Chin-Yen Lee [Tue, 8 Dec 2020 01:45:03 +0000 (09:45 +0800)]
rtw88: reduce polling time of IQ calibration
When 8822CE is associating with AP, driver will poll status bit of
IQ calibration to confirm the IQ calibration is done, and then move on
the association process. Current polling time for IQ calibration is 6
seconds.
But occasionally driver fails in polling the status bit because the status
bit is not set after IQ calibration is done. When it happends, association
process will be serieously delayed up to 6 seconds. To avoid it, we reduce
polling time to 300ms, in which the IQ calibration can be done.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201208014503.12118-1-pkshih@realtek.com
Ping-Ke Shih [Tue, 8 Dec 2020 01:37:46 +0000 (09:37 +0800)]
rtw88: fix multiple definition of rtw_pm_ops
'const struct dev_pm_ops rtw_pm_ops' is declared by pci.c, and it should be
declare as 'extern' in pci.h. Without 'extern' causes every file including
pci.h has an individual instance of rtw_pm_ops but not reference to the one
declared in pci.c
If kernel config, like test robot, doesn't build driver as module, it leads
multiple definition.
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
2e86ef413ab3 ("rtw88: pci: Add prototypes for .probe, .remove and .shutdown")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201208013746.11065-1-pkshih@realtek.com
Zhang Xiaohui [Sun, 6 Dec 2020 08:48:01 +0000 (16:48 +0800)]
mwifiex: Fix possible buffer overflows in mwifiex_cmd_802_11_ad_hoc_start
mwifiex_cmd_802_11_ad_hoc_start() calls memcpy() without checking
the destination size may trigger a buffer overflower,
which a local user could use to cause denial of service
or the execution of arbitrary code.
Fix it by putting the length check before calling memcpy().
Signed-off-by: Zhang Xiaohui <ruc_zhangxiaohui@163.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201206084801.26479-1-ruc_zhangxiaohui@163.com
Colin Ian King [Fri, 4 Dec 2020 18:04:59 +0000 (18:04 +0000)]
brcmfmac: remove redundant assignment to pointer 'entry'
The pointer 'entry' is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201204180459.1148257-1-colin.king@canonical.com
Zhang Changzhong [Fri, 4 Dec 2020 08:47:17 +0000 (16:47 +0800)]
adm8211: fix error return code in adm8211_probe()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes:
cc0b88cf5ecf ("[PATCH] Add adm8211 802.11b wireless driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607071638-33619-1-git-send-email-zhangchangzhong@huawei.com
Zong-Zhe Yang [Fri, 4 Dec 2020 01:38:23 +0000 (09:38 +0800)]
rtw88: declare hw supports ch 144
When driver was developed, FCC regulation didn't enable channel 144
and there was no demand for channel 144 at that time. Although HW
actually supports channel 144, driver didn't announce channel 144.
Therefore, channel 144 (20 MHz), channel 142 (40 MHz) and channel
138 (80 MHz) couldn't be used.
Today, channel 144 has been enabled by regulations and
is gradually being supported. With test requirements,
we declare hw supports channel 144.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201204013823.3729-1-pkshih@realtek.com
Colin Ian King [Thu, 3 Dec 2020 17:51:42 +0000 (17:51 +0000)]
rtw88: coex: fix missing unitialization of variable 'interval'
Currently the variable 'interval' is not initialized and is only set
to 1 when oex_stat->bt_418_hid_existi is true. Fix this by inintializing
variable interval to 0 (which I'm assuming is the intended default).
Addresses-Coverity: ("Uninitalized scalar variable")
Fixes:
5b2e9a35e456 ("rtw88: coex: add feature to enhance HID coexistence performance")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201203175142.1071738-1-colin.king@canonical.com
Colin Ian King [Thu, 3 Dec 2020 17:43:16 +0000 (17:43 +0000)]
wilc1000: remove redundant assignment to pointer vif
The assignment to pointer vif is redundant as the assigned value
is never read, hence it can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201203174316.1071446-1-colin.king@canonical.com
Ganapathi Bhat [Tue, 1 Dec 2020 09:18:27 +0000 (14:48 +0530)]
mwifiex: change license text of Makefile and README from MARVELL to NXP
As of 6-DEC-2019, NXP has acquired Marvell’s Wireless business
unit. This change is to update the license text accordingly.
commit
932183aa35c6 ("mwifiex: change license text from MARVELL
to NXP") does this, but it left out two files.
Signed-off-by: James Cao <zheng.cao@nxp.com>
Signed-off-by: Cathy Luo <xiaohua.luo@nxp.com>
Signed-off-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1606814307-32715-1-git-send-email-ganapathi.bhat@nxp.com
Christophe JAILLET [Sun, 29 Nov 2020 15:08:44 +0000 (16:08 +0100)]
mwl8k: switch from 'pci_' to 'dma_' API
he wrappers in include/linux/pci-dma-compat.h should go away.
The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.
When memory is allocated in 'mwl8k_rxq_init()' and 'mwl8k_txq_init()'
GFP_KERNEL can be used because this flag is already used in a 'kcalloc()'
call, just a few line below.
When memory is allocated in 'mwl8k_firmware_load_success()' GFP_KERNEL can
be used because this flag is already used within 'ieee80211_register_hw()'
which is called just a few line below.
@@
@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL
@@
@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@
@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@
@@
- PCI_DMA_NONE
+ DMA_NONE
@@
expression e1, e2, e3;
@@
- pci_alloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3;
@@
- pci_zalloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3, e4;
@@
- pci_free_consistent(e1, e2, e3, e4)
+ dma_free_coherent(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4, e5;
@@
- pci_map_page(e1, e2, e3, e4, e5)
+ dma_map_page(&e1->dev, e2, e3, e4, e5)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_page(e1, e2, e3, e4)
+ dma_unmap_page(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_sg(e1, e2, e3, e4)
+ dma_map_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_sg(e1, e2, e3, e4)
+ dma_unmap_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+ dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_device(e1, e2, e3, e4)
+ dma_sync_single_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+ dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+ dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_consistent_dma_mask(e1, e2)
+ dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201129150844.1466214-1-christophe.jaillet@wanadoo.fr
Lee Jones [Thu, 26 Nov 2020 13:31:52 +0000 (13:31 +0000)]
rtw88: pci: Add prototypes for .probe, .remove and .shutdown
Also strip out other duplicates from driver specific headers.
Ensure 'main.h' is explicitly included in 'pci.h' since the latter
uses some defines from the former. It avoids issues like:
from drivers/net/wireless/realtek/rtw88/rtw8822be.c:5:
drivers/net/wireless/realtek/rtw88/pci.h:209:28: error: ‘RTK_MAX_TX_QUEUE_NUM’ undeclared here (not in a function); did you mean ‘RTK_MAX_RX_DESC_NUM’?
209 | DECLARE_BITMAP(tx_queued, RTK_MAX_TX_QUEUE_NUM);
| ^~~~~~~~~~~~~~~~~~~~
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/realtek/rtw88/pci.c:1488:5: warning: no previous prototype for ‘rtw_pci_probe’ [-Wmissing-prototypes]
1488 | int rtw_pci_probe(struct pci_dev *pdev,
| ^~~~~~~~~~~~~
drivers/net/wireless/realtek/rtw88/pci.c:1568:6: warning: no previous prototype for ‘rtw_pci_remove’ [-Wmissing-prototypes]
1568 | void rtw_pci_remove(struct pci_dev *pdev)
| ^~~~~~~~~~~~~~
drivers/net/wireless/realtek/rtw88/pci.c:1590:6: warning: no previous prototype for ‘rtw_pci_shutdown’ [-Wmissing-prototypes]
1590 | void rtw_pci_shutdown(struct pci_dev *pdev)
| ^~~~~~~~~~~~~~~~
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201126133152.3211309-18-lee.jones@linaro.org
David S. Miller [Mon, 7 Dec 2020 03:22:15 +0000 (19:22 -0800)]
Merge branch 'mlxsw-Misc-updates'
Ido Schimmel says:
====================
mlxsw: Misc updates
This patchset contains miscellaneous patches we gathered in our queue.
Some of them are dependencies of larger patchsets that I will submit
later this cycle.
Patches #1-#3 perform small non-functional changes in mlxsw.
Patch #4 adds more extended ack messages in mlxsw.
Patch #5 adds devlink parameters documentation for mlxsw. To be extended
with more parameters this cycle.
