i2c: fix missing pm_runtime_put_sync in i2c_device_probe

[ Upstream commit 3c3dd56f760da056e821ac177e3ad0de4209a435 ]

In case of the I2C client exposes the flag I2C_CLIENT_HOST_NOTIFY,
pm_runtime_get_sync is called in order to always keep active the
adapter. However later on, pm_runtime_put_sync is never called
within the function in case of an error. This commit add this
error handling.

Fixes: 72bfcee11cf8 ("i2c: Prevent runtime suspend of adapter when Host Notify is required")
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ubifs: remove broken lazytime support

[ Upstream commit ecf84096a526f2632ee85c32a3d05de3fa60ce80 ]

When "ubifs: introduce UBIFS_ATIME_SUPPORT to ubifs" introduced atime
support to ubifs, it also added lazytime support.  As far as I can tell
the lazytime support is terminally broken, as it causes
mark_inode_dirty_sync to be called from __writeback_single_inode, which
will then trigger the locking assert in ubifs_dirty_inode.  Just remove
the broken lazytime support for now, it can be added back later,
especially as some infrastructure changes should make that easier soon.

Fixes: 8c1c5f263833 ("ubifs: introduce UBIFS_ATIME_SUPPORT to ubifs")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fix multiplication overflow in copy_fdtable()

[ Upstream commit 4e89b7210403fa4a8acafe7c602b6212b7af6c3b ]

cpy and set really should be size_t; we won't get an overflow on that,
since sysctl_nr_open can't be set above ~(size_t)0 / sizeof(void *),
so nr that would've managed to overflow size_t on that multiplication
won't get anywhere near copy_fdtable() - we'll fail with EMFILE
before that.

Cc: stable@kernel.org # v2.6.25+
Fixes: 9cfe015aa424 (get rid of NR_OPEN and introduce a sysctl_nr_open)
Reported-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: spinand: Propagate ECC information to the MTD structure

[ Upstream commit 3507273d5a4d3c2e46f9d3f9ed9449805f5dff07 ]

This is done by default in the raw NAND core (nand_base.c) but was
missing in the SPI-NAND core. Without these two lines the ecc_strength
and ecc_step_size values are not exported to the user through sysfs.

Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: EC: PM: Avoid flushing EC work when EC GPE is inactive

[ Upstream commit 607b9df63057a56f6172d560d5366cca6a030c76 ]

Flushing the EC work while suspended to idle when the EC GPE status
is not set causes some EC wakeup events (notably power button and
lid ones) to be missed after a series of spurious wakeups on the Dell
XPS13 9360 in my office.

If that happens, the machine cannot be woken up from suspend-to-idle
by the power button or lid status change and it needs to be woken up
in some other way (eg. by a key press).

Flushing the EC work only after successful dispatching the EC GPE,
which means that its status has been set, avoids the issue, so change
the code in question accordingly.

Fixes: 7b301750f7f8 ("ACPI: EC: PM: Avoid premature returns from acpi_s2idle_wake()")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ubifs: fix wrong use of crypto_shash_descsize()

[ Upstream commit 3c3c32f85b6cc05e5db78693457deff03ac0f434 ]

crypto_shash_descsize() returns the size of the shash_desc context
needed to compute the hash, not the size of the hash itself.

crypto_shash_digestsize() would be correct, or alternatively using
c->hash_len and c->hmac_desc_len which already store the correct values.
But actually it's simpler to just use stack arrays, so do that instead.

Fixes: 49525e5eecca ("ubifs: Add helper functions for authentication support")
Fixes: da8ef65f9573 ("ubifs: Authenticate replayed journal")
Cc: <stable@vger.kernel.org> # v4.20+
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ima: Fix return value of ima_write_policy()

[ Upstream commit 2e3a34e9f409ebe83d1af7cd2f49fca7af97dfac ]

This patch fixes the return value of ima_write_policy() when a new policy
is directly passed to IMA and the current policy requires appraisal of the
file containing the policy. Currently, if appraisal is not in ENFORCE mode,
ima_write_policy() returns 0 and leads user space applications to an
endless loop. Fix this issue by denying the operation regardless of the
appraisal mode.

Cc: stable@vger.kernel.org # 4.10.x
Fixes: 19f8a84713edc ("ima: measure and appraise the IMA policy itself")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

evm: Check also if *tfm is an error pointer in init_desc()

[ Upstream commit 53de3b080d5eae31d0de219617155dcc34e7d698 ]

This patch avoids a kernel panic due to accessing an error pointer set by
crypto_alloc_shash(). It occurs especially when there are many files that
require an unsupported algorithm, as it would increase the likelihood of
the following race condition:

Task A: *tfm = crypto_alloc_shash() <= error pointer
Task B: if (*tfm == NULL) <= *tfm is not NULL, use it
Task B: rc = crypto_shash_init(desc) <= panic
Task A: *tfm = NULL

This patch uses the IS_ERR_OR_NULL macro to determine whether or not a new
crypto context must be created.

Cc: stable@vger.kernel.org
Fixes: d46eb3699502b ("evm: crypto hash replaced by shash")
Co-developed-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com>
Signed-off-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ima: Set file->f_mode instead of file->f_flags in ima_calc_file_hash()

[ Upstream commit 0014cc04e8ec077dc482f00c87dfd949cfe2b98f ]

Commit a408e4a86b36 ("ima: open a new file instance if no read
permissions") tries to create a new file descriptor to calculate a file
digest if the file has not been opened with O_RDONLY flag. However, if a
new file descriptor cannot be obtained, it sets the FMODE_READ flag to
file->f_flags instead of file->f_mode.

This patch fixes this issue by replacing f_flags with f_mode as it was
before that commit.

Cc: stable@vger.kernel.org # 4.20.x
Fixes: a408e4a86b36 ("ima: open a new file instance if no read permissions")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: SVM: Fix potential memory leak in svm_cpu_init()

commit d80b64ff297e40c2b6f7d7abc1b3eba70d22a068 upstream.

When kmalloc memory for sd->sev_vmcbs failed, we forget to free the page
held by sd->save_area. Also get rid of the var r as '-ENOMEM' is actually
the only possible outcome here.

Reviewed-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: dev: Fix the race between the release of i2c_dev and cdev

commit 1413ef638abae4ab5621901cf4d8ef08a4a48ba6 upstream.

The struct cdev is embedded in the struct i2c_dev. In the current code,
we would free the i2c_dev struct directly in put_i2c_dev(), but the
cdev is manged by a kobject, and the release of it is not predictable.
So it is very possible that the i2c_dev is freed before the cdev is
entirely released. We can easily get the following call trace with
CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled.
  ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38
  WARNING: CPU: 19 PID: 1 at lib/debugobjects.c:325 debug_print_object+0xb0/0xf0
  Modules linked in:
  CPU: 19 PID: 1 Comm: swapper/0 Tainted: G        W         5.2.20-yocto-standard+ #120
  Hardware name: Marvell OcteonTX CN96XX board (DT)
  pstate: 80c00089 (Nzcv daIf +PAN +UAO)
  pc : debug_print_object+0xb0/0xf0
  lr : debug_print_object+0xb0/0xf0
  sp : ffff00001292f7d0
  x29: ffff00001292f7d0 x28: ffff800b82151788
  x27: 0000000000000001 x26: ffff800b892c0000
  x25: ffff0000124a2558 x24: 0000000000000000
  x23: ffff00001107a1d8 x22: ffff0000116b5088
  x21: ffff800bdc6afca8 x20: ffff000012471ae8
  x19: ffff00001168f2c8 x18: 0000000000000010
  x17: 00000000fd6f304b x16: 00000000ee79de43
  x15: ffff800bc0e80568 x14: 79616c6564203a74
  x13: 6e6968207473696c x12: 5f72656d6974203a
  x11: ffff0000113f0018 x10: 0000000000000000
  x9 : 000000000000001f x8 : 0000000000000000
  x7 : ffff0000101294cc x6 : 0000000000000000
  x5 : 0000000000000000 x4 : 0000000000000001
  x3 : 00000000ffffffff x2 : 0000000000000000
  x1 : 387fc15c8ec0f200 x0 : 0000000000000000
  Call trace:
   debug_print_object+0xb0/0xf0
   __debug_check_no_obj_freed+0x19c/0x228
   debug_check_no_obj_freed+0x1c/0x28
   kfree+0x250/0x440
   put_i2c_dev+0x68/0x78
   i2cdev_detach_adapter+0x60/0xc8
   i2cdev_notifier_call+0x3c/0x70
   notifier_call_chain+0x8c/0xe8
   blocking_notifier_call_chain+0x64/0x88
   device_del+0x74/0x380
   device_unregister+0x54/0x78
   i2c_del_adapter+0x278/0x2d0
   unittest_i2c_bus_remove+0x3c/0x80
   platform_drv_remove+0x30/0x50
   device_release_driver_internal+0xf4/0x1c0
   driver_detach+0x58/0xa0
   bus_remove_driver+0x84/0xd8
   driver_unregister+0x34/0x60
   platform_driver_unregister+0x20/0x30
   of_unittest_overlay+0x8d4/0xbe0
   of_unittest+0xae8/0xb3c
   do_one_initcall+0xac/0x450
   do_initcall_level+0x208/0x224
   kernel_init_freeable+0x2d8/0x36c
   kernel_init+0x18/0x108
   ret_from_fork+0x10/0x1c
  irq event stamp: 3934661
  hardirqs last  enabled at (3934661): [<ffff00001009fa04>] debug_exception_exit+0x4c/0x58
  hardirqs last disabled at (3934660): [<ffff00001009fb14>] debug_exception_enter+0xa4/0xe0
  softirqs last  enabled at (3934654): [<ffff000010081d94>] __do_softirq+0x46c/0x628
  softirqs last disabled at (3934649): [<ffff0000100b4a1c>] irq_exit+0x104/0x118

This is a common issue when using cdev embedded in a struct.
Fortunately, we already have a mechanism to solve this kind of issue.
Please see commit 233ed09d7fda ("chardev: add helper function to
register char devs with a struct device") for more detail.

In this patch, we choose to embed the struct device into the i2c_dev,
and use the API provided by the commit 233ed09d7fda to make sure that
the release of i2c_dev and cdev are in sequence.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.4.42

bpf: Test_progs, fix test_get_stack_rawtp_err.c build

The linux-5.4.y commit 8781011a302b ("bpf: Test_progs, add test to catch
retval refine error handling") fails to build when libbpf headers are
not installed, as it tries to include <bpf/bpf_helpers.h>:

  progs/test_get_stack_rawtp_err.c:4:10:
      fatal error: 'bpf/bpf_helpers.h' file not found

For 5.4-stable (only) the new test prog needs to include "bpf_helpers.h"
instead (like all the rest of progs/*.c do) because 5.4-stable does not
carry commit e01a75c15969 ("libbpf: Move bpf_{helpers, helper_defs,
endian, tracing}.h into libbpf").

Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Fixes: 8781011a302b ("bpf: Test_progs, add test to catch retval refine error handling")
Cc: <stable@vger.kernel.org> # v5.4
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftest/bpf: fix backported test_select_reuseport selftest changes

Fix up RET_IF as CHECK macro to make selftests compile again.

