570ba97fa4059 ]

Quoting the OV2680 datasheet:

"3.2 exposure and gain control

In the OV2680, the exposure time and gain are set manually from an external
controller. The OV2680 supports manual gain and exposure control only for
normal applications, no auto mode."

And indeed testing with the atomisp_ov2680 fork of ov2680.c has shown that
auto-exposure and auto-gain do not work.

Note that the code setting the auto-exposure flag was broken, callers
of ov2680_exposure_set() were directly passing !!ctrls->auto_exp->val as
"bool auto_exp" value, but ctrls->auto_exp is a menu control with:

enum  v4l2_exposure_auto_type {
        V4L2_EXPOSURE_AUTO = 0,
        V4L2_EXPOSURE_MANUAL = 1,
...

So instead of passing !!ctrls->auto_exp->val they should have been passing
ctrls->auto_exp->val == V4L2_EXPOSURE_AUTO, iow the passed value was
inverted of what it should have been.

Also remove ov2680_g_volatile_ctrl() since without auto support the gain
and exposure controls are not volatile.

This also fixes the control values not being properly applied in
ov2680_mode_set(). The 800x600 mode register-list also sets gain,
exposure and vflip overriding the last set ctrl values.

ov2680_mode_set() does call ov2680_gain_set() and ov2680_exposure_set()
but did this before writing the mode register-list, so these values
would still be overridden by the mode register-list.

Add a v4l2_ctrl_handler_setup() call after writing the mode register-list
to restore all ctrl values. Also remove the ctrls->gain->is_new check from
ov2680_gain_set() so that the gain always gets restored properly.

Last since ov2680_mode_set() now calls v4l2_ctrl_handler_setup(), remove
the v4l2_ctrl_handler_setup() call after ov2680_mode_restore() since
ov2680_mode_restore() calls ov2680_mode_set().

Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: i2c: ov2680: Set V4L2_CTRL_FLAG_MODIFY_LAYOUT on flips

[ Upstream commit 66274280b2c745d380508dc27b9a4dfd736e5eda ]

The driver changes the Bayer order based on the flips, but
does not define the control correctly with the
V4L2_CTRL_FLAG_MODIFY_LAYOUT flag.

Add the V4L2_CTRL_FLAG_MODIFY_LAYOUT flag.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stable-dep-of: 7b5a42e6ae71 ("media: ov2680: Remove auto-gain and auto-exposure controls")
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov5640: Fix initial RESETB state and annotate timings

[ Upstream commit a210df337c5f5c2cd82f36c9dbb154ec63365c80 ]

The initial state of RESETB input signal of OV5640 should be
asserted, i.e. the sensor should be in reset. This is not the
case, make it so.

Since the subsequent assertion of RESETB signal is no longer
necessary and the timing of the power sequencing could be
slightly adjusted, add annotations to the delays which match
OV5640 datasheet rev. 2.03, both:
  figure 2-3 power up timing with internal DVDD
  figure 2-4 power up timing with external DVDD source

The 5..10ms delay between PWDN assertion and RESETB assertion
is not even documented in the power sequencing diagram, and
with this reset fix, it is no longer even necessary.

Fixes: 19a81c1426c1 ("[media] add Omnivision OV5640 sensor driver")
Reported-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov5640: Enable MIPI interface in ov5640_set_power_mipi()

[ Upstream commit 98cb72d3b9c5e03b10fa993752ecfcbd9c572d8c ]

Set OV5640_REG_IO_MIPI_CTRL00 bit 2 to 1 instead of 0, since 1 means
MIPI CSI2 interface, while 0 means CPI parallel interface.

In the ov5640_set_power_mipi() the interface should obviously be set
to MIPI CSI2 since this functions is used to power up the sensor when
operated in MIPI CSI2 mode. The sensor should not be in CPI mode in
that case.

This fixes a corner case where capturing the first frame on i.MX8MN
with CSI/ISI resulted in corrupted frame.

Fixes: aa4bb8b8838f ("media: ov5640: Re-work MIPI startup sequence")
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> # [Test on imx6q]
Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Jai Luthra <j-luthra@ti.com> # [Test on bplay, sk-am62]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: input: Support devices sending Eraser without Invert

[ Upstream commit 276e14e6c3993317257e1787e93b7166fbc30905 ]

Some digitizers (notably XP-Pen Artist 24) do not report the Invert
usage when erasing.  This causes the device to be permanently stuck with
the BTN_TOOL_RUBBER tool after sending Eraser, as Invert is the only
usage that can release the tool.  In this state, Touch and Inrange are
no longer reported to userspace, rendering the pen unusable.

Prior to commit 87562fcd1342 ("HID: input: remove the need for
HID_QUIRK_INVERT"), BTN_TOOL_RUBBER was never set and Eraser events were
simply translated into BTN_TOUCH without causing an inconsistent state.

Introduce HID_QUIRK_NOINVERT for such digitizers and detect them during
hidinput_configure_usage().  This quirk causes the tool to be released
as soon as Eraser is reported as not set.  Set BTN_TOOL_RUBBER in
input->keybit when mapping Eraser.

Fixes: 87562fcd1342 ("HID: input: remove the need for HID_QUIRK_INVERT")
Co-developed-by: Nils Fuhler <nils@nilsfuhler.de>
Signed-off-by: Nils Fuhler <nils@nilsfuhler.de>
Signed-off-by: Illia Ostapyshyn <ostapyshyn@sra.uni-hannover.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: base: Free devm resources when unregistering a device

[ Upstream commit 699fb50d99039a50e7494de644f96c889279aca3 ]

In the current code, devres_release_all() only gets called if the device
has a bus and has been probed.

This leads to issues when using bus-less or driver-less devices where
the device might never get freed if a managed resource holds a reference
to the device. This is happening in the DRM framework for example.

We should thus call devres_release_all() in the device_del() function to
make sure that the device-managed actions are properly executed when the
device is unregistered, even if it has neither a bus nor a driver.

This is effectively the same change than commit 2f8d16a996da ("devres:
release resources on device_del()") that got reverted by commit
a525a3ddeaca ("driver core: free devres in device_release") over
memory leaks concerns.

This patch effectively combines the two commits mentioned above to
release the resources both on device_del() and device_release() and get
the best of both worlds.

Fixes: a525a3ddeaca ("driver core: free devres in device_release")
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230720-kunit-devm-inconsistencies-test-v3-3-6aa7e074f373@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: gadget: f_mass_storage: Fix unused variable warning

[ Upstream commit 55c3e571d2a0aabef4f1354604443f1c415d2e85 ]

Fix a "variable set but not used" warning in f_mass_storage.c.  rc is
used if verbose debugging is enabled but not otherwise.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: d5e2b67aae79 ("USB: g_mass_storage: template f_mass_storage.c file created")
Link: https://lore.kernel.org/r/cfed16c7-aa46-494b-ba84-b0e0dc99be3a@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: gadget: core: Add missing kerneldoc for vbus_work

[ Upstream commit 159a98afc88e88f588077afe818081d67f50a5e0 ]

Add a missing kerneldoc description of the vbus_work field in struct usb_udc.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: 50966da807c8 ("usb: gadget: udc: core: Offload usb_udc_vbus_handler processing")
Link: https://lore.kernel.org/r/1e5e7cda-b2c8-4917-9952-4354f365ede0@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

docs: ABI: fix spelling/grammar in SBEFIFO timeout interface

[ Upstream commit 2cd9ec2a51474d4c0b4d2a061f2de7da34eff476 ]

Correct spelling problems as identified by codespell.
Correct one grammar error.

Fixes: 9a93de620e0a ("docs: ABI: testing: Document the SBEFIFO timeout interface")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Eddie James <eajames@linux.ibm.com>
Cc: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230710052305.29611-1-rdunlap@infradead.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: venus: hfi_venus: Only consider sys_idle_indicator on V1

[ Upstream commit 6283e4834c69fa93a108efa18c6aa09c7e626f49 ]

As per information from Qualcomm [1], this property is not really
supported beyond msm8916 (HFI V1) and some newer HFI versions really
dislike receiving it, going as far as crashing the device.

Only consider toggling it (via the module option) on HFIV1.
While at it, get rid of the global static variable (which defaulted
to zero) which was never explicitly assigned to for V1.

Note: [1] is a reply to the actual message in question, as lore did not
properly receive some of the emails..

