Tom Rini [Sun, 10 Apr 2022 15:21:39 +0000 (11:21 -0400)]
Merge tag 'efi-2022-07-rc1' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request for efi-2022-07-rc1
Documentation:
* Describe how enable DM_SERIAL for a board
UEFI
* Preparatory patches for better integration of DM and UEFI
* Use sysreset after capsule updates instead of do_reset
* Allow to disable persisting non-volatile variables
Marek Vasut [Sun, 10 Apr 2022 04:46:52 +0000 (06:46 +0200)]
Revert "env: Load env when ENV_IS_NOWHERE is only location selected"
This reverts commit
8d61237edbf6314a701cf78da2c5893a73ff5438.
This commit broke environment on literally every board I have access
to, with this revert in place, environment works as it should again.
The problem I observe with this patch is that saved environment in
either SPI NOR or eMMC is never used, the system always falls back
to default environment. The 'saveenv' command does succeed, but then
after reset, the default env is again used.
Furthermore, the commit introduced duplicate code in env_init(), this:
"
if (!prio) {
gd->env_addr = (ulong)&default_environment[0];
gd->env_valid = ENV_INVALID;
return 0;
}
if (ret == -ENOENT) {
gd->env_addr = (ulong)&default_environment[0];
gd->env_valid = ENV_INVALID;
return 0;
}
"
Furthermore, the commit is missing DCO SoB line.
Also note that upstream does not support UltraZed EG board, so
this might have been a patch pulled from downstream which did
depend on some other downstream behavior.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Felix.Vietmeyer@jila.colorado.edu <felix.vietmeyer@jila.colorado.edu>
Cc: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 10 Apr 2022 15:19:14 +0000 (11:19 -0400)]
Merge branch '2022-04-08-gpio-updates'
- Add PCA957X GPIO support, enable GPIO hogging in SPL, add
gpio_request_by_line_name() for later use and add some pytests for
'gpio'
AKASHI Takahiro [Tue, 8 Mar 2022 11:36:46 +0000 (20:36 +0900)]
dm: add tag support
With dm-tag feature, any U-Boot subsystem is allowed to associate
arbitrary number of data with a particular udevice. This can been
see as expanding "struct udevice" without modifying the definition.
As a first user, UEFI subsystem makes use of tags to associate
an efi_disk object with a block device.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
AKASHI Takahiro [Tue, 8 Mar 2022 11:36:45 +0000 (20:36 +0900)]
virtio: call device_probe() in scanning
virtio_init() enumerates all the peripherals that are to be materialised
with udevices(UCLASS_VIRIO) and creates particular device instances
(UCLASS_BlK or whatever else) as children.
On the other hand, device_probe() won't be invoked against those resultant
udevices unlike other ordinary device drivers do in the driver model.
This is particularly inconvenient when we want to add "event notification"
callback so that we will be able to automatically create all efi_disk
objects in a later patch.
With this patch applied, "virtio scan" will work in a similar way
to "scsi rescan", "usb start" or others in term of 'probe' semantics.
I didn't add this change to virtio_init() itself because this function
may be called in board_init_r() (indirectly in board_late_init())
before UEFI subsustem is initialized.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
AKASHI Takahiro [Tue, 8 Mar 2022 11:36:44 +0000 (20:36 +0900)]
block: ide: call device_probe() after scanning
Every time an ide bus/port is scanned and a new device is detected,
we want to call device_probe() as it will give us a chance to run
additional post-processings for some purposes.
In particular, support for creating partitions on a device will be added.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
AKASHI Takahiro [Tue, 8 Mar 2022 11:36:43 +0000 (20:36 +0900)]
sata: call device_probe() after scanning
Every time a sata bus/port is scanned and a new device is detected,
we want to call device_probe() as it will give us a chance to run
additional post-processings for some purposes.
In particular, support for creating partitions on a device will be added.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
AKASHI Takahiro [Tue, 8 Mar 2022 11:36:42 +0000 (20:36 +0900)]
nvme: call device_probe() after scanning
Every time a nvme bus/port is scanned and a new device is detected,
we want to call device_probe() as it will give us a chance to run
additional post-processings for some purposes.