Patches #6-#7 perform small changes in forwarding selftests
infrastructure.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sun, 6 Dec 2020 08:22:27 +0000 (10:22 +0200)]
mlxsw: spectrum_router: Reduce mlxsw_sp_ipip_fib_entry_op_gre4()
Turned out that mlxsw_sp_ipip_fib_entry_op_gre4() does not need to
figure out the IP address and virtual router id. Those are exactly
the same as in the fib_entry it is called for. So just use that and
reduce mlxsw_sp_ipip_fib_entry_op_gre4() function to only call
mlxsw_sp_ipip_fib_entry_op_gre4_rtdp() make the ipip decap op
code similar to nve.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Sun, 6 Dec 2020 08:22:26 +0000 (10:22 +0200)]
mlxsw: spectrum: Bump minimum FW version to xx.2008.2018
The indicated version fixes an issue whereby the MOMTE register would by
default enable mirroring of ECN-marked traffic from all traffic classes,
once the ECN mirroring was configured. This fix is necessary for offload
of RED "ecn_mark" qevent.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Sun, 6 Dec 2020 08:22:25 +0000 (10:22 +0200)]
mlxsw: core_acl: Use an array instead of a struct with a zero-length array
Suppresses the following coccinelle warning:
drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_keys.c:139:3-7:
WARNING use flexible-array member instead
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Sun, 6 Dec 2020 08:22:24 +0000 (10:22 +0200)]
mlxsw: spectrum_mr: Use flexible-array member instead of zero-length array
Suppresses the following coccinelle warning:
drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c:18:15-19: WARNING use flexible-array member instead
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Sun, 6 Dec 2020 08:22:23 +0000 (10:22 +0200)]
mlxsw: core: Trace EMAD events
Currently, mlxsw triggers the 'devlink:devlink_hwmsg' tracepoint
whenever a request is sent to the device and whenever a response is
received from it. However, the tracepoint is not triggered when an event
(e.g., port up / down) is received from the device.
Also trace EMAD events in order to log a more complete picture of all
the exchanged hardware messages.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Sun, 6 Dec 2020 08:22:22 +0000 (10:22 +0200)]
selftests: mlxsw: Test RIF's reference count when joining a LAG
Test that the reference count of a router interface (RIF) configured for
a LAG is incremented / decremented when ports join / leave the LAG. Use
the offload indication on routes configured on the RIF to understand if
it was created / destroyed.
The test fails without the previous patch.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Sun, 6 Dec 2020 08:22:21 +0000 (10:22 +0200)]
mlxsw: spectrum: Apply RIF configuration when joining a LAG
In case a router interface (RIF) is configured for a LAG, make sure its
configuration is applied on the new LAG member.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 6 Dec 2020 00:29:21 +0000 (16:29 -0800)]
Merge branch 'r8169-improve-rtl_rx-and-NUM_RX_DESC-handling'
Heiner Kallweit says:
====================
r8169: improve rtl_rx and NUM_RX_DESC handling
This series improves rtl_rx() and the handling of NUM_RX_DESC.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 6 Dec 2020 00:00:54 +0000 (01:00 +0100)]
r8169: make NUM_RX_DESC a signed int
After recent changes there's no need any longer to define NUM_RX_DESC
as an unsigned value.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 6 Dec 2020 00:00:07 +0000 (01:00 +0100)]
r8169: improve rtl_rx
There's no need to check min(budget, NUM_RX_DESC). At first budget
(NAPI_POLL_WEIGHT = 64) is less then NUM_RX_DESC (256).
And more important: Even in case of budget > NUM_RX_DESC we could
safely continue processing descriptors as long as they are owned by
the CPU. In addition replace rx_left with a normal counter variable,
this allows to simplify the code. Last but not least there's no need
any longer to pass the budget as an u32.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Fri, 4 Dec 2020 19:45:49 +0000 (19:45 +0000)]
net: fix spelling mistake "wil" -> "will" in Kconfig
There is a spelling mistake in the Kconfig help text. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201204194549.1153063-1-colin.king@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 5 Dec 2020 23:08:05 +0000 (15:08 -0800)]
Merge tag 'batadv-next-pullrequest-
20201204' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- update include for min/max helpers, by Sven Eckelmann
- add infrastructure and netlink functions for routing algo selection,
by Sven Eckelmann (2 patches)
- drop deprecated debugfs and sysfs support and obsoleted
functionality, by Sven Eckelmann (3 patches)
- drop unused include in fragmentation.c, by Simon Wunderlich
* tag 'batadv-next-pullrequest-
20201204' of git://git.open-mesh.org/linux-merge:
batman-adv: Drop unused soft-interface.h include in fragmentation.c
batman-adv: Drop legacy code for auto deleting mesh interfaces
batman-adv: Drop deprecated debugfs support
batman-adv: Drop deprecated sysfs support
batman-adv: Allow selection of routing algorithm over rtnetlink
batman-adv: Prepare infrastructure for newlink settings
batman-adv: Add new include for min/max helpers
batman-adv: Start new development cycle
====================
Link: https://lore.kernel.org/r/20201204154631.21063-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arnd Bergmann [Fri, 4 Dec 2020 12:08:00 +0000 (14:08 +0200)]
enetc: Fix unused var build warning for CONFIG_OF
When CONFIG_OF is disabled, there is a harmless warning about
an unused variable:
enetc_pf.c: In function 'enetc_phylink_create':
enetc_pf.c:981:17: error: unused variable 'dev' [-Werror=unused-variable]
Slightly rearrange the code to pass around the of_node as a
function argument, which avoids the problem without hurting
readability.
Fixes:
71b77a7a27a3 ("enetc: Migrate to PHYLINK and PCS_LYNX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20201204120800.17193-1-claudiu.manoil@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jonathan Lemon [Fri, 4 Dec 2020 03:51:28 +0000 (19:51 -0800)]
ptp: Add clock driver for the OpenCompute TimeCard.
The OpenCompute time card is an atomic clock along with
a GPS receiver that provides a Grandmaster clock source
for a PTP enabled network.
More information is available at http://www.timingcard.com/
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20201204035128.2219252-2-jonathan.lemon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bongsu Jeon [Wed, 2 Dec 2020 22:31:47 +0000 (07:31 +0900)]
net/nfc/nci: Support NCI 2.x initial sequence
implement the NCI 2.x initial sequence to support NCI 2.x NFCC.
Since NCI 2.0, CORE_RESET and CORE_INIT sequence have been changed.
If NFCEE supports NCI 2.x, then NCI 2.x initial sequence will work.
In NCI 1.0, Initial sequence and payloads are as below:
(DH) (NFCC)
| -- CORE_RESET_CMD --> |
| <-- CORE_RESET_RSP -- |
| -- CORE_INIT_CMD --> |
| <-- CORE_INIT_RSP -- |
CORE_RESET_RSP payloads are Status, NCI version, Configuration Status.
CORE_INIT_CMD payloads are empty.
CORE_INIT_RSP payloads are Status, NFCC Features,
Number of Supported RF Interfaces, Supported RF Interface,
Max Logical Connections, Max Routing table Size,
Max Control Packet Payload Size, Max Size for Large Parameters,
Manufacturer ID, Manufacturer Specific Information.
In NCI 2.0, Initial Sequence and Parameters are as below:
(DH) (NFCC)
| -- CORE_RESET_CMD --> |
| <-- CORE_RESET_RSP -- |
| <-- CORE_RESET_NTF -- |
| -- CORE_INIT_CMD --> |
| <-- CORE_INIT_RSP -- |
CORE_RESET_RSP payloads are Status.
CORE_RESET_NTF payloads are Reset Trigger,
Configuration Status, NCI Version, Manufacturer ID,
Manufacturer Specific Information Length,
Manufacturer Specific Information.
CORE_INIT_CMD payloads are Feature1, Feature2.
CORE_INIT_RSP payloads are Status, NFCC Features,
Max Logical Connections, Max Routing Table Size,
Max Control Packet Payload Size,
Max Data Packet Payload Size of the Static HCI Connection,
Number of Credits of the Static HCI Connection,
Max NFC-V RF Frame Size, Number of Supported RF Interfaces,
Supported RF Interfaces.
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Link: https://lore.kernel.org/r/20201202223147.3472-1-bongsu.jeon@samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guillaume Nault [Wed, 2 Dec 2020 14:35:43 +0000 (15:35 +0100)]
selftests: forwarding: Add MPLS L2VPN test
Connect hosts H1 and H2 using two intermediate encapsulation routers
(LER1 and LER2). These routers encapsulate traffic from the hosts,
including the original Ethernet header, into MPLS.
Use ping to test reachability between H1 and H2.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/625f5c1aafa3a8085f8d3e082d680a82e16ffbaa.1606918980.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tom Rix [Wed, 2 Dec 2020 16:36:22 +0000 (08:36 -0800)]
net: bna: remove trailing semicolon in macro definition
The macro use will already have a semicolon.
Clean up escaped newlines.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201202163622.3733506-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hoang Le [Thu, 3 Dec 2020 03:50:45 +0000 (10:50 +0700)]
tipc: support 128bit node identity for peer removing
We add the support to remove a specific node down with 128bit
node identifier, as an alternative to legacy 32-bit node address.
example:
$tipc peer remove identiy <1001002|
16777777>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Link: https://lore.kernel.org/r/20201203035045.4564-1-hoang.h.le@dektech.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Horman [Fri, 4 Dec 2020 12:56:01 +0000 (13:56 +0100)]
nfp: Replace zero-length array with flexible-array member
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code
should always use "flexible array members"[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arrays
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Link: https://lore.kernel.org/r/20201204125601.24876-1-simon.horman@netronome.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bongsu Jeon [Thu, 3 Dec 2020 22:52:57 +0000 (07:52 +0900)]
nfc: s3fwrn5: skip the NFC bootloader mode
If there isn't a proper NFC firmware image, Bootloader mode will be
skipped.