Fixes: b911c5e8686a ("selftests: bpf: Reset global state between reuseport test runs")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libbpf: Extract and generalize CPU mask parsing logic

commit 6803ee25f0ead1e836808acb14396bb9a9849113 upstream.

This logic is re-used for parsing a set of online CPUs. Having it as an
isolated piece of code working with input string makes it conveninent to test
this logic as well. While refactoring, also improve the robustness of original
implementation.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191212013548.1690564-1-andriin@fb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Makefile: disallow data races on gcc-10 as well

commit b1112139a103b4b1101d0d2d72931f2d33d8c978 upstream.

gcc-10 will rename --param=allow-store-data-races=0
to -fno-allow-store-data-races.

The flag change happened at https://gcc.gnu.org/PR92046.

Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Thomas Backlund <tmb@mageia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Fix off-by-one error in kvm_vcpu_ioctl_x86_setup_mce

commit c4e0e4ab4cf3ec2b3f0b628ead108d677644ebd9 upstream.

Bank_num is a one-based count of banks, not a zero-based index. It
overflows the allocated space only when strictly greater than
KVM_MAX_MCE_BANKS.

Fixes: a9e38c3e01ad ("KVM: x86: Catch potential overrun in MCE setup")
Signed-off-by: Jue Wang <juew@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <20200511225616.19557-1-jmattson@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Fix sk_psock refcnt leak when receiving message

commit 18f02ad19e2c2a1d9e1d55a4e1c0cbf51419151c upstream.

tcp_bpf_recvmsg() invokes sk_psock_get(), which returns a reference of
the specified sk_psock object to "psock" with increased refcnt.

When tcp_bpf_recvmsg() returns, local variable "psock" becomes invalid,
so the refcount should be decreased to keep refcount balanced.

The reference counting issue happens in several exception handling paths
of tcp_bpf_recvmsg(). When those error scenarios occur such as "flags"
includes MSG_ERRQUEUE, the function forgets to decrease the refcnt
increased by sk_psock_get(), causing a refcnt leak.

Fix this issue by calling sk_psock_put() or pulling up the error queue
read handling when those error scenarios occur.

Fixes: e7a5f1f1cd000 ("bpf/sockmap: Read psock ingress_msg before sk_receive_queue")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/1587872115-42805-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SUNRPC: Revert 241b1f419f0e ("SUNRPC: Remove xdr_buf_trim()")

commit 0a8e7b7d08466b5fc52f8e96070acc116d82a8bb upstream.

I've noticed that when krb5i or krb5p security is in use,
retransmitted requests are missing the server's duplicate reply
cache. The computed checksum on the retransmitted request does not
match the cached checksum, resulting in the server performing the
retransmitted request again instead of returning the cached reply.

The assumptions made when removing xdr_buf_trim() were not correct.
In the send paths, the upper layer has already set the segment
lengths correctly, and shorting the buffer's content is simply a
matter of reducing buf->len.

xdr_buf_trim() is the right answer in the receive/unwrap path on
both the client and the server. The buffer segment lengths have to
be shortened one-by-one.

On the server side in particular, head.iov_len needs to be updated
correctly to enable nfsd_cache_csum() to work correctly. The simple
buf->len computation doesn't do that, and that results in
checksumming stale data in the buffer.

The problem isn't noticed until there's significant instability of
the RPC transport. At that point, the reliability of retransmit
detection on the server becomes crucial.

Fixes: 241b1f419f0e ("SUNRPC: Remove xdr_buf_trim()")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: r8a7740: Add missing extal2 to CPG node

commit e47cb97f153193d4b41ca8d48127da14513d54c7 upstream.

The Clock Pulse Generator (CPG) device node lacks the extal2 clock.
This may lead to a failure registering the "r" clock, or to a wrong
parent for the "usb24s" clock, depending on MD_CK2 pin configuration and
boot loader CPG_USBCKCR register configuration.

This went unnoticed, as this does not affect the single upstream board
configuration, which relies on the first clock input only.

Fixes: d9ffd583bf345e2e ("ARM: shmobile: r8a7740: add SoC clocks to DTS")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Link: https://lore.kernel.org/r/20200508095918.6061-1-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: renesas: r8a77980: Fix IPMMU VIP[01] nodes

commit f4d71c6ea9e58c07dd4d02d09c5dd9bb780ec4b1 upstream.

Missing the renesas,ipmmu-main property on ipmmu_vip[01] nodes.

Fixes: 55697cbb44e4 ("arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes)
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1587108543-23786-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: r8a73a4: Add missing CMT1 interrupts

commit 0f739fdfe9e5ce668bd6d3210f310df282321837 upstream.

The R-Mobile APE6 Compare Match Timer 1 generates 8 interrupts, one for
each channel, but currently only 1 is described.
Fix this by adding the missing interrupts.

Fixes: f7b65230019b9dac ("ARM: shmobile: r8a73a4: Add CMT1 node")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200408090926.25201-1-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: imx8mn: Change SDMA1 ahb clock for imx8mn

commit 15ddc3e17aec0de4c69d595b873e184432b9791d upstream.

Using SDMA1 with UART1 is causing a "Timeout waiting for CH0" error.
This patch changes to ahb clock from SDMA1_ROOT to AHB which fixes the
timeout error.

Fixes: 6c3debcbae47 ("arm64: dts: freescale: Add i.MX8MN dtsi support")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: rockchip: Rename dwc3 device nodes on rk3399 to make dtc happy

commit 190c7f6fd43a776d4a6da1dac44408104649e9b7 upstream.

The device tree compiler complains that the dwc3 nodes have regs
properties but no matching unit addresses.

Add the unit addresses to the device node name. While at it, also rename
the nodes from "dwc3" to "usb", as guidelines require device nodes have
generic names.

Fixes: 7144224f2c2b ("arm64: dts: rockchip: support dwc3 USB for rk3399")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200327030414.5903-7-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: rockchip: Replace RK805 PMIC node name with "pmic" on rk3328 boards

commit 83b994129fb4c18a8460fd395864a28740e5e7fb upstream.

In some board device tree files, "rk805" was used for the RK805 PMIC's
node name. However the policy for device trees is that generic names
should be used.

Replace the "rk805" node name with the generic "pmic" name.

Fixes: 1e28037ec88e ("arm64: dts: rockchip: add rk805 node for rk3328-evb")
Fixes: 955bebde057e ("arm64: dts: rockchip: add rk3328-rock64 board")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200327030414.5903-3-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: meson-g12-common: fix dwc2 clock names

commit e4f634d812634067b0c661af2e3cecfd629c89b8 upstream.

Use the correct dwc2 clock name.

Fixes: 9baf7d6be730 ("arm64: dts: meson: g12a: Add G12A USB nodes")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20200326160857.11929-3-narmstrong@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: meson-g12b-khadas-vim3: add missing frddr_a status property

commit 5ac0869fb39b1c1ba84d4d75c550f82e0bf44c96 upstream.

In the process of moving the VIM3 audio nodes to a G12B specific dtsi
for enabling the SM1 based VIM3L, the frddr_a status = "okay" property
got dropped.
This re-enables the frddr_a node to fix audio support.

Fixes: 4f26cc1c96c9 ("arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi")
Reported-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20191018140216.4257-1-narmstrong@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: Unlink clock if failed to prepare or enable

commit 018d4671b9bbd4a5c55cf6eab3e1dbc70a50b66e upstream.

On failing to prepare or enable a clock, remove the core structure
from the list it has been inserted as it is about to be freed.

This otherwise leads to random crashes when subsequent clocks get
registered, during which parsing of the clock tree becomes adventurous.

Observed with QEMU's RPi-3 emulation.

Fixes: 12ead77432f2 ("clk: Don't try to enable critical clocks if prepare failed")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Link: https://lkml.kernel.org/r/20200505140953.409430-1-maz@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "ALSA: hda/realtek: Fix pop noise on ALC225"

commit f41224efcf8aafe80ea47ac870c5e32f3209ffc8 upstream.

This reverts commit 3b36b13d5e69d6f51ff1c55d1b404a74646c9757.

Enable power save node breaks some systems with ACL225. Revert the patch
and use a platform specific quirk for the original issue isntead.

Fixes: 3b36b13d5e69 ("ALSA: hda/realtek: Fix pop noise on ALC225")
BugLink: https://bugs.launchpad.net/bugs/1875916
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200503152449.22761-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: legacy: fix error return code in cdc_bind()

commit e8f7f9e3499a6d96f7f63a4818dc7d0f45a7783b upstream.

If 'usb_otg_descriptor_alloc()' fails, we must return a
negative error code -ENOMEM, not 0.

Fixes: ab6796ae9833 ("usb: gadget: cdc2: allocate and init otg descriptor by otg capabilities")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: legacy: fix error return code in gncm_bind()

commit e27d4b30b71c66986196d8a1eb93cba9f602904a upstream.

If 'usb_otg_descriptor_alloc()' fails, we must return a
negative error code -ENOMEM, not 0.

Fixes: 1156e91dd7cc ("usb: gadget: ncm: allocate and init otg descriptor by otg capabilities")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: audio: Fix a missing error return value in audio_bind()

commit 19b94c1f9c9a16d41a8de3ccbdb8536cf1aecdbf upstream.

If 'usb_otg_descriptor_alloc()' fails, we must return an error code, not 0.

Fixes: 56023ce0fd70 ("usb: gadget: audio: allocate and init otg descriptor by otg capabilities")
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: net2272: Fix a memory leak in an error handling path in 'net2272_plat_probe()'

commit ccaef7e6e354fb65758eaddd3eae8065a8b3e295 upstream.

'dev' is allocated in 'net2272_probe_init()'. It must be freed in the error
handling path, as already done in the remove function (i.e.
'net2272_plat_remove()')

Fixes: 90fccb529d24 ("usb: gadget: Gadget directory cleanup - group UDC drivers")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fanotify: fix merging marks masks with FAN_ONDIR

commit 55bf882c7f13dda8bbe624040c6d5b4fbb812d16 upstream.

Change the logic of FAN_ONDIR in two ways that are similar to the logic
of FAN_EVENT_ON_CHILD, that was fixed in commit 54a307ba8d3c ("fanotify:
fix logic of events on child"):

1. The flag is meaningless in ignore mask
2. The flag refers only to events in the mask of the mark where it is set

This is what the fanotify_mark.2 man page says about FAN_ONDIR:
"Without this flag, only events for files are created."  It doesn't
say anything about setting this flag in ignore mask to stop getting
events on directories nor can I think of any setup where this capability
would be useful.

Currently, when marks masks are merged, the FAN_ONDIR flag set in one
mark affects the events that are set in another mark's mask and this
behavior causes unexpected results.  For example, a user adds a mark on a
directory with mask FAN_ATTRIB | FAN_ONDIR and a mount mark with mask
FAN_OPEN (without FAN_ONDIR).  An opendir() of that directory (which is
inside that mount) generates a FAN_OPEN event even though neither of the
marks requested to get open events on directories.