[1] https://lore.kernel.org/lkml/955cd520-3881-0c22-d818-13fe9a47e124@linaro.org/
Fixes: 7ed9e0b3393c ("media: venus: hfi, vdec: v6 Add IS_V6() to existing IS_V4() if locations")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: go7007: Remove redundant if statement

[ Upstream commit f33cb49081da0ec5af0888f8ecbd566bd326eed1 ]

The if statement that compares msgs[i].len != 3 is always false because
it is in a code block where msg[i].len is equal to 3. The check is
redundant and can be removed.

As detected by cppcheck static analysis:
drivers/media/usb/go7007/go7007-i2c.c:168:20: warning: Opposite inner
'if' condition leads to a dead code block. [oppositeInnerCondition]

Link: https://lore.kernel.org/linux-media/20230727174007.635572-1-colin.i.king@gmail.com
Fixes: 866b8695d67e ("Staging: add the go7007 video driver")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cec: core: add adap_unconfigured() callback

[ Upstream commit 948a77aaecf202f722cf2264025f9987e5bd5c26 ]

The adap_configured() callback was called with the adap->lock mutex
held if the 'configured' argument was false, and without the adap->lock
mutex held if that argument was true.

That was very confusing, and so split this up in a adap_unconfigured()
callback and a high-level configured() callback.

This also makes it easier to understand when the mutex is held: all
low-level adap_* callbacks are called with the mutex held. All other
callbacks are called without that mutex held.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: f1b57164305d ("media: cec: add optional adap_configured callback")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cec: core: add adap_nb_transmit_canceled() callback

[ Upstream commit da53c36ddd3f118a525a04faa8c47ca471e6c467 ]

A potential deadlock was found by Zheng Zhang with a local syzkaller
instance.

The problem is that when a non-blocking CEC transmit is canceled by calling
cec_data_cancel, that in turn can call the high-level received() driver
callback, which can call cec_transmit_msg() to transmit a new message.

The cec_data_cancel() function is called with the adap->lock mutex held,
and cec_transmit_msg() tries to take that same lock.

The root cause is that the received() callback can either be used to pass
on a received message (and then adap->lock is not held), or to report a
canceled transmit (and then adap->lock is held).

This is confusing, so create a new low-level adap_nb_transmit_canceled
callback that reports back that a non-blocking transmit was canceled.

And the received() callback is only called when a message is received,
as was the case before commit f9d0ecbf56f4 ("media: cec: correctly pass
on reply results") complicated matters.

Reported-by: Zheng Zhang <zheng.zhang@email.ucr.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: f9d0ecbf56f4 ("media: cec: correctly pass on reply results")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: dell-sysman: Fix reference leak

[ Upstream commit 7295a996fdab7bf83dc3d4078fa8b139b8e0a1bf ]

If a duplicate attribute is found using kset_find_obj(),
a reference to that attribute is returned. This means
that we need to dispose it accordingly. Use kobject_put()
to dispose the duplicate attribute in such a case.

Compile-tested only.

Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230805053610.7106-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Fix to flush cache of PASID directory table

[ Upstream commit 8a3b8e63f8371c1247b7aa24ff9c5312f1a6948b ]

Even the PCI devices don't support pasid capability, PASID table is
mandatory for a PCI device in scalable mode. However flushing cache
of pasid directory table for these devices are not taken after pasid
table is allocated as the "size" of table is zero. Fix it by
calculating the size by page order.

Found this when reading the code, no real problem encountered for now.

Fixes: 194b3348bdbb ("iommu/vt-d: Fix PASID directory pointer coherency")
Suggested-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Yanfei Xu <yanfei.xu@intel.com>
Link: https://lore.kernel.org/r/20230616081045.721873-1-yanfei.xu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/qcom: Disable and reset context bank before programming

[ Upstream commit 9f3fef23d9b5a858a6e6d5f478bb1b6b76265e76 ]

Writing the new TTBRs, TCRs and MAIRs on a previously enabled
context bank may trigger a context fault, resulting in firmware
driven AP resets: change the domain initialization programming
sequence to disable the context bank(s) and to also clear the
related fault address (CB_FAR) and fault status (CB_FSR)
registers before writing new values to TTBR0/1, TCR/TCR2, MAIR0/1.

Fixes: 0ae349a0f33f ("iommu/qcom: Add qcom_iommu")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622092742.74819-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fsi: aspeed: Reset master errors after CFAM reset

[ Upstream commit 52300909f4670ac552bfeb33c1355b896eac8c06 ]

It has been observed that sometimes the FSI master will return all 0xffs
after a CFAM has been taken out of reset, without presenting any error.
Resetting the FSI master errors resolves the issue.

Fixes: 4a851d714ead ("fsi: aspeed: Support CFAM reset GPIO")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20230612195657.245125-8-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/uverbs: Fix an potential error pointer dereference

[ Upstream commit 26b7d1a27167e7adf75b150755e05d2bc123ce55 ]

smatch reports the warning below:
drivers/infiniband/core/uverbs_std_types_counters.c:110
ib_uverbs_handler_UVERBS_METHOD_COUNTERS_READ() error: 'uattr'
dereferencing possible ERR_PTR()

The return value of uattr maybe ERR_PTR(-ENOENT), fix this by checking
the value of uattr before using it.

Fixes: ebb6796bd397 ("IB/uverbs: Add read counters support")
Signed-off-by: Xiang Yang <xiangyang3@huawei.com>
Link: https://lore.kernel.org/r/20230804022525.1916766-1-xiangyang3@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix CQ and QP cache affinity

[ Upstream commit 9e03dbea2b0634b21a45946b4f8097e0dc86ebe1 ]

Currently, the affinity between QP cache and CQ cache is not
considered when assigning QPN, it will affect the message rate of HW.

Allocate QPN from QP cache with better CQ affinity to get better
performance.

Fixes: 71586dd20010 ("RDMA/hns: Create QP with selected QPN for bank load balance")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20230804012711.808069-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix inaccurate error label name in init instance

[ Upstream commit c9c0bd3c177d93d80968f720304087ba83fe8f74 ]

This patch fixes inaccurate error label name in init instance.

Fixes: 70f92521584f ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20230804012711.808069-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix incorrect post-send with direct wqe of wr-list

[ Upstream commit 706efac4477cdb8be857f6322457de524acc02ff ]

Currently, direct wqe is not supported for wr-list. RoCE driver excludes
direct wqe for wr-list by judging whether the number of wr is 1.

For a wr-list where the second wr is a length-error atomic wr, the
post-send driver handles the first wr and adds 1 to the wr number counter
firstly. While handling the second wr, the driver finds out a length error
and terminates the wr handle process, remaining the counter at 1. This
causes the driver mistakenly judges there is only 1 wr and thus enters
the direct wqe process, carrying the current length-error atomic wqe.

This patch fixes the error by adding a judgement whether the current wr
is a bad wr. If so, use the normal doorbell process but not direct wqe
despite the wr number is 1.

Fixes: 01584a5edcc4 ("RDMA/hns: Add support of direct wqe")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20230804012711.808069-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix port active speed

[ Upstream commit df1bcf90a66a10967a3a43510b42cb3566208011 ]

HW supports a variety of different speed, but the current speed
is fixed.

The real speed should be querried from ethernet.

Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20230804012711.808069-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/sprd: Add missing force_aperture

[ Upstream commit d48a51286c698f7fe8efc688f23a532f4fe9a904 ]

force_aperture was intended to false only by GART drivers that have an
identity translation outside the aperture. This does not describe sprd, so
add the missing 'force_aperture = true'.

Fixes: b23e4fc4e3fa ("iommu: add Unisoc IOMMU basic driver")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/mediatek: Fix two IOMMU share pagetable issue

[ Upstream commit cf69ef46dbd980a0b1c956d668e066a73e0acd0f ]

Prepare for mt8188 to fix a two IOMMU HWs share pagetable issue.

We have two MM IOMMU HWs in mt8188, one is VPP-IOMMU, the other is
VDO-IOMMU. The 2 MM IOMMU HWs share pagetable don't work in this case:
 a) VPP-IOMMU probe firstly.
 b) VDO-IOMMU probe.
 c) The master for VDO-IOMMU probe (means frstdata is vpp-iommu).
 d) The master in another domain probe. No matter it is vdo or vpp.
Then it still create a new pagetable in step d). The problem is
"frstdata->bank[0]->m4u_dom" was not initialized. Then when d) enter, it
still create a new one.