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201203225257.2446-1-bongsu.jeon@samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 4 Dec 2020 21:40:55 +0000 (13:40 -0800)]
Merge branch 'perf-optimizations-for-tcp-recv-zerocopy'
Arjun Roy says:
====================
Perf. optimizations for TCP Recv. Zerocopy
This patchset contains several optimizations for TCP Recv. Zerocopy.
Summarized:
1. It is possible that a read payload is not exactly page aligned -
that there may exist "straggler" bytes that we cannot map into the
caller's address space cleanly. For this, we allow the caller to
provide as argument a "hybrid copy buffer", turning
getsockopt(TCP_ZEROCOPY_RECEIVE) into a "hybrid" operation that allows
the caller to avoid a subsequent recvmsg() call to read the
stragglers.
2. Similarly, for "small" read payloads that are either below the size
of a page, or small enough that remapping pages is not a performance
win - we allow the user to short-circuit the remapping operations
entirely and simply copy into the buffer provided.
Some of the patches in the middle of this set are refactors to support
this "short-circuiting" optimization.
3. We allow the user to provide a hint that performing a page zap
operation (and the accompanying TLB shootdown) may not be necessary,
for the provided region that the kernel will attempt to map pages
into. This allows us to avoid this expensive operation while holding
the socket lock, which provides a significant performance advantage.
With all of these changes combined, "medium" sized receive traffic
(multiple tens to few hundreds of KB) see significant efficiency gains
when using TCP receive zerocopy instead of regular recvmsg(). For
example, with RPC-style traffic with 32KB messages, there is a roughly
15% efficiency improvement when using zerocopy. Without these changes,
there is a roughly 60-70% efficiency reduction with such messages when
employing zerocopy.
====================
Link: https://lore.kernel.org/r/20201202225349.935284-1-arjunroy.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arjun Roy [Wed, 2 Dec 2020 22:53:49 +0000 (14:53 -0800)]
net-zerocopy: Defer vm zap unless actually needed.
Zapping pages is required only if we are calling vm_insert_page into a
region where pages had previously been mapped. Receive zerocopy allows
reusing such regions, and hitherto called zap_page_range() before
calling vm_insert_page() in that range.
zap_page_range() can also be triggered from userspace with
madvise(MADV_DONTNEED). If userspace is configured to call this before
reusing a segment, or if there was nothing mapped at this virtual
address to begin with, we can avoid calling zap_page_range() under the
socket lock. That said, if userspace does not do that, then we are
still responsible for calling zap_page_range().
This patch adds a flag that the user can use to hint to the kernel
that a zap is not required. If the flag is not set, or if an older
user application does not have a flags field at all, then the kernel
calls zap_page_range as before. Also, if the flag is set but a zap is
still required, the kernel performs that zap as necessary. Thus
incorrectly indicating that a zap can be avoided does not change the
correctness of operation. It also increases the batchsize for
vm_insert_pages and prefetches the page struct for the batch since
we're about to bump the refcount.
An alternative mechanism could be to not have a flag, assume by
default a zap is not needed, and fall back to zapping if needed.
However, this would harm performance for older applications for which
a zap is necessary, and thus we implement it with an explicit flag
so newer applications can opt in.
When using RPC-style traffic with medium sized (tens of KB) RPCs, this
change yields an efficency improvement of about 30% for QPS/CPU usage.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arjun Roy [Wed, 2 Dec 2020 22:53:48 +0000 (14:53 -0800)]
net-zerocopy: Set zerocopy hint when data is copied
Set zerocopy hint, event when falling back to copy, so that the
pending data can be efficiently received using zerocopy when
possible.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arjun Roy [Wed, 2 Dec 2020 22:53:47 +0000 (14:53 -0800)]
net-zerocopy: Introduce short-circuit small reads.
Sometimes, we may call tcp receive zerocopy when inq is 0,
or inq < PAGE_SIZE, or inq is generally small enough that
it is cheaper to copy rather than remap pages.
In these cases, we may want to either return early (inq=0) or
attempt to use the provided copy buffer to simply copy
the received data.
This allows us to save both system call overhead and
the latency of acquiring mmap_sem in read mode for cases where
it would be useless to do so.
This patchset enables this behaviour by:
1. Returning quickly if inq is 0.
2. Attempting to perform a regular copy if a hybrid copybuffer is
provided and it is large enough to absorb all available bytes.
3. Return quickly if no such buffer was provided and there are less
than PAGE_SIZE bytes available.
For small RPC ping-pong workloads, normally we would have
1 getsockopt(), 1 recvmsg() and 1 sendmsg() call per RPC. With this
change, we remove the recvmsg() call entirely, reducing the syscall
overhead by about 33%. In testing with small (hundreds of bytes)
RPC traffic, this yields a syscall reduction of about 33% and
an efficiency gain of about 3-5% when defined as QPS/CPU Util.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arjun Roy [Wed, 2 Dec 2020 22:53:46 +0000 (14:53 -0800)]
net-zerocopy: Fast return if inq < PAGE_SIZE
Sometimes, we may call tcp receive zerocopy when inq is 0,
or inq < PAGE_SIZE, in which case we cannot remap pages. In this case,
simply return the appropriate hint for regular copying without taking
mmap_sem.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arjun Roy [Wed, 2 Dec 2020 22:53:45 +0000 (14:53 -0800)]
net-zerocopy: Refactor frag-is-remappable test.
Refactor frag-is-remappable test for tcp receive zerocopy. This is
part of a patch set that introduces short-circuited hybrid copies
for small receive operations, which results in roughly 33% fewer
syscalls for small RPC scenarios.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arjun Roy [Wed, 2 Dec 2020 22:53:44 +0000 (14:53 -0800)]
net-zerocopy: Refactor skb frag fast-forward op.
Refactor skb frag fast-forwarding for tcp receive zerocopy. This is
part of a patch set that introduces short-circuited hybrid copies
for small receive operations, which results in roughly 33% fewer
syscalls for small RPC scenarios.
skb_advance_to_frag(), given a skb and an offset into the skb,
iterates from the first frag for the skb until we're at the frag
specified by the offset. Assuming the offset provided refers to how
many bytes in the skb are already read, the returned frag points to
the next frag we may read from, while offset_frag is set to the number
of bytes from this frag that we have already read.
If frag is not null and offset_frag is equal to 0, then we may be able
to map this frag's page into the process address space with
vm_insert_page(). However, if offset_frag is not equal to 0, then we
cannot do so.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arjun Roy [Wed, 2 Dec 2020 22:53:43 +0000 (14:53 -0800)]
net-tcp: Introduce tcp_recvmsg_locked().
Refactor tcp_recvmsg() by splitting it into locked and unlocked
portions. Callers already holding the socket lock and not using
ERRQUEUE/cmsg/busy polling can simply call tcp_recvmsg_locked().
This is in preparation for a short-circuit copy performed by
TCP receive zerocopy for small (< PAGE_SIZE, or otherwise requested
by the user) reads.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arjun Roy [Wed, 2 Dec 2020 22:53:42 +0000 (14:53 -0800)]
net-zerocopy: Copy straggler unaligned data for TCP Rx. zerocopy.
When TCP receive zerocopy does not successfully map the entire
requested space, it outputs a 'hint' that the caller should recvmsg().
Augment zerocopy to accept a user buffer that it tries to copy this
hint into - if it is possible to copy the entire hint, it will do so.
This elides a recvmsg() call for received traffic that isn't exactly
page-aligned in size.
This was tested with RPC-style traffic of arbitrary sizes. Normally,
each received message required at least one getsockopt() call, and one
recvmsg() call for the remaining unaligned data.
With this change, almost all of the recvmsg() calls are eliminated,
leading to a savings of about 25%-50% in number of system calls
for RPC-style workloads.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 4 Dec 2020 21:30:53 +0000 (13:30 -0800)]
Merge branch 'seg6-add-support-for-srv6-end-dt4-dt6-behavior'
Andrea Mayer says:
====================
seg6: add support for SRv6 End.DT4/DT6 behavior
This patchset provides support for the SRv6 End.DT4 and End.DT6 (VRF mode)
behaviors.
The SRv6 End.DT4 behavior is used to implement multi-tenant IPv4 L3 VPNs. It
decapsulates the received packets and performs IPv4 routing lookup in the
routing table of the tenant. The SRv6 End.DT4 Linux implementation leverages a
VRF device in order to force the routing lookup into the associated routing
table.
The SRv6 End.DT4 behavior is defined in the SRv6 Network Programming [1].