In particular, support for creating partitions on a device will be added.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
AKASHI Takahiro [Tue, 8 Mar 2022 11:36:41 +0000 (20:36 +0900)]
mmc: call device_probe() after scanning
Every time a mmc bus/port is scanned and a new device is detected,
we want to call device_probe() as it will give us a chance to run
additional post-processings for some purposes.
In particular, support for creating partitions on a device will be added.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
AKASHI Takahiro [Tue, 8 Mar 2022 11:36:40 +0000 (20:36 +0900)]
usb: storage: call device_probe() after scanning
Every time a usb bus/port is scanned and a new device is detected,
we want to call device_probe() as it will give us a chance to run
additional post-processings for some purposes.
In particular, support for creating partitions on a device will be added.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
AKASHI Takahiro [Tue, 8 Mar 2022 11:36:39 +0000 (20:36 +0900)]
scsi: call device_probe() after scanning
Every time a scsi bus/port is scanned and a new block device is detected,
we want to call device_probe() as it will give us a chance to run
additional post-processings for some purposes.
In particular, support for creating partitions on a device will be added.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Masami Hiramatsu [Mon, 21 Mar 2022 13:37:56 +0000 (22:37 +0900)]
efi_loader: Use sysreset instead of reset command
Use sysreset_walk_halt() directly from reset-after-capsule-on-disk
feature to reboot (cold reset) machine instead of using reset command
interface, since this is not a command.
Note that this will make CONFIG_EFI_CAPSULE_ON_DISK depending on
the CONFIG_SYSRESET.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Masami Hiramatsu [Mon, 21 Mar 2022 13:37:45 +0000 (22:37 +0900)]
efi_loader: Make efi_load_capsule_drivers() available even if EFI_CAPSULE_ON_DISK=n
Make efi_load_capsule_drivers() available even if EFI_CAPSULE_ON_DISK
is disabled because the caller (efi_init_obj_list()) expects it only
relays on EFI_HAVE_CAPSULE_SUPPORT.
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Masami Hiramatsu [Mon, 21 Mar 2022 13:37:35 +0000 (22:37 +0900)]
cmd: efidebug: Disable 'capsule disk-update' when CONFIG_EFI_CAPSULE_ON_DISK=n
Disable 'capsule disk-update' option for the efidebug command
when CONFIC_EFI_CAPSULE_ON_DISK is disabled, because this option
is available only when the EFI capsule update on disk is enabled.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tom Saeger [Tue, 22 Mar 2022 21:21:10 +0000 (15:21 -0600)]
efi_loader: optional persistence of variables
Since
be66b89da306 ("efi_loader: configuration of variables store")
the choice of EFI_VARIABLE_FILE_STORE or EFI_MM_COMM_TEE
is mutually-exclusive, however efi_var_to_file also allows
for "neither". Provide an additional Kconfig option.
Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Pali Rohár [Wed, 6 Apr 2022 09:35:46 +0000 (11:35 +0200)]
doc: distro: Update list of all support boot types
Add HOST, UBIFS.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Heinrich Schuchardt [Tue, 5 Apr 2022 14:14:27 +0000 (16:14 +0200)]
doc: debug UART for RISC-V QEMU virt machine
Provide settings for enabling the debug UART of the virt machine on
RISC-V QEMU.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Heinrich Schuchardt [Sat, 2 Apr 2022 05:16:56 +0000 (07:16 +0200)]
doc: correct bootefi.rst
* add link to booti man-page
* correct link description for efidebug command
* correct punctuation
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Simon Glass [Wed, 16 Mar 2022 03:03:20 +0000 (21:03 -0600)]
dm: Add docs to explain how to enable DM_SERIAL for a board
This is an attempt to cover the common cases found when enabling driver
model for serial on a new board.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Luca Ellero [Tue, 22 Mar 2022 14:38:36 +0000 (15:38 +0100)]
gpio: pca953x_gpio: add PCA957X support
Take as reference Linux kernel code:
drivers/gpio/gpio-pca953x.c
Signed-off-by: Luca Ellero <l.ellero@asem.it>
Reviewed-by: Simon Glass <sjg@chromium.org>
Eddie James [Mon, 7 Feb 2022 23:09:01 +0000 (17:09 -0600)]
gpio: Enable hogging support in SPL
Use the CONFIG macros to conditionally build the GPIO hogging support in
either the SPL or U-Boot, or both, depending on the configuration. Also
call the GPIO hog probe function in the common SPL board initialization
as an equivalent to adding it to the U-Boot init sequence functions.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Andrew Jeffery [Mon, 31 Jan 2022 03:24:05 +0000 (13:54 +1030)]
gpio: Add gpio_request_by_line_name()
Add support for the upstream gpio-line-names property already described
in the common GPIO binding document[1]. The ability to search for a line
name allows boards to lift the implementation of common GPIO behaviours
away from specific line indexes on a GPIO controller.