In this patch, we create a new variable "share_dom" for this share
pgtable case, it should be helpful for readable. and put all the share
pgtable logic in the mtk_iommu_domain_finalise.

In mt8195, the master of VPP-IOMMU probes before than VDO-IOMMU
from its dtsi node sequence, we don't see this issue in it. Prepare for
mt8188.

Fixes: 645b87c190c9 ("iommu/mediatek: Fix 2 HW sharing pgtable issue")
Signed-off-by: Chengci.Xu <chengci.xu@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230602090227.7264-3-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/mediatek: Remove unused "mapping" member from mtk_iommu_data

[ Upstream commit 9ff894edd542618dad2fef538f8272c620a501db ]

Just remove a unused variable that only is for mtk_iommu_v1.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20221018024258.19073-7-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Stable-dep-of: cf69ef46dbd9 ("iommu/mediatek: Fix two IOMMU share pagetable issue")
Signed-off-by: Sasha Levin <sashal@kernel.org>

extcon: cht_wc: add POWER_SUPPLY dependency

[ Upstream commit d20a3a8a32e3fa564ff25da860c5fc1a97642dfe ]

The driver fails to link when CONFIG_POWER_SUPPLY is disabled:

x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_psy_get_prop':
extcon-intel-cht-wc.c:(.text+0x15ccda7): undefined reference to `power_supply_get_drvdata'
x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_pwrsrc_event':
extcon-intel-cht-wc.c:(.text+0x15cd3e9): undefined reference to `power_supply_changed'
x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_probe':
extcon-intel-cht-wc.c:(.text+0x15cd596): undefined reference to `devm_power_supply_register'

It should be possible to change the driver to not require this at
compile time and still provide other functions, but adding a hard
Kconfig dependency does not seem to have any practical downsides
and is simpler since the option is normally enabled anyway.

Fixes: 66e31186cd2aa ("extcon: intel-cht-wc: Add support for registering a power_supply class-device")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kernfs: add stub helper for kernfs_generic_poll()

[ Upstream commit 79038a99445f69c5d28494dd4f8c6f0509f65b2e ]

In some randconfig builds, kernfs ends up being disabled, so there is no prototype
for kernfs_generic_poll()

In file included from kernel/sched/build_utility.c:97:
kernel/sched/psi.c:1479:3: error: implicit declaration of function 'kernfs_generic_poll' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
                kernfs_generic_poll(t->of, wait);
                ^

Add a stub helper for it, as we have it for other kernfs functions.

Fixes: aff037078ecae ("sched/psi: use kernfs polling functions for PSI trigger polling")
Fixes: 147e1a97c4a0b ("fs: kernfs: add poll file operation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/r/20230724121823.1357562-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

driver core: Call dma_cleanup() on the test_remove path

[ Upstream commit f429378a9bf84d79a7e2cae05d2e3384cf7d68ba ]

When test_remove is enabled really_probe() does not properly pair
dma_configure() with dma_remove(), it will end up calling dma_configure()
twice. This corrupts the owner_cnt and renders the group unusable with
VFIO/etc.

Add the missing cleanup before going back to re_probe.

Fixes: 25f3bcfc54bc ("driver core: Add dma_cleanup callback in bus_type")
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Tested-by: Zenghui Yu <yuzenghui@huawei.com>
Closes: https://lore.kernel.org/all/6472f254-c3c4-8610-4a37-8d9dfdd54ce8@huawei.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v2-4deed94e283e+40948-really_probe_dma_cleanup_jgg@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

driver core: test_async: fix an error code

[ Upstream commit 22d2381bbd70a5853c2ee77522f4965139672db9 ]

The test_platform_device_register_node() function should return error
pointers instead of NULL.  That is what the callers are expecting.

Fixes: 57ea974fb871 ("driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/1e11ed19-e1f6-43d8-b352-474134b7c008@moroto.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dma-buf/sync_file: Fix docs syntax

[ Upstream commit 05d56d8079d510a2994039470f65bea85f0075ee ]

Fixes the warning:

  include/uapi/linux/sync_file.h:77: warning: Function parameter or member 'num_fences' not described in 'sync_file_info'

Fixes: 2d75c88fefb2 ("staging/android: refactor SYNC IOCTLs")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230724145000.125880-1-robdclark@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: qcm2290: Enable sync state

[ Upstream commit 4e048e9b7a160f7112069c0ec2947be15f3e8154 ]

Enable the generic .sync_state callback to ensure there are no
outstanding votes that would waste power.

Generally one would need a bunch of interface clocks to access the QoS
registers when trying to go over all possible nodes during sync_state,
but QCM2290 surprisingly does not seem to require any such handling.

Fixes: 1a14b1ac3935 ("interconnect: qcom: Add QCM2290 driver support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230720-topic-qcm2290_icc-v2-2-a2ceb9d3e713@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: tmc: Explicit type conversions to prevent integer overflow

[ Upstream commit fd380097cdb305582b7a1f9476391330299d2c59 ]

Perf cs_etm session executed unexpectedly when AUX buffer > 1G.

  perf record -C 0 -m ,2G -e cs_etm// -- <workload>
  [ perf record: Captured and wrote 2.615 MB perf.data ]

Perf only collect about 2M perf data rather than 2G. This is becasuse
the operation, "nr_pages << PAGE_SHIFT", in coresight tmc driver, will
overflow when nr_pages >= 0x80000(correspond to 1G AUX buffer). The
overflow cause buffer allocation to fail, and TMC driver will alloc
minimal buffer size(1M). You can just get about 2M perf data(1M AUX
buffer + perf data header) at least.

Explicit convert nr_pages to 64 bit to avoid overflow.

Fixes: 22f429f19c41 ("coresight: etm-perf: Add support for ETR backend")
Fixes: 99443ea19e8b ("coresight: Add generic TMC sg table framework")
Fixes: 2e499bbc1a92 ("coresight: tmc: implementing TMC-ETF AUX space API")
Signed-off-by: Ruidong Tian <tianruidong@linux.alibaba.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230804081514.120171-2-tianruidong@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/irdma: Replace one-element array with flexible-array member

[ Upstream commit 38313c6d2a02c28162e06753b01bd885caf9386d ]

One-element and zero-length arrays are deprecated. So, replace
one-element array in struct irdma_qvlist_info with flexible-array
member.

A patch for this was sent a while ago[1]. However, it seems that, at
the time, the changes were partially folded[2][3], and the actual
flexible-array transformation was omitted. This patch fixes that.

The only binary difference seen before/after changes is shown below:

|  drivers/infiniband/hw/irdma/hw.o
| @@ -868,7 +868,7 @@
| drivers/infiniband/hw/irdma/hw.c:484 (discriminator 2)
| size += struct_size(iw_qvlist, qv_info, rf->msix_count);
|      55b:      imul   $0x45c,%rdi,%rdi
|-     562:      add    $0x10,%rdi
|+     562:      add    $0x4,%rdi

which is, of course, expected as it reflects the mistake made
while folding the patch I've mentioned above.

Worth mentioning is the fact that with this change we save 12 bytes
of memory, as can be inferred from the diff snapshot above. Notice
that:

$ pahole -C rdma_qv_info idrivers/infiniband/hw/irdma/hw.o
struct irdma_qv_info {
u32                        v_idx;                /*     0     4 */
u16                        ceq_idx;              /*     4     2 */
u16                        aeq_idx;              /*     6     2 */
u8                         itr_idx;              /*     8     1 */

/* size: 12, cachelines: 1, members: 4 */
/* padding: 3 */
/* last cacheline: 12 bytes */
};

Link: https://lore.kernel.org/linux-hardening/20210525230038.GA175516@embeddedor/
Link: https://lore.kernel.org/linux-hardening/bf46b428deef4e9e89b0ea1704b1f0e5@intel.com/
Link: https://lore.kernel.org/linux-rdma/20210520143809.819-1-shiraz.saleem@intel.com/T/#u
Fixes: 44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZMpsQrZadBaJGkt4@work
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qedf: Do not touch __user pointer in qedf_dbg_fp_int_cmd_read() directly

[ Upstream commit 25dbc20deab5165f847b4eb42f376f725a986ee8 ]

The qedf_dbg_fp_int_cmd_read() function invokes sprintf() directly on a
__user pointer, which may crash the kernel.

Avoid doing that by vmalloc()'ating a buffer for scnprintf() and then
calling simple_read_from_buffer() which does a proper copy_to_user() call.

Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Link: https://lore.kernel.org/lkml/20230724120241.40495-1-oleksandr@redhat.com/
Link: https://lore.kernel.org/linux-scsi/20230726101236.11922-1-skashyap@marvell.com/
Cc: Saurav Kashyap <skashyap@marvell.com>
Cc: Rob Evers <revers@redhat.com>
Cc: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Jozef Bacik <jobacik@redhat.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: GR-QLogic-Storage-Upstream@marvell.com
Cc: linux-scsi@vger.kernel.org
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Oleksandr Natalenko <oleksandr@redhat.com>
Link: https://lore.kernel.org/r/20230731084034.37021-4-oleksandr@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qedf: Do not touch __user pointer in qedf_dbg_debug_cmd_read() directly

[ Upstream commit 31b5991a9a91ba97237ac9da509d78eec453ff72 ]

The qedf_dbg_debug_cmd_read() function invokes sprintf() directly on a
__user pointer, which may crash the kernel.

Avoid doing that by using a small on-stack buffer for scnprintf() and then
calling simple_read_from_buffer() which does a proper copy_to_user() call.

Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Link: https://lore.kernel.org/lkml/20230724120241.40495-1-oleksandr@redhat.com/
Link: https://lore.kernel.org/linux-scsi/20230726101236.11922-1-skashyap@marvell.com/
Cc: Saurav Kashyap <skashyap@marvell.com>
Cc: Rob Evers <revers@redhat.com>
Cc: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Jozef Bacik <jobacik@redhat.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: GR-QLogic-Storage-Upstream@marvell.com
Cc: linux-scsi@vger.kernel.org
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Oleksandr Natalenko <oleksandr@redhat.com>
Link: https://lore.kernel.org/r/20230731084034.37021-3-oleksandr@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qedf: Do not touch __user pointer in qedf_dbg_stop_io_on_error_cmd_read() directly

[ Upstream commit 7d3d20dee4f648ec44e9717d5f647d594d184433 ]

The qedf_dbg_stop_io_on_error_cmd_read() function invokes sprintf()
directly on a __user pointer, which may crash the kernel.

Avoid doing that by using a small on-stack buffer for scnprintf() and then
calling simple_read_from_buffer() which does a proper copy_to_user() call.

Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Link: https://lore.kernel.org/lkml/20230724120241.40495-1-oleksandr@redhat.com/
Link: https://lore.kernel.org/linux-scsi/20230726101236.11922-1-skashyap@marvell.com/
Cc: Saurav Kashyap <skashyap@marvell.com>
Cc: Rob Evers <revers@redhat.com>
Cc: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Jozef Bacik <jobacik@redhat.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: GR-QLogic-Storage-Upstream@marvell.com
Cc: linux-scsi@vger.kernel.org
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Oleksandr Natalenko <oleksandr@redhat.com>
Link: https://lore.kernel.org/r/20230731084034.37021-2-oleksandr@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Fix incomplete state save in rxe_requester

[ Upstream commit 5d122db2ff80cd2aed4dcd630befb56b51ddf947 ]

If a send packet is dropped by the IP layer in rxe_requester()
the call to rxe_xmit_packet() can fail with err == -EAGAIN.
To recover, the state of the wqe is restored to the state before
the packet was sent so it can be resent. However, the routines
that save and restore the state miss a significnt part of the
variable state in the wqe, the dma struct which is used to process
through the sge table. And, the state is not saved before the packet
is built which modifies the dma struct.

Under heavy stress testing with many QPs on a fast node sending
large messages to a slow node dropped packets are observed and
the resent packets are corrupted because the dma struct was not
restored. This patch fixes this behavior and allows the test cases
to succeed.

Fixes: 3050b9985024 ("IB/rxe: Fix race condition between requester and completer")
Link: https://lore.kernel.org/r/20230721200748.4604-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Split rxe_run_task() into two subroutines

[ Upstream commit dccb23f6c312e4480fe32ccbc2afac1a5cac7e5e ]

Split rxe_run_task(task, sched) into rxe_run_task(task) and
rxe_sched_task(task).

Link: https://lore.kernel.org/r/20221021200118.2163-5-rpearsonhpe@gmail.com
Signed-off-by: Ian Ziemba <ian.ziemba@hpe.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stable-dep-of: 5d122db2ff80 ("RDMA/rxe: Fix incomplete state save in rxe_requester")
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/APM: drop the duplicate APM_MINOR_DEV macro

[ Upstream commit 4ba2909638a29630a346d6c4907a3105409bee7d ]

This source file already includes <linux/miscdevice.h>, which contains
the same macro. It doesn't need to be defined here again.

Fixes: 874bcd00f520 ("apm-emulation: move APM_MINOR_DEV to include/linux/miscdevice.h")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: x86@kernel.org
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20230728011120.759-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: sprd: Fix DMA buffer leak issue

[ Upstream commit cd119fdc3ee1450fbf7f78862b5de44c42b6e47f ]

Release DMA buffer when _probe() returns failure to avoid memory leak.

Fixes: f4487db58eb7 ("serial: sprd: Add DMA mode support")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230725064053.235448-2-chunyan.zhang@unisoc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: sprd: Assign sprd_port after initialized to avoid wrong access

[ Upstream commit f9608f1887568b728839d006024585ab02ef29e5 ]

The global pointer 'sprd_port' may not zero when sprd_probe returns
failure, that is a risk for sprd_port to be accessed afterward, and
may lead to unexpected errors.

For example:

There are two UART ports, UART1 is used for console and configured in
kernel command line, i.e. "console=";

The UART1 probe failed and the memory allocated to sprd_port[1] was
released, but sprd_port[1] was not set to NULL;

In UART2 probe, the same virtual address was allocated to sprd_port[2],
and UART2 probe process finally will go into sprd_console_setup() to
register UART1 as console since it is configured as preferred console
(filled to console_cmdline[]), but the console parameters (sprd_port[1])
belong to UART2.

So move the sprd_port[] assignment to where the port already initialized
can avoid the above issue.

Fixes: b7396a38fb28 ("tty/serial: Add Spreadtrum sc9836-uart driver support")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20230725064053.235448-1-chunyan.zhang@unisoc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: accel: adxl313: Fix adxl313_i2c_id[] table

[ Upstream commit f636554c4cd1c644109cc525900a056495b86cc9 ]

The .driver_data in adxl313_i2c_id[] for adxl312 and adxl314 is
wrong. Fix this issue by adding corresponding adxl31x_chip_info
data.

Reported-by: Jonathan Cameron <jic23@kernel.org>
Closes: https://lore.kernel.org/all/20230722172832.04ad7738@jic23-huawei
Fixes: a7a1c60bc4c9 ("drivers: iio: accel: adxl312 and adxl314 support")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230725171624.331283-2-biju.das.jz@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla4xxx: Add length check when parsing nlattrs

[ Upstream commit 47cd3770e31df942e2bb925a9a855c79ed0662eb ]

There are three places that qla4xxx parses nlattrs:

 - qla4xxx_set_chap_entry()

 - qla4xxx_iface_set_param()

 - qla4xxx_sysfs_ddb_set_param()

and each of them directly converts the nlattr to specific pointer of
structure without length checking. This could be dangerous as those
attributes are not validated and a malformed nlattr (e.g., length 0) could
result in an OOB read that leaks heap dirty data.

Add the nla_len check before accessing the nlattr data and return EINVAL if
the length check fails.

Fixes: 26ffd7b45fe9 ("[SCSI] qla4xxx: Add support to set CHAP entries")
Fixes: 1e9e2be3ee03 ("[SCSI] qla4xxx: Add flash node mgmt support")
Fixes: 00c31889f751 ("[SCSI] qla4xxx: fix data alignment and use nl helpers")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20230723080053.3714534-1-linma@zju.edu.cn
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: be2iscsi: Add length check when parsing nlattrs

[ Upstream commit ee0268f230f66cb472df3424f380ea668da2749a ]

beiscsi_iface_set_param() parses nlattr with nla_for_each_attr and assumes
every attributes can be viewed as struct iscsi_iface_param_info.

This is not true because there is no any nla_policy to validate the
attributes passed from the upper function iscsi_set_iface_params().

Add the nla_len check before accessing the nlattr data and return EINVAL if
the length check fails.