The Linux kernel already offers an implementation of the SRv6 End.DT6 behavior
which allows us to set up IPv6 L3 VPNs over SRv6 networks. This new
implementation of DT6 is based on the same VRF infrastructure already exploited
for implementing the SRv6 End.DT4 behavior. The aim of the new SRv6 End.DT6 in
VRF mode consists in simplifying the construction of IPv6 L3 VPN services in
the multi-tenant environment.
Currently, the two SRv6 End.DT6 implementations (legacy and VRF mode)
coexist seamlessly and can be chosen according to the context and the user
preferences.
- Patch 1 is needed to solve a pre-existing issue with tunneled packets
when a sniffer is attached;
- Patch 2 improves the management of the seg6local attributes used by the
SRv6 behaviors;
- Patch 3 adds support for optional attributes in SRv6 behaviors;
- Patch 4 introduces two callbacks used for customizing the
creation/destruction of a SRv6 behavior;
- Patch 5 is the core patch that adds support for the SRv6 End.DT4
behavior;
- Patch 6 introduces the VRF support for SRv6 End.DT6 behavior;
- Patch 7 adds the selftest for SRv6 End.DT4 behavior;
- Patch 8 adds the selftest for SRv6 End.DT6 (VRF mode) behavior.
Regarding iproute2, the support for the new "vrftable" attribute, required by
both SRv6 End.DT4 and End.DT6 (VRF mode) behaviors, is provided in a different
patchset that will follow shortly.
I would like to thank David Ahern for his support during the development of
this patchset.
[1] https://tools.ietf.org/html/draft-ietf-spring-srv6-network-programming
====================
Link: https://lore.kernel.org/r/20201202130517.4967-1-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrea Mayer [Wed, 2 Dec 2020 13:05:17 +0000 (14:05 +0100)]
selftests: add selftest for the SRv6 End.DT6 (VRF) behavior
this selftest is designed for evaluating the new SRv6 End.DT6 (VRF) behavior
used, in this example, for implementing IPv6 L3 VPN use cases.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Paolo Lungaroni <paolo.lungaroni@cnit.it>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrea Mayer [Wed, 2 Dec 2020 13:05:16 +0000 (14:05 +0100)]
selftests: add selftest for the SRv6 End.DT4 behavior
this selftest is designed for evaluating the new SRv6 End.DT4 behavior
used, in this example, for implementing IPv4 L3 VPN use cases.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrea Mayer [Wed, 2 Dec 2020 13:05:15 +0000 (14:05 +0100)]
seg6: add VRF support for SRv6 End.DT6 behavior
SRv6 End.DT6 is defined in the SRv6 Network Programming [1].
The Linux kernel already offers an implementation of the SRv6
End.DT6 behavior which permits IPv6 L3 VPNs over SRv6 networks. This
implementation is not particularly suitable in contexts where we need to
deploy IPv6 L3 VPNs among different tenants which share the same network
address schemes. The underlying problem lies in the fact that the
current version of DT6 (called legacy DT6 from now on) needs a complex
configuration to be applied on routers which requires ad-hoc routes and
routing policy rules to ensure the correct isolation of tenants.
Consequently, a new implementation of DT6 has been introduced with the
aim of simplifying the construction of IPv6 L3 VPN services in the
multi-tenant environment using SRv6 networks. To accomplish this task,
we reused the same VRF infrastructure and SRv6 core components already
exploited for implementing the SRv6 End.DT4 behavior.
Currently the two End.DT6 implementations coexist seamlessly and can be
used depending on the context and the user preferences. So, in order to
support both versions of DT6 a new attribute (vrftable) has been
introduced which allows us to differentiate the implementation of the
behavior to be used.
A SRv6 End.DT6 legacy behavior is still instantiated using a command
like the following one:
$ ip -6 route add 2001:db8::1 encap seg6local action End.DT6 table 100 dev eth0
While to instantiate the SRv6 End.DT6 in VRF mode, the command is still
pretty straight forward:
$ ip -6 route add 2001:db8::1 encap seg6local action End.DT6 vrftable 100 dev eth0.
Obviously as in the case of SRv6 End.DT4, the VRF strict_mode parameter
must be set (net.vrf.strict_mode=1) and the VRF associated with table
100 must exist.
Please note that the instances of SRv6 End.DT6 legacy and End.DT6 VRF
mode can coexist in the same system/configuration without problems.
[1] https://tools.ietf.org/html/draft-ietf-spring-srv6-network-programming
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrea Mayer [Wed, 2 Dec 2020 13:05:14 +0000 (14:05 +0100)]
seg6: add support for the SRv6 End.DT4 behavior
SRv6 End.DT4 is defined in the SRv6 Network Programming [1].
The SRv6 End.DT4 is used to implement IPv4 L3VPN use-cases in
multi-tenants environments. It decapsulates the received packets and it
performs IPv4 routing lookup in the routing table of the tenant.
The SRv6 End.DT4 Linux implementation leverages a VRF device in order to
force the routing lookup into the associated routing table.
To make the End.DT4 work properly, it must be guaranteed that the routing
table used for routing lookup operations is bound to one and only one
VRF during the tunnel creation. Such constraint has to be enforced by
enabling the VRF strict_mode sysctl parameter, i.e:
$ sysctl -wq net.vrf.strict_mode=1.
At JANOG44, LINE corporation presented their multi-tenant DC architecture
using SRv6 [2]. In the slides, they reported that the Linux kernel is
missing the support of SRv6 End.DT4 behavior.
The SRv6 End.DT4 behavior can be instantiated using a command similar to
the following:
$ ip route add 2001:db8::1 encap seg6local action End.DT4 vrftable 100 dev eth0
We introduce the "vrftable" extension in iproute2 in a following patch.
[1] https://tools.ietf.org/html/draft-ietf-spring-srv6-network-programming
[2] https://speakerdeck.com/line_developers/line-data-center-networking-with-srv6
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrea Mayer [Wed, 2 Dec 2020 13:05:13 +0000 (14:05 +0100)]
seg6: add callbacks for customizing the creation/destruction of a behavior
We introduce two callbacks used for customizing the creation/destruction of
a SRv6 behavior. Such callbacks are defined in the new struct
seg6_local_lwtunnel_ops and hereafter we provide a brief description of
them:
- build_state(...): used for calling the custom constructor of the
behavior during its initialization phase and after all the attributes
have been parsed successfully;
- destroy_state(...): used for calling the custom destructor of the
behavior before it is completely destroyed.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrea Mayer [Wed, 2 Dec 2020 13:05:12 +0000 (14:05 +0100)]
seg6: add support for optional attributes in SRv6 behaviors
Before this patch, each SRv6 behavior specifies a set of required
attributes that must be provided by the userspace application when such
behavior is going to be instantiated. If at least one of the required
attributes is not provided, the creation of the behavior fails.
The SRv6 behavior framework lacks a way to manage optional attributes.
By definition, an optional attribute for a SRv6 behavior consists of an
attribute which may or may not be provided by the userspace. Therefore,
if an optional attribute is missing (and thus not supplied by the user)
the creation of the behavior goes ahead without any issue.
This patch explicitly differentiates the required attributes from the
optional attributes. In particular, each behavior can declare a set of
required attributes and a set of optional ones.
The semantic of the required attributes remains *totally* unaffected by
this patch. The introduction of the optional attributes does NOT impact
on the backward compatibility of the existing SRv6 behaviors.
It is essential to note that if an (optional or required) attribute is
supplied to a SRv6 behavior which does not expect it, the behavior
simply discards such attribute without generating any error or warning.
This operating mode remained unchanged both before and after the
introduction of the optional attributes extension.
The optional attributes are one of the key components used to implement
the SRv6 End.DT6 behavior based on the Virtual Routing and Forwarding
(VRF) framework. The optional attributes make possible the coexistence
of the already existing SRv6 End.DT6 implementation with the new SRv6
End.DT6 VRF-based implementation without breaking any backward
compatibility. Further details on the SRv6 End.DT6 behavior (VRF mode)
are reported in subsequent patches.
From the userspace point of view, the support for optional attributes DO
NOT require any changes to the userspace applications, i.e: iproute2
unless new attributes (required or optional) are needed.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrea Mayer [Wed, 2 Dec 2020 13:05:11 +0000 (14:05 +0100)]
seg6: improve management of behavior attributes
Depending on the attribute (i.e.: SEG6_LOCAL_SRH, SEG6_LOCAL_TABLE, etc),
the parse() callback performs some validity checks on the provided input
and updates the tunnel state (slwt) with the result of the parsing
operation. However, an attribute may also need to reserve some additional
resources (i.e.: memory or setting up an eBPF program) in the parse()
callback to complete the parsing operation.
The parse() callbacks are invoked by the parse_nla_action() for each
attribute belonging to a specific behavior. Given a behavior with N
attributes, if the parsing of the i-th attribute fails, the
parse_nla_action() returns immediately with an error. Nonetheless, the
resources acquired during the parsing of the i-1 attributes are not freed
by the parse_nla_action().