Link: https://lore.kernel.org/r/20200319151022.31456-10-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Rachel Sibley <rasibley@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dwc3: Remove check for HWO flag in dwc3_gadget_ep_reclaim_trb_sg()

commit 00e21763f2c8cab21b7befa52996d1b18bde5c42 upstream.

The check for the HWO flag in dwc3_gadget_ep_reclaim_trb_sg()
causes us to break out of the loop before we call
dwc3_gadget_ep_reclaim_completed_trb(), which is what likely
should be clearing the HWO flag.

This can cause odd behavior where we never reclaim all the trbs
in the sg list, so we never call giveback on a usb req, and that
will causes transfer stalls.

This effectively resovles the adb stalls seen on HiKey960
after userland changes started only using AIO in adbd.

Cc: YongQin Liu <yongqin.liu@linaro.org>
Cc: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
Cc: Yang Fei <fei.yang@intel.com>
Cc: Thinh Nguyen <thinhn@synopsys.com>
Cc: Tejas Joglekar <tejas.joglekar@synopsys.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: Josh Gao <jmgao@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Cc: stable@vger.kernel.org #4.20+
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: rockchip: fix incorrect configuration of rk3228 aclk_gpu* clocks

commit cec9d101d70a3509da9bd2e601e0b242154ce616 upstream.

The following changes prevent the unrecoverable freezes and rcu_sched
stall warnings experienced in each of my attempts to take advantage of
lima.

Replace the COMPOSITE_NOGATE definition of aclk_gpu_pre with a
COMPOSITE that retains the selection of HDMIPHY as the PLL source, but
instead makes uses of the aclk_gpu PLL source gate and parent names
defined by mux_pll_src_4plls_p rather than mux_aclk_gpu_pre_p.

Remove the now unused mux_aclk_gpu_pre_p and the four named but also
unused definitions (cpll_gpu, gpll_gpu, hdmiphy_gpu and usb480m_gpu)
of the aclk_gpu PLL source gate.

Use the correct gate offset for aclk_gpu and aclk_gpu_noc.

Fixes: 307a2e9ac524 ("clk: rockchip: add clock controller for rk3228")
Cc: stable@vger.kernel.org
Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
[double-checked against SoC manual and added fixes tag]
Link: https://lore.kernel.org/r/20200114162503.7548-1-justin.swartz@risingedge.co.za
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exec: Move would_dump into flush_old_exec

commit f87d1c9559164294040e58f5e3b74a162bf7c6e8 upstream.

I goofed when I added mm->user_ns support to would_dump.  I missed the
fact that in the case of binfmt_loader, binfmt_em86, binfmt_misc, and
binfmt_script bprm->file is reassigned.  Which made the move of
would_dump from setup_new_exec to __do_execve_file before exec_binprm
incorrect as it can result in would_dump running on the script instead
of the interpreter of the script.

The net result is that the code stopped making unreadable interpreters
undumpable.  Which allows them to be ptraced and written to disk
without special permissions.  Oops.

The move was necessary because the call in set_new_exec was after
bprm->mm was no longer valid.

To correct this mistake move the misplaced would_dump from
__do_execve_file into flos_old_exec, before exec_mmap is called.

I tested and confirmed that without this fix I can attach with gdb to
a script with an unreadable interpreter, and with this fix I can not.

Cc: stable@vger.kernel.org
Fixes: f84df2a6f268 ("exec: Ensure mm->user_ns contains the execed files")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/unwind/orc: Fix error handling in __unwind_start()

commit 71c95825289f585014fe9741b051d32a7a916680 upstream.

The unwind_state 'error' field is used to inform the reliable unwinding
code that the stack trace can't be trusted.  Set this field for all
errors in __unwind_start().

Also, move the zeroing out of the unwind_state struct to before the ORC
table initialization check, to prevent the caller from reading
uninitialized data if the ORC table is corrupted.

Fixes: af085d9084b4 ("stacktrace/x86: add function for detecting reliable stack traces")
Fixes: d3a09104018c ("x86/unwinder/orc: Dont bail on stack overflow")
Fixes: 98d0c8ebf77e ("x86/unwind/orc: Prevent unwinding before ORC initialization")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/d6ac7215a84ca92b895fdd2e1aa546729417e6e6.1589487277.git.jpoimboe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86: Fix early boot crash on gcc-10, third try

commit a9a3ed1eff3601b63aea4fb462d8b3b92c7c1e7e upstream.

... or the odyssey of trying to disable the stack protector for the
function which generates the stack canary value.

The whole story started with Sergei reporting a boot crash with a kernel
built with gcc-10:

  Kernel panic — not syncing: stack-protector: Kernel stack is corrupted in: start_secondary
  CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc5—00235—gfffb08b37df9 #139
  Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77M—D3H, BIOS F12 11/14/2013
  Call Trace:
    dump_stack
    panic
    ? start_secondary
    __stack_chk_fail
    start_secondary
    secondary_startup_64
  -—-[ end Kernel panic — not syncing: stack—protector: Kernel stack is corrupted in: start_secondary

This happens because gcc-10 tail-call optimizes the last function call
in start_secondary() - cpu_startup_entry() - and thus emits a stack
canary check which fails because the canary value changes after the
boot_init_stack_canary() call.

To fix that, the initial attempt was to mark the one function which
generates the stack canary with:

  __attribute__((optimize("-fno-stack-protector"))) ... start_secondary(void *unused)

however, using the optimize attribute doesn't work cumulatively
as the attribute does not add to but rather replaces previously
supplied optimization options - roughly all -fxxx options.

The key one among them being -fno-omit-frame-pointer and thus leading to
not present frame pointer - frame pointer which the kernel needs.

The next attempt to prevent compilers from tail-call optimizing
the last function call cpu_startup_entry(), shy of carving out
start_secondary() into a separate compilation unit and building it with
-fno-stack-protector, was to add an empty asm("").

This current solution was short and sweet, and reportedly, is supported
by both compilers but we didn't get very far this time: future (LTO?)
optimization passes could potentially eliminate this, which leads us
to the third attempt: having an actual memory barrier there which the
compiler cannot ignore or move around etc.

That should hold for a long time, but hey we said that about the other
two solutions too so...

Reported-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Kalle Valo <kvalo@codeaurora.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200314164451.346497-1-slyfox@gentoo.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix leaked reference on requeued write

commit a48137996063d22ffba77e077425f49873856ca5 upstream.

Failed async writes that are requeued may not clean up a refcount
on the file, which can result in a leaked open. This scenario arises
very reliably when using persistent handles and a reconnect occurs
while writing.

cifs_writev_requeue only releases the reference if the write fails
(rc != 0). The server->ops->async_writev operation will take its own
reference, so the initial reference can always be released.

Signed-off-by: Adam McCoy <adam@forsedomani.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/32s: Fix build failure with CONFIG_PPC_KUAP_DEBUG

commit 4833ce06e6855d526234618b746ffb71d6612c9a upstream.

gpr2 is not a parametre of kuap_check(), it doesn't exist.

Use gpr instead.

Fixes: a68c31fc01ef ("powerpc/32s: Implement Kernel Userspace Access Protection")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/ea599546f2a7771bde551393889e44e6b2632332.1587368807.git.christophe.leroy@c-s.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: add basic atomic check for cursor plane

commit 626bf90fe03fa080d8df06bb0397c95c53ae8e27 upstream.

This patch adds a basic cursor check when an atomic test-only commit is
performed. The position and size of the cursor plane is checked.

This should fix user-space relying on atomic checks to assign buffers to
planes.

Signed-off-by: Simon Ser <contact@emersion.fr>
Reported-by: Roman Gilg <subdiff@gmail.com>
References: https://github.com/emersion/libliftoff/issues/46
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx6dl-yapp4: Fix Ursa board Ethernet connection

commit cbe63a8358310244e6007398bd2c7c70c7fd51cd upstream.

The Y Soft yapp4 platform supports up to two Ethernet ports.
The Ursa board though has only one Ethernet port populated and that is
the port@2. Since the introduction of this platform into mainline a wrong
port was deleted and the Ethernet could never work. Fix this by deleting
the correct port node.

Fixes: 87489ec3a77f ("ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx27-phytec-phycard-s-rdk: Fix the I2C1 pinctrl entries

commit 0caf34350a25907515d929a9c77b9b206aac6d1e upstream.

The I2C2 pins are already used and the following errors are seen:

imx27-pinctrl 10015000.iomuxc: pin MX27_PAD_I2C2_SDA already requested by 10012000.i2c; cannot claim for 1001d000.i2c
imx27-pinctrl 10015000.iomuxc: pin-69 (1001d000.i2c) status -22
imx27-pinctrl 10015000.iomuxc: could not request pin 69 (MX27_PAD_I2C2_SDA) from group i2c2grp  on device 10015000.iomuxc
imx-i2c 1001d000.i2c: Error applying setting, reverse things back
imx-i2c: probe of 1001d000.i2c failed with error -22

Fix it by adding the correct I2C1 IOMUX entries for the pinctrl_i2c1 group.

Cc: <stable@vger.kernel.org>
Fixes: 61664d0b432a ("ARM: dts: imx27 phyCARD-S pinctrl")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: dra7: Fix bus_dma_limit for PCIe

commit 90d4d3f4ea45370d482fa609dbae4d2281b4074f upstream.

Even though commit cfb5d65f2595 ("ARM: dts: dra7: Add bus_dma_limit
for L3 bus") added bus_dma_limit for L3 bus, the PCIe controller
gets incorrect value of bus_dma_limit.

Fix it by adding empty dma-ranges property to axi@0 and axi@1
(parent device tree node of PCIe controller).

Cc: stable@kernel.org
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Make the "Reducing compressed framebufer size" message be DRM_INFO_ONCE()

commit 82152d424b6cb6fc1ede7d03d69c04e786688740 upstream.

This was sort of annoying me:

random:~$ dmesg | tail -1
[523884.039227] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
random:~$ dmesg | grep -c "Reducing the compressed"
47

This patch makes it DRM_INFO_ONCE() just like the similar message
farther down in that function is pr_info_once().

Cc: stable@vger.kernel.org
Signed-off-by: Peter Jones <pjones@redhat.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1745
Link: https://patchwork.freedesktop.org/patch/msgid/20180706190424.29194-1-pjones@redhat.com
[vsyrjala: Rebase due to per-device logging]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 6b7fc6a3e6af4ff5773949d0fed70d8e7f68d5ce)
[Rodrigo: port back to DRM_INFO_ONCE]
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: Fix NULL pointer dereference when enqueuing trbs from urb sg list

commit 3c6f8cb92c9178fc0c66b580ea3df1fa3ac1155a upstream.

On platforms with IOMMU enabled, multiple SGs can be coalesced into one
by the IOMMU driver. In that case the SG list processing as part of the
completion of a urb on a bulk endpoint can result into a NULL pointer
dereference with the below stack dump.