[1] https://github.com/devicetree-org/dt-schema/blob/
3c35bfee83c2e38e2ae7af5f83eb89ca94a521e8/dtschema/schemas/gpio/gpio.yaml#L17
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Adarsh Babu Kalepalli [Mon, 31 May 2021 10:53:51 +0000 (16:23 +0530)]
test/py:Update python tests for ‘gpio’ cmd
Generic Python Test cases are developed to verfiy 'gpio' command.
Signed-off-by: Adarsh Babu Kalepalli <opensource.kab@gmail.com>
Tom Rini [Fri, 8 Apr 2022 17:36:51 +0000 (13:36 -0400)]
configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 8 Apr 2022 17:33:14 +0000 (13:33 -0400)]
Merge branch '2022-04-08-Kconfig-updates-and-dead-code-removal'
- Migration of more symbols from board config.h files to defconfig
- Remove unused network drivers
Tom Rini [Thu, 31 Mar 2022 17:46:53 +0000 (13:46 -0400)]
arm: Remove unused ep93xx code
There are no platforms for this architecture anymore, remove unused
code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 31 Mar 2022 17:46:52 +0000 (13:46 -0400)]
net: Remove uli526x driver
This driver is not enabled by any board and not converted to DM_ETH.
Remove.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 31 Mar 2022 17:46:51 +0000 (13:46 -0400)]
net: Remove ns8382x driver
This driver is not enabled by any board and not converted to DM_ETH.
Remove.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 31 Mar 2022 17:46:50 +0000 (13:46 -0400)]
net: Remove natsemi driver
This driver is not enabled by any board and not converted to DM_ETH.
Remove.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 31 Mar 2022 17:46:49 +0000 (13:46 -0400)]
net: Remove lan91c96 driver
This driver is not enabled by any board and not converted to DM_ETH.
Remove.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 31 Mar 2022 17:46:48 +0000 (13:46 -0400)]
net: Remove ftmac110 driver
This driver is not enabled by any board and not converted to DM_ETH.
Remove.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 31 Mar 2022 17:46:47 +0000 (13:46 -0400)]
net: Remove dnet driver
This driver is not enabled by any board and not converted to DM_ETH.
Remove.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 31 Mar 2022 17:46:46 +0000 (13:46 -0400)]
net: Remove cs8900 driver
This driver is not enabled by any board and not converted to DM_ETH.
Remove.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 31 Mar 2022 17:46:45 +0000 (13:46 -0400)]
net: Remove ax88180 driver
This driver is not enabled by any board and not converted to DM_ETH.
Remove.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 31 Mar 2022 17:46:44 +0000 (13:46 -0400)]
net: Remove armada100_fec driver
This driver is not enabled by any board and not converted to DM_ETH.
Remove.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 30 Mar 2022 22:07:35 +0000 (18:07 -0400)]
arm: fsl-layerscape: Migrate more DP-DDR options to Kconfig
Based on current usage, migrate a number of DP-DDR related options to
Kconfig.