Attributes which acquire resources must release them *in an explicit way*
in both the seg6_local_{build/destroy}_state(). However, adding a new
attribute of this type requires changes to
seg6_local_{build/destroy}_state() to release the resources correctly.
The seg6local infrastructure still lacks a simple and structured way to
release the resources acquired in the parse() operations.
We introduced a new callback in the struct seg6_action_param named
destroy(). This callback releases any resource which may have been acquired
in the parse() counterpart. Each attribute may or may not implement the
destroy() callback depending on whether it needs to free some acquired
resources.
The destroy() callback comes with several of advantages:
1) we can have many attributes as we want for a given behavior with no
need to explicitly free the taken resources;
2) As in case of the seg6_local_build_state(), the
seg6_local_destroy_state() does not need to handle the release of
resources directly. Indeed, it calls the destroy_attrs() function which
is in charge of calling the destroy() callback for every set attribute.
We do not need to patch seg6_local_{build/destroy}_state() anymore as
we add new attributes;
3) the code is more readable and better structured. Indeed, all the
information needed to handle a given attribute are contained in only
one place;
4) it facilitates the integration with new features introduced in further
patches.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrea Mayer [Wed, 2 Dec 2020 13:05:10 +0000 (14:05 +0100)]
vrf: add mac header for tunneled packets when sniffer is attached
Before this patch, a sniffer attached to a VRF used as the receiving
interface of L3 tunneled packets detects them as malformed packets and
it complains about that (i.e.: tcpdump shows bogus packets).
The reason is that a tunneled L3 packet does not carry any L2
information and when the VRF is set as the receiving interface of a
decapsulated L3 packet, no mac header is currently set or valid.
Therefore, the purpose of this patch consists of adding a MAC header to
any packet which is directly received on the VRF interface ONLY IF:
i) a sniffer is attached on the VRF and ii) the mac header is not set.
In this case, the mac address of the VRF is copied in both the
destination and the source address of the ethernet header. The protocol
type is set either to IPv4 or IPv6, depending on which L3 packet is
received.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 4 Dec 2020 18:56:37 +0000 (10:56 -0800)]
Merge tag 'wireless-drivers-next-2020-12-03' of git://git./linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.11
First set of patches for v5.11. rtw88 getting improvements to work
better with Bluetooth and other driver also getting some new features.
mhi-ath11k-immutable branch was pulled from mhi tree to avoid
conflicts with mhi tree.
Major changes:
rtw88
* major bluetooth co-existance improvements
wilc1000
* Wi-Fi Multimedia (WMM) support
ath11k
* Fast Initial Link Setup (FILS) discovery and unsolicited broadcast
probe response support
* qcom,ath11k-calibration-variant Device Tree setting
* cold boot calibration support
* new DFS region: JP
wnc36xx
* enable connection monitoring and keepalive in firmware
ath10k
* firmware IRAM recovery feature
mhi
* merge mhi-ath11k-immutable branch to make MHI API change go smoothly
* tag 'wireless-drivers-next-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (180 commits)
wl1251: remove trailing semicolon in macro definition
airo: remove trailing semicolon in macro definition
wilc1000: added queue support for WMM
wilc1000: call complete() for failure in wilc_wlan_txq_add_cfg_pkt()
wilc1000: free resource in wilc_wlan_txq_add_mgmt_pkt() for failure path
wilc1000: free resource in wilc_wlan_txq_add_net_pkt() for failure path
wilc1000: added 'ndo_set_mac_address' callback support
brcmfmac: expose firmware config files through modinfo
wlcore: Switch to using the new API kobj_to_dev()
rtw88: coex: add feature to enhance HID coexistence performance
rtw88: coex: upgrade coexistence A2DP mechanism
rtw88: coex: add action for coexistence in hardware initial
rtw88: coex: add function to avoid cck lock
rtw88: coex: change the coexistence mechanism for WLAN connected
rtw88: coex: change the coexistence mechanism for HID
rtw88: coex: update AFH information while in free-run mode
rtw88: coex: update the mechanism for A2DP + PAN
rtw88: coex: add debug message
rtw88: coex: run coexistence when WLAN entering/leaving LPS
Revert "rtl8xxxu: Add Buffalo WI-U3-866D to list of supported devices"
...
====================
Link: https://lore.kernel.org/r/20201203185732.9CFA5C433ED@smtp.codeaurora.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Anders Roxell [Thu, 3 Dec 2020 14:43:43 +0000 (15:43 +0100)]
dpaa_eth: fix build errorr in dpaa_fq_init
When building FSL_DPAA_ETH the following build error shows up:
/tmp/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c: In function ‘dpaa_fq_init’:
/tmp/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:1135:9: error: too few arguments to function ‘xdp_rxq_info_reg’
1135 | err = xdp_rxq_info_reg(&dpaa_fq->xdp_rxq, dpaa_fq->net_dev,
| ^~~~~~~~~~~~~~~~
Commit
b02e5a0ebb17 ("xsk: Propagate napi_id to XDP socket Rx path")
added an extra argument to function xdp_rxq_info_reg and commit
d57e57d0cd04 ("dpaa_eth: add XDP_TX support") didn't know about that
extra argument.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/r/20201203144343.790719-1-anders.roxell@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 4 Dec 2020 15:48:11 +0000 (07:48 -0800)]
Merge https://git./linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-12-03
The main changes are:
1) Support BTF in kernel modules, from Andrii.
2) Introduce preferred busy-polling, from Björn.
3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh.
4) Memcg-based memory accounting for bpf objects, from Roman.
5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits)
selftests/bpf: Fix invalid use of strncat in test_sockmap
libbpf: Use memcpy instead of strncpy to please GCC
selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module
selftests/bpf: Add tp_btf CO-RE reloc test for modules
libbpf: Support attachment of BPF tracing programs to kernel modules
libbpf: Factor out low-level BPF program loading helper
bpf: Allow to specify kernel module BTFs when attaching BPF programs
bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier
selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF
selftests/bpf: Add support for marking sub-tests as skipped
selftests/bpf: Add bpf_testmod kernel module for testing
libbpf: Add kernel module BTF support for CO-RE relocations
libbpf: Refactor CO-RE relocs to not assume a single BTF object
libbpf: Add internal helper to load BTF data by FD
bpf: Keep module's btf_data_size intact after load
bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address()
selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP
bpf: Adds support for setting window clamp
samples/bpf: Fix spelling mistake "recieving" -> "receiving"
bpf: Fix cold build of test_progs-no_alu32
...
====================
Link: https://lore.kernel.org/r/20201204021936.85653-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Wunderlich [Fri, 4 Dec 2020 07:41:16 +0000 (08:41 +0100)]
batman-adv: Drop unused soft-interface.h include in fragmentation.c
The commit
992b03b88e36 ("batman-adv: Don't always reallocate the
fragmentation skb head") removed the last user of functions from
soft-interface.h.
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Sven Eckelmann [Mon, 17 Aug 2020 12:37:13 +0000 (14:37 +0200)]
batman-adv: Drop legacy code for auto deleting mesh interfaces
The only way to automatically drop batadv mesh interfaces when all soft
interfaces were removed was dropped with the sysfs support. It is no longer
needed to have them handled by kernel anymore.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Sven Eckelmann [Mon, 17 Aug 2020 11:42:29 +0000 (13:42 +0200)]
batman-adv: Drop deprecated debugfs support
The debugfs support in batman-adv was marked as deprecated by the commit
00caf6a2b318 ("batman-adv: Mark debugfs functionality as deprecated") and
scheduled for removal in 2021.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Sven Eckelmann [Mon, 17 Aug 2020 11:42:29 +0000 (13:42 +0200)]
batman-adv: Drop deprecated sysfs support
The sysfs in batman-adv support was marked as deprecated by the commit
42cdd521487f ("batman-adv: ABI: Mark sysfs files as deprecated") and
scheduled for removal in 2021.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Sven Eckelmann [Sun, 11 Oct 2020 10:25:24 +0000 (12:25 +0200)]
batman-adv: Allow selection of routing algorithm over rtnetlink
A batadv net_device is associated to a B.A.T.M.A.N. routing algorithm. This
algorithm has to be selected before the interface is initialized and cannot
be changed after that. The only way to select this algorithm was a module
parameter which specifies the default algorithm used during the creation of
the net_device.
This module parameter is writeable over
/sys/module/batman_adv/parameters/routing_algo and thus allows switching of
the routing algorithm:
1. change routing_algo parameter
2. create new batadv net_device
But this is not race free because another process can be scheduled between
1 + 2 and in that time frame change the routing_algo parameter again.