<6> Unable to handle kernel NULL pointer dereference at virtual address 0000000c
<6> pgd = c0004000
<6> [0000000c] *pgd=00000000
<6> Internal error: Oops: 5 [#1] PREEMPT SMP ARM
<2> PC is at xhci_queue_bulk_tx+0x454/0x80c
<2> LR is at xhci_queue_bulk_tx+0x44c/0x80c
<2> pc : [<c08907c4>]    lr : [<c08907bc>]    psr: 000000d3
<2> sp : ca337c80  ip : 00000000  fp : ffffffff
<2> r10: 00000000  r9 : 50037000  r8 : 00004000
<2> r7 : 00000000  r6 : 00004000  r5 : 00000000  r4 : 00000000
<2> r3 : 00000000  r2 : 00000082  r1 : c2c1a200  r0 : 00000000
<2> Flags: nzcv  IRQs off  FIQs off  Mode SVC_32  ISA ARM  Segment none
<2> Control: 10c0383d  Table: b412c06a  DAC: 00000051
<6> Process usb-storage (pid: 5961, stack limit = 0xca336210)
<snip>
<2> [<c08907c4>] (xhci_queue_bulk_tx)
<2> [<c0881b3c>] (xhci_urb_enqueue)
<2> [<c0831068>] (usb_hcd_submit_urb)
<2> [<c08350b4>] (usb_sg_wait)
<2> [<c089f384>] (usb_stor_bulk_transfer_sglist)
<2> [<c089f2c0>] (usb_stor_bulk_srb)
<2> [<c089fe38>] (usb_stor_Bulk_transport)
<2> [<c089f468>] (usb_stor_invoke_transport)
<2> [<c08a11b4>] (usb_stor_control_thread)
<2> [<c014a534>] (kthread)

The above NULL pointer dereference is the result of block_len and the
sent_len set to zero after the first SG of the list when IOMMU driver
is enabled. Because of this the loop of processing the SGs has run
more than num_sgs which resulted in a sg_next on the last SG of the
list which has SG_END set.

Fix this by check for the sg before any attributes of the sg are
accessed.

[modified reason for null pointer dereference in commit message subject -Mathias]
Fixes: f9c589e142d04 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer")
Cc: stable@vger.kernel.org
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200514110432.25564-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: gadget: fix illegal array access in binding with UDC

commit 15753588bcd4bbffae1cca33c8ced5722477fe1f upstream.

FuzzUSB (a variant of syzkaller) found an illegal array access
using an incorrect index while binding a gadget with UDC.

Reference: https://www.spinics.net/lists/linux-usb/msg194331.html

This bug occurs when a size variable used for a buffer
is misused to access its strcpy-ed buffer.
Given a buffer along with its size variable (taken from user input),
from which, a new buffer is created using kstrdup().
Due to the original buffer containing 0 value in the middle,
the size of the kstrdup-ed buffer becomes smaller than that of the original.
So accessing the kstrdup-ed buffer with the same size variable
triggers memory access violation.

The fix makes sure no zero value in the buffer,
by comparing the strlen() of the orignal buffer with the size variable,
so that the access to the kstrdup-ed buffer is safe.

BUG: KASAN: slab-out-of-bounds in gadget_dev_desc_UDC_store+0x1ba/0x200
drivers/usb/gadget/configfs.c:266
Read of size 1 at addr ffff88806a55dd7e by task syz-executor.0/17208

CPU: 2 PID: 17208 Comm: syz-executor.0 Not tainted 5.6.8 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xce/0x128 lib/dump_stack.c:118
 print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374
 __kasan_report+0x131/0x1b0 mm/kasan/report.c:506
 kasan_report+0x12/0x20 mm/kasan/common.c:641
 __asan_report_load1_noabort+0x14/0x20 mm/kasan/generic_report.c:132
 gadget_dev_desc_UDC_store+0x1ba/0x200 drivers/usb/gadget/configfs.c:266
 flush_write_buffer fs/configfs/file.c:251 [inline]
 configfs_write_file+0x2f1/0x4c0 fs/configfs/file.c:283
 __vfs_write+0x85/0x110 fs/read_write.c:494
 vfs_write+0x1cd/0x510 fs/read_write.c:558
 ksys_write+0x18a/0x220 fs/read_write.c:611
 __do_sys_write fs/read_write.c:623 [inline]
 __se_sys_write fs/read_write.c:620 [inline]
 __x64_sys_write+0x73/0xb0 fs/read_write.c:620
 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Signed-off-by: Kyungtae Kim <kt0755@gmail.com>
Reported-and-tested-by: Kyungtae Kim <kt0755@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200510054326.GA19198@pizza01
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdns3: gadget: prev_req->trb is NULL for ep0

commit 95cd7dc47abd71d1a0c9c43594ff2fa32552f46c upstream.

And there are no multiple TRBs on EP0 and WA1 workaround,
so it doesn't need to change TRB for EP0. It fixes below oops.

configfs-gadget gadget: high-speed config #1: b
android_work: sent uevent USB_STATE=CONFIGURED
Unable to handle kernel read from unreadable memory at virtual address 0000000000000008
Mem abort info:
android_work: sent uevent USB_STATE=DISCONNECTED
  ESR = 0x96000004
  EC = 0x25: DABT (current EL), IL = 32 bits

  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
Data abort info:
  ISV = 0, ISS = 0x00000004
  CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=00000008b5bb7000
[0000000000000008] pgd=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 PID: 430 Comm: HwBinder:401_1 Not tainted 5.4.24-06071-g6fa8921409c1-dirty #77
Hardware name: Freescale i.MX8QXP MEK (DT)
pstate: 60400085 (nZCv daIf +PAN -UAO)
pc : cdns3_gadget_ep_dequeue+0x1d4/0x270
lr : cdns3_gadget_ep_dequeue+0x48/0x270
sp : ffff800012763ba0
x29: ffff800012763ba0 x28: ffff00082c653c00
x27: 0000000000000000 x26: ffff000068fa7b00
x25: ffff0000699b2000 x24: ffff00082c6ac000
x23: ffff000834f0a480 x22: ffff000834e87b9c
x21: 0000000000000000 x20: ffff000834e87800
x19: ffff000069eddc00 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000001
x11: ffff80001180fbe8 x10: 0000000000000001
x9 : ffff800012101558 x8 : 0000000000000001
x7 : 0000000000000006 x6 : ffff000835d9c668
x5 : ffff000834f0a4c8 x4 : 0000000096000000
x3 : 0000000000001810 x2 : 0000000000000000
x1 : ffff800024bd001c x0 : 0000000000000001
Call trace:
 cdns3_gadget_ep_dequeue+0x1d4/0x270
 usb_ep_dequeue+0x34/0xf8
 composite_dev_cleanup+0x154/0x170
 configfs_composite_unbind+0x6c/0xa8
 usb_gadget_remove_driver+0x44/0x70
 usb_gadget_unregister_driver+0x74/0xe0
 unregister_gadget+0x28/0x58
 gadget_dev_desc_UDC_store+0x80/0x110
 configfs_write_file+0x1e0/0x2a0
 __vfs_write+0x48/0x90
 vfs_write+0xe4/0x1c8
 ksys_write+0x78/0x100
 __arm64_sys_write+0x24/0x30
 el0_svc_common.constprop.0+0x74/0x168
 el0_svc_handler+0x34/0xa0
 el0_svc+0x8/0xc
Code: 52830203 b9407660 f94042e4 11000400 (b9400841)
---[ end trace 1574516e4c1772ca ]---
Kernel panic - not syncing: Fatal exception
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x0002,20002008
Memory Limit: none
Rebooting in 5 seconds..

Fixes: f616c3bda47e ("usb: cdns3: Fix dequeue implementation")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci-plat: keep runtime active when removing host

commit 1449cb2c2253d37d998c3714aa9b95416d16d379 upstream.

While removing the host (e.g. for USB role switch from host to device),
if runtime pm is enabled by user, below oops occurs on dwc3 and cdns3
platforms.
Keeping the xhci-plat device active during host removal, and disabling
runtime pm before calling pm_runtime_set_suspended() fixes them.

oops1:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000240
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.4.3-00107-g64d454a-dirty
Hardware name: FSL i.MX8MP EVK (DT)
Workqueue: pm pm_runtime_work
pstate: 60000005 (nZCv daif -PAN -UAO)
pc : xhci_suspend+0x34/0x698
lr : xhci_plat_runtime_suspend+0x2c/0x38
sp : ffff800011ddbbc0
Call trace:
 xhci_suspend+0x34/0x698
 xhci_plat_runtime_suspend+0x2c/0x38
 pm_generic_runtime_suspend+0x28/0x40
 __rpm_callback+0xd8/0x138
 rpm_callback+0x24/0x98
 rpm_suspend+0xe0/0x448
 rpm_idle+0x124/0x140
 pm_runtime_work+0xa0/0xf8
 process_one_work+0x1dc/0x370
 worker_thread+0x48/0x468
 kthread+0xf0/0x120
 ret_from_fork+0x10/0x1c

oops2:
usb 2-1: USB disconnect, device number 2
xhci-hcd xhci-hcd.1.auto: remove, state 4
usb usb2: USB disconnect, device number 1
xhci-hcd xhci-hcd.1.auto: USB bus 2 deregistered
xhci-hcd xhci-hcd.1.auto: remove, state 4
usb usb1: USB disconnect, device number 1
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000138
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 PID: 7 Comm: kworker/u8:0 Not tainted 5.6.0-rc4-next-20200304-03578
Hardware name: Freescale i.MX8QXP MEK (DT)
Workqueue: 1-0050 tcpm_state_machine_work
pstate: 20000005 (nzCv daif -PAN -UAO)
pc : xhci_free_dev+0x214/0x270
lr : xhci_plat_runtime_resume+0x78/0x88
sp : ffff80001006b5b0
Call trace:
 xhci_free_dev+0x214/0x270
 xhci_plat_runtime_resume+0x78/0x88
 pm_generic_runtime_resume+0x30/0x48
 __rpm_callback+0x90/0x148
 rpm_callback+0x28/0x88
 rpm_resume+0x568/0x758
 rpm_resume+0x260/0x758
 rpm_resume+0x260/0x758
 __pm_runtime_resume+0x40/0x88
 device_release_driver_internal+0xa0/0x1c8
 device_release_driver+0x1c/0x28
 bus_remove_device+0xd4/0x158
 device_del+0x15c/0x3a0
 usb_disable_device+0xb0/0x268
 usb_disconnect+0xcc/0x300
 usb_remove_hcd+0xf4/0x1dc
 xhci_plat_remove+0x78/0xe0
 platform_drv_remove+0x30/0x50
 device_release_driver_internal+0xfc/0x1c8
 device_release_driver+0x1c/0x28
 bus_remove_device+0xd4/0x158
 device_del+0x15c/0x3a0
 platform_device_del.part.0+0x20/0x90
 platform_device_unregister+0x28/0x40
 cdns3_host_exit+0x20/0x40
 cdns3_role_stop+0x60/0x90
 cdns3_role_set+0x64/0xd8
 usb_role_switch_set_role.part.0+0x3c/0x68
 usb_role_switch_set_role+0x20/0x30
 tcpm_mux_set+0x60/0xf8
 tcpm_reset_port+0xa4/0xf0
 tcpm_detach.part.0+0x28/0x50
 tcpm_state_machine_work+0x12ac/0x2360
 process_one_work+0x1c8/0x470
 worker_thread+0x50/0x428
 kthread+0xfc/0x128
 ret_from_fork+0x10/0x18
Code: c8037c02 35ffffa3 17ffe7c3 f9800011 (c85f7c01)
---[ end trace 45b1a173d2679e44 ]---

[minor commit message cleanup  -Mathias]
Cc: Baolin Wang <baolin.wang@linaro.org>
Cc: <stable@vger.kernel.org>
Fixes: b0c69b4bace3 ("usb: host: plat: Enable xHCI plat runtime PM")
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Tested-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200514110432.25564-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: hub: limit HUB_QUIRK_DISABLE_AUTOSUSPEND to USB5534B

commit 76e1ef1d81a4129d7e2fb8c48c83b166d1c8e040 upstream.