Fixes: 0e43895ec1f4 ("[SCSI] be2iscsi: adding functionality to change network settings using iscsiadm")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20230723075938.3713864-1-linma@zju.edu.cn
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: Add strlen() check in iscsi_if_set{_host}_param()

[ Upstream commit ce51c817008450ef4188471db31639d42d37a5e1 ]

The functions iscsi_if_set_param() and iscsi_if_set_host_param() convert an
nlattr payload to type char* and then call C string handling functions like
sscanf and kstrdup:

  char *data = (char*)ev + sizeof(*ev);
  ...
  sscanf(data, "%d", &value);

However, since the nlattr is provided by the user-space program and the
nlmsg skb is allocated with GFP_KERNEL instead of GFP_ZERO flag (see
netlink_alloc_large_skb() in netlink_sendmsg()), dirty data on the heap can
lead to an OOB access for those string handling functions.

By investigating how the bug is introduced, we find it is really
interesting as the old version parsing code starting from commit
fd7255f51a13 ("[SCSI] iscsi: add sysfs attrs for uspace sync up") treated
the nlattr as integer bytes instead of string and had length check in
iscsi_copy_param():

  if (ev->u.set_param.len != sizeof(uint32_t))
    BUG();

But, since the commit a54a52caad4b ("[SCSI] iscsi: fixup set/get param
functions"), the code treated the nlattr as C string while forgetting to
add any strlen checks(), opening the possibility of an OOB access.

Fix the potential OOB by adding the strlen() check before accessing the
buf. If the data passes this check, all low-level set_param handlers can
safely treat this buf as legal C string.

Fixes: fd7255f51a13 ("[SCSI] iscsi: add sysfs attrs for uspace sync up")
Fixes: 1d9bf13a9cf9 ("[SCSI] iscsi class: add iscsi host set param event")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20230723075820.3713119-1-linma@zju.edu.cn
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: Add length check for nlattr payload

[ Upstream commit 971dfcb74a800047952f5288512b9c7ddedb050a ]

The current NETLINK_ISCSI netlink parsing loop checks every nlmsg to make
sure the length is bigger than sizeof(struct iscsi_uevent) and then calls
iscsi_if_recv_msg().

  nlh = nlmsg_hdr(skb);
  if (nlh->nlmsg_len < sizeof(*nlh) + sizeof(*ev) ||
    skb->len < nlh->nlmsg_len) {
    break;
  }
  ...
  err = iscsi_if_recv_msg(skb, nlh, &group);

Hence, in iscsi_if_recv_msg() the nlmsg_data can be safely converted to
iscsi_uevent as the length is already checked.

However, in other cases the length of nlattr payload is not checked before
the payload is converted to other data structures. One example is
iscsi_set_path() which converts the payload to type iscsi_path without any
checks:

  params = (struct iscsi_path *)((char *)ev + sizeof(*ev));

Whereas iscsi_if_transport_conn() correctly checks the pdu_len:

  pdu_len = nlh->nlmsg_len - sizeof(*nlh) - sizeof(*ev);
  if ((ev->u.send_pdu.hdr_size > pdu_len) ..
    err = -EINVAL;

To sum up, some code paths called in iscsi_if_recv_msg() do not check the
length of the data (see below picture) and directly convert the data to
another data structure. This could result in an out-of-bound reads and heap
dirty data leakage.

             _________  nlmsg_len(nlh) _______________
            /                                         \
+----------+--------------+---------------------------+
| nlmsghdr | iscsi_uevent |          data              |
+----------+--------------+---------------------------+
                          \                          /
                         iscsi_uevent->u.set_param.len

Fix the issue by adding the length check before accessing it. To clean up
the code, an additional parameter named rlen is added. The rlen is
calculated at the beginning of iscsi_if_recv_msg() which avoids duplicated
calculation.

Fixes: ac20c7bf070d ("[SCSI] iscsi_transport: Added Ping support")
Fixes: 43514774ff40 ("[SCSI] iscsi class: Add new NETLINK_ISCSI messages for cnic/bnx2i driver.")
Fixes: 1d9bf13a9cf9 ("[SCSI] iscsi class: add iscsi host set param event")
Fixes: 01cb225dad8d ("[SCSI] iscsi: add target discvery event to transport class")
Fixes: 264faaaa1254 ("[SCSI] iscsi: add transport end point callbacks")
Fixes: fd7255f51a13 ("[SCSI] iscsi: add sysfs attrs for uspace sync up")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20230725024529.428311-1-linma@zju.edu.cn
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: Rename iscsi_set_param() to iscsi_if_set_param()

[ Upstream commit 0c26a2d7c98039e913e63f9250fde738a3f88a60 ]

There are two iscsi_set_param() functions defined in libiscsi.c and
scsi_transport_iscsi.c respectively which is confusing.

Rename the one in scsi_transport_iscsi.c to iscsi_if_set_param().

Signed-off-by: Wenchao Hao <haowenchao@huawei.com>
Link: https://lore.kernel.org/r/20221122181105.4123935-1-haowenchao@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 971dfcb74a80 ("scsi: iscsi: Add length check for nlattr payload")
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: RDMA/srp: Fix residual handling

[ Upstream commit 89e637c19b2441aabc8dbf22a8745b932fd6996e ]

Although the code for residual handling in the SRP initiator follows the
SCSI documentation, that documentation has never been correct. Because
scsi_finish_command() starts from the data buffer length and subtracts the
residual, scsi_set_resid() must not be called if a residual overflow
occurs. Hence remove the scsi_set_resid() calls from the SRP initiator if a
residual overflow occurrs.

Cc: Leon Romanovsky <leon@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Fixes: 9237f04e12cc ("scsi: core: Fix scsi_get/set_resid() interface")
Fixes: e714531a349f ("IB/srp: Fix residual handling")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230724200843.3376570-3-bvanassche@acm.org
Acked-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: phy: mxs: fix getting wrong state with mxs_phy_is_otg_host()

[ Upstream commit 5eda42aebb7668b4dcff025cd3ccb0d3d7c53da6 ]

The function mxs_phy_is_otg_host() will return true if OTG_ID_VALUE is
0 at USBPHY_CTRL register. However, OTG_ID_VALUE will not reflect the real
state if the ID pin is float, such as Host-only or Type-C cases. The value
of OTG_ID_VALUE is always 1 which means device mode.
This patch will fix the issue by judging the current mode based on
last_event. The controller will update last_event in time.

Fixes: 7b09e67639d6 ("usb: phy: mxs: refine mxs_phy_disconnect_line")
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20230627110353.1879477-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mediatek: vcodec: fix resource leaks in vdec_msg_queue_init()

[ Upstream commit cf10b0bb503c974ba049d6f888b21178be20a962 ]

If we encounter any error in the vdec_msg_queue_init() then we need
to set "msg_queue->wdma_addr.size = 0;".  Normally, this is done
inside the vdec_msg_queue_deinit() function.  However, if the
first call to allocate &msg_queue->wdma_addr fails, then the
vdec_msg_queue_deinit() function is a no-op.  For that situation, just
set the size to zero explicitly and return.

There were two other error paths which did not clean up before returning.
Change those error paths to goto mem_alloc_err.

Fixes: b199fe46f35c ("media: mtk-vcodec: Add msg queue feature for lat and core architecture")
Fixes: 2f5d0aef37c6 ("media: mediatek: vcodec: support stateless AV1 decoder")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mediatek: vcodec: fix potential double free

[ Upstream commit be40f524b6edac4fb9a98ef79620fd9b9497a998 ]

The "lat_buf->private_data" needs to be set to NULL to prevent a
double free.  How this would happen is if vdec_msg_queue_init() failed
twice in a row and on the second time it failed earlier than on the
first time.

The vdec_msg_queue_init() function has a loop which does:
for (i = 0; i < NUM_BUFFER_COUNT; i++) {

Each iteration initializes one element in the msg_queue->lat_buf[] array
and then the clean up function vdec_msg_queue_deinit() frees each
element of the msg_queue->lat_buf[] array.  This clean up code relies
on the assumption that every element is either initialized or zeroed.
Leaving a freed pointer which is non-zero breaks the assumption.

Fixes: b199fe46f35c ("media: mtk-vcodec: Add msg queue feature for lat and core architecture")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mediatek: vcodec: Return NULL if no vdec_fb is found

[ Upstream commit dfa2d6e07432270330ae191f50a0e70636a4cd2b ]

"fb_use_list" is used to store used or referenced frame buffers for
vp9 stateful decoder. "NULL" should be returned when getting target
frame buffer failed from "fb_use_list", not a random unexpected one.