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 30 Mar 2022 22:07:34 +0000 (18:07 -0400)]
siemens-am33x-common: Drop CONFIG_DMA_COHERENT*
These values are not used in the code, remove them.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 30 Mar 2022 22:07:33 +0000 (18:07 -0400)]
m53menlo: Drop CONFIG_DISCOVER_PHY
This is not used in code, drop.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 30 Mar 2022 22:07:32 +0000 (18:07 -0400)]
Convert CONFIG_FSL_QIXIS et al to Kconfig
This converts the following to Kconfig:
CONFIG_FSL_QIXIS
CONFIG_QIXIS_I2C_ACCESS
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 30 Mar 2022 22:07:31 +0000 (18:07 -0400)]
Convert CONFIG_DIMM_SLOTS_PER_CTLR to Kconfig
This converts the following to Kconfig:
CONFIG_DIMM_SLOTS_PER_CTLR
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 30 Mar 2022 22:07:30 +0000 (18:07 -0400)]
galileo: Remove CONFIG_DESIGNWARE_ETH reference
This platform has CONFIG_ETH_DESIGNWARE set already, which is the
correct value for the driver in question. Remove this incorrect line.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 30 Mar 2022 22:07:29 +0000 (18:07 -0400)]
powerpc: mpc83xx: Migrate DEFAULT_IMMR to Kconfig
As no platforms override this value, set it for all mpc83xx platforms.
Cc: Mario Six <mario.six@gdsys.cc>
Cc: Wolfgang Denk <wd@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 30 Mar 2022 22:07:28 +0000 (18:07 -0400)]
nds32: Migrate CONFIG_DEBUG_LED to Kconfig
Move this value to the board Kconfig file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 30 Mar 2022 22:07:27 +0000 (18:07 -0400)]
ls1021atwr: Use DEBUG and not CONFIG_DEBUG
We use 'DEBUG' and not 'CONFIG_DEBUG' tree-wide for debug code that is
left in, and not wrapped by some other regular debugging type print
macro.
Cc: Alison Wang <alison.wang@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 30 Mar 2022 22:07:26 +0000 (18:07 -0400)]
microblaze: Migrate DCACHE/ICACHE to Kconfig
Move these two options to the arch Kconfig file.
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Tom Rini [Wed, 30 Mar 2022 22:07:25 +0000 (18:07 -0400)]
tegra: Drop CONFIG_CHROMEOS_EXTRA_ENV_SETTINGS
This is not currently set by any boards, so drop.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 30 Mar 2022 22:07:24 +0000 (18:07 -0400)]
controlcenterdc: Migrate CUSTOMER_BOARD_SUPPORT to Kconfig
This symbol is only possibly useful on some mvebu platforms, so move the
symbol there and select it for the only current user.
Cc: Mario Six <mario.six@gdsys.cc>
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tom Rini [Wed, 30 Mar 2022 22:07:23 +0000 (18:07 -0400)]
spi: cadence_qspi: Migrate CONFIG_CQSPI_REF_CLK to Kconfig
This is a little tricky since SoCFPGA has code to determine this as
runtime. Introduce a guard variable for platforms to select if they
have a static value to use. Then for ARCH_SOCFPGA, call
cm_get_qspi_controller_clk_hz() and otherwise continue the previous
behavior.
Cc: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 30 Mar 2022 22:07:22 +0000 (18:07 -0400)]
Convert CONFIG_SH_SCIF_CLK_FREQ to Kconfig
This converts the following to Kconfig:
CONFIG_SH_SCIF_CLK_FREQ
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 30 Mar 2022 22:07:21 +0000 (18:07 -0400)]
Convert CONFIG_CONS_SCIF0 et al to Kconfig
This converts the following to Kconfig:
CONFIG_CONS_SCIF0
CONFIG_CONS_SCIF1
CONFIG_CONS_SCIF2
CONFIG_CONS_SCIF4
CONFIG_CONS_SCIFA0
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 30 Mar 2022 22:07:20 +0000 (18:07 -0400)]
at91: Remove unused LED code
These LED files (and CONFIG values) are unused today, remove the code in
question.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 30 Mar 2022 22:07:19 +0000 (18:07 -0400)]
stm32f429-discovery: Migrate CONFIG_*_LED out of CONFIG namespace
These values are only used in one file, reference them more directly.