On Tue, May 12, 2020 at 09:36:07PM +0800, Kai-Heng Feng wrote [1]:
> This patch prevents my Raven Ridge xHCI from getting runtime suspend.

The problem described in v5.6 commit 1208f9e1d758c9 ("USB: hub: Fix the
broken detection of USB3 device in SMSC hub") applies solely to the
USB5534B hub [2] present on the Kingfisher Infotainment Carrier Board,
manufactured by Shimafuji Electric Inc [3].

Despite that, the aforementioned commit applied the quirk to _all_ hubs
carrying vendor ID 0x424 (i.e. SMSC), of which there are more [4] than
initially expected. Consequently, the quirk is now enabled on platforms
carrying SMSC/Microchip hub models which potentially don't exhibit the
original issue.

To avoid reports like [1], further limit the quirk's scope to
USB5534B [2], by employing both Vendor and Product ID checks.

Tested on H3ULCB + Kingfisher rev. M05.

[1] https://lore.kernel.org/linux-renesas-soc/73933975-6F0E-40F5-9584-D2B8F615C0F3@canonical.com/
[2] https://www.microchip.com/wwwproducts/en/USB5534B
[3] http://www.shimafuji.co.jp/wp/wp-content/uploads/2018/08/SBEV-RCAR-KF-M06Board_HWSpecificationEN_Rev130.pdf
[4] https://devicehunt.com/search/type/usb/vendor/0424/device/any

Fixes: 1208f9e1d758c9 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub")
Cc: stable@vger.kernel.org # v4.14+
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Hardik Gajjar <hgajjar@de.adit-jv.com>
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200514220246.13290-1-erosca@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add control message quirk delay for Kingston HyperX headset

commit 073919e09ca445d4486968e3f851372ff44cf2b5 upstream.

Kingston HyperX headset with 0951:16ad also needs the same quirk for
delaying the frequency controls.

Signed-off-by: Jesus Ramos <jesus-ramos@live.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/BY5PR19MB3634BA68C7CCA23D8DF428E796AF0@BY5PR19MB3634.namprd19.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: rawmidi: Fix racy buffer resize under concurrent accesses

commit c1f6e3c818dd734c30f6a7eeebf232ba2cf3181d upstream.

The rawmidi core allows user to resize the runtime buffer via ioctl,
and this may lead to UAF when performed during concurrent reads or
writes: the read/write functions unlock the runtime lock temporarily
during copying form/to user-space, and that's the race window.

This patch fixes the hole by introducing a reference counter for the
runtime buffer read/write access and returns -EBUSY error when the
resize is performed concurrently against read/write.

Note that the ref count field is a simple integer instead of
refcount_t here, since the all contexts accessing the buffer is
basically protected with a spinlock, hence we need no expensive atomic
ops.  Also, note that this busy check is needed only against read /
write functions, and not in receive/transmit callbacks; the race can
happen only at the spinlock hole mentioned in the above, while the
whole function is protected for receive / transmit callbacks.

Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAFcO6XMWpUVK_yzzCpp8_XP7+=oUpQvuBeCbMffEDkpe8jWrfg@mail.gmail.com
Link: https://lore.kernel.org/r/s5heerw3r5z.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Add COEF workaround for ASUS ZenBook UX431DA

commit 1b94e59d30afecf18254ad413e953e7587645a20 upstream.

ASUS ZenBook UX431DA requires an additional COEF setup when booted
from the recent Windows 10, otherwise it produces the noisy output.
The quirk turns on COEF 0x1b bit 10 that has been cleared supposedly
due to the pop noise reduction.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207553
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200512073203.14091-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Limit int mic boost for Thinkpad T530

commit b590b38ca305d6d7902ec7c4f7e273e0069f3bcc upstream.

Lenovo Thinkpad T530 seems to have a sensitive internal mic capture
that needs to limit the mic boost like a few other Thinkpad models.
Although we may change the quirk for ALC269_FIXUP_LENOVO_DOCK, this
hits way too many other laptop models, so let's add a new fixup model
that limits the internal mic boost on top of the existing quirk and
apply to only T530.

BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1171293
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200514160533.10337-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: usbfs: fix mmap dma mismatch

commit a0e710a7def471b8eb779ff551fc27701da49599 upstream.

In commit 2bef9aed6f0e ("usb: usbfs: correct kernel->user page attribute
mismatch") we switched from always calling remap_pfn_range() to call
dma_mmap_coherent() to handle issues with systems with non-coherent USB host
controller drivers.  Unfortunatly, as syzbot quickly told us, not all the world
is host controllers with DMA support, so we need to check what host controller
we are attempting to talk to before doing this type of allocation.

Thanks to Christoph for the quick idea of how to fix this.

Fixes: 2bef9aed6f0e ("usb: usbfs: correct kernel->user page attribute mismatch")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot+353be47c9ce21b68b7ed@syzkaller.appspotmail.com
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20200514112711.1858252-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: usbfs: correct kernel->user page attribute mismatch

commit 2bef9aed6f0e22391c8d4570749b1acc9bc3981e upstream.

On some architectures (e.g. arm64) requests for
IO coherent memory may use non-cachable attributes if
the relevant device isn't cache coherent. If these
pages are then remapped into userspace as cacheable,
they may not be coherent with the non-cacheable mappings.

In particular this happens with libusb, when it attempts
to create zero-copy buffers for use by rtl-sdr
(https://github.com/osmocom/rtl-sdr/). On low end arm
devices with non-coherent USB ports, the application will
be unexpectedly killed, while continuing to work fine on
arm machines with coherent USB controllers.

This bug has been discovered/reported a few times over
the last few years. In the case of rtl-sdr a compile time
option to enable/disable zero copy was implemented to
work around it.

Rather than relaying on application specific workarounds,
dma_mmap_coherent() can be used instead of remap_pfn_range().
The page cache/etc attributes will then be correctly set in
userspace to match the kernel mapping.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200504201348.1183246-1-jeremy.linton@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcc-10: avoid shadowing standard library 'free()' in crypto

commit 1a263ae60b04de959d9ce9caea4889385eefcc7b upstream.

gcc-10 has started warning about conflicting types for a few new
built-in functions, particularly 'free()'.

This results in warnings like:

   crypto/xts.c:325:13: warning: conflicting types for built-in function ‘free’; expected ‘void(void *)’ [-Wbuiltin-declaration-mismatch]

because the crypto layer had its local freeing functions called
'free()'.

Gcc-10 is in the wrong here, since that function is marked 'static', and
thus there is no chance of confusion with any standard library function
namespace.

But the simplest thing to do is to just use a different name here, and
avoid this gcc mis-feature.

[ Side note: gcc knowing about 'free()' is in itself not the
  mis-feature: the semantics of 'free()' are special enough that a
  compiler can validly do special things when seeing it.

  So the mis-feature here is that gcc thinks that 'free()' is some
  restricted name, and you can't shadow it as a local static function.

  Making the special 'free()' semantics be a function attribute rather
  than tied to the name would be the much better model ]

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcc-10: mark more functions __init to avoid section mismatch warnings

commit e99332e7b4cda6e60f5b5916cf9943a79dbef902 upstream.

It seems that for whatever reason, gcc-10 ends up not inlining a couple
of functions that used to be inlined before.  Even if they only have one
single callsite - it looks like gcc may have decided that the code was
unlikely, and not worth inlining.

The code generation difference is harmless, but caused a few new section
mismatch errors, since the (now no longer inlined) function wasn't in
the __init section, but called other init functions:

   Section mismatch in reference from the function kexec_free_initrd() to the function .init.text:free_initrd_mem()
   Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memremap()
   Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memunmap()

So add the appropriate __init annotation to make modpost not complain.
In both cases there were trivially just a single callsite from another
__init function.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcc-10 warnings: fix low-hanging fruit

commit 9d82973e032e246ff5663c9805fbb5407ae932e3 upstream.

Due to a bug-report that was compiler-dependent, I updated one of my
machines to gcc-10.  That shows a lot of new warnings.  Happily they
seem to be mostly the valid kind, but it's going to cause a round of
churn for getting rid of them..

This is the really low-hanging fruit of removing a couple of zero-sized
arrays in some core code.  We have had a round of these patches before,
and we'll have many more coming, and there is nothing special about
these except that they were particularly trivial, and triggered more
warnings than most.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcc-10: disable 'restrict' warning for now

commit adc71920969870dfa54e8f40dac8616284832d02 upstream.

gcc-10 now warns about passing aliasing pointers to functions that take
restricted pointers.

That's actually a great warning, and if we ever start using 'restrict'
in the kernel, it might be quite useful.  But right now we don't, and it
turns out that the only thing this warns about is an idiom where we have
declared a few functions to be "printf-like" (which seems to make gcc
pick up the restricted pointer thing), and then we print to the same
buffer that we also use as an input.

And people do that as an odd concatenation pattern, with code like this:

    #define sysfs_show_gen_prop(buffer, fmt, ...) \
        snprintf(buffer, PAGE_SIZE, "%s"fmt, buffer, __VA_ARGS__)

where we have 'buffer' as both the destination of the final result, and
as the initial argument.

Yes, it's a bit questionable.  And outside of the kernel, people do have
standard declarations like

    int snprintf( char *restrict buffer, size_t bufsz,
                  const char *restrict format, ... );

where that output buffer is marked as a restrict pointer that cannot
alias with any other arguments.

But in the context of the kernel, that 'use snprintf() to concatenate to
the end result' does work, and the pattern shows up in multiple places.
And we have not marked our own version of snprintf() as taking restrict
pointers, so the warning is incorrect for now, and gcc picks it up on
its own.

If we do start using 'restrict' in the kernel (and it might be a good
idea if people find places where it matters), we'll need to figure out
how to avoid this issue for snprintf and friends.  But in the meantime,
this warning is not useful.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcc-10: disable 'stringop-overflow' warning for now

commit 5a76021c2eff7fcf2f0918a08fd8a37ce7922921 upstream.

This is the final array bounds warning removal for gcc-10 for now.

Again, the warning is good, and we should re-enable all these warnings
when we have converted all the legacy array declaration cases to
flexible arrays. But in the meantime, it's just noise.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcc-10: disable 'array-bounds' warning for now

commit 44720996e2d79e47d508b0abe99b931a726a3197 upstream.

This is another fine warning, related to the 'zero-length-bounds' one,
but hitting the same historical code in the kernel.

Because C didn't historically support flexible array members, we have
code that instead uses a one-sized array, the same way we have cases of
zero-sized arrays.