Fixes: f77e89854b3e ("[media] vcodec: mediatek: Add Mediatek VP9 Video Decoder Driver")
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: ensure the bitops don't cross boundaries

[ Upstream commit 5bd28eae48589694ff4e5badb03bf75dae695b3f ]

the supported_instance_count determine the instance index range,
it shouldn't exceed the bits number of instance_mask,
otherwise the bitops of instance_mask may cross boundaries

Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: fix UNUSED_VALUE issue reported by coverity

[ Upstream commit cf6a06354989c41b536be8e094561ee16223cf1f ]

assign value '-EINVAL' to ret, but the stored value is overwritten
before it can be used

Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: fix UNINIT issues reported by coverity

[ Upstream commit c224d0497a31ea2d173e1ea16af308945bff9037 ]

using uninitialized value may introduce risk

Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: fix REVERSE_INULL issues reported by coverity

[ Upstream commit 79d3bafaecc13bccab1ebbd28a15e669c5a4cdaf ]

null-checking of a pointor is suggested before dereferencing it

Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: fix CHECKED_RETURN issues reported by coverity

[ Upstream commit b237b058adbc7825da9c8f358f1ff3f0467d623a ]

calling "vpu_cmd_send/vpu_get_buffer_state/vpu_session_alloc_fs"
without checking return value

Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: rkvdec: increase max supported height for H.264

[ Upstream commit f000e6ca2d60fefd02a180a57df2c4162fa0c1b7 ]

After testing it is possible for the hardware to decode H264
bistream with a height up to 2560.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Fixes: cd33c830448ba ("media: rkvdec: Add the rkvdec driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mtk-jpeg: Fix use after free bug due to uncanceled work

[ Upstream commit c677d7ae83141d390d1253abebafa49c962afb52 ]

In mtk_jpeg_probe, &jpeg->job_timeout_work is bound with
mtk_jpeg_job_timeout_work. Then mtk_jpeg_dec_device_run
and mtk_jpeg_enc_device_run may be called to start the
work.
If we remove the module which will call mtk_jpeg_remove
to make cleanup, there may be a unfinished work. The
possible sequence is as follows, which will cause a
typical UAF bug.

Fix it by canceling the work before cleanup in the mtk_jpeg_remove

CPU0                  CPU1

                    |mtk_jpeg_job_timeout_work
mtk_jpeg_remove     |
  v4l2_m2m_release  |
    kfree(m2m_dev); |
                    |
                    | v4l2_m2m_get_curr_priv
                    |   m2m_dev->curr_ctx //use
Fixes: b2f0d2724ba4 ("[media] vcodec: mediatek: Add Mediatek JPEG Decoder Driver")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: add helper function to get id name

[ Upstream commit 12cd8b8ac02525977b2e860a877add10e8ce7468 ]

convert numbers into meaningful names,
then it can improve the log readability

Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: reinit vpu if reqbufs output 0

[ Upstream commit 73e3f09292a0492a3fe0f87a8170a74f12624c5e ]

according to v4l2 stateful decoder document 4.5.1.3. State Machine,
the state should change from seek to initialization
if call VIDIOC_REQBUFS(OUTPUT, 0).

so reinit the vpu decoder if reqbufs output 0

Fixes: 6de8d628df6e ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: extcon: maxim,max77843: restrict connector properties

[ Upstream commit fb2c3f72e819254d8c76de95917e5f9ff232586c ]

Do not allow any other properties in connector child, except what
usb-connector.yaml evaluates.

Fixes: 9729cad0278b ("dt-bindings: extcon: maxim,max77843: Add MAX77843 bindings")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: hisi_sas: Fix normally completed I/O analysed as failed

[ Upstream commit f5393a5602cacfda2014e0ff8220e5a7564e7cd1 ]

The PIO read command has no response frame and the struct iu[1024] won't be
filled. I/Os which are normally completed will be treated as failed in
sas_ata_task_done() when iu contains abnormal dirty data.

Consequently ending_fis should not be filled by iu when the response frame
hasn't been written to memory.

Fixes: d380f55503ed ("scsi: hisi_sas: Don't bother clearing status buffer IU in task prep")
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1689045300-44318-2-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: hisi_sas: Fix warnings detected by sparse

[ Upstream commit c0328cc595124579328462fc45d7a29a084cf357 ]

This patch fixes the following warning:

drivers/scsi/hisi_sas/hisi_sas_v3_hw.c:2168:43: sparse: sparse: restricted __le32 degrades to integer

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304161254.NztCVZIO-lkp@intel.com/
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1684118481-95908-4-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: f5393a5602ca ("scsi: hisi_sas: Fix normally completed I/O analysed as failed")
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/siw: Fabricate a GID on tun and loopback devices

[ Upstream commit bad5b6e34ffbaacc77ad28a0f482e33b3929e635 ]

LOOPBACK and NONE (tunnel) devices have all-zero MAC addresses.
Currently, siw_device_create() falls back to copying the IB device's
name in those cases, because an all-zero MAC address breaks the RDMA
core address resolution mechanism.

However, at the point when siw_device_create() constructs a GID, the
ib_device::name field is uninitialized, leaving the MAC address to
remain in an all-zero state.

Fabricate a random artificial GID for such devices, and ensure this
artificial GID is returned for all device query operations.

Link: https://lore.kernel.org/r/168960673260.3007.12378736853793339110.stgit@manet.1015granger.net
Reported-by: Tom Talpey <tom@talpey.com>
Fixes: a2d36b02c15d ("RDMA/siw: Enable siw on tunnel devices")
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cx24120: Add retval check for cx24120_message_send()

[ Upstream commit 96002c0ac824e1773d3f706b1f92e2a9f2988047 ]

If cx24120_message_send() returns error, we should keep local struct
unchanged.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 5afc9a25be8d ("[media] Add support for TechniSat Skystar S2")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-usb: m920x: Fix a potential memory leak in m920x_i2c_xfer()

[ Upstream commit ea9ef6c2e001c5dc94bee35ebd1c8a98621cf7b8 ]

'read' is freed when it is known to be NULL, but not when a read error
occurs.

Revert the logic to avoid a small leak, should a m920x_read() call fail.

Fixes: a2ab06d7c4d6 ("media: m920x: don't use stack on USB reads")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dib7000p: Fix potential division by zero

[ Upstream commit a1db7b2c5533fc67e2681eb5efc921a67bc7d5b8 ]

Variable loopdiv can be assigned 0, then it is used as a denominator,
without checking it for 0.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 713d54a8bd81 ("[media] DiB7090: add support for the dib7090 based")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: (bw != NULL) -> bw]
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: usb: smsusb: fix error handling code in smsusb_init_device

[ Upstream commit b9c7141f384097fa4fa67d2f72e5731d628aef7c ]

The previous commit 4b208f8b561f ("[media] siano: register media controller
earlier")moves siano_media_device_register before smscore_register_device,
and adds corresponding error handling code if smscore_register_device
fails. However, it misses the following error handling code of
smsusb_init_device.

Fix this by moving error handling code at the end of smsusb_init_device
and adding a goto statement in the following error handling parts.

Fixes: 4b208f8b561f ("[media] siano: register media controller earlier")
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu: rockchip: Fix directory table address encoding

[ Upstream commit 6df63b7ebdaf5fcd75dceedf6967d0761e56eca1 ]

The physical address to the directory table is currently encoded using
the following bit layout for IOMMU v2.

 31:12 - Address bit 31:0
 11: 4 - Address bit 39:32

This is also the bit layout used by the vendor kernel.

However, testing has shown that addresses to the directory/page tables
and memory pages are all encoded using the same bit layout.

IOMMU v1:
 31:12 - Address bit 31:0

IOMMU v2:
 31:12 - Address bit 31:0
 11: 8 - Address bit 35:32
  7: 4 - Address bit 39:36

Change to use the mk_dtentries ops to encode the directory table address
correctly. The value written to DTE_ADDR may include the valid bit set,
a bit that is ignored and DTE_ADDR reg read it back as 0.

This also update the bit layout comment for the page address and the
number of nybbles that are read back for DTE_ADDR comment.

These changes render the dte_addr_phys and dma_addr_dte ops unused and
is removed.