Cc: Kamil Lulko <kamil.lulko@gmail.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Tom Rini [Wed, 30 Mar 2022 22:07:18 +0000 (18:07 -0400)]
corvus: Migrate CONFIG_*_LED out of CONFIG namespace
This code is only used on the corvus platform, so migrate the LED on/off
code to this platform and remove it from the CONFIG namespace. In
theory, this should likely be moved to the modern GPIO LED driver as a
further cleanup.
Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Tom Rini [Wed, 30 Mar 2022 22:07:17 +0000 (18:07 -0400)]
MPC837XERDB: Stop using CONFIG_RAMDISKFILE
We don't really configure this, just set it directly in the environment
section.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 30 Mar 2022 22:07:16 +0000 (18:07 -0400)]
s5p_goni, smdkc100: Move some environment settings out of CONFIG
A number of CONFIG options are used on these platforms as part of the
default environment. Set some of these more directly and in other
cases, just reference them directly.
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 30 Mar 2022 22:07:15 +0000 (18:07 -0400)]
arm: integrator: Migrate platform-specific options and cleanup armcoremodule.h
This converts the following to Kconfig:
CONFIG_CM_INIT
CONFIG_CM_REMAP
CONFIG_CM_SPD_DETECT
CONFIG_CM_MULTIPLE_SSRAM
CONFIG_CM_TCRAM
We make the first three of these options be always enabled, as that
matches usage. We select the last two based on how they were defined in
armcoremodule.h. This also allows us to remove some unused code in
board/armltd/integrator/lowlevel_init.S
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 30 Mar 2022 22:07:14 +0000 (18:07 -0400)]
Convert CONFIG_CMDLINE_PS_SUPPORT to Kconfig
This converts the following to Kconfig:
CONFIG_CMDLINE_PS_SUPPORT
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 30 Mar 2022 22:07:13 +0000 (18:07 -0400)]
tegra: Migrate CI_UDC_HAS_HOSTPC to Kconfig
This option is only enabled for CI_UDC and !TEGRA20, so implement it as
such in Kconfig directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Tom Rini [Wed, 30 Mar 2022 22:07:12 +0000 (18:07 -0400)]
mvebu: Move BOOTROM_ERR_REG out of CONFIG namespace
This register is referenced in one location and does not seem
configurable, so remove it from CONFIG namespace.
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tom Rini [Wed, 30 Mar 2022 22:07:11 +0000 (18:07 -0400)]
Convert CONFIG_BOARD_SIZE_LIMIT to Kconfig
This converts the following to Kconfig:
CONFIG_BOARD_SIZE_LIMIT
To do this, introduce CONFIG_HAS_BOARD_SIZE_LIMIT.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 8 Apr 2022 12:27:50 +0000 (08:27 -0400)]
Merge branch '2022-04-08-env-updates'
- Assorted env tooling updates
- Bug fix around multiple possible env locations and ENV_IS_NOWHERE
- Add 'indirect' sub-command to env
- Allow for FAT env to have the location overridden by the board code.
Simon Glass [Sun, 13 Mar 2022 05:47:49 +0000 (22:47 -0700)]
env: Allow text-env tests to run with awk
At present the tests assume that gawk is being used. Adjust the tests so
that the names are inserted in alphabetical order, so that awk is happy.
Also use PROCINFO to make gawk output in alphabetical order. This is not
ideal, since it changes the env-car ordering from what the user provided,
but it may be acceptable.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Fixes: https://source.denx.de/u-boot/u-boot/-/issues/10
Simon Glass [Fri, 11 Mar 2022 23:22:39 +0000 (16:22 -0700)]
env: Drop the unncessary protocol mention in autoload
Drop this text at the end since it already mentions bootp and dhcp.
Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Simon Glass [Fri, 11 Mar 2022 23:22:38 +0000 (16:22 -0700)]
env: Move the doc comment to the code
This doesn't really make much sense in the documentation. Add a code
comment instead.
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
Christoph Niedermaier [Tue, 1 Mar 2022 08:38:51 +0000 (09:38 +0100)]
Makefile: Sort u-boot-initial-env output
This will sort the default environment file generated by
"make u-boot-initial-env", but won't sort the default
environment in the compiled u-boot binary. The file
u-boot-initial-env is considered to use for the userpace
environment access tools [1] in case of that the
environments is written the first time into its location.