The one-sized arrays come from either not wanting to use the gcc
zero-sized array extension, or from a slight convenience-feature, where
particularly for strings, the size of the structure now includes the
allocation for the final NUL character.

So with a "char name[1];" at the end of a structure, you can do things
like

       v = my_malloc(sizeof(struct vendor) + strlen(name));

and avoid the "+1" for the terminator.

Yes, the modern way to do that is with a flexible array, and using
'offsetof()' instead of 'sizeof()', and adding the "+1" by hand.  That
also technically gets the size "more correct" in that it avoids any
alignment (and thus padding) issues, but this is another long-term
cleanup thing that will not happen for 5.7.

So disable the warning for now, even though it's potentially quite
useful.  Having a slew of warnings that then hide more urgent new issues
is not an improvement.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcc-10: disable 'zero-length-bounds' warning for now

commit 5c45de21a2223fe46cf9488c99a7fbcf01527670 upstream.

This is a fine warning, but we still have a number of zero-length arrays
in the kernel that come from the traditional gcc extension.  Yes, they
are getting converted to flexible arrays, but in the meantime the gcc-10
warning about zero-length bounds is very verbose, and is hiding other
issues.

I missed one actual build failure because it was hidden among hundreds
of lines of warning.  Thankfully I caught it on the second go before
pushing things out, but it convinced me that I really need to disable
the new warnings for now.

We'll hopefully be all done with our conversion to flexible arrays in
the not too distant future, and we can then re-enable this warning.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Stop the ad-hoc games with -Wno-maybe-initialized

commit 78a5255ffb6a1af189a83e493d916ba1c54d8c75 upstream.

We have some rather random rules about when we accept the
"maybe-initialized" warnings, and when we don't.

For example, we consider it unreliable for gcc versions < 4.9, but also
if -O3 is enabled, or if optimizing for size.  And then various kernel
config options disabled it, because they know that they trigger that
warning by confusing gcc sufficiently (ie PROFILE_ALL_BRANCHES).

And now gcc-10 seems to be introducing a lot of those warnings too, so
it falls under the same heading as 4.9 did.

At the same time, we have a very straightforward way to _enable_ that
warning when wanted: use "W=2" to enable more warnings.

So stop playing these ad-hoc games, and just disable that warning by
default, with the known and straight-forward "if you want to work on the
extra compiler warnings, use W=123".

Would it be great to have code that is always so obvious that it never
confuses the compiler whether a variable is used initialized or not?
Yes, it would.  In a perfect world, the compilers would be smarter, and
our source code would be simpler.

That's currently not the world we live in, though.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/rds: Use ERR_PTR for rds_message_alloc_sgs()

commit 7dba92037baf3fa00b4880a31fd532542264994c upstream.

Returning the error code via a 'int *ret' when the function returns a
pointer is very un-kernely and causes gcc 10's static analysis to choke:

net/rds/message.c: In function ‘rds_message_map_pages’:
net/rds/message.c:358:10: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  358 |   return ERR_PTR(ret);

Use a typical ERR_PTR return instead.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pnp: Use list_for_each_entry() instead of open coding

commit 01b2bafe57b19d9119413f138765ef57990921ce upstream.

Aside from good practice, this avoids a warning from gcc 10:

./include/linux/kernel.h:997:3: warning: array subscript -31 is outside array bounds of ‘struct list_head[1]’ [-Warray-bounds]
  997 |  ((type *)(__mptr - offsetof(type, member))); })
      |  ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/list.h:493:2: note: in expansion of macro ‘container_of’
  493 |  container_of(ptr, type, member)
      |  ^~~~~~~~~~~~
./include/linux/pnp.h:275:30: note: in expansion of macro ‘list_entry’
  275 | #define global_to_pnp_dev(n) list_entry(n, struct pnp_dev, global_list)
      |                              ^~~~~~~~~~
./include/linux/pnp.h:281:11: note: in expansion of macro ‘global_to_pnp_dev’
  281 |  (dev) != global_to_pnp_dev(&pnp_global); \
      |           ^~~~~~~~~~~~~~~~~
arch/x86/kernel/rtc.c:189:2: note: in expansion of macro ‘pnp_for_each_dev’
  189 |  pnp_for_each_dev(dev) {

Because the common code doesn't cast the starting list_head to the
containing struct.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
[ rjw: Whitespace adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv3: fix rpc receive buffer size for MOUNT call

[ Upstream commit 8eed292bc8cbf737e46fb1c119d4c8f6dcb00650 ]

Prior to commit e3d3ab64dd66 ("SUNRPC: Use au_rslack when
computing reply buffer size"), there was enough slack in the reply
buffer to commodate filehandles of size 60bytes. However, the real
problem was that the reply buffer size for the MOUNT operation was
not correctly calculated. Received buffer size used the filehandle
size for NFSv2 (32bytes) which is much smaller than the allowed
filehandle size for the v3 mounts.

Fix the reply buffer size (decode arguments size) for the MNT command.

Fixes: 2c94b8eca1a2 ("SUNRPC: Use au_rslack when computing reply buffer size")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm, memcg: fix inconsistent oom event behavior

[ Upstream commit 04fd61a4e01028210a91f0efc408c8bc61a3018c ]

A recent commit 9852ae3fe529 ("mm, memcg: consider subtrees in
memory.events") changed the behavior of memcg events, which will now
consider subtrees in memory.events.

But oom_kill event is a special one as it is used in both cgroup1 and
cgroup2.  In cgroup1, it is displayed in memory.oom_control.  The file
memory.oom_control is in both root memcg and non root memcg, that is
different with memory.event as it only in non-root memcg.  That commit
is okay for cgroup2, but it is not okay for cgroup1 as it will cause
inconsistent behavior between root memcg and non-root memcg.

Here's an example on why this behavior is inconsistent in cgroup1.

       root memcg
       /
    memcg foo
     /
  memcg bar

Suppose there's an oom_kill in memcg bar, then the oon_kill will be

       root memcg : memory.oom_control(oom_kill)  0
       /
    memcg foo : memory.oom_control(oom_kill)  1
     /
  memcg bar : memory.oom_control(oom_kill)  1

For the non-root memcg, its memory.oom_control(oom_kill) includes its
descendants' oom_kill, but for root memcg, it doesn't include its
descendants' oom_kill.  That means, memory.oom_control(oom_kill) has
different meanings in different memcgs.  That is inconsistent.  Then the
user has to know whether the memcg is root or not.

If we can't fully support it in cgroup1, for example by adding
memory.events.local into cgroup1 as well, then let's don't touch its
original behavior.

Fixes: 9852ae3fe529 ("mm, memcg: consider subtrees in memory.events")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200502141055.7378-1-laoar.shao@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/ism: fix error return code in ism_probe()

[ Upstream commit 29b74cb75e3572d83708745e81e24d37837415f9 ]

Fix to return negative error code -ENOMEM from the smcd_alloc_dev()
error handling case instead of 0, as done elsewhere in this function.

Fixes: 684b89bc39ce ("s390/ism: add device driver for internal shared memory")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (da9052) Synchronize access with mfd

[ Upstream commit 333e22db228f0bd0c839553015a6a8d3db4ba569 ]

When tsi-as-adc is configured it is possible for in7[0123]_input read to
return an incorrect value if a concurrent read to in[456]_input is
performed. This is caused by a concurrent manipulation of the mux
channel without proper locking as hwmon and mfd use different locks for
synchronization.

Switch hwmon to use the same lock as mfd when accessing the TSI channel.

Fixes: 4f16cab19a3d5 ("hwmon: da9052: Add support for TSI channel")
Signed-off-by: Samu Nuutamo <samu.nuutamo@vincit.fi>
[rebase to current master, reword commit message slightly]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/iw_cxgb4: Fix incorrect function parameters

[ Upstream commit c8b1f340e54158662acfa41d6dee274846370282 ]

While reading the TCB field in t4_tcb_get_field32() the wrong mask is
passed as a parameter which leads the driver eventually to a kernel
panic/app segfault from access to an illegal SRQ index while flushing the
SRQ completions during connection teardown.

Fixes: 11a27e2121a5 ("iw_cxgb4: complete the cached SRQ buffers")
Link: https://lore.kernel.org/r/20200511185608.5202-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/core: Fix double put of resource

[ Upstream commit 50bbe3d34fea74b7c0fabe553c40c2f4a48bb9c3 ]

Do not decrease the reference count of resource tracker object twice in
the error flow of res_get_common_doit.

Fixes: c5dfe0ea6ffa ("RDMA/nldev: Add resource tracker doit callback")
Link: https://lore.kernel.org/r/20200507062942.98305-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/core: Fix potential NULL pointer dereference in pkey cache

[ Upstream commit 1901b91f99821955eac2bd48fe25ee983385dc00 ]

The IB core pkey cache is populated by procedure ib_cache_update().
Initially, the pkey cache pointer is NULL. ib_cache_update allocates a
buffer and populates it with the device's pkeys, via repeated calls to
procedure ib_query_pkey().

If there is a failure in populating the pkey buffer via ib_query_pkey(),
ib_cache_update does not replace the old pkey buffer cache with the
updated one -- it leaves the old cache as is.

Since initially the pkey buffer cache is NULL, when calling
ib_cache_update the first time, a failure in ib_query_pkey() will cause
the pkey buffer cache pointer to remain NULL.

In this situation, any calls subsequent to ib_get_cached_pkey(),
ib_find_cached_pkey(), or ib_find_cached_pkey_exact() will try to
dereference the NULL pkey cache pointer, causing a kernel panic.

Fix this by checking the ib_cache_update() return value.

Fixes: 8faea9fd4a39 ("RDMA/cache: Move the cache per-port data into the main ib_port_data")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/20200507071012.100594-1-leon@kernel.org
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/mlx4: Test return value of calls to ib_get_cached_pkey

[ Upstream commit 6693ca95bd4330a0ad7326967e1f9bcedd6b0800 ]

In the mlx4_ib_post_send() flow, some functions call ib_get_cached_pkey()
without checking its return value. If ib_get_cached_pkey() returns an
error code, these functions should return failure.

Fixes: 1ffeb2eb8be9 ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support")
Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters")
Fixes: e622f2f4ad21 ("IB: split struct ib_send_wr")
Link: https://lore.kernel.org/r/20200426075921.130074-1-leon@kernel.org
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Always return ERR_PTR from rxe_create_mmap_info()

[ Upstream commit bb43c8e382e5da0ee253e3105d4099820ff4d922 ]

The commit below modified rxe_create_mmap_info() to return ERR_PTR's but
didn't update the callers to handle them. Modify rxe_create_mmap_info() to
only return ERR_PTR and fix all error checking after
rxe_create_mmap_info() is called.

Ensure that all other exit paths properly set the error return.

Fixes: ff23dfa13457 ("IB: Pass only ib_udata in function prototypes")
Link: https://lore.kernel.org/r/20200425233545.17210-1-sudipm.mukherjee@gmail.com
Link: https://lore.kernel.org/r/20200511183742.GB225608@mwanda
Cc: stable@vger.kernel.org [5.4+]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_set_rbtree: Add missing expired checks

[ Upstream commit 340eaff651160234bdbce07ef34b92a8e45cd540 ]

Expired intervals would still match and be dumped to user space until
garbage collection wiped them out. Make sure they stop matching and
disappear (from users' perspective) as soon as they expire.