Fixes: 227014b33f62 ("iommu: rockchip: Add internal ops to handle variants")
Fixes: c55356c534aa ("iommu: rockchip: Add support for iommu v2")
Fixes: c987b65a574f ("iommu/rockchip: Fix physical address decoding")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20230617182540.3091374-2-jonas@kwiboo.se
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/amd/iommu_v2: Fix pasid_state refcount dec hit 0 warning on pasid unbind

[ Upstream commit 534103bcd52ca9c1fecbc70e717b4a538dc4ded8 ]

When unbinding pasid - a race condition exists vs outstanding page faults.

To prevent this, the pasid_state object contains a refcount.
    * set to 1 on pasid bind
    * incremented on each ppr notification start
    * decremented on each ppr notification done
    * decremented on pasid unbind

Since refcount_dec assumes that refcount will never reach 0:
  the current implementation causes the following to be invoked on
  pasid unbind:
        REFCOUNT_WARN("decrement hit 0; leaking memory")

Fix this issue by changing refcount_dec to refcount_dec_and_test
to explicitly handle refcount=1.

Fixes: 8bc54824da4e ("iommu/amd: Convert from atomic_t to refcount_t on pasid_state->count")
Signed-off-by: Daniel Marcovitch <dmarcovitch@nvidia.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20230609105146.7773-2-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: v4l2-core: Fix a potential resource leak in v4l2_fwnode_parse_link()

[ Upstream commit d7b13edd4cb4bfa335b6008ab867ac28582d3e5c ]

If fwnode_graph_get_remote_endpoint() fails, 'fwnode' is known to be NULL,
so fwnode_handle_put() is a no-op.

Release the reference taken from a previous fwnode_graph_get_port_parent()
call instead.

Also handle fwnode_graph_get_port_parent() failures.

In order to fix these issues, add an error handling path to the function
and the needed gotos.

Fixes: ca50c197bd96 ("[media] v4l: fwnode: Support generic fwnode for parsing standardised properties")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: i2c: tvp5150: check return value of devm_kasprintf()

[ Upstream commit 26ce7054d804be73935b9268d6e0ecf2fbbc8aef ]

devm_kasprintf() returns a pointer to dynamically allocated memory.
Pointer could be NULL in case allocation fails. Check pointer validity.
Identified with coccinelle (kmerr.cocci script).

Fixes: 0556f1d580d4 ("media: tvp5150: add input source selection of_graph support")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ad5820: Drop unsupported ad5823 from i2c_ and of_device_id tables

[ Upstream commit f126ff7e4024f6704e6ec0d4137037568708a3c7 ]

The supported ad5820 and ad5821 VCMs both use a single 16 bit register
which is written by sending 2 bytes with the data directly after sending
the i2c-client address.

The ad5823 OTOH has a more typical i2c / smbus device setup with multiple
8 bit registers where the first byte send after the i2c-client address is
the register address and the actual data only starts from the second byte
after the i2c-client address.

The ad5823 i2c_ and of_device_id-s was added at the same time as
the ad5821 ids with as rationale:

"""
Some camera modules also refer that AD5823 is a replacement of AD5820:
https://download.kamami.com/p564094-OV8865_DS.pdf
"""

The AD5823 may be an electrical and functional replacement of the AD5820,
but from a software pov it is not compatible at all and it is going to
need its own driver, drop its id from the ad5820 driver.

Fixes: b8bf73136bae ("media: ad5820: Add support for ad5821 and ad5823")
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ricardo Ribalda Delgado <ribalda@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov5640: fix low resolution image abnormal issue

[ Upstream commit a828002f38c5ee49d3f0c0e64c0f0caa1aec8dc2 ]

OV5640 will output abnormal image data when work at low resolution
(320x240, 176x144 and 160x120) after switching from high resolution,
such as 1080P, the time interval between high and low switching must
be less than 1000ms in order to OV5640 don't enter suspend state during
the time.

The reason is by 0x3824 value don't restore to initialize value when
do resolution switching. In high resolution setting array, 0x3824 is
set to 0x04, but low resolution setting array remove 0x3824 in commit
db15c1957a2d ("media: ov5640: Remove duplicated mode settings"). So
when do resolution switching from high to low, such as 1080P to 320x240,
and the time interval is less than auto suspend delay time which means
global initialize setting array will not be loaded, the output image
data are abnormal. Hence move 0x3824 from ov5640_init_setting[] table
to ov5640_setting_low_res[] table and also move 0x4407 0x460b, 0x460c
to avoid same issue.

Fixes: db15c1957a2d ("media: ov5640: Remove duplicated mode settings")
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/qedr: Remove a duplicate assignment in irdma_query_ah()

[ Upstream commit 65e02e840847158c7ee48ca8e6e91062b0f78662 ]

Delete a duplicate statement from this function implementation.

Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Minjie Du <duminjie@vivo.com>
Acked-by: Alok Prasad <palok@marvell.com>
Link: https://lore.kernel.org/r/20230706022704.1260-1-duminjie@vivo.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cgroup/cpuset: Inherit parent's load balance state in v2

[ Upstream commit c8c926200c55454101f072a4b16c9ff5b8c9e56f ]

Since commit f28e22441f35 ("cgroup/cpuset: Add a new isolated
cpus.partition type"), the CS_SCHED_LOAD_BALANCE bit of a v2 cpuset
can be on or off. The child cpusets of a partition root must have the
same setting as its parent or it may screw up the rebuilding of sched
domains. Fix this problem by making sure the a child v2 cpuset will
follows its parent cpuset load balance state unless the child cpuset
is a new partition root itself.

Fixes: f28e22441f35 ("cgroup/cpuset: Add a new isolated cpus.partition type")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pNFS: Fix assignment of xprtdata.cred

[ Upstream commit c4a123d2e8c4dc91d581ee7d05c0cd51a0273fab ]

The comma at the end of the line was leftover from an earlier refactor
of the _nfs4_pnfs_v3_ds_connect() function. This is technically valid C,
so the compilers didn't catch it, but if I'm understanding how it works
correctly it assigns the return value of rpc_clnt_add_xprtr() to
xprtdata.cred.

Reported-by: Olga Kornievskaia <kolga@netapp.com>
Fixes: a12f996d3413 ("NFSv4/pNFS: Use connections to a DS that are all of the same protocol family")
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.2: fix handling of COPY ERR_OFFLOAD_NO_REQ

[ Upstream commit 5690eed941ab7e33c3c3d6b850100cabf740f075 ]

If the client sent a synchronous copy and the server replied with
ERR_OFFLOAD_NO_REQ indicating that it wants an asynchronous
copy instead, the client should retry with asynchronous copy.

Fixes: 539f57b3e0fd ("NFS handle COPY ERR_OFFLOAD_NO_REQS")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: Guard against READDIR loop when entry names exceed MAXNAMELEN

[ Upstream commit f67b55b6588bcf9316a1e6e8d529100a5aa3ebe6 ]

Commit 64cfca85bacd asserts the only valid return values for
nfs2/3_decode_dirent should not include -ENAMETOOLONG, but for a server
that sends a filename3 which exceeds MAXNAMELEN in a READDIR response the
client's behavior will be to endlessly retry the operation.

We could map -ENAMETOOLONG into -EBADCOOKIE, but that would produce
truncated listings without any error.  The client should return an error
for this case to clearly assert that the server implementation must be
corrected.

Fixes: 64cfca85bacd ("NFS: Return valid errors from nfs2/3_decode_dirent()")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSD: da_addr_body field missing in some GETDEVICEINFO replies

[ Upstream commit 6372e2ee629894433fe6107d7048536a3280a284 ]

The XDR specification in RFC 8881 looks like this:

struct device_addr4 {
layouttype4 da_layout_type;
opaque da_addr_body<>;
};

struct GETDEVICEINFO4resok {
device_addr4 gdir_device_addr;
bitmap4 gdir_notification;
};

union GETDEVICEINFO4res switch (nfsstat4 gdir_status) {
case NFS4_OK:
GETDEVICEINFO4resok gdir_resok4;
case NFS4ERR_TOOSMALL:
count4 gdir_mincount;
default:
void;
};

Looking at nfsd4_encode_getdeviceinfo() ....

When the client provides a zero gd_maxcount, then the Linux NFS
server implementation encodes the da_layout_type field and then
skips the da_addr_body field completely, proceeding directly to
encode gdir_notification field.

There does not appear to be an option in the specification to skip
encoding da_addr_body. Moreover, Section 18.40.3 says:

> If the client wants to just update or turn off notifications, it
> MAY send a GETDEVICEINFO operation with gdia_maxcount set to zero.
> In that event, if the device ID is valid, the reply's da_addr_body
> field of the gdir_device_addr field will be of zero length.