This is done on the one hand for a better overview and
comparison of the generated environment file. On the other
hand it is to synchronize the output with the script
get_default_env.sh, which generated a sorted default
environment file. The sorting preserves the order of equal
variable names by sorting only the variable name, and
disable the last-resort comparison. After sorting,
unnoticed blank lines at the end move to the top. Avoid
that by removing it before sorting.
[1] https://github.com/sbabic/libubootenv
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Tested-by: Stefano Babic <sbabic@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Marek Behún <marek.behun@nic.cz>
To: u-boot@lists.denx.de
Reviewed-by: Simon Glass <sjg@chromium.org>
Christoph Niedermaier [Wed, 23 Feb 2022 09:33:36 +0000 (10:33 +0100)]
scripts/get_default_envs.sh: Remove blank lines
After sorting, unnoticed blank lines at the end move to the top.
Avoid this by removing it before sorting.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Cc: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
He Yong [Thu, 17 Feb 2022 16:07:25 +0000 (00:07 +0800)]
env: fat: Allow overriding interface, device and partition
For platform which can boot on different device, this allows
to override interface, device and partition from board code
Signed-off-by: He Yong <hyyoxhk@163.com>
Samuel Dionne-Riel [Mon, 20 Dec 2021 23:31:56 +0000 (18:31 -0500)]
cmd: env: Add `indirect` to indirectly set values
This allows an ergonomic-enough approximation of ${!variable} expansion.
This could be used the following way:
```
for target in ${boot_targets}; do
env indirect target_name target_name_${target}
# ...
done
```
Assuming `target_name_mmc0` and similar are set appropriately.
A default value can be optionally provided.
Note: this acts on environment variables, not hush variables.
Signed-off-by: Samuel Dionne-Riel <samuel@dionne-riel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: "Marek Behún" <marek.behun@nic.cz>
[trini: Don't enable by default]
Felix.Vietmeyer@jila.colorado.edu [Wed, 21 Apr 2021 02:04:26 +0000 (20:04 -0600)]
env: Load env when ENV_IS_NOWHERE is only location selected
This patch prevent u-boot from hanging on a UltraZed EG board (zynqmp).
Without the patch,
(drv = env_driver_lookup(ENVOP_INIT, prio))
evaluates to 0, causing prio = 0
Then, (!prio) is hit, returning -ENODEV causing a stall.
With the patch,
instead of returning -ENODEV and causing a stall, we
set gd->env_addr (is this really needed?)
and then
mark gd->env_valid = ENV_INVALID to use the default env.
Fabio Estevam [Sat, 26 Mar 2022 14:47:40 +0000 (11:47 -0300)]
imx8/ls10xx: Use a sane SYS_MALLOC_F_LEN default
When adding new features to imx8m boards, such as DM clock support,
the malloc area can be exhausted.
To avoid such issue, provide a reasonable default for the
SYS_MALLOC_F_LEN size.
Quoting Tom Rini:
"This seems to be an area where everyone is either:
- Kicking the value up a bit for themselves
- Having hard to figure out problems booting the platform because it's
too small a value until they see someone else picked a larger value.
So lets raise these a bit and get some acks, please."
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon, imx8mn-beacon
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Tom Rini [Thu, 7 Apr 2022 13:49:27 +0000 (09:49 -0400)]
Merge branch '2022-04-06-various-verified-boot-bugfixes'
To quote the author:
This series collects together various misc patches that were needed when
building mainline U-Boot against Chromium OS verified boot. Most of them
fix minor bugs.