It is much cleaner to directly provide this information inside the
rtnetlink's RTM_NEWLINK message. The two processes would be (in regards of
the creation parameter of their batadv interfaces) be isolated. This also
eases the integration of batadv devices inside tools like network-manager
or systemd-networkd which are not expecting to operate on /sys before a new
net_device is created.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Sven Eckelmann [Sun, 11 Oct 2020 10:25:23 +0000 (12:25 +0200)]
batman-adv: Prepare infrastructure for newlink settings
The batadv generic netlink family can be used to retrieve the current state
and set various configuration settings. But there are also settings which
must be set before the actual interface is created.
The rtnetlink already uses IFLA_INFO_DATA to allow net_device families to
transfer such configurations. The minimal required functionality for this
is now available for the batadv rtnl_link_ops. Also a new IFLA class of
attributes will be attached to it because rtnetlink only allows 51
different attributes but batadv_nl_attrs already contains 62 attributes.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Sven Eckelmann [Mon, 26 Oct 2020 20:01:59 +0000 (21:01 +0100)]
batman-adv: Add new include for min/max helpers
The commit
b296a6d53339 ("kernel.h: split out min()/max() et al. helpers")
moved the min/max helper functionality from kernel.h to minmax.h. Adjust
the kernel code accordingly to avoid fragile indirect includes.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Simon Wunderlich [Tue, 27 Oct 2020 13:58:32 +0000 (14:58 +0100)]
batman-adv: Start new development cycle
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Andrii Nakryiko [Thu, 3 Dec 2020 23:54:40 +0000 (15:54 -0800)]
selftests/bpf: Fix invalid use of strncat in test_sockmap
strncat()'s third argument is how many bytes will be added *in addition* to
already existing bytes in destination. Plus extra zero byte will be added
after that. So existing use in test_sockmap has many opportunities to overflow
the string and cause memory corruptions. And in this case, GCC complains for
a good reason.
Fixes:
16962b2404ac ("bpf: sockmap, add selftests")
Fixes:
73563aa3d977 ("selftests/bpf: test_sockmap, print additional test options")
Fixes:
1ade9abadfca ("bpf: test_sockmap, add options for msg_pop_data() helper")
Fixes:
463bac5f1ca7 ("bpf, selftests: Add test for ktls with skb bpf ingress policy")
Fixes:
e9dd904708c4 ("bpf: add tls support for testing in test_sockmap")
Fixes:
753fb2ee0934 ("bpf: sockmap, add msg_peek tests to test_sockmap")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203235440.2302137-2-andrii@kernel.org
Andrii Nakryiko [Thu, 3 Dec 2020 23:54:39 +0000 (15:54 -0800)]
libbpf: Use memcpy instead of strncpy to please GCC
Some versions of GCC are really nit-picky about strncpy() use. Use memcpy(),
as they are pretty much equivalent for the case of fixed length strings.
Fixes:
e459f49b4394 ("libbpf: Separate XDP program load with xsk socket creation")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203235440.2302137-1-andrii@kernel.org
Alexei Starovoitov [Fri, 4 Dec 2020 01:38:22 +0000 (17:38 -0800)]
Merge branch 'Support BTF-powered BPF tracing programs for kernel modules'
Andrii Nakryiko says:
====================
This patch sets extends kernel and libbpf with support for attaching
BTF-powered raw tracepoint (tp_btf) and tracing (fentry/fexit/fmod_ret/lsm)
BPF programs to BPF hooks defined in kernel modules. As part of that, libbpf
now supports performing CO-RE relocations against types in kernel module BTFs,
in addition to existing vmlinux BTF support.
Kernel UAPI for BPF_PROG_LOAD now allows to specify kernel module (or vmlinux)
BTF object FD in attach_btf_obj_fd field, aliased to attach_prog_fd. This is
used to identify which BTF object needs to be used for finding BTF type by
provided attach_btf_id.
This patch set also sets up a convenient and fully-controlled custom kernel
module (called "bpf_testmod"), that is a predictable playground for all the
BPF selftests, that rely on module BTFs. Currently pahole doesn't generate
BTF_KIND_FUNC info for ftrace-able static functions in kernel modules, so
expose traced function in bpf_sidecar.ko. Once pahole is enhanced, we can go
back to static function.
From end user perspective there are no extra actions that need to happen.
Libbpf will continue searching across all kernel module BTFs, if desired
attach BTF type is not found in vmlinux. That way it doesn't matter if BPF
hook that user is trying to attach to is built into vmlinux image or is
loaded in kernel module.
v5->v6:
- move btf_put() back to syscall.c (kernel test robot);
- added close(fd) in patch #5 (John);
v4->v5:
- use FD to specify BTF object (Alexei);
- move prog->aux->attach_btf putting into bpf_prog_free() for consistency
with putting prog->aux->dst_prog;
- fix BTF FD leak(s) in libbpf;
v3->v4:
- merge together patch sets [0] and [1];
- avoid increasing bpf_reg_state by reordering fields (Alexei);
- preserve btf_data_size in struct module;
v2->v3:
- fix subtle uninitialized variable use in BTF ID iteration code;
v1->v2:
- module_put() inside preempt_disable() region (Alexei);
- bpf_sidecar -> bpf_testmod rename (Alexei);
- test_progs more relaxed handling of bpf_testmod;
- test_progs marks skipped sub-tests properly as SKIP now.
[0] https://patchwork.kernel.org/project/netdevbpf/list/?series=393677&state=*
[1] https://patchwork.kernel.org/project/netdevbpf/list/?series=393679&state=*
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Thu, 3 Dec 2020 20:46:34 +0000 (12:46 -0800)]
selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module
Add new selftest checking attachment of fentry/fexit/fmod_ret (and raw
tracepoint ones for completeness) BPF programs to kernel module function.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-15-andrii@kernel.org
Andrii Nakryiko [Thu, 3 Dec 2020 20:46:33 +0000 (12:46 -0800)]
selftests/bpf: Add tp_btf CO-RE reloc test for modules
Add another CO-RE relocation test for kernel module relocations. This time for
tp_btf with direct memory reads.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-14-andrii@kernel.org
Andrii Nakryiko [Thu, 3 Dec 2020 20:46:32 +0000 (12:46 -0800)]
libbpf: Support attachment of BPF tracing programs to kernel modules
Teach libbpf to search for BTF types in kernel modules for tracing BPF
programs. This allows attachment of raw_tp/fentry/fexit/fmod_ret/etc BPF
program types to tracepoints and functions in kernel modules.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-13-andrii@kernel.org
Andrii Nakryiko [Thu, 3 Dec 2020 20:46:31 +0000 (12:46 -0800)]
libbpf: Factor out low-level BPF program loading helper
Refactor low-level API for BPF program loading to not rely on public API
types. This allows painless extension without constant efforts to cleverly not
break backwards compatibility.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-12-andrii@kernel.org
Andrii Nakryiko [Thu, 3 Dec 2020 20:46:30 +0000 (12:46 -0800)]
bpf: Allow to specify kernel module BTFs when attaching BPF programs
Add ability for user-space programs to specify non-vmlinux BTF when attaching
BTF-powered BPF programs: raw_tp, fentry/fexit/fmod_ret, LSM, etc. For this,
attach_prog_fd (now with the alias name attach_btf_obj_fd) should specify FD
of a module or vmlinux BTF object. For backwards compatibility reasons,
0 denotes vmlinux BTF. Only kernel BTF (vmlinux or module) can be specified.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-11-andrii@kernel.org
Andrii Nakryiko [Thu, 3 Dec 2020 20:46:29 +0000 (12:46 -0800)]
bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier
Remove a permeating assumption thoughout BPF verifier of vmlinux BTF. Instead,
wherever BTF type IDs are involved, also track the instance of struct btf that
goes along with the type ID. This allows to gradually add support for kernel
module BTFs and using/tracking module types across BPF helper calls and
registers.
This patch also renames btf_id() function to btf_obj_id() to minimize naming
clash with using btf_id to denote BTF *type* ID, rather than BTF *object*'s ID.
Also, altough btf_vmlinux can't get destructed and thus doesn't need
refcounting, module BTFs need that, so apply BTF refcounting universally when
BPF program is using BTF-powered attachment (tp_btf, fentry/fexit, etc). This
makes for simpler clean up code.
Now that BTF type ID is not enough to uniquely identify a BTF type, extend BPF
trampoline key to include BTF object ID. To differentiate that from target
program BPF ID, set 31st bit of type ID. BTF type IDs (at least currently) are
not allowed to take full 32 bits, so there is no danger of confusing that bit
with a valid BTF type ID.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-10-andrii@kernel.org
Andrii Nakryiko [Thu, 3 Dec 2020 20:46:28 +0000 (12:46 -0800)]
selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF
Add a self-tests validating libbpf is able to perform CO-RE relocations
against the type defined in kernel module BTF. if bpf_testmod.o is not
supported by the kernel (e.g., due to version mismatch), skip tests, instead
of failing.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-9-andrii@kernel.org
Andrii Nakryiko [Thu, 3 Dec 2020 20:46:27 +0000 (12:46 -0800)]
selftests/bpf: Add support for marking sub-tests as skipped
Previously skipped sub-tests would be counted as passing with ":OK" appened
in the log. Change that to be accounted as ":SKIP".