Fixes: 8d8540c4f5e03 ("netfilter: nft_set_rbtree: add timeout support")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_set_rbtree: Introduce and use nft_rbtree_interval_start()

[ Upstream commit 6f7c9caf017be8ab0fe3b99509580d0793bf0833 ]

Replace negations of nft_rbtree_interval_end() with a new helper,
nft_rbtree_interval_start(), wherever this helps to visualise the
problem at hand, that is, for all the occurrences except for the
comparison against given flags in __nft_rbtree_get().

This gets especially useful in the next patch.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Signalled ASYNC tasks need to exit

[ Upstream commit ce99aa62e1eb793e259d023c7f6ccb7c4879917b ]

Ensure that signalled ASYNC rpc_tasks exit immediately instead of
spinning until a timeout (or forever).

To avoid checking for the signal flag on every scheduler iteration,
the check is instead introduced in the client's finite state
machine.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Fixes: ae67bd3821bb ("SUNRPC: Fix up task signalling")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfs: fix NULL deference in nfs4_get_valid_delegation

[ Upstream commit 29fe839976266bc7c55b927360a1daae57477723 ]

We add the new state to the nfsi->open_states list, making it
potentially visible to other threads, before we've finished initializing
it.

That wasn't a problem when all the readers were also taking the i_lock
(as we do here), but since we switched to RCU, there's now a possibility
that a reader could see the partially initialized state.

Symptoms observed were a crash when another thread called
nfs4_get_valid_delegation() on a NULL inode, resulting in an oops like:

BUG: unable to handle page fault for address: ffffffffffffffb0 ...
RIP: 0010:nfs4_get_valid_delegation+0x6/0x30 [nfsv4] ...
Call Trace:
 nfs4_open_prepare+0x80/0x1c0 [nfsv4]
 __rpc_execute+0x75/0x390 [sunrpc]
 ? finish_task_switch+0x75/0x260
 rpc_async_schedule+0x29/0x40 [sunrpc]
 process_one_work+0x1ad/0x370
 worker_thread+0x30/0x390
 ? create_worker+0x1a0/0x1a0
 kthread+0x10c/0x130
 ? kthread_park+0x80/0x80
 ret_from_fork+0x22/0x30

Fixes: 9ae075fdd190 "NFSv4: Convert open state lookup to use RCU"
Reviewed-by: Seiichi Ikarashi <s.ikarashi@fujitsu.com>
Tested-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: fix the flush_icache_range arguments in machine_kexec

[ Upstream commit d51c214541c5154dda3037289ee895ea3ded5ebd ]

The second argument is the end "pointer", not the length.

Fixes: d28f6df1305a ("arm64/kexec: Add core kexec support")
Cc: <stable@vger.kernel.org> # 4.8.x-
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/gvt: Fix kernel oops for 3-level ppgtt guest

[ Upstream commit 72a7a9925e2beea09b109dffb3384c9bf920d9da ]

As i915 won't allocate extra PDP for current default PML4 table,
so for 3-level ppgtt guest, we would hit kernel pointer access
failure on extra PDP pointers. So this trys to bypass that now.
It won't impact real shadow PPGTT setup, so guest context still
works.

This is verified on 4.15 guest kernel with i915.enable_ppgtt=1
to force on old aliasing ppgtt behavior.

Fixes: 4f15665ccbba ("drm/i915: Add ppgtt to GVT GEM context")
Reviewed-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200506095918.124913-1-zhenyuw@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: conntrack: avoid gcc-10 zero-length-bounds warning

[ Upstream commit 2c407aca64977ede9b9f35158e919773cae2082f ]

gcc-10 warns around a suspicious access to an empty struct member:

net/netfilter/nf_conntrack_core.c: In function '__nf_conntrack_alloc':
net/netfilter/nf_conntrack_core.c:1522:9: warning: array subscript 0 is outside the bounds of an interior zero-length array 'u8[0]' {aka 'unsigned char[0]'} [-Wzero-length-bounds]
 1522 |  memset(&ct->__nfct_init_offset[0], 0,
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from net/netfilter/nf_conntrack_core.c:37:
include/net/netfilter/nf_conntrack.h:90:5: note: while referencing '__nfct_init_offset'
   90 |  u8 __nfct_init_offset[0];
      |     ^~~~~~~~~~~~~~~~~~

The code is correct but a bit unusual. Rework it slightly in a way that
does not trigger the warning, using an empty struct instead of an empty
array. There are probably more elegant ways to do this, but this is the
smallest change.

Fixes: c41884ce0562 ("netfilter: conntrack: avoid zeroing timer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4: Fix fscache cookie aux_data to ensure change_attr is included

[ Upstream commit 50eaa652b54df1e2b48dc398d9e6114c9ed080eb ]

Commit 402cb8dda949 ("fscache: Attach the index key and aux data to
the cookie") added the aux_data and aux_data_len to parameters to
fscache_acquire_cookie(), and updated the callers in the NFS client.
In the process it modified the aux_data to include the change_attr,
but missed adding change_attr to a couple places where aux_data was
used.  Specifically, when opening a file and the change_attr is not
added, the following attempt to lookup an object will fail inside
cachefiles_check_object_xattr() = -116 due to
nfs_fscache_inode_check_aux() failing memcmp on auxdata and returning
FSCACHE_CHECKAUX_OBSOLETE.

Fix this by adding nfs_fscache_update_auxdata() to set the auxdata
from all relevant fields in the inode, including the change_attr.

Fixes: 402cb8dda949 ("fscache: Attach the index key and aux data to the cookie")
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfs: fscache: use timespec64 in inode auxdata

[ Upstream commit 6e31ded6895adfca97211118cc9b72236e8f6d53 ]

nfs currently behaves differently on 32-bit and 64-bit kernels regarding
the on-disk format of nfs_fscache_inode_auxdata.

That format should really be the same on any kernel, and we should avoid
the 'timespec' type in order to remove that from the kernel later on.

Using plain 'timespec64' would not be good here, since that includes
implied padding and would possibly leak kernel stack data to the on-disk
format on 32-bit architectures.

struct __kernel_timespec would work as a replacement, but open-coding
the two struct members in nfs_fscache_inode_auxdata makes it more
obvious what's going on here, and keeps the current format for 64-bit
architectures.

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: Fix fscache super_cookie index_key from changing after umount

[ Upstream commit d9bfced1fbcb35b28d8fbed4e785d2807055ed2b ]

Commit 402cb8dda949 ("fscache: Attach the index key and aux data to
the cookie") added the index_key and index_key_len parameters to
fscache_acquire_cookie(), and updated the callers in the NFS client.
One of the callers was inside nfs_fscache_get_super_cookie()
and was changed to use the full struct nfs_fscache_key as the
index_key.  However, a couple members of this structure contain
pointers and thus will change each time the same NFS share is
remounted.  Since index_key is used for fscache_cookie->key_hash
and this subsequently is used to compare cookies, the effectiveness
of fscache with NFS is reduced to the point at which a umount
occurs.   Any subsequent remount of the same share will cause a
unique NFS super_block index_key and key_hash to be generated for
the same data, rendering any prior fscache data unable to be
found.  A simple reproducer demonstrates the problem.

1. Mount share with 'fsc', create a file, drop page cache
systemctl start cachefilesd
mount -o vers=3,fsc 127.0.0.1:/export /mnt
dd if=/dev/zero of=/mnt/file1.bin bs=4096 count=1
echo 3 > /proc/sys/vm/drop_caches

2. Read file into page cache and fscache, then unmount
dd if=/mnt/file1.bin of=/dev/null bs=4096 count=1
umount /mnt

3. Remount and re-read which should come from fscache
mount -o vers=3,fsc 127.0.0.1:/export /mnt
echo 3 > /proc/sys/vm/drop_caches
dd if=/mnt/file1.bin of=/dev/null bs=4096 count=1

4. Check for READ ops in mountstats - there should be none
grep READ: /proc/self/mountstats

Looking at the history and the removed function, nfs_super_get_key(),
we should only use nfs_fscache_key.key plus any uniquifier, for
the fscache index_key.

Fixes: 402cb8dda949 ("fscache: Attach the index key and aux data to the cookie")
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: force fbdev into vram

[ Upstream commit a6aacb2b26e85aa619cf0c6f98d0ca77314cd2a1 ]

We set the fb smem pointer to the offset into the BAR, so keep
the fbdev bo in vram.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=207581
Fixes: 6c8d74caa2fa33 ("drm/amdgpu: Enable scatter gather display support")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

fork: prevent accidental access to clone3 features

[ Upstream commit 3f2c788a13143620c5471ac96ac4f033fc9ac3f3 ]

Jan reported an issue where an interaction between sign-extending clone's
flag argument on ppc64le and the new CLONE_INTO_CGROUP feature causes
clone() to consistently fail with EBADF.

The whole story is a little longer. The legacy clone() syscall is odd in a
bunch of ways and here two things interact. First, legacy clone's flag
argument is word-size dependent, i.e. it's an unsigned long whereas most
system calls with flag arguments use int or unsigned int. Second, legacy
clone() ignores unknown and deprecated flags. The two of them taken
together means that users on 64bit systems can pass garbage for the upper
32bit of the clone() syscall since forever and things would just work fine.
Just try this on a 64bit kernel prior to v5.7-rc1 where this will succeed
and on v5.7-rc1 where this will fail with EBADF:

int main(int argc, char *argv[])
{
        pid_t pid;

        /* Note that legacy clone() has different argument ordering on
         * different architectures so this won't work everywhere.
         *
         * Only set the upper 32 bits.
         */
        pid = syscall(__NR_clone, 0xffffffff00000000 | SIGCHLD,
                      NULL, NULL, NULL, NULL);
        if (pid < 0)
                exit(EXIT_FAILURE);
        if (pid == 0)
                exit(EXIT_SUCCESS);
        if (wait(NULL) != pid)
                exit(EXIT_FAILURE);

        exit(EXIT_SUCCESS);
}

Since legacy clone() couldn't be extended this was not a problem so far and
nobody really noticed or cared since nothing in the kernel ever bothered to
look at the upper 32 bits.

But once we introduced clone3() and expanded the flag argument in struct
clone_args to 64 bit we opened this can of worms. With the first flag-based
extension to clone3() making use of the upper 32 bits of the flag argument
we've effectively made it possible for the legacy clone() syscall to reach
clone3() only flags. The sign extension scenario is just the odd
corner-case that we needed to figure this out.

The reason we just realized this now and not already when we introduced
CLONE_CLEAR_SIGHAND was that CLONE_INTO_CGROUP assumes that a valid cgroup
file descriptor has been given. So the sign extension (or the user
accidently passing garbage for the upper 32 bits) caused the
CLONE_INTO_CGROUP bit to be raised and the kernel to error out when it
didn't find a valid cgroup file descriptor.

Let's fix this by always capping the upper 32 bits for all codepaths that
are not aware of clone3() features. This ensures that we can't reach
clone3() only features by accident via legacy clone as with the sign
extension case and also that legacy clone() works exactly like before, i.e.
ignoring any unknown flags.  This solution risks no regressions and is also
pretty clean.