Simon Glass [Mon, 28 Feb 2022 19:08:35 +0000 (12:08 -0700)]
dm: blk: Expand iteration and add tests
Add some functions which support iteration before probing. Also add tests
for the functions.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 28 Feb 2022 19:08:34 +0000 (12:08 -0700)]
dm: core: Tidy up comments in uclass headers
Improve some of the comments in these files, which don't follow the
correct style.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 28 Feb 2022 19:08:33 +0000 (12:08 -0700)]
dm: core: Add a required struct declaration
This file uses struct driver, so declare it at the top in case the
header-inclusion order is not as expected.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 28 Feb 2022 19:08:32 +0000 (12:08 -0700)]
stdint: Add a definition of UINT8_MAX
This is normally defined in stdint.h but is not used in U-Boot. When
libraries (such as Chromium OS vboot) are built against U-Boot they may
expect this value to be available. Add it to avoid build errors in this
case.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 28 Feb 2022 19:08:31 +0000 (12:08 -0700)]
Make ASYMMETRIC_KEY_TYPE depend on FIT_SIGNATURE
Add this dependency to avoid a build error if FIT_SIGNATURE is not
enabled.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 28 Feb 2022 19:08:30 +0000 (12:08 -0700)]
Add a default for TPL_TEXT_BASE
If this value is not provided it causes a hang in the build. Add a default
value to avoid this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 28 Feb 2022 19:08:29 +0000 (12:08 -0700)]
disk: Correct the conditions for SPL
These filesystems may have different settings for SPL and TPL. Use the
correct Makefile variable to handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 28 Feb 2022 19:08:28 +0000 (12:08 -0700)]
spi: Avoid checking console in SPL
When SPI flash is used in SPL there is no console, so ctrlc() cannot be
called. Add a condition to fix this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 28 Feb 2022 19:08:27 +0000 (12:08 -0700)]
cros_ec: Complete the comment for cros_ec_read_batt_charge()
Add the missing 'Return' information.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 28 Feb 2022 19:08:26 +0000 (12:08 -0700)]
cbfs: Add some more definititions
Add definitions for a payload or 'self', which is like an unpacked ELF
file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 28 Feb 2022 19:08:25 +0000 (12:08 -0700)]
lzma: Tidy up the function prototype
This should use a const pointer for the input stream. Fix this and also
add a proper comment.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 28 Feb 2022 19:08:24 +0000 (12:08 -0700)]
fdt: sandbox: Avoid looking for an appended device tree
We don't use an appended tree for sandbox and the required symbols are
not present. Add a condition to avoid a build error.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 28 Feb 2022 19:08:23 +0000 (12:08 -0700)]
fdt: Correct condition for SEPARATE_BSS
This may have different settings for SPL and TPL. Correct the condition.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 28 Feb 2022 19:08:22 +0000 (12:08 -0700)]
abuf: Correct a corner case with abuf_realloc()
If the buffer is empty and not allocated, then abuf_realloc() tries to
copy invalid data. This happens because an incorrect change to use
memdup() was added after the original code was written.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 28 Feb 2022 19:08:21 +0000 (12:08 -0700)]
errno: Avoid including strings in SPL
At present the header file defines this function in SPL but the file may
not actually be built. This causes a build error if the option is enabled.
Fix the condition in the header file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 28 Feb 2022 19:08:20 +0000 (12:08 -0700)]
binman: Correct Chromium OS entry types
The conversion to bintools broke the invocation of the utility, since
the arguments are not correct. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tom Rini [Wed, 6 Apr 2022 15:52:17 +0000 (11:52 -0400)]
Merge https://source.denx.de/u-boot/custodians/u-boot-riscv
Tom Rini [Wed, 6 Apr 2022 15:51:00 +0000 (11:51 -0400)]
Merge branch '2022-04-06-assorted-updates'
- Add DM_PMIC support to TPS65217 and migrate some platforms to it.
- mkimage verification fixes
- DM rST fix, add missing flag when linking u-boot-elf.o
Heinrich Schuchardt [Thu, 24 Mar 2022 15:22:32 +0000 (16:22 +0100)]
dm: fix function documentation in include/dm/ofnode.h
We use Sphinx style comments to describe functions.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Pali Rohár [Fri, 14 Jan 2022 17:34:43 +0000 (18:34 +0100)]
tools: mkimage: Call verify_header after writing image to disk
If image backend provides verify_header callback then call it after writing
image to disk. This ensures that written image is correct.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Yi Liu [Wed, 30 Mar 2022 10:05:59 +0000 (18:05 +0800)]
tools: mkimage: No need to verify_header for header_v2
rockchip header_v2 do not have a spl_hdr, so remove the verify.