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-8-andrii@kernel.org
Andrii Nakryiko [Thu, 3 Dec 2020 20:46:26 +0000 (12:46 -0800)]
selftests/bpf: Add bpf_testmod kernel module for testing
Add bpf_testmod module, which is conceptually out-of-tree module and provides
ways for selftests/bpf to test various kernel module-related functionality:
raw tracepoint, fentry/fexit/fmod_ret, etc. This module will be auto-loaded by
test_progs test runner and expected by some of selftests to be present and
loaded.
Pahole currently isn't able to generate BTF for static functions in kernel
modules, so make sure traced function is global.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-7-andrii@kernel.org
Andrii Nakryiko [Thu, 3 Dec 2020 20:46:25 +0000 (12:46 -0800)]
libbpf: Add kernel module BTF support for CO-RE relocations
Teach libbpf to search for candidate types for CO-RE relocations across kernel
modules BTFs, in addition to vmlinux BTF. If at least one candidate type is
found in vmlinux BTF, kernel module BTFs are not iterated. If vmlinux BTF has
no matching candidates, then find all kernel module BTFs and search for all
matching candidates across all of them.
Kernel's support for module BTFs are inferred from the support for BTF name
pointer in BPF UAPI.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-6-andrii@kernel.org
Andrii Nakryiko [Thu, 3 Dec 2020 20:46:24 +0000 (12:46 -0800)]
libbpf: Refactor CO-RE relocs to not assume a single BTF object
Refactor CO-RE relocation candidate search to not expect a single BTF, rather
return all candidate types with their corresponding BTF objects. This will
allow to extend CO-RE relocations to accommodate kernel module BTFs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-5-andrii@kernel.org
Andrii Nakryiko [Thu, 3 Dec 2020 20:46:23 +0000 (12:46 -0800)]
libbpf: Add internal helper to load BTF data by FD
Add a btf_get_from_fd() helper, which constructs struct btf from in-kernel BTF
data by FD. This is used for loading module BTFs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-4-andrii@kernel.org
Andrii Nakryiko [Thu, 3 Dec 2020 20:46:22 +0000 (12:46 -0800)]
bpf: Keep module's btf_data_size intact after load
Having real btf_data_size stored in struct module is benefitial to quickly
determine which kernel modules have associated BTF object and which don't.
There is no harm in keeping this info, as opposed to keeping invalid pointer.
Fixes:
607c543f939d ("bpf: Sanitize BTF data pointer after module is loaded")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-3-andrii@kernel.org
Andrii Nakryiko [Thu, 3 Dec 2020 20:46:21 +0000 (12:46 -0800)]
bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address()
__module_address() needs to be called with preemption disabled or with
module_mutex taken. preempt_disable() is enough for read-only uses, which is
what this fix does. Also, module_put() does internal check for NULL, so drop
it as well.
Fixes:
a38d1107f937 ("bpf: support raw tracepoints in modules")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-2-andrii@kernel.org
Alexei Starovoitov [Fri, 4 Dec 2020 01:23:24 +0000 (17:23 -0800)]
Merge branch 'Add support to set window_clamp from bpf setsockops'
Prankur gupta says:
====================
This patch contains support to set tcp window_field field from bpf setsockops.
v2: Used TCP_WINDOW_CLAMP setsockopt logic for bpf_setsockopt (review comment addressed)
v3: Created a common function for duplicated code (review comment addressed)
v4: Removing logic to pass struct sock and struct tcp_sock together (review comment addressed)
====================
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Prankur gupta [Wed, 2 Dec 2020 21:31:52 +0000 (13:31 -0800)]
selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP
Adding selftests for new added functionality to set TCP_WINDOW_CLAMP
from bpf setsockopt.
Signed-off-by: Prankur gupta <prankgup@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201202213152.435886-3-prankgup@fb.com
Prankur gupta [Wed, 2 Dec 2020 21:31:51 +0000 (13:31 -0800)]
bpf: Adds support for setting window clamp
Adds a new bpf_setsockopt for TCP sockets, TCP_BPF_WINDOW_CLAMP,
which sets the maximum receiver window size. It will be useful for
limiting receiver window based on RTT.
Signed-off-by: Prankur gupta <prankgup@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201202213152.435886-2-prankgup@fb.com
Jakub Kicinski [Thu, 3 Dec 2020 23:42:13 +0000 (15:42 -0800)]
Merge git://git./linux/kernel/git/netdev/net
Conflicts:
drivers/net/ethernet/ibm/ibmvnic.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 3 Dec 2020 21:10:11 +0000 (13:10 -0800)]
Merge tag 'net-5.10-rc7' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc7, including fixes from bpf, netfilter,
wireless drivers, wireless mesh and can.
Current release - regressions:
- mt76: usb: fix crash on device removal
Current release - always broken:
- xsk: Fix umem cleanup from wrong context in socket destruct
Previous release - regressions:
- net: ip6_gre: set dev->hard_header_len when using header_ops
- ipv4: Fix TOS mask in inet_rtm_getroute()
- net, xsk: Avoid taking multiple skbuff references
Previous release - always broken:
- net/x25: prevent a couple of overflows
- netfilter: ipset: prevent uninit-value in hash_ip6_add
- geneve: pull IP header before ECN decapsulation
- mpls: ensure LSE is pullable in TC and openvswitch paths
- vxlan: respect needed_headroom of lower device
- batman-adv: Consider fragmentation for needed packet headroom
- can: drivers: don't count arbitration loss as an error
- netfilter: bridge: reset skb->pkt_type after POST_ROUTING traversal
- inet_ecn: Fix endianness of checksum update when setting ECT(1)
- ibmvnic: fix various corner cases around reset handling
- net/mlx5: fix rejecting unsupported Connect-X6DX SW steering
- net/mlx5: Enforce HW TX csum offload with kTLS"
* tag 'net-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
net/mlx5: DR, Proper handling of unsupported Connect-X6DX SW steering
net/mlx5e: kTLS, Enforce HW TX csum offload with kTLS
net: mlx5e: fix fs_tcp.c build when IPV6 is not enabled
net/mlx5: Fix wrong address reclaim when command interface is down
net/sched: act_mpls: ensure LSE is pullable before reading it
net: openvswitch: ensure LSE is pullable before reading it
net: skbuff: ensure LSE is pullable before decrementing the MPLS ttl
net: mvpp2: Fix error return code in mvpp2_open()
chelsio/chtls: fix a double free in chtls_setkey()
rtw88: debug: Fix uninitialized memory in debugfs code
vxlan: fix error return code in __vxlan_dev_create()
net: pasemi: fix error return code in pasemi_mac_open()
cxgb3: fix error return code in t3_sge_alloc_qset()
net/x25: prevent a couple of overflows
dpaa_eth: copy timestamp fields to new skb in A-050385 workaround
net: ip6_gre: set dev->hard_header_len when using header_ops
mt76: usb: fix crash on device removal
iwlwifi: pcie: add some missing entries for AX210
iwlwifi: pcie: invert values of NO_160 device config entries
iwlwifi: pcie: add one missing entry for AX210
...
Jakub Kicinski [Thu, 3 Dec 2020 20:56:05 +0000 (12:56 -0800)]
Merge branch 'mptcp-reject-invalid-mp_join-requests-right-away'
Florian Westphal says:
====================
mptcp: reject invalid mp_join requests right away
At the moment MPTCP can detect an invalid join request (invalid token,
max number of subflows reached, and so on) right away but cannot reject
the connection until the 3WHS has completed.
Instead the connection will complete and the subflow is reset afterwards.
To send the reset most information is already available, but we don't have
good spot where the reset could be sent:
1. The ->init_req callback is too early and also doesn't allow to return an
error that could be used to inform the TCP stack that the SYN should be
dropped.
2. The ->route_req callback lacks the skb needed to send a reset.
3. The ->send_synack callback is the best fit from the available hooks,
but its called after the request socket has been inserted into the queue
already. This means we'd have to remove it again right away.
From a technical point of view, the second hook would be best:
1. Its before insertion into listener queue.
2. If it returns NULL TCP will drop the packet for us.
Problem is that we'd have to pass the skb to the function just for MPTCP.
Paolo suggested to merge init_req and route_req callbacks instead:
This makes all info available to MPTCP -- a return value of NULL drops the
packet and MPTCP can send the reset if needed.
Because 'route_req' has a 'const struct sock *', this means either removal
of const qualifier, or a bit of code churn to pass 'const' in security land.
This does the latter; I did not find any spots that need write access to struct
sock.
To recap, the two alternatives are:
1. Solve it entirely in MPTCP: use the ->send_synack callback to
unlink the request socket from the listener & drop it.