Fixes: 7f192e3cd316 ("fork: add clone3")
Fixes: ef2c41cf38a7 ("clone3: allow spawning processes into cgroups")
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dmitry V. Levin <ldv@altlinux.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Florian Weimer <fw@deneb.enyo.de>
Cc: libc-alpha@sourceware.org
Cc: stable@vger.kernel.org # 5.3+
Link: https://sourceware.org/pipermail/libc-alpha/2020-May/113596.html
Link: https://lore.kernel.org/r/20200507103214.77218-1-christian.brauner@ubuntu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: More gfs2_find_jhead fixes

[ Upstream commit aa83da7f47b26c9587bade6c4bc4736ffa308f0a ]

It turns out that when extending an existing bio, gfs2_find_jhead fails to
check if the block number is consecutive, which leads to incorrect reads for
fragmented journals.

In addition, limit the maximum bio size to an arbitrary value of 2 megabytes:
since commit 07173c3ec276 ("block: enable multipage bvecs"), if we just keep
adding pages until bio_add_page fails, bios will grow much larger than useful,
which pins more memory than necessary with barely any additional performance
gains.

Fixes: f4686c26ecc3 ("gfs2: read journal in large chunks")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: block: Fix request completion in the CQE timeout path

[ Upstream commit c077dc5e0620508a29497dac63a2822324ece52a ]

First, it should be noted that the CQE timeout (60 seconds) is substantial
so a CQE request that times out is really stuck, and the race between
timeout and completion is extremely unlikely. Nevertheless this patch
fixes an issue with it.

Commit ad73d6feadbd7b ("mmc: complete requests from ->timeout")
preserved the existing functionality, to complete the request.
However that had only been necessary because the block layer
timeout handler had been marking the request to prevent it from being
completed normally. That restriction was removed at the same time, the
result being that a request that has gone will have been completed anyway.
That is, the completion was unnecessary.

At the time, the unnecessary completion was harmless because the block
layer would ignore it, although that changed in kernel v5.0.

Note for stable, this patch will not apply cleanly without patch "mmc:
core: Fix recursive locking issue in CQE recovery path"

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: ad73d6feadbd7b ("mmc: complete requests from ->timeout")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200508062227.23144-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: core: Fix recursive locking issue in CQE recovery path

[ Upstream commit 39a22f73744d5baee30b5f134ae2e30b668b66ed ]

Consider the following stack trace

-001|raw_spin_lock_irqsave
-002|mmc_blk_cqe_complete_rq
-003|__blk_mq_complete_request(inline)
-003|blk_mq_complete_request(rq)
-004|mmc_cqe_timed_out(inline)
-004|mmc_mq_timed_out

mmc_mq_timed_out acquires the queue_lock for the first
time. The mmc_blk_cqe_complete_rq function also tries to acquire
the same queue lock resulting in recursive locking where the task
is spinning for the same lock which it has already acquired leading
to watchdog bark.

Fix this issue with the lock only for the required critical section.

Cc: <stable@vger.kernel.org>
Fixes: 1e8e55b67030 ("mmc: block: Add CQE support")
Suggested-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Sarthak Garg <sartgarg@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1588868135-31783-1-git-send-email-vbadigan@codeaurora.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: core: Check request type before completing the request

[ Upstream commit e6bfb1bf00852b55f4c771f47ae67004c04d3c87 ]

In the request completion path with CQE, request type is being checked
after the request is getting completed. This is resulting in returning
the wrong request type and leading to the IO hang issue.

ASYNC request type is getting returned for DCMD type requests.
Because of this mismatch, mq->cqe_busy flag is never getting cleared
and the driver is not invoking blk_mq_hw_run_queue. So requests are not
getting dispatched to the LLD from the block layer.

All these eventually leading to IO hang issues.
So, get the request type before completing the request.

Cc: <stable@vger.kernel.org>
Fixes: 1e8e55b67030 ("mmc: block: Add CQE support")
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1588775643-18037-2-git-send-email-vbadigan@codeaurora.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci-pci-gli: Fix can not access GL9750 after reboot from Windows 10

[ Upstream commit b56ff195c317ad28c05d354aeecbb9995b8e08c1 ]

Need to clear some bits in a vendor-defined register after reboot from
Windows 10.

Fixes: e51df6ce668a ("mmc: host: sdhci-pci: Add Genesys Logic GL975x support")
Reported-by: Grzegorz Kowal <custos.mentis@gmail.com>
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Grzegorz Kowal <custos.mentis@gmail.com>
Link: https://lore.kernel.org/r/20200504063957.6638-1-benchuanggli@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: alcor: Fix a resource leak in the error path for ->probe()

[ Upstream commit 7c277dd2b0ff6a16f1732a66c2c52a29f067163e ]

If devm_request_threaded_irq() fails, the allocated struct mmc_host needs
to be freed via calling mmc_free_host(), so let's do that.

Fixes: c5413ad815a6 ("mmc: add new Alcor Micro Cardreader SD/MMC driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20200426202355.43055-1-christophe.jaillet@wanadoo.fr
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, sockmap: bpf_tcp_ingress needs to subtract bytes from sg.size

[ Upstream commit 81aabbb9fb7b4b1efd073b62f0505d3adad442f3 ]

In bpf_tcp_ingress we used apply_bytes to subtract bytes from sg.size
which is used to track total bytes in a message. But this is not
correct because apply_bytes is itself modified in the main loop doing
the mem_charge.

Then at the end of this we have sg.size incorrectly set and out of
sync with actual sk values. Then we can get a splat if we try to
cork the data later and again try to redirect the msg to ingress. To
fix instead of trying to track msg.size do the easy thing and include
it as part of the sk_msg_xfer logic so that when the msg is moved the
sg.size is always correct.

To reproduce the below users will need ingress + cork and hit an
error path that will then try to 'free' the skmsg.

[  173.699981] BUG: KASAN: null-ptr-deref in sk_msg_free_elem+0xdd/0x120
[  173.699987] Read of size 8 at addr 0000000000000008 by task test_sockmap/5317

[  173.700000] CPU: 2 PID: 5317 Comm: test_sockmap Tainted: G          I       5.7.0-rc1+ #43
[  173.700005] Hardware name: Dell Inc. Precision 5820 Tower/002KVM, BIOS 1.9.2 01/24/2019
[  173.700009] Call Trace:
[  173.700021]  dump_stack+0x8e/0xcb
[  173.700029]  ? sk_msg_free_elem+0xdd/0x120
[  173.700034]  ? sk_msg_free_elem+0xdd/0x120
[  173.700042]  __kasan_report+0x102/0x15f
[  173.700052]  ? sk_msg_free_elem+0xdd/0x120
[  173.700060]  kasan_report+0x32/0x50
[  173.700070]  sk_msg_free_elem+0xdd/0x120
[  173.700080]  __sk_msg_free+0x87/0x150
[  173.700094]  tcp_bpf_send_verdict+0x179/0x4f0
[  173.700109]  tcp_bpf_sendpage+0x3ce/0x5d0

Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/158861290407.14306.5327773422227552482.stgit@john-Precision-5820-Tower
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, sockmap: msg_pop_data can incorrecty set an sge length

[ Upstream commit 3e104c23816220919ea1b3fd93fabe363c67c484 ]

When sk_msg_pop() is called where the pop operation is working on
the end of a sge element and there is no additional trailing data
and there _is_ data in front of pop, like the following case,

   |____________a_____________|__pop__|

We have out of order operations where we incorrectly set the pop
variable so that instead of zero'ing pop we incorrectly leave it
untouched, effectively. This can cause later logic to shift the
buffers around believing it should pop extra space. The result is
we have 'popped' more data then we expected potentially breaking
program logic.

It took us a while to hit this case because typically we pop headers
which seem to rarely be at the end of a scatterlist elements but
we can't rely on this.

Fixes: 7246d8ed4dcce ("bpf: helper to pop data from messages")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/158861288359.14306.7654891716919968144.stgit@john-Precision-5820-Tower
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915: Don't enable WaIncreaseLatencyIPCEnabled when IPC is disabled

[ Upstream commit 421abe200321a2c907ede1a6208c558284ba0b75 ]

In commit 5a7d202b1574, a logical AND was erroneously changed to an OR,
causing WaIncreaseLatencyIPCEnabled to be enabled unconditionally for
kabylake and coffeelake, even when IPC is disabled. Fix the logic so
that WaIncreaseLatencyIPCEnabled is only used when IPC is enabled.

Fixes: 5a7d202b1574 ("drm/i915: Drop WaIncreaseLatencyIPCEnabled/1140 for cnl")
Cc: stable@vger.kernel.org # 5.3.x+
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430214654.51314-1-sultan@kerneltoast.com
(cherry picked from commit 690d22dafa88b82453516387b475664047a6bd14)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40iw: Fix error handling in i40iw_manage_arp_cache()

[ Upstream commit 37e31d2d26a4124506c24e95434e9baf3405a23a ]

The i40iw_arp_table() function can return -EOVERFLOW if
i40iw_alloc_resource() fails so we can't just test for "== -1".

Fixes: 4e9042e647ff ("i40iw: add hw and utils files")
Link: https://lore.kernel.org/r/20200422092211.GA195357@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: firewire-lib: fix 'function sizeof not defined' error of tracepoints format

[ Upstream commit 1034872123a06b759aba772b1c99612ccb8e632a ]

The snd-firewire-lib.ko has 'amdtp-packet' event of tracepoints. Current
printk format for the event includes 'sizeof(u8)' macro expected to be
extended in compilation time. However, this is not done. As a result,
perf tools cannot parse the event for printing:

$ mount -l -t debugfs
debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime)
$ cat /sys/kernel/debug/tracing/events/snd_firewire_lib/amdtp_packet/format
...
print fmt: "%02u %04u %04x %04x %02d %03u %02u %03u %02u %01u %02u %s",
  REC->second, REC->cycle, REC->src, REC->dest, REC->channel,
  REC->payload_quadlets, REC->data_blocks, REC->data_block_counter,
  REC->packet_index, REC->irq, REC->index,
  __print_array(__get_dynamic_array(cip_header),
                __get_dynamic_array_len(cip_header),
                sizeof(u8))

$ sudo perf record -e snd_firewire_lib:amdtp_packet
  [snd_firewire_lib:amdtp_packet] function sizeof not defined
  Error: expected type 5 but read 0

This commit fixes it by obsoleting the macro with actual size.

Cc: <stable@vger.kernel.org>
Fixes: bde2bbdb307a ("ALSA: firewire-lib: use dynamic array for CIP header of tracing events")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200503045718.86337-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix error return code in map_lookup_and_delete_elem()

[ Upstream commit 7f645462ca01d01abb94d75e6768c8b3ed3a188b ]

Fix to return negative error code -EFAULT from the copy_to_user() error
handling case instead of 0, as done elsewhere in this function.

Fixes: bd513cd08f10 ("bpf: add MAP_LOOKUP_AND_DELETE_ELEM syscall")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200430081851.166996-1-weiyongjun1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>