Signed-off-by: Yi Liu <liuyi@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Du Huanpeng [Wed, 30 Mar 2022 18:41:42 +0000 (02:41 +0800)]
Makefile: add endian link flag to u-boot-elf.o
fix compile error when using a little-endian to build with configs:
sfr_nb4-ser_ram_defconfig
comtrend_wap5813n_ram_defconfig
comtrend_ar5387un_ram_defconfig
comtrend_ct5361_ram_defconfig
comtrend_vr3032u_ram_defconfig
comtrend_ar5315u_ram_defconfig
huawei_hg556a_ram_defconfig
netgear_dgnd3700v2_ram_defconfig
Signed-off-by: Du Huanpeng <dhu@hodcarrier.org>
Heinrich Schuchardt [Tue, 5 Apr 2022 14:47:15 +0000 (16:47 +0200)]
riscv: alloc space exhausted
When trying to run qemu-riscv64_smode_defconfig with 32 harts booting
fails. The debug UART shows a message
alloc space exhausted
32 is the current maximum number of harts for machine virt in QEMU 7.0.
Raise the default for SYS_MALLOC_F_LEN to 16 KiB.
Move the setting to /Kconfig where we define SYS_MALLOC_F_LEN for
other architectures too.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Heinrich Schuchardt [Wed, 23 Mar 2022 21:46:43 +0000 (22:46 +0100)]
riscv: enable CONFIG_CMD_SBI for QEMU boards
Let CONFIG_TARGET_QEMU_VIRT imply CONFIG_CMD_SBI.
The sbi command provides detailed information about the SBI.
It is useful to test the discovery of extensions.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Heinrich Schuchardt [Thu, 17 Mar 2022 06:36:15 +0000 (07:36 +0100)]
cmd/sbi: add missing SBI information
Let the sbi command display:
* machine vendor ID
* machine architecture ID
* machine implementation ID
With this patch the output for the HiFive Unmatched looks like
=> sbi
SBI 0.3
OpenSBI 0.9
Machine:
Vendor ID 489
Architecture ID
8000000000000007
Implementation ID
20181004
Extensions:
sbi_set_timer
sbi_console_putchar
sbi_console_getchar
sbi_clear_ipi
sbi_send_ipi
sbi_remote_fence_i
sbi_remote_sfence_vma
sbi_remote_sfence_vma_asid
sbi_shutdown
SBI Base Functionality
Timer Extension
IPI Extension
RFENCE Extension
Hart State Management Extension
System Reset Extension
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Heinrich Schuchardt [Thu, 17 Mar 2022 06:36:14 +0000 (07:36 +0100)]
riscv: provide missing base extension functions
Provide library functions to read:
* machine vendor ID
* machine architecture ID
* machine implementation ID
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Heinrich Schuchardt [Wed, 16 Mar 2022 20:21:18 +0000 (21:21 +0100)]
cmd: sbi: add Performance Monitoring Unit Extension
Version 1.0-rc3 of the RISC-V Supervisor Binary Interface Specification
has added the Performance Monitoring Unit Extension.
The sbi command should be able to detect it.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Lukasz Majewski [Sat, 12 Mar 2022 07:11:11 +0000 (08:11 +0100)]
power: pmic: Provide DM_PMIC support for tps65217 driver
The tps65217 PMIC driver is used with am335x SoC based designs.
It is used in the SPL (MLO) as well, so the DM conversion only is
for u-boot proper.
This driver only allows simple reading/writing/dumping of the content
of its registers and requires the DM_I2C for proper operation.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Lukasz Majewski [Sat, 12 Mar 2022 07:11:10 +0000 (08:11 +0100)]
power: Rename CONFIG_POWER_TPS65217 with CONFIG_PMIC_TPS65217
Up till now the CONFIG_POWER_TPS65217 has been defined in several header
files for am335x SoC.
This patch renames it to CONFIG_PMIC_TPS65217, which better reflects the
role of this IC circuit.
Moreover, new CONFIG_PMIC_TPS65217 has been introduced in Kconfig
to be used with boards, which both support DM_PMIC and DM_I2C.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
[trini: Migrate all other platforms as well]
Signed-off-by: Tom Rini <trini@konsulko.com>