2. Avoid 'security' churn by removing the const qualifier.
====================
Link: https://lore.kernel.org/r/20201130153631.21872-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal [Mon, 30 Nov 2020 15:36:31 +0000 (16:36 +0100)]
mptcp: emit tcp reset when a join request fails
RFC 8684 says:
If the token is unknown or the host wants to refuse subflow establishment
(for example, due to a limit on the number of subflows it will permit),
the receiver will send back a reset (RST) signal, analogous to an unknown
port in TCP, containing an MP_TCPRST option (Section 3.6) with an
"MPTCP specific error" reason code.
mptcp-next doesn't support MP_TCPRST yet, this can be added in another
change.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal [Mon, 30 Nov 2020 15:36:30 +0000 (16:36 +0100)]
tcp: merge 'init_req' and 'route_req' functions
The Multipath-TCP standard (RFC 8684) says that an MPTCP host should send
a TCP reset if the token in a MP_JOIN request is unknown.
At this time we don't do this, the 3whs completes and the 'new subflow'
is reset afterwards. There are two ways to allow MPTCP to send the
reset.
1. override 'send_synack' callback and emit the rst from there.
The drawback is that the request socket gets inserted into the
listeners queue just to get removed again right away.
2. Send the reset from the 'route_req' function instead.
This avoids the 'add&remove request socket', but route_req lacks the
skb that is required to send the TCP reset.
Instead of just adding the skb to that function for MPTCP sake alone,
Paolo suggested to merge init_req and route_req functions.
This saves one indirection from syn processing path and provides the skb
to the merged function at the same time.
'send reset on unknown mptcp join token' is added in next patch.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal [Mon, 30 Nov 2020 15:36:29 +0000 (16:36 +0100)]
security: add const qualifier to struct sock in various places
A followup change to tcp_request_sock_op would have to drop the 'const'
qualifier from the 'route_req' function as the
'security_inet_conn_request' call is moved there - and that function
expects a 'struct sock *'.
However, it turns out its also possible to add a const qualifier to
security_inet_conn_request instead.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Colin Ian King [Thu, 3 Dec 2020 11:44:52 +0000 (11:44 +0000)]
samples/bpf: Fix spelling mistake "recieving" -> "receiving"
There is a spelling mistake in an error message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20201203114452.1060017-1-colin.king@canonical.com
Brendan Jackman [Thu, 3 Dec 2020 12:08:50 +0000 (12:08 +0000)]
bpf: Fix cold build of test_progs-no_alu32
This object lives inside the trunner output dir,
i.e. tools/testing/selftests/bpf/no_alu32/btf_data.o
At some point it gets copied into the parent directory during another
part of the build, but that doesn't happen when building
test_progs-no_alu32 from clean.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/bpf/20201203120850.859170-1-jackmanb@google.com
Stanislav Fomichev [Wed, 2 Dec 2020 23:13:32 +0000 (15:13 -0800)]
libbpf: Cap retries in sys_bpf_prog_load
I've seen a situation, where a process that's under pprof constantly
generates SIGPROF which prevents program loading indefinitely.
The right thing to do probably is to disable signals in the upper
layers while loading, but it still would be nice to get some error from
libbpf instead of an endless loop.
Let's add some small retry limit to the program loading:
try loading the program 5 (arbitrary) times and give up.
v2:
* 10 -> 5 retires (Andrii Nakryiko)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201202231332.3923644-1-sdf@google.com
Linus Torvalds [Thu, 3 Dec 2020 19:58:26 +0000 (11:58 -0800)]
Merge tag 's390-5.10-6' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
"One commit is fixing lockdep irq state tracing which broke with -rc6.
The other one fixes logical vs physical CPU address mixup in our PCI
code.
Summary:
- fix lockdep irq state tracing
- fix logical vs physical CPU address confusion in PCI code"
* tag 's390-5.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: fix irq state tracing
s390/pci: fix CPU address in MSI for directed IRQ
Toke Høiland-Jørgensen [Thu, 3 Dec 2020 09:33:06 +0000 (10:33 +0100)]
libbpf: Sanitise map names before pinning
When we added sanitising of map names before loading programs to libbpf, we
still allowed periods in the name. While the kernel will accept these for
the map names themselves, they are not allowed in file names when pinning
maps. This means that bpf_object__pin_maps() will fail if called on an
object that contains internal maps (such as sections .rodata).
Fix this by replacing periods with underscores when constructing map pin
paths. This only affects the paths generated by libbpf when
bpf_object__pin_maps() is called with a path argument. Any pin paths set
by bpf_map__set_pin_path() are unaffected, and it will still be up to the
caller to avoid invalid characters in those.
Fixes:
113e6b7e15e2 ("libbpf: Sanitise internal map names so they are not rejected by the kernel")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201203093306.107676-1-toke@redhat.com
Linus Torvalds [Thu, 3 Dec 2020 19:47:13 +0000 (11:47 -0800)]
Merge tag '9p-for-5.10-rc7' of git://github.com/martinetd/linux
Pull 9p fixes from Dominique Martinet:
"Restore splice functionality for 9p"
* tag '9p-for-5.10-rc7' of git://github.com/martinetd/linux:
fs: 9p: add generic splice_write file operation
fs: 9p: add generic splice_read file operations
Andrei Matei [Thu, 3 Dec 2020 04:34:10 +0000 (23:34 -0500)]
libbpf: Fail early when loading programs with unspecified type
Before this patch, a program with unspecified type
(BPF_PROG_TYPE_UNSPEC) would be passed to the BPF syscall, only to have
the kernel reject it with an opaque invalid argument error. This patch
makes libbpf reject such programs with a nicer error message - in
particular libbpf now tries to diagnose bad ELF section names at both
open time and load time.
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201203043410.59699-1-andreimatei1@gmail.com
Andrii Nakryiko [Thu, 3 Dec 2020 19:20:21 +0000 (11:20 -0800)]
Merge branch 'Fixes for ima selftest'
KP Singh says:
====================
From: KP Singh <kpsingh@google.com>
# v3 -> v4
* Fix typos.
* Update commit message for the indentation patch.
* Added Andrii's acks.
# v2 -> v3
* Added missing tags.
* Indentation fixes + some other fixes suggested by Andrii.
* Re-indent file to tabs.
The selftest for the bpf_ima_inode_hash helper uses a shell script to
setup the system for ima. While this worked without an issue on recent
desktop distros, it failed on environments with stripped out shells like
busybox which is also used by the bpf CI.
This series fixes the assumptions made on the availablity of certain
command line switches and the expectation that securityfs being mounted
by default.
It also adds the missing kernel config dependencies in
tools/testing/selftests/bpf and, lastly, changes the indentation of
ima_setup.sh to use tabs.
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
KP Singh [Thu, 3 Dec 2020 19:14:37 +0000 (19:14 +0000)]
selftests/bpf: Indent ima_setup.sh with tabs.
The file was formatted with spaces instead of tabs and went unnoticed
as checkpatch.pl did not complain (probably because this is a shell
script). Re-indent it with tabs to be consistent with other scripts.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201203191437.666737-5-kpsingh@chromium.org
KP Singh [Thu, 3 Dec 2020 19:14:36 +0000 (19:14 +0000)]
selftests/bpf: Add config dependency on BLK_DEV_LOOP
The ima selftest restricts its scope to a test filesystem image
mounted on a loop device and prevents permanent ima policy changes for
the whole system.
Fixes:
34b82d3ac105 ("bpf: Add a selftest for bpf_ima_inode_hash")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201203191437.666737-4-kpsingh@chromium.org
KP Singh [Thu, 3 Dec 2020 19:14:35 +0000 (19:14 +0000)]
selftests/bpf: Ensure securityfs mount before writing ima policy
SecurityFS may not be mounted even if it is enabled in the kernel
config. So, check if the mount exists in /proc/mounts by parsing the
file and, if not, mount it on /sys/kernel/security.
Fixes:
34b82d3ac105 ("bpf: Add a selftest for bpf_ima_inode_hash")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201203191437.666737-3-kpsingh@chromium.org
KP Singh [Thu, 3 Dec 2020 19:14:34 +0000 (19:14 +0000)]
selftests/bpf: Update ima_setup.sh for busybox
losetup on busybox does not output the name of loop device on using
-f with --show. It also doesn't support -j to find the loop devices
for a given backing file. losetup is updated to use "-a" which is
available on busybox.
blkid does not support options (-s and -o) to only display the uuid, so
parse the output instead.
Not all environments have mkfs.ext4, the test requires a loop device
with a backing image file which could formatted with any filesystem.
Update to using mkfs.ext2 which is available on busybox.
Fixes:
34b82d3ac105 ("bpf: Add a selftest for bpf_ima_inode_hash")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201203191437.666737-2-kpsingh@chromium.org
Jakub Kicinski [Thu, 3 Dec 2020 19:18:37 +0000 (11:18 -0800)]
Merge branch 'mlx5-fixes-2020-12-01'
Saeed Mahameed says:
====================
mlx5 fixes 2020-12-01
This series introduces some fixes to mlx5 driver.
====================
Link: https://lore.kernel.org/r/20201203043946.235385-1-saeedm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / platform / kernel / linux-starfive.git / log