Since the layout drivers are responsible for encoding the
da_addr_body field, put this fix inside the ->encode_getdeviceinfo
methods.

Fixes: 9cf514ccfacb ("nfsd: implement pNFS operations")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Tom Haynes <loghyr@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: lockd: avoid possible wrong NULL parameter

[ Upstream commit de8d38cf44bac43e83bad28357ba84784c412752 ]

clang's static analysis warning: fs/lockd/mon.c: line 293, column 2:
Null pointer passed as 2nd argument to memory copy function.

Assuming 'hostname' is NULL and calling 'nsm_create_handle()', this will
pass NULL as 2nd argument to memory copy function 'memcpy()'. So return
NULL if 'hostname' is invalid.

Fixes: 77a3ef33e2de ("NSM: More clean up of nsm_get_handle()")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

jfs: validate max amount of blocks before allocation.

[ Upstream commit 0225e10972fa809728b8d4c1bd2772b3ec3fdb57 ]

The lack of checking bmp->db_max_freebud in extBalloc() can lead to
shift out of bounds, so this patch prevents undefined behavior, because
bmp->db_max_freebud == -1 only if there is no free space.

Signed-off-by: Aleksei Filippov <halip0503@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+5f088f29593e6b4c8db8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?id=01abadbd6ae6a08b1f1987aa61554c6b3ac19ff2
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: fix unttached inode after power cut with orphan file feature enabled

[ Upstream commit 1524773425ae8113b0b782886366e68656b34e53 ]

Running generic/475(filesystem consistent tests after power cut) could
easily trigger unattached inode error while doing fsck:
  Unattached zero-length inode 39405.  Clear? no

  Unattached inode 39405
  Connect to /lost+found? no

Above inconsistence is caused by following process:
       P1                       P2
ext4_create
 inode = ext4_new_inode_start_handle  // itable records nlink=1
 ext4_add_nondir
   err = ext4_add_entry  // ENOSPC
    ext4_append
     ext4_bread
      ext4_getblk
       ext4_map_blocks // returns ENOSPC
   drop_nlink(inode) // won't be updated into disk inode
   ext4_orphan_add(handle, inode)
    ext4_orphan_file_add
 ext4_journal_stop(handle)
      jbd2_journal_commit_transaction // commit success
              >> power cut <<
ext4_fill_super
 ext4_load_and_init_journal   // itable records nlink=1
 ext4_orphan_cleanup
  ext4_process_orphan
   if (inode->i_nlink)        // true, inode won't be deleted

Then, allocated inode will be reserved on disk and corresponds to no
dentries, so e2fsck reports 'unattached inode' problem.

The problem won't happen if orphan file feature is disabled, because
ext4_orphan_add() will update disk inode in orphan list mode. There
are several places not updating disk inode while putting inode into
orphan area, such as ext4_add_nondir(), ext4_symlink() and whiteout
in ext4_rename(). Fix it by updating inode into disk in all error
branches of these places.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217605
Fixes: 02f310fcf47f ("ext4: Speedup ext4 orphan inode handling")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230628132011.650383-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/iommu: Fix notifiers being shared by PCI and VIO buses

[ Upstream commit c37b6908f7b2bd24dcaaf14a180e28c9132b9c58 ]

fail_iommu_setup() registers the fail_iommu_bus_notifier struct to both
PCI and VIO buses.  struct notifier_block is a linked list node, so this
causes any notifiers later registered to either bus type to also be
registered to the other since they share the same node.

This causes issues in (at least) the vgaarb code, which registers a
notifier for PCI buses.  pci_notify() ends up being called on a vio
device, converted with to_pci_dev() even though it's not a PCI device,
and finally makes a bad access in vga_arbiter_add_pci_device() as
discovered with KASAN:

 BUG: KASAN: slab-out-of-bounds in vga_arbiter_add_pci_device+0x60/0xe00
 Read of size 4 at addr c000000264c26fdc by task swapper/0/1

 Call Trace:
   dump_stack_lvl+0x1bc/0x2b8 (unreliable)
   print_report+0x3f4/0xc60
   kasan_report+0x244/0x698
   __asan_load4+0xe8/0x250
   vga_arbiter_add_pci_device+0x60/0xe00
   pci_notify+0x88/0x444
   notifier_call_chain+0x104/0x320
   blocking_notifier_call_chain+0xa0/0x140
   device_add+0xac8/0x1d30
   device_register+0x58/0x80
   vio_register_device_node+0x9ac/0xce0
   vio_bus_scan_register_devices+0xc4/0x13c
   __machine_initcall_pseries_vio_device_init+0x94/0xf0
   do_one_initcall+0x12c/0xaa8
   kernel_init_freeable+0xa48/0xba8
   kernel_init+0x64/0x400
   ret_from_kernel_thread+0x5c/0x64

Fix this by creating separate notifier_block structs for each bus type.

Fixes: d6b9a81b2a45 ("powerpc: IOMMU fault injection")
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
[mpe: Add #ifdef to fix CONFIG_IBMVIO=n build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230322035322.328709-1-ruscur@russell.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/mpc5xxx: Add missing fwnode_handle_put()

[ Upstream commit b9bbbf4979073d5536b7650decd37fcb901e6556 ]

In mpc5xxx_fwnode_get_bus_frequency(), we should add
fwnode_handle_put() when break out of the iteration
fwnode_for_each_parent_node() as it will automatically
increase and decrease the refcounter.

Fixes: de06fba62af6 ("powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230322030423.1855440-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n

[ Upstream commit 750bd41aeaeb1f0e0128aa4f8fcd6dd759713641 ]

With JUMP_LABEL=n, hcall_tracepoint_refcount's address is being tested
instead of its value. This results in the tracing slowpath always being
taken unnecessarily.

Fixes: 9a10ccb29c0a2 ("powerpc/pseries: move hcall_tracepoint_refcount out of .toc")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230509091600.70994-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfs/blocklayout: Use the passed in gfp flags

[ Upstream commit 08b45fcb2d4675f6182fe0edc0d8b1fe604051fa ]

This allocation should use the passed in GFP_ flags instead of
GFP_KERNEL.  One places where this matters is in filelayout_pg_init_write()
which uses GFP_NOFS as the allocation flags.

Fixes: 5c83746a0cf2 ("pnfs/blocklayout: in-kernel GETDEVICEINFO XDR parsing")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT

[ Upstream commit eac030b22ea12cdfcbb2e941c21c03964403c63f ]

lppaca_shared_proc() takes a pointer to the lppaca which is typically
accessed through get_lppaca().  With DEBUG_PREEMPT enabled, this leads
to checking if preemption is enabled, for example:

  BUG: using smp_processor_id() in preemptible [00000000] code: grep/10693
  caller is lparcfg_data+0x408/0x19a0
  CPU: 4 PID: 10693 Comm: grep Not tainted 6.5.0-rc3 #2
  Call Trace:
    dump_stack_lvl+0x154/0x200 (unreliable)
    check_preemption_disabled+0x214/0x220
    lparcfg_data+0x408/0x19a0
    ...

This isn't actually a problem however, as it does not matter which
lppaca is accessed, the shared proc state will be the same.
vcpudispatch_stats_procfs_init() already works around this by disabling
preemption, but the lparcfg code does not, erroring any time
/proc/powerpc/lparcfg is accessed with DEBUG_PREEMPT enabled.

Instead of disabling preemption on the caller side, rework
lppaca_shared_proc() to not take a pointer and instead directly access
the lppaca, bypassing any potential preemption checks.

Fixes: f13c13a00512 ("powerpc: Stop using non-architected shared_proc field in lppaca")
Signed-off-by: Russell Currey <ruscur@russell.cc>
[mpe: Rework to avoid needing a definition in paca.h and lppaca.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230823055317.751786-4-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: Don't include lppaca.h in paca.h

[ Upstream commit 1aa000667669fa855853decbb1c69e974d8ff716 ]

By adding a forward declaration for struct lppaca we can untangle paca.h
and lppaca.h. Also move get_lppaca() into lppaca.h for consistency.

Add includes of lppaca.h to some files that need it.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230823055317.751786-3-mpe@ellerman.id.au
Stable-dep-of: eac030b22ea1 ("powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT")
Signed-off-by: Sasha Levin <sashal@kernel.org>